diff options
Diffstat (limited to 'target/linux/brcm2708/patches-4.19/950-0720-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch')
-rw-r--r-- | target/linux/brcm2708/patches-4.19/950-0720-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch | 183 |
1 files changed, 0 insertions, 183 deletions
diff --git a/target/linux/brcm2708/patches-4.19/950-0720-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch b/target/linux/brcm2708/patches-4.19/950-0720-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch deleted file mode 100644 index e06247753d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0720-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch +++ /dev/null @@ -1,183 +0,0 @@ -From 268bd5b5557ccb0ac4eae998ad7c6261c240b89b Mon Sep 17 00:00:00 2001 -From: Stefan Wahren <wahrenst@gmx.net> -Date: Sun, 21 Jul 2019 16:01:36 +0200 -Subject: [PATCH] pinctrl: bcm2835: Add support for BCM2711 pull-up - functionality - -commit e38a9a437fb93ddafab5030165e4c6a3a5021669 upstream. - -The BCM2711 has a new way of selecting the pull-up/pull-down setting -for a GPIO pin. The registers used for the BCM2835, GP_PUD and -GP_PUDCLKn0, are no longer connected. A new set of registers, -GP_GPIO_PUP_PDN_CNTRL_REGx must be used. This commit will add -a new compatible string "brcm,bcm2711-gpio" and the kernel -driver will use it to select which method is used to select -pull-up/pull-down. - -This patch based on a patch by Al Cooper which was intended for the -BCM7211. This is a bugfixed and improved version. - -Signed-off-by: Stefan Wahren <wahrenst@gmx.net> -Acked-by: Eric Anholt <eric@anholt.net> ---- - drivers/pinctrl/bcm/pinctrl-bcm2835.c | 105 ++++++++++++++++++++++++-- - 1 file changed, 100 insertions(+), 5 deletions(-) - ---- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c -+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c -@@ -57,15 +57,24 @@ - #define GPAFEN0 0x88 /* Pin Async Falling Edge Detect */ - #define GPPUD 0x94 /* Pin Pull-up/down Enable */ - #define GPPUDCLK0 0x98 /* Pin Pull-up/down Enable Clock */ -+#define GP_GPIO_PUP_PDN_CNTRL_REG0 0xe4 /* 2711 Pin Pull-up/down select */ - - #define FSEL_REG(p) (GPFSEL0 + (((p) / 10) * 4)) - #define FSEL_SHIFT(p) (((p) % 10) * 3) - #define GPIO_REG_OFFSET(p) ((p) / 32) - #define GPIO_REG_SHIFT(p) ((p) % 32) - -+#define PUD_2711_MASK 0x3 -+#define PUD_2711_REG_OFFSET(p) ((p) / 16) -+#define PUD_2711_REG_SHIFT(p) (((p) % 16) * 2) -+ - /* argument: bcm2835_pinconf_pull */ - #define BCM2835_PINCONF_PARAM_PULL (PIN_CONFIG_END + 1) - -+#define BCM2711_PULL_NONE 0x0 -+#define BCM2711_PULL_UP 0x1 -+#define BCM2711_PULL_DOWN 0x2 -+ - struct bcm2835_pinctrl { - struct device *dev; - void __iomem *base; -@@ -975,6 +984,77 @@ static const struct pinconf_ops bcm2835_ - .pin_config_set = bcm2835_pinconf_set, - }; - -+static void bcm2711_pull_config_set(struct bcm2835_pinctrl *pc, -+ unsigned int pin, unsigned int arg) -+{ -+ u32 shifter; -+ u32 value; -+ u32 off; -+ -+ off = PUD_2711_REG_OFFSET(pin); -+ shifter = PUD_2711_REG_SHIFT(pin); -+ -+ value = bcm2835_gpio_rd(pc, GP_GPIO_PUP_PDN_CNTRL_REG0 + (off * 4)); -+ value &= ~(PUD_2711_MASK << shifter); -+ value |= (arg << shifter); -+ bcm2835_gpio_wr(pc, GP_GPIO_PUP_PDN_CNTRL_REG0 + (off * 4), value); -+} -+ -+static int bcm2711_pinconf_set(struct pinctrl_dev *pctldev, -+ unsigned int pin, unsigned long *configs, -+ unsigned int num_configs) -+{ -+ struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); -+ u32 param, arg; -+ int i; -+ -+ for (i = 0; i < num_configs; i++) { -+ param = pinconf_to_config_param(configs[i]); -+ arg = pinconf_to_config_argument(configs[i]); -+ -+ switch (param) { -+ /* convert legacy brcm,pull */ -+ case BCM2835_PINCONF_PARAM_PULL: -+ if (arg == BCM2835_PUD_UP) -+ arg = BCM2711_PULL_UP; -+ else if (arg == BCM2835_PUD_DOWN) -+ arg = BCM2711_PULL_DOWN; -+ else -+ arg = BCM2711_PULL_NONE; -+ -+ bcm2711_pull_config_set(pc, pin, arg); -+ break; -+ -+ /* Set pull generic bindings */ -+ case PIN_CONFIG_BIAS_DISABLE: -+ bcm2711_pull_config_set(pc, pin, BCM2711_PULL_NONE); -+ break; -+ case PIN_CONFIG_BIAS_PULL_DOWN: -+ bcm2711_pull_config_set(pc, pin, BCM2711_PULL_DOWN); -+ break; -+ case PIN_CONFIG_BIAS_PULL_UP: -+ bcm2711_pull_config_set(pc, pin, BCM2711_PULL_UP); -+ break; -+ -+ /* Set output-high or output-low */ -+ case PIN_CONFIG_OUTPUT: -+ bcm2835_gpio_set_bit(pc, arg ? GPSET0 : GPCLR0, pin); -+ break; -+ -+ default: -+ return -ENOTSUPP; -+ } -+ } /* for each config */ -+ -+ return 0; -+} -+ -+static const struct pinconf_ops bcm2711_pinconf_ops = { -+ .is_generic = true, -+ .pin_config_get = bcm2835_pinconf_get, -+ .pin_config_set = bcm2711_pinconf_set, -+}; -+ - static struct pinctrl_desc bcm2835_pinctrl_desc = { - .name = MODULE_NAME, - .pins = bcm2835_gpio_pins, -@@ -990,6 +1070,18 @@ static struct pinctrl_gpio_range bcm2835 - .npins = BCM2835_NUM_GPIOS, - }; - -+static const struct of_device_id bcm2835_pinctrl_match[] = { -+ { -+ .compatible = "brcm,bcm2835-gpio", -+ .data = &bcm2835_pinconf_ops, -+ }, -+ { -+ .compatible = "brcm,bcm2711-gpio", -+ .data = &bcm2711_pinconf_ops, -+ }, -+ {} -+}; -+ - static int bcm2835_pinctrl_probe(struct platform_device *pdev) - { - struct device *dev = &pdev->dev; -@@ -997,6 +1089,8 @@ static int bcm2835_pinctrl_probe(struct - struct bcm2835_pinctrl *pc; - struct resource iomem; - int err, i; -+ const struct of_device_id *match; -+ - BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_pins) != BCM2835_NUM_GPIOS); - BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_groups) != BCM2835_NUM_GPIOS); - -@@ -1073,6 +1167,12 @@ static int bcm2835_pinctrl_probe(struct - bcm2835_gpio_irq_handler); - } - -+ match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node); -+ if (match) { -+ bcm2835_pinctrl_desc.confops = -+ (const struct pinconf_ops *)match->data; -+ } -+ - pc->pctl_dev = devm_pinctrl_register(dev, &bcm2835_pinctrl_desc, pc); - if (IS_ERR(pc->pctl_dev)) { - gpiochip_remove(&pc->gpio_chip); -@@ -1087,11 +1187,6 @@ static int bcm2835_pinctrl_probe(struct - return 0; - } - --static const struct of_device_id bcm2835_pinctrl_match[] = { -- { .compatible = "brcm,bcm2835-gpio" }, -- {} --}; -- - static struct platform_driver bcm2835_pinctrl_driver = { - .probe = bcm2835_pinctrl_probe, - .driver = { |