aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.1/0048-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.1/0048-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch')
-rw-r--r--target/linux/brcm2708/patches-4.1/0048-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch852
1 files changed, 0 insertions, 852 deletions
diff --git a/target/linux/brcm2708/patches-4.1/0048-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch b/target/linux/brcm2708/patches-4.1/0048-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch
deleted file mode 100644
index 1c86fda48f..0000000000
--- a/target/linux/brcm2708/patches-4.1/0048-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch
+++ /dev/null
@@ -1,852 +0,0 @@
-From 32145a877f6e116d9bdc780558374782c5b7a4ef Mon Sep 17 00:00:00 2001
-From: Daniel Matuschek <info@crazy-audio.com>
-Date: Mon, 4 Aug 2014 11:09:58 +0200
-Subject: [PATCH 048/222] Added driver for HiFiBerry Amp amplifier add-on board
-
-The driver contains a low-level hardware driver for the TAS5713 and the
-drivers for the Raspberry Pi I2S subsystem.
-
-TAS5713: return error if initialisation fails
-
-Existing TAS5713 driver logs errors during initialisation, but does not return
-an error code. Therefore even if initialisation fails, the driver will still be
-loaded, but won't work. This patch fixes this. I2C communication error will now
-reported correctly by a non-zero return code.
-
-HiFiBerry Amp: fix device-tree problems
-
-Some code to load the driver based on device-tree-overlays was missing. This is added by this patch.
----
- arch/arm/mach-bcm2708/bcm2708.c | 19 +++
- sound/soc/bcm/Kconfig | 7 +
- sound/soc/bcm/Makefile | 2 +
- sound/soc/bcm/hifiberry_amp.c | 127 ++++++++++++++
- sound/soc/codecs/Kconfig | 4 +
- sound/soc/codecs/Makefile | 2 +
- sound/soc/codecs/tas5713.c | 369 ++++++++++++++++++++++++++++++++++++++++
- sound/soc/codecs/tas5713.h | 210 +++++++++++++++++++++++
- 8 files changed, 740 insertions(+)
- create mode 100644 sound/soc/bcm/hifiberry_amp.c
- create mode 100644 sound/soc/codecs/tas5713.c
- create mode 100644 sound/soc/codecs/tas5713.h
-
---- a/arch/arm/mach-bcm2708/bcm2708.c
-+++ b/arch/arm/mach-bcm2708/bcm2708.c
-@@ -681,6 +681,20 @@ static struct i2c_board_info __initdata
-
- #endif
-
-+#if defined(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) || defined(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP_MODULE)
-+static struct platform_device snd_hifiberry_amp_device = {
-+ .name = "snd-hifiberry-amp",
-+ .id = 0,
-+ .num_resources = 0,
-+};
-+
-+static struct i2c_board_info __initdata snd_tas5713_i2c_devices[] = {
-+ {
-+ I2C_BOARD_INFO("tas5713", 0x1b)
-+ },
-+};
-+#endif
-+
- #if defined(CONFIG_SND_BCM2708_SOC_RPI_DAC) || defined(CONFIG_SND_BCM2708_SOC_RPI_DAC_MODULE)
- static struct platform_device snd_rpi_dac_device = {
- .name = "snd-rpi-dac",
-@@ -894,6 +908,11 @@ void __init bcm2708_init(void)
- i2c_register_board_info_dt(1, snd_wm8804_i2c_devices, ARRAY_SIZE(snd_wm8804_i2c_devices));
- #endif
-
-+#if defined(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) || defined(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP_MODULE)
-+ bcm_register_device_dt(&snd_hifiberry_amp_device);
-+ i2c_register_board_info_dt(1, snd_tas5713_i2c_devices, ARRAY_SIZE(snd_tas5713_i2c_devices));
-+#endif
-+
- #if defined(CONFIG_SND_BCM2708_SOC_RPI_DAC) || defined(CONFIG_SND_BCM2708_SOC_RPI_DAC_MODULE)
- bcm_register_device_dt(&snd_rpi_dac_device);
- bcm_register_device_dt(&snd_pcm1794a_codec_device);
---- a/sound/soc/bcm/Kconfig
-+++ b/sound/soc/bcm/Kconfig
-@@ -40,6 +40,13 @@ config SND_BCM2708_SOC_HIFIBERRY_DIGI
- help
- Say Y or M if you want to add support for HifiBerry Digi S/PDIF output board.
