aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.19/950-0635-ARM-dts-Add-bcm2711-rpi-4-b.dts-and-components.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.19/950-0635-ARM-dts-Add-bcm2711-rpi-4-b.dts-and-components.patch')
-rw-r--r--target/linux/brcm2708/patches-4.19/950-0635-ARM-dts-Add-bcm2711-rpi-4-b.dts-and-components.patch1129
1 files changed, 1129 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.19/950-0635-ARM-dts-Add-bcm2711-rpi-4-b.dts-and-components.patch b/target/linux/brcm2708/patches-4.19/950-0635-ARM-dts-Add-bcm2711-rpi-4-b.dts-and-components.patch
new file mode 100644
index 0000000000..b024b7fd6c
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.19/950-0635-ARM-dts-Add-bcm2711-rpi-4-b.dts-and-components.patch
@@ -0,0 +1,1129 @@
+From 8e0de1503575a5cb6810089b8fe40ad2309ac717 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Wed, 29 May 2019 13:54:21 +0100
+Subject: [PATCH 635/725] ARM: dts: Add bcm2711-rpi-4-b.dts and components
+
+Signed-off-by: Phil Elwell <phil@raspberrypi.org>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 320 ++++++++++++
+ arch/arm/boot/dts/bcm2711.dtsi | 50 ++
+ arch/arm/boot/dts/bcm2838.dtsi | 724 ++++++++++++++++++++++++++
+ 4 files changed, 1095 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+ create mode 100644 arch/arm/boot/dts/bcm2711.dtsi
+ create mode 100644 arch/arm/boot/dts/bcm2838.dtsi
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
+ bcm2708-rpi-zero-w.dtb \
+ bcm2709-rpi-2-b.dtb \
+ bcm2710-rpi-3-b.dtb \
++ bcm2711-rpi-4-b.dtb \
+ bcm2710-rpi-3-b-plus.dtb \
+ bcm2710-rpi-cm3.dtb
+
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+@@ -0,0 +1,320 @@
++/dts-v1/;
++
++#include "bcm2711.dtsi"
++
++/ {
++ compatible = "raspberrypi,4-model-b", "brcm,bcm2838", "brcm,bcm2837";
++ model = "Raspberry Pi 4 Model B";
++ #address-cells = <2>;
++ #size-cells = <1>;
++
++ memory {
++ device_type = "memory";
++ reg = <0x0 0x0 0x0>;
++ };
++
++ chosen {
++ bootargs = "8250.nr_uarts=1 cma=64M";
++ };
++
++ aliases {
++ serial0 = &uart1;
++ serial1 = &uart0;
++ mmc0 = &emmc2;
++ mmc1 = &mmcnr;
++ mmc2 = &sdhost;
++ /delete-property/ ethernet;
++ /delete-property/ intc;
++ ethernet0 = &genet;
++ };
++};
++
++&soc {
++ virtgpio: virtgpio {
++ compatible = "brcm,bcm2835-virtgpio";
++ gpio-controller;
++ #gpio-cells = <2>;
++ firmware = <&firmware>;
++ status = "okay";
++ };
++};
++
++&mmcnr {
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdio_pins>;
++ bus-width = <4>;
++ status = "okay";
++};
++
++&firmware {
++ expgpio: expgpio {
++ compatible = "raspberrypi,firmware-gpio";
++ gpio-controller;
++ #gpio-cells = <2>;
++ status = "okay";
++ };
++};
++
++&uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pins &bt_pins>;
++ status = "okay";
++};
++
++&uart1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart1_pins>;
++ status = "okay";
++};
++
++&spi0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
++
++ spidev0: spidev@0{
++ compatible = "spidev";
++ reg = <0>; /* CE0 */
++ #address-cells = <1>;
++ #size-cells = <0>;
++ spi-max-frequency = <125000000>;
++ };
++
++ spidev1: spidev@1{
++ compatible = "spidev";
++ reg = <1>; /* CE1 */
++ #address-cells = <1>;
++ #size-cells = <0>;
++ spi-max-frequency = <125000000>;
