aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.14/950-0260-Add-overlay-for-Semtech-SX150X-I2C-GPIO-Expanders.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.14/950-0260-Add-overlay-for-Semtech-SX150X-I2C-GPIO-Expanders.patch')
-rw-r--r--target/linux/brcm2708/patches-4.14/950-0260-Add-overlay-for-Semtech-SX150X-I2C-GPIO-Expanders.patch1759
1 files changed, 0 insertions, 1759 deletions
diff --git a/target/linux/brcm2708/patches-4.14/950-0260-Add-overlay-for-Semtech-SX150X-I2C-GPIO-Expanders.patch b/target/linux/brcm2708/patches-4.14/950-0260-Add-overlay-for-Semtech-SX150X-I2C-GPIO-Expanders.patch
deleted file mode 100644
index d66a88b768..0000000000
--- a/target/linux/brcm2708/patches-4.14/950-0260-Add-overlay-for-Semtech-SX150X-I2C-GPIO-Expanders.patch
+++ /dev/null
@@ -1,1759 +0,0 @@
-From 0b2881369a38b0a139ae4a256ea1953750fb6a76 Mon Sep 17 00:00:00 2001
-From: wavelet2 <a3d35232@btinternet.com>
-Date: Thu, 22 Mar 2018 19:08:02 +0000
-Subject: [PATCH 260/454] Add overlay for Semtech SX150X I2C GPIO Expanders
-
----
- arch/arm/boot/dts/overlays/Makefile | 1 +
- arch/arm/boot/dts/overlays/README | 19 +
- arch/arm/boot/dts/overlays/sx150x-overlay.dts | 1706 +++++++++++++++++
- 3 files changed, 1726 insertions(+)
- create mode 100644 arch/arm/boot/dts/overlays/sx150x-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -120,6 +120,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
- spi2-2cs.dtbo \
- spi2-3cs.dtbo \
- superaudioboard.dtbo \
-+ sx150x.dtbo \
- tinylcd35.dtbo \
- uart0.dtbo \
- uart1.dtbo \
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -1703,6 +1703,25 @@ Load: dtoverlay=superaudioboard,<param
- Params: gpiopin GPIO pin for codec reset
-
-
-+Name: sx150x
-+Info: Configures the Semtech SX150X I2C GPIO expanders.
-+Load: dtoverlay=sx150x,<param>=<val>
-+Params: sx150<x>-<n>-<m> Enables SX150X device on I2C#<n> with slave
-+ address <m>. <x> may be 1-9. <n> may be 0 or 1.
-+ Permissible values of <m> (which is denoted in
-+ hex) depend on the device variant. For SX1501,
-+ SX1502, SX1504 and SX1505, <m> may be 20 or 21.
-+ For SX1503 and SX1506, <m> may be 20. For
-+ SX1507 and SX1509, <m> may be 3E, 3F, 70 or 71.
-+ For SX1508, <m> may be 20, 21, 22 or 23.
-+
-+ sx150<x>-<n>-<m>-int-gpio
-+ Integer, enables interrupts on SX150X device on
-+ I2C#<n> with slave address <m>, specifies
-+ the GPIO pin to which NINT output of SX150X is
-+ connected.
-+
-+
- Name: tinylcd35
- Info: 3.5" Color TFT Display by www.tinylcd.com
- Options: Touch, RTC, keypad
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/sx150x-overlay.dts
-@@ -0,0 +1,1706 @@
-+// Definitions for SX150x I2C GPIO Expanders from Semtech
-+
-+// dtparams:
-+// sx150<x>-<n>-<m> - Enables SX150X device on I2C#<n> with slave address <m>. <x> may be 1-9.
-+// <n> may be 0 or 1. Permissible values of <m> (which is denoted in hex)
-+// depend on the device variant.
-+// For SX1501, SX1502, SX1504 and SX1505, <m> may be 20 or 21.
-+// For SX1503 and SX1506, <m> may be 20.
-+// For SX1507 and SX1509, <m> may be 3E, 3F, 70 or 71.
-+// For SX1508, <m> may be 20, 21, 22 or 23.
-+// sx150<x>-<n>-<m>-int-gpio - Integer, enables interrupts on SX150X device on I2C#<n> with slave address <m>,
-+// specifies the GPIO pin to which NINT output of SX150X is connected.