-
-+config SND_BCM2708_SOC_HIFIBERRY_AMP
-+ tristate "Support for the HifiBerry Amp"
-+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
-+ select SND_SOC_TAS5713
-+ help
-+ Say Y or M if you want to add support for the HifiBerry Amp amplifier board.
-+
- config SND_BCM2708_SOC_RPI_DAC
- tristate "Support for RPi-DAC"
- depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
---- a/sound/soc/bcm/Makefile
-+++ b/sound/soc/bcm/Makefile
-@@ -12,11 +12,13 @@ obj-$(CONFIG_SND_BCM2708_SOC_I2S) += snd
- snd-soc-hifiberry-dac-objs := hifiberry_dac.o
- snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o
- snd-soc-hifiberry-digi-objs := hifiberry_digi.o
-+snd-soc-hifiberry-amp-objs := hifiberry_amp.o
- snd-soc-rpi-dac-objs := rpi-dac.o
- snd-soc-iqaudio-dac-objs := iqaudio-dac.o
-
- obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o
- obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o
- obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o
-+obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o
- obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o
- obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o
---- /dev/null
-+++ b/sound/soc/bcm/hifiberry_amp.c
-@@ -0,0 +1,127 @@
-+/*
-+ * ASoC Driver for HifiBerry AMP
-+ *
-+ * Author: Sebastian Eickhoff <basti.eickhoff@googlemail.com>
-+ * Copyright 2014
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/pcm_params.h>
-+#include <sound/soc.h>
-+#include <sound/jack.h>
-+
-+static int snd_rpi_hifiberry_amp_init(struct snd_soc_pcm_runtime *rtd)
-+{
-+ // ToDo: init of the dsp-registers.
-+ return 0;
-+}
-+
-+static int snd_rpi_hifiberry_amp_hw_params( struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *params )
-+{
-+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-+
-+ return snd_soc_dai_set_bclk_ratio(cpu_dai, 64);
-+}
-+
-+static struct snd_soc_ops snd_rpi_hifiberry_amp_ops = {
-+ .hw_params = snd_rpi_hifiberry_amp_hw_params,
-+};
-+
-+static struct snd_soc_dai_link snd_rpi_hifiberry_amp_dai[] = {
-+ {
-+ .name = "HifiBerry AMP",
-+ .stream_name = "HifiBerry AMP HiFi",
-+ .cpu_dai_name = "bcm2708-i2s.0",
-+ .codec_dai_name = "tas5713-hifi",
-+ .platform_name = "bcm2708-i2s.0",
-+ .codec_name = "tas5713.1-001b",
-+ .dai_fmt = SND_SOC_DAIFMT_I2S |
-+ SND_SOC_DAIFMT_NB_NF |
-+ SND_SOC_DAIFMT_CBS_CFS,
-+ .ops = &snd_rpi_hifiberry_amp_ops,
-+ .init = snd_rpi_hifiberry_amp_init,
-+ },
-+};
-+
-+
-+static struct snd_soc_card snd_rpi_hifiberry_amp = {
-+ .name = "snd_rpi_hifiberry_amp",
-+ .dai_link = snd_rpi_hifiberry_amp_dai,
-+ .num_links = ARRAY_SIZE(snd_rpi_hifiberry_amp_dai),
-+};
-+
-+static const struct of_device_id snd_rpi_hifiberry_amp_of_match[] = {
-+ { .compatible = "hifiberry,hifiberry-amp", },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, snd_rpi_hifiberry_amp_of_match);
-+
-+
-+static int snd_rpi_hifiberry_amp_probe(struct platform_device *pdev)
-+{
-+ int ret = 0;
-+
-+ snd_rpi_hifiberry_amp.dev = &pdev->dev;
-+
-+ if (pdev->dev.of_node) {
-+ struct device_node *i2s_node;
-+ struct snd_soc_dai_link *dai = &snd_rpi_hifiberry_amp_dai[0];
-+ i2s_node = of_parse_phandle(pdev->dev.of_node,
