aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.19/950-0695-overlays-Rename-pi3-overlays-to-be-less-model-specif.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.19/950-0695-overlays-Rename-pi3-overlays-to-be-less-model-specif.patch')
-rw-r--r--target/linux/brcm2708/patches-4.19/950-0695-overlays-Rename-pi3-overlays-to-be-less-model-specif.patch587
1 files changed, 0 insertions, 587 deletions
diff --git a/target/linux/brcm2708/patches-4.19/950-0695-overlays-Rename-pi3-overlays-to-be-less-model-specif.patch b/target/linux/brcm2708/patches-4.19/950-0695-overlays-Rename-pi3-overlays-to-be-less-model-specif.patch
deleted file mode 100644
index aa3118f038..0000000000
--- a/target/linux/brcm2708/patches-4.19/950-0695-overlays-Rename-pi3-overlays-to-be-less-model-specif.patch
+++ /dev/null
@@ -1,587 +0,0 @@
-From efd44306b7202c5e038cc98ea213e1146a93a960 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <pelwell@users.noreply.github.com>
-Date: Fri, 5 Jul 2019 14:49:22 +0100
-Subject: [PATCH 695/773] overlays: Rename pi3- overlays to be less
- model-specific (#3052)
-
-Rename the various pi3- overlays to be more generic, listing
-the devices they apply to in the README. The original names are
-retained for backwards compatibility as files that just include
-the new versions - the README marks them as being deprecated.
-
-See: https://github.com/raspberrypi/firmware/issues/1174
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- arch/arm/boot/dts/overlays/Makefile | 4 +
- arch/arm/boot/dts/overlays/README | 97 ++++++++++++-------
- .../arm/boot/dts/overlays/act-led-overlay.dts | 27 ++++++
- .../boot/dts/overlays/disable-bt-overlay.dts | 55 +++++++++++
- .../dts/overlays/disable-wifi-overlay.dts | 20 ++++
- .../boot/dts/overlays/miniuart-bt-overlay.dts | 74 ++++++++++++++
- .../boot/dts/overlays/pi3-act-led-overlay.dts | 28 +-----
- .../dts/overlays/pi3-disable-bt-overlay.dts | 56 +----------
- .../dts/overlays/pi3-disable-wifi-overlay.dts | 21 +---
- .../dts/overlays/pi3-miniuart-bt-overlay.dts | 75 +-------------
- 10 files changed, 246 insertions(+), 211 deletions(-)
- create mode 100644 arch/arm/boot/dts/overlays/act-led-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/disable-bt-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/disable-wifi-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/miniuart-bt-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -1,6 +1,7 @@
- # Overlays for the Raspberry Pi platform
-
- dtbo-$(CONFIG_ARCH_BCM2835) += \
-+ act-led.dtbo \
- adau1977-adc.dtbo \
- adau7002-simple.dtbo \
- ads1015.dtbo \
-@@ -26,6 +27,8 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
- dht11.dtbo \
- dionaudio-loco.dtbo \
- dionaudio-loco-v2.dtbo \
-+ disable-bt.dtbo \
-+ disable-wifi.dtbo \
- dpi18.dtbo \
- dpi24.dtbo \
- draws.dtbo \
-@@ -91,6 +94,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
- media-center.dtbo \
- midi-uart0.dtbo \
- midi-uart1.dtbo \
-+ miniuart-bt.dtbo \
- mmc.dtbo \
- mpu6050.dtbo \
- mz61581.dtbo \
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -180,14 +180,16 @@ Params:
-
- act_led_activelow Set to "on" to invert the sense of the LED
- (default "off")
-- N.B. For Pi3 see pi3-act-led overlay.
-+ N.B. For Pi 3B, 3B+, 3A+ and 4B, use the act-led
-+ overlay.
-
- act_led_gpio Set which GPIO to use for the activity LED
- (in case you want to connect it to an external
- device)
- (default "16" on a non-Plus board, "47" on a
- Plus or Pi 2)
-- N.B. For Pi3 see pi3-act-led overlay.
-+ N.B. For Pi 3B, 3B+, 3A+ and 4B, use the act-led
-+ overlay.
-
- pwr_led_trigger
- pwr_led_activelow
-@@ -205,6 +207,23 @@ Params:
- and the other i2c baudrate parameters.
-
-
-+Name: act-led
-+Info: Pi 3B, 3B+, 3A+ and 4B use a GPIO expander to drive the LEDs which can
-+ only be accessed from the VPU. There is a special driver for this with a
-+ separate DT node, which has the unfortunate consequence of breaking the
-+ act_led_gpio and act_led_activelow dtparams.
-+ This overlay changes the GPIO controller back to the standard one and
-+ restores the dtparams.