-+//
-+//
-+// Example 1: A single SX1505 device on I2C#1 with its slave address set to 0x20 and NINT output connected to GPIO25:
-+// dtoverlay=sx150x:sx1505-1-20,sx1505-1-20-int-gpio=25
-+//
-+// Example 2: Two SX1507 devices on I2C#0 with their slave addresses set to 0x3E and 0x70 (interrupts not used):
-+// dtoverlay=sx150x:sx1507-0-3E,sx1507-0-70
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
-+
-+ // Enable I2C#0 interface
-+ fragment@0 {
-+ target = <&i2c0>;
-+ __dormant__ {
-+ status = "okay";
-+ };
-+ };
-+
-+ // Enable I2C#1 interface
-+ fragment@1 {
-+ target = <&i2c1>;
-+ __dormant__ {
-+ status = "okay";
-+ };
-+ };
-+
-+ // Enable a SX1501 on I2C#0 at slave addr 0x20
-+ fragment@2 {
-+ target = <&i2c0>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1501_0_20: sx150x@20 {
-+ compatible = "semtech,sx1501q";
-+ reg = <0x20>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1501-0-20-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1501 on I2C#1 at slave addr 0x20
-+ fragment@3 {
-+ target = <&i2c1>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1501_1_20: sx150x@20 {
-+ compatible = "semtech,sx1501q";
-+ reg = <0x20>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1501-1-20-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1501 on I2C#0 at slave addr 0x21
-+ fragment@4 {
-+ target = <&i2c0>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1501_0_21: sx150x@21 {
-+ compatible = "semtech,sx1501q";
-+ reg = <0x21>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1501-0-21-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1501 on I2C#1 at slave addr 0x21
-+ fragment@5 {
-+ target = <&i2c1>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1501_1_21: sx150x@21 {
-+ compatible = "semtech,sx1501q";
-+ reg = <0x21>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1501-1-21-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1502 on I2C#0 at slave addr 0x20
-+ fragment@6 {
-+ target = <&i2c0>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1502_0_20: sx150x@20 {
-+ compatible = "semtech,sx1502q";
-+ reg = <0x20>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1502-0-20-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1502 on I2C#1 at slave addr 0x20
-+ fragment@7 {
-+ target = <&i2c1>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1502_1_20: sx150x@20 {
-+ compatible = "semtech,sx1502q";
-+ reg = <0x20>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1502-1-20-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1502 on I2C#0 at slave addr 0x21
-+ fragment@8 {
-+ target = <&i2c0>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1502_0_21: sx150x@21 {
-+ compatible = "semtech,sx1502q";
-+ reg = <0x21>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1502-0-21-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1502 on I2C#1 at slave addr 0x21
-+ fragment@9 {
-+ target = <&i2c1>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1502_1_21: sx150x@21 {
-+ compatible = "semtech,sx1502q";
-+ reg = <0x21>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1501-1-21-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1503 on I2C#0 at slave addr 0x20
-+ fragment@10 {
-+ target = <&i2c0>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1503_0_20: sx150x@20 {
-+ compatible = "semtech,sx1503q";
-+ reg = <0x20>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1503-0-20-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1503 on I2C#1 at slave addr 0x20
-+ fragment@11 {
-+ target = <&i2c1>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1503_1_20: sx150x@20 {
-+ compatible = "semtech,sx1503q";
-+ reg = <0x20>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1503-1-20-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1504 on I2C#0 at slave addr 0x20
-+ fragment@12 {
-+ target = <&i2c0>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1504_0_20: sx150x@20 {
-+ compatible = "semtech,sx1504q";
-+ reg = <0x20>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1504-0-20-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1504 on I2C#1 at slave addr 0x20
-+ fragment@13 {
-+ target = <&i2c1>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1504_1_20: sx150x@20 {
-+ compatible = "semtech,sx1504q";
-+ reg = <0x20>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1504-1-20-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1504 on I2C#0 at slave addr 0x21
-+ fragment@14 {
-+ target = <&i2c0>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1504_0_21: sx150x@21 {
-+ compatible = "semtech,sx1504q";
-+ reg = <0x21>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1504-0-21-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1504 on I2C#1 at slave addr 0x21
-+ fragment@15 {
-+ target = <&i2c1>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1504_1_21: sx150x@21 {
-+ compatible = "semtech,sx1504q";
