aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.4/0072-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.4/0072-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch')
-rw-r--r--target/linux/brcm2708/patches-4.4/0072-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch816
1 files changed, 816 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.4/0072-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch b/target/linux/brcm2708/patches-4.4/0072-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch
new file mode 100644
index 0000000000..34502a672b
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.4/0072-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch
@@ -0,0 +1,816 @@
+From f9201b45dcaa09fc1e85ca9fe011db801c0c12b5 Mon Sep 17 00:00:00 2001
+From: Daniel Matuschek <info@crazy-audio.com>
+Date: Mon, 4 Aug 2014 11:09:58 +0200
+Subject: [PATCH 072/127] Added driver for HiFiBerry Amp amplifier add-on board
+
+The driver contains a low-level hardware driver for the TAS5713 and the
+drivers for the Raspberry Pi I2S subsystem.
+
+TAS5713: return error if initialisation fails
+
+Existing TAS5713 driver logs errors during initialisation, but does not return
+an error code. Therefore even if initialisation fails, the driver will still be
+loaded, but won't work. This patch fixes this. I2C communication error will now
+reported correctly by a non-zero return code.
+
+HiFiBerry Amp: fix device-tree problems
+
+Some code to load the driver based on device-tree-overlays was missing. This is added by this patch.
+---
+ sound/soc/bcm/Kconfig | 7 +
+ sound/soc/bcm/Makefile | 2 +
+ sound/soc/bcm/hifiberry_amp.c | 127 +++++++++++++++
+ sound/soc/codecs/Kconfig | 4 +
+ sound/soc/codecs/Makefile | 2 +
+ sound/soc/codecs/tas5713.c | 369 ++++++++++++++++++++++++++++++++++++++++++
+ sound/soc/codecs/tas5713.h | 210 ++++++++++++++++++++++++
+ 7 files changed, 721 insertions(+)
+ create mode 100644 sound/soc/bcm/hifiberry_amp.c
+ create mode 100644 sound/soc/codecs/tas5713.c
+ create mode 100644 sound/soc/codecs/tas5713.h
+
+--- a/sound/soc/bcm/Kconfig
++++ b/sound/soc/bcm/Kconfig
+@@ -29,6 +29,13 @@ config SND_BCM2708_SOC_HIFIBERRY_DIGI
+ help
+ Say Y or M if you want to add support for HifiBerry Digi S/PDIF output board.
+
++config SND_BCM2708_SOC_HIFIBERRY_AMP
++ tristate "Support for the HifiBerry Amp"
++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
++ select SND_SOC_TAS5713
++ help
++ Say Y or M if you want to add support for the HifiBerry Amp amplifier board.
++
+ config SND_BCM2708_SOC_RPI_DAC
+ tristate "Support for RPi-DAC"
+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
+--- a/sound/soc/bcm/Makefile
++++ b/sound/soc/bcm/Makefile
+@@ -7,11 +7,13 @@ obj-$(CONFIG_SND_BCM2835_SOC_I2S) += snd
+ snd-soc-hifiberry-dac-objs := hifiberry_dac.o
+ snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o
+ snd-soc-hifiberry-digi-objs := hifiberry_digi.o
++snd-soc-hifiberry-amp-objs := hifiberry_amp.o
+ snd-soc-rpi-dac-objs := rpi-dac.o
+ snd-soc-iqaudio-dac-objs := iqaudio-dac.o
+
+ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o
+ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o
+ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o
++obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o
+ obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o
+ obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o
+--- /dev/null
++++ b/sound/soc/bcm/hifiberry_amp.c
+@@ -0,0 +1,127 @@
++/*
++ * ASoC Driver for HifiBerry AMP
++ *
++ * Author: Sebastian Eickhoff <basti.eickhoff@googlemail.com>
++ * Copyright 2014
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License for more details.
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/soc.h>
++#include <sound/jack.h>
++
++static int snd_rpi_hifiberry_amp_init(struct snd_soc_pcm_runtime *rtd)
++{
++ // ToDo: init of the dsp-registers.
