aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.14/950-0250-BCM270X_DT-Add-Pi-3-dts-files.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.14/950-0250-BCM270X_DT-Add-Pi-3-dts-files.patch')
-rw-r--r--target/linux/brcm2708/patches-4.14/950-0250-BCM270X_DT-Add-Pi-3-dts-files.patch274
1 files changed, 0 insertions, 274 deletions
diff --git a/target/linux/brcm2708/patches-4.14/950-0250-BCM270X_DT-Add-Pi-3-dts-files.patch b/target/linux/brcm2708/patches-4.14/950-0250-BCM270X_DT-Add-Pi-3-dts-files.patch
deleted file mode 100644
index 55727d529b..0000000000
--- a/target/linux/brcm2708/patches-4.14/950-0250-BCM270X_DT-Add-Pi-3-dts-files.patch
+++ /dev/null
@@ -1,274 +0,0 @@
-From 09bd29626a880f4bbcd4d3b3ebbdbaf170e0b27c Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Fri, 21 Jul 2017 11:33:25 +0100
-Subject: [PATCH 250/454] BCM270X_DT: Add Pi 3+ dts files
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts | 183 +++++++++++++++++++++
- arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi | 36 ++++
- arch/arm/boot/dts/overlays/README | 8 +
- 4 files changed, 228 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts
- create mode 100644 arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
- bcm2708-rpi-0-w.dtb \
- bcm2709-rpi-2-b.dtb \
- bcm2710-rpi-3-b.dtb \
-+ bcm2710-rpi-3-b-plus.dtb \
- bcm2710-rpi-cm3.dtb
-
- dtb-$(CONFIG_ARCH_ALPINE) += \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts
-@@ -0,0 +1,183 @@
-+/dts-v1/;
-+
-+#include "bcm2710.dtsi"
-+#include "bcm283x-rpi-lan7515.dtsi"
-+
-+/ {
-+ compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
-+ model = "Raspberry Pi 3 Model B+";
-+
-+ chosen {
-+ bootargs = "8250.nr_uarts=1";
-+ };
-+
-+ aliases {
-+ serial0 = &uart1;
-+ serial1 = &uart0;
-+ };
-+};
-+
-+&gpio {
-+ spi0_pins: spi0_pins {
-+ brcm,pins = <9 10 11>;
-+ brcm,function = <4>; /* alt0 */
-+ };
-+
-+ spi0_cs_pins: spi0_cs_pins {
-+ brcm,pins = <8 7>;
-+ brcm,function = <1>; /* output */
-+ };
-+
-+ i2c0_pins: i2c0 {
-+ brcm,pins = <0 1>;
-+ brcm,function = <4>;
-+ };
-+
-+ i2c1_pins: i2c1 {
-+ brcm,pins = <2 3>;
-+ brcm,function = <4>;
-+ };
-+
-+ i2s_pins: i2s {
-+ brcm,pins = <18 19 20 21>;
-+ brcm,function = <4>; /* alt0 */
-+ };
-+
-+ sdio_pins: sdio_pins {
-+ brcm,pins = <34 35 36 37 38 39>;
-+ brcm,function = <7>; // alt3 = SD1
-+ brcm,pull = <0 2 2 2 2 2>;
-+ };
-+
-+ bt_pins: bt_pins {
-+ brcm,pins = <43>;
-+ brcm,function = <4>; /* alt0:GPCLK2 */
-+ brcm,pull = <0>;
-+ };
-+
-+ uart0_pins: uart0_pins {
-+ brcm,pins = <32 33>;
-+ brcm,function = <7>; /* alt3=UART0 */
-+ brcm,pull = <0 2>;
-+ };
-+
-+ uart1_pins: uart1_pins {
-+ brcm,pins;
-+ brcm,function;
-+ brcm,pull;
-+ };
-+
-+ audio_pins: audio_pins {
-+ brcm,pins = <40 41>;
-+ brcm,function = <4>;
-+ };
-+};
-+
-+&mmc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sdio_pins>;
-+ non-removable;
-+ bus-width = <4>;
-+ status = "okay";
-+ brcm,overclock-50 = <0>;
-+};
-+
-+&soc {
-+ expgpio: expgpio {
-+ compatible = "brcm,bcm2835-expgpio";
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ firmware = <&firmware>;
-+ status = "okay";
-+ };
-+};
-+
-+&uart0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins &bt_pins>;
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart1_pins>;
-+ status = "okay";
-+};
-+
-+&spi0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
-+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
-+
-+ spidev0: spidev@0{
-+ compatible = "spidev";
-+ reg = <0>; /* CE0 */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ spi-max-frequency = <125000000>;
-+ };
-+
-+ spidev1: spidev@1{
-+ compatible = "spidev";
-+ reg = <1>; /* CE1 */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ spi-max-frequency = <125000000>;
-+ };
-+};
-+
-+&i2c0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins>;
-+ clock-frequency = <100000>;
-+};
-+
-+&i2c1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c1_pins>;
-+ clock-frequency = <100000>;
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+};
-+
-+&i2s {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2s_pins>;
-+};
-+
-+&leds {
-+ act_led: act {
-+ label = "led0";
-+ linux,default-trigger = "mmc0";
-+ gpios = <&gpio 29 0>;
-+ };
-+
-+ pwr_led: pwr {
-+ label = "led1";
-+ linux,default-trigger = "default-on";
-+ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-+ };
-+};
-+
-+&hdmi {
-+ hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>;
-+};
-+
-+&audio {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&audio_pins>;
-+};
-+
-+/ {
-+ __overrides__ {
-+ act_led_gpio = <&act_led>,"gpios:4";
-+ act_led_activelow = <&act_led>,"gpios:8";
-+ act_led_trigger = <&act_led>,"linux,default-trigger";
-+
-+ pwr_led_gpio = <&pwr_led>,"gpios:4";
-+ pwr_led_activelow = <&pwr_led>,"gpios:8";
-+ pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
-@@ -0,0 +1,36 @@
-+/ {
-+ aliases {
-+ ethernet0 = &ethernet;
-+ };
-+};
-+
-+&usb {
-+ usb1@1 {
-+ compatible = "usb424,2514";
-+ reg = <1>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ usb1_1@1 {
-+ compatible = "usb424,2514";
-+ reg = <1>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ ethernet: usbether@1 {
-+ compatible = "usb424,7800";
-+ reg = <1>;
-+ microchip,eee-enabled;
-+ microchip,tx-lpi-timer = <600>; /* non-aggressive*/
-+ };
-+ };
-+ };
-+};
-+
-+
-+/ {
-+ __overrides__ {
-+ eee = <&ethernet>,"microchip,eee-enabled?";
-+ tx_lpi_timer = <&ethernet>,"microchip,tx-lpi-timer:0";
-+ };
-+};
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -89,6 +89,10 @@ Params:
- audio Set to "on" to enable the onboard ALSA audio
- interface (default "off")
-
-+ eee Enable Energy Efficient Ethernet support for
-+ compatible devices (default "on"). See also
-+ "tx_lpi_timer".
-+
- i2c_arm Set to "on" to enable the ARM's i2c interface
- (default "off")
-
-@@ -125,6 +129,10 @@ Params:
-
- sd_debug Enable debug output from SD driver (default off)
-
-+ tx_lpi_timer Set the delay in microseconds between going idle
-+ and entering the low power state (default 600).
-+ Requires EEE to be enabled - see "eee".
-+
- uart0 Set to "off" to disable uart0 (default "on")
-
- uart1 Set to "on" or "off" to enable or disable uart1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 19:06:16 +0000