-+ reg = <0x21>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1504-1-20-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1505 on I2C#0 at slave addr 0x20
-+ fragment@16 {
-+ target = <&i2c0>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1505_0_20: sx150x@20 {
-+ compatible = "semtech,sx1505q";
-+ reg = <0x20>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1505-0-20-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1505 on I2C#1 at slave addr 0x20
-+ fragment@17 {
-+ target = <&i2c1>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1505_1_20: sx150x@20 {
-+ compatible = "semtech,sx1505q";
-+ reg = <0x20>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1505-1-20-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1505 on I2C#0 at slave addr 0x21
-+ fragment@18 {
-+ target = <&i2c0>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1505_0_21: sx150x@21 {
-+ compatible = "semtech,sx1505q";
-+ reg = <0x21>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1505-0-21-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1505 on I2C#1 at slave addr 0x21
-+ fragment@19 {
-+ target = <&i2c1>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1505_1_21: sx150x@21 {
-+ compatible = "semtech,sx1505q";
-+ reg = <0x21>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1505-1-21-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1506 on I2C#0 at slave addr 0x20
-+ fragment@20 {
-+ target = <&i2c0>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1506_0_20: sx150x@20 {
-+ compatible = "semtech,sx1506q";
-+ reg = <0x20>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1506-0-20-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1506 on I2C#1 at slave addr 0x20
-+ fragment@21 {
-+ target = <&i2c1>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1506_1_20: sx150x@20 {
-+ compatible = "semtech,sx1506q";
-+ reg = <0x20>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1506-1-20-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1507 on I2C#0 at slave addr 0x3E
-+ fragment@22 {
-+ target = <&i2c0>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1507_0_3E: sx150x@3E {
-+ compatible = "semtech,sx1507q";
-+ reg = <0x3E>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1507_0_3E-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1507 on I2C#1 at slave addr 0x3E
-+ fragment@23 {
-+ target = <&i2c1>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1507_1_3E: sx150x@3E {
-+ compatible = "semtech,sx1507q";
-+ reg = <0x3E>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1507_1_3E-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1507 on I2C#0 at slave addr 0x3F
-+ fragment@24 {
-+ target = <&i2c0>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1507_0_3F: sx150x@3F {
-+ compatible = "semtech,sx1507q";
-+ reg = <0x3F>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1507_0_3F-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1507 on I2C#1 at slave addr 0x3F
-+ fragment@25 {
-+ target = <&i2c1>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1507_1_3F: sx150x@3F {
-+ compatible = "semtech,sx1507q";
-+ reg = <0x3F>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1507_1_3F-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1507 on I2C#0 at slave addr 0x70
-+ fragment@26 {
-+ target = <&i2c0>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1507_0_70: sx150x@70 {
-+ compatible = "semtech,sx1507q";
-+ reg = <0x70>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1507-0-70-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1507 on I2C#1 at slave addr 0x70
-+ fragment@27 {
-+ target = <&i2c1>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1507_1_70: sx150x@70 {
-+ compatible = "semtech,sx1507q";
-+ reg = <0x70>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1507-1-70-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1507 on I2C#0 at slave addr 0x71
-+ fragment@28 {
-+ target = <&i2c0>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1507_0_71: sx150x@71 {
-+ compatible = "semtech,sx1507q";
-+ reg = <0x71>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1507-0-71-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1507 on I2C#1 at slave addr 0x71
-+ fragment@29 {
-+ target = <&i2c1>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1507_1_71: sx150x@71 {
-+ compatible = "semtech,sx1507q";
-+ reg = <0x71>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1507-1-71-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1508 on I2C#0 at slave addr 0x20
-+ fragment@30 {
-+ target = <&i2c0>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1508_0_20: sx150x@20 {
-+ compatible = "semtech,sx1508q";
-+ reg = <0x20>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1508-0-20-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1508 on I2C#1 at slave addr 0x20
-+ fragment@31 {
-+ target = <&i2c1>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1508_1_20: sx150x@20 {