++ return 0;
++}
++
++static int snd_rpi_hifiberry_amp_hw_params( struct snd_pcm_substream *substream,
++ struct snd_pcm_hw_params *params )
++{
++ struct snd_soc_pcm_runtime *rtd = substream->private_data;
++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
++
++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 64);
++}
++
++static struct snd_soc_ops snd_rpi_hifiberry_amp_ops = {
++ .hw_params = snd_rpi_hifiberry_amp_hw_params,
++};
++
++static struct snd_soc_dai_link snd_rpi_hifiberry_amp_dai[] = {
++ {
++ .name = "HifiBerry AMP",
++ .stream_name = "HifiBerry AMP HiFi",
++ .cpu_dai_name = "bcm2708-i2s.0",
++ .codec_dai_name = "tas5713-hifi",
++ .platform_name = "bcm2708-i2s.0",
++ .codec_name = "tas5713.1-001b",
++ .dai_fmt = SND_SOC_DAIFMT_I2S |
++ SND_SOC_DAIFMT_NB_NF |
++ SND_SOC_DAIFMT_CBS_CFS,
++ .ops = &snd_rpi_hifiberry_amp_ops,
++ .init = snd_rpi_hifiberry_amp_init,
++ },
++};
++
++
++static struct snd_soc_card snd_rpi_hifiberry_amp = {
++ .name = "snd_rpi_hifiberry_amp",
++ .dai_link = snd_rpi_hifiberry_amp_dai,
++ .num_links = ARRAY_SIZE(snd_rpi_hifiberry_amp_dai),
++};
++
++static const struct of_device_id snd_rpi_hifiberry_amp_of_match[] = {
++ { .compatible = "hifiberry,hifiberry-amp", },
++ {},
++};
++MODULE_DEVICE_TABLE(of, snd_rpi_hifiberry_amp_of_match);
++
++
++static int snd_rpi_hifiberry_amp_probe(struct platform_device *pdev)
++{
++ int ret = 0;
++
++ snd_rpi_hifiberry_amp.dev = &pdev->dev;
++
++ if (pdev->dev.of_node) {
++ struct device_node *i2s_node;
++ struct snd_soc_dai_link *dai = &snd_rpi_hifiberry_amp_dai[0];
++ i2s_node = of_parse_phandle(pdev->dev.of_node,
++ "i2s-controller", 0);
++
++ if (i2s_node) {
++ dai->cpu_dai_name = NULL;
++ dai->cpu_of_node = i2s_node;
++ dai->platform_name = NULL;
++ dai->platform_of_node = i2s_node;
++ }
++ }
++
++ ret = snd_soc_register_card(&snd_rpi_hifiberry_amp);
++
++ if (ret != 0) {
++ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret);
++ }
++
++ return ret;
++}
++
++
++static int snd_rpi_hifiberry_amp_remove(struct platform_device *pdev)
++{
++ return snd_soc_unregister_card(&snd_rpi_hifiberry_amp);
++}
++
++
++static struct platform_driver snd_rpi_hifiberry_amp_driver = {
++ .driver = {
++ .name = "snd-hifiberry-amp",
++ .owner = THIS_MODULE,
++ .of_match_table = snd_rpi_hifiberry_amp_of_match,
++ },
++ .probe = snd_rpi_hifiberry_amp_probe,
++ .remove = snd_rpi_hifiberry_amp_remove,
++};
++
++
++module_platform_driver(snd_rpi_hifiberry_amp_driver);
++
++
++MODULE_AUTHOR("Sebastian Eickhoff <basti.eickhoff@googlemail.com>");
++MODULE_DESCRIPTION("ASoC driver for HiFiBerry-AMP");
++MODULE_LICENSE("GPL v2");
+--- a/sound/soc/codecs/Kconfig
++++ b/sound/soc/codecs/Kconfig
+@@ -117,6 +117,7 @@ config SND_SOC_ALL_CODECS
+ select SND_SOC_TFA9879 if I2C
+ select SND_SOC_TLV320AIC23_I2C if I2C
+ select SND_SOC_TLV320AIC23_SPI if SPI_MASTER
++ select SND_SOC_TAS5713 if I2C
+ select SND_SOC_TLV320AIC26 if SPI_MASTER
