diff options
Diffstat (limited to 'target/linux/brcm2708/patches-4.14/950-0143-overlays-Add-media-center-HAT-overlay-2313.patch')
| -rw-r--r-- | target/linux/brcm2708/patches-4.14/950-0143-overlays-Add-media-center-HAT-overlay-2313.patch | 190 |
1 files changed, 0 insertions, 190 deletions
diff --git a/target/linux/brcm2708/patches-4.14/950-0143-overlays-Add-media-center-HAT-overlay-2313.patch b/target/linux/brcm2708/patches-4.14/950-0143-overlays-Add-media-center-HAT-overlay-2313.patch deleted file mode 100644 index 7c13ae3182..0000000000 --- a/target/linux/brcm2708/patches-4.14/950-0143-overlays-Add-media-center-HAT-overlay-2313.patch +++ /dev/null @@ -1,190 +0,0 @@ -From 15aa7a1d49c20f7f41b5c69cea2f46e1e976e660 Mon Sep 17 00:00:00 2001 -From: Aaron Shaw <shawaj@gmail.com> -Date: Sun, 24 Dec 2017 21:57:05 +0000 -Subject: [PATCH 143/454] overlays: Add media center HAT overlay (#2313) - ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 24 ++++ - .../dts/overlays/media-center-overlay.dts | 132 ++++++++++++++++++ - 3 files changed, 157 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/media-center-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -61,6 +61,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - mcp2515-can0.dtbo \ - mcp2515-can1.dtbo \ - mcp3008.dtbo \ -+ media-center.dtbo \ - midi-uart0.dtbo \ - midi-uart1.dtbo \ - mmc.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -994,6 +994,30 @@ Params: spi<n>-<m>-present boolean, - spi<n>-<m>-speed integer, set the spi bus speed for this device - - -+Name: media-center -+Info: Media Center HAT - 2.83" Touch Display + extras by Pi Supply -+Load: dtoverlay=media-center,<param>=<val> -+Params: speed Display SPI bus speed -+ rotate Display rotation {0,90,180,270} -+ fps Delay between frame updates -+ xohms Touchpanel sensitivity (X-plate resistance) -+ swapxy Swap x and y axis -+ gpio_out_pin GPIO for output (default "17") -+ gpio_in_pin GPIO for input (default "18") -+ gpio_in_pull Pull up/down/off on the input pin -+ (default "down") -+ sense Override the IR receive auto-detection logic: -+ "0" = force active-high -+ "1" = force active-low -+ "-1" = use auto-detection -+ (default "-1") -+ softcarrier Turn the software carrier "on" or "off" -+ (default "on") -+ invert "on" = invert the output pin (default "off") -+ debug "on" = enable additional debug messages -+ (default "off") -+ -+ - Name: midi-uart0 - Info: Configures UART0 (ttyAMA0) so that a requested 38.4kbaud actually gets - 31.25kbaud, the frequency required for MIDI ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/media-center-overlay.dts -@@ -0,0 +1,132 @@ -+/* -+ * Device Tree overlay for Media Center HAT by Pi Supply -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ -+ spidev@0{ -+ status = "disabled"; -+ }; -+ -+ spidev@1{ -+ status = "disabled"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ rpi_display_pins: rpi_display_pins { -+ brcm,pins = <12 23 24 25>; -+ brcm,function = <1 1 1 0>; /* out out out in */ -+ brcm,pull = <0 0 0 2>; /* - - - up */ -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ rpidisplay: rpi-display@0{ -+ compatible = "ilitek,ili9341"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&rpi_display_pins>; -+ -+ spi-max-frequency = <32000000>; -+ rotate = <90>; -+ bgr; -+ fps = <30>; -+ buswidth = <8>; -+ reset-gpios = <&gpio 23 0>; -+ dc-gpios = <&gpio 24 0>; -+ led-gpios = <&gpio 12 1>; -+ debug = <0>; -+ }; -+ -+ rpidisplay_ts: rpi-display-ts@1 { -+ compatible = "ti,ads7846"; -+ reg = <1>; -+ -+ spi-max-frequency = <2000000>; -+ interrupts = <25 2>; /* high-to-low edge triggered */ -+ interrupt-parent = <&gpio>; -+ pendown-gpio = <&gpio 25 0>; -+ ti,x-plate-ohms = /bits/ 16 <60>; -+ ti,pressure-max = /bits/ 16 <255>; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target-path = "/"; -+ __overlay__ { -+ lirc_rpi: lirc_rpi { -+ compatible = "rpi,lirc-rpi"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&lirc_pins>; -+ status = "okay"; -+ -+ // Override autodetection of IR receiver circuit -+ // (0 = active high, 1 = active low, -1 = no override ) -+ rpi,sense = <0xffffffff>; -+ -+ // Software carrier -+ // (0 = off, 1 = on) -+ rpi,softcarrier = <1>; -+ -+ // Invert output -+ // (0 = off, 1 = on) -+ rpi,invert = <0>; -+ -+ // Enable debugging messages -+ // (0 = off, 1 = on) -+ rpi,debug = <0>; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&gpio>; -+ __overlay__ { -+ lirc_pins: lirc_pins { -+ brcm,pins = <6 5>; -+ brcm,function = <1 0>; // out in -+ brcm,pull = <0 1>; // off down -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ speed = <&rpidisplay>,"spi-max-frequency:0"; -+ rotate = <&rpidisplay>,"rotate:0"; -+ fps = <&rpidisplay>,"fps:0"; -+ debug = <&rpidisplay>,"debug:0", -+ <&lirc_rpi>,"rpi,debug:0"; -+ xohms = <&rpidisplay_ts>,"ti,x-plate-ohms;0"; -+ swapxy = <&rpidisplay_ts>,"ti,swap-xy?"; -+ -+ gpio_out_pin = <&lirc_pins>,"brcm,pins:0"; -+ gpio_in_pin = <&lirc_pins>,"brcm,pins:4"; -+ gpio_in_pull = <&lirc_pins>,"brcm,pull:4"; -+ -+ sense = <&lirc_rpi>,"rpi,sense:0"; -+ softcarrier = <&lirc_rpi>,"rpi,softcarrier:0"; -+ invert = <&lirc_rpi>,"rpi,invert:0"; -+ }; -+}; |