++ };
++};
++
++// =============================================
++// Board specific stuff here
++
++/ {
++
++ sd_io_1v8_reg: sd_io_1v8_reg {
++ status = "okay";
++ compatible = "regulator-gpio";
++ vin-supply = <&vdd_5v0_reg>;
++ regulator-name = "vdd-sd-io";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-boot-on;
++ regulator-always-on;
++ regulator-settling-time-us = <5000>;
++
++ gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
++ states = <1800000 0x1
++ 3300000 0x0>;
++ };
++};
++
++&sdhost {
++ status = "disabled";
++};
++
++&emmc2 {
++ status = "okay";
++ broken-cd;
++ vqmmc-supply = <&sd_io_1v8_reg>;
++};
++
++&leds {
++ act_led: act {
++ label = "led0";
++ linux,default-trigger = "mmc0";
++ gpios = <&gpio 42 0>;
++ };
++
++ pwr_led: pwr {
++ label = "led1";
++ linux,default-trigger = "input";
++ gpios = <&expgpio 2 0>;
++ };
++};
++
++&audio {
++ pinctrl-names = "default";
++ pinctrl-0 = <&audio_pins>;
++};
++
++&sdhost_gpio48 {
++ brcm,pins = <22 23 24 25 26 27>;
++ brcm,function = <BCM2835_FSEL_ALT0>;
++};
++
++&gpio {
++ spi0_pins: spi0_pins {
++ brcm,pins = <9 10 11>;
++ brcm,function = <BCM2835_FSEL_ALT0>;
++ };
++
++ spi0_cs_pins: spi0_cs_pins {
++ brcm,pins = <8 7>;
++ brcm,function = <BCM2835_FSEL_GPIO_OUT>;
++ };
++
++ spi3_pins: spi3_pins {
++ brcm,pins = <1 2 3>;
++ brcm,function = <BCM2835_FSEL_ALT3>;
++ };
++
++ spi3_cs_pins: spi3_cs_pins {
++ brcm,pins = <0 24>;
++ brcm,function = <BCM2835_FSEL_GPIO_OUT>;
++ };
++
++ spi4_pins: spi4_pins {
++ brcm,pins = <5 6 7>;
++ brcm,function = <BCM2835_FSEL_ALT3>;
++ };
++
++ spi4_cs_pins: spi4_cs_pins {
++ brcm,pins = <4 25>;
++ brcm,function = <BCM2835_FSEL_GPIO_OUT>;
++ };
++
++ spi5_pins: spi5_pins {
++ brcm,pins = <13 14 15>;
++ brcm,function = <BCM2835_FSEL_ALT3>;
++ };
++
++ spi5_cs_pins: spi5_cs_pins {
++ brcm,pins = <12 26>;
++ brcm,function = <BCM2835_FSEL_GPIO_OUT>;
++ };
++
++ spi6_pins: spi6_pins {
++ brcm,pins = <19 20 21>;
++ brcm,function = <BCM2835_FSEL_ALT3>;
++ };
++
++ spi6_cs_pins: spi6_cs_pins {
++ brcm,pins = <18 27>;
++ brcm,function = <BCM2835_FSEL_GPIO_OUT>;
++ };
++
++ i2c0_pins: i2c0 {
++ brcm,pins = <0 1>;
++ brcm,function = <BCM2835_FSEL_ALT0>;
++ };
++
++ i2c1_pins: i2c1 {
++ brcm,pins = <2 3>;
++ brcm,function = <BCM2835_FSEL_ALT0>;
++ };
++
++ i2c3_pins: i2c3 {
++ brcm,pins = <4 5>;
++ brcm,function = <BCM2835_FSEL_ALT5>;
++ };
++
++ i2c4_pins: i2c4 {
++ brcm,pins = <8 9>;
++ brcm,function = <BCM2835_FSEL_ALT5>;
++ };
++
++ i2c5_pins: i2c5 {
++ brcm,pins = <12 13>;
++ brcm,function = <BCM2835_FSEL_ALT5>;
++ };
++
++ i2c6_pins: i2c6 {
++ brcm,pins = <22 23>;
++ brcm,function = <BCM2835_FSEL_ALT5>;
++ };
++
++ i2s_pins: i2s {
++ brcm,pins = <18 19 20 21>;
++ brcm,function = <BCM2835_FSEL_ALT0>;
++ };
++
++ sdio_pins: sdio_pins {
++ brcm,pins = <34 35 36 37 38 39>;
++ brcm,function = <BCM2835_FSEL_ALT3>; // alt3 = SD1
++ brcm,pull = <0 2 2 2 2 2>;
++ };
++
++ bt_pins: bt_pins {
++ brcm,pins = "-"; // non-empty to keep btuart happy, //4 = 0
++ // to fool pinctrl
++ brcm,function = <0>;
++ brcm,pull = <2>;
++ };
++
++ uart0_pins: uart0_pins {
++ brcm,pins = <32 33>;
++ brcm,function = <BCM2835_FSEL_ALT3>;
++ brcm,pull = <0 2>;
++ };
++
++ uart1_pins: uart1_pins {
++ brcm,pins;
++ brcm,function;
++ brcm,pull;
