aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.1/0107-BCM270X_DT-Overlay-for-the-Fen-Logic-VGA666-board.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.1/0107-BCM270X_DT-Overlay-for-the-Fen-Logic-VGA666-board.patch')
-rw-r--r--target/linux/brcm2708/patches-4.1/0107-BCM270X_DT-Overlay-for-the-Fen-Logic-VGA666-board.patch77
1 files changed, 0 insertions, 77 deletions
diff --git a/target/linux/brcm2708/patches-4.1/0107-BCM270X_DT-Overlay-for-the-Fen-Logic-VGA666-board.patch b/target/linux/brcm2708/patches-4.1/0107-BCM270X_DT-Overlay-for-the-Fen-Logic-VGA666-board.patch
deleted file mode 100644
index febf6ddb79..0000000000
--- a/target/linux/brcm2708/patches-4.1/0107-BCM270X_DT-Overlay-for-the-Fen-Logic-VGA666-board.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 79373224e554f12a3094e0945bb107a3b1c3b275 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Tue, 30 Jun 2015 09:10:36 +0100
-Subject: [PATCH 107/222] BCM270X_DT: Overlay for the Fen Logic VGA666 board
-
-The VGA666 board requires GPIOs 2-21 (so no I2C or UART). Using the
-overlay (instead of a custom dt-blob.bin) has the advantage that it will
-reserve those pins and stop other devices using them (except for GPIO),
-but it does delay the point at which the output becomes valid until 2-3
-seconds after the kernel has started.
----
- arch/arm/boot/dts/overlays/Makefile | 1 +
- arch/arm/boot/dts/overlays/README | 8 +++++++
- arch/arm/boot/dts/overlays/vga666-overlay.dts | 30 +++++++++++++++++++++++++++
- 3 files changed, 39 insertions(+)
- create mode 100644 arch/arm/boot/dts/overlays/vga666-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -43,6 +43,7 @@ dtb-$(RPI_DT_OVERLAYS) += spi-bcm2708-ov
- dtb-$(RPI_DT_OVERLAYS) += spi-bcm2835-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += tinylcd35-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += uart1-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += vga666-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += w1-gpio-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += w1-gpio-pullup-overlay.dtb
-
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -497,6 +497,14 @@ Params: txd1_pin GPIO pi
- rxd1_pin GPIO pin for RXD1 (15, 33 or 41 - default 15)
-
-
-+Name: vga666
-+Info: Overlay for the Fen Logic VGA666 board
-+ This uses GPIOs 2-21 (so no I2C), and activates the output 2-3 seconds
-+ after the kernel has started.
-+Load: dtoverlay=vga666
-+Params: <None>
-+
-+
- Name: w1-gpio
- Info: Configures the w1-gpio Onewire interface module.
- Use this overlay if you *don't* need a GPIO to drive an external pullup.
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/vga666-overlay.dts
-@@ -0,0 +1,30 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+ compatible = "brcm,bcm2708";
-+
-+ // There is no VGA driver module, but we need a platform device
-+ // node (that doesn't already use pinctrl) to hang the pinctrl
-+ // reference on - leds will do
-+
-+ fragment@0 {
-+ target = <&leds>;
-+ __overlay__ {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&vga666_pins>;
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ vga666_pins: vga666_pins {
-+ brcm,pins = <2 3 4 5 6 7 8 9 10 11 12
-+ 13 14 15 16 17 18 19 20 21>;
-+ brcm,function = <6>; /* alt2 */
-+ brcm,pull = <0>; /* no pull */
-+ };
-+ };
-+ };
-+};