-+Load: dtoverlay=act-led,<param>=<val>
-+Params: activelow Set to "on" to invert the sense of the LED
-+ (default "off")
-+
-+ gpio Set which GPIO to use for the activity LED
-+ (in case you want to connect it to an external
-+ device)
-+ REQUIRED
-+
-+
- Name: adau1977-adc
- Info: Overlay for activation of ADAU1977 ADC codec over I2C for control
- and I2S for data.
-@@ -509,6 +528,21 @@ Params: 24db_digital_gain Allow ga
- that does not result in clipping/distortion!)
-
-
-+Name: disable-bt
-+Info: Disable onboard Bluetooth on Pi 3B, 3B+, 3A+, 4B and Zero W, restoring
-+ UART0/ttyAMA0 over GPIOs 14 & 15.
-+ N.B. To disable the systemd service that initialises the modem so it
-+ doesn't use the UART, use 'sudo systemctl disable hciuart'.
-+Load: dtoverlay=disable-bt
-+Params: <None>
-+
-+
-+Name: disable-wifi
-+Info: Disable onboard WiFi on Pi 3B, 3B+, 3A+, 4B and Zero W.
-+Load: dtoverlay=disable-wifi
-+Params: <None>
-+
-+
- Name: dpi18
- Info: Overlay for a generic 18-bit DPI display
- This uses GPIOs 0-21 (so no I2C, uart etc.), and activates the output
-@@ -1447,6 +1481,20 @@ Load: dtoverlay=midi-uart1
- Params: <None>
-
-
-+Name: miniuart-bt
-+Info: Switch the onboard Bluetooth function on Pi 3B, 3B+, 3A+, 4B and Zero W
-+ to use the mini-UART (ttyS0) and restore UART0/ttyAMA0 over GPIOs 14 &
-+ 15. Note that this may reduce the maximum usable baudrate.
-+ N.B. It is also necessary to edit /lib/systemd/system/hciuart.service
-+ and replace ttyAMA0 with ttyS0, unless using Raspbian or another
-+ distribution with udev rules that create /dev/serial0 and /dev/serial1,
-+ in which case use /dev/serial1 instead because it will always be
-+ correct. Furthermore, you must also set core_freq and core_freq_min to
-+ the same value in config.txt or the miniuart will not work.
-+Load: dtoverlay=miniuart-bt
-+Params: <None>
-+
-+
- Name: mmc
- Info: Selects the bcm2835-mmc SD/MMC driver, optionally with overclock
- Load: dtoverlay=mmc,<param>=<val>
-@@ -1509,48 +1557,27 @@ Params: panel Display
-
-
- Name: pi3-act-led
--Info: Pi3 uses a GPIO expander to drive the LEDs which can only be accessed
-- from the VPU. There is a special driver for this with a separate DT
-- node, which has the unfortunate consequence of breaking the
-- act_led_gpio and act_led_activelow dtparams.
-- This overlay changes the GPIO controller back to the standard one and
-- restores the dtparams.
--Load: dtoverlay=pi3-act-led,<param>=<val>
--Params: activelow Set to "on" to invert the sense of the LED
-- (default "off")
--
-- gpio Set which GPIO to use for the activity LED
-- (in case you want to connect it to an external
-- device)
-- REQUIRED
-+Info: This overlay has been renamed act-led, keeping pi3-act-led as an alias
-+ for backwards compatibility.
-+Load: <Deprecated>
-
-
- Name: pi3-disable-bt
--Info: Disable Pi3 Bluetooth and restore UART0/ttyAMA0 over GPIOs 14 & 15
-- N.B. To disable the systemd service that initialises the modem so it
-- doesn't use the UART, use 'sudo systemctl disable hciuart'.
--Load: dtoverlay=pi3-disable-bt
--Params: <None>
-+Info: This overlay has been renamed disable-bt, keeping pi3-disable-bt as an
-+ alias for backwards compatibility.
-+Load: <Deprecated>
-
-
- Name: pi3-disable-wifi
--Info: Disable Pi3 onboard WiFi
--Load: dtoverlay=pi3-disable-wifi
--Params: <None>
-+Info: This overlay has been renamed disable-wifi, keeping pi3-disable-wifi as
-+ an alias for backwards compatibility.
-+Load: <Deprecated>
-
-
- Name: pi3-miniuart-bt
--Info: Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore
-- UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum
-- usable baudrate.
-- N.B. It is also necessary to edit /lib/systemd/system/hciuart.service
-- and replace ttyAMA0 with ttyS0, unless you have a system with udev rules
-- that create /dev/serial0 and /dev/serial1, in which case use
-- /dev/serial1 instead because it will always be correct. Furthermore,
-- you must also set core_freq=250 in config.txt or the miniuart will not
-- work.
