aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-3.18/0021-enabling-the-realtime-clock-1-wire-chip-DS1307-and-1.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-3.18/0021-enabling-the-realtime-clock-1-wire-chip-DS1307-and-1.patch')
-rw-r--r--target/linux/brcm2708/patches-3.18/0021-enabling-the-realtime-clock-1-wire-chip-DS1307-and-1.patch264
1 files changed, 0 insertions, 264 deletions
diff --git a/target/linux/brcm2708/patches-3.18/0021-enabling-the-realtime-clock-1-wire-chip-DS1307-and-1.patch b/target/linux/brcm2708/patches-3.18/0021-enabling-the-realtime-clock-1-wire-chip-DS1307-and-1.patch
deleted file mode 100644
index 92aaea5f65..0000000000
--- a/target/linux/brcm2708/patches-3.18/0021-enabling-the-realtime-clock-1-wire-chip-DS1307-and-1.patch
+++ /dev/null
@@ -1,264 +0,0 @@
-From bd7d1508a83c544f2d52f668ebabe55c2ea207c5 Mon Sep 17 00:00:00 2001
-From: popcornmix <popcornmix@gmail.com>
-Date: Wed, 8 May 2013 11:46:50 +0100
-Subject: [PATCH 021/114] enabling the realtime clock 1-wire chip DS1307 and
- 1-wire on GPIO4 (as a module)
-
-1-wire: Add support for configuring pin for w1-gpio kernel module
-See: https://github.com/raspberrypi/linux/pull/457
-
-Add bitbanging pullups, use them for w1-gpio
-
-Allows parasite power to work, uses module option pullup=1
-
-bcm2708: Ensure 1-wire pullup is disabled by default, and expose as module parameter
-
-Signed-off-by: Alex J Lennon <ajlennon@dynamicdevices.co.uk>
-
-w1-gpio: Add gpiopin module parameter and correctly free up gpio pull-up pin, if set
-
-Signed-off-by: Alex J Lennon <ajlennon@dynamicdevices.co.uk>
----
- arch/arm/mach-bcm2708/bcm2708.c | 29 ++++++++++++++++++++++
- drivers/w1/masters/w1-gpio.c | 55 +++++++++++++++++++++++++++++++++++++----
- drivers/w1/w1.h | 6 +++++
- drivers/w1/w1_int.c | 14 +++++++++++
- drivers/w1/w1_io.c | 18 +++++++++++---
- 5 files changed, 114 insertions(+), 8 deletions(-)
-
---- a/arch/arm/mach-bcm2708/bcm2708.c
-+++ b/arch/arm/mach-bcm2708/bcm2708.c
-@@ -32,6 +32,7 @@
- #include <linux/io.h>
- #include <linux/module.h>
- #include <linux/spi/spi.h>
-+#include <linux/w1-gpio.h>
-
- #include <linux/version.h>
- #include <linux/clkdev.h>
-@@ -76,12 +77,19 @@
- */
- #define DMA_MASK_BITS_COMMON 32
-
-+// use GPIO 4 for the one-wire GPIO pin, if enabled
-+#define W1_GPIO 4
-+// ensure one-wire GPIO pullup is disabled by default
-+#define W1_PULLUP -1
-+
- /* command line parameters */
- static unsigned boardrev, serial;
- static unsigned uart_clock;
- static unsigned disk_led_gpio = 16;
- static unsigned disk_led_active_low = 1;
- static unsigned reboot_part = 0;
-+static unsigned w1_gpio_pin = W1_GPIO;
-+static unsigned w1_gpio_pullup = W1_PULLUP;
-
- static void __init bcm2708_init_led(void);
-
-@@ -258,6 +266,20 @@ static struct platform_device bcm2708_dm
- .num_resources = ARRAY_SIZE(bcm2708_dmaman_resources),
- };
-
-+#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE)
-+static struct w1_gpio_platform_data w1_gpio_pdata = {
