aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.1/0087-gpio-poweroff-Allow-it-to-work-on-Raspberry-Pi.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.1/0087-gpio-poweroff-Allow-it-to-work-on-Raspberry-Pi.patch')
-rw-r--r--target/linux/brcm2708/patches-4.1/0087-gpio-poweroff-Allow-it-to-work-on-Raspberry-Pi.patch108
1 files changed, 0 insertions, 108 deletions
diff --git a/target/linux/brcm2708/patches-4.1/0087-gpio-poweroff-Allow-it-to-work-on-Raspberry-Pi.patch b/target/linux/brcm2708/patches-4.1/0087-gpio-poweroff-Allow-it-to-work-on-Raspberry-Pi.patch
deleted file mode 100644
index e7c733fa53..0000000000
--- a/target/linux/brcm2708/patches-4.1/0087-gpio-poweroff-Allow-it-to-work-on-Raspberry-Pi.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From d600a3f1ffc633465794c3519f2eb4aa536a9dde Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Thu, 25 Jun 2015 12:16:11 +0100
-Subject: [PATCH 087/222] gpio-poweroff: Allow it to work on Raspberry Pi
-
-The Raspberry Pi firmware manages the power-down and reboot
-process. To do this it installs a pm_power_off handler, causing
-the gpio-poweroff module to abort the probe function.
-
-This patch introduces a "force" DT property that overrides that
-behaviour, and also adds a DT overlay to enable and control it.
-
-Note that running in an active-low configuration (DT parameter
-"active_low") requires a custom dt-blob.bin and probably won't
-allow a reboot without switching off, so an external inversion
-of the trigger signal may be preferable.
----
- arch/arm/boot/dts/overlays/Makefile | 1 +
- arch/arm/boot/dts/overlays/README | 13 +++++++++
- .../boot/dts/overlays/gpio-poweroff-overlay.dts | 34 ++++++++++++++++++++++
- drivers/power/reset/gpio-poweroff.c | 4 ++-
- 4 files changed, 51 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -16,6 +16,7 @@ dtb-$(RPI_DT_OVERLAYS) += ads7846-overla
- dtb-$(RPI_DT_OVERLAYS) += bmp085_i2c-sensor-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += dht11-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += enc28j60-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += gpio-poweroff-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += hifiberry-amp-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += hifiberry-dac-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += hifiberry-dacplus-overlay.dtb
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -192,6 +192,19 @@ Params: int_pin GPIO us
- speed SPI bus speed (default 12000000)
-
-
-+Name: gpio-poweroff
-+Info: Drives a GPIO high or low on reboot
-+Load: gpio-poweroff,<param>=<val>
-+Params: gpiopin GPIO for signalling (default 26)
-+
-+ active_low Set if the power control device requires a
-+ high->low transition to trigger a power-down.
-+ Note that this will require the support of a
-+ custom dt-blob.bin to prevent a power-down
-+ during the boot process, and that a reboot
-+ will also cause the pin to go low.
-+
-+
- Name: hifiberry-amp
- Info: Configures the HifiBerry Amp and Amp+ audio cards
- Load: dtoverlay=hifiberry-amp
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts
-@@ -0,0 +1,34 @@
-+// Definitions for gpio-poweroff module
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target-path = "/";
-+ __overlay__ {
-+ power_ctrl: power_ctrl {
-+ compatible = "gpio-poweroff";
-+ gpios = <&gpio 26 0>;
-+ force;
-+ };
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ power_ctrl_pins: power_ctrl_pins {
-+ brcm,pins = <26>;
-+ brcm,function = <1>; // out
-+ };
-+ };
-+ };
-+
-+ __overrides__ {
-+ gpiopin = <&power_ctrl>,"gpios:4",
-+ <&power_ctrl_pins>,"brcm,pins:0";
-+ active_low = <&power_ctrl>,"gpios:8";
-+ };
-+};
---- a/drivers/power/reset/gpio-poweroff.c
-+++ b/drivers/power/reset/gpio-poweroff.c
-@@ -48,9 +48,11 @@ static void gpio_poweroff_do_poweroff(vo
- static int gpio_poweroff_probe(struct platform_device *pdev)
- {
- bool input = false;
-+ bool force = false;
-
- /* If a pm_power_off function has already been added, leave it alone */
-- if (pm_power_off != NULL) {
-+ force = of_property_read_bool(pdev->dev.of_node, "force");
-+ if (!force && (pm_power_off != NULL)) {
- dev_err(&pdev->dev,
- "%s: pm_power_off function already registered",
- __func__);