aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.4/0415-bcm2835-sdhost-Improvements-to-error-recovery.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.4/0415-bcm2835-sdhost-Improvements-to-error-recovery.patch')
-rw-r--r--target/linux/brcm2708/patches-4.4/0415-bcm2835-sdhost-Improvements-to-error-recovery.patch312
1 files changed, 0 insertions, 312 deletions
diff --git a/target/linux/brcm2708/patches-4.4/0415-bcm2835-sdhost-Improvements-to-error-recovery.patch b/target/linux/brcm2708/patches-4.4/0415-bcm2835-sdhost-Improvements-to-error-recovery.patch
deleted file mode 100644
index 88d9d4db50..0000000000
--- a/target/linux/brcm2708/patches-4.4/0415-bcm2835-sdhost-Improvements-to-error-recovery.patch
+++ /dev/null
@@ -1,312 +0,0 @@
-From edeb743e7562d9fa4d5f19c557bf558036031973 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Wed, 15 Jun 2016 17:13:55 +0100
-Subject: [PATCH] bcm2835-sdhost: Improvements to error recovery
-
-1) Try to avoid reducing overclock when a card is removed.
-
-2) Reset overclock on card insertion.
-
-3) Reduce logging when errors occur, lowering the severity of
- some messages and making others conditional on the debug
- flag.
-
-4) Attempt to identify a disconnected SD bus earlier, treating a
- zero returned OCR (voltage support) as an error condition.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- drivers/mmc/host/bcm2835-sdhost.c | 117 ++++++++++++++++++++++++--------------
- 1 file changed, 74 insertions(+), 43 deletions(-)
-
---- a/drivers/mmc/host/bcm2835-sdhost.c
-+++ b/drivers/mmc/host/bcm2835-sdhost.c
-@@ -38,6 +38,7 @@
- #include <linux/mmc/mmc.h>
- #include <linux/mmc/host.h>
- #include <linux/mmc/sd.h>
-+#include <linux/mmc/sdio.h>
- #include <linux/scatterlist.h>
- #include <linux/of_address.h>
- #include <linux/of_irq.h>
-@@ -206,6 +207,7 @@ struct bcm2835_host {
- struct timeval stop_time; /* when the last stop was issued */
- u32 delay_after_stop; /* minimum time between stop and subsequent data transfer */
- u32 delay_after_this_stop; /* minimum time between this stop and subsequent data transfer */
-+ u32 user_overclock_50; /* User's preferred frequency to use when 50MHz is requested (in MHz) */
- u32 overclock_50; /* frequency to use when 50MHz is requested (in MHz) */
- u32 overclock; /* Current frequency if overclocked, else zero */
- u32 pio_limit; /* Maximum block count for PIO (0 = always DMA) */
-@@ -282,7 +284,7 @@ static void log_dump(void)
- do {
- entry = sdhost_log_buf + idx;
- if (entry->event[0] != '\0')
-- pr_err("[%08x] %.4s %x %x\n",
-+ pr_info("[%08x] %.4s %x %x\n",
- entry->timestamp,
- entry->event,
- entry->param1,
-@@ -324,7 +326,7 @@ static void bcm2835_sdhost_dumpcmd(struc
- const char *label)
- {
- if (cmd)
-- pr_err("%s:%c%s op %d arg 0x%x flags 0x%x - resp %08x %08x %08x %08x, err %d\n",
-+ pr_info("%s:%c%s op %d arg 0x%x flags 0x%x - resp %08x %08x %08x %08x, err %d\n",
