diff options
Diffstat (limited to 'target/linux/brcm2708/patches-3.10/0002-Add-dwc_otg-driver.patch')
| -rw-r--r-- | target/linux/brcm2708/patches-3.10/0002-Add-dwc_otg-driver.patch | 56891 |
1 files changed, 56891 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-3.10/0002-Add-dwc_otg-driver.patch b/target/linux/brcm2708/patches-3.10/0002-Add-dwc_otg-driver.patch new file mode 100644 index 0000000000..7f7db6341c --- /dev/null +++ b/target/linux/brcm2708/patches-3.10/0002-Add-dwc_otg-driver.patch @@ -0,0 +1,56891 @@ +From ee24f1f0affd88d3e101a7e66c5ebfd8e582b868 Mon Sep 17 00:00:00 2001 +From: popcornmix <popcornmix@gmail.com> +Date: Wed, 1 May 2013 19:46:17 +0100 +Subject: [PATCH 002/174] Add dwc_otg driver + +Signed-off-by: popcornmix <popcornmix@gmail.com> +--- + drivers/usb/Makefile | 1 + + drivers/usb/core/generic.c | 1 + + drivers/usb/core/message.c | 79 + + drivers/usb/core/otg_whitelist.h | 172 +- + drivers/usb/gadget/file_storage.c | 3676 ++++++++++ + drivers/usb/host/Kconfig | 13 + + drivers/usb/host/Makefile | 2 + + drivers/usb/host/dwc_common_port/Makefile | 58 + + drivers/usb/host/dwc_common_port/Makefile.fbsd | 17 + + drivers/usb/host/dwc_common_port/Makefile.linux | 49 + + drivers/usb/host/dwc_common_port/changes.txt | 174 + + drivers/usb/host/dwc_common_port/doc/doxygen.cfg | 270 + + drivers/usb/host/dwc_common_port/dwc_cc.c | 532 ++ + drivers/usb/host/dwc_common_port/dwc_cc.h | 225 + + drivers/usb/host/dwc_common_port/dwc_common_fbsd.c | 1308 ++++ + .../usb/host/dwc_common_port/dwc_common_linux.c | 1421 ++++ + drivers/usb/host/dwc_common_port/dwc_common_nbsd.c | 1275 ++++ + drivers/usb/host/dwc_common_port/dwc_crypto.c | 308 + + drivers/usb/host/dwc_common_port/dwc_crypto.h | 111 + + drivers/usb/host/dwc_common_port/dwc_dh.c | 291 + + drivers/usb/host/dwc_common_port/dwc_dh.h | 106 + + drivers/usb/host/dwc_common_port/dwc_list.h | 594 ++ + drivers/usb/host/dwc_common_port/dwc_mem.c | 245 + + drivers/usb/host/dwc_common_port/dwc_modpow.c | 636 ++ + drivers/usb/host/dwc_common_port/dwc_modpow.h | 34 + + drivers/usb/host/dwc_common_port/dwc_notifier.c | 319 + + drivers/usb/host/dwc_common_port/dwc_notifier.h | 122 + + drivers/usb/host/dwc_common_port/dwc_os.h | 1260 ++++ + drivers/usb/host/dwc_common_port/usb.h | 946 +++ + drivers/usb/host/dwc_otg/Makefile | 80 + + drivers/usb/host/dwc_otg/doc/doxygen.cfg | 224 + + drivers/usb/host/dwc_otg/dummy_audio.c | 1575 +++++ + drivers/usb/host/dwc_otg/dwc_cfi_common.h | 142 + + drivers/usb/host/dwc_otg/dwc_otg_adp.c | 854 +++ + drivers/usb/host/dwc_otg/dwc_otg_adp.h | 80 + + drivers/usb/host/dwc_otg/dwc_otg_attr.c | 1210 ++++ + drivers/usb/host/dwc_otg/dwc_otg_attr.h | 89 + + drivers/usb/host/dwc_otg/dwc_otg_cfi.c | 1876 +++++ + drivers/usb/host/dwc_otg/dwc_otg_cfi.h | 320 + + drivers/usb/host/dwc_otg/dwc_otg_cil.c | 7151 ++++++++++++++++++++ + drivers/usb/host/dwc_otg/dwc_otg_cil.h | 1464 ++++ + drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c | 1563 +++++ + drivers/usb/host/dwc_otg/dwc_otg_core_if.h | 705 ++ + drivers/usb/host/dwc_otg/dwc_otg_dbg.h | 116 + + drivers/usb/host/dwc_otg/dwc_otg_driver.c | 1700 +++++ + drivers/usb/host/dwc_otg/dwc_otg_driver.h | 86 + + drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 3473 ++++++++++ + drivers/usb/host/dwc_otg/dwc_otg_hcd.h | 824 +++ + drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c | 1133 ++++ + drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h | 412 ++ + drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c | 2106 ++++++ + drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c | 893 +++ + drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c | 922 +++ + drivers/usb/host/dwc_otg/dwc_otg_os_dep.h | 185 + + drivers/usb/host/dwc_otg/dwc_otg_pcd.c | 2708 ++++++++ + drivers/usb/host/dwc_otg/dwc_otg_pcd.h | 266 + + drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h | 360 + + drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c | 5147 ++++++++++++++ + drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c | 1358 ++++ + drivers/usb/host/dwc_otg/dwc_otg_regs.h | 2550 +++++++ + drivers/usb/host/dwc_otg/test/Makefile | 16 + + drivers/usb/host/dwc_otg/test/dwc_otg_test.pm | 337 + + drivers/usb/host/dwc_otg/test/test_mod_param.pl | 133 + + drivers/usb/host/dwc_otg/test/test_sysfs.pl | 193 + + 64 files changed, 56447 insertions(+), 49 deletions(-) + create mode 100644 drivers/usb/gadget/file_storage.c + create mode 100644 drivers/usb/host/dwc_common_port/Makefile + create mode 100644 drivers/usb/host/dwc_common_port/Makefile.fbsd + create mode 100644 drivers/usb/host/dwc_common_port/Makefile.linux + create mode 100644 drivers/usb/host/dwc_common_port/changes.txt + create mode 100644 drivers/usb/host/dwc_common_port/doc/doxygen.cfg + create mode 100644 drivers/usb/host/dwc_common_port/dwc_cc.c + create mode 100644 drivers/usb/host/dwc_common_port/dwc_cc.h + create mode 100644 drivers/usb/host/dwc_common_port/dwc_common_fbsd.c + create mode 100644 drivers/usb/host/dwc_common_port/dwc_common_linux.c + create mode 100644 drivers/usb/host/dwc_common_port/dwc_common_nbsd.c + create mode 100644 drivers/usb/host/dwc_common_port/dwc_crypto.c + create mode 100644 drivers/usb/host/dwc_common_port/dwc_crypto.h + create mode 100644 drivers/usb/host/dwc_common_port/dwc_dh.c + create mode 100644 drivers/usb/host/dwc_common_port/dwc_dh.h + create mode 100644 drivers/usb/host/dwc_common_port/dwc_list.h + create mode 100644 drivers/usb/host/dwc_common_port/dwc_mem.c + create mode 100644 drivers/usb/host/dwc_common_port/dwc_modpow.c + create mode 100644 drivers/usb/host/dwc_common_port/dwc_modpow.h + create mode 100644 drivers/usb/host/dwc_common_port/dwc_notifier.c + create mode 100644 drivers/usb/host/dwc_common_port/dwc_notifier.h + create mode 100644 drivers/usb/host/dwc_common_port/dwc_os.h + create mode 100644 drivers/usb/host/dwc_common_port/usb.h + create mode 100644 drivers/usb/host/dwc_otg/Makefile + create mode 100644 drivers/usb/host/dwc_otg/doc/doxygen.cfg + create mode 100644 drivers/usb/host/dwc_otg/dummy_audio.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_cfi_common.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_adp.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_adp.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_attr.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_attr.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cfi.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cfi.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cil.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cil.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_core_if.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_dbg.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_driver.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_driver.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_os_dep.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_regs.h + create mode 100644 drivers/usb/host/dwc_otg/test/Makefile + create mode 100644 drivers/usb/host/dwc_otg/test/dwc_otg_test.pm + create mode 100644 drivers/usb/host/dwc_otg/test/test_mod_param.pl + create mode 100644 drivers/usb/host/dwc_otg/test/test_sysfs.pl + +--- a/drivers/usb/Makefile ++++ b/drivers/usb/Makefile +@@ -23,6 +23,7 @@ obj-$(CONFIG_USB_U132_HCD) += host/ + obj-$(CONFIG_USB_R8A66597_HCD) += host/ + obj-$(CONFIG_USB_HWA_HCD) += host/ + obj-$(CONFIG_USB_ISP1760_HCD) += host/ ++obj-$(CONFIG_USB_DWCOTG) += host/ + obj-$(CONFIG_USB_IMX21_HCD) += host/ + obj-$(CONFIG_USB_FSL_MPH_DR_OF) += host/ + +--- a/drivers/usb/core/generic.c ++++ b/drivers/usb/core/generic.c +@@ -152,6 +152,7 @@ int usb_choose_configuration(struct usb_ + dev_warn(&udev->dev, + "no configuration chosen from %d choice%s\n", + num_configs, plural(num_configs)); ++ dev_warn(&udev->dev, "No support over %dmA\n", udev->bus_mA); + } + return i; + } +--- a/drivers/usb/core/message.c ++++ b/drivers/usb/core/message.c +@@ -1875,6 +1875,85 @@ free_interfaces: + if (cp->string == NULL && + !(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS)) + cp->string = usb_cache_string(dev, cp->desc.iConfiguration); ++/* Uncomment this define to enable the HS Electrical Test support */ ++#define DWC_HS_ELECT_TST 1 ++#ifdef DWC_HS_ELECT_TST ++ /* Here we implement the HS Electrical Test support. The ++ * tester uses a vendor ID of 0x1A0A to indicate we should ++ * run a special test sequence. The product ID tells us ++ * which sequence to run. We invoke the test sequence by ++ * sending a non-standard SetFeature command to our root ++ * hub port. Our dwc_otg_hcd_hub_control() routine will ++ * recognize the command and perform the desired test ++ * sequence. ++ */ ++ if (dev->descriptor.idVendor == 0x1A0A) { ++ /* HSOTG Electrical Test */ ++ dev_warn(&dev->dev, "VID from HSOTG Electrical Test Fixture\n"); ++ ++ if (dev->bus && dev->bus->root_hub) { ++ struct usb_device *hdev = dev->bus->root_hub; ++ dev_warn(&dev->dev, "Got PID 0x%x\n", dev->descriptor.idProduct); ++ ++ switch (dev->descriptor.idProduct) { ++ case 0x0101: /* TEST_SE0_NAK */ ++ dev_warn(&dev->dev, "TEST_SE0_NAK\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x300, NULL, 0, HZ); ++ break; ++ ++ case 0x0102: /* TEST_J */ ++ dev_warn(&dev->dev, "TEST_J\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x100, NULL, 0, HZ); ++ break; ++ ++ case 0x0103: /* TEST_K */ ++ dev_warn(&dev->dev, "TEST_K\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x200, NULL, 0, HZ); ++ break; ++ ++ case 0x0104: /* TEST_PACKET */ ++ dev_warn(&dev->dev, "TEST_PACKET\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x400, NULL, 0, HZ); ++ break; ++ ++ case 0x0105: /* TEST_FORCE_ENABLE */ ++ dev_warn(&dev->dev, "TEST_FORCE_ENABLE\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x500, NULL, 0, HZ); ++ break; ++ ++ case 0x0106: /* HS_HOST_PORT_SUSPEND_RESUME */ ++ dev_warn(&dev->dev, "HS_HOST_PORT_SUSPEND_RESUME\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x600, NULL, 0, 40 * HZ); ++ break; ++ ++ case 0x0107: /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */ ++ dev_warn(&dev->dev, "SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x700, NULL, 0, 40 * HZ); ++ break; ++ ++ case 0x0108: /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */ ++ dev_warn(&dev->dev, "SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x800, NULL, 0, 40 * HZ); ++ } ++ } ++ } ++#endif /* DWC_HS_ELECT_TST */ + + /* Now that the interfaces are installed, re-enable LPM. */ + usb_unlocked_enable_lpm(dev); +--- a/drivers/usb/core/otg_whitelist.h ++++ b/drivers/usb/core/otg_whitelist.h +@@ -19,33 +19,82 @@ + static struct usb_device_id whitelist_table [] = { + + /* hubs are optional in OTG, but very handy ... */ ++#define CERT_WITHOUT_HUBS ++#if defined(CERT_WITHOUT_HUBS) ++{ USB_DEVICE( 0x0000, 0x0000 ), }, /* Root HUB Only*/ ++#else + { USB_DEVICE_INFO(USB_CLASS_HUB, 0, 0), }, + { USB_DEVICE_INFO(USB_CLASS_HUB, 0, 1), }, ++{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 2), }, ++#endif + + #ifdef CONFIG_USB_PRINTER /* ignoring nonstatic linkage! */ + /* FIXME actually, printers are NOT supposed to use device classes; + * they're supposed to use interface classes... + */ +-{ USB_DEVICE_INFO(7, 1, 1) }, +-{ USB_DEVICE_INFO(7, 1, 2) }, +-{ USB_DEVICE_INFO(7, 1, 3) }, ++//{ USB_DEVICE_INFO(7, 1, 1) }, ++//{ USB_DEVICE_INFO(7, 1, 2) }, ++//{ USB_DEVICE_INFO(7, 1, 3) }, + #endif + + #ifdef CONFIG_USB_NET_CDCETHER + /* Linux-USB CDC Ethernet gadget */ +-{ USB_DEVICE(0x0525, 0xa4a1), }, ++//{ USB_DEVICE(0x0525, 0xa4a1), }, + /* Linux-USB CDC Ethernet + RNDIS gadget */ +-{ USB_DEVICE(0x0525, 0xa4a2), }, ++//{ USB_DEVICE(0x0525, 0xa4a2), }, + #endif + + #if defined(CONFIG_USB_TEST) || defined(CONFIG_USB_TEST_MODULE) + /* gadget zero, for testing */ +-{ USB_DEVICE(0x0525, 0xa4a0), }, ++//{ USB_DEVICE(0x0525, 0xa4a0), }, + #endif ++ ++/* OPT Tester */ ++{ USB_DEVICE( 0x1a0a, 0x0101 ), }, /* TEST_SE0_NAK */ ++{ USB_DEVICE( 0x1a0a, 0x0102 ), }, /* Test_J */ ++{ USB_DEVICE( 0x1a0a, 0x0103 ), }, /* Test_K */ ++{ USB_DEVICE( 0x1a0a, 0x0104 ), }, /* Test_PACKET */ ++{ USB_DEVICE( 0x1a0a, 0x0105 ), }, /* Test_FORCE_ENABLE */ ++{ USB_DEVICE( 0x1a0a, 0x0106 ), }, /* HS_PORT_SUSPEND_RESUME */ ++{ USB_DEVICE( 0x1a0a, 0x0107 ), }, /* SINGLE_STEP_GET_DESCRIPTOR setup */ ++{ USB_DEVICE( 0x1a0a, 0x0108 ), }, /* SINGLE_STEP_GET_DESCRIPTOR execute */ ++ ++/* Sony cameras */ ++{ USB_DEVICE_VER(0x054c,0x0010,0x0410, 0x0500), }, ++ ++/* Memory Devices */ ++//{ USB_DEVICE( 0x0781, 0x5150 ), }, /* SanDisk */ ++//{ USB_DEVICE( 0x05DC, 0x0080 ), }, /* Lexar */ ++//{ USB_DEVICE( 0x4146, 0x9281 ), }, /* IOMEGA */ ++//{ USB_DEVICE( 0x067b, 0x2507 ), }, /* Hammer 20GB External HD */ ++{ USB_DEVICE( 0x0EA0, 0x2168 ), }, /* Ours Technology Inc. (BUFFALO ClipDrive)*/ ++//{ USB_DEVICE( 0x0457, 0x0150 ), }, /* Silicon Integrated Systems Corp. */ ++ ++/* HP Printers */ ++//{ USB_DEVICE( 0x03F0, 0x1102 ), }, /* HP Photosmart 245 */ ++//{ USB_DEVICE( 0x03F0, 0x1302 ), }, /* HP Photosmart 370 Series */ ++ ++/* Speakers */ ++//{ USB_DEVICE( 0x0499, 0x3002 ), }, /* YAMAHA YST-MS35D USB Speakers */ ++//{ USB_DEVICE( 0x0672, 0x1041 ), }, /* Labtec USB Headset */ + + { } /* Terminating entry */ + }; + ++static inline void report_errors(struct usb_device *dev) ++{ ++ /* OTG MESSAGE: report errors here, customize to match your product */ ++ dev_info(&dev->dev, "device Vendor:%04x Product:%04x is not supported\n", ++ le16_to_cpu(dev->descriptor.idVendor), ++ le16_to_cpu(dev->descriptor.idProduct)); ++ if (USB_CLASS_HUB == dev->descriptor.bDeviceClass){ ++ dev_printk(KERN_CRIT, &dev->dev, "Unsupported Hub Topology\n"); ++ } else { ++ dev_printk(KERN_CRIT, &dev->dev, "Attached Device is not Supported\n"); ++ } ++} ++ ++ + static int is_targeted(struct usb_device *dev) + { + struct usb_device_id *id = whitelist_table; +@@ -55,58 +104,83 @@ static int is_targeted(struct usb_device + return 1; + + /* HNP test device is _never_ targeted (see OTG spec 6.6.6) */ +- if ((le16_to_cpu(dev->descriptor.idVendor) == 0x1a0a && +- le16_to_cpu(dev->descriptor.idProduct) == 0xbadd)) +- return 0; ++ if (dev->descriptor.idVendor == 0x1a0a && ++ dev->descriptor.idProduct == 0xbadd) { ++ return 0; ++ } else if (!enable_whitelist) { ++ return 1; ++ } else { + +- /* NOTE: can't use usb_match_id() since interface caches +- * aren't set up yet. this is cut/paste from that code. +- */ +- for (id = whitelist_table; id->match_flags; id++) { +- if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && +- id->idVendor != le16_to_cpu(dev->descriptor.idVendor)) +- continue; +- +- if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) && +- id->idProduct != le16_to_cpu(dev->descriptor.idProduct)) +- continue; +- +- /* No need to test id->bcdDevice_lo != 0, since 0 is never +- greater than any unsigned number. */ +- if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) && +- (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice))) +- continue; +- +- if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) && +- (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice))) +- continue; +- +- if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) && +- (id->bDeviceClass != dev->descriptor.bDeviceClass)) +- continue; +- +- if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) && +- (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass)) +- continue; +- +- if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) && +- (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) +- continue; ++#ifdef DEBUG ++ dev_dbg(&dev->dev, "device V:%04x P:%04x DC:%04x SC:%04x PR:%04x \n", ++ dev->descriptor.idVendor, ++ dev->descriptor.idProduct, ++ dev->descriptor.bDeviceClass, ++ dev->descriptor.bDeviceSubClass, ++ dev->descriptor.bDeviceProtocol); ++#endif + + return 1; ++ /* NOTE: can't use usb_match_id() since interface caches ++ * aren't set up yet. this is cut/paste from that code. ++ */ ++ for (id = whitelist_table; id->match_flags; id++) { ++#ifdef DEBUG ++ dev_dbg(&dev->dev, ++ "ID: V:%04x P:%04x DC:%04x SC:%04x PR:%04x \n", ++ id->idVendor, ++ id->idProduct, ++ id->bDeviceClass, ++ id->bDeviceSubClass, ++ id->bDeviceProtocol); ++#endif ++ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && ++ id->idVendor != le16_to_cpu(dev->descriptor.idVendor)) ++ continue; ++ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) && ++ id->idProduct != le16_to_cpu(dev->descriptor.idProduct)) ++ continue; ++ ++ /* No need to test id->bcdDevice_lo != 0, since 0 is never ++ greater than any unsigned number. */ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) && ++ (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice))) ++ continue; ++ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) && ++ (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice))) ++ continue; ++ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) && ++ (id->bDeviceClass != dev->descriptor.bDeviceClass)) ++ continue; ++ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) && ++ (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass)) ++ continue; ++ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) && ++ (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) ++ continue; ++ ++ return 1; ++ } + } + + /* add other match criteria here ... */ + +- +- /* OTG MESSAGE: report errors here, customize to match your product */ +- dev_err(&dev->dev, "device v%04x p%04x is not supported\n", +- le16_to_cpu(dev->descriptor.idVendor), +- le16_to_cpu(dev->descriptor.idProduct)); + #ifdef CONFIG_USB_OTG_WHITELIST ++ report_errors(dev); + return 0; + #else +- return 1; ++ if (enable_whitelist) { ++ report_errors(dev); ++ return 0; ++ } else { ++ return 1; ++ } + #endif + } + +--- /dev/null ++++ b/drivers/usb/gadget/file_storage.c +@@ -0,0 +1,3676 @@ ++/* ++ * file_storage.c -- File-backed USB Storage Gadget, for USB development ++ * ++ * Copyright (C) 2003-2008 Alan Stern ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions, and the following disclaimer, ++ * without modification. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The names of the above-listed copyright holders may not be used ++ * to endorse or promote products derived from this software without ++ * specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS ++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++ ++/* ++ * The File-backed Storage Gadget acts as a USB Mass Storage device, ++ * appearing to the host as a disk drive or as a CD-ROM drive. In addition ++ * to providing an example of a genuinely useful gadget driver for a USB ++ * device, it also illustrates a technique of double-buffering for increased ++ * throughput. Last but not least, it gives an easy way to probe the ++ * behavior of the Mass Storage drivers in a USB host. ++ * ++ * Backing storage is provided by a regular file or a block device, specified ++ * by the "file" module parameter. Access can be limited to read-only by ++ * setting the optional "ro" module parameter. (For CD-ROM emulation, ++ * access is always read-only.) The gadget will indicate that it has ++ * removable media if the optional "removable" module parameter is set. ++ * ++ * The gadget supports the Control-Bulk (CB), Control-Bulk-Interrupt (CBI), ++ * and Bulk-Only (also known as Bulk-Bulk-Bulk or BBB) transports, selected ++ * by the optional "transport" module parameter. It also supports the ++ * following protocols: RBC (0x01), ATAPI or SFF-8020i (0x02), QIC-157 (0c03), ++ * UFI (0x04), SFF-8070i (0x05), and transparent SCSI (0x06), selected by ++ * the optional "protocol" module parameter. In addition, the default ++ * Vendor ID, Product ID, release number and serial number can be overridden. ++ * ++ * There is support for multiple logical units (LUNs), each of which has ++ * its own backing file. The number of LUNs can be set using the optional ++ * "luns" module parameter (anywhere from 1 to 8), and the corresponding ++ * files are specified using comma-separated lists for "file" and "ro". ++ * The default number of LUNs is taken from the number of "file" elements; ++ * it is 1 if "file" is not given. If "removable" is not set then a backing ++ * file must be specified for each LUN. If it is set, then an unspecified ++ * or empty backing filename means the LUN's medium is not loaded. Ideally ++ * each LUN would be settable independently as a disk drive or a CD-ROM ++ * drive, but currently all LUNs have to be the same type. The CD-ROM ++ * emulation includes a single data track and no audio tracks; hence there ++ * need be only one backing file per LUN. ++ * ++ * Requirements are modest; only a bulk-in and a bulk-out endpoint are ++ * needed (an interrupt-out endpoint is also needed for CBI). The memory ++ * requirement amounts to two 16K buffers, size configurable by a parameter. ++ * Support is included for both full-speed and high-speed operation. ++ * ++ * Note that the driver is slightly non-portable in that it assumes a ++ * single memory/DMA buffer will be useable for bulk-in, bulk-out, and ++ * interrupt-in endpoints. With most device controllers this isn't an ++ * issue, but there may be some with hardware restrictions that prevent ++ * a buffer from being used by more than one endpoint. ++ * ++ * Module options: ++ * ++ * file=filename[,filename...] ++ * Required if "removable" is not set, names of ++ * the files or block devices used for ++ * backing storage ++ * serial=HHHH... Required serial number (string of hex chars) ++ * ro=b[,b...] Default false, booleans for read-only access ++ * removable Default false, boolean for removable media ++ * luns=N Default N = number of filenames, number of ++ * LUNs to support ++ * nofua=b[,b...] Default false, booleans for ignore FUA flag ++ * in SCSI WRITE(10,12) commands ++ * stall Default determined according to the type of ++ * USB device controller (usually true), ++ * boolean to permit the driver to halt ++ * bulk endpoints ++ * cdrom Default false, boolean for whether to emulate ++ * a CD-ROM drive ++ * transport=XXX Default BBB, transport name (CB, CBI, or BBB) ++ * protocol=YYY Default SCSI, protocol name (RBC, 8020 or ++ * ATAPI, QIC, UFI, 8070, or SCSI; ++ * also 1 - 6) ++ * vendor=0xVVVV Default 0x0525 (NetChip), USB Vendor ID ++ * product=0xPPPP Default 0xa4a5 (FSG), USB Product ID ++ * release=0xRRRR Override the USB release number (bcdDevice) ++ * buflen=N Default N=16384, buffer size used (will be ++ * rounded down to a multiple of ++ * PAGE_CACHE_SIZE) ++ * ++ * If CONFIG_USB_FILE_STORAGE_TEST is not set, only the "file", "serial", "ro", ++ * "removable", "luns", "nofua", "stall", and "cdrom" options are available; ++ * default values are used for everything else. ++ * ++ * The pathnames of the backing files and the ro settings are available in ++ * the attribute files "file", "nofua", and "ro" in the lun<n> subdirectory of ++ * the gadget's sysfs directory. If the "removable" option is set, writing to ++ * these files will simulate ejecting/loading the medium (writing an empty ++ * line means eject) and adjusting a write-enable tab. Changes to the ro ++ * setting are not allowed when the medium is loaded or if CD-ROM emulation ++ * is being used. ++ * ++ * This gadget driver is heavily based on "Gadget Zero" by David Brownell. ++ * The driver's SCSI command interface was based on the "Information ++ * technology - Small Computer System Interface - 2" document from ++ * X3T9.2 Project 375D, Revision 10L, 7-SEP-93, available at ++ * <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>. The single exception ++ * is opcode 0x23 (READ FORMAT CAPACITIES), which was based on the ++ * "Universal Serial Bus Mass Storage Class UFI Command Specification" ++ * document, Revision 1.0, December 14, 1998, available at ++ * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>. ++ */ ++ ++ ++/* ++ * Driver Design ++ * ++ * The FSG driver is fairly straightforward. There is a main kernel ++ * thread that handles most of the work. Interrupt routines field ++ * callbacks from the controller driver: bulk- and interrupt-request ++ * completion notifications, endpoint-0 events, and disconnect events. ++ * Completion events are passed to the main thread by wakeup calls. Many ++ * ep0 requests are handled at interrupt time, but SetInterface, ++ * SetConfiguration, and device reset requests are forwarded to the ++ * thread in the form of "exceptions" using SIGUSR1 signals (since they ++ * should interrupt any ongoing file I/O operations). ++ * ++ * The thread's main routine implements the standard command/data/status ++ * parts of a SCSI interaction. It and its subroutines are full of tests ++ * for pending signals/exceptions -- all this polling is necessary since ++ * the kernel has no setjmp/longjmp equivalents. (Maybe this is an ++ * indication that the driver really wants to be running in userspace.) ++ * An important point is that so long as the thread is alive it keeps an ++ * open reference to the backing file. This will prevent unmounting ++ * the backing file's underlying filesystem and could cause problems ++ * during system shutdown, for example. To prevent such problems, the ++ * thread catches INT, TERM, and KILL signals and converts them into ++ * an EXIT exception. ++ * ++ * In normal operation the main thread is started during the gadget's ++ * fsg_bind() callback and stopped during fsg_unbind(). But it can also ++ * exit when it receives a signal, and there's no point leaving the ++ * gadget running when the thread is dead. So just before the thread ++ * exits, it deregisters the gadget driver. This makes things a little ++ * tricky: The driver is deregistered at two places, and the exiting ++ * thread can indirectly call fsg_unbind() which in turn can tell the ++ * thread to exit. The first problem is resolved through the use of the ++ * REGISTERED atomic bitflag; the driver will only be deregistered once. ++ * The second problem is resolved by having fsg_unbind() check ++ * fsg->state; it won't try to stop the thread if the state is already ++ * FSG_STATE_TERMINATED. ++ * ++ * To provide maximum throughput, the driver uses a circular pipeline of ++ * buffer heads (struct fsg_buffhd). In principle the pipeline can be ++ * arbitrarily long; in practice the benefits don't justify having more ++ * than 2 stages (i.e., double buffering). But it helps to think of the ++ * pipeline as being a long one. Each buffer head contains a bulk-in and ++ * a bulk-out request pointer (since the buffer can be used for both ++ * output and input -- directions always are given from the host's ++ * point of view) as well as a pointer to the buffer and various state ++ * variables. ++ * ++ * Use of the pipeline follows a simple protocol. There is a variable ++ * (fsg->next_buffhd_to_fill) that points to the next buffer head to use. ++ * At any time that buffer head may still be in use from an earlier ++ * request, so each buffer head has a state variable indicating whether ++ * it is EMPTY, FULL, or BUSY. Typical use involves waiting for the ++ * buffer head to be EMPTY, filling the buffer either by file I/O or by ++ * USB I/O (during which the buffer head is BUSY), and marking the buffer ++ * head FULL when the I/O is complete. Then the buffer will be emptied ++ * (again possibly by USB I/O, during which it is marked BUSY) and ++ * finally marked EMPTY again (possibly by a completion routine). ++ * ++ * A module parameter tells the driver to avoid stalling the bulk ++ * endpoints wherever the transport specification allows. This is ++ * necessary for some UDCs like the SuperH, which cannot reliably clear a ++ * halt on a bulk endpoint. However, under certain circumstances the ++ * Bulk-only specification requires a stall. In such cases the driver ++ * will halt the endpoint and set a flag indicating that it should clear ++ * the halt in software during the next device reset. Hopefully this ++ * will permit everything to work correctly. Furthermore, although the ++ * specification allows the bulk-out endpoint to halt when the host sends ++ * too much data, implementing this would cause an unavoidable race. ++ * The driver will always use the "no-stall" approach for OUT transfers. ++ * ++ * One subtle point concerns sending status-stage responses for ep0 ++ * requests. Some of these requests, such as device reset, can involve ++ * interrupting an ongoing file I/O operation, which might take an ++ * arbitrarily long time. During that delay the host might give up on ++ * the original ep0 request and issue a new one. When that happens the ++ * driver should not notify the host about completion of the original ++ * request, as the host will no longer be waiting for it. So the driver ++ * assigns to each ep0 request a unique tag, and it keeps track of the ++ * tag value of the request associated with a long-running exception ++ * (device-reset, interface-change, or configuration-change). When the ++ * exception handler is finished, the status-stage response is submitted ++ * only if the current ep0 request tag is equal to the exception request ++ * tag. Thus only the most recently received ep0 request will get a ++ * status-stage response. ++ * ++ * Warning: This driver source file is too long. It ought to be split up ++ * into a header file plus about 3 separate .c files, to handle the details ++ * of the Gadget, USB Mass Storage, and SCSI protocols. ++ */ ++ ++ ++/* #define VERBOSE_DEBUG */ ++/* #define DUMP_MSGS */ ++ ++ ++#include <linux/blkdev.h> ++#include <linux/completion.h> ++#include <linux/dcache.h> ++#include <linux/delay.h> ++#include <linux/device.h> ++#include <linux/fcntl.h> ++#include <linux/file.h> ++#include <linux/fs.h> ++#include <linux/kref.h> ++#include <linux/kthread.h> ++#include <linux/limits.h> ++#include <linux/module.h> ++#include <linux/rwsem.h> ++#include <linux/slab.h> ++#include <linux/spinlock.h> ++#include <linux/string.h> ++#include <linux/freezer.h> ++#include <linux/utsname.h> ++ ++#include <linux/usb/ch9.h> ++#include <linux/usb/gadget.h> ++ ++#include "gadget_chips.h" ++ ++ ++ ++/* ++ * Kbuild is not very cooperative with respect to linking separately ++ * compiled library objects into one module. So for now we won't use ++ * separate compilation ... ensuring init/exit sections work to shrink ++ * the runtime footprint, and giving us at least some parts of what ++ * a "gcc --combine ... part1.c part2.c part3.c ... " build would. ++ */ ++#include "usbstring.c" ++#include "config.c" ++#include "epautoconf.c" ++ ++/*-------------------------------------------------------------------------*/ ++ ++#define DRIVER_DESC "File-backed Storage Gadget" ++#define DRIVER_NAME "g_file_storage" ++#define DRIVER_VERSION "1 September 2010" ++ ++static char fsg_string_manufacturer[64]; ++static const char fsg_string_product[] = DRIVER_DESC; ++static const char fsg_string_config[] = "Self-powered"; ++static const char fsg_string_interface[] = "Mass Storage"; ++ ++ ++#include "storage_common.c" ++ ++ ++MODULE_DESCRIPTION(DRIVER_DESC); ++MODULE_AUTHOR("Alan Stern"); ++MODULE_LICENSE("Dual BSD/GPL"); ++ ++/* ++ * This driver assumes self-powered hardware and has no way for users to ++ * trigger remote wakeup. It uses autoconfiguration to select endpoints ++ * and endpoint addresses. ++ */ ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++ ++/* Encapsulate the module parameter settings */ ++ ++static struct { ++ char *file[FSG_MAX_LUNS]; ++ char *serial; ++ bool ro[FSG_MAX_LUNS]; ++ bool nofua[FSG_MAX_LUNS]; ++ unsigned int num_filenames; ++ unsigned int num_ros; ++ unsigned int num_nofuas; ++ unsigned int nluns; ++ ++ bool removable; ++ bool can_stall; ++ bool cdrom; ++ ++ char *transport_parm; ++ char *protocol_parm; ++ unsigned short vendor; ++ unsigned short product; ++ unsigned short release; ++ unsigned int buflen; ++ ++ int transport_type; ++ char *transport_name; ++ int protocol_type; ++ char *protocol_name; ++ ++} mod_data = { // Default values ++ .transport_parm = "BBB", ++ .protocol_parm = "SCSI", ++ .removable = 0, ++ .can_stall = 1, ++ .cdrom = 0, ++ .vendor = FSG_VENDOR_ID, ++ .product = FSG_PRODUCT_ID, ++ .release = 0xffff, // Use controller chip type ++ .buflen = 16384, ++ }; ++ ++ ++module_param_array_named(file, mod_data.file, charp, &mod_data.num_filenames, ++ S_IRUGO); ++MODULE_PARM_DESC(file, "names of backing files or devices"); ++ ++module_param_named(serial, mod_data.serial, charp, S_IRUGO); ++MODULE_PARM_DESC(serial, "USB serial number"); ++ ++module_param_array_named(ro, mod_data.ro, bool, &mod_data.num_ros, S_IRUGO); ++MODULE_PARM_DESC(ro, "true to force read-only"); ++ ++module_param_array_named(nofua, mod_data.nofua, bool, &mod_data.num_nofuas, ++ S_IRUGO); ++MODULE_PARM_DESC(nofua, "true to ignore SCSI WRITE(10,12) FUA bit"); ++ ++module_param_named(luns, mod_data.nluns, uint, S_IRUGO); ++MODULE_PARM_DESC(luns, "number of LUNs"); ++ ++module_param_named(removable, mod_data.removable, bool, S_IRUGO); ++MODULE_PARM_DESC(removable, "true to simulate removable media"); ++ ++module_param_named(stall, mod_data.can_stall, bool, S_IRUGO); ++MODULE_PARM_DESC(stall, "false to prevent bulk stalls"); ++ ++module_param_named(cdrom, mod_data.cdrom, bool, S_IRUGO); ++MODULE_PARM_DESC(cdrom, "true to emulate cdrom instead of disk"); ++ ++/* In the non-TEST version, only the module parameters listed above ++ * are available. */ ++#ifdef CONFIG_USB_FILE_STORAGE_TEST ++ ++module_param_named(transport, mod_data.transport_parm, charp, S_IRUGO); ++MODULE_PARM_DESC(transport, "type of transport (BBB, CBI, or CB)"); ++ ++module_param_named(protocol, mod_data.protocol_parm, charp, S_IRUGO); ++MODULE_PARM_DESC(protocol, "type of protocol (RBC, 8020, QIC, UFI, " ++ "8070, or SCSI)"); ++ ++module_param_named(vendor, mod_data.vendor, ushort, S_IRUGO); ++MODULE_PARM_DESC(vendor, "USB Vendor ID"); ++ ++module_param_named(product, mod_data.product, ushort, S_IRUGO); ++MODULE_PARM_DESC(product, "USB Product ID"); ++ ++module_param_named(release, mod_data.release, ushort, S_IRUGO); ++MODULE_PARM_DESC(release, "USB release number"); ++ ++module_param_named(buflen, mod_data.buflen, uint, S_IRUGO); ++MODULE_PARM_DESC(buflen, "I/O buffer size"); ++ ++#endif /* CONFIG_USB_FILE_STORAGE_TEST */ ++ ++ ++/* ++ * These definitions will permit the compiler to avoid generating code for ++ * parts of the driver that aren't used in the non-TEST version. Even gcc ++ * can recognize when a test of a constant expression yields a dead code ++ * path. ++ */ ++ ++#ifdef CONFIG_USB_FILE_STORAGE_TEST ++ ++#define transport_is_bbb() (mod_data.transport_type == USB_PR_BULK) ++#define transport_is_cbi() (mod_data.transport_type == USB_PR_CBI) ++#define protocol_is_scsi() (mod_data.protocol_type == USB_SC_SCSI) ++ ++#else ++ ++#define transport_is_bbb() 1 ++#define transport_is_cbi() 0 ++#define protocol_is_scsi() 1 ++ ++#endif /* CONFIG_USB_FILE_STORAGE_TEST */ ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++ ++struct fsg_dev { ++ /* lock protects: state, all the req_busy's, and cbbuf_cmnd */ ++ spinlock_t lock; ++ struct usb_gadget *gadget; ++ ++ /* filesem protects: backing files in use */ ++ struct rw_semaphore filesem; ++ ++ /* reference counting: wait until all LUNs are released */ ++ struct kref ref; ++ ++ struct usb_ep *ep0; // Handy copy of gadget->ep0 ++ struct usb_request *ep0req; // For control responses ++ unsigned int ep0_req_tag; ++ const char *ep0req_name; ++ ++ struct usb_request *intreq; // For interrupt responses ++ int intreq_busy; ++ struct fsg_buffhd *intr_buffhd; ++ ++ unsigned int bulk_out_maxpacket; ++ enum fsg_state state; // For exception handling ++ unsigned int exception_req_tag; ++ ++ u8 config, new_config; ++ ++ unsigned int running : 1; ++ unsigned int bulk_in_enabled : 1; ++ unsigned int bulk_out_enabled : 1; ++ unsigned int intr_in_enabled : 1; ++ unsigned int phase_error : 1; ++ unsigned int short_packet_received : 1; ++ unsigned int bad_lun_okay : 1; ++ ++ unsigned long atomic_bitflags; ++#define REGISTERED 0 ++#define IGNORE_BULK_OUT 1 ++#define SUSPENDED 2 ++ ++ struct usb_ep *bulk_in; ++ struct usb_ep *bulk_out; ++ struct usb_ep *intr_in; ++ ++ struct fsg_buffhd *next_buffhd_to_fill; ++ struct fsg_buffhd *next_buffhd_to_drain; ++ ++ int thread_wakeup_needed; ++ struct completion thread_notifier; ++ struct task_struct *thread_task; ++ ++ int cmnd_size; ++ u8 cmnd[MAX_COMMAND_SIZE]; ++ enum data_direction data_dir; ++ u32 data_size; ++ u32 data_size_from_cmnd; ++ u32 tag; ++ unsigned int lun; ++ u32 residue; ++ u32 usb_amount_left; ++ ++ /* The CB protocol offers no way for a host to know when a command ++ * has completed. As a result the next command may arrive early, ++ * and we will still have to handle it. For that reason we need ++ * a buffer to store new commands when using CB (or CBI, which ++ * does not oblige a host to wait for command completion either). */ ++ int cbbuf_cmnd_size; ++ u8 cbbuf_cmnd[MAX_COMMAND_SIZE]; ++ ++ unsigned int nluns; ++ struct fsg_lun *luns; ++ struct fsg_lun *curlun; ++ /* Must be the last entry */ ++ struct fsg_buffhd buffhds[]; ++}; ++ ++typedef void (*fsg_routine_t)(struct fsg_dev *); ++ ++static int exception_in_progress(struct fsg_dev *fsg) ++{ ++ return (fsg->state > FSG_STATE_IDLE); ++} ++ ++/* Make bulk-out requests be divisible by the maxpacket size */ ++static void set_bulk_out_req_length(struct fsg_dev *fsg, ++ struct fsg_buffhd *bh, unsigned int length) ++{ ++ unsigned int rem; ++ ++ bh->bulk_out_intended_length = length; ++ rem = length % fsg->bulk_out_maxpacket; ++ if (rem > 0) ++ length += fsg->bulk_out_maxpacket - rem; ++ bh->outreq->length = length; ++} ++ ++static struct fsg_dev *the_fsg; ++static struct usb_gadget_driver fsg_driver; ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep) ++{ ++ const char *name; ++ ++ if (ep == fsg->bulk_in) ++ name = "bulk-in"; ++ else if (ep == fsg->bulk_out) ++ name = "bulk-out"; ++ else ++ name = ep->name; ++ DBG(fsg, "%s set halt\n", name); ++ return usb_ep_set_halt(ep); ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * DESCRIPTORS ... most are static, but strings and (full) configuration ++ * descriptors are built on demand. Also the (static) config and interface ++ * descriptors are adjusted during fsg_bind(). ++ */ ++ ++/* There is only one configuration. */ ++#define CONFIG_VALUE 1 ++ ++static struct usb_device_descriptor ++device_desc = { ++ .bLength = sizeof device_desc, ++ .bDescriptorType = USB_DT_DEVICE, ++ ++ .bcdUSB = cpu_to_le16(0x0200), ++ .bDeviceClass = USB_CLASS_PER_INTERFACE, ++ ++ /* The next three values can be overridden by module parameters */ ++ .idVendor = cpu_to_le16(FSG_VENDOR_ID), ++ .idProduct = cpu_to_le16(FSG_PRODUCT_ID), ++ .bcdDevice = cpu_to_le16(0xffff), ++ ++ .iManufacturer = FSG_STRING_MANUFACTURER, ++ .iProduct = FSG_STRING_PRODUCT, ++ .iSerialNumber = FSG_STRING_SERIAL, ++ .bNumConfigurations = 1, ++}; ++ ++static struct usb_config_descriptor ++config_desc = { ++ .bLength = sizeof config_desc, ++ .bDescriptorType = USB_DT_CONFIG, ++ ++ /* wTotalLength computed by usb_gadget_config_buf() */ ++ .bNumInterfaces = 1, ++ .bConfigurationValue = CONFIG_VALUE, ++ .iConfiguration = FSG_STRING_CONFIG, ++ .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, ++ .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2, ++}; ++ ++ ++static struct usb_qualifier_descriptor ++dev_qualifier = { ++ .bLength = sizeof dev_qualifier, ++ .bDescriptorType = USB_DT_DEVICE_QUALIFIER, ++ ++ .bcdUSB = cpu_to_le16(0x0200), ++ .bDeviceClass = USB_CLASS_PER_INTERFACE, ++ ++ .bNumConfigurations = 1, ++}; ++ ++static int populate_bos(struct fsg_dev *fsg, u8 *buf) ++{ ++ memcpy(buf, &fsg_bos_desc, USB_DT_BOS_SIZE); ++ buf += USB_DT_BOS_SIZE; ++ ++ memcpy(buf, &fsg_ext_cap_desc, USB_DT_USB_EXT_CAP_SIZE); ++ buf += USB_DT_USB_EXT_CAP_SIZE; ++ ++ memcpy(buf, &fsg_ss_cap_desc, USB_DT_USB_SS_CAP_SIZE); ++ ++ return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE ++ + USB_DT_USB_EXT_CAP_SIZE; ++} ++ ++/* ++ * Config descriptors must agree with the code that sets configurations ++ * and with code managing interfaces and their altsettings. They must ++ * also handle different speeds and other-speed requests. ++ */ ++static int populate_config_buf(struct usb_gadget *gadget, ++ u8 *buf, u8 type, unsigned index) ++{ ++ enum usb_device_speed speed = gadget->speed; ++ int len; ++ const struct usb_descriptor_header **function; ++ ++ if (index > 0) ++ return -EINVAL; ++ ++ if (gadget_is_dualspeed(gadget) && type == USB_DT_OTHER_SPEED_CONFIG) ++ speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed; ++ function = gadget_is_dualspeed(gadget) && speed == USB_SPEED_HIGH ++ ? (const struct usb_descriptor_header **)fsg_hs_function ++ : (const struct usb_descriptor_header **)fsg_fs_function; ++ ++ /* for now, don't advertise srp-only devices */ ++ if (!gadget_is_otg(gadget)) ++ function++; ++ ++ len = usb_gadget_config_buf(&config_desc, buf, EP0_BUFSIZE, function); ++ ((struct usb_config_descriptor *) buf)->bDescriptorType = type; ++ return len; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* These routines may be called in process context or in_irq */ ++ ++/* Caller must hold fsg->lock */ ++static void wakeup_thread(struct fsg_dev *fsg) ++{ ++ /* Tell the main thread that something has happened */ ++ fsg->thread_wakeup_needed = 1; ++ if (fsg->thread_task) ++ wake_up_process(fsg->thread_task); ++} ++ ++ ++static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state) ++{ ++ unsigned long flags; ++ ++ /* Do nothing if a higher-priority exception is already in progress. ++ * If a lower-or-equal priority exception is in progress, preempt it ++ * and notify the main thread by sending it a signal. */ ++ spin_lock_irqsave(&fsg->lock, flags); ++ if (fsg->state <= new_state) { ++ fsg->exception_req_tag = fsg->ep0_req_tag; ++ fsg->state = new_state; ++ if (fsg->thread_task) ++ send_sig_info(SIGUSR1, SEND_SIG_FORCED, ++ fsg->thread_task); ++ } ++ spin_unlock_irqrestore(&fsg->lock, flags); ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* The disconnect callback and ep0 routines. These always run in_irq, ++ * except that ep0_queue() is called in the main thread to acknowledge ++ * completion of various requests: set config, set interface, and ++ * Bulk-only device reset. */ ++ ++static void fsg_disconnect(struct usb_gadget *gadget) ++{ ++ struct fsg_dev *fsg = get_gadget_data(gadget); ++ ++ DBG(fsg, "disconnect or port reset\n"); ++ raise_exception(fsg, FSG_STATE_DISCONNECT); ++} ++ ++ ++static int ep0_queue(struct fsg_dev *fsg) ++{ ++ int rc; ++ ++ rc = usb_ep_queue(fsg->ep0, fsg->ep0req, GFP_ATOMIC); ++ if (rc != 0 && rc != -ESHUTDOWN) { ++ ++ /* We can't do much more than wait for a reset */ ++ WARNING(fsg, "error in submission: %s --> %d\n", ++ fsg->ep0->name, rc); ++ } ++ return rc; ++} ++ ++static void ep0_complete(struct usb_ep *ep, struct usb_request *req) ++{ ++ struct fsg_dev *fsg = ep->driver_data; ++ ++ if (req->actual > 0) ++ dump_msg(fsg, fsg->ep0req_name, req->buf, req->actual); ++ if (req->status || req->actual != req->length) ++ DBG(fsg, "%s --> %d, %u/%u\n", __func__, ++ req->status, req->actual, req->length); ++ if (req->status == -ECONNRESET) // Request was cancelled ++ usb_ep_fifo_flush(ep); ++ ++ if (req->status == 0 && req->context) ++ ((fsg_routine_t) (req->context))(fsg); ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* Bulk and interrupt endpoint completion handlers. ++ * These always run in_irq. */ ++ ++static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req) ++{ ++ struct fsg_dev *fsg = ep->driver_data; ++ struct fsg_buffhd *bh = req->context; ++ ++ if (req->status || req->actual != req->length) ++ DBG(fsg, "%s --> %d, %u/%u\n", __func__, ++ req->status, req->actual, req->length); ++ if (req->status == -ECONNRESET) // Request was cancelled ++ usb_ep_fifo_flush(ep); ++ ++ /* Hold the lock while we update the request and buffer states */ ++ smp_wmb(); ++ spin_lock(&fsg->lock); ++ bh->inreq_busy = 0; ++ bh->state = BUF_STATE_EMPTY; ++ wakeup_thread(fsg); ++ spin_unlock(&fsg->lock); ++} ++ ++static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req) ++{ ++ struct fsg_dev *fsg = ep->driver_data; ++ struct fsg_buffhd *bh = req->context; ++ ++ dump_msg(fsg, "bulk-out", req->buf, req->actual); ++ if (req->status || req->actual != bh->bulk_out_intended_length) ++ DBG(fsg, "%s --> %d, %u/%u\n", __func__, ++ req->status, req->actual, ++ bh->bulk_out_intended_length); ++ if (req->status == -ECONNRESET) // Request was cancelled ++ usb_ep_fifo_flush(ep); ++ ++ /* Hold the lock while we update the request and buffer states */ ++ smp_wmb(); ++ spin_lock(&fsg->lock); ++ bh->outreq_busy = 0; ++ bh->state = BUF_STATE_FULL; ++ wakeup_thread(fsg); ++ spin_unlock(&fsg->lock); ++} ++ ++ ++#ifdef CONFIG_USB_FILE_STORAGE_TEST ++static void intr_in_complete(struct usb_ep *ep, struct usb_request *req) ++{ ++ struct fsg_dev *fsg = ep->driver_data; ++ struct fsg_buffhd *bh = req->context; ++ ++ if (req->status || req->actual != req->length) ++ DBG(fsg, "%s --> %d, %u/%u\n", __func__, ++ req->status, req->actual, req->length); ++ if (req->status == -ECONNRESET) // Request was cancelled ++ usb_ep_fifo_flush(ep); ++ ++ /* Hold the lock while we update the request and buffer states */ ++ smp_wmb(); ++ spin_lock(&fsg->lock); ++ fsg->intreq_busy = 0; ++ bh->state = BUF_STATE_EMPTY; ++ wakeup_thread(fsg); ++ spin_unlock(&fsg->lock); ++} ++ ++#else ++static void intr_in_complete(struct usb_ep *ep, struct usb_request *req) ++{} ++#endif /* CONFIG_USB_FILE_STORAGE_TEST */ ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* Ep0 class-specific handlers. These always run in_irq. */ ++ ++#ifdef CONFIG_USB_FILE_STORAGE_TEST ++static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ struct usb_request *req = fsg->ep0req; ++ static u8 cbi_reset_cmnd[6] = { ++ SEND_DIAGNOSTIC, 4, 0xff, 0xff, 0xff, 0xff}; ++ ++ /* Error in command transfer? */ ++ if (req->status || req->length != req->actual || ++ req->actual < 6 || req->actual > MAX_COMMAND_SIZE) { ++ ++ /* Not all controllers allow a protocol stall after ++ * receiving control-out data, but we'll try anyway. */ ++ fsg_set_halt(fsg, fsg->ep0); ++ return; // Wait for reset ++ } ++ ++ /* Is it the special reset command? */ ++ if (req->actual >= sizeof cbi_reset_cmnd && ++ memcmp(req->buf, cbi_reset_cmnd, ++ sizeof cbi_reset_cmnd) == 0) { ++ ++ /* Raise an exception to stop the current operation ++ * and reinitialize our state. */ ++ DBG(fsg, "cbi reset request\n"); ++ raise_exception(fsg, FSG_STATE_RESET); ++ return; ++ } ++ ++ VDBG(fsg, "CB[I] accept device-specific command\n"); ++ spin_lock(&fsg->lock); ++ ++ /* Save the command for later */ ++ if (fsg->cbbuf_cmnd_size) ++ WARNING(fsg, "CB[I] overwriting previous command\n"); ++ fsg->cbbuf_cmnd_size = req->actual; ++ memcpy(fsg->cbbuf_cmnd, req->buf, fsg->cbbuf_cmnd_size); ++ ++ wakeup_thread(fsg); ++ spin_unlock(&fsg->lock); ++} ++ ++#else ++static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{} ++#endif /* CONFIG_USB_FILE_STORAGE_TEST */ ++ ++ ++static int class_setup_req(struct fsg_dev *fsg, ++ const struct usb_ctrlrequest *ctrl) ++{ ++ struct usb_request *req = fsg->ep0req; ++ int value = -EOPNOTSUPP; ++ u16 w_index = le16_to_cpu(ctrl->wIndex); ++ u16 w_value = le16_to_cpu(ctrl->wValue); ++ u16 w_length = le16_to_cpu(ctrl->wLength); ++ ++ if (!fsg->config) ++ return value; ++ ++ /* Handle Bulk-only class-specific requests */ ++ if (transport_is_bbb()) { ++ switch (ctrl->bRequest) { ++ ++ case US_BULK_RESET_REQUEST: ++ if (ctrl->bRequestType != (USB_DIR_OUT | ++ USB_TYPE_CLASS | USB_RECIP_INTERFACE)) ++ break; ++ if (w_index != 0 || w_value != 0 || w_length != 0) { ++ value = -EDOM; ++ break; ++ } ++ ++ /* Raise an exception to stop the current operation ++ * and reinitialize our state. */ ++ DBG(fsg, "bulk reset request\n"); ++ raise_exception(fsg, FSG_STATE_RESET); ++ value = DELAYED_STATUS; ++ break; ++ ++ case US_BULK_GET_MAX_LUN: ++ if (ctrl->bRequestType != (USB_DIR_IN | ++ USB_TYPE_CLASS | USB_RECIP_INTERFACE)) ++ break; ++ if (w_index != 0 || w_value != 0 || w_length != 1) { ++ value = -EDOM; ++ break; ++ } ++ VDBG(fsg, "get max LUN\n"); ++ *(u8 *) req->buf = fsg->nluns - 1; ++ value = 1; ++ break; ++ } ++ } ++ ++ /* Handle CBI class-specific requests */ ++ else { ++ switch (ctrl->bRequest) { ++ ++ case USB_CBI_ADSC_REQUEST: ++ if (ctrl->bRequestType != (USB_DIR_OUT | ++ USB_TYPE_CLASS | USB_RECIP_INTERFACE)) ++ break; ++ if (w_index != 0 || w_value != 0) { ++ value = -EDOM; ++ break; ++ } ++ if (w_length > MAX_COMMAND_SIZE) { ++ value = -EOVERFLOW; ++ break; ++ } ++ value = w_length; ++ fsg->ep0req->context = received_cbi_adsc; ++ break; ++ } ++ } ++ ++ if (value == -EOPNOTSUPP) ++ VDBG(fsg, ++ "unknown class-specific control req " ++ "%02x.%02x v%04x i%04x l%u\n", ++ ctrl->bRequestType, ctrl->bRequest, ++ le16_to_cpu(ctrl->wValue), w_index, w_length); ++ return value; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* Ep0 standard request handlers. These always run in_irq. */ ++ ++static int standard_setup_req(struct fsg_dev *fsg, ++ const struct usb_ctrlrequest *ctrl) ++{ ++ struct usb_request *req = fsg->ep0req; ++ int value = -EOPNOTSUPP; ++ u16 w_index = le16_to_cpu(ctrl->wIndex); ++ u16 w_value = le16_to_cpu(ctrl->wValue); ++ ++ /* Usually this just stores reply data in the pre-allocated ep0 buffer, ++ * but config change events will also reconfigure hardware. */ ++ switch (ctrl->bRequest) { ++ ++ case USB_REQ_GET_DESCRIPTOR: ++ if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | ++ USB_RECIP_DEVICE)) ++ break; ++ switch (w_value >> 8) { ++ ++ case USB_DT_DEVICE: ++ VDBG(fsg, "get device descriptor\n"); ++ device_desc.bMaxPacketSize0 = fsg->ep0->maxpacket; ++ value = sizeof device_desc; ++ memcpy(req->buf, &device_desc, value); ++ break; ++ case USB_DT_DEVICE_QUALIFIER: ++ VDBG(fsg, "get device qualifier\n"); ++ if (!gadget_is_dualspeed(fsg->gadget) || ++ fsg->gadget->speed == USB_SPEED_SUPER) ++ break; ++ /* ++ * Assume ep0 uses the same maxpacket value for both ++ * speeds ++ */ ++ dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket; ++ value = sizeof dev_qualifier; ++ memcpy(req->buf, &dev_qualifier, value); ++ break; ++ ++ case USB_DT_OTHER_SPEED_CONFIG: ++ VDBG(fsg, "get other-speed config descriptor\n"); ++ if (!gadget_is_dualspeed(fsg->gadget) || ++ fsg->gadget->speed == USB_SPEED_SUPER) ++ break; ++ goto get_config; ++ case USB_DT_CONFIG: ++ VDBG(fsg, "get configuration descriptor\n"); ++get_config: ++ value = populate_config_buf(fsg->gadget, ++ req->buf, ++ w_value >> 8, ++ w_value & 0xff); ++ break; ++ ++ case USB_DT_STRING: ++ VDBG(fsg, "get string descriptor\n"); ++ ++ /* wIndex == language code */ ++ value = usb_gadget_get_string(&fsg_stringtab, ++ w_value & 0xff, req->buf); ++ break; ++ ++ case USB_DT_BOS: ++ VDBG(fsg, "get bos descriptor\n"); ++ ++ if (gadget_is_superspeed(fsg->gadget)) ++ value = populate_bos(fsg, req->buf); ++ break; ++ } ++ ++ break; ++ ++ /* One config, two speeds */ ++ case USB_REQ_SET_CONFIGURATION: ++ if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD | ++ USB_RECIP_DEVICE)) ++ break; ++ VDBG(fsg, "set configuration\n"); ++ if (w_value == CONFIG_VALUE || w_value == 0) { ++ fsg->new_config = w_value; ++ ++ /* Raise an exception to wipe out previous transaction ++ * state (queued bufs, etc) and set the new config. */ ++ raise_exception(fsg, FSG_STATE_CONFIG_CHANGE); ++ value = DELAYED_STATUS; ++ } ++ break; ++ case USB_REQ_GET_CONFIGURATION: ++ if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | ++ USB_RECIP_DEVICE)) ++ break; ++ VDBG(fsg, "get configuration\n"); ++ *(u8 *) req->buf = fsg->config; ++ value = 1; ++ break; ++ ++ case USB_REQ_SET_INTERFACE: ++ if (ctrl->bRequestType != (USB_DIR_OUT| USB_TYPE_STANDARD | ++ USB_RECIP_INTERFACE)) ++ break; ++ if (fsg->config && w_index == 0) { ++ ++ /* Raise an exception to wipe out previous transaction ++ * state (queued bufs, etc) and install the new ++ * interface altsetting. */ ++ raise_exception(fsg, FSG_STATE_INTERFACE_CHANGE); ++ value = DELAYED_STATUS; ++ } ++ break; ++ case USB_REQ_GET_INTERFACE: ++ if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | ++ USB_RECIP_INTERFACE)) ++ break; ++ if (!fsg->config) ++ break; ++ if (w_index != 0) { ++ value = -EDOM; ++ break; ++ } ++ VDBG(fsg, "get interface\n"); ++ *(u8 *) req->buf = 0; ++ value = 1; ++ break; ++ ++ default: ++ VDBG(fsg, ++ "unknown control req %02x.%02x v%04x i%04x l%u\n", ++ ctrl->bRequestType, ctrl->bRequest, ++ w_value, w_index, le16_to_cpu(ctrl->wLength)); ++ } ++ ++ return value; ++} ++ ++ ++static int fsg_setup(struct usb_gadget *gadget, ++ const struct usb_ctrlrequest *ctrl) ++{ ++ struct fsg_dev *fsg = get_gadget_data(gadget); ++ int rc; ++ int w_length = le16_to_cpu(ctrl->wLength); ++ ++ ++fsg->ep0_req_tag; // Record arrival of a new request ++ fsg->ep0req->context = NULL; ++ fsg->ep0req->length = 0; ++ dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl)); ++ ++ if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS) ++ rc = class_setup_req(fsg, ctrl); ++ else ++ rc = standard_setup_req(fsg, ctrl); ++ ++ /* Respond with data/status or defer until later? */ ++ if (rc >= 0 && rc != DELAYED_STATUS) { ++ rc = min(rc, w_length); ++ fsg->ep0req->length = rc; ++ fsg->ep0req->zero = rc < w_length; ++ fsg->ep0req_name = (ctrl->bRequestType & USB_DIR_IN ? ++ "ep0-in" : "ep0-out"); ++ rc = ep0_queue(fsg); ++ } ++ ++ /* Device either stalls (rc < 0) or reports success */ ++ return rc; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* All the following routines run in process context */ ++ ++ ++/* Use this for bulk or interrupt transfers, not ep0 */ ++static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep, ++ struct usb_request *req, int *pbusy, ++ enum fsg_buffer_state *state) ++{ ++ int rc; ++ ++ if (ep == fsg->bulk_in) ++ dump_msg(fsg, "bulk-in", req->buf, req->length); ++ else if (ep == fsg->intr_in) ++ dump_msg(fsg, "intr-in", req->buf, req->length); ++ ++ spin_lock_irq(&fsg->lock); ++ *pbusy = 1; ++ *state = BUF_STATE_BUSY; ++ spin_unlock_irq(&fsg->lock); ++ rc = usb_ep_queue(ep, req, GFP_KERNEL); ++ if (rc != 0) { ++ *pbusy = 0; ++ *state = BUF_STATE_EMPTY; ++ ++ /* We can't do much more than wait for a reset */ ++ ++ /* Note: currently the net2280 driver fails zero-length ++ * submissions if DMA is enabled. */ ++ if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP && ++ req->length == 0)) ++ WARNING(fsg, "error in submission: %s --> %d\n", ++ ep->name, rc); ++ } ++} ++ ++ ++static int sleep_thread(struct fsg_dev *fsg) ++{ ++ int rc = 0; ++ ++ /* Wait until a signal arrives or we are woken up */ ++ for (;;) { ++ try_to_freeze(); ++ set_current_state(TASK_INTERRUPTIBLE); ++ if (signal_pending(current)) { ++ rc = -EINTR; ++ break; ++ } ++ if (fsg->thread_wakeup_needed) ++ break; ++ schedule(); ++ } ++ __set_current_state(TASK_RUNNING); ++ fsg->thread_wakeup_needed = 0; ++ return rc; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int do_read(struct fsg_dev *fsg) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ u32 lba; ++ struct fsg_buffhd *bh; ++ int rc; ++ u32 amount_left; ++ loff_t file_offset, file_offset_tmp; ++ unsigned int amount; ++ ssize_t nread; ++ ++ /* Get the starting Logical Block Address and check that it's ++ * not too big */ ++ if (fsg->cmnd[0] == READ_6) ++ lba = get_unaligned_be24(&fsg->cmnd[1]); ++ else { ++ lba = get_unaligned_be32(&fsg->cmnd[2]); ++ ++ /* We allow DPO (Disable Page Out = don't save data in the ++ * cache) and FUA (Force Unit Access = don't read from the ++ * cache), but we don't implement them. */ ++ if ((fsg->cmnd[1] & ~0x18) != 0) { ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ } ++ if (lba >= curlun->num_sectors) { ++ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; ++ return -EINVAL; ++ } ++ file_offset = ((loff_t) lba) << curlun->blkbits; ++ ++ /* Carry out the file reads */ ++ amount_left = fsg->data_size_from_cmnd; ++ if (unlikely(amount_left == 0)) ++ return -EIO; // No default reply ++ ++ for (;;) { ++ ++ /* Figure out how much we need to read: ++ * Try to read the remaining amount. ++ * But don't read more than the buffer size. ++ * And don't try to read past the end of the file. ++ */ ++ amount = min((unsigned int) amount_left, mod_data.buflen); ++ amount = min((loff_t) amount, ++ curlun->file_length - file_offset); ++ ++ /* Wait for the next buffer to become available */ ++ bh = fsg->next_buffhd_to_fill; ++ while (bh->state != BUF_STATE_EMPTY) { ++ rc = sleep_thread(fsg); ++ if (rc) ++ return rc; ++ } ++ ++ /* If we were asked to read past the end of file, ++ * end with an empty buffer. */ ++ if (amount == 0) { ++ curlun->sense_data = ++ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; ++ curlun->sense_data_info = file_offset >> curlun->blkbits; ++ curlun->info_valid = 1; ++ bh->inreq->length = 0; ++ bh->state = BUF_STATE_FULL; ++ break; ++ } ++ ++ /* Perform the read */ ++ file_offset_tmp = file_offset; ++ nread = vfs_read(curlun->filp, ++ (char __user *) bh->buf, ++ amount, &file_offset_tmp); ++ VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, ++ (unsigned long long) file_offset, ++ (int) nread); ++ if (signal_pending(current)) ++ return -EINTR; ++ ++ if (nread < 0) { ++ LDBG(curlun, "error in file read: %d\n", ++ (int) nread); ++ nread = 0; ++ } else if (nread < amount) { ++ LDBG(curlun, "partial file read: %d/%u\n", ++ (int) nread, amount); ++ nread = round_down(nread, curlun->blksize); ++ } ++ file_offset += nread; ++ amount_left -= nread; ++ fsg->residue -= nread; ++ ++ /* Except at the end of the transfer, nread will be ++ * equal to the buffer size, which is divisible by the ++ * bulk-in maxpacket size. ++ */ ++ bh->inreq->length = nread; ++ bh->state = BUF_STATE_FULL; ++ ++ /* If an error occurred, report it and its position */ ++ if (nread < amount) { ++ curlun->sense_data = SS_UNRECOVERED_READ_ERROR; ++ curlun->sense_data_info = file_offset >> curlun->blkbits; ++ curlun->info_valid = 1; ++ break; ++ } ++ ++ if (amount_left == 0) ++ break; // No more left to read ++ ++ /* Send this buffer and go read some more */ ++ bh->inreq->zero = 0; ++ start_transfer(fsg, fsg->bulk_in, bh->inreq, ++ &bh->inreq_busy, &bh->state); ++ fsg->next_buffhd_to_fill = bh->next; ++ } ++ ++ return -EIO; // No default reply ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int do_write(struct fsg_dev *fsg) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ u32 lba; ++ struct fsg_buffhd *bh; ++ int get_some_more; ++ u32 amount_left_to_req, amount_left_to_write; ++ loff_t usb_offset, file_offset, file_offset_tmp; ++ unsigned int amount; ++ ssize_t nwritten; ++ int rc; ++ ++ if (curlun->ro) { ++ curlun->sense_data = SS_WRITE_PROTECTED; ++ return -EINVAL; ++ } ++ spin_lock(&curlun->filp->f_lock); ++ curlun->filp->f_flags &= ~O_SYNC; // Default is not to wait ++ spin_unlock(&curlun->filp->f_lock); ++ ++ /* Get the starting Logical Block Address and check that it's ++ * not too big */ ++ if (fsg->cmnd[0] == WRITE_6) ++ lba = get_unaligned_be24(&fsg->cmnd[1]); ++ else { ++ lba = get_unaligned_be32(&fsg->cmnd[2]); ++ ++ /* We allow DPO (Disable Page Out = don't save data in the ++ * cache) and FUA (Force Unit Access = write directly to the ++ * medium). We don't implement DPO; we implement FUA by ++ * performing synchronous output. */ ++ if ((fsg->cmnd[1] & ~0x18) != 0) { ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ /* FUA */ ++ if (!curlun->nofua && (fsg->cmnd[1] & 0x08)) { ++ spin_lock(&curlun->filp->f_lock); ++ curlun->filp->f_flags |= O_DSYNC; ++ spin_unlock(&curlun->filp->f_lock); ++ } ++ } ++ if (lba >= curlun->num_sectors) { ++ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; ++ return -EINVAL; ++ } ++ ++ /* Carry out the file writes */ ++ get_some_more = 1; ++ file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits; ++ amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd; ++ ++ while (amount_left_to_write > 0) { ++ ++ /* Queue a request for more data from the host */ ++ bh = fsg->next_buffhd_to_fill; ++ if (bh->state == BUF_STATE_EMPTY && get_some_more) { ++ ++ /* Figure out how much we want to get: ++ * Try to get the remaining amount, ++ * but not more than the buffer size. ++ */ ++ amount = min(amount_left_to_req, mod_data.buflen); ++ ++ /* Beyond the end of the backing file? */ ++ if (usb_offset >= curlun->file_length) { ++ get_some_more = 0; ++ curlun->sense_data = ++ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; ++ curlun->sense_data_info = usb_offset >> curlun->blkbits; ++ curlun->info_valid = 1; ++ continue; ++ } ++ ++ /* Get the next buffer */ ++ usb_offset += amount; ++ fsg->usb_amount_left -= amount; ++ amount_left_to_req -= amount; ++ if (amount_left_to_req == 0) ++ get_some_more = 0; ++ ++ /* Except at the end of the transfer, amount will be ++ * equal to the buffer size, which is divisible by ++ * the bulk-out maxpacket size. ++ */ ++ set_bulk_out_req_length(fsg, bh, amount); ++ start_transfer(fsg, fsg->bulk_out, bh->outreq, ++ &bh->outreq_busy, &bh->state); ++ fsg->next_buffhd_to_fill = bh->next; ++ continue; ++ } ++ ++ /* Write the received data to the backing file */ ++ bh = fsg->next_buffhd_to_drain; ++ if (bh->state == BUF_STATE_EMPTY && !get_some_more) ++ break; // We stopped early ++ if (bh->state == BUF_STATE_FULL) { ++ smp_rmb(); ++ fsg->next_buffhd_to_drain = bh->next; ++ bh->state = BUF_STATE_EMPTY; ++ ++ /* Did something go wrong with the transfer? */ ++ if (bh->outreq->status != 0) { ++ curlun->sense_data = SS_COMMUNICATION_FAILURE; ++ curlun->sense_data_info = file_offset >> curlun->blkbits; ++ curlun->info_valid = 1; ++ break; ++ } ++ ++ amount = bh->outreq->actual; ++ if (curlun->file_length - file_offset < amount) { ++ LERROR(curlun, ++ "write %u @ %llu beyond end %llu\n", ++ amount, (unsigned long long) file_offset, ++ (unsigned long long) curlun->file_length); ++ amount = curlun->file_length - file_offset; ++ } ++ ++ /* Don't accept excess data. The spec doesn't say ++ * what to do in this case. We'll ignore the error. ++ */ ++ amount = min(amount, bh->bulk_out_intended_length); ++ ++ /* Don't write a partial block */ ++ amount = round_down(amount, curlun->blksize); ++ if (amount == 0) ++ goto empty_write; ++ ++ /* Perform the write */ ++ file_offset_tmp = file_offset; ++ nwritten = vfs_write(curlun->filp, ++ (char __user *) bh->buf, ++ amount, &file_offset_tmp); ++ VLDBG(curlun, "file write %u @ %llu -> %d\n", amount, ++ (unsigned long long) file_offset, ++ (int) nwritten); ++ if (signal_pending(current)) ++ return -EINTR; // Interrupted! ++ ++ if (nwritten < 0) { ++ LDBG(curlun, "error in file write: %d\n", ++ (int) nwritten); ++ nwritten = 0; ++ } else if (nwritten < amount) { ++ LDBG(curlun, "partial file write: %d/%u\n", ++ (int) nwritten, amount); ++ nwritten = round_down(nwritten, curlun->blksize); ++ } ++ file_offset += nwritten; ++ amount_left_to_write -= nwritten; ++ fsg->residue -= nwritten; ++ ++ /* If an error occurred, report it and its position */ ++ if (nwritten < amount) { ++ curlun->sense_data = SS_WRITE_ERROR; ++ curlun->sense_data_info = file_offset >> curlun->blkbits; ++ curlun->info_valid = 1; ++ break; ++ } ++ ++ empty_write: ++ /* Did the host decide to stop early? */ ++ if (bh->outreq->actual < bh->bulk_out_intended_length) { ++ fsg->short_packet_received = 1; ++ break; ++ } ++ continue; ++ } ++ ++ /* Wait for something to happen */ ++ rc = sleep_thread(fsg); ++ if (rc) ++ return rc; ++ } ++ ++ return -EIO; // No default reply ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int do_synchronize_cache(struct fsg_dev *fsg) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ int rc; ++ ++ /* We ignore the requested LBA and write out all file's ++ * dirty data buffers. */ ++ rc = fsg_lun_fsync_sub(curlun); ++ if (rc) ++ curlun->sense_data = SS_WRITE_ERROR; ++ return 0; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void invalidate_sub(struct fsg_lun *curlun) ++{ ++ struct file *filp = curlun->filp; ++ struct inode *inode = filp->f_path.dentry->d_inode; ++ unsigned long rc; ++ ++ rc = invalidate_mapping_pages(inode->i_mapping, 0, -1); ++ VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc); ++} ++ ++static int do_verify(struct fsg_dev *fsg) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ u32 lba; ++ u32 verification_length; ++ struct fsg_buffhd *bh = fsg->next_buffhd_to_fill; ++ loff_t file_offset, file_offset_tmp; ++ u32 amount_left; ++ unsigned int amount; ++ ssize_t nread; ++ ++ /* Get the starting Logical Block Address and check that it's ++ * not too big */ ++ lba = get_unaligned_be32(&fsg->cmnd[2]); ++ if (lba >= curlun->num_sectors) { ++ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; ++ return -EINVAL; ++ } ++ ++ /* We allow DPO (Disable Page Out = don't save data in the ++ * cache) but we don't implement it. */ ++ if ((fsg->cmnd[1] & ~0x10) != 0) { ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ ++ verification_length = get_unaligned_be16(&fsg->cmnd[7]); ++ if (unlikely(verification_length == 0)) ++ return -EIO; // No default reply ++ ++ /* Prepare to carry out the file verify */ ++ amount_left = verification_length << curlun->blkbits; ++ file_offset = ((loff_t) lba) << curlun->blkbits; ++ ++ /* Write out all the dirty buffers before invalidating them */ ++ fsg_lun_fsync_sub(curlun); ++ if (signal_pending(current)) ++ return -EINTR; ++ ++ invalidate_sub(curlun); ++ if (signal_pending(current)) ++ return -EINTR; ++ ++ /* Just try to read the requested blocks */ ++ while (amount_left > 0) { ++ ++ /* Figure out how much we need to read: ++ * Try to read the remaining amount, but not more than ++ * the buffer size. ++ * And don't try to read past the end of the file. ++ */ ++ amount = min((unsigned int) amount_left, mod_data.buflen); ++ amount = min((loff_t) amount, ++ curlun->file_length - file_offset); ++ if (amount == 0) { ++ curlun->sense_data = ++ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; ++ curlun->sense_data_info = file_offset >> curlun->blkbits; ++ curlun->info_valid = 1; ++ break; ++ } ++ ++ /* Perform the read */ ++ file_offset_tmp = file_offset; ++ nread = vfs_read(curlun->filp, ++ (char __user *) bh->buf, ++ amount, &file_offset_tmp); ++ VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, ++ (unsigned long long) file_offset, ++ (int) nread); ++ if (signal_pending(current)) ++ return -EINTR; ++ ++ if (nread < 0) { ++ LDBG(curlun, "error in file verify: %d\n", ++ (int) nread); ++ nread = 0; ++ } else if (nread < amount) { ++ LDBG(curlun, "partial file verify: %d/%u\n", ++ (int) nread, amount); ++ nread = round_down(nread, curlun->blksize); ++ } ++ if (nread == 0) { ++ curlun->sense_data = SS_UNRECOVERED_READ_ERROR; ++ curlun->sense_data_info = file_offset >> curlun->blkbits; ++ curlun->info_valid = 1; ++ break; ++ } ++ file_offset += nread; ++ amount_left -= nread; ++ } ++ return 0; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int do_inquiry(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ u8 *buf = (u8 *) bh->buf; ++ ++ static char vendor_id[] = "Linux "; ++ static char product_disk_id[] = "File-Stor Gadget"; ++ static char product_cdrom_id[] = "File-CD Gadget "; ++ ++ if (!fsg->curlun) { // Unsupported LUNs are okay ++ fsg->bad_lun_okay = 1; ++ memset(buf, 0, 36); ++ buf[0] = 0x7f; // Unsupported, no device-type ++ buf[4] = 31; // Additional length ++ return 36; ++ } ++ ++ memset(buf, 0, 8); ++ buf[0] = (mod_data.cdrom ? TYPE_ROM : TYPE_DISK); ++ if (mod_data.removable) ++ buf[1] = 0x80; ++ buf[2] = 2; // ANSI SCSI level 2 ++ buf[3] = 2; // SCSI-2 INQUIRY data format ++ buf[4] = 31; // Additional length ++ // No special options ++ sprintf(buf + 8, "%-8s%-16s%04x", vendor_id, ++ (mod_data.cdrom ? product_cdrom_id : ++ product_disk_id), ++ mod_data.release); ++ return 36; ++} ++ ++ ++static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ u8 *buf = (u8 *) bh->buf; ++ u32 sd, sdinfo; ++ int valid; ++ ++ /* ++ * From the SCSI-2 spec., section 7.9 (Unit attention condition): ++ * ++ * If a REQUEST SENSE command is received from an initiator ++ * with a pending unit attention condition (before the target ++ * generates the contingent allegiance condition), then the ++ * target shall either: ++ * a) report any pending sense data and preserve the unit ++ * attention condition on the logical unit, or, ++ * b) report the unit attention condition, may discard any ++ * pending sense data, and clear the unit attention ++ * condition on the logical unit for that initiator. ++ * ++ * FSG normally uses option a); enable this code to use option b). ++ */ ++#if 0 ++ if (curlun && curlun->unit_attention_data != SS_NO_SENSE) { ++ curlun->sense_data = curlun->unit_attention_data; ++ curlun->unit_attention_data = SS_NO_SENSE; ++ } ++#endif ++ ++ if (!curlun) { // Unsupported LUNs are okay ++ fsg->bad_lun_okay = 1; ++ sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; ++ sdinfo = 0; ++ valid = 0; ++ } else { ++ sd = curlun->sense_data; ++ sdinfo = curlun->sense_data_info; ++ valid = curlun->info_valid << 7; ++ curlun->sense_data = SS_NO_SENSE; ++ curlun->sense_data_info = 0; ++ curlun->info_valid = 0; ++ } ++ ++ memset(buf, 0, 18); ++ buf[0] = valid | 0x70; // Valid, current error ++ buf[2] = SK(sd); ++ put_unaligned_be32(sdinfo, &buf[3]); /* Sense information */ ++ buf[7] = 18 - 8; // Additional sense length ++ buf[12] = ASC(sd); ++ buf[13] = ASCQ(sd); ++ return 18; ++} ++ ++ ++static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ u32 lba = get_unaligned_be32(&fsg->cmnd[2]); ++ int pmi = fsg->cmnd[8]; ++ u8 *buf = (u8 *) bh->buf; ++ ++ /* Check the PMI and LBA fields */ ++ if (pmi > 1 || (pmi == 0 && lba != 0)) { ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ ++ put_unaligned_be32(curlun->num_sectors - 1, &buf[0]); ++ /* Max logical block */ ++ put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */ ++ return 8; ++} ++ ++ ++static int do_read_header(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ int msf = fsg->cmnd[1] & 0x02; ++ u32 lba = get_unaligned_be32(&fsg->cmnd[2]); ++ u8 *buf = (u8 *) bh->buf; ++ ++ if ((fsg->cmnd[1] & ~0x02) != 0) { /* Mask away MSF */ ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ if (lba >= curlun->num_sectors) { ++ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; ++ return -EINVAL; ++ } ++ ++ memset(buf, 0, 8); ++ buf[0] = 0x01; /* 2048 bytes of user data, rest is EC */ ++ store_cdrom_address(&buf[4], msf, lba); ++ return 8; ++} ++ ++ ++static int do_read_toc(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ int msf = fsg->cmnd[1] & 0x02; ++ int start_track = fsg->cmnd[6]; ++ u8 *buf = (u8 *) bh->buf; ++ ++ if ((fsg->cmnd[1] & ~0x02) != 0 || /* Mask away MSF */ ++ start_track > 1) { ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ ++ memset(buf, 0, 20); ++ buf[1] = (20-2); /* TOC data length */ ++ buf[2] = 1; /* First track number */ ++ buf[3] = 1; /* Last track number */ ++ buf[5] = 0x16; /* Data track, copying allowed */ ++ buf[6] = 0x01; /* Only track is number 1 */ ++ store_cdrom_address(&buf[8], msf, 0); ++ ++ buf[13] = 0x16; /* Lead-out track is data */ ++ buf[14] = 0xAA; /* Lead-out track number */ ++ store_cdrom_address(&buf[16], msf, curlun->num_sectors); ++ return 20; ++} ++ ++ ++static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ int mscmnd = fsg->cmnd[0]; ++ u8 *buf = (u8 *) bh->buf; ++ u8 *buf0 = buf; ++ int pc, page_code; ++ int changeable_values, all_pages; ++ int valid_page = 0; ++ int len, limit; ++ ++ if ((fsg->cmnd[1] & ~0x08) != 0) { // Mask away DBD ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ pc = fsg->cmnd[2] >> 6; ++ page_code = fsg->cmnd[2] & 0x3f; ++ if (pc == 3) { ++ curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED; ++ return -EINVAL; ++ } ++ changeable_values = (pc == 1); ++ all_pages = (page_code == 0x3f); ++ ++ /* Write the mode parameter header. Fixed values are: default ++ * medium type, no cache control (DPOFUA), and no block descriptors. ++ * The only variable value is the WriteProtect bit. We will fill in ++ * the mode data length later. */ ++ memset(buf, 0, 8); ++ if (mscmnd == MODE_SENSE) { ++ buf[2] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA ++ buf += 4; ++ limit = 255; ++ } else { // MODE_SENSE_10 ++ buf[3] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA ++ buf += 8; ++ limit = 65535; // Should really be mod_data.buflen ++ } ++ ++ /* No block descriptors */ ++ ++ /* The mode pages, in numerical order. The only page we support ++ * is the Caching page. */ ++ if (page_code == 0x08 || all_pages) { ++ valid_page = 1; ++ buf[0] = 0x08; // Page code ++ buf[1] = 10; // Page length ++ memset(buf+2, 0, 10); // None of the fields are changeable ++ ++ if (!changeable_values) { ++ buf[2] = 0x04; // Write cache enable, ++ // Read cache not disabled ++ // No cache retention priorities ++ put_unaligned_be16(0xffff, &buf[4]); ++ /* Don't disable prefetch */ ++ /* Minimum prefetch = 0 */ ++ put_unaligned_be16(0xffff, &buf[8]); ++ /* Maximum prefetch */ ++ put_unaligned_be16(0xffff, &buf[10]); ++ /* Maximum prefetch ceiling */ ++ } ++ buf += 12; ++ } ++ ++ /* Check that a valid page was requested and the mode data length ++ * isn't too long. */ ++ len = buf - buf0; ++ if (!valid_page || len > limit) { ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ ++ /* Store the mode data length */ ++ if (mscmnd == MODE_SENSE) ++ buf0[0] = len - 1; ++ else ++ put_unaligned_be16(len - 2, buf0); ++ return len; ++} ++ ++ ++static int do_start_stop(struct fsg_dev *fsg) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ int loej, start; ++ ++ if (!mod_data.removable) { ++ curlun->sense_data = SS_INVALID_COMMAND; ++ return -EINVAL; ++ } ++ ++ // int immed = fsg->cmnd[1] & 0x01; ++ loej = fsg->cmnd[4] & 0x02; ++ start = fsg->cmnd[4] & 0x01; ++ ++#ifdef CONFIG_USB_FILE_STORAGE_TEST ++ if ((fsg->cmnd[1] & ~0x01) != 0 || // Mask away Immed ++ (fsg->cmnd[4] & ~0x03) != 0) { // Mask LoEj, Start ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ ++ if (!start) { ++ ++ /* Are we allowed to unload the media? */ ++ if (curlun->prevent_medium_removal) { ++ LDBG(curlun, "unload attempt prevented\n"); ++ curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED; ++ return -EINVAL; ++ } ++ if (loej) { // Simulate an unload/eject ++ up_read(&fsg->filesem); ++ down_write(&fsg->filesem); ++ fsg_lun_close(curlun); ++ up_write(&fsg->filesem); ++ down_read(&fsg->filesem); ++ } ++ } else { ++ ++ /* Our emulation doesn't support mounting; the medium is ++ * available for use as soon as it is loaded. */ ++ if (!fsg_lun_is_open(curlun)) { ++ curlun->sense_data = SS_MEDIUM_NOT_PRESENT; ++ return -EINVAL; ++ } ++ } ++#endif ++ return 0; ++} ++ ++ ++static int do_prevent_allow(struct fsg_dev *fsg) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ int prevent; ++ ++ if (!mod_data.removable) { ++ curlun->sense_data = SS_INVALID_COMMAND; ++ return -EINVAL; ++ } ++ ++ prevent = fsg->cmnd[4] & 0x01; ++ if ((fsg->cmnd[4] & ~0x01) != 0) { // Mask away Prevent ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ ++ if (curlun->prevent_medium_removal && !prevent) ++ fsg_lun_fsync_sub(curlun); ++ curlun->prevent_medium_removal = prevent; ++ return 0; ++} ++ ++ ++static int do_read_format_capacities(struct fsg_dev *fsg, ++ struct fsg_buffhd *bh) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ u8 *buf = (u8 *) bh->buf; ++ ++ buf[0] = buf[1] = buf[2] = 0; ++ buf[3] = 8; // Only the Current/Maximum Capacity Descriptor ++ buf += 4; ++ ++ put_unaligned_be32(curlun->num_sectors, &buf[0]); ++ /* Number of blocks */ ++ put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */ ++ buf[4] = 0x02; /* Current capacity */ ++ return 12; ++} ++ ++ ++static int do_mode_select(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ ++ /* We don't support MODE SELECT */ ++ curlun->sense_data = SS_INVALID_COMMAND; ++ return -EINVAL; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int halt_bulk_in_endpoint(struct fsg_dev *fsg) ++{ ++ int rc; ++ ++ rc = fsg_set_halt(fsg, fsg->bulk_in); ++ if (rc == -EAGAIN) ++ VDBG(fsg, "delayed bulk-in endpoint halt\n"); ++ while (rc != 0) { ++ if (rc != -EAGAIN) { ++ WARNING(fsg, "usb_ep_set_halt -> %d\n", rc); ++ rc = 0; ++ break; ++ } ++ ++ /* Wait for a short time and then try again */ ++ if (msleep_interruptible(100) != 0) ++ return -EINTR; ++ rc = usb_ep_set_halt(fsg->bulk_in); ++ } ++ return rc; ++} ++ ++static int wedge_bulk_in_endpoint(struct fsg_dev *fsg) ++{ ++ int rc; ++ ++ DBG(fsg, "bulk-in set wedge\n"); ++ rc = usb_ep_set_wedge(fsg->bulk_in); ++ if (rc == -EAGAIN) ++ VDBG(fsg, "delayed bulk-in endpoint wedge\n"); ++ while (rc != 0) { ++ if (rc != -EAGAIN) { ++ WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc); ++ rc = 0; ++ break; ++ } ++ ++ /* Wait for a short time and then try again */ ++ if (msleep_interruptible(100) != 0) ++ return -EINTR; ++ rc = usb_ep_set_wedge(fsg->bulk_in); ++ } ++ return rc; ++} ++ ++static int throw_away_data(struct fsg_dev *fsg) ++{ ++ struct fsg_buffhd *bh; ++ u32 amount; ++ int rc; ++ ++ while ((bh = fsg->next_buffhd_to_drain)->state != BUF_STATE_EMPTY || ++ fsg->usb_amount_left > 0) { ++ ++ /* Throw away the data in a filled buffer */ ++ if (bh->state == BUF_STATE_FULL) { ++ smp_rmb(); ++ bh->state = BUF_STATE_EMPTY; ++ fsg->next_buffhd_to_drain = bh->next; ++ ++ /* A short packet or an error ends everything */ ++ if (bh->outreq->actual < bh->bulk_out_intended_length || ++ bh->outreq->status != 0) { ++ raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); ++ return -EINTR; ++ } ++ continue; ++ } ++ ++ /* Try to submit another request if we need one */ ++ bh = fsg->next_buffhd_to_fill; ++ if (bh->state == BUF_STATE_EMPTY && fsg->usb_amount_left > 0) { ++ amount = min(fsg->usb_amount_left, ++ (u32) mod_data.buflen); ++ ++ /* Except at the end of the transfer, amount will be ++ * equal to the buffer size, which is divisible by ++ * the bulk-out maxpacket size. ++ */ ++ set_bulk_out_req_length(fsg, bh, amount); ++ start_transfer(fsg, fsg->bulk_out, bh->outreq, ++ &bh->outreq_busy, &bh->state); ++ fsg->next_buffhd_to_fill = bh->next; ++ fsg->usb_amount_left -= amount; ++ continue; ++ } ++ ++ /* Otherwise wait for something to happen */ ++ rc = sleep_thread(fsg); ++ if (rc) ++ return rc; ++ } ++ return 0; ++} ++ ++ ++static int finish_reply(struct fsg_dev *fsg) ++{ ++ struct fsg_buffhd *bh = fsg->next_buffhd_to_fill; ++ int rc = 0; ++ ++ switch (fsg->data_dir) { ++ case DATA_DIR_NONE: ++ break; // Nothing to send ++ ++ /* If we don't know whether the host wants to read or write, ++ * this must be CB or CBI with an unknown command. We mustn't ++ * try to send or receive any data. So stall both bulk pipes ++ * if we can and wait for a reset. */ ++ case DATA_DIR_UNKNOWN: ++ if (mod_data.can_stall) { ++ fsg_set_halt(fsg, fsg->bulk_out); ++ rc = halt_bulk_in_endpoint(fsg); ++ } ++ break; ++ ++ /* All but the last buffer of data must have already been sent */ ++ case DATA_DIR_TO_HOST: ++ if (fsg->data_size == 0) ++ ; // Nothing to send ++ ++ /* If there's no residue, simply send the last buffer */ ++ else if (fsg->residue == 0) { ++ bh->inreq->zero = 0; ++ start_transfer(fsg, fsg->bulk_in, bh->inreq, ++ &bh->inreq_busy, &bh->state); ++ fsg->next_buffhd_to_fill = bh->next; ++ } ++ ++ /* There is a residue. For CB and CBI, simply mark the end ++ * of the data with a short packet. However, if we are ++ * allowed to stall, there was no data at all (residue == ++ * data_size), and the command failed (invalid LUN or ++ * sense data is set), then halt the bulk-in endpoint ++ * instead. */ ++ else if (!transport_is_bbb()) { ++ if (mod_data.can_stall && ++ fsg->residue == fsg->data_size && ++ (!fsg->curlun || fsg->curlun->sense_data != SS_NO_SENSE)) { ++ bh->state = BUF_STATE_EMPTY; ++ rc = halt_bulk_in_endpoint(fsg); ++ } else { ++ bh->inreq->zero = 1; ++ start_transfer(fsg, fsg->bulk_in, bh->inreq, ++ &bh->inreq_busy, &bh->state); ++ fsg->next_buffhd_to_fill = bh->next; ++ } ++ } ++ ++ /* ++ * For Bulk-only, mark the end of the data with a short ++ * packet. If we are allowed to stall, halt the bulk-in ++ * endpoint. (Note: This violates the Bulk-Only Transport ++ * specification, which requires us to pad the data if we ++ * don't halt the endpoint. Presumably nobody will mind.) ++ */ ++ else { ++ bh->inreq->zero = 1; ++ start_transfer(fsg, fsg->bulk_in, bh->inreq, ++ &bh->inreq_busy, &bh->state); ++ fsg->next_buffhd_to_fill = bh->next; ++ if (mod_data.can_stall) ++ rc = halt_bulk_in_endpoint(fsg); ++ } ++ break; ++ ++ /* We have processed all we want from the data the host has sent. ++ * There may still be outstanding bulk-out requests. */ ++ case DATA_DIR_FROM_HOST: ++ if (fsg->residue == 0) ++ ; // Nothing to receive ++ ++ /* Did the host stop sending unexpectedly early? */ ++ else if (fsg->short_packet_received) { ++ raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); ++ rc = -EINTR; ++ } ++ ++ /* We haven't processed all the incoming data. Even though ++ * we may be allowed to stall, doing so would cause a race. ++ * The controller may already have ACK'ed all the remaining ++ * bulk-out packets, in which case the host wouldn't see a ++ * STALL. Not realizing the endpoint was halted, it wouldn't ++ * clear the halt -- leading to problems later on. */ ++#if 0 ++ else if (mod_data.can_stall) { ++ fsg_set_halt(fsg, fsg->bulk_out); ++ raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); ++ rc = -EINTR; ++ } ++#endif ++ ++ /* We can't stall. Read in the excess data and throw it ++ * all away. */ ++ else ++ rc = throw_away_data(fsg); ++ break; ++ } ++ return rc; ++} ++ ++ ++static int send_status(struct fsg_dev *fsg) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ struct fsg_buffhd *bh; ++ int rc; ++ u8 status = US_BULK_STAT_OK; ++ u32 sd, sdinfo = 0; ++ ++ /* Wait for the next buffer to become available */ ++ bh = fsg->next_buffhd_to_fill; ++ while (bh->state != BUF_STATE_EMPTY) { ++ rc = sleep_thread(fsg); ++ if (rc) ++ return rc; ++ } ++ ++ if (curlun) { ++ sd = curlun->sense_data; ++ sdinfo = curlun->sense_data_info; ++ } else if (fsg->bad_lun_okay) ++ sd = SS_NO_SENSE; ++ else ++ sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; ++ ++ if (fsg->phase_error) { ++ DBG(fsg, "sending phase-error status\n"); ++ status = US_BULK_STAT_PHASE; ++ sd = SS_INVALID_COMMAND; ++ } else if (sd != SS_NO_SENSE) { ++ DBG(fsg, "sending command-failure status\n"); ++ status = US_BULK_STAT_FAIL; ++ VDBG(fsg, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;" ++ " info x%x\n", ++ SK(sd), ASC(sd), ASCQ(sd), sdinfo); ++ } ++ ++ if (transport_is_bbb()) { ++ struct bulk_cs_wrap *csw = bh->buf; ++ ++ /* Store and send the Bulk-only CSW */ ++ csw->Signature = cpu_to_le32(US_BULK_CS_SIGN); ++ csw->Tag = fsg->tag; ++ csw->Residue = cpu_to_le32(fsg->residue); ++ csw->Status = status; ++ ++ bh->inreq->length = US_BULK_CS_WRAP_LEN; ++ bh->inreq->zero = 0; ++ start_transfer(fsg, fsg->bulk_in, bh->inreq, ++ &bh->inreq_busy, &bh->state); ++ ++ } else if (mod_data.transport_type == USB_PR_CB) { ++ ++ /* Control-Bulk transport has no status phase! */ ++ return 0; ++ ++ } else { // USB_PR_CBI ++ struct interrupt_data *buf = bh->buf; ++ ++ /* Store and send the Interrupt data. UFI sends the ASC ++ * and ASCQ bytes. Everything else sends a Type (which ++ * is always 0) and the status Value. */ ++ if (mod_data.protocol_type == USB_SC_UFI) { ++ buf->bType = ASC(sd); ++ buf->bValue = ASCQ(sd); ++ } else { ++ buf->bType = 0; ++ buf->bValue = status; ++ } ++ fsg->intreq->length = CBI_INTERRUPT_DATA_LEN; ++ ++ fsg->intr_buffhd = bh; // Point to the right buffhd ++ fsg->intreq->buf = bh->inreq->buf; ++ fsg->intreq->context = bh; ++ start_transfer(fsg, fsg->intr_in, fsg->intreq, ++ &fsg->intreq_busy, &bh->state); ++ } ++ ++ fsg->next_buffhd_to_fill = bh->next; ++ return 0; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* Check whether the command is properly formed and whether its data size ++ * and direction agree with the values we already have. */ ++static int check_command(struct fsg_dev *fsg, int cmnd_size, ++ enum data_direction data_dir, unsigned int mask, ++ int needs_medium, const char *name) ++{ ++ int i; ++ int lun = fsg->cmnd[1] >> 5; ++ static const char dirletter[4] = {'u', 'o', 'i', 'n'}; ++ char hdlen[20]; ++ struct fsg_lun *curlun; ++ ++ /* Adjust the expected cmnd_size for protocol encapsulation padding. ++ * Transparent SCSI doesn't pad. */ ++ if (protocol_is_scsi()) ++ ; ++ ++ /* There's some disagreement as to whether RBC pads commands or not. ++ * We'll play it safe and accept either form. */ ++ else if (mod_data.protocol_type == USB_SC_RBC) { ++ if (fsg->cmnd_size == 12) ++ cmnd_size = 12; ++ ++ /* All the other protocols pad to 12 bytes */ ++ } else ++ cmnd_size = 12; ++ ++ hdlen[0] = 0; ++ if (fsg->data_dir != DATA_DIR_UNKNOWN) ++ sprintf(hdlen, ", H%c=%u", dirletter[(int) fsg->data_dir], ++ fsg->data_size); ++ VDBG(fsg, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n", ++ name, cmnd_size, dirletter[(int) data_dir], ++ fsg->data_size_from_cmnd, fsg->cmnd_size, hdlen); ++ ++ /* We can't reply at all until we know the correct data direction ++ * and size. */ ++ if (fsg->data_size_from_cmnd == 0) ++ data_dir = DATA_DIR_NONE; ++ if (fsg->data_dir == DATA_DIR_UNKNOWN) { // CB or CBI ++ fsg->data_dir = data_dir; ++ fsg->data_size = fsg->data_size_from_cmnd; ++ ++ } else { // Bulk-only ++ if (fsg->data_size < fsg->data_size_from_cmnd) { ++ ++ /* Host data size < Device data size is a phase error. ++ * Carry out the command, but only transfer as much ++ * as we are allowed. */ ++ fsg->data_size_from_cmnd = fsg->data_size; ++ fsg->phase_error = 1; ++ } ++ } ++ fsg->residue = fsg->usb_amount_left = fsg->data_size; ++ ++ /* Conflicting data directions is a phase error */ ++ if (fsg->data_dir != data_dir && fsg->data_size_from_cmnd > 0) { ++ fsg->phase_error = 1; ++ return -EINVAL; ++ } ++ ++ /* Verify the length of the command itself */ ++ if (cmnd_size != fsg->cmnd_size) { ++ ++ /* Special case workaround: There are plenty of buggy SCSI ++ * implementations. Many have issues with cbw->Length ++ * field passing a wrong command size. For those cases we ++ * always try to work around the problem by using the length ++ * sent by the host side provided it is at least as large ++ * as the correct command length. ++ * Examples of such cases would be MS-Windows, which issues ++ * REQUEST SENSE with cbw->Length == 12 where it should ++ * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and ++ * REQUEST SENSE with cbw->Length == 10 where it should ++ * be 6 as well. ++ */ ++ if (cmnd_size <= fsg->cmnd_size) { ++ DBG(fsg, "%s is buggy! Expected length %d " ++ "but we got %d\n", name, ++ cmnd_size, fsg->cmnd_size); ++ cmnd_size = fsg->cmnd_size; ++ } else { ++ fsg->phase_error = 1; ++ return -EINVAL; ++ } ++ } ++ ++ /* Check that the LUN values are consistent */ ++ if (transport_is_bbb()) { ++ if (fsg->lun != lun) ++ DBG(fsg, "using LUN %d from CBW, " ++ "not LUN %d from CDB\n", ++ fsg->lun, lun); ++ } ++ ++ /* Check the LUN */ ++ curlun = fsg->curlun; ++ if (curlun) { ++ if (fsg->cmnd[0] != REQUEST_SENSE) { ++ curlun->sense_data = SS_NO_SENSE; ++ curlun->sense_data_info = 0; ++ curlun->info_valid = 0; ++ } ++ } else { ++ fsg->bad_lun_okay = 0; ++ ++ /* INQUIRY and REQUEST SENSE commands are explicitly allowed ++ * to use unsupported LUNs; all others may not. */ ++ if (fsg->cmnd[0] != INQUIRY && ++ fsg->cmnd[0] != REQUEST_SENSE) { ++ DBG(fsg, "unsupported LUN %d\n", fsg->lun); ++ return -EINVAL; ++ } ++ } ++ ++ /* If a unit attention condition exists, only INQUIRY and ++ * REQUEST SENSE commands are allowed; anything else must fail. */ ++ if (curlun && curlun->unit_attention_data != SS_NO_SENSE && ++ fsg->cmnd[0] != INQUIRY && ++ fsg->cmnd[0] != REQUEST_SENSE) { ++ curlun->sense_data = curlun->unit_attention_data; ++ curlun->unit_attention_data = SS_NO_SENSE; ++ return -EINVAL; ++ } ++ ++ /* Check that only command bytes listed in the mask are non-zero */ ++ fsg->cmnd[1] &= 0x1f; // Mask away the LUN ++ for (i = 1; i < cmnd_size; ++i) { ++ if (fsg->cmnd[i] && !(mask & (1 << i))) { ++ if (curlun) ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ } ++ ++ /* If the medium isn't mounted and the command needs to access ++ * it, return an error. */ ++ if (curlun && !fsg_lun_is_open(curlun) && needs_medium) { ++ curlun->sense_data = SS_MEDIUM_NOT_PRESENT; ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/* wrapper of check_command for data size in blocks handling */ ++static int check_command_size_in_blocks(struct fsg_dev *fsg, int cmnd_size, ++ enum data_direction data_dir, unsigned int mask, ++ int needs_medium, const char *name) ++{ ++ if (fsg->curlun) ++ fsg->data_size_from_cmnd <<= fsg->curlun->blkbits; ++ return check_command(fsg, cmnd_size, data_dir, ++ mask, needs_medium, name); ++} ++ ++static int do_scsi_command(struct fsg_dev *fsg) ++{ ++ struct fsg_buffhd *bh; ++ int rc; ++ int reply = -EINVAL; ++ int i; ++ static char unknown[16]; ++ ++ dump_cdb(fsg); ++ ++ /* Wait for the next buffer to become available for data or status */ ++ bh = fsg->next_buffhd_to_drain = fsg->next_buffhd_to_fill; ++ while (bh->state != BUF_STATE_EMPTY) { ++ rc = sleep_thread(fsg); ++ if (rc) ++ return rc; ++ } ++ fsg->phase_error = 0; ++ fsg->short_packet_received = 0; ++ ++ down_read(&fsg->filesem); // We're using the backing file ++ switch (fsg->cmnd[0]) { ++ ++ case INQUIRY: ++ fsg->data_size_from_cmnd = fsg->cmnd[4]; ++ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, ++ (1<<4), 0, ++ "INQUIRY")) == 0) ++ reply = do_inquiry(fsg, bh); ++ break; ++ ++ case MODE_SELECT: ++ fsg->data_size_from_cmnd = fsg->cmnd[4]; ++ if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST, ++ (1<<1) | (1<<4), 0, ++ "MODE SELECT(6)")) == 0) ++ reply = do_mode_select(fsg, bh); ++ break; ++ ++ case MODE_SELECT_10: ++ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); ++ if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST, ++ (1<<1) | (3<<7), 0, ++ "MODE SELECT(10)")) == 0) ++ reply = do_mode_select(fsg, bh); ++ break; ++ ++ case MODE_SENSE: ++ fsg->data_size_from_cmnd = fsg->cmnd[4]; ++ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, ++ (1<<1) | (1<<2) | (1<<4), 0, ++ "MODE SENSE(6)")) == 0) ++ reply = do_mode_sense(fsg, bh); ++ break; ++ ++ case MODE_SENSE_10: ++ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); ++ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, ++ (1<<1) | (1<<2) | (3<<7), 0, ++ "MODE SENSE(10)")) == 0) ++ reply = do_mode_sense(fsg, bh); ++ break; ++ ++ case ALLOW_MEDIUM_REMOVAL: ++ fsg->data_size_from_cmnd = 0; ++ if ((reply = check_command(fsg, 6, DATA_DIR_NONE, ++ (1<<4), 0, ++ "PREVENT-ALLOW MEDIUM REMOVAL")) == 0) ++ reply = do_prevent_allow(fsg); ++ break; ++ ++ case READ_6: ++ i = fsg->cmnd[4]; ++ fsg->data_size_from_cmnd = (i == 0) ? 256 : i; ++ if ((reply = check_command_size_in_blocks(fsg, 6, ++ DATA_DIR_TO_HOST, ++ (7<<1) | (1<<4), 1, ++ "READ(6)")) == 0) ++ reply = do_read(fsg); ++ break; ++ ++ case READ_10: ++ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); ++ if ((reply = check_command_size_in_blocks(fsg, 10, ++ DATA_DIR_TO_HOST, ++ (1<<1) | (0xf<<2) | (3<<7), 1, ++ "READ(10)")) == 0) ++ reply = do_read(fsg); ++ break; ++ ++ case READ_12: ++ fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]); ++ if ((reply = check_command_size_in_blocks(fsg, 12, ++ DATA_DIR_TO_HOST, ++ (1<<1) | (0xf<<2) | (0xf<<6), 1, ++ "READ(12)")) == 0) ++ reply = do_read(fsg); ++ break; ++ ++ case READ_CAPACITY: ++ fsg->data_size_from_cmnd = 8; ++ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, ++ (0xf<<2) | (1<<8), 1, ++ "READ CAPACITY")) == 0) ++ reply = do_read_capacity(fsg, bh); ++ break; ++ ++ case READ_HEADER: ++ if (!mod_data.cdrom) ++ goto unknown_cmnd; ++ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); ++ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, ++ (3<<7) | (0x1f<<1), 1, ++ "READ HEADER")) == 0) ++ reply = do_read_header(fsg, bh); ++ break; ++ ++ case READ_TOC: ++ if (!mod_data.cdrom) ++ goto unknown_cmnd; ++ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); ++ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, ++ (7<<6) | (1<<1), 1, ++ "READ TOC")) == 0) ++ reply = do_read_toc(fsg, bh); ++ break; ++ ++ case READ_FORMAT_CAPACITIES: ++ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); ++ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, ++ (3<<7), 1, ++ "READ FORMAT CAPACITIES")) == 0) ++ reply = do_read_format_capacities(fsg, bh); ++ break; ++ ++ case REQUEST_SENSE: ++ fsg->data_size_from_cmnd = fsg->cmnd[4]; ++ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, ++ (1<<4), 0, ++ "REQUEST SENSE")) == 0) ++ reply = do_request_sense(fsg, bh); ++ break; ++ ++ case START_STOP: ++ fsg->data_size_from_cmnd = 0; ++ if ((reply = check_command(fsg, 6, DATA_DIR_NONE, ++ (1<<1) | (1<<4), 0, ++ "START-STOP UNIT")) == 0) ++ reply = do_start_stop(fsg); ++ break; ++ ++ case SYNCHRONIZE_CACHE: ++ fsg->data_size_from_cmnd = 0; ++ if ((reply = check_command(fsg, 10, DATA_DIR_NONE, ++ (0xf<<2) | (3<<7), 1, ++ "SYNCHRONIZE CACHE")) == 0) ++ reply = do_synchronize_cache(fsg); ++ break; ++ ++ case TEST_UNIT_READY: ++ fsg->data_size_from_cmnd = 0; ++ reply = check_command(fsg, 6, DATA_DIR_NONE, ++ 0, 1, ++ "TEST UNIT READY"); ++ break; ++ ++ /* Although optional, this command is used by MS-Windows. We ++ * support a minimal version: BytChk must be 0. */ ++ case VERIFY: ++ fsg->data_size_from_cmnd = 0; ++ if ((reply = check_command(fsg, 10, DATA_DIR_NONE, ++ (1<<1) | (0xf<<2) | (3<<7), 1, ++ "VERIFY")) == 0) ++ reply = do_verify(fsg); ++ break; ++ ++ case WRITE_6: ++ i = fsg->cmnd[4]; ++ fsg->data_size_from_cmnd = (i == 0) ? 