-+ "i2s-controller", 0);
-+
-+ if (i2s_node) {
-+ dai->cpu_dai_name = NULL;
-+ dai->cpu_of_node = i2s_node;
-+ dai->platform_name = NULL;
-+ dai->platform_of_node = i2s_node;
-+ }
-+ }
-+
-+ ret = snd_soc_register_card(&snd_rpi_hifiberry_amp);
-+
-+ if (ret != 0) {
-+ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret);
-+ }
-+
-+ return ret;
-+}
-+
-+
-+static int snd_rpi_hifiberry_amp_remove(struct platform_device *pdev)
-+{
-+ return snd_soc_unregister_card(&snd_rpi_hifiberry_amp);
-+}
-+
-+
-+static struct platform_driver snd_rpi_hifiberry_amp_driver = {
-+ .driver = {
-+ .name = "snd-hifiberry-amp",
-+ .owner = THIS_MODULE,
-+ .of_match_table = snd_rpi_hifiberry_amp_of_match,
-+ },
-+ .probe = snd_rpi_hifiberry_amp_probe,
-+ .remove = snd_rpi_hifiberry_amp_remove,
-+};
-+
-+
-+module_platform_driver(snd_rpi_hifiberry_amp_driver);
-+
-+
-+MODULE_AUTHOR("Sebastian Eickhoff <basti.eickhoff@googlemail.com>");
-+MODULE_DESCRIPTION("ASoC driver for HiFiBerry-AMP");
-+MODULE_LICENSE("GPL v2");
---- a/sound/soc/codecs/Kconfig
-+++ b/sound/soc/codecs/Kconfig
-@@ -109,6 +109,7 @@ config SND_SOC_ALL_CODECS
- select SND_SOC_TFA9879 if I2C
- select SND_SOC_TLV320AIC23_I2C if I2C
- select SND_SOC_TLV320AIC23_SPI if SPI_MASTER
-+ select SND_SOC_TAS5713 if I2C
- select SND_SOC_TLV320AIC26 if SPI_MASTER
- select SND_SOC_TLV320AIC31XX if I2C
- select SND_SOC_TLV320AIC32X4 if I2C
-@@ -623,6 +624,9 @@ config SND_SOC_TFA9879
- tristate "NXP Semiconductors TFA9879 amplifier"
- depends on I2C
-
-+config SND_SOC_TAS5713
-+ tristate
-+
- config SND_SOC_TLV320AIC23
- tristate
-
---- a/sound/soc/codecs/Makefile
-+++ b/sound/soc/codecs/Makefile
-@@ -109,6 +109,7 @@ snd-soc-sta529-objs := sta529.o
- snd-soc-stac9766-objs := stac9766.o
- snd-soc-tas5086-objs := tas5086.o
- snd-soc-tfa9879-objs := tfa9879.o
-+snd-soc-tas5713-objs := tas5713.o
- snd-soc-tlv320aic23-objs := tlv320aic23.o
- snd-soc-tlv320aic23-i2c-objs := tlv320aic23-i2c.o
- snd-soc-tlv320aic23-spi-objs := tlv320aic23-spi.o
-@@ -293,6 +294,7 @@ obj-$(CONFIG_SND_SOC_STAC9766) += snd-so
- obj-$(CONFIG_SND_SOC_TAS2552) += snd-soc-tas2552.o
- obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o
- obj-$(CONFIG_SND_SOC_TFA9879) += snd-soc-tfa9879.o
-+obj-$(CONFIG_SND_SOC_TAS5713) += snd-soc-tas5713.o
- obj-$(CONFIG_SND_SOC_TLV320AIC23) += snd-soc-tlv320aic23.o
- obj-$(CONFIG_SND_SOC_TLV320AIC23_I2C) += snd-soc-tlv320aic23-i2c.o
- obj-$(CONFIG_SND_SOC_TLV320AIC23_SPI) += snd-soc-tlv320aic23-spi.o
---- /dev/null
-+++ b/sound/soc/codecs/tas5713.c
-@@ -0,0 +1,369 @@
-+/*
-+ * ASoC Driver for TAS5713
-+ *
-+ * Author: Sebastian Eickhoff <basti.eickhoff@googlemail.com>
-+ * Copyright 2014
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/pm.h>
-+#include <linux/i2c.h>
-+#include <linux/of_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/regmap.h>
-+#include <linux/regulator/consumer.h>
-+#include <linux/slab.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/pcm_params.h>
-+#include <sound/soc.h>
-+#include <sound/initval.h>
-+#include <sound/tlv.h>
-+
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/fs.h>