+ select SND_SOC_TLV320AIC31XX if I2C
+ select SND_SOC_TLV320AIC32X4 if I2C
+@@ -674,6 +675,9 @@ config SND_SOC_TFA9879
+ tristate "NXP Semiconductors TFA9879 amplifier"
+ depends on I2C
+
++config SND_SOC_TAS5713
++ tristate
++
+ config SND_SOC_TLV320AIC23
+ tristate
+
+--- a/sound/soc/codecs/Makefile
++++ b/sound/soc/codecs/Makefile
+@@ -118,6 +118,7 @@ snd-soc-sti-sas-objs := sti-sas.o
+ snd-soc-tas5086-objs := tas5086.o
+ snd-soc-tas571x-objs := tas571x.o
+ snd-soc-tfa9879-objs := tfa9879.o
++snd-soc-tas5713-objs := tas5713.o
+ snd-soc-tlv320aic23-objs := tlv320aic23.o
+ snd-soc-tlv320aic23-i2c-objs := tlv320aic23-i2c.o
+ snd-soc-tlv320aic23-spi-objs := tlv320aic23-spi.o
+@@ -312,6 +313,7 @@ obj-$(CONFIG_SND_SOC_TAS2552) += snd-soc
+ obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o
+ obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o
+ obj-$(CONFIG_SND_SOC_TFA9879) += snd-soc-tfa9879.o
++obj-$(CONFIG_SND_SOC_TAS5713) += snd-soc-tas5713.o
+ obj-$(CONFIG_SND_SOC_TLV320AIC23) += snd-soc-tlv320aic23.o
+ obj-$(CONFIG_SND_SOC_TLV320AIC23_I2C) += snd-soc-tlv320aic23-i2c.o
+ obj-$(CONFIG_SND_SOC_TLV320AIC23_SPI) += snd-soc-tlv320aic23-spi.o
+--- /dev/null
++++ b/sound/soc/codecs/tas5713.c
+@@ -0,0 +1,369 @@
++/*
++ * ASoC Driver for TAS5713
++ *
++ * Author: Sebastian Eickhoff <basti.eickhoff@googlemail.com>
++ * Copyright 2014
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License for more details.
++ */
++
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/pm.h>
++#include <linux/i2c.h>
++#include <linux/of_device.h>
++#include <linux/spi/spi.h>
++#include <linux/regmap.h>
++#include <linux/regulator/consumer.h>
++#include <linux/slab.h>
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/soc.h>
++#include <sound/initval.h>
++#include <sound/tlv.h>
++
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/fs.h>
++#include <asm/uaccess.h>
++
++#include "tas5713.h"
++
++
++static struct i2c_client *i2c;
++
++struct tas5713_priv {
++ struct regmap *regmap;
++ int mclk_div;
++ struct snd_soc_codec *codec;
++};
++
++static struct tas5713_priv *priv_data;
++
++
++
++
++/*
++ * _ _ ___ _ ___ _ _
++ * /_\ | | / __| /_\ / __|___ _ _| |_ _ _ ___| |___
++ * / _ \| |__\__ \/ _ \ | (__/ _ \ ' \ _| '_/ _ \ (_-<
++ * /_/ \_\____|___/_/ \_\ \___\___/_||_\__|_| \___/_/__/
++ *
++ */
++
++static const DECLARE_TLV_DB_SCALE(tas5713_vol_tlv, -10000, 50, 1);
++
++
++static const struct snd_kcontrol_new tas5713_snd_controls[] = {
++ SOC_SINGLE_TLV ("Master" , TAS5713_VOL_MASTER, 0, 248, 1, tas5713_vol_tlv),
++ SOC_DOUBLE_R_TLV("Channels" , TAS5713_VOL_CH1, TAS5713_VOL_CH2, 0, 248, 1, tas5713_vol_tlv)
++};
++
++
++
++
++/*
++ * __ __ _ _ ___ _
++ * | \/ |__ _ __| |_ (_)_ _ ___ | \ _ _(_)_ _____ _ _
++ * | |\/| / _` / _| ' \| | ' \/ -_) | |) | '_| \ V / -_) '_|
++ * |_| |_\__,_\__|_||_|_|_||_\___| |___/|_| |_|\_/\___|_|
++ *
++ */
++
