aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.19/950-0739-dtoverlays-Add-an-overlay-for-the-Infineon-IRS1125.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.19/950-0739-dtoverlays-Add-an-overlay-for-the-Infineon-IRS1125.patch')
-rw-r--r--target/linux/brcm2708/patches-4.19/950-0739-dtoverlays-Add-an-overlay-for-the-Infineon-IRS1125.patch149
1 files changed, 0 insertions, 149 deletions
diff --git a/target/linux/brcm2708/patches-4.19/950-0739-dtoverlays-Add-an-overlay-for-the-Infineon-IRS1125.patch b/target/linux/brcm2708/patches-4.19/950-0739-dtoverlays-Add-an-overlay-for-the-Infineon-IRS1125.patch
deleted file mode 100644
index 1202d10d31..0000000000
--- a/target/linux/brcm2708/patches-4.19/950-0739-dtoverlays-Add-an-overlay-for-the-Infineon-IRS1125.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From 89af5d7df7f548744bd675d96295c0f45e24b31f Mon Sep 17 00:00:00 2001
-From: Markus Proeller <markus.proeller@pieye.org>
-Date: Thu, 10 Oct 2019 19:13:02 +0200
-Subject: [PATCH] dtoverlays: Add an overlay for the Infineon IRS1125
-
-The Infineon IRS1125 is a CSI2 time of flight depth sensor
-which has a suitable V4L2 subdevice driver.
-
-Add an overlay for configuring it.
-
-Signed-off-by: Markus Proeller <markus.proeller@pieye.org>
----
- arch/arm/boot/dts/overlays/Makefile | 1 +
- arch/arm/boot/dts/overlays/README | 12 +++
- .../arm/boot/dts/overlays/irs1125-overlay.dts | 97 +++++++++++++++++++
- 3 files changed, 110 insertions(+)
- create mode 100644 arch/arm/boot/dts/overlays/irs1125-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -83,6 +83,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
- iqaudio-dac.dtbo \
- iqaudio-dacplus.dtbo \
- iqaudio-digi-wm8804-audio.dtbo \
-+ irs1125.dtbo \
- jedec-spi-nor.dtbo \
- justboom-dac.dtbo \
- justboom-digi.dtbo \
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -1347,6 +1347,18 @@ Params: card_name Override
- dai stream name.
-
-
-+Name: irs1125
-+Info: Infineon irs1125 TOF camera module.
-+ Uses Unicam 1, which is the standard camera connector on most Pi
-+ variants.
-+Load: dtoverlay=irs1125,<param>=<val>
-+Params: i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45.
-+ Useful on Compute Modules.
-+
-+ i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45.
-+ This is required for Pi B+, 2, 0, and 0W.
-+
-+
- Name: jedec-spi-nor
- Info: Adds support for JEDEC-compliant SPI NOR flash devices. (Note: The
- "jedec,spi-nor" kernel driver was formerly known as "m25p80".)
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/irs1125-overlay.dts
-@@ -0,0 +1,97 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+// Definitions for IRS1125 camera module on VC I2C bus
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+ compatible = "brcm,bcm2835";
-+
-+ fragment@0 {
-+ target = <&i2c_vc>;
-+ __overlay__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "okay";
-+
-+ irs1125: irs1125@3D {
-+ compatible = "infineon,irs1125";
-+ reg = <0x3D>;
-+ status = "okay";
-+
-+ pwdn-gpios = <&gpio 5 0>;
-+ clocks = <&irs1125_clk>;
-+
-+ irs1125_clk: camera-clk {
-+ compatible = "fixed-clock";
-+ #clock-cells = <0>;
-+ clock-frequency = <26000000>;
-+ };
-+
-+ port {
-+ irs1125_0: endpoint {
-+ remote-endpoint = <&csi1_ep>;
-+ clock-lanes = <0>;
-+ data-lanes = <1 2>;
-+ clock-noncontinuous;
-+ link-frequencies =
-+ /bits/ 64 <297000000>;
-+ };
-+ };
-+ };
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&csi1>;
-+ __overlay__ {
-+ status = "okay";
-+
-+ port {
-+ csi1_ep: endpoint {
-+ remote-endpoint = <&irs1125_0>;
-+ };
-+ };
-+ };
-+ };
-+
-+ fragment@2 {
-+ target = <&i2c0_pins>;
-+ __dormant__ {
-+ brcm,pins = <28 29>;
-+ brcm,function = <4>; /* alt0 */
-+ };
-+ };
-+ fragment@3 {
-+ target = <&i2c0_pins>;
-+ __overlay__ {
-+ brcm,pins = <44 45>;
-+ brcm,function = <5>; /* alt1 */
-+ };
-+ };
-+ fragment@4 {
-+ target = <&i2c0_pins>;
-+ __dormant__ {
-+ brcm,pins = <0 1>;
-+ brcm,function = <4>; /* alt0 */
-+ };
-+ };
-+ fragment@5 {
-+ target = <&i2c_vc>;
-+ __overlay__ {
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@6 {
-+ target-path="/__overrides__";
-+ __overlay__ {
-+ cam0-pwdn-ctrl = <&irs1125>,"pwdn-gpios:0";
-+ cam0-pwdn = <&irs1125>,"pwdn-gpios:4";
-+ };
-+ };
-+
-+ __overrides__ {
-+ i2c_pins_0_1 = <0>,"-2-3+4";
-+ i2c_pins_28_29 = <0>,"+2-3-4";
-+ };
-+};