-+ compatible = "semtech,sx1508q";
-+ reg = <0x20>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1508-1-20-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1508 on I2C#0 at slave addr 0x21
-+ fragment@32 {
-+ target = <&i2c0>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1508_0_21: sx150x@21 {
-+ compatible = "semtech,sx1508q";
-+ reg = <0x21>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1508-0-21-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1508 on I2C#1 at slave addr 0x21
-+ fragment@33 {
-+ target = <&i2c1>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1508_1_21: sx150x@21 {
-+ compatible = "semtech,sx1508q";
-+ reg = <0x21>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1508-1-21-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1508 on I2C#0 at slave addr 0x22
-+ fragment@34 {
-+ target = <&i2c0>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1508_0_22: sx150x@22 {
-+ compatible = "semtech,sx1508q";
-+ reg = <0x22>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1508-0-22-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1508 on I2C#1 at slave addr 0x22
-+ fragment@35 {
-+ target = <&i2c1>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1508_1_22: sx150x@22 {
-+ compatible = "semtech,sx1508q";
-+ reg = <0x22>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1508-1-22-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1508 on I2C#0 at slave addr 0x23
-+ fragment@36 {
-+ target = <&i2c0>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1508_0_23: sx150x@23 {
-+ compatible = "semtech,sx1508q";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1508-0-23-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1508 on I2C#1 at slave addr 0x23
-+ fragment@37 {
-+ target = <&i2c1>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1508_1_23: sx150x@23 {
-+ compatible = "semtech,sx1508q";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1508-1-23-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1509 on I2C#0 at slave addr 0x3E
-+ fragment@38 {
-+ target = <&i2c0>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1509_0_3E: sx150x@3E {
-+ compatible = "semtech,sx1509q";
-+ reg = <0x3E>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1509_0_3E-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1509 on I2C#1 at slave addr 0x3E
-+ fragment@39 {
-+ target = <&i2c1>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1509_1_3E: sx150x@3E {
-+ compatible = "semtech,sx1509q";
-+ reg = <0x3E>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1509_1_3E-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1509 on I2C#0 at slave addr 0x3F
-+ fragment@40 {
-+ target = <&i2c0>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1509_0_3F: sx150x@3F {
-+ compatible = "semtech,sx1509q";
-+ reg = <0x3F>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1509_0_3F-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1509 on I2C#1 at slave addr 0x3F
-+ fragment@41 {
-+ target = <&i2c1>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1509_1_3F: sx150x@3F {
-+ compatible = "semtech,sx1509q";
-+ reg = <0x3F>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1509_1_3F-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1509 on I2C#0 at slave addr 0x70
-+ fragment@42 {
-+ target = <&i2c0>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1509_0_70: sx150x@70 {
-+ compatible = "semtech,sx1509q";
-+ reg = <0x70>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1509-0-70-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1509 on I2C#1 at slave addr 0x70
-+ fragment@43 {
-+ target = <&i2c1>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1509_1_70: sx150x@70 {
-+ compatible = "semtech,sx1509q";
-+ reg = <0x70>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1509-1-70-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1509 on I2C#0 at slave addr 0x71
-+ fragment@44 {
-+ target = <&i2c0>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1509_0_71: sx150x@71 {
-+ compatible = "semtech,sx1509q";
-+ reg = <0x71>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1509-0-71-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable a SX1509 on I2C#1 at slave addr 0x71
-+ fragment@45 {
-+ target = <&i2c1>;
-+ __dormant__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sx1509_1_71: sx150x@71 {
-+ compatible = "semtech,sx1509q";
-+ reg = <0x71>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ interrupts = <25 2>; /* 1st word overwritten by sx1509-1-71-int-gpio parameter
-+ 2nd word is 2 for falling-edge triggered */
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1501 on I2C#0 at slave addr 0x20
-+ fragment@46 {
-+ target = <&sx1501_0_20>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_0_20_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1501 on I2C#1 at slave addr 0x20
-+ fragment@47 {