- mmc_hostname(host->mmc),
- (cmd == host->cmd) ? '>' : ' ',
- label, cmd->opcode, cmd->arg, cmd->flags,
-@@ -339,7 +341,7 @@ static void bcm2835_sdhost_dumpregs(stru
- bcm2835_sdhost_dumpcmd(host, host->mrq->sbc, "sbc");
- bcm2835_sdhost_dumpcmd(host, host->mrq->cmd, "cmd");
- if (host->mrq->data)
-- pr_err("%s: data blocks %x blksz %x - err %d\n",
-+ pr_info("%s: data blocks %x blksz %x - err %d\n",
- mmc_hostname(host->mmc),
- host->mrq->data->blocks,
- host->mrq->data->blksz,
-@@ -347,53 +349,53 @@ static void bcm2835_sdhost_dumpregs(stru
- bcm2835_sdhost_dumpcmd(host, host->mrq->stop, "stop");
- }
-
-- pr_err("%s: =========== REGISTER DUMP ===========\n",
-+ pr_info("%s: =========== REGISTER DUMP ===========\n",
- mmc_hostname(host->mmc));
-
-- pr_err("%s: SDCMD 0x%08x\n",
-+ pr_info("%s: SDCMD 0x%08x\n",
- mmc_hostname(host->mmc),
- bcm2835_sdhost_read(host, SDCMD));
-- pr_err("%s: SDARG 0x%08x\n",
-+ pr_info("%s: SDARG 0x%08x\n",
- mmc_hostname(host->mmc),
- bcm2835_sdhost_read(host, SDARG));
-- pr_err("%s: SDTOUT 0x%08x\n",
-+ pr_info("%s: SDTOUT 0x%08x\n",
- mmc_hostname(host->mmc),
- bcm2835_sdhost_read(host, SDTOUT));
-- pr_err("%s: SDCDIV 0x%08x\n",
-+ pr_info("%s: SDCDIV 0x%08x\n",
- mmc_hostname(host->mmc),
- bcm2835_sdhost_read(host, SDCDIV));
-- pr_err("%s: SDRSP0 0x%08x\n",
-+ pr_info("%s: SDRSP0 0x%08x\n",
- mmc_hostname(host->mmc),
- bcm2835_sdhost_read(host, SDRSP0));
-- pr_err("%s: SDRSP1 0x%08x\n",
-+ pr_info("%s: SDRSP1 0x%08x\n",
- mmc_hostname(host->mmc),
- bcm2835_sdhost_read(host, SDRSP1));
-- pr_err("%s: SDRSP2 0x%08x\n",
-+ pr_info("%s: SDRSP2 0x%08x\n",
- mmc_hostname(host->mmc),
- bcm2835_sdhost_read(host, SDRSP2));
- pr_err("%s: SDRSP3 0x%08x\n",
- mmc_hostname(host->mmc),
- bcm2835_sdhost_read(host, SDRSP3));
-- pr_err("%s: SDHSTS 0x%08x\n",
-+ pr_info("%s: SDHSTS 0x%08x\n",
- mmc_hostname(host->mmc),
- bcm2835_sdhost_read(host, SDHSTS));
-- pr_err("%s: SDVDD 0x%08x\n",
-+ pr_info("%s: SDVDD 0x%08x\n",
- mmc_hostname(host->mmc),
- bcm2835_sdhost_read(host, SDVDD));
-- pr_err("%s: SDEDM 0x%08x\n",
-+ pr_info("%s: SDEDM 0x%08x\n",
- mmc_hostname(host->mmc),
- bcm2835_sdhost_read(host, SDEDM));
-- pr_err("%s: SDHCFG 0x%08x\n",
-+ pr_info("%s: SDHCFG 0x%08x\n",
- mmc_hostname(host->mmc),
- bcm2835_sdhost_read(host, SDHCFG));
-- pr_err("%s: SDHBCT 0x%08x\n",
-+ pr_info("%s: SDHBCT 0x%08x\n",
- mmc_hostname(host->mmc),
- bcm2835_sdhost_read(host, SDHBCT));
-- pr_err("%s: SDHBLC 0x%08x\n",
-+ pr_info("%s: SDHBLC 0x%08x\n",
- mmc_hostname(host->mmc),
- bcm2835_sdhost_read(host, SDHBLC));
-
-- pr_err("%s: ===========================================\n",
-+ pr_info("%s: ===========================================\n",
- mmc_hostname(host->mmc));
- }
-
-@@ -608,7 +610,7 @@ static void bcm2835_sdhost_read_block_pi
- (fsm_state != SDEDM_FSM_READCRC)) {
