aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.19/950-0531-PCI-brcmstb-Add-dma-range-mapping-for-inbound-traffi.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.19/950-0531-PCI-brcmstb-Add-dma-range-mapping-for-inbound-traffi.patch')
-rw-r--r--target/linux/brcm2708/patches-4.19/950-0531-PCI-brcmstb-Add-dma-range-mapping-for-inbound-traffi.patch569
1 files changed, 569 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.19/950-0531-PCI-brcmstb-Add-dma-range-mapping-for-inbound-traffi.patch b/target/linux/brcm2708/patches-4.19/950-0531-PCI-brcmstb-Add-dma-range-mapping-for-inbound-traffi.patch
new file mode 100644
index 0000000000..86f3384488
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.19/950-0531-PCI-brcmstb-Add-dma-range-mapping-for-inbound-traffi.patch
@@ -0,0 +1,569 @@
+From 155b86245f5c14317f41a0677ed78601fbe1f28b Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Tue, 19 Feb 2019 22:06:59 +0000
+Subject: [PATCH 531/725] PCI: brcmstb: Add dma-range mapping for inbound
+ traffic
+
+The Broadcom STB PCIe host controller is intimately related to the
+memory subsystem. This close relationship adds complexity to how cpu
+system memory is mapped to PCIe memory. Ideally, this mapping is an
+identity mapping, or an identity mapping off by a constant. Not so in
+this case.
+
+Consider the Broadcom reference board BCM97445LCC_4X8 which has 6 GB
+of system memory. Here is how the PCIe controller maps the
+system memory to PCIe memory:
+
+ memc0-a@[ 0....3fffffff] <=> pci@[ 0....3fffffff]
+ memc0-b@[100000000...13fffffff] <=> pci@[ 40000000....7fffffff]
+ memc1-a@[ 40000000....7fffffff] <=> pci@[ 80000000....bfffffff]
+ memc1-b@[300000000...33fffffff] <=> pci@[ c0000000....ffffffff]
+ memc2-a@[ 80000000....bfffffff] <=> pci@[100000000...13fffffff]
+ memc2-b@[c00000000...c3fffffff] <=> pci@[140000000...17fffffff]
+
+Although there are some "gaps" that can be added between the
+individual mappings by software, the permutation of memory regions for
+the most part is fixed by HW. The solution of having something close
+to an identity mapping is not possible.
+
+The idea behind this HW design is that the same PCIe module can
+act as an RC or EP, and if it acts as an EP it concatenates all
+of system memory into a BAR so anything can be accessed. Unfortunately,
+when the PCIe block is in the role of an RC it also presents this
+"BAR" to downstream PCIe devices, rather than offering an identity map
+between its system memory and PCIe space.
+
+Suppose that an endpoint driver allocs some DMA memory. Suppose this
+memory is located at 0x6000_0000, which is in the middle of memc1-a.
+The driver wants a dma_addr_t value that it can pass on to the EP to
+use. Without doing any custom mapping, the EP will use this value for
+DMA: the driver will get a dma_addr_t equal to 0x6000_0000. But this
+won't work; the device needs a dma_addr_t that reflects the PCIe space
+address, namely 0xa000_0000.
+
+So, essentially the solution to this problem must modify the
+dma_addr_t returned by the DMA routines routines. There are two
+ways (I know of) of doing this:
+
+(a) overriding/redefining the dma_to_phys() and phys_to_dma() calls
+that are used by the dma_ops routines. This is the approach of
+
+ arch/mips/cavium-octeon/dma-octeon.c
+
+In ARM and ARM64 these two routines are defiend in asm/dma-mapping.h
+as static inline functions.
+
+(b) Subscribe to a notifier that notifies when a device is added to a
+bus. When this happens, set_dma_ops() can be called for the device.
+This method is mentioned in:
+
+ http://lxr.free-electrons.com/source/drivers/of/platform.c?v=3.16#L152
+
+where it says as a comment
+
+ "In case if platform code need to use own special DMA
+ configuration, it can use Platform bus notifier and
+ handle BUS_NOTIFY_ADD_DEVICE event to fix up DMA
+ configuration."
+
+Solution (b) is what this commit does. It uses its own set of
+dma_ops which are wrappers around the arch_dma_ops. The
+wrappers translate the dma addresses before/after invoking
+the arch_dma_ops, as appropriate.