++ };
++
++ uart2_pins: uart2_pins {
++ brcm,pins = <0 1>;
++ brcm,function = <BCM2835_FSEL_ALT4>;
++ brcm,pull = <0 2>;
++ };
++
++ uart3_pins: uart3_pins {
++ brcm,pins = <4 5>;
++ brcm,function = <BCM2835_FSEL_ALT4>;
++ brcm,pull = <0 2>;
++ };
++
++ uart4_pins: uart4_pins {
++ brcm,pins = <8 9>;
++ brcm,function = <BCM2835_FSEL_ALT4>;
++ brcm,pull = <0 2>;
++ };
++
++ uart5_pins: uart5_pins {
++ brcm,pins = <12 13>;
++ brcm,function = <BCM2835_FSEL_ALT4>;
++ brcm,pull = <0 2>;
++ };
++
++ audio_pins: audio_pins {
++ brcm,pins = <40 41>;
++ brcm,function = <4>;
++ };
++};
++
++&i2c0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c0_pins>;
++ clock-frequency = <100000>;
++};
++
++&i2c1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c1_pins>;
++ clock-frequency = <100000>;
++};
++
++&i2c2 {
++ clock-frequency = <100000>;
++};
++
++&i2s {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2s_pins>;
++};
++
++/ {
++ __overrides__ {
++ act_led_gpio = <&act_led>,"gpios:4";
++ act_led_activelow = <&act_led>,"gpios:8";
++ act_led_trigger = <&act_led>,"linux,default-trigger";
++
++ pwr_led_gpio = <&pwr_led>,"gpios:4";
++ pwr_led_activelow = <&pwr_led>,"gpios:8";
++ pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
++ };
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm2711.dtsi
+@@ -0,0 +1,50 @@
++#include "bcm2838.dtsi"
++#include "bcm270x.dtsi"
++#include "bcm2708-rpi.dtsi"
++
++/ {
++ soc {
++ /delete-node/ mailbox@7e00b840;
++ /delete-node/ v3d@7ec00000;
++ };
++
++ __overrides__ {
++ arm_freq;
++ };
++};
++
++&dma {
++ brcm,dma-channel-mask = <0x7ef5>;
++};
++
++&txp {
++ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&firmwarekms {
++ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&smi {
++ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&mmc {
++ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&mmcnr {
++ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&usb {
++ reg = <0x7e980000 0x10000>,
++ <0x7e00b200 0x200>;
++ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&gpio {
++ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm2838.dtsi
+@@ -0,0 +1,724 @@
++// SPDX-License-Identifier: GPL-2.0
++#include "bcm283x.dtsi"
++
++#include <dt-bindings/interrupt-controller/arm-gic.h>
++#include <dt-bindings/soc/bcm2835-pm.h>
++
++/ {
++ compatible = "brcm,bcm2838", "brcm,bcm2837";
++
++ interrupt-parent = <&gicv2>;
++
++ soc {
++ ranges = <0x7e000000 0x0 0xfe000000 0x01800000>,
++ <0x7c000000 0x0 0xfc000000 0x02000000>,
++ <0x40000000 0x0 0xff800000 0x00800000>;
++ /* Emulate a contiguous 30-bit address range for DMA */
++ dma-ranges = <0xc0000000 0x0 0x00000000 0x3c000000>;
++
++ /delete-node/ mailbox@7e00b840;
++ /delete-node/ interrupt-controller@7e00f300;
++
++ local_intc: local_intc@40000000 {
++ compatible = "brcm,bcm2836-l1-intc";
++ reg = <0x40000000 0x100>;
++ };
++
++ gicv2: gic400@40041000 {
++ interrupt-controller;
++ #interrupt-cells = <3>;
++ compatible = "arm,gic-400";
++ reg = <0x40041000 0x1000>,
++ <0x40042000 0x2000>,
++ <0x40046000 0x2000>,
++ <0x40048000 0x2000>;
++ };
++
++ thermal: thermal@7d5d2200 {
++ compatible = "brcm,avs-tmon-bcm2838";
++ reg = <0x7d5d2200 0x2c>;
++ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "tmon";