-+ .pin = W1_GPIO,
-+ .ext_pullup_enable_pin = W1_PULLUP,
-+ .is_open_drain = 0,
-+};
-+
-+static struct platform_device w1_device = {
-+ .name = "w1-gpio",
-+ .id = -1,
-+ .dev.platform_data = &w1_gpio_pdata,
-+};
-+#endif
-+
- static u64 fb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
-
- static struct platform_device bcm2708_fb_device = {
-@@ -652,6 +674,11 @@ void __init bcm2708_init(void)
- #ifdef CONFIG_BCM2708_GPIO
- bcm_register_device(&bcm2708_gpio_device);
- #endif
-+#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE)
-+ w1_gpio_pdata.pin = w1_gpio_pin;
-+ w1_gpio_pdata.ext_pullup_enable_pin = w1_gpio_pullup;
-+ platform_device_register(&w1_device);
-+#endif
- bcm_register_device(&bcm2708_systemtimer_device);
- bcm_register_device(&bcm2708_fb_device);
- bcm_register_device(&bcm2708_usb_device);
-@@ -853,3 +880,5 @@ module_param(uart_clock, uint, 0644);
- module_param(disk_led_gpio, uint, 0644);
- module_param(disk_led_active_low, uint, 0644);
- module_param(reboot_part, uint, 0644);
-+module_param(w1_gpio_pin, uint, 0644);
-+module_param(w1_gpio_pullup, uint, 0644);
---- a/drivers/w1/masters/w1-gpio.c
-+++ b/drivers/w1/masters/w1-gpio.c
-@@ -23,6 +23,15 @@
- #include "../w1.h"
- #include "../w1_int.h"
-
-+static int w1_gpio_pullup = -1;
-+static int w1_gpio_pullup_orig = -1;
-+module_param_named(pullup, w1_gpio_pullup, int, 0);
-+MODULE_PARM_DESC(pullup, "GPIO pin pullup number");
-+static int w1_gpio_pin = -1;
-+static int w1_gpio_pin_orig = -1;
-+module_param_named(gpiopin, w1_gpio_pin, int, 0);
-+MODULE_PARM_DESC(gpiopin, "GPIO pin number");
-+
- static u8 w1_gpio_set_pullup(void *data, int delay)
- {
- struct w1_gpio_platform_data *pdata = data;
-@@ -67,6 +76,16 @@ static u8 w1_gpio_read_bit(void *data)
- return gpio_get_value(pdata->pin) ? 1 : 0;
- }
-
-+static void w1_gpio_bitbang_pullup(void *data, u8 on)
-+{
-+ struct w1_gpio_platform_data *pdata = data;
-+
-+ if (on)
-+ gpio_direction_output(pdata->pin, 1);
-+ else
-+ gpio_direction_input(pdata->pin);
-+}
-+
- #if defined(CONFIG_OF)
- static struct of_device_id w1_gpio_dt_ids[] = {
- { .compatible = "w1-gpio" },
-@@ -113,13 +132,15 @@ static int w1_gpio_probe_dt(struct platf
- static int w1_gpio_probe(struct platform_device *pdev)
- {
- struct w1_bus_master *master;
-- struct w1_gpio_platform_data *pdata;
-+ struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
- int err;
-
-- if (of_have_populated_dt()) {
-- err = w1_gpio_probe_dt(pdev);
-- if (err < 0)
-- return err;
-+ if(pdata == NULL) {
-+ if (of_have_populated_dt()) {
-+ err = w1_gpio_probe_dt(pdev);
-+ if (err < 0)
-+ return err;
-+ }
- }
-
- pdata = dev_get_platdata(&pdev->dev);
-@@ -136,6 +157,19 @@ static int w1_gpio_probe(struct platform
- return -ENOMEM;
- }
-
-+ w1_gpio_pin_orig = pdata->pin;
-+ w1_gpio_pullup_orig = pdata->ext_pullup_enable_pin;
-+
-+ if(gpio_is_valid(w1_gpio_pin)) {
-+ pdata->pin = w1_gpio_pin;
-+ pdata->ext_pullup_enable_pin = -1;