+
+Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
+---
+ drivers/pci/controller/pcie-brcmstb.c | 420 +++++++++++++++++++++++++-
+ 1 file changed, 411 insertions(+), 9 deletions(-)
+
+--- a/drivers/pci/controller/pcie-brcmstb.c
++++ b/drivers/pci/controller/pcie-brcmstb.c
+@@ -4,6 +4,7 @@
+ #include <linux/clk.h>
+ #include <linux/compiler.h>
+ #include <linux/delay.h>
++#include <linux/dma-mapping.h>
+ #include <linux/init.h>
+ #include <linux/interrupt.h>
+ #include <linux/io.h>
+@@ -319,11 +320,307 @@ static struct pci_ops brcm_pcie_ops = {
+ ((val & ~reg##_##field##_MASK) | \
+ (reg##_##field##_MASK & (field_val << reg##_##field##_SHIFT)))
+
++static const struct dma_map_ops *arch_dma_ops;
++static const struct dma_map_ops *brcm_dma_ops_ptr;
++static struct of_pci_range *dma_ranges;
++static int num_dma_ranges;
++
+ static phys_addr_t scb_size[BRCM_MAX_SCB];
+ static int num_memc;
+ static int num_pcie;
+ static DEFINE_MUTEX(brcm_pcie_lock);
+
++static dma_addr_t brcm_to_pci(dma_addr_t addr)
++{
++ struct of_pci_range *p;
++
++ if (!num_dma_ranges)
++ return addr;
++
++ for (p = dma_ranges; p < &dma_ranges[num_dma_ranges]; p++)
++ if (addr >= p->cpu_addr && addr < (p->cpu_addr + p->size))
++ return addr - p->cpu_addr + p->pci_addr;
++
++ return addr;
++}
++
++static dma_addr_t brcm_to_cpu(dma_addr_t addr)
++{
++ struct of_pci_range *p;
++
++ if (!num_dma_ranges)
++ return addr;
++
++ for (p = dma_ranges; p < &dma_ranges[num_dma_ranges]; p++)
++ if (addr >= p->pci_addr && addr < (p->pci_addr + p->size))
++ return addr - p->pci_addr + p->cpu_addr;
++
++ return addr;
++}
++
++static void *brcm_alloc(struct device *dev, size_t size, dma_addr_t *handle,
++ gfp_t gfp, unsigned long attrs)
++{
++ void *ret;
++
++ ret = arch_dma_ops->alloc(dev, size, handle, gfp, attrs);
++ if (ret)
++ *handle = brcm_to_pci(*handle);
++ return ret;
++}
++
++static void brcm_free(struct device *dev, size_t size, void *cpu_addr,
++ dma_addr_t handle, unsigned long attrs)
++{
++ handle = brcm_to_cpu(handle);
++ arch_dma_ops->free(dev, size, cpu_addr, handle, attrs);
++}
++
++static int brcm_mmap(struct device *dev, struct vm_area_struct *vma,
++ void *cpu_addr, dma_addr_t dma_addr, size_t size,
++ unsigned long attrs)
++{
++ dma_addr = brcm_to_cpu(dma_addr);
++ return arch_dma_ops->mmap(dev, vma, cpu_addr, dma_addr, size, attrs);
++}
++
++static int brcm_get_sgtable(struct device *dev, struct sg_table *sgt,
++ void *cpu_addr, dma_addr_t handle, size_t size,
++ unsigned long attrs)
++{
++ handle = brcm_to_cpu(handle);
++ return arch_dma_ops->get_sgtable(dev, sgt, cpu_addr, handle, size,
++ attrs);
++}
++
++static dma_addr_t brcm_map_page(struct device *dev, struct page *page,
++ unsigned long offset, size_t size,
++ enum dma_data_direction dir,
++ unsigned long attrs)
++{
++ return brcm_to_pci(arch_dma_ops->map_page(dev, page, offset, size,
++ dir, attrs));
++}
++
++static void brcm_unmap_page(struct device *dev, dma_addr_t handle,
++ size_t size, enum dma_data_direction dir,
++ unsigned long attrs)
++{
++ handle = brcm_to_cpu(handle);