-+#include <asm/uaccess.h>
-+
-+#include "tas5713.h"
-+
-+
-+static struct i2c_client *i2c;
-+
-+struct tas5713_priv {
-+ struct regmap *regmap;
-+ int mclk_div;
-+ struct snd_soc_codec *codec;
-+};
-+
-+static struct tas5713_priv *priv_data;
-+
-+
-+
-+
-+/*
-+ * _ _ ___ _ ___ _ _
-+ * /_\ | | / __| /_\ / __|___ _ _| |_ _ _ ___| |___
-+ * / _ \| |__\__ \/ _ \ | (__/ _ \ ' \ _| '_/ _ \ (_-<
-+ * /_/ \_\____|___/_/ \_\ \___\___/_||_\__|_| \___/_/__/
-+ *
-+ */
-+
-+static const DECLARE_TLV_DB_SCALE(tas5713_vol_tlv, -10000, 50, 1);
-+
-+
-+static const struct snd_kcontrol_new tas5713_snd_controls[] = {
-+ SOC_SINGLE_TLV ("Master" , TAS5713_VOL_MASTER, 0, 248, 1, tas5713_vol_tlv),
-+ SOC_DOUBLE_R_TLV("Channels" , TAS5713_VOL_CH1, TAS5713_VOL_CH2, 0, 248, 1, tas5713_vol_tlv)
-+};
-+
-+
-+
-+
-+/*
-+ * __ __ _ _ ___ _
-+ * | \/ |__ _ __| |_ (_)_ _ ___ | \ _ _(_)_ _____ _ _
-+ * | |\/| / _` / _| ' \| | ' \/ -_) | |) | '_| \ V / -_) '_|
-+ * |_| |_\__,_\__|_||_|_|_||_\___| |___/|_| |_|\_/\___|_|
-+ *
-+ */
-+
-+static int tas5713_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *params,
-+ struct snd_soc_dai *dai)
-+{
-+ u16 blen = 0x00;
-+
-+ struct snd_soc_codec *codec;
-+ codec = dai->codec;
-+ priv_data->codec = dai->codec;
-+
-+ switch (params_format(params)) {
-+ case SNDRV_PCM_FORMAT_S16_LE:
-+ blen = 0x03;
-+ break;
-+ case SNDRV_PCM_FORMAT_S20_3LE:
-+ blen = 0x1;
-+ break;
-+ case SNDRV_PCM_FORMAT_S24_LE:
-+ blen = 0x04;
-+ break;
-+ case SNDRV_PCM_FORMAT_S32_LE:
-+ blen = 0x05;
-+ break;
-+ default:
-+ dev_err(dai->dev, "Unsupported word length: %u\n",
-+ params_format(params));
-+ return -EINVAL;
-+ }
-+
-+ // set word length
-+ snd_soc_update_bits(codec, TAS5713_SERIAL_DATA_INTERFACE, 0x7, blen);
-+
-+ return 0;
-+}
-+
-+
-+static int tas5713_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
-+{
-+ unsigned int val = 0;
-+
-+ struct tas5713_priv *tas5713;
-+ struct snd_soc_codec *codec = dai->codec;
-+ tas5713 = snd_soc_codec_get_drvdata(codec);
-+
-+ if (mute) {
-+ val = TAS5713_SOFT_MUTE_ALL;
-+ }
-+
-+ return regmap_write(tas5713->regmap, TAS5713_SOFT_MUTE, val);
-+}
-+
-+
-+static const struct snd_soc_dai_ops tas5713_dai_ops = {
-+ .hw_params = tas5713_hw_params,
-+ .mute_stream = tas5713_mute_stream,
-+};
-+
-+
-+static struct snd_soc_dai_driver tas5713_dai = {
-+ .name = "tas5713-hifi",
-+ .playback = {
-+ .stream_name = "Playback",
-+ .channels_min = 2,
-+ .channels_max = 2,
-+ .rates = SNDRV_PCM_RATE_8000_48000,
-+ .formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE ),
-+ },
-+ .ops = &tas5713_dai_ops,
-+};
-+
-+
-+
-+
-+/*
-+ * ___ _ ___ _
-+ * / __|___ __| |___ __ | \ _ _(_)_ _____ _ _
-+ * | (__/ _ \/ _` / -_) _| | |) | '_| \ V / -_) '_|
-+ * \___\___/\__,_\___\__| |___/|_| |_|\_/\___|_|
-+ *
-+ */
-+
-+static int tas5713_remove(struct snd_soc_codec *codec)
-+{
-+ struct tas5713_priv *tas5713;
-+
-+ tas5713 = snd_soc_codec_get_drvdata(codec);
-+
-+ return 0;
-+}
-+
-+
-+static int tas5713_probe(struct snd_soc_codec *codec)
-+{
-+ struct tas5713_priv *tas5713;
-+ int i, ret;
-+
-+ i2c = container_of(codec->dev, struct i2c_client, dev);
