diff options
Diffstat (limited to 'target/linux/brcm2708/patches-4.14/950-0274-overlays-Add-ds1621-to-the-i2c-sensor-overlay.patch')
| -rw-r--r-- | target/linux/brcm2708/patches-4.14/950-0274-overlays-Add-ds1621-to-the-i2c-sensor-overlay.patch | 97 |
1 files changed, 97 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.14/950-0274-overlays-Add-ds1621-to-the-i2c-sensor-overlay.patch b/target/linux/brcm2708/patches-4.14/950-0274-overlays-Add-ds1621-to-the-i2c-sensor-overlay.patch new file mode 100644 index 0000000000..fb0298c52c --- /dev/null +++ b/target/linux/brcm2708/patches-4.14/950-0274-overlays-Add-ds1621-to-the-i2c-sensor-overlay.patch @@ -0,0 +1,97 @@ +From 3c258618cbc0cddb7076b61a08755aa4f73d27db Mon Sep 17 00:00:00 2001 +From: Phil Elwell <phil@raspberrypi.org> +Date: Sun, 15 Apr 2018 10:36:15 +0100 +Subject: [PATCH 274/454] overlays: Add ds1621 to the i2c-sensor overlay + +The ds1621 enables the Dallas Semiconductors DS1621 temperature +sensor. + +See: https://github.com/raspberrypi/linux/issues/2509 + +Signed-off-by: Phil Elwell <phil@raspberrypi.org> +--- + arch/arm/boot/dts/overlays/README | 15 +++++++++------ + .../boot/dts/overlays/i2c-sensor-overlay.dts | 19 ++++++++++++++++++- + 2 files changed, 27 insertions(+), 7 deletions(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -821,8 +821,8 @@ Name: i2c-sensor + Info: Adds support for a number of I2C barometric pressure and temperature + sensors on i2c_arm + Load: dtoverlay=i2c-sensor,<param>=<val> +-Params: addr Set the address for the BME280, BMP280, TMP102, +- HDC100X, LM75 or SHT3x ++Params: addr Set the address for the BME280, BMP280, DS1621, ++ HDC100X, LM75, SHT3x or TMP102 + + bme280 Select the Bosch Sensortronic BME280 + Valid addresses 0x76-0x77, default 0x76 +@@ -834,6 +834,9 @@ Params: addr Set the + bmp280 Select the Bosch Sensortronic BMP280 + Valid addresses 0x76-0x77, default 0x76 + ++ ds1621 Select the Dallas Semiconductors DS1621 temp ++ sensor. Valid addresses 0x48-9x4f, default 0x48 ++ + hdc100x Select the Texas Instruments HDC100x temp sensor + Valid addresses 0x40-0x43, default 0x40 + +@@ -844,6 +847,10 @@ Params: addr Set the + + lm75addr Deprecated - use addr parameter instead + ++ sht3x Select the Sensiron SHT3x temperature and ++ humidity sensor. Valid addresses 0x44-0x45, ++ default 0x44 ++ + si7020 Select the Silicon Labs Si7013/20/21 humidity/ + temperature sensor + +@@ -856,10 +863,6 @@ Params: addr Set the + veml6070 Select the Vishay VEML6070 ultraviolet light + sensor + +- sht3x Select the Sensiron SHT3x temperature and +- humidity sensor. Valid addresses 0x44-0x45, +- default 0x44 +- + + Name: i2c0-bcm2708 + Info: Enable the i2c_bcm2708 driver for the i2c0 bus. Not all pin combinations +--- a/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts +@@ -186,9 +186,25 @@ + }; + }; + ++ fragment@12 { ++ target = <&i2c_arm>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ ds1621: ds1621@48 { ++ compatible = "ds1621"; ++ reg = <0x48>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ + __overrides__ { + addr = <&bme280>,"reg:0", <&bmp280>,"reg:0", <&tmp102>,"reg:0", +- <&lm75>,"reg:0", <&hdc100x>,"reg:0", <&sht3x>,"reg:0"; ++ <&lm75>,"reg:0", <&hdc100x>,"reg:0", <&sht3x>,"reg:0", ++ <&ds1621>,"reg:0"; + bme280 = <0>,"+0"; + bmp085 = <0>,"+1"; + bmp180 = <0>,"+2"; +@@ -202,5 +218,6 @@ + tsl4531 = <0>,"+9"; + veml6070 = <0>,"+10"; + sht3x = <0>,"+11"; ++ ds1621 = <0>,"+12"; + }; + }; |