++ arch_dma_ops->unmap_page(dev, handle, size, dir, attrs);
++}
++
++static int brcm_map_sg(struct device *dev, struct scatterlist *sgl,
++ int nents, enum dma_data_direction dir,
++ unsigned long attrs)
++{
++ int i, j;
++ struct scatterlist *sg;
++
++ for_each_sg(sgl, sg, nents, i) {
++#ifdef CONFIG_NEED_SG_DMA_LENGTH
++ sg->dma_length = sg->length;
++#endif
++ sg->dma_address =
++ brcm_dma_ops_ptr->map_page(dev, sg_page(sg), sg->offset,
++ sg->length, dir, attrs);
++ if (dma_mapping_error(dev, sg->dma_address))
++ goto bad_mapping;
++ }
++ return nents;
++
++bad_mapping:
++ for_each_sg(sgl, sg, i, j)
++ brcm_dma_ops_ptr->unmap_page(dev, sg_dma_address(sg),
++ sg_dma_len(sg), dir, attrs);
++ return 0;
++}
++
++static void brcm_unmap_sg(struct device *dev,
++ struct scatterlist *sgl, int nents,
++ enum dma_data_direction dir,
++ unsigned long attrs)
++{
++ int i;
++ struct scatterlist *sg;
++
++ for_each_sg(sgl, sg, nents, i)
++ brcm_dma_ops_ptr->unmap_page(dev, sg_dma_address(sg),
++ sg_dma_len(sg), dir, attrs);
++}
++
++static void brcm_sync_single_for_cpu(struct device *dev,
++ dma_addr_t handle, size_t size,
++ enum dma_data_direction dir)
++{
++ handle = brcm_to_cpu(handle);
++ arch_dma_ops->sync_single_for_cpu(dev, handle, size, dir);
++}
++
++static void brcm_sync_single_for_device(struct device *dev,
++ dma_addr_t handle, size_t size,
++ enum dma_data_direction dir)
++{
++ handle = brcm_to_cpu(handle);
++ arch_dma_ops->sync_single_for_device(dev, handle, size, dir);
++}
++
++static dma_addr_t brcm_map_resource(struct device *dev, phys_addr_t phys,
++ size_t size,
++ enum dma_data_direction dir,
++ unsigned long attrs)
++{
++ if (arch_dma_ops->map_resource)
++ return brcm_to_pci(arch_dma_ops->map_resource
++ (dev, phys, size, dir, attrs));
++ return brcm_to_pci((dma_addr_t)phys);
++}
++
++static void brcm_unmap_resource(struct device *dev, dma_addr_t handle,
++ size_t size, enum dma_data_direction dir,
++ unsigned long attrs)
++{
++ if (arch_dma_ops->unmap_resource)
++ arch_dma_ops->unmap_resource(dev, brcm_to_cpu(handle), size,
++ dir, attrs);
++}
++
++void brcm_sync_sg_for_cpu(struct device *dev, struct scatterlist *sgl,
++ int nents, enum dma_data_direction dir)
++{
++ struct scatterlist *sg;
++ int i;
++
++ for_each_sg(sgl, sg, nents, i)
++ brcm_dma_ops_ptr->sync_single_for_cpu(dev, sg_dma_address(sg),
++ sg->length, dir);
++}
++
++void brcm_sync_sg_for_device(struct device *dev, struct scatterlist *sgl,
++ int nents, enum dma_data_direction dir)
++{
++ struct scatterlist *sg;
++ int i;
++
++ for_each_sg(sgl, sg, nents, i)
++ brcm_dma_ops_ptr->sync_single_for_device(dev,
++ sg_dma_address(sg),
++ sg->length, dir);
++}
++
++static int brcm_mapping_error(struct device *dev, dma_addr_t dma_addr)
++{
++ return arch_dma_ops->mapping_error(dev, dma_addr);
++}
++
++static int brcm_dma_supported(struct device *dev, u64 mask)
++{
++ if (num_dma_ranges) {
++ /*
++ * It is our translated addresses that the EP will "see", so
++ * we check all of the ranges for the largest possible value.
