aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.19/950-0176-dt-bindings-Document-BCM283x-CSI2-CCP2-receiver.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.19/950-0176-dt-bindings-Document-BCM283x-CSI2-CCP2-receiver.patch')
-rw-r--r--target/linux/brcm2708/patches-4.19/950-0176-dt-bindings-Document-BCM283x-CSI2-CCP2-receiver.patch103
1 files changed, 103 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.19/950-0176-dt-bindings-Document-BCM283x-CSI2-CCP2-receiver.patch b/target/linux/brcm2708/patches-4.19/950-0176-dt-bindings-Document-BCM283x-CSI2-CCP2-receiver.patch
new file mode 100644
index 0000000000..77fdd348d9
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.19/950-0176-dt-bindings-Document-BCM283x-CSI2-CCP2-receiver.patch
@@ -0,0 +1,103 @@
+From 8299df54f2016290eed7a2bece3885aad36d13e2 Mon Sep 17 00:00:00 2001
+From: Dave Stevenson <dave.stevenson@raspberrypi.org>
+Date: Wed, 31 Oct 2018 14:59:06 +0000
+Subject: [PATCH] dt-bindings: Document BCM283x CSI2/CCP2 receiver
+
+Document the DT bindings for the CSI2/CCP2 receiver peripheral
+(known as Unicam) on BCM283x SoCs.
+
+Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
+Acked-by: Rob Herring <robh@kernel.org>
+---
+ .../bindings/media/bcm2835-unicam.txt | 85 +++++++++++++++++++
+ 1 file changed, 85 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/media/bcm2835-unicam.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/media/bcm2835-unicam.txt
+@@ -0,0 +1,85 @@
++Broadcom BCM283x Camera Interface (Unicam)
++------------------------------------------
++
++The Unicam block on BCM283x SoCs is the receiver for either
++CSI-2 or CCP2 data from image sensors or similar devices.
++
++The main platform using this SoC is the Raspberry Pi family of boards.
++On the Pi the VideoCore firmware can also control this hardware block,
++and driving it from two different processors will cause issues.
++To avoid this, the firmware checks the device tree configuration
++during boot. If it finds device tree nodes called csi0 or csi1 then
++it will stop the firmware accessing the block, and it can then
++safely be used via the device tree binding.
++
++Required properties:
++===================
++- compatible : must be "brcm,bcm2835-unicam".
++- reg : physical base address and length of the register sets for the
++ device.
++- interrupts : should contain the IRQ line for this Unicam instance.
++- clocks : list of clock specifiers, corresponding to entries in
++ clock-names property.
++- clock-names : must contain an "lp" entry, matching entries in the
++ clocks property.
++
++Unicam supports a single port node. It should contain one 'port' child node
++with child 'endpoint' node. Please refer to the bindings defined in
++Documentation/devicetree/bindings/media/video-interfaces.txt.
++
++Within the endpoint node the "remote-endpoint" and "data-lanes" properties
++are mandatory.
++Data lane reordering is not supported so the data lanes must be in order,
++starting at 1. The number of data lanes should represent the number of
++usable lanes for the hardware block. That may be limited by either the SoC or
++how the platform presents the interface, and the lower value must be used.
++
++Lane reordering is not supported on the clock lane either, so the optional
++property "clock-lane" will implicitly be <0>.
++Similarly lane inversion is not supported, therefore "lane-polarities" will
++implicitly be <0 0 0 0 0>.
++Neither of these values will be checked.
++
++Example:
++ csi1: csi1@7e801000 {
++ compatible = "brcm,bcm2835-unicam";
++ reg = <0x7e801000 0x800>,
++ <0x7e802004 0x4>;
++ interrupts = <2 7>;
++ clocks = <&clocks BCM2835_CLOCK_CAM1>;
++ clock-names = "lp";
++
++ port {
++ csi1_ep: endpoint {
++ remote-endpoint = <&tc358743_0>;
++ data-lanes = <1 2>;
++ };
++ };
++ };
++
++ i2c0: i2c@7e205000 {
++ tc358743: csi-hdmi-bridge@0f {
++ compatible = "toshiba,tc358743";
++ reg = <0x0f>;
++
++ clocks = <&tc358743_clk>;
++ clock-names = "refclk";
++
++ tc358743_clk: bridge-clk {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <27000000>;
++ };
++
++ port {
++ tc358743_0: endpoint {
++ remote-endpoint = <&csi1_ep>;
++ clock-lanes = <0>;
++ data-lanes = <1 2>;
++ clock-noncontinuous;
++ link-frequencies =
++ /bits/ 64 <297000000>;
++ };
++ };
++ };
++ };