diff options
Diffstat (limited to 'target/linux/brcm2708/patches-4.14/950-0409-dtoverlays-Add-support-for-ADV7280-M-ADV7281-M-and-A.patch')
| -rw-r--r-- | target/linux/brcm2708/patches-4.14/950-0409-dtoverlays-Add-support-for-ADV7280-M-ADV7281-M-and-A.patch | 134 |
1 files changed, 134 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.14/950-0409-dtoverlays-Add-support-for-ADV7280-M-ADV7281-M-and-A.patch b/target/linux/brcm2708/patches-4.14/950-0409-dtoverlays-Add-support-for-ADV7280-M-ADV7281-M-and-A.patch new file mode 100644 index 0000000000..6b6bacca83 --- /dev/null +++ b/target/linux/brcm2708/patches-4.14/950-0409-dtoverlays-Add-support-for-ADV7280-M-ADV7281-M-and-A.patch @@ -0,0 +1,134 @@ +From c325695bc45f687cb2b206d02c8d8e7f3c1ad0a1 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson <dave.stevenson@raspberrypi.org> +Date: Thu, 23 Aug 2018 10:42:41 +0100 +Subject: [PATCH 409/454] dtoverlays: Add support for ADV7280-M, ADV7281-M and + ADV7281-MA chips. + +The driver that supports the ADV7282-M also supports the ADV7280-M, +ADV7281-M, and ADV7281-MA. +The 7280-M exposes 8 analogue inputs. The 7281-M doesn't have the +I2P deinterlacing block. The 7281-MA has 8 inputs but no I2P. +Otherwise they are the same as ADV7282-M. + +Adds a new overlay "adv728x" that includes the existing adv7282 +overlay but adds several parameters to modify the behaviour. + +Adds a new addr parameter to allow the I2C address to be changed. +(the chip has an address select pin to change between 0x20 and 0x21). + +Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 13 +++++++ + .../boot/dts/overlays/adv7282m-overlay.dts | 9 ++--- + .../boot/dts/overlays/adv728x-m-overlay.dts | 36 +++++++++++++++++++ + 4 files changed, 55 insertions(+), 4 deletions(-) + create mode 100644 arch/arm/boot/dts/overlays/adv728x-m-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -7,6 +7,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + ads1115.dtbo \ + ads7846.dtbo \ + adv7282m.dtbo \ ++ adv728x-m.dtbo \ + akkordion-iqdacplus.dtbo \ + allo-boss-dac-pcm512x-audio.dtbo \ + allo-digione.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -274,6 +274,19 @@ Info: Analog Devices ADV7282M analogue + Load: dtoverlay=adv7282m,<param>=<val> + Params: i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. + This is required for Pi B+, 2, 0, and 0W. ++ addr Overrides the I2C address (default 0x21) ++ ++ ++Name: adv728x-m ++Info: Analog Devices ADV728[0|1|2]-M analogue video to CSI2 bridges. ++ This is a wrapper for adv7282m, and defaults to ADV7282M. ++Load: dtoverlay=adv728x-m,<param>=<val> ++Params: i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. ++ This is required for Pi B+, 2, 0, and 0W. ++ addr Overrides the I2C address (default 0x21) ++ adv7280m Select ADV7280-M. ++ adv7281m Select ADV7281-M. ++ adv7281ma Select ADV7281-MA. + + + Name: akkordion-iqdacplus +--- a/arch/arm/boot/dts/overlays/adv7282m-overlay.dts ++++ b/arch/arm/boot/dts/overlays/adv7282m-overlay.dts +@@ -12,13 +12,13 @@ + #size-cells = <0>; + status = "okay"; + +- adv7282: adv7282@21 { ++ adv728x: adv728x@21 { + compatible = "adi,adv7282-m"; + reg = <0x21>; + status = "okay"; + clock-frequency = <24000000>; + port { +- adv7282_0: endpoint { ++ adv728x_0: endpoint { + remote-endpoint = <&csi1_ep>; + clock-lanes = <0>; + data-lanes = <1>; +@@ -42,7 +42,7 @@ + #address-cells = <1>; + #size-cells = <0>; + csi1_ep: endpoint { +- remote-endpoint = <&adv7282_0>; ++ remote-endpoint = <&adv728x_0>; + }; + }; + }; +@@ -70,6 +70,7 @@ + }; + + __overrides__ { +- i2c_pins_28_29 = <0>,"+2-3"; ++ i2c_pins_28_29 = <0>,"+2-3"; ++ addr = <&adv728x>,"reg:0"; + }; + }; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/adv728x-m-overlay.dts +@@ -0,0 +1,36 @@ ++// Definitions for Analog Devices ADV728[0|1|2]-M video to CSI2 bridges on VC ++// I2C bus ++ ++#include "adv7282m-overlay.dts" ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ // Fragment numbers deliberately high to avoid conflicts with the ++ // included adv7282m overlay file. ++ ++ fragment@101 { ++ target = <&adv728x>; ++ __dormant__ { ++ compatible = "adi,adv7280-m"; ++ }; ++ }; ++ fragment@102 { ++ target = <&adv728x>; ++ __dormant__ { ++ compatible = "adi,adv7281-m"; ++ }; ++ }; ++ fragment@103 { ++ target = <&adv728x>; ++ __dormant__ { ++ compatible = "adi,adv7281-ma"; ++ }; ++ }; ++ ++ __overrides__ { ++ adv7280m = <0>, "+101"; ++ adv7281m = <0>, "+102"; ++ adv7281ma = <0>, "+103"; ++ }; ++}; |