++ */
++ int i;
++
++ for (i = 0; i < num_dma_ranges; i++)
++ if (dma_ranges[i].pci_addr + dma_ranges[i].size - 1
++ > mask)
++ return 0;
++ return 1;
++ }
++
++ return arch_dma_ops->dma_supported(dev, mask);
++}
++
++#ifdef ARCH_HAS_DMA_GET_REQUIRED_MASK
++u64 brcm_get_required_mask)(struct device *dev)
++{
++ return arch_dma_ops->get_required_mask(dev);
++}
++#endif
++
++static const struct dma_map_ops brcm_dma_ops = {
++ .alloc = brcm_alloc,
++ .free = brcm_free,
++ .mmap = brcm_mmap,
++ .get_sgtable = brcm_get_sgtable,
++ .map_page = brcm_map_page,
++ .unmap_page = brcm_unmap_page,
++ .map_sg = brcm_map_sg,
++ .unmap_sg = brcm_unmap_sg,
++ .map_resource = brcm_map_resource,
++ .unmap_resource = brcm_unmap_resource,
++ .sync_single_for_cpu = brcm_sync_single_for_cpu,
++ .sync_single_for_device = brcm_sync_single_for_device,
++ .sync_sg_for_cpu = brcm_sync_sg_for_cpu,
++ .sync_sg_for_device = brcm_sync_sg_for_device,
++ .mapping_error = brcm_mapping_error,
++ .dma_supported = brcm_dma_supported,
++#ifdef ARCH_HAS_DMA_GET_REQUIRED_MASK
++ .get_required_mask = brcm_get_required_mask,
++#endif
++};
++
++static void brcm_set_dma_ops(struct device *dev)
++{
++ int ret;
++
++ if (IS_ENABLED(CONFIG_ARM64)) {
++ /*
++ * We are going to invoke get_dma_ops(). That
++ * function, at this point in time, invokes
++ * get_arch_dma_ops(), and for ARM64 that function
++ * returns a pointer to dummy_dma_ops. So then we'd
++ * like to call arch_setup_dma_ops(), but that isn't
++ * exported. Instead, we call of_dma_configure(),
++ * which is exported, and this calls
++ * arch_setup_dma_ops(). Once we do this the call to
++ * get_dma_ops() will work properly because
++ * dev->dma_ops will be set.
++ */
++ ret = of_dma_configure(dev, dev->of_node, true);
++ if (ret) {
++ dev_err(dev, "of_dma_configure() failed: %d\n", ret);
++ return;
++ }
++ }
++
++ arch_dma_ops = get_dma_ops(dev);
++ if (!arch_dma_ops) {
++ dev_err(dev, "failed to get arch_dma_ops\n");
++ return;
++ }
++
++ set_dma_ops(dev, &brcm_dma_ops);
++}
++
++static int brcmstb_platform_notifier(struct notifier_block *nb,
++ unsigned long event, void *__dev)
++{
++ struct device *dev = __dev;
++
++ brcm_dma_ops_ptr = &brcm_dma_ops;
++ if (event != BUS_NOTIFY_ADD_DEVICE)
++ return NOTIFY_DONE;
++
++ brcm_set_dma_ops(dev);
++ return NOTIFY_OK;
++}
++
++static struct notifier_block brcmstb_platform_nb = {
++ .notifier_call = brcmstb_platform_notifier,
++};
++
++static int brcm_register_notifier(void)
++{
++ return bus_register_notifier(&pci_bus_type, &brcmstb_platform_nb);
++}
++
++static int brcm_unregister_notifier(void)
++{
++ return bus_unregister_notifier(&pci_bus_type, &brcmstb_platform_nb);
++}
++
+ static u32 rd_fld(void __iomem *p, u32 mask, int shift)
+ {
+ return (bcm_readl(p) & mask) >> shift;
+@@ -597,9 +894,71 @@ static inline void brcm_pcie_perst_set(s
+ WR_FLD_RB(pcie->base, PCIE_MISC_PCIE_CTRL, PCIE_PERSTB, !val);
+ }
+
++static int pci_dma_range_parser_init(struct of_pci_range_parser *parser,
++ struct device_node *node)
++{
++ const int na = 3, ns = 2;
++ int rlen;
++
++ parser->node = node;
++ parser->pna = of_n_addr_cells(node);
++ parser->np = parser->pna + na + ns;
++
++ parser->range = of_get_property(node, "dma-ranges", &rlen);
++ if (!parser->range)
++ return -ENOENT;
++
++ parser->end = parser->range + rlen / sizeof(__be32);
++
++ return 0;
++}
++
++static int brcm_pcie_parse_map_dma_ranges(struct brcm_pcie *pcie)
++{
++ int i;
++ struct of_pci_range_parser parser;
++ struct device_node *dn = pcie->dn;
++
++ /*
++ * Parse dma-ranges property if present. If there are multiple
++ * PCIe controllers, we only have to parse from one of them since
++ * the others will have an identical mapping.