256 : i; ++ if ((reply = check_command_size_in_blocks(fsg, 6, ++ DATA_DIR_FROM_HOST, ++ (7<<1) | (1<<4), 1, ++ "WRITE(6)")) == 0) ++ reply = do_write(fsg); ++ break; ++ ++ case WRITE_10: ++ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); ++ if ((reply = check_command_size_in_blocks(fsg, 10, ++ DATA_DIR_FROM_HOST, ++ (1<<1) | (0xf<<2) | (3<<7), 1, ++ "WRITE(10)")) == 0) ++ reply = do_write(fsg); ++ break; ++ ++ case WRITE_12: ++ fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]); ++ if ((reply = check_command_size_in_blocks(fsg, 12, ++ DATA_DIR_FROM_HOST, ++ (1<<1) | (0xf<<2) | (0xf<<6), 1, ++ "WRITE(12)")) == 0) ++ reply = do_write(fsg); ++ break; ++ ++ /* Some mandatory commands that we recognize but don't implement. ++ * They don't mean much in this setting. It's left as an exercise ++ * for anyone interested to implement RESERVE and RELEASE in terms ++ * of Posix locks. */ ++ case FORMAT_UNIT: ++ case RELEASE: ++ case RESERVE: ++ case SEND_DIAGNOSTIC: ++ // Fall through ++ ++ default: ++ unknown_cmnd: ++ fsg->data_size_from_cmnd = 0; ++ sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]); ++ if ((reply = check_command(fsg, fsg->cmnd_size, ++ DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) { ++ fsg->curlun->sense_data = SS_INVALID_COMMAND; ++ reply = -EINVAL; ++ } ++ break; ++ } ++ up_read(&fsg->filesem); ++ ++ if (reply == -EINTR || signal_pending(current)) ++ return -EINTR; ++ ++ /* Set up the single reply buffer for finish_reply() */ ++ if (reply == -EINVAL) ++ reply = 0; // Error reply length ++ if (reply >= 0 && fsg->data_dir == DATA_DIR_TO_HOST) { ++ reply = min((u32) reply, fsg->data_size_from_cmnd); ++ bh->inreq->length = reply; ++ bh->state = BUF_STATE_FULL; ++ fsg->residue -= reply; ++ } // Otherwise it's already set ++ ++ return 0; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ struct usb_request *req = bh->outreq; ++ struct bulk_cb_wrap *cbw = req->buf; ++ ++ /* Was this a real packet? Should it be ignored? */ ++ if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) ++ return -EINVAL; ++ ++ /* Is the CBW valid? */ ++ if (req->actual != US_BULK_CB_WRAP_LEN || ++ cbw->Signature != cpu_to_le32( ++ US_BULK_CB_SIGN)) { ++ DBG(fsg, "invalid CBW: len %u sig 0x%x\n", ++ req->actual, ++ le32_to_cpu(cbw->Signature)); ++ ++ /* The Bulk-only spec says we MUST stall the IN endpoint ++ * (6.6.1), so it's unavoidable. It also says we must ++ * retain this state until the next reset, but there's ++ * no way to tell the controller driver it should ignore ++ * Clear-Feature(HALT) requests. ++ * ++ * We aren't required to halt the OUT endpoint; instead ++ * we can simply accept and discard any data received ++ * until the next reset. */ ++ wedge_bulk_in_endpoint(fsg); ++ set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); ++ return -EINVAL; ++ } ++ ++ /* Is the CBW meaningful? */ ++ if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~US_BULK_FLAG_IN || ++ cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) { ++ DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, " ++ "cmdlen %u\n", ++ cbw->Lun, cbw->Flags, cbw->Length); ++ ++ /* We can do anything we want here, so let's stall the ++ * bulk pipes if we are allowed to. */ ++ if (mod_data.can_stall) { ++ fsg_set_halt(fsg, fsg->bulk_out); ++ halt_bulk_in_endpoint(fsg); ++ } ++ return -EINVAL; ++ } ++ ++ /* Save the command for later */ ++ fsg->cmnd_size = cbw->Length; ++ memcpy(fsg->cmnd, cbw->CDB, fsg->cmnd_size); ++ if (cbw->Flags & US_BULK_FLAG_IN) ++ fsg->data_dir = DATA_DIR_TO_HOST; ++ else ++ fsg->data_dir = DATA_DIR_FROM_HOST; ++ fsg->data_size = le32_to_cpu(cbw->DataTransferLength); ++ if (fsg->data_size == 0) ++ fsg->data_dir = DATA_DIR_NONE; ++ fsg->lun = cbw->Lun; ++ fsg->tag = cbw->Tag; ++ return 0; ++} ++ ++ ++static int get_next_command(struct fsg_dev *fsg) ++{ ++ struct fsg_buffhd *bh; ++ int rc = 0; ++ ++ if (transport_is_bbb()) { ++ ++ /* Wait for the next buffer to become available */ ++ bh = fsg->next_buffhd_to_fill; ++ while (bh->state != BUF_STATE_EMPTY) { ++ rc = sleep_thread(fsg); ++ if (rc) ++ return rc; ++ } ++ ++ /* Queue a request to read a Bulk-only CBW */ ++ set_bulk_out_req_length(fsg, bh, US_BULK_CB_WRAP_LEN); ++ start_transfer(fsg, fsg->bulk_out, bh->outreq, ++ &bh->outreq_busy, &bh->state); ++ ++ /* We will drain the buffer in software, which means we ++ * can reuse it for the next filling. No need to advance ++ * next_buffhd_to_fill. */ ++ ++ /* Wait for the CBW to arrive */ ++ while (bh->state != BUF_STATE_FULL) { ++ rc = sleep_thread(fsg); ++ if (rc) ++ return rc; ++ } ++ smp_rmb(); ++ rc = received_cbw(fsg, bh); ++ bh->state = BUF_STATE_EMPTY; ++ ++ } else { // USB_PR_CB or USB_PR_CBI ++ ++ /* Wait for the next command to arrive */ ++ while (fsg->cbbuf_cmnd_size == 0) { ++ rc = sleep_thread(fsg); ++ if (rc) ++ return rc; ++ } ++ ++ /* Is the previous status interrupt request still busy? ++ * The host is allowed to skip reading the status, ++ * so we must cancel it. */ ++ if (fsg->intreq_busy) ++ usb_ep_dequeue(fsg->intr_in, fsg->intreq); ++ ++ /* Copy the command and mark the buffer empty */ ++ fsg->data_dir = DATA_DIR_UNKNOWN; ++ spin_lock_irq(&fsg->lock); ++ fsg->cmnd_size = fsg->cbbuf_cmnd_size; ++ memcpy(fsg->cmnd, fsg->cbbuf_cmnd, fsg->cmnd_size); ++ fsg->cbbuf_cmnd_size = 0; ++ spin_unlock_irq(&fsg->lock); ++ ++ /* Use LUN from the command */ ++ fsg->lun = fsg->cmnd[1] >> 5; ++ } ++ ++ /* Update current lun */ ++ if (fsg->lun >= 0 && fsg->lun < fsg->nluns) ++ fsg->curlun = &fsg->luns[fsg->lun]; ++ else ++ fsg->curlun = NULL; ++ ++ return rc; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int enable_endpoint(struct fsg_dev *fsg, struct usb_ep *ep, ++ const struct usb_endpoint_descriptor *d) ++{ ++ int rc; ++ ++ ep->driver_data = fsg; ++ ep->desc = d; ++ rc = usb_ep_enable(ep); ++ if (rc) ++ ERROR(fsg, "can't enable %s, result %d\n", ep->name, rc); ++ return rc; ++} ++ ++static int alloc_request(struct fsg_dev *fsg, struct usb_ep *ep, ++ struct usb_request **preq) ++{ ++ *preq = usb_ep_alloc_request(ep, GFP_ATOMIC); ++ if (*preq) ++ return 0; ++ ERROR(fsg, "can't allocate request for %s\n", ep->name); ++ return -ENOMEM; ++} ++ ++/* ++ * Reset interface setting and re-init endpoint state (toggle etc). ++ * Call with altsetting < 0 to disable the interface. The only other ++ * available altsetting is 0, which enables the interface. ++ */ ++static int do_set_interface(struct fsg_dev *fsg, int altsetting) ++{ ++ int rc = 0; ++ int i; ++ const struct usb_endpoint_descriptor *d; ++ ++ if (fsg->running) ++ DBG(fsg, "reset interface\n"); ++ ++reset: ++ /* Deallocate the requests */ ++ for (i = 0; i < fsg_num_buffers; ++i) { ++ struct fsg_buffhd *bh = &fsg->buffhds[i]; ++ ++ if (bh->inreq) { ++ usb_ep_free_request(fsg->bulk_in, bh->inreq); ++ bh->inreq = NULL; ++ } ++ if (bh->outreq) { ++ usb_ep_free_request(fsg->bulk_out, bh->outreq); ++ bh->outreq = NULL; ++ } ++ } ++ if (fsg->intreq) { ++ usb_ep_free_request(fsg->intr_in, fsg->intreq); ++ fsg->intreq = NULL; ++ } ++ ++ /* Disable the endpoints */ ++ if (fsg->bulk_in_enabled) { ++ usb_ep_disable(fsg->bulk_in); ++ fsg->bulk_in_enabled = 0; ++ } ++ if (fsg->bulk_out_enabled) { ++ usb_ep_disable(fsg->bulk_out); ++ fsg->bulk_out_enabled = 0; ++ } ++ if (fsg->intr_in_enabled) { ++ usb_ep_disable(fsg->intr_in); ++ fsg->intr_in_enabled = 0; ++ } ++ ++ fsg->running = 0; ++ if (altsetting < 0 || rc != 0) ++ return rc; ++ ++ DBG(fsg, "set interface %d\n", altsetting); ++ ++ /* Enable the endpoints */ ++ d = fsg_ep_desc(fsg->gadget, ++ &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc, ++ &fsg_ss_bulk_in_desc); ++ if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0) ++ goto reset; ++ fsg->bulk_in_enabled = 1; ++ ++ d = fsg_ep_desc(fsg->gadget, ++ &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc, ++ &fsg_ss_bulk_out_desc); ++ if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0) ++ goto reset; ++ fsg->bulk_out_enabled = 1; ++ fsg->bulk_out_maxpacket = usb_endpoint_maxp(d); ++ clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); ++ ++ if (transport_is_cbi()) { ++ d = fsg_ep_desc(fsg->gadget, ++ &fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc, ++ &fsg_ss_intr_in_desc); ++ if ((rc = enable_endpoint(fsg, fsg->intr_in, d)) != 0) ++ goto reset; ++ fsg->intr_in_enabled = 1; ++ } ++ ++ /* Allocate the requests */ ++ for (i = 0; i < fsg_num_buffers; ++i) { ++ struct fsg_buffhd *bh = &fsg->buffhds[i]; ++ ++ if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0) ++ goto reset; ++ if ((rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq)) != 0) ++ goto reset; ++ bh->inreq->buf = bh->outreq->buf = bh->buf; ++ bh->inreq->context = bh->outreq->context = bh; ++ bh->inreq->complete = bulk_in_complete; ++ bh->outreq->complete = bulk_out_complete; ++ } ++ if (transport_is_cbi()) { ++ if ((rc = alloc_request(fsg, fsg->intr_in, &fsg->intreq)) != 0) ++ goto reset; ++ fsg->intreq->complete = intr_in_complete; ++ } ++ ++ fsg->running = 1; ++ for (i = 0; i < fsg->nluns; ++i) ++ fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED; ++ return rc; ++} ++ ++ ++/* ++ * Change our operational configuration. This code must agree with the code ++ * that returns config descriptors, and with interface altsetting code. ++ * ++ * It's also responsible for power management interactions. Some ++ * configurations might not work with our current power sources. ++ * For now we just assume the gadget is always self-powered. ++ */ ++static int do_set_config(struct fsg_dev *fsg, u8 new_config) ++{ ++ int rc = 0; ++ ++ /* Disable the single interface */ ++ if (fsg->config != 0) { ++ DBG(fsg, "reset config\n"); ++ fsg->config = 0; ++ rc = do_set_interface(fsg, -1); ++ } ++ ++ /* Enable the interface */ ++ if (new_config != 0) { ++ fsg->config = new_config; ++ if ((rc = do_set_interface(fsg, 0)) != 0) ++ fsg->config = 0; // Reset on errors ++ else ++ INFO(fsg, "%s config #%d\n", ++ usb_speed_string(fsg->gadget->speed), ++ fsg->config); ++ } ++ return rc; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void handle_exception(struct fsg_dev *fsg) ++{ ++ siginfo_t info; ++ int sig; ++ int i; ++ int num_active; ++ struct fsg_buffhd *bh; ++ enum fsg_state old_state; ++ u8 new_config; ++ struct fsg_lun *curlun; ++ unsigned int exception_req_tag; ++ int rc; ++ ++ /* Clear the existing signals. Anything but SIGUSR1 is converted ++ * into a high-priority EXIT exception. */ ++ for (;;) { ++ sig = dequeue_signal_lock(current, ¤t->blocked, &info); ++ if (!sig) ++ break; ++ if (sig != SIGUSR1) { ++ if (fsg->state < FSG_STATE_EXIT) ++ DBG(fsg, "Main thread exiting on signal\n"); ++ raise_exception(fsg, FSG_STATE_EXIT); ++ } ++ } ++ ++ /* Cancel all the pending transfers */ ++ if (fsg->intreq_busy) ++ usb_ep_dequeue(fsg->intr_in, fsg->intreq); ++ for (i = 0; i < fsg_num_buffers; ++i) { ++ bh = &fsg->buffhds[i]; ++ if (bh->inreq_busy) ++ usb_ep_dequeue(fsg->bulk_in, bh->inreq); ++ if (bh->outreq_busy) ++ usb_ep_dequeue(fsg->bulk_out, bh->outreq); ++ } ++ ++ /* Wait until everything is idle */ ++ for (;;) { ++ num_active = fsg->intreq_busy; ++ for (i = 0; i < fsg_num_buffers; ++i) { ++ bh = &fsg->buffhds[i]; ++ num_active += bh->inreq_busy + bh->outreq_busy; ++ } ++ if (num_active == 0) ++ break; ++ if (sleep_thread(fsg)) ++ return; ++ } ++ ++ /* Clear out the controller's fifos */ ++ if (fsg->bulk_in_enabled) ++ usb_ep_fifo_flush(fsg->bulk_in); ++ if (fsg->bulk_out_enabled) ++ usb_ep_fifo_flush(fsg->bulk_out); ++ if (fsg->intr_in_enabled) ++ usb_ep_fifo_flush(fsg->intr_in); ++ ++ /* Reset the I/O buffer states and pointers, the SCSI ++ * state, and the exception. Then invoke the handler. */ ++ spin_lock_irq(&fsg->lock); ++ ++ for (i = 0; i < fsg_num_buffers; ++i) { ++ bh = &fsg->buffhds[i]; ++ bh->state = BUF_STATE_EMPTY; ++ } ++ fsg->next_buffhd_to_fill = fsg->next_buffhd_to_drain = ++ &fsg->buffhds[0]; ++ ++ exception_req_tag = fsg->exception_req_tag; ++ new_config = fsg->new_config; ++ old_state = fsg->state; ++ ++ if (old_state == FSG_STATE_ABORT_BULK_OUT) ++ fsg->state = FSG_STATE_STATUS_PHASE; ++ else { ++ for (i = 0; i < fsg->nluns; ++i) { ++ curlun = &fsg->luns[i]; ++ curlun->prevent_medium_removal = 0; ++ curlun->sense_data = curlun->unit_attention_data = ++ SS_NO_SENSE; ++ curlun->sense_data_info = 0; ++ curlun->info_valid = 0; ++ } ++ fsg->state = FSG_STATE_IDLE; ++ } ++ spin_unlock_irq(&fsg->lock); ++ ++ /* Carry out any extra actions required for the exception */ ++ switch (old_state) { ++ default: ++ break; ++ ++ case FSG_STATE_ABORT_BULK_OUT: ++ send_status(fsg); ++ spin_lock_irq(&fsg->lock); ++ if (fsg->state == FSG_STATE_STATUS_PHASE) ++ fsg->state = FSG_STATE_IDLE; ++ spin_unlock_irq(&fsg->lock); ++ break; ++ ++ case FSG_STATE_RESET: ++ /* In case we were forced against our will to halt a ++ * bulk endpoint, clear the halt now. (The SuperH UDC ++ * requires this.) */ ++ if (test_and_clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) ++ usb_ep_clear_halt(fsg->bulk_in); ++ ++ if (transport_is_bbb()) { ++ if (fsg->ep0_req_tag == exception_req_tag) ++ ep0_queue(fsg); // Complete the status stage ++ ++ } else if (transport_is_cbi()) ++ send_status(fsg); // Status by interrupt pipe ++ ++ /* Technically this should go here, but it would only be ++ * a waste of time. Ditto for the INTERFACE_CHANGE and ++ * CONFIG_CHANGE cases. */ ++ // for (i = 0; i < fsg->nluns; ++i) ++ // fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED; ++ break; ++ ++ case FSG_STATE_INTERFACE_CHANGE: ++ rc = do_set_interface(fsg, 0); ++ if (fsg->ep0_req_tag != exception_req_tag) ++ break; ++ if (rc != 0) // STALL on errors ++ fsg_set_halt(fsg, fsg->ep0); ++ else // Complete the status stage ++ ep0_queue(fsg); ++ break; ++ ++ case FSG_STATE_CONFIG_CHANGE: ++ rc = do_set_config(fsg, new_config); ++ if (fsg->ep0_req_tag != exception_req_tag) ++ break; ++ if (rc != 0) // STALL on errors ++ fsg_set_halt(fsg, fsg->ep0); ++ else // Complete the status stage ++ ep0_queue(fsg); ++ break; ++ ++ case FSG_STATE_DISCONNECT: ++ for (i = 0; i < fsg->nluns; ++i) ++ fsg_lun_fsync_sub(fsg->luns + i); ++ do_set_config(fsg, 0); // Unconfigured state ++ break; ++ ++ case FSG_STATE_EXIT: ++ case FSG_STATE_TERMINATED: ++ do_set_config(fsg, 0); // Free resources ++ spin_lock_irq(&fsg->lock); ++ fsg->state = FSG_STATE_TERMINATED; // Stop the thread ++ spin_unlock_irq(&fsg->lock); ++ break; ++ } ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int fsg_main_thread(void *fsg_) ++{ ++ struct fsg_dev *fsg = fsg_; ++ ++ /* Allow the thread to be killed by a signal, but set the signal mask ++ * to block everything but INT, TERM, KILL, and USR1. */ ++ allow_signal(SIGINT); ++ allow_signal(SIGTERM); ++ allow_signal(SIGKILL); ++ allow_signal(SIGUSR1); ++ ++ /* Allow the thread to be frozen */ ++ set_freezable(); ++ ++ /* Arrange for userspace references to be interpreted as kernel ++ * pointers. That way we can pass a kernel pointer to a routine ++ * that expects a __user pointer and it will work okay. */ ++ set_fs(get_ds()); ++ ++ /* The main loop */ ++ while (fsg->state != FSG_STATE_TERMINATED) { ++ if (exception_in_progress(fsg) || signal_pending(current)) { ++ handle_exception(fsg); ++ continue; ++ } ++ ++ if (!fsg->running) { ++ sleep_thread(fsg); ++ continue; ++ } ++ ++ if (get_next_command(fsg)) ++ continue; ++ ++ spin_lock_irq(&fsg->lock); ++ if (!exception_in_progress(fsg)) ++ fsg->state = FSG_STATE_DATA_PHASE; ++ spin_unlock_irq(&fsg->lock); ++ ++ if (do_scsi_command(fsg) || finish_reply(fsg)) ++ continue; ++ ++ spin_lock_irq(&fsg->lock); ++ if (!exception_in_progress(fsg)) ++ fsg->state = FSG_STATE_STATUS_PHASE; ++ spin_unlock_irq(&fsg->lock); ++ ++ if (send_status(fsg)) ++ continue; ++ ++ spin_lock_irq(&fsg->lock); ++ if (!exception_in_progress(fsg)) ++ fsg->state = FSG_STATE_IDLE; ++ spin_unlock_irq(&fsg->lock); ++ } ++ ++ spin_lock_irq(&fsg->lock); ++ fsg->thread_task = NULL; ++ spin_unlock_irq(&fsg->lock); ++ ++ /* If we are exiting because of a signal, unregister the ++ * gadget driver. */ ++ if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) ++ usb_gadget_unregister_driver(&fsg_driver); ++ ++ /* Let the unbind and cleanup routines know the thread has exited */ ++ complete_and_exit(&fsg->thread_notifier, 0); ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++ ++/* The write permissions and store_xxx pointers are set in fsg_bind() */ ++static DEVICE_ATTR(ro, 0444, fsg_show_ro, NULL); ++static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, NULL); ++static DEVICE_ATTR(file, 0444, fsg_show_file, NULL); ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void fsg_release(struct kref *ref) ++{ ++ struct fsg_dev *fsg = container_of(ref, struct fsg_dev, ref); ++ ++ kfree(fsg->luns); ++ kfree(fsg); ++} ++ ++static void lun_release(struct device *dev) ++{ ++ struct rw_semaphore *filesem = dev_get_drvdata(dev); ++ struct fsg_dev *fsg = ++ container_of(filesem, struct fsg_dev, filesem); ++ ++ kref_put(&fsg->ref, fsg_release); ++} ++ ++static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) ++{ ++ struct fsg_dev *fsg = get_gadget_data(gadget); ++ int i; ++ struct fsg_lun *curlun; ++ struct usb_request *req = fsg->ep0req; ++ ++ DBG(fsg, "unbind\n"); ++ clear_bit(REGISTERED, &fsg->atomic_bitflags); ++ ++ /* If the thread isn't already dead, tell it to exit now */ ++ if (fsg->state != FSG_STATE_TERMINATED) { ++ raise_exception(fsg, FSG_STATE_EXIT); ++ wait_for_completion(&fsg->thread_notifier); ++ ++ /* The cleanup routine waits for this completion also */ ++ complete(&fsg->thread_notifier); ++ } ++ ++ /* Unregister the sysfs attribute files and the LUNs */ ++ for (i = 0; i < fsg->nluns; ++i) { ++ curlun = &fsg->luns[i]; ++ if (curlun->registered) { ++ device_remove_file(&curlun->dev, &dev_attr_nofua); ++ device_remove_file(&curlun->dev, &dev_attr_ro); ++ device_remove_file(&curlun->dev, &dev_attr_file); ++ fsg_lun_close(curlun); ++ device_unregister(&curlun->dev); ++ curlun->registered = 0; ++ } ++ } ++ ++ /* Free the data buffers */ ++ for (i = 0; i < fsg_num_buffers; ++i) ++ kfree(fsg->buffhds[i].buf); ++ ++ /* Free the request and buffer for endpoint 0 */ ++ if (req) { ++ kfree(req->buf); ++ usb_ep_free_request(fsg->ep0, req); ++ } ++ ++ set_gadget_data(gadget, NULL); ++} ++ ++ ++static int __init check_parameters(struct fsg_dev *fsg) ++{ ++ int prot; ++ int gcnum; ++ ++ /* Store the default values */ ++ mod_data.transport_type = USB_PR_BULK; ++ mod_data.transport_name = "Bulk-only"; ++ mod_data.protocol_type = USB_SC_SCSI; ++ mod_data.protocol_name = "Transparent SCSI"; ++ ++ /* Some peripheral controllers are known not to be able to ++ * halt bulk endpoints correctly. If one of them is present, ++ * disable stalls. ++ */ ++ if (gadget_is_at91(fsg->gadget)) ++ mod_data.can_stall = 0; ++ ++ if (mod_data.release == 0xffff) { // Parameter wasn't set ++ gcnum = usb_gadget_controller_number(fsg->gadget); ++ if (gcnum >= 0) ++ mod_data.release = 0x0300 + gcnum; ++ else { ++ WARNING(fsg, "controller '%s' not recognized\n", ++ fsg->gadget->name); ++ mod_data.release = 0x0399; ++ } ++ } ++ ++ prot = simple_strtol(mod_data.protocol_parm, NULL, 0); ++ ++#ifdef CONFIG_USB_FILE_STORAGE_TEST ++ if (strnicmp(mod_data.transport_parm, "BBB", 10) == 0) { ++ ; // Use default setting ++ } else if (strnicmp(mod_data.transport_parm, "CB", 10) == 0) { ++ mod_data.transport_type = USB_PR_CB; ++ mod_data.transport_name = "Control-Bulk"; ++ } else if (strnicmp(mod_data.transport_parm, "CBI", 10) == 0) { ++ mod_data.transport_type = USB_PR_CBI; ++ mod_data.transport_name = "Control-Bulk-Interrupt"; ++ } else { ++ ERROR(fsg, "invalid transport: %s\n", mod_data.transport_parm); ++ return -EINVAL; ++ } ++ ++ if (strnicmp(mod_data.protocol_parm, "SCSI", 10) == 0 || ++ prot == USB_SC_SCSI) { ++ ; // Use default setting ++ } else if (strnicmp(mod_data.protocol_parm, "RBC", 10) == 0 || ++ prot == USB_SC_RBC) { ++ mod_data.protocol_type = USB_SC_RBC; ++ mod_data.protocol_name = "RBC"; ++ } else if (strnicmp(mod_data.protocol_parm, "8020", 4) == 0 || ++ strnicmp(mod_data.protocol_parm, "ATAPI", 10) == 0 || ++ prot == USB_SC_8020) { ++ mod_data.protocol_type = USB_SC_8020; ++ mod_data.protocol_name = "8020i (ATAPI)"; ++ } else if (strnicmp(mod_data.protocol_parm, "QIC", 3) == 0 || ++ prot == USB_SC_QIC) { ++ mod_data.protocol_type = USB_SC_QIC; ++ mod_data.protocol_name = "QIC-157"; ++ } else if (strnicmp(mod_data.protocol_parm, "UFI", 10) == 0 || ++ prot == USB_SC_UFI) { ++ mod_data.protocol_type = USB_SC_UFI; ++ mod_data.protocol_name = "UFI"; ++ } else if (strnicmp(mod_data.protocol_parm, "8070", 4) == 0 || ++ prot == USB_SC_8070) { ++ mod_data.protocol_type = USB_SC_8070; ++ mod_data.protocol_name = "8070i"; ++ } else { ++ ERROR(fsg, "invalid protocol: %s\n", mod_data.protocol_parm); ++ return -EINVAL; ++ } ++ ++ mod_data.buflen &= PAGE_CACHE_MASK; ++ if (mod_data.buflen <= 0) { ++ ERROR(fsg, "invalid buflen\n"); ++ return -ETOOSMALL; ++ } ++ ++#endif /* CONFIG_USB_FILE_STORAGE_TEST */ ++ ++ /* Serial string handling. ++ * On a real device, the serial string would be loaded ++ * from permanent storage. */ ++ if (mod_data.serial) { ++ const char *ch; ++ unsigned len = 0; ++ ++ /* Sanity check : ++ * The CB[I] specification limits the serial string to ++ * 12 uppercase hexadecimal characters. ++ * BBB need at least 12 uppercase hexadecimal characters, ++ * with a maximum of 126. */ ++ for (ch = mod_data.serial; *ch; ++ch) { ++ ++len; ++ if ((*ch < '0' || *ch > '9') && ++ (*ch < 'A' || *ch > 'F')) { /* not uppercase hex */ ++ WARNING(fsg, ++ "Invalid serial string character: %c\n", ++ *ch); ++ goto no_serial; ++ } ++ } ++ if (len > 126 || ++ (mod_data.transport_type == USB_PR_BULK && len < 12) || ++ (mod_data.transport_type != USB_PR_BULK && len > 12)) { ++ WARNING(fsg, "Invalid serial string length!\n"); ++ goto no_serial; ++ } ++ fsg_strings[FSG_STRING_SERIAL - 1].s = mod_data.serial; ++ } else { ++ WARNING(fsg, "No serial-number string provided!\n"); ++ no_serial: ++ device_desc.iSerialNumber = 0; ++ } ++ ++ return 0; ++} ++ ++ ++static int __init fsg_bind(struct usb_gadget *gadget) ++{ ++ struct fsg_dev *fsg = the_fsg; ++ int rc; ++ int i; ++ struct fsg_lun *curlun; ++ struct usb_ep *ep; ++ struct usb_request *req; ++ char *pathbuf, *p; ++ ++ fsg->gadget = gadget; ++ set_gadget_data(gadget, fsg); ++ fsg->ep0 = gadget->ep0; ++ fsg->ep0->driver_data = fsg; ++ ++ if ((rc = check_parameters(fsg)) != 0) ++ goto out; ++ ++ if (mod_data.removable) { // Enable the store_xxx attributes ++ dev_attr_file.attr.mode = 0644; ++ dev_attr_file.store = fsg_store_file; ++ if (!mod_data.cdrom) { ++ dev_attr_ro.attr.mode = 0644; ++ dev_attr_ro.store = fsg_store_ro; ++ } ++ } ++ ++ /* Only for removable media? */ ++ dev_attr_nofua.attr.mode = 0644; ++ dev_attr_nofua.store = fsg_store_nofua; ++ ++ /* Find out how many LUNs there should be */ ++ i = mod_data.nluns; ++ if (i == 0) ++ i = max(mod_data.num_filenames, 1u); ++ if (i > FSG_MAX_LUNS) { ++ ERROR(fsg, "invalid number of LUNs: %d\n", i); ++ rc = -EINVAL; ++ goto out; ++ } ++ ++ /* Create the LUNs, open their backing files, and register the ++ * LUN devices in sysfs. */ ++ fsg->luns = kzalloc(i * sizeof(struct fsg_lun), GFP_KERNEL); ++ if (!fsg->luns) { ++ rc = -ENOMEM; ++ goto out; ++ } ++ fsg->nluns = i; ++ ++ for (i = 0; i < fsg->nluns; ++i) { ++ curlun = &fsg->luns[i]; ++ curlun->cdrom = !!mod_data.cdrom; ++ curlun->ro = mod_data.cdrom || mod_data.ro[i]; ++ curlun->initially_ro = curlun->ro; ++ curlun->removable = mod_data.removable; ++ curlun->nofua = mod_data.nofua[i]; ++ curlun->dev.release = lun_release; ++ curlun->dev.parent = &gadget->dev; ++ curlun->dev.driver = &fsg_driver.driver; ++ dev_set_drvdata(&curlun->dev, &fsg->filesem); ++ dev_set_name(&curlun->dev,"%s-lun%d", ++ dev_name(&gadget->dev), i); ++ ++ kref_get(&fsg->ref); ++ rc = device_register(&curlun->dev); ++ if (rc) { ++ INFO(fsg, "failed to register LUN%d: %d\n", i, rc); ++ put_device(&curlun->dev); ++ goto out; ++ } ++ curlun->registered = 1; ++ ++ rc = device_create_file(&curlun->dev, &dev_attr_ro); ++ if (rc) ++ goto out; ++ rc = device_create_file(&curlun->dev, &dev_attr_nofua); ++ if (rc) ++ goto out; ++ rc = device_create_file(&curlun->dev, &dev_attr_file); ++ if (rc) ++ goto out; ++ ++ if (mod_data.file[i] && *mod_data.file[i]) { ++ rc = fsg_lun_open(curlun, mod_data.file[i]); ++ if (rc) ++ goto out; ++ } else if (!mod_data.removable) { ++ ERROR(fsg, "no file given for LUN%d\n", i); ++ rc = -EINVAL; ++ goto out; ++ } ++ } ++ ++ /* Find all the endpoints we will use */ ++ usb_ep_autoconfig_reset(gadget); ++ ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc); ++ if (!ep) ++ goto autoconf_fail; ++ ep->driver_data = fsg; // claim the endpoint ++ fsg->bulk_in = ep; ++ ++ ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc); ++ if (!ep) ++ goto autoconf_fail; ++ ep->driver_data = fsg; // claim the endpoint ++ fsg->bulk_out = ep; ++ ++ if (transport_is_cbi()) { ++ ep = usb_ep_autoconfig(gadget, &fsg_fs_intr_in_desc); ++ if (!ep) ++ goto autoconf_fail; ++ ep->driver_data = fsg; // claim the endpoint ++ fsg->intr_in = ep; ++ } ++ ++ /* Fix up the descriptors */ ++ device_desc.idVendor = cpu_to_le16(mod_data.vendor); ++ device_desc.idProduct = cpu_to_le16(mod_data.product); ++ device_desc.bcdDevice = cpu_to_le16(mod_data.release); ++ ++ i = (transport_is_cbi() ? 3 : 2); // Number of endpoints ++ fsg_intf_desc.bNumEndpoints = i; ++ fsg_intf_desc.bInterfaceSubClass = mod_data.protocol_type; ++ fsg_intf_desc.bInterfaceProtocol = mod_data.transport_type; ++ fsg_fs_function[i + FSG_FS_FUNCTION_PRE_EP_ENTRIES] = NULL; ++ ++ if (gadget_is_dualspeed(gadget)) { ++ fsg_hs_function[i + FSG_HS_FUNCTION_PRE_EP_ENTRIES] = NULL; ++ ++ /* Assume endpoint addresses are the same for both speeds */ ++ fsg_hs_bulk_in_desc.bEndpointAddress = ++ fsg_fs_bulk_in_desc.bEndpointAddress; ++ fsg_hs_bulk_out_desc.bEndpointAddress = ++ fsg_fs_bulk_out_desc.bEndpointAddress; ++ fsg_hs_intr_in_desc.bEndpointAddress = ++ fsg_fs_intr_in_desc.bEndpointAddress; ++ } ++ ++ if (gadget_is_superspeed(gadget)) { ++ unsigned max_burst; ++ ++ fsg_ss_function[i + FSG_SS_FUNCTION_PRE_EP_ENTRIES] = NULL; ++ ++ /* Calculate bMaxBurst, we know packet size is 1024 */ ++ max_burst = min_t(unsigned, mod_data.buflen / 1024, 15); ++ ++ /* Assume endpoint addresses are the same for both speeds */ ++ fsg_ss_bulk_in_desc.bEndpointAddress = ++ fsg_fs_bulk_in_desc.bEndpointAddress; ++ fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst; ++ ++ fsg_ss_bulk_out_desc.bEndpointAddress = ++ fsg_fs_bulk_out_desc.bEndpointAddress; ++ fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst; ++ } ++ ++ if (gadget_is_otg(gadget)) ++ fsg_otg_desc.bmAttributes |= USB_OTG_HNP; ++ ++ rc = -ENOMEM; ++ ++ /* Allocate the request and buffer for endpoint 0 */ ++ fsg->ep0req = req = usb_ep_alloc_request(fsg->ep0, GFP_KERNEL); ++ if (!req) ++ goto out; ++ req->buf = kmalloc(EP0_BUFSIZE, GFP_KERNEL); ++ if (!req->buf) ++ goto out; ++ req->complete = ep0_complete; ++ ++ /* Allocate the data buffers */ ++ for (i = 0; i < fsg_num_buffers; ++i) { ++ struct fsg_buffhd *bh = &fsg->buffhds[i]; ++ ++ /* Allocate for the bulk-in endpoint. We assume that ++ * the buffer will also work with the bulk-out (and ++ * interrupt-in) endpoint. */ ++ bh->buf = kmalloc(mod_data.buflen, GFP_KERNEL); ++ if (!bh->buf) ++ goto out; ++ bh->next = bh + 1; ++ } ++ fsg->buffhds[fsg_num_buffers - 1].next = &fsg->buffhds[0]; ++ ++ /* This should reflect the actual gadget power source */ ++ usb_gadget_set_selfpowered(gadget); ++ ++ snprintf(fsg_string_manufacturer, sizeof fsg_string_manufacturer, ++ "%s %s with %s", ++ init_utsname()->sysname, init_utsname()->release, ++ gadget->name); ++ ++ fsg->thread_task = kthread_create(fsg_main_thread, fsg, ++ "file-storage-gadget"); ++ if (IS_ERR(fsg->thread_task)) { ++ rc = PTR_ERR(fsg->thread_task); ++ goto out; ++ } ++ ++ INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n"); ++ INFO(fsg, "NOTE: This driver is deprecated. " ++ "Consider using g_mass_storage instead.\n"); ++ INFO(fsg, "Number of LUNs=%d\n", fsg->nluns); ++ ++ pathbuf = kmalloc(PATH_MAX, GFP_KERNEL); ++ for (i = 0; i < fsg->nluns; ++i) { ++ curlun = &fsg->luns[i]; ++ if (fsg_lun_is_open(curlun)) { ++ p = NULL; ++ if (pathbuf) { ++ p = d_path(&curlun->filp->f_path, ++ pathbuf, PATH_MAX); ++ if (IS_ERR(p)) ++ p = NULL; ++ } ++ LINFO(curlun, "ro=%d, nofua=%d, file: %s\n", ++ curlun->ro, curlun->nofua, (p ? p : "(error)")); ++ } ++ } ++ kfree(pathbuf); ++ ++ DBG(fsg, "transport=%s (x%02x)\n", ++ mod_data.transport_name, mod_data.transport_type); ++ DBG(fsg, "protocol=%s (x%02x)\n", ++ mod_data.protocol_name, mod_data.protocol_type); ++ DBG(fsg, "VendorID=x%04x, ProductID=x%04x, Release=x%04x\n", ++ mod_data.vendor, mod_data.product, mod_data.release); ++ DBG(fsg, "removable=%d, stall=%d, cdrom=%d, buflen=%u\n", ++ mod_data.removable, mod_data.can_stall, ++ mod_data.cdrom, mod_data.buflen); ++ DBG(fsg, "I/O thread pid: %d\n", task_pid_nr(fsg->thread_task)); ++ ++ set_bit(REGISTERED, &fsg->atomic_bitflags); ++ ++ /* Tell the thread to start working */ ++ wake_up_process(fsg->thread_task); ++ return 0; ++ ++autoconf_fail: ++ ERROR(fsg, "unable to autoconfigure all endpoints\n"); ++ rc = -ENOTSUPP; ++ ++out: ++ fsg->state = FSG_STATE_TERMINATED; // The thread is dead ++ fsg_unbind(gadget); ++ complete(&fsg->thread_notifier); ++ return rc; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void fsg_suspend(struct usb_gadget *gadget) ++{ ++ struct fsg_dev *fsg = get_gadget_data(gadget); ++ ++ DBG(fsg, "suspend\n"); ++ set_bit(SUSPENDED, &fsg->atomic_bitflags); ++} ++ ++static void fsg_resume(struct usb_gadget *gadget) ++{ ++ struct fsg_dev *fsg = get_gadget_data(gadget); ++ ++ DBG(fsg, "resume\n"); ++ clear_bit(SUSPENDED, &fsg->atomic_bitflags); ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static struct usb_gadget_driver fsg_driver = { ++ .max_speed = USB_SPEED_SUPER, ++ .function = (char *) fsg_string_product, ++ .unbind = fsg_unbind, ++ .disconnect = fsg_disconnect, ++ .setup = fsg_setup, ++ .suspend = fsg_suspend, ++ .resume = fsg_resume, ++ ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ // .release = ... ++ // .suspend = ... ++ // .resume = ... ++ }, ++}; ++ ++ ++static int __init fsg_alloc(void) ++{ ++ struct fsg_dev *fsg; ++ ++ fsg = kzalloc(sizeof *fsg + ++ fsg_num_buffers * sizeof *(fsg->buffhds), GFP_KERNEL); ++ ++ if (!fsg) ++ return -ENOMEM; ++ spin_lock_init(&fsg->lock); ++ init_rwsem(&fsg->filesem); ++ kref_init(&fsg->ref); ++ init_completion(&fsg->thread_notifier); ++ ++ the_fsg = fsg; ++ return 0; ++} ++ ++ ++static int __init fsg_init(void) ++{ ++ int rc; ++ struct fsg_dev *fsg; ++ ++ rc = fsg_num_buffers_validate(); ++ if (rc != 0) ++ return rc; ++ ++ if ((rc = fsg_alloc()) != 0) ++ return rc; ++ fsg = the_fsg; ++ if ((rc = usb_gadget_probe_driver(&fsg_driver, fsg_bind)) != 0) ++ kref_put(&fsg->ref, fsg_release); ++ return rc; ++} ++module_init(fsg_init); ++ ++ ++static void __exit fsg_cleanup(void) ++{ ++ struct fsg_dev *fsg = the_fsg; ++ ++ /* Unregister the driver iff the thread hasn't already done so */ ++ if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) ++ usb_gadget_unregister_driver(&fsg_driver); ++ ++ /* Wait for the thread to finish up */ ++ wait_for_completion(&fsg->thread_notifier); ++ ++ kref_put(&fsg->ref, fsg_release); ++} ++module_exit(fsg_cleanup); +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -663,6 +663,19 @@ config USB_HWA_HCD + To compile this driver a module, choose M here: the module + will be called "hwa-hc". + ++config USB_DWCOTG ++ tristate "Synopsis DWC host support" ++ depends on USB ++ help ++ The Synopsis DWC controller is a dual-role ++ host/peripheral/OTG ("On The Go") USB controllers. ++ ++ Enable this option to support this IP in host controller mode. ++ If unsure, say N. ++ ++ To compile this driver as a module, choose M here: the ++ modules built will be called dwc_otg and dwc_common_port. ++ + config USB_IMX21_HCD + tristate "i.MX21 HCD support" + depends on ARM && ARCH_MXC +--- a/drivers/usb/host/Makefile ++++ b/drivers/usb/host/Makefile +@@ -47,6 +47,8 @@ obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o + obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o + obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o + obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o ++ ++obj-$(CONFIG_USB_DWCOTG) += dwc_otg/ dwc_common_port/ + obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o + obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o + obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/Makefile +@@ -0,0 +1,58 @@ ++# ++# Makefile for DWC_common library ++# ++ ++ifneq ($(KERNELRELEASE),) ++ ++EXTRA_CFLAGS += -DDWC_LINUX ++#EXTRA_CFLAGS += -DDEBUG ++#EXTRA_CFLAGS += -DDWC_DEBUG_REGS ++#EXTRA_CFLAGS += -DDWC_DEBUG_MEMORY ++ ++EXTRA_CFLAGS += -DDWC_LIBMODULE ++EXTRA_CFLAGS += -DDWC_CCLIB ++#EXTRA_CFLAGS += -DDWC_CRYPTOLIB ++EXTRA_CFLAGS += -DDWC_NOTIFYLIB ++EXTRA_CFLAGS += -DDWC_UTFLIB ++ ++obj-$(CONFIG_USB_DWCOTG) += dwc_common_port_lib.o ++dwc_common_port_lib-objs := dwc_cc.o dwc_modpow.o dwc_dh.o \ ++ dwc_crypto.o dwc_notifier.o \ ++ dwc_common_linux.o dwc_mem.o ++ ++kernrelwd := $(subst ., ,$(KERNELRELEASE)) ++kernrel3 := $(word 1,$(kernrelwd)).$(word 2,$(kernrelwd)).$(word 3,$(kernrelwd)) ++ ++ifneq ($(kernrel3),2.6.20) ++# grayg - I only know that we use EXTRA_CFLAGS in 2.6.31 actually ++EXTRA_CFLAGS += $(CPPFLAGS) ++endif ++ ++else ++ ++#ifeq ($(KDIR),) ++#$(error Must give "KDIR=/path/to/kernel/source" on command line or in environment) ++#endif ++ ++ifeq ($(ARCH),) ++$(error Must give "ARCH=<arch>" on command line or in environment. Also, if \ ++ cross-compiling, must give "CROSS_COMPILE=/path/to/compiler/plus/tool-prefix-") ++endif ++ ++ifeq ($(DOXYGEN),) ++DOXYGEN := doxygen ++endif ++ ++default: ++ $(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules ++ ++docs: $(wildcard *.[hc]) doc/doxygen.cfg ++ $(DOXYGEN) doc/doxygen.cfg ++ ++tags: $(wildcard *.[hc]) ++ $(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h) ++ ++endif ++ ++clean: ++ rm -rf *.o *.ko .*.cmd *.mod.c .*.o.d .*.o.tmp modules.order Module.markers Module.symvers .tmp_versions/ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/Makefile.fbsd +@@ -0,0 +1,17 @@ ++CFLAGS += -I/sys/i386/compile/GENERIC -I/sys/i386/include -I/usr/include ++CFLAGS += -DDWC_FREEBSD ++CFLAGS += -DDEBUG ++#CFLAGS += -DDWC_DEBUG_REGS ++#CFLAGS += -DDWC_DEBUG_MEMORY ++ ++#CFLAGS += -DDWC_LIBMODULE ++#CFLAGS += -DDWC_CCLIB ++#CFLAGS += -DDWC_CRYPTOLIB ++#CFLAGS += -DDWC_NOTIFYLIB ++#CFLAGS += -DDWC_UTFLIB ++ ++KMOD = dwc_common_port_lib ++SRCS = dwc_cc.c dwc_modpow.c dwc_dh.c dwc_crypto.c dwc_notifier.c \ ++ dwc_common_fbsd.c dwc_mem.c ++ ++.include <bsd.kmod.mk> +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/Makefile.linux +@@ -0,0 +1,49 @@ ++# ++# Makefile for DWC_common library ++# ++ifneq ($(KERNELRELEASE),) ++ ++EXTRA_CFLAGS += -DDWC_LINUX ++#EXTRA_CFLAGS += -DDEBUG ++#EXTRA_CFLAGS += -DDWC_DEBUG_REGS ++#EXTRA_CFLAGS += -DDWC_DEBUG_MEMORY ++ ++EXTRA_CFLAGS += -DDWC_LIBMODULE ++EXTRA_CFLAGS += -DDWC_CCLIB ++EXTRA_CFLAGS += -DDWC_CRYPTOLIB ++EXTRA_CFLAGS += -DDWC_NOTIFYLIB ++EXTRA_CFLAGS += -DDWC_UTFLIB ++ ++obj-m := dwc_common_port_lib.o ++dwc_common_port_lib-objs := dwc_cc.o dwc_modpow.o dwc_dh.o \ ++ dwc_crypto.o dwc_notifier.o \ ++ dwc_common_linux.o dwc_mem.o ++ ++else ++ ++ifeq ($(KDIR),) ++$(error Must give "KDIR=/path/to/kernel/source" on command line or in environment) ++endif ++ ++ifeq ($(ARCH),) ++$(error Must give "ARCH=<arch>" on command line or in environment. Also, if \ ++ cross-compiling, must give "CROSS_COMPILE=/path/to/compiler/plus/tool-prefix-") ++endif ++ ++ifeq ($(DOXYGEN),) ++DOXYGEN := doxygen ++endif ++ ++default: ++ $(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules ++ ++docs: $(wildcard *.[hc]) doc/doxygen.cfg ++ $(DOXYGEN) doc/doxygen.cfg ++ ++tags: $(wildcard *.[hc]) ++ $(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h) ++ ++endif ++ ++clean: ++ rm -rf *.o *.ko .*.cmd *.mod.c .*.o.d .*.o.tmp modules.order Module.markers Module.symvers .tmp_versions/ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/changes.txt +@@ -0,0 +1,174 @@ ++ ++dwc_read_reg32() and friends now take an additional parameter, a pointer to an ++IO context struct. The IO context struct should live in an os-dependent struct ++in your driver. As an example, the dwc_usb3 driver has an os-dependent struct ++named 'os_dep' embedded in the main device struct. So there these calls look ++like this: ++ ++ dwc_read_reg32(&usb3_dev->os_dep.ioctx, &pcd->dev_global_regs->dcfg); ++ ++ dwc_write_reg32(&usb3_dev->os_dep.ioctx, ++ &pcd->dev_global_regs->dcfg, 0); ++ ++Note that for the existing Linux driver ports, it is not necessary to actually ++define the 'ioctx' member in the os-dependent struct. Since Linux does not ++require an IO context, its macros for dwc_read_reg32() and friends do not ++use the context pointer, so it is optimized away by the compiler. But it is ++necessary to add the pointer parameter to all of the call sites, to be ready ++for any future ports (such as FreeBSD) which do require an IO context. ++ ++ ++Similarly, dwc_alloc(), dwc_alloc_atomic(), dwc_strdup(), and dwc_free() now ++take an additional parameter, a pointer to a memory context. Examples: ++ ++ addr = dwc_alloc(&usb3_dev->os_dep.memctx, size); ++ ++ dwc_free(&usb3_dev->os_dep.memctx, addr); ++ ++Again, for the Linux ports, it is not necessary to actually define the memctx ++member, but it is necessary to add the pointer parameter to all of the call ++sites. ++ ++ ++Same for dwc_dma_alloc() and dwc_dma_free(). Examples: ++ ++ virt_addr = dwc_dma_alloc(&usb3_dev->os_dep.dmactx, size, &phys_addr); ++ ++ dwc_dma_free(&usb3_dev->os_dep.dmactx, size, virt_addr, phys_addr); ++ ++ ++Same for dwc_mutex_alloc() and dwc_mutex_free(). Examples: ++ ++ mutex = dwc_mutex_alloc(&usb3_dev->os_dep.mtxctx); ++ ++ dwc_mutex_free(&usb3_dev->os_dep.mtxctx, mutex); ++ ++ ++Same for dwc_spinlock_alloc() and dwc_spinlock_free(). Examples: ++ ++ lock = dwc_spinlock_alloc(&usb3_dev->osdep.splctx); ++ ++ dwc_spinlock_free(&usb3_dev->osdep.splctx, lock); ++ ++ ++Same for dwc_timer_alloc(). Example: ++ ++ timer = dwc_timer_alloc(&usb3_dev->os_dep.tmrctx, "dwc_usb3_tmr1", ++ cb_func, cb_data); ++ ++ ++Same for dwc_waitq_alloc(). Example: ++ ++ waitq = dwc_waitq_alloc(&usb3_dev->os_dep.wtqctx); ++ ++ ++Same for dwc_thread_run(). Example: ++ ++ thread = dwc_thread_run(&usb3_dev->os_dep.thdctx, func, ++ "dwc_usb3_thd1", data); ++ ++ ++Same for dwc_workq_alloc(). Example: ++ ++ workq = dwc_workq_alloc(&usb3_dev->osdep.wkqctx, "dwc_usb3_wkq1"); ++ ++ ++Same for dwc_task_alloc(). Example: ++ ++ task = dwc_task_alloc(&usb3_dev->os_dep.tskctx, "dwc_usb3_tsk1", ++ cb_func, cb_data); ++ ++ ++In addition to the context pointer additions, a few core functions have had ++other changes made to their parameters: ++ ++The 'flags' parameter to dwc_spinlock_irqsave() and dwc_spinunlock_irqrestore() ++has been changed from a uint64_t to a dwc_irqflags_t. ++ ++dwc_thread_should_stop() now takes a 'dwc_thread_t *' parameter, because the ++FreeBSD equivalent of that function requires it. ++ ++And, in addition to the context pointer, dwc_task_alloc() also adds a ++'char *name' parameter, to be consistent with dwc_thread_run() and ++dwc_workq_alloc(), and because the FreeBSD equivalent of that function ++requires a unique name. ++ ++ ++Here is a complete list of the core functions that now take a pointer to a ++context as their first parameter: ++ ++ dwc_read_reg32 ++ dwc_read_reg64 ++ dwc_write_reg32 ++ dwc_write_reg64 ++ dwc_modify_reg32 ++ dwc_modify_reg64 ++ dwc_alloc ++ dwc_alloc_atomic ++ dwc_strdup ++ dwc_free ++ dwc_dma_alloc ++ dwc_dma_free ++ dwc_mutex_alloc ++ dwc_mutex_free ++ dwc_spinlock_alloc ++ dwc_spinlock_free ++ dwc_timer_alloc ++ dwc_waitq_alloc ++ dwc_thread_run ++ dwc_workq_alloc ++ dwc_task_alloc Also adds a 'char *name' as its 2nd parameter ++ ++And here are the core functions that have other changes to their parameters: ++ ++ dwc_spinlock_irqsave 'flags' param is now a 'dwc_irqflags_t *' ++ dwc_spinunlock_irqrestore 'flags' param is now a 'dwc_irqflags_t' ++ dwc_thread_should_stop Adds a 'dwc_thread_t *' parameter ++ ++ ++ ++The changes to the core functions also require some of the other library ++functions to change: ++ ++ dwc_cc_if_alloc() and dwc_cc_if_free() now take a 'void *memctx' ++ (for memory allocation) as the 1st param and a 'void *mtxctx' ++ (for mutex allocation) as the 2nd param. ++ ++ dwc_cc_clear(), dwc_cc_add(), dwc_cc_change(), dwc_cc_remove(), ++ dwc_cc_data_for_save(), and dwc_cc_restore_from_data() now take a ++ 'void *memctx' as the 1st param. ++ ++ dwc_dh_modpow(), dwc_dh_pk(), and dwc_dh_derive_keys() now take a ++ 'void *memctx' as the 1st param. ++ ++ dwc_modpow() now takes a 'void *memctx' as the 1st param. ++ ++ dwc_alloc_notification_manager() now takes a 'void *memctx' as the ++ 1st param and a 'void *wkqctx' (for work queue allocation) as the 2nd ++ param, and also now returns an integer value that is non-zero if ++ allocation of its data structures or work queue fails. ++ ++ dwc_register_notifier() now takes a 'void *memctx' as the 1st param. ++ ++ dwc_memory_debug_start() now takes a 'void *mem_ctx' as the first ++ param, and also now returns an integer value that is non-zero if ++ allocation of its data structures fails. ++ ++ ++ ++Other miscellaneous changes: ++ ++The DEBUG_MEMORY and DEBUG_REGS #define's have been renamed to ++DWC_DEBUG_MEMORY and DWC_DEBUG_REGS. ++ ++The following #define's have been added to allow selectively compiling library ++features: ++ ++ DWC_CCLIB ++ DWC_CRYPTOLIB ++ DWC_NOTIFYLIB ++ DWC_UTFLIB ++ ++A DWC_LIBMODULE #define has also been added. If this is not defined, then the ++module code in dwc_common_linux.c is not compiled in. This allows linking the ++library code directly into a driver module, instead of as a standalone module. +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/doc/doxygen.cfg +@@ -0,0 +1,270 @@ ++# Doxyfile 1.4.5 ++ ++#--------------------------------------------------------------------------- ++# Project related configuration options ++#--------------------------------------------------------------------------- ++PROJECT_NAME = "Synopsys DWC Portability and Common Library for UWB" ++PROJECT_NUMBER = ++OUTPUT_DIRECTORY = doc ++CREATE_SUBDIRS = NO ++OUTPUT_LANGUAGE = English ++BRIEF_MEMBER_DESC = YES ++REPEAT_BRIEF = YES ++ABBREVIATE_BRIEF = "The $name class" \ ++ "The $name widget" \ ++ "The $name file" \ ++ is \ ++ provides \ ++ specifies \ ++ contains \ ++ represents \ ++ a \ ++ an \ ++ the ++ALWAYS_DETAILED_SEC = YES ++INLINE_INHERITED_MEMB = NO ++FULL_PATH_NAMES = NO ++STRIP_FROM_PATH = .. ++STRIP_FROM_INC_PATH = ++SHORT_NAMES = NO ++JAVADOC_AUTOBRIEF = YES ++MULTILINE_CPP_IS_BRIEF = NO ++DETAILS_AT_TOP = YES ++INHERIT_DOCS = YES ++SEPARATE_MEMBER_PAGES = NO ++TAB_SIZE = 8 ++ALIASES = ++OPTIMIZE_OUTPUT_FOR_C = YES ++OPTIMIZE_OUTPUT_JAVA = NO ++BUILTIN_STL_SUPPORT = NO ++DISTRIBUTE_GROUP_DOC = NO ++SUBGROUPING = NO ++#--------------------------------------------------------------------------- ++# Build related configuration options ++#--------------------------------------------------------------------------- ++EXTRACT_ALL = NO ++EXTRACT_PRIVATE = NO ++EXTRACT_STATIC = YES ++EXTRACT_LOCAL_CLASSES = NO ++EXTRACT_LOCAL_METHODS = NO ++HIDE_UNDOC_MEMBERS = NO ++HIDE_UNDOC_CLASSES = NO ++HIDE_FRIEND_COMPOUNDS = NO ++HIDE_IN_BODY_DOCS = NO ++INTERNAL_DOCS = NO ++CASE_SENSE_NAMES = YES ++HIDE_SCOPE_NAMES = NO ++SHOW_INCLUDE_FILES = NO ++INLINE_INFO = YES ++SORT_MEMBER_DOCS = NO ++SORT_BRIEF_DOCS = NO ++SORT_BY_SCOPE_NAME = NO ++GENERATE_TODOLIST = YES ++GENERATE_TESTLIST = YES ++GENERATE_BUGLIST = YES ++GENERATE_DEPRECATEDLIST= YES ++ENABLED_SECTIONS = ++MAX_INITIALIZER_LINES = 30 ++SHOW_USED_FILES = YES ++SHOW_DIRECTORIES = YES ++FILE_VERSION_FILTER = ++#--------------------------------------------------------------------------- ++# configuration options related to warning and progress messages ++#--------------------------------------------------------------------------- ++QUIET = YES ++WARNINGS = YES ++WARN_IF_UNDOCUMENTED = NO ++WARN_IF_DOC_ERROR = YES ++WARN_NO_PARAMDOC = YES ++WARN_FORMAT = "$file:$line: $text" ++WARN_LOGFILE = ++#--------------------------------------------------------------------------- ++# configuration options related to the input files ++#--------------------------------------------------------------------------- ++INPUT = . ++FILE_PATTERNS = *.c \ ++ *.cc \ ++ *.cxx \ ++ *.cpp \ ++ *.c++ \ ++ *.d \ ++ *.java \ ++ *.ii \ ++ *.ixx \ ++ *.ipp \ ++ *.i++ \ ++ *.inl \ ++ *.h \ ++ *.hh \ ++ *.hxx \ ++ *.hpp \ ++ *.h++ \ ++ *.idl \ ++ *.odl \ ++ *.cs \ ++ *.php \ ++ *.php3 \ ++ *.inc \ ++ *.m \ ++ *.mm \ ++ *.dox \ ++ *.py \ ++ *.C \ ++ *.CC \ ++ *.C++ \ ++ *.II \ ++ *.I++ \ ++ *.H \ ++ *.HH \ ++ *.H++ \ ++ *.CS \ ++ *.PHP \ ++ *.PHP3 \ ++ *.M \ ++ *.MM \ ++ *.PY ++RECURSIVE = NO ++EXCLUDE = ++EXCLUDE_SYMLINKS = NO ++EXCLUDE_PATTERNS = ++EXAMPLE_PATH = ++EXAMPLE_PATTERNS = * ++EXAMPLE_RECURSIVE = NO ++IMAGE_PATH = ++INPUT_FILTER = ++FILTER_PATTERNS = ++FILTER_SOURCE_FILES = NO ++#--------------------------------------------------------------------------- ++# configuration options related to source browsing ++#--------------------------------------------------------------------------- ++SOURCE_BROWSER = NO ++INLINE_SOURCES = NO ++STRIP_CODE_COMMENTS = YES ++REFERENCED_BY_RELATION = YES ++REFERENCES_RELATION = YES ++USE_HTAGS = NO ++VERBATIM_HEADERS = NO ++#--------------------------------------------------------------------------- ++# configuration options related to the alphabetical class index ++#--------------------------------------------------------------------------- ++ALPHABETICAL_INDEX = NO ++COLS_IN_ALPHA_INDEX = 5 ++IGNORE_PREFIX = ++#--------------------------------------------------------------------------- ++# configuration options related to the HTML output ++#--------------------------------------------------------------------------- ++GENERATE_HTML = YES ++HTML_OUTPUT = html ++HTML_FILE_EXTENSION = .html ++HTML_HEADER = ++HTML_FOOTER = ++HTML_STYLESHEET = ++HTML_ALIGN_MEMBERS = YES ++GENERATE_HTMLHELP = NO ++CHM_FILE = ++HHC_LOCATION = ++GENERATE_CHI = NO ++BINARY_TOC = NO ++TOC_EXPAND = NO ++DISABLE_INDEX = NO ++ENUM_VALUES_PER_LINE = 4 ++GENERATE_TREEVIEW = YES ++TREEVIEW_WIDTH = 250 ++#--------------------------------------------------------------------------- ++# configuration options related to the LaTeX output ++#--------------------------------------------------------------------------- ++GENERATE_LATEX = NO ++LATEX_OUTPUT = latex ++LATEX_CMD_NAME = latex ++MAKEINDEX_CMD_NAME = makeindex ++COMPACT_LATEX = NO ++PAPER_TYPE = a4wide ++EXTRA_PACKAGES = ++LATEX_HEADER = ++PDF_HYPERLINKS = NO ++USE_PDFLATEX = NO ++LATEX_BATCHMODE = NO ++LATEX_HIDE_INDICES = NO ++#--------------------------------------------------------------------------- ++# configuration options related to the RTF output ++#--------------------------------------------------------------------------- ++GENERATE_RTF = NO ++RTF_OUTPUT = rtf ++COMPACT_RTF = NO ++RTF_HYPERLINKS = NO ++RTF_STYLESHEET_FILE = ++RTF_EXTENSIONS_FILE = ++#--------------------------------------------------------------------------- ++# configuration options related to the man page output ++#--------------------------------------------------------------------------- ++GENERATE_MAN = NO ++MAN_OUTPUT = man ++MAN_EXTENSION = .3 ++MAN_LINKS = NO ++#--------------------------------------------------------------------------- ++# configuration options related to the XML output ++#--------------------------------------------------------------------------- ++GENERATE_XML = NO ++XML_OUTPUT = xml ++XML_SCHEMA = ++XML_DTD = ++XML_PROGRAMLISTING = YES ++#--------------------------------------------------------------------------- ++# configuration options for the AutoGen Definitions output ++#--------------------------------------------------------------------------- ++GENERATE_AUTOGEN_DEF = NO ++#--------------------------------------------------------------------------- ++# configuration options related to the Perl module output ++#--------------------------------------------------------------------------- ++GENERATE_PERLMOD = NO ++PERLMOD_LATEX = NO ++PERLMOD_PRETTY = YES ++PERLMOD_MAKEVAR_PREFIX = ++#--------------------------------------------------------------------------- ++# Configuration options related to the preprocessor ++#--------------------------------------------------------------------------- ++ENABLE_PREPROCESSING = YES ++MACRO_EXPANSION = NO ++EXPAND_ONLY_PREDEF = NO ++SEARCH_INCLUDES = YES ++INCLUDE_PATH = ++INCLUDE_FILE_PATTERNS = ++PREDEFINED = DEBUG DEBUG_MEMORY ++EXPAND_AS_DEFINED = ++SKIP_FUNCTION_MACROS = YES ++#--------------------------------------------------------------------------- ++# Configuration::additions related to external references ++#--------------------------------------------------------------------------- ++TAGFILES = ++GENERATE_TAGFILE = ++ALLEXTERNALS = NO ++EXTERNAL_GROUPS = YES ++PERL_PATH = /usr/bin/perl ++#--------------------------------------------------------------------------- ++# Configuration options related to the dot tool ++#--------------------------------------------------------------------------- ++CLASS_DIAGRAMS = YES ++HIDE_UNDOC_RELATIONS = YES ++HAVE_DOT = NO ++CLASS_GRAPH = YES ++COLLABORATION_GRAPH = YES ++GROUP_GRAPHS = YES ++UML_LOOK = NO ++TEMPLATE_RELATIONS = NO ++INCLUDE_GRAPH = NO ++INCLUDED_BY_GRAPH = YES ++CALL_GRAPH = NO ++GRAPHICAL_HIERARCHY = YES ++DIRECTORY_GRAPH = YES ++DOT_IMAGE_FORMAT = png ++DOT_PATH = ++DOTFILE_DIRS = ++MAX_DOT_GRAPH_DEPTH = 1000 ++DOT_TRANSPARENT = NO ++DOT_MULTI_TARGETS = NO ++GENERATE_LEGEND = YES ++DOT_CLEANUP = YES ++#--------------------------------------------------------------------------- ++# Configuration::additions related to the search engine ++#--------------------------------------------------------------------------- ++SEARCHENGINE = NO +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_cc.c +@@ -0,0 +1,532 @@ ++/* ========================================================================= ++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_cc.c $ ++ * $Revision: #4 $ ++ * $Date: 2010/11/04 $ ++ * $Change: 1621692 $ ++ * ++ * Synopsys Portability Library Software and documentation ++ * (hereinafter, "Software") is an Unsupported proprietary work of ++ * Synopsys, Inc. unless otherwise expressly agreed to in writing ++ * between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product ++ * under any End User Software License Agreement or Agreement for ++ * Licensed Product with Synopsys or any supplement thereto. You are ++ * permitted to use and redistribute this Software in source and binary ++ * forms, with or without modification, provided that redistributions ++ * of source code must retain this notice. You may not view, use, ++ * disclose, copy or distribute this file or any information contained ++ * herein except pursuant to this license grant from Synopsys. If you ++ * do not agree with this notice, including the disclaimer below, then ++ * you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" ++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL ++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY ++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE ++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================= */ ++#ifdef DWC_CCLIB ++ ++#include "dwc_cc.h" ++ ++typedef struct dwc_cc ++{ ++ uint32_t uid; ++ uint8_t chid[16]; ++ uint8_t cdid[16]; ++ uint8_t ck[16]; ++ uint8_t *name; ++ uint8_t length; ++ DWC_CIRCLEQ_ENTRY(dwc_cc) list_entry; ++} dwc_cc_t; ++ ++DWC_CIRCLEQ_HEAD(context_list, dwc_cc); ++ ++/** The main structure for CC management. */ ++struct dwc_cc_if ++{ ++ dwc_mutex_t *mutex; ++ char *filename; ++ ++ unsigned is_host:1; ++ ++ dwc_notifier_t *notifier; ++ ++ struct context_list list; ++}; ++ ++#ifdef DEBUG ++static inline void dump_bytes(char *name, uint8_t *bytes, int len) ++{ ++ int i; ++ DWC_PRINTF("%s: ", name); ++ for (i=0; i<len; i++) { ++ DWC_PRINTF("%02x ", bytes[i]); ++ } ++ DWC_PRINTF("\n"); ++} ++#else ++#define dump_bytes(x...) ++#endif ++ ++static dwc_cc_t *alloc_cc(void *mem_ctx, uint8_t *name, uint32_t length) ++{ ++ dwc_cc_t *cc = dwc_alloc(mem_ctx, sizeof(dwc_cc_t)); ++ if (!cc) { ++ return NULL; ++ } ++ DWC_MEMSET(cc, 0, sizeof(dwc_cc_t)); ++ ++ if (name) { ++ cc->length = length; ++ cc->name = dwc_alloc(mem_ctx, length); ++ if (!cc->name) { ++ dwc_free(mem_ctx, cc); ++ return NULL; ++ } ++ ++ DWC_MEMCPY(cc->name, name, length); ++ } ++ ++ return cc; ++} ++ ++static void free_cc(void *mem_ctx, dwc_cc_t *cc) ++{ ++ if (cc->name) { ++ dwc_free(mem_ctx, cc->name); ++ } ++ dwc_free(mem_ctx, cc); ++} ++ ++static uint32_t next_uid(dwc_cc_if_t *cc_if) ++{ ++ uint32_t uid = 0; ++ dwc_cc_t *cc; ++ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { ++ if (cc->uid > uid) { ++ uid = cc->uid; ++ } ++ } ++ ++ if (uid == 0) { ++ uid = 255; ++ } ++ ++ return uid + 1; ++} ++ ++static dwc_cc_t *cc_find(dwc_cc_if_t *cc_if, uint32_t uid) ++{ ++ dwc_cc_t *cc; ++ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { ++ if (cc->uid == uid) { ++ return cc; ++ } ++ } ++ return NULL; ++} ++ ++static unsigned int cc_data_size(dwc_cc_if_t *cc_if) ++{ ++ unsigned int size = 0; ++ dwc_cc_t *cc; ++ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { ++ size += (48 + 1); ++ if (cc->name) { ++ size += cc->length; ++ } ++ } ++ return size; ++} ++ ++static uint32_t cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid) ++{ ++ uint32_t uid = 0; ++ dwc_cc_t *cc; ++ ++ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { ++ if (DWC_MEMCMP(cc->chid, chid, 16) == 0) { ++ uid = cc->uid; ++ break; ++ } ++ } ++ return uid; ++} ++static uint32_t cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid) ++{ ++ uint32_t uid = 0; ++ dwc_cc_t *cc; ++ ++ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { ++ if (DWC_MEMCMP(cc->cdid, cdid, 16) == 0) { ++ uid = cc->uid; ++ break; ++ } ++ } ++ return uid; ++} ++ ++/* Internal cc_add */ ++static int32_t cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid, ++ uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length) ++{ ++ dwc_cc_t *cc; ++ uint32_t uid; ++ ++ if (cc_if->is_host) { ++ uid = cc_match_cdid(cc_if, cdid); ++ } ++ else { ++ uid = cc_match_chid(cc_if, chid); ++ } ++ ++ if (uid) { ++ DWC_DEBUGC("Replacing previous connection context id=%d name=%p name_len=%d", uid, name, length); ++ cc = cc_find(cc_if, uid); ++ } ++ else { ++ cc = alloc_cc(mem_ctx, name, length); ++ cc->uid = next_uid(cc_if); ++ DWC_CIRCLEQ_INSERT_TAIL(&cc_if->list, cc, list_entry); ++ } ++ ++ DWC_MEMCPY(&(cc->chid[0]), chid, 16); ++ DWC_MEMCPY(&(cc->cdid[0]), cdid, 16); ++ DWC_MEMCPY(&(cc->ck[0]), ck, 16); ++ ++ DWC_DEBUGC("Added connection context id=%d name=%p name_len=%d", cc->uid, name, length); ++ dump_bytes("CHID", cc->chid, 16); ++ dump_bytes("CDID", cc->cdid, 16); ++ dump_bytes("CK", cc->ck, 16); ++ return cc->uid; ++} ++ ++/* Internal cc_clear */ ++static void cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if) ++{ ++ while (!DWC_CIRCLEQ_EMPTY(&cc_if->list)) { ++ dwc_cc_t *cc = DWC_CIRCLEQ_FIRST(&cc_if->list); ++ DWC_CIRCLEQ_REMOVE_INIT(&cc_if->list, cc, list_entry); ++ free_cc(mem_ctx, cc); ++ } ++} ++ ++dwc_cc_if_t *dwc_cc_if_alloc(void *mem_ctx, void *mtx_ctx, ++ dwc_notifier_t *notifier, unsigned is_host) ++{ ++ dwc_cc_if_t *cc_if = NULL; ++ ++ /* Allocate a common_cc_if structure */ ++ cc_if = dwc_alloc(mem_ctx, sizeof(dwc_cc_if_t)); ++ ++ if (!cc_if) ++ return NULL; ++ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) ++ DWC_MUTEX_ALLOC_LINUX_DEBUG(cc_if->mutex); ++#else ++ cc_if->mutex = dwc_mutex_alloc(mtx_ctx); ++#endif ++ if (!cc_if->mutex) { ++ dwc_free(mem_ctx, cc_if); ++ return NULL; ++ } ++ ++ DWC_CIRCLEQ_INIT(&cc_if->list); ++ cc_if->is_host = is_host; ++ cc_if->notifier = notifier; ++ return cc_if; ++} ++ ++void dwc_cc_if_free(void *mem_ctx, void *mtx_ctx, dwc_cc_if_t *cc_if) ++{ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) ++ DWC_MUTEX_FREE(cc_if->mutex); ++#else ++ dwc_mutex_free(mtx_ctx, cc_if->mutex); ++#endif ++ cc_clear(mem_ctx, cc_if); ++ dwc_free(mem_ctx, cc_if); ++} ++ ++static void cc_changed(dwc_cc_if_t *cc_if) ++{ ++ if (cc_if->notifier) { ++ dwc_notify(cc_if->notifier, DWC_CC_LIST_CHANGED_NOTIFICATION, cc_if); ++ } ++} ++ ++void dwc_cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if) ++{ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc_clear(mem_ctx, cc_if); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ cc_changed(cc_if); ++} ++ ++int32_t dwc_cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid, ++ uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length) ++{ ++ uint32_t uid; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ uid = cc_add(mem_ctx, cc_if, chid, cdid, ck, name, length); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ cc_changed(cc_if); ++ ++ return uid; ++} ++ ++void dwc_cc_change(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id, uint8_t *chid, ++ uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length) ++{ ++ dwc_cc_t* cc; ++ ++ DWC_DEBUGC("Change connection context %d", id); ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc = cc_find(cc_if, id); ++ if (!cc) { ++ DWC_ERROR("Uid %d not found in cc list\n", id); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return; ++ } ++ ++ if (chid) { ++ DWC_MEMCPY(&(cc->chid[0]), chid, 16); ++ } ++ if (cdid) { ++ DWC_MEMCPY(&(cc->cdid[0]), cdid, 16); ++ } ++ if (ck) { ++ DWC_MEMCPY(&(cc->ck[0]), ck, 16); ++ } ++ ++ if (name) { ++ if (cc->name) { ++ dwc_free(mem_ctx, cc->name); ++ } ++ cc->name = dwc_alloc(mem_ctx, length); ++ if (!cc->name) { ++ DWC_ERROR("Out of memory in dwc_cc_change()\n"); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return; ++ } ++ cc->length = length; ++ DWC_MEMCPY(cc->name, name, length); ++ } ++ ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ cc_changed(cc_if); ++ ++ DWC_DEBUGC("Changed connection context id=%d\n", id); ++ dump_bytes("New CHID", cc->chid, 16); ++ dump_bytes("New CDID", cc->cdid, 16); ++ dump_bytes("New CK", cc->ck, 16); ++} ++ ++void dwc_cc_remove(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id) ++{ ++ dwc_cc_t *cc; ++ ++ DWC_DEBUGC("Removing connection context %d", id); ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc = cc_find(cc_if, id); ++ if (!cc) { ++ DWC_ERROR("Uid %d not found in cc list\n", id); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return; ++ } ++ ++ DWC_CIRCLEQ_REMOVE_INIT(&cc_if->list, cc, list_entry); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ free_cc(mem_ctx, cc); ++ ++ cc_changed(cc_if); ++} ++ ++uint8_t *dwc_cc_data_for_save(void *mem_ctx, dwc_cc_if_t *cc_if, unsigned int *length) ++{ ++ uint8_t *buf, *x; ++ uint8_t zero = 0; ++ dwc_cc_t *cc; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ *length = cc_data_size(cc_if); ++ if (!(*length)) { ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return NULL; ++ } ++ ++ DWC_DEBUGC("Creating data for saving (length=%d)", *length); ++ ++ buf = dwc_alloc(mem_ctx, *length); ++ if (!buf) { ++ *length = 0; ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return NULL; ++ } ++ ++ x = buf; ++ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { ++ DWC_MEMCPY(x, cc->chid, 16); ++ x += 16; ++ DWC_MEMCPY(x, cc->cdid, 16); ++ x += 16; ++ DWC_MEMCPY(x, cc->ck, 16); ++ x += 16; ++ if (cc->name) { ++ DWC_MEMCPY(x, &cc->length, 1); ++ x += 1; ++ DWC_MEMCPY(x, cc->name, cc->length); ++ x += cc->length; ++ } ++ else { ++ DWC_MEMCPY(x, &zero, 1); ++ x += 1; ++ } ++ } ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ return buf; ++} ++ ++void dwc_cc_restore_from_data(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *data, uint32_t length) ++{ ++ uint8_t name_length; ++ uint8_t *name; ++ uint8_t *chid; ++ uint8_t *cdid; ++ uint8_t *ck; ++ uint32_t i = 0; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc_clear(mem_ctx, cc_if); ++ ++ while (i < length) { ++ chid = &data[i]; ++ i += 16; ++ cdid = &data[i]; ++ i += 16; ++ ck = &data[i]; ++ i += 16; ++ ++ name_length = data[i]; ++ i ++; ++ ++ if (name_length) { ++ name = &data[i]; ++ i += name_length; ++ } ++ else { ++ name = NULL; ++ } ++ ++ /* check to see if we haven't overflown the buffer */ ++ if (i > length) { ++ DWC_ERROR("Data format error while attempting to load CCs " ++ "(nlen=%d, iter=%d, buflen=%d).\n", name_length, i, length); ++ break; ++ } ++ ++ cc_add(mem_ctx, cc_if, chid, cdid, ck, name, name_length); ++ } ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ cc_changed(cc_if); ++} ++ ++uint32_t dwc_cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid) ++{ ++ uint32_t uid = 0; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ uid = cc_match_chid(cc_if, chid); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return uid; ++} ++uint32_t dwc_cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid) ++{ ++ uint32_t uid = 0; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ uid = cc_match_cdid(cc_if, cdid); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return uid; ++} ++ ++uint8_t *dwc_cc_ck(dwc_cc_if_t *cc_if, int32_t id) ++{ ++ uint8_t *ck = NULL; ++ dwc_cc_t *cc; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc = cc_find(cc_if, id); ++ if (cc) { ++ ck = cc->ck; ++ } ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ return ck; ++ ++} ++ ++uint8_t *dwc_cc_chid(dwc_cc_if_t *cc_if, int32_t id) ++{ ++ uint8_t *retval = NULL; ++ dwc_cc_t *cc; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc = cc_find(cc_if, id); ++ if (cc) { ++ retval = cc->chid; ++ } ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ return retval; ++} ++ ++uint8_t *dwc_cc_cdid(dwc_cc_if_t *cc_if, int32_t id) ++{ ++ uint8_t *retval = NULL; ++ dwc_cc_t *cc; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc = cc_find(cc_if, id); ++ if (cc) { ++ retval = cc->cdid; ++ } ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ return retval; ++} ++ ++uint8_t *dwc_cc_name(dwc_cc_if_t *cc_if, int32_t id, uint8_t *length) ++{ ++ uint8_t *retval = NULL; ++ dwc_cc_t *cc; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ *length = 0; ++ cc = cc_find(cc_if, id); ++ if (cc) { ++ *length = cc->length; ++ retval = cc->name; ++ } ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ return retval; ++} ++ ++#endif /* DWC_CCLIB */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_cc.h +@@ -0,0 +1,225 @@ ++/* ========================================================================= ++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_cc.h $ ++ * $Revision: #4 $ ++ * $Date: 2010/09/28 $ ++ * $Change: 1596182 $ ++ * ++ * Synopsys Portability Library Software and documentation ++ * (hereinafter, "Software") is an Unsupported proprietary work of ++ * Synopsys, Inc. unless otherwise expressly agreed to in writing ++ * between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product ++ * under any End User Software License Agreement or Agreement for ++ * Licensed Product with Synopsys or any supplement thereto. You are ++ * permitted to use and redistribute this Software in source and binary ++ * forms, with or without modification, provided that redistributions ++ * of source code must retain this notice. You may not view, use, ++ * disclose, copy or distribute this file or any information contained ++ * herein except pursuant to this license grant from Synopsys. If you ++ * do not agree with this notice, including the disclaimer below, then ++ * you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" ++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL ++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY ++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE ++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================= */ ++#ifndef _DWC_CC_H_ ++#define _DWC_CC_H_ ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++/** @file ++ * ++ * This file defines the Context Context library. ++ * ++ * The main data structure is dwc_cc_if_t which is returned by either the ++ * dwc_cc_if_alloc function or returned by the module to the user via a provided ++ * function. The data structure is opaque and should only be manipulated via the ++ * functions provied in this API. ++ * ++ * It manages a list of connection contexts and operations can be performed to ++ * add, remove, query, search, and change, those contexts. Additionally, ++ * a dwc_notifier_t object can be requested from the manager so that ++ * the user can be notified whenever the context list has changed. ++ */ ++ ++#include "dwc_os.h" ++#include "dwc_list.h" ++#include "dwc_notifier.h" ++ ++ ++/* Notifications */ ++#define DWC_CC_LIST_CHANGED_NOTIFICATION "DWC_CC_LIST_CHANGED_NOTIFICATION" ++ ++struct dwc_cc_if; ++typedef struct dwc_cc_if dwc_cc_if_t; ++ ++ ++/** @name Connection Context Operations */ ++/** @{ */ ++ ++/** This function allocates memory for a dwc_cc_if_t structure, initializes ++ * fields to default values, and returns a pointer to the structure or NULL on ++ * error. */ ++extern dwc_cc_if_t *dwc_cc_if_alloc(void *mem_ctx, void *mtx_ctx, ++ dwc_notifier_t *notifier, unsigned is_host); ++ ++/** Frees the memory for the specified CC structure allocated from ++ * dwc_cc_if_alloc(). */ ++extern void dwc_cc_if_free(void *mem_ctx, void *mtx_ctx, dwc_cc_if_t *cc_if); ++ ++/** Removes all contexts from the connection context list */ ++extern void dwc_cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if); ++ ++/** Adds a connection context (CHID, CK, CDID, Name) to the connection context list. ++ * If a CHID already exists, the CK and name are overwritten. Statistics are ++ * not overwritten. ++ * ++ * @param cc_if The cc_if structure. ++ * @param chid A pointer to the 16-byte CHID. This value will be copied. ++ * @param ck A pointer to the 16-byte CK. This value will be copied. ++ * @param cdid A pointer to the 16-byte CDID. This value will be copied. ++ * @param name An optional host friendly name as defined in the association model ++ * spec. Must be a UTF16-LE unicode string. Can be NULL to indicated no name. ++ * @param length The length othe unicode string. ++ * @return A unique identifier used to refer to this context that is valid for ++ * as long as this context is still in the list. */ ++extern int32_t dwc_cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid, ++ uint8_t *cdid, uint8_t *ck, uint8_t *name, ++ uint8_t length); ++ ++/** Changes the CHID, CK, CDID, or Name values of a connection context in the ++ * list, preserving any accumulated statistics. This would typically be called ++ * if the host decideds to change the context with a SET_CONNECTION request. ++ * ++ * @param cc_if The cc_if structure. ++ * @param id The identifier of the connection context. ++ * @param chid A pointer to the 16-byte CHID. This value will be copied. NULL ++ * indicates no change. ++ * @param cdid A pointer to the 16-byte CDID. This value will be copied. NULL ++ * indicates no change. ++ * @param ck A pointer to the 16-byte CK. This value will be copied. NULL ++ * indicates no change. ++ * @param name Host friendly name UTF16-LE. NULL indicates no change. ++ * @param length Length of name. */ ++extern void dwc_cc_change(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id, ++ uint8_t *chid, uint8_t *cdid, uint8_t *ck, ++ uint8_t *name, uint8_t length); ++ ++/** Remove the specified connection context. ++ * @param cc_if The cc_if structure. ++ * @param id The identifier of the connection context to remove. */ ++extern void dwc_cc_remove(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id); ++ ++/** Get a binary block of data for the connection context list and attributes. ++ * This data can be used by the OS specific driver to save the connection ++ * context list into non-volatile memory. ++ * ++ * @param cc_if The cc_if structure. ++ * @param length Return the length of the data buffer. ++ * @return A pointer to the data buffer. The memory for this buffer should be ++ * freed with DWC_FREE() after use. */ ++extern uint8_t *dwc_cc_data_for_save(void *mem_ctx, dwc_cc_if_t *cc_if, ++ unsigned int *length); ++ ++/** Restore the connection context list from the binary data that was previously ++ * returned from a call to dwc_cc_data_for_save. This can be used by the OS specific ++ * driver to load a connection context list from non-volatile memory. ++ * ++ * @param cc_if The cc_if structure. ++ * @param data The data bytes as returned from dwc_cc_data_for_save. ++ * @param length The length of the data. */ ++extern void dwc_cc_restore_from_data(void *mem_ctx, dwc_cc_if_t *cc_if, ++ uint8_t *data, unsigned int length); ++ ++/** Find the connection context from the specified CHID. ++ * ++ * @param cc_if The cc_if structure. ++ * @param chid A pointer to the CHID data. ++ * @return A non-zero identifier of the connection context if the CHID matches. ++ * Otherwise returns 0. */ ++extern uint32_t dwc_cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid); ++ ++/** Find the connection context from the specified CDID. ++ * ++ * @param cc_if The cc_if structure. ++ * @param cdid A pointer to the CDID data. ++ * @return A non-zero identifier of the connection context if the CHID matches. ++ * Otherwise returns 0. */ ++extern uint32_t dwc_cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid); ++ ++/** Retrieve the CK from the specified connection context. ++ * ++ * @param cc_if The cc_if structure. ++ * @param id The identifier of the connection context. ++ * @return A pointer to the CK data. The memory does not need to be freed. */ ++extern uint8_t *dwc_cc_ck(dwc_cc_if_t *cc_if, int32_t id); ++ ++/** Retrieve the CHID from the specified connection context. ++ * ++ * @param cc_if The cc_if structure. ++ * @param id The identifier of the connection context. ++ * @return A pointer to the CHID data. The memory does not need to be freed. */ ++extern uint8_t *dwc_cc_chid(dwc_cc_if_t *cc_if, int32_t id); ++ ++/** Retrieve the CDID from the specified connection context. ++ * ++ * @param cc_if The cc_if structure. ++ * @param id The identifier of the connection context. ++ * @return A pointer to the CDID data. The memory does not need to be freed. */ ++extern uint8_t *dwc_cc_cdid(dwc_cc_if_t *cc_if, int32_t id); ++ ++extern uint8_t *dwc_cc_name(dwc_cc_if_t *cc_if, int32_t id, uint8_t *length); ++ ++/** Checks a buffer for non-zero. ++ * @param id A pointer to a 16 byte buffer. ++ * @return true if the 16 byte value is non-zero. */ ++static inline unsigned dwc_assoc_is_not_zero_id(uint8_t *id) { ++ int i; ++ for (i=0; i<16; i++) { ++ if (id[i]) return 1; ++ } ++ return 0; ++} ++ ++/** Checks a buffer for zero. ++ * @param id A pointer to a 16 byte buffer. ++ * @return true if the 16 byte value is zero. */ ++static inline unsigned dwc_assoc_is_zero_id(uint8_t *id) { ++ return !dwc_assoc_is_not_zero_id(id); ++} ++ ++/** Prints an ASCII representation for the 16-byte chid, cdid, or ck, into ++ * buffer. */ ++static inline int dwc_print_id_string(char *buffer, uint8_t *id) { ++ char *ptr = buffer; ++ int i; ++ for (i=0; i<16; i++) { ++ ptr += DWC_SPRINTF(ptr, "%02x", id[i]); ++ if (i < 15) { ++ ptr += DWC_SPRINTF(ptr, " "); ++ } ++ } ++ return ptr - buffer; ++} ++ ++/** @} */ ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* _DWC_CC_H_ */ ++ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_common_fbsd.c +@@ -0,0 +1,1308 @@ ++#include "dwc_os.h" ++#include "dwc_list.h" ++ ++#ifdef DWC_CCLIB ++# include "dwc_cc.h" ++#endif ++ ++#ifdef DWC_CRYPTOLIB ++# include "dwc_modpow.h" ++# include "dwc_dh.h" ++# include "dwc_crypto.h" ++#endif ++ ++#ifdef DWC_NOTIFYLIB ++# include "dwc_notifier.h" ++#endif ++ ++/* OS-Level Implementations */ ++ ++/* This is the FreeBSD 7.0 kernel implementation of the DWC platform library. */ ++ ++ ++/* MISC */ ++ ++void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size) ++{ ++ return memset(dest, byte, size); ++} ++ ++void *DWC_MEMCPY(void *dest, void const *src, uint32_t size) ++{ ++ return memcpy(dest, src, size); ++} ++ ++void *DWC_MEMMOVE(void *dest, void *src, uint32_t size) ++{ ++ bcopy(src, dest, size); ++ return dest; ++} ++ ++int DWC_MEMCMP(void *m1, void *m2, uint32_t size) ++{ ++ return memcmp(m1, m2, size); ++} ++ ++int DWC_STRNCMP(void *s1, void *s2, uint32_t size) ++{ ++ return strncmp(s1, s2, size); ++} ++ ++int DWC_STRCMP(void *s1, void *s2) ++{ ++ return strcmp(s1, s2); ++} ++ ++int DWC_STRLEN(char const *str) ++{ ++ return strlen(str); ++} ++ ++char *DWC_STRCPY(char *to, char const *from) ++{ ++ return strcpy(to, from); ++} ++ ++char *DWC_STRDUP(char const *str) ++{ ++ int len = DWC_STRLEN(str) + 1; ++ char *new = DWC_ALLOC_ATOMIC(len); ++ ++ if (!new) { ++ return NULL; ++ } ++ ++ DWC_MEMCPY(new, str, len); ++ return new; ++} ++ ++int DWC_ATOI(char *str, int32_t *value) ++{ ++ char *end = NULL; ++ ++ *value = strtol(str, &end, 0); ++ if (*end == '\0') { ++ return 0; ++ } ++ ++ return -1; ++} ++ ++int DWC_ATOUI(char *str, uint32_t *value) ++{ ++ char *end = NULL; ++ ++ *value = strtoul(str, &end, 0); ++ if (*end == '\0') { ++ return 0; ++ } ++ ++ return -1; ++} ++ ++ ++#ifdef DWC_UTFLIB ++/* From usbstring.c */ ++ ++int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len) ++{ ++ int count = 0; ++ u8 c; ++ u16 uchar; ++ ++ /* this insists on correct encodings, though not minimal ones. ++ * BUT it currently rejects legit 4-byte UTF-8 code points, ++ * which need surrogate pairs. (Unicode 3.1 can use them.) ++ */ ++ while (len != 0 && (c = (u8) *s++) != 0) { ++ if (unlikely(c & 0x80)) { ++ // 2-byte sequence: ++ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx ++ if ((c & 0xe0) == 0xc0) { ++ uchar = (c & 0x1f) << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ // 3-byte sequence (most CJKV characters): ++ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx ++ } else if ((c & 0xf0) == 0xe0) { ++ uchar = (c & 0x0f) << 12; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ /* no bogus surrogates */ ++ if (0xd800 <= uchar && uchar <= 0xdfff) ++ goto fail; ++ ++ // 4-byte sequence (surrogate pairs, currently rare): ++ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx ++ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx ++ // (uuuuu = wwww + 1) ++ // FIXME accept the surrogate code points (only) ++ } else ++ goto fail; ++ } else ++ uchar = c; ++ put_unaligned (cpu_to_le16 (uchar), cp++); ++ count++; ++ len--; ++ } ++ return count; ++fail: ++ return -1; ++} ++ ++#endif /* DWC_UTFLIB */ ++ ++ ++/* dwc_debug.h */ ++ ++dwc_bool_t DWC_IN_IRQ(void) ++{ ++// return in_irq(); ++ return 0; ++} ++ ++dwc_bool_t DWC_IN_BH(void) ++{ ++// return in_softirq(); ++ return 0; ++} ++ ++void DWC_VPRINTF(char *format, va_list args) ++{ ++ vprintf(format, args); ++} ++ ++int DWC_VSNPRINTF(char *str, int size, char *format, va_list args) ++{ ++ return vsnprintf(str, size, format, args); ++} ++ ++void DWC_PRINTF(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++int DWC_SPRINTF(char *buffer, char *format, ...) ++{ ++ int retval; ++ va_list args; ++ ++ va_start(args, format); ++ retval = vsprintf(buffer, format, args); ++ va_end(args); ++ return retval; ++} ++ ++int DWC_SNPRINTF(char *buffer, int size, char *format, ...) ++{ ++ int retval; ++ va_list args; ++ ++ va_start(args, format); ++ retval = vsnprintf(buffer, size, format, args); ++ va_end(args); ++ return retval; ++} ++ ++void __DWC_WARN(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++void __DWC_ERROR(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++void DWC_EXCEPTION(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++// BUG_ON(1); ??? ++} ++ ++#ifdef DEBUG ++void __DWC_DEBUG(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++#endif ++ ++ ++/* dwc_mem.h */ ++ ++#if 0 ++dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, ++ uint32_t align, ++ uint32_t alloc) ++{ ++ struct dma_pool *pool = dma_pool_create("Pool", NULL, ++ size, align, alloc); ++ return (dwc_pool_t *)pool; ++} ++ ++void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool) ++{ ++ dma_pool_destroy((struct dma_pool *)pool); ++} ++ ++void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr) ++{ ++// return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr); ++ return dma_pool_alloc((struct dma_pool *)pool, M_WAITOK, dma_addr); ++} ++ ++void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr) ++{ ++ void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr); ++ memset(..); ++} ++ ++void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr) ++{ ++ dma_pool_free(pool, vaddr, daddr); ++} ++#endif ++ ++static void dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error) ++{ ++ if (error) ++ return; ++ *(bus_addr_t *)arg = segs[0].ds_addr; ++} ++ ++void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr) ++{ ++ dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx; ++ int error; ++ ++ error = bus_dma_tag_create( ++#if __FreeBSD_version >= 700000 ++ bus_get_dma_tag(dma->dev), /* parent */ ++#else ++ NULL, /* parent */ ++#endif ++ 4, 0, /* alignment, bounds */ ++ BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ ++ BUS_SPACE_MAXADDR, /* highaddr */ ++ NULL, NULL, /* filter, filterarg */ ++ size, /* maxsize */ ++ 1, /* nsegments */ ++ size, /* maxsegsize */ ++ 0, /* flags */ ++ NULL, /* lockfunc */ ++ NULL, /* lockarg */ ++ &dma->dma_tag); ++ if (error) { ++ device_printf(dma->dev, "%s: bus_dma_tag_create failed: %d\n", ++ __func__, error); ++ goto fail_0; ++ } ++ ++ error = bus_dmamem_alloc(dma->dma_tag, &dma->dma_vaddr, ++ BUS_DMA_NOWAIT | BUS_DMA_COHERENT, &dma->dma_map); ++ if (error) { ++ device_printf(dma->dev, "%s: bus_dmamem_alloc(%ju) failed: %d\n", ++ __func__, (uintmax_t)size, error); ++ goto fail_1; ++ } ++ ++ dma->dma_paddr = 0; ++ error = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr, size, ++ dmamap_cb, &dma->dma_paddr, BUS_DMA_NOWAIT); ++ if (error || dma->dma_paddr == 0) { ++ device_printf(dma->dev, "%s: bus_dmamap_load failed: %d\n", ++ __func__, error); ++ goto fail_2; ++ } ++ ++ *dma_addr = dma->dma_paddr; ++ return dma->dma_vaddr; ++ ++fail_2: ++ bus_dmamap_unload(dma->dma_tag, dma->dma_map); ++fail_1: ++ bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map); ++ bus_dma_tag_destroy(dma->dma_tag); ++fail_0: ++ dma->dma_map = NULL; ++ dma->dma_tag = NULL; ++ ++ return NULL; ++} ++ ++void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr) ++{ ++ dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx; ++ ++ if (dma->dma_tag == NULL) ++ return; ++ if (dma->dma_map != NULL) { ++ bus_dmamap_sync(dma->dma_tag, dma->dma_map, ++ BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); ++ bus_dmamap_unload(dma->dma_tag, dma->dma_map); ++ bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map); ++ dma->dma_map = NULL; ++ } ++ ++ bus_dma_tag_destroy(dma->dma_tag); ++ dma->dma_tag = NULL; ++} ++ ++void *__DWC_ALLOC(void *mem_ctx, uint32_t size) ++{ ++ return malloc(size, M_DEVBUF, M_WAITOK | M_ZERO); ++} ++ ++void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size) ++{ ++ return malloc(size, M_DEVBUF, M_NOWAIT | M_ZERO); ++} ++ ++void __DWC_FREE(void *mem_ctx, void *addr) ++{ ++ free(addr, M_DEVBUF); ++} ++ ++ ++#ifdef DWC_CRYPTOLIB ++/* dwc_crypto.h */ ++ ++void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length) ++{ ++ get_random_bytes(buffer, length); ++} ++ ++int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out) ++{ ++ struct crypto_blkcipher *tfm; ++ struct blkcipher_desc desc; ++ struct scatterlist sgd; ++ struct scatterlist sgs; ++ ++ tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC); ++ if (tfm == NULL) { ++ printk("failed to load transform for aes CBC\n"); ++ return -1; ++ } ++ ++ crypto_blkcipher_setkey(tfm, key, keylen); ++ crypto_blkcipher_set_iv(tfm, iv, 16); ++ ++ sg_init_one(&sgd, out, messagelen); ++ sg_init_one(&sgs, message, messagelen); ++ ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) { ++ crypto_free_blkcipher(tfm); ++ DWC_ERROR("AES CBC encryption failed"); ++ return -1; ++ } ++ ++ crypto_free_blkcipher(tfm); ++ return 0; ++} ++ ++int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out) ++{ ++ struct crypto_hash *tfm; ++ struct hash_desc desc; ++ struct scatterlist sg; ++ ++ tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC); ++ if (IS_ERR(tfm)) { ++ DWC_ERROR("Failed to load transform for sha256: %ld", PTR_ERR(tfm)); ++ return 0; ++ } ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ sg_init_one(&sg, message, len); ++ crypto_hash_digest(&desc, &sg, len, out); ++ crypto_free_hash(tfm); ++ ++ return 1; ++} ++ ++int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, ++ uint8_t *key, uint32_t keylen, uint8_t *out) ++{ ++ struct crypto_hash *tfm; ++ struct hash_desc desc; ++ struct scatterlist sg; ++ ++ tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC); ++ if (IS_ERR(tfm)) { ++ DWC_ERROR("Failed to load transform for hmac(sha256): %ld", PTR_ERR(tfm)); ++ return 0; ++ } ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ sg_init_one(&sg, message, messagelen); ++ crypto_hash_setkey(tfm, key, keylen); ++ crypto_hash_digest(&desc, &sg, messagelen, out); ++ crypto_free_hash(tfm); ++ ++ return 1; ++} ++ ++#endif /* DWC_CRYPTOLIB */ ++ ++ ++/* Byte Ordering Conversions */ ++ ++uint32_t DWC_CPU_TO_LE32(uint32_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_CPU_TO_BE32(uint32_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_LE32_TO_CPU(uint32_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_BE32_TO_CPU(uint32_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint16_t DWC_CPU_TO_LE16(uint16_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_CPU_TO_BE16(uint16_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_LE16_TO_CPU(uint16_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_BE16_TO_CPU(uint16_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++ ++/* Registers */ ++ ++uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ return bus_space_read_4(io->iot, io->ioh, ior); ++} ++ ++#if 0 ++uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ return bus_space_read_8(io->iot, io->ioh, ior); ++} ++#endif ++ ++void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ bus_space_write_4(io->iot, io->ioh, ior, value); ++} ++ ++#if 0 ++void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ bus_space_write_8(io->iot, io->ioh, ior, value); ++} ++#endif ++ ++void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask, ++ uint32_t set_mask) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ bus_space_write_4(io->iot, io->ioh, ior, ++ (bus_space_read_4(io->iot, io->ioh, ior) & ++ ~clear_mask) | set_mask); ++} ++ ++#if 0 ++void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask, ++ uint64_t set_mask) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ bus_space_write_8(io->iot, io->ioh, ior, ++ (bus_space_read_8(io->iot, io->ioh, ior) & ++ ~clear_mask) | set_mask); ++} ++#endif ++ ++ ++/* Locking */ ++ ++dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void) ++{ ++ struct mtx *sl = DWC_ALLOC(sizeof(*sl)); ++ ++ if (!sl) { ++ DWC_ERROR("Cannot allocate memory for spinlock"); ++ return NULL; ++ } ++ ++ mtx_init(sl, "dw3spn", NULL, MTX_SPIN); ++ return (dwc_spinlock_t *)sl; ++} ++ ++void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock) ++{ ++ struct mtx *sl = (struct mtx *)lock; ++ ++ mtx_destroy(sl); ++ DWC_FREE(sl); ++} ++ ++void DWC_SPINLOCK(dwc_spinlock_t *lock) ++{ ++ mtx_lock_spin((struct mtx *)lock); // ??? ++} ++ ++void DWC_SPINUNLOCK(dwc_spinlock_t *lock) ++{ ++ mtx_unlock_spin((struct mtx *)lock); // ??? ++} ++ ++void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags) ++{ ++ mtx_lock_spin((struct mtx *)lock); ++} ++ ++void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags) ++{ ++ mtx_unlock_spin((struct mtx *)lock); ++} ++ ++dwc_mutex_t *DWC_MUTEX_ALLOC(void) ++{ ++ struct mtx *m; ++ dwc_mutex_t *mutex = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mtx)); ++ ++ if (!mutex) { ++ DWC_ERROR("Cannot allocate memory for mutex"); ++ return NULL; ++ } ++ ++ m = (struct mtx *)mutex; ++ mtx_init(m, "dw3mtx", NULL, MTX_DEF); ++ return mutex; ++} ++ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) ++#else ++void DWC_MUTEX_FREE(dwc_mutex_t *mutex) ++{ ++ mtx_destroy((struct mtx *)mutex); ++ DWC_FREE(mutex); ++} ++#endif ++ ++void DWC_MUTEX_LOCK(dwc_mutex_t *mutex) ++{ ++ struct mtx *m = (struct mtx *)mutex; ++ ++ mtx_lock(m); ++} ++ ++int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex) ++{ ++ struct mtx *m = (struct mtx *)mutex; ++ ++ return mtx_trylock(m); ++} ++ ++void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex) ++{ ++ struct mtx *m = (struct mtx *)mutex; ++ ++ mtx_unlock(m); ++} ++ ++ ++/* Timing */ ++ ++void DWC_UDELAY(uint32_t usecs) ++{ ++ DELAY(usecs); ++} ++ ++void DWC_MDELAY(uint32_t msecs) ++{ ++ do { ++ DELAY(1000); ++ } while (--msecs); ++} ++ ++void DWC_MSLEEP(uint32_t msecs) ++{ ++ struct timeval tv; ++ ++ tv.tv_sec = msecs / 1000; ++ tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000; ++ pause("dw3slp", tvtohz(&tv)); ++} ++ ++uint32_t DWC_TIME(void) ++{ ++ struct timeval tv; ++ ++ microuptime(&tv); // or getmicrouptime? (less precise, but faster) ++ return tv.tv_sec * 1000 + tv.tv_usec / 1000; ++} ++ ++ ++/* Timers */ ++ ++struct dwc_timer { ++ struct callout t; ++ char *name; ++ dwc_spinlock_t *lock; ++ dwc_timer_callback_t cb; ++ void *data; ++}; ++ ++dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data) ++{ ++ dwc_timer_t *t = DWC_ALLOC(sizeof(*t)); ++ ++ if (!t) { ++ DWC_ERROR("Cannot allocate memory for timer"); ++ return NULL; ++ } ++ ++ callout_init(&t->t, 1); ++ ++ t->name = DWC_STRDUP(name); ++ if (!t->name) { ++ DWC_ERROR("Cannot allocate memory for timer->name"); ++ goto no_name; ++ } ++ ++ t->lock = DWC_SPINLOCK_ALLOC(); ++ if (!t->lock) { ++ DWC_ERROR("Cannot allocate memory for lock"); ++ goto no_lock; ++ } ++ ++ t->cb = cb; ++ t->data = data; ++ ++ return t; ++ ++ no_lock: ++ DWC_FREE(t->name); ++ no_name: ++ DWC_FREE(t); ++ ++ return NULL; ++} ++ ++void DWC_TIMER_FREE(dwc_timer_t *timer) ++{ ++ callout_stop(&timer->t); ++ DWC_SPINLOCK_FREE(timer->lock); ++ DWC_FREE(timer->name); ++ DWC_FREE(timer); ++} ++ ++void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time) ++{ ++ struct timeval tv; ++ ++ tv.tv_sec = time / 1000; ++ tv.tv_usec = (time - tv.tv_sec * 1000) * 1000; ++ callout_reset(&timer->t, tvtohz(&tv), timer->cb, timer->data); ++} ++ ++void DWC_TIMER_CANCEL(dwc_timer_t *timer) ++{ ++ callout_stop(&timer->t); ++} ++ ++ ++/* Wait Queues */ ++ ++struct dwc_waitq { ++ struct mtx lock; ++ int abort; ++}; ++ ++dwc_waitq_t *DWC_WAITQ_ALLOC(void) ++{ ++ dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq)); ++ ++ if (!wq) { ++ DWC_ERROR("Cannot allocate memory for waitqueue"); ++ return NULL; ++ } ++ ++ mtx_init(&wq->lock, "dw3wtq", NULL, MTX_DEF); ++ wq->abort = 0; ++ ++ return wq; ++} ++ ++void DWC_WAITQ_FREE(dwc_waitq_t *wq) ++{ ++ mtx_destroy(&wq->lock); ++ DWC_FREE(wq); ++} ++ ++int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data) ++{ ++// intrmask_t ipl; ++ int result = 0; ++ ++ mtx_lock(&wq->lock); ++// ipl = splbio(); ++ ++ /* Skip the sleep if already aborted or triggered */ ++ if (!wq->abort && !cond(data)) { ++// splx(ipl); ++ result = msleep(wq, &wq->lock, PCATCH, "dw3wat", 0); // infinite timeout ++// ipl = splbio(); ++ } ++ ++ if (result == ERESTART) { // signaled - restart ++ result = -DWC_E_RESTART; ++ ++ } else if (result == EINTR) { // signaled - interrupt ++ result = -DWC_E_ABORT; ++ ++ } else if (wq->abort) { ++ result = -DWC_E_ABORT; ++ ++ } else { ++ result = 0; ++ } ++ ++ wq->abort = 0; ++// splx(ipl); ++ mtx_unlock(&wq->lock); ++ return result; ++} ++ ++int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, ++ void *data, int32_t msecs) ++{ ++ struct timeval tv, tv1, tv2; ++// intrmask_t ipl; ++ int result = 0; ++ ++ tv.tv_sec = msecs / 1000; ++ tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000; ++ ++ mtx_lock(&wq->lock); ++// ipl = splbio(); ++ ++ /* Skip the sleep if already aborted or triggered */ ++ if (!wq->abort && !cond(data)) { ++// splx(ipl); ++ getmicrouptime(&tv1); ++ result = msleep(wq, &wq->lock, PCATCH, "dw3wto", tvtohz(&tv)); ++ getmicrouptime(&tv2); ++// ipl = splbio(); ++ } ++ ++ if (result == 0) { // awoken ++ if (wq->abort) { ++ result = -DWC_E_ABORT; ++ } else { ++ tv2.tv_usec -= tv1.tv_usec; ++ if (tv2.tv_usec < 0) { ++ tv2.tv_usec += 1000000; ++ tv2.tv_sec--; ++ } ++ ++ tv2.tv_sec -= tv1.tv_sec; ++ result = tv2.tv_sec * 1000 + tv2.tv_usec / 1000; ++ result = msecs - result; ++ if (result <= 0) ++ result = 1; ++ } ++ } else if (result == ERESTART) { // signaled - restart ++ result = -DWC_E_RESTART; ++ ++ } else if (result == EINTR) { // signaled - interrupt ++ result = -DWC_E_ABORT; ++ ++ } else { // timed out ++ result = -DWC_E_TIMEOUT; ++ } ++ ++ wq->abort = 0; ++// splx(ipl); ++ mtx_unlock(&wq->lock); ++ return result; ++} ++ ++void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq) ++{ ++ wakeup(wq); ++} ++ ++void DWC_WAITQ_ABORT(dwc_waitq_t *wq) ++{ ++// intrmask_t ipl; ++ ++ mtx_lock(&wq->lock); ++// ipl = splbio(); ++ wq->abort = 1; ++ wakeup(wq); ++// splx(ipl); ++ mtx_unlock(&wq->lock); ++} ++ ++ ++/* Threading */ ++ ++struct dwc_thread { ++ struct proc *proc; ++ int abort; ++}; ++ ++dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data) ++{ ++ int retval; ++ dwc_thread_t *thread = DWC_ALLOC(sizeof(*thread)); ++ ++ if (!thread) { ++ return NULL; ++ } ++ ++ thread->abort = 0; ++ retval = kthread_create((void (*)(void *))func, data, &thread->proc, ++ RFPROC | RFNOWAIT, 0, "%s", name); ++ if (retval) { ++ DWC_FREE(thread); ++ return NULL; ++ } ++ ++ return thread; ++} ++ ++int DWC_THREAD_STOP(dwc_thread_t *thread) ++{ ++ int retval; ++ ++ thread->abort = 1; ++ retval = tsleep(&thread->abort, 0, "dw3stp", 60 * hz); ++ ++ if (retval == 0) { ++ /* DWC_THREAD_EXIT() will free the thread struct */ ++ return 0; ++ } ++ ++ /* NOTE: We leak the thread struct if thread doesn't die */ ++ ++ if (retval == EWOULDBLOCK) { ++ return -DWC_E_TIMEOUT; ++ } ++ ++ return -DWC_E_UNKNOWN; ++} ++ ++dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread) ++{ ++ return thread->abort; ++} ++ ++void DWC_THREAD_EXIT(dwc_thread_t *thread) ++{ ++ wakeup(&thread->abort); ++ DWC_FREE(thread); ++ kthread_exit(0); ++} ++ ++ ++/* tasklets ++ - Runs in interrupt context (cannot sleep) ++ - Each tasklet runs on a single CPU [ How can we ensure this on FreeBSD? Does it matter? ] ++ - Different tasklets can be running simultaneously on different CPUs [ shouldn't matter ] ++ */ ++struct dwc_tasklet { ++ struct task t; ++ dwc_tasklet_callback_t cb; ++ void *data; ++}; ++ ++static void tasklet_callback(void *data, int pending) // what to do with pending ??? ++{ ++ dwc_tasklet_t *task = (dwc_tasklet_t *)data; ++ ++ task->cb(task->data); ++} ++ ++dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data) ++{ ++ dwc_tasklet_t *task = DWC_ALLOC(sizeof(*task)); ++ ++ if (task) { ++ task->cb = cb; ++ task->data = data; ++ TASK_INIT(&task->t, 0, tasklet_callback, task); ++ } else { ++ DWC_ERROR("Cannot allocate memory for tasklet"); ++ } ++ ++ return task; ++} ++ ++void DWC_TASK_FREE(dwc_tasklet_t *task) ++{ ++ taskqueue_drain(taskqueue_fast, &task->t); // ??? ++ DWC_FREE(task); ++} ++ ++void DWC_TASK_SCHEDULE(dwc_tasklet_t *task) ++{ ++ /* Uses predefined system queue */ ++ taskqueue_enqueue_fast(taskqueue_fast, &task->t); ++} ++ ++ ++/* workqueues ++ - Runs in process context (can sleep) ++ */ ++typedef struct work_container { ++ dwc_work_callback_t cb; ++ void *data; ++ dwc_workq_t *wq; ++ char *name; ++ int hz; ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_ENTRY(work_container) entry; ++#endif ++ struct task task; ++} work_container_t; ++ ++#ifdef DEBUG ++DWC_CIRCLEQ_HEAD(work_container_queue, work_container); ++#endif ++ ++struct dwc_workq { ++ struct taskqueue *taskq; ++ dwc_spinlock_t *lock; ++ dwc_waitq_t *waitq; ++ int pending; ++ ++#ifdef DEBUG ++ struct work_container_queue entries; ++#endif ++}; ++ ++static void do_work(void *data, int pending) // what to do with pending ??? ++{ ++ work_container_t *container = (work_container_t *)data; ++ dwc_workq_t *wq = container->wq; ++ dwc_irqflags_t flags; ++ ++ if (container->hz) { ++ pause("dw3wrk", container->hz); ++ } ++ ++ container->cb(container->data); ++ DWC_DEBUG("Work done: %s, container=%p", container->name, container); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_REMOVE(&wq->entries, container, entry); ++#endif ++ if (container->name) ++ DWC_FREE(container->name); ++ DWC_FREE(container); ++ wq->pending--; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++} ++ ++static int work_done(void *data) ++{ ++ dwc_workq_t *workq = (dwc_workq_t *)data; ++ ++ return workq->pending == 0; ++} ++ ++int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout) ++{ ++ return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout); ++} ++ ++dwc_workq_t *DWC_WORKQ_ALLOC(char *name) ++{ ++ dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq)); ++ ++ if (!wq) { ++ DWC_ERROR("Cannot allocate memory for workqueue"); ++ return NULL; ++ } ++ ++ wq->taskq = taskqueue_create(name, M_NOWAIT, taskqueue_thread_enqueue, &wq->taskq); ++ if (!wq->taskq) { ++ DWC_ERROR("Cannot allocate memory for taskqueue"); ++ goto no_taskq; ++ } ++ ++ wq->pending = 0; ++ ++ wq->lock = DWC_SPINLOCK_ALLOC(); ++ if (!wq->lock) { ++ DWC_ERROR("Cannot allocate memory for spinlock"); ++ goto no_lock; ++ } ++ ++ wq->waitq = DWC_WAITQ_ALLOC(); ++ if (!wq->waitq) { ++ DWC_ERROR("Cannot allocate memory for waitqueue"); ++ goto no_waitq; ++ } ++ ++ taskqueue_start_threads(&wq->taskq, 1, PWAIT, "%s taskq", "dw3tsk"); ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_INIT(&wq->entries); ++#endif ++ return wq; ++ ++ no_waitq: ++ DWC_SPINLOCK_FREE(wq->lock); ++ no_lock: ++ taskqueue_free(wq->taskq); ++ no_taskq: ++ DWC_FREE(wq); ++ ++ return NULL; ++} ++ ++void DWC_WORKQ_FREE(dwc_workq_t *wq) ++{ ++#ifdef DEBUG ++ dwc_irqflags_t flags; ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ ++ if (wq->pending != 0) { ++ struct work_container *container; ++ ++ DWC_ERROR("Destroying work queue with pending work"); ++ ++ DWC_CIRCLEQ_FOREACH(container, &wq->entries, entry) { ++ DWC_ERROR("Work %s still pending", container->name); ++ } ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++#endif ++ DWC_WAITQ_FREE(wq->waitq); ++ DWC_SPINLOCK_FREE(wq->lock); ++ taskqueue_free(wq->taskq); ++ DWC_FREE(wq); ++} ++ ++void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data, ++ char *format, ...) ++{ ++ dwc_irqflags_t flags; ++ work_container_t *container; ++ static char name[128]; ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VSNPRINTF(name, 128, format, args); ++ va_end(args); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ wq->pending++; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++ ++ container = DWC_ALLOC_ATOMIC(sizeof(*container)); ++ if (!container) { ++ DWC_ERROR("Cannot allocate memory for container"); ++ return; ++ } ++ ++ container->name = DWC_STRDUP(name); ++ if (!container->name) { ++ DWC_ERROR("Cannot allocate memory for container->name"); ++ DWC_FREE(container); ++ return; ++ } ++ ++ container->cb = cb; ++ container->data = data; ++ container->wq = wq; ++ container->hz = 0; ++ ++ DWC_DEBUG("Queueing work: %s, container=%p", container->name, container); ++ ++ TASK_INIT(&container->task, 0, do_work, container); ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry); ++#endif ++ taskqueue_enqueue_fast(wq->taskq, &container->task); ++} ++ ++void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb, ++ void *data, uint32_t time, char *format, ...) ++{ ++ dwc_irqflags_t flags; ++ work_container_t *container; ++ static char name[128]; ++ struct timeval tv; ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VSNPRINTF(name, 128, format, args); ++ va_end(args); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ wq->pending++; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++ ++ container = DWC_ALLOC_ATOMIC(sizeof(*container)); ++ if (!container) { ++ DWC_ERROR("Cannot allocate memory for container"); ++ return; ++ } ++ ++ container->name = DWC_STRDUP(name); ++ if (!container->name) { ++ DWC_ERROR("Cannot allocate memory for container->name"); ++ DWC_FREE(container); ++ return; ++ } ++ ++ container->cb = cb; ++ container->data = data; ++ container->wq = wq; ++ ++ tv.tv_sec = time / 1000; ++ tv.tv_usec = (time - tv.tv_sec * 1000) * 1000; ++ container->hz = tvtohz(&tv); ++ ++ DWC_DEBUG("Queueing work: %s, container=%p", container->name, container); ++ ++ TASK_INIT(&container->task, 0, do_work, container); ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry); ++#endif ++ taskqueue_enqueue_fast(wq->taskq, &container->task); ++} ++ ++int DWC_WORKQ_PENDING(dwc_workq_t *wq) ++{ ++ return wq->pending; ++} +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_common_linux.c +@@ -0,0 +1,1421 @@ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/kthread.h> ++ ++#ifdef DWC_CCLIB ++# include "dwc_cc.h" ++#endif ++ ++#ifdef DWC_CRYPTOLIB ++# include "dwc_modpow.h" ++# include "dwc_dh.h" ++# include "dwc_crypto.h" ++#endif ++ ++#ifdef DWC_NOTIFYLIB ++# include "dwc_notifier.h" ++#endif ++ ++/* OS-Level Implementations */ ++ ++/* This is the Linux kernel implementation of the DWC platform library. */ ++#include <linux/moduleparam.h> ++#include <linux/ctype.h> ++#include <linux/crypto.h> ++#include <linux/delay.h> ++#include <linux/device.h> ++#include <linux/dma-mapping.h> ++#include <linux/cdev.h> ++#include <linux/errno.h> ++#include <linux/interrupt.h> ++#include <linux/jiffies.h> ++#include <linux/list.h> ++#include <linux/pci.h> ++#include <linux/random.h> ++#include <linux/scatterlist.h> ++#include <linux/slab.h> ++#include <linux/stat.h> ++#include <linux/string.h> ++#include <linux/timer.h> ++#include <linux/usb.h> ++ ++#include <linux/version.h> ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) ++# include <linux/usb/gadget.h> ++#else ++# include <linux/usb_gadget.h> ++#endif ++ ++#include <asm/io.h> ++#include <asm/page.h> ++#include <asm/uaccess.h> ++#include <asm/unaligned.h> ++ ++#include "dwc_os.h" ++#include "dwc_list.h" ++ ++ ++/* MISC */ ++ ++void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size) ++{ ++ return memset(dest, byte, size); ++} ++ ++void *DWC_MEMCPY(void *dest, void const *src, uint32_t size) ++{ ++ return memcpy(dest, src, size); ++} ++ ++void *DWC_MEMMOVE(void *dest, void *src, uint32_t size) ++{ ++ return memmove(dest, src, size); ++} ++ ++int DWC_MEMCMP(void *m1, void *m2, uint32_t size) ++{ ++ return memcmp(m1, m2, size); ++} ++ ++int DWC_STRNCMP(void *s1, void *s2, uint32_t size) ++{ ++ return strncmp(s1, s2, size); ++} ++ ++int DWC_STRCMP(void *s1, void *s2) ++{ ++ return strcmp(s1, s2); ++} ++ ++int DWC_STRLEN(char const *str) ++{ ++ return strlen(str); ++} ++ ++char *DWC_STRCPY(char *to, char const *from) ++{ ++ return strcpy(to, from); ++} ++ ++char *DWC_STRDUP(char const *str) ++{ ++ int len = DWC_STRLEN(str) + 1; ++ char *new = DWC_ALLOC_ATOMIC(len); ++ ++ if (!new) { ++ return NULL; ++ } ++ ++ DWC_MEMCPY(new, str, len); ++ return new; ++} ++ ++int DWC_ATOI(const char *str, int32_t *value) ++{ ++ char *end = NULL; ++ ++ *value = simple_strtol(str, &end, 0); ++ if (*end == '\0') { ++ return 0; ++ } ++ ++ return -1; ++} ++ ++int DWC_ATOUI(const char *str, uint32_t *value) ++{ ++ char *end = NULL; ++ ++ *value = simple_strtoul(str, &end, 0); ++ if (*end == '\0') { ++ return 0; ++ } ++ ++ return -1; ++} ++ ++ ++#ifdef DWC_UTFLIB ++/* From usbstring.c */ ++ ++int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len) ++{ ++ int count = 0; ++ u8 c; ++ u16 uchar; ++ ++ /* this insists on correct encodings, though not minimal ones. ++ * BUT it currently rejects legit 4-byte UTF-8 code points, ++ * which need surrogate pairs. (Unicode 3.1 can use them.) ++ */ ++ while (len != 0 && (c = (u8) *s++) != 0) { ++ if (unlikely(c & 0x80)) { ++ // 2-byte sequence: ++ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx ++ if ((c & 0xe0) == 0xc0) { ++ uchar = (c & 0x1f) << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ // 3-byte sequence (most CJKV characters): ++ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx ++ } else if ((c & 0xf0) == 0xe0) { ++ uchar = (c & 0x0f) << 12; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ /* no bogus surrogates */ ++ if (0xd800 <= uchar && uchar <= 0xdfff) ++ goto fail; ++ ++ // 4-byte sequence (surrogate pairs, currently rare): ++ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx ++ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx ++ // (uuuuu = wwww + 1) ++ // FIXME accept the surrogate code points (only) ++ } else ++ goto fail; ++ } else ++ uchar = c; ++ put_unaligned (cpu_to_le16 (uchar), cp++); ++ count++; ++ len--; ++ } ++ return count; ++fail: ++ return -1; ++} ++#endif /* DWC_UTFLIB */ ++ ++ ++/* dwc_debug.h */ ++ ++dwc_bool_t DWC_IN_IRQ(void) ++{ ++ return in_irq(); ++} ++ ++dwc_bool_t DWC_IN_BH(void) ++{ ++ return in_softirq(); ++} ++ ++void DWC_VPRINTF(char *format, va_list args) ++{ ++ vprintk(format, args); ++} ++ ++int DWC_VSNPRINTF(char *str, int size, char *format, va_list args) ++{ ++ return vsnprintf(str, size, format, args); ++} ++ ++void DWC_PRINTF(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++int DWC_SPRINTF(char *buffer, char *format, ...) ++{ ++ int retval; ++ va_list args; ++ ++ va_start(args, format); ++ retval = vsprintf(buffer, format, args); ++ va_end(args); ++ return retval; ++} ++ ++int DWC_SNPRINTF(char *buffer, int size, char *format, ...) ++{ ++ int retval; ++ va_list args; ++ ++ va_start(args, format); ++ retval = vsnprintf(buffer, size, format, args); ++ va_end(args); ++ return retval; ++} ++ ++void __DWC_WARN(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_PRINTF(KERN_WARNING); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++void __DWC_ERROR(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_PRINTF(KERN_ERR); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++void DWC_EXCEPTION(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_PRINTF(KERN_ERR); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++ BUG_ON(1); ++} ++ ++#ifdef DEBUG ++void __DWC_DEBUG(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_PRINTF(KERN_DEBUG); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++#endif ++ ++ ++/* dwc_mem.h */ ++ ++#if 0 ++dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, ++ uint32_t align, ++ uint32_t alloc) ++{ ++ struct dma_pool *pool = dma_pool_create("Pool", NULL, ++ size, align, alloc); ++ return (dwc_pool_t *)pool; ++} ++ ++void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool) ++{ ++ dma_pool_destroy((struct dma_pool *)pool); ++} ++ ++void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr) ++{ ++ return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr); ++} ++ ++void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr) ++{ ++ void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr); ++ memset(..); ++} ++ ++void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr) ++{ ++ dma_pool_free(pool, vaddr, daddr); ++} ++#endif ++ ++void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr) ++{ ++#ifdef xxCOSIM /* Only works for 32-bit cosim */ ++ void *buf = dma_alloc_coherent(dma_ctx, (size_t)size, dma_addr, GFP_KERNEL); ++#else ++ void *buf = dma_alloc_coherent(dma_ctx, (size_t)size, dma_addr, GFP_KERNEL | GFP_DMA32); ++#endif ++ if (!buf) { ++ return NULL; ++ } ++ ++ memset(buf, 0, (size_t)size); ++ return buf; ++} ++ ++void *__DWC_DMA_ALLOC_ATOMIC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr) ++{ ++ void *buf = dma_alloc_coherent(NULL, (size_t)size, dma_addr, GFP_ATOMIC); ++ if (!buf) { ++ return NULL; ++ } ++ memset(buf, 0, (size_t)size); ++ return buf; ++} ++ ++void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr) ++{ ++ dma_free_coherent(dma_ctx, size, virt_addr, dma_addr); ++} ++ ++void *__DWC_ALLOC(void *mem_ctx, uint32_t size) ++{ ++ return kzalloc(size, GFP_KERNEL); ++} ++ ++void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size) ++{ ++ return kzalloc(size, GFP_ATOMIC); ++} ++ ++void __DWC_FREE(void *mem_ctx, void *addr) ++{ ++ kfree(addr); ++} ++ ++ ++#ifdef DWC_CRYPTOLIB ++/* dwc_crypto.h */ ++ ++void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length) ++{ ++ get_random_bytes(buffer, length); ++} ++ ++int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out) ++{ ++ struct crypto_blkcipher *tfm; ++ struct blkcipher_desc desc; ++ struct scatterlist sgd; ++ struct scatterlist sgs; ++ ++ tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC); ++ if (tfm == NULL) { ++ printk("failed to load transform for aes CBC\n"); ++ return -1; ++ } ++ ++ crypto_blkcipher_setkey(tfm, key, keylen); ++ crypto_blkcipher_set_iv(tfm, iv, 16); ++ ++ sg_init_one(&sgd, out, messagelen); ++ sg_init_one(&sgs, message, messagelen); ++ ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) { ++ crypto_free_blkcipher(tfm); ++ DWC_ERROR("AES CBC encryption failed"); ++ return -1; ++ } ++ ++ crypto_free_blkcipher(tfm); ++ return 0; ++} ++ ++int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out) ++{ ++ struct crypto_hash *tfm; ++ struct hash_desc desc; ++ struct scatterlist sg; ++ ++ tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC); ++ if (IS_ERR(tfm)) { ++ DWC_ERROR("Failed to load transform for sha256: %ld\n", PTR_ERR(tfm)); ++ return 0; ++ } ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ sg_init_one(&sg, message, len); ++ crypto_hash_digest(&desc, &sg, len, out); ++ crypto_free_hash(tfm); ++ ++ return 1; ++} ++ ++int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, ++ uint8_t *key, uint32_t keylen, uint8_t *out) ++{ ++ struct crypto_hash *tfm; ++ struct hash_desc desc; ++ struct scatterlist sg; ++ ++ tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC); ++ if (IS_ERR(tfm)) { ++ DWC_ERROR("Failed to load transform for hmac(sha256): %ld\n", PTR_ERR(tfm)); ++ return 0; ++ } ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ sg_init_one(&sg, message, messagelen); ++ crypto_hash_setkey(tfm, key, keylen); ++ crypto_hash_digest(&desc, &sg, messagelen, out); ++ crypto_free_hash(tfm); ++ ++ return 1; ++} ++#endif /* DWC_CRYPTOLIB */ ++ ++ ++/* Byte Ordering Conversions */ ++ ++uint32_t DWC_CPU_TO_LE32(uint32_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_CPU_TO_BE32(uint32_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_LE32_TO_CPU(uint32_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_BE32_TO_CPU(uint32_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint16_t DWC_CPU_TO_LE16(uint16_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_CPU_TO_BE16(uint16_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_LE16_TO_CPU(uint16_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_BE16_TO_CPU(uint16_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++ ++/* Registers */ ++ ++uint32_t DWC_READ_REG32(uint32_t volatile *reg) ++{ ++ return readl(reg); ++} ++ ++#if 0 ++uint64_t DWC_READ_REG64(uint64_t volatile *reg) ++{ ++} ++#endif ++ ++void DWC_WRITE_REG32(uint32_t volatile *reg, uint32_t value) ++{ ++ writel(value, reg); ++} ++ ++#if 0 ++void DWC_WRITE_REG64(uint64_t volatile *reg, uint64_t value) ++{ ++} ++#endif ++ ++void DWC_MODIFY_REG32(uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask) ++{ ++ writel((readl(reg) & ~clear_mask) | set_mask, reg); ++} ++ ++#if 0 ++void DWC_MODIFY_REG64(uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask) ++{ ++} ++#endif ++ ++ ++/* Locking */ ++ ++dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void) ++{ ++ spinlock_t *sl = (spinlock_t *)1; ++ ++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) ++ sl = DWC_ALLOC(sizeof(*sl)); ++ if (!sl) { ++ DWC_ERROR("Cannot allocate memory for spinlock\n"); ++ return NULL; ++ } ++ ++ spin_lock_init(sl); ++#endif ++ return (dwc_spinlock_t *)sl; ++} ++ ++void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock) ++{ ++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) ++ DWC_FREE(lock); ++#endif ++} ++ ++void DWC_SPINLOCK(dwc_spinlock_t *lock) ++{ ++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) ++ spin_lock((spinlock_t *)lock); ++#endif ++} ++ ++void DWC_SPINUNLOCK(dwc_spinlock_t *lock) ++{ ++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) ++ spin_unlock((spinlock_t *)lock); ++#endif ++} ++ ++void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags) ++{ ++ dwc_irqflags_t f; ++ ++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) ++ spin_lock_irqsave((spinlock_t *)lock, f); ++#else ++ local_irq_save(f); ++#endif ++ *flags = f; ++} ++ ++void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags) ++{ ++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) ++ spin_unlock_irqrestore((spinlock_t *)lock, flags); ++#else ++ local_irq_restore(flags); ++#endif ++} ++ ++dwc_mutex_t *DWC_MUTEX_ALLOC(void) ++{ ++ struct mutex *m; ++ dwc_mutex_t *mutex = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mutex)); ++ ++ if (!mutex) { ++ DWC_ERROR("Cannot allocate memory for mutex\n"); ++ return NULL; ++ } ++ ++ m = (struct mutex *)mutex; ++ mutex_init(m); ++ return mutex; ++} ++ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) ++#else ++void DWC_MUTEX_FREE(dwc_mutex_t *mutex) ++{ ++ mutex_destroy((struct mutex *)mutex); ++ DWC_FREE(mutex); ++} ++#endif ++ ++void DWC_MUTEX_LOCK(dwc_mutex_t *mutex) ++{ ++ struct mutex *m = (struct mutex *)mutex; ++ mutex_lock(m); ++} ++ ++int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex) ++{ ++ struct mutex *m = (struct mutex *)mutex; ++ return mutex_trylock(m); ++} ++ ++void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex) ++{ ++ struct mutex *m = (struct mutex *)mutex; ++ mutex_unlock(m); ++} ++ ++ ++/* Timing */ ++ ++void DWC_UDELAY(uint32_t usecs) ++{ ++ udelay(usecs); ++} ++ ++void DWC_MDELAY(uint32_t msecs) ++{ ++ mdelay(msecs); ++} ++ ++void DWC_MSLEEP(uint32_t msecs) ++{ ++ msleep(msecs); ++} ++ ++uint32_t DWC_TIME(void) ++{ ++ return jiffies_to_msecs(jiffies); ++} ++ ++ ++/* Timers */ ++ ++struct dwc_timer { ++ struct timer_list *t; ++ char *name; ++ dwc_timer_callback_t cb; ++ void *data; ++ uint8_t scheduled; ++ dwc_spinlock_t *lock; ++}; ++ ++static void timer_callback(unsigned long data) ++{ ++ dwc_timer_t *timer = (dwc_timer_t *)data; ++ dwc_irqflags_t flags; ++ ++ DWC_SPINLOCK_IRQSAVE(timer->lock, &flags); ++ timer->scheduled = 0; ++ DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags); ++ DWC_DEBUGC("Timer %s callback", timer->name); ++ timer->cb(timer->data); ++} ++ ++dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data) ++{ ++ dwc_timer_t *t = DWC_ALLOC(sizeof(*t)); ++ ++ if (!t) { ++ DWC_ERROR("Cannot allocate memory for timer"); ++ return NULL; ++ } ++ ++ t->t = DWC_ALLOC(sizeof(*t->t)); ++ if (!t->t) { ++ DWC_ERROR("Cannot allocate memory for timer->t"); ++ goto no_timer; ++ } ++ ++ t->name = DWC_STRDUP(name); ++ if (!t->name) { ++ DWC_ERROR("Cannot allocate memory for timer->name"); ++ goto no_name; ++ } ++ ++ t->lock = DWC_SPINLOCK_ALLOC(); ++ if (!t->lock) { ++ DWC_ERROR("Cannot allocate memory for lock"); ++ goto no_lock; ++ } ++ ++ t->scheduled = 0; ++ t->t->base = &boot_tvec_bases; ++ t->t->expires = jiffies; ++ setup_timer(t->t, timer_callback, (unsigned long)t); ++ ++ t->cb = cb; ++ t->data = data; ++ ++ return t; ++ ++ no_lock: ++ DWC_FREE(t->name); ++ no_name: ++ DWC_FREE(t->t); ++ no_timer: ++ DWC_FREE(t); ++ return NULL; ++} ++ ++void DWC_TIMER_FREE(dwc_timer_t *timer) ++{ ++ dwc_irqflags_t flags; ++ ++ DWC_SPINLOCK_IRQSAVE(timer->lock, &flags); ++ ++ if (timer->scheduled) { ++ del_timer(timer->t); ++ timer->scheduled = 0; ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags); ++ DWC_SPINLOCK_FREE(timer->lock); ++ DWC_FREE(timer->t); ++ DWC_FREE(timer->name); ++ DWC_FREE(timer); ++} ++ ++void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time) ++{ ++ dwc_irqflags_t flags; ++ ++ DWC_SPINLOCK_IRQSAVE(timer->lock, &flags); ++ ++ if (!timer->scheduled) { ++ timer->scheduled = 1; ++ DWC_DEBUGC("Scheduling timer %s to expire in +%d msec", timer->name, time); ++ timer->t->expires = jiffies + msecs_to_jiffies(time); ++ add_timer(timer->t); ++ } else { ++ DWC_DEBUGC("Modifying timer %s to expire in +%d msec", timer->name, time); ++ mod_timer(timer->t, jiffies + msecs_to_jiffies(time)); ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags); ++} ++ ++void DWC_TIMER_CANCEL(dwc_timer_t *timer) ++{ ++ del_timer(timer->t); ++} ++ ++ ++/* Wait Queues */ ++ ++struct dwc_waitq { ++ wait_queue_head_t queue; ++ int abort; ++}; ++ ++dwc_waitq_t *DWC_WAITQ_ALLOC(void) ++{ ++ dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq)); ++ ++ if (!wq) { ++ DWC_ERROR("Cannot allocate memory for waitqueue\n"); ++ return NULL; ++ } ++ ++ init_waitqueue_head(&wq->queue); ++ wq->abort = 0; ++ return wq; ++} ++ ++void DWC_WAITQ_FREE(dwc_waitq_t *wq) ++{ ++ DWC_FREE(wq); ++} ++ ++int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data) ++{ ++ int result = wait_event_interruptible(wq->queue, ++ cond(data) || wq->abort); ++ if (result == -ERESTARTSYS) { ++ wq->abort = 0; ++ return -DWC_E_RESTART; ++ } ++ ++ if (wq->abort == 1) { ++ wq->abort = 0; ++ return -DWC_E_ABORT; ++ } ++ ++ wq->abort = 0; ++ ++ if (result == 0) { ++ return 0; ++ } ++ ++ return -DWC_E_UNKNOWN; ++} ++ ++int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, ++ void *data, int32_t msecs) ++{ ++ int32_t tmsecs; ++ int result = wait_event_interruptible_timeout(wq->queue, ++ cond(data) || wq->abort, ++ msecs_to_jiffies(msecs)); ++ if (result == -ERESTARTSYS) { ++ wq->abort = 0; ++ return -DWC_E_RESTART; ++ } ++ ++ if (wq->abort == 1) { ++ wq->abort = 0; ++ return -DWC_E_ABORT; ++ } ++ ++ wq->abort = 0; ++ ++ if (result > 0) { ++ tmsecs = jiffies_to_msecs(result); ++ if (!tmsecs) { ++ return 1; ++ } ++ ++ return tmsecs; ++ } ++ ++ if (result == 0) { ++ return -DWC_E_TIMEOUT; ++ } ++ ++ return -DWC_E_UNKNOWN; ++} ++ ++void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq) ++{ ++ wq->abort = 0; ++ wake_up_interruptible(&wq->queue); ++} ++ ++void DWC_WAITQ_ABORT(dwc_waitq_t *wq) ++{ ++ wq->abort = 1; ++ wake_up_interruptible(&wq->queue); ++} ++ ++ ++/* Threading */ ++ ++dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data) ++{ ++ struct task_struct *thread = kthread_run(func, data, name); ++ ++ if (thread == ERR_PTR(-ENOMEM)) { ++ return NULL; ++ } ++ ++ return (dwc_thread_t *)thread; ++} ++ ++int DWC_THREAD_STOP(dwc_thread_t *thread) ++{ ++ return kthread_stop((struct task_struct *)thread); ++} ++ ++dwc_bool_t DWC_THREAD_SHOULD_STOP(void) ++{ ++ return kthread_should_stop(); ++} ++ ++ ++/* tasklets ++ - run in interrupt context (cannot sleep) ++ - each tasklet runs on a single CPU ++ - different tasklets can be running simultaneously on different CPUs ++ */ ++struct dwc_tasklet { ++ struct tasklet_struct t; ++ dwc_tasklet_callback_t cb; ++ void *data; ++}; ++ ++static void tasklet_callback(unsigned long data) ++{ ++ dwc_tasklet_t *t = (dwc_tasklet_t *)data; ++ t->cb(t->data); ++} ++ ++dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data) ++{ ++ dwc_tasklet_t *t = DWC_ALLOC(sizeof(*t)); ++ ++ if (t) { ++ t->cb = cb; ++ t->data = data; ++ tasklet_init(&t->t, tasklet_callback, (unsigned long)t); ++ } else { ++ DWC_ERROR("Cannot allocate memory for tasklet\n"); ++ } ++ ++ return t; ++} ++ ++void DWC_TASK_FREE(dwc_tasklet_t *task) ++{ ++ DWC_FREE(task); ++} ++ ++void DWC_TASK_SCHEDULE(dwc_tasklet_t *task) ++{ ++ tasklet_schedule(&task->t); ++} ++ ++ ++/* workqueues ++ - run in process context (can sleep) ++ */ ++typedef struct work_container { ++ dwc_work_callback_t cb; ++ void *data; ++ dwc_workq_t *wq; ++ char *name; ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_ENTRY(work_container) entry; ++#endif ++ struct delayed_work work; ++} work_container_t; ++ ++#ifdef DEBUG ++DWC_CIRCLEQ_HEAD(work_container_queue, work_container); ++#endif ++ ++struct dwc_workq { ++ struct workqueue_struct *wq; ++ dwc_spinlock_t *lock; ++ dwc_waitq_t *waitq; ++ int pending; ++ ++#ifdef DEBUG ++ struct work_container_queue entries; ++#endif ++}; ++ ++static void do_work(struct work_struct *work) ++{ ++ dwc_irqflags_t flags; ++ struct delayed_work *dw = container_of(work, struct delayed_work, work); ++ work_container_t *container = container_of(dw, struct work_container, work); ++ dwc_workq_t *wq = container->wq; ++ ++ container->cb(container->data); ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_REMOVE(&wq->entries, container, entry); ++#endif ++ DWC_DEBUGC("Work done: %s, container=%p", container->name, container); ++ if (container->name) { ++ DWC_FREE(container->name); ++ } ++ DWC_FREE(container); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ wq->pending--; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++} ++ ++static int work_done(void *data) ++{ ++ dwc_workq_t *workq = (dwc_workq_t *)data; ++ return workq->pending == 0; ++} ++ ++int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout) ++{ ++ return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout); ++} ++ ++dwc_workq_t *DWC_WORKQ_ALLOC(char *name) ++{ ++ dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq)); ++ ++ if (!wq) { ++ return NULL; ++ } ++ ++ wq->wq = create_singlethread_workqueue(name); ++ if (!wq->wq) { ++ goto no_wq; ++ } ++ ++ wq->pending = 0; ++ ++ wq->lock = DWC_SPINLOCK_ALLOC(); ++ if (!wq->lock) { ++ goto no_lock; ++ } ++ ++ wq->waitq = DWC_WAITQ_ALLOC(); ++ if (!wq->waitq) { ++ goto no_waitq; ++ } ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_INIT(&wq->entries); ++#endif ++ return wq; ++ ++ no_waitq: ++ DWC_SPINLOCK_FREE(wq->lock); ++ no_lock: ++ destroy_workqueue(wq->wq); ++ no_wq: ++ DWC_FREE(wq); ++ ++ return NULL; ++} ++ ++void DWC_WORKQ_FREE(dwc_workq_t *wq) ++{ ++#ifdef DEBUG ++ if (wq->pending != 0) { ++ struct work_container *wc; ++ DWC_ERROR("Destroying work queue with pending work"); ++ DWC_CIRCLEQ_FOREACH(wc, &wq->entries, entry) { ++ DWC_ERROR("Work %s still pending", wc->name); ++ } ++ } ++#endif ++ destroy_workqueue(wq->wq); ++ DWC_SPINLOCK_FREE(wq->lock); ++ DWC_WAITQ_FREE(wq->waitq); ++ DWC_FREE(wq); ++} ++ ++void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data, ++ char *format, ...) ++{ ++ dwc_irqflags_t flags; ++ work_container_t *container; ++ static char name[128]; ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VSNPRINTF(name, 128, format, args); ++ va_end(args); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ wq->pending++; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++ ++ container = DWC_ALLOC_ATOMIC(sizeof(*container)); ++ if (!container) { ++ DWC_ERROR("Cannot allocate memory for container\n"); ++ return; ++ } ++ ++ container->name = DWC_STRDUP(name); ++ if (!container->name) { ++ DWC_ERROR("Cannot allocate memory for container->name\n"); ++ DWC_FREE(container); ++ return; ++ } ++ ++ container->cb = cb; ++ container->data = data; ++ container->wq = wq; ++ DWC_DEBUGC("Queueing work: %s, container=%p", container->name, container); ++ INIT_WORK(&container->work.work, do_work); ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry); ++#endif ++ queue_work(wq->wq, &container->work.work); ++} ++ ++void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb, ++ void *data, uint32_t time, char *format, ...) ++{ ++ dwc_irqflags_t flags; ++ work_container_t *container; ++ static char name[128]; ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VSNPRINTF(name, 128, format, args); ++ va_end(args); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ wq->pending++; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++ ++ container = DWC_ALLOC_ATOMIC(sizeof(*container)); ++ if (!container) { ++ DWC_ERROR("Cannot allocate memory for container\n"); ++ return; ++ } ++ ++ container->name = DWC_STRDUP(name); ++ if (!container->name) { ++ DWC_ERROR("Cannot allocate memory for container->name\n"); ++ DWC_FREE(container); ++ return; ++ } ++ ++ container->cb = cb; ++ container->data = data; ++ container->wq = wq; ++ DWC_DEBUGC("Queueing work: %s, container=%p", container->name, container); ++ INIT_DELAYED_WORK(&container->work, do_work); ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry); ++#endif ++ queue_delayed_work(wq->wq, &container->work, msecs_to_jiffies(time)); ++} ++ ++int DWC_WORKQ_PENDING(dwc_workq_t *wq) ++{ ++ return wq->pending; ++} ++ ++ ++#ifdef DWC_LIBMODULE ++ ++#ifdef DWC_CCLIB ++/* CC */ ++EXPORT_SYMBOL(dwc_cc_if_alloc); ++EXPORT_SYMBOL(dwc_cc_if_free); ++EXPORT_SYMBOL(dwc_cc_clear); ++EXPORT_SYMBOL(dwc_cc_add); ++EXPORT_SYMBOL(dwc_cc_remove); ++EXPORT_SYMBOL(dwc_cc_change); ++EXPORT_SYMBOL(dwc_cc_data_for_save); ++EXPORT_SYMBOL(dwc_cc_restore_from_data); ++EXPORT_SYMBOL(dwc_cc_match_chid); ++EXPORT_SYMBOL(dwc_cc_match_cdid); ++EXPORT_SYMBOL(dwc_cc_ck); ++EXPORT_SYMBOL(dwc_cc_chid); ++EXPORT_SYMBOL(dwc_cc_cdid); ++EXPORT_SYMBOL(dwc_cc_name); ++#endif /* DWC_CCLIB */ ++ ++#ifdef DWC_CRYPTOLIB ++# ifndef CONFIG_MACH_IPMATE ++/* Modpow */ ++EXPORT_SYMBOL(dwc_modpow); ++ ++/* DH */ ++EXPORT_SYMBOL(dwc_dh_modpow); ++EXPORT_SYMBOL(dwc_dh_derive_keys); ++EXPORT_SYMBOL(dwc_dh_pk); ++# endif /* CONFIG_MACH_IPMATE */ ++ ++/* Crypto */ ++EXPORT_SYMBOL(dwc_wusb_aes_encrypt); ++EXPORT_SYMBOL(dwc_wusb_cmf); ++EXPORT_SYMBOL(dwc_wusb_prf); ++EXPORT_SYMBOL(dwc_wusb_fill_ccm_nonce); ++EXPORT_SYMBOL(dwc_wusb_gen_nonce); ++EXPORT_SYMBOL(dwc_wusb_gen_key); ++EXPORT_SYMBOL(dwc_wusb_gen_mic); ++#endif /* DWC_CRYPTOLIB */ ++ ++/* Notification */ ++#ifdef DWC_NOTIFYLIB ++EXPORT_SYMBOL(dwc_alloc_notification_manager); ++EXPORT_SYMBOL(dwc_free_notification_manager); ++EXPORT_SYMBOL(dwc_register_notifier); ++EXPORT_SYMBOL(dwc_unregister_notifier); ++EXPORT_SYMBOL(dwc_add_observer); ++EXPORT_SYMBOL(dwc_remove_observer); ++EXPORT_SYMBOL(dwc_notify); ++#endif ++ ++/* Memory Debugging Routines */ ++#ifdef DWC_DEBUG_MEMORY ++EXPORT_SYMBOL(dwc_alloc_debug); ++EXPORT_SYMBOL(dwc_alloc_atomic_debug); ++EXPORT_SYMBOL(dwc_free_debug); ++EXPORT_SYMBOL(dwc_dma_alloc_debug); ++EXPORT_SYMBOL(dwc_dma_free_debug); ++#endif ++ ++EXPORT_SYMBOL(DWC_MEMSET); ++EXPORT_SYMBOL(DWC_MEMCPY); ++EXPORT_SYMBOL(DWC_MEMMOVE); ++EXPORT_SYMBOL(DWC_MEMCMP); ++EXPORT_SYMBOL(DWC_STRNCMP); ++EXPORT_SYMBOL(DWC_STRCMP); ++EXPORT_SYMBOL(DWC_STRLEN); ++EXPORT_SYMBOL(DWC_STRCPY); ++EXPORT_SYMBOL(DWC_STRDUP); ++EXPORT_SYMBOL(DWC_ATOI); ++EXPORT_SYMBOL(DWC_ATOUI); ++ ++#ifdef DWC_UTFLIB ++EXPORT_SYMBOL(DWC_UTF8_TO_UTF16LE); ++#endif /* DWC_UTFLIB */ ++ ++EXPORT_SYMBOL(DWC_IN_IRQ); ++EXPORT_SYMBOL(DWC_IN_BH); ++EXPORT_SYMBOL(DWC_VPRINTF); ++EXPORT_SYMBOL(DWC_VSNPRINTF); ++EXPORT_SYMBOL(DWC_PRINTF); ++EXPORT_SYMBOL(DWC_SPRINTF); ++EXPORT_SYMBOL(DWC_SNPRINTF); ++EXPORT_SYMBOL(__DWC_WARN); ++EXPORT_SYMBOL(__DWC_ERROR); ++EXPORT_SYMBOL(DWC_EXCEPTION); ++ ++#ifdef DEBUG ++EXPORT_SYMBOL(__DWC_DEBUG); ++#endif ++ ++EXPORT_SYMBOL(__DWC_DMA_ALLOC); ++EXPORT_SYMBOL(__DWC_DMA_ALLOC_ATOMIC); ++EXPORT_SYMBOL(__DWC_DMA_FREE); ++EXPORT_SYMBOL(__DWC_ALLOC); ++EXPORT_SYMBOL(__DWC_ALLOC_ATOMIC); ++EXPORT_SYMBOL(__DWC_FREE); ++ ++#ifdef DWC_CRYPTOLIB ++EXPORT_SYMBOL(DWC_RANDOM_BYTES); ++EXPORT_SYMBOL(DWC_AES_CBC); ++EXPORT_SYMBOL(DWC_SHA256); ++EXPORT_SYMBOL(DWC_HMAC_SHA256); ++#endif ++ ++EXPORT_SYMBOL(DWC_CPU_TO_LE32); ++EXPORT_SYMBOL(DWC_CPU_TO_BE32); ++EXPORT_SYMBOL(DWC_LE32_TO_CPU); ++EXPORT_SYMBOL(DWC_BE32_TO_CPU); ++EXPORT_SYMBOL(DWC_CPU_TO_LE16); ++EXPORT_SYMBOL(DWC_CPU_TO_BE16); ++EXPORT_SYMBOL(DWC_LE16_TO_CPU); ++EXPORT_SYMBOL(DWC_BE16_TO_CPU); ++EXPORT_SYMBOL(DWC_READ_REG32); ++EXPORT_SYMBOL(DWC_WRITE_REG32); ++EXPORT_SYMBOL(DWC_MODIFY_REG32); ++ ++#if 0 ++EXPORT_SYMBOL(DWC_READ_REG64); ++EXPORT_SYMBOL(DWC_WRITE_REG64); ++EXPORT_SYMBOL(DWC_MODIFY_REG64); ++#endif ++ ++EXPORT_SYMBOL(DWC_SPINLOCK_ALLOC); ++EXPORT_SYMBOL(DWC_SPINLOCK_FREE); ++EXPORT_SYMBOL(DWC_SPINLOCK); ++EXPORT_SYMBOL(DWC_SPINUNLOCK); ++EXPORT_SYMBOL(DWC_SPINLOCK_IRQSAVE); ++EXPORT_SYMBOL(DWC_SPINUNLOCK_IRQRESTORE); ++EXPORT_SYMBOL(DWC_MUTEX_ALLOC); ++ ++#if (!defined(DWC_LINUX) || !defined(CONFIG_DEBUG_MUTEXES)) ++EXPORT_SYMBOL(DWC_MUTEX_FREE); ++#endif ++ ++EXPORT_SYMBOL(DWC_MUTEX_LOCK); ++EXPORT_SYMBOL(DWC_MUTEX_TRYLOCK); ++EXPORT_SYMBOL(DWC_MUTEX_UNLOCK); ++EXPORT_SYMBOL(DWC_UDELAY); ++EXPORT_SYMBOL(DWC_MDELAY); ++EXPORT_SYMBOL(DWC_MSLEEP); ++EXPORT_SYMBOL(DWC_TIME); ++EXPORT_SYMBOL(DWC_TIMER_ALLOC); ++EXPORT_SYMBOL(DWC_TIMER_FREE); ++EXPORT_SYMBOL(DWC_TIMER_SCHEDULE); ++EXPORT_SYMBOL(DWC_TIMER_CANCEL); ++EXPORT_SYMBOL(DWC_WAITQ_ALLOC); ++EXPORT_SYMBOL(DWC_WAITQ_FREE); ++EXPORT_SYMBOL(DWC_WAITQ_WAIT); ++EXPORT_SYMBOL(DWC_WAITQ_WAIT_TIMEOUT); ++EXPORT_SYMBOL(DWC_WAITQ_TRIGGER); ++EXPORT_SYMBOL(DWC_WAITQ_ABORT); ++EXPORT_SYMBOL(DWC_THREAD_RUN); ++EXPORT_SYMBOL(DWC_THREAD_STOP); ++EXPORT_SYMBOL(DWC_THREAD_SHOULD_STOP); ++EXPORT_SYMBOL(DWC_TASK_ALLOC); ++EXPORT_SYMBOL(DWC_TASK_FREE); ++EXPORT_SYMBOL(DWC_TASK_SCHEDULE); ++EXPORT_SYMBOL(DWC_WORKQ_WAIT_WORK_DONE); ++EXPORT_SYMBOL(DWC_WORKQ_ALLOC); ++EXPORT_SYMBOL(DWC_WORKQ_FREE); ++EXPORT_SYMBOL(DWC_WORKQ_SCHEDULE); ++EXPORT_SYMBOL(DWC_WORKQ_SCHEDULE_DELAYED); ++EXPORT_SYMBOL(DWC_WORKQ_PENDING); ++ ++static int dwc_common_port_init_module(void) ++{ ++ int result = 0; ++ ++ printk(KERN_DEBUG "Module dwc_common_port init\n" ); ++ ++#ifdef DWC_DEBUG_MEMORY ++ result = dwc_memory_debug_start(NULL); ++ if (result) { ++ printk(KERN_ERR ++ "dwc_memory_debug_start() failed with error %d\n", ++ result); ++ return result; ++ } ++#endif ++ ++#ifdef DWC_NOTIFYLIB ++ result = dwc_alloc_notification_manager(NULL, NULL); ++ if (result) { ++ printk(KERN_ERR ++ "dwc_alloc_notification_manager() failed with error %d\n", ++ result); ++ return result; ++ } ++#endif ++ return result; ++} ++ ++static void dwc_common_port_exit_module(void) ++{ ++ printk(KERN_DEBUG "Module dwc_common_port exit\n" ); ++ ++#ifdef DWC_NOTIFYLIB ++ dwc_free_notification_manager(); ++#endif ++ ++#ifdef DWC_DEBUG_MEMORY ++ dwc_memory_debug_stop(); ++#endif ++} ++ ++module_init(dwc_common_port_init_module); ++module_exit(dwc_common_port_exit_module); ++ ++MODULE_DESCRIPTION("DWC Common Library - Portable version"); ++MODULE_AUTHOR("Synopsys Inc."); ++MODULE_LICENSE ("GPL"); ++ ++#endif /* DWC_LIBMODULE */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_common_nbsd.c +@@ -0,0 +1,1275 @@ ++#include "dwc_os.h" ++#include "dwc_list.h" ++ ++#ifdef DWC_CCLIB ++# include "dwc_cc.h" ++#endif ++ ++#ifdef DWC_CRYPTOLIB ++# include "dwc_modpow.h" ++# include "dwc_dh.h" ++# include "dwc_crypto.h" ++#endif ++ ++#ifdef DWC_NOTIFYLIB ++# include "dwc_notifier.h" ++#endif ++ ++/* OS-Level Implementations */ ++ ++/* This is the NetBSD 4.0.1 kernel implementation of the DWC platform library. */ ++ ++ ++/* MISC */ ++ ++void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size) ++{ ++ return memset(dest, byte, size); ++} ++ ++void *DWC_MEMCPY(void *dest, void const *src, uint32_t size) ++{ ++ return memcpy(dest, src, size); ++} ++ ++void *DWC_MEMMOVE(void *dest, void *src, uint32_t size) ++{ ++ bcopy(src, dest, size); ++ return dest; ++} ++ ++int DWC_MEMCMP(void *m1, void *m2, uint32_t size) ++{ ++ return memcmp(m1, m2, size); ++} ++ ++int DWC_STRNCMP(void *s1, void *s2, uint32_t size) ++{ ++ return strncmp(s1, s2, size); ++} ++ ++int DWC_STRCMP(void *s1, void *s2) ++{ ++ return strcmp(s1, s2); ++} ++ ++int DWC_STRLEN(char const *str) ++{ ++ return strlen(str); ++} ++ ++char *DWC_STRCPY(char *to, char const *from) ++{ ++ return strcpy(to, from); ++} ++ ++char *DWC_STRDUP(char const *str) ++{ ++ int len = DWC_STRLEN(str) + 1; ++ char *new = DWC_ALLOC_ATOMIC(len); ++ ++ if (!new) { ++ return NULL; ++ } ++ ++ DWC_MEMCPY(new, str, len); ++ return new; ++} ++ ++int DWC_ATOI(char *str, int32_t *value) ++{ ++ char *end = NULL; ++ ++ /* NetBSD doesn't have 'strtol' in the kernel, but 'strtoul' ++ * should be equivalent on 2's complement machines ++ */ ++ *value = strtoul(str, &end, 0); ++ if (*end == '\0') { ++ return 0; ++ } ++ ++ return -1; ++} ++ ++int DWC_ATOUI(char *str, uint32_t *value) ++{ ++ char *end = NULL; ++ ++ *value = strtoul(str, &end, 0); ++ if (*end == '\0') { ++ return 0; ++ } ++ ++ return -1; ++} ++ ++ ++#ifdef DWC_UTFLIB ++/* From usbstring.c */ ++ ++int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len) ++{ ++ int count = 0; ++ u8 c; ++ u16 uchar; ++ ++ /* this insists on correct encodings, though not minimal ones. ++ * BUT it currently rejects legit 4-byte UTF-8 code points, ++ * which need surrogate pairs. (Unicode 3.1 can use them.) ++ */ ++ while (len != 0 && (c = (u8) *s++) != 0) { ++ if (unlikely(c & 0x80)) { ++ // 2-byte sequence: ++ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx ++ if ((c & 0xe0) == 0xc0) { ++ uchar = (c & 0x1f) << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ // 3-byte sequence (most CJKV characters): ++ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx ++ } else if ((c & 0xf0) == 0xe0) { ++ uchar = (c & 0x0f) << 12; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ /* no bogus surrogates */ ++ if (0xd800 <= uchar && uchar <= 0xdfff) ++ goto fail; ++ ++ // 4-byte sequence (surrogate pairs, currently rare): ++ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx ++ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx ++ // (uuuuu = wwww + 1) ++ // FIXME accept the surrogate code points (only) ++ } else ++ goto fail; ++ } else ++ uchar = c; ++ put_unaligned (cpu_to_le16 (uchar), cp++); ++ count++; ++ len--; ++ } ++ return count; ++fail: ++ return -1; ++} ++ ++#endif /* DWC_UTFLIB */ ++ ++ ++/* dwc_debug.h */ ++ ++dwc_bool_t DWC_IN_IRQ(void) ++{ ++// return in_irq(); ++ return 0; ++} ++ ++dwc_bool_t DWC_IN_BH(void) ++{ ++// return in_softirq(); ++ return 0; ++} ++ ++void DWC_VPRINTF(char *format, va_list args) ++{ ++ vprintf(format, args); ++} ++ ++int DWC_VSNPRINTF(char *str, int size, char *format, va_list args) ++{ ++ return vsnprintf(str, size, format, args); ++} ++ ++void DWC_PRINTF(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++int DWC_SPRINTF(char *buffer, char *format, ...) ++{ ++ int retval; ++ va_list args; ++ ++ va_start(args, format); ++ retval = vsprintf(buffer, format, args); ++ va_end(args); ++ return retval; ++} ++ ++int DWC_SNPRINTF(char *buffer, int size, char *format, ...) ++{ ++ int retval; ++ va_list args; ++ ++ va_start(args, format); ++ retval = vsnprintf(buffer, size, format, args); ++ va_end(args); ++ return retval; ++} ++ ++void __DWC_WARN(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++void __DWC_ERROR(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++void DWC_EXCEPTION(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++// BUG_ON(1); ??? ++} ++ ++#ifdef DEBUG ++void __DWC_DEBUG(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++#endif ++ ++ ++/* dwc_mem.h */ ++ ++#if 0 ++dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, ++ uint32_t align, ++ uint32_t alloc) ++{ ++ struct dma_pool *pool = dma_pool_create("Pool", NULL, ++ size, align, alloc); ++ return (dwc_pool_t *)pool; ++} ++ ++void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool) ++{ ++ dma_pool_destroy((struct dma_pool *)pool); ++} ++ ++void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr) ++{ ++// return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr); ++ return dma_pool_alloc((struct dma_pool *)pool, M_WAITOK, dma_addr); ++} ++ ++void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr) ++{ ++ void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr); ++ memset(..); ++} ++ ++void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr) ++{ ++ dma_pool_free(pool, vaddr, daddr); ++} ++#endif ++ ++void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr) ++{ ++ dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx; ++ int error; ++ ++ error = bus_dmamem_alloc(dma->dma_tag, size, 1, size, dma->segs, ++ sizeof(dma->segs) / sizeof(dma->segs[0]), ++ &dma->nsegs, BUS_DMA_NOWAIT); ++ if (error) { ++ printf("%s: bus_dmamem_alloc(%ju) failed: %d\n", __func__, ++ (uintmax_t)size, error); ++ goto fail_0; ++ } ++ ++ error = bus_dmamem_map(dma->dma_tag, dma->segs, dma->nsegs, size, ++ (caddr_t *)&dma->dma_vaddr, ++ BUS_DMA_NOWAIT | BUS_DMA_COHERENT); ++ if (error) { ++ printf("%s: bus_dmamem_map failed: %d\n", __func__, error); ++ goto fail_1; ++ } ++ ++ error = bus_dmamap_create(dma->dma_tag, size, 1, size, 0, ++ BUS_DMA_NOWAIT, &dma->dma_map); ++ if (error) { ++ printf("%s: bus_dmamap_create failed: %d\n", __func__, error); ++ goto fail_2; ++ } ++ ++ error = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr, ++ size, NULL, BUS_DMA_NOWAIT); ++ if (error) { ++ printf("%s: bus_dmamap_load failed: %d\n", __func__, error); ++ goto fail_3; ++ } ++ ++ dma->dma_paddr = (bus_addr_t)dma->segs[0].ds_addr; ++ *dma_addr = dma->dma_paddr; ++ return dma->dma_vaddr; ++ ++fail_3: ++ bus_dmamap_destroy(dma->dma_tag, dma->dma_map); ++fail_2: ++ bus_dmamem_unmap(dma->dma_tag, dma->dma_vaddr, size); ++fail_1: ++ bus_dmamem_free(dma->dma_tag, dma->segs, dma->nsegs); ++fail_0: ++ dma->dma_map = NULL; ++ dma->dma_vaddr = NULL; ++ dma->nsegs = 0; ++ ++ return NULL; ++} ++ ++void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr) ++{ ++ dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx; ++ ++ if (dma->dma_map != NULL) { ++ bus_dmamap_sync(dma->dma_tag, dma->dma_map, 0, size, ++ BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); ++ bus_dmamap_unload(dma->dma_tag, dma->dma_map); ++ bus_dmamap_destroy(dma->dma_tag, dma->dma_map); ++ bus_dmamem_unmap(dma->dma_tag, dma->dma_vaddr, size); ++ bus_dmamem_free(dma->dma_tag, dma->segs, dma->nsegs); ++ dma->dma_paddr = 0; ++ dma->dma_map = NULL; ++ dma->dma_vaddr = NULL; ++ dma->nsegs = 0; ++ } ++} ++ ++void *__DWC_ALLOC(void *mem_ctx, uint32_t size) ++{ ++ return malloc(size, M_DEVBUF, M_WAITOK | M_ZERO); ++} ++ ++void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size) ++{ ++ return malloc(size, M_DEVBUF, M_NOWAIT | M_ZERO); ++} ++ ++void __DWC_FREE(void *mem_ctx, void *addr) ++{ ++ free(addr, M_DEVBUF); ++} ++ ++ ++#ifdef DWC_CRYPTOLIB ++/* dwc_crypto.h */ ++ ++void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length) ++{ ++ get_random_bytes(buffer, length); ++} ++ ++int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out) ++{ ++ struct crypto_blkcipher *tfm; ++ struct blkcipher_desc desc; ++ struct scatterlist sgd; ++ struct scatterlist sgs; ++ ++ tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC); ++ if (tfm == NULL) { ++ printk("failed to load transform for aes CBC\n"); ++ return -1; ++ } ++ ++ crypto_blkcipher_setkey(tfm, key, keylen); ++ crypto_blkcipher_set_iv(tfm, iv, 16); ++ ++ sg_init_one(&sgd, out, messagelen); ++ sg_init_one(&sgs, message, messagelen); ++ ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) { ++ crypto_free_blkcipher(tfm); ++ DWC_ERROR("AES CBC encryption failed"); ++ return -1; ++ } ++ ++ crypto_free_blkcipher(tfm); ++ return 0; ++} ++ ++int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out) ++{ ++ struct crypto_hash *tfm; ++ struct hash_desc desc; ++ struct scatterlist sg; ++ ++ tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC); ++ if (IS_ERR(tfm)) { ++ DWC_ERROR("Failed to load transform for sha256: %ld", PTR_ERR(tfm)); ++ return 0; ++ } ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ sg_init_one(&sg, message, len); ++ crypto_hash_digest(&desc, &sg, len, out); ++ crypto_free_hash(tfm); ++ ++ return 1; ++} ++ ++int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, ++ uint8_t *key, uint32_t keylen, uint8_t *out) ++{ ++ struct crypto_hash *tfm; ++ struct hash_desc desc; ++ struct scatterlist sg; ++ ++ tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC); ++ if (IS_ERR(tfm)) { ++ DWC_ERROR("Failed to load transform for hmac(sha256): %ld", PTR_ERR(tfm)); ++ return 0; ++ } ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ sg_init_one(&sg, message, messagelen); ++ crypto_hash_setkey(tfm, key, keylen); ++ crypto_hash_digest(&desc, &sg, messagelen, out); ++ crypto_free_hash(tfm); ++ ++ return 1; ++} ++ ++#endif /* DWC_CRYPTOLIB */ ++ ++ ++/* Byte Ordering Conversions */ ++ ++uint32_t DWC_CPU_TO_LE32(uint32_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_CPU_TO_BE32(uint32_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_LE32_TO_CPU(uint32_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_BE32_TO_CPU(uint32_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint16_t DWC_CPU_TO_LE16(uint16_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_CPU_TO_BE16(uint16_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_LE16_TO_CPU(uint16_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_BE16_TO_CPU(uint16_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++ ++/* Registers */ ++ ++uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ return bus_space_read_4(io->iot, io->ioh, ior); ++} ++ ++#if 0 ++uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ return bus_space_read_8(io->iot, io->ioh, ior); ++} ++#endif ++ ++void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ bus_space_write_4(io->iot, io->ioh, ior, value); ++} ++ ++#if 0 ++void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ bus_space_write_8(io->iot, io->ioh, ior, value); ++} ++#endif ++ ++void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask, ++ uint32_t set_mask) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ bus_space_write_4(io->iot, io->ioh, ior, ++ (bus_space_read_4(io->iot, io->ioh, ior) & ++ ~clear_mask) | set_mask); ++} ++ ++#if 0 ++void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask, ++ uint64_t set_mask) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ bus_space_write_8(io->iot, io->ioh, ior, ++ (bus_space_read_8(io->iot, io->ioh, ior) & ++ ~clear_mask) | set_mask); ++} ++#endif ++ ++ ++/* Locking */ ++ ++dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void) ++{ ++ struct simplelock *sl = DWC_ALLOC(sizeof(*sl)); ++ ++ if (!sl) { ++ DWC_ERROR("Cannot allocate memory for spinlock"); ++ return NULL; ++ } ++ ++ simple_lock_init(sl); ++ return (dwc_spinlock_t *)sl; ++} ++ ++void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock) ++{ ++ struct simplelock *sl = (struct simplelock *)lock; ++ ++ DWC_FREE(sl); ++} ++ ++void DWC_SPINLOCK(dwc_spinlock_t *lock) ++{ ++ simple_lock((struct simplelock *)lock); ++} ++ ++void DWC_SPINUNLOCK(dwc_spinlock_t *lock) ++{ ++ simple_unlock((struct simplelock *)lock); ++} ++ ++void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags) ++{ ++ simple_lock((struct simplelock *)lock); ++ *flags = splbio(); ++} ++ ++void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags) ++{ ++ splx(flags); ++ simple_unlock((struct simplelock *)lock); ++} ++ ++dwc_mutex_t *DWC_MUTEX_ALLOC(void) ++{ ++ dwc_mutex_t *mutex = DWC_ALLOC(sizeof(struct lock)); ++ ++ if (!mutex) { ++ DWC_ERROR("Cannot allocate memory for mutex"); ++ return NULL; ++ } ++ ++ lockinit((struct lock *)mutex, 0, "dw3mtx", 0, 0); ++ return mutex; ++} ++ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) ++#else ++void DWC_MUTEX_FREE(dwc_mutex_t *mutex) ++{ ++ DWC_FREE(mutex); ++} ++#endif ++ ++void DWC_MUTEX_LOCK(dwc_mutex_t *mutex) ++{ ++ lockmgr((struct lock *)mutex, LK_EXCLUSIVE, NULL); ++} ++ ++int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex) ++{ ++ int status; ++ ++ status = lockmgr((struct lock *)mutex, LK_EXCLUSIVE | LK_NOWAIT, NULL); ++ return status == 0; ++} ++ ++void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex) ++{ ++ lockmgr((struct lock *)mutex, LK_RELEASE, NULL); ++} ++ ++ ++/* Timing */ ++ ++void DWC_UDELAY(uint32_t usecs) ++{ ++ DELAY(usecs); ++} ++ ++void DWC_MDELAY(uint32_t msecs) ++{ ++ do { ++ DELAY(1000); ++ } while (--msecs); ++} ++ ++void DWC_MSLEEP(uint32_t msecs) ++{ ++ struct timeval tv; ++ ++ tv.tv_sec = msecs / 1000; ++ tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000; ++ tsleep(&tv, 0, "dw3slp", tvtohz(&tv)); ++} ++ ++uint32_t DWC_TIME(void) ++{ ++ struct timeval tv; ++ ++ microuptime(&tv); // or getmicrouptime? (less precise, but faster) ++ return tv.tv_sec * 1000 + tv.tv_usec / 1000; ++} ++ ++ ++/* Timers */ ++ ++struct dwc_timer { ++ struct callout t; ++ char *name; ++ dwc_spinlock_t *lock; ++ dwc_timer_callback_t cb; ++ void *data; ++}; ++ ++dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data) ++{ ++ dwc_timer_t *t = DWC_ALLOC(sizeof(*t)); ++ ++ if (!t) { ++ DWC_ERROR("Cannot allocate memory for timer"); ++ return NULL; ++ } ++ ++ callout_init(&t->t); ++ ++ t->name = DWC_STRDUP(name); ++ if (!t->name) { ++ DWC_ERROR("Cannot allocate memory for timer->name"); ++ goto no_name; ++ } ++ ++ t->lock = DWC_SPINLOCK_ALLOC(); ++ if (!t->lock) { ++ DWC_ERROR("Cannot allocate memory for timer->lock"); ++ goto no_lock; ++ } ++ ++ t->cb = cb; ++ t->data = data; ++ ++ return t; ++ ++ no_lock: ++ DWC_FREE(t->name); ++ no_name: ++ DWC_FREE(t); ++ ++ return NULL; ++} ++ ++void DWC_TIMER_FREE(dwc_timer_t *timer) ++{ ++ callout_stop(&timer->t); ++ DWC_SPINLOCK_FREE(timer->lock); ++ DWC_FREE(timer->name); ++ DWC_FREE(timer); ++} ++ ++void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time) ++{ ++ struct timeval tv; ++ ++ tv.tv_sec = time / 1000; ++ tv.tv_usec = (time - tv.tv_sec * 1000) * 1000; ++ callout_reset(&timer->t, tvtohz(&tv), timer->cb, timer->data); ++} ++ ++void DWC_TIMER_CANCEL(dwc_timer_t *timer) ++{ ++ callout_stop(&timer->t); ++} ++ ++ ++/* Wait Queues */ ++ ++struct dwc_waitq { ++ struct simplelock lock; ++ int abort; ++}; ++ ++dwc_waitq_t *DWC_WAITQ_ALLOC(void) ++{ ++ dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq)); ++ ++ if (!wq) { ++ DWC_ERROR("Cannot allocate memory for waitqueue"); ++ return NULL; ++ } ++ ++ simple_lock_init(&wq->lock); ++ wq->abort = 0; ++ ++ return wq; ++} ++ ++void DWC_WAITQ_FREE(dwc_waitq_t *wq) ++{ ++ DWC_FREE(wq); ++} ++ ++int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data) ++{ ++ int ipl; ++ int result = 0; ++ ++ simple_lock(&wq->lock); ++ ipl = splbio(); ++ ++ /* Skip the sleep if already aborted or triggered */ ++ if (!wq->abort && !cond(data)) { ++ splx(ipl); ++ result = ltsleep(wq, PCATCH, "dw3wat", 0, &wq->lock); // infinite timeout ++ ipl = splbio(); ++ } ++ ++ if (result == 0) { // awoken ++ if (wq->abort) { ++ wq->abort = 0; ++ result = -DWC_E_ABORT; ++ } else { ++ result = 0; ++ } ++ ++ splx(ipl); ++ simple_unlock(&wq->lock); ++ } else { ++ wq->abort = 0; ++ splx(ipl); ++ simple_unlock(&wq->lock); ++ ++ if (result == ERESTART) { // signaled - restart ++ result = -DWC_E_RESTART; ++ } else { // signaled - must be EINTR ++ result = -DWC_E_ABORT; ++ } ++ } ++ ++ return result; ++} ++ ++int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, ++ void *data, int32_t msecs) ++{ ++ struct timeval tv, tv1, tv2; ++ int ipl; ++ int result = 0; ++ ++ tv.tv_sec = msecs / 1000; ++ tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000; ++ ++ simple_lock(&wq->lock); ++ ipl = splbio(); ++ ++ /* Skip the sleep if already aborted or triggered */ ++ if (!wq->abort && !cond(data)) { ++ splx(ipl); ++ getmicrouptime(&tv1); ++ result = ltsleep(wq, PCATCH, "dw3wto", tvtohz(&tv), &wq->lock); ++ getmicrouptime(&tv2); ++ ipl = splbio(); ++ } ++ ++ if (result == 0) { // awoken ++ if (wq->abort) { ++ wq->abort = 0; ++ splx(ipl); ++ simple_unlock(&wq->lock); ++ result = -DWC_E_ABORT; ++ } else { ++ splx(ipl); ++ simple_unlock(&wq->lock); ++ ++ tv2.tv_usec -= tv1.tv_usec; ++ if (tv2.tv_usec < 0) { ++ tv2.tv_usec += 1000000; ++ tv2.tv_sec--; ++ } ++ ++ tv2.tv_sec -= tv1.tv_sec; ++ result = tv2.tv_sec * 1000 + tv2.tv_usec / 1000; ++ result = msecs - result; ++ if (result <= 0) ++ result = 1; ++ } ++ } else { ++ wq->abort = 0; ++ splx(ipl); ++ simple_unlock(&wq->lock); ++ ++ if (result == ERESTART) { // signaled - restart ++ result = -DWC_E_RESTART; ++ ++ } else if (result == EINTR) { // signaled - interrupt ++ result = -DWC_E_ABORT; ++ ++ } else { // timed out ++ result = -DWC_E_TIMEOUT; ++ } ++ } ++ ++ return result; ++} ++ ++void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq) ++{ ++ wakeup(wq); ++} ++ ++void DWC_WAITQ_ABORT(dwc_waitq_t *wq) ++{ ++ int ipl; ++ ++ simple_lock(&wq->lock); ++ ipl = splbio(); ++ wq->abort = 1; ++ wakeup(wq); ++ splx(ipl); ++ simple_unlock(&wq->lock); ++} ++ ++ ++/* Threading */ ++ ++struct dwc_thread { ++ struct proc *proc; ++ int abort; ++}; ++ ++dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data) ++{ ++ int retval; ++ dwc_thread_t *thread = DWC_ALLOC(sizeof(*thread)); ++ ++ if (!thread) { ++ return NULL; ++ } ++ ++ thread->abort = 0; ++ retval = kthread_create1((void (*)(void *))func, data, &thread->proc, ++ "%s", name); ++ if (retval) { ++ DWC_FREE(thread); ++ return NULL; ++ } ++ ++ return thread; ++} ++ ++int DWC_THREAD_STOP(dwc_thread_t *thread) ++{ ++ int retval; ++ ++ thread->abort = 1; ++ retval = tsleep(&thread->abort, 0, "dw3stp", 60 * hz); ++ ++ if (retval == 0) { ++ /* DWC_THREAD_EXIT() will free the thread struct */ ++ return 0; ++ } ++ ++ /* NOTE: We leak the thread struct if thread doesn't die */ ++ ++ if (retval == EWOULDBLOCK) { ++ return -DWC_E_TIMEOUT; ++ } ++ ++ return -DWC_E_UNKNOWN; ++} ++ ++dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread) ++{ ++ return thread->abort; ++} ++ ++void DWC_THREAD_EXIT(dwc_thread_t *thread) ++{ ++ wakeup(&thread->abort); ++ DWC_FREE(thread); ++ kthread_exit(0); ++} ++ ++/* tasklets ++ - Runs in interrupt context (cannot sleep) ++ - Each tasklet runs on a single CPU ++ - Different tasklets can be running simultaneously on different CPUs ++ [ On NetBSD there is no corresponding mechanism, drivers don't have bottom- ++ halves. So we just call the callback directly from DWC_TASK_SCHEDULE() ] ++ */ ++struct dwc_tasklet { ++ dwc_tasklet_callback_t cb; ++ void *data; ++}; ++ ++static void tasklet_callback(void *data) ++{ ++ dwc_tasklet_t *task = (dwc_tasklet_t *)data; ++ ++ task->cb(task->data); ++} ++ ++dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data) ++{ ++ dwc_tasklet_t *task = DWC_ALLOC(sizeof(*task)); ++ ++ if (task) { ++ task->cb = cb; ++ task->data = data; ++ } else { ++ DWC_ERROR("Cannot allocate memory for tasklet"); ++ } ++ ++ return task; ++} ++ ++void DWC_TASK_FREE(dwc_tasklet_t *task) ++{ ++ DWC_FREE(task); ++} ++ ++void DWC_TASK_SCHEDULE(dwc_tasklet_t *task) ++{ ++ tasklet_callback(task); ++} ++ ++ ++/* workqueues ++ - Runs in process context (can sleep) ++ */ ++typedef struct work_container { ++ dwc_work_callback_t cb; ++ void *data; ++ dwc_workq_t *wq; ++ char *name; ++ int hz; ++ struct work task; ++} work_container_t; ++ ++struct dwc_workq { ++ struct workqueue *taskq; ++ dwc_spinlock_t *lock; ++ dwc_waitq_t *waitq; ++ int pending; ++ struct work_container *container; ++}; ++ ++static void do_work(struct work *task, void *data) ++{ ++ dwc_workq_t *wq = (dwc_workq_t *)data; ++ work_container_t *container = wq->container; ++ dwc_irqflags_t flags; ++ ++ if (container->hz) { ++ tsleep(container, 0, "dw3wrk", container->hz); ++ } ++ ++ container->cb(container->data); ++ DWC_DEBUG("Work done: %s, container=%p", container->name, container); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ if (container->name) ++ DWC_FREE(container->name); ++ DWC_FREE(container); ++ wq->pending--; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++} ++ ++static int work_done(void *data) ++{ ++ dwc_workq_t *workq = (dwc_workq_t *)data; ++ ++ return workq->pending == 0; ++} ++ ++int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout) ++{ ++ return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout); ++} ++ ++dwc_workq_t *DWC_WORKQ_ALLOC(char *name) ++{ ++ int result; ++ dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq)); ++ ++ if (!wq) { ++ DWC_ERROR("Cannot allocate memory for workqueue"); ++ return NULL; ++ } ++ ++ result = workqueue_create(&wq->taskq, name, do_work, wq, 0 /*PWAIT*/, ++ IPL_BIO, 0); ++ if (result) { ++ DWC_ERROR("Cannot create workqueue"); ++ goto no_taskq; ++ } ++ ++ wq->pending = 0; ++ ++ wq->lock = DWC_SPINLOCK_ALLOC(); ++ if (!wq->lock) { ++ DWC_ERROR("Cannot allocate memory for spinlock"); ++ goto no_lock; ++ } ++ ++ wq->waitq = DWC_WAITQ_ALLOC(); ++ if (!wq->waitq) { ++ DWC_ERROR("Cannot allocate memory for waitqueue"); ++ goto no_waitq; ++ } ++ ++ return wq; ++ ++ no_waitq: ++ DWC_SPINLOCK_FREE(wq->lock); ++ no_lock: ++ workqueue_destroy(wq->taskq); ++ no_taskq: ++ DWC_FREE(wq); ++ ++ return NULL; ++} ++ ++void DWC_WORKQ_FREE(dwc_workq_t *wq) ++{ ++#ifdef DEBUG ++ dwc_irqflags_t flags; ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ ++ if (wq->pending != 0) { ++ struct work_container *container = wq->container; ++ ++ DWC_ERROR("Destroying work queue with pending work"); ++ ++ if (container && container->name) { ++ DWC_ERROR("Work %s still pending", container->name); ++ } ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++#endif ++ DWC_WAITQ_FREE(wq->waitq); ++ DWC_SPINLOCK_FREE(wq->lock); ++ workqueue_destroy(wq->taskq); ++ DWC_FREE(wq); ++} ++ ++void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data, ++ char *format, ...) ++{ ++ dwc_irqflags_t flags; ++ work_container_t *container; ++ static char name[128]; ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VSNPRINTF(name, 128, format, args); ++ va_end(args); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ wq->pending++; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++ ++ container = DWC_ALLOC_ATOMIC(sizeof(*container)); ++ if (!container) { ++ DWC_ERROR("Cannot allocate memory for container"); ++ return; ++ } ++ ++ container->name = DWC_STRDUP(name); ++ if (!container->name) { ++ DWC_ERROR("Cannot allocate memory for container->name"); ++ DWC_FREE(container); ++ return; ++ } ++ ++ container->cb = cb; ++ container->data = data; ++ container->wq = wq; ++ container->hz = 0; ++ wq->container = container; ++ ++ DWC_DEBUG("Queueing work: %s, container=%p", container->name, container); ++ workqueue_enqueue(wq->taskq, &container->task); ++} ++ ++void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb, ++ void *data, uint32_t time, char *format, ...) ++{ ++ dwc_irqflags_t flags; ++ work_container_t *container; ++ static char name[128]; ++ struct timeval tv; ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VSNPRINTF(name, 128, format, args); ++ va_end(args); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ wq->pending++; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++ ++ container = DWC_ALLOC_ATOMIC(sizeof(*container)); ++ if (!container) { ++ DWC_ERROR("Cannot allocate memory for container"); ++ return; ++ } ++ ++ container->name = DWC_STRDUP(name); ++ if (!container->name) { ++ DWC_ERROR("Cannot allocate memory for container->name"); ++ DWC_FREE(container); ++ return; ++ } ++ ++ container->cb = cb; ++ container->data = data; ++ container->wq = wq; ++ tv.tv_sec = time / 1000; ++ tv.tv_usec = (time - tv.tv_sec * 1000) * 1000; ++ container->hz = tvtohz(&tv); ++ wq->container = container; ++ ++ DWC_DEBUG("Queueing work: %s, container=%p", container->name, container); ++ workqueue_enqueue(wq->taskq, &container->task); ++} ++ ++int DWC_WORKQ_PENDING(dwc_workq_t *wq) ++{ ++ return wq->pending; ++} +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_crypto.c +@@ -0,0 +1,308 @@ ++/* ========================================================================= ++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_crypto.c $ ++ * $Revision: #5 $ ++ * $Date: 2010/09/28 $ ++ * $Change: 1596182 $ ++ * ++ * Synopsys Portability Library Software and documentation ++ * (hereinafter, "Software") is an Unsupported proprietary work of ++ * Synopsys, Inc. unless otherwise expressly agreed to in writing ++ * between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product ++ * under any End User Software License Agreement or Agreement for ++ * Licensed Product with Synopsys or any supplement thereto. You are ++ * permitted to use and redistribute this Software in source and binary ++ * forms, with or without modification, provided that redistributions ++ * of source code must retain this notice. You may not view, use, ++ * disclose, copy or distribute this file or any information contained ++ * herein except pursuant to this license grant from Synopsys. If you ++ * do not agree with this notice, including the disclaimer below, then ++ * you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" ++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL ++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY ++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE ++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================= */ ++ ++/** @file ++ * This file contains the WUSB cryptographic routines. ++ */ ++ ++#ifdef DWC_CRYPTOLIB ++ ++#include "dwc_crypto.h" ++#include "usb.h" ++ ++#ifdef DEBUG ++static inline void dump_bytes(char *name, uint8_t *bytes, int len) ++{ ++ int i; ++ DWC_PRINTF("%s: ", name); ++ for (i=0; i<len; i++) { ++ DWC_PRINTF("%02x ", bytes[i]); ++ } ++ DWC_PRINTF("\n"); ++} ++#else ++#define dump_bytes(x...) ++#endif ++ ++/* Display a block */ ++void show_block(const u8 *blk, const char *prefix, const char *suffix, int a) ++{ ++#ifdef DWC_DEBUG_CRYPTO ++ int i, blksize = 16; ++ ++ DWC_DEBUG("%s", prefix); ++ ++ if (suffix == NULL) { ++ suffix = "\n"; ++ blksize = a; ++ } ++ ++ for (i = 0; i < blksize; i++) ++ DWC_PRINT("%02x%s", *blk++, ((i & 3) == 3) ? " " : " "); ++ DWC_PRINT(suffix); ++#endif ++} ++ ++/** ++ * Encrypts an array of bytes using the AES encryption engine. ++ * If <code>dst</code> == <code>src</code>, then the bytes will be encrypted ++ * in-place. ++ * ++ * @return 0 on success, negative error code on error. ++ */ ++int dwc_wusb_aes_encrypt(u8 *src, u8 *key, u8 *dst) ++{ ++ u8 block_t[16]; ++ DWC_MEMSET(block_t, 0, 16); ++ ++ return DWC_AES_CBC(src, 16, key, 16, block_t, dst); ++} ++ ++/** ++ * The CCM-MAC-FUNCTION described in section 6.5 of the WUSB spec. ++ * This function takes a data string and returns the encrypted CBC ++ * Counter-mode MIC. ++ * ++ * @param key The 128-bit symmetric key. ++ * @param nonce The CCM nonce. ++ * @param label The unique 14-byte ASCII text label. ++ * @param bytes The byte array to be encrypted. ++ * @param len Length of the byte array. ++ * @param result Byte array to receive the 8-byte encrypted MIC. ++ */ ++void dwc_wusb_cmf(u8 *key, u8 *nonce, ++ char *label, u8 *bytes, int len, u8 *result) ++{ ++ u8 block_m[16]; ++ u8 block_x[16]; ++ u8 block_t[8]; ++ int idx, blkNum; ++ u16 la = (u16)(len + 14); ++ ++ /* Set the AES-128 key */ ++ //dwc_aes_setkey(tfm, key, 16); ++ ++ /* Fill block B0 from flags = 0x59, N, and l(m) = 0 */ ++ block_m[0] = 0x59; ++ for (idx = 0; idx < 13; idx++) ++ block_m[idx + 1] = nonce[idx]; ++ block_m[14] = 0; ++ block_m[15] = 0; ++ ++ /* Produce the CBC IV */ ++ dwc_wusb_aes_encrypt(block_m, key, block_x); ++ show_block(block_m, "CBC IV in: ", "\n", 0); ++ show_block(block_x, "CBC IV out:", "\n", 0); ++ ++ /* Fill block B1 from l(a) = Blen + 14, and A */ ++ block_x[0] ^= (u8)(la >> 8); ++ block_x[1] ^= (u8)la; ++ for (idx = 0; idx < 14; idx++) ++ block_x[idx + 2] ^= label[idx]; ++ show_block(block_x, "After xor: ", "b1\n", 16); ++ ++ dwc_wusb_aes_encrypt(block_x, key, block_x); ++ show_block(block_x, "After AES: ", "b1\n", 16); ++ ++ idx = 0; ++ blkNum = 0; ++ ++ /* Fill remaining blocks with B */ ++ while (len-- > 0) { ++ block_x[idx] ^= *bytes++; ++ if (++idx >= 16) { ++ idx = 0; ++ show_block(block_x, "After xor: ", "\n", blkNum); ++ dwc_wusb_aes_encrypt(block_x, key, block_x); ++ show_block(block_x, "After AES: ", "\n", blkNum); ++ blkNum++; ++ } ++ } ++ ++ /* Handle partial last block */ ++ if (idx > 0) { ++ show_block(block_x, "After xor: ", "\n", blkNum); ++ dwc_wusb_aes_encrypt(block_x, key, block_x); ++ show_block(block_x, "After AES: ", "\n", blkNum); ++ } ++ ++ /* Save the MIC tag */ ++ DWC_MEMCPY(block_t, block_x, 8); ++ show_block(block_t, "MIC tag : ", NULL, 8); ++ ++ /* Fill block A0 from flags = 0x01, N, and counter = 0 */ ++ block_m[0] = 0x01; ++ block_m[14] = 0; ++ block_m[15] = 0; ++ ++ /* Encrypt the counter */ ++ dwc_wusb_aes_encrypt(block_m, key, block_x); ++ show_block(block_x, "CTR[MIC] : ", NULL, 8); ++ ++ /* XOR with MIC tag */ ++ for (idx = 0; idx < 8; idx++) { ++ block_t[idx] ^= block_x[idx]; ++ } ++ ++ /* Return result to caller */ ++ DWC_MEMCPY(result, block_t, 8); ++ show_block(result, "CCM-MIC : ", NULL, 8); ++ ++} ++ ++/** ++ * The PRF function described in section 6.5 of the WUSB spec. This function ++ * concatenates MIC values returned from dwc_cmf() to create a value of ++ * the requested length. ++ * ++ * @param prf_len Length of the PRF function in bits (64, 128, or 256). ++ * @param key, nonce, label, bytes, len Same as for dwc_cmf(). ++ * @param result Byte array to receive the result. ++ */ ++void dwc_wusb_prf(int prf_len, u8 *key, ++ u8 *nonce, char *label, u8 *bytes, int len, u8 *result) ++{ ++ int i; ++ ++ nonce[0] = 0; ++ for (i = 0; i < prf_len >> 6; i++, nonce[0]++) { ++ dwc_wusb_cmf(key, nonce, label, bytes, len, result); ++ result += 8; ++ } ++} ++ ++/** ++ * Fills in CCM Nonce per the WUSB spec. ++ * ++ * @param[in] haddr Host address. ++ * @param[in] daddr Device address. ++ * @param[in] tkid Session Key(PTK) identifier. ++ * @param[out] nonce Pointer to where the CCM Nonce output is to be written. ++ */ ++void dwc_wusb_fill_ccm_nonce(uint16_t haddr, uint16_t daddr, uint8_t *tkid, ++ uint8_t *nonce) ++{ ++ ++ DWC_DEBUG("%s %x %x\n", __func__, daddr, haddr); ++ ++ DWC_MEMSET(&nonce[0], 0, 16); ++ ++ DWC_MEMCPY(&nonce[6], tkid, 3); ++ nonce[9] = daddr & 0xFF; ++ nonce[10] = (daddr >> 8) & 0xFF; ++ nonce[11] = haddr & 0xFF; ++ nonce[12] = (haddr >> 8) & 0xFF; ++ ++ dump_bytes("CCM nonce", nonce, 16); ++} ++ ++/** ++ * Generates a 16-byte cryptographic-grade random number for the Host/Device ++ * Nonce. ++ */ ++void dwc_wusb_gen_nonce(uint16_t addr, uint8_t *nonce) ++{ ++ uint8_t inonce[16]; ++ uint32_t temp[4]; ++ ++ /* Fill in the Nonce */ ++ DWC_MEMSET(&inonce[0], 0, sizeof(inonce)); ++ inonce[9] = addr & 0xFF; ++ inonce[10] = (addr >> 8) & 0xFF; ++ inonce[11] = inonce[9]; ++ inonce[12] = inonce[10]; ++ ++ /* Collect "randomness samples" */ ++ DWC_RANDOM_BYTES((uint8_t *)temp, 16); ++ ++ dwc_wusb_prf_128((uint8_t *)temp, nonce, ++ "Random Numbers", (uint8_t *)temp, sizeof(temp), ++ nonce); ++} ++ ++/** ++ * Generates the Session Key (PTK) and Key Confirmation Key (KCK) per the ++ * WUSB spec. ++ * ++ * @param[in] ccm_nonce Pointer to CCM Nonce. ++ * @param[in] mk Master Key to derive the session from ++ * @param[in] hnonce Pointer to Host Nonce. ++ * @param[in] dnonce Pointer to Device Nonce. ++ * @param[out] kck Pointer to where the KCK output is to be written. ++ * @param[out] ptk Pointer to where the PTK output is to be written. ++ */ ++void dwc_wusb_gen_key(uint8_t *ccm_nonce, uint8_t *mk, uint8_t *hnonce, ++ uint8_t *dnonce, uint8_t *kck, uint8_t *ptk) ++{ ++ uint8_t idata[32]; ++ uint8_t odata[32]; ++ ++ dump_bytes("ck", mk, 16); ++ dump_bytes("hnonce", hnonce, 16); ++ dump_bytes("dnonce", dnonce, 16); ++ ++ /* The data is the HNonce and DNonce concatenated */ ++ DWC_MEMCPY(&idata[0], hnonce, 16); ++ DWC_MEMCPY(&idata[16], dnonce, 16); ++ ++ dwc_wusb_prf_256(mk, ccm_nonce, "Pair-wise keys", idata, 32, odata); ++ ++ /* Low 16 bytes of the result is the KCK, high 16 is the PTK */ ++ DWC_MEMCPY(kck, &odata[0], 16); ++ DWC_MEMCPY(ptk, &odata[16], 16); ++ ++ dump_bytes("kck", kck, 16); ++ dump_bytes("ptk", ptk, 16); ++} ++ ++/** ++ * Generates the Message Integrity Code over the Handshake data per the ++ * WUSB spec. ++ * ++ * @param ccm_nonce Pointer to CCM Nonce. ++ * @param kck Pointer to Key Confirmation Key. ++ * @param data Pointer to Handshake data to be checked. ++ * @param mic Pointer to where the MIC output is to be written. ++ */ ++void dwc_wusb_gen_mic(uint8_t *ccm_nonce, uint8_t *kck, ++ uint8_t *data, uint8_t *mic) ++{ ++ ++ dwc_wusb_prf_64(kck, ccm_nonce, "out-of-bandMIC", ++ data, WUSB_HANDSHAKE_LEN_FOR_MIC, mic); ++} ++ ++#endif /* DWC_CRYPTOLIB */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_crypto.h +@@ -0,0 +1,111 @@ ++/* ========================================================================= ++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_crypto.h $ ++ * $Revision: #3 $ ++ * $Date: 2010/09/28 $ ++ * $Change: 1596182 $ ++ * ++ * Synopsys Portability Library Software and documentation ++ * (hereinafter, "Software") is an Unsupported proprietary work of ++ * Synopsys, Inc. unless otherwise expressly agreed to in writing ++ * between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product ++ * under any End User Software License Agreement or Agreement for ++ * Licensed Product with Synopsys or any supplement thereto. You are ++ * permitted to use and redistribute this Software in source and binary ++ * forms, with or without modification, provided that redistributions ++ * of source code must retain this notice. You may not view, use, ++ * disclose, copy or distribute this file or any information contained ++ * herein except pursuant to this license grant from Synopsys. If you ++ * do not agree with this notice, including the disclaimer below, then ++ * you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" ++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL ++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY ++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE ++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================= */ ++ ++#ifndef _DWC_CRYPTO_H_ ++#define _DWC_CRYPTO_H_ ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++/** @file ++ * ++ * This file contains declarations for the WUSB Cryptographic routines as ++ * defined in the WUSB spec. They are only to be used internally by the DWC UWB ++ * modules. ++ */ ++ ++#include "dwc_os.h" ++ ++int dwc_wusb_aes_encrypt(u8 *src, u8 *key, u8 *dst); ++ ++void dwc_wusb_cmf(u8 *key, u8 *nonce, ++ char *label, u8 *bytes, int len, u8 *result); ++void dwc_wusb_prf(int prf_len, u8 *key, ++ u8 *nonce, char *label, u8 *bytes, int len, u8 *result); ++ ++/** ++ * The PRF-64 function described in section 6.5 of the WUSB spec. ++ * ++ * @param key, nonce, label, bytes, len, result Same as for dwc_prf(). ++ */ ++static inline void dwc_wusb_prf_64(u8 *key, u8 *nonce, ++ char *label, u8 *bytes, int len, u8 *result) ++{ ++ dwc_wusb_prf(64, key, nonce, label, bytes, len, result); ++} ++ ++/** ++ * The PRF-128 function described in section 6.5 of the WUSB spec. ++ * ++ * @param key, nonce, label, bytes, len, result Same as for dwc_prf(). ++ */ ++static inline void dwc_wusb_prf_128(u8 *key, u8 *nonce, ++ char *label, u8 *bytes, int len, u8 *result) ++{ ++ dwc_wusb_prf(128, key, nonce, label, bytes, len, result); ++} ++ ++/** ++ * The PRF-256 function described in section 6.5 of the WUSB spec. ++ * ++ * @param key, nonce, label, bytes, len, result Same as for dwc_prf(). ++ */ ++static inline void dwc_wusb_prf_256(u8 *key, u8 *nonce, ++ char *label, u8 *bytes, int len, u8 *result) ++{ ++ dwc_wusb_prf(256, key, nonce, label, bytes, len, result); ++} ++ ++ ++void dwc_wusb_fill_ccm_nonce(uint16_t haddr, uint16_t daddr, uint8_t *tkid, ++ uint8_t *nonce); ++void dwc_wusb_gen_nonce(uint16_t addr, ++ uint8_t *nonce); ++ ++void dwc_wusb_gen_key(uint8_t *ccm_nonce, uint8_t *mk, ++ uint8_t *hnonce, uint8_t *dnonce, ++ uint8_t *kck, uint8_t *ptk); ++ ++ ++void dwc_wusb_gen_mic(uint8_t *ccm_nonce, uint8_t ++ *kck, uint8_t *data, uint8_t *mic); ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* _DWC_CRYPTO_H_ */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_dh.c +@@ -0,0 +1,291 @@ ++/* ========================================================================= ++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_dh.c $ ++ * $Revision: #3 $ ++ * $Date: 2010/09/28 $ ++ * $Change: 1596182 $ ++ * ++ * Synopsys Portability Library Software and documentation ++ * (hereinafter, "Software") is an Unsupported proprietary work of ++ * Synopsys, Inc. unless otherwise expressly agreed to in writing ++ * between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product ++ * under any End User Software License Agreement or Agreement for ++ * Licensed Product with Synopsys or any supplement thereto. You are ++ * permitted to use and redistribute this Software in source and binary ++ * forms, with or without modification, provided that redistributions ++ * of source code must retain this notice. You may not view, use, ++ * disclose, copy or distribute this file or any information contained ++ * herein except pursuant to this license grant from Synopsys. If you ++ * do not agree with this notice, including the disclaimer below, then ++ * you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" ++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL ++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY ++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE ++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================= */ ++#ifdef DWC_CRYPTOLIB ++ ++#ifndef CONFIG_MACH_IPMATE ++ ++#include "dwc_dh.h" ++#include "dwc_modpow.h" ++ ++#ifdef DEBUG ++/* This function prints out a buffer in the format described in the Association ++ * Model specification. */ ++static void dh_dump(char *str, void *_num, int len) ++{ ++ uint8_t *num = _num; ++ int i; ++ DWC_PRINTF("%s\n", str); ++ for (i = 0; i < len; i ++) { ++ DWC_PRINTF("%02x", num[i]); ++ if (((i + 1) % 2) == 0) DWC_PRINTF(" "); ++ if (((i + 1) % 26) == 0) DWC_PRINTF("\n"); ++ } ++ ++ DWC_PRINTF("\n"); ++} ++#else ++#define dh_dump(_x...) do {; } while(0) ++#endif ++ ++/* Constant g value */ ++static __u32 dh_g[] = { ++ 0x02000000, ++}; ++ ++/* Constant p value */ ++static __u32 dh_p[] = { ++ 0xFFFFFFFF, 0xFFFFFFFF, 0xA2DA0FC9, 0x34C26821, 0x8B62C6C4, 0xD11CDC80, 0x084E0229, 0x74CC678A, ++ 0xA6BE0B02, 0x229B133B, 0x79084A51, 0xDD04348E, 0xB31995EF, 0x1B433ACD, 0x6D0A2B30, 0x37145FF2, ++ 0x6D35E14F, 0x45C2516D, 0x76B585E4, 0xC67E5E62, 0xE9424CF4, 0x6BED37A6, 0xB65CFF0B, 0xEDB706F4, ++ 0xFB6B38EE, 0xA59F895A, 0x11249FAE, 0xE61F4B7C, 0x51662849, 0x3D5BE4EC, 0xB87C00C2, 0x05BF63A1, ++ 0x3648DA98, 0x9AD3551C, 0xA83F1669, 0x5FCF24FD, 0x235D6583, 0x96ADA3DC, 0x56F3621C, 0xBB528520, ++ 0x0729D59E, 0x6D969670, 0x4E350C67, 0x0498BC4A, 0x086C74F1, 0x7C2118CA, 0x465E9032, 0x3BCE362E, ++ 0x2C779EE3, 0x03860E18, 0xA283279B, 0x8FA207EC, 0xF05DC5B5, 0xC9524C6F, 0xF6CB2BDE, 0x18175895, ++ 0x7C499539, 0xE56A95EA, 0x1826D215, 0x1005FA98, 0x5A8E7215, 0x2DC4AA8A, 0x0D1733AD, 0x337A5004, ++ 0xAB2155A8, 0x64BA1CDF, 0x0485FBEC, 0x0AEFDB58, 0x5771EA8A, 0x7D0C065D, 0x850F97B3, 0xC7E4E1A6, ++ 0x8CAEF5AB, 0xD73309DB, 0xE0948C1E, 0x9D61254A, 0x26D2E3CE, 0x6BEED21A, 0x06FA2FF1, 0x64088AD9, ++ 0x730276D8, 0x646AC83E, 0x182B1F52, 0x0C207B17, 0x5717E1BB, 0x6C5D617A, 0xC0880977, 0xE246D9BA, ++ 0xA04FE208, 0x31ABE574, 0xFC5BDB43, 0x8E10FDE0, 0x20D1824B, 0xCAD23AA9, 0xFFFFFFFF, 0xFFFFFFFF, ++}; ++ ++static void dh_swap_bytes(void *_in, void *_out, uint32_t len) ++{ ++ uint8_t *in = _in; ++ uint8_t *out = _out; ++ int i; ++ for (i=0; i<len; i++) { ++ out[i] = in[len-1-i]; ++ } ++} ++ ++/* Computes the modular exponentiation (num^exp % mod). num, exp, and mod are ++ * big endian numbers of size len, in bytes. Each len value must be a multiple ++ * of 4. */ ++int dwc_dh_modpow(void *mem_ctx, void *num, uint32_t num_len, ++ void *exp, uint32_t exp_len, ++ void *mod, uint32_t mod_len, ++ void *out) ++{ ++ /* modpow() takes little endian numbers. AM uses big-endian. This ++ * function swaps bytes of numbers before passing onto modpow. */ ++ ++ int retval = 0; ++ uint32_t *result; ++ ++ uint32_t *bignum_num = dwc_alloc(mem_ctx, num_len + 4); ++ uint32_t *bignum_exp = dwc_alloc(mem_ctx, exp_len + 4); ++ uint32_t *bignum_mod = dwc_alloc(mem_ctx, mod_len + 4); ++ ++ dh_swap_bytes(num, &bignum_num[1], num_len); ++ bignum_num[0] = num_len / 4; ++ ++ dh_swap_bytes(exp, &bignum_exp[1], exp_len); ++ bignum_exp[0] = exp_len / 4; ++ ++ dh_swap_bytes(mod, &bignum_mod[1], mod_len); ++ bignum_mod[0] = mod_len / 4; ++ ++ result = dwc_modpow(mem_ctx, bignum_num, bignum_exp, bignum_mod); ++ if (!result) { ++ retval = -1; ++ goto dh_modpow_nomem; ++ } ++ ++ dh_swap_bytes(&result[1], out, result[0] * 4); ++ dwc_free(mem_ctx, result); ++ ++ dh_modpow_nomem: ++ dwc_free(mem_ctx, bignum_num); ++ dwc_free(mem_ctx, bignum_exp); ++ dwc_free(mem_ctx, bignum_mod); ++ return retval; ++} ++ ++ ++int dwc_dh_pk(void *mem_ctx, uint8_t nd, uint8_t *exp, uint8_t *pk, uint8_t *hash) ++{ ++ int retval; ++ uint8_t m3[385]; ++ ++#ifndef DH_TEST_VECTORS ++ DWC_RANDOM_BYTES(exp, 32); ++#endif ++ ++ /* Compute the pkd */ ++ if ((retval = dwc_dh_modpow(mem_ctx, dh_g, 4, ++ exp, 32, ++ dh_p, 384, pk))) { ++ return retval; ++ } ++ ++ m3[384] = nd; ++ DWC_MEMCPY(&m3[0], pk, 384); ++ DWC_SHA256(m3, 385, hash); ++ ++ dh_dump("PK", pk, 384); ++ dh_dump("SHA-256(M3)", hash, 32); ++ return 0; ++} ++ ++int dwc_dh_derive_keys(void *mem_ctx, uint8_t nd, uint8_t *pkh, uint8_t *pkd, ++ uint8_t *exp, int is_host, ++ char *dd, uint8_t *ck, uint8_t *kdk) ++{ ++ int retval; ++ uint8_t mv[784]; ++ uint8_t sha_result[32]; ++ uint8_t dhkey[384]; ++ uint8_t shared_secret[384]; ++ char *message; ++ uint32_t vd; ++ ++ uint8_t *pk; ++ ++ if (is_host) { ++ pk = pkd; ++ } ++ else { ++ pk = pkh; ++ } ++ ++ if ((retval = dwc_dh_modpow(mem_ctx, pk, 384, ++ exp, 32, ++ dh_p, 384, shared_secret))) { ++ return retval; ++ } ++ dh_dump("Shared Secret", shared_secret, 384); ++ ++ DWC_SHA256(shared_secret, 384, dhkey); ++ dh_dump("DHKEY", dhkey, 384); ++ ++ DWC_MEMCPY(&mv[0], pkd, 384); ++ DWC_MEMCPY(&mv[384], pkh, 384); ++ DWC_MEMCPY(&mv[768], "displayed digest", 16); ++ dh_dump("MV", mv, 784); ++ ++ DWC_SHA256(mv, 784, sha_result); ++ dh_dump("SHA-256(MV)", sha_result, 32); ++ dh_dump("First 32-bits of SHA-256(MV)", sha_result, 4); ++ ++ dh_swap_bytes(sha_result, &vd, 4); ++#ifdef DEBUG ++ DWC_PRINTF("Vd (decimal) = %d\n", vd); ++#endif ++ ++ switch (nd) { ++ case 2: ++ vd = vd % 100; ++ DWC_SPRINTF(dd, "%02d", vd); ++ break; ++ case 3: ++ vd = vd % 1000; ++ DWC_SPRINTF(dd, "%03d", vd); ++ break; ++ case 4: ++ vd = vd % 10000; ++ DWC_SPRINTF(dd, "%04d", vd); ++ break; ++ } ++#ifdef DEBUG ++ DWC_PRINTF("Display Digits: %s\n", dd); ++#endif ++ ++ message = "connection key"; ++ DWC_HMAC_SHA256(message, DWC_STRLEN(message), dhkey, 32, sha_result); ++ dh_dump("HMAC(SHA-256, DHKey, connection key)", sha_result, 32); ++ DWC_MEMCPY(ck, sha_result, 16); ++ ++ message = "key derivation key"; ++ DWC_HMAC_SHA256(message, DWC_STRLEN(message), dhkey, 32, sha_result); ++ dh_dump("HMAC(SHA-256, DHKey, key derivation key)", sha_result, 32); ++ DWC_MEMCPY(kdk, sha_result, 32); ++ ++ return 0; ++} ++ ++ ++#ifdef DH_TEST_VECTORS ++ ++static __u8 dh_a[] = { ++ 0x44, 0x00, 0x51, 0xd6, ++ 0xf0, 0xb5, 0x5e, 0xa9, ++ 0x67, 0xab, 0x31, 0xc6, ++ 0x8a, 0x8b, 0x5e, 0x37, ++ 0xd9, 0x10, 0xda, 0xe0, ++ 0xe2, 0xd4, 0x59, 0xa4, ++ 0x86, 0x45, 0x9c, 0xaa, ++ 0xdf, 0x36, 0x75, 0x16, ++}; ++ ++static __u8 dh_b[] = { ++ 0x5d, 0xae, 0xc7, 0x86, ++ 0x79, 0x80, 0xa3, 0x24, ++ 0x8c, 0xe3, 0x57, 0x8f, ++ 0xc7, 0x5f, 0x1b, 0x0f, ++ 0x2d, 0xf8, 0x9d, 0x30, ++ 0x6f, 0xa4, 0x52, 0xcd, ++ 0xe0, 0x7a, 0x04, 0x8a, ++ 0xde, 0xd9, 0x26, 0x56, ++}; ++ ++void dwc_run_dh_test_vectors(void *mem_ctx) ++{ ++ uint8_t pkd[384]; ++ uint8_t pkh[384]; ++ uint8_t hashd[32]; ++ uint8_t hashh[32]; ++ uint8_t ck[16]; ++ uint8_t kdk[32]; ++ char dd[5]; ++ ++ DWC_PRINTF("\n\n\nDH_TEST_VECTORS\n\n"); ++ ++ /* compute the PKd and SHA-256(PKd || Nd) */ ++ DWC_PRINTF("Computing PKd\n"); ++ dwc_dh_pk(mem_ctx, 2, dh_a, pkd, hashd); ++ ++ /* compute the PKd and SHA-256(PKh || Nd) */ ++ DWC_PRINTF("Computing PKh\n"); ++ dwc_dh_pk(mem_ctx, 2, dh_b, pkh, hashh); ++ ++ /* compute the dhkey */ ++ dwc_dh_derive_keys(mem_ctx, 2, pkh, pkd, dh_a, 0, dd, ck, kdk); ++} ++#endif /* DH_TEST_VECTORS */ ++ ++#endif /* !CONFIG_MACH_IPMATE */ ++ ++#endif /* DWC_CRYPTOLIB */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_dh.h +@@ -0,0 +1,106 @@ ++/* ========================================================================= ++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_dh.h $ ++ * $Revision: #4 $ ++ * $Date: 2010/09/28 $ ++ * $Change: 1596182 $ ++ * ++ * Synopsys Portability Library Software and documentation ++ * (hereinafter, "Software") is an Unsupported proprietary work of ++ * Synopsys, Inc. unless otherwise expressly agreed to in writing ++ * between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product ++ * under any End User Software License Agreement or Agreement for ++ * Licensed Product with Synopsys or any supplement thereto. You are ++ * permitted to use and redistribute this Software in source and binary ++ * forms, with or without modification, provided that redistributions ++ * of source code must retain this notice. You may not view, use, ++ * disclose, copy or distribute this file or any information contained ++ * herein except pursuant to this license grant from Synopsys. If you ++ * do not agree with this notice, including the disclaimer below, then ++ * you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" ++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL ++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY ++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE ++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================= */ ++#ifndef _DWC_DH_H_ ++#define _DWC_DH_H_ ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "dwc_os.h" ++ ++/** @file ++ * ++ * This file defines the common functions on device and host for performing ++ * numeric association as defined in the WUSB spec. They are only to be ++ * used internally by the DWC UWB modules. */ ++ ++extern int dwc_dh_sha256(uint8_t *message, uint32_t len, uint8_t *out); ++extern int dwc_dh_hmac_sha256(uint8_t *message, uint32_t messagelen, ++ uint8_t *key, uint32_t keylen, ++ uint8_t *out); ++extern int dwc_dh_modpow(void *mem_ctx, void *num, uint32_t num_len, ++ void *exp, uint32_t exp_len, ++ void *mod, uint32_t mod_len, ++ void *out); ++ ++/** Computes PKD or PKH, and SHA-256(PKd || Nd) ++ * ++ * PK = g^exp mod p. ++ * ++ * Input: ++ * Nd = Number of digits on the device. ++ * ++ * Output: ++ * exp = A 32-byte buffer to be filled with a randomly generated number. ++ * used as either A or B. ++ * pk = A 384-byte buffer to be filled with the PKH or PKD. ++ * hash = A 32-byte buffer to be filled with SHA-256(PK || ND). ++ */ ++extern int dwc_dh_pk(void *mem_ctx, uint8_t nd, uint8_t *exp, uint8_t *pkd, uint8_t *hash); ++ ++/** Computes the DHKEY, and VD. ++ * ++ * If called from host, then it will comput DHKEY=PKD^exp % p. ++ * If called from device, then it will comput DHKEY=PKH^exp % p. ++ * ++ * Input: ++ * pkd = The PKD value. ++ * pkh = The PKH value. ++ * exp = The A value (if device) or B value (if host) generated in dwc_wudev_dh_pk. ++ * is_host = Set to non zero if a WUSB host is calling this function. ++ * ++ * Output: ++ ++ * dd = A pointer to an buffer to be set to the displayed digits string to be shown ++ * to the user. This buffer should be at 5 bytes long to hold 4 digits plus a ++ * null termination character. This buffer can be used directly for display. ++ * ck = A 16-byte buffer to be filled with the CK. ++ * kdk = A 32-byte buffer to be filled with the KDK. ++ */ ++extern int dwc_dh_derive_keys(void *mem_ctx, uint8_t nd, uint8_t *pkh, uint8_t *pkd, ++ uint8_t *exp, int is_host, ++ char *dd, uint8_t *ck, uint8_t *kdk); ++ ++#ifdef DH_TEST_VECTORS ++extern void dwc_run_dh_test_vectors(void); ++#endif ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* _DWC_DH_H_ */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_list.h +@@ -0,0 +1,594 @@ ++/* $OpenBSD: queue.h,v 1.26 2004/05/04 16:59:32 grange Exp $ */ ++/* $NetBSD: queue.h,v 1.11 1996/05/16 05:17:14 mycroft Exp $ */ ++ ++/* ++ * Copyright (c) 1991, 1993 ++ * The Regents of the University of California. All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. Neither the name of the University nor the names of its contributors ++ * may be used to endorse or promote products derived from this software ++ * without specific prior written permission. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ++ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE ++ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL ++ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS ++ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) ++ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF ++ * SUCH DAMAGE. ++ * ++ * @(#)queue.h 8.5 (Berkeley) 8/20/94 ++ */ ++ ++#ifndef _DWC_LIST_H_ ++#define _DWC_LIST_H_ ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++/** @file ++ * ++ * This file defines linked list operations. It is derived from BSD with ++ * only the MACRO names being prefixed with DWC_. This is because a few of ++ * these names conflict with those on Linux. For documentation on use, see the ++ * inline comments in the source code. The original license for this source ++ * code applies and is preserved in the dwc_list.h source file. ++ */ ++ ++/* ++ * This file defines five types of data structures: singly-linked lists, ++ * lists, simple queues, tail queues, and circular queues. ++ * ++ * ++ * A singly-linked list is headed by a single forward pointer. The elements ++ * are singly linked for minimum space and pointer manipulation overhead at ++ * the expense of O(n) removal for arbitrary elements. New elements can be ++ * added to the list after an existing element or at the head of the list. ++ * Elements being removed from the head of the list should use the explicit ++ * macro for this purpose for optimum efficiency. A singly-linked list may ++ * only be traversed in the forward direction. Singly-linked lists are ideal ++ * for applications with large datasets and few or no removals or for ++ * implementing a LIFO queue. ++ * ++ * A list is headed by a single forward pointer (or an array of forward ++ * pointers for a hash table header). The elements are doubly linked ++ * so that an arbitrary element can be removed without a need to ++ * traverse the list. New elements can be added to the list before ++ * or after an existing element or at the head of the list. A list ++ * may only be traversed in the forward direction. ++ * ++ * A simple queue is headed by a pair of pointers, one the head of the ++ * list and the other to the tail of the list. The elements are singly ++ * linked to save space, so elements can only be removed from the ++ * head of the list. New elements can be added to the list before or after ++ * an existing element, at the head of the list, or at the end of the ++ * list. A simple queue may only be traversed in the forward direction. ++ * ++ * A tail queue is headed by a pair of pointers, one to the head of the ++ * list and the other to the tail of the list. The elements are doubly ++ * linked so that an arbitrary element can be removed without a need to ++ * traverse the list. New elements can be added to the list before or ++ * after an existing element, at the head of the list, or at the end of ++ * the list. A tail queue may be traversed in either direction. ++ * ++ * A circle queue is headed by a pair of pointers, one to the head of the ++ * list and the other to the tail of the list. The elements are doubly ++ * linked so that an arbitrary element can be removed without a need to ++ * traverse the list. New elements can be added to the list before or after ++ * an existing element, at the head of the list, or at the end of the list. ++ * A circle queue may be traversed in either direction, but has a more ++ * complex end of list detection. ++ * ++ * For details on the use of these macros, see the queue(3) manual page. ++ */ ++ ++/* ++ * Double-linked List. ++ */ ++ ++typedef struct dwc_list_link { ++ struct dwc_list_link *next; ++ struct dwc_list_link *prev; ++} dwc_list_link_t; ++ ++#define DWC_LIST_INIT(link) do { \ ++ (link)->next = (link); \ ++ (link)->prev = (link); \ ++} while (0) ++ ++#define DWC_LIST_FIRST(link) ((link)->next) ++#define DWC_LIST_LAST(link) ((link)->prev) ++#define DWC_LIST_END(link) (link) ++#define DWC_LIST_NEXT(link) ((link)->next) ++#define DWC_LIST_PREV(link) ((link)->prev) ++#define DWC_LIST_EMPTY(link) \ ++ (DWC_LIST_FIRST(link) == DWC_LIST_END(link)) ++#define DWC_LIST_ENTRY(link, type, field) \ ++ (type *)((uint8_t *)(link) - (size_t)(&((type *)0)->field)) ++ ++#if 0 ++#define DWC_LIST_INSERT_HEAD(list, link) do { \ ++ (link)->next = (list)->next; \ ++ (link)->prev = (list); \ ++ (list)->next->prev = (link); \ ++ (list)->next = (link); \ ++} while (0) ++ ++#define DWC_LIST_INSERT_TAIL(list, link) do { \ ++ (link)->next = (list); \ ++ (link)->prev = (list)->prev; \ ++ (list)->prev->next = (link); \ ++ (list)->prev = (link); \ ++} while (0) ++#else ++#define DWC_LIST_INSERT_HEAD(list, link) do { \ ++ dwc_list_link_t *__next__ = (list)->next; \ ++ __next__->prev = (link); \ ++ (link)->next = __next__; \ ++ (link)->prev = (list); \ ++ (list)->next = (link); \ ++} while (0) ++ ++#define DWC_LIST_INSERT_TAIL(list, link) do { \ ++ dwc_list_link_t *__prev__ = (list)->prev; \ ++ (list)->prev = (link); \ ++ (link)->next = (list); \ ++ (link)->prev = __prev__; \ ++ __prev__->next = (link); \ ++} while (0) ++#endif ++ ++#if 0 ++static inline void __list_add(struct list_head *new, ++ struct list_head *prev, ++ struct list_head *next) ++{ ++ next->prev = new; ++ new->next = next; ++ new->prev = prev; ++ prev->next = new; ++} ++ ++static inline void list_add(struct list_head *new, struct list_head *head) ++{ ++ __list_add(new, head, head->next); ++} ++ ++static inline void list_add_tail(struct list_head *new, struct list_head *head) ++{ ++ __list_add(new, head->prev, head); ++} ++ ++static inline void __list_del(struct list_head * prev, struct list_head * next) ++{ ++ next->prev = prev; ++ prev->next = next; ++} ++ ++static inline void list_del(struct list_head *entry) ++{ ++ __list_del(entry->prev, entry->next); ++ entry->next = LIST_POISON1; ++ entry->prev = LIST_POISON2; ++} ++#endif ++ ++#define DWC_LIST_REMOVE(link) do { \ ++ (link)->next->prev = (link)->prev; \ ++ (link)->prev->next = (link)->next; \ ++} while (0) ++ ++#define DWC_LIST_REMOVE_INIT(link) do { \ ++ DWC_LIST_REMOVE(link); \ ++ DWC_LIST_INIT(link); \ ++} while (0) ++ ++#define DWC_LIST_MOVE_HEAD(list, link) do { \ ++ DWC_LIST_REMOVE(link); \ ++ DWC_LIST_INSERT_HEAD(list, link); \ ++} while (0) ++ ++#define DWC_LIST_MOVE_TAIL(list, link) do { \ ++ DWC_LIST_REMOVE(link); \ ++ DWC_LIST_INSERT_TAIL(list, link); \ ++} while (0) ++ ++#define DWC_LIST_FOREACH(var, list) \ ++ for((var) = DWC_LIST_FIRST(list); \ ++ (var) != DWC_LIST_END(list); \ ++ (var) = DWC_LIST_NEXT(var)) ++ ++#define DWC_LIST_FOREACH_SAFE(var, var2, list) \ ++ for((var) = DWC_LIST_FIRST(list), (var2) = DWC_LIST_NEXT(var); \ ++ (var) != DWC_LIST_END(list); \ ++ (var) = (var2), (var2) = DWC_LIST_NEXT(var2)) ++ ++#define DWC_LIST_FOREACH_REVERSE(var, list) \ ++ for((var) = DWC_LIST_LAST(list); \ ++ (var) != DWC_LIST_END(list); \ ++ (var) = DWC_LIST_PREV(var)) ++ ++/* ++ * Singly-linked List definitions. ++ */ ++#define DWC_SLIST_HEAD(name, type) \ ++struct name { \ ++ struct type *slh_first; /* first element */ \ ++} ++ ++#define DWC_SLIST_HEAD_INITIALIZER(head) \ ++ { NULL } ++ ++#define DWC_SLIST_ENTRY(type) \ ++struct { \ ++ struct type *sle_next; /* next element */ \ ++} ++ ++/* ++ * Singly-linked List access methods. ++ */ ++#define DWC_SLIST_FIRST(head) ((head)->slh_first) ++#define DWC_SLIST_END(head) NULL ++#define DWC_SLIST_EMPTY(head) (SLIST_FIRST(head) == SLIST_END(head)) ++#define DWC_SLIST_NEXT(elm, field) ((elm)->field.sle_next) ++ ++#define DWC_SLIST_FOREACH(var, head, field) \ ++ for((var) = SLIST_FIRST(head); \ ++ (var) != SLIST_END(head); \ ++ (var) = SLIST_NEXT(var, field)) ++ ++#define DWC_SLIST_FOREACH_PREVPTR(var, varp, head, field) \ ++ for((varp) = &SLIST_FIRST((head)); \ ++ ((var) = *(varp)) != SLIST_END(head); \ ++ (varp) = &SLIST_NEXT((var), field)) ++ ++/* ++ * Singly-linked List functions. ++ */ ++#define DWC_SLIST_INIT(head) { \ ++ SLIST_FIRST(head) = SLIST_END(head); \ ++} ++ ++#define DWC_SLIST_INSERT_AFTER(slistelm, elm, field) do { \ ++ (elm)->field.sle_next = (slistelm)->field.sle_next; \ ++ (slistelm)->field.sle_next = (elm); \ ++} while (0) ++ ++#define DWC_SLIST_INSERT_HEAD(head, elm, field) do { \ ++ (elm)->field.sle_next = (head)->slh_first; \ ++ (head)->slh_first = (elm); \ ++} while (0) ++ ++#define DWC_SLIST_REMOVE_NEXT(head, elm, field) do { \ ++ (elm)->field.sle_next = (elm)->field.sle_next->field.sle_next; \ ++} while (0) ++ ++#define DWC_SLIST_REMOVE_HEAD(head, field) do { \ ++ (head)->slh_first = (head)->slh_first->field.sle_next; \ ++} while (0) ++ ++#define DWC_SLIST_REMOVE(head, elm, type, field) do { \ ++ if ((head)->slh_first == (elm)) { \ ++ SLIST_REMOVE_HEAD((head), field); \ ++ } \ ++ else { \ ++ struct type *curelm = (head)->slh_first; \ ++ while( curelm->field.sle_next != (elm) ) \ ++ curelm = curelm->field.sle_next; \ ++ curelm->field.sle_next = \ ++ curelm->field.sle_next->field.sle_next; \ ++ } \ ++} while (0) ++ ++/* ++ * Simple queue definitions. ++ */ ++#define DWC_SIMPLEQ_HEAD(name, type) \ ++struct name { \ ++ struct type *sqh_first; /* first element */ \ ++ struct type **sqh_last; /* addr of last next element */ \ ++} ++ ++#define DWC_SIMPLEQ_HEAD_INITIALIZER(head) \ ++ { NULL, &(head).sqh_first } ++ ++#define DWC_SIMPLEQ_ENTRY(type) \ ++struct { \ ++ struct type *sqe_next; /* next element */ \ ++} ++ ++/* ++ * Simple queue access methods. ++ */ ++#define DWC_SIMPLEQ_FIRST(head) ((head)->sqh_first) ++#define DWC_SIMPLEQ_END(head) NULL ++#define DWC_SIMPLEQ_EMPTY(head) (SIMPLEQ_FIRST(head) == SIMPLEQ_END(head)) ++#define DWC_SIMPLEQ_NEXT(elm, field) ((elm)->field.sqe_next) ++ ++#define DWC_SIMPLEQ_FOREACH(var, head, field) \ ++ for((var) = SIMPLEQ_FIRST(head); \ ++ (var) != SIMPLEQ_END(head); \ ++ (var) = SIMPLEQ_NEXT(var, field)) ++ ++/* ++ * Simple queue functions. ++ */ ++#define DWC_SIMPLEQ_INIT(head) do { \ ++ (head)->sqh_first = NULL; \ ++ (head)->sqh_last = &(head)->sqh_first; \ ++} while (0) ++ ++#define DWC_SIMPLEQ_INSERT_HEAD(head, elm, field) do { \ ++ if (((elm)->field.sqe_next = (head)->sqh_first) == NULL) \ ++ (head)->sqh_last = &(elm)->field.sqe_next; \ ++ (head)->sqh_first = (elm); \ ++} while (0) ++ ++#define DWC_SIMPLEQ_INSERT_TAIL(head, elm, field) do { \ ++ (elm)->field.sqe_next = NULL; \ ++ *(head)->sqh_last = (elm); \ ++ (head)->sqh_last = &(elm)->field.sqe_next; \ ++} while (0) ++ ++#define DWC_SIMPLEQ_INSERT_AFTER(head, listelm, elm, field) do { \ ++ if (((elm)->field.sqe_next = (listelm)->field.sqe_next) == NULL)\ ++ (head)->sqh_last = &(elm)->field.sqe_next; \ ++ (listelm)->field.sqe_next = (elm); \ ++} while (0) ++ ++#define DWC_SIMPLEQ_REMOVE_HEAD(head, field) do { \ ++ if (((head)->sqh_first = (head)->sqh_first->field.sqe_next) == NULL) \ ++ (head)->sqh_last = &(head)->sqh_first; \ ++} while (0) ++ ++/* ++ * Tail queue definitions. ++ */ ++#define DWC_TAILQ_HEAD(name, type) \ ++struct name { \ ++ struct type *tqh_first; /* first element */ \ ++ struct type **tqh_last; /* addr of last next element */ \ ++} ++ ++#define DWC_TAILQ_HEAD_INITIALIZER(head) \ ++ { NULL, &(head).tqh_first } ++ ++#define DWC_TAILQ_ENTRY(type) \ ++struct { \ ++ struct type *tqe_next; /* next element */ \ ++ struct type **tqe_prev; /* address of previous next element */ \ ++} ++ ++/* ++ * tail queue access methods ++ */ ++#define DWC_TAILQ_FIRST(head) ((head)->tqh_first) ++#define DWC_TAILQ_END(head) NULL ++#define DWC_TAILQ_NEXT(elm, field) ((elm)->field.tqe_next) ++#define DWC_TAILQ_LAST(head, headname) \ ++ (*(((struct headname *)((head)->tqh_last))->tqh_last)) ++/* XXX */ ++#define DWC_TAILQ_PREV(elm, headname, field) \ ++ (*(((struct headname *)((elm)->field.tqe_prev))->tqh_last)) ++#define DWC_TAILQ_EMPTY(head) \ ++ (TAILQ_FIRST(head) == TAILQ_END(head)) ++ ++#define DWC_TAILQ_FOREACH(var, head, field) \ ++ for((var) = TAILQ_FIRST(head); \ ++ (var) != TAILQ_END(head); \ ++ (var) = TAILQ_NEXT(var, field)) ++ ++#define DWC_TAILQ_FOREACH_REVERSE(var, head, headname, field) \ ++ for((var) = TAILQ_LAST(head, headname); \ ++ (var) != TAILQ_END(head); \ ++ (var) = TAILQ_PREV(var, headname, field)) ++ ++/* ++ * Tail queue functions. ++ */ ++#define DWC_TAILQ_INIT(head) do { \ ++ (head)->tqh_first = NULL; \ ++ (head)->tqh_last = &(head)->tqh_first; \ ++} while (0) ++ ++#define DWC_TAILQ_INSERT_HEAD(head, elm, field) do { \ ++ if (((elm)->field.tqe_next = (head)->tqh_first) != NULL) \ ++ (head)->tqh_first->field.tqe_prev = \ ++ &(elm)->field.tqe_next; \ ++ else \ ++ (head)->tqh_last = &(elm)->field.tqe_next; \ ++ (head)->tqh_first = (elm); \ ++ (elm)->field.tqe_prev = &(head)->tqh_first; \ ++} while (0) ++ ++#define DWC_TAILQ_INSERT_TAIL(head, elm, field) do { \ ++ (elm)->field.tqe_next = NULL; \ ++ (elm)->field.tqe_prev = (head)->tqh_last; \ ++ *(head)->tqh_last = (elm); \ ++ (head)->tqh_last = &(elm)->field.tqe_next; \ ++} while (0) ++ ++#define DWC_TAILQ_INSERT_AFTER(head, listelm, elm, field) do { \ ++ if (((elm)->field.tqe_next = (listelm)->field.tqe_next) != NULL)\ ++ (elm)->field.tqe_next->field.tqe_prev = \ ++ &(elm)->field.tqe_next; \ ++ else \ ++ (head)->tqh_last = &(elm)->field.tqe_next; \ ++ (listelm)->field.tqe_next = (elm); \ ++ (elm)->field.tqe_prev = &(listelm)->field.tqe_next; \ ++} while (0) ++ ++#define DWC_TAILQ_INSERT_BEFORE(listelm, elm, field) do { \ ++ (elm)->field.tqe_prev = (listelm)->field.tqe_prev; \ ++ (elm)->field.tqe_next = (listelm); \ ++ *(listelm)->field.tqe_prev = (elm); \ ++ (listelm)->field.tqe_prev = &(elm)->field.tqe_next; \ ++} while (0) ++ ++#define DWC_TAILQ_REMOVE(head, elm, field) do { \ ++ if (((elm)->field.tqe_next) != NULL) \ ++ (elm)->field.tqe_next->field.tqe_prev = \ ++ (elm)->field.tqe_prev; \ ++ else \ ++ (head)->tqh_last = (elm)->field.tqe_prev; \ ++ *(elm)->field.tqe_prev = (elm)->field.tqe_next; \ ++} while (0) ++ ++#define DWC_TAILQ_REPLACE(head, elm, elm2, field) do { \ ++ if (((elm2)->field.tqe_next = (elm)->field.tqe_next) != NULL) \ ++ (elm2)->field.tqe_next->field.tqe_prev = \ ++ &(elm2)->field.tqe_next; \ ++ else \ ++ (head)->tqh_last = &(elm2)->field.tqe_next; \ ++ (elm2)->field.tqe_prev = (elm)->field.tqe_prev; \ ++ *(elm2)->field.tqe_prev = (elm2); \ ++} while (0) ++ ++/* ++ * Circular queue definitions. ++ */ ++#define DWC_CIRCLEQ_HEAD(name, type) \ ++struct name { \ ++ struct type *cqh_first; /* first element */ \ ++ struct type *cqh_last; /* last element */ \ ++} ++ ++#define DWC_CIRCLEQ_HEAD_INITIALIZER(head) \ ++ { DWC_CIRCLEQ_END(&head), DWC_CIRCLEQ_END(&head) } ++ ++#define DWC_CIRCLEQ_ENTRY(type) \ ++struct { \ ++ struct type *cqe_next; /* next element */ \ ++ struct type *cqe_prev; /* previous element */ \ ++} ++ ++/* ++ * Circular queue access methods ++ */ ++#define DWC_CIRCLEQ_FIRST(head) ((head)->cqh_first) ++#define DWC_CIRCLEQ_LAST(head) ((head)->cqh_last) ++#define DWC_CIRCLEQ_END(head) ((void *)(head)) ++#define DWC_CIRCLEQ_NEXT(elm, field) ((elm)->field.cqe_next) ++#define DWC_CIRCLEQ_PREV(elm, field) ((elm)->field.cqe_prev) ++#define DWC_CIRCLEQ_EMPTY(head) \ ++ (DWC_CIRCLEQ_FIRST(head) == DWC_CIRCLEQ_END(head)) ++ ++#define DWC_CIRCLEQ_EMPTY_ENTRY(elm, field) (((elm)->field.cqe_next == NULL) && ((elm)->field.cqe_prev == NULL)) ++ ++#define DWC_CIRCLEQ_FOREACH(var, head, field) \ ++ for((var) = DWC_CIRCLEQ_FIRST(head); \ ++ (var) != DWC_CIRCLEQ_END(head); \ ++ (var) = DWC_CIRCLEQ_NEXT(var, field)) ++ ++#define DWC_CIRCLEQ_FOREACH_SAFE(var, var2, head, field) \ ++ for((var) = DWC_CIRCLEQ_FIRST(head), var2 = DWC_CIRCLEQ_NEXT(var, field); \ ++ (var) != DWC_CIRCLEQ_END(head); \ ++ (var) = var2, var2 = DWC_CIRCLEQ_NEXT(var, field)) ++ ++#define DWC_CIRCLEQ_FOREACH_REVERSE(var, head, field) \ ++ for((var) = DWC_CIRCLEQ_LAST(head); \ ++ (var) != DWC_CIRCLEQ_END(head); \ ++ (var) = DWC_CIRCLEQ_PREV(var, field)) ++ ++/* ++ * Circular queue functions. ++ */ ++#define DWC_CIRCLEQ_INIT(head) do { \ ++ (head)->cqh_first = DWC_CIRCLEQ_END(head); \ ++ (head)->cqh_last = DWC_CIRCLEQ_END(head); \ ++} while (0) ++ ++#define DWC_CIRCLEQ_INIT_ENTRY(elm, field) do { \ ++ (elm)->field.cqe_next = NULL; \ ++ (elm)->field.cqe_prev = NULL; \ ++} while (0) ++ ++#define DWC_CIRCLEQ_INSERT_AFTER(head, listelm, elm, field) do { \ ++ (elm)->field.cqe_next = (listelm)->field.cqe_next; \ ++ (elm)->field.cqe_prev = (listelm); \ ++ if ((listelm)->field.cqe_next == DWC_CIRCLEQ_END(head)) \ ++ (head)->cqh_last = (elm); \ ++ else \ ++ (listelm)->field.cqe_next->field.cqe_prev = (elm); \ ++ (listelm)->field.cqe_next = (elm); \ ++} while (0) ++ ++#define DWC_CIRCLEQ_INSERT_BEFORE(head, listelm, elm, field) do { \ ++ (elm)->field.cqe_next = (listelm); \ ++ (elm)->field.cqe_prev = (listelm)->field.cqe_prev; \ ++ if ((listelm)->field.cqe_prev == DWC_CIRCLEQ_END(head)) \ ++ (head)->cqh_first = (elm); \ ++ else \ ++ (listelm)->field.cqe_prev->field.cqe_next = (elm); \ ++ (listelm)->field.cqe_prev = (elm); \ ++} while (0) ++ ++#define DWC_CIRCLEQ_INSERT_HEAD(head, elm, field) do { \ ++ (elm)->field.cqe_next = (head)->cqh_first; \ ++ (elm)->field.cqe_prev = DWC_CIRCLEQ_END(head); \ ++ if ((head)->cqh_last == DWC_CIRCLEQ_END(head)) \ ++ (head)->cqh_last = (elm); \ ++ else \ ++ (head)->cqh_first->field.cqe_prev = (elm); \ ++ (head)->cqh_first = (elm); \ ++} while (0) ++ ++#define DWC_CIRCLEQ_INSERT_TAIL(head, elm, field) do { \ ++ (elm)->field.cqe_next = DWC_CIRCLEQ_END(head); \ ++ (elm)->field.cqe_prev = (head)->cqh_last; \ ++ if ((head)->cqh_first == DWC_CIRCLEQ_END(head)) \ ++ (head)->cqh_first = (elm); \ ++ else \ ++ (head)->cqh_last->field.cqe_next = (elm); \ ++ (head)->cqh_last = (elm); \ ++} while (0) ++ ++#define DWC_CIRCLEQ_REMOVE(head, elm, field) do { \ ++ if ((elm)->field.cqe_next == DWC_CIRCLEQ_END(head)) \ ++ (head)->cqh_last = (elm)->field.cqe_prev; \ ++ else \ ++ (elm)->field.cqe_next->field.cqe_prev = \ ++ (elm)->field.cqe_prev; \ ++ if ((elm)->field.cqe_prev == DWC_CIRCLEQ_END(head)) \ ++ (head)->cqh_first = (elm)->field.cqe_next; \ ++ else \ ++ (elm)->field.cqe_prev->field.cqe_next = \ ++ (elm)->field.cqe_next; \ ++} while (0) ++ ++#define DWC_CIRCLEQ_REMOVE_INIT(head, elm, field) do { \ ++ DWC_CIRCLEQ_REMOVE(head, elm, field); \ ++ DWC_CIRCLEQ_INIT_ENTRY(elm, field); \ ++} while (0) ++ ++#define DWC_CIRCLEQ_REPLACE(head, elm, elm2, field) do { \ ++ if (((elm2)->field.cqe_next = (elm)->field.cqe_next) == \ ++ DWC_CIRCLEQ_END(head)) \ ++ (head).cqh_last = (elm2); \ ++ else \ ++ (elm2)->field.cqe_next->field.cqe_prev = (elm2); \ ++ if (((elm2)->field.cqe_prev = (elm)->field.cqe_prev) == \ ++ DWC_CIRCLEQ_END(head)) \ ++ (head).cqh_first = (elm2); \ ++ else \ ++ (elm2)->field.cqe_prev->field.cqe_next = (elm2); \ ++} while (0) ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* _DWC_LIST_H_ */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_mem.c +@@ -0,0 +1,245 @@ ++/* Memory Debugging */ ++#ifdef DWC_DEBUG_MEMORY ++ ++#include "dwc_os.h" ++#include "dwc_list.h" ++ ++struct allocation { ++ void *addr; ++ void *ctx; ++ char *func; ++ int line; ++ uint32_t size; ++ int dma; ++ DWC_CIRCLEQ_ENTRY(allocation) entry; ++}; ++ ++DWC_CIRCLEQ_HEAD(allocation_queue, allocation); ++ ++struct allocation_manager { ++ void *mem_ctx; ++ struct allocation_queue allocations; ++ ++ /* statistics */ ++ int num; ++ int num_freed; ++ int num_active; ++ uint32_t total; ++ uint32_t cur; ++ uint32_t max; ++}; ++ ++static struct allocation_manager *manager = NULL; ++ ++static int add_allocation(void *ctx, uint32_t size, char const *func, int line, void *addr, ++ int dma) ++{ ++ struct allocation *a; ++ ++ DWC_ASSERT(manager != NULL, "manager not allocated"); ++ ++ a = __DWC_ALLOC_ATOMIC(manager->mem_ctx, sizeof(*a)); ++ if (!a) { ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ a->func = __DWC_ALLOC_ATOMIC(manager->mem_ctx, DWC_STRLEN(func) + 1); ++ if (!a->func) { ++ __DWC_FREE(manager->mem_ctx, a); ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ DWC_MEMCPY(a->func, func, DWC_STRLEN(func) + 1); ++ a->addr = addr; ++ a->ctx = ctx; ++ a->line = line; ++ a->size = size; ++ a->dma = dma; ++ DWC_CIRCLEQ_INSERT_TAIL(&manager->allocations, a, entry); ++ ++ /* Update stats */ ++ manager->num++; ++ manager->num_active++; ++ manager->total += size; ++ manager->cur += size; ++ ++ if (manager->max < manager->cur) { ++ manager->max = manager->cur; ++ } ++ ++ return 0; ++} ++ ++static struct allocation *find_allocation(void *ctx, void *addr) ++{ ++ struct allocation *a; ++ ++ DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) { ++ if (a->ctx == ctx && a->addr == addr) { ++ return a; ++ } ++ } ++ ++ return NULL; ++} ++ ++static void free_allocation(void *ctx, void *addr, char const *func, int line) ++{ ++ struct allocation *a = find_allocation(ctx, addr); ++ ++ if (!a) { ++ DWC_ASSERT(0, ++ "Free of address %p that was never allocated or already freed %s:%d", ++ addr, func, line); ++ return; ++ } ++ ++ DWC_CIRCLEQ_REMOVE(&manager->allocations, a, entry); ++ ++ manager->num_active--; ++ manager->num_freed++; ++ manager->cur -= a->size; ++ __DWC_FREE(manager->mem_ctx, a->func); ++ __DWC_FREE(manager->mem_ctx, a); ++} ++ ++int dwc_memory_debug_start(void *mem_ctx) ++{ ++ DWC_ASSERT(manager == NULL, "Memory debugging has already started\n"); ++ ++ if (manager) { ++ return -DWC_E_BUSY; ++ } ++ ++ manager = __DWC_ALLOC(mem_ctx, sizeof(*manager)); ++ if (!manager) { ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ DWC_CIRCLEQ_INIT(&manager->allocations); ++ manager->mem_ctx = mem_ctx; ++ manager->num = 0; ++ manager->num_freed = 0; ++ manager->num_active = 0; ++ manager->total = 0; ++ manager->cur = 0; ++ manager->max = 0; ++ ++ return 0; ++} ++ ++void dwc_memory_debug_stop(void) ++{ ++ struct allocation *a; ++ ++ dwc_memory_debug_report(); ++ ++ DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) { ++ DWC_ERROR("Memory leaked from %s:%d\n", a->func, a->line); ++ free_allocation(a->ctx, a->addr, NULL, -1); ++ } ++ ++ __DWC_FREE(manager->mem_ctx, manager); ++} ++ ++void dwc_memory_debug_report(void) ++{ ++ struct allocation *a; ++ ++ DWC_PRINTF("\n\n\n----------------- Memory Debugging Report -----------------\n\n"); ++ DWC_PRINTF("Num Allocations = %d\n", manager->num); ++ DWC_PRINTF("Freed = %d\n", manager->num_freed); ++ DWC_PRINTF("Active = %d\n", manager->num_active); ++ DWC_PRINTF("Current Memory Used = %d\n", manager->cur); ++ DWC_PRINTF("Total Memory Used = %d\n", manager->total); ++ DWC_PRINTF("Maximum Memory Used at Once = %d\n", manager->max); ++ DWC_PRINTF("Unfreed allocations:\n"); ++ ++ DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) { ++ DWC_PRINTF(" addr=%p, size=%d from %s:%d, DMA=%d\n", ++ a->addr, a->size, a->func, a->line, a->dma); ++ } ++} ++ ++/* The replacement functions */ ++void *dwc_alloc_debug(void *mem_ctx, uint32_t size, char const *func, int line) ++{ ++ void *addr = __DWC_ALLOC(mem_ctx, size); ++ ++ if (!addr) { ++ return NULL; ++ } ++ ++ if (add_allocation(mem_ctx, size, func, line, addr, 0)) { ++ __DWC_FREE(mem_ctx, addr); ++ return NULL; ++ } ++ ++ return addr; ++} ++ ++void *dwc_alloc_atomic_debug(void *mem_ctx, uint32_t size, char const *func, ++ int line) ++{ ++ void *addr = __DWC_ALLOC_ATOMIC(mem_ctx, size); ++ ++ if (!addr) { ++ return NULL; ++ } ++ ++ if (add_allocation(mem_ctx, size, func, line, addr, 0)) { ++ __DWC_FREE(mem_ctx, addr); ++ return NULL; ++ } ++ ++ return addr; ++} ++ ++void dwc_free_debug(void *mem_ctx, void *addr, char const *func, int line) ++{ ++ free_allocation(mem_ctx, addr, func, line); ++ __DWC_FREE(mem_ctx, addr); ++} ++ ++void *dwc_dma_alloc_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr, ++ char const *func, int line) ++{ ++ void *addr = __DWC_DMA_ALLOC(dma_ctx, size, dma_addr); ++ ++ if (!addr) { ++ return NULL; ++ } ++ ++ if (add_allocation(dma_ctx, size, func, line, addr, 1)) { ++ __DWC_DMA_FREE(dma_ctx, size, addr, *dma_addr); ++ return NULL; ++ } ++ ++ return addr; ++} ++ ++void *dwc_dma_alloc_atomic_debug(void *dma_ctx, uint32_t size, ++ dwc_dma_t *dma_addr, char const *func, int line) ++{ ++ void *addr = __DWC_DMA_ALLOC_ATOMIC(dma_ctx, size, dma_addr); ++ ++ if (!addr) { ++ return NULL; ++ } ++ ++ if (add_allocation(dma_ctx, size, func, line, addr, 1)) { ++ __DWC_DMA_FREE(dma_ctx, size, addr, *dma_addr); ++ return NULL; ++ } ++ ++ return addr; ++} ++ ++void dwc_dma_free_debug(void *dma_ctx, uint32_t size, void *virt_addr, ++ dwc_dma_t dma_addr, char const *func, int line) ++{ ++ free_allocation(dma_ctx, virt_addr, func, line); ++ __DWC_DMA_FREE(dma_ctx, size, virt_addr, dma_addr); ++} ++ ++#endif /* DWC_DEBUG_MEMORY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_modpow.c +@@ -0,0 +1,636 @@ ++/* Bignum routines adapted from PUTTY sources. PuTTY copyright notice follows. ++ * ++ * PuTTY is copyright 1997-2007 Simon Tatham. ++ * ++ * Portions copyright Robert de Bath, Joris van Rantwijk, Delian ++ * Delchev, Andreas Schultz, Jeroen Massar, Wez Furlong, Nicolas Barry, ++ * Justin Bradford, Ben Harris, Malcolm Smith, Ahmad Khalifa, Markus ++ * Kuhn, and CORE SDI S.A. ++ * ++ * Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation files ++ * (the "Software"), to deal in the Software without restriction, ++ * including without limitation the rights to use, copy, modify, merge, ++ * publish, distribute, sublicense, and/or sell copies of the Software, ++ * and to permit persons to whom the Software is furnished to do so, ++ * subject to the following conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF ++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE ++ * FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF ++ * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION ++ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. ++ * ++ */ ++#ifdef DWC_CRYPTOLIB ++ ++#ifndef CONFIG_MACH_IPMATE ++ ++#include "dwc_modpow.h" ++ ++#define BIGNUM_INT_MASK 0xFFFFFFFFUL ++#define BIGNUM_TOP_BIT 0x80000000UL ++#define BIGNUM_INT_BITS 32 ++ ++ ++static void *snmalloc(void *mem_ctx, size_t n, size_t size) ++{ ++ void *p; ++ size *= n; ++ if (size == 0) size = 1; ++ p = dwc_alloc(mem_ctx, size); ++ return p; ++} ++ ++#define snewn(ctx, n, type) ((type *)snmalloc((ctx), (n), sizeof(type))) ++#define sfree dwc_free ++ ++/* ++ * Usage notes: ++ * * Do not call the DIVMOD_WORD macro with expressions such as array ++ * subscripts, as some implementations object to this (see below). ++ * * Note that none of the division methods below will cope if the ++ * quotient won't fit into BIGNUM_INT_BITS. Callers should be careful ++ * to avoid this case. ++ * If this condition occurs, in the case of the x86 DIV instruction, ++ * an overflow exception will occur, which (according to a correspondent) ++ * will manifest on Windows as something like ++ * 0xC0000095: Integer overflow ++ * The C variant won't give the right answer, either. ++ */ ++ ++#define MUL_WORD(w1, w2) ((BignumDblInt)w1 * w2) ++ ++#if defined __GNUC__ && defined __i386__ ++#define DIVMOD_WORD(q, r, hi, lo, w) \ ++ __asm__("div %2" : \ ++ "=d" (r), "=a" (q) : \ ++ "r" (w), "d" (hi), "a" (lo)) ++#else ++#define DIVMOD_WORD(q, r, hi, lo, w) do { \ ++ BignumDblInt n = (((BignumDblInt)hi) << BIGNUM_INT_BITS) | lo; \ ++ q = n / w; \ ++ r = n % w; \ ++} while (0) ++#endif ++ ++// q = n / w; ++// r = n % w; ++ ++#define BIGNUM_INT_BYTES (BIGNUM_INT_BITS / 8) ++ ++#define BIGNUM_INTERNAL ++ ++static Bignum newbn(void *mem_ctx, int length) ++{ ++ Bignum b = snewn(mem_ctx, length + 1, BignumInt); ++ //if (!b) ++ //abort(); /* FIXME */ ++ DWC_MEMSET(b, 0, (length + 1) * sizeof(*b)); ++ b[0] = length; ++ return b; ++} ++ ++void freebn(void *mem_ctx, Bignum b) ++{ ++ /* ++ * Burn the evidence, just in case. ++ */ ++ DWC_MEMSET(b, 0, sizeof(b[0]) * (b[0] + 1)); ++ sfree(mem_ctx, b); ++} ++ ++/* ++ * Compute c = a * b. ++ * Input is in the first len words of a and b. ++ * Result is returned in the first 2*len words of c. ++ */ ++static void internal_mul(BignumInt *a, BignumInt *b, ++ BignumInt *c, int len) ++{ ++ int i, j; ++ BignumDblInt t; ++ ++ for (j = 0; j < 2 * len; j++) ++ c[j] = 0; ++ ++ for (i = len - 1; i >= 0; i--) { ++ t = 0; ++ for (j = len - 1; j >= 0; j--) { ++ t += MUL_WORD(a[i], (BignumDblInt) b[j]); ++ t += (BignumDblInt) c[i + j + 1]; ++ c[i + j + 1] = (BignumInt) t; ++ t = t >> BIGNUM_INT_BITS; ++ } ++ c[i] = (BignumInt) t; ++ } ++} ++ ++static void internal_add_shifted(BignumInt *number, ++ unsigned n, int shift) ++{ ++ int word = 1 + (shift / BIGNUM_INT_BITS); ++ int bshift = shift % BIGNUM_INT_BITS; ++ BignumDblInt addend; ++ ++ addend = (BignumDblInt)n << bshift; ++ ++ while (addend) { ++ addend += number[word]; ++ number[word] = (BignumInt) addend & BIGNUM_INT_MASK; ++ addend >>= BIGNUM_INT_BITS; ++ word++; ++ } ++} ++ ++/* ++ * Compute a = a % m. ++ * Input in first alen words of a and first mlen words of m. ++ * Output in first alen words of a ++ * (of which first alen-mlen words will be zero). ++ * The MSW of m MUST have its high bit set. ++ * Quotient is accumulated in the `quotient' array, which is a Bignum ++ * rather than the internal bigendian format. Quotient parts are shifted ++ * left by `qshift' before adding into quot. ++ */ ++static void internal_mod(BignumInt *a, int alen, ++ BignumInt *m, int mlen, ++ BignumInt *quot, int qshift) ++{ ++ BignumInt m0, m1; ++ unsigned int h; ++ int i, k; ++ ++ m0 = m[0]; ++ if (mlen > 1) ++ m1 = m[1]; ++ else ++ m1 = 0; ++ ++ for (i = 0; i <= alen - mlen; i++) { ++ BignumDblInt t; ++ unsigned int q, r, c, ai1; ++ ++ if (i == 0) { ++ h = 0; ++ } else { ++ h = a[i - 1]; ++ a[i - 1] = 0; ++ } ++ ++ if (i == alen - 1) ++ ai1 = 0; ++ else ++ ai1 = a[i + 1]; ++ ++ /* Find q = h:a[i] / m0 */ ++ if (h >= m0) { ++ /* ++ * Special case. ++ * ++ * To illustrate it, suppose a BignumInt is 8 bits, and ++ * we are dividing (say) A1:23:45:67 by A1:B2:C3. Then ++ * our initial division will be 0xA123 / 0xA1, which ++ * will give a quotient of 0x100 and a divide overflow. ++ * However, the invariants in this division algorithm ++ * are not violated, since the full number A1:23:... is ++ * _less_ than the quotient prefix A1:B2:... and so the ++ * following correction loop would have sorted it out. ++ * ++ * In this situation we set q to be the largest ++ * quotient we _can_ stomach (0xFF, of course). ++ */ ++ q = BIGNUM_INT_MASK; ++ } else { ++ /* Macro doesn't want an array subscript expression passed ++ * into it (see definition), so use a temporary. */ ++ BignumInt tmplo = a[i]; ++ DIVMOD_WORD(q, r, h, tmplo, m0); ++ ++ /* Refine our estimate of q by looking at ++ h:a[i]:a[i+1] / m0:m1 */ ++ t = MUL_WORD(m1, q); ++ if (t > ((BignumDblInt) r << BIGNUM_INT_BITS) + ai1) { ++ q--; ++ t -= m1; ++ r = (r + m0) & BIGNUM_INT_MASK; /* overflow? */ ++ if (r >= (BignumDblInt) m0 && ++ t > ((BignumDblInt) r << BIGNUM_INT_BITS) + ai1) q--; ++ } ++ } ++ ++ /* Subtract q * m from a[i...] */ ++ c = 0; ++ for (k = mlen - 1; k >= 0; k--) { ++ t = MUL_WORD(q, m[k]); ++ t += c; ++ c = (unsigned)(t >> BIGNUM_INT_BITS); ++ if ((BignumInt) t > a[i + k]) ++ c++; ++ a[i + k] -= (BignumInt) t; ++ } ++ ++ /* Add back m in case of borrow */ ++ if (c != h) { ++ t = 0; ++ for (k = mlen - 1; k >= 0; k--) { ++ t += m[k]; ++ t += a[i + k]; ++ a[i + k] = (BignumInt) t; ++ t = t >> BIGNUM_INT_BITS; ++ } ++ q--; ++ } ++ if (quot) ++ internal_add_shifted(quot, q, qshift + BIGNUM_INT_BITS * (alen - mlen - i)); ++ } ++} ++ ++/* ++ * Compute p % mod. ++ * The most significant word of mod MUST be non-zero. ++ * We assume that the result array is the same size as the mod array. ++ * We optionally write out a quotient if `quotient' is non-NULL. ++ * We can avoid writing out the result if `result' is NULL. ++ */ ++void bigdivmod(void *mem_ctx, Bignum p, Bignum mod, Bignum result, Bignum quotient) ++{ ++ BignumInt *n, *m; ++ int mshift; ++ int plen, mlen, i, j; ++ ++ /* Allocate m of size mlen, copy mod to m */ ++ /* We use big endian internally */ ++ mlen = mod[0]; ++ m = snewn(mem_ctx, mlen, BignumInt); ++ //if (!m) ++ //abort(); /* FIXME */ ++ for (j = 0; j < mlen; j++) ++ m[j] = mod[mod[0] - j]; ++ ++ /* Shift m left to make msb bit set */ ++ for (mshift = 0; mshift < BIGNUM_INT_BITS-1; mshift++) ++ if ((m[0] << mshift) & BIGNUM_TOP_BIT) ++ break; ++ if (mshift) { ++ for (i = 0; i < mlen - 1; i++) ++ m[i] = (m[i] << mshift) | (m[i + 1] >> (BIGNUM_INT_BITS - mshift)); ++ m[mlen - 1] = m[mlen - 1] << mshift; ++ } ++ ++ plen = p[0]; ++ /* Ensure plen > mlen */ ++ if (plen <= mlen) ++ plen = mlen + 1; ++ ++ /* Allocate n of size plen, copy p to n */ ++ n = snewn(mem_ctx, plen, BignumInt); ++ //if (!n) ++ //abort(); /* FIXME */ ++ for (j = 0; j < plen; j++) ++ n[j] = 0; ++ for (j = 1; j <= (int)p[0]; j++) ++ n[plen - j] = p[j]; ++ ++ /* Main computation */ ++ internal_mod(n, plen, m, mlen, quotient, mshift); ++ ++ /* Fixup result in case the modulus was shifted */ ++ if (mshift) { ++ for (i = plen - mlen - 1; i < plen - 1; i++) ++ n[i] = (n[i] << mshift) | (n[i + 1] >> (BIGNUM_INT_BITS - mshift)); ++ n[plen - 1] = n[plen - 1] << mshift; ++ internal_mod(n, plen, m, mlen, quotient, 0); ++ for (i = plen - 1; i >= plen - mlen; i--) ++ n[i] = (n[i] >> mshift) | (n[i - 1] << (BIGNUM_INT_BITS - mshift)); ++ } ++ ++ /* Copy result to buffer */ ++ if (result) { ++ for (i = 1; i <= (int)result[0]; i++) { ++ int j = plen - i; ++ result[i] = j >= 0 ? n[j] : 0; ++ } ++ } ++ ++ /* Free temporary arrays */ ++ for (i = 0; i < mlen; i++) ++ m[i] = 0; ++ sfree(mem_ctx, m); ++ for (i = 0; i < plen; i++) ++ n[i] = 0; ++ sfree(mem_ctx, n); ++} ++ ++/* ++ * Simple remainder. ++ */ ++Bignum bigmod(void *mem_ctx, Bignum a, Bignum b) ++{ ++ Bignum r = newbn(mem_ctx, b[0]); ++ bigdivmod(mem_ctx, a, b, r, NULL); ++ return r; ++} ++ ++/* ++ * Compute (base ^ exp) % mod. ++ */ ++Bignum dwc_modpow(void *mem_ctx, Bignum base_in, Bignum exp, Bignum mod) ++{ ++ BignumInt *a, *b, *n, *m; ++ int mshift; ++ int mlen, i, j; ++ Bignum base, result; ++ ++ /* ++ * The most significant word of mod needs to be non-zero. It ++ * should already be, but let's make sure. ++ */ ++ //assert(mod[mod[0]] != 0); ++ ++ /* ++ * Make sure the base is smaller than the modulus, by reducing ++ * it modulo the modulus if not. ++ */ ++ base = bigmod(mem_ctx, base_in, mod); ++ ++ /* Allocate m of size mlen, copy mod to m */ ++ /* We use big endian internally */ ++ mlen = mod[0]; ++ m = snewn(mem_ctx, mlen, BignumInt); ++ //if (!m) ++ //abort(); /* FIXME */ ++ for (j = 0; j < mlen; j++) ++ m[j] = mod[mod[0] - j]; ++ ++ /* Shift m left to make msb bit set */ ++ for (mshift = 0; mshift < BIGNUM_INT_BITS - 1; mshift++) ++ if ((m[0] << mshift) & BIGNUM_TOP_BIT) ++ break; ++ if (mshift) { ++ for (i = 0; i < mlen - 1; i++) ++ m[i] = ++ (m[i] << mshift) | (m[i + 1] >> ++ (BIGNUM_INT_BITS - mshift)); ++ m[mlen - 1] = m[mlen - 1] << mshift; ++ } ++ ++ /* Allocate n of size mlen, copy base to n */ ++ n = snewn(mem_ctx, mlen, BignumInt); ++ //if (!n) ++ //abort(); /* FIXME */ ++ i = mlen - base[0]; ++ for (j = 0; j < i; j++) ++ n[j] = 0; ++ for (j = 0; j < base[0]; j++) ++ n[i + j] = base[base[0] - j]; ++ ++ /* Allocate a and b of size 2*mlen. Set a = 1 */ ++ a = snewn(mem_ctx, 2 * mlen, BignumInt); ++ //if (!a) ++ //abort(); /* FIXME */ ++ b = snewn(mem_ctx, 2 * mlen, BignumInt); ++ //if (!b) ++ //abort(); /* FIXME */ ++ for (i = 0; i < 2 * mlen; i++) ++ a[i] = 0; ++ a[2 * mlen - 1] = 1; ++ ++ /* Skip leading zero bits of exp. */ ++ i = 0; ++ j = BIGNUM_INT_BITS - 1; ++ while (i < exp[0] && (exp[exp[0] - i] & (1 << j)) == 0) { ++ j--; ++ if (j < 0) { ++ i++; ++ j = BIGNUM_INT_BITS - 1; ++ } ++ } ++ ++ /* Main computation */ ++ while (i < exp[0]) { ++ while (j >= 0) { ++ internal_mul(a + mlen, a + mlen, b, mlen); ++ internal_mod(b, mlen * 2, m, mlen, NULL, 0); ++ if ((exp[exp[0] - i] & (1 << j)) != 0) { ++ internal_mul(b + mlen, n, a, mlen); ++ internal_mod(a, mlen * 2, m, mlen, NULL, 0); ++ } else { ++ BignumInt *t; ++ t = a; ++ a = b; ++ b = t; ++ } ++ j--; ++ } ++ i++; ++ j = BIGNUM_INT_BITS - 1; ++ } ++ ++ /* Fixup result in case the modulus was shifted */ ++ if (mshift) { ++ for (i = mlen - 1; i < 2 * mlen - 1; i++) ++ a[i] = ++ (a[i] << mshift) | (a[i + 1] >> ++ (BIGNUM_INT_BITS - mshift)); ++ a[2 * mlen - 1] = a[2 * mlen - 1] << mshift; ++ internal_mod(a, mlen * 2, m, mlen, NULL, 0); ++ for (i = 2 * mlen - 1; i >= mlen; i--) ++ a[i] = ++ (a[i] >> mshift) | (a[i - 1] << ++ (BIGNUM_INT_BITS - mshift)); ++ } ++ ++ /* Copy result to buffer */ ++ result = newbn(mem_ctx, mod[0]); ++ for (i = 0; i < mlen; i++) ++ result[result[0] - i] = a[i + mlen]; ++ while (result[0] > 1 && result[result[0]] == 0) ++ result[0]--; ++ ++ /* Free temporary arrays */ ++ for (i = 0; i < 2 * mlen; i++) ++ a[i] = 0; ++ sfree(mem_ctx, a); ++ for (i = 0; i < 2 * mlen; i++) ++ b[i] = 0; ++ sfree(mem_ctx, b); ++ for (i = 0; i < mlen; i++) ++ m[i] = 0; ++ sfree(mem_ctx, m); ++ for (i = 0; i < mlen; i++) ++ n[i] = 0; ++ sfree(mem_ctx, n); ++ ++ freebn(mem_ctx, base); ++ ++ return result; ++} ++ ++ ++#ifdef UNITTEST ++ ++static __u32 dh_p[] = { ++ 96, ++ 0xFFFFFFFF, ++ 0xFFFFFFFF, ++ 0xA93AD2CA, ++ 0x4B82D120, ++ 0xE0FD108E, ++ 0x43DB5BFC, ++ 0x74E5AB31, ++ 0x08E24FA0, ++ 0xBAD946E2, ++ 0x770988C0, ++ 0x7A615D6C, ++ 0xBBE11757, ++ 0x177B200C, ++ 0x521F2B18, ++ 0x3EC86A64, ++ 0xD8760273, ++ 0xD98A0864, ++ 0xF12FFA06, ++ 0x1AD2EE6B, ++ 0xCEE3D226, ++ 0x4A25619D, ++ 0x1E8C94E0, ++ 0xDB0933D7, ++ 0xABF5AE8C, ++ 0xA6E1E4C7, ++ 0xB3970F85, ++ 0x5D060C7D, ++ 0x8AEA7157, ++ 0x58DBEF0A, ++ 0xECFB8504, ++ 0xDF1CBA64, ++ 0xA85521AB, ++ 0x04507A33, ++ 0xAD33170D, ++ 0x8AAAC42D, ++ 0x15728E5A, ++ 0x98FA0510, ++ 0x15D22618, ++ 0xEA956AE5, ++ 0x3995497C, ++ 0x95581718, ++ 0xDE2BCBF6, ++ 0x6F4C52C9, ++ 0xB5C55DF0, ++ 0xEC07A28F, ++ 0x9B2783A2, ++ 0x180E8603, ++ 0xE39E772C, ++ 0x2E36CE3B, ++ 0x32905E46, ++ 0xCA18217C, ++ 0xF1746C08, ++ 0x4ABC9804, ++ 0x670C354E, ++ 0x7096966D, ++ 0x9ED52907, ++ 0x208552BB, ++ 0x1C62F356, ++ 0xDCA3AD96, ++ 0x83655D23, ++ 0xFD24CF5F, ++ 0x69163FA8, ++ 0x1C55D39A, ++ 0x98DA4836, ++ 0xA163BF05, ++ 0xC2007CB8, ++ 0xECE45B3D, ++ 0x49286651, ++ 0x7C4B1FE6, ++ 0xAE9F2411, ++ 0x5A899FA5, ++ 0xEE386BFB, ++ 0xF406B7ED, ++ 0x0BFF5CB6, ++ 0xA637ED6B, ++ 0xF44C42E9, ++ 0x625E7EC6, ++ 0xE485B576, ++ 0x6D51C245, ++ 0x4FE1356D, ++ 0xF25F1437, ++ 0x302B0A6D, ++ 0xCD3A431B, ++ 0xEF9519B3, ++ 0x8E3404DD, ++ 0x514A0879, ++ 0x3B139B22, ++ 0x020BBEA6, ++ 0x8A67CC74, ++ 0x29024E08, ++ 0x80DC1CD1, ++ 0xC4C6628B, ++ 0x2168C234, ++ 0xC90FDAA2, ++ 0xFFFFFFFF, ++ 0xFFFFFFFF, ++}; ++ ++static __u32 dh_a[] = { ++ 8, ++ 0xdf367516, ++ 0x86459caa, ++ 0xe2d459a4, ++ 0xd910dae0, ++ 0x8a8b5e37, ++ 0x67ab31c6, ++ 0xf0b55ea9, ++ 0x440051d6, ++}; ++ ++static __u32 dh_b[] = { ++ 8, ++ 0xded92656, ++ 0xe07a048a, ++ 0x6fa452cd, ++ 0x2df89d30, ++ 0xc75f1b0f, ++ 0x8ce3578f, ++ 0x7980a324, ++ 0x5daec786, ++}; ++ ++static __u32 dh_g[] = { ++ 1, ++ 2, ++}; ++ ++int main(void) ++{ ++ int i; ++ __u32 *k; ++ k = dwc_modpow(NULL, dh_g, dh_a, dh_p); ++ ++ printf("\n\n"); ++ for (i=0; i<k[0]; i++) { ++ __u32 word32 = k[k[0] - i]; ++ __u16 l = word32 & 0xffff; ++ __u16 m = (word32 & 0xffff0000) >> 16; ++ printf("%04x %04x ", m, l); ++ if (!((i + 1)%13)) printf("\n"); ++ } ++ printf("\n\n"); ++ ++ if ((k[0] == 0x60) && (k[1] == 0x28e490e5) && (k[0x60] == 0x5a0d3d4e)) { ++ printf("PASS\n\n"); ++ } ++ else { ++ printf("FAIL\n\n"); ++ } ++ ++} ++ ++#endif /* UNITTEST */ ++ ++#endif /* CONFIG_MACH_IPMATE */ ++ ++#endif /*DWC_CRYPTOLIB */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_modpow.h +@@ -0,0 +1,34 @@ ++/* ++ * dwc_modpow.h ++ * See dwc_modpow.c for license and changes ++ */ ++#ifndef _DWC_MODPOW_H ++#define _DWC_MODPOW_H ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "dwc_os.h" ++ ++/** @file ++ * ++ * This file defines the module exponentiation function which is only used ++ * internally by the DWC UWB modules for calculation of PKs during numeric ++ * association. The routine is taken from the PUTTY, an open source terminal ++ * emulator. The PUTTY License is preserved in the dwc_modpow.c file. ++ * ++ */ ++ ++typedef uint32_t BignumInt; ++typedef uint64_t BignumDblInt; ++typedef BignumInt *Bignum; ++ ++/* Compute modular exponentiaion */ ++extern Bignum dwc_modpow(void *mem_ctx, Bignum base_in, Bignum exp, Bignum mod); ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* _LINUX_BIGNUM_H */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_notifier.c +@@ -0,0 +1,319 @@ ++#ifdef DWC_NOTIFYLIB ++ ++#include "dwc_notifier.h" ++#include "dwc_list.h" ++ ++typedef struct dwc_observer { ++ void *observer; ++ dwc_notifier_callback_t callback; ++ void *data; ++ char *notification; ++ DWC_CIRCLEQ_ENTRY(dwc_observer) list_entry; ++} observer_t; ++ ++DWC_CIRCLEQ_HEAD(observer_queue, dwc_observer); ++ ++typedef struct dwc_notifier { ++ void *mem_ctx; ++ void *object; ++ struct observer_queue observers; ++ DWC_CIRCLEQ_ENTRY(dwc_notifier) list_entry; ++} notifier_t; ++ ++DWC_CIRCLEQ_HEAD(notifier_queue, dwc_notifier); ++ ++typedef struct manager { ++ void *mem_ctx; ++ void *wkq_ctx; ++ dwc_workq_t *wq; ++// dwc_mutex_t *mutex; ++ struct notifier_queue notifiers; ++} manager_t; ++ ++static manager_t *manager = NULL; ++ ++static int create_manager(void *mem_ctx, void *wkq_ctx) ++{ ++ manager = dwc_alloc(mem_ctx, sizeof(manager_t)); ++ if (!manager) { ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ DWC_CIRCLEQ_INIT(&manager->notifiers); ++ ++ manager->wq = dwc_workq_alloc(wkq_ctx, "DWC Notification WorkQ"); ++ if (!manager->wq) { ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ return 0; ++} ++ ++static void free_manager(void) ++{ ++ dwc_workq_free(manager->wq); ++ ++ /* All notifiers must have unregistered themselves before this module ++ * can be removed. Hitting this assertion indicates a programmer ++ * error. */ ++ DWC_ASSERT(DWC_CIRCLEQ_EMPTY(&manager->notifiers), ++ "Notification manager being freed before all notifiers have been removed"); ++ dwc_free(manager->mem_ctx, manager); ++} ++ ++#ifdef DEBUG ++static void dump_manager(void) ++{ ++ notifier_t *n; ++ observer_t *o; ++ ++ DWC_ASSERT(manager, "Notification manager not found"); ++ ++ DWC_DEBUG("List of all notifiers and observers:\n"); ++ DWC_CIRCLEQ_FOREACH(n, &manager->notifiers, list_entry) { ++ DWC_DEBUG("Notifier %p has observers:\n", n->object); ++ DWC_CIRCLEQ_FOREACH(o, &n->observers, list_entry) { ++ DWC_DEBUG(" %p watching %s\n", o->observer, o->notification); ++ } ++ } ++} ++#else ++#define dump_manager(...) ++#endif ++ ++static observer_t *alloc_observer(void *mem_ctx, void *observer, char *notification, ++ dwc_notifier_callback_t callback, void *data) ++{ ++ observer_t *new_observer = dwc_alloc(mem_ctx, sizeof(observer_t)); ++ ++ if (!new_observer) { ++ return NULL; ++ } ++ ++ DWC_CIRCLEQ_INIT_ENTRY(new_observer, list_entry); ++ new_observer->observer = observer; ++ new_observer->notification = notification; ++ new_observer->callback = callback; ++ new_observer->data = data; ++ return new_observer; ++} ++ ++static void free_observer(void *mem_ctx, observer_t *observer) ++{ ++ dwc_free(mem_ctx, observer); ++} ++ ++static notifier_t *alloc_notifier(void *mem_ctx, void *object) ++{ ++ notifier_t *notifier; ++ ++ if (!object) { ++ return NULL; ++ } ++ ++ notifier = dwc_alloc(mem_ctx, sizeof(notifier_t)); ++ if (!notifier) { ++ return NULL; ++ } ++ ++ DWC_CIRCLEQ_INIT(¬ifier->observers); ++ DWC_CIRCLEQ_INIT_ENTRY(notifier, list_entry); ++ ++ notifier->mem_ctx = mem_ctx; ++ notifier->object = object; ++ return notifier; ++} ++ ++static void free_notifier(notifier_t *notifier) ++{ ++ observer_t *observer; ++ ++ DWC_CIRCLEQ_FOREACH(observer, ¬ifier->observers, list_entry) { ++ free_observer(notifier->mem_ctx, observer); ++ } ++ ++ dwc_free(notifier->mem_ctx, notifier); ++} ++ ++static notifier_t *find_notifier(void *object) ++{ ++ notifier_t *notifier; ++ ++ DWC_ASSERT(manager, "Notification manager not found"); ++ ++ if (!object) { ++ return NULL; ++ } ++ ++ DWC_CIRCLEQ_FOREACH(notifier, &manager->notifiers, list_entry) { ++ if (notifier->object == object) { ++ return notifier; ++ } ++ } ++ ++ return NULL; ++} ++ ++int dwc_alloc_notification_manager(void *mem_ctx, void *wkq_ctx) ++{ ++ return create_manager(mem_ctx, wkq_ctx); ++} ++ ++void dwc_free_notification_manager(void) ++{ ++ free_manager(); ++} ++ ++dwc_notifier_t *dwc_register_notifier(void *mem_ctx, void *object) ++{ ++ notifier_t *notifier; ++ ++ DWC_ASSERT(manager, "Notification manager not found"); ++ ++ notifier = find_notifier(object); ++ if (notifier) { ++ DWC_ERROR("Notifier %p is already registered\n", object); ++ return NULL; ++ } ++ ++ notifier = alloc_notifier(mem_ctx, object); ++ if (!notifier) { ++ return NULL; ++ } ++ ++ DWC_CIRCLEQ_INSERT_TAIL(&manager->notifiers, notifier, list_entry); ++ ++ DWC_INFO("Notifier %p registered", object); ++ dump_manager(); ++ ++ return notifier; ++} ++ ++void dwc_unregister_notifier(dwc_notifier_t *notifier) ++{ ++ DWC_ASSERT(manager, "Notification manager not found"); ++ ++ if (!DWC_CIRCLEQ_EMPTY(¬ifier->observers)) { ++ observer_t *o; ++ ++ DWC_ERROR("Notifier %p has active observers when removing\n", notifier->object); ++ DWC_CIRCLEQ_FOREACH(o, ¬ifier->observers, list_entry) { ++ DWC_DEBUGC(" %p watching %s\n", o->observer, o->notification); ++ } ++ ++ DWC_ASSERT(DWC_CIRCLEQ_EMPTY(¬ifier->observers), ++ "Notifier %p has active observers when removing", notifier); ++ } ++ ++ DWC_CIRCLEQ_REMOVE_INIT(&manager->notifiers, notifier, list_entry); ++ free_notifier(notifier); ++ ++ DWC_INFO("Notifier unregistered"); ++ dump_manager(); ++} ++ ++/* Add an observer to observe the notifier for a particular state, event, or notification. */ ++int dwc_add_observer(void *observer, void *object, char *notification, ++ dwc_notifier_callback_t callback, void *data) ++{ ++ notifier_t *notifier = find_notifier(object); ++ observer_t *new_observer; ++ ++ if (!notifier) { ++ DWC_ERROR("Notifier %p is not found when adding observer\n", object); ++ return -DWC_E_INVALID; ++ } ++ ++ new_observer = alloc_observer(notifier->mem_ctx, observer, notification, callback, data); ++ if (!new_observer) { ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ DWC_CIRCLEQ_INSERT_TAIL(¬ifier->observers, new_observer, list_entry); ++ ++ DWC_INFO("Added observer %p to notifier %p observing notification %s, callback=%p, data=%p", ++ observer, object, notification, callback, data); ++ ++ dump_manager(); ++ return 0; ++} ++ ++int dwc_remove_observer(void *observer) ++{ ++ notifier_t *n; ++ ++ DWC_ASSERT(manager, "Notification manager not found"); ++ ++ DWC_CIRCLEQ_FOREACH(n, &manager->notifiers, list_entry) { ++ observer_t *o; ++ observer_t *o2; ++ ++ DWC_CIRCLEQ_FOREACH_SAFE(o, o2, &n->observers, list_entry) { ++ if (o->observer == observer) { ++ DWC_CIRCLEQ_REMOVE_INIT(&n->observers, o, list_entry); ++ DWC_INFO("Removing observer %p from notifier %p watching notification %s:", ++ o->observer, n->object, o->notification); ++ free_observer(n->mem_ctx, o); ++ } ++ } ++ } ++ ++ dump_manager(); ++ return 0; ++} ++ ++typedef struct callback_data { ++ void *mem_ctx; ++ dwc_notifier_callback_t cb; ++ void *observer; ++ void *data; ++ void *object; ++ char *notification; ++ void *notification_data; ++} cb_data_t; ++ ++static void cb_task(void *data) ++{ ++ cb_data_t *cb = (cb_data_t *)data; ++ ++ cb->cb(cb->object, cb->notification, cb->observer, cb->notification_data, cb->data); ++ dwc_free(cb->mem_ctx, cb); ++} ++ ++void dwc_notify(dwc_notifier_t *notifier, char *notification, void *notification_data) ++{ ++ observer_t *o; ++ ++ DWC_ASSERT(manager, "Notification manager not found"); ++ ++ DWC_CIRCLEQ_FOREACH(o, ¬ifier->observers, list_entry) { ++ int len = DWC_STRLEN(notification); ++ ++ if (DWC_STRLEN(o->notification) != len) { ++ continue; ++ } ++ ++ if (DWC_STRNCMP(o->notification, notification, len) == 0) { ++ cb_data_t *cb_data = dwc_alloc(notifier->mem_ctx, sizeof(cb_data_t)); ++ ++ if (!cb_data) { ++ DWC_ERROR("Failed to allocate callback data\n"); ++ return; ++ } ++ ++ cb_data->mem_ctx = notifier->mem_ctx; ++ cb_data->cb = o->callback; ++ cb_data->observer = o->observer; ++ cb_data->data = o->data; ++ cb_data->object = notifier->object; ++ cb_data->notification = notification; ++ cb_data->notification_data = notification_data; ++ DWC_DEBUGC("Observer found %p for notification %s\n", o->observer, notification); ++ DWC_WORKQ_SCHEDULE(manager->wq, cb_task, cb_data, ++ "Notify callback from %p for Notification %s, to observer %p", ++ cb_data->object, notification, cb_data->observer); ++ } ++ } ++} ++ ++#endif /* DWC_NOTIFYLIB */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_notifier.h +@@ -0,0 +1,122 @@ ++ ++#ifndef __DWC_NOTIFIER_H__ ++#define __DWC_NOTIFIER_H__ ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "dwc_os.h" ++ ++/** @file ++ * ++ * A simple implementation of the Observer pattern. Any "module" can ++ * register as an observer or notifier. The notion of "module" is abstract and ++ * can mean anything used to identify either an observer or notifier. Usually ++ * it will be a pointer to a data structure which contains some state, ie an ++ * object. ++ * ++ * Before any notifiers can be added, the global notification manager must be ++ * brought up with dwc_alloc_notification_manager(). ++ * dwc_free_notification_manager() will bring it down and free all resources. ++ * These would typically be called upon module load and unload. The ++ * notification manager is a single global instance that handles all registered ++ * observable modules and observers so this should be done only once. ++ * ++ * A module can be observable by using Notifications to publicize some general ++ * information about it's state or operation. It does not care who listens, or ++ * even if anyone listens, or what they do with the information. The observable ++ * modules do not need to know any information about it's observers or their ++ * interface, or their state or data. ++ * ++ * Any module can register to emit Notifications. It should publish a list of ++ * notifications that it can emit and their behavior, such as when they will get ++ * triggered, and what information will be provided to the observer. Then it ++ * should register itself as an observable module. See dwc_register_notifier(). ++ * ++ * Any module can observe any observable, registered module, provided it has a ++ * handle to the other module and knows what notifications to observe. See ++ * dwc_add_observer(). ++ * ++ * A function of type dwc_notifier_callback_t is called whenever a notification ++ * is triggered with one or more observers observing it. This function is ++ * called in it's own process so it may sleep or block if needed. It is ++ * guaranteed to be called sometime after the notification has occurred and will ++ * be called once per each time the notification is triggered. It will NOT be ++ * called in the same process context used to trigger the notification. ++ * ++ * @section Limitiations ++ * ++ * Keep in mind that Notifications that can be triggered in rapid sucession may ++ * schedule too many processes too handle. Be aware of this limitation when ++ * designing to use notifications, and only add notifications for appropriate ++ * observable information. ++ * ++ * Also Notification callbacks are not synchronous. If you need to synchronize ++ * the behavior between module/observer you must use other means. And perhaps ++ * that will mean Notifications are not the proper solution. ++ */ ++ ++struct dwc_notifier; ++typedef struct dwc_notifier dwc_notifier_t; ++ ++/** The callback function must be of this type. ++ * ++ * @param object This is the object that is being observed. ++ * @param notification This is the notification that was triggered. ++ * @param observer This is the observer ++ * @param notification_data This is notification-specific data that the notifier ++ * has included in this notification. The value of this should be published in ++ * the documentation of the observable module with the notifications. ++ * @param user_data This is any custom data that the observer provided when ++ * adding itself as an observer to the notification. */ ++typedef void (*dwc_notifier_callback_t)(void *object, char *notification, void *observer, ++ void *notification_data, void *user_data); ++ ++/** Brings up the notification manager. */ ++extern int dwc_alloc_notification_manager(void *mem_ctx, void *wkq_ctx); ++/** Brings down the notification manager. */ ++extern void dwc_free_notification_manager(void); ++ ++/** This function registers an observable module. A dwc_notifier_t object is ++ * returned to the observable module. This is an opaque object that is used by ++ * the observable module to trigger notifications. This object should only be ++ * accessible to functions that are authorized to trigger notifications for this ++ * module. Observers do not need this object. */ ++extern dwc_notifier_t *dwc_register_notifier(void *mem_ctx, void *object); ++ ++/** This function unregisters an observable module. All observers have to be ++ * removed prior to unregistration. */ ++extern void dwc_unregister_notifier(dwc_notifier_t *notifier); ++ ++/** Add a module as an observer to the observable module. The observable module ++ * needs to have previously registered with the notification manager. ++ * ++ * @param observer The observer module ++ * @param object The module to observe ++ * @param notification The notification to observe ++ * @param callback The callback function to call ++ * @param user_data Any additional user data to pass into the callback function */ ++extern int dwc_add_observer(void *observer, void *object, char *notification, ++ dwc_notifier_callback_t callback, void *user_data); ++ ++/** Removes the specified observer from all notifications that it is currently ++ * observing. */ ++extern int dwc_remove_observer(void *observer); ++ ++/** This function triggers a Notification. It should be called by the ++ * observable module, or any module or library which the observable module ++ * allows to trigger notification on it's behalf. Such as the dwc_cc_t. ++ * ++ * dwc_notify is a non-blocking function. Callbacks are scheduled called in ++ * their own process context for each trigger. Callbacks can be blocking. ++ * dwc_notify can be called from interrupt context if needed. ++ * ++ */ ++void dwc_notify(dwc_notifier_t *notifier, char *notification, void *notification_data); ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* __DWC_NOTIFIER_H__ */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_os.h +@@ -0,0 +1,1260 @@ ++/* ========================================================================= ++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_os.h $ ++ * $Revision: #14 $ ++ * $Date: 2010/11/04 $ ++ * $Change: 1621695 $ ++ * ++ * Synopsys Portability Library Software and documentation ++ * (hereinafter, "Software") is an Unsupported proprietary work of ++ * Synopsys, Inc. unless otherwise expressly agreed to in writing ++ * between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product ++ * under any End User Software License Agreement or Agreement for ++ * Licensed Product with Synopsys or any supplement thereto. You are ++ * permitted to use and redistribute this Software in source and binary ++ * forms, with or without modification, provided that redistributions ++ * of source code must retain this notice. You may not view, use, ++ * disclose, copy or distribute this file or any information contained ++ * herein except pursuant to this license grant from Synopsys. If you ++ * do not agree with this notice, including the disclaimer below, then ++ * you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" ++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL ++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY ++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE ++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================= */ ++#ifndef _DWC_OS_H_ ++#define _DWC_OS_H_ ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++/** @file ++ * ++ * DWC portability library, low level os-wrapper functions ++ * ++ */ ++ ++/* These basic types need to be defined by some OS header file or custom header ++ * file for your specific target architecture. ++ * ++ * uint8_t, int8_t, uint16_t, int16_t, uint32_t, int32_t, uint64_t, int64_t ++ * ++ * Any custom or alternate header file must be added and enabled here. ++ */ ++ ++#ifdef DWC_LINUX ++# include <linux/types.h> ++# ifdef CONFIG_DEBUG_MUTEXES ++# include <linux/mutex.h> ++# endif ++# include <linux/errno.h> ++# include <stdarg.h> ++#endif ++ ++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) ++# include <os_dep.h> ++#endif ++ ++ ++/** @name Primitive Types and Values */ ++ ++/** We define a boolean type for consistency. Can be either YES or NO */ ++typedef uint8_t dwc_bool_t; ++#define YES 1 ++#define NO 0 ++ ++#ifdef DWC_LINUX ++ ++/** @name Error Codes */ ++#define DWC_E_INVALID EINVAL ++#define DWC_E_NO_MEMORY ENOMEM ++#define DWC_E_NO_DEVICE ENODEV ++#define DWC_E_NOT_SUPPORTED EOPNOTSUPP ++#define DWC_E_TIMEOUT ETIMEDOUT ++#define DWC_E_BUSY EBUSY ++#define DWC_E_AGAIN EAGAIN ++#define DWC_E_RESTART ERESTART ++#define DWC_E_ABORT ECONNABORTED ++#define DWC_E_SHUTDOWN ESHUTDOWN ++#define DWC_E_NO_DATA ENODATA ++#define DWC_E_DISCONNECT ECONNRESET ++#define DWC_E_UNKNOWN EINVAL ++#define DWC_E_NO_STREAM_RES ENOSR ++#define DWC_E_COMMUNICATION ECOMM ++#define DWC_E_OVERFLOW EOVERFLOW ++#define DWC_E_PROTOCOL EPROTO ++#define DWC_E_IN_PROGRESS EINPROGRESS ++#define DWC_E_PIPE EPIPE ++#define DWC_E_IO EIO ++#define DWC_E_NO_SPACE ENOSPC ++ ++#else ++ ++/** @name Error Codes */ ++#define DWC_E_INVALID 1001 ++#define DWC_E_NO_MEMORY 1002 ++#define DWC_E_NO_DEVICE 1003 ++#define DWC_E_NOT_SUPPORTED 1004 ++#define DWC_E_TIMEOUT 1005 ++#define DWC_E_BUSY 1006 ++#define DWC_E_AGAIN 1007 ++#define DWC_E_RESTART 1008 ++#define DWC_E_ABORT 1009 ++#define DWC_E_SHUTDOWN 1010 ++#define DWC_E_NO_DATA 1011 ++#define DWC_E_DISCONNECT 2000 ++#define DWC_E_UNKNOWN 3000 ++#define DWC_E_NO_STREAM_RES 4001 ++#define DWC_E_COMMUNICATION 4002 ++#define DWC_E_OVERFLOW 4003 ++#define DWC_E_PROTOCOL 4004 ++#define DWC_E_IN_PROGRESS 4005 ++#define DWC_E_PIPE 4006 ++#define DWC_E_IO 4007 ++#define DWC_E_NO_SPACE 4008 ++ ++#endif ++ ++ ++/** @name Tracing/Logging Functions ++ * ++ * These function provide the capability to add tracing, debugging, and error ++ * messages, as well exceptions as assertions. The WUDEV uses these ++ * extensively. These could be logged to the main console, the serial port, an ++ * internal buffer, etc. These functions could also be no-op if they are too ++ * expensive on your system. By default undefining the DEBUG macro already ++ * no-ops some of these functions. */ ++ ++/** Returns non-zero if in interrupt context. */ ++extern dwc_bool_t DWC_IN_IRQ(void); ++#define dwc_in_irq DWC_IN_IRQ ++ ++/** Returns "IRQ" if DWC_IN_IRQ is true. */ ++static inline char *dwc_irq(void) { ++ return DWC_IN_IRQ() ? "IRQ" : ""; ++} ++ ++/** Returns non-zero if in bottom-half context. */ ++extern dwc_bool_t DWC_IN_BH(void); ++#define dwc_in_bh DWC_IN_BH ++ ++/** Returns "BH" if DWC_IN_BH is true. */ ++static inline char *dwc_bh(void) { ++ return DWC_IN_BH() ? "BH" : ""; ++} ++ ++/** ++ * A vprintf() clone. Just call vprintf if you've got it. ++ */ ++extern void DWC_VPRINTF(char *format, va_list args); ++#define dwc_vprintf DWC_VPRINTF ++ ++/** ++ * A vsnprintf() clone. Just call vprintf if you've got it. ++ */ ++extern int DWC_VSNPRINTF(char *str, int size, char *format, va_list args); ++#define dwc_vsnprintf DWC_VSNPRINTF ++ ++/** ++ * printf() clone. Just call printf if you've go it. ++ */ ++extern void DWC_PRINTF(char *format, ...) ++/* This provides compiler level static checking of the parameters if you're ++ * using GCC. */ ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 1, 2))); ++#else ++ ; ++#endif ++#define dwc_printf DWC_PRINTF ++ ++/** ++ * sprintf() clone. Just call sprintf if you've got it. ++ */ ++extern int DWC_SPRINTF(char *string, char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 2, 3))); ++#else ++ ; ++#endif ++#define dwc_sprintf DWC_SPRINTF ++ ++/** ++ * snprintf() clone. Just call snprintf if you've got it. ++ */ ++extern int DWC_SNPRINTF(char *string, int size, char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 3, 4))); ++#else ++ ; ++#endif ++#define dwc_snprintf DWC_SNPRINTF ++ ++/** ++ * Prints a WARNING message. On systems that don't differentiate between ++ * warnings and regular log messages, just print it. Indicates that something ++ * may be wrong with the driver. Works like printf(). ++ * ++ * Use the DWC_WARN macro to call this function. ++ */ ++extern void __DWC_WARN(char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 1, 2))); ++#else ++ ; ++#endif ++ ++/** ++ * Prints an error message. On systems that don't differentiate between errors ++ * and regular log messages, just print it. Indicates that something went wrong ++ * with the driver. Works like printf(). ++ * ++ * Use the DWC_ERROR macro to call this function. ++ */ ++extern void __DWC_ERROR(char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 1, 2))); ++#else ++ ; ++#endif ++ ++/** ++ * Prints an exception error message and takes some user-defined action such as ++ * print out a backtrace or trigger a breakpoint. Indicates that something went ++ * abnormally wrong with the driver such as programmer error, or other ++ * exceptional condition. It should not be ignored so even on systems without ++ * printing capability, some action should be taken to notify the developer of ++ * it. Works like printf(). ++ */ ++extern void DWC_EXCEPTION(char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 1, 2))); ++#else ++ ; ++#endif ++#define dwc_exception DWC_EXCEPTION ++ ++#ifndef DWC_OTG_DEBUG_LEV ++#define DWC_OTG_DEBUG_LEV 0 ++#endif ++ ++#ifdef DEBUG ++/** ++ * Prints out a debug message. Used for logging/trace messages. ++ * ++ * Use the DWC_DEBUG macro to call this function ++ */ ++extern void __DWC_DEBUG(char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 1, 2))); ++#else ++ ; ++#endif ++#else ++#define __DWC_DEBUG printk ++#endif ++ ++/** ++ * Prints out a Debug message. ++ */ ++#define DWC_DEBUG(_format, _args...) __DWC_DEBUG("DEBUG:%s:%s: " _format "\n", \ ++ __func__, dwc_irq(), ## _args) ++#define dwc_debug DWC_DEBUG ++/** ++ * Prints out a Debug message if enabled at compile time. ++ */ ++#if DWC_OTG_DEBUG_LEV > 0 ++#define DWC_DEBUGC(_format, _args...) DWC_DEBUG(_format, ##_args ) ++#else ++#define DWC_DEBUGC(_format, _args...) ++#endif ++#define dwc_debugc DWC_DEBUGC ++/** ++ * Prints out an informative message. ++ */ ++#define DWC_INFO(_format, _args...) DWC_PRINTF("INFO:%s: " _format "\n", \ ++ dwc_irq(), ## _args) ++#define dwc_info DWC_INFO ++/** ++ * Prints out an informative message if enabled at compile time. ++ */ ++#if DWC_OTG_DEBUG_LEV > 1 ++#define DWC_INFOC(_format, _args...) DWC_INFO(_format, ##_args ) ++#else ++#define DWC_INFOC(_format, _args...) ++#endif ++#define dwc_infoc DWC_INFOC ++/** ++ * Prints out a warning message. ++ */ ++#define DWC_WARN(_format, _args...) __DWC_WARN("WARN:%s:%s:%d: " _format "\n", \ ++ dwc_irq(), __func__, __LINE__, ## _args) ++#define dwc_warn DWC_WARN ++/** ++ * Prints out an error message. ++ */ ++#define DWC_ERROR(_format, _args...) __DWC_ERROR("ERROR:%s:%s:%d: " _format "\n", \ ++ dwc_irq(), __func__, __LINE__, ## _args) ++#define dwc_error DWC_ERROR ++ ++#define DWC_PROTO_ERROR(_format, _args...) __DWC_WARN("ERROR:%s:%s:%d: " _format "\n", \ ++ dwc_irq(), __func__, __LINE__, ## _args) ++#define dwc_proto_error DWC_PROTO_ERROR ++ ++#ifdef DEBUG ++/** Prints out a exception error message if the _expr expression fails. Disabled ++ * if DEBUG is not enabled. */ ++#define DWC_ASSERT(_expr, _format, _args...) do { \ ++ if (!(_expr)) { DWC_EXCEPTION("%s:%s:%d: " _format "\n", dwc_irq(), \ ++ __FILE__, __LINE__, ## _args); } \ ++ } while (0) ++#else ++#define DWC_ASSERT(_x...) ++#endif ++#define dwc_assert DWC_ASSERT ++ ++ ++/** @name Byte Ordering ++ * The following functions are for conversions between processor's byte ordering ++ * and specific ordering you want. ++ */ ++ ++/** Converts 32 bit data in CPU byte ordering to little endian. */ ++extern uint32_t DWC_CPU_TO_LE32(uint32_t *p); ++#define dwc_cpu_to_le32 DWC_CPU_TO_LE32 ++ ++/** Converts 32 bit data in CPU byte orderint to big endian. */ ++extern uint32_t DWC_CPU_TO_BE32(uint32_t *p); ++#define dwc_cpu_to_be32 DWC_CPU_TO_BE32 ++ ++/** Converts 32 bit little endian data to CPU byte ordering. */ ++extern uint32_t DWC_LE32_TO_CPU(uint32_t *p); ++#define dwc_le32_to_cpu DWC_LE32_TO_CPU ++ ++/** Converts 32 bit big endian data to CPU byte ordering. */ ++extern uint32_t DWC_BE32_TO_CPU(uint32_t *p); ++#define dwc_be32_to_cpu DWC_BE32_TO_CPU ++ ++/** Converts 16 bit data in CPU byte ordering to little endian. */ ++extern uint16_t DWC_CPU_TO_LE16(uint16_t *p); ++#define dwc_cpu_to_le16 DWC_CPU_TO_LE16 ++ ++/** Converts 16 bit data in CPU byte orderint to big endian. */ ++extern uint16_t DWC_CPU_TO_BE16(uint16_t *p); ++#define dwc_cpu_to_be16 DWC_CPU_TO_BE16 ++ ++/** Converts 16 bit little endian data to CPU byte ordering. */ ++extern uint16_t DWC_LE16_TO_CPU(uint16_t *p); ++#define dwc_le16_to_cpu DWC_LE16_TO_CPU ++ ++/** Converts 16 bit bi endian data to CPU byte ordering. */ ++extern uint16_t DWC_BE16_TO_CPU(uint16_t *p); ++#define dwc_be16_to_cpu DWC_BE16_TO_CPU ++ ++ ++/** @name Register Read/Write ++ * ++ * The following six functions should be implemented to read/write registers of ++ * 32-bit and 64-bit sizes. All modules use this to read/write register values. ++ * The reg value is a pointer to the register calculated from the void *base ++ * variable passed into the driver when it is started. */ ++ ++#ifdef DWC_LINUX ++/* Linux doesn't need any extra parameters for register read/write, so we ++ * just throw away the IO context parameter. ++ */ ++/** Reads the content of a 32-bit register. */ ++extern uint32_t DWC_READ_REG32(uint32_t volatile *reg); ++#define dwc_read_reg32(_ctx_,_reg_) DWC_READ_REG32(_reg_) ++ ++/** Reads the content of a 64-bit register. */ ++extern uint64_t DWC_READ_REG64(uint64_t volatile *reg); ++#define dwc_read_reg64(_ctx_,_reg_) DWC_READ_REG64(_reg_) ++ ++/** Writes to a 32-bit register. */ ++extern void DWC_WRITE_REG32(uint32_t volatile *reg, uint32_t value); ++#define dwc_write_reg32(_ctx_,_reg_,_val_) DWC_WRITE_REG32(_reg_, _val_) ++ ++/** Writes to a 64-bit register. */ ++extern void DWC_WRITE_REG64(uint64_t volatile *reg, uint64_t value); ++#define dwc_write_reg64(_ctx_,_reg_,_val_) DWC_WRITE_REG64(_reg_, _val_) ++ ++/** ++ * Modify bit values in a register. Using the ++ * algorithm: (reg_contents & ~clear_mask) | set_mask. ++ */ ++extern void DWC_MODIFY_REG32(uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask); ++#define dwc_modify_reg32(_ctx_,_reg_,_cmsk_,_smsk_) DWC_MODIFY_REG32(_reg_,_cmsk_,_smsk_) ++extern void DWC_MODIFY_REG64(uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask); ++#define dwc_modify_reg64(_ctx_,_reg_,_cmsk_,_smsk_) DWC_MODIFY_REG64(_reg_,_cmsk_,_smsk_) ++ ++#endif /* DWC_LINUX */ ++ ++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) ++typedef struct dwc_ioctx { ++ struct device *dev; ++ bus_space_tag_t iot; ++ bus_space_handle_t ioh; ++} dwc_ioctx_t; ++ ++/** BSD needs two extra parameters for register read/write, so we pass ++ * them in using the IO context parameter. ++ */ ++/** Reads the content of a 32-bit register. */ ++extern uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg); ++#define dwc_read_reg32 DWC_READ_REG32 ++ ++/** Reads the content of a 64-bit register. */ ++extern uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg); ++#define dwc_read_reg64 DWC_READ_REG64 ++ ++/** Writes to a 32-bit register. */ ++extern void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value); ++#define dwc_write_reg32 DWC_WRITE_REG32 ++ ++/** Writes to a 64-bit register. */ ++extern void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value); ++#define dwc_write_reg64 DWC_WRITE_REG64 ++ ++/** ++ * Modify bit values in a register. Using the ++ * algorithm: (reg_contents & ~clear_mask) | set_mask. ++ */ ++extern void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask); ++#define dwc_modify_reg32 DWC_MODIFY_REG32 ++extern void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask); ++#define dwc_modify_reg64 DWC_MODIFY_REG64 ++ ++#endif /* DWC_FREEBSD || DWC_NETBSD */ ++ ++/** @cond */ ++ ++/** @name Some convenience MACROS used internally. Define DWC_DEBUG_REGS to log the ++ * register writes. */ ++ ++#ifdef DWC_LINUX ++ ++# ifdef DWC_DEBUG_REGS ++ ++#define dwc_define_read_write_reg_n(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg##_n(_container_type *container, int num) { \ ++ return DWC_READ_REG32(&container->regs->_reg[num]); \ ++} \ ++static inline void dwc_write_##_reg##_n(_container_type *container, int num, uint32_t data) { \ ++ DWC_DEBUG("WRITING %8s[%d]: %p: %08x", #_reg, num, \ ++ &(((uint32_t*)container->regs->_reg)[num]), data); \ ++ DWC_WRITE_REG32(&(((uint32_t*)container->regs->_reg)[num]), data); \ ++} ++ ++#define dwc_define_read_write_reg(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg(_container_type *container) { \ ++ return DWC_READ_REG32(&container->regs->_reg); \ ++} \ ++static inline void dwc_write_##_reg(_container_type *container, uint32_t data) { \ ++ DWC_DEBUG("WRITING %11s: %p: %08x", #_reg, &container->regs->_reg, data); \ ++ DWC_WRITE_REG32(&container->regs->_reg, data); \ ++} ++ ++# else /* DWC_DEBUG_REGS */ ++ ++#define dwc_define_read_write_reg_n(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg##_n(_container_type *container, int num) { \ ++ return DWC_READ_REG32(&container->regs->_reg[num]); \ ++} \ ++static inline void dwc_write_##_reg##_n(_container_type *container, int num, uint32_t data) { \ ++ DWC_WRITE_REG32(&(((uint32_t*)container->regs->_reg)[num]), data); \ ++} ++ ++#define dwc_define_read_write_reg(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg(_container_type *container) { \ ++ return DWC_READ_REG32(&container->regs->_reg); \ ++} \ ++static inline void dwc_write_##_reg(_container_type *container, uint32_t data) { \ ++ DWC_WRITE_REG32(&container->regs->_reg, data); \ ++} ++ ++# endif /* DWC_DEBUG_REGS */ ++ ++#endif /* DWC_LINUX */ ++ ++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) ++ ++# ifdef DWC_DEBUG_REGS ++ ++#define dwc_define_read_write_reg_n(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg##_n(void *io_ctx, _container_type *container, int num) { \ ++ return DWC_READ_REG32(io_ctx, &container->regs->_reg[num]); \ ++} \ ++static inline void dwc_write_##_reg##_n(void *io_ctx, _container_type *container, int num, uint32_t data) { \ ++ DWC_DEBUG("WRITING %8s[%d]: %p: %08x", #_reg, num, \ ++ &(((uint32_t*)container->regs->_reg)[num]), data); \ ++ DWC_WRITE_REG32(io_ctx, &(((uint32_t*)container->regs->_reg)[num]), data); \ ++} ++ ++#define dwc_define_read_write_reg(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg(void *io_ctx, _container_type *container) { \ ++ return DWC_READ_REG32(io_ctx, &container->regs->_reg); \ ++} \ ++static inline void dwc_write_##_reg(void *io_ctx, _container_type *container, uint32_t data) { \ ++ DWC_DEBUG("WRITING %11s: %p: %08x", #_reg, &container->regs->_reg, data); \ ++ DWC_WRITE_REG32(io_ctx, &container->regs->_reg, data); \ ++} ++ ++# else /* DWC_DEBUG_REGS */ ++ ++#define dwc_define_read_write_reg_n(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg##_n(void *io_ctx, _container_type *container, int num) { \ ++ return DWC_READ_REG32(io_ctx, &container->regs->_reg[num]); \ ++} \ ++static inline void dwc_write_##_reg##_n(void *io_ctx, _container_type *container, int num, uint32_t data) { \ ++ DWC_WRITE_REG32(io_ctx, &(((uint32_t*)container->regs->_reg)[num]), data); \ ++} ++ ++#define dwc_define_read_write_reg(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg(void *io_ctx, _container_type *container) { \ ++ return DWC_READ_REG32(io_ctx, &container->regs->_reg); \ ++} \ ++static inline void dwc_write_##_reg(void *io_ctx, _container_type *container, uint32_t data) { \ ++ DWC_WRITE_REG32(io_ctx, &container->regs->_reg, data); \ ++} ++ ++# endif /* DWC_DEBUG_REGS */ ++ ++#endif /* DWC_FREEBSD || DWC_NETBSD */ ++ ++/** @endcond */ ++ ++ ++#ifdef DWC_CRYPTOLIB ++/** @name Crypto Functions ++ * ++ * These are the low-level cryptographic functions used by the driver. */ ++ ++/** Perform AES CBC */ ++extern int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out); ++#define dwc_aes_cbc DWC_AES_CBC ++ ++/** Fill the provided buffer with random bytes. These should be cryptographic grade random numbers. */ ++extern void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length); ++#define dwc_random_bytes DWC_RANDOM_BYTES ++ ++/** Perform the SHA-256 hash function */ ++extern int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out); ++#define dwc_sha256 DWC_SHA256 ++ ++/** Calculated the HMAC-SHA256 */ ++extern int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t *out); ++#define dwc_hmac_sha256 DWC_HMAC_SHA256 ++ ++#endif /* DWC_CRYPTOLIB */ ++ ++ ++/** @name Memory Allocation ++ * ++ * These function provide access to memory allocation. There are only 2 DMA ++ * functions and 3 Regular memory functions that need to be implemented. None ++ * of the memory debugging routines need to be implemented. The allocation ++ * routines all ZERO the contents of the memory. ++ * ++ * Defining DWC_DEBUG_MEMORY turns on memory debugging and statistic gathering. ++ * This checks for memory leaks, keeping track of alloc/free pairs. It also ++ * keeps track of how much memory the driver is using at any given time. */ ++ ++#define DWC_PAGE_SIZE 4096 ++#define DWC_PAGE_OFFSET(addr) (((uint32_t)addr) & 0xfff) ++#define DWC_PAGE_ALIGNED(addr) ((((uint32_t)addr) & 0xfff) == 0) ++ ++#define DWC_INVALID_DMA_ADDR 0x0 ++ ++#ifdef DWC_LINUX ++/** Type for a DMA address */ ++typedef dma_addr_t dwc_dma_t; ++#endif ++ ++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) ++typedef bus_addr_t dwc_dma_t; ++#endif ++ ++#ifdef DWC_FREEBSD ++typedef struct dwc_dmactx { ++ struct device *dev; ++ bus_dma_tag_t dma_tag; ++ bus_dmamap_t dma_map; ++ bus_addr_t dma_paddr; ++ void *dma_vaddr; ++} dwc_dmactx_t; ++#endif ++ ++#ifdef DWC_NETBSD ++typedef struct dwc_dmactx { ++ struct device *dev; ++ bus_dma_tag_t dma_tag; ++ bus_dmamap_t dma_map; ++ bus_dma_segment_t segs[1]; ++ int nsegs; ++ bus_addr_t dma_paddr; ++ void *dma_vaddr; ++} dwc_dmactx_t; ++#endif ++ ++/* @todo these functions will be added in the future */ ++#if 0 ++/** ++ * Creates a DMA pool from which you can allocate DMA buffers. Buffers ++ * allocated from this pool will be guaranteed to meet the size, alignment, and ++ * boundary requirements specified. ++ * ++ * @param[in] size Specifies the size of the buffers that will be allocated from ++ * this pool. ++ * @param[in] align Specifies the byte alignment requirements of the buffers ++ * allocated from this pool. Must be a power of 2. ++ * @param[in] boundary Specifies the N-byte boundary that buffers allocated from ++ * this pool must not cross. ++ * ++ * @returns A pointer to an internal opaque structure which is not to be ++ * accessed outside of these library functions. Use this handle to specify ++ * which pools to allocate/free DMA buffers from and also to destroy the pool, ++ * when you are done with it. ++ */ ++extern dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, uint32_t align, uint32_t boundary); ++ ++/** ++ * Destroy a DMA pool. All buffers allocated from that pool must be freed first. ++ */ ++extern void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool); ++ ++/** ++ * Allocate a buffer from the specified DMA pool and zeros its contents. ++ */ ++extern void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr); ++ ++/** ++ * Free a previously allocated buffer from the DMA pool. ++ */ ++extern void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr); ++#endif ++ ++/** Allocates a DMA capable buffer and zeroes its contents. */ ++extern void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr); ++ ++/** Allocates a DMA capable buffer and zeroes its contents in atomic contest */ ++extern void *__DWC_DMA_ALLOC_ATOMIC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr); ++ ++/** Frees a previously allocated buffer. */ ++extern void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr); ++ ++/** Allocates a block of memory and zeroes its contents. */ ++extern void *__DWC_ALLOC(void *mem_ctx, uint32_t size); ++ ++/** Allocates a block of memory and zeroes its contents, in an atomic manner ++ * which can be used inside interrupt context. The size should be sufficiently ++ * small, a few KB at most, such that failures are not likely to occur. Can just call ++ * __DWC_ALLOC if it is atomic. */ ++extern void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size); ++ ++/** Frees a previously allocated buffer. */ ++extern void __DWC_FREE(void *mem_ctx, void *addr); ++ ++#ifndef DWC_DEBUG_MEMORY ++ ++#define DWC_ALLOC(_size_) __DWC_ALLOC(NULL, _size_) ++#define DWC_ALLOC_ATOMIC(_size_) __DWC_ALLOC_ATOMIC(NULL, _size_) ++#define DWC_FREE(_addr_) __DWC_FREE(NULL, _addr_) ++ ++# ifdef DWC_LINUX ++#define DWC_DMA_ALLOC(_size_,_dma_) __DWC_DMA_ALLOC(NULL, _size_, _dma_) ++#define DWC_DMA_ALLOC_ATOMIC(_size_,_dma_) __DWC_DMA_ALLOC_ATOMIC(NULL, _size_,_dma_) ++#define DWC_DMA_FREE(_size_,_virt_,_dma_) __DWC_DMA_FREE(NULL, _size_, _virt_, _dma_) ++# endif ++ ++# if defined(DWC_FREEBSD) || defined(DWC_NETBSD) ++#define DWC_DMA_ALLOC __DWC_DMA_ALLOC ++#define DWC_DMA_FREE __DWC_DMA_FREE ++# endif ++extern void *dwc_dma_alloc_atomic_debug(uint32_t size, dwc_dma_t *dma_addr, char const *func, int line); ++ ++#else /* DWC_DEBUG_MEMORY */ ++ ++extern void *dwc_alloc_debug(void *mem_ctx, uint32_t size, char const *func, int line); ++extern void *dwc_alloc_atomic_debug(void *mem_ctx, uint32_t size, char const *func, int line); ++extern void dwc_free_debug(void *mem_ctx, void *addr, char const *func, int line); ++extern void *dwc_dma_alloc_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr, ++ char const *func, int line); ++extern void *dwc_dma_alloc_atomic_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr, ++ char const *func, int line); ++extern void dwc_dma_free_debug(void *dma_ctx, uint32_t size, void *virt_addr, ++ dwc_dma_t dma_addr, char const *func, int line); ++ ++extern int dwc_memory_debug_start(void *mem_ctx); ++extern void dwc_memory_debug_stop(void); ++extern void dwc_memory_debug_report(void); ++ ++#define DWC_ALLOC(_size_) dwc_alloc_debug(NULL, _size_, __func__, __LINE__) ++#define DWC_ALLOC_ATOMIC(_size_) dwc_alloc_atomic_debug(NULL, _size_, \ ++ __func__, __LINE__) ++#define DWC_FREE(_addr_) dwc_free_debug(NULL, _addr_, __func__, __LINE__) ++ ++# ifdef DWC_LINUX ++#define DWC_DMA_ALLOC(_size_,_dma_) dwc_dma_alloc_debug(NULL, _size_, \ ++ _dma_, __func__, __LINE__) ++#define DWC_DMA_ALLOC_ATOMIC(_size_,_dma_) dwc_dma_alloc_atomic_debug(NULL, _size_, \ ++ _dma_, __func__, __LINE__) ++#define DWC_DMA_FREE(_size_,_virt_,_dma_) dwc_dma_free_debug(NULL, _size_, \ ++ _virt_, _dma_, __func__, __LINE__) ++# endif ++ ++# if defined(DWC_FREEBSD) || defined(DWC_NETBSD) ++#define DWC_DMA_ALLOC(_ctx_,_size_,_dma_) dwc_dma_alloc_debug(_ctx_, _size_, \ ++ _dma_, __func__, __LINE__) ++#define DWC_DMA_FREE(_ctx_,_size_,_virt_,_dma_) dwc_dma_free_debug(_ctx_, _size_, \ ++ _virt_, _dma_, __func__, __LINE__) ++# endif ++ ++#endif /* DWC_DEBUG_MEMORY */ ++ ++#define dwc_alloc(_ctx_,_size_) DWC_ALLOC(_size_) ++#define dwc_alloc_atomic(_ctx_,_size_) DWC_ALLOC_ATOMIC(_size_) ++#define dwc_free(_ctx_,_addr_) DWC_FREE(_addr_) ++ ++#ifdef DWC_LINUX ++/* Linux doesn't need any extra parameters for DMA buffer allocation, so we ++ * just throw away the DMA context parameter. ++ */ ++#define dwc_dma_alloc(_ctx_,_size_,_dma_) DWC_DMA_ALLOC(_size_, _dma_) ++#define dwc_dma_alloc_atomic(_ctx_,_size_,_dma_) DWC_DMA_ALLOC_ATOMIC(_size_, _dma_) ++#define dwc_dma_free(_ctx_,_size_,_virt_,_dma_) DWC_DMA_FREE(_size_, _virt_, _dma_) ++#endif ++ ++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) ++/** BSD needs several extra parameters for DMA buffer allocation, so we pass ++ * them in using the DMA context parameter. ++ */ ++#define dwc_dma_alloc DWC_DMA_ALLOC ++#define dwc_dma_free DWC_DMA_FREE ++#endif ++ ++ ++/** @name Memory and String Processing */ ++ ++/** memset() clone */ ++extern void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size); ++#define dwc_memset DWC_MEMSET ++ ++/** memcpy() clone */ ++extern void *DWC_MEMCPY(void *dest, void const *src, uint32_t size); ++#define dwc_memcpy DWC_MEMCPY ++ ++/** memmove() clone */ ++extern void *DWC_MEMMOVE(void *dest, void *src, uint32_t size); ++#define dwc_memmove DWC_MEMMOVE ++ ++/** memcmp() clone */ ++extern int DWC_MEMCMP(void *m1, void *m2, uint32_t size); ++#define dwc_memcmp DWC_MEMCMP ++ ++/** strcmp() clone */ ++extern int DWC_STRCMP(void *s1, void *s2); ++#define dwc_strcmp DWC_STRCMP ++ ++/** strncmp() clone */ ++extern int DWC_STRNCMP(void *s1, void *s2, uint32_t size); ++#define dwc_strncmp DWC_STRNCMP ++ ++/** strlen() clone, for NULL terminated ASCII strings */ ++extern int DWC_STRLEN(char const *str); ++#define dwc_strlen DWC_STRLEN ++ ++/** strcpy() clone, for NULL terminated ASCII strings */ ++extern char *DWC_STRCPY(char *to, const char *from); ++#define dwc_strcpy DWC_STRCPY ++ ++/** strdup() clone. If you wish to use memory allocation debugging, this ++ * implementation of strdup should use the DWC_* memory routines instead of ++ * calling a predefined strdup. Otherwise the memory allocated by this routine ++ * will not be seen by the debugging routines. */ ++extern char *DWC_STRDUP(char const *str); ++#define dwc_strdup(_ctx_,_str_) DWC_STRDUP(_str_) ++ ++/** NOT an atoi() clone. Read the description carefully. Returns an integer ++ * converted from the string str in base 10 unless the string begins with a "0x" ++ * in which case it is base 16. String must be a NULL terminated sequence of ++ * ASCII characters and may optionally begin with whitespace, a + or -, and a ++ * "0x" prefix if base 16. The remaining characters must be valid digits for ++ * the number and end with a NULL character. If any invalid characters are ++ * encountered or it returns with a negative error code and the results of the ++ * conversion are undefined. On sucess it returns 0. Overflow conditions are ++ * undefined. An example implementation using atoi() can be referenced from the ++ * Linux implementation. */ ++extern int DWC_ATOI(const char *str, int32_t *value); ++#define dwc_atoi DWC_ATOI ++ ++/** Same as above but for unsigned. */ ++extern int DWC_ATOUI(const char *str, uint32_t *value); ++#define dwc_atoui DWC_ATOUI ++ ++#ifdef DWC_UTFLIB ++/** This routine returns a UTF16LE unicode encoded string from a UTF8 string. */ ++extern int DWC_UTF8_TO_UTF16LE(uint8_t const *utf8string, uint16_t *utf16string, unsigned len); ++#define dwc_utf8_to_utf16le DWC_UTF8_TO_UTF16LE ++#endif ++ ++ ++/** @name Wait queues ++ * ++ * Wait queues provide a means of synchronizing between threads or processes. A ++ * process can block on a waitq if some condition is not true, waiting for it to ++ * become true. When the waitq is triggered all waiting process will get ++ * unblocked and the condition will be check again. Waitqs should be triggered ++ * every time a condition can potentially change.*/ ++struct dwc_waitq; ++ ++/** Type for a waitq */ ++typedef struct dwc_waitq dwc_waitq_t; ++ ++/** The type of waitq condition callback function. This is called every time ++ * condition is evaluated. */ ++typedef int (*dwc_waitq_condition_t)(void *data); ++ ++/** Allocate a waitq */ ++extern dwc_waitq_t *DWC_WAITQ_ALLOC(void); ++#define dwc_waitq_alloc(_ctx_) DWC_WAITQ_ALLOC() ++ ++/** Free a waitq */ ++extern void DWC_WAITQ_FREE(dwc_waitq_t *wq); ++#define dwc_waitq_free DWC_WAITQ_FREE ++ ++/** Check the condition and if it is false, block on the waitq. When unblocked, check the ++ * condition again. The function returns when the condition becomes true. The return value ++ * is 0 on condition true, DWC_WAITQ_ABORTED on abort or killed, or DWC_WAITQ_UNKNOWN on error. */ ++extern int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data); ++#define dwc_waitq_wait DWC_WAITQ_WAIT ++ ++/** Check the condition and if it is false, block on the waitq. When unblocked, ++ * check the condition again. The function returns when the condition become ++ * true or the timeout has passed. The return value is 0 on condition true or ++ * DWC_TIMED_OUT on timeout, or DWC_WAITQ_ABORTED, or DWC_WAITQ_UNKNOWN on ++ * error. */ ++extern int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, ++ void *data, int32_t msecs); ++#define dwc_waitq_wait_timeout DWC_WAITQ_WAIT_TIMEOUT ++ ++/** Trigger a waitq, unblocking all processes. This should be called whenever a condition ++ * has potentially changed. */ ++extern void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq); ++#define dwc_waitq_trigger DWC_WAITQ_TRIGGER ++ ++/** Unblock all processes waiting on the waitq with an ABORTED result. */ ++extern void DWC_WAITQ_ABORT(dwc_waitq_t *wq); ++#define dwc_waitq_abort DWC_WAITQ_ABORT ++ ++ ++/** @name Threads ++ * ++ * A thread must be explicitly stopped. It must check DWC_THREAD_SHOULD_STOP ++ * whenever it is woken up, and then return. The DWC_THREAD_STOP function ++ * returns the value from the thread. ++ */ ++ ++struct dwc_thread; ++ ++/** Type for a thread */ ++typedef struct dwc_thread dwc_thread_t; ++ ++/** The thread function */ ++typedef int (*dwc_thread_function_t)(void *data); ++ ++/** Create a thread and start it running the thread_function. Returns a handle ++ * to the thread */ ++extern dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data); ++#define dwc_thread_run(_ctx_,_func_,_name_,_data_) DWC_THREAD_RUN(_func_, _name_, _data_) ++ ++/** Stops a thread. Return the value returned by the thread. Or will return ++ * DWC_ABORT if the thread never started. */ ++extern int DWC_THREAD_STOP(dwc_thread_t *thread); ++#define dwc_thread_stop DWC_THREAD_STOP ++ ++/** Signifies to the thread that it must stop. */ ++#ifdef DWC_LINUX ++/* Linux doesn't need any parameters for kthread_should_stop() */ ++extern dwc_bool_t DWC_THREAD_SHOULD_STOP(void); ++#define dwc_thread_should_stop(_thrd_) DWC_THREAD_SHOULD_STOP() ++ ++/* No thread_exit function in Linux */ ++#define dwc_thread_exit(_thrd_) ++#endif ++ ++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) ++/** BSD needs the thread pointer for kthread_suspend_check() */ ++extern dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread); ++#define dwc_thread_should_stop DWC_THREAD_SHOULD_STOP ++ ++/** The thread must call this to exit. */ ++extern void DWC_THREAD_EXIT(dwc_thread_t *thread); ++#define dwc_thread_exit DWC_THREAD_EXIT ++#endif ++ ++ ++/** @name Work queues ++ * ++ * Workqs are used to queue a callback function to be called at some later time, ++ * in another thread. */ ++struct dwc_workq; ++ ++/** Type for a workq */ ++typedef struct dwc_workq dwc_workq_t; ++ ++/** The type of the callback function to be called. */ ++typedef void (*dwc_work_callback_t)(void *data); ++ ++/** Allocate a workq */ ++extern dwc_workq_t *DWC_WORKQ_ALLOC(char *name); ++#define dwc_workq_alloc(_ctx_,_name_) DWC_WORKQ_ALLOC(_name_) ++ ++/** Free a workq. All work must be completed before being freed. */ ++extern void DWC_WORKQ_FREE(dwc_workq_t *workq); ++#define dwc_workq_free DWC_WORKQ_FREE ++ ++/** Schedule a callback on the workq, passing in data. The function will be ++ * scheduled at some later time. */ ++extern void DWC_WORKQ_SCHEDULE(dwc_workq_t *workq, dwc_work_callback_t cb, ++ void *data, char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 4, 5))); ++#else ++ ; ++#endif ++#define dwc_workq_schedule DWC_WORKQ_SCHEDULE ++ ++/** Schedule a callback on the workq, that will be called until at least ++ * given number miliseconds have passed. */ ++extern void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *workq, dwc_work_callback_t cb, ++ void *data, uint32_t time, char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 5, 6))); ++#else ++ ; ++#endif ++#define dwc_workq_schedule_delayed DWC_WORKQ_SCHEDULE_DELAYED ++ ++/** The number of processes in the workq */ ++extern int DWC_WORKQ_PENDING(dwc_workq_t *workq); ++#define dwc_workq_pending DWC_WORKQ_PENDING ++ ++/** Blocks until all the work in the workq is complete or timed out. Returns < ++ * 0 on timeout. */ ++extern int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout); ++#define dwc_workq_wait_work_done DWC_WORKQ_WAIT_WORK_DONE ++ ++ ++/** @name Tasklets ++ * ++ */ ++struct dwc_tasklet; ++ ++/** Type for a tasklet */ ++typedef struct dwc_tasklet dwc_tasklet_t; ++ ++/** The type of the callback function to be called */ ++typedef void (*dwc_tasklet_callback_t)(void *data); ++ ++/** Allocates a tasklet */ ++extern dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data); ++#define dwc_task_alloc(_ctx_,_name_,_cb_,_data_) DWC_TASK_ALLOC(_name_, _cb_, _data_) ++ ++/** Frees a tasklet */ ++extern void DWC_TASK_FREE(dwc_tasklet_t *task); ++#define dwc_task_free DWC_TASK_FREE ++ ++/** Schedules a tasklet to run */ ++extern void DWC_TASK_SCHEDULE(dwc_tasklet_t *task); ++#define dwc_task_schedule DWC_TASK_SCHEDULE ++ ++ ++/** @name Timer ++ * ++ * Callbacks must be small and atomic. ++ */ ++struct dwc_timer; ++ ++/** Type for a timer */ ++typedef struct dwc_timer dwc_timer_t; ++ ++/** The type of the callback function to be called */ ++typedef void (*dwc_timer_callback_t)(void *data); ++ ++/** Allocates a timer */ ++extern dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data); ++#define dwc_timer_alloc(_ctx_,_name_,_cb_,_data_) DWC_TIMER_ALLOC(_name_,_cb_,_data_) ++ ++/** Frees a timer */ ++extern void DWC_TIMER_FREE(dwc_timer_t *timer); ++#define dwc_timer_free DWC_TIMER_FREE ++ ++/** Schedules the timer to run at time ms from now. And will repeat at every ++ * repeat_interval msec therafter ++ * ++ * Modifies a timer that is still awaiting execution to a new expiration time. ++ * The mod_time is added to the old time. */ ++extern void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time); ++#define dwc_timer_schedule DWC_TIMER_SCHEDULE ++ ++/** Disables the timer from execution. */ ++extern void DWC_TIMER_CANCEL(dwc_timer_t *timer); ++#define dwc_timer_cancel DWC_TIMER_CANCEL ++ ++ ++/** @name Spinlocks ++ * ++ * These locks are used when the work between the lock/unlock is atomic and ++ * short. Interrupts are also disabled during the lock/unlock and thus they are ++ * suitable to lock between interrupt/non-interrupt context. They also lock ++ * between processes if you have multiple CPUs or Preemption. If you don't have ++ * multiple CPUS or Preemption, then the you can simply implement the ++ * DWC_SPINLOCK and DWC_SPINUNLOCK to disable and enable interrupts. Because ++ * the work between the lock/unlock is atomic, the process context will never ++ * change, and so you never have to lock between processes. */ ++ ++struct dwc_spinlock; ++ ++/** Type for a spinlock */ ++typedef struct dwc_spinlock dwc_spinlock_t; ++ ++/** Type for the 'flags' argument to spinlock funtions */ ++typedef unsigned long dwc_irqflags_t; ++ ++/** Returns an initialized lock variable. This function should allocate and ++ * initialize the OS-specific data structure used for locking. This data ++ * structure is to be used for the DWC_LOCK and DWC_UNLOCK functions and should ++ * be freed by the DWC_FREE_LOCK when it is no longer used. */ ++extern dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void); ++#define dwc_spinlock_alloc(_ctx_) DWC_SPINLOCK_ALLOC() ++ ++/** Frees an initialized lock variable. */ ++extern void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock); ++#define dwc_spinlock_free(_ctx_,_lock_) DWC_SPINLOCK_FREE(_lock_) ++ ++/** Disables interrupts and blocks until it acquires the lock. ++ * ++ * @param lock Pointer to the spinlock. ++ * @param flags Unsigned long for irq flags storage. ++ */ ++extern void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags); ++#define dwc_spinlock_irqsave DWC_SPINLOCK_IRQSAVE ++ ++/** Re-enables the interrupt and releases the lock. ++ * ++ * @param lock Pointer to the spinlock. ++ * @param flags Unsigned long for irq flags storage. Must be the same as was ++ * passed into DWC_LOCK. ++ */ ++extern void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags); ++#define dwc_spinunlock_irqrestore DWC_SPINUNLOCK_IRQRESTORE ++ ++/** Blocks until it acquires the lock. ++ * ++ * @param lock Pointer to the spinlock. ++ */ ++extern void DWC_SPINLOCK(dwc_spinlock_t *lock); ++#define dwc_spinlock DWC_SPINLOCK ++ ++/** Releases the lock. ++ * ++ * @param lock Pointer to the spinlock. ++ */ ++extern void DWC_SPINUNLOCK(dwc_spinlock_t *lock); ++#define dwc_spinunlock DWC_SPINUNLOCK ++ ++ ++/** @name Mutexes ++ * ++ * Unlike spinlocks Mutexes lock only between processes and the work between the ++ * lock/unlock CAN block, therefore it CANNOT be called from interrupt context. ++ */ ++ ++struct dwc_mutex; ++ ++/** Type for a mutex */ ++typedef struct dwc_mutex dwc_mutex_t; ++ ++/* For Linux Mutex Debugging make it inline because the debugging routines use ++ * the symbol to determine recursive locking. This makes it falsely think ++ * recursive locking occurs. */ ++#if defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES) ++#define DWC_MUTEX_ALLOC_LINUX_DEBUG(__mutexp) ({ \ ++ __mutexp = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mutex)); \ ++ mutex_init((struct mutex *)__mutexp); \ ++}) ++#endif ++ ++/** Allocate a mutex */ ++extern dwc_mutex_t *DWC_MUTEX_ALLOC(void); ++#define dwc_mutex_alloc(_ctx_) DWC_MUTEX_ALLOC() ++ ++/* For memory leak debugging when using Linux Mutex Debugging */ ++#if defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES) ++#define DWC_MUTEX_FREE(__mutexp) do { \ ++ mutex_destroy((struct mutex *)__mutexp); \ ++ DWC_FREE(__mutexp); \ ++} while(0) ++#else ++/** Free a mutex */ ++extern void DWC_MUTEX_FREE(dwc_mutex_t *mutex); ++#define dwc_mutex_free(_ctx_,_mutex_) DWC_MUTEX_FREE(_mutex_) ++#endif ++ ++/** Lock a mutex */ ++extern void DWC_MUTEX_LOCK(dwc_mutex_t *mutex); ++#define dwc_mutex_lock DWC_MUTEX_LOCK ++ ++/** Non-blocking lock returns 1 on successful lock. */ ++extern int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex); ++#define dwc_mutex_trylock DWC_MUTEX_TRYLOCK ++ ++/** Unlock a mutex */ ++extern void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex); ++#define dwc_mutex_unlock DWC_MUTEX_UNLOCK ++ ++ ++/** @name Time */ ++ ++/** Microsecond delay. ++ * ++ * @param usecs Microseconds to delay. ++ */ ++extern void DWC_UDELAY(uint32_t usecs); ++#define dwc_udelay DWC_UDELAY ++ ++/** Millisecond delay. ++ * ++ * @param msecs Milliseconds to delay. ++ */ ++extern void DWC_MDELAY(uint32_t msecs); ++#define dwc_mdelay DWC_MDELAY ++ ++/** Non-busy waiting. ++ * Sleeps for specified number of milliseconds. ++ * ++ * @param msecs Milliseconds to sleep. ++ */ ++extern void DWC_MSLEEP(uint32_t msecs); ++#define dwc_msleep DWC_MSLEEP ++ ++/** ++ * Returns number of milliseconds since boot. ++ */ ++extern uint32_t DWC_TIME(void); ++#define dwc_time DWC_TIME ++ ++ ++ ++ ++/* @mainpage DWC Portability and Common Library ++ * ++ * This is the documentation for the DWC Portability and Common Library. ++ * ++ * @section intro Introduction ++ * ++ * The DWC Portability library consists of wrapper calls and data structures to ++ * all low-level functions which are typically provided by the OS. The WUDEV ++ * driver uses only these functions. In order to port the WUDEV driver, only ++ * the functions in this library need to be re-implemented, with the same ++ * behavior as documented here. ++ * ++ * The Common library consists of higher level functions, which rely only on ++ * calling the functions from the DWC Portability library. These common ++ * routines are shared across modules. Some of the common libraries need to be ++ * used directly by the driver programmer when porting WUDEV. Such as the ++ * parameter and notification libraries. ++ * ++ * @section low Portability Library OS Wrapper Functions ++ * ++ * Any function starting with DWC and in all CAPS is a low-level OS-wrapper that ++ * needs to be implemented when porting, for example DWC_MUTEX_ALLOC(). All of ++ * these functions are included in the dwc_os.h file. ++ * ++ * There are many functions here covering a wide array of OS services. Please ++ * see dwc_os.h for details, and implementation notes for each function. ++ * ++ * @section common Common Library Functions ++ * ++ * Any function starting with dwc and in all lowercase is a common library ++ * routine. These functions have a portable implementation and do not need to ++ * be reimplemented when porting. The common routines can be used by any ++ * driver, and some must be used by the end user to control the drivers. For ++ * example, you must use the Parameter common library in order to set the ++ * parameters in the WUDEV module. ++ * ++ * The common libraries consist of the following: ++ * ++ * - Connection Contexts - Used internally and can be used by end-user. See dwc_cc.h ++ * - Parameters - Used internally and can be used by end-user. See dwc_params.h ++ * - Notifications - Used internally and can be used by end-user. See dwc_notifier.h ++ * - Lists - Used internally and can be used by end-user. See dwc_list.h ++ * - Memory Debugging - Used internally and can be used by end-user. See dwc_os.h ++ * - Modpow - Used internally only. See dwc_modpow.h ++ * - DH - Used internally only. See dwc_dh.h ++ * - Crypto - Used internally only. See dwc_crypto.h ++ * ++ * ++ * @section prereq Prerequistes For dwc_os.h ++ * @subsection types Data Types ++ * ++ * The dwc_os.h file assumes that several low-level data types are pre defined for the ++ * compilation environment. These data types are: ++ * ++ * - uint8_t - unsigned 8-bit data type ++ * - int8_t - signed 8-bit data type ++ * - uint16_t - unsigned 16-bit data type ++ * - int16_t - signed 16-bit data type ++ * - uint32_t - unsigned 32-bit data type ++ * - int32_t - signed 32-bit data type ++ * - uint64_t - unsigned 64-bit data type ++ * - int64_t - signed 64-bit data type ++ * ++ * Ensure that these are defined before using dwc_os.h. The easiest way to do ++ * that is to modify the top of the file to include the appropriate header. ++ * This is already done for the Linux environment. If the DWC_LINUX macro is ++ * defined, the correct header will be added. A standard header <stdint.h> is ++ * also used for environments where standard C headers are available. ++ * ++ * @subsection stdarg Variable Arguments ++ * ++ * Variable arguments are provided by a standard C header <stdarg.h>. it is ++ * available in Both the Linux and ANSI C enviornment. An equivalent must be ++ * provided in your enviornment in order to use dwc_os.h with the debug and ++ * tracing message functionality. ++ * ++ * @subsection thread Threading ++ * ++ * WUDEV Core must be run on an operating system that provides for multiple ++ * threads/processes. Threading can be implemented in many ways, even in ++ * embedded systems without an operating system. At the bare minimum, the ++ * system should be able to start any number of processes at any time to handle ++ * special work. It need not be a pre-emptive system. Process context can ++ * change upon a call to a blocking function. The hardware interrupt context ++ * that calls the module's ISR() function must be differentiable from process ++ * context, even if your processes are impemented via a hardware interrupt. ++ * Further locking mechanism between process must exist (or be implemented), and ++ * process context must have a way to disable interrupts for a period of time to ++ * lock them out. If all of this exists, the functions in dwc_os.h related to ++ * threading should be able to be implemented with the defined behavior. ++ * ++ */ ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* _DWC_OS_H_ */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/usb.h +@@ -0,0 +1,946 @@ ++/* ++ * Copyright (c) 1998 The NetBSD Foundation, Inc. ++ * All rights reserved. ++ * ++ * This code is derived from software contributed to The NetBSD Foundation ++ * by Lennart Augustsson (lennart@augustsson.net) at ++ * Carlstedt Research & Technology. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. All advertising materials mentioning features or use of this software ++ * must display the following acknowledgement: ++ * This product includes software developed by the NetBSD ++ * Foundation, Inc. and its contributors. ++ * 4. Neither the name of The NetBSD Foundation nor the names of its ++ * contributors may be used to endorse or promote products derived ++ * from this software without specific prior written permission. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS ++ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED ++ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS ++ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++/* Modified by Synopsys, Inc, 12/12/2007 */ ++ ++ ++#ifndef _USB_H_ ++#define _USB_H_ ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++/* ++ * The USB records contain some unaligned little-endian word ++ * components. The U[SG]ETW macros take care of both the alignment ++ * and endian problem and should always be used to access non-byte ++ * values. ++ */ ++typedef u_int8_t uByte; ++typedef u_int8_t uWord[2]; ++typedef u_int8_t uDWord[4]; ++ ++#define USETW2(w,h,l) ((w)[0] = (u_int8_t)(l), (w)[1] = (u_int8_t)(h)) ++#define UCONSTW(x) { (x) & 0xff, ((x) >> 8) & 0xff } ++#define UCONSTDW(x) { (x) & 0xff, ((x) >> 8) & 0xff, \ ++ ((x) >> 16) & 0xff, ((x) >> 24) & 0xff } ++ ++#if 1 ++#define UGETW(w) ((w)[0] | ((w)[1] << 8)) ++#define USETW(w,v) ((w)[0] = (u_int8_t)(v), (w)[1] = (u_int8_t)((v) >> 8)) ++#define UGETDW(w) ((w)[0] | ((w)[1] << 8) | ((w)[2] << 16) | ((w)[3] << 24)) ++#define USETDW(w,v) ((w)[0] = (u_int8_t)(v), \ ++ (w)[1] = (u_int8_t)((v) >> 8), \ ++ (w)[2] = (u_int8_t)((v) >> 16), \ ++ (w)[3] = (u_int8_t)((v) >> 24)) ++#else ++/* ++ * On little-endian machines that can handle unanliged accesses ++ * (e.g. i386) these macros can be replaced by the following. ++ */ ++#define UGETW(w) (*(u_int16_t *)(w)) ++#define USETW(w,v) (*(u_int16_t *)(w) = (v)) ++#define UGETDW(w) (*(u_int32_t *)(w)) ++#define USETDW(w,v) (*(u_int32_t *)(w) = (v)) ++#endif ++ ++/* ++ * Macros for accessing UAS IU fields, which are big-endian ++ */ ++#define IUSETW2(w,h,l) ((w)[0] = (u_int8_t)(h), (w)[1] = (u_int8_t)(l)) ++#define IUCONSTW(x) { ((x) >> 8) & 0xff, (x) & 0xff } ++#define IUCONSTDW(x) { ((x) >> 24) & 0xff, ((x) >> 16) & 0xff, \ ++ ((x) >> 8) & 0xff, (x) & 0xff } ++#define IUGETW(w) (((w)[0] << 8) | (w)[1]) ++#define IUSETW(w,v) ((w)[0] = (u_int8_t)((v) >> 8), (w)[1] = (u_int8_t)(v)) ++#define IUGETDW(w) (((w)[0] << 24) | ((w)[1] << 16) | ((w)[2] << 8) | (w)[3]) ++#define IUSETDW(w,v) ((w)[0] = (u_int8_t)((v) >> 24), \ ++ (w)[1] = (u_int8_t)((v) >> 16), \ ++ (w)[2] = (u_int8_t)((v) >> 8), \ ++ (w)[3] = (u_int8_t)(v)) ++ ++#define UPACKED __attribute__((__packed__)) ++ ++typedef struct { ++ uByte bmRequestType; ++ uByte bRequest; ++ uWord wValue; ++ uWord wIndex; ++ uWord wLength; ++} UPACKED usb_device_request_t; ++ ++#define UT_GET_DIR(a) ((a) & 0x80) ++#define UT_WRITE 0x00 ++#define UT_READ 0x80 ++ ++#define UT_GET_TYPE(a) ((a) & 0x60) ++#define UT_STANDARD 0x00 ++#define UT_CLASS 0x20 ++#define UT_VENDOR 0x40 ++ ++#define UT_GET_RECIPIENT(a) ((a) & 0x1f) ++#define UT_DEVICE 0x00 ++#define UT_INTERFACE 0x01 ++#define UT_ENDPOINT 0x02 ++#define UT_OTHER 0x03 ++ ++#define UT_READ_DEVICE (UT_READ | UT_STANDARD | UT_DEVICE) ++#define UT_READ_INTERFACE (UT_READ | UT_STANDARD | UT_INTERFACE) ++#define UT_READ_ENDPOINT (UT_READ | UT_STANDARD | UT_ENDPOINT) ++#define UT_WRITE_DEVICE (UT_WRITE | UT_STANDARD | UT_DEVICE) ++#define UT_WRITE_INTERFACE (UT_WRITE | UT_STANDARD | UT_INTERFACE) ++#define UT_WRITE_ENDPOINT (UT_WRITE | UT_STANDARD | UT_ENDPOINT) ++#define UT_READ_CLASS_DEVICE (UT_READ | UT_CLASS | UT_DEVICE) ++#define UT_READ_CLASS_INTERFACE (UT_READ | UT_CLASS | UT_INTERFACE) ++#define UT_READ_CLASS_OTHER (UT_READ | UT_CLASS | UT_OTHER) ++#define UT_READ_CLASS_ENDPOINT (UT_READ | UT_CLASS | UT_ENDPOINT) ++#define UT_WRITE_CLASS_DEVICE (UT_WRITE | UT_CLASS | UT_DEVICE) ++#define UT_WRITE_CLASS_INTERFACE (UT_WRITE | UT_CLASS | UT_INTERFACE) ++#define UT_WRITE_CLASS_OTHER (UT_WRITE | UT_CLASS | UT_OTHER) ++#define UT_WRITE_CLASS_ENDPOINT (UT_WRITE | UT_CLASS | UT_ENDPOINT) ++#define UT_READ_VENDOR_DEVICE (UT_READ | UT_VENDOR | UT_DEVICE) ++#define UT_READ_VENDOR_INTERFACE (UT_READ | UT_VENDOR | UT_INTERFACE) ++#define UT_READ_VENDOR_OTHER (UT_READ | UT_VENDOR | UT_OTHER) ++#define UT_READ_VENDOR_ENDPOINT (UT_READ | UT_VENDOR | UT_ENDPOINT) ++#define UT_WRITE_VENDOR_DEVICE (UT_WRITE | UT_VENDOR | UT_DEVICE) ++#define UT_WRITE_VENDOR_INTERFACE (UT_WRITE | UT_VENDOR | UT_INTERFACE) ++#define UT_WRITE_VENDOR_OTHER (UT_WRITE | UT_VENDOR | UT_OTHER) ++#define UT_WRITE_VENDOR_ENDPOINT (UT_WRITE | UT_VENDOR | UT_ENDPOINT) ++ ++/* Requests */ ++#define UR_GET_STATUS 0x00 ++#define USTAT_STANDARD_STATUS 0x00 ++#define WUSTAT_WUSB_FEATURE 0x01 ++#define WUSTAT_CHANNEL_INFO 0x02 ++#define WUSTAT_RECEIVED_DATA 0x03 ++#define WUSTAT_MAS_AVAILABILITY 0x04 ++#define WUSTAT_CURRENT_TRANSMIT_POWER 0x05 ++#define UR_CLEAR_FEATURE 0x01 ++#define UR_SET_FEATURE 0x03 ++#define UR_SET_AND_TEST_FEATURE 0x0c ++#define UR_SET_ADDRESS 0x05 ++#define UR_GET_DESCRIPTOR 0x06 ++#define UDESC_DEVICE 0x01 ++#define UDESC_CONFIG 0x02 ++#define UDESC_STRING 0x03 ++#define UDESC_INTERFACE 0x04 ++#define UDESC_ENDPOINT 0x05 ++#define UDESC_SS_USB_COMPANION 0x30 ++#define UDESC_DEVICE_QUALIFIER 0x06 ++#define UDESC_OTHER_SPEED_CONFIGURATION 0x07 ++#define UDESC_INTERFACE_POWER 0x08 ++#define UDESC_OTG 0x09 ++#define WUDESC_SECURITY 0x0c ++#define WUDESC_KEY 0x0d ++#define WUD_GET_KEY_INDEX(_wValue_) ((_wValue_) & 0xf) ++#define WUD_GET_KEY_TYPE(_wValue_) (((_wValue_) & 0x30) >> 4) ++#define WUD_KEY_TYPE_ASSOC 0x01 ++#define WUD_KEY_TYPE_GTK 0x02 ++#define WUD_GET_KEY_ORIGIN(_wValue_) (((_wValue_) & 0x40) >> 6) ++#define WUD_KEY_ORIGIN_HOST 0x00 ++#define WUD_KEY_ORIGIN_DEVICE 0x01 ++#define WUDESC_ENCRYPTION_TYPE 0x0e ++#define WUDESC_BOS 0x0f ++#define WUDESC_DEVICE_CAPABILITY 0x10 ++#define WUDESC_WIRELESS_ENDPOINT_COMPANION 0x11 ++#define UDESC_BOS 0x0f ++#define UDESC_DEVICE_CAPABILITY 0x10 ++#define UDESC_CS_DEVICE 0x21 /* class specific */ ++#define UDESC_CS_CONFIG 0x22 ++#define UDESC_CS_STRING 0x23 ++#define UDESC_CS_INTERFACE 0x24 ++#define UDESC_CS_ENDPOINT 0x25 ++#define UDESC_HUB 0x29 ++#define UR_SET_DESCRIPTOR 0x07 ++#define UR_GET_CONFIG 0x08 ++#define UR_SET_CONFIG 0x09 ++#define UR_GET_INTERFACE 0x0a ++#define UR_SET_INTERFACE 0x0b ++#define UR_SYNCH_FRAME 0x0c ++#define WUR_SET_ENCRYPTION 0x0d ++#define WUR_GET_ENCRYPTION 0x0e ++#define WUR_SET_HANDSHAKE 0x0f ++#define WUR_GET_HANDSHAKE 0x10 ++#define WUR_SET_CONNECTION 0x11 ++#define WUR_SET_SECURITY_DATA 0x12 ++#define WUR_GET_SECURITY_DATA 0x13 ++#define WUR_SET_WUSB_DATA 0x14 ++#define WUDATA_DRPIE_INFO 0x01 ++#define WUDATA_TRANSMIT_DATA 0x02 ++#define WUDATA_TRANSMIT_PARAMS 0x03 ++#define WUDATA_RECEIVE_PARAMS 0x04 ++#define WUDATA_TRANSMIT_POWER 0x05 ++#define WUR_LOOPBACK_DATA_WRITE 0x15 ++#define WUR_LOOPBACK_DATA_READ 0x16 ++#define WUR_SET_INTERFACE_DS 0x17 ++ ++/* Feature numbers */ ++#define UF_ENDPOINT_HALT 0 ++#define UF_DEVICE_REMOTE_WAKEUP 1 ++#define UF_TEST_MODE 2 ++#define UF_DEVICE_B_HNP_ENABLE 3 ++#define UF_DEVICE_A_HNP_SUPPORT 4 ++#define UF_DEVICE_A_ALT_HNP_SUPPORT 5 ++#define WUF_WUSB 3 ++#define WUF_TX_DRPIE 0x0 ++#define WUF_DEV_XMIT_PACKET 0x1 ++#define WUF_COUNT_PACKETS 0x2 ++#define WUF_CAPTURE_PACKETS 0x3 ++#define UF_FUNCTION_SUSPEND 0 ++#define UF_U1_ENABLE 48 ++#define UF_U2_ENABLE 49 ++#define UF_LTM_ENABLE 50 ++ ++/* Class requests from the USB 2.0 hub spec, table 11-15 */ ++#define UCR_CLEAR_HUB_FEATURE (0x2000 | UR_CLEAR_FEATURE) ++#define UCR_CLEAR_PORT_FEATURE (0x2300 | UR_CLEAR_FEATURE) ++#define UCR_GET_HUB_DESCRIPTOR (0xa000 | UR_GET_DESCRIPTOR) ++#define UCR_GET_HUB_STATUS (0xa000 | UR_GET_STATUS) ++#define UCR_GET_PORT_STATUS (0xa300 | UR_GET_STATUS) ++#define UCR_SET_HUB_FEATURE (0x2000 | UR_SET_FEATURE) ++#define UCR_SET_PORT_FEATURE (0x2300 | UR_SET_FEATURE) ++#define UCR_SET_AND_TEST_PORT_FEATURE (0xa300 | UR_SET_AND_TEST_FEATURE) ++ ++#ifdef _MSC_VER ++#include <pshpack1.h> ++#endif ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bDescriptorSubtype; ++} UPACKED usb_descriptor_t; ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++} UPACKED usb_descriptor_header_t; ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uWord bcdUSB; ++#define UD_USB_2_0 0x0200 ++#define UD_IS_USB2(d) (UGETW((d)->bcdUSB) >= UD_USB_2_0) ++ uByte bDeviceClass; ++ uByte bDeviceSubClass; ++ uByte bDeviceProtocol; ++ uByte bMaxPacketSize; ++ /* The fields below are not part of the initial descriptor. */ ++ uWord idVendor; ++ uWord idProduct; ++ uWord bcdDevice; ++ uByte iManufacturer; ++ uByte iProduct; ++ uByte iSerialNumber; ++ uByte bNumConfigurations; ++} UPACKED usb_device_descriptor_t; ++#define USB_DEVICE_DESCRIPTOR_SIZE 18 ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uWord wTotalLength; ++ uByte bNumInterface; ++ uByte bConfigurationValue; ++ uByte iConfiguration; ++#define UC_ATT_ONE (1 << 7) /* must be set */ ++#define UC_ATT_SELFPOWER (1 << 6) /* self powered */ ++#define UC_ATT_WAKEUP (1 << 5) /* can wakeup */ ++#define UC_ATT_BATTERY (1 << 4) /* battery powered */ ++ uByte bmAttributes; ++#define UC_BUS_POWERED 0x80 ++#define UC_SELF_POWERED 0x40 ++#define UC_REMOTE_WAKEUP 0x20 ++ uByte bMaxPower; /* max current in 2 mA units */ ++#define UC_POWER_FACTOR 2 ++} UPACKED usb_config_descriptor_t; ++#define USB_CONFIG_DESCRIPTOR_SIZE 9 ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bInterfaceNumber; ++ uByte bAlternateSetting; ++ uByte bNumEndpoints; ++ uByte bInterfaceClass; ++ uByte bInterfaceSubClass; ++ uByte bInterfaceProtocol; ++ uByte iInterface; ++} UPACKED usb_interface_descriptor_t; ++#define USB_INTERFACE_DESCRIPTOR_SIZE 9 ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bEndpointAddress; ++#define UE_GET_DIR(a) ((a) & 0x80) ++#define UE_SET_DIR(a,d) ((a) | (((d)&1) << 7)) ++#define UE_DIR_IN 0x80 ++#define UE_DIR_OUT 0x00 ++#define UE_ADDR 0x0f ++#define UE_GET_ADDR(a) ((a) & UE_ADDR) ++ uByte bmAttributes; ++#define UE_XFERTYPE 0x03 ++#define UE_CONTROL 0x00 ++#define UE_ISOCHRONOUS 0x01 ++#define UE_BULK 0x02 ++#define UE_INTERRUPT 0x03 ++#define UE_GET_XFERTYPE(a) ((a) & UE_XFERTYPE) ++#define UE_ISO_TYPE 0x0c ++#define UE_ISO_ASYNC 0x04 ++#define UE_ISO_ADAPT 0x08 ++#define UE_ISO_SYNC 0x0c ++#define UE_GET_ISO_TYPE(a) ((a) & UE_ISO_TYPE) ++ uWord wMaxPacketSize; ++ uByte bInterval; ++} UPACKED usb_endpoint_descriptor_t; ++#define USB_ENDPOINT_DESCRIPTOR_SIZE 7 ++ ++typedef struct ss_endpoint_companion_descriptor { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bMaxBurst; ++#define USSE_GET_MAX_STREAMS(a) ((a) & 0x1f) ++#define USSE_SET_MAX_STREAMS(a, b) ((a) | ((b) & 0x1f)) ++#define USSE_GET_MAX_PACKET_NUM(a) ((a) & 0x03) ++#define USSE_SET_MAX_PACKET_NUM(a, b) ((a) | ((b) & 0x03)) ++ uByte bmAttributes; ++ uWord wBytesPerInterval; ++} UPACKED ss_endpoint_companion_descriptor_t; ++#define USB_SS_ENDPOINT_COMPANION_DESCRIPTOR_SIZE 6 ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uWord bString[127]; ++} UPACKED usb_string_descriptor_t; ++#define USB_MAX_STRING_LEN 128 ++#define USB_LANGUAGE_TABLE 0 /* # of the string language id table */ ++ ++/* Hub specific request */ ++#define UR_GET_BUS_STATE 0x02 ++#define UR_CLEAR_TT_BUFFER 0x08 ++#define UR_RESET_TT 0x09 ++#define UR_GET_TT_STATE 0x0a ++#define UR_STOP_TT 0x0b ++ ++/* Hub features */ ++#define UHF_C_HUB_LOCAL_POWER 0 ++#define UHF_C_HUB_OVER_CURRENT 1 ++#define UHF_PORT_CONNECTION 0 ++#define UHF_PORT_ENABLE 1 ++#define UHF_PORT_SUSPEND 2 ++#define UHF_PORT_OVER_CURRENT 3 ++#define UHF_PORT_RESET 4 ++#define UHF_PORT_L1 5 ++#define UHF_PORT_POWER 8 ++#define UHF_PORT_LOW_SPEED 9 ++#define UHF_PORT_HIGH_SPEED 10 ++#define UHF_C_PORT_CONNECTION 16 ++#define UHF_C_PORT_ENABLE 17 ++#define UHF_C_PORT_SUSPEND 18 ++#define UHF_C_PORT_OVER_CURRENT 19 ++#define UHF_C_PORT_RESET 20 ++#define UHF_C_PORT_L1 23 ++#define UHF_PORT_TEST 21 ++#define UHF_PORT_INDICATOR 22 ++ ++typedef struct { ++ uByte bDescLength; ++ uByte bDescriptorType; ++ uByte bNbrPorts; ++ uWord wHubCharacteristics; ++#define UHD_PWR 0x0003 ++#define UHD_PWR_GANGED 0x0000 ++#define UHD_PWR_INDIVIDUAL 0x0001 ++#define UHD_PWR_NO_SWITCH 0x0002 ++#define UHD_COMPOUND 0x0004 ++#define UHD_OC 0x0018 ++#define UHD_OC_GLOBAL 0x0000 ++#define UHD_OC_INDIVIDUAL 0x0008 ++#define UHD_OC_NONE 0x0010 ++#define UHD_TT_THINK 0x0060 ++#define UHD_TT_THINK_8 0x0000 ++#define UHD_TT_THINK_16 0x0020 ++#define UHD_TT_THINK_24 0x0040 ++#define UHD_TT_THINK_32 0x0060 ++#define UHD_PORT_IND 0x0080 ++ uByte bPwrOn2PwrGood; /* delay in 2 ms units */ ++#define UHD_PWRON_FACTOR 2 ++ uByte bHubContrCurrent; ++ uByte DeviceRemovable[32]; /* max 255 ports */ ++#define UHD_NOT_REMOV(desc, i) \ ++ (((desc)->DeviceRemovable[(i)/8] >> ((i) % 8)) & 1) ++ /* deprecated */ uByte PortPowerCtrlMask[1]; ++} UPACKED usb_hub_descriptor_t; ++#define USB_HUB_DESCRIPTOR_SIZE 9 /* includes deprecated PortPowerCtrlMask */ ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uWord bcdUSB; ++ uByte bDeviceClass; ++ uByte bDeviceSubClass; ++ uByte bDeviceProtocol; ++ uByte bMaxPacketSize0; ++ uByte bNumConfigurations; ++ uByte bReserved; ++} UPACKED usb_device_qualifier_t; ++#define USB_DEVICE_QUALIFIER_SIZE 10 ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bmAttributes; ++#define UOTG_SRP 0x01 ++#define UOTG_HNP 0x02 ++} UPACKED usb_otg_descriptor_t; ++ ++/* OTG feature selectors */ ++#define UOTG_B_HNP_ENABLE 3 ++#define UOTG_A_HNP_SUPPORT 4 ++#define UOTG_A_ALT_HNP_SUPPORT 5 ++ ++typedef struct { ++ uWord wStatus; ++/* Device status flags */ ++#define UDS_SELF_POWERED 0x0001 ++#define UDS_REMOTE_WAKEUP 0x0002 ++/* Endpoint status flags */ ++#define UES_HALT 0x0001 ++} UPACKED usb_status_t; ++ ++typedef struct { ++ uWord wHubStatus; ++#define UHS_LOCAL_POWER 0x0001 ++#define UHS_OVER_CURRENT 0x0002 ++ uWord wHubChange; ++} UPACKED usb_hub_status_t; ++ ++typedef struct { ++ uWord wPortStatus; ++#define UPS_CURRENT_CONNECT_STATUS 0x0001 ++#define UPS_PORT_ENABLED 0x0002 ++#define UPS_SUSPEND 0x0004 ++#define UPS_OVERCURRENT_INDICATOR 0x0008 ++#define UPS_RESET 0x0010 ++#define UPS_PORT_POWER 0x0100 ++#define UPS_LOW_SPEED 0x0200 ++#define UPS_HIGH_SPEED 0x0400 ++#define UPS_PORT_TEST 0x0800 ++#define UPS_PORT_INDICATOR 0x1000 ++ uWord wPortChange; ++#define UPS_C_CONNECT_STATUS 0x0001 ++#define UPS_C_PORT_ENABLED 0x0002 ++#define UPS_C_SUSPEND 0x0004 ++#define UPS_C_OVERCURRENT_INDICATOR 0x0008 ++#define UPS_C_PORT_RESET 0x0010 ++} UPACKED usb_port_status_t; ++ ++#ifdef _MSC_VER ++#include <poppack.h> ++#endif ++ ++/* Device class codes */ ++#define UDCLASS_IN_INTERFACE 0x00 ++#define UDCLASS_COMM 0x02 ++#define UDCLASS_HUB 0x09 ++#define UDSUBCLASS_HUB 0x00 ++#define UDPROTO_FSHUB 0x00 ++#define UDPROTO_HSHUBSTT 0x01 ++#define UDPROTO_HSHUBMTT 0x02 ++#define UDCLASS_DIAGNOSTIC 0xdc ++#define UDCLASS_WIRELESS 0xe0 ++#define UDSUBCLASS_RF 0x01 ++#define UDPROTO_BLUETOOTH 0x01 ++#define UDCLASS_VENDOR 0xff ++ ++/* Interface class codes */ ++#define UICLASS_UNSPEC 0x00 ++ ++#define UICLASS_AUDIO 0x01 ++#define UISUBCLASS_AUDIOCONTROL 1 ++#define UISUBCLASS_AUDIOSTREAM 2 ++#define UISUBCLASS_MIDISTREAM 3 ++ ++#define UICLASS_CDC 0x02 /* communication */ ++#define UISUBCLASS_DIRECT_LINE_CONTROL_MODEL 1 ++#define UISUBCLASS_ABSTRACT_CONTROL_MODEL 2 ++#define UISUBCLASS_TELEPHONE_CONTROL_MODEL 3 ++#define UISUBCLASS_MULTICHANNEL_CONTROL_MODEL 4 ++#define UISUBCLASS_CAPI_CONTROLMODEL 5 ++#define UISUBCLASS_ETHERNET_NETWORKING_CONTROL_MODEL 6 ++#define UISUBCLASS_ATM_NETWORKING_CONTROL_MODEL 7 ++#define UIPROTO_CDC_AT 1 ++ ++#define UICLASS_HID 0x03 ++#define UISUBCLASS_BOOT 1 ++#define UIPROTO_BOOT_KEYBOARD 1 ++ ++#define UICLASS_PHYSICAL 0x05 ++ ++#define UICLASS_IMAGE 0x06 ++ ++#define UICLASS_PRINTER 0x07 ++#define UISUBCLASS_PRINTER 1 ++#define UIPROTO_PRINTER_UNI 1 ++#define UIPROTO_PRINTER_BI 2 ++#define UIPROTO_PRINTER_1284 3 ++ ++#define UICLASS_MASS 0x08 ++#define UISUBCLASS_RBC 1 ++#define UISUBCLASS_SFF8020I 2 ++#define UISUBCLASS_QIC157 3 ++#define UISUBCLASS_UFI 4 ++#define UISUBCLASS_SFF8070I 5 ++#define UISUBCLASS_SCSI 6 ++#define UIPROTO_MASS_CBI_I 0 ++#define UIPROTO_MASS_CBI 1 ++#define UIPROTO_MASS_BBB_OLD 2 /* Not in the spec anymore */ ++#define UIPROTO_MASS_BBB 80 /* 'P' for the Iomega Zip drive */ ++ ++#define UICLASS_HUB 0x09 ++#define UISUBCLASS_HUB 0 ++#define UIPROTO_FSHUB 0 ++#define UIPROTO_HSHUBSTT 0 /* Yes, same as previous */ ++#define UIPROTO_HSHUBMTT 1 ++ ++#define UICLASS_CDC_DATA 0x0a ++#define UISUBCLASS_DATA 0 ++#define UIPROTO_DATA_ISDNBRI 0x30 /* Physical iface */ ++#define UIPROTO_DATA_HDLC 0x31 /* HDLC */ ++#define UIPROTO_DATA_TRANSPARENT 0x32 /* Transparent */ ++#define UIPROTO_DATA_Q921M 0x50 /* Management for Q921 */ ++#define UIPROTO_DATA_Q921 0x51 /* Data for Q921 */ ++#define UIPROTO_DATA_Q921TM 0x52 /* TEI multiplexer for Q921 */ ++#define UIPROTO_DATA_V42BIS 0x90 /* Data compression */ ++#define UIPROTO_DATA_Q931 0x91 /* Euro-ISDN */ ++#define UIPROTO_DATA_V120 0x92 /* V.24 rate adaption */ ++#define UIPROTO_DATA_CAPI 0x93 /* CAPI 2.0 commands */ ++#define UIPROTO_DATA_HOST_BASED 0xfd /* Host based driver */ ++#define UIPROTO_DATA_PUF 0xfe /* see Prot. Unit Func. Desc.*/ ++#define UIPROTO_DATA_VENDOR 0xff /* Vendor specific */ ++ ++#define UICLASS_SMARTCARD 0x0b ++ ++/*#define UICLASS_FIRM_UPD 0x0c*/ ++ ++#define UICLASS_SECURITY 0x0d ++ ++#define UICLASS_DIAGNOSTIC 0xdc ++ ++#define UICLASS_WIRELESS 0xe0 ++#define UISUBCLASS_RF 0x01 ++#define UIPROTO_BLUETOOTH 0x01 ++ ++#define UICLASS_APPL_SPEC 0xfe ++#define UISUBCLASS_FIRMWARE_DOWNLOAD 1 ++#define UISUBCLASS_IRDA 2 ++#define UIPROTO_IRDA 0 ++ ++#define UICLASS_VENDOR 0xff ++ ++#define USB_HUB_MAX_DEPTH 5 ++ ++/* ++ * Minimum time a device needs to be powered down to go through ++ * a power cycle. XXX Are these time in the spec? ++ */ ++#define USB_POWER_DOWN_TIME 200 /* ms */ ++#define USB_PORT_POWER_DOWN_TIME 100 /* ms */ ++ ++#if 0 ++/* These are the values from the spec. */ ++#define USB_PORT_RESET_DELAY 10 /* ms */ ++#define USB_PORT_ROOT_RESET_DELAY 50 /* ms */ ++#define USB_PORT_RESET_RECOVERY 10 /* ms */ ++#define USB_PORT_POWERUP_DELAY 100 /* ms */ ++#define USB_SET_ADDRESS_SETTLE 2 /* ms */ ++#define USB_RESUME_DELAY (20*5) /* ms */ ++#define USB_RESUME_WAIT 10 /* ms */ ++#define USB_RESUME_RECOVERY 10 /* ms */ ++#define USB_EXTRA_POWER_UP_TIME 0 /* ms */ ++#else ++/* Allow for marginal (i.e. non-conforming) devices. */ ++#define USB_PORT_RESET_DELAY 50 /* ms */ ++#define USB_PORT_ROOT_RESET_DELAY 250 /* ms */ ++#define USB_PORT_RESET_RECOVERY 250 /* ms */ ++#define USB_PORT_POWERUP_DELAY 300 /* ms */ ++#define USB_SET_ADDRESS_SETTLE 10 /* ms */ ++#define USB_RESUME_DELAY (50*5) /* ms */ ++#define USB_RESUME_WAIT 50 /* ms */ ++#define USB_RESUME_RECOVERY 50 /* ms */ ++#define USB_EXTRA_POWER_UP_TIME 20 /* ms */ ++#endif ++ ++#define USB_MIN_POWER 100 /* mA */ ++#define USB_MAX_POWER 500 /* mA */ ++ ++#define USB_BUS_RESET_DELAY 100 /* ms XXX?*/ ++ ++#define USB_UNCONFIG_NO 0 ++#define USB_UNCONFIG_INDEX (-1) ++ ++/*** ioctl() related stuff ***/ ++ ++struct usb_ctl_request { ++ int ucr_addr; ++ usb_device_request_t ucr_request; ++ void *ucr_data; ++ int ucr_flags; ++#define USBD_SHORT_XFER_OK 0x04 /* allow short reads */ ++ int ucr_actlen; /* actual length transferred */ ++}; ++ ++struct usb_alt_interface { ++ int uai_config_index; ++ int uai_interface_index; ++ int uai_alt_no; ++}; ++ ++#define USB_CURRENT_CONFIG_INDEX (-1) ++#define USB_CURRENT_ALT_INDEX (-1) ++ ++struct usb_config_desc { ++ int ucd_config_index; ++ usb_config_descriptor_t ucd_desc; ++}; ++ ++struct usb_interface_desc { ++ int uid_config_index; ++ int uid_interface_index; ++ int uid_alt_index; ++ usb_interface_descriptor_t uid_desc; ++}; ++ ++struct usb_endpoint_desc { ++ int ued_config_index; ++ int ued_interface_index; ++ int ued_alt_index; ++ int ued_endpoint_index; ++ usb_endpoint_descriptor_t ued_desc; ++}; ++ ++struct usb_full_desc { ++ int ufd_config_index; ++ u_int ufd_size; ++ u_char *ufd_data; ++}; ++ ++struct usb_string_desc { ++ int usd_string_index; ++ int usd_language_id; ++ usb_string_descriptor_t usd_desc; ++}; ++ ++struct usb_ctl_report_desc { ++ int ucrd_size; ++ u_char ucrd_data[1024]; /* filled data size will vary */ ++}; ++ ++typedef struct { u_int32_t cookie; } usb_event_cookie_t; ++ ++#define USB_MAX_DEVNAMES 4 ++#define USB_MAX_DEVNAMELEN 16 ++struct usb_device_info { ++ u_int8_t udi_bus; ++ u_int8_t udi_addr; /* device address */ ++ usb_event_cookie_t udi_cookie; ++ char udi_product[USB_MAX_STRING_LEN]; ++ char udi_vendor[USB_MAX_STRING_LEN]; ++ char udi_release[8]; ++ u_int16_t udi_productNo; ++ u_int16_t udi_vendorNo; ++ u_int16_t udi_releaseNo; ++ u_int8_t udi_class; ++ u_int8_t udi_subclass; ++ u_int8_t udi_protocol; ++ u_int8_t udi_config; ++ u_int8_t udi_speed; ++#define USB_SPEED_UNKNOWN 0 ++#define USB_SPEED_LOW 1 ++#define USB_SPEED_FULL 2 ++#define USB_SPEED_HIGH 3 ++#define USB_SPEED_VARIABLE 4 ++#define USB_SPEED_SUPER 5 ++ int udi_power; /* power consumption in mA, 0 if selfpowered */ ++ int udi_nports; ++ char udi_devnames[USB_MAX_DEVNAMES][USB_MAX_DEVNAMELEN]; ++ u_int8_t udi_ports[16];/* hub only: addresses of devices on ports */ ++#define USB_PORT_ENABLED 0xff ++#define USB_PORT_SUSPENDED 0xfe ++#define USB_PORT_POWERED 0xfd ++#define USB_PORT_DISABLED 0xfc ++}; ++ ++struct usb_ctl_report { ++ int ucr_report; ++ u_char ucr_data[1024]; /* filled data size will vary */ ++}; ++ ++struct usb_device_stats { ++ u_long uds_requests[4]; /* indexed by transfer type UE_* */ ++}; ++ ++#define WUSB_MIN_IE 0x80 ++#define WUSB_WCTA_IE 0x80 ++#define WUSB_WCONNECTACK_IE 0x81 ++#define WUSB_WHOSTINFO_IE 0x82 ++#define WUHI_GET_CA(_bmAttributes_) ((_bmAttributes_) & 0x3) ++#define WUHI_CA_RECONN 0x00 ++#define WUHI_CA_LIMITED 0x01 ++#define WUHI_CA_ALL 0x03 ++#define WUHI_GET_MLSI(_bmAttributes_) (((_bmAttributes_) & 0x38) >> 3) ++#define WUSB_WCHCHANGEANNOUNCE_IE 0x83 ++#define WUSB_WDEV_DISCONNECT_IE 0x84 ++#define WUSB_WHOST_DISCONNECT_IE 0x85 ++#define WUSB_WRELEASE_CHANNEL_IE 0x86 ++#define WUSB_WWORK_IE 0x87 ++#define WUSB_WCHANNEL_STOP_IE 0x88 ++#define WUSB_WDEV_KEEPALIVE_IE 0x89 ++#define WUSB_WISOCH_DISCARD_IE 0x8A ++#define WUSB_WRESETDEVICE_IE 0x8B ++#define WUSB_WXMIT_PACKET_ADJUST_IE 0x8C ++#define WUSB_MAX_IE 0x8C ++ ++/* Device Notification Types */ ++ ++#define WUSB_DN_MIN 0x01 ++#define WUSB_DN_CONNECT 0x01 ++# define WUSB_DA_OLDCONN 0x00 ++# define WUSB_DA_NEWCONN 0x01 ++# define WUSB_DA_SELF_BEACON 0x02 ++# define WUSB_DA_DIR_BEACON 0x04 ++# define WUSB_DA_NO_BEACON 0x06 ++#define WUSB_DN_DISCONNECT 0x02 ++#define WUSB_DN_EPRDY 0x03 ++#define WUSB_DN_MASAVAILCHANGED 0x04 ++#define WUSB_DN_REMOTEWAKEUP 0x05 ++#define WUSB_DN_SLEEP 0x06 ++#define WUSB_DN_ALIVE 0x07 ++#define WUSB_DN_MAX 0x07 ++ ++#ifdef _MSC_VER ++#include <pshpack1.h> ++#endif ++ ++/* WUSB Handshake Data. Used during the SET/GET HANDSHAKE requests */ ++typedef struct wusb_hndshk_data { ++ uByte bMessageNumber; ++ uByte bStatus; ++ uByte tTKID[3]; ++ uByte bReserved; ++ uByte CDID[16]; ++ uByte Nonce[16]; ++ uByte MIC[8]; ++} UPACKED wusb_hndshk_data_t; ++#define WUSB_HANDSHAKE_LEN_FOR_MIC 38 ++ ++/* WUSB Connection Context */ ++typedef struct wusb_conn_context { ++ uByte CHID [16]; ++ uByte CDID [16]; ++ uByte CK [16]; ++} UPACKED wusb_conn_context_t; ++ ++/* WUSB Security Descriptor */ ++typedef struct wusb_security_desc { ++ uByte bLength; ++ uByte bDescriptorType; ++ uWord wTotalLength; ++ uByte bNumEncryptionTypes; ++} UPACKED wusb_security_desc_t; ++ ++/* WUSB Encryption Type Descriptor */ ++typedef struct wusb_encrypt_type_desc { ++ uByte bLength; ++ uByte bDescriptorType; ++ ++ uByte bEncryptionType; ++#define WUETD_UNSECURE 0 ++#define WUETD_WIRED 1 ++#define WUETD_CCM_1 2 ++#define WUETD_RSA_1 3 ++ ++ uByte bEncryptionValue; ++ uByte bAuthKeyIndex; ++} UPACKED wusb_encrypt_type_desc_t; ++ ++/* WUSB Key Descriptor */ ++typedef struct wusb_key_desc { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte tTKID[3]; ++ uByte bReserved; ++ uByte KeyData[1]; /* variable length */ ++} UPACKED wusb_key_desc_t; ++ ++/* WUSB BOS Descriptor (Binary device Object Store) */ ++typedef struct wusb_bos_desc { ++ uByte bLength; ++ uByte bDescriptorType; ++ uWord wTotalLength; ++ uByte bNumDeviceCaps; ++} UPACKED wusb_bos_desc_t; ++ ++#define USB_DEVICE_CAPABILITY_20_EXTENSION 0x02 ++typedef struct usb_dev_cap_20_ext_desc { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bDevCapabilityType; ++#define USB_20_EXT_LPM 0x02 ++ uDWord bmAttributes; ++} UPACKED usb_dev_cap_20_ext_desc_t; ++ ++#define USB_DEVICE_CAPABILITY_SS_USB 0x03 ++typedef struct usb_dev_cap_ss_usb { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bDevCapabilityType; ++#define USB_DC_SS_USB_LTM_CAPABLE 0x02 ++ uByte bmAttributes; ++#define USB_DC_SS_USB_SPEED_SUPPORT_LOW 0x01 ++#define USB_DC_SS_USB_SPEED_SUPPORT_FULL 0x02 ++#define USB_DC_SS_USB_SPEED_SUPPORT_HIGH 0x04 ++#define USB_DC_SS_USB_SPEED_SUPPORT_SS 0x08 ++ uWord wSpeedsSupported; ++ uByte bFunctionalitySupport; ++ uByte bU1DevExitLat; ++ uWord wU2DevExitLat; ++} UPACKED usb_dev_cap_ss_usb_t; ++ ++#define USB_DEVICE_CAPABILITY_CONTAINER_ID 0x04 ++typedef struct usb_dev_cap_container_id { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bDevCapabilityType; ++ uByte bReserved; ++ uByte containerID[16]; ++} UPACKED usb_dev_cap_container_id_t; ++ ++/* Device Capability Type Codes */ ++#define WUSB_DEVICE_CAPABILITY_WIRELESS_USB 0x01 ++ ++/* Device Capability Descriptor */ ++typedef struct wusb_dev_cap_desc { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bDevCapabilityType; ++ uByte caps[1]; /* Variable length */ ++} UPACKED wusb_dev_cap_desc_t; ++ ++/* Device Capability Descriptor */ ++typedef struct wusb_dev_cap_uwb_desc { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bDevCapabilityType; ++ uByte bmAttributes; ++ uWord wPHYRates; /* Bitmap */ ++ uByte bmTFITXPowerInfo; ++ uByte bmFFITXPowerInfo; ++ uWord bmBandGroup; ++ uByte bReserved; ++} UPACKED wusb_dev_cap_uwb_desc_t; ++ ++/* Wireless USB Endpoint Companion Descriptor */ ++typedef struct wusb_endpoint_companion_desc { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bMaxBurst; ++ uByte bMaxSequence; ++ uWord wMaxStreamDelay; ++ uWord wOverTheAirPacketSize; ++ uByte bOverTheAirInterval; ++ uByte bmCompAttributes; ++} UPACKED wusb_endpoint_companion_desc_t; ++ ++/* Wireless USB Numeric Association M1 Data Structure */ ++typedef struct wusb_m1_data { ++ uByte version; ++ uWord langId; ++ uByte deviceFriendlyNameLength; ++ uByte sha_256_m3[32]; ++ uByte deviceFriendlyName[256]; ++} UPACKED wusb_m1_data_t; ++ ++typedef struct wusb_m2_data { ++ uByte version; ++ uWord langId; ++ uByte hostFriendlyNameLength; ++ uByte pkh[384]; ++ uByte hostFriendlyName[256]; ++} UPACKED wusb_m2_data_t; ++ ++typedef struct wusb_m3_data { ++ uByte pkd[384]; ++ uByte nd; ++} UPACKED wusb_m3_data_t; ++ ++typedef struct wusb_m4_data { ++ uDWord _attributeTypeIdAndLength_1; ++ uWord associationTypeId; ++ ++ uDWord _attributeTypeIdAndLength_2; ++ uWord associationSubTypeId; ++ ++ uDWord _attributeTypeIdAndLength_3; ++ uDWord length; ++ ++ uDWord _attributeTypeIdAndLength_4; ++ uDWord associationStatus; ++ ++ uDWord _attributeTypeIdAndLength_5; ++ uByte chid[16]; ++ ++ uDWord _attributeTypeIdAndLength_6; ++ uByte cdid[16]; ++ ++ uDWord _attributeTypeIdAndLength_7; ++ uByte bandGroups[2]; ++} UPACKED wusb_m4_data_t; ++ ++#ifdef _MSC_VER ++#include <poppack.h> ++#endif ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* _USB_H_ */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/Makefile +@@ -0,0 +1,80 @@ ++# ++# Makefile for DWC_otg Highspeed USB controller driver ++# ++ ++ifneq ($(KERNELRELEASE),) ++ ++# Use the BUS_INTERFACE variable to compile the software for either ++# PCI(PCI_INTERFACE) or LM(LM_INTERFACE) bus. ++ifeq ($(BUS_INTERFACE),) ++# BUS_INTERFACE = -DPCI_INTERFACE ++# BUS_INTERFACE = -DLM_INTERFACE ++ BUS_INTERFACE = -DPLATFORM_INTERFACE ++endif ++ ++#EXTRA_CFLAGS += -DDEBUG ++#EXTRA_CFLAGS += -DDWC_OTG_DEBUGLEV=1 # reduce common debug msgs ++ ++# Use one of the following flags to compile the software in host-only or ++# device-only mode. ++#EXTRA_CFLAGS += -DDWC_HOST_ONLY ++#EXTRA_CFLAGS += -DDWC_DEVICE_ONLY ++ ++EXTRA_CFLAGS += -Dlinux -DDWC_HS_ELECT_TST ++#EXTRA_CFLAGS += -DDWC_EN_ISOC ++EXTRA_CFLAGS += -I$(obj)/../dwc_common_port ++#EXTRA_CFLAGS += -I$(PORTLIB) ++EXTRA_CFLAGS += -DDWC_LINUX ++EXTRA_CFLAGS += $(CFI) ++EXTRA_CFLAGS += $(BUS_INTERFACE) ++#EXTRA_CFLAGS += -DDWC_DEV_SRPCAP ++ ++obj-$(CONFIG_USB_DWCOTG) += dwc_otg.o ++ ++dwc_otg-objs := dwc_otg_driver.o dwc_otg_attr.o ++dwc_otg-objs += dwc_otg_cil.o dwc_otg_cil_intr.o ++dwc_otg-objs += dwc_otg_pcd_linux.o dwc_otg_pcd.o dwc_otg_pcd_intr.o ++dwc_otg-objs += dwc_otg_hcd.o dwc_otg_hcd_linux.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o dwc_otg_hcd_ddma.o ++dwc_otg-objs += dwc_otg_adp.o ++ifneq ($(CFI),) ++dwc_otg-objs += dwc_otg_cfi.o ++endif ++ ++kernrelwd := $(subst ., ,$(KERNELRELEASE)) ++kernrel3 := $(word 1,$(kernrelwd)).$(word 2,$(kernrelwd)).$(word 3,$(kernrelwd)) ++ ++ifneq ($(kernrel3),2.6.20) ++EXTRA_CFLAGS += $(CPPFLAGS) ++endif ++ ++else ++ ++PWD := $(shell pwd) ++PORTLIB := $(PWD)/../dwc_common_port ++ ++# Command paths ++CTAGS := $(CTAGS) ++DOXYGEN := $(DOXYGEN) ++ ++default: portlib ++ $(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules ++ ++install: default ++ $(MAKE) -C$(KDIR) M=$(PORTLIB) modules_install ++ $(MAKE) -C$(KDIR) M=$(PWD) modules_install ++ ++portlib: ++ $(MAKE) -C$(KDIR) M=$(PORTLIB) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules ++ cp $(PORTLIB)/Module.symvers $(PWD)/ ++ ++docs: $(wildcard *.[hc]) doc/doxygen.cfg ++ $(DOXYGEN) doc/doxygen.cfg ++ ++tags: $(wildcard *.[hc]) ++ $(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h) ++ ++ ++clean: ++ rm -rf *.o *.ko .*cmd *.mod.c .tmp_versions Module.symvers ++ ++endif +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/doc/doxygen.cfg +@@ -0,0 +1,224 @@ ++# Doxyfile 1.3.9.1 ++ ++#--------------------------------------------------------------------------- ++# Project related configuration options ++#--------------------------------------------------------------------------- ++PROJECT_NAME = "DesignWare USB 2.0 OTG Controller (DWC_otg) Device Driver" ++PROJECT_NUMBER = v3.00a ++OUTPUT_DIRECTORY = ./doc/ ++CREATE_SUBDIRS = NO ++OUTPUT_LANGUAGE = English ++BRIEF_MEMBER_DESC = YES ++REPEAT_BRIEF = YES ++ABBREVIATE_BRIEF = "The $name class" \ ++ "The $name widget" \ ++ "The $name file" \ ++ is \ ++ provides \ ++ specifies \ ++ contains \ ++ represents \ ++ a \ ++ an \ ++ the ++ALWAYS_DETAILED_SEC = NO ++INLINE_INHERITED_MEMB = NO ++FULL_PATH_NAMES = NO ++STRIP_FROM_PATH = ++STRIP_FROM_INC_PATH = ++SHORT_NAMES = NO ++JAVADOC_AUTOBRIEF = YES ++MULTILINE_CPP_IS_BRIEF = NO ++INHERIT_DOCS = YES ++DISTRIBUTE_GROUP_DOC = NO ++TAB_SIZE = 8 ++ALIASES = ++OPTIMIZE_OUTPUT_FOR_C = YES ++OPTIMIZE_OUTPUT_JAVA = NO ++SUBGROUPING = YES ++#--------------------------------------------------------------------------- ++# Build related configuration options ++#--------------------------------------------------------------------------- ++EXTRACT_ALL = NO ++EXTRACT_PRIVATE = YES ++EXTRACT_STATIC = YES ++EXTRACT_LOCAL_CLASSES = YES ++EXTRACT_LOCAL_METHODS = NO ++HIDE_UNDOC_MEMBERS = NO ++HIDE_UNDOC_CLASSES = NO ++HIDE_FRIEND_COMPOUNDS = NO ++HIDE_IN_BODY_DOCS = NO ++INTERNAL_DOCS = NO ++CASE_SENSE_NAMES = NO ++HIDE_SCOPE_NAMES = NO ++SHOW_INCLUDE_FILES = YES ++INLINE_INFO = YES ++SORT_MEMBER_DOCS = NO ++SORT_BRIEF_DOCS = NO ++SORT_BY_SCOPE_NAME = NO ++GENERATE_TODOLIST = YES ++GENERATE_TESTLIST = YES ++GENERATE_BUGLIST = YES ++GENERATE_DEPRECATEDLIST= YES ++ENABLED_SECTIONS = ++MAX_INITIALIZER_LINES = 30 ++SHOW_USED_FILES = YES ++SHOW_DIRECTORIES = YES ++#--------------------------------------------------------------------------- ++# configuration options related to warning and progress messages ++#--------------------------------------------------------------------------- ++QUIET = YES ++WARNINGS = YES ++WARN_IF_UNDOCUMENTED = NO ++WARN_IF_DOC_ERROR = YES ++WARN_FORMAT = "$file:$line: $text" ++WARN_LOGFILE = ++#--------------------------------------------------------------------------- ++# configuration options related to the input files ++#--------------------------------------------------------------------------- ++INPUT = . ++FILE_PATTERNS = *.c \ ++ *.h \ ++ ./linux/*.c \ ++ ./linux/*.h ++RECURSIVE = NO ++EXCLUDE = ./test/ \ ++ ./dwc_otg/.AppleDouble/ ++EXCLUDE_SYMLINKS = YES ++EXCLUDE_PATTERNS = *.mod.* ++EXAMPLE_PATH = ++EXAMPLE_PATTERNS = * ++EXAMPLE_RECURSIVE = NO ++IMAGE_PATH = ++INPUT_FILTER = ++FILTER_PATTERNS = ++FILTER_SOURCE_FILES = NO ++#--------------------------------------------------------------------------- ++# configuration options related to source browsing ++#--------------------------------------------------------------------------- ++SOURCE_BROWSER = YES ++INLINE_SOURCES = NO ++STRIP_CODE_COMMENTS = YES ++REFERENCED_BY_RELATION = NO ++REFERENCES_RELATION = NO ++VERBATIM_HEADERS = NO ++#--------------------------------------------------------------------------- ++# configuration options related to the alphabetical class index ++#--------------------------------------------------------------------------- ++ALPHABETICAL_INDEX = NO ++COLS_IN_ALPHA_INDEX = 5 ++IGNORE_PREFIX = ++#--------------------------------------------------------------------------- ++# configuration options related to the HTML output ++#--------------------------------------------------------------------------- ++GENERATE_HTML = YES ++HTML_OUTPUT = html ++HTML_FILE_EXTENSION = .html ++HTML_HEADER = ++HTML_FOOTER = ++HTML_STYLESHEET = ++HTML_ALIGN_MEMBERS = YES ++GENERATE_HTMLHELP = NO ++CHM_FILE = ++HHC_LOCATION = ++GENERATE_CHI = NO ++BINARY_TOC = NO ++TOC_EXPAND = NO ++DISABLE_INDEX = NO ++ENUM_VALUES_PER_LINE = 4 ++GENERATE_TREEVIEW = YES ++TREEVIEW_WIDTH = 250 ++#--------------------------------------------------------------------------- ++# configuration options related to the LaTeX output ++#--------------------------------------------------------------------------- ++GENERATE_LATEX = NO ++LATEX_OUTPUT = latex ++LATEX_CMD_NAME = latex ++MAKEINDEX_CMD_NAME = makeindex ++COMPACT_LATEX = NO ++PAPER_TYPE = a4wide ++EXTRA_PACKAGES = ++LATEX_HEADER = ++PDF_HYPERLINKS = NO ++USE_PDFLATEX = NO ++LATEX_BATCHMODE = NO ++LATEX_HIDE_INDICES = NO ++#--------------------------------------------------------------------------- ++# configuration options related to the RTF output ++#--------------------------------------------------------------------------- ++GENERATE_RTF = NO ++RTF_OUTPUT = rtf ++COMPACT_RTF = NO ++RTF_HYPERLINKS = NO ++RTF_STYLESHEET_FILE = ++RTF_EXTENSIONS_FILE = ++#--------------------------------------------------------------------------- ++# configuration options related to the man page output ++#--------------------------------------------------------------------------- ++GENERATE_MAN = NO ++MAN_OUTPUT = man ++MAN_EXTENSION = .3 ++MAN_LINKS = NO ++#--------------------------------------------------------------------------- ++# configuration options related to the XML output ++#--------------------------------------------------------------------------- ++GENERATE_XML = NO ++XML_OUTPUT = xml ++XML_SCHEMA = ++XML_DTD = ++XML_PROGRAMLISTING = YES ++#--------------------------------------------------------------------------- ++# configuration options for the AutoGen Definitions output ++#--------------------------------------------------------------------------- ++GENERATE_AUTOGEN_DEF = NO ++#--------------------------------------------------------------------------- ++# configuration options related to the Perl module output ++#--------------------------------------------------------------------------- ++GENERATE_PERLMOD = NO ++PERLMOD_LATEX = NO ++PERLMOD_PRETTY = YES ++PERLMOD_MAKEVAR_PREFIX = ++#--------------------------------------------------------------------------- ++# Configuration options related to the preprocessor ++#--------------------------------------------------------------------------- ++ENABLE_PREPROCESSING = YES ++MACRO_EXPANSION = YES ++EXPAND_ONLY_PREDEF = YES ++SEARCH_INCLUDES = YES ++INCLUDE_PATH = ++INCLUDE_FILE_PATTERNS = ++PREDEFINED = DEVICE_ATTR DWC_EN_ISOC ++EXPAND_AS_DEFINED = DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW DWC_OTG_DEVICE_ATTR_BITFIELD_STORE DWC_OTG_DEVICE_ATTR_BITFIELD_RW DWC_OTG_DEVICE_ATTR_BITFIELD_RO DWC_OTG_DEVICE_ATTR_REG_SHOW DWC_OTG_DEVICE_ATTR_REG_STORE DWC_OTG_DEVICE_ATTR_REG32_RW DWC_OTG_DEVICE_ATTR_REG32_RO DWC_EN_ISOC ++SKIP_FUNCTION_MACROS = NO ++#--------------------------------------------------------------------------- ++# Configuration::additions related to external references ++#--------------------------------------------------------------------------- ++TAGFILES = ++GENERATE_TAGFILE = ++ALLEXTERNALS = NO ++EXTERNAL_GROUPS = YES ++PERL_PATH = /usr/bin/perl ++#--------------------------------------------------------------------------- ++# Configuration options related to the dot tool ++#--------------------------------------------------------------------------- ++CLASS_DIAGRAMS = YES ++HIDE_UNDOC_RELATIONS = YES ++HAVE_DOT = NO ++CLASS_GRAPH = YES ++COLLABORATION_GRAPH = YES ++UML_LOOK = NO ++TEMPLATE_RELATIONS = NO ++INCLUDE_GRAPH = YES ++INCLUDED_BY_GRAPH = YES ++CALL_GRAPH = NO ++GRAPHICAL_HIERARCHY = YES ++DOT_IMAGE_FORMAT = png ++DOT_PATH = ++DOTFILE_DIRS = ++MAX_DOT_GRAPH_DEPTH = 1000 ++GENERATE_LEGEND = YES ++DOT_CLEANUP = YES ++#--------------------------------------------------------------------------- ++# Configuration::additions related to the search engine ++#--------------------------------------------------------------------------- ++SEARCHENGINE = NO +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dummy_audio.c +@@ -0,0 +1,1575 @@ ++/* ++ * zero.c -- Gadget Zero, for USB development ++ * ++ * Copyright (C) 2003-2004 David Brownell ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions, and the following disclaimer, ++ * without modification. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The names of the above-listed copyright holders may not be used ++ * to endorse or promote products derived from this software without ++ * specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS ++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++ ++/* ++ * Gadget Zero only needs two bulk endpoints, and is an example of how you ++ * can write a hardware-agnostic gadget driver running inside a USB device. ++ * ++ * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't ++ * affect most of the driver. ++ * ++ * Use it with the Linux host/master side "usbtest" driver to get a basic ++ * functional test of your device-side usb stack, or with "usb-skeleton". ++ * ++ * It supports two similar configurations. One sinks whatever the usb host ++ * writes, and in return sources zeroes. The other loops whatever the host ++ * writes back, so the host can read it. Module options include: ++ * ++ * buflen=N default N=4096, buffer size used ++ * qlen=N default N=32, how many buffers in the loopback queue ++ * loopdefault default false, list loopback config first ++ * ++ * Many drivers will only have one configuration, letting them be much ++ * simpler if they also don't support high speed operation (like this ++ * driver does). ++ */ ++ ++#include <linux/config.h> ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/delay.h> ++#include <linux/ioport.h> ++#include <linux/sched.h> ++#include <linux/slab.h> ++#include <linux/smp_lock.h> ++#include <linux/errno.h> ++#include <linux/init.h> ++#include <linux/timer.h> ++#include <linux/list.h> ++#include <linux/interrupt.h> ++#include <linux/uts.h> ++#include <linux/version.h> ++#include <linux/device.h> ++#include <linux/moduleparam.h> ++#include <linux/proc_fs.h> ++ ++#include <asm/byteorder.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/system.h> ++#include <asm/unaligned.h> ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) ++# include <linux/usb/ch9.h> ++#else ++# include <linux/usb_ch9.h> ++#endif ++ ++#include <linux/usb_gadget.h> ++ ++ ++/*-------------------------------------------------------------------------*/ ++/*-------------------------------------------------------------------------*/ ++ ++ ++static int utf8_to_utf16le(const char *s, u16 *cp, unsigned len) ++{ ++ int count = 0; ++ u8 c; ++ u16 uchar; ++ ++ /* this insists on correct encodings, though not minimal ones. ++ * BUT it currently rejects legit 4-byte UTF-8 code points, ++ * which need surrogate pairs. (Unicode 3.1 can use them.) ++ */ ++ while (len != 0 && (c = (u8) *s++) != 0) { ++ if (unlikely(c & 0x80)) { ++ // 2-byte sequence: ++ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx ++ if ((c & 0xe0) == 0xc0) { ++ uchar = (c & 0x1f) << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ // 3-byte sequence (most CJKV characters): ++ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx ++ } else if ((c & 0xf0) == 0xe0) { ++ uchar = (c & 0x0f) << 12; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ /* no bogus surrogates */ ++ if (0xd800 <= uchar && uchar <= 0xdfff) ++ goto fail; ++ ++ // 4-byte sequence (surrogate pairs, currently rare): ++ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx ++ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx ++ // (uuuuu = wwww + 1) ++ // FIXME accept the surrogate code points (only) ++ ++ } else ++ goto fail; ++ } else ++ uchar = c; ++ put_unaligned (cpu_to_le16 (uchar), cp++); ++ count++; ++ len--; ++ } ++ return count; ++fail: ++ return -1; ++} ++ ++ ++/** ++ * usb_gadget_get_string - fill out a string descriptor ++ * @table: of c strings encoded using UTF-8 ++ * @id: string id, from low byte of wValue in get string descriptor ++ * @buf: at least 256 bytes ++ * ++ * Finds the UTF-8 string matching the ID, and converts it into a ++ * string descriptor in utf16-le. ++ * Returns length of descriptor (always even) or negative errno ++ * ++ * If your driver needs stings in multiple languages, you'll probably ++ * "switch (wIndex) { ... }" in your ep0 string descriptor logic, ++ * using this routine after choosing which set of UTF-8 strings to use. ++ * Note that US-ASCII is a strict subset of UTF-8; any string bytes with ++ * the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1 ++ * characters (which are also widely used in C strings). ++ */ ++int ++usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf) ++{ ++ struct usb_string *s; ++ int len; ++ ++ /* descriptor 0 has the language id */ ++ if (id == 0) { ++ buf [0] = 4; ++ buf [1] = USB_DT_STRING; ++ buf [2] = (u8) table->language; ++ buf [3] = (u8) (table->language >> 8); ++ return 4; ++ } ++ for (s = table->strings; s && s->s; s++) ++ if (s->id == id) ++ break; ++ ++ /* unrecognized: stall. */ ++ if (!s || !s->s) ++ return -EINVAL; ++ ++ /* string descriptors have length, tag, then UTF16-LE text */ ++ len = min ((size_t) 126, strlen (s->s)); ++ memset (buf + 2, 0, 2 * len); /* zero all the bytes */ ++ len = utf8_to_utf16le(s->s, (u16 *)&buf[2], len); ++ if (len < 0) ++ return -EINVAL; ++ buf [0] = (len + 1) * 2; ++ buf [1] = USB_DT_STRING; ++ return buf [0]; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++/*-------------------------------------------------------------------------*/ ++ ++ ++/** ++ * usb_descriptor_fillbuf - fill buffer with descriptors ++ * @buf: Buffer to be filled ++ * @buflen: Size of buf ++ * @src: Array of descriptor pointers, terminated by null pointer. ++ * ++ * Copies descriptors into the buffer, returning the length or a ++ * negative error code if they can't all be copied. Useful when ++ * assembling descriptors for an associated set of interfaces used ++ * as part of configuring a composite device; or in other cases where ++ * sets of descriptors need to be marshaled. ++ */ ++int ++usb_descriptor_fillbuf(void *buf, unsigned buflen, ++ const struct usb_descriptor_header **src) ++{ ++ u8 *dest = buf; ++ ++ if (!src) ++ return -EINVAL; ++ ++ /* fill buffer from src[] until null descriptor ptr */ ++ for (; 0 != *src; src++) { ++ unsigned len = (*src)->bLength; ++ ++ if (len > buflen) ++ return -EINVAL; ++ memcpy(dest, *src, len); ++ buflen -= len; ++ dest += len; ++ } ++ return dest - (u8 *)buf; ++} ++ ++ ++/** ++ * usb_gadget_config_buf - builts a complete configuration descriptor ++ * @config: Header for the descriptor, including characteristics such ++ * as power requirements and number of interfaces. ++ * @desc: Null-terminated vector of pointers to the descriptors (interface, ++ * endpoint, etc) defining all functions in this device configuration. ++ * @buf: Buffer for the resulting configuration descriptor. ++ * @length: Length of buffer. If this is not big enough to hold the ++ * entire configuration descriptor, an error code will be returned. ++ * ++ * This copies descriptors into the response buffer, building a descriptor ++ * for that configuration. It returns the buffer length or a negative ++ * status code. The config.wTotalLength field is set to match the length ++ * of the result, but other descriptor fields (including power usage and ++ * interface count) must be set by the caller. ++ * ++ * Gadget drivers could use this when constructing a config descriptor ++ * in response to USB_REQ_GET_DESCRIPTOR. They will need to patch the ++ * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed. ++ */ ++int usb_gadget_config_buf( ++ const struct usb_config_descriptor *config, ++ void *buf, ++ unsigned length, ++ const struct usb_descriptor_header **desc ++) ++{ ++ struct usb_config_descriptor *cp = buf; ++ int len; ++ ++ /* config descriptor first */ ++ if (length < USB_DT_CONFIG_SIZE || !desc) ++ return -EINVAL; ++ *cp = *config; ++ ++ /* then interface/endpoint/class/vendor/... */ ++ len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf, ++ length - USB_DT_CONFIG_SIZE, desc); ++ if (len < 0) ++ return len; ++ len += USB_DT_CONFIG_SIZE; ++ if (len > 0xffff) ++ return -EINVAL; ++ ++ /* patch up the config descriptor */ ++ cp->bLength = USB_DT_CONFIG_SIZE; ++ cp->bDescriptorType = USB_DT_CONFIG; ++ cp->wTotalLength = cpu_to_le16(len); ++ cp->bmAttributes |= USB_CONFIG_ATT_ONE; ++ return len; ++} ++ ++/*-------------------------------------------------------------------------*/ ++/*-------------------------------------------------------------------------*/ ++ ++ ++#define RBUF_LEN (1024*1024) ++static int rbuf_start; ++static int rbuf_len; ++static __u8 rbuf[RBUF_LEN]; ++ ++/*-------------------------------------------------------------------------*/ ++ ++#define DRIVER_VERSION "St Patrick's Day 2004" ++ ++static const char shortname [] = "zero"; ++static const char longname [] = "YAMAHA YST-MS35D USB Speaker "; ++ ++static const char source_sink [] = "source and sink data"; ++static const char loopback [] = "loop input to output"; ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * driver assumes self-powered hardware, and ++ * has no way for users to trigger remote wakeup. ++ * ++ * this version autoconfigures as much as possible, ++ * which is reasonable for most "bulk-only" drivers. ++ */ ++static const char *EP_IN_NAME; /* source */ ++static const char *EP_OUT_NAME; /* sink */ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* big enough to hold our biggest descriptor */ ++#define USB_BUFSIZ 512 ++ ++struct zero_dev { ++ spinlock_t lock; ++ struct usb_gadget *gadget; ++ struct usb_request *req; /* for control responses */ ++ ++ /* when configured, we have one of two configs: ++ * - source data (in to host) and sink it (out from host) ++ * - or loop it back (out from host back in to host) ++ */ ++ u8 config; ++ struct usb_ep *in_ep, *out_ep; ++ ++ /* autoresume timer */ ++ struct timer_list resume; ++}; ++ ++#define xprintk(d,level,fmt,args...) \ ++ dev_printk(level , &(d)->gadget->dev , fmt , ## args) ++ ++#ifdef DEBUG ++#define DBG(dev,fmt,args...) \ ++ xprintk(dev , KERN_DEBUG , fmt , ## args) ++#else ++#define DBG(dev,fmt,args...) \ ++ do { } while (0) ++#endif /* DEBUG */ ++ ++#ifdef VERBOSE ++#define VDBG DBG ++#else ++#define VDBG(dev,fmt,args...) \ ++ do { } while (0) ++#endif /* VERBOSE */ ++ ++#define ERROR(dev,fmt,args...) \ ++ xprintk(dev , KERN_ERR , fmt , ## args) ++#define WARN(dev,fmt,args...) \ ++ xprintk(dev , KERN_WARNING , fmt , ## args) ++#define INFO(dev,fmt,args...) \ ++ xprintk(dev , KERN_INFO , fmt , ## args) ++ ++/*-------------------------------------------------------------------------*/ ++ ++static unsigned buflen = 4096; ++static unsigned qlen = 32; ++static unsigned pattern = 0; ++ ++module_param (buflen, uint, S_IRUGO|S_IWUSR); ++module_param (qlen, uint, S_IRUGO|S_IWUSR); ++module_param (pattern, uint, S_IRUGO|S_IWUSR); ++ ++/* ++ * if it's nonzero, autoresume says how many seconds to wait ++ * before trying to wake up the host after suspend. ++ */ ++static unsigned autoresume = 0; ++module_param (autoresume, uint, 0); ++ ++/* ++ * Normally the "loopback" configuration is second (index 1) so ++ * it's not the default. Here's where to change that order, to ++ * work better with hosts where config changes are problematic. ++ * Or controllers (like superh) that only support one config. ++ */ ++static int loopdefault = 0; ++ ++module_param (loopdefault, bool, S_IRUGO|S_IWUSR); ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* Thanks to NetChip Technologies for donating this product ID. ++ * ++ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! ++ * Instead: allocate your own, using normal USB-IF procedures. ++ */ ++#ifndef CONFIG_USB_ZERO_HNPTEST ++#define DRIVER_VENDOR_NUM 0x0525 /* NetChip */ ++#define DRIVER_PRODUCT_NUM 0xa4a0 /* Linux-USB "Gadget Zero" */ ++#else ++#define DRIVER_VENDOR_NUM 0x1a0a /* OTG test device IDs */ ++#define DRIVER_PRODUCT_NUM 0xbadd ++#endif ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * DESCRIPTORS ... most are static, but strings and (full) ++ * configuration descriptors are built on demand. ++ */ ++ ++/* ++#define STRING_MANUFACTURER 25 ++#define STRING_PRODUCT 42 ++#define STRING_SERIAL 101 ++*/ ++#define STRING_MANUFACTURER 1 ++#define STRING_PRODUCT 2 ++#define STRING_SERIAL 3 ++ ++#define STRING_SOURCE_SINK 250 ++#define STRING_LOOPBACK 251 ++ ++/* ++ * This device advertises two configurations; these numbers work ++ * on a pxa250 as well as more flexible hardware. ++ */ ++#define CONFIG_SOURCE_SINK 3 ++#define CONFIG_LOOPBACK 2 ++ ++/* ++static struct usb_device_descriptor ++device_desc = { ++ .bLength = sizeof device_desc, ++ .bDescriptorType = USB_DT_DEVICE, ++ ++ .bcdUSB = __constant_cpu_to_le16 (0x0200), ++ .bDeviceClass = USB_CLASS_VENDOR_SPEC, ++ ++ .idVendor = __constant_cpu_to_le16 (DRIVER_VENDOR_NUM), ++ .idProduct = __constant_cpu_to_le16 (DRIVER_PRODUCT_NUM), ++ .iManufacturer = STRING_MANUFACTURER, ++ .iProduct = STRING_PRODUCT, ++ .iSerialNumber = STRING_SERIAL, ++ .bNumConfigurations = 2, ++}; ++*/ ++static struct usb_device_descriptor ++device_desc = { ++ .bLength = sizeof device_desc, ++ .bDescriptorType = USB_DT_DEVICE, ++ .bcdUSB = __constant_cpu_to_le16 (0x0100), ++ .bDeviceClass = USB_CLASS_PER_INTERFACE, ++ .bDeviceSubClass = 0, ++ .bDeviceProtocol = 0, ++ .bMaxPacketSize0 = 64, ++ .bcdDevice = __constant_cpu_to_le16 (0x0100), ++ .idVendor = __constant_cpu_to_le16 (0x0499), ++ .idProduct = __constant_cpu_to_le16 (0x3002), ++ .iManufacturer = STRING_MANUFACTURER, ++ .iProduct = STRING_PRODUCT, ++ .iSerialNumber = STRING_SERIAL, ++ .bNumConfigurations = 1, ++}; ++ ++static struct usb_config_descriptor ++z_config = { ++ .bLength = sizeof z_config, ++ .bDescriptorType = USB_DT_CONFIG, ++ ++ /* compute wTotalLength on the fly */ ++ .bNumInterfaces = 2, ++ .bConfigurationValue = 1, ++ .iConfiguration = 0, ++ .bmAttributes = 0x40, ++ .bMaxPower = 0, /* self-powered */ ++}; ++ ++ ++static struct usb_otg_descriptor ++otg_descriptor = { ++ .bLength = sizeof otg_descriptor, ++ .bDescriptorType = USB_DT_OTG, ++ ++ .bmAttributes = USB_OTG_SRP, ++}; ++ ++/* one interface in each configuration */ ++#ifdef CONFIG_USB_GADGET_DUALSPEED ++ ++/* ++ * usb 2.0 devices need to expose both high speed and full speed ++ * descriptors, unless they only run at full speed. ++ * ++ * that means alternate endpoint descriptors (bigger packets) ++ * and a "device qualifier" ... plus more construction options ++ * for the config descriptor. ++ */ ++ ++static struct usb_qualifier_descriptor ++dev_qualifier = { ++ .bLength = sizeof dev_qualifier, ++ .bDescriptorType = USB_DT_DEVICE_QUALIFIER, ++ ++ .bcdUSB = __constant_cpu_to_le16 (0x0200), ++ .bDeviceClass = USB_CLASS_VENDOR_SPEC, ++ ++ .bNumConfigurations = 2, ++}; ++ ++ ++struct usb_cs_as_general_descriptor { ++ __u8 bLength; ++ __u8 bDescriptorType; ++ ++ __u8 bDescriptorSubType; ++ __u8 bTerminalLink; ++ __u8 bDelay; ++ __u16 wFormatTag; ++} __attribute__ ((packed)); ++ ++struct usb_cs_as_format_descriptor { ++ __u8 bLength; ++ __u8 bDescriptorType; ++ ++ __u8 bDescriptorSubType; ++ __u8 bFormatType; ++ __u8 bNrChannels; ++ __u8 bSubframeSize; ++ __u8 bBitResolution; ++ __u8 bSamfreqType; ++ __u8 tLowerSamFreq[3]; ++ __u8 tUpperSamFreq[3]; ++} __attribute__ ((packed)); ++ ++static const struct usb_interface_descriptor ++z_audio_control_if_desc = { ++ .bLength = sizeof z_audio_control_if_desc, ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 0, ++ .bAlternateSetting = 0, ++ .bNumEndpoints = 0, ++ .bInterfaceClass = USB_CLASS_AUDIO, ++ .bInterfaceSubClass = 0x1, ++ .bInterfaceProtocol = 0, ++ .iInterface = 0, ++}; ++ ++static const struct usb_interface_descriptor ++z_audio_if_desc = { ++ .bLength = sizeof z_audio_if_desc, ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 1, ++ .bAlternateSetting = 0, ++ .bNumEndpoints = 0, ++ .bInterfaceClass = USB_CLASS_AUDIO, ++ .bInterfaceSubClass = 0x2, ++ .bInterfaceProtocol = 0, ++ .iInterface = 0, ++}; ++ ++static const struct usb_interface_descriptor ++z_audio_if_desc2 = { ++ .bLength = sizeof z_audio_if_desc, ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 1, ++ .bAlternateSetting = 1, ++ .bNumEndpoints = 1, ++ .bInterfaceClass = USB_CLASS_AUDIO, ++ .bInterfaceSubClass = 0x2, ++ .bInterfaceProtocol = 0, ++ .iInterface = 0, ++}; ++ ++static const struct usb_cs_as_general_descriptor ++z_audio_cs_as_if_desc = { ++ .bLength = 7, ++ .bDescriptorType = 0x24, ++ ++ .bDescriptorSubType = 0x01, ++ .bTerminalLink = 0x01, ++ .bDelay = 0x0, ++ .wFormatTag = __constant_cpu_to_le16 (0x0001) ++}; ++ ++ ++static const struct usb_cs_as_format_descriptor ++z_audio_cs_as_format_desc = { ++ .bLength = 0xe, ++ .bDescriptorType = 0x24, ++ ++ .bDescriptorSubType = 2, ++ .bFormatType = 1, ++ .bNrChannels = 1, ++ .bSubframeSize = 1, ++ .bBitResolution = 8, ++ .bSamfreqType = 0, ++ .tLowerSamFreq = {0x7e, 0x13, 0x00}, ++ .tUpperSamFreq = {0xe2, 0xd6, 0x00}, ++}; ++ ++static const struct usb_endpoint_descriptor ++z_iso_ep = { ++ .bLength = 0x09, ++ .bDescriptorType = 0x05, ++ .bEndpointAddress = 0x04, ++ .bmAttributes = 0x09, ++ .wMaxPacketSize = 0x0038, ++ .bInterval = 0x01, ++ .bRefresh = 0x00, ++ .bSynchAddress = 0x00, ++}; ++ ++static char z_iso_ep2[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++// 9 bytes ++static char z_ac_interface_header_desc[] = ++{ 0x09, 0x24, 0x01, 0x00, 0x01, 0x2b, 0x00, 0x01, 0x01 }; ++ ++// 12 bytes ++static char z_0[] = {0x0c, 0x24, 0x02, 0x01, 0x01, 0x01, 0x00, 0x02, ++ 0x03, 0x00, 0x00, 0x00}; ++// 13 bytes ++static char z_1[] = {0x0d, 0x24, 0x06, 0x02, 0x01, 0x02, 0x15, 0x00, ++ 0x02, 0x00, 0x02, 0x00, 0x00}; ++// 9 bytes ++static char z_2[] = {0x09, 0x24, 0x03, 0x03, 0x01, 0x03, 0x00, 0x02, ++ 0x00}; ++ ++static char za_0[] = {0x09, 0x04, 0x01, 0x02, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_1[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_2[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x01, 0x08, 0x00, ++ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_3[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00, ++ 0x00}; ++ ++static char za_4[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++static char za_5[] = {0x09, 0x04, 0x01, 0x03, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_6[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_7[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x02, 0x10, 0x00, ++ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_8[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00, ++ 0x00}; ++ ++static char za_9[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++static char za_10[] = {0x09, 0x04, 0x01, 0x04, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_11[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_12[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x02, 0x10, 0x00, ++ 0x73, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_13[] = {0x09, 0x05, 0x04, 0x09, 0xe0, 0x00, 0x01, 0x00, ++ 0x00}; ++ ++static char za_14[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++static char za_15[] = {0x09, 0x04, 0x01, 0x05, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_16[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_17[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x03, 0x14, 0x00, ++ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_18[] = {0x09, 0x05, 0x04, 0x09, 0xa8, 0x00, 0x01, 0x00, ++ 0x00}; ++ ++static char za_19[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++static char za_20[] = {0x09, 0x04, 0x01, 0x06, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_21[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_22[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x03, 0x14, 0x00, ++ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_23[] = {0x09, 0x05, 0x04, 0x09, 0x50, 0x01, 0x01, 0x00, ++ 0x00}; ++ ++static char za_24[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++ ++ ++static const struct usb_descriptor_header *z_function [] = { ++ (struct usb_descriptor_header *) &z_audio_control_if_desc, ++ (struct usb_descriptor_header *) &z_ac_interface_header_desc, ++ (struct usb_descriptor_header *) &z_0, ++ (struct usb_descriptor_header *) &z_1, ++ (struct usb_descriptor_header *) &z_2, ++ (struct usb_descriptor_header *) &z_audio_if_desc, ++ (struct usb_descriptor_header *) &z_audio_if_desc2, ++ (struct usb_descriptor_header *) &z_audio_cs_as_if_desc, ++ (struct usb_descriptor_header *) &z_audio_cs_as_format_desc, ++ (struct usb_descriptor_header *) &z_iso_ep, ++ (struct usb_descriptor_header *) &z_iso_ep2, ++ (struct usb_descriptor_header *) &za_0, ++ (struct usb_descriptor_header *) &za_1, ++ (struct usb_descriptor_header *) &za_2, ++ (struct usb_descriptor_header *) &za_3, ++ (struct usb_descriptor_header *) &za_4, ++ (struct usb_descriptor_header *) &za_5, ++ (struct usb_descriptor_header *) &za_6, ++ (struct usb_descriptor_header *) &za_7, ++ (struct usb_descriptor_header *) &za_8, ++ (struct usb_descriptor_header *) &za_9, ++ (struct usb_descriptor_header *) &za_10, ++ (struct usb_descriptor_header *) &za_11, ++ (struct usb_descriptor_header *) &za_12, ++ (struct usb_descriptor_header *) &za_13, ++ (struct usb_descriptor_header *) &za_14, ++ (struct usb_descriptor_header *) &za_15, ++ (struct usb_descriptor_header *) &za_16, ++ (struct usb_descriptor_header *) &za_17, ++ (struct usb_descriptor_header *) &za_18, ++ (struct usb_descriptor_header *) &za_19, ++ (struct usb_descriptor_header *) &za_20, ++ (struct usb_descriptor_header *) &za_21, ++ (struct usb_descriptor_header *) &za_22, ++ (struct usb_descriptor_header *) &za_23, ++ (struct usb_descriptor_header *) &za_24, ++ NULL, ++}; ++ ++/* maxpacket and other transfer characteristics vary by speed. */ ++#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs)) ++ ++#else ++ ++/* if there's no high speed support, maxpacket doesn't change. */ ++#define ep_desc(g,hs,fs) fs ++ ++#endif /* !CONFIG_USB_GADGET_DUALSPEED */ ++ ++static char manufacturer [40]; ++//static char serial [40]; ++static char serial [] = "Ser 00 em"; ++ ++/* static strings, in UTF-8 */ ++static struct usb_string strings [] = { ++ { STRING_MANUFACTURER, manufacturer, }, ++ { STRING_PRODUCT, longname, }, ++ { STRING_SERIAL, serial, }, ++ { STRING_LOOPBACK, loopback, }, ++ { STRING_SOURCE_SINK, source_sink, }, ++ { } /* end of list */ ++}; ++ ++static struct usb_gadget_strings stringtab = { ++ .language = 0x0409, /* en-us */ ++ .strings = strings, ++}; ++ ++/* ++ * config descriptors are also handcrafted. these must agree with code ++ * that sets configurations, and with code managing interfaces and their ++ * altsettings. other complexity may come from: ++ * ++ * - high speed support, including "other speed config" rules ++ * - multiple configurations ++ * - interfaces with alternate settings ++ * - embedded class or vendor-specific descriptors ++ * ++ * this handles high speed, and has a second config that could as easily ++ * have been an alternate interface setting (on most hardware). ++ * ++ * NOTE: to demonstrate (and test) more USB capabilities, this driver ++ * should include an altsetting to test interrupt transfers, including ++ * high bandwidth modes at high speed. (Maybe work like Intel's test ++ * device?) ++ */ ++static int ++config_buf (struct usb_gadget *gadget, u8 *buf, u8 type, unsigned index) ++{ ++ int len; ++ const struct usb_descriptor_header **function; ++ ++ function = z_function; ++ len = usb_gadget_config_buf (&z_config, buf, USB_BUFSIZ, function); ++ if (len < 0) ++ return len; ++ ((struct usb_config_descriptor *) buf)->bDescriptorType = type; ++ return len; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static struct usb_request * ++alloc_ep_req (struct usb_ep *ep, unsigned length) ++{ ++ struct usb_request *req; ++ ++ req = usb_ep_alloc_request (ep, GFP_ATOMIC); ++ if (req) { ++ req->length = length; ++ req->buf = usb_ep_alloc_buffer (ep, length, ++ &req->dma, GFP_ATOMIC); ++ if (!req->buf) { ++ usb_ep_free_request (ep, req); ++ req = NULL; ++ } ++ } ++ return req; ++} ++ ++static void free_ep_req (struct usb_ep *ep, struct usb_request *req) ++{ ++ if (req->buf) ++ usb_ep_free_buffer (ep, req->buf, req->dma, req->length); ++ usb_ep_free_request (ep, req); ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* optionally require specific source/sink data patterns */ ++ ++static int ++check_read_data ( ++ struct zero_dev *dev, ++ struct usb_ep *ep, ++ struct usb_request *req ++) ++{ ++ unsigned i; ++ u8 *buf = req->buf; ++ ++ for (i = 0; i < req->actual; i++, buf++) { ++ switch (pattern) { ++ /* all-zeroes has no synchronization issues */ ++ case 0: ++ if (*buf == 0) ++ continue; ++ break; ++ /* mod63 stays in sync with short-terminated transfers, ++ * or otherwise when host and gadget agree on how large ++ * each usb transfer request should be. resync is done ++ * with set_interface or set_config. ++ */ ++ case 1: ++ if (*buf == (u8)(i % 63)) ++ continue; ++ break; ++ } ++ ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf); ++ usb_ep_set_halt (ep); ++ return -EINVAL; ++ } ++ return 0; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void zero_reset_config (struct zero_dev *dev) ++{ ++ if (dev->config == 0) ++ return; ++ ++ DBG (dev, "reset config\n"); ++ ++ /* just disable endpoints, forcing completion of pending i/o. ++ * all our completion handlers free their requests in this case. ++ */ ++ if (dev->in_ep) { ++ usb_ep_disable (dev->in_ep); ++ dev->in_ep = NULL; ++ } ++ if (dev->out_ep) { ++ usb_ep_disable (dev->out_ep); ++ dev->out_ep = NULL; ++ } ++ dev->config = 0; ++ del_timer (&dev->resume); ++} ++ ++#define _write(f, buf, sz) (f->f_op->write(f, buf, sz, &f->f_pos)) ++ ++static void ++zero_isoc_complete (struct usb_ep *ep, struct usb_request *req) ++{ ++ struct zero_dev *dev = ep->driver_data; ++ int status = req->status; ++ int i, j; ++ ++ switch (status) { ++ ++ case 0: /* normal completion? */ ++ //printk ("\nzero ---------------> isoc normal completion %d bytes\n", req->actual); ++ for (i=0, j=rbuf_start; i<req->actual; i++) { ++ //printk ("%02x ", ((__u8*)req->buf)[i]); ++ rbuf[j] = ((__u8*)req->buf)[i]; ++ j++; ++ if (j >= RBUF_LEN) j=0; ++ } ++ rbuf_start = j; ++ //printk ("\n\n"); ++ ++ if (rbuf_len < RBUF_LEN) { ++ rbuf_len += req->actual; ++ if (rbuf_len > RBUF_LEN) { ++ rbuf_len = RBUF_LEN; ++ } ++ } ++ ++ break; ++ ++ /* this endpoint is normally active while we're configured */ ++ case -ECONNABORTED: /* hardware forced ep reset */ ++ case -ECONNRESET: /* request dequeued */ ++ case -ESHUTDOWN: /* disconnect from host */ ++ VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status, ++ req->actual, req->length); ++ if (ep == dev->out_ep) ++ check_read_data (dev, ep, req); ++ free_ep_req (ep, req); ++ return; ++ ++ case -EOVERFLOW: /* buffer overrun on read means that ++ * we didn't provide a big enough ++ * buffer. ++ */ ++ default: ++#if 1 ++ DBG (dev, "%s complete --> %d, %d/%d\n", ep->name, ++ status, req->actual, req->length); ++#endif ++ case -EREMOTEIO: /* short read */ ++ break; ++ } ++ ++ status = usb_ep_queue (ep, req, GFP_ATOMIC); ++ if (status) { ++ ERROR (dev, "kill %s: resubmit %d bytes --> %d\n", ++ ep->name, req->length, status); ++ usb_ep_set_halt (ep); ++ /* FIXME recover later ... somehow */ ++ } ++} ++ ++static struct usb_request * ++zero_start_isoc_ep (struct usb_ep *ep, int gfp_flags) ++{ ++ struct usb_request *req; ++ int status; ++ ++ req = alloc_ep_req (ep, 512); ++ if (!req) ++ return NULL; ++ ++ req->complete = zero_isoc_complete; ++ ++ status = usb_ep_queue (ep, req, gfp_flags); ++ if (status) { ++ struct zero_dev *dev = ep->driver_data; ++ ++ ERROR (dev, "start %s --> %d\n", ep->name, status); ++ free_ep_req (ep, req); ++ req = NULL; ++ } ++ ++ return req; ++} ++ ++/* change our operational config. this code must agree with the code ++ * that returns config descriptors, and altsetting code. ++ * ++ * it's also responsible for power management interactions. some ++ * configurations might not work with our current power sources. ++ * ++ * note that some device controller hardware will constrain what this ++ * code can do, perhaps by disallowing more than one configuration or ++ * by limiting configuration choices (like the pxa2xx). ++ */ ++static int ++zero_set_config (struct zero_dev *dev, unsigned number, int gfp_flags) ++{ ++ int result = 0; ++ struct usb_gadget *gadget = dev->gadget; ++ const struct usb_endpoint_descriptor *d; ++ struct usb_ep *ep; ++ ++ if (number == dev->config) ++ return 0; ++ ++ zero_reset_config (dev); ++ ++ gadget_for_each_ep (ep, gadget) { ++ ++ if (strcmp (ep->name, "ep4") == 0) { ++ ++ d = (struct usb_endpoint_descripter *)&za_23; // isoc ep desc for audio i/f alt setting 6 ++ result = usb_ep_enable (ep, d); ++ ++ if (result == 0) { ++ ep->driver_data = dev; ++ dev->in_ep = ep; ++ ++ if (zero_start_isoc_ep (ep, gfp_flags) != 0) { ++ ++ dev->in_ep = ep; ++ continue; ++ } ++ ++ usb_ep_disable (ep); ++ result = -EIO; ++ } ++ } ++ ++ } ++ ++ dev->config = number; ++ return result; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req) ++{ ++ if (req->status || req->actual != req->length) ++ DBG ((struct zero_dev *) ep->driver_data, ++ "setup complete --> %d, %d/%d\n", ++ req->status, req->actual, req->length); ++} ++ ++/* ++ * The setup() callback implements all the ep0 functionality that's ++ * not handled lower down, in hardware or the hardware driver (like ++ * device and endpoint feature flags, and their status). It's all ++ * housekeeping for the gadget function we're implementing. Most of ++ * the work is in config-specific setup. ++ */ ++static int ++zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ struct usb_request *req = dev->req; ++ int value = -EOPNOTSUPP; ++ ++ /* usually this stores reply data in the pre-allocated ep0 buffer, ++ * but config change events will reconfigure hardware. ++ */ ++ req->zero = 0; ++ switch (ctrl->bRequest) { ++ ++ case USB_REQ_GET_DESCRIPTOR: ++ ++ switch (ctrl->wValue >> 8) { ++ ++ case USB_DT_DEVICE: ++ value = min (ctrl->wLength, (u16) sizeof device_desc); ++ memcpy (req->buf, &device_desc, value); ++ break; ++#ifdef CONFIG_USB_GADGET_DUALSPEED ++ case USB_DT_DEVICE_QUALIFIER: ++ if (!gadget->is_dualspeed) ++ break; ++ value = min (ctrl->wLength, (u16) sizeof dev_qualifier); ++ memcpy (req->buf, &dev_qualifier, value); ++ break; ++ ++ case USB_DT_OTHER_SPEED_CONFIG: ++ if (!gadget->is_dualspeed) ++ break; ++ // FALLTHROUGH ++#endif /* CONFIG_USB_GADGET_DUALSPEED */ ++ case USB_DT_CONFIG: ++ value = config_buf (gadget, req->buf, ++ ctrl->wValue >> 8, ++ ctrl->wValue & 0xff); ++ if (value >= 0) ++ value = min (ctrl->wLength, (u16) value); ++ break; ++ ++ case USB_DT_STRING: ++ /* wIndex == language code. ++ * this driver only handles one language, you can ++ * add string tables for other languages, using ++ * any UTF-8 characters ++ */ ++ value = usb_gadget_get_string (&stringtab, ++ ctrl->wValue & 0xff, req->buf); ++ if (value >= 0) { ++ value = min (ctrl->wLength, (u16) value); ++ } ++ break; ++ } ++ break; ++ ++ /* currently two configs, two speeds */ ++ case USB_REQ_SET_CONFIGURATION: ++ if (ctrl->bRequestType != 0) ++ goto unknown; ++ ++ spin_lock (&dev->lock); ++ value = zero_set_config (dev, ctrl->wValue, GFP_ATOMIC); ++ spin_unlock (&dev->lock); ++ break; ++ case USB_REQ_GET_CONFIGURATION: ++ if (ctrl->bRequestType != USB_DIR_IN) ++ goto unknown; ++ *(u8 *)req->buf = dev->config; ++ value = min (ctrl->wLength, (u16) 1); ++ break; ++ ++ /* until we add altsetting support, or other interfaces, ++ * only 0/0 are possible. pxa2xx only supports 0/0 (poorly) ++ * and already killed pending endpoint I/O. ++ */ ++ case USB_REQ_SET_INTERFACE: ++ ++ if (ctrl->bRequestType != USB_RECIP_INTERFACE) ++ goto unknown; ++ spin_lock (&dev->lock); ++ if (dev->config) { ++ u8 config = dev->config; ++ ++ /* resets interface configuration, forgets about ++ * previous transaction state (queued bufs, etc) ++ * and re-inits endpoint state (toggle etc) ++ * no response queued, just zero status == success. ++ * if we had more than one interface we couldn't ++ * use this "reset the config" shortcut. ++ */ ++ zero_reset_config (dev); ++ zero_set_config (dev, config, GFP_ATOMIC); ++ value = 0; ++ } ++ spin_unlock (&dev->lock); ++ break; ++ case USB_REQ_GET_INTERFACE: ++ if ((ctrl->bRequestType == 0x21) && (ctrl->wIndex == 0x02)) { ++ value = ctrl->wLength; ++ break; ++ } ++ else { ++ if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) ++ goto unknown; ++ if (!dev->config) ++ break; ++ if (ctrl->wIndex != 0) { ++ value = -EDOM; ++ break; ++ } ++ *(u8 *)req->buf = 0; ++ value = min (ctrl->wLength, (u16) 1); ++ } ++ break; ++ ++ /* ++ * These are the same vendor-specific requests supported by ++ * Intel's USB 2.0 compliance test devices. We exceed that ++ * device spec by allowing multiple-packet requests. ++ */ ++ case 0x5b: /* control WRITE test -- fill the buffer */ ++ if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR)) ++ goto unknown; ++ if (ctrl->wValue || ctrl->wIndex) ++ break; ++ /* just read that many bytes into the buffer */ ++ if (ctrl->wLength > USB_BUFSIZ) ++ break; ++ value = ctrl->wLength; ++ break; ++ case 0x5c: /* control READ test -- return the buffer */ ++ if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR)) ++ goto unknown; ++ if (ctrl->wValue || ctrl->wIndex) ++ break; ++ /* expect those bytes are still in the buffer; send back */ ++ if (ctrl->wLength > USB_BUFSIZ ++ || ctrl->wLength != req->length) ++ break; ++ value = ctrl->wLength; ++ break; ++ ++ case 0x01: // SET_CUR ++ case 0x02: ++ case 0x03: ++ case 0x04: ++ case 0x05: ++ value = ctrl->wLength; ++ break; ++ case 0x81: ++ switch (ctrl->wValue) { ++ case 0x0201: ++ case 0x0202: ++ ((u8*)req->buf)[0] = 0x00; ++ ((u8*)req->buf)[1] = 0xe3; ++ break; ++ case 0x0300: ++ case 0x0500: ++ ((u8*)req->buf)[0] = 0x00; ++ break; ++ } ++ //((u8*)req->buf)[0] = 0x81; ++ //((u8*)req->buf)[1] = 0x81; ++ value = ctrl->wLength; ++ break; ++ case 0x82: ++ switch (ctrl->wValue) { ++ case 0x0201: ++ case 0x0202: ++ ((u8*)req->buf)[0] = 0x00; ++ ((u8*)req->buf)[1] = 0xc3; ++ break; ++ case 0x0300: ++ case 0x0500: ++ ((u8*)req->buf)[0] = 0x00; ++ break; ++ } ++ //((u8*)req->buf)[0] = 0x82; ++ //((u8*)req->buf)[1] = 0x82; ++ value = ctrl->wLength; ++ break; ++ case 0x83: ++ switch (ctrl->wValue) { ++ case 0x0201: ++ case 0x0202: ++ ((u8*)req->buf)[0] = 0x00; ++ ((u8*)req->buf)[1] = 0x00; ++ break; ++ case 0x0300: ++ ((u8*)req->buf)[0] = 0x60; ++ break; ++ case 0x0500: ++ ((u8*)req->buf)[0] = 0x18; ++ break; ++ } ++ //((u8*)req->buf)[0] = 0x83; ++ //((u8*)req->buf)[1] = 0x83; ++ value = ctrl->wLength; ++ break; ++ case 0x84: ++ switch (ctrl->wValue) { ++ case 0x0201: ++ case 0x0202: ++ ((u8*)req->buf)[0] = 0x00; ++ ((u8*)req->buf)[1] = 0x01; ++ break; ++ case 0x0300: ++ case 0x0500: ++ ((u8*)req->buf)[0] = 0x08; ++ break; ++ } ++ //((u8*)req->buf)[0] = 0x84; ++ //((u8*)req->buf)[1] = 0x84; ++ value = ctrl->wLength; ++ break; ++ case 0x85: ++ ((u8*)req->buf)[0] = 0x85; ++ ((u8*)req->buf)[1] = 0x85; ++ value = ctrl->wLength; ++ break; ++ ++ ++ default: ++unknown: ++ printk("unknown control req%02x.%02x v%04x i%04x l%d\n", ++ ctrl->bRequestType, ctrl->bRequest, ++ ctrl->wValue, ctrl->wIndex, ctrl->wLength); ++ } ++ ++ /* respond with data transfer before status phase? */ ++ if (value >= 0) { ++ req->length = value; ++ req->zero = value < ctrl->wLength ++ && (value % gadget->ep0->maxpacket) == 0; ++ value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC); ++ if (value < 0) { ++ DBG (dev, "ep_queue < 0 --> %d\n", value); ++ req->status = 0; ++ zero_setup_complete (gadget->ep0, req); ++ } ++ } ++ ++ /* device either stalls (value < 0) or reports success */ ++ return value; ++} ++ ++static void ++zero_disconnect (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ unsigned long flags; ++ ++ spin_lock_irqsave (&dev->lock, flags); ++ zero_reset_config (dev); ++ ++ /* a more significant application might have some non-usb ++ * activities to quiesce here, saving resources like power ++ * or pushing the notification up a network stack. ++ */ ++ spin_unlock_irqrestore (&dev->lock, flags); ++ ++ /* next we may get setup() calls to enumerate new connections; ++ * or an unbind() during shutdown (including removing module). ++ */ ++} ++ ++static void ++zero_autoresume (unsigned long _dev) ++{ ++ struct zero_dev *dev = (struct zero_dev *) _dev; ++ int status; ++ ++ /* normally the host would be woken up for something ++ * more significant than just a timer firing... ++ */ ++ if (dev->gadget->speed != USB_SPEED_UNKNOWN) { ++ status = usb_gadget_wakeup (dev->gadget); ++ DBG (dev, "wakeup --> %d\n", status); ++ } ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void ++zero_unbind (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ ++ DBG (dev, "unbind\n"); ++ ++ /* we've already been disconnected ... no i/o is active */ ++ if (dev->req) ++ free_ep_req (gadget->ep0, dev->req); ++ del_timer_sync (&dev->resume); ++ kfree (dev); ++ set_gadget_data (gadget, NULL); ++} ++ ++static int ++zero_bind (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev; ++ //struct usb_ep *ep; ++ ++ printk("binding\n"); ++ /* ++ * DRIVER POLICY CHOICE: you may want to do this differently. ++ * One thing to avoid is reusing a bcdDevice revision code ++ * with different host-visible configurations or behavior ++ * restrictions -- using ep1in/ep2out vs ep1out/ep3in, etc ++ */ ++ //device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201); ++ ++ ++ /* ok, we made sense of the hardware ... */ ++ dev = kmalloc (sizeof *dev, SLAB_KERNEL); ++ if (!dev) ++ return -ENOMEM; ++ memset (dev, 0, sizeof *dev); ++ spin_lock_init (&dev->lock); ++ dev->gadget = gadget; ++ set_gadget_data (gadget, dev); ++ ++ /* preallocate control response and buffer */ ++ dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL); ++ if (!dev->req) ++ goto enomem; ++ dev->req->buf = usb_ep_alloc_buffer (gadget->ep0, USB_BUFSIZ, ++ &dev->req->dma, GFP_KERNEL); ++ if (!dev->req->buf) ++ goto enomem; ++ ++ dev->req->complete = zero_setup_complete; ++ ++ device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; ++ ++#ifdef CONFIG_USB_GADGET_DUALSPEED ++ /* assume ep0 uses the same value for both speeds ... */ ++ dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0; ++ ++ /* and that all endpoints are dual-speed */ ++ //hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress; ++ //hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress; ++#endif ++ ++ usb_gadget_set_selfpowered (gadget); ++ ++ init_timer (&dev->resume); ++ dev->resume.function = zero_autoresume; ++ dev->resume.data = (unsigned long) dev; ++ ++ gadget->ep0->driver_data = dev; ++ ++ INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname); ++ INFO (dev, "using %s, OUT %s IN %s\n", gadget->name, ++ EP_OUT_NAME, EP_IN_NAME); ++ ++ snprintf (manufacturer, sizeof manufacturer, ++ UTS_SYSNAME " " UTS_RELEASE " with %s", ++ gadget->name); ++ ++ return 0; ++ ++enomem: ++ zero_unbind (gadget); ++ return -ENOMEM; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void ++zero_suspend (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ ++ if (gadget->speed == USB_SPEED_UNKNOWN) ++ return; ++ ++ if (autoresume) { ++ mod_timer (&dev->resume, jiffies + (HZ * autoresume)); ++ DBG (dev, "suspend, wakeup in %d seconds\n", autoresume); ++ } else ++ DBG (dev, "suspend\n"); ++} ++ ++static void ++zero_resume (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ ++ DBG (dev, "resume\n"); ++ del_timer (&dev->resume); ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static struct usb_gadget_driver zero_driver = { ++#ifdef CONFIG_USB_GADGET_DUALSPEED ++ .speed = USB_SPEED_HIGH, ++#else ++ .speed = USB_SPEED_FULL, ++#endif ++ .function = (char *) longname, ++ .bind = zero_bind, ++ .unbind = zero_unbind, ++ ++ .setup = zero_setup, ++ .disconnect = zero_disconnect, ++ ++ .suspend = zero_suspend, ++ .resume = zero_resume, ++ ++ .driver = { ++ .name = (char *) shortname, ++ // .shutdown = ... ++ // .suspend = ... ++ // .resume = ... ++ }, ++}; ++ ++MODULE_AUTHOR ("David Brownell"); ++MODULE_LICENSE ("Dual BSD/GPL"); ++ ++static struct proc_dir_entry *pdir, *pfile; ++ ++static int isoc_read_data (char *page, char **start, ++ off_t off, int count, ++ int *eof, void *data) ++{ ++ int i; ++ static int c = 0; ++ static int done = 0; ++ static int s = 0; ++ ++/* ++ printk ("\ncount: %d\n", count); ++ printk ("rbuf_start: %d\n", rbuf_start); ++ printk ("rbuf_len: %d\n", rbuf_len); ++ printk ("off: %d\n", off); ++ printk ("start: %p\n\n", *start); ++*/ ++ if (done) { ++ c = 0; ++ done = 0; ++ *eof = 1; ++ return 0; ++ } ++ ++ if (c == 0) { ++ if (rbuf_len == RBUF_LEN) ++ s = rbuf_start; ++ else s = 0; ++ } ++ ++ for (i=0; i<count && c<rbuf_len; i++, c++) { ++ page[i] = rbuf[(c+s) % RBUF_LEN]; ++ } ++ *start = page; ++ ++ if (c >= rbuf_len) { ++ *eof = 1; ++ done = 1; ++ } ++ ++ ++ return i; ++} ++ ++static int __init init (void) ++{ ++ ++ int retval = 0; ++ ++ pdir = proc_mkdir("isoc_test", NULL); ++ if(pdir == NULL) { ++ retval = -ENOMEM; ++ printk("Error creating dir\n"); ++ goto done; ++ } ++ pdir->owner = THIS_MODULE; ++ ++ pfile = create_proc_read_entry("isoc_data", ++ 0444, pdir, ++ isoc_read_data, ++ NULL); ++ if (pfile == NULL) { ++ retval = -ENOMEM; ++ printk("Error creating file\n"); ++ goto no_file; ++ } ++ pfile->owner = THIS_MODULE; ++ ++ return usb_gadget_register_driver (&zero_driver); ++ ++ no_file: ++ remove_proc_entry("isoc_data", NULL); ++ done: ++ return retval; ++} ++module_init (init); ++ ++static void __exit cleanup (void) ++{ ++ ++ usb_gadget_unregister_driver (&zero_driver); ++ ++ remove_proc_entry("isoc_data", pdir); ++ remove_proc_entry("isoc_test", NULL); ++} ++module_exit (cleanup); +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_cfi_common.h +@@ -0,0 +1,142 @@ ++/* ========================================================================== ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#if !defined(__DWC_CFI_COMMON_H__) ++#define __DWC_CFI_COMMON_H__ ++ ++//#include <linux/types.h> ++ ++/** ++ * @file ++ * ++ * This file contains the CFI specific common constants, interfaces ++ * (functions and macros) and structures for Linux. No PCD specific ++ * data structure or definition is to be included in this file. ++ * ++ */ ++ ++/** This is a request for all Core Features */ ++#define VEN_CORE_GET_FEATURES 0xB1 ++ ++/** This is a request to get the value of a specific Core Feature */ ++#define VEN_CORE_GET_FEATURE 0xB2 ++ ++/** This command allows the host to set the value of a specific Core Feature */ ++#define VEN_CORE_SET_FEATURE 0xB3 ++ ++/** This command allows the host to set the default values of ++ * either all or any specific Core Feature ++ */ ++#define VEN_CORE_RESET_FEATURES 0xB4 ++ ++/** This command forces the PCD to write the deferred values of a Core Features */ ++#define VEN_CORE_ACTIVATE_FEATURES 0xB5 ++ ++/** This request reads a DWORD value from a register at the specified offset */ ++#define VEN_CORE_READ_REGISTER 0xB6 ++ ++/** This request writes a DWORD value into a register at the specified offset */ ++#define VEN_CORE_WRITE_REGISTER 0xB7 ++ ++/** This structure is the header of the Core Features dataset returned to ++ * the Host ++ */ ++struct cfi_all_features_header { ++/** The features header structure length is */ ++#define CFI_ALL_FEATURES_HDR_LEN 8 ++ /** ++ * The total length of the features dataset returned to the Host ++ */ ++ uint16_t wTotalLen; ++ ++ /** ++ * CFI version number inBinary-Coded Decimal (i.e., 1.00 is 100H). ++ * This field identifies the version of the CFI Specification with which ++ * the device is compliant. ++ */ ++ uint16_t wVersion; ++ ++ /** The ID of the Core */ ++ uint16_t wCoreID; ++#define CFI_CORE_ID_UDC 1 ++#define CFI_CORE_ID_OTG 2 ++#define CFI_CORE_ID_WUDEV 3 ++ ++ /** Number of features returned by VEN_CORE_GET_FEATURES request */ ++ uint16_t wNumFeatures; ++} UPACKED; ++ ++typedef struct cfi_all_features_header cfi_all_features_header_t; ++ ++/** This structure is a header of the Core Feature descriptor dataset returned to ++ * the Host after the VEN_CORE_GET_FEATURES request ++ */ ++struct cfi_feature_desc_header { ++#define CFI_FEATURE_DESC_HDR_LEN 8 ++ ++ /** The feature ID */ ++ uint16_t wFeatureID; ++ ++ /** Length of this feature descriptor in bytes - including the ++ * length of the feature name string ++ */ ++ uint16_t wLength; ++ ++ /** The data length of this feature in bytes */ ++ uint16_t wDataLength; ++ ++ /** ++ * Attributes of this features ++ * D0: Access rights ++ * 0 - Read/Write ++ * 1 - Read only ++ */ ++ uint8_t bmAttributes; ++#define CFI_FEATURE_ATTR_RO 1 ++#define CFI_FEATURE_ATTR_RW 0 ++ ++ /** Length of the feature name in bytes */ ++ uint8_t bNameLen; ++ ++ /** The feature name buffer */ ++ //uint8_t *name; ++} UPACKED; ++ ++typedef struct cfi_feature_desc_header cfi_feature_desc_header_t; ++ ++/** ++ * This structure describes a NULL terminated string referenced by its id field. ++ * It is very similar to usb_string structure but has the id field type set to 16-bit. ++ */ ++struct cfi_string { ++ uint16_t id; ++ const uint8_t *s; ++}; ++typedef struct cfi_string cfi_string_t; ++ ++#endif +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_adp.c +@@ -0,0 +1,854 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_adp.c $ ++ * $Revision: #12 $ ++ * $Date: 2011/10/26 $ ++ * $Change: 1873028 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#include "dwc_os.h" ++#include "dwc_otg_regs.h" ++#include "dwc_otg_cil.h" ++#include "dwc_otg_adp.h" ++ ++/** @file ++ * ++ * This file contains the most of the Attach Detect Protocol implementation for ++ * the driver to support OTG Rev2.0. ++ * ++ */ ++ ++void dwc_otg_adp_write_reg(dwc_otg_core_if_t * core_if, uint32_t value) ++{ ++ adpctl_data_t adpctl; ++ ++ adpctl.d32 = value; ++ adpctl.b.ar = 0x2; ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->adpctl, adpctl.d32); ++ ++ while (adpctl.b.ar) { ++ adpctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->adpctl); ++ } ++ ++} ++ ++/** ++ * Function is called to read ADP registers ++ */ ++uint32_t dwc_otg_adp_read_reg(dwc_otg_core_if_t * core_if) ++{ ++ adpctl_data_t adpctl; ++ ++ adpctl.d32 = 0; ++ adpctl.b.ar = 0x1; ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->adpctl, adpctl.d32); ++ ++ while (adpctl.b.ar) { ++ adpctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->adpctl); ++ } ++ ++ return adpctl.d32; ++} ++ ++/** ++ * Function is called to read ADPCTL register and filter Write-clear bits ++ */ ++uint32_t dwc_otg_adp_read_reg_filter(dwc_otg_core_if_t * core_if) ++{ ++ adpctl_data_t adpctl; ++ ++ adpctl.d32 = dwc_otg_adp_read_reg(core_if); ++ adpctl.b.adp_tmout_int = 0; ++ adpctl.b.adp_prb_int = 0; ++ adpctl.b.adp_tmout_int = 0; ++ ++ return adpctl.d32; ++} ++ ++/** ++ * Function is called to write ADP registers ++ */ ++void dwc_otg_adp_modify_reg(dwc_otg_core_if_t * core_if, uint32_t clr, ++ uint32_t set) ++{ ++ dwc_otg_adp_write_reg(core_if, ++ (dwc_otg_adp_read_reg(core_if) & (~clr)) | set); ++} ++ ++static void adp_sense_timeout(void *ptr) ++{ ++ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr; ++ core_if->adp.sense_timer_started = 0; ++ DWC_PRINTF("ADP SENSE TIMEOUT\n"); ++ if (core_if->adp_enable) { ++ dwc_otg_adp_sense_stop(core_if); ++ dwc_otg_adp_probe_start(core_if); ++ } ++} ++ ++/** ++ * This function is called when the ADP vbus timer expires. Timeout is 1.1s. ++ */ ++static void adp_vbuson_timeout(void *ptr) ++{ ++ gpwrdn_data_t gpwrdn; ++ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr; ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ DWC_PRINTF("%s: 1.1 seconds expire after turning on VBUS\n",__FUNCTION__); ++ if (core_if) { ++ core_if->adp.vbuson_timer_started = 0; ++ /* Turn off vbus */ ++ hprt0.b.prtpwr = 1; ++ DWC_MODIFY_REG32(core_if->host_if->hprt0, hprt0.d32, 0); ++ gpwrdn.d32 = 0; ++ ++ /* Power off the core */ ++ if (core_if->power_down == 2) { ++ /* Enable Wakeup Logic */ ++// gpwrdn.b.wkupactiv = 1; ++ gpwrdn.b.pmuactv = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, ++ gpwrdn.d32); ++ ++ /* Suspend the Phy Clock */ ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); ++ ++ /* Switch on VDD */ ++// gpwrdn.b.wkupactiv = 1; ++ gpwrdn.b.pmuactv = 1; ++ gpwrdn.b.pwrdnrstn = 1; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, ++ gpwrdn.d32); ++ } else { ++ /* Enable Power Down Logic */ ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ } ++ ++ /* Power off the core */ ++ if (core_if->power_down == 2) { ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, ++ gpwrdn.d32, 0); ++ } ++ ++ /* Unmask SRP detected interrupt from Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.srp_det_msk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ ++ dwc_otg_adp_probe_start(core_if); ++ dwc_otg_dump_global_registers(core_if); ++ dwc_otg_dump_host_registers(core_if); ++ } ++ ++} ++ ++/** ++ * Start the ADP Initial Probe timer to detect if Port Connected interrupt is ++ * not asserted within 1.1 seconds. ++ * ++ * @param core_if the pointer to core_if strucure. ++ */ ++void dwc_otg_adp_vbuson_timer_start(dwc_otg_core_if_t * core_if) ++{ ++ core_if->adp.vbuson_timer_started = 1; ++ if (core_if->adp.vbuson_timer) ++ { ++ DWC_PRINTF("SCHEDULING VBUSON TIMER\n"); ++ /* 1.1 secs + 60ms necessary for cil_hcd_start*/ ++ DWC_TIMER_SCHEDULE(core_if->adp.vbuson_timer, 1160); ++ } else { ++ DWC_WARN("VBUSON_TIMER = %p\n",core_if->adp.vbuson_timer); ++ } ++} ++ ++#if 0 ++/** ++ * Masks all DWC OTG core interrupts ++ * ++ */ ++static void mask_all_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ int i; ++ gahbcfg_data_t ahbcfg = {.d32 = 0 }; ++ ++ /* Mask Host Interrupts */ ++ ++ /* Clear and disable HCINTs */ ++ for (i = 0; i < core_if->core_params->host_channels; i++) { ++ DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcintmsk, 0); ++ DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcint, 0xFFFFFFFF); ++ ++ } ++ ++ /* Clear and disable HAINT */ ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haintmsk, 0x0000); ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haint, 0xFFFFFFFF); ++ ++ /* Mask Device Interrupts */ ++ if (!core_if->multiproc_int_enable) { ++ /* Clear and disable IN Endpoint interrupts */ ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->diepmsk, 0); ++ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]-> ++ diepint, 0xFFFFFFFF); ++ } ++ ++ /* Clear and disable OUT Endpoint interrupts */ ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->doepmsk, 0); ++ for (i = 0; i <= core_if->dev_if->num_out_eps; i++) { ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]-> ++ doepint, 0xFFFFFFFF); ++ } ++ ++ /* Clear and disable DAINT */ ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daint, ++ 0xFFFFFFFF); ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daintmsk, 0); ++ } else { ++ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs-> ++ diepeachintmsk[i], 0); ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]-> ++ diepint, 0xFFFFFFFF); ++ } ++ ++ for (i = 0; i < core_if->dev_if->num_out_eps; ++i) { ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs-> ++ doepeachintmsk[i], 0); ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]-> ++ doepint, 0xFFFFFFFF); ++ } ++ ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->deachintmsk, ++ 0); ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->deachint, ++ 0xFFFFFFFF); ++ ++ } ++ ++ /* Disable interrupts */ ++ ahbcfg.b.glblintrmsk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0); ++ ++ /* Disable all interrupts. */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0); ++ ++ /* Clear any pending interrupts */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* Clear any pending OTG Interrupts */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gotgint, 0xFFFFFFFF); ++} ++ ++/** ++ * Unmask Port Connection Detected interrupt ++ * ++ */ ++static void unmask_conn_det_intr(dwc_otg_core_if_t * core_if) ++{ ++ gintmsk_data_t gintmsk = {.d32 = 0,.b.portintr = 1 }; ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32); ++} ++#endif ++ ++/** ++ * Starts the ADP Probing ++ * ++ * @param core_if the pointer to core_if structure. ++ */ ++uint32_t dwc_otg_adp_probe_start(dwc_otg_core_if_t * core_if) ++{ ++ ++ adpctl_data_t adpctl = {.d32 = 0}; ++ gpwrdn_data_t gpwrdn; ++#if 0 ++ adpctl_data_t adpctl_int = {.d32 = 0, .b.adp_prb_int = 1, ++ .b.adp_sns_int = 1, b.adp_tmout_int}; ++#endif ++ dwc_otg_disable_global_interrupts(core_if); ++ DWC_PRINTF("ADP Probe Start\n"); ++ core_if->adp.probe_enabled = 1; ++ ++ adpctl.b.adpres = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ ++ while (adpctl.b.adpres) { ++ adpctl.d32 = dwc_otg_adp_read_reg(core_if); ++ } ++ ++ adpctl.d32 = 0; ++ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ ++ /* In Host mode unmask SRP detected interrupt */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.sts_chngint_msk = 1; ++ if (!gpwrdn.b.idsts) { ++ gpwrdn.b.srp_det_msk = 1; ++ } ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ ++ adpctl.b.adp_tmout_int_msk = 1; ++ adpctl.b.adp_prb_int_msk = 1; ++ adpctl.b.prb_dschg = 1; ++ adpctl.b.prb_delta = 1; ++ adpctl.b.prb_per = 1; ++ adpctl.b.adpen = 1; ++ adpctl.b.enaprb = 1; ++ ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ DWC_PRINTF("ADP Probe Finish\n"); ++ return 0; ++} ++ ++/** ++ * Starts the ADP Sense timer to detect if ADP Sense interrupt is not asserted ++ * within 3 seconds. ++ * ++ * @param core_if the pointer to core_if strucure. ++ */ ++void dwc_otg_adp_sense_timer_start(dwc_otg_core_if_t * core_if) ++{ ++ core_if->adp.sense_timer_started = 1; ++ DWC_TIMER_SCHEDULE(core_if->adp.sense_timer, 3000 /* 3 secs */ ); ++} ++ ++/** ++ * Starts the ADP Sense ++ * ++ * @param core_if the pointer to core_if strucure. ++ */ ++uint32_t dwc_otg_adp_sense_start(dwc_otg_core_if_t * core_if) ++{ ++ adpctl_data_t adpctl; ++ ++ DWC_PRINTF("ADP Sense Start\n"); ++ ++ /* Unmask ADP sense interrupt and mask all other from the core */ ++ adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if); ++ adpctl.b.adp_sns_int_msk = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ dwc_otg_disable_global_interrupts(core_if); // vahrama ++ ++ /* Set ADP reset bit*/ ++ adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if); ++ adpctl.b.adpres = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ ++ while (adpctl.b.adpres) { ++ adpctl.d32 = dwc_otg_adp_read_reg(core_if); ++ } ++ ++ adpctl.b.adpres = 0; ++ adpctl.b.adpen = 1; ++ adpctl.b.enasns = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ ++ dwc_otg_adp_sense_timer_start(core_if); ++ ++ return 0; ++} ++ ++/** ++ * Stops the ADP Probing ++ * ++ * @param core_if the pointer to core_if strucure. ++ */ ++uint32_t dwc_otg_adp_probe_stop(dwc_otg_core_if_t * core_if) ++{ ++ ++ adpctl_data_t adpctl; ++ DWC_PRINTF("Stop ADP probe\n"); ++ core_if->adp.probe_enabled = 0; ++ core_if->adp.probe_counter = 0; ++ adpctl.d32 = dwc_otg_adp_read_reg(core_if); ++ ++ adpctl.b.adpen = 0; ++ adpctl.b.adp_prb_int = 1; ++ adpctl.b.adp_tmout_int = 1; ++ adpctl.b.adp_sns_int = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ ++ return 0; ++} ++ ++/** ++ * Stops the ADP Sensing ++ * ++ * @param core_if the pointer to core_if strucure. ++ */ ++uint32_t dwc_otg_adp_sense_stop(dwc_otg_core_if_t * core_if) ++{ ++ adpctl_data_t adpctl; ++ ++ core_if->adp.sense_enabled = 0; ++ ++ adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if); ++ adpctl.b.enasns = 0; ++ adpctl.b.adp_sns_int = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ ++ return 0; ++} ++ ++/** ++ * Called to turn on the VBUS after initial ADP probe in host mode. ++ * If port power was already enabled in cil_hcd_start function then ++ * only schedule a timer. ++ * ++ * @param core_if the pointer to core_if structure. ++ */ ++void dwc_otg_adp_turnon_vbus(dwc_otg_core_if_t * core_if) ++{ ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ DWC_PRINTF("Turn on VBUS for 1.1s, port power is %d\n", hprt0.b.prtpwr); ++ ++ if (hprt0.b.prtpwr == 0) { ++ hprt0.b.prtpwr = 1; ++ //DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ } ++ ++ dwc_otg_adp_vbuson_timer_start(core_if); ++} ++ ++/** ++ * Called right after driver is loaded ++ * to perform initial actions for ADP ++ * ++ * @param core_if the pointer to core_if structure. ++ * @param is_host - flag for current mode of operation either from GINTSTS or GPWRDN ++ */ ++void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host) ++{ ++ gpwrdn_data_t gpwrdn; ++ ++ DWC_PRINTF("ADP Initial Start\n"); ++ core_if->adp.adp_started = 1; ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ dwc_otg_disable_global_interrupts(core_if); ++ if (is_host) { ++ DWC_PRINTF("HOST MODE\n"); ++ /* Enable Power Down Logic Interrupt*/ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ /* Initialize first ADP probe to obtain Ramp Time value */ ++ core_if->adp.initial_probe = 1; ++ dwc_otg_adp_probe_start(core_if); ++ } else { ++ gotgctl_data_t gotgctl; ++ gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++ DWC_PRINTF("DEVICE MODE\n"); ++ if (gotgctl.b.bsesvld == 0) { ++ /* Enable Power Down Logic Interrupt*/ ++ gpwrdn.d32 = 0; ++ DWC_PRINTF("VBUS is not valid - start ADP probe\n"); ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ core_if->adp.initial_probe = 1; ++ dwc_otg_adp_probe_start(core_if); ++ } else { ++ DWC_PRINTF("VBUS is valid - initialize core as a Device\n"); ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ dwc_otg_dump_global_registers(core_if); ++ dwc_otg_dump_dev_registers(core_if); ++ } ++ } ++} ++ ++void dwc_otg_adp_init(dwc_otg_core_if_t * core_if) ++{ ++ core_if->adp.adp_started = 0; ++ core_if->adp.initial_probe = 0; ++ core_if->adp.probe_timer_values[0] = -1; ++ core_if->adp.probe_timer_values[1] = -1; ++ core_if->adp.probe_enabled = 0; ++ core_if->adp.sense_enabled = 0; ++ core_if->adp.sense_timer_started = 0; ++ core_if->adp.vbuson_timer_started = 0; ++ core_if->adp.probe_counter = 0; ++ core_if->adp.gpwrdn = 0; ++ core_if->adp.attached = DWC_OTG_ADP_UNKOWN; ++ /* Initialize timers */ ++ core_if->adp.sense_timer = ++ DWC_TIMER_ALLOC("ADP SENSE TIMER", adp_sense_timeout, core_if); ++ core_if->adp.vbuson_timer = ++ DWC_TIMER_ALLOC("ADP VBUS ON TIMER", adp_vbuson_timeout, core_if); ++ if (!core_if->adp.sense_timer || !core_if->adp.vbuson_timer) ++ { ++ DWC_ERROR("Could not allocate memory for ADP timers\n"); ++ } ++} ++ ++void dwc_otg_adp_remove(dwc_otg_core_if_t * core_if) ++{ ++ gpwrdn_data_t gpwrdn = { .d32 = 0 }; ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ if (core_if->adp.probe_enabled) ++ dwc_otg_adp_probe_stop(core_if); ++ if (core_if->adp.sense_enabled) ++ dwc_otg_adp_sense_stop(core_if); ++ if (core_if->adp.sense_timer_started) ++ DWC_TIMER_CANCEL(core_if->adp.sense_timer); ++ if (core_if->adp.vbuson_timer_started) ++ DWC_TIMER_CANCEL(core_if->adp.vbuson_timer); ++ DWC_TIMER_FREE(core_if->adp.sense_timer); ++ DWC_TIMER_FREE(core_if->adp.vbuson_timer); ++} ++ ++///////////////////////////////////////////////////////////////////// ++////////////// ADP Interrupt Handlers /////////////////////////////// ++///////////////////////////////////////////////////////////////////// ++/** ++ * This function sets Ramp Timer values ++ */ ++static uint32_t set_timer_value(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ if (core_if->adp.probe_timer_values[0] == -1) { ++ core_if->adp.probe_timer_values[0] = val; ++ core_if->adp.probe_timer_values[1] = -1; ++ return 1; ++ } else { ++ core_if->adp.probe_timer_values[1] = ++ core_if->adp.probe_timer_values[0]; ++ core_if->adp.probe_timer_values[0] = val; ++ return 0; ++ } ++} ++ ++/** ++ * This function compares Ramp Timer values ++ */ ++static uint32_t compare_timer_values(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t diff; ++ if (core_if->adp.probe_timer_values[0]>=core_if->adp.probe_timer_values[1]) ++ diff = core_if->adp.probe_timer_values[0]-core_if->adp.probe_timer_values[1]; ++ else ++ diff = core_if->adp.probe_timer_values[1]-core_if->adp.probe_timer_values[0]; ++ if(diff < 2) { ++ return 0; ++ } else { ++ return 1; ++ } ++} ++ ++/** ++ * This function handles ADP Probe Interrupts ++ */ ++static int32_t dwc_otg_adp_handle_prb_intr(dwc_otg_core_if_t * core_if, ++ uint32_t val) ++{ ++ adpctl_data_t adpctl = {.d32 = 0 }; ++ gpwrdn_data_t gpwrdn, temp; ++ adpctl.d32 = val; ++ ++ temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ core_if->adp.probe_counter++; ++ core_if->adp.gpwrdn = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ if (adpctl.b.rtim == 0 && !temp.b.idsts){ ++ DWC_PRINTF("RTIM value is 0\n"); ++ goto exit; ++ } ++ if (set_timer_value(core_if, adpctl.b.rtim) && ++ core_if->adp.initial_probe) { ++ core_if->adp.initial_probe = 0; ++ dwc_otg_adp_probe_stop(core_if); ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* check which value is for device mode and which for Host mode */ ++ if (!temp.b.idsts) { /* considered host mode value is 0 */ ++ /* ++ * Turn on VBUS after initial ADP probe. ++ */ ++ core_if->op_state = A_HOST; ++ dwc_otg_enable_global_interrupts(core_if); ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_hcd_start(core_if); ++ dwc_otg_adp_turnon_vbus(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ } else { ++ /* ++ * Initiate SRP after initial ADP probe. ++ */ ++ dwc_otg_enable_global_interrupts(core_if); ++ dwc_otg_initiate_srp(core_if); ++ } ++ } else if (core_if->adp.probe_counter > 2){ ++ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ if (compare_timer_values(core_if)) { ++ DWC_PRINTF("Difference in timer values !!! \n"); ++// core_if->adp.attached = DWC_OTG_ADP_ATTACHED; ++ dwc_otg_adp_probe_stop(core_if); ++ ++ /* Power on the core */ ++ if (core_if->power_down == 2) { ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ } ++ ++ /* check which value is for device mode and which for Host mode */ ++ if (!temp.b.idsts) { /* considered host mode value is 0 */ ++ /* Disable Interrupt from Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, gpwrdn.d32, 0); ++ ++ /* ++ * Initialize the Core for Host mode. ++ */ ++ core_if->op_state = A_HOST; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_hcd_start(core_if); ++ } else { ++ gotgctl_data_t gotgctl; ++ /* Mask SRP detected interrupt from Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.srp_det_msk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, gpwrdn.d32, 0); ++ ++ /* Disable Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, gpwrdn.d32, 0); ++ ++ /* ++ * Initialize the Core for Device mode. ++ */ ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ ++ gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++ if (!gotgctl.b.bsesvld) { ++ dwc_otg_initiate_srp(core_if); ++ } ++ } ++ } ++ if (core_if->power_down == 2) { ++ if (gpwrdn.b.bsessvld) { ++ /* Mask SRP detected interrupt from Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.srp_det_msk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Disable Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* ++ * Initialize the Core for Device mode. ++ */ ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ } ++ } ++ } ++exit: ++ /* Clear interrupt */ ++ adpctl.d32 = dwc_otg_adp_read_reg(core_if); ++ adpctl.b.adp_prb_int = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ ++ return 0; ++} ++ ++/** ++ * This function hadles ADP Sense Interrupt ++ */ ++static int32_t dwc_otg_adp_handle_sns_intr(dwc_otg_core_if_t * core_if) ++{ ++ adpctl_data_t adpctl; ++ /* Stop ADP Sense timer */ ++ DWC_TIMER_CANCEL(core_if->adp.sense_timer); ++ ++ /* Restart ADP Sense timer */ ++ dwc_otg_adp_sense_timer_start(core_if); ++ ++ /* Clear interrupt */ ++ adpctl.d32 = dwc_otg_adp_read_reg(core_if); ++ adpctl.b.adp_sns_int = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ ++ return 0; ++} ++ ++/** ++ * This function handles ADP Probe Interrupts ++ */ ++static int32_t dwc_otg_adp_handle_prb_tmout_intr(dwc_otg_core_if_t * core_if, ++ uint32_t val) ++{ ++ adpctl_data_t adpctl = {.d32 = 0 }; ++ adpctl.d32 = val; ++ set_timer_value(core_if, adpctl.b.rtim); ++ ++ /* Clear interrupt */ ++ adpctl.d32 = dwc_otg_adp_read_reg(core_if); ++ adpctl.b.adp_tmout_int = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ ++ return 0; ++} ++ ++/** ++ * ADP Interrupt handler. ++ * ++ */ ++int32_t dwc_otg_adp_handle_intr(dwc_otg_core_if_t * core_if) ++{ ++ int retval = 0; ++ adpctl_data_t adpctl = {.d32 = 0}; ++ ++ adpctl.d32 = dwc_otg_adp_read_reg(core_if); ++ DWC_PRINTF("ADPCTL = %08x\n",adpctl.d32); ++ ++ if (adpctl.b.adp_sns_int & adpctl.b.adp_sns_int_msk) { ++ DWC_PRINTF("ADP Sense interrupt\n"); ++ retval |= dwc_otg_adp_handle_sns_intr(core_if); ++ } ++ if (adpctl.b.adp_tmout_int & adpctl.b.adp_tmout_int_msk) { ++ DWC_PRINTF("ADP timeout interrupt\n"); ++ retval |= dwc_otg_adp_handle_prb_tmout_intr(core_if, adpctl.d32); ++ } ++ if (adpctl.b.adp_prb_int & adpctl.b.adp_prb_int_msk) { ++ DWC_PRINTF("ADP Probe interrupt\n"); ++ adpctl.b.adp_prb_int = 1; ++ retval |= dwc_otg_adp_handle_prb_intr(core_if, adpctl.d32); ++ } ++ ++// dwc_otg_adp_modify_reg(core_if, adpctl.d32, 0); ++ //dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ DWC_PRINTF("RETURN FROM ADP ISR\n"); ++ ++ return retval; ++} ++ ++/** ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++int32_t dwc_otg_adp_handle_srp_intr(dwc_otg_core_if_t * core_if) ++{ ++ ++#ifndef DWC_HOST_ONLY ++ hprt0_data_t hprt0; ++ gpwrdn_data_t gpwrdn; ++ DWC_DEBUGPL(DBG_ANY, "++ Power Down Logic Session Request Interrupt++\n"); ++ ++ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ /* check which value is for device mode and which for Host mode */ ++ if (!gpwrdn.b.idsts) { /* considered host mode value is 0 */ ++ DWC_PRINTF("SRP: Host mode\n"); ++ ++ if (core_if->adp_enable) { ++ dwc_otg_adp_probe_stop(core_if); ++ ++ /* Power on the core */ ++ if (core_if->power_down == 2) { ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ } ++ ++ core_if->op_state = A_HOST; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_hcd_start(core_if); ++ } ++ ++ /* Turn on the port power bit. */ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtpwr = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ ++ /* Start the Connection timer. So a message can be displayed ++ * if connect does not occur within 10 seconds. */ ++ cil_hcd_session_start(core_if); ++ } else { ++ DWC_PRINTF("SRP: Device mode %s\n", __FUNCTION__); ++ if (core_if->adp_enable) { ++ dwc_otg_adp_probe_stop(core_if); ++ ++ /* Power on the core */ ++ if (core_if->power_down == 2) { ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ } ++ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 0; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, ++ gpwrdn.d32); ++ ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ } ++ } ++#endif ++ return 1; ++} +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_adp.h +@@ -0,0 +1,80 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_adp.h $ ++ * $Revision: #7 $ ++ * $Date: 2011/10/24 $ ++ * $Change: 1871159 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#ifndef __DWC_OTG_ADP_H__ ++#define __DWC_OTG_ADP_H__ ++ ++/** ++ * @file ++ * ++ * This file contains the Attach Detect Protocol interfaces and defines ++ * (functions) and structures for Linux. ++ * ++ */ ++ ++#define DWC_OTG_ADP_UNATTACHED 0 ++#define DWC_OTG_ADP_ATTACHED 1 ++#define DWC_OTG_ADP_UNKOWN 2 ++ ++typedef struct dwc_otg_adp { ++ uint32_t adp_started; ++ uint32_t initial_probe; ++ int32_t probe_timer_values[2]; ++ uint32_t probe_enabled; ++ uint32_t sense_enabled; ++ dwc_timer_t *sense_timer; ++ uint32_t sense_timer_started; ++ dwc_timer_t *vbuson_timer; ++ uint32_t vbuson_timer_started; ++ uint32_t attached; ++ uint32_t probe_counter; ++ uint32_t gpwrdn; ++} dwc_otg_adp_t; ++ ++/** ++ * Attach Detect Protocol functions ++ */ ++ ++extern void dwc_otg_adp_write_reg(dwc_otg_core_if_t * core_if, uint32_t value); ++extern uint32_t dwc_otg_adp_read_reg(dwc_otg_core_if_t * core_if); ++extern uint32_t dwc_otg_adp_probe_start(dwc_otg_core_if_t * core_if); ++extern uint32_t dwc_otg_adp_sense_start(dwc_otg_core_if_t * core_if); ++extern uint32_t dwc_otg_adp_probe_stop(dwc_otg_core_if_t * core_if); ++extern uint32_t dwc_otg_adp_sense_stop(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host); ++extern void dwc_otg_adp_init(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_adp_remove(dwc_otg_core_if_t * core_if); ++extern int32_t dwc_otg_adp_handle_intr(dwc_otg_core_if_t * core_if); ++extern int32_t dwc_otg_adp_handle_srp_intr(dwc_otg_core_if_t * core_if); ++ ++#endif //__DWC_OTG_ADP_H__ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_attr.c +@@ -0,0 +1,1210 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.c $ ++ * $Revision: #44 $ ++ * $Date: 2010/11/29 $ ++ * $Change: 1636033 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++/** @file ++ * ++ * The diagnostic interface will provide access to the controller for ++ * bringing up the hardware and testing. The Linux driver attributes ++ * feature will be used to provide the Linux Diagnostic ++ * Interface. These attributes are accessed through sysfs. ++ */ ++ ++/** @page "Linux Module Attributes" ++ * ++ * The Linux module attributes feature is used to provide the Linux ++ * Diagnostic Interface. These attributes are accessed through sysfs. ++ * The diagnostic interface will provide access to the controller for ++ * bringing up the hardware and testing. ++ ++ The following table shows the attributes. ++ <table> ++ <tr> ++ <td><b> Name</b></td> ++ <td><b> Description</b></td> ++ <td><b> Access</b></td> ++ </tr> ++ ++ <tr> ++ <td> mode </td> ++ <td> Returns the current mode: 0 for device mode, 1 for host mode</td> ++ <td> Read</td> ++ </tr> ++ ++ <tr> ++ <td> hnpcapable </td> ++ <td> Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register. ++ Read returns the current value.