++ clocks = <&clocks BCM2835_CLOCK_TSENS>;
++ #thermal-sensor-cells = <0>;
++ status = "okay";
++ };
++
++ pm: watchdog@7e100000 {
++ reg = <0x7e100000 0x114>,
++ <0x7e00a000 0x24>,
++ <0x7ec11000 0x20>;
++ };
++
++ rng@7e104000 {
++ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
++ };
++
++ uart2: serial@7e201400 {
++ compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
++ reg = <0x7e201400 0x200>;
++ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2835_CLOCK_UART>,
++ <&clocks BCM2835_CLOCK_VPU>;
++ clock-names = "uartclk", "apb_pclk";
++ arm,primecell-periphid = <0x00241011>;
++ status = "disabled";
++ };
++
++ uart3: serial@7e201600 {
++ compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
++ reg = <0x7e201600 0x200>;
++ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2835_CLOCK_UART>,
++ <&clocks BCM2835_CLOCK_VPU>;
++ clock-names = "uartclk", "apb_pclk";
++ arm,primecell-periphid = <0x00241011>;
++ status = "disabled";
++ };
++
++ uart4: serial@7e201800 {
++ compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
++ reg = <0x7e201800 0x200>;
++ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2835_CLOCK_UART>,
++ <&clocks BCM2835_CLOCK_VPU>;
++ clock-names = "uartclk", "apb_pclk";
++ arm,primecell-periphid = <0x00241011>;
++ status = "disabled";
++ };
++
++ uart5: serial@7e201a00 {
++ compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
++ reg = <0x7e201a00 0x200>;
++ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2835_CLOCK_UART>,
++ <&clocks BCM2835_CLOCK_VPU>;
++ clock-names = "uartclk", "apb_pclk";
++ arm,primecell-periphid = <0x00241011>;
++ status = "disabled";
++ };
++
++ spi@7e204000 {
++ reg = <0x7e204000 0x0200>;
++ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
++ };
++
++ spi3: spi@7e204600 {
++ compatible = "brcm,bcm2835-spi";
++ reg = <0x7e204600 0x0200>;
++ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2835_CLOCK_VPU>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "disabled";
++ };
++
++ spi4: spi@7e204800 {
++ compatible = "brcm,bcm2835-spi";
++ reg = <0x7e204800 0x0200>;
++ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2835_CLOCK_VPU>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "disabled";
++ };
++
++ spi5: spi@7e204a00 {
++ compatible = "brcm,bcm2835-spi";
++ reg = <0x7e204a00 0x0200>;
++ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2835_CLOCK_VPU>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "disabled";
++ };
++
++ spi6: spi@7e204c00 {
++ compatible = "brcm,bcm2835-spi";
++ reg = <0x7e204c00 0x0200>;
++ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2835_CLOCK_VPU>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "disabled";
++ };
++
++ i2c3: i2c@7e205600 {
++ compatible = "brcm,bcm2835-i2c";
++ reg = <0x7e205600 0x200>;
++ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2835_CLOCK_VPU>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "disabled";
++ };
++
++ i2c4: i2c@7e205800 {
++ compatible = "brcm,bcm2835-i2c";
++ reg = <0x7e205800 0x200>;
++ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2835_CLOCK_VPU>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "disabled";
++ };
++
++ i2c5: i2c@7e205a00 {
++ compatible = "brcm,bcm2835-i2c";
++ reg = <0x7e205a00 0x200>;
++ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2835_CLOCK_VPU>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "disabled";
++ };
++
++ i2c6: i2c@7e205c00 {
++ compatible = "brcm,bcm2835-i2c";
++ reg = <0x7e205c00 0x200>;
++ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2835_CLOCK_VPU>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "disabled";
++ };
++
++ pixelvalve@7e206000 {
++ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
++ };
++
++ pixelvalve@7e207000 {
++ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
++ };
++
++ emmc2: emmc2@7e340000 {
++ compatible = "brcm,bcm2711-emmc2";
++ status = "okay";
++ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2838_CLOCK_EMMC2>;
++ reg = <0x7e340000 0x100>;
++ };
++
++ hvs@7e400000 {
++ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
++ };
++
++ pixelvalve@7e807000 {
++ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
++ };
++ };
++
++ arm-pmu {
++ /*
++ * N.B. the A72 PMU support only exists in arch/arm64, hence
++ * the fallback to the A53 version.
++ */
++ compatible = "arm,cortex-a72-pmu", "arm,cortex-a53-pmu";
++ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
++ };
++
++ timer {
++ compatible = "arm,armv7-timer";
++ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
++ IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
++ IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
++ IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
++ IRQ_TYPE_LEVEL_LOW)>;
++ arm,cpu-registers-not-fw-configured;
++ always-on;
++ };
++
++ cpus: cpus {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
++
++ cpu0: cpu@0 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <0>;
++ enable-method = "spin-table";
++ cpu-release-addr = <0x0 0x000000d8>;
++ };
++
++ cpu1: cpu@1 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <1>;
++ enable-method = "spin-table";
++ cpu-release-addr = <0x0 0x000000e0>;
++ };
++
++ cpu2: cpu@2 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <2>;
++ enable-method = "spin-table";
++ cpu-release-addr = <0x0 0x000000e8>;
++ };
++
++ cpu3: cpu@3 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <3>;
++ enable-method = "spin-table";
++ cpu-release-addr = <0x0 0x000000f0>;
++ };
++ };
++
++ v3dbus {
++ compatible = "simple-bus";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x7c500000 0x0 0xfc500000 0x03300000>,
++ <0x40000000 0x0 0xff800000 0x00800000>;
++ dma-ranges = <0x00000000 0x0 0x00000000 0x3c000000>;
++
++ v3d: v3d@7ec04000 {
++ compatible = "brcm,2711-v3d";
++ reg =
++ <0x7ec00000 0x4000>,
++ <0x7ec04000 0x4000>;
++ reg-names = "hub", "core0";
++
++ power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
++ resets = <&pm BCM2835_RESET_V3D>;
++ clocks = <&clocks BCM2835_CLOCK_V3D>;
++ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
++ status = "okay";
++ };
++ };
++
++ scb: scb {
++ compatible = "simple-bus";
++ #address-cells = <2>;
++ #size-cells = <1>;
++
++ ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>,
++ <0x0 0x40000000 0x0 0xff800000 0x00800000>,
++ <0x6 0x00000000 0x6 0x00000000 0x40000000>,
++ <0x0 0x00000000 0x0 0x00000000 0xfc000000>;
++ dma-ranges = <0x0 0x00000000 0x0 0x00000000 0xfc000000>;
++
++ pcie_0: pcie@7d500000 {
++ reg = <0x0 0x7d500000 0x9310>,
