aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.4/0391-Revert-dmaengine-bcm2835-Add-slave-dma-support.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.4/0391-Revert-dmaengine-bcm2835-Add-slave-dma-support.patch')
-rw-r--r--target/linux/brcm2708/patches-4.4/0391-Revert-dmaengine-bcm2835-Add-slave-dma-support.patch312
1 files changed, 0 insertions, 312 deletions
diff --git a/target/linux/brcm2708/patches-4.4/0391-Revert-dmaengine-bcm2835-Add-slave-dma-support.patch b/target/linux/brcm2708/patches-4.4/0391-Revert-dmaengine-bcm2835-Add-slave-dma-support.patch
deleted file mode 100644
index 08b375b0dc..0000000000
--- a/target/linux/brcm2708/patches-4.4/0391-Revert-dmaengine-bcm2835-Add-slave-dma-support.patch
+++ /dev/null
@@ -1,312 +0,0 @@
-From 7ed4a7651d05de05a1caaa2617255a23ac7f78b1 Mon Sep 17 00:00:00 2001
-From: Martin Sperl <kernel@martin.sperl.org>
-Date: Fri, 22 Apr 2016 17:17:37 +0000
-Subject: [PATCH] Revert "dmaengine: bcm2835: Add slave dma support"
-
-This reverts commit 8a349301238aabb40c9da5ca8c8492b6b8d146f6.
----
- drivers/dma/bcm2835-dma.c | 206 ++++------------------------------------------
- 1 file changed, 14 insertions(+), 192 deletions(-)
-
---- a/drivers/dma/bcm2835-dma.c
-+++ b/drivers/dma/bcm2835-dma.c
-@@ -1,10 +1,11 @@
- /*
- * BCM2835 DMA engine support
- *
-+ * This driver only supports cyclic DMA transfers
-+ * as needed for the I2S module.
-+ *
- * Author: Florian Meier <florian.meier@koalo.de>
- * Copyright 2013
-- * Gellert Weisz <gellert@raspberrypi.org>
-- * Copyright 2013-2014
- *
- * Based on
- * OMAP DMAengine support by Russell King
-@@ -94,8 +95,6 @@ struct bcm2835_desc {
- size_t size;
- };
-
--#define BCM2835_DMA_WAIT_CYCLES 0 /* Slow down DMA transfers: 0-31 */
--
- #define BCM2835_DMA_CS 0x00
- #define BCM2835_DMA_ADDR 0x04
- #define BCM2835_DMA_SOURCE_AD 0x0c
-@@ -112,16 +111,12 @@ struct bcm2835_desc {
- #define BCM2835_DMA_RESET BIT(31) /* WO, self clearing */
-
- #define BCM2835_DMA_INT_EN BIT(0)
--#define BCM2835_DMA_WAIT_RESP BIT(3)
- #define BCM2835_DMA_D_INC BIT(4)
--#define BCM2835_DMA_D_WIDTH BIT(5)
- #define BCM2835_DMA_D_DREQ BIT(6)
- #define BCM2835_DMA_S_INC BIT(8)
--#define BCM2835_DMA_S_WIDTH BIT(9)
- #define BCM2835_DMA_S_DREQ BIT(10)
-
- #define BCM2835_DMA_PER_MAP(x) ((x) << 16)
--#define BCM2835_DMA_WAITS(x) (((x) & 0x1f) << 21)
-
- #define BCM2835_DMA_DATA_TYPE_S8 1
- #define BCM2835_DMA_DATA_TYPE_S16 2
-@@ -135,14 +130,6 @@ struct bcm2835_desc {
- #define BCM2835_DMA_CHAN(n) ((n) << 8) /* Base address */
- #define BCM2835_DMA_CHANIO(base, n) ((base) + BCM2835_DMA_CHAN(n))
-
--#define MAX_NORMAL_TRANSFER SZ_1G
--/*
-- * Max length on a Lite channel is 65535 bytes.
-- * DMA handles byte-enables on SDRAM reads and writes even on 128-bit accesses,
-- * but byte-enables don't exist on peripheral addresses, so align to 32-bit.