</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> srpcapable </td> ++ <td> Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register. ++ Read returns the current value.</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> hsic_connect </td> ++ <td> Gets or sets the "HSIC-Connect" bit in the GLPMCFG Register. ++ Read returns the current value.</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> inv_sel_hsic </td> ++ <td> Gets or sets the "Invert Select HSIC" bit in the GLPMFG Register. ++ Read returns the current value.</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> hnp </td> ++ <td> Initiates the Host Negotiation Protocol. Read returns the status.</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> srp </td> ++ <td> Initiates the Session Request Protocol. Read returns the status.</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> buspower </td> ++ <td> Gets or sets the Power State of the bus (0 - Off or 1 - On)</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> bussuspend </td> ++ <td> Suspends the USB bus.</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> busconnected </td> ++ <td> Gets the connection status of the bus</td> ++ <td> Read</td> ++ </tr> ++ ++ <tr> ++ <td> gotgctl </td> ++ <td> Gets or sets the Core Control Status Register.</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> gusbcfg </td> ++ <td> Gets or sets the Core USB Configuration Register</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> grxfsiz </td> ++ <td> Gets or sets the Receive FIFO Size Register</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> gnptxfsiz </td> ++ <td> Gets or sets the non-periodic Transmit Size Register</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> gpvndctl </td> ++ <td> Gets or sets the PHY Vendor Control Register</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> ggpio </td> ++ <td> Gets the value in the lower 16-bits of the General Purpose IO Register ++ or sets the upper 16 bits.</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> guid </td> ++ <td> Gets or sets the value of the User ID Register</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> gsnpsid </td> ++ <td> Gets the value of the Synopsys ID Regester</td> ++ <td> Read</td> ++ </tr> ++ ++ <tr> ++ <td> devspeed </td> ++ <td> Gets or sets the device speed setting in the DCFG register</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> enumspeed </td> ++ <td> Gets the device enumeration Speed.</td> ++ <td> Read</td> ++ </tr> ++ ++ <tr> ++ <td> hptxfsiz </td> ++ <td> Gets the value of the Host Periodic Transmit FIFO</td> ++ <td> Read</td> ++ </tr> ++ ++ <tr> ++ <td> hprt0 </td> ++ <td> Gets or sets the value in the Host Port Control and Status Register</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> regoffset </td> ++ <td> Sets the register offset for the next Register Access</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> regvalue </td> ++ <td> Gets or sets the value of the register at the offset in the regoffset attribute.</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> remote_wakeup </td> ++ <td> On read, shows the status of Remote Wakeup. On write, initiates a remote ++ wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote ++ Wakeup signalling bit in the Device Control Register is set for 1 ++ milli-second.</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> rem_wakeup_pwrdn </td> ++ <td> On read, shows the status core - hibernated or not. On write, initiates ++ a remote wakeup of the device from Hibernation. </td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> mode_ch_tim_en </td> ++ <td> This bit is used to enable or disable the host core to wait for 200 PHY ++ clock cycles at the end of Resume to change the opmode signal to the PHY to 00 ++ after Suspend or LPM. </td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> fr_interval </td> ++ <td> On read, shows the value of HFIR Frame Interval. On write, dynamically ++ reload HFIR register during runtime. The application can write a value to this ++ register only after the Port Enable bit of the Host Port Control and Status ++ register (HPRT.PrtEnaPort) has been set </td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> disconnect_us </td> ++ <td> On read, shows the status of disconnect_device_us. On write, sets disconnect_us ++ which causes soft disconnect for 100us. Applicable only for device mode of operation.</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> regdump </td> ++ <td> Dumps the contents of core registers.</td> ++ <td> Read</td> ++ </tr> ++ ++ <tr> ++ <td> spramdump </td> ++ <td> Dumps the contents of core registers.</td> ++ <td> Read</td> ++ </tr> ++ ++ <tr> ++ <td> hcddump </td> ++ <td> Dumps the current HCD state.</td> ++ <td> Read</td> ++ </tr> ++ ++ <tr> ++ <td> hcd_frrem </td> ++ <td> Shows the average value of the Frame Remaining ++ field in the Host Frame Number/Frame Remaining register when an SOF interrupt ++ occurs. This can be used to determine the average interrupt latency. Also ++ shows the average Frame Remaining value for start_transfer and the "a" and ++ "b" sample points. The "a" and "b" sample points may be used during debugging ++ bto determine how long it takes to execute a section of the HCD code.</td> ++ <td> Read</td> ++ </tr> ++ ++ <tr> ++ <td> rd_reg_test </td> ++ <td> Displays the time required to read the GNPTXFSIZ register many times ++ (the output shows the number of times the register is read). ++ <td> Read</td> ++ </tr> ++ ++ <tr> ++ <td> wr_reg_test </td> ++ <td> Displays the time required to write the GNPTXFSIZ register many times ++ (the output shows the number of times the register is written). ++ <td> Read</td> ++ </tr> ++ ++ <tr> ++ <td> lpm_response </td> ++ <td> Gets or sets lpm_response mode. Applicable only in device mode. ++ <td> Write</td> ++ </tr> ++ ++ <tr> ++ <td> sleep_status </td> ++ <td> Shows sleep status of device. ++ <td> Read</td> ++ </tr> ++ ++ </table> ++ ++ Example usage: ++ To get the current mode: ++ cat /sys/devices/lm0/mode ++ ++ To power down the USB: ++ echo 0 > /sys/devices/lm0/buspower ++ */ ++ ++#include "dwc_otg_os_dep.h" ++#include "dwc_os.h" ++#include "dwc_otg_driver.h" ++#include "dwc_otg_attr.h" ++#include "dwc_otg_core_if.h" ++#include "dwc_otg_pcd_if.h" ++#include "dwc_otg_hcd_if.h" ++ ++/* ++ * MACROs for defining sysfs attribute ++ */ ++#ifdef LM_INTERFACE ++ ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ ++ uint32_t val; \ ++ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ ++ return sprintf (buf, "%s = 0x%x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ ++ uint32_t set = simple_strtoul(buf, NULL, 16); \ ++ dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\ ++ return count; \ ++} ++ ++#elif defined(PCI_INTERFACE) ++ ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ ++ uint32_t val; \ ++ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ ++ return sprintf (buf, "%s = 0x%x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ ++ uint32_t set = simple_strtoul(buf, NULL, 16); \ ++ dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\ ++ return count; \ ++} ++ ++#elif defined(PLATFORM_INTERFACE) ++ ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ struct platform_device *platform_dev = \ ++ container_of(_dev, struct platform_device, dev); \ ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \ ++ uint32_t val; \ ++ DWC_PRINTF("%s(%p) -> platform_dev %p, otg_dev %p\n", \ ++ __func__, _dev, platform_dev, otg_dev); \ ++ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ ++ return sprintf (buf, "%s = 0x%x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \ ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \ ++ uint32_t set = simple_strtoul(buf, NULL, 16); \ ++ dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\ ++ return count; \ ++} ++#endif ++ ++/* ++ * MACROs for defining sysfs attribute for 32-bit registers ++ */ ++#ifdef LM_INTERFACE ++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ ++ uint32_t val; \ ++ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ ++ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ ++ uint32_t val = simple_strtoul(buf, NULL, 16); \ ++ dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \ ++ return count; \ ++} ++#elif defined(PCI_INTERFACE) ++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ ++ uint32_t val; \ ++ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ ++ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ ++ uint32_t val = simple_strtoul(buf, NULL, 16); \ ++ dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \ ++ return count; \ ++} ++ ++#elif defined(PLATFORM_INTERFACE) ++#include "dwc_otg_dbg.h" ++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \ ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \ ++ uint32_t val; \ ++ DWC_PRINTF("%s(%p) -> platform_dev %p, otg_dev %p\n", \ ++ __func__, _dev, platform_dev, otg_dev); \ ++ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ ++ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \ ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \ ++ uint32_t val = simple_strtoul(buf, NULL, 16); \ ++ dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \ ++ return count; \ ++} ++ ++#endif ++ ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_string_) \ ++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ ++DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ ++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store); ++ ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_string_) \ ++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ ++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL); ++ ++#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \ ++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ ++DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ ++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store); ++ ++#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \ ++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ ++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL); ++ ++/** @name Functions for Show/Store of Attributes */ ++/**@{*/ ++ ++/** ++ * Helper function returning the otg_device structure of the given device ++ */ ++static dwc_otg_device_t *dwc_otg_drvdev(struct device *_dev) ++{ ++ dwc_otg_device_t *otg_dev; ++ DWC_OTG_GETDRVDEV(otg_dev, _dev); ++ return otg_dev; ++} ++ ++/** ++ * Show the register offset of the Register Access. ++ */ ++static ssize_t regoffset_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ return snprintf(buf, sizeof("0xFFFFFFFF\n") + 1, "0x%08x\n", ++ otg_dev->os_dep.reg_offset); ++} ++ ++/** ++ * Set the register offset for the next Register Access Read/Write ++ */ ++static ssize_t regoffset_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t offset = simple_strtoul(buf, NULL, 16); ++#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE) ++ if (offset < SZ_256K) { ++#elif defined(PCI_INTERFACE) ++ if (offset < 0x00040000) { ++#endif ++ otg_dev->os_dep.reg_offset = offset; ++ } else { ++ dev_err(_dev, "invalid offset\n"); ++ } ++ ++ return count; ++} ++ ++DEVICE_ATTR(regoffset, S_IRUGO | S_IWUSR, regoffset_show, regoffset_store); ++ ++/** ++ * Show the value of the register at the offset in the reg_offset ++ * attribute. ++ */ ++static ssize_t regvalue_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t val; ++ volatile uint32_t *addr; ++ ++ if (otg_dev->os_dep.reg_offset != 0xFFFFFFFF && 0 != otg_dev->os_dep.base) { ++ /* Calculate the address */ ++ addr = (uint32_t *) (otg_dev->os_dep.reg_offset + ++ (uint8_t *) otg_dev->os_dep.base); ++ val = DWC_READ_REG32(addr); ++ return snprintf(buf, ++ sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n") + 1, ++ "Reg@0x%06x = 0x%08x\n", otg_dev->os_dep.reg_offset, ++ val); ++ } else { ++ dev_err(_dev, "Invalid offset (0x%0x)\n", otg_dev->os_dep.reg_offset); ++ return sprintf(buf, "invalid offset\n"); ++ } ++} ++ ++/** ++ * Store the value in the register at the offset in the reg_offset ++ * attribute. ++ * ++ */ ++static ssize_t regvalue_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ volatile uint32_t *addr; ++ uint32_t val = simple_strtoul(buf, NULL, 16); ++ //dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val); ++ if (otg_dev->os_dep.reg_offset != 0xFFFFFFFF && 0 != otg_dev->os_dep.base) { ++ /* Calculate the address */ ++ addr = (uint32_t *) (otg_dev->os_dep.reg_offset + ++ (uint8_t *) otg_dev->os_dep.base); ++ DWC_WRITE_REG32(addr, val); ++ } else { ++ dev_err(_dev, "Invalid Register Offset (0x%08x)\n", ++ otg_dev->os_dep.reg_offset); ++ } ++ return count; ++} ++ ++DEVICE_ATTR(regvalue, S_IRUGO | S_IWUSR, regvalue_show, regvalue_store); ++ ++/* ++ * Attributes ++ */ ++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode, "Mode"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable, "HNPCapable"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable, "SRPCapable"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hsic_connect, "HSIC Connect"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(inv_sel_hsic, "Invert Select HSIC"); ++ ++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode"); ++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected, "Bus Connected"); ++ ++DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl, 0, "GOTGCTL"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg, ++ &(otg_dev->core_if->core_global_regs->gusbcfg), ++ "GUSBCFG"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz, ++ &(otg_dev->core_if->core_global_regs->grxfsiz), ++ "GRXFSIZ"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz, ++ &(otg_dev->core_if->core_global_regs->gnptxfsiz), ++ "GNPTXFSIZ"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl, ++ &(otg_dev->core_if->core_global_regs->gpvndctl), ++ "GPVNDCTL"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio, ++ &(otg_dev->core_if->core_global_regs->ggpio), ++ "GGPIO"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(guid, &(otg_dev->core_if->core_global_regs->guid), ++ "GUID"); ++DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid, ++ &(otg_dev->core_if->core_global_regs->gsnpsid), ++ "GSNPSID"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed, "Device Speed"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed, "Device Enumeration Speed"); ++ ++DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz, ++ &(otg_dev->core_if->core_global_regs->hptxfsiz), ++ "HPTXFSIZ"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0, otg_dev->core_if->host_if->hprt0, "HPRT0"); ++ ++/** ++ * @todo Add code to initiate the HNP. ++ */ ++/** ++ * Show the HNP status bit ++ */ ++static ssize_t hnp_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ return sprintf(buf, "HstNegScs = 0x%x\n", ++ dwc_otg_get_hnpstatus(otg_dev->core_if)); ++} ++ ++/** ++ * Set the HNP Request bit ++ */ ++static ssize_t hnp_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t in = simple_strtoul(buf, NULL, 16); ++ dwc_otg_set_hnpreq(otg_dev->core_if, in); ++ return count; ++} ++ ++DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store); ++ ++/** ++ * @todo Add code to initiate the SRP. ++ */ ++/** ++ * Show the SRP status bit ++ */ ++static ssize_t srp_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ return sprintf(buf, "SesReqScs = 0x%x\n", ++ dwc_otg_get_srpstatus(otg_dev->core_if)); ++#else ++ return sprintf(buf, "Host Only Mode!\n"); ++#endif ++} ++ ++/** ++ * Set the SRP Request bit ++ */ ++static ssize_t srp_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ dwc_otg_pcd_initiate_srp(otg_dev->pcd); ++#endif ++ return count; ++} ++ ++DEVICE_ATTR(srp, 0644, srp_show, srp_store); ++ ++/** ++ * @todo Need to do more for power on/off? ++ */ ++/** ++ * Show the Bus Power status ++ */ ++static ssize_t buspower_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ return sprintf(buf, "Bus Power = 0x%x\n", ++ dwc_otg_get_prtpower(otg_dev->core_if)); ++} ++ ++/** ++ * Set the Bus Power status ++ */ ++static ssize_t buspower_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t on = simple_strtoul(buf, NULL, 16); ++ dwc_otg_set_prtpower(otg_dev->core_if, on); ++ return count; ++} ++ ++DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store); ++ ++/** ++ * @todo Need to do more for suspend? ++ */ ++/** ++ * Show the Bus Suspend status ++ */ ++static ssize_t bussuspend_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ return sprintf(buf, "Bus Suspend = 0x%x\n", ++ dwc_otg_get_prtsuspend(otg_dev->core_if)); ++} ++ ++/** ++ * Set the Bus Suspend status ++ */ ++static ssize_t bussuspend_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t in = simple_strtoul(buf, NULL, 16); ++ dwc_otg_set_prtsuspend(otg_dev->core_if, in); ++ return count; ++} ++ ++DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store); ++ ++/** ++ * Show the Mode Change Ready Timer status ++ */ ++static ssize_t mode_ch_tim_en_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ return sprintf(buf, "Mode Change Ready Timer Enable = 0x%x\n", ++ dwc_otg_get_mode_ch_tim(otg_dev->core_if)); ++} ++ ++/** ++ * Set the Mode Change Ready Timer status ++ */ ++static ssize_t mode_ch_tim_en_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t in = simple_strtoul(buf, NULL, 16); ++ dwc_otg_set_mode_ch_tim(otg_dev->core_if, in); ++ return count; ++} ++ ++DEVICE_ATTR(mode_ch_tim_en, 0644, mode_ch_tim_en_show, mode_ch_tim_en_store); ++ ++/** ++ * Show the value of HFIR Frame Interval bitfield ++ */ ++static ssize_t fr_interval_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ return sprintf(buf, "Frame Interval = 0x%x\n", ++ dwc_otg_get_fr_interval(otg_dev->core_if)); ++} ++ ++/** ++ * Set the HFIR Frame Interval value ++ */ ++static ssize_t fr_interval_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t in = simple_strtoul(buf, NULL, 10); ++ dwc_otg_set_fr_interval(otg_dev->core_if, in); ++ return count; ++} ++ ++DEVICE_ATTR(fr_interval, 0644, fr_interval_show, fr_interval_store); ++ ++/** ++ * Show the status of Remote Wakeup. ++ */ ++static ssize_t remote_wakeup_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ ++ return sprintf(buf, ++ "Remote Wakeup Sig = %d Enabled = %d LPM Remote Wakeup = %d\n", ++ dwc_otg_get_remotewakesig(otg_dev->core_if), ++ dwc_otg_pcd_get_rmwkup_enable(otg_dev->pcd), ++ dwc_otg_get_lpm_remotewakeenabled(otg_dev->core_if)); ++#else ++ return sprintf(buf, "Host Only Mode!\n"); ++#endif /* DWC_HOST_ONLY */ ++} ++ ++/** ++ * Initiate a remote wakeup of the host. The Device control register ++ * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable ++ * flag is set. ++ * ++ */ ++static ssize_t remote_wakeup_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t val = simple_strtoul(buf, NULL, 16); ++ ++ if (val & 1) { ++ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1); ++ } else { ++ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0); ++ } ++#endif /* DWC_HOST_ONLY */ ++ return count; ++} ++ ++DEVICE_ATTR(remote_wakeup, S_IRUGO | S_IWUSR, remote_wakeup_show, ++ remote_wakeup_store); ++ ++/** ++ * Show the whether core is hibernated or not. ++ */ ++static ssize_t rem_wakeup_pwrdn_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ ++ if (dwc_otg_get_core_state(otg_dev->core_if)) { ++ DWC_PRINTF("Core is in hibernation\n"); ++ } else { ++ DWC_PRINTF("Core is not in hibernation\n"); ++ } ++#endif /* DWC_HOST_ONLY */ ++ return 0; ++} ++ ++extern int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if, ++ int rem_wakeup, int reset); ++ ++/** ++ * Initiate a remote wakeup of the device to exit from hibernation. ++ */ ++static ssize_t rem_wakeup_pwrdn_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ dwc_otg_device_hibernation_restore(otg_dev->core_if, 1, 0); ++#endif ++ return count; ++} ++ ++DEVICE_ATTR(rem_wakeup_pwrdn, S_IRUGO | S_IWUSR, rem_wakeup_pwrdn_show, ++ rem_wakeup_pwrdn_store); ++ ++static ssize_t disconnect_us(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t val = simple_strtoul(buf, NULL, 16); ++ DWC_PRINTF("The Passed value is %04x\n", val); ++ ++ dwc_otg_pcd_disconnect_us(otg_dev->pcd, 50); ++ ++#endif /* DWC_HOST_ONLY */ ++ return count; ++} ++ ++DEVICE_ATTR(disconnect_us, S_IWUSR, 0, disconnect_us); ++ ++/** ++ * Dump global registers and either host or device registers (depending on the ++ * current mode of the core). ++ */ ++static ssize_t regdump_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ ++ dwc_otg_dump_global_registers(otg_dev->core_if); ++ if (dwc_otg_is_host_mode(otg_dev->core_if)) { ++ dwc_otg_dump_host_registers(otg_dev->core_if); ++ } else { ++ dwc_otg_dump_dev_registers(otg_dev->core_if); ++ ++ } ++ return sprintf(buf, "Register Dump\n"); ++} ++ ++DEVICE_ATTR(regdump, S_IRUGO | S_IWUSR, regdump_show, 0); ++ ++/** ++ * Dump global registers and either host or device registers (depending on the ++ * current mode of the core). ++ */ ++static ssize_t spramdump_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ ++ dwc_otg_dump_spram(otg_dev->core_if); ++ ++ return sprintf(buf, "SPRAM Dump\n"); ++} ++ ++DEVICE_ATTR(spramdump, S_IRUGO | S_IWUSR, spramdump_show, 0); ++ ++/** ++ * Dump the current hcd state. ++ */ ++static ssize_t hcddump_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifndef DWC_DEVICE_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ dwc_otg_hcd_dump_state(otg_dev->hcd); ++#endif /* DWC_DEVICE_ONLY */ ++ return sprintf(buf, "HCD Dump\n"); ++} ++ ++DEVICE_ATTR(hcddump, S_IRUGO | S_IWUSR, hcddump_show, 0); ++ ++/** ++ * Dump the average frame remaining at SOF. This can be used to ++ * determine average interrupt latency. Frame remaining is also shown for ++ * start transfer and two additional sample points. ++ */ ++static ssize_t hcd_frrem_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifndef DWC_DEVICE_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ ++ dwc_otg_hcd_dump_frrem(otg_dev->hcd); ++#endif /* DWC_DEVICE_ONLY */ ++ return sprintf(buf, "HCD Dump Frame Remaining\n"); ++} ++ ++DEVICE_ATTR(hcd_frrem, S_IRUGO | S_IWUSR, hcd_frrem_show, 0); ++ ++/** ++ * Displays the time required to read the GNPTXFSIZ register many times (the ++ * output shows the number of times the register is read). ++ */ ++#define RW_REG_COUNT 10000000 ++#define MSEC_PER_JIFFIE 1000/HZ ++static ssize_t rd_reg_test_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ int i; ++ int time; ++ int start_jiffies; ++ ++ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n", ++ HZ, MSEC_PER_JIFFIE, loops_per_jiffy); ++ start_jiffies = jiffies; ++ for (i = 0; i < RW_REG_COUNT; i++) { ++ dwc_otg_get_gnptxfsiz(otg_dev->core_if); ++ } ++ time = jiffies - start_jiffies; ++ return sprintf(buf, ++ "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n", ++ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time); ++} ++ ++DEVICE_ATTR(rd_reg_test, S_IRUGO | S_IWUSR, rd_reg_test_show, 0); ++ ++/** ++ * Displays the time required to write the GNPTXFSIZ register many times (the ++ * output shows the number of times the register is written). ++ */ ++static ssize_t wr_reg_test_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t reg_val; ++ int i; ++ int time; ++ int start_jiffies; ++ ++ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n", ++ HZ, MSEC_PER_JIFFIE, loops_per_jiffy); ++ reg_val = dwc_otg_get_gnptxfsiz(otg_dev->core_if); ++ start_jiffies = jiffies; ++ for (i = 0; i < RW_REG_COUNT; i++) { ++ dwc_otg_set_gnptxfsiz(otg_dev->core_if, reg_val); ++ } ++ time = jiffies - start_jiffies; ++ return sprintf(buf, ++ "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n", ++ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time); ++} ++ ++DEVICE_ATTR(wr_reg_test, S_IRUGO | S_IWUSR, wr_reg_test_show, 0); ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ ++/** ++* Show the lpm_response attribute. ++*/ ++static ssize_t lpmresp_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ ++ if (!dwc_otg_get_param_lpm_enable(otg_dev->core_if)) ++ return sprintf(buf, "** LPM is DISABLED **\n"); ++ ++ if (!dwc_otg_is_device_mode(otg_dev->core_if)) { ++ return sprintf(buf, "** Current mode is not device mode\n"); ++ } ++ return sprintf(buf, "lpm_response = %d\n", ++ dwc_otg_get_lpmresponse(otg_dev->core_if)); ++} ++ ++/** ++* Store the lpm_response attribute. ++*/ ++static ssize_t lpmresp_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t val = simple_strtoul(buf, NULL, 16); ++ ++ if (!dwc_otg_get_param_lpm_enable(otg_dev->core_if)) { ++ return 0; ++ } ++ ++ if (!dwc_otg_is_device_mode(otg_dev->core_if)) { ++ return 0; ++ } ++ ++ dwc_otg_set_lpmresponse(otg_dev->core_if, val); ++ return count; ++} ++ ++DEVICE_ATTR(lpm_response, S_IRUGO | S_IWUSR, lpmresp_show, lpmresp_store); ++ ++/** ++* Show the sleep_status attribute. ++*/ ++static ssize_t sleepstatus_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ return sprintf(buf, "Sleep Status = %d\n", ++ dwc_otg_get_lpm_portsleepstatus(otg_dev->core_if)); ++} ++ ++/** ++ * Store the sleep_status attribure. ++ */ ++static ssize_t sleepstatus_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ dwc_otg_core_if_t *core_if = otg_dev->core_if; ++ ++ if (dwc_otg_get_lpm_portsleepstatus(otg_dev->core_if)) { ++ if (dwc_otg_is_host_mode(core_if)) { ++ ++ DWC_PRINTF("Host initiated resume\n"); ++ dwc_otg_set_prtresume(otg_dev->core_if, 1); ++ } ++ } ++ ++ return count; ++} ++ ++DEVICE_ATTR(sleep_status, S_IRUGO | S_IWUSR, sleepstatus_show, ++ sleepstatus_store); ++ ++#endif /* CONFIG_USB_DWC_OTG_LPM_ENABLE */ ++ ++/**@}*/ ++ ++/** ++ * Create the device files ++ */ ++void dwc_otg_attr_create( ++#ifdef LM_INTERFACE ++ struct lm_device *dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *dev ++#endif ++ ) ++{ ++ int error; ++ ++ error = device_create_file(&dev->dev, &dev_attr_regoffset); ++ error = device_create_file(&dev->dev, &dev_attr_regvalue); ++ error = device_create_file(&dev->dev, &dev_attr_mode); ++ error = device_create_file(&dev->dev, &dev_attr_hnpcapable); ++ error = device_create_file(&dev->dev, &dev_attr_srpcapable); ++ error = device_create_file(&dev->dev, &dev_attr_hsic_connect); ++ error = device_create_file(&dev->dev, &dev_attr_inv_sel_hsic); ++ error = device_create_file(&dev->dev, &dev_attr_hnp); ++ error = device_create_file(&dev->dev, &dev_attr_srp); ++ error = device_create_file(&dev->dev, &dev_attr_buspower); ++ error = device_create_file(&dev->dev, &dev_attr_bussuspend); ++ error = device_create_file(&dev->dev, &dev_attr_mode_ch_tim_en); ++ error = device_create_file(&dev->dev, &dev_attr_fr_interval); ++ error = device_create_file(&dev->dev, &dev_attr_busconnected); ++ error = device_create_file(&dev->dev, &dev_attr_gotgctl); ++ error = device_create_file(&dev->dev, &dev_attr_gusbcfg); ++ error = device_create_file(&dev->dev, &dev_attr_grxfsiz); ++ error = device_create_file(&dev->dev, &dev_attr_gnptxfsiz); ++ error = device_create_file(&dev->dev, &dev_attr_gpvndctl); ++ error = device_create_file(&dev->dev, &dev_attr_ggpio); ++ error = device_create_file(&dev->dev, &dev_attr_guid); ++ error = device_create_file(&dev->dev, &dev_attr_gsnpsid); ++ error = device_create_file(&dev->dev, &dev_attr_devspeed); ++ error = device_create_file(&dev->dev, &dev_attr_enumspeed); ++ error = device_create_file(&dev->dev, &dev_attr_hptxfsiz); ++ error = device_create_file(&dev->dev, &dev_attr_hprt0); ++ error = device_create_file(&dev->dev, &dev_attr_remote_wakeup); ++ error = device_create_file(&dev->dev, &dev_attr_rem_wakeup_pwrdn); ++ error = device_create_file(&dev->dev, &dev_attr_disconnect_us); ++ error = device_create_file(&dev->dev, &dev_attr_regdump); ++ error = device_create_file(&dev->dev, &dev_attr_spramdump); ++ error = device_create_file(&dev->dev, &dev_attr_hcddump); ++ error = device_create_file(&dev->dev, &dev_attr_hcd_frrem); ++ error = device_create_file(&dev->dev, &dev_attr_rd_reg_test); ++ error = device_create_file(&dev->dev, &dev_attr_wr_reg_test); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ error = device_create_file(&dev->dev, &dev_attr_lpm_response); ++ error = device_create_file(&dev->dev, &dev_attr_sleep_status); ++#endif ++} ++ ++/** ++ * Remove the device files ++ */ ++void dwc_otg_attr_remove( ++#ifdef LM_INTERFACE ++ struct lm_device *dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *dev ++#endif ++ ) ++{ ++ device_remove_file(&dev->dev, &dev_attr_regoffset); ++ device_remove_file(&dev->dev, &dev_attr_regvalue); ++ device_remove_file(&dev->dev, &dev_attr_mode); ++ device_remove_file(&dev->dev, &dev_attr_hnpcapable); ++ device_remove_file(&dev->dev, &dev_attr_srpcapable); ++ device_remove_file(&dev->dev, &dev_attr_hsic_connect); ++ device_remove_file(&dev->dev, &dev_attr_inv_sel_hsic); ++ device_remove_file(&dev->dev, &dev_attr_hnp); ++ device_remove_file(&dev->dev, &dev_attr_srp); ++ device_remove_file(&dev->dev, &dev_attr_buspower); ++ device_remove_file(&dev->dev, &dev_attr_bussuspend); ++ device_remove_file(&dev->dev, &dev_attr_mode_ch_tim_en); ++ device_remove_file(&dev->dev, &dev_attr_fr_interval); ++ device_remove_file(&dev->dev, &dev_attr_busconnected); ++ device_remove_file(&dev->dev, &dev_attr_gotgctl); ++ device_remove_file(&dev->dev, &dev_attr_gusbcfg); ++ device_remove_file(&dev->dev, &dev_attr_grxfsiz); ++ device_remove_file(&dev->dev, &dev_attr_gnptxfsiz); ++ device_remove_file(&dev->dev, &dev_attr_gpvndctl); ++ device_remove_file(&dev->dev, &dev_attr_ggpio); ++ device_remove_file(&dev->dev, &dev_attr_guid); ++ device_remove_file(&dev->dev, &dev_attr_gsnpsid); ++ device_remove_file(&dev->dev, &dev_attr_devspeed); ++ device_remove_file(&dev->dev, &dev_attr_enumspeed); ++ device_remove_file(&dev->dev, &dev_attr_hptxfsiz); ++ device_remove_file(&dev->dev, &dev_attr_hprt0); ++ device_remove_file(&dev->dev, &dev_attr_remote_wakeup); ++ device_remove_file(&dev->dev, &dev_attr_rem_wakeup_pwrdn); ++ device_remove_file(&dev->dev, &dev_attr_disconnect_us); ++ device_remove_file(&dev->dev, &dev_attr_regdump); ++ device_remove_file(&dev->dev, &dev_attr_spramdump); ++ device_remove_file(&dev->dev, &dev_attr_hcddump); ++ device_remove_file(&dev->dev, &dev_attr_hcd_frrem); ++ device_remove_file(&dev->dev, &dev_attr_rd_reg_test); ++ device_remove_file(&dev->dev, &dev_attr_wr_reg_test); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ device_remove_file(&dev->dev, &dev_attr_lpm_response); ++ device_remove_file(&dev->dev, &dev_attr_sleep_status); ++#endif ++} +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_attr.h +@@ -0,0 +1,89 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.h $ ++ * $Revision: #13 $ ++ * $Date: 2010/06/21 $ ++ * $Change: 1532021 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#if !defined(__DWC_OTG_ATTR_H__) ++#define __DWC_OTG_ATTR_H__ ++ ++/** @file ++ * This file contains the interface to the Linux device attributes. ++ */ ++extern struct device_attribute dev_attr_regoffset; ++extern struct device_attribute dev_attr_regvalue; ++ ++extern struct device_attribute dev_attr_mode; ++extern struct device_attribute dev_attr_hnpcapable; ++extern struct device_attribute dev_attr_srpcapable; ++extern struct device_attribute dev_attr_hnp; ++extern struct device_attribute dev_attr_srp; ++extern struct device_attribute dev_attr_buspower; ++extern struct device_attribute dev_attr_bussuspend; ++extern struct device_attribute dev_attr_mode_ch_tim_en; ++extern struct device_attribute dev_attr_fr_interval; ++extern struct device_attribute dev_attr_busconnected; ++extern struct device_attribute dev_attr_gotgctl; ++extern struct device_attribute dev_attr_gusbcfg; ++extern struct device_attribute dev_attr_grxfsiz; ++extern struct device_attribute dev_attr_gnptxfsiz; ++extern struct device_attribute dev_attr_gpvndctl; ++extern struct device_attribute dev_attr_ggpio; ++extern struct device_attribute dev_attr_guid; ++extern struct device_attribute dev_attr_gsnpsid; ++extern struct device_attribute dev_attr_devspeed; ++extern struct device_attribute dev_attr_enumspeed; ++extern struct device_attribute dev_attr_hptxfsiz; ++extern struct device_attribute dev_attr_hprt0; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++extern struct device_attribute dev_attr_lpm_response; ++extern struct device_attribute devi_attr_sleep_status; ++#endif ++ ++void dwc_otg_attr_create( ++#ifdef LM_INTERFACE ++ struct lm_device *dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *dev ++#endif ++ ); ++ ++void dwc_otg_attr_remove( ++#ifdef LM_INTERFACE ++ struct lm_device *dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *dev ++#endif ++ ); ++#endif +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_cfi.c +@@ -0,0 +1,1876 @@ ++/* ========================================================================== ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++/** @file ++ * ++ * This file contains the most of the CFI(Core Feature Interface) ++ * implementation for the OTG. ++ */ ++ ++#ifdef DWC_UTE_CFI ++ ++#include "dwc_otg_pcd.h" ++#include "dwc_otg_cfi.h" ++ ++/** This definition should actually migrate to the Portability Library */ ++#define DWC_CONSTANT_CPU_TO_LE16(x) (x) ++ ++extern dwc_otg_pcd_ep_t *get_ep_by_addr(dwc_otg_pcd_t * pcd, u16 wIndex); ++ ++static int cfi_core_features_buf(uint8_t * buf, uint16_t buflen); ++static int cfi_get_feature_value(uint8_t * buf, uint16_t buflen, ++ struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *ctrl_req); ++static int cfi_set_feature_value(struct dwc_otg_pcd *pcd); ++static int cfi_ep_get_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req); ++static int cfi_ep_get_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req); ++static int cfi_ep_get_align_val(uint8_t * buf, struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req); ++static int cfi_preproc_reset(struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req); ++static void cfi_free_ep_bs_dyn_data(cfi_ep_t * cfiep); ++ ++static uint16_t get_dfifo_size(dwc_otg_core_if_t * core_if); ++static int32_t get_rxfifo_size(dwc_otg_core_if_t * core_if, uint16_t wValue); ++static int32_t get_txfifo_size(struct dwc_otg_pcd *pcd, uint16_t wValue); ++ ++static uint8_t resize_fifos(dwc_otg_core_if_t * core_if); ++ ++/** This is the header of the all features descriptor */ ++static cfi_all_features_header_t all_props_desc_header = { ++ .wVersion = DWC_CONSTANT_CPU_TO_LE16(0x100), ++ .wCoreID = DWC_CONSTANT_CPU_TO_LE16(CFI_CORE_ID_OTG), ++ .wNumFeatures = DWC_CONSTANT_CPU_TO_LE16(9), ++}; ++ ++/** This is an array of statically allocated feature descriptors */ ++static cfi_feature_desc_header_t prop_descs[] = { ++ ++ /* FT_ID_DMA_MODE */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_MODE), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(1), ++ }, ++ ++ /* FT_ID_DMA_BUFFER_SETUP */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_BUFFER_SETUP), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6), ++ }, ++ ++ /* FT_ID_DMA_BUFF_ALIGN */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_BUFF_ALIGN), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2), ++ }, ++ ++ /* FT_ID_DMA_CONCAT_SETUP */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_CONCAT_SETUP), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ //.wDataLength = DWC_CONSTANT_CPU_TO_LE16(6), ++ }, ++ ++ /* FT_ID_DMA_CIRCULAR */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_CIRCULAR), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6), ++ }, ++ ++ /* FT_ID_THRESHOLD_SETUP */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_THRESHOLD_SETUP), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6), ++ }, ++ ++ /* FT_ID_DFIFO_DEPTH */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DFIFO_DEPTH), ++ .bmAttributes = CFI_FEATURE_ATTR_RO, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2), ++ }, ++ ++ /* FT_ID_TX_FIFO_DEPTH */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_TX_FIFO_DEPTH), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2), ++ }, ++ ++ /* FT_ID_RX_FIFO_DEPTH */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_RX_FIFO_DEPTH), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2), ++ } ++}; ++ ++/** The table of feature names */ ++cfi_string_t prop_name_table[] = { ++ {FT_ID_DMA_MODE, "dma_mode"}, ++ {FT_ID_DMA_BUFFER_SETUP, "buffer_setup"}, ++ {FT_ID_DMA_BUFF_ALIGN, "buffer_align"}, ++ {FT_ID_DMA_CONCAT_SETUP, "concat_setup"}, ++ {FT_ID_DMA_CIRCULAR, "buffer_circular"}, ++ {FT_ID_THRESHOLD_SETUP, "threshold_setup"}, ++ {FT_ID_DFIFO_DEPTH, "dfifo_depth"}, ++ {FT_ID_TX_FIFO_DEPTH, "txfifo_depth"}, ++ {FT_ID_RX_FIFO_DEPTH, "rxfifo_depth"}, ++ {} ++}; ++ ++/************************************************************************/ ++ ++/** ++ * Returns the name of the feature by its ID ++ * or NULL if no featute ID matches. ++ * ++ */ ++const uint8_t *get_prop_name(uint16_t prop_id, int *len) ++{ ++ cfi_string_t *pstr; ++ *len = 0; ++ ++ for (pstr = prop_name_table; pstr && pstr->s; pstr++) { ++ if (pstr->id == prop_id) { ++ *len = DWC_STRLEN(pstr->s); ++ return pstr->s; ++ } ++ } ++ return NULL; ++} ++ ++/** ++ * This function handles all CFI specific control requests. ++ * ++ * Return a negative value to stall the DCE. ++ */ ++int cfi_setup(struct dwc_otg_pcd *pcd, struct cfi_usb_ctrlrequest *ctrl) ++{ ++ int retval = 0; ++ dwc_otg_pcd_ep_t *ep = NULL; ++ cfiobject_t *cfi = pcd->cfi; ++ struct dwc_otg_core_if *coreif = GET_CORE_IF(pcd); ++ uint16_t wLen = DWC_LE16_TO_CPU(&ctrl->wLength); ++ uint16_t wValue = DWC_LE16_TO_CPU(&ctrl->wValue); ++ uint16_t wIndex = DWC_LE16_TO_CPU(&ctrl->wIndex); ++ uint32_t regaddr = 0; ++ uint32_t regval = 0; ++ ++ /* Save this Control Request in the CFI object. ++ * The data field will be assigned in the data stage completion CB function. ++ */ ++ cfi->ctrl_req = *ctrl; ++ cfi->ctrl_req.data = NULL; ++ ++ cfi->need_gadget_att = 0; ++ cfi->need_status_in_complete = 0; ++ ++ switch (ctrl->bRequest) { ++ case VEN_CORE_GET_FEATURES: ++ retval = cfi_core_features_buf(cfi->buf_in.buf, CFI_IN_BUF_LEN); ++ if (retval >= 0) { ++ //dump_msg(cfi->buf_in.buf, retval); ++ ep = &pcd->ep0; ++ ++ retval = min((uint16_t) retval, wLen); ++ /* Transfer this buffer to the host through the EP0-IN EP */ ++ ep->dwc_ep.dma_addr = cfi->buf_in.addr; ++ ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf; ++ ep->dwc_ep.xfer_buff = cfi->buf_in.buf; ++ ep->dwc_ep.xfer_len = retval; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ pcd->ep0_pending = 1; ++ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); ++ } ++ retval = 0; ++ break; ++ ++ case VEN_CORE_GET_FEATURE: ++ CFI_INFO("VEN_CORE_GET_FEATURE\n"); ++ retval = cfi_get_feature_value(cfi->buf_in.buf, CFI_IN_BUF_LEN, ++ pcd, ctrl); ++ if (retval >= 0) { ++ ep = &pcd->ep0; ++ ++ retval = min((uint16_t) retval, wLen); ++ /* Transfer this buffer to the host through the EP0-IN EP */ ++ ep->dwc_ep.dma_addr = cfi->buf_in.addr; ++ ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf; ++ ep->dwc_ep.xfer_buff = cfi->buf_in.buf; ++ ep->dwc_ep.xfer_len = retval; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ pcd->ep0_pending = 1; ++ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); ++ } ++ CFI_INFO("VEN_CORE_GET_FEATURE=%d\n", retval); ++ dump_msg(cfi->buf_in.buf, retval); ++ break; ++ ++ case VEN_CORE_SET_FEATURE: ++ CFI_INFO("VEN_CORE_SET_FEATURE\n"); ++ /* Set up an XFER to get the data stage of the control request, ++ * which is the new value of the feature to be modified. ++ */ ++ ep = &pcd->ep0; ++ ep->dwc_ep.is_in = 0; ++ ep->dwc_ep.dma_addr = cfi->buf_out.addr; ++ ep->dwc_ep.start_xfer_buff = cfi->buf_out.buf; ++ ep->dwc_ep.xfer_buff = cfi->buf_out.buf; ++ ep->dwc_ep.xfer_len = wLen; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ pcd->ep0_pending = 1; ++ /* Read the control write's data stage */ ++ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); ++ retval = 0; ++ break; ++ ++ case VEN_CORE_RESET_FEATURES: ++ CFI_INFO("VEN_CORE_RESET_FEATURES\n"); ++ cfi->need_gadget_att = 1; ++ cfi->need_status_in_complete = 1; ++ retval = cfi_preproc_reset(pcd, ctrl); ++ CFI_INFO("VEN_CORE_RESET_FEATURES = (%d)\n", retval); ++ break; ++ ++ case VEN_CORE_ACTIVATE_FEATURES: ++ CFI_INFO("VEN_CORE_ACTIVATE_FEATURES\n"); ++ break; ++ ++ case VEN_CORE_READ_REGISTER: ++ CFI_INFO("VEN_CORE_READ_REGISTER\n"); ++ /* wValue optionally contains the HI WORD of the register offset and ++ * wIndex contains the LOW WORD of the register offset ++ */ ++ if (wValue == 0) { ++ /* @TODO - MAS - fix the access to the base field */ ++ regaddr = 0; ++ //regaddr = (uint32_t) pcd->otg_dev->os_dep.base; ++ //GET_CORE_IF(pcd)->co ++ regaddr |= wIndex; ++ } else { ++ regaddr = (wValue << 16) | wIndex; ++ } ++ ++ /* Read a 32-bit value of the memory at the regaddr */ ++ regval = DWC_READ_REG32((uint32_t *) regaddr); ++ ++ ep = &pcd->ep0; ++ dwc_memcpy(cfi->buf_in.buf, ®val, sizeof(uint32_t)); ++ ep->dwc_ep.is_in = 1; ++ ep->dwc_ep.dma_addr = cfi->buf_in.addr; ++ ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf; ++ ep->dwc_ep.xfer_buff = cfi->buf_in.buf; ++ ep->dwc_ep.xfer_len = wLen; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ pcd->ep0_pending = 1; ++ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); ++ cfi->need_gadget_att = 0; ++ retval = 0; ++ break; ++ ++ case VEN_CORE_WRITE_REGISTER: ++ CFI_INFO("VEN_CORE_WRITE_REGISTER\n"); ++ /* Set up an XFER to get the data stage of the control request, ++ * which is the new value of the register to be modified. ++ */ ++ ep = &pcd->ep0; ++ ep->dwc_ep.is_in = 0; ++ ep->dwc_ep.dma_addr = cfi->buf_out.addr; ++ ep->dwc_ep.start_xfer_buff = cfi->buf_out.buf; ++ ep->dwc_ep.xfer_buff = cfi->buf_out.buf; ++ ep->dwc_ep.xfer_len = wLen; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ pcd->ep0_pending = 1; ++ /* Read the control write's data stage */ ++ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); ++ retval = 0; ++ break; ++ ++ default: ++ retval = -DWC_E_NOT_SUPPORTED; ++ break; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function prepares the core features descriptors and copies its ++ * raw representation into the buffer <buf>. ++ * ++ * The buffer structure is as follows: ++ * all_features_header (8 bytes) ++ * features_#1 (8 bytes + feature name string length) ++ * features_#2 (8 bytes + feature name string length) ++ * ..... ++ * features_#n - where n=the total count of feature descriptors ++ */ ++static int cfi_core_features_buf(uint8_t * buf, uint16_t buflen) ++{ ++ cfi_feature_desc_header_t *prop_hdr = prop_descs; ++ cfi_feature_desc_header_t *prop; ++ cfi_all_features_header_t *all_props_hdr = &all_props_desc_header; ++ cfi_all_features_header_t *tmp; ++ uint8_t *tmpbuf = buf; ++ const uint8_t *pname = NULL; ++ int i, j, namelen = 0, totlen; ++ ++ /* Prepare and copy the core features into the buffer */ ++ CFI_INFO("%s:\n", __func__); ++ ++ tmp = (cfi_all_features_header_t *) tmpbuf; ++ *tmp = *all_props_hdr; ++ tmpbuf += CFI_ALL_FEATURES_HDR_LEN; ++ ++ j = sizeof(prop_descs) / sizeof(cfi_all_features_header_t); ++ for (i = 0; i < j; i++, prop_hdr++) { ++ pname = get_prop_name(prop_hdr->wFeatureID, &namelen); ++ prop = (cfi_feature_desc_header_t *) tmpbuf; ++ *prop = *prop_hdr; ++ ++ prop->bNameLen = namelen; ++ prop->wLength = ++ DWC_CONSTANT_CPU_TO_LE16(CFI_FEATURE_DESC_HDR_LEN + ++ namelen); ++ ++ tmpbuf += CFI_FEATURE_DESC_HDR_LEN; ++ dwc_memcpy(tmpbuf, pname, namelen); ++ tmpbuf += namelen; ++ } ++ ++ totlen = tmpbuf - buf; ++ ++ if (totlen > 0) { ++ tmp = (cfi_all_features_header_t *) buf; ++ tmp->wTotalLen = DWC_CONSTANT_CPU_TO_LE16(totlen); ++ } ++ ++ return totlen; ++} ++ ++/** ++ * This function releases all the dynamic memory in the CFI object. ++ */ ++static void cfi_release(cfiobject_t * cfiobj) ++{ ++ cfi_ep_t *cfiep; ++ dwc_list_link_t *tmp; ++ ++ CFI_INFO("%s\n", __func__); ++ ++ if (cfiobj->buf_in.buf) { ++ DWC_DMA_FREE(CFI_IN_BUF_LEN, cfiobj->buf_in.buf, ++ cfiobj->buf_in.addr); ++ cfiobj->buf_in.buf = NULL; ++ } ++ ++ if (cfiobj->buf_out.buf) { ++ DWC_DMA_FREE(CFI_OUT_BUF_LEN, cfiobj->buf_out.buf, ++ cfiobj->buf_out.addr); ++ cfiobj->buf_out.buf = NULL; ++ } ++ ++ /* Free the Buffer Setup values for each EP */ ++ //list_for_each_entry(cfiep, &cfiobj->active_eps, lh) { ++ DWC_LIST_FOREACH(tmp, &cfiobj->active_eps) { ++ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ cfi_free_ep_bs_dyn_data(cfiep); ++ } ++} ++ ++/** ++ * This function frees the dynamically allocated EP buffer setup data. ++ */ ++static void cfi_free_ep_bs_dyn_data(cfi_ep_t * cfiep) ++{ ++ if (cfiep->bm_sg) { ++ DWC_FREE(cfiep->bm_sg); ++ cfiep->bm_sg = NULL; ++ } ++ ++ if (cfiep->bm_align) { ++ DWC_FREE(cfiep->bm_align); ++ cfiep->bm_align = NULL; ++ } ++ ++ if (cfiep->bm_concat) { ++ if (NULL != cfiep->bm_concat->wTxBytes) { ++ DWC_FREE(cfiep->bm_concat->wTxBytes); ++ cfiep->bm_concat->wTxBytes = NULL; ++ } ++ DWC_FREE(cfiep->bm_concat); ++ cfiep->bm_concat = NULL; ++ } ++} ++ ++/** ++ * This function initializes the default values of the features ++ * for a specific endpoint and should be called only once when ++ * the EP is enabled first time. ++ */ ++static int cfi_ep_init_defaults(struct dwc_otg_pcd *pcd, cfi_ep_t * cfiep) ++{ ++ int retval = 0; ++ ++ cfiep->bm_sg = DWC_ALLOC(sizeof(ddma_sg_buffer_setup_t)); ++ if (NULL == cfiep->bm_sg) { ++ CFI_INFO("Failed to allocate memory for SG feature value\n"); ++ return -DWC_E_NO_MEMORY; ++ } ++ dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t)); ++ ++ /* For the Concatenation feature's default value we do not allocate ++ * memory for the wTxBytes field - it will be done in the set_feature_value ++ * request handler. ++ */ ++ cfiep->bm_concat = DWC_ALLOC(sizeof(ddma_concat_buffer_setup_t)); ++ if (NULL == cfiep->bm_concat) { ++ CFI_INFO ++ ("Failed to allocate memory for CONCATENATION feature value\n"); ++ DWC_FREE(cfiep->bm_sg); ++ return -DWC_E_NO_MEMORY; ++ } ++ dwc_memset(cfiep->bm_concat, 0, sizeof(ddma_concat_buffer_setup_t)); ++ ++ cfiep->bm_align = DWC_ALLOC(sizeof(ddma_align_buffer_setup_t)); ++ if (NULL == cfiep->bm_align) { ++ CFI_INFO ++ ("Failed to allocate memory for Alignment feature value\n"); ++ DWC_FREE(cfiep->bm_sg); ++ DWC_FREE(cfiep->bm_concat); ++ return -DWC_E_NO_MEMORY; ++ } ++ dwc_memset(cfiep->bm_align, 0, sizeof(ddma_align_buffer_setup_t)); ++ ++ return retval; ++} ++ ++/** ++ * The callback function that notifies the CFI on the activation of ++ * an endpoint in the PCD. The following steps are done in this function: ++ * ++ * Create a dynamically allocated cfi_ep_t object (a CFI wrapper to the PCD's ++ * active endpoint) ++ * Create MAX_DMA_DESCS_PER_EP count DMA Descriptors for the EP ++ * Set the Buffer Mode to standard ++ * Initialize the default values for all EP modes (SG, Circular, Concat, Align) ++ * Add the cfi_ep_t object to the list of active endpoints in the CFI object ++ */ ++static int cfi_ep_enable(struct cfiobject *cfi, struct dwc_otg_pcd *pcd, ++ struct dwc_otg_pcd_ep *ep) ++{ ++ cfi_ep_t *cfiep; ++ int retval = -DWC_E_NOT_SUPPORTED; ++ ++ CFI_INFO("%s: epname=%s; epnum=0x%02x\n", __func__, ++ "EP_" /*ep->ep.name */ , ep->desc->bEndpointAddress); ++ /* MAS - Check whether this endpoint already is in the list */ ++ cfiep = get_cfi_ep_by_pcd_ep(cfi, ep); ++ ++ if (NULL == cfiep) { ++ /* Allocate a cfi_ep_t object */ ++ cfiep = DWC_ALLOC(sizeof(cfi_ep_t)); ++ if (NULL == cfiep) { ++ CFI_INFO ++ ("Unable to allocate memory for <cfiep> in function %s\n", ++ __func__); ++ return -DWC_E_NO_MEMORY; ++ } ++ dwc_memset(cfiep, 0, sizeof(cfi_ep_t)); ++ ++ /* Save the dwc_otg_pcd_ep pointer in the cfiep object */ ++ cfiep->ep = ep; ++ ++ /* Allocate the DMA Descriptors chain of MAX_DMA_DESCS_PER_EP count */ ++ ep->dwc_ep.descs = ++ DWC_DMA_ALLOC(MAX_DMA_DESCS_PER_EP * ++ sizeof(dwc_otg_dma_desc_t), ++ &ep->dwc_ep.descs_dma_addr); ++ ++ if (NULL == ep->dwc_ep.descs) { ++ DWC_FREE(cfiep); ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ DWC_LIST_INIT(&cfiep->lh); ++ ++ /* Set the buffer mode to BM_STANDARD. It will be modified ++ * when building descriptors for a specific buffer mode */ ++ ep->dwc_ep.buff_mode = BM_STANDARD; ++ ++ /* Create and initialize the default values for this EP's Buffer modes */ ++ if ((retval = cfi_ep_init_defaults(pcd, cfiep)) < 0) ++ return retval; ++ ++ /* Add the cfi_ep_t object to the CFI object's list of active endpoints */ ++ DWC_LIST_INSERT_TAIL(&cfi->active_eps, &cfiep->lh); ++ retval = 0; ++ } else { /* The sought EP already is in the list */ ++ CFI_INFO("%s: The sought EP already is in the list\n", ++ __func__); ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function is called when the data stage of a 3-stage Control Write request ++ * is complete. ++ * ++ */ ++static int cfi_ctrl_write_complete(struct cfiobject *cfi, ++ struct dwc_otg_pcd *pcd) ++{ ++ uint32_t addr, reg_value; ++ uint16_t wIndex, wValue; ++ uint8_t bRequest; ++ uint8_t *buf = cfi->buf_out.buf; ++ //struct usb_ctrlrequest *ctrl_req = &cfi->ctrl_req_saved; ++ struct cfi_usb_ctrlrequest *ctrl_req = &cfi->ctrl_req; ++ int retval = -DWC_E_NOT_SUPPORTED; ++ ++ CFI_INFO("%s\n", __func__); ++ ++ bRequest = ctrl_req->bRequest; ++ wIndex = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wIndex); ++ wValue = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wValue); ++ ++ /* ++ * Save the pointer to the data stage in the ctrl_req's <data> field. ++ * The request should be already saved in the command stage by now. ++ */ ++ ctrl_req->data = cfi->buf_out.buf; ++ cfi->need_status_in_complete = 0; ++ cfi->need_gadget_att = 0; ++ ++ switch (bRequest) { ++ case VEN_CORE_WRITE_REGISTER: ++ /* The buffer contains raw data of the new value for the register */ ++ reg_value = *((uint32_t *) buf); ++ if (wValue == 0) { ++ addr = 0; ++ //addr = (uint32_t) pcd->otg_dev->os_dep.base; ++ addr += wIndex; ++ } else { ++ addr = (wValue << 16) | wIndex; ++ } ++ ++ //writel(reg_value, addr); ++ ++ retval = 0; ++ cfi->need_status_in_complete = 1; ++ break; ++ ++ case VEN_CORE_SET_FEATURE: ++ /* The buffer contains raw data of the new value of the feature */ ++ retval = cfi_set_feature_value(pcd); ++ if (retval < 0) ++ return retval; ++ ++ cfi->need_status_in_complete = 1; ++ break; ++ ++ default: ++ break; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function builds the DMA descriptors for the SG buffer mode. ++ */ ++static void cfi_build_sg_descs(struct cfiobject *cfi, cfi_ep_t * cfiep, ++ dwc_otg_pcd_request_t * req) ++{ ++ struct dwc_otg_pcd_ep *ep = cfiep->ep; ++ ddma_sg_buffer_setup_t *sgval = cfiep->bm_sg; ++ struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs; ++ struct dwc_otg_dma_desc *desc_last = cfiep->ep->dwc_ep.descs; ++ dma_addr_t buff_addr = req->dma; ++ int i; ++ uint32_t txsize, off; ++ ++ txsize = sgval->wSize; ++ off = sgval->bOffset; ++ ++// CFI_INFO("%s: %s TXSIZE=0x%08x; OFFSET=0x%08x\n", ++// __func__, cfiep->ep->ep.name, txsize, off); ++ ++ for (i = 0; i < sgval->bCount; i++) { ++ desc->status.b.bs = BS_HOST_BUSY; ++ desc->buf = buff_addr; ++ desc->status.b.l = 0; ++ desc->status.b.ioc = 0; ++ desc->status.b.sp = 0; ++ desc->status.b.bytes = txsize; ++ desc->status.b.bs = BS_HOST_READY; ++ ++ /* Set the next address of the buffer */ ++ buff_addr += txsize + off; ++ desc_last = desc; ++ desc++; ++ } ++ ++ /* Set the last, ioc and sp bits on the Last DMA Descriptor */ ++ desc_last->status.b.l = 1; ++ desc_last->status.b.ioc = 1; ++ desc_last->status.b.sp = ep->dwc_ep.sent_zlp; ++ /* Save the last DMA descriptor pointer */ ++ cfiep->dma_desc_last = desc_last; ++ cfiep->desc_count = sgval->bCount; ++} ++ ++/** ++ * This function builds the DMA descriptors for the Concatenation buffer mode. ++ */ ++static void cfi_build_concat_descs(struct cfiobject *cfi, cfi_ep_t * cfiep, ++ dwc_otg_pcd_request_t * req) ++{ ++ struct dwc_otg_pcd_ep *ep = cfiep->ep; ++ ddma_concat_buffer_setup_t *concatval = cfiep->bm_concat; ++ struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs; ++ struct dwc_otg_dma_desc *desc_last = cfiep->ep->dwc_ep.descs; ++ dma_addr_t buff_addr = req->dma; ++ int i; ++ uint16_t *txsize; ++ ++ txsize = concatval->wTxBytes; ++ ++ for (i = 0; i < concatval->hdr.bDescCount; i++) { ++ desc->buf = buff_addr; ++ desc->status.b.bs = BS_HOST_BUSY; ++ desc->status.b.l = 0; ++ desc->status.b.ioc = 0; ++ desc->status.b.sp = 0; ++ desc->status.b.bytes = *txsize; ++ desc->status.b.bs = BS_HOST_READY; ++ ++ txsize++; ++ /* Set the next address of the buffer */ ++ buff_addr += UGETW(ep->desc->wMaxPacketSize); ++ desc_last = desc; ++ desc++; ++ } ++ ++ /* Set the last, ioc and sp bits on the Last DMA Descriptor */ ++ desc_last->status.b.l = 1; ++ desc_last->status.b.ioc = 1; ++ desc_last->status.b.sp = ep->dwc_ep.sent_zlp; ++ cfiep->dma_desc_last = desc_last; ++ cfiep->desc_count = concatval->hdr.bDescCount; ++} ++ ++/** ++ * This function builds the DMA descriptors for the Circular buffer mode ++ */ ++static void cfi_build_circ_descs(struct cfiobject *cfi, cfi_ep_t * cfiep, ++ dwc_otg_pcd_request_t * req) ++{ ++ /* @todo: MAS - add implementation when this feature needs to be tested */ ++} ++ ++/** ++ * This function builds the DMA descriptors for the Alignment buffer mode ++ */ ++static void cfi_build_align_descs(struct cfiobject *cfi, cfi_ep_t * cfiep, ++ dwc_otg_pcd_request_t * req) ++{ ++ struct dwc_otg_pcd_ep *ep = cfiep->ep; ++ ddma_align_buffer_setup_t *alignval = cfiep->bm_align; ++ struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs; ++ dma_addr_t buff_addr = req->dma; ++ ++ desc->status.b.bs = BS_HOST_BUSY; ++ desc->status.b.l = 1; ++ desc->status.b.ioc = 1; ++ desc->status.b.sp = ep->dwc_ep.sent_zlp; ++ desc->status.b.bytes = req->length; ++ /* Adjust the buffer alignment */ ++ desc->buf = (buff_addr + alignval->bAlign); ++ desc->status.b.bs = BS_HOST_READY; ++ cfiep->dma_desc_last = desc; ++ cfiep->desc_count = 1; ++} ++ ++/** ++ * This function builds the DMA descriptors chain for different modes of the ++ * buffer setup of an endpoint. ++ */ ++static void cfi_build_descriptors(struct cfiobject *cfi, ++ struct dwc_otg_pcd *pcd, ++ struct dwc_otg_pcd_ep *ep, ++ dwc_otg_pcd_request_t * req) ++{ ++ cfi_ep_t *cfiep; ++ ++ /* Get the cfiep by the dwc_otg_pcd_ep */ ++ cfiep = get_cfi_ep_by_pcd_ep(cfi, ep); ++ if (NULL == cfiep) { ++ CFI_INFO("%s: Unable to find a matching active endpoint\n", ++ __func__); ++ return; ++ } ++ ++ cfiep->xfer_len = req->length; ++ ++ /* Iterate through all the DMA descriptors */ ++ switch (cfiep->ep->dwc_ep.buff_mode) { ++ case BM_SG: ++ cfi_build_sg_descs(cfi, cfiep, req); ++ break; ++ ++ case BM_CONCAT: ++ cfi_build_concat_descs(cfi, cfiep, req); ++ break; ++ ++ case BM_CIRCULAR: ++ cfi_build_circ_descs(cfi, cfiep, req); ++ break; ++ ++ case BM_ALIGN: ++ cfi_build_align_descs(cfi, cfiep, req); ++ break; ++ ++ default: ++ break; ++ } ++} ++ ++/** ++ * Allocate DMA buffer for different Buffer modes. ++ */ ++static void *cfi_ep_alloc_buf(struct cfiobject *cfi, struct dwc_otg_pcd *pcd, ++ struct dwc_otg_pcd_ep *ep, dma_addr_t * dma, ++ unsigned size, gfp_t flags) ++{ ++ return DWC_DMA_ALLOC(size, dma); ++} ++ ++/** ++ * This function initializes the CFI object. ++ */ ++int init_cfi(cfiobject_t * cfiobj) ++{ ++ CFI_INFO("%s\n", __func__); ++ ++ /* Allocate a buffer for IN XFERs */ ++ cfiobj->buf_in.buf = ++ DWC_DMA_ALLOC(CFI_IN_BUF_LEN, &cfiobj->buf_in.addr); ++ if (NULL == cfiobj->buf_in.buf) { ++ CFI_INFO("Unable to allocate buffer for INs\n"); ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ /* Allocate a buffer for OUT XFERs */ ++ cfiobj->buf_out.buf = ++ DWC_DMA_ALLOC(CFI_OUT_BUF_LEN, &cfiobj->buf_out.addr); ++ if (NULL == cfiobj->buf_out.buf) { ++ CFI_INFO("Unable to allocate buffer for OUT\n"); ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ /* Initialize the callback function pointers */ ++ cfiobj->ops.release = cfi_release; ++ cfiobj->ops.ep_enable = cfi_ep_enable; ++ cfiobj->ops.ctrl_write_complete = cfi_ctrl_write_complete; ++ cfiobj->ops.build_descriptors = cfi_build_descriptors; ++ cfiobj->ops.ep_alloc_buf = cfi_ep_alloc_buf; ++ ++ /* Initialize the list of active endpoints in the CFI object */ ++ DWC_LIST_INIT(&cfiobj->active_eps); ++ ++ return 0; ++} ++ ++/** ++ * This function reads the required feature's current value into the buffer ++ * ++ * @retval: Returns negative as error, or the data length of the feature ++ */ ++static int cfi_get_feature_value(uint8_t * buf, uint16_t buflen, ++ struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *ctrl_req) ++{ ++ int retval = -DWC_E_NOT_SUPPORTED; ++ struct dwc_otg_core_if *coreif = GET_CORE_IF(pcd); ++ uint16_t dfifo, rxfifo, txfifo; ++ ++ switch (ctrl_req->wIndex) { ++ /* Whether the DDMA is enabled or not */ ++ case FT_ID_DMA_MODE: ++ *buf = (coreif->dma_enable && coreif->dma_desc_enable) ? 1 : 0; ++ retval = 1; ++ break; ++ ++ case FT_ID_DMA_BUFFER_SETUP: ++ retval = cfi_ep_get_sg_val(buf, pcd, ctrl_req); ++ break; ++ ++ case FT_ID_DMA_BUFF_ALIGN: ++ retval = cfi_ep_get_align_val(buf, pcd, ctrl_req); ++ break; ++ ++ case FT_ID_DMA_CONCAT_SETUP: ++ retval = cfi_ep_get_concat_val(buf, pcd, ctrl_req); ++ break; ++ ++ case FT_ID_DMA_CIRCULAR: ++ CFI_INFO("GetFeature value (FT_ID_DMA_CIRCULAR)\n"); ++ break; ++ ++ case FT_ID_THRESHOLD_SETUP: ++ CFI_INFO("GetFeature value (FT_ID_THRESHOLD_SETUP)\n"); ++ break; ++ ++ case FT_ID_DFIFO_DEPTH: ++ dfifo = get_dfifo_size(coreif); ++ *((uint16_t *) buf) = dfifo; ++ retval = sizeof(uint16_t); ++ break; ++ ++ case FT_ID_TX_FIFO_DEPTH: ++ retval = get_txfifo_size(pcd, ctrl_req->wValue); ++ if (retval >= 0) { ++ txfifo = retval; ++ *((uint16_t *) buf) = txfifo; ++ retval = sizeof(uint16_t); ++ } ++ break; ++ ++ case FT_ID_RX_FIFO_DEPTH: ++ retval = get_rxfifo_size(coreif, ctrl_req->wValue); ++ if (retval >= 0) { ++ rxfifo = retval; ++ *((uint16_t *) buf) = rxfifo; ++ retval = sizeof(uint16_t); ++ } ++ break; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function resets the SG for the specified EP to its default value ++ */ ++static int cfi_reset_sg_val(cfi_ep_t * cfiep) ++{ ++ dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t)); ++ return 0; ++} ++ ++/** ++ * This function resets the Alignment for the specified EP to its default value ++ */ ++static int cfi_reset_align_val(cfi_ep_t * cfiep) ++{ ++ dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t)); ++ return 0; ++} ++ ++/** ++ * This function resets the Concatenation for the specified EP to its default value ++ * This function will also set the value of the wTxBytes field to NULL after ++ * freeing the memory previously allocated for this field. ++ */ ++static int cfi_reset_concat_val(cfi_ep_t * cfiep) ++{ ++ /* First we need to free the wTxBytes field */ ++ if (cfiep->bm_concat->wTxBytes) { ++ DWC_FREE(cfiep->bm_concat->wTxBytes); ++ cfiep->bm_concat->wTxBytes = NULL; ++ } ++ ++ dwc_memset(cfiep->bm_concat, 0, sizeof(ddma_concat_buffer_setup_t)); ++ return 0; ++} ++ ++/** ++ * This function resets all the buffer setups of the specified endpoint ++ */ ++static int cfi_ep_reset_all_setup_vals(cfi_ep_t * cfiep) ++{ ++ cfi_reset_sg_val(cfiep); ++ cfi_reset_align_val(cfiep); ++ cfi_reset_concat_val(cfiep); ++ return 0; ++} ++ ++static int cfi_handle_reset_fifo_val(struct dwc_otg_pcd *pcd, uint8_t ep_addr, ++ uint8_t rx_rst, uint8_t tx_rst) ++{ ++ int retval = -DWC_E_INVALID; ++ uint16_t tx_siz[15]; ++ uint16_t rx_siz = 0; ++ dwc_otg_pcd_ep_t *ep = NULL; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params; ++ ++ if (rx_rst) { ++ rx_siz = params->dev_rx_fifo_size; ++ params->dev_rx_fifo_size = GET_CORE_IF(pcd)->init_rxfsiz; ++ } ++ ++ if (tx_rst) { ++ if (ep_addr == 0) { ++ int i; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ tx_siz[i] = ++ core_if->core_params->dev_tx_fifo_size[i]; ++ core_if->core_params->dev_tx_fifo_size[i] = ++ core_if->init_txfsiz[i]; ++ } ++ } else { ++ ++ ep = get_ep_by_addr(pcd, ep_addr); ++ ++ if (NULL == ep) { ++ CFI_INFO ++ ("%s: Unable to get the endpoint addr=0x%02x\n", ++ __func__, ep_addr); ++ return -DWC_E_INVALID; ++ } ++ ++ tx_siz[0] = ++ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - ++ 1]; ++ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = ++ GET_CORE_IF(pcd)->init_txfsiz[ep-> ++ dwc_ep.tx_fifo_num - ++ 1]; ++ } ++ } ++ ++ if (resize_fifos(GET_CORE_IF(pcd))) { ++ retval = 0; ++ } else { ++ CFI_INFO ++ ("%s: Error resetting the feature Reset All(FIFO size)\n", ++ __func__); ++ if (rx_rst) { ++ params->dev_rx_fifo_size = rx_siz; ++ } ++ ++ if (tx_rst) { ++ if (ep_addr == 0) { ++ int i; ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; ++ i++) { ++ core_if-> ++ core_params->dev_tx_fifo_size[i] = ++ tx_siz[i]; ++ } ++ } else { ++ params->dev_tx_fifo_size[ep-> ++ dwc_ep.tx_fifo_num - ++ 1] = tx_siz[0]; ++ } ++ } ++ retval = -DWC_E_INVALID; ++ } ++ return retval; ++} ++ ++static int cfi_handle_reset_all(struct dwc_otg_pcd *pcd, uint8_t addr) ++{ ++ int retval = 0; ++ cfi_ep_t *cfiep; ++ cfiobject_t *cfi = pcd->cfi; ++ dwc_list_link_t *tmp; ++ ++ retval = cfi_handle_reset_fifo_val(pcd, addr, 1, 1); ++ if (retval < 0) { ++ return retval; ++ } ++ ++ /* If the EP address is known then reset the features for only that EP */ ++ if (addr) { ++ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == cfiep) { ++ CFI_INFO("%s: Error getting the EP address 0x%02x\n", ++ __func__, addr); ++ return -DWC_E_INVALID; ++ } ++ retval = cfi_ep_reset_all_setup_vals(cfiep); ++ cfiep->ep->dwc_ep.buff_mode = BM_STANDARD; ++ } ++ /* Otherwise (wValue == 0), reset all features of all EP's */ ++ else { ++ /* Traverse all the active EP's and reset the feature(s) value(s) */ ++ //list_for_each_entry(cfiep, &cfi->active_eps, lh) { ++ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { ++ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ retval = cfi_ep_reset_all_setup_vals(cfiep); ++ cfiep->ep->dwc_ep.buff_mode = BM_STANDARD; ++ if (retval < 0) { ++ CFI_INFO ++ ("%s: Error resetting the feature Reset All\n", ++ __func__); ++ return retval; ++ } ++ } ++ } ++ return retval; ++} ++ ++static int cfi_handle_reset_dma_buff_setup(struct dwc_otg_pcd *pcd, ++ uint8_t addr) ++{ ++ int retval = 0; ++ cfi_ep_t *cfiep; ++ cfiobject_t *cfi = pcd->cfi; ++ dwc_list_link_t *tmp; ++ ++ /* If the EP address is known then reset the features for only that EP */ ++ if (addr) { ++ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == cfiep) { ++ CFI_INFO("%s: Error getting the EP address 0x%02x\n", ++ __func__, addr); ++ return -DWC_E_INVALID; ++ } ++ retval = cfi_reset_sg_val(cfiep); ++ } ++ /* Otherwise (wValue == 0), reset all features of all EP's */ ++ else { ++ /* Traverse all the active EP's and reset the feature(s) value(s) */ ++ //list_for_each_entry(cfiep, &cfi->active_eps, lh) { ++ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { ++ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ retval = cfi_reset_sg_val(cfiep); ++ if (retval < 0) { ++ CFI_INFO ++ ("%s: Error resetting the feature Buffer Setup\n", ++ __func__); ++ return retval; ++ } ++ } ++ } ++ return retval; ++} ++ ++static int cfi_handle_reset_concat_val(struct dwc_otg_pcd *pcd, uint8_t addr) ++{ ++ int retval = 0; ++ cfi_ep_t *cfiep; ++ cfiobject_t *cfi = pcd->cfi; ++ dwc_list_link_t *tmp; ++ ++ /* If the EP address is known then reset the features for only that EP */ ++ if (addr) { ++ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == cfiep) { ++ CFI_INFO("%s: Error getting the EP address 0x%02x\n", ++ __func__, addr); ++ return -DWC_E_INVALID; ++ } ++ retval = cfi_reset_concat_val(cfiep); ++ } ++ /* Otherwise (wValue == 0), reset all features of all EP's */ ++ else { ++ /* Traverse all the active EP's and reset the feature(s) value(s) */ ++ //list_for_each_entry(cfiep, &cfi->active_eps, lh) { ++ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { ++ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ retval = cfi_reset_concat_val(cfiep); ++ if (retval < 0) { ++ CFI_INFO ++ ("%s: Error resetting the feature Concatenation Value\n", ++ __func__); ++ return retval; ++ } ++ } ++ } ++ return retval; ++} ++ ++static int cfi_handle_reset_align_val(struct dwc_otg_pcd *pcd, uint8_t addr) ++{ ++ int retval = 0; ++ cfi_ep_t *cfiep; ++ cfiobject_t *cfi = pcd->cfi; ++ dwc_list_link_t *tmp; ++ ++ /* If the EP address is known then reset the features for only that EP */ ++ if (addr) { ++ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == cfiep) { ++ CFI_INFO("%s: Error getting the EP address 0x%02x\n", ++ __func__, addr); ++ return -DWC_E_INVALID; ++ } ++ retval = cfi_reset_align_val(cfiep); ++ } ++ /* Otherwise (wValue == 0), reset all features of all EP's */ ++ else { ++ /* Traverse all the active EP's and reset the feature(s) value(s) */ ++ //list_for_each_entry(cfiep, &cfi->active_eps, lh) { ++ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { ++ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ retval = cfi_reset_align_val(cfiep); ++ if (retval < 0) { ++ CFI_INFO ++ ("%s: Error resetting the feature Aliignment Value\n", ++ __func__); ++ return retval; ++ } ++ } ++ } ++ return retval; ++ ++} ++ ++static int cfi_preproc_reset(struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req) ++{ ++ int retval = 0; ++ ++ switch (req->wIndex) { ++ case 0: ++ /* Reset all features */ ++ retval = cfi_handle_reset_all(pcd, req->wValue & 0xff); ++ break; ++ ++ case FT_ID_DMA_BUFFER_SETUP: ++ /* Reset the SG buffer setup */ ++ retval = ++ cfi_handle_reset_dma_buff_setup(pcd, req->wValue & 0xff); ++ break; ++ ++ case FT_ID_DMA_CONCAT_SETUP: ++ /* Reset the Concatenation buffer setup */ ++ retval = cfi_handle_reset_concat_val(pcd, req->wValue & 0xff); ++ break; ++ ++ case FT_ID_DMA_BUFF_ALIGN: ++ /* Reset the Alignment buffer setup */ ++ retval = cfi_handle_reset_align_val(pcd, req->wValue & 0xff); ++ break; ++ ++ case FT_ID_TX_FIFO_DEPTH: ++ retval = ++ cfi_handle_reset_fifo_val(pcd, req->wValue & 0xff, 0, 1); ++ pcd->cfi->need_gadget_att = 0; ++ break; ++ ++ case FT_ID_RX_FIFO_DEPTH: ++ retval = cfi_handle_reset_fifo_val(pcd, 0, 1, 0); ++ pcd->cfi->need_gadget_att = 0; ++ break; ++ default: ++ break; ++ } ++ return retval; ++} ++ ++/** ++ * This function sets a new value for the SG buffer setup. ++ */ ++static int cfi_ep_set_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd) ++{ ++ uint8_t inaddr, outaddr; ++ cfi_ep_t *epin, *epout; ++ ddma_sg_buffer_setup_t *psgval; ++ uint32_t desccount, size; ++ ++ CFI_INFO("%s\n", __func__); ++ ++ psgval = (ddma_sg_buffer_setup_t *) buf; ++ desccount = (uint32_t) psgval->bCount; ++ size = (uint32_t) psgval->wSize; ++ ++ /* Check the DMA descriptor count */ ++ if ((desccount > MAX_DMA_DESCS_PER_EP) || (desccount == 0)) { ++ CFI_INFO ++ ("%s: The count of DMA Descriptors should be between 1 and %d\n", ++ __func__, MAX_DMA_DESCS_PER_EP); ++ return -DWC_E_INVALID; ++ } ++ ++ /* Check the DMA descriptor count */ ++ ++ if (size == 0) { ++ ++ CFI_INFO("%s: The transfer size should be at least 1 byte\n", ++ __func__); ++ ++ return -DWC_E_INVALID; ++ ++ } ++ ++ inaddr = psgval->bInEndpointAddress; ++ outaddr = psgval->bOutEndpointAddress; ++ ++ epin = get_cfi_ep_by_addr(pcd->cfi, inaddr); ++ epout = get_cfi_ep_by_addr(pcd->cfi, outaddr); ++ ++ if (NULL == epin || NULL == epout) { ++ CFI_INFO ++ ("%s: Unable to get the endpoints inaddr=0x%02x outaddr=0x%02x\n", ++ __func__, inaddr, outaddr); ++ return -DWC_E_INVALID; ++ } ++ ++ epin->ep->dwc_ep.buff_mode = BM_SG; ++ dwc_memcpy(epin->bm_sg, psgval, sizeof(ddma_sg_buffer_setup_t)); ++ ++ epout->ep->dwc_ep.buff_mode = BM_SG; ++ dwc_memcpy(epout->bm_sg, psgval, sizeof(ddma_sg_buffer_setup_t)); ++ ++ return 0; ++} ++ ++/** ++ * This function sets a new value for the buffer Alignment setup. ++ */ ++static int cfi_ep_set_alignment_val(uint8_t * buf, struct dwc_otg_pcd *pcd) ++{ ++ cfi_ep_t *ep; ++ uint8_t addr; ++ ddma_align_buffer_setup_t *palignval; ++ ++ palignval = (ddma_align_buffer_setup_t *) buf; ++ addr = palignval->bEndpointAddress; ++ ++ ep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n", ++ __func__, addr); ++ return -DWC_E_INVALID; ++ } ++ ++ ep->ep->dwc_ep.buff_mode = BM_ALIGN; ++ dwc_memcpy(ep->bm_align, palignval, sizeof(ddma_align_buffer_setup_t)); ++ ++ return 0; ++} ++ ++/** ++ * This function sets a new value for the Concatenation buffer setup. ++ */ ++static int cfi_ep_set_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd) ++{ ++ uint8_t addr; ++ cfi_ep_t *ep; ++ struct _ddma_concat_buffer_setup_hdr *pConcatValHdr; ++ uint16_t *pVals; ++ uint32_t desccount; ++ int i; ++ uint16_t mps; ++ ++ pConcatValHdr = (struct _ddma_concat_buffer_setup_hdr *)buf; ++ desccount = (uint32_t) pConcatValHdr->bDescCount; ++ pVals = (uint16_t *) (buf + BS_CONCAT_VAL_HDR_LEN); ++ ++ /* Check the DMA descriptor count */ ++ if (desccount > MAX_DMA_DESCS_PER_EP) { ++ CFI_INFO("%s: Maximum DMA Descriptor count should be %d\n", ++ __func__, MAX_DMA_DESCS_PER_EP); ++ return -DWC_E_INVALID; ++ } ++ ++ addr = pConcatValHdr->bEndpointAddress; ++ ep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n", ++ __func__, addr); ++ return -DWC_E_INVALID; ++ } ++ ++ mps = UGETW(ep->ep->desc->wMaxPacketSize); ++ ++#if 0 ++ for (i = 0; i < desccount; i++) { ++ CFI_INFO("%s: wTxSize[%d]=0x%04x\n", __func__, i, pVals[i]); ++ } ++ CFI_INFO("%s: epname=%s; mps=%d\n", __func__, ep->ep->ep.name, mps); ++#endif ++ ++ /* Check the wTxSizes to be less than or equal to the mps */ ++ for (i = 0; i < desccount; i++) { ++ if (pVals[i] > mps) { ++ CFI_INFO ++ ("%s: ERROR - the wTxSize[%d] should be <= MPS (wTxSize=%d)\n", ++ __func__, i, pVals[i]); ++ return -DWC_E_INVALID; ++ } ++ } ++ ++ ep->ep->dwc_ep.buff_mode = BM_CONCAT; ++ dwc_memcpy(ep->bm_concat, pConcatValHdr, BS_CONCAT_VAL_HDR_LEN); ++ ++ /* Free the previously allocated storage for the wTxBytes */ ++ if (ep->bm_concat->wTxBytes) { ++ DWC_FREE(ep->bm_concat->wTxBytes); ++ } ++ ++ /* Allocate a new storage for the wTxBytes field */ ++ ep->bm_concat->wTxBytes = ++ DWC_ALLOC(sizeof(uint16_t) * pConcatValHdr->bDescCount); ++ if (NULL == ep->bm_concat->wTxBytes) { ++ CFI_INFO("%s: Unable to allocate memory\n", __func__); ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ /* Copy the new values into the wTxBytes filed */ ++ dwc_memcpy(ep->bm_concat->wTxBytes, buf + BS_CONCAT_VAL_HDR_LEN, ++ sizeof(uint16_t) * pConcatValHdr->bDescCount); ++ ++ return 0; ++} ++ ++/** ++ * This function calculates the total of all FIFO sizes ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ * @return The total of data FIFO sizes. ++ * ++ */ ++static uint16_t get_dfifo_size(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_params_t *params = core_if->core_params; ++ uint16_t dfifo_total = 0; ++ int i; ++ ++ /* The shared RxFIFO size */ ++ dfifo_total = ++ params->dev_rx_fifo_size + params->dev_nperio_tx_fifo_size; ++ ++ /* Add up each TxFIFO size to the total */ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ dfifo_total += params->dev_tx_fifo_size[i]; ++ } ++ ++ return dfifo_total; ++} ++ ++/** ++ * This function returns Rx FIFO size ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ * @return The total of data FIFO sizes. ++ * ++ */ ++static int32_t get_rxfifo_size(dwc_otg_core_if_t * core_if, uint16_t wValue) ++{ ++ switch (wValue >> 8) { ++ case 0: ++ return (core_if->pwron_rxfsiz < ++ 32768) ? core_if->pwron_rxfsiz : 32768; ++ break; ++ case 1: ++ return core_if->core_params->dev_rx_fifo_size; ++ break; ++ default: ++ return -DWC_E_INVALID; ++ break; ++ } ++} ++ ++/** ++ * This function returns Tx FIFO size for IN EP ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ * @return The total of data FIFO sizes. ++ * ++ */ ++static int32_t get_txfifo_size(struct dwc_otg_pcd *pcd, uint16_t wValue) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ ++ ep = get_ep_by_addr(pcd, wValue & 0xff); ++ ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n", ++ __func__, wValue & 0xff); ++ return -DWC_E_INVALID; ++ } ++ ++ if (!ep->dwc_ep.is_in) { ++ CFI_INFO ++ ("%s: No Tx FIFO assingned to the Out endpoint addr=0x%02x\n", ++ __func__, wValue & 0xff); ++ return -DWC_E_INVALID; ++ } ++ ++ switch (wValue >> 8) { ++ case 0: ++ return (GET_CORE_IF(pcd)->pwron_txfsiz ++ [ep->dwc_ep.tx_fifo_num - 1] < ++ 768) ? GET_CORE_IF(pcd)->pwron_txfsiz[ep-> ++ dwc_ep.tx_fifo_num ++ - 1] : 32768; ++ break; ++ case 1: ++ return GET_CORE_IF(pcd)->core_params-> ++ dev_tx_fifo_size[ep->dwc_ep.num - 1]; ++ break; ++ default: ++ return -DWC_E_INVALID; ++ break; ++ } ++} ++ ++/** ++ * This function checks if the submitted combination of ++ * device mode FIFO sizes is possible or not. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ * @return 1 if possible, 0 otherwise. ++ * ++ */ ++static uint8_t check_fifo_sizes(dwc_otg_core_if_t * core_if) ++{ ++ uint16_t dfifo_actual = 0; ++ dwc_otg_core_params_t *params = core_if->core_params; ++ uint16_t start_addr = 0; ++ int i; ++ ++ dfifo_actual = ++ params->dev_rx_fifo_size + params->dev_nperio_tx_fifo_size; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ dfifo_actual += params->dev_tx_fifo_size[i]; ++ } ++ ++ if (dfifo_actual > core_if->total_fifo_size) { ++ return 0; ++ } ++ ++ if (params->dev_rx_fifo_size > 32768 || params->dev_rx_fifo_size < 16) ++ return 0; ++ ++ if (params->dev_nperio_tx_fifo_size > 32768 ++ || params->dev_nperio_tx_fifo_size < 16) ++ return 0; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ ++ if (params->dev_tx_fifo_size[i] > 768 ++ || params->dev_tx_fifo_size[i] < 4) ++ return 0; ++ } ++ ++ if (params->dev_rx_fifo_size > core_if->pwron_rxfsiz) ++ return 0; ++ start_addr = params->dev_rx_fifo_size; ++ ++ if (params->dev_nperio_tx_fifo_size > core_if->pwron_gnptxfsiz) ++ return 0; ++ start_addr += params->dev_nperio_tx_fifo_size; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ ++ if (params->dev_tx_fifo_size[i] > core_if->pwron_txfsiz[i]) ++ return 0; ++ start_addr += params->dev_tx_fifo_size[i]; ++ } ++ ++ return 1; ++} ++ ++/** ++ * This function resizes Device mode FIFOs ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ * @return 1 if successful, 0 otherwise ++ * ++ */ ++static uint8_t resize_fifos(dwc_otg_core_if_t * core_if) ++{ ++ int i = 0; ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ dwc_otg_core_params_t *params = core_if->core_params; ++ uint32_t rx_fifo_size; ++ fifosize_data_t nptxfifosize; ++ fifosize_data_t txfifosize[15]; ++ ++ uint32_t rx_fsz_bak; ++ uint32_t nptxfsz_bak; ++ uint32_t txfsz_bak[15]; ++ ++ uint16_t start_address; ++ uint8_t retval = 1; ++ ++ if (!check_fifo_sizes(core_if)) { ++ return 0; ++ } ++ ++ /* Configure data FIFO sizes */ ++ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { ++ rx_fsz_bak = DWC_READ_REG32(&global_regs->grxfsiz); ++ rx_fifo_size = params->dev_rx_fifo_size; ++ DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fifo_size); ++ ++ /* ++ * Tx FIFOs These FIFOs are numbered from 1 to 15. ++ * Indexes of the FIFO size module parameters in the ++ * dev_tx_fifo_size array and the FIFO size registers in ++ * the dtxfsiz array run from 0 to 14. ++ */ ++ ++ /* Non-periodic Tx FIFO */ ++ nptxfsz_bak = DWC_READ_REG32(&global_regs->gnptxfsiz); ++ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; ++ start_address = params->dev_rx_fifo_size; ++ nptxfifosize.b.startaddr = start_address; ++ ++ DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfifosize.d32); ++ ++ start_address += nptxfifosize.b.depth; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ txfsz_bak[i] = DWC_READ_REG32(&global_regs->dtxfsiz[i]); ++ ++ txfifosize[i].b.depth = params->dev_tx_fifo_size[i]; ++ txfifosize[i].b.startaddr = start_address; ++ DWC_WRITE_REG32(&global_regs->dtxfsiz[i], ++ txfifosize[i].d32); ++ ++ start_address += txfifosize[i].b.depth; ++ } ++ ++ /** Check if register values are set correctly */ ++ if (rx_fifo_size != DWC_READ_REG32(&global_regs->grxfsiz)) { ++ retval = 0; ++ } ++ ++ if (nptxfifosize.d32 != DWC_READ_REG32(&global_regs->gnptxfsiz)) { ++ retval = 0; ++ } ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ if (txfifosize[i].d32 != ++ DWC_READ_REG32(&global_regs->dtxfsiz[i])) { ++ retval = 0; ++ } ++ } ++ ++ /** If register values are not set correctly, reset old values */ ++ if (retval == 0) { ++ DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fsz_bak); ++ ++ /* Non-periodic Tx FIFO */ ++ DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfsz_bak); ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ DWC_WRITE_REG32(&global_regs->dtxfsiz[i], ++ txfsz_bak[i]); ++ } ++ } ++ } else { ++ return 0; ++ } ++ ++ /* Flush the FIFOs */ ++ dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */ ++ dwc_otg_flush_rx_fifo(core_if); ++ ++ return retval; ++} ++ ++/** ++ * This function sets a new value for the buffer Alignment setup. ++ */ ++static int cfi_ep_set_tx_fifo_val(uint8_t * buf, dwc_otg_pcd_t * pcd) ++{ ++ int retval; ++ uint32_t fsiz; ++ uint16_t size; ++ uint16_t ep_addr; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params; ++ tx_fifo_size_setup_t *ptxfifoval; ++ ++ ptxfifoval = (tx_fifo_size_setup_t *) buf; ++ ep_addr = ptxfifoval->bEndpointAddress; ++ size = ptxfifoval->wDepth; ++ ++ ep = get_ep_by_addr(pcd, ep_addr); ++ ++ CFI_INFO ++ ("%s: Set Tx FIFO size: endpoint addr=0x%02x, depth=%d, FIFO Num=%d\n", ++ __func__, ep_addr, size, ep->dwc_ep.tx_fifo_num); ++ ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n", ++ __func__, ep_addr); ++ return -DWC_E_INVALID; ++ } ++ ++ fsiz = params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1]; ++ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = size; ++ ++ if (resize_fifos(GET_CORE_IF(pcd))) { ++ retval = 0; ++ } else { ++ CFI_INFO ++ ("%s: Error setting the feature Tx FIFO Size for EP%d\n", ++ __func__, ep_addr); ++ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = fsiz; ++ retval = -DWC_E_INVALID; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function sets a new value for the buffer Alignment setup. ++ */ ++static int cfi_set_rx_fifo_val(uint8_t * buf, dwc_otg_pcd_t * pcd) ++{ ++ int retval; ++ uint32_t fsiz; ++ uint16_t size; ++ dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params; ++ rx_fifo_size_setup_t *prxfifoval; ++ ++ prxfifoval = (rx_fifo_size_setup_t *) buf; ++ size = prxfifoval->wDepth; ++ ++ fsiz = params->dev_rx_fifo_size; ++ params->dev_rx_fifo_size = size; ++ ++ if (resize_fifos(GET_CORE_IF(pcd))) { ++ retval = 0; ++ } else { ++ CFI_INFO("%s: Error setting the feature Rx FIFO Size\n", ++ __func__); ++ params->dev_rx_fifo_size = fsiz; ++ retval = -DWC_E_INVALID; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function reads the SG of an EP's buffer setup into the buffer buf ++ */ ++static int cfi_ep_get_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req) ++{ ++ int retval = -DWC_E_INVALID; ++ uint8_t addr; ++ cfi_ep_t *ep; ++ ++ /* The Low Byte of the wValue contains a non-zero address of the endpoint */ ++ addr = req->wValue & 0xFF; ++ if (addr == 0) /* The address should be non-zero */ ++ return retval; ++ ++ ep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n", ++ __func__, addr); ++ return retval; ++ } ++ ++ dwc_memcpy(buf, ep->bm_sg, BS_SG_VAL_DESC_LEN); ++ retval = BS_SG_VAL_DESC_LEN; ++ return retval; ++} ++ ++/** ++ * This function reads the Concatenation value of an EP's buffer mode into ++ * the buffer buf ++ */ ++static int cfi_ep_get_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req) ++{ ++ int retval = -DWC_E_INVALID; ++ uint8_t addr; ++ cfi_ep_t *ep; ++ uint8_t desc_count; ++ ++ /* The Low Byte of the wValue contains a non-zero address of the endpoint */ ++ addr = req->wValue & 0xFF; ++ if (addr == 0) /* The address should be non-zero */ ++ return retval; ++ ++ ep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n", ++ __func__, addr); ++ return retval; ++ } ++ ++ /* Copy the header to the buffer */ ++ dwc_memcpy(buf, ep->bm_concat, BS_CONCAT_VAL_HDR_LEN); ++ /* Advance the buffer pointer by the header size */ ++ buf += BS_CONCAT_VAL_HDR_LEN; ++ ++ desc_count = ep->bm_concat->hdr.bDescCount; ++ /* Copy alll the wTxBytes to the buffer */ ++ dwc_memcpy(buf, ep->bm_concat->wTxBytes, sizeof(uid16_t) * desc_count); ++ ++ retval = BS_CONCAT_VAL_HDR_LEN + sizeof(uid16_t) * desc_count; ++ return retval; ++} ++ ++/** ++ * This function reads the buffer Alignment value of an EP's buffer mode into ++ * the buffer buf ++ * ++ * @return The total number of bytes copied to the buffer or negative error code. ++ */ ++static int cfi_ep_get_align_val(uint8_t * buf, struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req) ++{ ++ int retval = -DWC_E_INVALID; ++ uint8_t addr; ++ cfi_ep_t *ep; ++ ++ /* The Low Byte of the wValue contains a non-zero address of the endpoint */ ++ addr = req->wValue & 0xFF; ++ if (addr == 0) /* The address should be non-zero */ ++ return retval; ++ ++ ep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n", ++ __func__, addr); ++ return retval; ++ } ++ ++ dwc_memcpy(buf, ep->bm_align, BS_ALIGN_VAL_HDR_LEN); ++ retval = BS_ALIGN_VAL_HDR_LEN; ++ ++ return retval; ++} ++ ++/** ++ * This function sets a new value for the specified feature ++ * ++ * @param pcd A pointer to the PCD object ++ * ++ * @return 0 if successful, negative error code otherwise to stall the DCE. ++ */ ++static int cfi_set_feature_value(struct dwc_otg_pcd *pcd) ++{ ++ int retval = -DWC_E_NOT_SUPPORTED; ++ uint16_t wIndex, wValue; ++ uint8_t bRequest; ++ struct dwc_otg_core_if *coreif; ++ cfiobject_t *cfi = pcd->cfi; ++ struct cfi_usb_ctrlrequest *ctrl_req; ++ uint8_t *buf; ++ ctrl_req = &cfi->ctrl_req; ++ ++ buf = pcd->cfi->ctrl_req.data; ++ ++ coreif = GET_CORE_IF(pcd); ++ bRequest = ctrl_req->bRequest; ++ wIndex = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wIndex); ++ wValue = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wValue); ++ ++ /* See which feature is to be modified */ ++ switch (wIndex) { ++ case FT_ID_DMA_BUFFER_SETUP: ++ /* Modify the feature */ ++ if ((retval = cfi_ep_set_sg_val(buf, pcd)) < 0) ++ return retval; ++ ++ /* And send this request to the gadget */ ++ cfi->need_gadget_att = 1; ++ break; ++ ++ case FT_ID_DMA_BUFF_ALIGN: ++ if ((retval = cfi_ep_set_alignment_val(buf, pcd)) < 0) ++ return retval; ++ cfi->need_gadget_att = 1; ++ break; ++ ++ case FT_ID_DMA_CONCAT_SETUP: ++ /* Modify the feature */ ++ if ((retval = cfi_ep_set_concat_val(buf, pcd)) < 0) ++ return retval; ++ cfi->need_gadget_att = 1; ++ break; ++ ++ case FT_ID_DMA_CIRCULAR: ++ CFI_INFO("FT_ID_DMA_CIRCULAR\n"); ++ break; ++ ++ case FT_ID_THRESHOLD_SETUP: ++ CFI_INFO("FT_ID_THRESHOLD_SETUP\n"); ++ break; ++ ++ case FT_ID_DFIFO_DEPTH: ++ CFI_INFO("FT_ID_DFIFO_DEPTH\n"); ++ break; ++ ++ case FT_ID_TX_FIFO_DEPTH: ++ CFI_INFO("FT_ID_TX_FIFO_DEPTH\n"); ++ if ((retval = cfi_ep_set_tx_fifo_val(buf, pcd)) < 0) ++ return retval; ++ cfi->need_gadget_att = 0; ++ break; ++ ++ case FT_ID_RX_FIFO_DEPTH: ++ CFI_INFO("FT_ID_RX_FIFO_DEPTH\n"); ++ if ((retval = cfi_set_rx_fifo_val(buf, pcd)) < 0) ++ return retval; ++ cfi->need_gadget_att = 0; ++ break; ++ } ++ ++ return retval; ++} ++ ++#endif //DWC_UTE_CFI +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_cfi.h +@@ -0,0 +1,320 @@ ++/* ========================================================================== ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#if !defined(__DWC_OTG_CFI_H__) ++#define __DWC_OTG_CFI_H__ ++ ++#include "dwc_otg_pcd.h" ++#include "dwc_cfi_common.h" ++ ++/** ++ * @file ++ * This file contains the CFI related OTG PCD specific common constants, ++ * interfaces(functions and macros) and data structures.The CFI Protocol is an ++ * optional interface for internal testing purposes that a DUT may implement to ++ * support testing of configurable features. ++ * ++ */ ++ ++struct dwc_otg_pcd; ++struct dwc_otg_pcd_ep; ++ ++/** OTG CFI Features (properties) ID constants */ ++/** This is a request for all Core Features */ ++#define FT_ID_DMA_MODE 0x0001 ++#define FT_ID_DMA_BUFFER_SETUP 0x0002 ++#define FT_ID_DMA_BUFF_ALIGN 0x0003 ++#define FT_ID_DMA_CONCAT_SETUP 0x0004 ++#define FT_ID_DMA_CIRCULAR 0x0005 ++#define FT_ID_THRESHOLD_SETUP 0x0006 ++#define FT_ID_DFIFO_DEPTH 0x0007 ++#define FT_ID_TX_FIFO_DEPTH 0x0008 ++#define FT_ID_RX_FIFO_DEPTH 0x0009 ++ ++/**********************************************************/ ++#define CFI_INFO_DEF ++ ++#ifdef CFI_INFO_DEF ++#define CFI_INFO(fmt...) DWC_PRINTF("CFI: " fmt); ++#else ++#define CFI_INFO(fmt...) ++#endif ++ ++#define min(x,y) ({ \ ++ x < y ? x : y; }) ++ ++#define max(x,y) ({ \ ++ x > y ? x : y; }) ++ ++/** ++ * Descriptor DMA SG Buffer setup structure (SG buffer). This structure is ++ * also used for setting up a buffer for Circular DDMA. ++ */ ++struct _ddma_sg_buffer_setup { ++#define BS_SG_VAL_DESC_LEN 6 ++ /* The OUT EP address */ ++ uint8_t bOutEndpointAddress; ++ /* The IN EP address */ ++ uint8_t bInEndpointAddress; ++ /* Number of bytes to put between transfer segments (must be DWORD boundaries) */ ++ uint8_t bOffset; ++ /* The number of transfer segments (a DMA descriptors per each segment) */ ++ uint8_t bCount; ++ /* Size (in byte) of each transfer segment */ ++ uint16_t wSize; ++} __attribute__ ((packed)); ++typedef struct _ddma_sg_buffer_setup ddma_sg_buffer_setup_t; ++ ++/** Descriptor DMA Concatenation Buffer setup structure */ ++struct _ddma_concat_buffer_setup_hdr { ++#define BS_CONCAT_VAL_HDR_LEN 4 ++ /* The endpoint for which the buffer is to be set up */ ++ uint8_t bEndpointAddress; ++ /* The count of descriptors to be used */ ++ uint8_t bDescCount; ++ /* The total size of the transfer */ ++ uint16_t wSize; ++} __attribute__ ((packed)); ++typedef struct _ddma_concat_buffer_setup_hdr ddma_concat_buffer_setup_hdr_t; ++ ++/** Descriptor DMA Concatenation Buffer setup structure */ ++struct _ddma_concat_buffer_setup { ++ /* The SG header */ ++ ddma_concat_buffer_setup_hdr_t hdr; ++ ++ /* The XFER sizes pointer (allocated dynamically) */ ++ uint16_t *wTxBytes; ++} __attribute__ ((packed)); ++typedef struct _ddma_concat_buffer_setup ddma_concat_buffer_setup_t; ++ ++/** Descriptor DMA Alignment Buffer setup structure */ ++struct _ddma_align_buffer_setup { ++#define BS_ALIGN_VAL_HDR_LEN 2 ++ uint8_t bEndpointAddress; ++ uint8_t bAlign; ++} __attribute__ ((packed)); ++typedef struct _ddma_align_buffer_setup ddma_align_buffer_setup_t; ++ ++/** Transmit FIFO Size setup structure */ ++struct _tx_fifo_size_setup { ++ uint8_t bEndpointAddress; ++ uint16_t wDepth; ++} __attribute__ ((packed)); ++typedef struct _tx_fifo_size_setup tx_fifo_size_setup_t; ++ ++/** Transmit FIFO Size setup structure */ ++struct _rx_fifo_size_setup { ++ uint16_t wDepth; ++} __attribute__ ((packed)); ++typedef struct _rx_fifo_size_setup rx_fifo_size_setup_t; ++ ++/** ++ * struct cfi_usb_ctrlrequest - the CFI implementation of the struct usb_ctrlrequest ++ * This structure encapsulates the standard usb_ctrlrequest and adds a pointer ++ * to the data returned in the data stage of a 3-stage Control Write requests. ++ */ ++struct cfi_usb_ctrlrequest { ++ uint8_t bRequestType; ++ uint8_t bRequest; ++ uint16_t wValue; ++ uint16_t wIndex; ++ uint16_t wLength; ++ uint8_t *data; ++} UPACKED; ++ ++/*---------------------------------------------------------------------------*/ ++ ++/** ++ * The CFI wrapper of the enabled and activated dwc_otg_pcd_ep structures. ++ * This structure is used to store the buffer setup data for any ++ * enabled endpoint in the PCD. ++ */ ++struct cfi_ep { ++ /* Entry for the list container */ ++ dwc_list_link_t lh; ++ /* Pointer to the active PCD endpoint structure */ ++ struct dwc_otg_pcd_ep *ep; ++ /* The last descriptor in the chain of DMA descriptors of the endpoint */ ++ struct dwc_otg_dma_desc *dma_desc_last; ++ /* The SG feature value */ ++ ddma_sg_buffer_setup_t *bm_sg; ++ /* The Circular feature value */ ++ ddma_sg_buffer_setup_t *bm_circ; ++ /* The Concatenation feature value */ ++ ddma_concat_buffer_setup_t *bm_concat; ++ /* The Alignment feature value */ ++ ddma_align_buffer_setup_t *bm_align; ++ /* XFER length */ ++ uint32_t xfer_len; ++ /* ++ * Count of DMA descriptors currently used. ++ * The total should not exceed the MAX_DMA_DESCS_PER_EP value ++ * defined in the dwc_otg_cil.h ++ */ ++ uint32_t desc_count; ++}; ++typedef struct cfi_ep cfi_ep_t; ++ ++typedef struct cfi_dma_buff { ++#define CFI_IN_BUF_LEN 1024 ++#define CFI_OUT_BUF_LEN 1024 ++ dma_addr_t addr; ++ uint8_t *buf; ++} cfi_dma_buff_t; ++ ++struct cfiobject; ++ ++/** ++ * This is the interface for the CFI operations. ++ * ++ * @param ep_enable Called when any endpoint is enabled and activated. ++ * @param release Called when the CFI object is released and it needs to correctly ++ * deallocate the dynamic memory ++ * @param ctrl_write_complete Called when the data stage of the request is complete ++ */ ++typedef struct cfi_ops { ++ int (*ep_enable) (struct cfiobject * cfi, struct dwc_otg_pcd * pcd, ++ struct dwc_otg_pcd_ep * ep); ++ void *(*ep_alloc_buf) (struct cfiobject * cfi, struct dwc_otg_pcd * pcd, ++ struct dwc_otg_pcd_ep * ep, dma_addr_t * dma, ++ unsigned size, gfp_t flags); ++ void (*release) (struct cfiobject * cfi); ++ int (*ctrl_write_complete) (struct cfiobject * cfi, ++ struct dwc_otg_pcd * pcd); ++ void (*build_descriptors) (struct cfiobject * cfi, ++ struct dwc_otg_pcd * pcd, ++ struct dwc_otg_pcd_ep * ep, ++ dwc_otg_pcd_request_t * req); ++} cfi_ops_t; ++ ++struct cfiobject { ++ cfi_ops_t ops; ++ struct dwc_otg_pcd *pcd; ++ struct usb_gadget *gadget; ++ ++ /* Buffers used to send/receive CFI-related request data */ ++ cfi_dma_buff_t buf_in; ++ cfi_dma_buff_t buf_out; ++ ++ /* CFI specific Control request wrapper */ ++ struct cfi_usb_ctrlrequest ctrl_req; ++ ++ /* The list of active EP's in the PCD of type cfi_ep_t */ ++ dwc_list_link_t active_eps; ++ ++ /* This flag shall control the propagation of a specific request ++ * to the gadget's processing routines. ++ * 0 - no gadget handling ++ * 1 - the gadget needs to know about this request (w/o completing a status ++ * phase - just return a 0 to the _setup callback) ++ */ ++ uint8_t need_gadget_att; ++ ++ /* Flag indicating whether the status IN phase needs to be ++ * completed by the PCD ++ */ ++ uint8_t need_status_in_complete; ++}; ++typedef struct cfiobject cfiobject_t; ++ ++#define DUMP_MSG ++ ++#if defined(DUMP_MSG) ++static inline void dump_msg(const u8 * buf, unsigned int length) ++{ ++ unsigned int start, num, i; ++ char line[52], *p; ++ ++ if (length >= 512) ++ return; ++ ++ start = 0; ++ while (length > 0) { ++ num = min(length, 16u); ++ p = line; ++ for (i = 0; i < num; ++i) { ++ if (i == 8) ++ *p++ = ' '; ++ DWC_SPRINTF(p, " %02x", buf[i]); ++ p += 3; ++ } ++ *p = 0; ++ DWC_DEBUG("%6x: %s\n", start, line); ++ buf += num; ++ start += num; ++ length -= num; ++ } ++} ++#else ++static inline void dump_msg(const u8 * buf, unsigned int length) ++{ ++} ++#endif ++ ++/** ++ * This function returns a pointer to cfi_ep_t object with the addr address. ++ */ ++static inline struct cfi_ep *get_cfi_ep_by_addr(struct cfiobject *cfi, ++ uint8_t addr) ++{ ++ struct cfi_ep *pcfiep; ++ dwc_list_link_t *tmp; ++ ++ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { ++ pcfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ ++ if (pcfiep->ep->desc->bEndpointAddress == addr) { ++ return pcfiep; ++ } ++ } ++ ++ return NULL; ++} ++ ++/** ++ * This function returns a pointer to cfi_ep_t object that matches ++ * the dwc_otg_pcd_ep object. ++ */ ++static inline struct cfi_ep *get_cfi_ep_by_pcd_ep(struct cfiobject *cfi, ++ struct dwc_otg_pcd_ep *ep) ++{ ++ struct cfi_ep *pcfiep = NULL; ++ dwc_list_link_t *tmp; ++ ++ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { ++ pcfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ if (pcfiep->ep == ep) { ++ return pcfiep; ++ } ++ } ++ return NULL; ++} ++ ++int cfi_setup(struct dwc_otg_pcd *pcd, struct cfi_usb_ctrlrequest *ctrl); ++ ++#endif /* (__DWC_OTG_CFI_H__) */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_cil.c +@@ -0,0 +1,7151 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.c $ ++ * $Revision: #191 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++/** @file ++ * ++ * The Core Interface Layer provides basic services for accessing and ++ * managing the DWC_otg hardware. These services are used by both the ++ * Host Controller Driver and the Peripheral Controller Driver. ++ * ++ * The CIL manages the memory map for the core so that the HCD and PCD ++ * don't have to do this separately. It also handles basic tasks like ++ * reading/writing the registers and data FIFOs in the controller. ++ * Some of the data access functions provide encapsulation of several ++ * operations required to perform a task, such as writing multiple ++ * registers to start a transfer. Finally, the CIL performs basic ++ * services that are not specific to either the host or device modes ++ * of operation. These services include management of the OTG Host ++ * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A ++ * Diagnostic API is also provided to allow testing of the controller ++ * hardware. ++ * ++ * The Core Interface Layer has the following requirements: ++ * - Provides basic controller operations. ++ * - Minimal use of OS services. ++ * - The OS services used will be abstracted by using inline functions ++ * or macros. ++ * ++ */ ++ ++#include "dwc_os.h" ++#include "dwc_otg_regs.h" ++#include "dwc_otg_cil.h" ++ ++static int dwc_otg_setup_params(dwc_otg_core_if_t * core_if); ++ ++/** ++ * This function is called to initialize the DWC_otg CSR data ++ * structures. The register addresses in the device and host ++ * structures are initialized from the base address supplied by the ++ * caller. The calling function must make the OS calls to get the ++ * base address of the DWC_otg controller registers. The core_params ++ * argument holds the parameters that specify how the core should be ++ * configured. ++ * ++ * @param reg_base_addr Base address of DWC_otg core registers ++ * ++ */ ++dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t * reg_base_addr) ++{ ++ dwc_otg_core_if_t *core_if = 0; ++ dwc_otg_dev_if_t *dev_if = 0; ++ dwc_otg_host_if_t *host_if = 0; ++ uint8_t *reg_base = (uint8_t *) reg_base_addr; ++ int i = 0; ++ ++ DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, reg_base_addr); ++ ++ core_if = DWC_ALLOC(sizeof(dwc_otg_core_if_t)); ++ ++ if (core_if == NULL) { ++ DWC_DEBUGPL(DBG_CIL, ++ "Allocation of dwc_otg_core_if_t failed\n"); ++ return 0; ++ } ++ core_if->core_global_regs = (dwc_otg_core_global_regs_t *) reg_base; ++ ++ /* ++ * Allocate the Device Mode structures. ++ */ ++ dev_if = DWC_ALLOC(sizeof(dwc_otg_dev_if_t)); ++ ++ if (dev_if == NULL) { ++ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n"); ++ DWC_FREE(core_if); ++ return 0; ++ } ++ ++ dev_if->dev_global_regs = ++ (dwc_otg_device_global_regs_t *) (reg_base + ++ DWC_DEV_GLOBAL_REG_OFFSET); ++ ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *) ++ (reg_base + DWC_DEV_IN_EP_REG_OFFSET + ++ (i * DWC_EP_REG_OFFSET)); ++ ++ dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *) ++ (reg_base + DWC_DEV_OUT_EP_REG_OFFSET + ++ (i * DWC_EP_REG_OFFSET)); ++ DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n", ++ i, &dev_if->in_ep_regs[i]->diepctl); ++ DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n", ++ i, &dev_if->out_ep_regs[i]->doepctl); ++ } ++ ++ dev_if->speed = 0; // unknown ++ ++ core_if->dev_if = dev_if; ++ ++ /* ++ * Allocate the Host Mode structures. ++ */ ++ host_if = DWC_ALLOC(sizeof(dwc_otg_host_if_t)); ++ ++ if (host_if == NULL) { ++ DWC_DEBUGPL(DBG_CIL, ++ "Allocation of dwc_otg_host_if_t failed\n"); ++ DWC_FREE(dev_if); ++ DWC_FREE(core_if); ++ return 0; ++ } ++ ++ host_if->host_global_regs = (dwc_otg_host_global_regs_t *) ++ (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET); ++ ++ host_if->hprt0 = ++ (uint32_t *) (reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET); ++ ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ host_if->hc_regs[i] = (dwc_otg_hc_regs_t *) ++ (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET + ++ (i * DWC_OTG_CHAN_REGS_OFFSET)); ++ DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n", ++ i, &host_if->hc_regs[i]->hcchar); ++ } ++ ++ host_if->num_host_channels = MAX_EPS_CHANNELS; ++ core_if->host_if = host_if; ++ ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ core_if->data_fifo[i] = ++ (uint32_t *) (reg_base + DWC_OTG_DATA_FIFO_OFFSET + ++ (i * DWC_OTG_DATA_FIFO_SIZE)); ++ DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08lx\n", ++ i, (unsigned long)core_if->data_fifo[i]); ++ } ++ ++ core_if->pcgcctl = (uint32_t *) (reg_base + DWC_OTG_PCGCCTL_OFFSET); ++ ++ /* Initiate lx_state to L3 disconnected state */ ++ core_if->lx_state = DWC_OTG_L3; ++ /* ++ * Store the contents of the hardware configuration registers here for ++ * easy access later. ++ */ ++ core_if->hwcfg1.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->ghwcfg1); ++ core_if->hwcfg2.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->ghwcfg2); ++ core_if->hwcfg3.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->ghwcfg3); ++ core_if->hwcfg4.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->ghwcfg4); ++ ++ /* Force host mode to get HPTXFSIZ exact power on value */ ++ { ++ gusbcfg_data_t gusbcfg = {.d32 = 0 }; ++ gusbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ gusbcfg.b.force_host_mode = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32); ++ dwc_mdelay(100); ++ core_if->hptxfsiz.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz); ++ gusbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ gusbcfg.b.force_host_mode = 0; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32); ++ dwc_mdelay(100); ++ } ++ ++ DWC_DEBUGPL(DBG_CILV, "hwcfg1=%08x\n", core_if->hwcfg1.d32); ++ DWC_DEBUGPL(DBG_CILV, "hwcfg2=%08x\n", core_if->hwcfg2.d32); ++ DWC_DEBUGPL(DBG_CILV, "hwcfg3=%08x\n", core_if->hwcfg3.d32); ++ DWC_DEBUGPL(DBG_CILV, "hwcfg4=%08x\n", core_if->hwcfg4.d32); ++ ++ core_if->hcfg.d32 = ++ DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); ++ core_if->dcfg.d32 = ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); ++ ++ DWC_DEBUGPL(DBG_CILV, "hcfg=%08x\n", core_if->hcfg.d32); ++ DWC_DEBUGPL(DBG_CILV, "dcfg=%08x\n", core_if->dcfg.d32); ++ ++ DWC_DEBUGPL(DBG_CILV, "op_mode=%0x\n", core_if->hwcfg2.b.op_mode); ++ DWC_DEBUGPL(DBG_CILV, "arch=%0x\n", core_if->hwcfg2.b.architecture); ++ DWC_DEBUGPL(DBG_CILV, "num_dev_ep=%d\n", core_if->hwcfg2.b.num_dev_ep); ++ DWC_DEBUGPL(DBG_CILV, "num_host_chan=%d\n", ++ core_if->hwcfg2.b.num_host_chan); ++ DWC_DEBUGPL(DBG_CILV, "nonperio_tx_q_depth=0x%0x\n", ++ core_if->hwcfg2.b.nonperio_tx_q_depth); ++ DWC_DEBUGPL(DBG_CILV, "host_perio_tx_q_depth=0x%0x\n", ++ core_if->hwcfg2.b.host_perio_tx_q_depth); ++ DWC_DEBUGPL(DBG_CILV, "dev_token_q_depth=0x%0x\n", ++ core_if->hwcfg2.b.dev_token_q_depth); ++ ++ DWC_DEBUGPL(DBG_CILV, "Total FIFO SZ=%d\n", ++ core_if->hwcfg3.b.dfifo_depth); ++ DWC_DEBUGPL(DBG_CILV, "xfer_size_cntr_width=%0x\n", ++ core_if->hwcfg3.b.xfer_size_cntr_width); ++ ++ /* ++ * Set the SRP sucess bit for FS-I2c ++ */ ++ core_if->srp_success = 0; ++ core_if->srp_timer_started = 0; ++ ++ /* ++ * Create new workqueue and init works ++ */ ++ core_if->wq_otg = DWC_WORKQ_ALLOC("dwc_otg"); ++ if (core_if->wq_otg == 0) { ++ DWC_WARN("DWC_WORKQ_ALLOC failed\n"); ++ DWC_FREE(host_if); ++ DWC_FREE(dev_if); ++ DWC_FREE(core_if); ++ return 0; ++ } ++ ++ core_if->snpsid = DWC_READ_REG32(&core_if->core_global_regs->gsnpsid); ++ ++ DWC_PRINTF("Core Release: %x.%x%x%x\n", ++ (core_if->snpsid >> 12 & 0xF), ++ (core_if->snpsid >> 8 & 0xF), ++ (core_if->snpsid >> 4 & 0xF), (core_if->snpsid & 0xF)); ++ ++ core_if->wkp_timer = DWC_TIMER_ALLOC("Wake Up Timer", ++ w_wakeup_detected, core_if); ++ if (core_if->wkp_timer == 0) { ++ DWC_WARN("DWC_TIMER_ALLOC failed\n"); ++ DWC_FREE(host_if); ++ DWC_FREE(dev_if); ++ DWC_WORKQ_FREE(core_if->wq_otg); ++ DWC_FREE(core_if); ++ return 0; ++ } ++ ++ if (dwc_otg_setup_params(core_if)) { ++ DWC_WARN("Error while setting core params\n"); ++ } ++ ++ core_if->hibernation_suspend = 0; ++ ++ /** ADP initialization */ ++ dwc_otg_adp_init(core_if); ++ ++ return core_if; ++} ++ ++/** ++ * This function frees the structures allocated by dwc_otg_cil_init(). ++ * ++ * @param core_if The core interface pointer returned from ++ * dwc_otg_cil_init(). ++ * ++ */ ++void dwc_otg_cil_remove(dwc_otg_core_if_t * core_if) ++{ ++ dctl_data_t dctl = {.d32 = 0 }; ++ DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, core_if); ++ ++ /* Disable all interrupts */ ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, 1, 0); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0); ++ ++ dctl.b.sftdiscon = 1; ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, ++ dctl.d32); ++ } ++ ++ if (core_if->wq_otg) { ++ DWC_WORKQ_WAIT_WORK_DONE(core_if->wq_otg, 500); ++ DWC_WORKQ_FREE(core_if->wq_otg); ++ } ++ if (core_if->dev_if) { ++ DWC_FREE(core_if->dev_if); ++ } ++ if (core_if->host_if) { ++ DWC_FREE(core_if->host_if); ++ } ++ ++ /** Remove ADP Stuff */ ++ dwc_otg_adp_remove(core_if); ++ if (core_if->core_params) { ++ DWC_FREE(core_if->core_params); ++ } ++ if (core_if->wkp_timer) { ++ DWC_TIMER_FREE(core_if->wkp_timer); ++ } ++ if (core_if->srp_timer) { ++ DWC_TIMER_FREE(core_if->srp_timer); ++ } ++ DWC_FREE(core_if); ++} ++ ++/** ++ * This function enables the controller's Global Interrupt in the AHB Config ++ * register. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ gahbcfg_data_t ahbcfg = {.d32 = 0 }; ++ ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */ ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32); ++} ++ ++/** ++ * This function disables the controller's Global Interrupt in the AHB Config ++ * register. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ gahbcfg_data_t ahbcfg = {.d32 = 0 }; ++ ahbcfg.b.glblintrmsk = 1; /* Disable interrupts */ ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0); ++} ++ ++/** ++ * This function initializes the commmon interrupts, used in both ++ * device and host modes. ++ * ++ * @param core_if Programming view of the DWC_otg controller ++ * ++ */ ++static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ /* Clear any pending OTG Interrupts */ ++ DWC_WRITE_REG32(&global_regs->gotgint, 0xFFFFFFFF); ++ ++ /* Clear any pending interrupts */ ++ DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* ++ * Enable the interrupts in the GINTMSK. ++ */ ++ intr_mask.b.modemismatch = 1; ++ intr_mask.b.otgintr = 1; ++ ++ if (!core_if->dma_enable) { ++ intr_mask.b.rxstsqlvl = 1; ++ } ++ ++ intr_mask.b.conidstschng = 1; ++ intr_mask.b.wkupintr = 1; ++ intr_mask.b.disconnect = 0; ++ intr_mask.b.usbsuspend = 1; ++ intr_mask.b.sessreqintr = 1; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ if (core_if->core_params->lpm_enable) { ++ intr_mask.b.lpmtranrcvd = 1; ++ } ++#endif ++ DWC_WRITE_REG32(&global_regs->gintmsk, intr_mask.d32); ++} ++ ++/* ++ * The restore operation is modified to support Synopsys Emulated Powerdown and ++ * Hibernation. This function is for exiting from Device mode hibernation by ++ * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup. ++ * @param core_if Programming view of DWC_otg controller. ++ * @param rem_wakeup - indicates whether resume is initiated by Device or Host. ++ * @param reset - indicates whether resume is initiated by Reset. ++ */ ++int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if, ++ int rem_wakeup, int reset) ++{ ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ dctl_data_t dctl = {.d32 = 0 }; ++ ++ int timeout = 2000; ++ ++ if (!core_if->hibernation_suspend) { ++ DWC_PRINTF("Already exited from Hibernation\n"); ++ return 1; ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "%s called\n", __FUNCTION__); ++ /* Switch-on voltage to the core */ ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Reset core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Assert Restore signal */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.restore = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable power clamps */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ if (rem_wakeup) { ++ dwc_udelay(70); ++ } ++ ++ /* Deassert Reset core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable PMU interrupt */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Mask interrupts from gpwrdn */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.connect_det_msk = 1; ++ gpwrdn.b.srp_det_msk = 1; ++ gpwrdn.b.disconn_det_msk = 1; ++ gpwrdn.b.rst_det_msk = 1; ++ gpwrdn.b.lnstchng_msk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Indicates that we are going out from hibernation */ ++ core_if->hibernation_suspend = 0; ++ ++ /* ++ * Set Restore Essential Regs bit in PCGCCTL register, restore_mode = 1 ++ * indicates restore from remote_wakeup ++ */ ++ restore_essential_regs(core_if, rem_wakeup, 0); ++ ++ /* ++ * Wait a little for seeing new value of variable hibernation_suspend if ++ * Restore done interrupt received before polling ++ */ ++ dwc_udelay(10); ++ ++ if (core_if->hibernation_suspend == 0) { ++ /* ++ * Wait For Restore_done Interrupt. This mechanism of polling the ++ * interrupt is introduced to avoid any possible race conditions ++ */ ++ do { ++ gintsts_data_t gintsts; ++ gintsts.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ if (gintsts.b.restoredone) { ++ gintsts.d32 = 0; ++ gintsts.b.restoredone = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs-> ++ gintsts, gintsts.d32); ++ DWC_PRINTF("Restore Done Interrupt seen\n"); ++ break; ++ } ++ dwc_udelay(10); ++ } while (--timeout); ++ if (!timeout) { ++ DWC_PRINTF("Restore Done interrupt wasn't generated here\n"); ++ } ++ } ++ /* Clear all pending interupts */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* De-assert Restore */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.restore = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ if (!rem_wakeup) { ++ pcgcctl.d32 = 0; ++ pcgcctl.b.rstpdwnmodule = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); ++ } ++ ++ /* Restore GUSBCFG and DCFG */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, ++ core_if->gr_backup->gusbcfg_local); ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, ++ core_if->dr_backup->dcfg); ++ ++ /* De-assert Wakeup Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ if (!rem_wakeup) { ++ /* Set Device programming done bit */ ++ dctl.b.pwronprgdone = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ } else { ++ /* Start Remote Wakeup Signaling */ ++ dctl.d32 = core_if->dr_backup->dctl; ++ dctl.b.rmtwkupsig = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32); ++ } ++ ++ dwc_mdelay(2); ++ /* Clear all pending interupts */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* Restore global registers */ ++ dwc_otg_restore_global_regs(core_if); ++ /* Restore device global registers */ ++ dwc_otg_restore_dev_regs(core_if, rem_wakeup); ++ ++ if (rem_wakeup) { ++ dwc_mdelay(7); ++ dctl.d32 = 0; ++ dctl.b.rmtwkupsig = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0); ++ } ++ ++ core_if->hibernation_suspend = 0; ++ /* The core will be in ON STATE */ ++ core_if->lx_state = DWC_OTG_L0; ++ DWC_PRINTF("Hibernation recovery completes here\n"); ++ ++ return 1; ++} ++ ++/* ++ * The restore operation is modified to support Synopsys Emulated Powerdown and ++ * Hibernation. This function is for exiting from Host mode hibernation by ++ * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup. ++ * @param core_if Programming view of DWC_otg controller. ++ * @param rem_wakeup - indicates whether resume is initiated by Device or Host. ++ * @param reset - indicates whether resume is initiated by Reset. ++ */ ++int dwc_otg_host_hibernation_restore(dwc_otg_core_if_t * core_if, ++ int rem_wakeup, int reset) ++{ ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ ++ int timeout = 2000; ++ ++ DWC_DEBUGPL(DBG_HCD, "%s called\n", __FUNCTION__); ++ /* Switch-on voltage to the core */ ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Reset core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Assert Restore signal */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.restore = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable power clamps */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ if (!rem_wakeup) { ++ dwc_udelay(50); ++ } ++ ++ /* Deassert Reset core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable PMU interrupt */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.connect_det_msk = 1; ++ gpwrdn.b.srp_det_msk = 1; ++ gpwrdn.b.disconn_det_msk = 1; ++ gpwrdn.b.rst_det_msk = 1; ++ gpwrdn.b.lnstchng_msk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Indicates that we are going out from hibernation */ ++ core_if->hibernation_suspend = 0; ++ ++ /* Set Restore Essential Regs bit in PCGCCTL register */ ++ restore_essential_regs(core_if, rem_wakeup, 1); ++ ++ /* Wait a little for seeing new value of variable hibernation_suspend if ++ * Restore done interrupt received before polling */ ++ dwc_udelay(10); ++ ++ if (core_if->hibernation_suspend == 0) { ++ /* Wait For Restore_done Interrupt. This mechanism of polling the ++ * interrupt is introduced to avoid any possible race conditions ++ */ ++ do { ++ gintsts_data_t gintsts; ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ if (gintsts.b.restoredone) { ++ gintsts.d32 = 0; ++ gintsts.b.restoredone = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ DWC_DEBUGPL(DBG_HCD,"Restore Done Interrupt seen\n"); ++ break; ++ } ++ dwc_udelay(10); ++ } while (--timeout); ++ if (!timeout) { ++ DWC_WARN("Restore Done interrupt wasn't generated\n"); ++ } ++ } ++ ++ /* Set the flag's value to 0 again after receiving restore done interrupt */ ++ core_if->hibernation_suspend = 0; ++ ++ /* This step is not described in functional spec but if not wait for this ++ * delay, mismatch interrupts occurred because just after restore core is ++ * in Device mode(gintsts.curmode == 0) */ ++ dwc_mdelay(100); ++ ++ /* Clear all pending interrupts */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* De-assert Restore */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.restore = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Restore GUSBCFG and HCFG */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, ++ core_if->gr_backup->gusbcfg_local); ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, ++ core_if->hr_backup->hcfg_local); ++ ++ /* De-assert Wakeup Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Start the Resume operation by programming HPRT0 */ ++ hprt0.d32 = core_if->hr_backup->hprt0_local; ++ hprt0.b.prtpwr = 1; ++ hprt0.b.prtena = 0; ++ hprt0.b.prtsusp = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ ++ DWC_PRINTF("Resume Starts Now\n"); ++ if (!reset) { // Indicates it is Resume Operation ++ hprt0.d32 = core_if->hr_backup->hprt0_local; ++ hprt0.b.prtres = 1; ++ hprt0.b.prtpwr = 1; ++ hprt0.b.prtena = 0; ++ hprt0.b.prtsusp = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ ++ if (!rem_wakeup) ++ hprt0.b.prtres = 0; ++ /* Wait for Resume time and then program HPRT again */ ++ dwc_mdelay(100); ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ ++ } else { // Indicates it is Reset Operation ++ hprt0.d32 = core_if->hr_backup->hprt0_local; ++ hprt0.b.prtrst = 1; ++ hprt0.b.prtpwr = 1; ++ hprt0.b.prtena = 0; ++ hprt0.b.prtsusp = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ /* Wait for Reset time and then program HPRT again */ ++ dwc_mdelay(60); ++ hprt0.b.prtrst = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ } ++ /* Clear all interrupt status */ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtconndet = 1; ++ hprt0.b.prtenchng = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ ++ /* Clear all pending interupts */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* Restore global registers */ ++ dwc_otg_restore_global_regs(core_if); ++ /* Restore host global registers */ ++ dwc_otg_restore_host_regs(core_if, reset); ++ ++ /* The core will be in ON STATE */ ++ core_if->lx_state = DWC_OTG_L0; ++ DWC_PRINTF("Hibernation recovery is complete here\n"); ++ return 0; ++} ++ ++/** Saves some register values into system memory. */ ++int dwc_otg_save_global_regs(dwc_otg_core_if_t * core_if) ++{ ++ struct dwc_otg_global_regs_backup *gr; ++ int i; ++ ++ gr = core_if->gr_backup; ++ if (!gr) { ++ gr = DWC_ALLOC(sizeof(*gr)); ++ if (!gr) { ++ return -DWC_E_NO_MEMORY; ++ } ++ core_if->gr_backup = gr; ++ } ++ ++ gr->gotgctl_local = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++ gr->gintmsk_local = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); ++ gr->gahbcfg_local = DWC_READ_REG32(&core_if->core_global_regs->gahbcfg); ++ gr->gusbcfg_local = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ gr->grxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); ++ gr->gnptxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz); ++ gr->hptxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ gr->glpmcfg_local = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++#endif ++ gr->gi2cctl_local = DWC_READ_REG32(&core_if->core_global_regs->gi2cctl); ++ gr->pcgcctl_local = DWC_READ_REG32(core_if->pcgcctl); ++ gr->gdfifocfg_local = ++ DWC_READ_REG32(&core_if->core_global_regs->gdfifocfg); ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ gr->dtxfsiz_local[i] = ++ DWC_READ_REG32(&(core_if->core_global_regs->dtxfsiz[i])); ++ } ++ ++ DWC_DEBUGPL(DBG_ANY, "===========Backing Global registers==========\n"); ++ DWC_DEBUGPL(DBG_ANY, "Backed up gotgctl = %08x\n", gr->gotgctl_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up gintmsk = %08x\n", gr->gintmsk_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up gahbcfg = %08x\n", gr->gahbcfg_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up gusbcfg = %08x\n", gr->gusbcfg_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up grxfsiz = %08x\n", gr->grxfsiz_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up gnptxfsiz = %08x\n", ++ gr->gnptxfsiz_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up hptxfsiz = %08x\n", ++ gr->hptxfsiz_local); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ DWC_DEBUGPL(DBG_ANY, "Backed up glpmcfg = %08x\n", gr->glpmcfg_local); ++#endif ++ DWC_DEBUGPL(DBG_ANY, "Backed up gi2cctl = %08x\n", gr->gi2cctl_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up pcgcctl = %08x\n", gr->pcgcctl_local); ++ DWC_DEBUGPL(DBG_ANY,"Backed up gdfifocfg = %08x\n",gr->gdfifocfg_local); ++ ++ return 0; ++} ++ ++/** Saves GINTMSK register before setting the msk bits. */ ++int dwc_otg_save_gintmsk_reg(dwc_otg_core_if_t * core_if) ++{ ++ struct dwc_otg_global_regs_backup *gr; ++ ++ gr = core_if->gr_backup; ++ if (!gr) { ++ gr = DWC_ALLOC(sizeof(*gr)); ++ if (!gr) { ++ return -DWC_E_NO_MEMORY; ++ } ++ core_if->gr_backup = gr; ++ } ++ ++ gr->gintmsk_local = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); ++ ++ DWC_DEBUGPL(DBG_ANY,"=============Backing GINTMSK registers============\n"); ++ DWC_DEBUGPL(DBG_ANY, "Backed up gintmsk = %08x\n", gr->gintmsk_local); ++ ++ return 0; ++} ++ ++int dwc_otg_save_dev_regs(dwc_otg_core_if_t * core_if) ++{ ++ struct dwc_otg_dev_regs_backup *dr; ++ int i; ++ ++ dr = core_if->dr_backup; ++ if (!dr) { ++ dr = DWC_ALLOC(sizeof(*dr)); ++ if (!dr) { ++ return -DWC_E_NO_MEMORY; ++ } ++ core_if->dr_backup = dr; ++ } ++ ++ dr->dcfg = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); ++ dr->dctl = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); ++ dr->daintmsk = ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk); ++ dr->diepmsk = ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->diepmsk); ++ dr->doepmsk = ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->doepmsk); ++ ++ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { ++ dr->diepctl[i] = ++ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl); ++ dr->dieptsiz[i] = ++ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->dieptsiz); ++ dr->diepdma[i] = ++ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepdma); ++ } ++ ++ DWC_DEBUGPL(DBG_ANY, ++ "=============Backing Host registers==============\n"); ++ DWC_DEBUGPL(DBG_ANY, "Backed up dcfg = %08x\n", dr->dcfg); ++ DWC_DEBUGPL(DBG_ANY, "Backed up dctl = %08x\n", dr->dctl); ++ DWC_DEBUGPL(DBG_ANY, "Backed up daintmsk = %08x\n", ++ dr->daintmsk); ++ DWC_DEBUGPL(DBG_ANY, "Backed up diepmsk = %08x\n", dr->diepmsk); ++ DWC_DEBUGPL(DBG_ANY, "Backed up doepmsk = %08x\n", dr->doepmsk); ++ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { ++ DWC_DEBUGPL(DBG_ANY, "Backed up diepctl[%d] = %08x\n", i, ++ dr->diepctl[i]); ++ DWC_DEBUGPL(DBG_ANY, "Backed up dieptsiz[%d] = %08x\n", ++ i, dr->dieptsiz[i]); ++ DWC_DEBUGPL(DBG_ANY, "Backed up diepdma[%d] = %08x\n", i, ++ dr->diepdma[i]); ++ } ++ ++ return 0; ++} ++ ++int dwc_otg_save_host_regs(dwc_otg_core_if_t * core_if) ++{ ++ struct dwc_otg_host_regs_backup *hr; ++ int i; ++ ++ hr = core_if->hr_backup; ++ if (!hr) { ++ hr = DWC_ALLOC(sizeof(*hr)); ++ if (!hr) { ++ return -DWC_E_NO_MEMORY; ++ } ++ core_if->hr_backup = hr; ++ } ++ ++ hr->hcfg_local = ++ DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); ++ hr->haintmsk_local = ++ DWC_READ_REG32(&core_if->host_if->host_global_regs->haintmsk); ++ for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) { ++ hr->hcintmsk_local[i] = ++ DWC_READ_REG32(&core_if->host_if->hc_regs[i]->hcintmsk); ++ } ++ hr->hprt0_local = DWC_READ_REG32(core_if->host_if->hprt0); ++ hr->hfir_local = ++ DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir); ++ ++ DWC_DEBUGPL(DBG_ANY, ++ "=============Backing Host registers===============\n"); ++ DWC_DEBUGPL(DBG_ANY, "Backed up hcfg = %08x\n", ++ hr->hcfg_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up haintmsk = %08x\n", hr->haintmsk_local); ++ for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) { ++ DWC_DEBUGPL(DBG_ANY, "Backed up hcintmsk[%02d]=%08x\n", i, ++ hr->hcintmsk_local[i]); ++ } ++ DWC_DEBUGPL(DBG_ANY, "Backed up hprt0 = %08x\n", ++ hr->hprt0_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up hfir = %08x\n", ++ hr->hfir_local); ++ ++ return 0; ++} ++ ++int dwc_otg_restore_global_regs(dwc_otg_core_if_t *core_if) ++{ ++ struct dwc_otg_global_regs_backup *gr; ++ int i; ++ ++ gr = core_if->gr_backup; ++ if (!gr) { ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, gr->gotgctl_local); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gr->gintmsk_local); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gr->gusbcfg_local); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gr->gahbcfg_local); ++ DWC_WRITE_REG32(&core_if->core_global_regs->grxfsiz, gr->grxfsiz_local); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gnptxfsiz, ++ gr->gnptxfsiz_local); ++ DWC_WRITE_REG32(&core_if->core_global_regs->hptxfsiz, ++ gr->hptxfsiz_local); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gdfifocfg, ++ gr->gdfifocfg_local); ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ DWC_WRITE_REG32(&core_if->core_global_regs->dtxfsiz[i], ++ gr->dtxfsiz_local[i]); ++ } ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ DWC_WRITE_REG32(core_if->host_if->hprt0, 0x0000100A); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, ++ (gr->gahbcfg_local)); ++ return 0; ++} ++ ++int dwc_otg_restore_dev_regs(dwc_otg_core_if_t * core_if, int rem_wakeup) ++{ ++ struct dwc_otg_dev_regs_backup *dr; ++ int i; ++ ++ dr = core_if->dr_backup; ++ ++ if (!dr) { ++ return -DWC_E_INVALID; ++ } ++ ++ if (!rem_wakeup) { ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, ++ dr->dctl); ++ } ++ ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daintmsk, dr->daintmsk); ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->diepmsk, dr->diepmsk); ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->doepmsk, dr->doepmsk); ++ ++ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->dieptsiz, dr->dieptsiz[i]); ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->diepdma, dr->diepdma[i]); ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl, dr->diepctl[i]); ++ } ++ ++ return 0; ++} ++ ++int dwc_otg_restore_host_regs(dwc_otg_core_if_t * core_if, int reset) ++{ ++ struct dwc_otg_host_regs_backup *hr; ++ int i; ++ hr = core_if->hr_backup; ++ ++ if (!hr) { ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hr->hcfg_local); ++ //if (!reset) ++ //{ ++ // DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hfir, hr->hfir_local); ++ //} ++ ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haintmsk, ++ hr->haintmsk_local); ++ for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) { ++ DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcintmsk, ++ hr->hcintmsk_local[i]); ++ } ++ ++ return 0; ++} ++ ++int restore_lpm_i2c_regs(dwc_otg_core_if_t * core_if) ++{ ++ struct dwc_otg_global_regs_backup *gr; ++ ++ gr = core_if->gr_backup; ++ ++ /* Restore values for LPM and I2C */ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, gr->glpmcfg_local); ++#endif ++ DWC_WRITE_REG32(&core_if->core_global_regs->gi2cctl, gr->gi2cctl_local); ++ ++ return 0; ++} ++ ++int restore_essential_regs(dwc_otg_core_if_t * core_if, int rmode, int is_host) ++{ ++ struct dwc_otg_global_regs_backup *gr; ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ gahbcfg_data_t gahbcfg = {.d32 = 0 }; ++ gusbcfg_data_t gusbcfg = {.d32 = 0 }; ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ ++ /* Restore LPM and I2C registers */ ++ restore_lpm_i2c_regs(core_if); ++ ++ /* Set PCGCCTL to 0 */ ++ DWC_WRITE_REG32(core_if->pcgcctl, 0x00000000); ++ ++ gr = core_if->gr_backup; ++ /* Load restore values for [31:14] bits */ ++ DWC_WRITE_REG32(core_if->pcgcctl, ++ ((gr->pcgcctl_local & 0xffffc000) | 0x00020000)); ++ ++ /* Umnask global Interrupt in GAHBCFG and restore it */ ++ gahbcfg.d32 = gr->gahbcfg_local; ++ gahbcfg.b.glblintrmsk = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gahbcfg.d32); ++ ++ /* Clear all pending interupts */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* Unmask restore done interrupt */ ++ gintmsk.b.restoredone = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32); ++ ++ /* Restore GUSBCFG and HCFG/DCFG */ ++ gusbcfg.d32 = core_if->gr_backup->gusbcfg_local; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32); ++ ++ if (is_host) { ++ hcfg_data_t hcfg = {.d32 = 0 }; ++ hcfg.d32 = core_if->hr_backup->hcfg_local; ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, ++ hcfg.d32); ++ ++ /* Load restore values for [31:14] bits */ ++ pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000; ++ pcgcctl.d32 = gr->pcgcctl_local | 0x00020000; ++ ++ if (rmode) ++ pcgcctl.b.restoremode = 1; ++ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); ++ dwc_udelay(10); ++ ++ /* Load restore values for [31:14] bits and set EssRegRestored bit */ ++ pcgcctl.d32 = gr->pcgcctl_local | 0xffffc000; ++ pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000; ++ pcgcctl.b.ess_reg_restored = 1; ++ if (rmode) ++ pcgcctl.b.restoremode = 1; ++ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); ++ } else { ++ dcfg_data_t dcfg = {.d32 = 0 }; ++ dcfg.d32 = core_if->dr_backup->dcfg; ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32); ++ ++ /* Load restore values for [31:14] bits */ ++ pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000; ++ pcgcctl.d32 = gr->pcgcctl_local | 0x00020000; ++ if (!rmode) { ++ pcgcctl.d32 |= 0x208; ++ } ++ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); ++ dwc_udelay(10); ++ ++ /* Load restore values for [31:14] bits */ ++ pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000; ++ pcgcctl.d32 = gr->pcgcctl_local | 0x00020000; ++ pcgcctl.b.ess_reg_restored = 1; ++ if (!rmode) ++ pcgcctl.d32 |= 0x208; ++ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); ++ } ++ ++ return 0; ++} ++ ++/** ++ * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY ++ * type. ++ */ ++static void init_fslspclksel(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t val; ++ hcfg_data_t hcfg; ++ ++ if (((core_if->hwcfg2.b.hs_phy_type == 2) && ++ (core_if->hwcfg2.b.fs_phy_type == 1) && ++ (core_if->core_params->ulpi_fs_ls)) || ++ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { ++ /* Full speed PHY */ ++ val = DWC_HCFG_48_MHZ; ++ } else { ++ /* High speed PHY running at full speed or high speed */ ++ val = DWC_HCFG_30_60_MHZ; ++ } ++ ++ DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val); ++ hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); ++ hcfg.b.fslspclksel = val; ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32); ++} ++ ++/** ++ * Initializes the DevSpd field of the DCFG register depending on the PHY type ++ * and the enumeration speed of the device. ++ */ ++static void init_devspd(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t val; ++ dcfg_data_t dcfg; ++ ++ if (((core_if->hwcfg2.b.hs_phy_type == 2) && ++ (core_if->hwcfg2.b.fs_phy_type == 1) && ++ (core_if->core_params->ulpi_fs_ls)) || ++ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { ++ /* Full speed PHY */ ++ val = 0x3; ++ } else if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) { ++ /* High speed PHY running at full speed */ ++ val = 0x1; ++ } else { ++ /* High speed PHY running at high speed */ ++ val = 0x0; ++ } ++ ++ DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val); ++ ++ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); ++ dcfg.b.devspd = val; ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32); ++} ++ ++/** ++ * This function calculates the number of IN EPS ++ * using GHWCFG1 and GHWCFG2 registers values ++ * ++ * @param core_if Programming view of the DWC_otg controller ++ */ ++static uint32_t calc_num_in_eps(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t num_in_eps = 0; ++ uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep; ++ uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 3; ++ uint32_t num_tx_fifos = core_if->hwcfg4.b.num_in_eps; ++ int i; ++ ++ for (i = 0; i < num_eps; ++i) { ++ if (!(hwcfg1 & 0x1)) ++ num_in_eps++; ++ ++ hwcfg1 >>= 2; ++ } ++ ++ if (core_if->hwcfg4.b.ded_fifo_en) { ++ num_in_eps = ++ (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps; ++ } ++ ++ return num_in_eps; ++} ++ ++/** ++ * This function calculates the number of OUT EPS ++ * using GHWCFG1 and GHWCFG2 registers values ++ * ++ * @param core_if Programming view of the DWC_otg controller ++ */ ++static uint32_t calc_num_out_eps(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t num_out_eps = 0; ++ uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep; ++ uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 2; ++ int i; ++ ++ for (i = 0; i < num_eps; ++i) { ++ if (!(hwcfg1 & 0x1)) ++ num_out_eps++; ++ ++ hwcfg1 >>= 2; ++ } ++ return num_out_eps; ++} ++ ++/** ++ * This function initializes the DWC_otg controller registers and ++ * prepares the core for device mode or host mode operation. ++ * ++ * @param core_if Programming view of the DWC_otg controller ++ * ++ */ ++void dwc_otg_core_init(dwc_otg_core_if_t * core_if) ++{ ++ int i = 0; ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ gahbcfg_data_t ahbcfg = {.d32 = 0 }; ++ gusbcfg_data_t usbcfg = {.d32 = 0 }; ++ gi2cctl_data_t i2cctl = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p) regs at %p\n", ++ core_if, global_regs); ++ ++ /* Common Initialization */ ++ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); ++ ++ /* Program the ULPI External VBUS bit if needed */ ++ usbcfg.b.ulpi_ext_vbus_drv = ++ (core_if->core_params->phy_ulpi_ext_vbus == ++ DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0; ++ ++ /* Set external TS Dline pulsing */ ++ usbcfg.b.term_sel_dl_pulse = ++ (core_if->core_params->ts_dline == 1) ? 1 : 0; ++ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); ++ ++ /* Reset the Controller */ ++ dwc_otg_core_reset(core_if); ++ ++ core_if->adp_enable = core_if->core_params->adp_supp_enable; ++ core_if->power_down = core_if->core_params->power_down; ++ core_if->otg_sts = 0; ++ ++ /* Initialize parameters from Hardware configuration registers. */ ++ dev_if->num_in_eps = calc_num_in_eps(core_if); ++ dev_if->num_out_eps = calc_num_out_eps(core_if); ++ ++ DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n", ++ core_if->hwcfg4.b.num_dev_perio_in_ep); ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) { ++ dev_if->perio_tx_fifo_size[i] = ++ DWC_READ_REG32(&global_regs->dtxfsiz[i]) >> 16; ++ DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n", ++ i, dev_if->perio_tx_fifo_size[i]); ++ } ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ dev_if->tx_fifo_size[i] = ++ DWC_READ_REG32(&global_regs->dtxfsiz[i]) >> 16; ++ DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n", ++ i, dev_if->tx_fifo_size[i]); ++ } ++ ++ core_if->total_fifo_size = core_if->hwcfg3.b.dfifo_depth; ++ core_if->rx_fifo_size = DWC_READ_REG32(&global_regs->grxfsiz); ++ core_if->nperio_tx_fifo_size = ++ DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16; ++ ++ DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", core_if->total_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", core_if->rx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n", ++ core_if->nperio_tx_fifo_size); ++ ++ /* This programming sequence needs to happen in FS mode before any other ++ * programming occurs */ ++ if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) && ++ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { ++ /* If FS mode with FS PHY */ ++ ++ /* core_init() is now called on every switch so only call the ++ * following for the first time through. */ ++ if (!core_if->phy_init_done) { ++ core_if->phy_init_done = 1; ++ DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n"); ++ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); ++ usbcfg.b.physel = 1; ++ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); ++ ++ /* Reset after a PHY select */ ++ dwc_otg_core_reset(core_if); ++ } ++ ++ /* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also ++ * do this on HNP Dev/Host mode switches (done in dev_init and ++ * host_init). */ ++ if (dwc_otg_is_host_mode(core_if)) { ++ init_fslspclksel(core_if); ++ } else { ++ init_devspd(core_if); ++ } ++ ++ if (core_if->core_params->i2c_enable) { ++ DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n"); ++ /* Program GUSBCFG.OtgUtmifsSel to I2C */ ++ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); ++ usbcfg.b.otgutmifssel = 1; ++ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); ++ ++ /* Program GI2CCTL.I2CEn */ ++ i2cctl.d32 = DWC_READ_REG32(&global_regs->gi2cctl); ++ i2cctl.b.i2cdevaddr = 1; ++ i2cctl.b.i2cen = 0; ++ DWC_WRITE_REG32(&global_regs->gi2cctl, i2cctl.d32); ++ i2cctl.b.i2cen = 1; ++ DWC_WRITE_REG32(&global_regs->gi2cctl, i2cctl.d32); ++ } ++ ++ } /* endif speed == DWC_SPEED_PARAM_FULL */ ++ else { ++ /* High speed PHY. */ ++ if (!core_if->phy_init_done) { ++ core_if->phy_init_done = 1; ++ /* HS PHY parameters. These parameters are preserved ++ * during soft reset so only program the first time. Do ++ * a soft reset immediately after setting phyif. */ ++ ++ if (core_if->core_params->phy_type == 2) { ++ /* ULPI interface */ ++ usbcfg.b.ulpi_utmi_sel = 1; ++ usbcfg.b.phyif = 0; ++ usbcfg.b.ddrsel = ++ core_if->core_params->phy_ulpi_ddr; ++ } else if (core_if->core_params->phy_type == 1) { ++ /* UTMI+ interface */ ++ usbcfg.b.ulpi_utmi_sel = 0; ++ if (core_if->core_params->phy_utmi_width == 16) { ++ usbcfg.b.phyif = 1; ++ ++ } else { ++ usbcfg.b.phyif = 0; ++ } ++ } else { ++ DWC_ERROR("FS PHY TYPE\n"); ++ } ++ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); ++ /* Reset after setting the PHY parameters */ ++ dwc_otg_core_reset(core_if); ++ } ++ } ++ ++ if ((core_if->hwcfg2.b.hs_phy_type == 2) && ++ (core_if->hwcfg2.b.fs_phy_type == 1) && ++ (core_if->core_params->ulpi_fs_ls)) { ++ DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n"); ++ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); ++ usbcfg.b.ulpi_fsls = 1; ++ usbcfg.b.ulpi_clk_sus_m = 1; ++ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); ++ } else { ++ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); ++ usbcfg.b.ulpi_fsls = 0; ++ usbcfg.b.ulpi_clk_sus_m = 0; ++ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); ++ } ++ ++ /* Program the GAHBCFG Register. */ ++ switch (core_if->hwcfg2.b.architecture) { ++ ++ case DWC_SLAVE_ONLY_ARCH: ++ DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n"); ++ ahbcfg.b.nptxfemplvl_txfemplvl = ++ DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY; ++ ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY; ++ core_if->dma_enable = 0; ++ core_if->dma_desc_enable = 0; ++ break; ++ ++ case DWC_EXT_DMA_ARCH: ++ DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n"); ++ { ++ uint8_t brst_sz = core_if->core_params->dma_burst_size; ++ ahbcfg.b.hburstlen = 0; ++ while (brst_sz > 1) { ++ ahbcfg.b.hburstlen++; ++ brst_sz >>= 1; ++ } ++ } ++ core_if->dma_enable = (core_if->core_params->dma_enable != 0); ++ core_if->dma_desc_enable = ++ (core_if->core_params->dma_desc_enable != 0); ++ break; ++ ++ case DWC_INT_DMA_ARCH: ++ DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n"); ++ /* Old value was DWC_GAHBCFG_INT_DMA_BURST_INCR - done for ++ Host mode ISOC in issue fix - vahrama */ ++ /* Broadcom had altered to (1<<3)|(0<<0) - WRESP=1, max 4 beats */ ++ ahbcfg.b.hburstlen = (1<<3)|(0<<0);//DWC_GAHBCFG_INT_DMA_BURST_INCR4; ++ core_if->dma_enable = (core_if->core_params->dma_enable != 0); ++ core_if->dma_desc_enable = ++ (core_if->core_params->dma_desc_enable != 0); ++ break; ++ ++ } ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable) { ++ DWC_PRINTF("Using Descriptor DMA mode\n"); ++ } else { ++ DWC_PRINTF("Using Buffer DMA mode\n"); ++ ++ } ++ } else { ++ DWC_PRINTF("Using Slave mode\n"); ++ core_if->dma_desc_enable = 0; ++ } ++ ++ if (core_if->core_params->ahb_single) { ++ ahbcfg.b.ahbsingle = 1; ++ } ++ ++ ahbcfg.b.dmaenable = core_if->dma_enable; ++ DWC_WRITE_REG32(&global_regs->gahbcfg, ahbcfg.d32); ++ ++ core_if->en_multiple_tx_fifo = core_if->hwcfg4.b.ded_fifo_en; ++ ++ core_if->pti_enh_enable = core_if->core_params->pti_enable != 0; ++ core_if->multiproc_int_enable = core_if->core_params->mpi_enable; ++ DWC_PRINTF("Periodic Transfer Interrupt Enhancement - %s\n", ++ ((core_if->pti_enh_enable) ? "enabled" : "disabled")); ++ DWC_PRINTF("Multiprocessor Interrupt Enhancement - %s\n", ++ ((core_if->multiproc_int_enable) ? "enabled" : "disabled")); ++ ++ /* ++ * Program the GUSBCFG register. ++ */ ++ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); ++ ++ switch (core_if->hwcfg2.b.op_mode) { ++ case DWC_MODE_HNP_SRP_CAPABLE: ++ usbcfg.b.hnpcap = (core_if->core_params->otg_cap == ++ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE); ++ usbcfg.b.srpcap = (core_if->core_params->otg_cap != ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); ++ break; ++ ++ case DWC_MODE_SRP_ONLY_CAPABLE: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = (core_if->core_params->otg_cap != ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); ++ break; ++ ++ case DWC_MODE_NO_HNP_SRP_CAPABLE: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = 0; ++ break; ++ ++ case DWC_MODE_SRP_CAPABLE_DEVICE: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = (core_if->core_params->otg_cap != ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); ++ break; ++ ++ case DWC_MODE_NO_SRP_CAPABLE_DEVICE: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = 0; ++ break; ++ ++ case DWC_MODE_SRP_CAPABLE_HOST: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = (core_if->core_params->otg_cap != ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); ++ break; ++ ++ case DWC_MODE_NO_SRP_CAPABLE_HOST: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = 0; ++ break; ++ } ++ ++ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ if (core_if->core_params->lpm_enable) { ++ glpmcfg_data_t lpmcfg = {.d32 = 0 }; ++ ++ /* To enable LPM support set lpm_cap_en bit */ ++ lpmcfg.b.lpm_cap_en = 1; ++ ++ /* Make AppL1Res ACK */ ++ lpmcfg.b.appl_resp = 1; ++ ++ /* Retry 3 times */ ++ lpmcfg.b.retry_count = 3; ++ ++ DWC_MODIFY_REG32(&core_if->core_global_regs->glpmcfg, ++ 0, lpmcfg.d32); ++ ++ } ++#endif ++ if (core_if->core_params->ic_usb_cap) { ++ gusbcfg_data_t gusbcfg = {.d32 = 0 }; ++ gusbcfg.b.ic_usb_cap = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gusbcfg, ++ 0, gusbcfg.d32); ++ } ++ { ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ gotgctl.b.otgver = core_if->core_params->otg_ver; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gotgctl, 0, ++ gotgctl.d32); ++ /* Set OTG version supported */ ++ core_if->otg_ver = core_if->core_params->otg_ver; ++ DWC_PRINTF("OTG VER PARAM: %d, OTG VER FLAG: %d\n", ++ core_if->core_params->otg_ver, core_if->otg_ver); ++ } ++ ++ ++ /* Enable common interrupts */ ++ dwc_otg_enable_common_interrupts(core_if); ++ ++ /* Do device or host intialization based on mode during PCD ++ * and HCD initialization */ ++ if (dwc_otg_is_host_mode(core_if)) { ++ DWC_DEBUGPL(DBG_ANY, "Host Mode\n"); ++ core_if->op_state = A_HOST; ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "Device Mode\n"); ++ core_if->op_state = B_PERIPHERAL; ++#ifdef DWC_DEVICE_ONLY ++ dwc_otg_core_dev_init(core_if); ++#endif ++ } ++} ++ ++/** ++ * This function enables the Device mode interrupts. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ */ ++void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ ++ DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__); ++ ++ /* Disable all interrupts. */ ++ DWC_WRITE_REG32(&global_regs->gintmsk, 0); ++ ++ /* Clear any pending interrupts */ ++ DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* Enable the common interrupts */ ++ dwc_otg_enable_common_interrupts(core_if); ++ ++ /* Enable interrupts */ ++ intr_mask.b.usbreset = 1; ++ intr_mask.b.enumdone = 1; ++ /* Disable Disconnect interrupt in Device mode */ ++ intr_mask.b.disconnect = 0; ++ ++ if (!core_if->multiproc_int_enable) { ++ intr_mask.b.inepintr = 1; ++ intr_mask.b.outepintr = 1; ++ } ++ ++ intr_mask.b.erlysuspend = 1; ++ ++ if (core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.epmismatch = 1; ++ } ++ ++ //intr_mask.b.incomplisoout = 1; ++ intr_mask.b.incomplisoin = 1; ++ ++/* Enable the ignore frame number for ISOC xfers - MAS */ ++/* Disable to support high bandwith ISOC transfers - manukz */ ++#if 0 ++#ifdef DWC_UTE_PER_IO ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable) { ++ dctl_data_t dctl1 = {.d32 = 0 }; ++ dctl1.b.ifrmnum = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ dctl, 0, dctl1.d32); ++ DWC_DEBUG("----Enabled Ignore frame number (0x%08x)", ++ DWC_READ_REG32(&core_if->dev_if-> ++ dev_global_regs->dctl)); ++ } ++ } ++#endif ++#endif ++#ifdef DWC_EN_ISOC ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable == 0) { ++ if (core_if->pti_enh_enable) { ++ dctl_data_t dctl = {.d32 = 0 }; ++ dctl.b.ifrmnum = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ dev_if->dev_global_regs->dctl, ++ 0, dctl.d32); ++ } else { ++ intr_mask.b.incomplisoin = 1; ++ intr_mask.b.incomplisoout = 1; ++ } ++ } ++ } else { ++ intr_mask.b.incomplisoin = 1; ++ intr_mask.b.incomplisoout = 1; ++ } ++#endif /* DWC_EN_ISOC */ ++ ++ /** @todo NGS: Should this be a module parameter? */ ++#ifdef USE_PERIODIC_EP ++ intr_mask.b.isooutdrop = 1; ++ intr_mask.b.eopframe = 1; ++ intr_mask.b.incomplisoin = 1; ++ intr_mask.b.incomplisoout = 1; ++#endif ++ ++ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__, ++ DWC_READ_REG32(&global_regs->gintmsk)); ++} ++ ++/** ++ * This function initializes the DWC_otg controller registers for ++ * device mode. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ */ ++void dwc_otg_core_dev_init(dwc_otg_core_if_t * core_if) ++{ ++ int i; ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dwc_otg_core_params_t *params = core_if->core_params; ++ dcfg_data_t dcfg = {.d32 = 0 }; ++ depctl_data_t diepctl = {.d32 = 0 }; ++ grstctl_t resetctl = {.d32 = 0 }; ++ uint32_t rx_fifo_size; ++ fifosize_data_t nptxfifosize; ++ fifosize_data_t txfifosize; ++ dthrctl_data_t dthrctl; ++ fifosize_data_t ptxfifosize; ++ uint16_t rxfsiz, nptxfsiz; ++ gdfifocfg_data_t gdfifocfg = {.d32 = 0 }; ++ hwcfg3_data_t hwcfg3 = {.d32 = 0 }; ++ ++ /* Restart the Phy Clock */ ++ DWC_WRITE_REG32(core_if->pcgcctl, 0); ++ ++ /* Device configuration register */ ++ init_devspd(core_if); ++ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); ++ dcfg.b.descdma = (core_if->dma_desc_enable) ? 1 : 0; ++ dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80; ++ /* Enable Device OUT NAK in case of DDMA mode*/ ++ if (core_if->core_params->dev_out_nak) { ++ dcfg.b.endevoutnak = 1; ++ } ++ ++ if (core_if->core_params->cont_on_bna) { ++ dctl_data_t dctl = {.d32 = 0 }; ++ dctl.b.encontonbna = 1; ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ } ++ ++ ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); ++ ++ /* Configure data FIFO sizes */ ++ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { ++ DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", ++ core_if->total_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", ++ params->dev_rx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", ++ params->dev_nperio_tx_fifo_size); ++ ++ /* Rx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->grxfsiz)); ++ ++#ifdef DWC_UTE_CFI ++ core_if->pwron_rxfsiz = DWC_READ_REG32(&global_regs->grxfsiz); ++ core_if->init_rxfsiz = params->dev_rx_fifo_size; ++#endif ++ rx_fifo_size = params->dev_rx_fifo_size; ++ DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fifo_size); ++ ++ DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->grxfsiz)); ++ ++ /** Set Periodic Tx FIFO Mask all bits 0 */ ++ core_if->p_tx_msk = 0; ++ ++ /** Set Tx FIFO Mask all bits 0 */ ++ core_if->tx_msk = 0; ++ ++ if (core_if->en_multiple_tx_fifo == 0) { ++ /* Non-periodic Tx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->gnptxfsiz)); ++ ++ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; ++ nptxfifosize.b.startaddr = params->dev_rx_fifo_size; ++ ++ DWC_WRITE_REG32(&global_regs->gnptxfsiz, ++ nptxfifosize.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->gnptxfsiz)); ++ ++ /**@todo NGS: Fix Periodic FIFO Sizing! */ ++ /* ++ * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15. ++ * Indexes of the FIFO size module parameters in the ++ * dev_perio_tx_fifo_size array and the FIFO size registers in ++ * the dptxfsiz array run from 0 to 14. ++ */ ++ /** @todo Finish debug of this */ ++ ptxfifosize.b.startaddr = ++ nptxfifosize.b.startaddr + nptxfifosize.b.depth; ++ for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) { ++ ptxfifosize.b.depth = ++ params->dev_perio_tx_fifo_size[i]; ++ DWC_DEBUGPL(DBG_CIL, ++ "initial dtxfsiz[%d]=%08x\n", i, ++ DWC_READ_REG32(&global_regs->dtxfsiz ++ [i])); ++ DWC_WRITE_REG32(&global_regs->dtxfsiz[i], ++ ptxfifosize.d32); ++ DWC_DEBUGPL(DBG_CIL, "new dtxfsiz[%d]=%08x\n", ++ i, ++ DWC_READ_REG32(&global_regs->dtxfsiz ++ [i])); ++ ptxfifosize.b.startaddr += ptxfifosize.b.depth; ++ } ++ } else { ++ /* ++ * Tx FIFOs These FIFOs are numbered from 1 to 15. ++ * Indexes of the FIFO size module parameters in the ++ * dev_tx_fifo_size array and the FIFO size registers in ++ * the dtxfsiz array run from 0 to 14. ++ */ ++ ++ /* Non-periodic Tx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->gnptxfsiz)); ++ ++#ifdef DWC_UTE_CFI ++ core_if->pwron_gnptxfsiz = ++ (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16); ++ core_if->init_gnptxfsiz = ++ params->dev_nperio_tx_fifo_size; ++#endif ++ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; ++ nptxfifosize.b.startaddr = params->dev_rx_fifo_size; ++ ++ DWC_WRITE_REG32(&global_regs->gnptxfsiz, ++ nptxfifosize.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->gnptxfsiz)); ++ ++ txfifosize.b.startaddr = ++ nptxfifosize.b.startaddr + nptxfifosize.b.depth; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ ++ txfifosize.b.depth = ++ params->dev_tx_fifo_size[i]; ++ ++ DWC_DEBUGPL(DBG_CIL, ++ "initial dtxfsiz[%d]=%08x\n", ++ i, ++ DWC_READ_REG32(&global_regs->dtxfsiz ++ [i])); ++ ++#ifdef DWC_UTE_CFI ++ core_if->pwron_txfsiz[i] = ++ (DWC_READ_REG32 ++ (&global_regs->dtxfsiz[i]) >> 16); ++ core_if->init_txfsiz[i] = ++ params->dev_tx_fifo_size[i]; ++#endif ++ DWC_WRITE_REG32(&global_regs->dtxfsiz[i], ++ txfifosize.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, ++ "new dtxfsiz[%d]=%08x\n", ++ i, ++ DWC_READ_REG32(&global_regs->dtxfsiz ++ [i])); ++ ++ txfifosize.b.startaddr += txfifosize.b.depth; ++ } ++ if (core_if->snpsid <= OTG_CORE_REV_2_94a) { ++ /* Calculating DFIFOCFG for Device mode to include RxFIFO and NPTXFIFO */ ++ gdfifocfg.d32 = DWC_READ_REG32(&global_regs->gdfifocfg); ++ hwcfg3.d32 = DWC_READ_REG32(&global_regs->ghwcfg3); ++ gdfifocfg.b.gdfifocfg = (DWC_READ_REG32(&global_regs->ghwcfg3) >> 16); ++ DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32); ++ rxfsiz = (DWC_READ_REG32(&global_regs->grxfsiz) & 0x0000ffff); ++ nptxfsiz = (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16); ++ gdfifocfg.b.epinfobase = rxfsiz + nptxfsiz; ++ DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32); ++ } ++ } ++ ++ /* Flush the FIFOs */ ++ dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */ ++ dwc_otg_flush_rx_fifo(core_if); ++ ++ /* Flush the Learning Queue. */ ++ resetctl.b.intknqflsh = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32); ++ ++ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) { ++ core_if->start_predict = 0; ++ for (i = 0; i<= core_if->dev_if->num_in_eps; ++i) { ++ core_if->nextep_seq[i] = 0xff; // 0xff - EP not active ++ } ++ core_if->nextep_seq[0] = 0; ++ core_if->first_in_nextep_seq = 0; ++ diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl); ++ diepctl.b.nextep = 0; ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32); ++ ++ /* Update IN Endpoint Mismatch Count by active IN NP EP count + 1 */ ++ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); ++ dcfg.b.epmscnt = 2; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); ++ ++ DWC_DEBUGPL(DBG_CILV,"%s first_in_nextep_seq= %2d; nextep_seq[]:\n", ++ __func__, core_if->first_in_nextep_seq); ++ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { ++ DWC_DEBUGPL(DBG_CILV, "%2d ", core_if->nextep_seq[i]); ++ } ++ DWC_DEBUGPL(DBG_CILV,"\n"); ++ } ++ ++ /* Clear all pending Device Interrupts */ ++ /** @todo - if the condition needed to be checked ++ * or in any case all pending interrutps should be cleared? ++ */ ++ if (core_if->multiproc_int_enable) { ++ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { ++ DWC_WRITE_REG32(&dev_if-> ++ dev_global_regs->diepeachintmsk[i], 0); ++ } ++ } ++ ++ for (i = 0; i < core_if->dev_if->num_out_eps; ++i) { ++ DWC_WRITE_REG32(&dev_if-> ++ dev_global_regs->doepeachintmsk[i], 0); ++ } ++ ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->deachint, 0xFFFFFFFF); ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->deachintmsk, 0); ++ } else { ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->diepmsk, 0); ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->doepmsk, 0); ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->daint, 0xFFFFFFFF); ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->daintmsk, 0); ++ } ++ ++ for (i = 0; i <= dev_if->num_in_eps; i++) { ++ depctl_data_t depctl; ++ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ if (depctl.b.epena) { ++ depctl.d32 = 0; ++ depctl.b.epdis = 1; ++ depctl.b.snak = 1; ++ } else { ++ depctl.d32 = 0; ++ } ++ ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32); ++ ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->dieptsiz, 0); ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepdma, 0); ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepint, 0xFF); ++ } ++ ++ for (i = 0; i <= dev_if->num_out_eps; i++) { ++ depctl_data_t depctl; ++ depctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl); ++ if (depctl.b.epena) { ++ dctl_data_t dctl = {.d32 = 0 }; ++ gintmsk_data_t gintsts = {.d32 = 0 }; ++ doepint_data_t doepint = {.d32 = 0 }; ++ dctl.b.sgoutnak = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ do { ++ dwc_udelay(10); ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ } while (!gintsts.b.goutnakeff); ++ gintsts.d32 = 0; ++ gintsts.b.goutnakeff = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ depctl.d32 = 0; ++ depctl.b.epdis = 1; ++ depctl.b.snak = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->doepctl, depctl.d32); ++ do { ++ dwc_udelay(10); ++ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[i]->doepint); ++ } while (!doepint.b.epdisabled); ++ ++ doepint.b.epdisabled = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->doepint, doepint.d32); ++ ++ dctl.d32 = 0; ++ dctl.b.cgoutnak = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ } else { ++ depctl.d32 = 0; ++ } ++ ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, depctl.d32); ++ ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doeptsiz, 0); ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepdma, 0); ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepint, 0xFF); ++ } ++ ++ if (core_if->en_multiple_tx_fifo && core_if->dma_enable) { ++ dev_if->non_iso_tx_thr_en = params->thr_ctl & 0x1; ++ dev_if->iso_tx_thr_en = (params->thr_ctl >> 1) & 0x1; ++ dev_if->rx_thr_en = (params->thr_ctl >> 2) & 0x1; ++ ++ dev_if->rx_thr_length = params->rx_thr_length; ++ dev_if->tx_thr_length = params->tx_thr_length; ++ ++ dev_if->setup_desc_index = 0; ++ ++ dthrctl.d32 = 0; ++ dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en; ++ dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en; ++ dthrctl.b.tx_thr_len = dev_if->tx_thr_length; ++ dthrctl.b.rx_thr_en = dev_if->rx_thr_en; ++ dthrctl.b.rx_thr_len = dev_if->rx_thr_length; ++ dthrctl.b.ahb_thr_ratio = params->ahb_thr_ratio; ++ ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->dtknqr3_dthrctl, ++ dthrctl.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, ++ "Non ISO Tx Thr - %d\nISO Tx Thr - %d\nRx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n", ++ dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en, ++ dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len, ++ dthrctl.b.rx_thr_len); ++ ++ } ++ ++ dwc_otg_enable_device_interrupts(core_if); ++ ++ { ++ diepmsk_data_t msk = {.d32 = 0 }; ++ msk.b.txfifoundrn = 1; ++ if (core_if->multiproc_int_enable) { ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs-> ++ diepeachintmsk[0], msk.d32, msk.d32); ++ } else { ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->diepmsk, ++ msk.d32, msk.d32); ++ } ++ } ++ ++ if (core_if->multiproc_int_enable) { ++ /* Set NAK on Babble */ ++ dctl_data_t dctl = {.d32 = 0 }; ++ dctl.b.nakonbble = 1; ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ } ++ ++ if (core_if->snpsid >= OTG_CORE_REV_2_94a) { ++ dctl_data_t dctl = {.d32 = 0 }; ++ dctl.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dctl); ++ dctl.b.sftdiscon = 0; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->dctl, dctl.d32); ++ } ++} ++ ++/** ++ * This function enables the Host mode interrupts. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ */ ++void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_CIL, "%s(%p)\n", __func__, core_if); ++ ++ /* Disable all interrupts. */ ++ DWC_WRITE_REG32(&global_regs->gintmsk, 0); ++ ++ /* Clear any pending interrupts. */ ++ DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* Enable the common interrupts */ ++ dwc_otg_enable_common_interrupts(core_if); ++ ++ /* ++ * Enable host mode interrupts without disturbing common ++ * interrupts. ++ */ ++ ++ intr_mask.b.disconnect = 1; ++ intr_mask.b.portintr = 1; ++ intr_mask.b.hcintr = 1; ++ ++ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32); ++} ++ ++/** ++ * This function disables the Host Mode interrupts. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ */ ++void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__); ++ ++ /* ++ * Disable host mode interrupts without disturbing common ++ * interrupts. ++ */ ++ intr_mask.b.sofintr = 1; ++ intr_mask.b.portintr = 1; ++ intr_mask.b.hcintr = 1; ++ intr_mask.b.ptxfempty = 1; ++ intr_mask.b.nptxfempty = 1; ++ ++ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, 0); ++} ++ ++/** ++ * This function initializes the DWC_otg controller registers for ++ * host mode. ++ * ++ * This function flushes the Tx and Rx FIFOs and it flushes any entries in the ++ * request queues. Host channels are reset to ensure that they are ready for ++ * performing transfers. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ */ ++void dwc_otg_core_host_init(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ dwc_otg_host_if_t *host_if = core_if->host_if; ++ dwc_otg_core_params_t *params = core_if->core_params; ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ fifosize_data_t nptxfifosize; ++ fifosize_data_t ptxfifosize; ++ uint16_t rxfsiz, nptxfsiz, hptxfsiz; ++ gdfifocfg_data_t gdfifocfg = {.d32 = 0 }; ++ int i; ++ hcchar_data_t hcchar; ++ hcfg_data_t hcfg; ++ hfir_data_t hfir; ++ dwc_otg_hc_regs_t *hc_regs; ++ int num_channels; ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, core_if); ++ ++ /* Restart the Phy Clock */ ++ DWC_WRITE_REG32(core_if->pcgcctl, 0); ++ ++ /* Initialize Host Configuration Register */ ++ init_fslspclksel(core_if); ++ if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) { ++ hcfg.d32 = DWC_READ_REG32(&host_if->host_global_regs->hcfg); ++ hcfg.b.fslssupp = 1; ++ DWC_WRITE_REG32(&host_if->host_global_regs->hcfg, hcfg.d32); ++ ++ } ++ ++ /* This bit allows dynamic reloading of the HFIR register ++ * during runtime. This bit needs to be programmed during ++ * initial configuration and its value must not be changed ++ * during runtime.*/ ++ if (core_if->core_params->reload_ctl == 1) { ++ hfir.d32 = DWC_READ_REG32(&host_if->host_global_regs->hfir); ++ hfir.b.hfirrldctrl = 1; ++ DWC_WRITE_REG32(&host_if->host_global_regs->hfir, hfir.d32); ++ } ++ ++ if (core_if->core_params->dma_desc_enable) { ++ uint8_t op_mode = core_if->hwcfg2.b.op_mode; ++ if (! ++ (core_if->hwcfg4.b.desc_dma ++ && (core_if->snpsid >= OTG_CORE_REV_2_90a) ++ && ((op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ++ || (op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) ++ || (op_mode == ++ DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG) ++ || (op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST) ++ || (op_mode == ++ DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST)))) { ++ ++ DWC_ERROR("Host can't operate in Descriptor DMA mode.\n" ++ "Either core version is below 2.90a or " ++ "GHWCFG2, GHWCFG4 registers' values do not allow Descriptor DMA in host mode.\n" ++ "To run the driver in Buffer DMA host mode set dma_desc_enable " ++ "module parameter to 0.\n"); ++ return; ++ } ++ hcfg.d32 = DWC_READ_REG32(&host_if->host_global_regs->hcfg); ++ hcfg.b.descdma = 1; ++ DWC_WRITE_REG32(&host_if->host_global_regs->hcfg, hcfg.d32); ++ } ++ ++ /* Configure data FIFO sizes */ ++ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { ++ DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", ++ core_if->total_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", ++ params->host_rx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", ++ params->host_nperio_tx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "P Tx FIFO Size=%d\n", ++ params->host_perio_tx_fifo_size); ++ ++ /* Rx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->grxfsiz)); ++ DWC_WRITE_REG32(&global_regs->grxfsiz, ++ params->host_rx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->grxfsiz)); ++ ++ /* Non-periodic Tx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->gnptxfsiz)); ++ nptxfifosize.b.depth = params->host_nperio_tx_fifo_size; ++ nptxfifosize.b.startaddr = params->host_rx_fifo_size; ++ DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfifosize.d32); ++ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->gnptxfsiz)); ++ ++ /* Periodic Tx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial hptxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->hptxfsiz)); ++ ptxfifosize.b.depth = params->host_perio_tx_fifo_size; ++ ptxfifosize.b.startaddr = ++ nptxfifosize.b.startaddr + nptxfifosize.b.depth; ++ DWC_WRITE_REG32(&global_regs->hptxfsiz, ptxfifosize.d32); ++ DWC_DEBUGPL(DBG_CIL, "new hptxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->hptxfsiz)); ++ ++ if (core_if->en_multiple_tx_fifo ++ && core_if->snpsid <= OTG_CORE_REV_2_94a) { ++ /* Global DFIFOCFG calculation for Host mode - include RxFIFO, NPTXFIFO and HPTXFIFO */ ++ gdfifocfg.d32 = DWC_READ_REG32(&global_regs->gdfifocfg); ++ rxfsiz = (DWC_READ_REG32(&global_regs->grxfsiz) & 0x0000ffff); ++ nptxfsiz = (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16); ++ hptxfsiz = (DWC_READ_REG32(&global_regs->hptxfsiz) >> 16); ++ gdfifocfg.b.epinfobase = rxfsiz + nptxfsiz + hptxfsiz; ++ DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32); ++ } ++ } ++ ++ /* TODO - check this */ ++ /* Clear Host Set HNP Enable in the OTG Control Register */ ++ gotgctl.b.hstsethnpen = 1; ++ DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0); ++ /* Make sure the FIFOs are flushed. */ ++ dwc_otg_flush_tx_fifo(core_if, 0x10 /* all TX FIFOs */ ); ++ dwc_otg_flush_rx_fifo(core_if); ++ ++ /* Clear Host Set HNP Enable in the OTG Control Register */ ++ gotgctl.b.hstsethnpen = 1; ++ DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0); ++ ++ if (!core_if->core_params->dma_desc_enable) { ++ /* Flush out any leftover queued requests. */ ++ num_channels = core_if->core_params->host_channels; ++ ++ for (i = 0; i < num_channels; i++) { ++ hc_regs = core_if->host_if->hc_regs[i]; ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcchar.b.chen = 0; ++ hcchar.b.chdis = 1; ++ hcchar.b.epdir = 0; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ } ++ ++ /* Halt all channels to put them into a known state. */ ++ for (i = 0; i < num_channels; i++) { ++ int count = 0; ++ hc_regs = core_if->host_if->hc_regs[i]; ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 1; ++ hcchar.b.epdir = 0; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d regs %p\n", __func__, i, hc_regs); ++ do { ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ if (++count > 1000) { ++ DWC_ERROR ++ ("%s: Unable to clear halt on channel %d (timeout HCCHAR 0x%X @%p)\n", ++ __func__, i, hcchar.d32, &hc_regs->hcchar); ++ break; ++ } ++ dwc_udelay(1); ++ } while (hcchar.b.chen); ++ } ++ } ++ ++ /* Turn on the vbus power. */ ++ DWC_PRINTF("Init: Port Power? op_state=%d\n", core_if->op_state); ++ if (core_if->op_state == A_HOST) { ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ DWC_PRINTF("Init: Power Port (%d)\n", hprt0.b.prtpwr); ++ if (hprt0.b.prtpwr == 0) { ++ hprt0.b.prtpwr = 1; ++ DWC_WRITE_REG32(host_if->hprt0, hprt0.d32); ++ } ++ } ++ ++ dwc_otg_enable_host_interrupts(core_if); ++} ++ ++/** ++ * Prepares a host channel for transferring packets to/from a specific ++ * endpoint. The HCCHARn register is set up with the characteristics specified ++ * in _hc. Host channel interrupts that may need to be serviced while this ++ * transfer is in progress are enabled. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * @param hc Information needed to initialize the host channel ++ */ ++void dwc_otg_hc_init(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ uint32_t intr_enable; ++ hcintmsk_data_t hc_intr_mask; ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ hcchar_data_t hcchar; ++ hcsplt_data_t hcsplt; ++ ++ uint8_t hc_num = hc->hc_num; ++ dwc_otg_host_if_t *host_if = core_if->host_if; ++ dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num]; ++ ++ /* Clear old interrupt conditions for this host channel. */ ++ hc_intr_mask.d32 = 0xFFFFFFFF; ++ hc_intr_mask.b.reserved14_31 = 0; ++ DWC_WRITE_REG32(&hc_regs->hcint, hc_intr_mask.d32); ++ ++ /* Enable channel interrupts required for this transfer. */ ++ hc_intr_mask.d32 = 0; ++ hc_intr_mask.b.chhltd = 1; ++ if (core_if->dma_enable) { ++ /* For Descriptor DMA mode core halts the channel on AHB error. Interrupt is not required */ ++ if (!core_if->dma_desc_enable) ++ hc_intr_mask.b.ahberr = 1; ++ else { ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) ++ hc_intr_mask.b.xfercompl = 1; ++ } ++ ++ if (hc->error_state && !hc->do_split && ++ hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { ++ hc_intr_mask.b.ack = 1; ++ if (hc->ep_is_in) { ++ hc_intr_mask.b.datatglerr = 1; ++ if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) { ++ hc_intr_mask.b.nak = 1; ++ } ++ } ++ } ++ } else { ++ switch (hc->ep_type) { ++ case DWC_OTG_EP_TYPE_CONTROL: ++ case DWC_OTG_EP_TYPE_BULK: ++ hc_intr_mask.b.xfercompl = 1; ++ hc_intr_mask.b.stall = 1; ++ hc_intr_mask.b.xacterr = 1; ++ hc_intr_mask.b.datatglerr = 1; ++ if (hc->ep_is_in) { ++ hc_intr_mask.b.bblerr = 1; ++ } else { ++ hc_intr_mask.b.nak = 1; ++ hc_intr_mask.b.nyet = 1; ++ if (hc->do_ping) { ++ hc_intr_mask.b.ack = 1; ++ } ++ } ++ ++ if (hc->do_split) { ++ hc_intr_mask.b.nak = 1; ++ if (hc->complete_split) { ++ hc_intr_mask.b.nyet = 1; ++ } else { ++ hc_intr_mask.b.ack = 1; ++ } ++ } ++ ++ if (hc->error_state) { ++ hc_intr_mask.b.ack = 1; ++ } ++ break; ++ case DWC_OTG_EP_TYPE_INTR: ++ hc_intr_mask.b.xfercompl = 1; ++ hc_intr_mask.b.nak = 1; ++ hc_intr_mask.b.stall = 1; ++ hc_intr_mask.b.xacterr = 1; ++ hc_intr_mask.b.datatglerr = 1; ++ hc_intr_mask.b.frmovrun = 1; ++ ++ if (hc->ep_is_in) { ++ hc_intr_mask.b.bblerr = 1; ++ } ++ if (hc->error_state) { ++ hc_intr_mask.b.ack = 1; ++ } ++ if (hc->do_split) { ++ if (hc->complete_split) { ++ hc_intr_mask.b.nyet = 1; ++ } else { ++ hc_intr_mask.b.ack = 1; ++ } ++ } ++ break; ++ case DWC_OTG_EP_TYPE_ISOC: ++ hc_intr_mask.b.xfercompl = 1; ++ hc_intr_mask.b.frmovrun = 1; ++ hc_intr_mask.b.ack = 1; ++ ++ if (hc->ep_is_in) { ++ hc_intr_mask.b.xacterr = 1; ++ hc_intr_mask.b.bblerr = 1; ++ } ++ break; ++ } ++ } ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, hc_intr_mask.d32); ++ ++ /* Enable the top level host channel interrupt. */ ++ intr_enable = (1 << hc_num); ++ DWC_MODIFY_REG32(&host_if->host_global_regs->haintmsk, 0, intr_enable); ++ ++ /* Make sure host channel interrupts are enabled. */ ++ gintmsk.b.hcintr = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, gintmsk.d32); ++ ++ /* ++ * Program the HCCHARn register with the endpoint characteristics for ++ * the current transfer. ++ */ ++ hcchar.d32 = 0; ++ hcchar.b.devaddr = hc->dev_addr; ++ hcchar.b.epnum = hc->ep_num; ++ hcchar.b.epdir = hc->ep_is_in; ++ hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW); ++ hcchar.b.eptype = hc->ep_type; ++ hcchar.b.mps = hc->max_packet; ++ ++ DWC_WRITE_REG32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32); ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d, Dev Addr %d, EP #%d\n", ++ __func__, hc->hc_num, hcchar.b.devaddr, hcchar.b.epnum); ++ DWC_DEBUGPL(DBG_HCDV, " Is In %d, Is Low Speed %d, EP Type %d, " ++ "Max Pkt %d, Multi Cnt %d\n", ++ hcchar.b.epdir, hcchar.b.lspddev, hcchar.b.eptype, ++ hcchar.b.mps, hcchar.b.multicnt); ++ ++ /* ++ * Program the HCSPLIT register for SPLITs ++ */ ++ hcsplt.d32 = 0; ++ if (hc->do_split) { ++ DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", ++ hc->hc_num, ++ hc->complete_split ? "CSPLIT" : "SSPLIT"); ++ hcsplt.b.compsplt = hc->complete_split; ++ hcsplt.b.xactpos = hc->xact_pos; ++ hcsplt.b.hubaddr = hc->hub_addr; ++ hcsplt.b.prtaddr = hc->port_addr; ++ DWC_DEBUGPL(DBG_HCDV, "\t comp split %d\n", hc->complete_split); ++ DWC_DEBUGPL(DBG_HCDV, "\t xact pos %d\n", hc->xact_pos); ++ DWC_DEBUGPL(DBG_HCDV, "\t hub addr %d\n", hc->hub_addr); ++ DWC_DEBUGPL(DBG_HCDV, "\t port addr %d\n", hc->port_addr); ++ DWC_DEBUGPL(DBG_HCDV, "\t is_in %d\n", hc->ep_is_in); ++ DWC_DEBUGPL(DBG_HCDV, "\t Max Pkt: %d\n", hcchar.b.mps); ++ DWC_DEBUGPL(DBG_HCDV, "\t xferlen: %d\n", hc->xfer_len); ++ } ++ DWC_WRITE_REG32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32); ++ ++} ++ ++/** ++ * Attempts to halt a host channel. This function should only be called in ++ * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under ++ * normal circumstances in DMA mode, the controller halts the channel when the ++ * transfer is complete or a condition occurs that requires application ++ * intervention. ++ * ++ * In slave mode, checks for a free request queue entry, then sets the Channel ++ * Enable and Channel Disable bits of the Host Channel Characteristics ++ * register of the specified channel to intiate the halt. If there is no free ++ * request queue entry, sets only the Channel Disable bit of the HCCHARn ++ * register to flush requests for this channel. In the latter case, sets a ++ * flag to indicate that the host channel needs to be halted when a request ++ * queue slot is open. ++ * ++ * In DMA mode, always sets the Channel Enable and Channel Disable bits of the ++ * HCCHARn register. The controller ensures there is space in the request ++ * queue before submitting the halt request. ++ * ++ * Some time may elapse before the core flushes any posted requests for this ++ * host channel and halts. The Channel Halted interrupt handler completes the ++ * deactivation of the host channel. ++ * ++ * @param core_if Controller register interface. ++ * @param hc Host channel to halt. ++ * @param halt_status Reason for halting the channel. ++ */ ++void dwc_otg_hc_halt(dwc_otg_core_if_t * core_if, ++ dwc_hc_t * hc, dwc_otg_halt_status_e halt_status) ++{ ++ gnptxsts_data_t nptxsts; ++ hptxsts_data_t hptxsts; ++ hcchar_data_t hcchar; ++ dwc_otg_hc_regs_t *hc_regs; ++ dwc_otg_core_global_regs_t *global_regs; ++ dwc_otg_host_global_regs_t *host_global_regs; ++ ++ hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ global_regs = core_if->core_global_regs; ++ host_global_regs = core_if->host_if->host_global_regs; ++ ++ DWC_ASSERT(!(halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS), ++ "halt_status = %d\n", halt_status); ++ ++ if (halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE || ++ halt_status == DWC_OTG_HC_XFER_AHB_ERR) { ++ /* ++ * Disable all channel interrupts except Ch Halted. The QTD ++ * and QH state associated with this transfer has been cleared ++ * (in the case of URB_DEQUEUE), so the channel needs to be ++ * shut down carefully to prevent crashes. ++ */ ++ hcintmsk_data_t hcintmsk; ++ hcintmsk.d32 = 0; ++ hcintmsk.b.chhltd = 1; ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, hcintmsk.d32); ++ ++ /* ++ * Make sure no other interrupts besides halt are currently ++ * pending. Handling another interrupt could cause a crash due ++ * to the QTD and QH state. ++ */ ++ DWC_WRITE_REG32(&hc_regs->hcint, ~hcintmsk.d32); ++ ++ /* ++ * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR ++ * even if the channel was already halted for some other ++ * reason. ++ */ ++ hc->halt_status = halt_status; ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ if (hcchar.b.chen == 0) { ++ /* ++ * The channel is either already halted or it hasn't ++ * started yet. In DMA mode, the transfer may halt if ++ * it finishes normally or a condition occurs that ++ * requires driver intervention. Don't want to halt ++ * the channel again. In either Slave or DMA mode, ++ * it's possible that the transfer has been assigned ++ * to a channel, but not started yet when an URB is ++ * dequeued. Don't want to halt a channel that hasn't ++ * started yet. ++ */ ++ return; ++ } ++ } ++ if (hc->halt_pending) { ++ /* ++ * A halt has already been issued for this channel. This might ++ * happen when a transfer is aborted by a higher level in ++ * the stack. ++ */ ++#ifdef DEBUG ++ DWC_PRINTF ++ ("*** %s: Channel %d, _hc->halt_pending already set ***\n", ++ __func__, hc->hc_num); ++ ++#endif ++ return; ++ } ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* No need to set the bit in DDMA for disabling the channel */ ++ //TODO check it everywhere channel is disabled ++ if (!core_if->core_params->dma_desc_enable) ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 1; ++ ++ if (!core_if->dma_enable) { ++ /* Check for space in the request queue to issue the halt. */ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || ++ hc->ep_type == DWC_OTG_EP_TYPE_BULK) { ++ nptxsts.d32 = DWC_READ_REG32(&global_regs->gnptxsts); ++ if (nptxsts.b.nptxqspcavail == 0) { ++ hcchar.b.chen = 0; ++ } ++ } else { ++ hptxsts.d32 = ++ DWC_READ_REG32(&host_global_regs->hptxsts); ++ if ((hptxsts.b.ptxqspcavail == 0) ++ || (core_if->queuing_high_bandwidth)) { ++ hcchar.b.chen = 0; ++ } ++ } ++ } ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ ++ hc->halt_status = halt_status; ++ ++ if (hcchar.b.chen) { ++ hc->halt_pending = 1; ++ hc->halt_on_queue = 0; ++ } else { ++ hc->halt_on_queue = 1; ++ } ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " hcchar: 0x%08x\n", hcchar.d32); ++ DWC_DEBUGPL(DBG_HCDV, " halt_pending: %d\n", hc->halt_pending); ++ DWC_DEBUGPL(DBG_HCDV, " halt_on_queue: %d\n", hc->halt_on_queue); ++ DWC_DEBUGPL(DBG_HCDV, " halt_status: %d\n", hc->halt_status); ++ ++ return; ++} ++ ++/** ++ * Clears the transfer state for a host channel. This function is normally ++ * called after a transfer is done and the host channel is being released. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param hc Identifies the host channel to clean up. ++ */ ++void dwc_otg_hc_cleanup(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ dwc_otg_hc_regs_t *hc_regs; ++ ++ hc->xfer_started = 0; ++ ++ /* ++ * Clear channel interrupt enables and any unhandled channel interrupt ++ * conditions. ++ */ ++ hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0); ++ DWC_WRITE_REG32(&hc_regs->hcint, 0xFFFFFFFF); ++#ifdef DEBUG ++ DWC_TIMER_CANCEL(core_if->hc_xfer_timer[hc->hc_num]); ++#endif ++} ++ ++/** ++ * Sets the channel property that indicates in which frame a periodic transfer ++ * should occur. This is always set to the _next_ frame. This function has no ++ * effect on non-periodic transfers. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param hc Identifies the host channel to set up and its properties. ++ * @param hcchar Current value of the HCCHAR register for the specified host ++ * channel. ++ */ ++static inline void hc_set_even_odd_frame(dwc_otg_core_if_t * core_if, ++ dwc_hc_t * hc, hcchar_data_t * hcchar) ++{ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ hfnum_data_t hfnum; ++ hfnum.d32 = ++ DWC_READ_REG32(&core_if->host_if->host_global_regs->hfnum); ++ ++ /* 1 if _next_ frame is odd, 0 if it's even */ ++ hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1; ++#ifdef DEBUG ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR && hc->do_split ++ && !hc->complete_split) { ++ switch (hfnum.b.frnum & 0x7) { ++ case 7: ++ core_if->hfnum_7_samples++; ++ core_if->hfnum_7_frrem_accum += hfnum.b.frrem; ++ break; ++ case 0: ++ core_if->hfnum_0_samples++; ++ core_if->hfnum_0_frrem_accum += hfnum.b.frrem; ++ break; ++ default: ++ core_if->hfnum_other_samples++; ++ core_if->hfnum_other_frrem_accum += ++ hfnum.b.frrem; ++ break; ++ } ++ } ++#endif ++ } ++} ++ ++#ifdef DEBUG ++void hc_xfer_timeout(void *ptr) ++{ ++ hc_xfer_info_t *xfer_info = NULL; ++ int hc_num = 0; ++ ++ if (ptr) ++ xfer_info = (hc_xfer_info_t *) ptr; ++ ++ if (!xfer_info->hc) { ++ DWC_ERROR("xfer_info->hc = %p\n", xfer_info->hc); ++ return; ++ } ++ ++ hc_num = xfer_info->hc->hc_num; ++ DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num); ++ DWC_WARN(" start_hcchar_val 0x%08x\n", ++ xfer_info->core_if->start_hcchar_val[hc_num]); ++} ++#endif ++ ++void ep_xfer_timeout(void *ptr) ++{ ++ ep_xfer_info_t *xfer_info = NULL; ++ int ep_num = 0; ++ dctl_data_t dctl = {.d32 = 0 }; ++ gintsts_data_t gintsts = {.d32 = 0 }; ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ ++ if (ptr) ++ xfer_info = (ep_xfer_info_t *) ptr; ++ ++ if (!xfer_info->ep) { ++ DWC_ERROR("xfer_info->ep = %p\n", xfer_info->ep); ++ return; ++ } ++ ++ ep_num = xfer_info->ep->num; ++ DWC_WARN("%s: timeout on endpoit %d\n", __func__, ep_num); ++ /* Put the sate to 2 as it was time outed */ ++ xfer_info->state = 2; ++ ++ dctl.d32 = ++ DWC_READ_REG32(&xfer_info->core_if->dev_if->dev_global_regs->dctl); ++ gintsts.d32 = ++ DWC_READ_REG32(&xfer_info->core_if->core_global_regs->gintsts); ++ gintmsk.d32 = ++ DWC_READ_REG32(&xfer_info->core_if->core_global_regs->gintmsk); ++ ++ if (!gintmsk.b.goutnakeff) { ++ /* Unmask it */ ++ gintmsk.b.goutnakeff = 1; ++ DWC_WRITE_REG32(&xfer_info->core_if->core_global_regs->gintmsk, ++ gintmsk.d32); ++ ++ } ++ ++ if (!gintsts.b.goutnakeff) { ++ dctl.b.sgoutnak = 1; ++ } ++ DWC_WRITE_REG32(&xfer_info->core_if->dev_if->dev_global_regs->dctl, ++ dctl.d32); ++ ++} ++ ++void set_pid_isoc(dwc_hc_t * hc) ++{ ++ /* Set up the initial PID for the transfer. */ ++ if (hc->speed == DWC_OTG_EP_SPEED_HIGH) { ++ if (hc->ep_is_in) { ++ if (hc->multi_count == 1) { ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA0; ++ } else if (hc->multi_count == 2) { ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA1; ++ } else { ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA2; ++ } ++ } else { ++ if (hc->multi_count == 1) { ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA0; ++ } else { ++ hc->data_pid_start = DWC_OTG_HC_PID_MDATA; ++ } ++ } ++ } else { ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA0; ++ } ++} ++ ++/** ++ * This function does the setup for a data transfer for a host channel and ++ * starts the transfer. May be called in either Slave mode or DMA mode. In ++ * Slave mode, the caller must ensure that there is sufficient space in the ++ * request queue and Tx Data FIFO. ++ * ++ * For an OUT transfer in Slave mode, it loads a data packet into the ++ * appropriate FIFO. If necessary, additional data packets will be loaded in ++ * the Host ISR. ++ * ++ * For an IN transfer in Slave mode, a data packet is requested. The data ++ * packets are unloaded from the Rx FIFO in the Host ISR. If necessary, ++ * additional data packets are requested in the Host ISR. ++ * ++ * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ ++ * register along with a packet count of 1 and the channel is enabled. This ++ * causes a single PING transaction to occur. Other fields in HCTSIZ are ++ * simply set to 0 since no data transfer occurs in this case. ++ * ++ * For a PING transfer in DMA mode, the HCTSIZ register is initialized with ++ * all the information required to perform the subsequent data transfer. In ++ * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the ++ * controller performs the entire PING protocol, then starts the data ++ * transfer. