aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.19/950-0353-overlays-balenaFin-v1.1.0-carrier-board-update.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.19/950-0353-overlays-balenaFin-v1.1.0-carrier-board-update.patch')
-rw-r--r--target/linux/brcm2708/patches-4.19/950-0353-overlays-balenaFin-v1.1.0-carrier-board-update.patch109
1 files changed, 0 insertions, 109 deletions
diff --git a/target/linux/brcm2708/patches-4.19/950-0353-overlays-balenaFin-v1.1.0-carrier-board-update.patch b/target/linux/brcm2708/patches-4.19/950-0353-overlays-balenaFin-v1.1.0-carrier-board-update.patch
deleted file mode 100644
index a8ab145d78..0000000000
--- a/target/linux/brcm2708/patches-4.19/950-0353-overlays-balenaFin-v1.1.0-carrier-board-update.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From d9e484de16eef5f3daa61a8df462ff35ebe1aedc Mon Sep 17 00:00:00 2001
-From: Zahari Petkov <zahari@balena.io>
-Date: Fri, 8 Feb 2019 13:03:38 +0200
-Subject: [PATCH 353/703] overlays: balenaFin v1.1.0 carrier board update
-
-A backward compatible update for the balenaFin carrier board for the
-Raspberry Pi Compute Module 3/3+ Lite.
-
-The updated overlay includes:
- * support for the newly introduced RGB LEDs
- * i2c-gpio and SDIO improvements
- * DT based Marvell 88W8887 configuration
-
-Signed-off-by: Zahari Petkov <zahari@balena.io>
----
- arch/arm/boot/dts/overlays/README | 2 +-
- .../boot/dts/overlays/balena-fin-overlay.dts | 46 ++++++++++++++++++-
- 2 files changed, 45 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -472,7 +472,7 @@ Params: swap_lr Reverse
-
- Name: balena-fin
- Info: Overlay that enables WiFi, Bluetooth and the GPIO expander on the
-- Balena Fin board.
-+ balenaFin carrier board for the Raspberry Pi Compute Module 3/3+ Lite.
- Load: dtoverlay=balena-fin
- Params: <None>
-
---- a/arch/arm/boot/dts/overlays/balena-fin-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/balena-fin-overlay.dts
-@@ -11,6 +11,7 @@
- pinctrl-0 = <&sdio_pins>;
- bus-width = <4>;
- brcm,overclock-50 = <35>;
-+ non-removable;
- status = "okay";
- };
- };
-@@ -34,7 +35,8 @@
- fragment@2 {
- target-path = "/";
- __overlay__ {
-- // We should investigate how to switch to mmc-pwrseq-sd8787
-+ // We should switch to mmc-pwrseq-sd8787 after making it
-+ // compatible with sd8887
- // Currently that module requires two GPIOs to function since it
- // targets a slightly different chip
- power_ctrl: power_ctrl {
-@@ -46,10 +48,21 @@
- i2c_soft: i2c@0 {
- compatible = "i2c-gpio";
- gpios = <&gpio 43 0 /* sda */ &gpio 42 0 /* scl */>;
-- i2c-gpio,delay-us = <2>; /* ~100 kHz */
-+ i2c-gpio,delay-us = <5>;
-+ i2c-gpio,scl-open-drain;
-+ i2c-gpio,sda-open-drain;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-+
-+ sd8xxx-wlan {
-+ drvdbg = <0x6>;
-+ drv_mode = <0x1>;
-+ cfg80211_wext = <0xf>;
-+ sta_name = "wlan";
-+ wfd_name = "p2p";
-+ cal_data_cfg = "none";
-+ };
- };
- };
-
-@@ -74,6 +87,35 @@
- reg = <0x68>;
- status = "okay";
- };
-+
-+ // RGB LEDs (>= v1.1.0)
-+ pca9633: pca9633@62 {
-+ compatible = "nxp,pca9633";
-+ reg = <0x62>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ red@0 {
-+ label = "red";
-+ reg = <0>;
-+ linux,default-trigger = "none";
-+ };
-+ green@1 {
-+ label = "green";
-+ reg = <1>;
-+ linux,default-trigger = "none";
-+ };
-+ blue@2 {
-+ label = "blue";
-+ reg = <2>;
-+ linux,default-trigger = "none";
-+ };
-+ unused@3 {
-+ label = "unused";
-+ reg = <3>;
-+ linux,default-trigger = "none";
-+ };
-+ };
- };
- };
- };