-- */
--#define MAX_LITE_TRANSFER (SZ_64K - 4)
--
- static inline struct bcm2835_dmadev *to_bcm2835_dma_dev(struct dma_device *d)
- {
- return container_of(d, struct bcm2835_dmadev, ddev);
-@@ -239,19 +226,13 @@ static irqreturn_t bcm2835_dma_callback(
- d = c->desc;
-
- if (d) {
-- if (c->cyclic) {
-- vchan_cyclic_callback(&d->vd);
--
-- /* Keep the DMA engine running */
-- writel(BCM2835_DMA_ACTIVE,
-- c->chan_base + BCM2835_DMA_CS);
--
-- } else {
-- vchan_cookie_complete(&c->desc->vd);
-- bcm2835_dma_start_desc(c);
-- }
-+ /* TODO Only works for cyclic DMA */
-+ vchan_cyclic_callback(&d->vd);
- }
-
-+ /* Keep the DMA engine running */
-+ writel(BCM2835_DMA_ACTIVE, c->chan_base + BCM2835_DMA_CS);
-+
- spin_unlock_irqrestore(&c->vc.lock, flags);
-
- return IRQ_HANDLED;
-@@ -358,6 +339,8 @@ static void bcm2835_dma_issue_pending(st
- struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
- unsigned long flags;
-
-+ c->cyclic = true; /* Nothing else is implemented */
-+
- spin_lock_irqsave(&c->vc.lock, flags);
- if (vchan_issue_pending(&c->vc) && !c->desc)
- bcm2835_dma_start_desc(c);
-@@ -375,7 +358,7 @@ static struct dma_async_tx_descriptor *b
- struct bcm2835_desc *d;
- dma_addr_t dev_addr;
- unsigned int es, sync_type;
-- unsigned int frame, max_size;
-+ unsigned int frame;
- int i;
-
- /* Grab configuration */
-@@ -410,12 +393,7 @@ static struct dma_async_tx_descriptor *b
-
- d->c = c;
- d->dir = direction;
-- if (c->ch >= 8) /* LITE channel */
-- max_size = MAX_LITE_TRANSFER;
-- else
-- max_size = MAX_NORMAL_TRANSFER;
-- period_len = min(period_len, max_size);
-- d->frames = (buf_len - 1) / (period_len + 1);
-+ d->frames = buf_len / period_len;
-
- d->cb_list = kcalloc(d->frames, sizeof(*d->cb_list), GFP_KERNEL);
- if (!d->cb_list) {
-@@ -463,171 +441,17 @@ static struct dma_async_tx_descriptor *b
- BCM2835_DMA_PER_MAP(c->dreq);
-
- /* Length of a frame */
-- if (frame != d->frames - 1)
-- control_block->length = period_len;
-- else
-- control_block->length = buf_len - (d->frames - 1) *
-- period_len;
-+ control_block->length = period_len;
- d->size += control_block->length;
-
- /*
- * Next block is the next frame.
-- * This function is called on cyclic DMA transfers.
-+ * This DMA engine driver currently only supports cyclic DMA.
- * Therefore, wrap around at number of frames.
- */
- control_block->next = d->cb_list[((frame + 1) % d->frames)].paddr;
- }
-
-- c->cyclic = true;
--
-- return vchan_tx_prep(&c->vc, &d->vd, flags);
--}
--
--static struct dma_async_tx_descriptor *
--bcm2835_dma_prep_slave_sg(struct dma_chan *chan,
-- struct scatterlist *sgl,
-- unsigned int sg_len,
-- enum dma_transfer_direction direction,
-- unsigned long flags, void *context)
--{
-- struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
-- enum dma_slave_buswidth dev_width;
-- struct bcm2835_desc *d;
-- dma_addr_t dev_addr;
-- struct scatterlist *sgent;
-- unsigned int i, sync_type, split_cnt, max_size;
--
-- if (!is_slave_direction(direction)) {
-- dev_err(chan->device->dev, "direction not supported\n");
-- return NULL;
-- }
--
-- if (direction == DMA_DEV_TO_MEM) {
-- dev_addr = c->cfg.src_addr;
-- dev_width = c->cfg.src_addr_width;
-- sync_type = BCM2835_DMA_S_DREQ;
-- } else {
-- dev_addr = c->cfg.dst_addr;
-- dev_width = c->cfg.dst_addr_width;
-- sync_type = BCM2835_DMA_D_DREQ;
-- }
--
-- /* Bus width translates to the element size (ES) */
-- switch (dev_width) {
-- case DMA_SLAVE_BUSWIDTH_4_BYTES:
-- break;
-- default:
-- dev_err(chan->device->dev, "buswidth not supported: %i\n",
-- dev_width);
-- return NULL;
-- }
--
-- /* Allocate and setup the descriptor. */
-- d = kzalloc(sizeof(*d), GFP_NOWAIT);
-- if (!d)
-- return NULL;
--
-- d->dir = direction;
--
-- if (c->ch >= 8) /* LITE channel */
-- max_size = MAX_LITE_TRANSFER;
-- else
-- max_size = MAX_NORMAL_TRANSFER;
--
-- /*
-- * Store the length of the SG list in d->frames
-- * taking care to account for splitting up transfers
-- * too large for a LITE channel
-- */
-- d->frames = 0;
-- for_each_sg(sgl, sgent, sg_len, i) {
-- unsigned int len = sg_dma_len(sgent);
--
-- d->frames += len / max_size + 1;
-- }
--
-- /* Allocate memory for control blocks */
-- d->control_block_size = d->frames * sizeof(struct bcm2835_dma_cb);
-- d->control_block_base = dma_zalloc_coherent(chan->device->dev,
-- d->control_block_size, &d->control_block_base_phys,
-- GFP_NOWAIT);
-- if (!d->control_block_base) {
-- kfree(d);
-- return NULL;
-- }
--
-- /*
-- * Iterate over all SG entries, create a control block
-- * for each frame and link them together.