-+
-+ tas5713 = snd_soc_codec_get_drvdata(codec);
-+
-+ // Reset error
-+ ret = snd_soc_write(codec, TAS5713_ERROR_STATUS, 0x00);
-+ if (ret < 0) return ret;
-+
-+ // Trim oscillator
-+ ret = snd_soc_write(codec, TAS5713_OSC_TRIM, 0x00);
-+ if (ret < 0) return ret;
-+ msleep(1000);
-+
-+ // Reset error
-+ ret = snd_soc_write(codec, TAS5713_ERROR_STATUS, 0x00);
-+ if (ret < 0) return ret;
-+
-+ // Clock mode: 44/48kHz, MCLK=64xfs
-+ ret = snd_soc_write(codec, TAS5713_CLOCK_CTRL, 0x60);
-+ if (ret < 0) return ret;
-+
-+ // I2S 24bit
-+ ret = snd_soc_write(codec, TAS5713_SERIAL_DATA_INTERFACE, 0x05);
-+ if (ret < 0) return ret;
-+
-+ // Unmute
-+ ret = snd_soc_write(codec, TAS5713_SYSTEM_CTRL2, 0x00);
-+ if (ret < 0) return ret;
-+ ret = snd_soc_write(codec, TAS5713_SOFT_MUTE, 0x00);
-+ if (ret < 0) return ret;
-+
-+ // Set volume to 0db
-+ ret = snd_soc_write(codec, TAS5713_VOL_MASTER, 0x00);
-+ if (ret < 0) return ret;
-+
-+ // Now start programming the default initialization sequence
-+ for (i = 0; i < ARRAY_SIZE(tas5713_init_sequence); ++i) {
-+ ret = i2c_master_send(i2c,
-+ tas5713_init_sequence[i].data,
-+ tas5713_init_sequence[i].size);
-+ if (ret < 0) {
-+ printk(KERN_INFO "TAS5713 CODEC PROBE: InitSeq returns: %d\n", ret);
-+ }
-+ }
-+
-+ // Unmute
-+ ret = snd_soc_write(codec, TAS5713_SYSTEM_CTRL2, 0x00);
-+ if (ret < 0) return ret;
-+
-+ return 0;
-+}
-+
-+
-+static struct snd_soc_codec_driver soc_codec_dev_tas5713 = {
-+ .probe = tas5713_probe,
-+ .remove = tas5713_remove,
-+ .controls = tas5713_snd_controls,
-+ .num_controls = ARRAY_SIZE(tas5713_snd_controls),
-+};
-+
-+
-+
-+
-+/*
-+ * ___ ___ ___ ___ _
-+ * |_ _|_ ) __| | \ _ _(_)_ _____ _ _
-+ * | | / / (__ | |) | '_| \ V / -_) '_|
-+ * |___/___\___| |___/|_| |_|\_/\___|_|
-+ *
-+ */
-+
-+static const struct reg_default tas5713_reg_defaults[] = {
-+ { 0x07 ,0x80 }, // R7 - VOL_MASTER - -40dB
-+ { 0x08 , 30 }, // R8 - VOL_CH1 - 0dB
-+ { 0x09 , 30 }, // R9 - VOL_CH2 - 0dB
-+ { 0x0A ,0x80 }, // R10 - VOL_HEADPHONE - -40dB
-+};
-+
-+
-+static bool tas5713_reg_volatile(struct device *dev, unsigned int reg)
-+{
-+ switch (reg) {
-+ case TAS5713_DEVICE_ID:
-+ case TAS5713_ERROR_STATUS:
-+ return true;
-+ default:
-+ return false;
-+ }
-+}
-+
-+
-+static const struct of_device_id tas5713_of_match[] = {
-+ { .compatible = "ti,tas5713", },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(of, tas5713_of_match);
-+
-+
-+static struct regmap_config tas5713_regmap_config = {
-+ .reg_bits = 8,
-+ .val_bits = 8,
-+
-+ .max_register = TAS5713_MAX_REGISTER,
-+ .volatile_reg = tas5713_reg_volatile,
-+
-+ .cache_type = REGCACHE_RBTREE,
-+ .reg_defaults = tas5713_reg_defaults,
-+ .num_reg_defaults = ARRAY_SIZE(tas5713_reg_defaults),
-+};
-+
-+
-+static int tas5713_i2c_probe(struct i2c_client *i2c,
-+ const struct i2c_device_id *id)
-+{
-+ int ret;
-+
-+ priv_data = devm_kzalloc(&i2c->dev, sizeof *priv_data, GFP_KERNEL);
-+ if (!priv_data)
-+ return -ENOMEM;
-+
-+ priv_data->regmap = devm_regmap_init_i2c(i2c, &tas5713_regmap_config);
-+ if (IS_ERR(priv_data->regmap)) {
-+ ret = PTR_ERR(priv_data->regmap);
