aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.1/0109-mailbox-Enable-BCM2835-mailbox-support.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.1/0109-mailbox-Enable-BCM2835-mailbox-support.patch')
-rw-r--r--target/linux/brcm2708/patches-4.1/0109-mailbox-Enable-BCM2835-mailbox-support.patch274
1 files changed, 274 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.1/0109-mailbox-Enable-BCM2835-mailbox-support.patch b/target/linux/brcm2708/patches-4.1/0109-mailbox-Enable-BCM2835-mailbox-support.patch
new file mode 100644
index 0000000000..15167d43b6
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.1/0109-mailbox-Enable-BCM2835-mailbox-support.patch
@@ -0,0 +1,274 @@
+From a097ef23c580bdcad619cca1deabd71eb6237984 Mon Sep 17 00:00:00 2001
+From: Lubomir Rintel <lkundrak@v3.sk>
+Date: Tue, 5 May 2015 13:27:45 -0700
+Subject: [PATCH 109/121] mailbox: Enable BCM2835 mailbox support
+
+This mailbox driver provides a single mailbox channel to write 32-bit
+values to the VPU and get a 32-bit response. The Raspberry Pi
+firmware uses this mailbox channel to implement firmware calls, while
+Roku 2 (despite being derived from the same firmware tree) doesn't.
+
+The driver was originally submitted by Lubomir, based on the
+out-of-tree 2708 mailbox driver. Eric Anholt fixed it up for
+upstreaming, with the major functional change being that it now has no
+notion of multiple channels (since that is a firmware-dependent
+concept) and instead the raspberrypi-firmware driver will do that
+bit-twiddling in its own messages.
+[Jassi: made the 'mbox_chan_ops' struct as const and removed a redundant
+variable]
+
+Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
+Signed-off-by: Craig McGeachie <slapdau@yahoo.com.au>
+Signed-off-by: Eric Anholt <eric@anholt.net>
+Acked-by: Stephen Warren <swarren@wwwdotorg.org>
+Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
+---
+ drivers/mailbox/Kconfig | 9 ++
+ drivers/mailbox/Makefile | 2 +
+ drivers/mailbox/bcm2835-mailbox.c | 216 ++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 227 insertions(+)
+ create mode 100644 drivers/mailbox/bcm2835-mailbox.c
+
+--- a/drivers/mailbox/Kconfig
++++ b/drivers/mailbox/Kconfig
+@@ -66,4 +66,13 @@ config ALTERA_MBOX
+ An implementation of the Altera Mailbox soft core. It is used
+ to send message between processors. Say Y here if you want to use the
+ Altera mailbox support.
++
++config BCM2835_MBOX
++ tristate "BCM2835 Mailbox"
++ depends on ARCH_BCM2835
++ help
++ An implementation of the BCM2385 Mailbox. It is used to invoke
++ the services of the Videocore. Say Y here if you want to use the
++ BCM2835 Mailbox.