++ <0x0 0x7e00f300 0x20>;
++ msi-controller;
++ msi-parent = <&pcie_0>;
++ #address-cells = <3>;
++ #interrupt-cells = <1>;
++ #size-cells = <2>;
++ bus-range = <0x0 0x01>;
++ compatible = "brcm,bcm7211-pcie", "brcm,bcm7445-pcie",
++ "brcm,pci-plat-dev";
++ max-link-speed = <2>;
++ tot-num-pcie = <1>;
++ linux,pci-domain = <0>;
++ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "pcie", "msi";
++ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
++ interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
++ IRQ_TYPE_LEVEL_HIGH
++ 0 0 0 2 &gicv2 GIC_SPI 144
++ IRQ_TYPE_LEVEL_HIGH
++ 0 0 0 3 &gicv2 GIC_SPI 145
++ IRQ_TYPE_LEVEL_HIGH
++ 0 0 0 4 &gicv2 GIC_SPI 146
++ IRQ_TYPE_LEVEL_HIGH>;
++
++ /* Map outbound accesses from scb:0x6_00000000-03ffffff
++ * to pci:0x0_f8000000-fbffffff
++ */
++ ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
++ 0x0 0x04000000>;
++ /* Map inbound accesses from pci:0x0_00000000..ffffffff
++ * to scb:0x0_00000000-ffffffff
++ */
++ dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
++ 0x1 0x00000000>;
++ status = "okay";
++ };
++
++ genet: genet@7d580000 {
++ compatible = "brcm,genet-v5";
++ reg = <0x0 0x7d580000 0x10000>;
++ status = "okay";
++ #address-cells = <0x1>;
++ #size-cells = <0x1>;
++ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
++ phy-handle = <&phy1>;
++ phy-mode = "rgmii";
++ mdio@e14 {
++ #address-cells = <0x0>;
++ #size-cells = <0x1>;
++ compatible = "brcm,genet-mdio-v5";
++ reg = <0xe14 0x8>;
++ reg-names = "mdio";
++ phy1: genet-phy@0 {
++ compatible =
++ "ethernet-phy-ieee802.3-c22";
++ /* No interrupts - use PHY_POLL */
++ max-speed = <1000>;
++ reg = <0x1>;
++ };
++ };
++ };
++
++ xhci: xhci@7e9c0000 {
++ compatible = "generic-xhci";
++ status = "disabled";
++ reg = <0x0 0x7e9c0000 0x100000>;
++ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
++ };
++
++ vchiq: mailbox@7e00b840 {
++ compatible = "brcm,bcm2838-vchiq";
++ reg = <0 0x7e00b840 0x3c>;
++ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
++ };
++
++ hevc-decoder@7eb00000 {
++ compatible = "raspberrypi,argon-hevc-decoder";
++ reg = <0x0 0x7eb00000 0x10000>;
++ status = "okay";
++ };
++
++ argon-local-intc@7eb10000 {
++ compatible = "raspberrypi,argon-local-intc";
++ reg = <0x0 0x7eb10000 0x1000>;
++ status = "okay";
++ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
++ };
++
++ h264-decoder@7eb20000 {
++ compatible = "raspberrypi,argon-h264-decoder";
++ reg = <0x0 0x7eb20000 0x10000>;
++ status = "okay";
++ };
++
++ vp9-decoder@7eb30000 {
++ compatible = "raspberrypi,argon-vp9-decoder";
++ reg = <0x0 0x7eb30000 0x10000>;
++ status = "okay";
++ };
++ };
++};
++
++&clk_osc {
++ clock-frequency = <54000000>;
++};
++
++&clocks {
++ compatible = "brcm,bcm2838-cprman";
++};
++
++&cpu_thermal {
++ coefficients = <(-487) 410040>;
++};
++
++&dsi0 {
++ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&dsi1 {
++ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&gpio {
++ gpclk0_gpio49: gpclk0_gpio49 {
++ brcm,pins = <49>;
++ brcm,function = <BCM2835_FSEL_ALT1>;
++ brcm,pull = <BCM2835_PUD_OFF>;
++ };
++ gpclk1_gpio50: gpclk1_gpio50 {
++ brcm,pins = <50>;
++ brcm,function = <BCM2835_FSEL_ALT1>;
++ brcm,pull = <BCM2835_PUD_OFF>;
++ };
++ gpclk2_gpio51: gpclk2_gpio51 {
++ brcm,pins = <51>;