-+ target = <&sx1501_1_20>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_1_20_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1501 on I2C#0 at slave addr 0x21
-+ fragment@48 {
-+ target = <&sx1501_0_21>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_0_21_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1501 on I2C#1 at slave addr 0x21
-+ fragment@49 {
-+ target = <&sx1501_1_21>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_1_21_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1502 on I2C#0 at slave addr 0x20
-+ fragment@50 {
-+ target = <&sx1502_0_20>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_0_20_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1502 on I2C#1 at slave addr 0x20
-+ fragment@51 {
-+ target = <&sx1502_1_20>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_1_20_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1502 on I2C#0 at slave addr 0x21
-+ fragment@52 {
-+ target = <&sx1502_0_21>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_0_21_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1502 on I2C#1 at slave addr 0x21
-+ fragment@53 {
-+ target = <&sx1502_1_21>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_1_21_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1503 on I2C#0 at slave addr 0x20
-+ fragment@54 {
-+ target = <&sx1503_0_20>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_0_20_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1503 on I2C#1 at slave addr 0x20
-+ fragment@55 {
-+ target = <&sx1503_1_20>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_1_20_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1504 on I2C#0 at slave addr 0x20
-+ fragment@56 {
-+ target = <&sx1504_0_20>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_0_20_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1504 on I2C#1 at slave addr 0x20
-+ fragment@57 {
-+ target = <&sx1504_1_20>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_1_20_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1504 on I2C#0 at slave addr 0x21
-+ fragment@58 {
-+ target = <&sx1504_0_21>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_0_21_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1504 on I2C#1 at slave addr 0x21
-+ fragment@59 {
-+ target = <&sx1504_1_21>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_1_21_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1505 on I2C#0 at slave addr 0x20
-+ fragment@60 {
-+ target = <&sx1505_0_20>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_0_20_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1505 on I2C#1 at slave addr 0x20
-+ fragment@61 {
-+ target = <&sx1505_1_20>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_1_20_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1505 on I2C#0 at slave addr 0x21
-+ fragment@62 {
-+ target = <&sx1505_0_21>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_0_21_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1505 on I2C#1 at slave addr 0x21
-+ fragment@63 {
-+ target = <&sx1505_1_21>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_1_21_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1506 on I2C#0 at slave addr 0x20
-+ fragment@64 {
-+ target = <&sx1506_0_20>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_0_20_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1506 on I2C#1 at slave addr 0x20
-+ fragment@65 {
-+ target = <&sx1506_1_20>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_1_20_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1507 on I2C#0 at slave addr 0x3E
-+ fragment@66 {
-+ target = <&sx1507_0_3E>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_0_3E_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1507 on I2C#1 at slave addr 0x3E
-+ fragment@67 {
-+ target = <&sx1507_1_3E>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_1_3E_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1507 on I2C#0 at slave addr 0x3F
-+ fragment@68 {
-+ target = <&sx1507_0_3F>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_0_3F_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1507 on I2C#1 at slave addr 0x3F
-+ fragment@69 {
-+ target = <&sx1507_1_3F>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_1_3F_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1507 on I2C#0 at slave addr 0x70
-+ fragment@70 {
-+ target = <&sx1507_0_70>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_1_70_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1507 on I2C#1 at slave addr 0x70
-+ fragment@71 {
-+ target = <&sx1507_1_70>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_1_70_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1507 on I2C#0 at slave addr 0x71
-+ fragment@72 {
-+ target = <&sx1507_0_71>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_0_71_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1507 on I2C#1 at slave addr 0x71
-+ fragment@73 {