-+ return ret;
-+ }
-+
-+ i2c_set_clientdata(i2c, priv_data);
-+
-+ ret = snd_soc_register_codec(&i2c->dev,
-+ &soc_codec_dev_tas5713, &tas5713_dai, 1);
-+
-+ return ret;
-+}
-+
-+
-+static int tas5713_i2c_remove(struct i2c_client *i2c)
-+{
-+ snd_soc_unregister_codec(&i2c->dev);
-+ i2c_set_clientdata(i2c, NULL);
-+
-+ kfree(priv_data);
-+
-+ return 0;
-+}
-+
-+
-+static const struct i2c_device_id tas5713_i2c_id[] = {
-+ { "tas5713", 0 },
-+ { }
-+};
-+
-+MODULE_DEVICE_TABLE(i2c, tas5713_i2c_id);
-+
-+
-+static struct i2c_driver tas5713_i2c_driver = {
-+ .driver = {
-+ .name = "tas5713",
-+ .owner = THIS_MODULE,
-+ .of_match_table = tas5713_of_match,
-+ },
-+ .probe = tas5713_i2c_probe,
-+ .remove = tas5713_i2c_remove,
-+ .id_table = tas5713_i2c_id
-+};
-+
-+
-+static int __init tas5713_modinit(void)
-+{
-+ int ret = 0;
-+
-+ ret = i2c_add_driver(&tas5713_i2c_driver);
-+ if (ret) {
-+ printk(KERN_ERR "Failed to register tas5713 I2C driver: %d\n",
-+ ret);
-+ }
-+
-+ return ret;
-+}
-+module_init(tas5713_modinit);
-+
-+
-+static void __exit tas5713_exit(void)
-+{
-+ i2c_del_driver(&tas5713_i2c_driver);
-+}
-+module_exit(tas5713_exit);
-+
-+
-+MODULE_AUTHOR("Sebastian Eickhoff <basti.eickhoff@googlemail.com>");
-+MODULE_DESCRIPTION("ASoC driver for TAS5713");
-+MODULE_LICENSE("GPL v2");
---- /dev/null
-+++ b/sound/soc/codecs/tas5713.h
-@@ -0,0 +1,210 @@
-+/*
-+ * ASoC Driver for TAS5713
-+ *
-+ * Author: Sebastian Eickhoff <basti.eickhoff@googlemail.com>
-+ * Copyright 2014
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ */
-+
-+#ifndef _TAS5713_H
-+#define _TAS5713_H
-+
-+
-+// TAS5713 I2C-bus register addresses
-+
-+#define TAS5713_CLOCK_CTRL 0x00
-+#define TAS5713_DEVICE_ID 0x01
-+#define TAS5713_ERROR_STATUS 0x02
-+#define TAS5713_SYSTEM_CTRL1 0x03
-+#define TAS5713_SERIAL_DATA_INTERFACE 0x04
-+#define TAS5713_SYSTEM_CTRL2 0x05
-+#define TAS5713_SOFT_MUTE 0x06
-+#define TAS5713_VOL_MASTER 0x07
-+#define TAS5713_VOL_CH1 0x08
-+#define TAS5713_VOL_CH2 0x09
-+#define TAS5713_VOL_HEADPHONE 0x0A
-+#define TAS5713_VOL_CONFIG 0x0E
-+#define TAS5713_MODULATION_LIMIT 0x10
-+#define TAS5713_IC_DLY_CH1 0x11
-+#define TAS5713_IC_DLY_CH2 0x12
-+#define TAS5713_IC_DLY_CH3 0x13
-+#define TAS5713_IC_DLY_CH4 0x14
-+
-+#define TAS5713_START_STOP_PERIOD 0x1A
-+#define TAS5713_OSC_TRIM 0x1B
-+#define TAS5713_BKND_ERR 0x1C
-+
-+#define TAS5713_INPUT_MUX 0x20
-+#define TAS5713_SRC_SELECT_CH4 0x21
-+#define TAS5713_PWM_MUX 0x25
-+
-+#define TAS5713_CH1_BQ0 0x29
-+#define TAS5713_CH1_BQ1 0x2A
-+#define TAS5713_CH1_BQ2 0x2B
-+#define TAS5713_CH1_BQ3 0x2C
-+#define TAS5713_CH1_BQ4 0x2D
-+#define TAS5713_CH1_BQ5 0x2E
-+#define TAS5713_CH1_BQ6 0x2F
-+#define TAS5713_CH1_BQ7 0x58
-+#define TAS5713_CH1_BQ8 0x59
-+
-+#define TAS5713_CH2_BQ0 0x30
-+#define TAS5713_CH2_BQ1 0x31
-+#define TAS5713_CH2_BQ2 0x32
-+#define TAS5713_CH2_BQ3 0x33
-+#define TAS5713_CH2_BQ4 0x34
-+#define TAS5713_CH2_BQ5 0x35
-+#define TAS5713_CH2_BQ6 0x36
-+#define TAS5713_CH2_BQ7 0x5C
-+#define TAS5713_CH2_BQ8 0x5D
-+
-+#define TAS5713_CH4_BQ0 0x5A
-+#define TAS5713_CH4_BQ1 0x5B
-+#define TAS5713_CH3_BQ0 0x5E