++static int tas5713_hw_params(struct snd_pcm_substream *substream,
++ struct snd_pcm_hw_params *params,
++ struct snd_soc_dai *dai)
++{
++ u16 blen = 0x00;
++
++ struct snd_soc_codec *codec;
++ codec = dai->codec;
++ priv_data->codec = dai->codec;
++
++ switch (params_format(params)) {
++ case SNDRV_PCM_FORMAT_S16_LE:
++ blen = 0x03;
++ break;
++ case SNDRV_PCM_FORMAT_S20_3LE:
++ blen = 0x1;
++ break;
++ case SNDRV_PCM_FORMAT_S24_LE:
++ blen = 0x04;
++ break;
++ case SNDRV_PCM_FORMAT_S32_LE:
++ blen = 0x05;
++ break;
++ default:
++ dev_err(dai->dev, "Unsupported word length: %u\n",
++ params_format(params));
++ return -EINVAL;
++ }
++
++ // set word length
++ snd_soc_update_bits(codec, TAS5713_SERIAL_DATA_INTERFACE, 0x7, blen);
++
++ return 0;
++}
++
++
++static int tas5713_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
++{
++ unsigned int val = 0;
++
++ struct tas5713_priv *tas5713;
++ struct snd_soc_codec *codec = dai->codec;
++ tas5713 = snd_soc_codec_get_drvdata(codec);
++
++ if (mute) {
++ val = TAS5713_SOFT_MUTE_ALL;
++ }
++
++ return regmap_write(tas5713->regmap, TAS5713_SOFT_MUTE, val);
++}
++
++
++static const struct snd_soc_dai_ops tas5713_dai_ops = {
++ .hw_params = tas5713_hw_params,
++ .mute_stream = tas5713_mute_stream,
++};
++
++
++static struct snd_soc_dai_driver tas5713_dai = {
++ .name = "tas5713-hifi",
++ .playback = {
++ .stream_name = "Playback",
++ .channels_min = 2,
++ .channels_max = 2,
++ .rates = SNDRV_PCM_RATE_8000_48000,
++ .formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE ),
++ },
++ .ops = &tas5713_dai_ops,
++};
++
++
++
++
++/*
++ * ___ _ ___ _
++ * / __|___ __| |___ __ | \ _ _(_)_ _____ _ _
++ * | (__/ _ \/ _` / -_) _| | |) | '_| \ V / -_) '_|
++ * \___\___/\__,_\___\__| |___/|_| |_|\_/\___|_|
++ *
++ */
++
++static int tas5713_remove(struct snd_soc_codec *codec)
++{
++ struct tas5713_priv *tas5713;
++
++ tas5713 = snd_soc_codec_get_drvdata(codec);
++
++ return 0;
++}
++
++
++static int tas5713_probe(struct snd_soc_codec *codec)
++{
++ struct tas5713_priv *tas5713;
++ int i, ret;
++
++ i2c = container_of(codec->dev, struct i2c_client, dev);
++
++ tas5713 = snd_soc_codec_get_drvdata(codec);
++
++ // Reset error
++ ret = snd_soc_write(codec, TAS5713_ERROR_STATUS, 0x00);
++ if (ret < 0) return ret;
++
++ // Trim oscillator
++ ret = snd_soc_write(codec, TAS5713_OSC_TRIM, 0x00);
++ if (ret < 0) return ret;
++ msleep(1000);
++
++ // Reset error
++ ret = snd_soc_write(codec, TAS5713_ERROR_STATUS, 0x00);
++ if (ret < 0) return ret;
++
++ // Clock mode: 44/48kHz, MCLK=64xfs
++ ret = snd_soc_write(codec, TAS5713_CLOCK_CTRL, 0x60);
++ if (ret < 0) return ret;
++
++ // I2S 24bit
++ ret = snd_soc_write(codec, TAS5713_SERIAL_DATA_INTERFACE, 0x05);
++ if (ret < 0) return ret;
++
++ // Unmute
++ ret = snd_soc_write(codec, TAS5713_SYSTEM_CTRL2, 0x00);
++ if (ret < 0) return ret;
++ ret = snd_soc_write(codec, TAS5713_SOFT_MUTE, 0x00);
++ if (ret < 0) return ret;
