aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.9/950-0021-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.9/950-0021-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch')
-rw-r--r--target/linux/brcm2708/patches-4.9/950-0021-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch37
1 files changed, 37 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.9/950-0021-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch b/target/linux/brcm2708/patches-4.9/950-0021-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch
new file mode 100644
index 0000000000..dfa312bc37
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.9/950-0021-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch
@@ -0,0 +1,37 @@
+From 599e7165ec6477139dae4f32a12e8d49d5dd8859 Mon Sep 17 00:00:00 2001
+From: Eric Anholt <eric@anholt.net>
+Date: Mon, 9 May 2016 17:28:18 -0700
+Subject: [PATCH] clk: bcm2835: Mark GPIO clocks enabled at boot as critical.
+
+These divide off of PLLD_PER and are used for the ethernet and wifi
+PHYs source PLLs. Neither of them is currently represented by a phy
+device that would grab the clock for us.
+
+This keeps other drivers from killing the networking PHYs when they
+disable their own clocks and trigger PLLD_PER's refcount going to 0.
+
+v2: Skip marking as critical if they aren't on at boot.
+
+Signed-off-by: Eric Anholt <eric@anholt.net>
+---
+ drivers/clk/bcm/clk-bcm2835.c | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+--- a/drivers/clk/bcm/clk-bcm2835.c
++++ b/drivers/clk/bcm/clk-bcm2835.c
+@@ -1262,6 +1262,15 @@ static struct clk_hw *bcm2835_register_c
+ init.name = data->name;
+ init.flags = data->flags | CLK_IGNORE_UNUSED;
+
++ /*
++ * Some GPIO clocks for ethernet/wifi PLLs are marked as
++ * critical (since some platforms use them), but if the
++ * firmware didn't have them turned on then they clearly
++ * aren't actually critical.
++ */
++ if ((cprman_read(cprman, data->ctl_reg) & CM_ENABLE) == 0)
++ init.flags &= ~CLK_IS_CRITICAL;
++
+ if (data->is_vpu_clock) {
+ init.ops = &bcm2835_vpu_clock_clk_ops;
+ } else {