-+ target = <&sx1507_1_71>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_1_71_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1508 on I2C#0 at slave addr 0x20
-+ fragment@74 {
-+ target = <&sx1508_0_20>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_0_20_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1508 on I2C#1 at slave addr 0x20
-+ fragment@75 {
-+ target = <&sx1508_1_20>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_1_20_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1508 on I2C#0 at slave addr 0x21
-+ fragment@76 {
-+ target = <&sx1508_0_21>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_0_21_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1508 on I2C#1 at slave addr 0x21
-+ fragment@77 {
-+ target = <&sx1508_1_21>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_1_21_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1508 on I2C#0 at slave addr 0x22
-+ fragment@78 {
-+ target = <&sx1508_0_22>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_0_22_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1508 on I2C#1 at slave addr 0x22
-+ fragment@79 {
-+ target = <&sx1508_1_22>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_1_22_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1508 on I2C#0 at slave addr 0x23
-+ fragment@80 {
-+ target = <&sx1508_0_23>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_0_23_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1508 on I2C#1 at slave addr 0x23
-+ fragment@81 {
-+ target = <&sx1508_1_23>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_1_23_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1509 on I2C#0 at slave addr 0x3E
-+ fragment@82 {
-+ target = <&sx1509_0_3E>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_0_3E_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1509 on I2C#1 at slave addr 0x3E
-+ fragment@83 {
-+ target = <&sx1509_1_3E>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_1_3E_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1509 on I2C#0 at slave addr 0x3F
-+ fragment@84 {
-+ target = <&sx1509_0_3F>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_0_3F_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1509 on I2C#1 at slave addr 0x3F
-+ fragment@85 {
-+ target = <&sx1509_1_3F>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_1_3F_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1509 on I2C#0 at slave addr 0x70
-+ fragment@86 {
-+ target = <&sx1509_0_70>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_0_70_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1509 on I2C#1 at slave addr 0x70
-+ fragment@87 {
-+ target = <&sx1509_1_70>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_1_70_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1509 on I2C#0 at slave addr 0x71
-+ fragment@88 {
-+ target = <&sx1509_0_71>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_0_71_pins>;
-+ };
-+ };
-+
-+ // Enable interrupts for a SX1509 on I2C#1 at slave addr 0x71
-+ fragment@89 {
-+ target = <&sx1509_1_71>;
-+ __dormant__ {
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sx150x_1_71_pins>;
-+ };
-+ };
-+
-+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x20
-+ // Configure as a input with no pull-up/down
-+ fragment@90 {
-+ target = <&gpio>;
-+ __dormant__ {
-+ sx150x_0_20_pins: sx150x_0_20_pins {
-+ brcm,pins = <0>; /* overwritten by sx150x-0-20-int-gpio parameter */
-+ brcm,function = <0>;
-+ brcm,pull = <0>;
-+ };
-+ };
-+ };
-+
-+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x20
-+ // Configure as a input with no pull-up/down
-+ fragment@91 {
-+ target = <&gpio>;
-+ __dormant__ {
-+ sx150x_1_20_pins: sx150x_1_20_pins {
-+ brcm,pins = <0>; /* overwritten by sx150x-1-20-int-gpio parameter */
-+ brcm,function = <0>;
-+ brcm,pull = <0>;
-+ };
-+ };
-+ };
-+
-+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x21
-+ // Configure as a input with no pull-up/down
-+ fragment@92 {
-+ target = <&gpio>;
-+ __dormant__ {
-+ sx150x_0_21_pins: sx150x_0_21_pins {
-+ brcm,pins = <0>; /* overwritten by sx150x-0-21-int-gpio parameter */
-+ brcm,function = <0>;
-+ brcm,pull = <0>;
-+ };
-+ };
-+ };
-+
-+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x21
-+ // Configure as a input with no pull-up/down
-+ fragment@93 {
-+ target = <&gpio>;
-+ __dormant__ {
-+ sx150x_1_21_pins: sx150x_1_21_pins {
-+ brcm,pins = <0>; /* overwritten by sx150x-1-21-int-gpio parameter */
-+ brcm,function = <0>;
-+ brcm,pull = <0>;
-+ };
-+ };
-+ };
-+
-+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x22
-+ // Configure as a input with no pull-up/down
-+ fragment@94 {
-+ target = <&gpio>;
-+ __dormant__ {
-+ sx150x_0_22_pins: sx150x_0_22_pins {
-+ brcm,pins = <0>; /* overwritten by sx150x-0-22-int-gpio parameter */
-+ brcm,function = <0>;
-+ brcm,pull = <0>;
-+ };
-+ };
-+ };
-+
-+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x22
-+ // Configure as a input with no pull-up/down
-+ fragment@95 {