++
++ // Set volume to 0db
++ ret = snd_soc_write(codec, TAS5713_VOL_MASTER, 0x00);
++ if (ret < 0) return ret;
++
++ // Now start programming the default initialization sequence
++ for (i = 0; i < ARRAY_SIZE(tas5713_init_sequence); ++i) {
++ ret = i2c_master_send(i2c,
++ tas5713_init_sequence[i].data,
++ tas5713_init_sequence[i].size);
++ if (ret < 0) {
++ printk(KERN_INFO "TAS5713 CODEC PROBE: InitSeq returns: %d\n", ret);
++ }
++ }
++
++ // Unmute
++ ret = snd_soc_write(codec, TAS5713_SYSTEM_CTRL2, 0x00);
++ if (ret < 0) return ret;
++
++ return 0;
++}
++
++
++static struct snd_soc_codec_driver soc_codec_dev_tas5713 = {
++ .probe = tas5713_probe,
++ .remove = tas5713_remove,
++ .controls = tas5713_snd_controls,
++ .num_controls = ARRAY_SIZE(tas5713_snd_controls),
++};
++
++
++
++
++/*
++ * ___ ___ ___ ___ _
++ * |_ _|_ ) __| | \ _ _(_)_ _____ _ _
++ * | | / / (__ | |) | '_| \ V / -_) '_|
++ * |___/___\___| |___/|_| |_|\_/\___|_|
++ *
++ */
++
++static const struct reg_default tas5713_reg_defaults[] = {
++ { 0x07 ,0x80 }, // R7 - VOL_MASTER - -40dB
++ { 0x08 , 30 }, // R8 - VOL_CH1 - 0dB
++ { 0x09 , 30 }, // R9 - VOL_CH2 - 0dB
++ { 0x0A ,0x80 }, // R10 - VOL_HEADPHONE - -40dB
++};
++
++
++static bool tas5713_reg_volatile(struct device *dev, unsigned int reg)
++{
++ switch (reg) {
++ case TAS5713_DEVICE_ID:
++ case TAS5713_ERROR_STATUS:
++ return true;
++ default:
++ return false;
++ }
++}
++
++
++static const struct of_device_id tas5713_of_match[] = {
++ { .compatible = "ti,tas5713", },
++ { }
++};
++MODULE_DEVICE_TABLE(of, tas5713_of_match);
++
++
++static struct regmap_config tas5713_regmap_config = {
++ .reg_bits = 8,
++ .val_bits = 8,
++
++ .max_register = TAS5713_MAX_REGISTER,
++ .volatile_reg = tas5713_reg_volatile,
++
++ .cache_type = REGCACHE_RBTREE,
++ .reg_defaults = tas5713_reg_defaults,
++ .num_reg_defaults = ARRAY_SIZE(tas5713_reg_defaults),
++};
++
++
++static int tas5713_i2c_probe(struct i2c_client *i2c,
++ const struct i2c_device_id *id)
++{
++ int ret;
++
++ priv_data = devm_kzalloc(&i2c->dev, sizeof *priv_data, GFP_KERNEL);
++ if (!priv_data)
++ return -ENOMEM;
++
++ priv_data->regmap = devm_regmap_init_i2c(i2c, &tas5713_regmap_config);
++ if (IS_ERR(priv_data->regmap)) {
++ ret = PTR_ERR(priv_data->regmap);
++ return ret;
++ }
++
++ i2c_set_clientdata(i2c, priv_data);
++
++ ret = snd_soc_register_codec(&i2c->dev,
++ &soc_codec_dev_tas5713, &tas5713_dai, 1);
++
++ return ret;
++}
++
++
++static int tas5713_i2c_remove(struct i2c_client *i2c)
++{
++ snd_soc_unregister_codec(&i2c->dev);
++ i2c_set_clientdata(i2c, NULL);
++
++ kfree(priv_data);
++
++ return 0;
++}
++
++
++static const struct i2c_device_id tas5713_i2c_id[] = {
++ { "tas5713", 0 },
++ { }
++};
++
++MODULE_DEVICE_TABLE(i2c, tas5713_i2c_id);
++
++
++static struct i2c_driver tas5713_i2c_driver = {
++ .driver = {
++ .name = "tas5713",
++ .owner = THIS_MODULE,
++ .of_match_table = tas5713_of_match,