++ brcm,function = <BCM2835_FSEL_ALT1>;
++ brcm,pull = <BCM2835_PUD_OFF>;
++ };
++
++ i2c0_gpio46: i2c0_gpio46 {
++ brcm,pins = <46 47>;
++ brcm,function = <BCM2835_FSEL_ALT0>;
++ };
++ i2c1_gpio46: i2c1_gpio46 {
++ brcm,pins = <46 47>;
++ brcm,function = <BCM2835_FSEL_ALT1>;
++ };
++ i2c3_gpio2: i2c3_gpio2 {
++ brcm,pins = <2 3>;
++ brcm,function = <BCM2835_FSEL_ALT5>;
++ };
++ i2c3_gpio4: i2c3_gpio4 {
++ brcm,pins = <4 5>;
++ brcm,function = <BCM2835_FSEL_ALT5>;
++ };
++ i2c4_gpio6: i2c4_gpio6 {
++ brcm,pins = <6 7>;
++ brcm,function = <BCM2835_FSEL_ALT5>;
++ };
++ i2c4_gpio8: i2c4_gpio8 {
++ brcm,pins = <8 9>;
++ brcm,function = <BCM2835_FSEL_ALT5>;
++ };
++ i2c5_gpio10: i2c5_gpio10 {
++ brcm,pins = <10 11>;
++ brcm,function = <BCM2835_FSEL_ALT5>;
++ };
++ i2c5_gpio12: i2c5_gpio12 {
++ brcm,pins = <12 13>;
++ brcm,function = <BCM2835_FSEL_ALT5>;
++ };
++ i2c6_gpio0: i2c6_gpio0 {
++ brcm,pins = <0 1>;
++ brcm,function = <BCM2835_FSEL_ALT5>;
++ };
++ i2c6_gpio22: i2c6_gpio22 {
++ brcm,pins = <22 23>;
++ brcm,function = <BCM2835_FSEL_ALT5>;
++ };
++ i2c_slave_gpio8: i2c_slave_gpio8 {
++ brcm,pins = <8 9 10 11>;
++ brcm,function = <BCM2835_FSEL_ALT3>;
++ };
++
++ jtag_gpio48: jtag_gpio48 {
++ brcm,pins = <48 49 50 51 52 53>;
++ brcm,function = <BCM2835_FSEL_ALT4>;
++ };
++
++ mii_gpio28: mii_gpio28 {
++ brcm,pins = <28 29 30 31>;
++ brcm,function = <BCM2835_FSEL_ALT4>;
++ };
++ mii_gpio36: mii_gpio36 {
++ brcm,pins = <36 37 38 39>;
++ brcm,function = <BCM2835_FSEL_ALT5>;
++ };
++
++ pcm_gpio50: pcm_gpio50 {
++ brcm,pins = <50 51 52 53>;
++ brcm,function = <BCM2835_FSEL_ALT2>;
++ };
++
++ pwm0_gpio52: pwm0_gpio52 {
++ brcm,pins = <52>;
++ brcm,function = <BCM2835_FSEL_ALT1>;
++ brcm,pull = <BCM2835_PUD_OFF>;
++ };
++ pwm1_gpio53: pwm1_gpio53 {
++ brcm,pins = <53>;
++ brcm,function = <BCM2835_FSEL_ALT1>;
++ brcm,pull = <BCM2835_PUD_OFF>;
++ };
++
++ /* The following group consists of:
++ * RGMII_START_STOP
++ * RGMII_RX_OK
++ */
++ rgmii_gpio35: rgmii_gpio35 {
++ brcm,pins = <35 36>;
++ brcm,function = <BCM2835_FSEL_ALT4>;
++ };
++ rgmii_irq_gpio34: rgmii_irq_gpio34 {
++ brcm,pins = <34>;
++ brcm,function = <BCM2835_FSEL_ALT5>;
++ };
++ rgmii_irq_gpio39: rgmii_irq_gpio39 {
++ brcm,pins = <39>;
++ brcm,function = <BCM2835_FSEL_ALT4>;
++ };
++ rgmii_mdio_gpio28: rgmii_mdio_gpio28 {
++ brcm,pins = <28 29>;
++ brcm,function = <BCM2835_FSEL_ALT5>;
++ };
++ rgmii_mdio_gpio37: rgmii_mdio_gpio37 {
++ brcm,pins = <37 38>;
++ brcm,function = <BCM2835_FSEL_ALT4>;
++ };
++
++ spi0_gpio46: spi0_gpio46 {
++ brcm,pins = <46 47 48 49>;
++ brcm,function = <BCM2835_FSEL_ALT2>;
++ };
++ spi2_gpio46: spi2_gpio46 {
++ brcm,pins = <46 47 48 49 50>;
++ brcm,function = <BCM2835_FSEL_ALT5>;
++ };
++ spi3_gpio0: spi3_gpio0 {
++ brcm,pins = <0 1 2 3>;
++ brcm,function = <BCM2835_FSEL_ALT3>;
++ };
++ spi4_gpio4: spi4_gpio4 {
++ brcm,pins = <4 5 6 7>;
++ brcm,function = <BCM2835_FSEL_ALT3>;
++ };
++ spi5_gpio12: spi5_gpio12 {
++ brcm,pins = <12 13 14 15>;
++ brcm,function = <BCM2835_FSEL_ALT3>;
++ };
++ spi6_gpio18: spi6_gpio18 {
++ brcm,pins = <18 19 20 21>;
++ brcm,function = <BCM2835_FSEL_ALT3>;
++ };
++
++ uart2_gpio0: uart2_gpio0 {
++ brcm,pins = <0 1>;
++ brcm,function = <BCM2835_FSEL_ALT4>;
++ brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