++ */
++ if (!pci_dma_range_parser_init(&parser, dn)) {
++ unsigned int max_ranges
++ = (parser.end - parser.range) / parser.np;
++
++ dma_ranges = kcalloc(max_ranges, sizeof(struct of_pci_range),
++ GFP_KERNEL);
++ if (!dma_ranges)
++ return -ENOMEM;
++
++ for (i = 0; of_pci_range_parser_one(&parser, dma_ranges + i);
++ i++)
++ num_dma_ranges++;
++ }
++
++ for (i = 0, num_memc = 0; i < BRCM_MAX_SCB; i++) {
++ u64 size = brcmstb_memory_memc_size(i);
++
++ if (size == (u64)-1) {
++ dev_err(pcie->dev, "cannot get memc%d size", i);
++ return -EINVAL;
++ } else if (size) {
++ scb_size[i] = roundup_pow_of_two_64(size);
++ num_memc++;
++ } else {
++ break;
++ }
++ }
++
++ return 0;
++}
++
+ static int brcm_pcie_add_controller(struct brcm_pcie *pcie)
+ {
+ int i, ret = 0;
++ struct device *dev = pcie->dev;
+
+ mutex_lock(&brcm_pcie_lock);
+ if (num_pcie > 0) {
+@@ -607,12 +966,21 @@ static int brcm_pcie_add_controller(stru
+ goto done;
+ }
+
++ ret = brcm_register_notifier();
++ if (ret) {
++ dev_err(dev, "failed to register pci bus notifier\n");
++ goto done;
++ }
++ ret = brcm_pcie_parse_map_dma_ranges(pcie);
++ if (ret)
++ goto done;
++
+ /* Determine num_memc and their sizes */
+ for (i = 0, num_memc = 0; i < BRCM_MAX_SCB; i++) {
+ u64 size = brcmstb_memory_memc_size(i);
+
+ if (size == (u64)-1) {
+- dev_err(pcie->dev, "cannot get memc%d size\n", i);
++ dev_err(dev, "cannot get memc%d size\n", i);
+ ret = -EINVAL;
+ goto done;
+ } else if (size) {
+@@ -636,8 +1004,16 @@ done:
+ static void brcm_pcie_remove_controller(struct brcm_pcie *pcie)
+ {
+ mutex_lock(&brcm_pcie_lock);
+- if (--num_pcie == 0)
+- num_memc = 0;
++ if (--num_pcie > 0)
++ goto out;
++
++ if (brcm_unregister_notifier())
++ dev_err(pcie->dev, "failed to unregister pci bus notifier\n");
++ kfree(dma_ranges);
++ dma_ranges = NULL;
++ num_dma_ranges = 0;
++ num_memc = 0;
++out:
+ mutex_unlock(&brcm_pcie_lock);
+ }
+
+@@ -757,6 +1133,38 @@ static int brcm_pcie_setup(struct brcm_p
+ */
+ rc_bar2_offset = 0;
+
++ if (dma_ranges) {
++ /*
++ * The best-case scenario is to place the inbound
++ * region in the first 4GB of pci-space, as some
++ * legacy devices can only address 32bits.
++ * We would also like to put the MSI under 4GB
++ * as well, since some devices require a 32bit
++ * MSI target address.
++ */
++ if (total_mem_size <= 0xc0000000ULL &&
++ rc_bar2_size <= 0x100000000ULL) {
++ rc_bar2_offset = 0;
++ } else {
++ /*
++ * The system memory is 4GB or larger so we
++ * cannot start the inbound region at location
++ * 0 (since we have to allow some space for
++ * outbound memory @ 3GB). So instead we
++ * start it at the 1x multiple of its size
++ */
++ rc_bar2_offset = rc_bar2_size;
++ }
++
++ } else {
++ /*
++ * Set simple configuration based on memory sizes
++ * only. We always start the viewport at address 0,
++ * and set the MSI target address accordingly.
++ */
++ rc_bar2_offset = 0;
++ }
++
+ tmp = lower_32_bits(rc_bar2_offset);
+ tmp = INSERT_FIELD(tmp, PCIE_MISC_RC_BAR2_CONFIG_LO, SIZE,
+ encode_ibar_size(rc_bar2_size));
+@@ -967,7 +1375,6 @@ static int brcm_pcie_probe(struct platfo
+ struct brcm_pcie *pcie;
+ struct resource *res;
+ void __iomem *base;
+- u32 tmp;
+ struct pci_host_bridge *bridge;
+ struct pci_bus *child;
+
+@@ -984,11 +1391,6 @@ static int brcm_pcie_probe(struct platfo
+ return -EINVAL;
+ }
+
+- if (of_property_read_u32(dn, "dma-ranges", &tmp) == 0) {
+- dev_err(&pdev->dev, "cannot yet handle dma-ranges\n");
+- return -EINVAL;
+- }
+-
+ data = of_id->data;
+ pcie->reg_offsets = data->offsets;
+ pcie->reg_field_info = data->reg_field_info;
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 01:57:05 +0000