1 files changed, 0 insertions, 91 deletions
diff --git a/target/linux/brcm2708/patches-4.9/031-v4.10-0011-ARM-bcm2835-Add-names-for-the-RPi-Zero-GPIO-lines.patch b/target/linux/brcm2708/patches-4.9/031-v4.10-0011-ARM-bcm2835-Add-names-for-the-RPi-Zero-GPIO-lines.patch
deleted file mode 100644
index 5beef8ecb9..0000000000
--- a/target/linux/brcm2708/patches-4.9/031-v4.10-0011-ARM-bcm2835-Add-names-for-the-RPi-Zero-GPIO-lines.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From 3a1689ea752436917c5ce4487527ed6c444630ee Mon Sep 17 00:00:00 2001
-From: Stefan Wahren <stefan.wahren@i2se.com>
-Date: Wed, 16 Nov 2016 17:52:07 +0000
-Subject: [PATCH] ARM: bcm2835: Add names for the RPi Zero GPIO lines
-
-This adds the GPIO names for the Raspberry Pi Zero. The GPIO lines
-of the RPi Zero are almost identical to the Model A+ except:
-
-* GPIO 35, 38, 40 and 45 are not connected
-* Status LED is active low
-
-Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
-Signed-off-by: Eric Anholt <eric@anholt.net>
----
- arch/arm/boot/dts/bcm2835-rpi-zero.dts | 65 ++++++++++++++++++++++++++++++++++
- 1 file changed, 65 insertions(+)
-
---- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
-@@ -26,6 +26,71 @@
- };
- 
- &gpio {
-+	/*
-+	 * This is based on the official GPU firmware DT blob.
-+	 *
-+	 * Legend:
-+	 * "NC" = not connected (no rail from the SoC)
-+	 * "FOO" = GPIO line named "FOO" on the schematic
-+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-+	 */
-+	gpio-line-names = "SDA0",
-+			  "SCL0",
-+			  "SDA1",
-+			  "SCL1",
-+			  "GPIO_GCLK",
-+			  "GPIO5",
-+			  "GPIO6",
-+			  "SPI_CE1_N",
-+			  "SPI_CE0_N",
-+			  "SPI_MISO",
-+			  "SPI_MOSI",
-+			  "SPI_SCLK",
-+			  "GPIO12",
-+			  "GPIO13",
-+			  /* Serial port */
-+			  "TXD0",
-+			  "RXD0",
-+			  "GPIO16",
-+			  "GPIO17",
-+			  "GPIO18",
-+			  "GPIO19",
-+			  "GPIO20",
-+			  "GPIO21",
-+			  "GPIO22",
-+			  "GPIO23",
-+			  "GPIO24",
-+			  "GPIO25",
-+			  "GPIO26",
-+			  "GPIO27",
-+			  "SDA0",
-+			  "SCL0",
-+			  "NC", /* GPIO30 */
-+			  "NC", /* GPIO31 */
-+			  "CAM_GPIO1", /* GPIO32 */
-+			  "NC", /* GPIO33 */
-+			  "NC", /* GPIO34 */
-+			  "NC", /* GPIO35 */
-+			  "NC", /* GPIO36 */
-+			  "NC", /* GPIO37 */
-+			  "NC", /* GPIO38 */
-+			  "NC", /* GPIO39 */
-+			  "NC", /* GPIO40 */
-+			  "CAM_GPIO0", /* GPIO41 */
-+			  "NC", /* GPIO42 */
-+			  "NC", /* GPIO43 */
-+			  "NC", /* GPIO44 */
-+			  "NC", /* GPIO45 */
-+			  "HDMI_HPD_N",
-+			  "STATUS_LED_N",
-+			  /* Used by SD Card */
-+			  "SD_CLK_R",
-+			  "SD_CMD_R",
-+			  "SD_DATA0_R",
-+			  "SD_DATA1_R",
-+			  "SD_DATA2_R",
-+			  "SD_DATA3_R";
-+
- 	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
- 
- 	/* I2S interface */