diff options
Diffstat (limited to 'target/linux/brcm2708/patches-4.19/950-0494-w1-ds2482-cosmetic-fixes-after-54865314f5a1.patch')
| -rw-r--r-- | target/linux/brcm2708/patches-4.19/950-0494-w1-ds2482-cosmetic-fixes-after-54865314f5a1.patch | 91 |
1 files changed, 91 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.19/950-0494-w1-ds2482-cosmetic-fixes-after-54865314f5a1.patch b/target/linux/brcm2708/patches-4.19/950-0494-w1-ds2482-cosmetic-fixes-after-54865314f5a1.patch new file mode 100644 index 0000000000..95d6a7f265 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0494-w1-ds2482-cosmetic-fixes-after-54865314f5a1.patch @@ -0,0 +1,91 @@ +From 2310c816beacba84d544e0ffc54b51ecba7ca853 Mon Sep 17 00:00:00 2001 +From: Mariusz Bialonczyk <manio@skyboo.net> +Date: Mon, 4 Mar 2019 12:23:36 +0100 +Subject: [PATCH 494/773] w1: ds2482: cosmetic fixes after 54865314f5a1 + +commit 5cb27d30fc3a281e830a2099d520b469e2b82008 upstream. + +We have a helper function ds2482_calculate_config() which is calculating +the config value, so just use it instead of passing the same variable +in all calls to this function. + +Also fixes the placement of module parameters to match with: +50fa2951bd74 (w1: Organize driver source to natural/common order) +by Andrew F. Davis + +Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net> +Cc: Andrew Worsley <amworsley@gmail.com> +Cc: Andrew F. Davis <afd@ti.com> +Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +--- + drivers/w1/masters/ds2482.c | 18 +++++++++++------- + 1 file changed, 11 insertions(+), 7 deletions(-) + +--- a/drivers/w1/masters/ds2482.c ++++ b/drivers/w1/masters/ds2482.c +@@ -37,6 +37,11 @@ module_param_named(active_pullup, ds2482 + MODULE_PARM_DESC(active_pullup, "Active pullup (apply to all buses): " \ + "0-disable, 1-enable (default)"); + ++/* extra configurations - e.g. 1WS */ ++static int extra_config; ++module_param(extra_config, int, S_IRUGO | S_IWUSR); ++MODULE_PARM_DESC(extra_config, "Extra Configuration settings 1=APU,2=PPM,3=SPU,8=1WS"); ++ + /** + * The DS2482 registers - there are 3 registers that are addressed by a read + * pointer. The read pointer is set by the last command executed. +@@ -70,8 +75,6 @@ MODULE_PARM_DESC(active_pullup, "Active + #define DS2482_REG_CFG_PPM 0x02 /* presence pulse masking */ + #define DS2482_REG_CFG_APU 0x01 /* active pull-up */ + +-/* extra configurations - e.g. 1WS */ +-static int extra_config; + + /** + * Write and verify codes for the CHANNEL_SELECT command (DS2482-800 only). +@@ -130,6 +133,8 @@ struct ds2482_data { + */ + static inline u8 ds2482_calculate_config(u8 conf) + { ++ conf |= extra_config; ++ + if (ds2482_active_pullup) + conf |= DS2482_REG_CFG_APU; + +@@ -405,7 +410,7 @@ static u8 ds2482_w1_reset_bus(void *data + /* If the chip did reset since detect, re-config it */ + if (err & DS2482_REG_STS_RST) + ds2482_send_cmd_data(pdev, DS2482_CMD_WRITE_CONFIG, +- ds2482_calculate_config(extra_config)); ++ ds2482_calculate_config(0x00)); + } + + mutex_unlock(&pdev->access_lock); +@@ -431,7 +436,8 @@ static u8 ds2482_w1_set_pullup(void *dat + ds2482_wait_1wire_idle(pdev); + /* note: it seems like both SPU and APU have to be set! */ + retval = ds2482_send_cmd_data(pdev, DS2482_CMD_WRITE_CONFIG, +- ds2482_calculate_config(extra_config|DS2482_REG_CFG_SPU|DS2482_REG_CFG_APU)); ++ ds2482_calculate_config(DS2482_REG_CFG_SPU | ++ DS2482_REG_CFG_APU)); + ds2482_wait_1wire_idle(pdev); + } + +@@ -484,7 +490,7 @@ static int ds2482_probe(struct i2c_clien + + /* Set all config items to 0 (off) */ + ds2482_send_cmd_data(data, DS2482_CMD_WRITE_CONFIG, +- ds2482_calculate_config(extra_config)); ++ ds2482_calculate_config(0x00)); + + mutex_init(&data->access_lock); + +@@ -559,7 +565,5 @@ module_i2c_driver(ds2482_driver); + + MODULE_AUTHOR("Ben Gardner <bgardner@wabtec.com>"); + MODULE_DESCRIPTION("DS2482 driver"); +-module_param(extra_config, int, S_IRUGO | S_IWUSR); +-MODULE_PARM_DESC(extra_config, "Extra Configuration settings 1=APU,2=PPM,3=SPU,8=1WS"); + + MODULE_LICENSE("GPL"); |