++
+ endif
+--- a/drivers/mailbox/Makefile
++++ b/drivers/mailbox/Makefile
+@@ -13,3 +13,5 @@ obj-$(CONFIG_OMAP2PLUS_MBOX) += omap-mai
+ obj-$(CONFIG_PCC) += pcc.o
+
+ obj-$(CONFIG_ALTERA_MBOX) += mailbox-altera.o
++
++obj-$(CONFIG_BCM2835_MBOX) += bcm2835-mailbox.o
+--- /dev/null
++++ b/drivers/mailbox/bcm2835-mailbox.c
+@@ -0,0 +1,216 @@
++/*
++ * Copyright (C) 2010,2015 Broadcom
++ * Copyright (C) 2013-2014 Lubomir Rintel
++ * Copyright (C) 2013 Craig McGeachie
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This device provides a mechanism for writing to the mailboxes,
++ * that are shared between the ARM and the VideoCore processor
++ *
++ * Parts of the driver are based on:
++ * - arch/arm/mach-bcm2708/vcio.c file written by Gray Girling that was
++ * obtained from branch "rpi-3.6.y" of git://github.com/raspberrypi/
++ * linux.git
++ * - drivers/mailbox/bcm2835-ipc.c by Lubomir Rintel at
++ * https://github.com/hackerspace/rpi-linux/blob/lr-raspberry-pi/drivers/
++ * mailbox/bcm2835-ipc.c
++ * - documentation available on the following web site:
++ * https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface
++ */
++
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/err.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/kernel.h>
++#include <linux/mailbox_controller.h>
++#include <linux/module.h>
++#include <linux/of_address.h>
++#include <linux/of_irq.h>
++#include <linux/platform_device.h>
++#include <linux/spinlock.h>
++
++/* Mailboxes */
++#define ARM_0_MAIL0 0x00
++#define ARM_0_MAIL1 0x20
++
++/*
++ * Mailbox registers. We basically only support mailbox 0 & 1. We
++ * deliver to the VC in mailbox 1, it delivers to us in mailbox 0. See
++ * BCM2835-ARM-Peripherals.pdf section 1.3 for an explanation about
++ * the placement of memory barriers.
++ */
++#define MAIL0_RD (ARM_0_MAIL0 + 0x00)
++#define MAIL0_POL (ARM_0_MAIL0 + 0x10)
++#define MAIL0_STA (ARM_0_MAIL0 + 0x18)
++#define MAIL0_CNF (ARM_0_MAIL0 + 0x1C)
++#define MAIL1_WRT (ARM_0_MAIL1 + 0x00)
++
++/* Status register: FIFO state. */
++#define ARM_MS_FULL BIT(31)
++#define ARM_MS_EMPTY BIT(30)
++
++/* Configuration register: Enable interrupts. */
++#define ARM_MC_IHAVEDATAIRQEN BIT(0)
++
++struct bcm2835_mbox {
++ void __iomem *regs;
++ spinlock_t lock;
++ struct mbox_controller controller;
++};
++
++static struct bcm2835_mbox *bcm2835_link_mbox(struct mbox_chan *link)
++{
++ return container_of(link->mbox, struct bcm2835_mbox, controller);
++}
++
++static irqreturn_t bcm2835_mbox_irq(int irq, void *dev_id)
++{
++ struct bcm2835_mbox *mbox = dev_id;
++ struct device *dev = mbox->controller.dev;
++ struct mbox_chan *link = &mbox->controller.chans[0];
++
++ while (!(readl(mbox->regs + MAIL0_STA) & ARM_MS_EMPTY)) {
++ u32 msg = readl(mbox->regs + MAIL0_RD);
++ dev_dbg(dev, "Reply 0x%08X\n", msg);
++ mbox_chan_received_data(link, &msg);
++ }
++ return IRQ_HANDLED;
++}
++
++static int bcm2835_send_data(struct mbox_chan *link, void *data)
++{
++ struct bcm2835_mbox *mbox = bcm2835_link_mbox(link);
++ u32 msg = *(u32 *)data;
++
++ spin_lock(&mbox->lock);
++ writel(msg, mbox->regs + MAIL1_WRT);
++ dev_dbg(mbox->controller.dev, "Request 0x%08X\n", msg);
++ spin_unlock(&mbox->lock);
++ return 0;
++}
++
