aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.19/950-0292-overlays-Update-README-with-removal-of-lirc-rpi.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.19/950-0292-overlays-Update-README-with-removal-of-lirc-rpi.patch')
-rw-r--r--target/linux/brcm2708/patches-4.19/950-0292-overlays-Update-README-with-removal-of-lirc-rpi.patch91
1 files changed, 0 insertions, 91 deletions
diff --git a/target/linux/brcm2708/patches-4.19/950-0292-overlays-Update-README-with-removal-of-lirc-rpi.patch b/target/linux/brcm2708/patches-4.19/950-0292-overlays-Update-README-with-removal-of-lirc-rpi.patch
deleted file mode 100644
index 9adabcc8b8..0000000000
--- a/target/linux/brcm2708/patches-4.19/950-0292-overlays-Update-README-with-removal-of-lirc-rpi.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From a7544b1d73143b69134dd9ec665d0013775aca50 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Wed, 5 Dec 2018 11:56:40 +0000
-Subject: [PATCH 292/703] overlays: Update README with removal of lirc-rpi
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- arch/arm/boot/dts/overlays/README | 57 ++++++++++++-------------------
- 1 file changed, 21 insertions(+), 36 deletions(-)
-
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -56,23 +56,29 @@ have its contents deleted (or commented
- Using Overlays
- ==============
-
--Overlays are loaded using the "dtoverlay" directive. As an example, consider
--the popular lirc-rpi module, the Linux Infrared Remote Control driver. In the
--pre-DT world this would be loaded from /etc/modules, with an explicit
--"modprobe lirc-rpi" command, or programmatically by lircd. With DT enabled,
--this becomes a line in config.txt:
--
-- dtoverlay=lirc-rpi
--
--This causes the file /boot/overlays/lirc-rpi.dtbo to be loaded. By
--default it will use GPIOs 17 (out) and 18 (in), but this can be modified using
--DT parameters:
--
-- dtoverlay=lirc-rpi,gpio_out_pin=17,gpio_in_pin=13
--
--Parameters always have default values, although in some cases (e.g. "w1-gpio")
--it is necessary to provided multiple overlays in order to get the desired
--behaviour. See the list of overlays below for a description of the parameters
-+Overlays are loaded using the "dtoverlay" config.txt setting. As an example,
-+consider I2C Real Time Clock drivers. In the pre-DT world these would be loaded
-+by writing a magic string comprising a device identifier and an I2C address to
-+a special file in /sys/class/i2c-adapter, having first loaded the driver for
-+the I2C interface and the RTC device - something like this:
-+
-+ modprobe i2c-bcm2835
-+ modprobe rtc-ds1307
-+ echo ds1307 0x68 > /sys/class/i2c-adapter/i2c-1/new_device
-+
-+With DT enabled, this becomes a line in config.txt:
-+
-+ dtoverlay=i2c-rtc,ds1307
-+
-+This causes the file /boot/overlays/i2c-rtc.dtbo to be loaded and a "node"
-+describing the DS1307 I2C device to be added to the Device Tree for the Pi. By
-+default it usees address 0x68, but this can be modified with an additional DT
-+parameter:
-+
-+ dtoverlay=i2c-rtc,ds1307,addr=0x68
-+
-+Parameters usually have default values, although certain parameters are
-+mandatory. See the list of overlays below for a description of the parameters
- and their defaults.
-
- The Overlay and Parameter Reference
-@@ -1135,29 +1141,8 @@ Params: <None>
-
-
- Name: lirc-rpi
--Info: Configures lirc-rpi (Linux Infrared Remote Control for Raspberry Pi)
-- Consult the module documentation for more details.
--Load: dtoverlay=lirc-rpi,<param>=<val>
--Params: gpio_out_pin GPIO for output (default "17")
--
-- gpio_in_pin GPIO for input (default "18")
--
-- gpio_in_pull Pull up/down/off on the input pin
-- (default "down")
--
-- sense Override the IR receive auto-detection logic:
-- "0" = force active-high
-- "1" = force active-low
-- "-1" = use auto-detection
-- (default "-1")
--
-- softcarrier Turn the software carrier "on" or "off"
-- (default "on")
--
-- invert "on" = invert the output pin (default "off")
--
-- debug "on" = enable additional debug messages
-- (default "off")
-+Info: This overlay has been deprecated and removed - see gpio-ir
-+Load: <Deprecated>
-
-
- Name: ltc294x