-+#define TAS5713_CH3_BQ1 0x5F
-+
-+#define TAS5713_DRC1_SOFTENING_FILTER_ALPHA_OMEGA 0x3B
-+#define TAS5713_DRC1_ATTACK_RELEASE_RATE 0x3C
-+#define TAS5713_DRC2_SOFTENING_FILTER_ALPHA_OMEGA 0x3E
-+#define TAS5713_DRC2_ATTACK_RELEASE_RATE 0x3F
-+#define TAS5713_DRC1_ATTACK_RELEASE_THRES 0x40
-+#define TAS5713_DRC2_ATTACK_RELEASE_THRES 0x43
-+#define TAS5713_DRC_CTRL 0x46
-+
-+#define TAS5713_BANK_SW_CTRL 0x50
-+#define TAS5713_CH1_OUTPUT_MIXER 0x51
-+#define TAS5713_CH2_OUTPUT_MIXER 0x52
-+#define TAS5713_CH1_INPUT_MIXER 0x53
-+#define TAS5713_CH2_INPUT_MIXER 0x54
-+#define TAS5713_OUTPUT_POST_SCALE 0x56
-+#define TAS5713_OUTPUT_PRESCALE 0x57
-+
-+#define TAS5713_IDF_POST_SCALE 0x62
-+
-+#define TAS5713_CH1_INLINE_MIXER 0x70
-+#define TAS5713_CH1_INLINE_DRC_EN_MIXER 0x71
-+#define TAS5713_CH1_R_CHANNEL_MIXER 0x72
-+#define TAS5713_CH1_L_CHANNEL_MIXER 0x73
-+#define TAS5713_CH2_INLINE_MIXER 0x74
-+#define TAS5713_CH2_INLINE_DRC_EN_MIXER 0x75
-+#define TAS5713_CH2_L_CHANNEL_MIXER 0x76
-+#define TAS5713_CH2_R_CHANNEL_MIXER 0x77
-+
-+#define TAS5713_UPDATE_DEV_ADDR_KEY 0xF8
-+#define TAS5713_UPDATE_DEV_ADDR_REG 0xF9
-+
-+#define TAS5713_REGISTER_COUNT 0x46
-+#define TAS5713_MAX_REGISTER 0xF9
-+
-+
-+// Bitmasks for registers
-+#define TAS5713_SOFT_MUTE_ALL 0x07
-+
-+
-+
-+struct tas5713_init_command {
-+ const int size;
-+ const char *const data;
-+};
-+
-+static const struct tas5713_init_command tas5713_init_sequence[] = {
-+
-+ // Trim oscillator
-+ { .size = 2, .data = "\x1B\x00" },
-+ // System control register 1 (0x03): block DC
-+ { .size = 2, .data = "\x03\x80" },
-+ // Mute everything
-+ { .size = 2, .data = "\x05\x40" },
-+ // Modulation limit register (0x10): 97.7%
-+ { .size = 2, .data = "\x10\x02" },
-+ // Interchannel delay registers
-+ // (0x11, 0x12, 0x13, and 0x14): BD mode
-+ { .size = 2, .data = "\x11\xB8" },
-+ { .size = 2, .data = "\x12\x60" },
-+ { .size = 2, .data = "\x13\xA0" },
-+ { .size = 2, .data = "\x14\x48" },
-+ // PWM shutdown group register (0x19): no shutdown
-+ { .size = 2, .data = "\x19\x00" },
-+ // Input multiplexer register (0x20): BD mode
-+ { .size = 2, .data = "\x20\x00\x89\x77\x72" },
-+ // PWM output mux register (0x25)
-+ // Channel 1 --> OUTA, channel 1 neg --> OUTB
-+ // Channel 2 --> OUTC, channel 2 neg --> OUTD
-+ { .size = 5, .data = "\x25\x01\x02\x13\x45" },
-+ // DRC control (0x46): DRC off
-+ { .size = 5, .data = "\x46\x00\x00\x00\x00" },
-+ // BKND_ERR register (0x1C): 299ms reset period
-+ { .size = 2, .data = "\x1C\x07" },
-+ // Mute channel 3
-+ { .size = 2, .data = "\x0A\xFF" },
-+ // Volume configuration register (0x0E): volume slew 512 steps
-+ { .size = 2, .data = "\x0E\x90" },
-+ // Clock control register (0x00): 44/48kHz, MCLK=64xfs
-+ { .size = 2, .data = "\x00\x60" },
-+ // Bank switch and eq control (0x50): no bank switching
-+ { .size = 5, .data = "\x50\x00\x00\x00\x00" },
-+ // Volume registers (0x07, 0x08, 0x09, 0x0A)
-+ { .size = 2, .data = "\x07\x20" },
-+ { .size = 2, .data = "\x08\x30" },
-+ { .size = 2, .data = "\x09\x30" },
-+ { .size = 2, .data = "\x0A\xFF" },