-- * Count the number of times an SG entry had to be split
-- * as a result of using a LITE channel
-- */
-- split_cnt = 0;
--
-- for_each_sg(sgl, sgent, sg_len, i) {
-- unsigned int j;
-- dma_addr_t addr = sg_dma_address(sgent);
-- unsigned int len = sg_dma_len(sgent);
--
-- for (j = 0; j < len; j += max_size) {
-- struct bcm2835_dma_cb *control_block =
-- &d->control_block_base[i + split_cnt];
--
-- /* Setup addresses */
-- if (d->dir == DMA_DEV_TO_MEM) {
-- control_block->info = BCM2835_DMA_D_INC |
-- BCM2835_DMA_D_WIDTH |
-- BCM2835_DMA_S_DREQ;
-- control_block->src = dev_addr;
-- control_block->dst = addr + (dma_addr_t)j;
-- } else {
-- control_block->info = BCM2835_DMA_S_INC |
-- BCM2835_DMA_S_WIDTH |
-- BCM2835_DMA_D_DREQ;
-- control_block->src = addr + (dma_addr_t)j;
-- control_block->dst = dev_addr;
-- }
--
-- /* Common part */
-- control_block->info |=
-- BCM2835_DMA_WAITS(BCM2835_DMA_WAIT_CYCLES);
-- control_block->info |= BCM2835_DMA_WAIT_RESP;
--
-- /* Enable */
-- if (i == sg_len - 1 && len - j <= max_size)
-- control_block->info |= BCM2835_DMA_INT_EN;
--
-- /* Setup synchronization */
-- if (sync_type)
-- control_block->info |= sync_type;
--
-- /* Setup DREQ channel */
-- if (c->dreq)
-- control_block->info |=
-- BCM2835_DMA_PER_MAP(c->dreq);
--
-- /* Length of a frame */
-- control_block->length = min(len - j, max_size);
-- d->size += control_block->length;
--
-- if (i < sg_len - 1 || len - j > max_size) {
-- /* Next block is the next frame. */
-- control_block->next =
-- d->control_block_base_phys +
-- sizeof(struct bcm2835_dma_cb) *
-- (i + split_cnt + 1);
-- } else {
-- /* Next block is empty. */
-- control_block->next = 0;
-- }
--
-- if (len - j > max_size)
-- split_cnt++;
-- }
-- }
--
-- c->cyclic = false;
--
- return vchan_tx_prep(&c->vc, &d->vd, flags);
- error_cb:
- i--;
-@@ -796,7 +620,6 @@ static int bcm2835_dma_probe(struct plat
- od->ddev.device_tx_status = bcm2835_dma_tx_status;
- od->ddev.device_issue_pending = bcm2835_dma_issue_pending;
- od->ddev.device_prep_dma_cyclic = bcm2835_dma_prep_dma_cyclic;
-- od->ddev.device_prep_slave_sg = bcm2835_dma_prep_slave_sg;
- od->ddev.device_config = bcm2835_dma_slave_config;
- od->ddev.device_terminate_all = bcm2835_dma_terminate_all;
- od->ddev.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
-@@ -886,5 +709,4 @@ module_platform_driver(bcm2835_dma_drive
- MODULE_ALIAS("platform:bcm2835-dma");
- MODULE_DESCRIPTION("BCM2835 DMA engine driver");
- MODULE_AUTHOR("Florian Meier <florian.meier@koalo.de>");
--MODULE_AUTHOR("Gellert Weisz <gellert@raspberrypi.org>");
- MODULE_LICENSE("GPL v2");
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 02:02:41 +0000