- hsts = bcm2835_sdhost_read(host,
- SDHSTS);
-- pr_err("%s: fsm %x, hsts %x\n",
-+ pr_info("%s: fsm %x, hsts %x\n",
- mmc_hostname(host->mmc),
- fsm_state, hsts);
- if (hsts & SDHSTS_ERROR_MASK)
-@@ -698,7 +700,7 @@ static void bcm2835_sdhost_write_block_p
- (fsm_state != SDEDM_FSM_WRITESTART2)) {
- hsts = bcm2835_sdhost_read(host,
- SDHSTS);
-- pr_err("%s: fsm %x, hsts %x\n",
-+ pr_info("%s: fsm %x, hsts %x\n",
- mmc_hostname(host->mmc),
- fsm_state, hsts);
- if (hsts & SDHSTS_ERROR_MASK)
-@@ -953,9 +955,10 @@ bool bcm2835_sdhost_send_command(struct
-
- while (bcm2835_sdhost_read(host, SDCMD) & SDCMD_NEW_FLAG) {
- if (timeout == 0) {
-- pr_err("%s: previous command never completed.\n",
-+ pr_warn("%s: previous command never completed.\n",
- mmc_hostname(host->mmc));
-- bcm2835_sdhost_dumpregs(host);
-+ if (host->debug)
-+ bcm2835_sdhost_dumpregs(host);
- cmd->error = -EILSEQ;
- tasklet_schedule(&host->finish_tasklet);
- return false;
-@@ -1213,10 +1216,12 @@ static void bcm2835_sdhost_finish_comman
-
- /* Check for errors */
- if (sdcmd & SDCMD_NEW_FLAG) {
-- pr_err("%s: command never completed.\n",
-- mmc_hostname(host->mmc));
-- bcm2835_sdhost_dumpregs(host);
-- host->cmd->error = -EIO;
-+ if (host->debug) {
-+ pr_err("%s: command %d never completed.\n",
-+ mmc_hostname(host->mmc), host->cmd->opcode);
-+ bcm2835_sdhost_dumpregs(host);
-+ }
-+ host->cmd->error = -EILSEQ;
- tasklet_schedule(&host->finish_tasklet);
- return;
- } else if (sdcmd & SDCMD_FAIL_FLAG) {
-@@ -1238,15 +1243,14 @@ static void bcm2835_sdhost_finish_comman
- } else {
- if (sdhsts & SDHSTS_CMD_TIME_OUT) {
- if (host->debug)
-- pr_err("%s: command %d timeout\n",
-+ pr_warn("%s: command %d timeout\n",
- mmc_hostname(host->mmc),
- host->cmd->opcode);
- host->cmd->error = -ETIMEDOUT;
- } else {
-- pr_err("%s: unexpected command %d error\n",
-+ pr_warn("%s: unexpected command %d error\n",
- mmc_hostname(host->mmc),
- host->cmd->opcode);
-- bcm2835_sdhost_dumpregs(host);
- host->cmd->error = -EILSEQ;
- }
- tasklet_schedule(&host->finish_tasklet);
-@@ -1370,8 +1374,10 @@ static void bcm2835_sdhost_busy_irq(stru
- } else if (intmask & SDHSTS_CMD_TIME_OUT)
- host->cmd->error = -ETIMEDOUT;
-
-- log_dump();
-- bcm2835_sdhost_dumpregs(host);
-+ if (host->debug) {
-+ log_dump();
-+ bcm2835_sdhost_dumpregs(host);
-+ }
- }
- else
- bcm2835_sdhost_finish_command(host, NULL);
-@@ -1595,7 +1601,7 @@ void bcm2835_sdhost_set_clock(struct bcm
- host->overclock_50 = (clock/MHZ);
-
- if (clock != host->overclock) {
-- pr_warn("%s: overclocking to %dHz\n",
-+ pr_info("%s: overclocking to %dHz\n",
- mmc_hostname(host->mmc), clock);
- host->overclock = clock;
- }
-@@ -1605,6 +1611,11 @@ void bcm2835_sdhost_set_clock(struct bcm
- pr_warn("%s: cancelling overclock\n",
- mmc_hostname(host->mmc));
- }
-+ } else if (input_clock == 0) {
-+ /* Reset the preferred overclock when the clock is stopped.