-+ // 0x72, 0x73, 0x76, 0x77 input mixer:
-+ // no intermix between channels
-+ { .size = 5, .data = "\x72\x00\x00\x00\x00" },
-+ { .size = 5, .data = "\x73\x00\x80\x00\x00" },
-+ { .size = 5, .data = "\x76\x00\x00\x00\x00" },
-+ { .size = 5, .data = "\x77\x00\x80\x00\x00" },
-+ // 0x70, 0x71, 0x74, 0x75 inline DRC mixer:
-+ // no inline DRC inmix
-+ { .size = 5, .data = "\x70\x00\x80\x00\x00" },
-+ { .size = 5, .data = "\x71\x00\x00\x00\x00" },
-+ { .size = 5, .data = "\x74\x00\x80\x00\x00" },
-+ { .size = 5, .data = "\x75\x00\x00\x00\x00" },
-+ // 0x56, 0x57 Output scale
-+ { .size = 5, .data = "\x56\x00\x80\x00\x00" },
-+ { .size = 5, .data = "\x57\x00\x02\x00\x00" },
-+ // 0x3B, 0x3c
-+ { .size = 9, .data = "\x3B\x00\x08\x00\x00\x00\x78\x00\x00" },
-+ { .size = 9, .data = "\x3C\x00\x00\x01\x00\xFF\xFF\xFF\x00" },
-+ { .size = 9, .data = "\x3E\x00\x08\x00\x00\x00\x78\x00\x00" },
-+ { .size = 9, .data = "\x3F\x00\x00\x01\x00\xFF\xFF\xFF\x00" },
-+ { .size = 9, .data = "\x40\x00\x00\x01\x00\xFF\xFF\xFF\x00" },
-+ { .size = 9, .data = "\x43\x00\x00\x01\x00\xFF\xFF\xFF\x00" },
-+ // 0x51, 0x52: output mixer
-+ { .size = 9, .data = "\x51\x00\x80\x00\x00\x00\x00\x00\x00" },
-+ { .size = 9, .data = "\x52\x00\x80\x00\x00\x00\x00\x00\x00" },
-+ // PEQ defaults
-+ { .size = 21, .data = "\x29\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+ { .size = 21, .data = "\x2A\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+ { .size = 21, .data = "\x2B\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+ { .size = 21, .data = "\x2C\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+ { .size = 21, .data = "\x2D\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+ { .size = 21, .data = "\x2E\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+ { .size = 21, .data = "\x2F\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+ { .size = 21, .data = "\x30\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+ { .size = 21, .data = "\x31\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+ { .size = 21, .data = "\x32\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+ { .size = 21, .data = "\x33\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+ { .size = 21, .data = "\x34\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+ { .size = 21, .data = "\x35\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+ { .size = 21, .data = "\x36\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+ { .size = 21, .data = "\x58\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+ { .size = 21, .data = "\x59\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+ { .size = 21, .data = "\x5C\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+ { .size = 21, .data = "\x5D\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+ { .size = 21, .data = "\x5E\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+ { .size = 21, .data = "\x5F\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+ { .size = 21, .data = "\x5A\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+ { .size = 21, .data = "\x5B\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+};
-+
-+
-+#endif /* _TAS5713_H */