++ },
++ .probe = tas5713_i2c_probe,
++ .remove = tas5713_i2c_remove,
++ .id_table = tas5713_i2c_id
++};
++
++
++static int __init tas5713_modinit(void)
++{
++ int ret = 0;
++
++ ret = i2c_add_driver(&tas5713_i2c_driver);
++ if (ret) {
++ printk(KERN_ERR "Failed to register tas5713 I2C driver: %d\n",
++ ret);
++ }
++
++ return ret;
++}
++module_init(tas5713_modinit);
++
++
++static void __exit tas5713_exit(void)
++{
++ i2c_del_driver(&tas5713_i2c_driver);
++}
++module_exit(tas5713_exit);
++
++
++MODULE_AUTHOR("Sebastian Eickhoff <basti.eickhoff@googlemail.com>");
++MODULE_DESCRIPTION("ASoC driver for TAS5713");
++MODULE_LICENSE("GPL v2");
+--- /dev/null
++++ b/sound/soc/codecs/tas5713.h
+@@ -0,0 +1,210 @@
++/*
++ * ASoC Driver for TAS5713
++ *
++ * Author: Sebastian Eickhoff <basti.eickhoff@googlemail.com>
++ * Copyright 2014
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License for more details.
++ */
++
++#ifndef _TAS5713_H
++#define _TAS5713_H
++
++
++// TAS5713 I2C-bus register addresses
++
++#define TAS5713_CLOCK_CTRL 0x00
++#define TAS5713_DEVICE_ID 0x01
++#define TAS5713_ERROR_STATUS 0x02
++#define TAS5713_SYSTEM_CTRL1 0x03
++#define TAS5713_SERIAL_DATA_INTERFACE 0x04
++#define TAS5713_SYSTEM_CTRL2 0x05
++#define TAS5713_SOFT_MUTE 0x06
++#define TAS5713_VOL_MASTER 0x07
++#define TAS5713_VOL_CH1 0x08
++#define TAS5713_VOL_CH2 0x09
++#define TAS5713_VOL_HEADPHONE 0x0A
++#define TAS5713_VOL_CONFIG 0x0E
++#define TAS5713_MODULATION_LIMIT 0x10
++#define TAS5713_IC_DLY_CH1 0x11
++#define TAS5713_IC_DLY_CH2 0x12
++#define TAS5713_IC_DLY_CH3 0x13
++#define TAS5713_IC_DLY_CH4 0x14
++
++#define TAS5713_START_STOP_PERIOD 0x1A
++#define TAS5713_OSC_TRIM 0x1B
++#define TAS5713_BKND_ERR 0x1C
++
++#define TAS5713_INPUT_MUX 0x20
++#define TAS5713_SRC_SELECT_CH4 0x21
++#define TAS5713_PWM_MUX 0x25
++
++#define TAS5713_CH1_BQ0 0x29
++#define TAS5713_CH1_BQ1 0x2A
++#define TAS5713_CH1_BQ2 0x2B
++#define TAS5713_CH1_BQ3 0x2C
++#define TAS5713_CH1_BQ4 0x2D
++#define TAS5713_CH1_BQ5 0x2E
++#define TAS5713_CH1_BQ6 0x2F
++#define TAS5713_CH1_BQ7 0x58
++#define TAS5713_CH1_BQ8 0x59
++
++#define TAS5713_CH2_BQ0 0x30
++#define TAS5713_CH2_BQ1 0x31
++#define TAS5713_CH2_BQ2 0x32
++#define TAS5713_CH2_BQ3 0x33
++#define TAS5713_CH2_BQ4 0x34
++#define TAS5713_CH2_BQ5 0x35
++#define TAS5713_CH2_BQ6 0x36
++#define TAS5713_CH2_BQ7 0x5C
++#define TAS5713_CH2_BQ8 0x5D
++
++#define TAS5713_CH4_BQ0 0x5A
++#define TAS5713_CH4_BQ1 0x5B
++#define TAS5713_CH3_BQ0 0x5E
++#define TAS5713_CH3_BQ1 0x5F
++
++#define TAS5713_DRC1_SOFTENING_FILTER_ALPHA_OMEGA 0x3B
++#define TAS5713_DRC1_ATTACK_RELEASE_RATE 0x3C
++#define TAS5713_DRC2_SOFTENING_FILTER_ALPHA_OMEGA 0x3E
++#define TAS5713_DRC2_ATTACK_RELEASE_RATE 0x3F
++#define TAS5713_DRC1_ATTACK_RELEASE_THRES 0x40
++#define TAS5713_DRC2_ATTACK_RELEASE_THRES 0x43
++#define TAS5713_DRC_CTRL 0x46
++
++#define TAS5713_BANK_SW_CTRL 0x50
