1 files changed, 0 insertions, 98 deletions
diff --git a/target/linux/brcm2708/patches-4.14/950-0164-overlays-Add-EETI-EXC3000-overlay.patch b/target/linux/brcm2708/patches-4.14/950-0164-overlays-Add-EETI-EXC3000-overlay.patch
deleted file mode 100644
index 9db3667b12..0000000000
--- a/target/linux/brcm2708/patches-4.14/950-0164-overlays-Add-EETI-EXC3000-overlay.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From e141a75b9cc36a09eb8bda90b530d97a9bb1f21e Mon Sep 17 00:00:00 2001
-From: Ahmet Inan <inan@aicodix.de>
-Date: Fri, 1 Sep 2017 15:18:01 +0200
-Subject: [PATCH 164/454] overlays: Add EETI EXC3000 overlay
-
-Add support for I2C connected EETI EXC3000 multiple touch controller
-using GPIO 4 (pin 7 on GPIO header) for interrupt.
-
-Signed-off-by: Ahmet Inan <inan@aicodix.de>
----
- arch/arm/boot/dts/overlays/Makefile           |  1 +
- arch/arm/boot/dts/overlays/README             | 12 +++++
- .../arm/boot/dts/overlays/exc3000-overlay.dts | 48 +++++++++++++++++++
- 3 files changed, 61 insertions(+)
- create mode 100644 arch/arm/boot/dts/overlays/exc3000-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -26,6 +26,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
- 	dwc2.dtbo \
- 	enc28j60.dtbo \
- 	enc28j60-spi2.dtbo \
-+	exc3000.dtbo \
- 	fe-pi-audio.dtbo \
- 	goodix.dtbo \
- 	googlevoicehat-soundcard.dtbo \
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -468,6 +468,18 @@ Params: int_pin                 GPIO use
-         speed                   SPI bus speed (default 12000000)
- 
- 
-+Name:   exc3000
-+Info:   Enables I2C connected EETI EXC3000 multiple touch controller using
-+        GPIO 4 (pin 7 on GPIO header) for interrupt.
-+Load:   dtoverlay=exc3000,<param>=<val>
-+Params: interrupt               GPIO used for interrupt (default 4)
-+        sizex                   Touchscreen size x (default 4096)
-+        sizey                   Touchscreen size y (default 4096)
-+        invx                    Touchscreen inverted x axis
-+        invy                    Touchscreen inverted y axis
-+        swapxy                  Touchscreen swapped x y axis
-+
-+
- Name:   fe-pi-audio
- Info:   Configures the Fe-Pi Audio Sound Card
- Load:   dtoverlay=fe-pi-audio
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/exc3000-overlay.dts
-@@ -0,0 +1,48 @@
-+// Device tree overlay for I2C connected EETI EXC3000 multiple touch controller
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+	compatible = "brcm,bcm2708";
-+
-+	fragment@0 {
-+		target = <&gpio>;
-+		__overlay__ {
-+			exc3000_pins: exc3000_pins {
-+				brcm,pins = <4>; // interrupt
-+				brcm,function = <0>; // in
-+				brcm,pull = <2>; // pull-up
-+			};
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&i2c1>;
-+		__overlay__ {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "okay";
-+
-+			exc3000: exc3000@2a {
-+				compatible = "eeti,exc3000";
-+				reg = <0x2a>;
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&exc3000_pins>;
-+				interrupt-parent = <&gpio>;
-+				interrupts = <4 8>; // active low level-sensitive
-+				touchscreen-size-x = <4096>;
-+				touchscreen-size-y = <4096>;
-+			};
-+		};
-+	};
-+
-+	__overrides__ {
-+		interrupt = <&exc3000_pins>,"brcm,pins:0",
-+			<&exc3000>,"interrupts:0";
-+		sizex = <&exc3000>,"touchscreen-size-x:0";
-+		sizey = <&exc3000>,"touchscreen-size-y:0";
-+		invx = <&exc3000>,"touchscreen-inverted-x?";
-+		invy = <&exc3000>,"touchscreen-inverted-y?";
-+		swapxy = <&exc3000>,"touchscreen-swapped-x-y?";
-+	};
-+};