-+ }
-+ if(gpio_is_valid(w1_gpio_pullup)) {
-+ pdata->ext_pullup_enable_pin = w1_gpio_pullup;
-+ }
-+
-+ dev_info(&pdev->dev, "gpio pin %d, gpio pullup pin %d\n", pdata->pin, pdata->ext_pullup_enable_pin);
-+
- err = devm_gpio_request(&pdev->dev, pdata->pin, "w1");
- if (err) {
- dev_err(&pdev->dev, "gpio_request (pin) failed\n");
-@@ -165,6 +199,14 @@ static int w1_gpio_probe(struct platform
- master->set_pullup = w1_gpio_set_pullup;
- }
-
-+ if (gpio_is_valid(w1_gpio_pullup)) {
-+ if (pdata->is_open_drain)
-+ printk(KERN_ERR "w1-gpio 'pullup' option "
-+ "doesn't work with open drain GPIO\n");
-+ else
-+ master->bitbang_pullup = w1_gpio_bitbang_pullup;
-+ }
-+
- err = w1_add_master_device(master);
- if (err) {
- dev_err(&pdev->dev, "w1_add_master device failed\n");
-@@ -195,6 +237,9 @@ static int w1_gpio_remove(struct platfor
-
- w1_remove_master_device(master);
-
-+ pdata->pin = w1_gpio_pin_orig;
-+ pdata->ext_pullup_enable_pin = w1_gpio_pullup_orig;
-+
- return 0;
- }
-
---- a/drivers/w1/w1.h
-+++ b/drivers/w1/w1.h
-@@ -171,6 +171,12 @@ struct w1_bus_master
-
- u8 (*set_pullup)(void *, int);
-
-+ /**
-+ * Turns the pullup on/off in bitbanging mode, takes an on/off argument.
-+ * @return -1=Error, 0=completed
-+ */
-+ void (*bitbang_pullup) (void *, u8);
-+
- void (*search)(void *, struct w1_master *,
- u8, w1_slave_found_callback);
- };
---- a/drivers/w1/w1_int.c
-+++ b/drivers/w1/w1_int.c
-@@ -123,6 +123,20 @@ int w1_add_master_device(struct w1_bus_m
- return(-EINVAL);
- }
-
-+ /* bitbanging hardware uses bitbang_pullup, other hardware uses set_pullup
-+ * and takes care of timing itself */
-+ if (!master->write_byte && !master->touch_bit && master->set_pullup) {
-+ printk(KERN_ERR "w1_add_master_device: set_pullup requires "
-+ "write_byte or touch_bit, disabling\n");
-+ master->set_pullup = NULL;
-+ }
-+
-+ if (master->set_pullup && master->bitbang_pullup) {
-+ printk(KERN_ERR "w1_add_master_device: set_pullup should not "
-+ "be set when bitbang_pullup is used, disabling\n");
-+ master->set_pullup = NULL;
-+ }
-+
- /* Lock until the device is added (or not) to w1_masters. */
- mutex_lock(&w1_mlock);
- /* Search for the first available id (starting at 1). */
---- a/drivers/w1/w1_io.c
-+++ b/drivers/w1/w1_io.c
-@@ -134,10 +134,22 @@ static void w1_pre_write(struct w1_maste
- static void w1_post_write(struct w1_master *dev)
- {
- if (dev->pullup_duration) {
-- if (dev->enable_pullup && dev->bus_master->set_pullup)
-- dev->bus_master->set_pullup(dev->bus_master->data, 0);
-- else
-+ if (dev->enable_pullup) {
-+ if (dev->bus_master->set_pullup) {
-+ dev->bus_master->set_pullup(dev->
-+ bus_master->data,
-+ 0);
-+ } else if (dev->bus_master->bitbang_pullup) {
-+ dev->bus_master->
-+ bitbang_pullup(dev->bus_master->data, 1);
- msleep(dev->pullup_duration);
-+ dev->bus_master->
-+ bitbang_pullup(dev->bus_master->data, 0);
-+ }
-+ } else {
-+ msleep(dev->pullup_duration);
-+ }
-+
- dev->pullup_duration = 0;
- }
- }