-+ target = <&gpio>;
-+ __dormant__ {
-+ sx150x_1_22_pins: sx150x_1_22_pins {
-+ brcm,pins = <0>; /* overwritten by sx150x-1-22-int-gpio parameter */
-+ brcm,function = <0>;
-+ brcm,pull = <0>;
-+ };
-+ };
-+ };
-+
-+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x23
-+ // Configure as a input with no pull-up/down
-+ fragment@96 {
-+ target = <&gpio>;
-+ __dormant__ {
-+ sx150x_0_23_pins: sx150x_0_23_pins {
-+ brcm,pins = <0>; /* overwritten by sx150x-0-23-int-gpio parameter */
-+ brcm,function = <0>;
-+ brcm,pull = <0>;
-+ };
-+ };
-+ };
-+
-+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x23
-+ // Configure as a input with no pull-up/down
-+ fragment@97 {
-+ target = <&gpio>;
-+ __dormant__ {
-+ sx150x_1_23_pins: sx150x_1_23_pins {
-+ brcm,pins = <0>; /* overwritten by sx150x-1-23-int-gpio parameter */
-+ brcm,function = <0>;
-+ brcm,pull = <0>;
-+ };
-+ };
-+ };
-+
-+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x3E
-+ // Configure as a input with no pull-up/down
-+ fragment@98 {
-+ target = <&gpio>;
-+ __dormant__ {
-+ sx150x_0_3E_pins: sx150x_0_3E_pins {
-+ brcm,pins = <0>; /* overwritten by sx150x-0-3E-int-gpio parameter */
-+ brcm,function = <0>;
-+ brcm,pull = <0>;
-+ };
-+ };
-+ };
-+
-+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x3E
-+ // Configure as a input with no pull-up/down
-+ fragment@99 {
-+ target = <&gpio>;
-+ __dormant__ {
-+ sx150x_1_3E_pins: sx150x_1_3E_pins {
-+ brcm,pins = <0>; /* overwritten by sx150x-1-3E-int-gpio parameter */
-+ brcm,function = <0>;
-+ brcm,pull = <0>;
-+ };
-+ };
-+ };
-+
-+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x3F
-+ // Configure as a input with no pull-up/down
-+ fragment@100 {
-+ target = <&gpio>;
-+ __dormant__ {
-+ sx150x_0_3F_pins: sx150x_0_3F_pins {
-+ brcm,pins = <0>; /* overwritten by sx150x-0-3F-int-gpio parameter */
-+ brcm,function = <0>;
-+ brcm,pull = <0>;
-+ };
-+ };
-+ };
-+
-+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x3F
-+ // Configure as a input with no pull-up/down
-+ fragment@101 {
-+ target = <&gpio>;
-+ __dormant__ {
-+ sx150x_1_3F_pins: sx150x_1_3F_pins {
-+ brcm,pins = <0>; /* overwritten by sx150x-1-3F-int-gpio parameter */
-+ brcm,function = <0>;
-+ brcm,pull = <0>;
-+ };
-+ };
-+ };
-+
-+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x70
-+ // Configure as a input with no pull-up/down
-+ fragment@102 {
-+ target = <&gpio>;
-+ __dormant__ {
-+ sx150x_0_70_pins: sx150x_0_70_pins {
-+ brcm,pins = <0>; /* overwritten by sx150x-0-70-int-gpio parameter */
-+ brcm,function = <0>;
-+ brcm,pull = <0>;
-+ };
-+ };
-+ };
-+
-+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x70
-+ // Configure as a input with no pull-up/down
-+ fragment@103 {
-+ target = <&gpio>;
-+ __dormant__ {
-+ sx150x_1_70_pins: sx150x_1_70_pins {
-+ brcm,pins = <0>; /* overwritten by sx150x-1-70-int-gpio parameter */
-+ brcm,function = <0>;
-+ brcm,pull = <0>;
-+ };
-+ };
-+ };
-+
-+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x71
-+ // Configure as a input with no pull-up/down
-+ fragment@104 {
-+ target = <&gpio>;
-+ __dormant__ {
-+ sx150x_0_71_pins: sx150x_0_71_pins {
-+ brcm,pins = <0>; /* overwritten by sx150x-0-71-int-gpio parameter */
-+ brcm,function = <0>;
-+ brcm,pull = <0>;
-+ };
-+ };
-+ };
-+
-+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x71
-+ // Configure as a input with no pull-up/down
-+ fragment@105 {
-+ target = <&gpio>;
-+ __dormant__ {
-+ sx150x_1_71_pins: sx150x_1_71_pins {
-+ brcm,pins = <0>; /* overwritten by sx150x-1-71-int-gpio parameter */
-+ brcm,function = <0>;
-+ brcm,pull = <0>;
-+ };
-+ };
-+ };
-+
-+ __overrides__ {
-+ sx1501-0-20 = <0>,"+0+2";
-+ sx1501-1-20 = <0>,"+1+3";
-+ sx1501-0-21 = <0>,"+0+4";
-+ sx1501-1-21 = <0>,"+1+5";
-+ sx1502-0-20 = <0>,"+0+6";
-+ sx1502-1-20 = <0>,"+1+7";
-+ sx1502-0-21 = <0>,"+0+8";
-+ sx1502-1-21 = <0>,"+1+9";
-+ sx1503-0-20 = <0>,"+0+10";
-+ sx1503-1-20 = <0>,"+1+11";
-+ sx1504-0-20 = <0>,"+0+12";
-+ sx1504-1-20 = <0>,"+1+13";
-+ sx1504-0-21 = <0>,"+0+14";
-+ sx1504-1-21 = <0>,"+1+15";
-+ sx1505-0-20 = <0>,"+0+16";
-+ sx1505-1-20 = <0>,"+1+17";
-+ sx1505-0-21 = <0>,"+0+18";
-+ sx1505-1-21 = <0>,"+1+19";
-+ sx1506-0-20 = <0>,"+0+20";
-+ sx1506-1-20 = <0>,"+1+21";
-+ sx1507-0-3E = <0>,"+0+22";
-+ sx1507-1-3E = <0>,"+1+23";
-+ sx1507-0-3F = <0>,"+0+24";
-+ sx1507-1-3F = <0>,"+1+25";
-+ sx1507-0-70 = <0>,"+0+26";
-+ sx1507-1-70 = <0>,"+1+27";
-+ sx1507-0-71 = <0>,"+0+28";
-+ sx1507-1-71 = <0>,"+1+29";
-+ sx1508-0-20 = <0>,"+0+30";
-+ sx1508-1-20 = <0>,"+1+31";
-+ sx1508-0-21 = <0>,"+0+32";
-+ sx1508-1-21 = <0>,"+1+33";
-+ sx1508-0-22 = <0>,"+0+34";
-+ sx1508-1-22 = <0>,"+1+35";
-+ sx1508-0-23 = <0>,"+0+36";
-+ sx1508-1-23 = <0>,"+1+37";
-+ sx1509-0-3E = <0>,"+0+38";
-+ sx1509-1-3E = <0>,"+1+39";
-+ sx1509-0-3F = <0>,"+0+40";
-+ sx1509-1-3F = <0>,"+1+41";
-+ sx1509-0-70 = <0>,"+0+42";
-+ sx1509-1-70 = <0>,"+1+43";
-+ sx1509-0-71 = <0>,"+0+44";
