diff options
Diffstat (limited to 'target/linux/brcm2708/patches-4.19/950-0713-ARM-dts-bcm283x-Enable-HDMI-at-board-level.patch')
| -rw-r--r-- | target/linux/brcm2708/patches-4.19/950-0713-ARM-dts-bcm283x-Enable-HDMI-at-board-level.patch | 163 |
1 files changed, 0 insertions, 163 deletions
diff --git a/target/linux/brcm2708/patches-4.19/950-0713-ARM-dts-bcm283x-Enable-HDMI-at-board-level.patch b/target/linux/brcm2708/patches-4.19/950-0713-ARM-dts-bcm283x-Enable-HDMI-at-board-level.patch deleted file mode 100644 index 82e126e8ff..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0713-ARM-dts-bcm283x-Enable-HDMI-at-board-level.patch +++ /dev/null @@ -1,163 +0,0 @@ -From a3cbeaaee57b7bda4e921bb2cff649fb56c0292d Mon Sep 17 00:00:00 2001 -From: Stefan Wahren <wahrenst@gmx.net> -Date: Tue, 17 Sep 2019 19:31:19 +0200 -Subject: [PATCH] ARM: dts: bcm283x: Enable HDMI at board level - -commit 60c833d5664e1b3f71c4471233469790adf505ca upstream. - -There might be headless setups of the Compute Module without HDMI, -so better enable HDMI at board level. Btw this allows moving HDMI -base definition into upcoming bcm2835-common.dtsi. - -Signed-off-by: Stefan Wahren <wahrenst@gmx.net> -Reviewed-by: Eric Anholt <eric@anholt.net> ---- - arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 2 ++ - arch/arm/boot/dts/bcm2835-rpi-a.dts | 2 ++ - arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 2 ++ - arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 2 ++ - arch/arm/boot/dts/bcm2835-rpi-b.dts | 2 ++ - arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts | 2 ++ - arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 2 ++ - arch/arm/boot/dts/bcm2835-rpi-zero.dts | 2 ++ - arch/arm/boot/dts/bcm2835-rpi.dtsi | 5 ----- - arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 2 ++ - arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 2 ++ - arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 2 ++ - 12 files changed, 22 insertions(+), 5 deletions(-) - ---- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts -+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts -@@ -100,6 +100,8 @@ - - &hdmi { - hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; -+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>; -+ status = "okay"; - }; - - &pwm { ---- a/arch/arm/boot/dts/bcm2835-rpi-a.dts -+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts -@@ -95,6 +95,8 @@ - - &hdmi { - hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; -+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>; -+ status = "okay"; - }; - - &pwm { ---- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts -+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts -@@ -102,6 +102,8 @@ - - &hdmi { - hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; -+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>; -+ status = "okay"; - }; - - &pwm { ---- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts -+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts -@@ -95,6 +95,8 @@ - - &hdmi { - hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; -+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>; -+ status = "okay"; - }; - - &pwm { ---- a/arch/arm/boot/dts/bcm2835-rpi-b.dts -+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts -@@ -90,6 +90,8 @@ - - &hdmi { - hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; -+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>; -+ status = "okay"; - }; - - &pwm { ---- a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts -+++ b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts -@@ -79,6 +79,8 @@ - - &hdmi { - hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; -+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>; -+ status = "okay"; - }; - - &sdhost { ---- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts -+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts -@@ -113,6 +113,8 @@ - - &hdmi { - hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; -+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>; -+ status = "okay"; - }; - - &sdhci { ---- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts -+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts -@@ -103,6 +103,8 @@ - - &hdmi { - hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; -+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>; -+ status = "okay"; - }; - - &sdhost { ---- a/arch/arm/boot/dts/bcm2835-rpi.dtsi -+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi -@@ -92,11 +92,6 @@ - power-domains = <&power RPI_POWER_DOMAIN_V3D>; - }; - --&hdmi { -- power-domains = <&power RPI_POWER_DOMAIN_HDMI>; -- status = "okay"; --}; -- - &vec { - power-domains = <&power RPI_POWER_DOMAIN_VEC>; - status = "okay"; ---- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts -+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts -@@ -40,6 +40,8 @@ - - &hdmi { - hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; -+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>; -+ status = "okay"; - }; - - &pwm { ---- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts -+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts -@@ -54,6 +54,8 @@ - - &hdmi { - hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>; -+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>; -+ status = "okay"; - }; - - &pwm { ---- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts -+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts -@@ -56,6 +56,8 @@ - - &hdmi { - hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>; -+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>; -+ status = "okay"; - }; - - /* uart0 communicates with the BT module */ |