++ };
++ uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 {
++ brcm,pins = <2 3>;
++ brcm,function = <BCM2835_FSEL_ALT4>;
++ brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
++ };
++ uart3_gpio4: uart3_gpio4 {
++ brcm,pins = <4 5>;
++ brcm,function = <BCM2835_FSEL_ALT4>;
++ brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
++ };
++ uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 {
++ brcm,pins = <6 7>;
++ brcm,function = <BCM2835_FSEL_ALT4>;
++ brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
++ };
++ uart4_gpio8: uart4_gpio8 {
++ brcm,pins = <8 9>;
++ brcm,function = <BCM2835_FSEL_ALT4>;
++ brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
++ };
++ uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 {
++ brcm,pins = <10 11>;
++ brcm,function = <BCM2835_FSEL_ALT4>;
++ brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
++ };
++ uart5_gpio12: uart5_gpio12 {
++ brcm,pins = <12 13>;
++ brcm,function = <BCM2835_FSEL_ALT4>;
++ brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
++ };
++ uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 {
++ brcm,pins = <14 15>;
++ brcm,function = <BCM2835_FSEL_ALT4>;
++ brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
++ };
++};
++
++&vec {
++ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&usb {
++ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&hdmi {
++ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&uart1 {
++ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&spi1 {
++ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&spi2 {
++ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&csi0 {
++ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&csi1 {
++ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&sdhci {
++ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&i2c0 {
++ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&i2c1 {
++ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&i2c2 {
++ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&gpio {
++ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&mailbox {
++ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&rng {
++ compatible = "brcm,bcm2838-rng200";
++};
++
++&sdhost {
++ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&uart0 {
++ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&dma {
++ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, /* dmalite 7 */
++ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, /* dmalite 8 */
++ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, /* dmalite 9 */
++ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, /* dmalite 10 */
++ /* DMA4 - 40 bit DMA engines */
++ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, /* dma4 11 */
++ <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, /* dma4 12 */
++ <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, /* dma4 13 */
++ <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; /* dma4 14 */
++ interrupt-names = "dma0",
++ "dma1",
++ "dma2",
++ "dma3",
++ "dma4",
++ "dma5",
++ "dma6",
++ "dma7",
++ "dma8",
++ "dma9",
++ "dma10",
++ "dma11",
++ "dma12",
++ "dma13",
++ "dma14";
++ brcm,dma-channel-mask = <0x7ef5>;
++};
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 04:13:38 +0000