1 files changed, 0 insertions, 121 deletions
diff --git a/target/linux/brcm2708/patches-4.14/950-0290-overlays-Add-support-for-Balena-Fin-board.patch b/target/linux/brcm2708/patches-4.14/950-0290-overlays-Add-support-for-Balena-Fin-board.patch
deleted file mode 100644
index 1c317a6acf..0000000000
--- a/target/linux/brcm2708/patches-4.14/950-0290-overlays-Add-support-for-Balena-Fin-board.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-From 09e843542826ad1241d77d5ef9abb2bce21a0984 Mon Sep 17 00:00:00 2001
-From: Florin Sarbu <florin@resin.io>
-Date: Mon, 30 Apr 2018 09:11:52 +0200
-Subject: [PATCH 290/454] overlays: Add support for Balena Fin board
-
-Signed-off-by: Florin Sarbu <florin@resin.io>
----
- arch/arm/boot/dts/overlays/Makefile           |  1 +
- arch/arm/boot/dts/overlays/README             |  7 ++
- .../boot/dts/overlays/balena-fin-overlay.dts  | 79 +++++++++++++++++++
- 3 files changed, 87 insertions(+)
- create mode 100644 arch/arm/boot/dts/overlays/balena-fin-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -17,6 +17,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
- 	audioinjector-addons.dtbo \
- 	audioinjector-wm8731-audio.dtbo \
- 	audremap.dtbo \
-+	balena-fin.dtbo \
- 	bmp085_i2c-sensor.dtbo \
- 	dht11.dtbo \
- 	dionaudio-loco.dtbo \
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -404,6 +404,13 @@ Params: swap_lr                 Reverse
-                                 (default off)
- 
- 
-+Name:   balena-fin
-+Info:   Overlay that enables WiFi, Bluetooth and the GPIO expander on the
-+        Balena Fin board.
-+Load:   dtoverlay=balena-fin
-+Params: <None>
-+
-+
- Name:   bmp085_i2c-sensor
- Info:   This overlay is now deprecated - see i2c-sensor
- Load:   dtoverlay=bmp085_i2c-sensor
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/balena-fin-overlay.dts
-@@ -0,0 +1,79 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+	compatible = "brcm,bcm2708";
-+
-+	fragment@0 {
-+		target = <&mmc>;
-+		sdio_wifi: __overlay__ {
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&sdio_pins>;
-+			bus-width = <4>;
-+			brcm,overclock-50 = <35>;
-+			status = "okay";
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&gpio>;
-+		__overlay__ {
-+			sdio_pins: sdio_pins {
-+				brcm,pins = <34 35 36 37 38 39>;
-+				brcm,function = <7>; /* ALT3 = SD1 */
-+				brcm,pull = <0 2 2 2 2 2>;
-+			};
-+
-+			power_ctrl_pins: power_ctrl_pins {
-+				brcm,pins = <40>;
-+				brcm,function = <1>; // out
-+			};
-+		};
-+	};
-+
-+	fragment@2 {
-+		target-path = "/";
-+		__overlay__ {
-+			// We should investigate how to switch to mmc-pwrseq-sd8787
-+			// Currently that module requires two GPIOs to function since it
-+			// targets a slightly different chip
-+			power_ctrl: power_ctrl {
-+				compatible = "gpio-poweroff";
-+				gpios = <&gpio 40 1>;
-+				force;
-+			};
-+
-+			i2c_soft: i2c@0 {
-+				compatible = "i2c-gpio";
-+				gpios = <&gpio 43 0 /* sda */ &gpio 42 0 /* scl */>;
-+				i2c-gpio,delay-us = <2>; /* ~100 kHz */
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+			};
-+		};
-+	};
-+
-+	fragment@3 {
-+		target = <&i2c_soft>;
-+		__overlay__ {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "okay";
-+
-+			gpio_expander: gpio_expander@20 {
-+				compatible = "nxp,pca9554";
-+				gpio-controller;
-+				#gpio-cells = <2>;
-+				reg = <0x20>;
-+				status = "okay";
-+			};
-+
-+			// rtc clock
-+			ds1307: ds1307@68 {
-+				compatible = "maxim,ds1307";
-+				reg = <0x68>;
-+				status = "okay";
-+			};
-+		};
-+	};
-+};