aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.1/0218-BCM270X_DT-Fix-overlay-README-anomalies.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.1/0218-BCM270X_DT-Fix-overlay-README-anomalies.patch')
-rw-r--r--target/linux/brcm2708/patches-4.1/0218-BCM270X_DT-Fix-overlay-README-anomalies.patch73
1 files changed, 0 insertions, 73 deletions
diff --git a/target/linux/brcm2708/patches-4.1/0218-BCM270X_DT-Fix-overlay-README-anomalies.patch b/target/linux/brcm2708/patches-4.1/0218-BCM270X_DT-Fix-overlay-README-anomalies.patch
deleted file mode 100644
index d04a0e1b46..0000000000
--- a/target/linux/brcm2708/patches-4.1/0218-BCM270X_DT-Fix-overlay-README-anomalies.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From fd898e41ab16efaab945e7b5e65908711b8095af Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Tue, 17 Nov 2015 10:07:08 +0000
-Subject: [PATCH 218/222] BCM270X_DT: Fix overlay README anomalies
-
----
- arch/arm/boot/dts/overlays/README | 13 ++++++-------
- 1 file changed, 6 insertions(+), 7 deletions(-)
-
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -227,7 +227,7 @@ Params: gpio_pin Input p
-
- Name: gpio-poweroff
- Info: Drives a GPIO high or low on reboot
--Load: gpio-poweroff,<param>=<val>
-+Load: dtoverlay=gpio-poweroff,<param>=<val>
- Params: gpiopin GPIO for signalling (default 26)
-
- active_low Set if the power control device requires a
-@@ -302,7 +302,7 @@ Params: speed Display
-
- Name: i2c-gpio
- Info: Adds support for software i2c controller on gpio pins
--Load: dtoverlay=i2c-gpio,<param>
-+Load: dtoverlay=i2c-gpio,<param>=<val>
- Params: i2c_gpio_sda GPIO used for I2C data (default "23")
-
- i2c_gpio_scl GPIO used for I2C clock (default "24")
-@@ -313,7 +313,7 @@ Params: i2c_gpio_sda GPIO us
-
- Name: i2c-rtc
- Info: Adds support for a number of I2C Real Time Clock devices
--Load: dtoverlay=i2c-rtc,<param>
-+Load: dtoverlay=i2c-rtc,<param>=<val>
- Params: ds1307 Select the DS1307 device
-
- ds3231 Select the DS3231 device
-@@ -348,7 +348,7 @@ Params: <None>
- Name: lirc-rpi
- Info: Configures lirc-rpi (Linux Infrared Remote Control for Raspberry Pi)
- Consult the module documentation for more details.
--Load: dtoverlay=lirc-rpi,<param>=<val>,...
-+Load: dtoverlay=lirc-rpi,<param>=<val>
- Params: gpio_out_pin GPIO for output (default "17")
-
- gpio_in_pin GPIO for input (default "18")
-@@ -440,7 +440,7 @@ Params: speed Display
-
- Name: piscreen2r
- Info: PiScreen 2 with resistive TP display by OzzMaker.com
--Load: dtoverlay=piscreen,<param>=<val>
-+Load: dtoverlay=piscreen2r,<param>=<val>
- Params: speed Display SPI bus speed
-
- rotate Display rotation {0,90,180,270}
-@@ -505,7 +505,6 @@ Info: Configures a single PWM channel
- 3) So be careful mixing audio and PWM.
- 4) Currently the clock must have been enabled and configured
- by other means.
--Load: dtoverlay=pwm-2chan,<param>=<val>
- Load: dtoverlay=pwm,<param>=<val>
- Params: pin Output pin (default 18) - see table
- func Pin function (default 2 = Alt5) - see above
-@@ -708,7 +707,7 @@ Params: gpiopin GPIO fo
- Name: w1-gpio-pullup
- Info: Configures the w1-gpio Onewire interface module.
- Use this overlay if you *do* need a GPIO to drive an external pullup.
--Load: dtoverlay=w1-gpio-pullup,<param>=<val>,...
-+Load: dtoverlay=w1-gpio-pullup,<param>=<val>
- Params: gpiopin GPIO for I/O (default "4")
-
- pullup Non-zero, "on", or "y" to enable the parasitic