-+ sx1509-1-71 = <0>,"+1+45";
-+ sx1501-0-20-int-gpio = <0>,"+46+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1501_0_20>,"interrupts:0";
-+ sx1501-1-20-int-gpio = <0>,"+47+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1501_1_20>,"interrupts:0";
-+ sx1501-0-21-int-gpio = <0>,"+48+92", <&sx150x_0_21_pins>,"brcm,pins:0", <&sx1501_0_21>,"interrupts:0";
-+ sx1501-1-21-int-gpio = <0>,"+49+93", <&sx150x_1_21_pins>,"brcm,pins:0", <&sx1501_1_21>,"interrupts:0";
-+ sx1502-0-20-int-gpio = <0>,"+50+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1502_0_20>,"interrupts:0";
-+ sx1502-1-20-int-gpio = <0>,"+51+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1502_1_20>,"interrupts:0";
-+ sx1502-0-21-int-gpio = <0>,"+52+92", <&sx150x_0_21_pins>,"brcm,pins:0", <&sx1502_0_21>,"interrupts:0";
-+ sx1502-1-21-int-gpio = <0>,"+53+93", <&sx150x_1_21_pins>,"brcm,pins:0", <&sx1502_1_21>,"interrupts:0";
-+ sx1503-0-20-int-gpio = <0>,"+54+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1503_0_20>,"interrupts:0";
-+ sx1503-1-20-int-gpio = <0>,"+55+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1503_1_20>,"interrupts:0";
-+ sx1504-0-20-int-gpio = <0>,"+56+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1504_0_20>,"interrupts:0";
-+ sx1504-1-20-int-gpio = <0>,"+57+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1504_1_20>,"interrupts:0";
-+ sx1504-0-21-int-gpio = <0>,"+58+92", <&sx150x_0_21_pins>,"brcm,pins:0", <&sx1504_0_21>,"interrupts:0";
-+ sx1504-1-21-int-gpio = <0>,"+59+93", <&sx150x_1_21_pins>,"brcm,pins:0", <&sx1504_1_21>,"interrupts:0";
-+ sx1505-0-20-int-gpio = <0>,"+60+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1505_0_20>,"interrupts:0";
-+ sx1505-1-20-int-gpio = <0>,"+61+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1505_1_20>,"interrupts:0";
-+ sx1505-0-21-int-gpio = <0>,"+62+92", <&sx150x_0_21_pins>,"brcm,pins:0", <&sx1505_0_21>,"interrupts:0";
-+ sx1505-1-21-int-gpio = <0>,"+63+93", <&sx150x_1_21_pins>,"brcm,pins:0", <&sx1505_1_21>,"interrupts:0";
-+ sx1506-0-20-int-gpio = <0>,"+64+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1506_0_20>,"interrupts:0";
-+ sx1506-1-20-int-gpio = <0>,"+65+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1506_1_20>,"interrupts:0";
-+ sx1507-0-3E-int-gpio = <0>,"+66+98", <&sx150x_0_3E_pins>,"brcm,pins:0", <&sx1507_0_3E>,"interrupts:0";
-+ sx1507-1-3E-int-gpio = <0>,"+67+99", <&sx150x_1_3E_pins>,"brcm,pins:0", <&sx1507_1_3E>,"interrupts:0";
-+ sx1507-0-3F-int-gpio = <0>,"+68+100", <&sx150x_0_3F_pins>,"brcm,pins:0", <&sx1507_0_3F>,"interrupts:0";
-+ sx1507-1-3F-int-gpio = <0>,"+69+101", <&sx150x_1_3F_pins>,"brcm,pins:0", <&sx1507_1_3F>,"interrupts:0";
-+ sx1507-0-70-int-gpio = <0>,"+60+102", <&sx150x_0_70_pins>,"brcm,pins:0", <&sx1507_0_70>,"interrupts:0";
-+ sx1507-1-70-int-gpio = <0>,"+71+103", <&sx150x_1_70_pins>,"brcm,pins:0", <&sx1507_1_70>,"interrupts:0";
-+ sx1507-0-71-int-gpio = <0>,"+72+104", <&sx150x_0_71_pins>,"brcm,pins:0", <&sx1507_0_71>,"interrupts:0";
-+ sx1507-1-71-int-gpio = <0>,"+73+105", <&sx150x_1_71_pins>,"brcm,pins:0", <&sx1507_1_71>,"interrupts:0";
-+ sx1508-0-20-int-gpio = <0>,"+74+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1508_0_20>,"interrupts:0";
-+ sx1508-1-20-int-gpio = <0>,"+75+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1508_1_20>,"interrupts:0";
-+ sx1508-0-21-int-gpio = <0>,"+76+92", <&sx150x_0_21_pins>,"brcm,pins:0", <&sx1508_0_21>,"interrupts:0";
-+ sx1508-1-21-int-gpio = <0>,"+77+93", <&sx150x_1_21_pins>,"brcm,pins:0", <&sx1508_1_21>,"interrupts:0";
-+ sx1508-0-22-int-gpio = <0>,"+78+94", <&sx150x_0_22_pins>,"brcm,pins:0", <&sx1508_0_22>,"interrupts:0";
-+ sx1508-1-22-int-gpio = <0>,"+79+95", <&sx150x_1_22_pins>,"brcm,pins:0", <&sx1508_1_22>,"interrupts:0";
-+ sx1508-0-23-int-gpio = <0>,"+80+96", <&sx150x_0_23_pins>,"brcm,pins:0", <&sx1508_0_23>,"interrupts:0";
-+ sx1508-1-23-int-gpio = <0>,"+81+97", <&sx150x_1_23_pins>,"brcm,pins:0", <&sx1508_1_23>,"interrupts:0";
-+ sx1509-0-3E-int-gpio = <0>,"+82+98", <&sx150x_0_3E_pins>,"brcm,pins:0", <&sx1509_0_3E>,"interrupts:0";
-+ sx1509-1-3E-int-gpio = <0>,"+83+99", <&sx150x_1_3E_pins>,"brcm,pins:0", <&sx1509_1_3E>,"interrupts:0";
-+ sx1509-0-3F-int-gpio = <0>,"+84+100", <&sx150x_0_3F_pins>,"brcm,pins:0", <&sx1509_0_3F>,"interrupts:0";
-+ sx1509-1-3F-int-gpio = <0>,"+85+101", <&sx150x_1_3F_pins>,"brcm,pins:0", <&sx1509_1_3F>,"interrupts:0";
-+ sx1509-0-70-int-gpio = <0>,"+86+102", <&sx150x_0_70_pins>,"brcm,pins:0", <&sx1509_0_70>,"interrupts:0";
-+ sx1509-1-70-int-gpio = <0>,"+87+103", <&sx150x_1_70_pins>,"brcm,pins:0", <&sx1509_1_70>,"interrupts:0";
-+ sx1509-0-71-int-gpio = <0>,"+88+104", <&sx150x_0_71_pins>,"brcm,pins:0", <&sx1509_0_71>,"interrupts:0";
-+ sx1509-1-71-int-gpio = <0>,"+89+105", <&sx150x_1_71_pins>,"brcm,pins:0", <&sx1509_1_71>,"interrupts:0";
-+ };
-+};
-+
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-12 17:52:12 +0000