++#define TAS5713_CH1_OUTPUT_MIXER 0x51
++#define TAS5713_CH2_OUTPUT_MIXER 0x52
++#define TAS5713_CH1_INPUT_MIXER 0x53
++#define TAS5713_CH2_INPUT_MIXER 0x54
++#define TAS5713_OUTPUT_POST_SCALE 0x56
++#define TAS5713_OUTPUT_PRESCALE 0x57
++
++#define TAS5713_IDF_POST_SCALE 0x62
++
++#define TAS5713_CH1_INLINE_MIXER 0x70
++#define TAS5713_CH1_INLINE_DRC_EN_MIXER 0x71
++#define TAS5713_CH1_R_CHANNEL_MIXER 0x72
++#define TAS5713_CH1_L_CHANNEL_MIXER 0x73
++#define TAS5713_CH2_INLINE_MIXER 0x74
++#define TAS5713_CH2_INLINE_DRC_EN_MIXER 0x75
++#define TAS5713_CH2_L_CHANNEL_MIXER 0x76
++#define TAS5713_CH2_R_CHANNEL_MIXER 0x77
++
++#define TAS5713_UPDATE_DEV_ADDR_KEY 0xF8
++#define TAS5713_UPDATE_DEV_ADDR_REG 0xF9
++
++#define TAS5713_REGISTER_COUNT 0x46
++#define TAS5713_MAX_REGISTER 0xF9
++
++
++// Bitmasks for registers
++#define TAS5713_SOFT_MUTE_ALL 0x07
++
++
++
++struct tas5713_init_command {
++ const int size;
++ const char *const data;
++};
++
++static const struct tas5713_init_command tas5713_init_sequence[] = {
++
++ // Trim oscillator
++ { .size = 2, .data = "\x1B\x00" },
++ // System control register 1 (0x03): block DC
++ { .size = 2, .data = "\x03\x80" },
++ // Mute everything
++ { .size = 2, .data = "\x05\x40" },
++ // Modulation limit register (0x10): 97.7%
++ { .size = 2, .data = "\x10\x02" },
++ // Interchannel delay registers
++ // (0x11, 0x12, 0x13, and 0x14): BD mode
++ { .size = 2, .data = "\x11\xB8" },
++ { .size = 2, .data = "\x12\x60" },
++ { .size = 2, .data = "\x13\xA0" },
++ { .size = 2, .data = "\x14\x48" },
++ // PWM shutdown group register (0x19): no shutdown
++ { .size = 2, .data = "\x19\x00" },
++ // Input multiplexer register (0x20): BD mode
++ { .size = 2, .data = "\x20\x00\x89\x77\x72" },
++ // PWM output mux register (0x25)
++ // Channel 1 --> OUTA, channel 1 neg --> OUTB
++ // Channel 2 --> OUTC, channel 2 neg --> OUTD
++ { .size = 5, .data = "\x25\x01\x02\x13\x45" },
++ // DRC control (0x46): DRC off
++ { .size = 5, .data = "\x46\x00\x00\x00\x00" },
++ // BKND_ERR register (0x1C): 299ms reset period
++ { .size = 2, .data = "\x1C\x07" },
++ // Mute channel 3
++ { .size = 2, .data = "\x0A\xFF" },
++ // Volume configuration register (0x0E): volume slew 512 steps
++ { .size = 2, .data = "\x0E\x90" },
++ // Clock control register (0x00): 44/48kHz, MCLK=64xfs
++ { .size = 2, .data = "\x00\x60" },
++ // Bank switch and eq control (0x50): no bank switching
++ { .size = 5, .data = "\x50\x00\x00\x00\x00" },
++ // Volume registers (0x07, 0x08, 0x09, 0x0A)
++ { .size = 2, .data = "\x07\x20" },
++ { .size = 2, .data = "\x08\x30" },
++ { .size = 2, .data = "\x09\x30" },
++ { .size = 2, .data = "\x0A\xFF" },
++ // 0x72, 0x73, 0x76, 0x77 input mixer:
++ // no intermix between channels
++ { .size = 5, .data = "\x72\x00\x00\x00\x00" },
++ { .size = 5, .data = "\x73\x00\x80\x00\x00" },
++ { .size = 5, .data = "\x76\x00\x00\x00\x00" },
++ { .size = 5, .data = "\x77\x00\x80\x00\x00" },