++static int bcm2835_startup(struct mbox_chan *link)
++{
++ struct bcm2835_mbox *mbox = bcm2835_link_mbox(link);
++
++ /* Enable the interrupt on data reception */
++ writel(ARM_MC_IHAVEDATAIRQEN, mbox->regs + MAIL0_CNF);
++
++ return 0;
++}
++
++static void bcm2835_shutdown(struct mbox_chan *link)
++{
++ struct bcm2835_mbox *mbox = bcm2835_link_mbox(link);
++
++ writel(0, mbox->regs + MAIL0_CNF);
++}
++
++static bool bcm2835_last_tx_done(struct mbox_chan *link)
++{
++ struct bcm2835_mbox *mbox = bcm2835_link_mbox(link);
++ bool ret;
++
++ spin_lock(&mbox->lock);
++ ret = !(readl(mbox->regs + MAIL0_STA) & ARM_MS_FULL);
++ spin_unlock(&mbox->lock);
++ return ret;
++}
++
++static const struct mbox_chan_ops bcm2835_mbox_chan_ops = {
++ .send_data = bcm2835_send_data,
++ .startup = bcm2835_startup,
++ .shutdown = bcm2835_shutdown,
++ .last_tx_done = bcm2835_last_tx_done
++};
++
++static struct mbox_chan *bcm2835_mbox_index_xlate(struct mbox_controller *mbox,
++ const struct of_phandle_args *sp)
++{
++ if (sp->args_count != 0)
++ return NULL;
++
++ return &mbox->chans[0];
++}
++
++static int bcm2835_mbox_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ int ret = 0;
++ struct resource *iomem;
++ struct bcm2835_mbox *mbox;
++
++ mbox = devm_kzalloc(dev, sizeof(*mbox), GFP_KERNEL);
++ if (mbox == NULL)
++ return -ENOMEM;
++ spin_lock_init(&mbox->lock);
++
++ ret = devm_request_irq(dev, irq_of_parse_and_map(dev->of_node, 0),
++ bcm2835_mbox_irq, 0, dev_name(dev), mbox);
++ if (ret) {
++ dev_err(dev, "Failed to register a mailbox IRQ handler: %d\n",
++ ret);
++ return -ENODEV;
++ }
++
++ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ mbox->regs = devm_ioremap_resource(&pdev->dev, iomem);
++ if (IS_ERR(mbox->regs)) {
++ ret = PTR_ERR(mbox->regs);
++ dev_err(&pdev->dev, "Failed to remap mailbox regs: %d\n", ret);
++ return ret;
++ }
++
++ mbox->controller.txdone_poll = true;
++ mbox->controller.txpoll_period = 5;
++ mbox->controller.ops = &bcm2835_mbox_chan_ops;
++ mbox->controller.of_xlate = &bcm2835_mbox_index_xlate;
++ mbox->controller.dev = dev;
++ mbox->controller.num_chans = 1;
++ mbox->controller.chans = devm_kzalloc(dev,
++ sizeof(*mbox->controller.chans), GFP_KERNEL);
++ if (!mbox->controller.chans)
++ return -ENOMEM;
++
++ ret = mbox_controller_register(&mbox->controller);
++ if (ret)
++ return ret;
++
++ platform_set_drvdata(pdev, mbox);
++ dev_info(dev, "mailbox enabled\n");
++
++ return ret;
++}
++
++static int bcm2835_mbox_remove(struct platform_device *pdev)
++{
++ struct bcm2835_mbox *mbox = platform_get_drvdata(pdev);
++ mbox_controller_unregister(&mbox->controller);
++ return 0;
++}
++
++static const struct of_device_id bcm2835_mbox_of_match[] = {
++ { .compatible = "brcm,bcm2835-mbox", },
++ {},
++};
++MODULE_DEVICE_TABLE(of, bcm2835_mbox_of_match);
++
++static struct platform_driver bcm2835_mbox_driver = {
++ .driver = {
++ .name = "bcm2835-mbox",
++ .owner = THIS_MODULE,
++ .of_match_table = bcm2835_mbox_of_match,
++ },
++ .probe = bcm2835_mbox_probe,
++ .remove = bcm2835_mbox_remove,
++};
++module_platform_driver(bcm2835_mbox_driver);
++
++MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
++MODULE_DESCRIPTION("BCM2835 mailbox IPC driver");
++MODULE_LICENSE("GPL v2");