1 files changed, 0 insertions, 71 deletions
diff --git a/target/linux/brcm2708/patches-3.18/0051-BCM2708-use-pinctrl-bcm2835.patch b/target/linux/brcm2708/patches-3.18/0051-BCM2708-use-pinctrl-bcm2835.patch
deleted file mode 100644
index 84abb3e6de..0000000000
--- a/target/linux/brcm2708/patches-3.18/0051-BCM2708-use-pinctrl-bcm2835.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From fff70fcc73e09e86d46f87dd44459870f15423b2 Mon Sep 17 00:00:00 2001
-From: notro <notro@tronnes.org>
-Date: Thu, 10 Jul 2014 13:59:47 +0200
-Subject: [PATCH 051/114] BCM2708: use pinctrl-bcm2835
-
-Use pinctrl-bcm2835 instead of the pinctrl-bcm2708 and bcm2708_gpio
-combination.
-
-Signed-off-by: Noralf Tronnes <notro@tronnes.org>
----
- arch/arm/boot/dts/bcm2708.dtsi    | 12 ++++++++++++
- arch/arm/mach-bcm2708/Kconfig     |  3 +++
- arch/arm/mach-bcm2708/bcm2708.c   |  2 +-
- drivers/pinctrl/pinctrl-bcm2835.c |  2 +-
- 4 files changed, 17 insertions(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm2708.dtsi
-+++ b/arch/arm/boot/dts/bcm2708.dtsi
-@@ -26,6 +26,18 @@
- 			interrupt-controller;
- 			#interrupt-cells = <2>;
- 		};
-+
-+		gpio: gpio {
-+			compatible = "brcm,bcm2835-gpio";
-+			reg = <0x7e200000 0xb4>;
-+			interrupts = <2 17>, <2 18>;
-+
-+			gpio-controller;
-+			#gpio-cells = <2>;
-+
-+			interrupt-controller;
-+			#interrupt-cells = <2>;
-+		};
- 	};
- 
- 	clocks {
---- a/arch/arm/mach-bcm2708/Kconfig
-+++ b/arch/arm/mach-bcm2708/Kconfig
-@@ -14,6 +14,9 @@ config BCM2708_DT
- 	depends on MACH_BCM2708
- 	default n
- 	select USE_OF
-+	select ARCH_REQUIRE_GPIOLIB
-+	select PINCTRL
-+	select PINCTRL_BCM2835
- 	help
- 	  Enable Device Tree support for BCM2708
- 
---- a/arch/arm/mach-bcm2708/bcm2708.c
-+++ b/arch/arm/mach-bcm2708/bcm2708.c
-@@ -767,7 +767,7 @@ void __init bcm2708_init(void)
- 	bcm_register_device(&bcm2708_dmaman_device);
- 	bcm_register_device(&bcm2708_vcio_device);
- #ifdef CONFIG_BCM2708_GPIO
--	bcm_register_device(&bcm2708_gpio_device);
-+	bcm_register_device_dt(&bcm2708_gpio_device);
- #endif
- #if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE)
- 	w1_gpio_pdata.pin = w1_gpio_pin;
---- a/drivers/pinctrl/pinctrl-bcm2835.c
-+++ b/drivers/pinctrl/pinctrl-bcm2835.c
-@@ -382,7 +382,7 @@ static struct gpio_chip bcm2835_gpio_chi
- 	.get = bcm2835_gpio_get,
- 	.set = bcm2835_gpio_set,
- 	.to_irq = bcm2835_gpio_to_irq,
--	.base = -1,
-+	.base = 0,
- 	.ngpio = BCM2835_NUM_GPIOS,
- 	.can_sleep = false,
- };