++ // 0x70, 0x71, 0x74, 0x75 inline DRC mixer:
++ // no inline DRC inmix
++ { .size = 5, .data = "\x70\x00\x80\x00\x00" },
++ { .size = 5, .data = "\x71\x00\x00\x00\x00" },
++ { .size = 5, .data = "\x74\x00\x80\x00\x00" },
++ { .size = 5, .data = "\x75\x00\x00\x00\x00" },
++ // 0x56, 0x57 Output scale
++ { .size = 5, .data = "\x56\x00\x80\x00\x00" },
++ { .size = 5, .data = "\x57\x00\x02\x00\x00" },
++ // 0x3B, 0x3c
++ { .size = 9, .data = "\x3B\x00\x08\x00\x00\x00\x78\x00\x00" },
++ { .size = 9, .data = "\x3C\x00\x00\x01\x00\xFF\xFF\xFF\x00" },
++ { .size = 9, .data = "\x3E\x00\x08\x00\x00\x00\x78\x00\x00" },
++ { .size = 9, .data = "\x3F\x00\x00\x01\x00\xFF\xFF\xFF\x00" },
++ { .size = 9, .data = "\x40\x00\x00\x01\x00\xFF\xFF\xFF\x00" },
++ { .size = 9, .data = "\x43\x00\x00\x01\x00\xFF\xFF\xFF\x00" },
++ // 0x51, 0x52: output mixer
++ { .size = 9, .data = "\x51\x00\x80\x00\x00\x00\x00\x00\x00" },
++ { .size = 9, .data = "\x52\x00\x80\x00\x00\x00\x00\x00\x00" },
++ // PEQ defaults
++ { .size = 21, .data = "\x29\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
++ { .size = 21, .data = "\x2A\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
++ { .size = 21, .data = "\x2B\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
++ { .size = 21, .data = "\x2C\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
++ { .size = 21, .data = "\x2D\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
++ { .size = 21, .data = "\x2E\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
++ { .size = 21, .data = "\x2F\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
++ { .size = 21, .data = "\x30\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
++ { .size = 21, .data = "\x31\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
++ { .size = 21, .data = "\x32\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
++ { .size = 21, .data = "\x33\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
++ { .size = 21, .data = "\x34\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
++ { .size = 21, .data = "\x35\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
++ { .size = 21, .data = "\x36\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
++ { .size = 21, .data = "\x58\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
++ { .size = 21, .data = "\x59\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
++ { .size = 21, .data = "\x5C\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
++ { .size = 21, .data = "\x5D\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
++ { .size = 21, .data = "\x5E\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
++ { .size = 21, .data = "\x5F\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
++ { .size = 21, .data = "\x5A\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
++ { .size = 21, .data = "\x5B\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
++};
++
++
++#endif /* _TAS5713_H */