1 files changed, 0 insertions, 84 deletions
diff --git a/target/linux/brcm2708/patches-4.4/0446-BCM270X-Add-the-DSI-and-DSI-panel-nodes-to-the-VC4-o.patch b/target/linux/brcm2708/patches-4.4/0446-BCM270X-Add-the-DSI-and-DSI-panel-nodes-to-the-VC4-o.patch
deleted file mode 100644
index 44f29ddea0..0000000000
--- a/target/linux/brcm2708/patches-4.4/0446-BCM270X-Add-the-DSI-and-DSI-panel-nodes-to-the-VC4-o.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From 64871d96e1d387437fa52d8398f2212722890bcd Mon Sep 17 00:00:00 2001
-From: Eric Anholt <eric@anholt.net>
-Date: Thu, 2 Jun 2016 15:09:35 -0700
-Subject: [PATCH] BCM270X: Add the DSI and DSI panel nodes to the VC4 overlay.
-
-Signed-off-by: Eric Anholt <eric@anholt.net>
----
- arch/arm/boot/dts/bcm2708_common.dtsi              | 24 ++++++++++++++++++++--
- arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts | 16 +++++++++++++++
- 2 files changed, 38 insertions(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm2708_common.dtsi
-+++ b/arch/arm/boot/dts/bcm2708_common.dtsi
-@@ -2,6 +2,7 @@
- #include <dt-bindings/clock/bcm2835-aux.h>
- #include "dt-bindings/power/raspberrypi-power.h"
- #include "dt-bindings/gpio/gpio.h"
-+#include "dt-bindings/pinctrl/bcm2835.h"
- #include "skeleton.dtsi"
- 
- / {
-@@ -110,9 +111,10 @@
- 			reg = <0x7e101000 0x2000>;
- 
- 			/* CPRMAN derives everything from the platform's
--			 * oscillator.
-+			 * oscillator except for a few clocks that may
-+			 * derive from something else derived from CPRMAN..
- 			 */
--			clocks = <&clk_osc>;
-+			clocks = <&clk_osc>, <&dsi1 0>, <&dsi1 1>, <&dsi1 2>;
- 			status = "disabled";
- 		};
- 
-@@ -282,6 +284,24 @@
- 			status = "disabled";
- 		};
- 
-+		dsi1: dsi@7e700000 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			#clock-cells = <1>;
-+
-+			compatible = "brcm,bcm2835-dsi1";
-+			reg = <0x7e700000 0x8c>;
-+			interrupts = <2 12>;
-+
-+			clocks = <&cprman BCM2835_PLLD_DSI1>,
-+				 <&cprman BCM2835_CLOCK_DSI1E>,
-+				 <&cprman BCM2835_CLOCK_DSI1P>;
-+			clock-names = "phy", "escape", "pixel";
-+			clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr";
-+			status = "disabled";
-+			power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
-+		};
-+
- 		i2c1: i2c@7e804000 {
- 			compatible = "brcm,bcm2708-i2c";
- 			reg = <0x7e804000 0x1000>;
---- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts
-@@ -126,6 +126,22 @@
- 		};
- 	};
- 
-+	fragment@16 {
-+		target = <&dsi1>;
-+		__overlay__  {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "okay";
-+
-+			brcm,panel = <&pitouchscreen>;
-+
-+			pitouchscreen: panel {
-+				compatible = "raspberrypi,touchscreen";
-+				reg = <0>;
-+			};
-+		};
-+	};
-+
- 	__overrides__ {
- 		cma-256 = <0>,"+0-1-2-3-4";
- 		cma-192 = <0>,"-0+1-2-3-4";