1 files changed, 0 insertions, 74 deletions
diff --git a/target/linux/brcm2708/patches-3.18/0081-Added-support-to-reserve-enable-a-GPIO-pin-to-be-use.patch b/target/linux/brcm2708/patches-3.18/0081-Added-support-to-reserve-enable-a-GPIO-pin-to-be-use.patch
deleted file mode 100644
index 2d8e7ce9d1..0000000000
--- a/target/linux/brcm2708/patches-3.18/0081-Added-support-to-reserve-enable-a-GPIO-pin-to-be-use.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 47a2d8098a9523435aec2fff1389ae92fd8791a9 Mon Sep 17 00:00:00 2001
-From: Timo Kokkonen <tjko@iki.fi>
-Date: Wed, 29 Oct 2014 23:30:30 -0700
-Subject: [PATCH 081/114] Added support to reserve/enable a GPIO pin to be used
- from pps-gpio module (LinuxPPS). Enable PPS modules in default config for
- RPi.
-
----
- arch/arm/mach-bcm2708/bcm2708.c | 27 +++++++++++++++++++++++++++
- 1 file changed, 27 insertions(+)
-
---- a/arch/arm/mach-bcm2708/bcm2708.c
-+++ b/arch/arm/mach-bcm2708/bcm2708.c
-@@ -37,6 +37,7 @@
- #include <linux/spi/spi.h>
- #include <linux/gpio/machine.h>
- #include <linux/w1-gpio.h>
-+#include <linux/pps-gpio.h>
- 
- #include <linux/version.h>
- #include <linux/clkdev.h>
-@@ -93,6 +94,7 @@ static unsigned disk_led_active_low = 1;
- static unsigned reboot_part = 0;
- static unsigned w1_gpio_pin = W1_GPIO;
- static unsigned w1_gpio_pullup = W1_PULLUP;
-+static int pps_gpio_pin = -1;
- static bool vc_i2c_override = false;
- 
- static unsigned use_dt = 0;
-@@ -274,6 +276,19 @@ static struct platform_device w1_device
- };
- #endif
- 
-+static struct pps_gpio_platform_data pps_gpio_info = {
-+	.assert_falling_edge = false,
-+	.capture_clear = false,
-+	.gpio_pin = -1,
-+	.gpio_label = "PPS",
-+};
-+
-+static struct platform_device pps_gpio_device = {
-+	.name = "pps-gpio",
-+	.id = PLATFORM_DEVID_NONE,
-+	.dev.platform_data = &pps_gpio_info,
-+};
-+
- static u64 fb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
- 
- static struct platform_device bcm2708_fb_device = {
-@@ -841,6 +856,16 @@ void __init bcm2708_init(void)
- #ifdef CONFIG_BCM2708_GPIO
- 	bcm_register_device_dt(&bcm2708_gpio_device);
- #endif
-+
-+#if defined(CONFIG_PPS_CLIENT_GPIO) || defined(CONFIG_PPS_CLIENT_GPIO_MODULE)
-+	if (!use_dt && (pps_gpio_pin >= 0)) {
-+		pr_info("bcm2708: GPIO %d setup as pps-gpio device\n", pps_gpio_pin);
-+		pps_gpio_info.gpio_pin = pps_gpio_pin;
-+		pps_gpio_device.id = pps_gpio_pin;
-+		bcm_register_device(&pps_gpio_device);
-+	}
-+#endif
-+
- #if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE)
- 	w1_gpio_pdata.pin = w1_gpio_pin;
- 	w1_gpio_pdata.ext_pullup_enable_pin = w1_gpio_pullup;
-@@ -1101,5 +1126,7 @@ module_param(disk_led_active_low, uint,
- module_param(reboot_part, uint, 0644);
- module_param(w1_gpio_pin, uint, 0644);
- module_param(w1_gpio_pullup, uint, 0644);
-+module_param(pps_gpio_pin, int, 0644);
-+MODULE_PARM_DESC(pps_gpio_pin, "Set GPIO pin to reserve for PPS");
- module_param(vc_i2c_override, bool, 0644);
- MODULE_PARM_DESC(vc_i2c_override, "Allow the use of VC's I2C peripheral.");