1 files changed, 0 insertions, 93 deletions
diff --git a/target/linux/brcm2708/patches-4.9/031-v4.10-0010-ARM-bcm2835-Fix-names-for-the-Raspberry-Pi-GPIO-line.patch b/target/linux/brcm2708/patches-4.9/031-v4.10-0010-ARM-bcm2835-Fix-names-for-the-Raspberry-Pi-GPIO-line.patch
deleted file mode 100644
index 83448f2394..0000000000
--- a/target/linux/brcm2708/patches-4.9/031-v4.10-0010-ARM-bcm2835-Fix-names-for-the-Raspberry-Pi-GPIO-line.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 6b9170887e1b912b657dab4597f8b44ae4dbdf50 Mon Sep 17 00:00:00 2001
-From: Stefan Wahren <stefan.wahren@i2se.com>
-Date: Wed, 16 Nov 2016 17:52:06 +0000
-Subject: [PATCH] ARM: bcm2835: Fix names for the Raspberry Pi GPIO lines
-
-There are some differences between the schematics and the official firmware
-DTS [1]. So based on these additional information the following has been
-changed:
-
-* use consistent "CAM_GPIO1" for camera LED
-* use consistent "CAM_GPIO0" for camera shutdown
-* add "USB_LIMIT" for USB current limit (0=600mA, 1=1200mA)
-
-[1] - https://github.com/raspberrypi/firmware/blob/master/extra/dt-blob.dts
-
-Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
-Signed-off-by: Eric Anholt <eric@anholt.net>
----
- arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 4 ++--
- arch/arm/boot/dts/bcm2835-rpi-a.dts      | 4 ++--
- arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 2 +-
- arch/arm/boot/dts/bcm2835-rpi-b.dts      | 4 ++--
- 4 files changed, 7 insertions(+), 7 deletions(-)
-
---- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
-@@ -63,13 +63,13 @@
- 			  "SCL0",
- 			  "NC", /* GPIO30 */
- 			  "NC", /* GPIO31 */
--			  "NC", /* GPIO32 */
-+			  "CAM_GPIO1", /* GPIO32 */
- 			  "NC", /* GPIO33 */
- 			  "NC", /* GPIO34 */
- 			  "PWR_LOW_N", /* GPIO35 */
- 			  "NC", /* GPIO36 */
- 			  "NC", /* GPIO37 */
--			  "NC", /* GPIO38 */
-+			  "USB_LIMIT", /* GPIO38 */
- 			  "NC", /* GPIO39 */
- 			  "PWM0_OUT", /* GPIO40 */
- 			  "CAM_GPIO0", /* GPIO41 */
---- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
-@@ -29,7 +29,7 @@
- 			  "SDA1",
- 			  "SCL1",
- 			  "GPIO_GCLK",
--			  "CAM_CLK",
-+			  "CAM_GPIO1",
- 			  "LAN_RUN",
- 			  "SPI_CE1_N",
- 			  "SPI_CE0_N",
-@@ -52,7 +52,7 @@
- 			  "GPIO24",
- 			  "GPIO25",
- 			  "NC", /* GPIO26 */
--			  "CAM_GPIO",
-+			  "CAM_GPIO0",
- 			  /* Binary number representing build/revision */
- 			  "CONFIG0",
- 			  "CONFIG1",
---- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
-@@ -71,7 +71,7 @@
- 			  "PWR_LOW_N", /* GPIO35 */
- 			  "NC", /* GPIO36 */
- 			  "NC", /* GPIO37 */
--			  "NC", /* GPIO38 */
-+			  "USB_LIMIT", /* GPIO38 */
- 			  "NC", /* GPIO39 */
- 			  "PWM0_OUT", /* GPIO40 */
- 			  "CAM_GPIO0", /* GPIO41 */
---- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
-@@ -30,7 +30,7 @@
- 			  "SDA1",
- 			  "SCL1",
- 			  "GPIO_GCLK",
--			  "CAM_CLK",
-+			  "CAM_GPIO1",
- 			  "LAN_RUN",
- 			  "SPI_CE1_N",
- 			  "SPI_CE0_N",
-@@ -53,7 +53,7 @@
- 			  "GPIO24",
- 			  "GPIO25",
- 			  "NC", /* GPIO26 */
--			  "CAM_GPIO",
-+			  "CAM_GPIO0",
- 			  /* Binary number representing build/revision */
- 			  "CONFIG0",
- 			  "CONFIG1",