-+ * This always happens during initialisation. */
-+ host->overclock_50 = host->user_overclock_50;
-+ host->overclock = 0;
- }
-
- /* Set the timeout to 500ms */
-@@ -1678,13 +1689,15 @@ static void bcm2835_sdhost_request(struc
- log_event("REQ<", (u32)mrq, edm);
- if ((fsm != SDEDM_FSM_IDENTMODE) &&
- (fsm != SDEDM_FSM_DATAMODE)) {
-- pr_err("%s: previous command (%d) not complete (EDM %x)\n",
-- mmc_hostname(host->mmc),
-- bcm2835_sdhost_read(host, SDCMD) & SDCMD_CMD_MASK,
-- edm);
- log_event("REQ!", (u32)mrq, edm);
-- log_dump();
-- bcm2835_sdhost_dumpregs(host);
-+ if (host->debug) {
-+ pr_warn("%s: previous command (%d) not complete (EDM %x)\n",
-+ mmc_hostname(host->mmc),
-+ bcm2835_sdhost_read(host, SDCMD) & SDCMD_CMD_MASK,
-+ edm);
-+ log_dump();
-+ bcm2835_sdhost_dumpregs(host);
-+ }
- mrq->cmd->error = -EILSEQ;
- tasklet_schedule(&host->finish_tasklet);
- mmiowb();
-@@ -1814,16 +1827,19 @@ static void bcm2835_sdhost_tasklet_finis
- mrq = host->mrq;
-
- /* Drop the overclock after any data corruption, or after any
-- error overclocked */
-+ * error while overclocked. Ignore errors for status commands,
-+ * as they are likely when a card is ejected. */
- if (host->overclock) {
-- if ((mrq->cmd && mrq->cmd->error) ||
-+ if ((mrq->cmd && mrq->cmd->error &&
-+ (mrq->cmd->opcode != MMC_SEND_STATUS)) ||
- (mrq->data && mrq->data->error) ||
-- (mrq->stop && mrq->stop->error)) {
-+ (mrq->stop && mrq->stop->error) ||
-+ (mrq->sbc && mrq->sbc->error)) {
- host->overclock_50--;
- pr_warn("%s: reducing overclock due to errors\n",
- mmc_hostname(host->mmc));
- host->reset_clock = 1;
-- mrq->cmd->error = -EILSEQ;
-+ mrq->cmd->error = -ETIMEDOUT;
- mrq->cmd->retries = 1;
- }
- }
-@@ -1848,6 +1864,21 @@ static void bcm2835_sdhost_tasklet_finis
- mmc_hostname(host->mmc), err);
- }
-
-+ /* The SDHOST block doesn't report any errors for a disconnected
-+ interface. All cards and SDIO devices should report some supported
-+ voltage range, so a zero response to SEND_OP_COND, IO_SEND_OP_COND
-+ or APP_SEND_OP_COND can be treated as an error. */
-+ if (((mrq->cmd->opcode == MMC_SEND_OP_COND) ||
-+ (mrq->cmd->opcode == SD_IO_SEND_OP_COND) ||
-+ (mrq->cmd->opcode == SD_APP_OP_COND)) &&
-+ (mrq->cmd->error == 0) &&
-+ (mrq->cmd->resp[0] == 0)) {
-+ mrq->cmd->error = -ETIMEDOUT;
-+ if (host->debug)
-+ pr_info("%s: faking timeout due to zero OCR\n",
-+ mmc_hostname(host->mmc));
-+ }
-+
- mmc_request_done(host->mmc, mrq);
- log_event("TSK>", (u32)mrq, 0);
- }
-@@ -2023,7 +2054,7 @@ static int bcm2835_sdhost_probe(struct p
- &host->delay_after_stop);
- of_property_read_u32(node,
- "brcm,overclock-50",
-- &host->overclock_50);
-+ &host->user_overclock_50);
- of_property_read_u32(node,
- "brcm,pio-limit",
- &host->pio_limit);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 21:01:51 +0000