1 files changed, 81 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.19/950-0224-lirc-rpi-Remove-in-favour-of-gpio-ir.patch b/target/linux/brcm2708/patches-4.19/950-0224-lirc-rpi-Remove-in-favour-of-gpio-ir.patch
new file mode 100644
index 0000000000..2aafb20c6e
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.19/950-0224-lirc-rpi-Remove-in-favour-of-gpio-ir.patch
@@ -0,0 +1,81 @@
+From e2c77b86039e8f16d6dd75e06a50dc7290e95233 Mon Sep 17 00:00:00 2001
+From: popcornmix <popcornmix@gmail.com>
+Date: Fri, 30 Nov 2018 18:55:23 +0000
+Subject: [PATCH 224/703] lirc-rpi: Remove in favour of gpio-ir
+
+---
+ arch/arm/boot/dts/overlays/Makefile           |  1 -
+ .../boot/dts/overlays/lirc-rpi-overlay.dts    | 57 -------------------
+ 2 files changed, 58 deletions(-)
+ delete mode 100644 arch/arm/boot/dts/overlays/lirc-rpi-overlay.dts
+
+--- a/arch/arm/boot/dts/overlays/Makefile
++++ b/arch/arm/boot/dts/overlays/Makefile
+@@ -68,7 +68,6 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
+ 	jedec-spi-nor.dtbo \
+ 	justboom-dac.dtbo \
+ 	justboom-digi.dtbo \
+-	lirc-rpi.dtbo \
+ 	ltc294x.dtbo \
+ 	mbed-dac.dtbo \
+ 	mcp23017.dtbo \
+--- a/arch/arm/boot/dts/overlays/lirc-rpi-overlay.dts
++++ /dev/null
+@@ -1,57 +0,0 @@
+-// Definitions for lirc-rpi module
+-/dts-v1/;
+-/plugin/;
+-
+-/ {
+-	compatible = "brcm,bcm2708";
+-
+-	fragment@0 {
+-		target-path = "/";
+-		__overlay__ {
+-			lirc_rpi: lirc_rpi {
+-				compatible = "rpi,lirc-rpi";
+-				pinctrl-names = "default";
+-				pinctrl-0 = <&lirc_pins>;
+-				status = "okay";
+-
+-				// Override autodetection of IR receiver circuit
+-				// (0 = active high, 1 = active low, -1 = no override )
+-				rpi,sense = <0xffffffff>;
+-
+-				// Software carrier
+-				// (0 = off, 1 = on)
+-				rpi,softcarrier = <1>;
+-
+-				// Invert output
+-				// (0 = off, 1 = on)
+-				rpi,invert = <0>;
+-
+-				// Enable debugging messages
+-				// (0 = off, 1 = on)
+-				rpi,debug = <0>;
+-			};
+-		};
+-	};
+-
+-	fragment@1 {
+-		target = <&gpio>;
+-		__overlay__ {
+-			lirc_pins: lirc_pins {
+-				brcm,pins = <17 18>;
+-				brcm,function = <1 0>; // out in
+-				brcm,pull = <0 1>; // off down
+-			};
+-		};
+-	};
+-
+-	__overrides__ {
+-		gpio_out_pin =  <&lirc_pins>,"brcm,pins:0";
+-		gpio_in_pin =   <&lirc_pins>,"brcm,pins:4";
+-		gpio_in_pull =  <&lirc_pins>,"brcm,pull:4";
+-
+-		sense =         <&lirc_rpi>,"rpi,sense:0";
+-		softcarrier =   <&lirc_rpi>,"rpi,softcarrier:0";
+-		invert =        <&lirc_rpi>,"rpi,invert:0";
+-		debug =         <&lirc_rpi>,"rpi,debug:0";
+-	};
+-};