--Load: dtoverlay=pi3-miniuart-bt
--Params: <None>
-+Info: This overlay has been renamed miniuart-bt, keeping pi3-miniuart-bt as
-+ an alias for backwards compatibility.
-+Load: <Deprecated>
-
-
- Name: pibell
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/act-led-overlay.dts
-@@ -0,0 +1,27 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/* Pi3 uses a GPIO expander to drive the LEDs which can only be accessed
-+ from the VPU. There is a special driver for this with a separate DT node,
-+ which has the unfortunate consequence of breaking the act_led_gpio and
-+ act_led_activelow dtparams.
-+
-+ This overlay changes the GPIO controller back to the standard one and
-+ restores the dtparams.
-+*/
-+
-+/{
-+ compatible = "brcm,bcm2835";
-+
-+ fragment@0 {
-+ target = <&act_led>;
-+ frag0: __overlay__ {
-+ gpios = <&gpio 0 0>;
-+ };
-+ };
-+
-+ __overrides__ {
-+ gpio = <&frag0>,"gpios:4";
-+ activelow = <&frag0>,"gpios:8";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/disable-bt-overlay.dts
-@@ -0,0 +1,55 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/* Disable Bluetooth and restore UART0/ttyAMA0 over GPIOs 14 & 15.
-+ To disable the systemd service that initialises the modem so it doesn't use
-+ the UART:
-+
-+ sudo systemctl disable hciuart
-+*/
-+
-+/{
-+ compatible = "brcm,bcm2835";
-+
-+ fragment@0 {
-+ target = <&uart1>;
-+ __overlay__ {
-+ status = "disabled";
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&uart0>;
-+ __overlay__ {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins>;
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@2 {
-+ target = <&uart0_pins>;
-+ __overlay__ {
-+ brcm,pins;
-+ brcm,function;
-+ brcm,pull;
-+ };
-+ };
-+
-+ fragment@3 {
-+ target = <&bt_pins>;
-+ __overlay__ {
-+ brcm,pins;
-+ brcm,function;
-+ brcm,pull;
-+ };
-+ };
-+
-+ fragment@4 {
-+ target-path = "/aliases";
-+ __overlay__ {
-+ serial0 = "/soc/serial@7e201000";
-+ serial1 = "/soc/serial@7e215040";
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/disable-wifi-overlay.dts
-@@ -0,0 +1,20 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+ compatible = "brcm,bcm2835";
-+
-+ fragment@0 {
-+ target = <&mmc>;
-+ __overlay__ {
-+ status = "disabled";
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&mmcnr>;
-+ __overlay__ {
-+ status = "disabled";
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/miniuart-bt-overlay.dts
-@@ -0,0 +1,74 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/* Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore
-+ UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum
-+ usable baudrate.
-+
-+ It is also necessary to edit /lib/systemd/system/hciuart.service and
-+ replace ttyAMA0 with ttyS0, unless you have a system with udev rules
-+ that create /dev/serial0 and /dev/serial1, in which case use /dev/serial1
-+ instead because it will always be correct.
-+
-+ If cmdline.txt uses the alias serial0 to refer to the user-accessable port
-+ then the firmware will replace with the appropriate port whether or not
-+ this overlay is used.
-+*/
-+
-+/{
-+ compatible = "brcm,bcm2835";
-+
-+ fragment@0 {
-+ target = <&uart0>;
-+ __overlay__ {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins>;
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&uart1>;
-+ __overlay__ {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart1_pins &bt_pins &fake_bt_cts>;
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@2 {
-+ target = <&uart0_pins>;
-+ __overlay__ {
-+ brcm,pins;
-+ brcm,function;
-+ brcm,pull;
-+ };
-+ };
-+
-+ fragment@3 {
-+ target = <&uart1_pins>;
-+ __overlay__ {
-+ brcm,pins = <32 33>;
-+ brcm,function = <2>; /* alt5=UART1 */
-+ brcm,pull = <0 2>;
-+ };
-+ };
-+
-+ fragment@4 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ fake_bt_cts: fake_bt_cts {
-+ brcm,pins = <31>;
-+ brcm,function = <1>; /* output */
-+ };
-+ };
-+ };
-+
-+ fragment@5 {
-+ target-path = "/aliases";
-+ __overlay__ {
-+ serial0 = "/soc/serial@7e201000";
-+ serial1 = "/soc/serial@7e215040";
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts
-@@ -1,27 +1 @@
--/dts-v1/;
--/plugin/;
--
--/* Pi3 uses a GPIO expander to drive the LEDs which can only be accessed
-- from the VPU. There is a special driver for this with a separate DT node,
-- which has the unfortunate consequence of breaking the act_led_gpio and
-- act_led_activelow dtparams.
--
-- This overlay changes the GPIO controller back to the standard one and
-- restores the dtparams.
--*/
--
--/{
-- compatible = "brcm,bcm2835";
--
-- fragment@0 {
-- target = <&act_led>;
-- frag0: __overlay__ {
-- gpios = <&gpio 0 0>;
-- };
-- };
--
-- __overrides__ {
-- gpio = <&frag0>,"gpios:4";
-- activelow = <&frag0>,"gpios:8";
-- };
--};
-+#include "act-led-overlay.dts"
---- a/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts
-@@ -1,55 +1 @@
--/dts-v1/;
--/plugin/;
--
--/* Disable Bluetooth and restore UART0/ttyAMA0 over GPIOs 14 & 15.
-- To disable the systemd service that initialises the modem so it doesn't use
-- the UART:
--
-- sudo systemctl disable hciuart
--*/
--
--/{
-- compatible = "brcm,bcm2835";
--
-- fragment@0 {
-- target = <&uart1>;
-- __overlay__ {
-- status = "disabled";
-- };
-- };
--
-- fragment@1 {
-- target = <&uart0>;
-- __overlay__ {
-- pinctrl-names = "default";
-- pinctrl-0 = <&uart0_pins>;
-- status = "okay";
-- };
-- };
--
-- fragment@2 {
-- target = <&uart0_pins>;
-- __overlay__ {
-- brcm,pins;
-- brcm,function;
-- brcm,pull;
-- };
-- };
--
-- fragment@3 {
-- target = <&bt_pins>;
-- __overlay__ {
-- brcm,pins;
-- brcm,function;
-- brcm,pull;
-- };
-- };
--
-- fragment@4 {
-- target-path = "/aliases";
-- __overlay__ {
-- serial0 = "/soc/serial@7e201000";
-- serial1 = "/soc/serial@7e215040";
-- };
-- };
--};
-+#include "disable-bt-overlay.dts"
---- a/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts
-@@ -1,20 +1 @@
--/dts-v1/;
--/plugin/;
--
--/{
-- compatible = "brcm,bcm2835";
--
-- fragment@0 {
-- target = <&mmc>;
-- __overlay__ {
-- status = "disabled";
-- };
-- };
--
-- fragment@1 {
-- target = <&mmcnr>;
-- __overlay__ {
-- status = "disabled";
-- };
-- };
--};
-+#include "disable-wifi-overlay.dts"
---- a/arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts
-@@ -1,74 +1 @@
--/dts-v1/;
--/plugin/;
--
--/* Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore
-- UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum
-- usable baudrate.
--
-- It is also necessary to edit /lib/systemd/system/hciuart.service and
-- replace ttyAMA0 with ttyS0, unless you have a system with udev rules
-- that create /dev/serial0 and /dev/serial1, in which case use /dev/serial1
-- instead because it will always be correct.
--
-- If cmdline.txt uses the alias serial0 to refer to the user-accessable port
-- then the firmware will replace with the appropriate port whether or not
-- this overlay is used.
--*/
--
--/{
-- compatible = "brcm,bcm2835";
--
-- fragment@0 {
-- target = <&uart0>;
-- __overlay__ {
-- pinctrl-names = "default";
-- pinctrl-0 = <&uart0_pins>;
-- status = "okay";
-- };
-- };
--
-- fragment@1 {
-- target = <&uart1>;
-- __overlay__ {
-- pinctrl-names = "default";
-- pinctrl-0 = <&uart1_pins &bt_pins &fake_bt_cts>;
-- status = "okay";
-- };
-- };
--
-- fragment@2 {
-- target = <&uart0_pins>;
-- __overlay__ {
-- brcm,pins;
-- brcm,function;
-- brcm,pull;
-- };
-- };
--
-- fragment@3 {
-- target = <&uart1_pins>;
-- __overlay__ {
-- brcm,pins = <32 33>;
-- brcm,function = <2>; /* alt5=UART1 */
-- brcm,pull = <0 2>;
-- };
-- };
--
-- fragment@4 {
-- target = <&gpio>;
-- __overlay__ {
-- fake_bt_cts: fake_bt_cts {
-- brcm,pins = <31>;
-- brcm,function = <1>; /* output */
-- };
-- };
-- };
--
-- fragment@5 {
-- target-path = "/aliases";
-- __overlay__ {
-- serial0 = "/soc/serial@7e201000";
-- serial1 = "/soc/serial@7e215040";
-- };
-- };
--};
-+#include "miniuart-bt-overlay.dts"