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param hc Information needed to initialize the host channel. The xfer_len ++ * value may be reduced to accommodate the max widths of the XferSize and ++ * PktCnt fields in the HCTSIZn register. The multi_count value may be changed ++ * to reflect the final xfer_len value. ++ */ ++void dwc_otg_hc_start_transfer(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ hcchar_data_t hcchar; ++ hctsiz_data_t hctsiz; ++ uint16_t num_packets; ++ uint32_t max_hc_xfer_size = core_if->core_params->max_transfer_size; ++ uint16_t max_hc_pkt_count = core_if->core_params->max_packet_count; ++ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ ++ hctsiz.d32 = 0; ++ ++ if (hc->do_ping) { ++ if (!core_if->dma_enable) { ++ dwc_otg_hc_do_ping(core_if, hc); ++ hc->xfer_started = 1; ++ return; ++ } else { ++ hctsiz.b.dopng = 1; ++ } ++ } ++ ++ if (hc->do_split) { ++ num_packets = 1; ++ ++ if (hc->complete_split && !hc->ep_is_in) { ++ /* For CSPLIT OUT Transfer, set the size to 0 so the ++ * core doesn't expect any data written to the FIFO */ ++ hc->xfer_len = 0; ++ } else if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) { ++ hc->xfer_len = hc->max_packet; ++ } else if (!hc->ep_is_in && (hc->xfer_len > 188)) { ++ hc->xfer_len = 188; ++ } ++ ++ hctsiz.b.xfersize = hc->xfer_len; ++ } else { ++ /* ++ * Ensure that the transfer length and packet count will fit ++ * in the widths allocated for them in the HCTSIZn register. ++ */ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * Make sure the transfer size is no larger than one ++ * (micro)frame's worth of data. (A check was done ++ * when the periodic transfer was accepted to ensure ++ * that a (micro)frame's worth of data can be ++ * programmed into a channel.) ++ */ ++ uint32_t max_periodic_len = ++ hc->multi_count * hc->max_packet; ++ if (hc->xfer_len > max_periodic_len) { ++ hc->xfer_len = max_periodic_len; ++ } else { ++ } ++ } else if (hc->xfer_len > max_hc_xfer_size) { ++ /* Make sure that xfer_len is a multiple of max packet size. */ ++ hc->xfer_len = max_hc_xfer_size - hc->max_packet + 1; ++ } ++ ++ if (hc->xfer_len > 0) { ++ num_packets = ++ (hc->xfer_len + hc->max_packet - ++ 1) / hc->max_packet; ++ if (num_packets > max_hc_pkt_count) { ++ num_packets = max_hc_pkt_count; ++ hc->xfer_len = num_packets * hc->max_packet; ++ } ++ } else { ++ /* Need 1 packet for transfer length of 0. */ ++ num_packets = 1; ++ } ++ ++ if (hc->ep_is_in) { ++ /* Always program an integral # of max packets for IN transfers. */ ++ hc->xfer_len = num_packets * hc->max_packet; ++ } ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * Make sure that the multi_count field matches the ++ * actual transfer length. ++ */ ++ hc->multi_count = num_packets; ++ } ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) ++ set_pid_isoc(hc); ++ ++ hctsiz.b.xfersize = hc->xfer_len; ++ } ++ ++ hc->start_pkt_count = num_packets; ++ hctsiz.b.pktcnt = num_packets; ++ hctsiz.b.pid = hc->data_pid_start; ++ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " Xfer Size: %d\n", hctsiz.b.xfersize); ++ DWC_DEBUGPL(DBG_HCDV, " Num Pkts: %d\n", hctsiz.b.pktcnt); ++ DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid); ++ ++ if (core_if->dma_enable) { ++ dwc_dma_t dma_addr; ++ if (hc->align_buff) { ++ dma_addr = hc->align_buff; ++ } else { ++ dma_addr = ((unsigned long)hc->xfer_buff & 0xffffffff); ++ } ++ DWC_WRITE_REG32(&hc_regs->hcdma, dma_addr); ++ } ++ ++ /* Start the split */ ++ if (hc->do_split) { ++ hcsplt_data_t hcsplt; ++ hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt); ++ hcsplt.b.spltena = 1; ++ DWC_WRITE_REG32(&hc_regs->hcsplt, hcsplt.d32); ++ } ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcchar.b.multicnt = hc->multi_count; ++ hc_set_even_odd_frame(core_if, hc, &hcchar); ++#ifdef DEBUG ++ core_if->start_hcchar_val[hc->hc_num] = hcchar.d32; ++ if (hcchar.b.chdis) { ++ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", ++ __func__, hc->hc_num, hcchar.d32); ++ } ++#endif ++ ++ /* Set host channel enable after all other setup is complete. */ ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 0; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ ++ hc->xfer_started = 1; ++ hc->requests++; ++ ++ if (!core_if->dma_enable && !hc->ep_is_in && hc->xfer_len > 0) { ++ /* Load OUT packet into the appropriate Tx FIFO. */ ++ dwc_otg_hc_write_packet(core_if, hc); ++ } ++#ifdef DEBUG ++ if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) { ++ DWC_DEBUGPL(DBG_HCDV, "transfer %d from core_if %p\n", ++ hc->hc_num, core_if);//GRAYG ++ core_if->hc_xfer_info[hc->hc_num].core_if = core_if; ++ core_if->hc_xfer_info[hc->hc_num].hc = hc; ++ ++ /* Start a timer for this transfer. */ ++ DWC_TIMER_SCHEDULE(core_if->hc_xfer_timer[hc->hc_num], 10000); ++ } ++#endif ++} ++ ++/** ++ * This function does the setup for a data transfer for a host channel ++ * and starts the transfer in Descriptor DMA mode. ++ * ++ * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set. ++ * Sets PID and NTD values. For periodic transfers ++ * initializes SCHED_INFO field with micro-frame bitmap. ++ * ++ * Initializes HCDMA register with descriptor list address and CTD value ++ * then starts the transfer via enabling the channel. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param hc Information needed to initialize the host channel. ++ */ ++void dwc_otg_hc_start_transfer_ddma(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ hcchar_data_t hcchar; ++ hctsiz_data_t hctsiz; ++ hcdma_data_t hcdma; ++ ++ hctsiz.d32 = 0; ++ ++ if (hc->do_ping) ++ hctsiz.b_ddma.dopng = 1; ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) ++ set_pid_isoc(hc); ++ ++ /* Packet Count and Xfer Size are not used in Descriptor DMA mode */ ++ hctsiz.b_ddma.pid = hc->data_pid_start; ++ hctsiz.b_ddma.ntd = hc->ntd - 1; /* 0 - 1 descriptor, 1 - 2 descriptors, etc. */ ++ hctsiz.b_ddma.schinfo = hc->schinfo; /* Non-zero only for high-speed interrupt endpoints */ ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid); ++ DWC_DEBUGPL(DBG_HCDV, " NTD: %d\n", hctsiz.b_ddma.ntd); ++ ++ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ hcdma.d32 = 0; ++ hcdma.b.dma_addr = ((uint32_t) hc->desc_list_addr) >> 11; ++ ++ /* Always start from first descriptor. */ ++ hcdma.b.ctd = 0; ++ DWC_WRITE_REG32(&hc_regs->hcdma, hcdma.d32); ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcchar.b.multicnt = hc->multi_count; ++ ++#ifdef DEBUG ++ core_if->start_hcchar_val[hc->hc_num] = hcchar.d32; ++ if (hcchar.b.chdis) { ++ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", ++ __func__, hc->hc_num, hcchar.d32); ++ } ++#endif ++ ++ /* Set host channel enable after all other setup is complete. */ ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 0; ++ ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ ++ hc->xfer_started = 1; ++ hc->requests++; ++ ++#ifdef DEBUG ++ if ((hc->ep_type != DWC_OTG_EP_TYPE_INTR) ++ && (hc->ep_type != DWC_OTG_EP_TYPE_ISOC)) { ++ DWC_DEBUGPL(DBG_HCDV, "DMA transfer %d from core_if %p\n", ++ hc->hc_num, core_if);//GRAYG ++ core_if->hc_xfer_info[hc->hc_num].core_if = core_if; ++ core_if->hc_xfer_info[hc->hc_num].hc = hc; ++ /* Start a timer for this transfer. */ ++ DWC_TIMER_SCHEDULE(core_if->hc_xfer_timer[hc->hc_num], 10000); ++ } ++#endif ++ ++} ++ ++/** ++ * This function continues a data transfer that was started by previous call ++ * to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is ++ * sufficient space in the request queue and Tx Data FIFO. This function ++ * should only be called in Slave mode. In DMA mode, the controller acts ++ * autonomously to complete transfers programmed to a host channel. ++ * ++ * For an OUT transfer, a new data packet is loaded into the appropriate FIFO ++ * if there is any data remaining to be queued. For an IN transfer, another ++ * data packet is always requested. For the SETUP phase of a control transfer, ++ * this function does nothing. ++ * ++ * @return 1 if a new request is queued, 0 if no more requests are required ++ * for this transfer. ++ */ ++int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ ++ if (hc->do_split) { ++ /* SPLITs always queue just once per channel */ ++ return 0; ++ } else if (hc->data_pid_start == DWC_OTG_HC_PID_SETUP) { ++ /* SETUPs are queued only once since they can't be NAKed. */ ++ return 0; ++ } else if (hc->ep_is_in) { ++ /* ++ * Always queue another request for other IN transfers. If ++ * back-to-back INs are issued and NAKs are received for both, ++ * the driver may still be processing the first NAK when the ++ * second NAK is received. When the interrupt handler clears ++ * the NAK interrupt for the first NAK, the second NAK will ++ * not be seen. So we can't depend on the NAK interrupt ++ * handler to requeue a NAKed request. Instead, IN requests ++ * are issued each time this function is called. When the ++ * transfer completes, the extra requests for the channel will ++ * be flushed. ++ */ ++ hcchar_data_t hcchar; ++ dwc_otg_hc_regs_t *hc_regs = ++ core_if->host_if->hc_regs[hc->hc_num]; ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hc_set_even_odd_frame(core_if, hc, &hcchar); ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 0; ++ DWC_DEBUGPL(DBG_HCDV, " IN xfer: hcchar = 0x%08x\n", ++ hcchar.d32); ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ hc->requests++; ++ return 1; ++ } else { ++ /* OUT transfers. */ ++ if (hc->xfer_count < hc->xfer_len) { ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ hcchar_data_t hcchar; ++ dwc_otg_hc_regs_t *hc_regs; ++ hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hc_set_even_odd_frame(core_if, hc, &hcchar); ++ } ++ ++ /* Load OUT packet into the appropriate Tx FIFO. */ ++ dwc_otg_hc_write_packet(core_if, hc); ++ hc->requests++; ++ return 1; ++ } else { ++ return 0; ++ } ++ } ++} ++ ++/** ++ * Starts a PING transfer. This function should only be called in Slave mode. ++ * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled. ++ */ ++void dwc_otg_hc_do_ping(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ hcchar_data_t hcchar; ++ hctsiz_data_t hctsiz; ++ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ ++ hctsiz.d32 = 0; ++ hctsiz.b.dopng = 1; ++ hctsiz.b.pktcnt = 1; ++ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 0; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++} ++ ++/* ++ * This function writes a packet into the Tx FIFO associated with the Host ++ * Channel. For a channel associated with a non-periodic EP, the non-periodic ++ * Tx FIFO is written. For a channel associated with a periodic EP, the ++ * periodic Tx FIFO is written. This function should only be called in Slave ++ * mode. ++ * ++ * Upon return the xfer_buff and xfer_count fields in _hc are incremented by ++ * then number of bytes written to the Tx FIFO. ++ */ ++void dwc_otg_hc_write_packet(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ uint32_t i; ++ uint32_t remaining_count; ++ uint32_t byte_count; ++ uint32_t dword_count; ++ ++ uint32_t *data_buff = (uint32_t *) (hc->xfer_buff); ++ uint32_t *data_fifo = core_if->data_fifo[hc->hc_num]; ++ ++ remaining_count = hc->xfer_len - hc->xfer_count; ++ if (remaining_count > hc->max_packet) { ++ byte_count = hc->max_packet; ++ } else { ++ byte_count = remaining_count; ++ } ++ ++ dword_count = (byte_count + 3) / 4; ++ ++ if ((((unsigned long)data_buff) & 0x3) == 0) { ++ /* xfer_buff is DWORD aligned. */ ++ for (i = 0; i < dword_count; i++, data_buff++) { ++ DWC_WRITE_REG32(data_fifo, *data_buff); ++ } ++ } else { ++ /* xfer_buff is not DWORD aligned. */ ++ for (i = 0; i < dword_count; i++, data_buff++) { ++ uint32_t data; ++ data = ++ (data_buff[0] | data_buff[1] << 8 | data_buff[2] << ++ 16 | data_buff[3] << 24); ++ DWC_WRITE_REG32(data_fifo, data); ++ } ++ } ++ ++ hc->xfer_count += byte_count; ++ hc->xfer_buff += byte_count; ++} ++ ++/** ++ * Gets the current USB frame number. This is the frame number from the last ++ * SOF packet. ++ */ ++uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t * core_if) ++{ ++ dsts_data_t dsts; ++ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ /* read current frame/microframe number from DSTS register */ ++ return dsts.b.soffn; ++} ++ ++/** ++ * Calculates and gets the frame Interval value of HFIR register according PHY ++ * type and speed.The application can modify a value of HFIR register only after ++ * the Port Enable bit of the Host Port Control and Status register ++ * (HPRT.PrtEnaPort) has been set. ++*/ ++ ++uint32_t calc_frame_interval(dwc_otg_core_if_t * core_if) ++{ ++ gusbcfg_data_t usbcfg; ++ hwcfg2_data_t hwcfg2; ++ hprt0_data_t hprt0; ++ int clock = 60; // default value ++ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ hwcfg2.d32 = DWC_READ_REG32(&core_if->core_global_regs->ghwcfg2); ++ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); ++ if (!usbcfg.b.physel && usbcfg.b.ulpi_utmi_sel && !usbcfg.b.phyif) ++ clock = 60; ++ if (usbcfg.b.physel && hwcfg2.b.fs_phy_type == 3) ++ clock = 48; ++ if (!usbcfg.b.phylpwrclksel && !usbcfg.b.physel && ++ !usbcfg.b.ulpi_utmi_sel && usbcfg.b.phyif) ++ clock = 30; ++ if (!usbcfg.b.phylpwrclksel && !usbcfg.b.physel && ++ !usbcfg.b.ulpi_utmi_sel && !usbcfg.b.phyif) ++ clock = 60; ++ if (usbcfg.b.phylpwrclksel && !usbcfg.b.physel && ++ !usbcfg.b.ulpi_utmi_sel && usbcfg.b.phyif) ++ clock = 48; ++ if (usbcfg.b.physel && !usbcfg.b.phyif && hwcfg2.b.fs_phy_type == 2) ++ clock = 48; ++ if (usbcfg.b.physel && hwcfg2.b.fs_phy_type == 1) ++ clock = 48; ++ if (hprt0.b.prtspd == 0) ++ /* High speed case */ ++ return 125 * clock; ++ else ++ /* FS/LS case */ ++ return 1000 * clock; ++} ++ ++/** ++ * This function reads a setup packet from the Rx FIFO into the destination ++ * buffer. This function is called from the Rx Status Queue Level (RxStsQLvl) ++ * Interrupt routine when a SETUP packet has been received in Slave mode. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dest Destination buffer for packet data. ++ */ ++void dwc_otg_read_setup_packet(dwc_otg_core_if_t * core_if, uint32_t * dest) ++{ ++ device_grxsts_data_t status; ++ /* Get the 8 bytes of a setup transaction data */ ++ ++ /* Pop 2 DWORDS off the receive data FIFO into memory */ ++ dest[0] = DWC_READ_REG32(core_if->data_fifo[0]); ++ dest[1] = DWC_READ_REG32(core_if->data_fifo[0]); ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { ++ status.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->grxstsp); ++ DWC_DEBUGPL(DBG_ANY, ++ "EP:%d BCnt:%d " "pktsts:%x Frame:%d(0x%0x)\n", ++ status.b.epnum, status.b.bcnt, status.b.pktsts, ++ status.b.fn, status.b.fn); ++ } ++} ++ ++/** ++ * This function enables EP0 OUT to receive SETUP packets and configures EP0 ++ * IN for transmitting packets. It is normally called when the ++ * "Enumeration Done" interrupt occurs. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP0 data. ++ */ ++void dwc_otg_ep0_activate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dsts_data_t dsts; ++ depctl_data_t diepctl; ++ depctl_data_t doepctl; ++ dctl_data_t dctl = {.d32 = 0 }; ++ ++ ep->stp_rollover = 0; ++ /* Read the Device Status and Endpoint 0 Control registers */ ++ dsts.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dsts); ++ diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl); ++ doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl); ++ ++ /* Set the MPS of the IN EP based on the enumeration speed */ ++ switch (dsts.b.enumspd) { ++ case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ: ++ case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ: ++ case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ: ++ diepctl.b.mps = DWC_DEP0CTL_MPS_64; ++ break; ++ case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ: ++ diepctl.b.mps = DWC_DEP0CTL_MPS_8; ++ break; ++ } ++ ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32); ++ ++ /* Enable OUT EP for receive */ ++ if (core_if->snpsid <= OTG_CORE_REV_2_94a) { ++ doepctl.b.epena = 1; ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32); ++ } ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, "doepctl0=%0x\n", ++ DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl)); ++ DWC_DEBUGPL(DBG_PCDV, "diepctl0=%0x\n", ++ DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl)); ++#endif ++ dctl.b.cgnpinnak = 1; ++ ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); ++ DWC_DEBUGPL(DBG_PCDV, "dctl=%0x\n", ++ DWC_READ_REG32(&dev_if->dev_global_regs->dctl)); ++ ++} ++ ++/** ++ * This function activates an EP. The Device EP control register for ++ * the EP is configured as defined in the ep structure. Note: This ++ * function is not used for EP0. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to activate. ++ */ ++void dwc_otg_ep_activate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ depctl_data_t depctl; ++ volatile uint32_t *addr; ++ daint_data_t daintmsk = {.d32 = 0 }; ++ dcfg_data_t dcfg; ++ uint8_t i; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, ep->num, ++ (ep->is_in ? "IN" : "OUT")); ++ ++#ifdef DWC_UTE_PER_IO ++ ep->xiso_frame_num = 0xFFFFFFFF; ++ ep->xiso_active_xfers = 0; ++ ep->xiso_queued_xfers = 0; ++#endif ++ /* Read DEPCTLn register */ ++ if (ep->is_in == 1) { ++ addr = &dev_if->in_ep_regs[ep->num]->diepctl; ++ daintmsk.ep.in = 1 << ep->num; ++ } else { ++ addr = &dev_if->out_ep_regs[ep->num]->doepctl; ++ daintmsk.ep.out = 1 << ep->num; ++ } ++ ++ /* If the EP is already active don't change the EP Control ++ * register. */ ++ depctl.d32 = DWC_READ_REG32(addr); ++ if (!depctl.b.usbactep) { ++ depctl.b.mps = ep->maxpacket; ++ depctl.b.eptype = ep->type; ++ depctl.b.txfnum = ep->tx_fifo_num; ++ ++ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ depctl.b.setd0pid = 1; // ??? ++ } else { ++ depctl.b.setd0pid = 1; ++ } ++ depctl.b.usbactep = 1; ++ ++ /* Update nextep_seq array and EPMSCNT in DCFG*/ ++ if (!(depctl.b.eptype & 1) && (ep->is_in == 1)) { // NP IN EP ++ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { ++ if (core_if->nextep_seq[i] == core_if->first_in_nextep_seq) ++ break; ++ } ++ core_if->nextep_seq[i] = ep->num; ++ core_if->nextep_seq[ep->num] = core_if->first_in_nextep_seq; ++ depctl.b.nextep = core_if->nextep_seq[ep->num]; ++ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); ++ dcfg.b.epmscnt++; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "%s first_in_nextep_seq= %2d; nextep_seq[]:\n", ++ __func__, core_if->first_in_nextep_seq); ++ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { ++ DWC_DEBUGPL(DBG_PCDV, "%2d\n", ++ core_if->nextep_seq[i]); ++ } ++ ++ } ++ ++ ++ DWC_WRITE_REG32(addr, depctl.d32); ++ DWC_DEBUGPL(DBG_PCDV, "DEPCTL=%08x\n", DWC_READ_REG32(addr)); ++ } ++ ++ /* Enable the Interrupt for this EP */ ++ if (core_if->multiproc_int_enable) { ++ if (ep->is_in == 1) { ++ diepmsk_data_t diepmsk = {.d32 = 0 }; ++ diepmsk.b.xfercompl = 1; ++ diepmsk.b.timeout = 1; ++ diepmsk.b.epdisabled = 1; ++ diepmsk.b.ahberr = 1; ++ diepmsk.b.intknepmis = 1; ++ if (!core_if->en_multiple_tx_fifo && core_if->dma_enable) ++ diepmsk.b.intknepmis = 0; ++ diepmsk.b.txfifoundrn = 1; //????? ++ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ diepmsk.b.nak = 1; ++ } ++ ++ ++ ++/* ++ if (core_if->dma_desc_enable) { ++ diepmsk.b.bna = 1; ++ } ++*/ ++/* ++ if (core_if->dma_enable) { ++ doepmsk.b.nak = 1; ++ } ++*/ ++ DWC_WRITE_REG32(&dev_if->dev_global_regs-> ++ diepeachintmsk[ep->num], diepmsk.d32); ++ ++ } else { ++ doepmsk_data_t doepmsk = {.d32 = 0 }; ++ doepmsk.b.xfercompl = 1; ++ doepmsk.b.ahberr = 1; ++ doepmsk.b.epdisabled = 1; ++ if (ep->type == DWC_OTG_EP_TYPE_ISOC) ++ doepmsk.b.outtknepdis = 1; ++ ++/* ++ ++ if (core_if->dma_desc_enable) { ++ doepmsk.b.bna = 1; ++ } ++*/ ++/* ++ doepmsk.b.babble = 1; ++ doepmsk.b.nyet = 1; ++ doepmsk.b.nak = 1; ++*/ ++ DWC_WRITE_REG32(&dev_if->dev_global_regs-> ++ doepeachintmsk[ep->num], doepmsk.d32); ++ } ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->deachintmsk, ++ 0, daintmsk.d32); ++ } else { ++ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ if (ep->is_in) { ++ diepmsk_data_t diepmsk = {.d32 = 0 }; ++ diepmsk.b.nak = 1; ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->diepmsk, 0, diepmsk.d32); ++ } else { ++ doepmsk_data_t doepmsk = {.d32 = 0 }; ++ doepmsk.b.outtknepdis = 1; ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->doepmsk, 0, doepmsk.d32); ++ } ++ } ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->daintmsk, ++ 0, daintmsk.d32); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "DAINTMSK=%0x\n", ++ DWC_READ_REG32(&dev_if->dev_global_regs->daintmsk)); ++ ++ ep->stall_clear_flag = 0; ++ ++ return; ++} ++ ++/** ++ * This function deactivates an EP. This is done by clearing the USB Active ++ * EP bit in the Device EP control register. Note: This function is not used ++ * for EP0. EP0 cannot be deactivated. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to deactivate. ++ */ ++void dwc_otg_ep_deactivate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl = {.d32 = 0 }; ++ volatile uint32_t *addr; ++ daint_data_t daintmsk = {.d32 = 0 }; ++ dcfg_data_t dcfg; ++ uint8_t i = 0; ++ ++#ifdef DWC_UTE_PER_IO ++ ep->xiso_frame_num = 0xFFFFFFFF; ++ ep->xiso_active_xfers = 0; ++ ep->xiso_queued_xfers = 0; ++#endif ++ ++ /* Read DEPCTLn register */ ++ if (ep->is_in == 1) { ++ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; ++ daintmsk.ep.in = 1 << ep->num; ++ } else { ++ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; ++ daintmsk.ep.out = 1 << ep->num; ++ } ++ ++ depctl.d32 = DWC_READ_REG32(addr); ++ ++ depctl.b.usbactep = 0; ++ ++ /* Update nextep_seq array and EPMSCNT in DCFG*/ ++ if (!(depctl.b.eptype & 1) && ep->is_in == 1) { // NP EP IN ++ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { ++ if (core_if->nextep_seq[i] == ep->num) ++ break; ++ } ++ core_if->nextep_seq[i] = core_if->nextep_seq[ep->num]; ++ if (core_if->first_in_nextep_seq == ep->num) ++ core_if->first_in_nextep_seq = i; ++ core_if->nextep_seq[ep->num] = 0xff; ++ depctl.b.nextep = 0; ++ dcfg.d32 = ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); ++ dcfg.b.epmscnt--; ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, ++ dcfg.d32); ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "%s first_in_nextep_seq= %2d; nextep_seq[]:\n", ++ __func__, core_if->first_in_nextep_seq); ++ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { ++ DWC_DEBUGPL(DBG_PCDV, "%2d\n", core_if->nextep_seq[i]); ++ } ++ } ++ ++ if (ep->is_in == 1) ++ depctl.b.txfnum = 0; ++ ++ if (core_if->dma_desc_enable) ++ depctl.b.epdis = 1; ++ ++ DWC_WRITE_REG32(addr, depctl.d32); ++ depctl.d32 = DWC_READ_REG32(addr); ++ if (core_if->dma_enable && ep->type == DWC_OTG_EP_TYPE_ISOC ++ && depctl.b.epena) { ++ depctl_data_t depctl = {.d32 = 0}; ++ if (ep->is_in) { ++ diepint_data_t diepint = {.d32 = 0}; ++ ++ depctl.b.snak = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ diepctl, depctl.d32); ++ do { ++ dwc_udelay(10); ++ diepint.d32 = ++ DWC_READ_REG32(&core_if-> ++ dev_if->in_ep_regs[ep->num]-> ++ diepint); ++ } while (!diepint.b.inepnakeff); ++ diepint.b.inepnakeff = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ diepint, diepint.d32); ++ depctl.d32 = 0; ++ depctl.b.epdis = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ diepctl, depctl.d32); ++ do { ++ dwc_udelay(10); ++ diepint.d32 = ++ DWC_READ_REG32(&core_if-> ++ dev_if->in_ep_regs[ep->num]-> ++ diepint); ++ } while (!diepint.b.epdisabled); ++ diepint.b.epdisabled = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ diepint, diepint.d32); ++ } else { ++ dctl_data_t dctl = {.d32 = 0}; ++ gintmsk_data_t gintsts = {.d32 = 0}; ++ doepint_data_t doepint = {.d32 = 0}; ++ dctl.b.sgoutnak = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ dctl, 0, dctl.d32); ++ do { ++ dwc_udelay(10); ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ } while (!gintsts.b.goutnakeff); ++ gintsts.d32 = 0; ++ gintsts.b.goutnakeff = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ depctl.d32 = 0; ++ depctl.b.epdis = 1; ++ depctl.b.snak = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]->doepctl, depctl.d32); ++ do ++ { ++ dwc_udelay(10); ++ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[ep->num]->doepint); ++ } while (!doepint.b.epdisabled); ++ ++ doepint.b.epdisabled = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]->doepint, doepint.d32); ++ ++ dctl.d32 = 0; ++ dctl.b.cgoutnak = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ } ++ } ++ ++ /* Disable the Interrupt for this EP */ ++ if (core_if->multiproc_int_enable) { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->deachintmsk, ++ daintmsk.d32, 0); ++ ++ if (ep->is_in == 1) { ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs-> ++ diepeachintmsk[ep->num], 0); ++ } else { ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs-> ++ doepeachintmsk[ep->num], 0); ++ } ++ } else { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->daintmsk, ++ daintmsk.d32, 0); ++ } ++ ++} ++ ++/** ++ * This function initializes dma descriptor chain. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ */ ++static void init_dma_desc_chain(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ uint32_t offset; ++ uint32_t xfer_est; ++ int i; ++ unsigned maxxfer_local, total_len; ++ ++ if (!ep->is_in && ep->type == DWC_OTG_EP_TYPE_INTR && ++ (ep->maxpacket%4)) { ++ maxxfer_local = ep->maxpacket; ++ total_len = ep->xfer_len; ++ } else { ++ maxxfer_local = ep->maxxfer; ++ total_len = ep->total_len; ++ } ++ ++ ep->desc_cnt = (total_len / maxxfer_local) + ++ ((total_len % maxxfer_local) ? 1 : 0); ++ ++ if (!ep->desc_cnt) ++ ep->desc_cnt = 1; ++ ++ if (ep->desc_cnt > MAX_DMA_DESC_CNT) ++ ep->desc_cnt = MAX_DMA_DESC_CNT; ++ ++ dma_desc = ep->desc_addr; ++ if (maxxfer_local == ep->maxpacket) { ++ if ((total_len % maxxfer_local) && ++ (total_len/maxxfer_local < MAX_DMA_DESC_CNT)) { ++ xfer_est = (ep->desc_cnt - 1) * maxxfer_local + ++ (total_len % maxxfer_local); ++ } else ++ xfer_est = ep->desc_cnt * maxxfer_local; ++ } else ++ xfer_est = total_len; ++ offset = 0; ++ for (i = 0; i < ep->desc_cnt; ++i) { ++ /** DMA Descriptor Setup */ ++ if (xfer_est > maxxfer_local) { ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 0; ++ dma_desc->status.b.ioc = 0; ++ dma_desc->status.b.sp = 0; ++ dma_desc->status.b.bytes = maxxfer_local; ++ dma_desc->buf = ep->dma_addr + offset; ++ dma_desc->status.b.sts = 0; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ xfer_est -= maxxfer_local; ++ offset += maxxfer_local; ++ } else { ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ if (ep->is_in) { ++ dma_desc->status.b.sp = ++ (xfer_est % ++ ep->maxpacket) ? 1 : ((ep-> ++ sent_zlp) ? 1 : 0); ++ dma_desc->status.b.bytes = xfer_est; ++ } else { ++ if (maxxfer_local == ep->maxpacket) ++ dma_desc->status.b.bytes = xfer_est; ++ else ++ dma_desc->status.b.bytes = ++ xfer_est + ((4 - (xfer_est & 0x3)) & 0x3); ++ } ++ ++ dma_desc->buf = ep->dma_addr + offset; ++ dma_desc->status.b.sts = 0; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ } ++ dma_desc++; ++ } ++} ++/** ++ * This function is called when to write ISOC data into appropriate dedicated ++ * periodic FIFO. ++ */ ++static int32_t write_isoc_tx_fifo(dwc_otg_core_if_t * core_if, dwc_ep_t * dwc_ep) ++{ ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dwc_otg_dev_in_ep_regs_t *ep_regs; ++ dtxfsts_data_t txstatus = {.d32 = 0 }; ++ uint32_t len = 0; ++ int epnum = dwc_ep->num; ++ int dwords; ++ ++ DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %d \n", epnum); ++ ++ ep_regs = core_if->dev_if->in_ep_regs[epnum]; ++ ++ len = dwc_ep->xfer_len - dwc_ep->xfer_count; ++ ++ if (len > dwc_ep->maxpacket) { ++ len = dwc_ep->maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ ++ /* While there is space in the queue and space in the FIFO and ++ * More data to tranfer, Write packets to the Tx FIFO */ ++ txstatus.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32); ++ ++ while (txstatus.b.txfspcavail > dwords && ++ dwc_ep->xfer_count < dwc_ep->xfer_len && dwc_ep->xfer_len != 0) { ++ /* Write the FIFO */ ++ dwc_otg_ep_write_packet(core_if, dwc_ep, 0); ++ ++ len = dwc_ep->xfer_len - dwc_ep->xfer_count; ++ if (len > dwc_ep->maxpacket) { ++ len = dwc_ep->maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ txstatus.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", epnum, ++ txstatus.d32); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, ++ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts)); ++ ++ return 1; ++} ++/** ++ * This function does the setup for a data transfer for an EP and ++ * starts the transfer. For an IN transfer, the packets will be ++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, ++ * the packets are unloaded from the Rx FIFO in the ISR. the ISR. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ */ ++ ++void dwc_otg_ep_start_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl; ++ deptsiz_data_t deptsiz; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__); ++ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d " ++ "xfer_buff=%p start_xfer_buff=%p, total_len = %d\n", ++ ep->num, (ep->is_in ? "IN" : "OUT"), ep->xfer_len, ++ ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff, ++ ep->total_len); ++ /* IN endpoint */ ++ if (ep->is_in == 1) { ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[ep->num]; ++ ++ gnptxsts_data_t gtxstatus; ++ ++ gtxstatus.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->gnptxsts); ++ ++ if (core_if->en_multiple_tx_fifo == 0 ++ && gtxstatus.b.nptxqspcavail == 0 && !core_if->dma_enable) { ++#ifdef DEBUG ++ DWC_PRINTF("TX Queue Full (0x%0x)\n", gtxstatus.d32); ++#endif ++ return; ++ } ++ ++ depctl.d32 = DWC_READ_REG32(&(in_regs->diepctl)); ++ deptsiz.d32 = DWC_READ_REG32(&(in_regs->dieptsiz)); ++ ++ if (ep->maxpacket > ep->maxxfer / MAX_PKT_CNT) ++ ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ? ++ ep->maxxfer : (ep->total_len - ep->xfer_len); ++ else ++ ep->xfer_len += (MAX_PKT_CNT * ep->maxpacket < (ep->total_len - ep->xfer_len)) ? ++ MAX_PKT_CNT * ep->maxpacket : (ep->total_len - ep->xfer_len); ++ ++ ++ /* Zero Length Packet? */ ++ if ((ep->xfer_len - ep->xfer_count) == 0) { ++ deptsiz.b.xfersize = 0; ++ deptsiz.b.pktcnt = 1; ++ } else { ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count; ++ deptsiz.b.pktcnt = ++ (ep->xfer_len - ep->xfer_count - 1 + ++ ep->maxpacket) / ep->maxpacket; ++ if (deptsiz.b.pktcnt > MAX_PKT_CNT) { ++ deptsiz.b.pktcnt = MAX_PKT_CNT; ++ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket; ++ } ++ if (ep->type == DWC_OTG_EP_TYPE_ISOC) ++ deptsiz.b.mc = deptsiz.b.pktcnt; ++ } ++ ++ /* Write the DMA register */ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable == 0) { ++ if (ep->type != DWC_OTG_EP_TYPE_ISOC) ++ deptsiz.b.mc = 1; ++ DWC_WRITE_REG32(&in_regs->dieptsiz, ++ deptsiz.d32); ++ DWC_WRITE_REG32(&(in_regs->diepdma), ++ (uint32_t) ep->dma_addr); ++ } else { ++#ifdef DWC_UTE_CFI ++ /* The descriptor chain should be already initialized by now */ ++ if (ep->buff_mode != BM_STANDARD) { ++ DWC_WRITE_REG32(&in_regs->diepdma, ++ ep->descs_dma_addr); ++ } else { ++#endif ++ init_dma_desc_chain(core_if, ep); ++ /** DIEPDMAn Register write */ ++ DWC_WRITE_REG32(&in_regs->diepdma, ++ ep->dma_desc_addr); ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ } ++ } else { ++ DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32); ++ if (ep->type != DWC_OTG_EP_TYPE_ISOC) { ++ /** ++ * Enable the Non-Periodic Tx FIFO empty interrupt, ++ * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode, ++ * the data will be written into the fifo by the ISR. ++ */ ++ if (core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.nptxfempty = 1; ++ DWC_MODIFY_REG32 ++ (&core_if->core_global_regs->gintmsk, ++ intr_mask.d32, intr_mask.d32); ++ } else { ++ /* Enable the Tx FIFO Empty Interrupt for this EP */ ++ if (ep->xfer_len > 0) { ++ uint32_t fifoemptymsk = 0; ++ fifoemptymsk = 1 << ep->num; ++ DWC_MODIFY_REG32 ++ (&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk, ++ 0, fifoemptymsk); ++ ++ } ++ } ++ } else { ++ write_isoc_tx_fifo(core_if, ep); ++ } ++ } ++ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) ++ depctl.b.nextep = core_if->nextep_seq[ep->num]; ++ ++ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ dsts_data_t dsts = {.d32 = 0}; ++ if (ep->bInterval == 1) { ++ dsts.d32 = ++ DWC_READ_REG32(&core_if->dev_if-> ++ dev_global_regs->dsts); ++ ep->frame_num = dsts.b.soffn + ep->bInterval; ++ if (ep->frame_num > 0x3FFF) { ++ ep->frm_overrun = 1; ++ ep->frame_num &= 0x3FFF; ++ } else ++ ep->frm_overrun = 0; ++ if (ep->frame_num & 0x1) { ++ depctl.b.setd1pid = 1; ++ } else { ++ depctl.b.setd0pid = 1; ++ } ++ } ++ } ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32); ++ ++ } else { ++ /* OUT endpoint */ ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[ep->num]; ++ ++ depctl.d32 = DWC_READ_REG32(&(out_regs->doepctl)); ++ deptsiz.d32 = DWC_READ_REG32(&(out_regs->doeptsiz)); ++ ++ if (!core_if->dma_desc_enable) { ++ if (ep->maxpacket > ep->maxxfer / MAX_PKT_CNT) ++ ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ? ++ ep->maxxfer : (ep->total_len - ep->xfer_len); ++ else ++ ep->xfer_len += (MAX_PKT_CNT * ep->maxpacket < (ep->total_len ++ - ep->xfer_len)) ? MAX_PKT_CNT * ep->maxpacket : (ep->total_len - ep->xfer_len); ++ } ++ ++ /* Program the transfer size and packet count as follows: ++ * ++ * pktcnt = N ++ * xfersize = N * maxpacket ++ */ ++ if ((ep->xfer_len - ep->xfer_count) == 0) { ++ /* Zero Length Packet */ ++ deptsiz.b.xfersize = ep->maxpacket; ++ deptsiz.b.pktcnt = 1; ++ } else { ++ deptsiz.b.pktcnt = ++ (ep->xfer_len - ep->xfer_count + ++ (ep->maxpacket - 1)) / ep->maxpacket; ++ if (deptsiz.b.pktcnt > MAX_PKT_CNT) { ++ deptsiz.b.pktcnt = MAX_PKT_CNT; ++ } ++ if (!core_if->dma_desc_enable) { ++ ep->xfer_len = ++ deptsiz.b.pktcnt * ep->maxpacket + ep->xfer_count; ++ } ++ deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count; ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n", ++ ep->num, deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ ++ if (core_if->dma_enable) { ++ if (!core_if->dma_desc_enable) { ++ DWC_WRITE_REG32(&out_regs->doeptsiz, ++ deptsiz.d32); ++ ++ DWC_WRITE_REG32(&(out_regs->doepdma), ++ (uint32_t) ep->dma_addr); ++ } else { ++#ifdef DWC_UTE_CFI ++ /* The descriptor chain should be already initialized by now */ ++ if (ep->buff_mode != BM_STANDARD) { ++ DWC_WRITE_REG32(&out_regs->doepdma, ++ ep->descs_dma_addr); ++ } else { ++#endif ++ /** This is used for interrupt out transfers*/ ++ if (!ep->xfer_len) ++ ep->xfer_len = ep->total_len; ++ init_dma_desc_chain(core_if, ep); ++ ++ if (core_if->core_params->dev_out_nak) { ++ if (ep->type == DWC_OTG_EP_TYPE_BULK) { ++ deptsiz.b.pktcnt = (ep->total_len + ++ (ep->maxpacket - 1)) / ep->maxpacket; ++ deptsiz.b.xfersize = ep->total_len; ++ /* Remember initial value of doeptsiz */ ++ core_if->start_doeptsiz_val[ep->num] = deptsiz.d32; ++ DWC_WRITE_REG32(&out_regs->doeptsiz, ++ deptsiz.d32); ++ } ++ } ++ /** DOEPDMAn Register write */ ++ DWC_WRITE_REG32(&out_regs->doepdma, ++ ep->dma_desc_addr); ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ } ++ } else { ++ DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32); ++ } ++ ++ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ dsts_data_t dsts = {.d32 = 0}; ++ if (ep->bInterval == 1) { ++ dsts.d32 = ++ DWC_READ_REG32(&core_if->dev_if-> ++ dev_global_regs->dsts); ++ ep->frame_num = dsts.b.soffn + ep->bInterval; ++ if (ep->frame_num > 0x3FFF) { ++ ep->frm_overrun = 1; ++ ep->frame_num &= 0x3FFF; ++ } else ++ ep->frm_overrun = 0; ++ ++ if (ep->frame_num & 0x1) { ++ depctl.b.setd1pid = 1; ++ } else { ++ depctl.b.setd0pid = 1; ++ } ++ } ++ } ++ ++ /* EP enable */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ ++ DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32); ++ ++ DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n", ++ DWC_READ_REG32(&out_regs->doepctl), ++ DWC_READ_REG32(&out_regs->doeptsiz)); ++ DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n", ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs-> ++ daintmsk), ++ DWC_READ_REG32(&core_if->core_global_regs-> ++ gintmsk)); ++ ++ /* Timer is scheduling only for out bulk transfers for ++ * "Device DDMA OUT NAK Enhancement" feature to inform user ++ * about received data payload in case of timeout ++ */ ++ if (core_if->core_params->dev_out_nak) { ++ if (ep->type == DWC_OTG_EP_TYPE_BULK) { ++ core_if->ep_xfer_info[ep->num].core_if = core_if; ++ core_if->ep_xfer_info[ep->num].ep = ep; ++ core_if->ep_xfer_info[ep->num].state = 1; ++ ++ /* Start a timer for this transfer. */ ++ DWC_TIMER_SCHEDULE(core_if->ep_xfer_timer[ep->num], 10000); ++ } ++ } ++ } ++} ++ ++/** ++ * This function setup a zero length transfer in Buffer DMA and ++ * Slave modes for usb requests with zero field set ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ ++ depctl_data_t depctl; ++ deptsiz_data_t deptsiz; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__); ++ DWC_PRINTF("zero length transfer is called\n"); ++ ++ /* IN endpoint */ ++ if (ep->is_in == 1) { ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[ep->num]; ++ ++ depctl.d32 = DWC_READ_REG32(&(in_regs->diepctl)); ++ deptsiz.d32 = DWC_READ_REG32(&(in_regs->dieptsiz)); ++ ++ deptsiz.b.xfersize = 0; ++ deptsiz.b.pktcnt = 1; ++ ++ /* Write the DMA register */ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable == 0) { ++ deptsiz.b.mc = 1; ++ DWC_WRITE_REG32(&in_regs->dieptsiz, ++ deptsiz.d32); ++ DWC_WRITE_REG32(&(in_regs->diepdma), ++ (uint32_t) ep->dma_addr); ++ } ++ } else { ++ DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32); ++ /** ++ * Enable the Non-Periodic Tx FIFO empty interrupt, ++ * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode, ++ * the data will be written into the fifo by the ISR. ++ */ ++ if (core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.nptxfempty = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs->gintmsk, ++ intr_mask.d32, intr_mask.d32); ++ } else { ++ /* Enable the Tx FIFO Empty Interrupt for this EP */ ++ if (ep->xfer_len > 0) { ++ uint32_t fifoemptymsk = 0; ++ fifoemptymsk = 1 << ep->num; ++ DWC_MODIFY_REG32(&core_if-> ++ dev_if->dev_global_regs->dtknqr4_fifoemptymsk, ++ 0, fifoemptymsk); ++ } ++ } ++ } ++ ++ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) ++ depctl.b.nextep = core_if->nextep_seq[ep->num]; ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32); ++ ++ } else { ++ /* OUT endpoint */ ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[ep->num]; ++ ++ depctl.d32 = DWC_READ_REG32(&(out_regs->doepctl)); ++ deptsiz.d32 = DWC_READ_REG32(&(out_regs->doeptsiz)); ++ ++ /* Zero Length Packet */ ++ deptsiz.b.xfersize = ep->maxpacket; ++ deptsiz.b.pktcnt = 1; ++ ++ if (core_if->dma_enable) { ++ if (!core_if->dma_desc_enable) { ++ DWC_WRITE_REG32(&out_regs->doeptsiz, ++ deptsiz.d32); ++ ++ DWC_WRITE_REG32(&(out_regs->doepdma), ++ (uint32_t) ep->dma_addr); ++ } ++ } else { ++ DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32); ++ } ++ ++ /* EP enable */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ ++ DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32); ++ ++ } ++} ++ ++/** ++ * This function does the setup for a data transfer for EP0 and starts ++ * the transfer. For an IN transfer, the packets will be loaded into ++ * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are ++ * unloaded from the Rx FIFO in the ISR. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP0 data. ++ */ ++void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl; ++ deptsiz0_data_t deptsiz; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ ++ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d " ++ "xfer_buff=%p start_xfer_buff=%p \n", ++ ep->num, (ep->is_in ? "IN" : "OUT"), ep->xfer_len, ++ ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff); ++ ++ ep->total_len = ep->xfer_len; ++ ++ /* IN endpoint */ ++ if (ep->is_in == 1) { ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[0]; ++ ++ gnptxsts_data_t gtxstatus; ++ ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { ++ depctl.d32 = DWC_READ_REG32(&in_regs->diepctl); ++ if (depctl.b.epena) ++ return; ++ } ++ ++ gtxstatus.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->gnptxsts); ++ ++ /* If dedicated FIFO every time flush fifo before enable ep*/ ++ if (core_if->en_multiple_tx_fifo && core_if->snpsid >= OTG_CORE_REV_3_00a) ++ dwc_otg_flush_tx_fifo(core_if, ep->tx_fifo_num); ++ ++ if (core_if->en_multiple_tx_fifo == 0 ++ && gtxstatus.b.nptxqspcavail == 0 ++ && !core_if->dma_enable) { ++#ifdef DEBUG ++ deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz); ++ DWC_DEBUGPL(DBG_PCD, "DIEPCTL0=%0x\n", ++ DWC_READ_REG32(&in_regs->diepctl)); ++ DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n", ++ deptsiz.d32, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ DWC_PRINTF("TX Queue or FIFO Full (0x%0x)\n", ++ gtxstatus.d32); ++#endif ++ return; ++ } ++ ++ depctl.d32 = DWC_READ_REG32(&in_regs->diepctl); ++ deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz); ++ ++ /* Zero Length Packet? */ ++ if (ep->xfer_len == 0) { ++ deptsiz.b.xfersize = 0; ++ deptsiz.b.pktcnt = 1; ++ } else { ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ if (ep->xfer_len > ep->maxpacket) { ++ ep->xfer_len = ep->maxpacket; ++ deptsiz.b.xfersize = ep->maxpacket; ++ } else { ++ deptsiz.b.xfersize = ep->xfer_len; ++ } ++ deptsiz.b.pktcnt = 1; ++ ++ } ++ DWC_DEBUGPL(DBG_PCDV, ++ "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", ++ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt, ++ deptsiz.d32); ++ ++ /* Write the DMA register */ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable == 0) { ++ DWC_WRITE_REG32(&in_regs->dieptsiz, ++ deptsiz.d32); ++ ++ DWC_WRITE_REG32(&(in_regs->diepdma), ++ (uint32_t) ep->dma_addr); ++ } else { ++ dma_desc = core_if->dev_if->in_desc_addr; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.sp = ++ (ep->xfer_len == ep->maxpacket) ? 0 : 1; ++ dma_desc->status.b.bytes = ep->xfer_len; ++ dma_desc->buf = ep->dma_addr; ++ dma_desc->status.b.sts = 0; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DIEPDMA0 Register write */ ++ DWC_WRITE_REG32(&in_regs->diepdma, ++ core_if-> ++ dev_if->dma_in_desc_addr); ++ } ++ } else { ++ DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32); ++ } ++ ++ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) ++ depctl.b.nextep = core_if->nextep_seq[ep->num]; ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32); ++ ++ /** ++ * Enable the Non-Periodic Tx FIFO empty interrupt, the ++ * data will be written into the fifo by the ISR. ++ */ ++ if (!core_if->dma_enable) { ++ if (core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.nptxfempty = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs->gintmsk, ++ intr_mask.d32, intr_mask.d32); ++ } else { ++ /* Enable the Tx FIFO Empty Interrupt for this EP */ ++ if (ep->xfer_len > 0) { ++ uint32_t fifoemptymsk = 0; ++ fifoemptymsk |= 1 << ep->num; ++ DWC_MODIFY_REG32(&core_if-> ++ dev_if->dev_global_regs->dtknqr4_fifoemptymsk, ++ 0, fifoemptymsk); ++ } ++ } ++ } ++ } else { ++ /* OUT endpoint */ ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[0]; ++ ++ depctl.d32 = DWC_READ_REG32(&out_regs->doepctl); ++ deptsiz.d32 = DWC_READ_REG32(&out_regs->doeptsiz); ++ ++ /* Program the transfer size and packet count as follows: ++ * xfersize = N * (maxpacket + 4 - (maxpacket % 4)) ++ * pktcnt = N */ ++ /* Zero Length Packet */ ++ deptsiz.b.xfersize = ep->maxpacket; ++ deptsiz.b.pktcnt = 1; ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) ++ deptsiz.b.supcnt = 3; ++ ++ DWC_DEBUGPL(DBG_PCDV, "len=%d xfersize=%d pktcnt=%d\n", ++ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ ++ if (core_if->dma_enable) { ++ if (!core_if->dma_desc_enable) { ++ DWC_WRITE_REG32(&out_regs->doeptsiz, ++ deptsiz.d32); ++ ++ DWC_WRITE_REG32(&(out_regs->doepdma), ++ (uint32_t) ep->dma_addr); ++ } else { ++ dma_desc = core_if->dev_if->out_desc_addr; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { ++ dma_desc->status.b.mtrf = 0; ++ dma_desc->status.b.sr = 0; ++ } ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.bytes = ep->maxpacket; ++ dma_desc->buf = ep->dma_addr; ++ dma_desc->status.b.sts = 0; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DOEPDMA0 Register write */ ++ DWC_WRITE_REG32(&out_regs->doepdma, ++ core_if->dev_if-> ++ dma_out_desc_addr); ++ } ++ } else { ++ DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32); ++ } ++ ++ /* EP enable */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ DWC_WRITE_REG32(&(out_regs->doepctl), depctl.d32); ++ } ++} ++ ++/** ++ * This function continues control IN transfers started by ++ * dwc_otg_ep0_start_transfer, when the transfer does not fit in a ++ * single packet. NOTE: The DIEPCTL0/DOEPCTL0 registers only have one ++ * bit for the packet count. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP0 data. ++ */ ++void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl; ++ deptsiz0_data_t deptsiz; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ ++ if (ep->is_in == 1) { ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[0]; ++ gnptxsts_data_t tx_status = {.d32 = 0 }; ++ ++ tx_status.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->gnptxsts); ++ /** @todo Should there be check for room in the Tx ++ * Status Queue. If not remove the code above this comment. */ ++ ++ depctl.d32 = DWC_READ_REG32(&in_regs->diepctl); ++ deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz); ++ ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ ++ if (core_if->dma_desc_enable == 0) { ++ deptsiz.b.xfersize = ++ (ep->total_len - ep->xfer_count) > ++ ep->maxpacket ? ep->maxpacket : (ep->total_len - ++ ep->xfer_count); ++ deptsiz.b.pktcnt = 1; ++ if (core_if->dma_enable == 0) { ++ ep->xfer_len += deptsiz.b.xfersize; ++ } else { ++ ep->xfer_len = deptsiz.b.xfersize; ++ } ++ DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32); ++ } else { ++ ep->xfer_len = ++ (ep->total_len - ep->xfer_count) > ++ ep->maxpacket ? ep->maxpacket : (ep->total_len - ++ ep->xfer_count); ++ ++ dma_desc = core_if->dev_if->in_desc_addr; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.sp = ++ (ep->xfer_len == ep->maxpacket) ? 0 : 1; ++ dma_desc->status.b.bytes = ep->xfer_len; ++ dma_desc->buf = ep->dma_addr; ++ dma_desc->status.b.sts = 0; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DIEPDMA0 Register write */ ++ DWC_WRITE_REG32(&in_regs->diepdma, ++ core_if->dev_if->dma_in_desc_addr); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", ++ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt, ++ deptsiz.d32); ++ ++ /* Write the DMA register */ ++ if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) { ++ if (core_if->dma_desc_enable == 0) ++ DWC_WRITE_REG32(&(in_regs->diepdma), ++ (uint32_t) ep->dma_addr); ++ } ++ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) ++ depctl.b.nextep = core_if->nextep_seq[ep->num]; ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32); ++ ++ /** ++ * Enable the Non-Periodic Tx FIFO empty interrupt, the ++ * data will be written into the fifo by the ISR. ++ */ ++ if (!core_if->dma_enable) { ++ if (core_if->en_multiple_tx_fifo == 0) { ++ /* First clear it from GINTSTS */ ++ intr_mask.b.nptxfempty = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs->gintmsk, ++ intr_mask.d32, intr_mask.d32); ++ ++ } else { ++ /* Enable the Tx FIFO Empty Interrupt for this EP */ ++ if (ep->xfer_len > 0) { ++ uint32_t fifoemptymsk = 0; ++ fifoemptymsk |= 1 << ep->num; ++ DWC_MODIFY_REG32(&core_if-> ++ dev_if->dev_global_regs->dtknqr4_fifoemptymsk, ++ 0, fifoemptymsk); ++ } ++ } ++ } ++ } else { ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[0]; ++ ++ depctl.d32 = DWC_READ_REG32(&out_regs->doepctl); ++ deptsiz.d32 = DWC_READ_REG32(&out_regs->doeptsiz); ++ ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ deptsiz.b.xfersize = ep->maxpacket; ++ deptsiz.b.pktcnt = 1; ++ ++ if (core_if->dma_desc_enable == 0) { ++ DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32); ++ } else { ++ dma_desc = core_if->dev_if->out_desc_addr; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.bytes = ep->maxpacket; ++ dma_desc->buf = ep->dma_addr; ++ dma_desc->status.b.sts = 0; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DOEPDMA0 Register write */ ++ DWC_WRITE_REG32(&out_regs->doepdma, ++ core_if->dev_if->dma_out_desc_addr); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", ++ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt, ++ deptsiz.d32); ++ ++ /* Write the DMA register */ ++ if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) { ++ if (core_if->dma_desc_enable == 0) ++ DWC_WRITE_REG32(&(out_regs->doepdma), ++ (uint32_t) ep->dma_addr); ++ ++ } ++ ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32); ++ ++ } ++} ++ ++#ifdef DEBUG ++void dump_msg(const u8 * buf, unsigned int length) ++{ ++ unsigned int start, num, i; ++ char line[52], *p; ++ ++ if (length >= 512) ++ return; ++ start = 0; ++ while (length > 0) { ++ num = length < 16u ? length : 16u; ++ p = line; ++ for (i = 0; i < num; ++i) { ++ if (i == 8) ++ *p++ = ' '; ++ DWC_SPRINTF(p, " %02x", buf[i]); ++ p += 3; ++ } ++ *p = 0; ++ DWC_PRINTF("%6x: %s\n", start, line); ++ buf += num; ++ start += num; ++ length -= num; ++ } ++} ++#else ++static inline void dump_msg(const u8 * buf, unsigned int length) ++{ ++} ++#endif ++ ++/** ++ * This function writes a packet into the Tx FIFO associated with the ++ * EP. For non-periodic EPs the non-periodic Tx FIFO is written. For ++ * periodic EPs the periodic Tx FIFO associated with the EP is written ++ * with all packets for the next micro-frame. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to write packet for. ++ * @param dma Indicates if DMA is being used. ++ */ ++void dwc_otg_ep_write_packet(dwc_otg_core_if_t * core_if, dwc_ep_t * ep, ++ int dma) ++{ ++ /** ++ * The buffer is padded to DWORD on a per packet basis in ++ * slave/dma mode if the MPS is not DWORD aligned. The last ++ * packet, if short, is also padded to a multiple of DWORD. ++ * ++ * ep->xfer_buff always starts DWORD aligned in memory and is a ++ * multiple of DWORD in length ++ * ++ * ep->xfer_len can be any number of bytes ++ * ++ * ep->xfer_count is a multiple of ep->maxpacket until the last ++ * packet ++ * ++ * FIFO access is DWORD */ ++ ++ uint32_t i; ++ uint32_t byte_count; ++ uint32_t dword_count; ++ uint32_t *fifo; ++ uint32_t *data_buff = (uint32_t *) ep->xfer_buff; ++ ++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, core_if, ++ ep); ++ if (ep->xfer_count >= ep->xfer_len) { ++ DWC_WARN("%s() No data for EP%d!!!\n", __func__, ep->num); ++ return; ++ } ++ ++ /* Find the byte length of the packet either short packet or MPS */ ++ if ((ep->xfer_len - ep->xfer_count) < ep->maxpacket) { ++ byte_count = ep->xfer_len - ep->xfer_count; ++ } else { ++ byte_count = ep->maxpacket; ++ } ++ ++ /* Find the DWORD length, padded by extra bytes as neccessary if MPS ++ * is not a multiple of DWORD */ ++ dword_count = (byte_count + 3) / 4; ++ ++#ifdef VERBOSE ++ dump_msg(ep->xfer_buff, byte_count); ++#endif ++ ++ /**@todo NGS Where are the Periodic Tx FIFO addresses ++ * intialized? What should this be? */ ++ ++ fifo = core_if->data_fifo[ep->num]; ++ ++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n", ++ fifo, data_buff, *data_buff, byte_count); ++ ++ if (!dma) { ++ for (i = 0; i < dword_count; i++, data_buff++) { ++ DWC_WRITE_REG32(fifo, *data_buff); ++ } ++ } ++ ++ ep->xfer_count += byte_count; ++ ep->xfer_buff += byte_count; ++ ep->dma_addr += byte_count; ++} ++ ++/** ++ * Set the EP STALL. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to set the stall on. ++ */ ++void dwc_otg_ep_set_stall(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl; ++ volatile uint32_t *depctl_addr; ++ ++ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num, ++ (ep->is_in ? "IN" : "OUT")); ++ ++ if (ep->is_in == 1) { ++ depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl); ++ depctl.d32 = DWC_READ_REG32(depctl_addr); ++ ++ /* set the disable and stall bits */ ++ if (depctl.b.epena) { ++ depctl.b.epdis = 1; ++ } ++ depctl.b.stall = 1; ++ DWC_WRITE_REG32(depctl_addr, depctl.d32); ++ } else { ++ depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl); ++ depctl.d32 = DWC_READ_REG32(depctl_addr); ++ ++ /* set the stall bit */ ++ depctl.b.stall = 1; ++ DWC_WRITE_REG32(depctl_addr, depctl.d32); ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "DEPCTL=%0x\n", DWC_READ_REG32(depctl_addr)); ++ ++ return; ++} ++ ++/** ++ * Clear the EP STALL. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to clear stall from. ++ */ ++void dwc_otg_ep_clear_stall(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl; ++ volatile uint32_t *depctl_addr; ++ ++ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num, ++ (ep->is_in ? "IN" : "OUT")); ++ ++ if (ep->is_in == 1) { ++ depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl); ++ } else { ++ depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl); ++ } ++ ++ depctl.d32 = DWC_READ_REG32(depctl_addr); ++ ++ /* clear the stall bits */ ++ depctl.b.stall = 0; ++ ++ /* ++ * USB Spec 9.4.5: For endpoints using data toggle, regardless ++ * of whether an endpoint has the Halt feature set, a ++ * ClearFeature(ENDPOINT_HALT) request always results in the ++ * data toggle being reinitialized to DATA0. ++ */ ++ if (ep->type == DWC_OTG_EP_TYPE_INTR || ++ ep->type == DWC_OTG_EP_TYPE_BULK) { ++ depctl.b.setd0pid = 1; /* DATA0 */ ++ } ++ ++ DWC_WRITE_REG32(depctl_addr, depctl.d32); ++ DWC_DEBUGPL(DBG_PCD, "DEPCTL=%0x\n", DWC_READ_REG32(depctl_addr)); ++ return; ++} ++ ++/** ++ * This function reads a packet from the Rx FIFO into the destination ++ * buffer. To read SETUP data use dwc_otg_read_setup_packet. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dest Destination buffer for the packet. ++ * @param bytes Number of bytes to copy to the destination. ++ */ ++void dwc_otg_read_packet(dwc_otg_core_if_t * core_if, ++ uint8_t * dest, uint16_t bytes) ++{ ++ int i; ++ int word_count = (bytes + 3) / 4; ++ ++ volatile uint32_t *fifo = core_if->data_fifo[0]; ++ uint32_t *data_buff = (uint32_t *) dest; ++ ++ /** ++ * @todo Account for the case where _dest is not dword aligned. This ++ * requires reading data from the FIFO into a uint32_t temp buffer, ++ * then moving it into the data buffer. ++ */ ++ ++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__, ++ core_if, dest, bytes); ++ ++ for (i = 0; i < word_count; i++, data_buff++) { ++ *data_buff = DWC_READ_REG32(fifo); ++ } ++ ++ return; ++} ++ ++/** ++ * This functions reads the device registers and prints them ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_dump_dev_registers(dwc_otg_core_if_t * core_if) ++{ ++ int i; ++ volatile uint32_t *addr; ++ ++ DWC_PRINTF("Device Global Registers\n"); ++ addr = &core_if->dev_if->dev_global_regs->dcfg; ++ DWC_PRINTF("DCFG @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->dctl; ++ DWC_PRINTF("DCTL @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->dsts; ++ DWC_PRINTF("DSTS @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->diepmsk; ++ DWC_PRINTF("DIEPMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->doepmsk; ++ DWC_PRINTF("DOEPMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->daint; ++ DWC_PRINTF("DAINT @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->daintmsk; ++ DWC_PRINTF("DAINTMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->dtknqr1; ++ DWC_PRINTF("DTKNQR1 @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ if (core_if->hwcfg2.b.dev_token_q_depth > 6) { ++ addr = &core_if->dev_if->dev_global_regs->dtknqr2; ++ DWC_PRINTF("DTKNQR2 @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ } ++ ++ addr = &core_if->dev_if->dev_global_regs->dvbusdis; ++ DWC_PRINTF("DVBUSID @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ ++ addr = &core_if->dev_if->dev_global_regs->dvbuspulse; ++ DWC_PRINTF("DVBUSPULSE @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ ++ addr = &core_if->dev_if->dev_global_regs->dtknqr3_dthrctl; ++ DWC_PRINTF("DTKNQR3_DTHRCTL @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ ++ if (core_if->hwcfg2.b.dev_token_q_depth > 22) { ++ addr = &core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk; ++ DWC_PRINTF("DTKNQR4 @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ } ++ ++ addr = &core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk; ++ DWC_PRINTF("FIFOEMPMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ ++ if (core_if->hwcfg2.b.multi_proc_int) { ++ ++ addr = &core_if->dev_if->dev_global_regs->deachint; ++ DWC_PRINTF("DEACHINT @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->deachintmsk; ++ DWC_PRINTF("DEACHINTMSK @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ ++ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { ++ addr = ++ &core_if->dev_if-> ++ dev_global_regs->diepeachintmsk[i]; ++ DWC_PRINTF("DIEPEACHINTMSK[%d] @0x%08lX : 0x%08X\n", ++ i, (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ } ++ ++ for (i = 0; i <= core_if->dev_if->num_out_eps; i++) { ++ addr = ++ &core_if->dev_if-> ++ dev_global_regs->doepeachintmsk[i]; ++ DWC_PRINTF("DOEPEACHINTMSK[%d] @0x%08lX : 0x%08X\n", ++ i, (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ } ++ } ++ ++ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { ++ DWC_PRINTF("Device IN EP %d Registers\n", i); ++ addr = &core_if->dev_if->in_ep_regs[i]->diepctl; ++ DWC_PRINTF("DIEPCTL @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->in_ep_regs[i]->diepint; ++ DWC_PRINTF("DIEPINT @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->in_ep_regs[i]->dieptsiz; ++ DWC_PRINTF("DIETSIZ @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->in_ep_regs[i]->diepdma; ++ DWC_PRINTF("DIEPDMA @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->in_ep_regs[i]->dtxfsts; ++ DWC_PRINTF("DTXFSTS @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->in_ep_regs[i]->diepdmab; ++ DWC_PRINTF("DIEPDMAB @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, 0 /*DWC_READ_REG32(addr) */ ); ++ } ++ ++ for (i = 0; i <= core_if->dev_if->num_out_eps; i++) { ++ DWC_PRINTF("Device OUT EP %d Registers\n", i); ++ addr = &core_if->dev_if->out_ep_regs[i]->doepctl; ++ DWC_PRINTF("DOEPCTL @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->out_ep_regs[i]->doepint; ++ DWC_PRINTF("DOEPINT @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->out_ep_regs[i]->doeptsiz; ++ DWC_PRINTF("DOETSIZ @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->out_ep_regs[i]->doepdma; ++ DWC_PRINTF("DOEPDMA @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ if (core_if->dma_enable) { /* Don't access this register in SLAVE mode */ ++ addr = &core_if->dev_if->out_ep_regs[i]->doepdmab; ++ DWC_PRINTF("DOEPDMAB @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ } ++ ++ } ++} ++ ++/** ++ * This functions reads the SPRAM and prints its content ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_dump_spram(dwc_otg_core_if_t * core_if) ++{ ++ volatile uint8_t *addr, *start_addr, *end_addr; ++ ++ DWC_PRINTF("SPRAM Data:\n"); ++ start_addr = (void *)core_if->core_global_regs; ++ DWC_PRINTF("Base Address: 0x%8lX\n", (unsigned long)start_addr); ++ start_addr += 0x00028000; ++ end_addr = (void *)core_if->core_global_regs; ++ end_addr += 0x000280e0; ++ ++ for (addr = start_addr; addr < end_addr; addr += 16) { ++ DWC_PRINTF ++ ("0x%8lX:\t%2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X\n", ++ (unsigned long)addr, addr[0], addr[1], addr[2], addr[3], ++ addr[4], addr[5], addr[6], addr[7], addr[8], addr[9], ++ addr[10], addr[11], addr[12], addr[13], addr[14], addr[15] ++ ); ++ } ++ ++ return; ++} ++ ++/** ++ * This function reads the host registers and prints them ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_dump_host_registers(dwc_otg_core_if_t * core_if) ++{ ++ int i; ++ volatile uint32_t *addr; ++ ++ DWC_PRINTF("Host Global Registers\n"); ++ addr = &core_if->host_if->host_global_regs->hcfg; ++ DWC_PRINTF("HCFG @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->host_global_regs->hfir; ++ DWC_PRINTF("HFIR @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->host_global_regs->hfnum; ++ DWC_PRINTF("HFNUM @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->host_global_regs->hptxsts; ++ DWC_PRINTF("HPTXSTS @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->host_global_regs->haint; ++ DWC_PRINTF("HAINT @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->host_global_regs->haintmsk; ++ DWC_PRINTF("HAINTMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ if (core_if->dma_desc_enable) { ++ addr = &core_if->host_if->host_global_regs->hflbaddr; ++ DWC_PRINTF("HFLBADDR @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ } ++ ++ addr = core_if->host_if->hprt0; ++ DWC_PRINTF("HPRT0 @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ ++ for (i = 0; i < core_if->core_params->host_channels; i++) { ++ DWC_PRINTF("Host Channel %d Specific Registers\n", i); ++ addr = &core_if->host_if->hc_regs[i]->hcchar; ++ DWC_PRINTF("HCCHAR @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->hc_regs[i]->hcsplt; ++ DWC_PRINTF("HCSPLT @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->hc_regs[i]->hcint; ++ DWC_PRINTF("HCINT @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->hc_regs[i]->hcintmsk; ++ DWC_PRINTF("HCINTMSK @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->hc_regs[i]->hctsiz; ++ DWC_PRINTF("HCTSIZ @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->hc_regs[i]->hcdma; ++ DWC_PRINTF("HCDMA @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ if (core_if->dma_desc_enable) { ++ addr = &core_if->host_if->hc_regs[i]->hcdmab; ++ DWC_PRINTF("HCDMAB @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ } ++ ++ } ++ return; ++} ++ ++/** ++ * This function reads the core global registers and prints them ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_dump_global_registers(dwc_otg_core_if_t * core_if) ++{ ++ int i, ep_num; ++ volatile uint32_t *addr; ++ char *txfsiz; ++ ++ DWC_PRINTF("Core Global Registers\n"); ++ addr = &core_if->core_global_regs->gotgctl; ++ DWC_PRINTF("GOTGCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gotgint; ++ DWC_PRINTF("GOTGINT @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gahbcfg; ++ DWC_PRINTF("GAHBCFG @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gusbcfg; ++ DWC_PRINTF("GUSBCFG @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->grstctl; ++ DWC_PRINTF("GRSTCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gintsts; ++ DWC_PRINTF("GINTSTS @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gintmsk; ++ DWC_PRINTF("GINTMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->grxstsr; ++ DWC_PRINTF("GRXSTSR @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->grxfsiz; ++ DWC_PRINTF("GRXFSIZ @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gnptxfsiz; ++ DWC_PRINTF("GNPTXFSIZ @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gnptxsts; ++ DWC_PRINTF("GNPTXSTS @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gi2cctl; ++ DWC_PRINTF("GI2CCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gpvndctl; ++ DWC_PRINTF("GPVNDCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->ggpio; ++ DWC_PRINTF("GGPIO @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->guid; ++ DWC_PRINTF("GUID @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gsnpsid; ++ DWC_PRINTF("GSNPSID @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->ghwcfg1; ++ DWC_PRINTF("GHWCFG1 @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->ghwcfg2; ++ DWC_PRINTF("GHWCFG2 @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->ghwcfg3; ++ DWC_PRINTF("GHWCFG3 @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->ghwcfg4; ++ DWC_PRINTF("GHWCFG4 @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->glpmcfg; ++ DWC_PRINTF("GLPMCFG @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gpwrdn; ++ DWC_PRINTF("GPWRDN @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gdfifocfg; ++ DWC_PRINTF("GDFIFOCFG @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->adpctl; ++ DWC_PRINTF("ADPCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ dwc_otg_adp_read_reg(core_if)); ++ addr = &core_if->core_global_regs->hptxfsiz; ++ DWC_PRINTF("HPTXFSIZ @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ ++ if (core_if->en_multiple_tx_fifo == 0) { ++ ep_num = core_if->hwcfg4.b.num_dev_perio_in_ep; ++ txfsiz = "DPTXFSIZ"; ++ } else { ++ ep_num = core_if->hwcfg4.b.num_in_eps; ++ txfsiz = "DIENPTXF"; ++ } ++ for (i = 0; i < ep_num; i++) { ++ addr = &core_if->core_global_regs->dtxfsiz[i]; ++ DWC_PRINTF("%s[%d] @0x%08lX : 0x%08X\n", txfsiz, i + 1, ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ } ++ addr = core_if->pcgcctl; ++ DWC_PRINTF("PCGCCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++} ++ ++/** ++ * Flush a Tx FIFO. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param num Tx FIFO to flush. ++ */ ++void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t * core_if, const int num) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ volatile grstctl_t greset = {.d32 = 0 }; ++ int count = 0; ++ ++ DWC_DEBUGPL((DBG_CIL | DBG_PCDV), "Flush Tx FIFO %d\n", num); ++ ++ greset.b.txfflsh = 1; ++ greset.b.txfnum = num; ++ DWC_WRITE_REG32(&global_regs->grstctl, greset.d32); ++ ++ do { ++ greset.d32 = DWC_READ_REG32(&global_regs->grstctl); ++ if (++count > 10000) { ++ DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n", ++ __func__, greset.d32, ++ DWC_READ_REG32(&global_regs->gnptxsts)); ++ break; ++ } ++ dwc_udelay(1); ++ } while (greset.b.txfflsh == 1); ++ ++ /* Wait for 3 PHY Clocks */ ++ dwc_udelay(1); ++} ++ ++/** ++ * Flush Rx FIFO. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ volatile grstctl_t greset = {.d32 = 0 }; ++ int count = 0; ++ ++ DWC_DEBUGPL((DBG_CIL | DBG_PCDV), "%s\n", __func__); ++ /* ++ * ++ */ ++ greset.b.rxfflsh = 1; ++ DWC_WRITE_REG32(&global_regs->grstctl, greset.d32); ++ ++ do { ++ greset.d32 = DWC_READ_REG32(&global_regs->grstctl); ++ if (++count > 10000) { ++ DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__, ++ greset.d32); ++ break; ++ } ++ dwc_udelay(1); ++ } while (greset.b.rxfflsh == 1); ++ ++ /* Wait for 3 PHY Clocks */ ++ dwc_udelay(1); ++} ++ ++/** ++ * Do core a soft reset of the core. Be careful with this because it ++ * resets all the internal state machines of the core. ++ */ ++void dwc_otg_core_reset(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ volatile grstctl_t greset = {.d32 = 0 }; ++ int count = 0; ++ ++ DWC_DEBUGPL(DBG_CILV, "%s\n", __func__); ++ /* Wait for AHB master IDLE state. */ ++ do { ++ dwc_udelay(10); ++ greset.d32 = DWC_READ_REG32(&global_regs->grstctl); ++ if (++count > 100000) { ++ DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x\n", __func__, ++ greset.d32); ++ return; ++ } ++ } ++ while (greset.b.ahbidle == 0); ++ ++ /* Core Soft Reset */ ++ count = 0; ++ greset.b.csftrst = 1; ++ DWC_WRITE_REG32(&global_regs->grstctl, greset.d32); ++ do { ++ greset.d32 = DWC_READ_REG32(&global_regs->grstctl); ++ if (++count > 10000) { ++ DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", ++ __func__, greset.d32); ++ break; ++ } ++ dwc_udelay(1); ++ } ++ while (greset.b.csftrst == 1); ++ ++ /* Wait for 3 PHY Clocks */ ++ dwc_mdelay(100); ++} ++ ++uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t * _core_if) ++{ ++ return (dwc_otg_mode(_core_if) != DWC_HOST_MODE); ++} ++ ++uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t * _core_if) ++{ ++ return (dwc_otg_mode(_core_if) == DWC_HOST_MODE); ++} ++ ++/** ++ * Register HCD callbacks. The callbacks are used to start and stop ++ * the HCD for interrupt processing. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param cb the HCD callback structure. ++ * @param p pointer to be passed to callback function (usb_hcd*). ++ */ ++void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t * core_if, ++ dwc_otg_cil_callbacks_t * cb, void *p) ++{ ++ core_if->hcd_cb = cb; ++ cb->p = p; ++} ++ ++/** ++ * Register PCD callbacks. The callbacks are used to start and stop ++ * the PCD for interrupt processing. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param cb the PCD callback structure. ++ * @param p pointer to be passed to callback function (pcd*). ++ */ ++void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t * core_if, ++ dwc_otg_cil_callbacks_t * cb, void *p) ++{ ++ core_if->pcd_cb = cb; ++ cb->p = p; ++} ++ ++#ifdef DWC_EN_ISOC ++ ++/** ++ * This function writes isoc data per 1 (micro)frame into tx fifo ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++void write_isoc_frame_data(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ dwc_otg_dev_in_ep_regs_t *ep_regs; ++ dtxfsts_data_t txstatus = {.d32 = 0 }; ++ uint32_t len = 0; ++ uint32_t dwords; ++ ++ ep->xfer_len = ep->data_per_frame; ++ ep->xfer_count = 0; ++ ++ ep_regs = core_if->dev_if->in_ep_regs[ep->num]; ++ ++ len = ep->xfer_len - ep->xfer_count; ++ ++ if (len > ep->maxpacket) { ++ len = ep->maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ ++ /* While there is space in the queue and space in the FIFO and ++ * More data to tranfer, Write packets to the Tx FIFO */ ++ txstatus.d32 = ++ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", ep->num, txstatus.d32); ++ ++ while (txstatus.b.txfspcavail > dwords && ++ ep->xfer_count < ep->xfer_len && ep->xfer_len != 0) { ++ /* Write the FIFO */ ++ dwc_otg_ep_write_packet(core_if, ep, 0); ++ ++ len = ep->xfer_len - ep->xfer_count; ++ if (len > ep->maxpacket) { ++ len = ep->maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ txstatus.d32 = ++ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", ep->num, ++ txstatus.d32); ++ } ++} ++ ++/** ++ * This function initializes a descriptor chain for Isochronous transfer ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * ep) ++{ ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ dsts_data_t dsts = {.d32 = 0 }; ++ volatile uint32_t *addr; ++ ++ if (ep->is_in) { ++ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; ++ } else { ++ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; ++ } ++ ++ ep->xfer_len = ep->data_per_frame; ++ ep->xfer_count = 0; ++ ep->xfer_buff = ep->cur_pkt_addr; ++ ep->dma_addr = ep->cur_pkt_dma_addr; ++ ++ if (ep->is_in) { ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ deptsiz.b.xfersize = ep->xfer_len; ++ deptsiz.b.pktcnt = ++ (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket; ++ deptsiz.b.mc = deptsiz.b.pktcnt; ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, ++ deptsiz.d32); ++ ++ /* Write the DMA register */ ++ if (core_if->dma_enable) { ++ DWC_WRITE_REG32(& ++ (core_if->dev_if->in_ep_regs[ep->num]-> ++ diepdma), (uint32_t) ep->dma_addr); ++ } ++ } else { ++ deptsiz.b.pktcnt = ++ (ep->xfer_len + (ep->maxpacket - 1)) / ep->maxpacket; ++ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket; ++ ++ DWC_WRITE_REG32(&core_if->dev_if-> ++ out_ep_regs[ep->num]->doeptsiz, deptsiz.d32); ++ ++ if (core_if->dma_enable) { ++ DWC_WRITE_REG32(& ++ (core_if->dev_if-> ++ out_ep_regs[ep->num]->doepdma), ++ (uint32_t) ep->dma_addr); ++ } ++ } ++ ++ /** Enable endpoint, clear nak */ ++ ++ depctl.d32 = 0; ++ if (ep->bInterval == 1) { ++ dsts.d32 = ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ ep->next_frame = dsts.b.soffn + ep->bInterval; ++ ++ if (ep->next_frame & 0x1) { ++ depctl.b.setd1pid = 1; ++ } else { ++ depctl.b.setd0pid = 1; ++ } ++ } else { ++ ep->next_frame += ep->bInterval; ++ ++ if (ep->next_frame & 0x1) { ++ depctl.b.setd1pid = 1; ++ } else { ++ depctl.b.setd0pid = 1; ++ } ++ } ++ depctl.b.epena = 1; ++ depctl.b.cnak = 1; ++ ++ DWC_MODIFY_REG32(addr, 0, depctl.d32); ++ depctl.d32 = DWC_READ_REG32(addr); ++ ++ if (ep->is_in && core_if->dma_enable == 0) { ++ write_isoc_frame_data(core_if, ep); ++ } ++ ++} ++#endif /* DWC_EN_ISOC */ ++ ++static void dwc_otg_set_uninitialized(int32_t * p, int size) ++{ ++ int i; ++ for (i = 0; i < size; i++) { ++ p[i] = -1; ++ } ++} ++ ++static int dwc_otg_param_initialized(int32_t val) ++{ ++ return val != -1; ++} ++ ++static int dwc_otg_setup_params(dwc_otg_core_if_t * core_if) ++{ ++ int i; ++ core_if->core_params = DWC_ALLOC(sizeof(*core_if->core_params)); ++ if (!core_if->core_params) { ++ return -DWC_E_NO_MEMORY; ++ } ++ dwc_otg_set_uninitialized((int32_t *) core_if->core_params, ++ sizeof(*core_if->core_params) / ++ sizeof(int32_t)); ++ DWC_PRINTF("Setting default values for core params\n"); ++ dwc_otg_set_param_otg_cap(core_if, dwc_param_otg_cap_default); ++ dwc_otg_set_param_dma_enable(core_if, dwc_param_dma_enable_default); ++ dwc_otg_set_param_dma_desc_enable(core_if, ++ dwc_param_dma_desc_enable_default); ++ dwc_otg_set_param_opt(core_if, dwc_param_opt_default); ++ dwc_otg_set_param_dma_burst_size(core_if, ++ dwc_param_dma_burst_size_default); ++ dwc_otg_set_param_host_support_fs_ls_low_power(core_if, ++ dwc_param_host_support_fs_ls_low_power_default); ++ dwc_otg_set_param_enable_dynamic_fifo(core_if, ++ dwc_param_enable_dynamic_fifo_default); ++ dwc_otg_set_param_data_fifo_size(core_if, ++ dwc_param_data_fifo_size_default); ++ dwc_otg_set_param_dev_rx_fifo_size(core_if, ++ dwc_param_dev_rx_fifo_size_default); ++ dwc_otg_set_param_dev_nperio_tx_fifo_size(core_if, ++ dwc_param_dev_nperio_tx_fifo_size_default); ++ dwc_otg_set_param_host_rx_fifo_size(core_if, ++ dwc_param_host_rx_fifo_size_default); ++ dwc_otg_set_param_host_nperio_tx_fifo_size(core_if, ++ dwc_param_host_nperio_tx_fifo_size_default); ++ dwc_otg_set_param_host_perio_tx_fifo_size(core_if, ++ dwc_param_host_perio_tx_fifo_size_default); ++ dwc_otg_set_param_max_transfer_size(core_if, ++ dwc_param_max_transfer_size_default); ++ dwc_otg_set_param_max_packet_count(core_if, ++ dwc_param_max_packet_count_default); ++ dwc_otg_set_param_host_channels(core_if, ++ dwc_param_host_channels_default); ++ dwc_otg_set_param_dev_endpoints(core_if, ++ dwc_param_dev_endpoints_default); ++ dwc_otg_set_param_phy_type(core_if, dwc_param_phy_type_default); ++ dwc_otg_set_param_speed(core_if, dwc_param_speed_default); ++ dwc_otg_set_param_host_ls_low_power_phy_clk(core_if, ++ dwc_param_host_ls_low_power_phy_clk_default); ++ dwc_otg_set_param_phy_ulpi_ddr(core_if, dwc_param_phy_ulpi_ddr_default); ++ dwc_otg_set_param_phy_ulpi_ext_vbus(core_if, ++ dwc_param_phy_ulpi_ext_vbus_default); ++ dwc_otg_set_param_phy_utmi_width(core_if, ++ dwc_param_phy_utmi_width_default); ++ dwc_otg_set_param_ts_dline(core_if, dwc_param_ts_dline_default); ++ dwc_otg_set_param_i2c_enable(core_if, dwc_param_i2c_enable_default); ++ dwc_otg_set_param_ulpi_fs_ls(core_if, dwc_param_ulpi_fs_ls_default); ++ dwc_otg_set_param_en_multiple_tx_fifo(core_if, ++ dwc_param_en_multiple_tx_fifo_default); ++ for (i = 0; i < 15; i++) { ++ dwc_otg_set_param_dev_perio_tx_fifo_size(core_if, ++ dwc_param_dev_perio_tx_fifo_size_default, ++ i); ++ } ++ ++ for (i = 0; i < 15; i++) { ++ dwc_otg_set_param_dev_tx_fifo_size(core_if, ++ dwc_param_dev_tx_fifo_size_default, ++ i); ++ } ++ dwc_otg_set_param_thr_ctl(core_if, dwc_param_thr_ctl_default); ++ dwc_otg_set_param_mpi_enable(core_if, dwc_param_mpi_enable_default); ++ dwc_otg_set_param_pti_enable(core_if, dwc_param_pti_enable_default); ++ dwc_otg_set_param_lpm_enable(core_if, dwc_param_lpm_enable_default); ++ dwc_otg_set_param_ic_usb_cap(core_if, dwc_param_ic_usb_cap_default); ++ dwc_otg_set_param_tx_thr_length(core_if, ++ dwc_param_tx_thr_length_default); ++ dwc_otg_set_param_rx_thr_length(core_if, ++ dwc_param_rx_thr_length_default); ++ dwc_otg_set_param_ahb_thr_ratio(core_if, ++ dwc_param_ahb_thr_ratio_default); ++ dwc_otg_set_param_power_down(core_if, dwc_param_power_down_default); ++ dwc_otg_set_param_reload_ctl(core_if, dwc_param_reload_ctl_default); ++ dwc_otg_set_param_dev_out_nak(core_if, dwc_param_dev_out_nak_default); ++ dwc_otg_set_param_cont_on_bna(core_if, dwc_param_cont_on_bna_default); ++ dwc_otg_set_param_ahb_single(core_if, dwc_param_ahb_single_default); ++ dwc_otg_set_param_otg_ver(core_if, dwc_param_otg_ver_default); ++ dwc_otg_set_param_adp_enable(core_if, dwc_param_adp_enable_default); ++ DWC_PRINTF("Finished setting default values for core params\n"); ++ ++ return 0; ++} ++ ++uint8_t dwc_otg_is_dma_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->dma_enable; ++} ++ ++/* Checks if the parameter is outside of its valid range of values */ ++#define DWC_OTG_PARAM_TEST(_param_, _low_, _high_) \ ++ (((_param_) < (_low_)) || \ ++ ((_param_) > (_high_))) ++ ++/* Parameter access functions */ ++int dwc_otg_set_param_otg_cap(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int valid; ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 2)) { ++ DWC_WARN("Wrong value for otg_cap parameter\n"); ++ DWC_WARN("otg_cap parameter must be 0,1 or 2\n"); ++ retval = -DWC_E_INVALID; ++ goto out; ++ } ++ ++ valid = 1; ++ switch (val) { ++ case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE: ++ if (core_if->hwcfg2.b.op_mode != ++ DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ++ valid = 0; ++ break; ++ case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE: ++ if ((core_if->hwcfg2.b.op_mode != ++ DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ++ && (core_if->hwcfg2.b.op_mode != ++ DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) ++ && (core_if->hwcfg2.b.op_mode != ++ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ++ && (core_if->hwcfg2.b.op_mode != ++ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) { ++ valid = 0; ++ } ++ break; ++ case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE: ++ /* always valid */ ++ break; ++ } ++ if (!valid) { ++ if (dwc_otg_param_initialized(core_if->core_params->otg_cap)) { ++ DWC_ERROR ++ ("%d invalid for otg_cap paremter. Check HW configuration.\n", ++ val); ++ } ++ val = ++ (((core_if->hwcfg2.b.op_mode == ++ DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ++ || (core_if->hwcfg2.b.op_mode == ++ DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) ++ || (core_if->hwcfg2.b.op_mode == ++ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ++ || (core_if->hwcfg2.b.op_mode == ++ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ? ++ DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE : ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->otg_cap = val; ++out: ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_otg_cap(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->otg_cap; ++} ++ ++int dwc_otg_set_param_opt(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for opt parameter\n"); ++ return -DWC_E_INVALID; ++ } ++ core_if->core_params->opt = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_opt(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->opt; ++} ++ ++int dwc_otg_set_param_dma_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for dma enable\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 1) && (core_if->hwcfg2.b.architecture == 0)) { ++ if (dwc_otg_param_initialized(core_if->core_params->dma_enable)) { ++ DWC_ERROR ++ ("%d invalid for dma_enable paremter. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->dma_enable = val; ++ if (val == 0) { ++ dwc_otg_set_param_dma_desc_enable(core_if, 0); ++ } ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dma_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dma_enable; ++} ++ ++int dwc_otg_set_param_dma_desc_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for dma_enable\n"); ++ DWC_WARN("dma_desc_enable must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 1) ++ && ((dwc_otg_get_param_dma_enable(core_if) == 0) ++ || (core_if->hwcfg4.b.desc_dma == 0))) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->dma_desc_enable)) { ++ DWC_ERROR ++ ("%d invalid for dma_desc_enable paremter. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++ core_if->core_params->dma_desc_enable = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dma_desc_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dma_desc_enable; ++} ++ ++int dwc_otg_set_param_host_support_fs_ls_low_power(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for host_support_fs_low_power\n"); ++ DWC_WARN("host_support_fs_low_power must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ core_if->core_params->host_support_fs_ls_low_power = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_host_support_fs_ls_low_power(dwc_otg_core_if_t * ++ core_if) ++{ ++ return core_if->core_params->host_support_fs_ls_low_power; ++} ++ ++int dwc_otg_set_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for enable_dynamic_fifo\n"); ++ DWC_WARN("enable_dynamic_fifo must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 1) && (core_if->hwcfg2.b.dynamic_fifo == 0)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->enable_dynamic_fifo)) { ++ DWC_ERROR ++ ("%d invalid for enable_dynamic_fifo paremter. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++ core_if->core_params->enable_dynamic_fifo = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->enable_dynamic_fifo; ++} ++ ++int dwc_otg_set_param_data_fifo_size(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 32, 32768)) { ++ DWC_WARN("Wrong value for data_fifo_size\n"); ++ DWC_WARN("data_fifo_size must be 32-32768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > core_if->hwcfg3.b.dfifo_depth) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->data_fifo_size)) { ++ DWC_ERROR ++ ("%d invalid for data_fifo_size parameter. Check HW configuration.\n", ++ val); ++ } ++ val = core_if->hwcfg3.b.dfifo_depth; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->data_fifo_size = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_data_fifo_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->data_fifo_size; ++} ++ ++int dwc_otg_set_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { ++ DWC_WARN("Wrong value for dev_rx_fifo_size\n"); ++ DWC_WARN("dev_rx_fifo_size must be 16-32768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > DWC_READ_REG32(&core_if->core_global_regs->grxfsiz)) { ++ if (dwc_otg_param_initialized(core_if->core_params->dev_rx_fifo_size)) { ++ DWC_WARN("%d invalid for dev_rx_fifo_size parameter\n", val); ++ } ++ val = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->dev_rx_fifo_size = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dev_rx_fifo_size; ++} ++ ++int dwc_otg_set_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { ++ DWC_WARN("Wrong value for dev_nperio_tx_fifo\n"); ++ DWC_WARN("dev_nperio_tx_fifo must be 16-32768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> 16)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->dev_nperio_tx_fifo_size)) { ++ DWC_ERROR ++ ("%d invalid for dev_nperio_tx_fifo_size. Check HW configuration.\n", ++ val); ++ } ++ val = ++ (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> ++ 16); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->dev_nperio_tx_fifo_size = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dev_nperio_tx_fifo_size; ++} ++ ++int dwc_otg_set_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { ++ DWC_WARN("Wrong value for host_rx_fifo_size\n"); ++ DWC_WARN("host_rx_fifo_size must be 16-32768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > DWC_READ_REG32(&core_if->core_global_regs->grxfsiz)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->host_rx_fifo_size)) { ++ DWC_ERROR ++ ("%d invalid for host_rx_fifo_size. Check HW configuration.\n", ++ val); ++ } ++ val = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->host_rx_fifo_size = val; ++ return retval; ++ ++} ++ ++int32_t dwc_otg_get_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->host_rx_fifo_size; ++} ++ ++int dwc_otg_set_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { ++ DWC_WARN("Wrong value for host_nperio_tx_fifo_size\n"); ++ DWC_WARN("host_nperio_tx_fifo_size must be 16-32768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> 16)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->host_nperio_tx_fifo_size)) { ++ DWC_ERROR ++ ("%d invalid for host_nperio_tx_fifo_size. Check HW configuration.\n", ++ val); ++ } ++ val = ++ (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> ++ 16); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->host_nperio_tx_fifo_size = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->host_nperio_tx_fifo_size; ++} ++ ++int dwc_otg_set_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { ++ DWC_WARN("Wrong value for host_perio_tx_fifo_size\n"); ++ DWC_WARN("host_perio_tx_fifo_size must be 16-32768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > ((core_if->hptxfsiz.d32) >> 16)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->host_perio_tx_fifo_size)) { ++ DWC_ERROR ++ ("%d invalid for host_perio_tx_fifo_size. Check HW configuration.\n", ++ val); ++ } ++ val = (core_if->hptxfsiz.d32) >> 16; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->host_perio_tx_fifo_size = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->host_perio_tx_fifo_size; ++} ++ ++int dwc_otg_set_param_max_transfer_size(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 2047, 524288)) { ++ DWC_WARN("Wrong value for max_transfer_size\n"); ++ DWC_WARN("max_transfer_size must be 2047-524288\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val >= (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->max_transfer_size)) { ++ DWC_ERROR ++ ("%d invalid for max_transfer_size. Check HW configuration.\n", ++ val); ++ } ++ val = ++ ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 11)) - ++ 1); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->max_transfer_size = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_max_transfer_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->max_transfer_size; ++} ++ ++int dwc_otg_set_param_max_packet_count(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 15, 511)) { ++ DWC_WARN("Wrong value for max_packet_count\n"); ++ DWC_WARN("max_packet_count must be 15-511\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->max_packet_count)) { ++ DWC_ERROR ++ ("%d invalid for max_packet_count. Check HW configuration.\n", ++ val); ++ } ++ val = ++ ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->max_packet_count = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_max_packet_count(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->max_packet_count; ++} ++ ++int dwc_otg_set_param_host_channels(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 1, 16)) { ++ DWC_WARN("Wrong value for host_channels\n"); ++ DWC_WARN("host_channels must be 1-16\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > (core_if->hwcfg2.b.num_host_chan + 1)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->host_channels)) { ++ DWC_ERROR ++ ("%d invalid for host_channels. Check HW configurations.\n", ++ val); ++ } ++ val = (core_if->hwcfg2.b.num_host_chan + 1); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->host_channels = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_host_channels(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->host_channels; ++} ++ ++int dwc_otg_set_param_dev_endpoints(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 1, 15)) { ++ DWC_WARN("Wrong value for dev_endpoints\n"); ++ DWC_WARN("dev_endpoints must be 1-15\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > (core_if->hwcfg2.b.num_dev_ep)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->dev_endpoints)) { ++ DWC_ERROR ++ ("%d invalid for dev_endpoints. Check HW configurations.\n", ++ val); ++ } ++ val = core_if->hwcfg2.b.num_dev_ep; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->dev_endpoints = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dev_endpoints(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dev_endpoints; ++} ++ ++int dwc_otg_set_param_phy_type(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ int valid = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 2)) { ++ DWC_WARN("Wrong value for phy_type\n"); ++ DWC_WARN("phy_type must be 0,1 or 2\n"); ++ return -DWC_E_INVALID; ++ } ++#ifndef NO_FS_PHY_HW_CHECKS ++ if ((val == DWC_PHY_TYPE_PARAM_UTMI) && ++ ((core_if->hwcfg2.b.hs_phy_type == 1) || ++ (core_if->hwcfg2.b.hs_phy_type == 3))) { ++ valid = 1; ++ } else if ((val == DWC_PHY_TYPE_PARAM_ULPI) && ++ ((core_if->hwcfg2.b.hs_phy_type == 2) || ++ (core_if->hwcfg2.b.hs_phy_type == 3))) { ++ valid = 1; ++ } else if ((val == DWC_PHY_TYPE_PARAM_FS) && ++ (core_if->hwcfg2.b.fs_phy_type == 1)) { ++ valid = 1; ++ } ++ if (!valid) { ++ if (dwc_otg_param_initialized(core_if->core_params->phy_type)) { ++ DWC_ERROR ++ ("%d invalid for phy_type. Check HW configurations.\n", ++ val); ++ } ++ if (core_if->hwcfg2.b.hs_phy_type) { ++ if ((core_if->hwcfg2.b.hs_phy_type == 3) || ++ (core_if->hwcfg2.b.hs_phy_type == 1)) { ++ val = DWC_PHY_TYPE_PARAM_UTMI; ++ } else { ++ val = DWC_PHY_TYPE_PARAM_ULPI; ++ } ++ } ++ retval = -DWC_E_INVALID; ++ } ++#endif ++ core_if->core_params->phy_type = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_phy_type(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->phy_type; ++} ++ ++int dwc_otg_set_param_speed(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for speed parameter\n"); ++ DWC_WARN("max_speed parameter must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ if ((val == 0) ++ && dwc_otg_get_param_phy_type(core_if) == DWC_PHY_TYPE_PARAM_FS) { ++ if (dwc_otg_param_initialized(core_if->core_params->speed)) { ++ DWC_ERROR ++ ("%d invalid for speed paremter. Check HW configuration.\n", ++ val); ++ } ++ val = ++ (dwc_otg_get_param_phy_type(core_if) == ++ DWC_PHY_TYPE_PARAM_FS ? 1 : 0); ++ retval = -DWC_E_INVALID; ++ } ++ core_if->core_params->speed = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_speed(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->speed; ++} ++ ++int dwc_otg_set_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN ++ ("Wrong value for host_ls_low_power_phy_clk parameter\n"); ++ DWC_WARN("host_ls_low_power_phy_clk must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ) ++ && (dwc_otg_get_param_phy_type(core_if) == DWC_PHY_TYPE_PARAM_FS)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->host_ls_low_power_phy_clk)) { ++ DWC_ERROR ++ ("%d invalid for host_ls_low_power_phy_clk. Check HW configuration.\n", ++ val); ++ } ++ val = ++ (dwc_otg_get_param_phy_type(core_if) == ++ DWC_PHY_TYPE_PARAM_FS) ? ++ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ : ++ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->host_ls_low_power_phy_clk = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->host_ls_low_power_phy_clk; ++} ++ ++int dwc_otg_set_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for phy_ulpi_ddr\n"); ++ DWC_WARN("phy_upli_ddr must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->phy_ulpi_ddr = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->phy_ulpi_ddr; ++} ++ ++int dwc_otg_set_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong valaue for phy_ulpi_ext_vbus\n"); ++ DWC_WARN("phy_ulpi_ext_vbus must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->phy_ulpi_ext_vbus = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->phy_ulpi_ext_vbus; ++} ++ ++int dwc_otg_set_param_phy_utmi_width(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 8, 8) && DWC_OTG_PARAM_TEST(val, 16, 16)) { ++ DWC_WARN("Wrong valaue for phy_utmi_width\n"); ++ DWC_WARN("phy_utmi_width must be 8 or 16\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->phy_utmi_width = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_phy_utmi_width(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->phy_utmi_width; ++} ++ ++int dwc_otg_set_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong valaue for ulpi_fs_ls\n"); ++ DWC_WARN("ulpi_fs_ls must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->ulpi_fs_ls = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->ulpi_fs_ls; ++} ++ ++int dwc_otg_set_param_ts_dline(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong valaue for ts_dline\n"); ++ DWC_WARN("ts_dline must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->ts_dline = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_ts_dline(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->ts_dline; ++} ++ ++int dwc_otg_set_param_i2c_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong valaue for i2c_enable\n"); ++ DWC_WARN("i2c_enable must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++#ifndef NO_FS_PHY_HW_CHECK ++ if (val == 1 && core_if->hwcfg3.b.i2c == 0) { ++ if (dwc_otg_param_initialized(core_if->core_params->i2c_enable)) { ++ DWC_ERROR ++ ("%d invalid for i2c_enable. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++#endif ++ ++ core_if->core_params->i2c_enable = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_i2c_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->i2c_enable; ++} ++ ++int dwc_otg_set_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val, int fifo_num) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 4, 768)) { ++ DWC_WARN("Wrong value for dev_perio_tx_fifo_size\n"); ++ DWC_WARN("dev_perio_tx_fifo_size must be 4-768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > ++ (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]))) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->dev_perio_tx_fifo_size[fifo_num])) { ++ DWC_ERROR ++ ("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", ++ val, fifo_num); ++ } ++ val = (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num])); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->dev_perio_tx_fifo_size[fifo_num] = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int fifo_num) ++{ ++ return core_if->core_params->dev_perio_tx_fifo_size[fifo_num]; ++} ++ ++int dwc_otg_set_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong valaue for en_multiple_tx_fifo,\n"); ++ DWC_WARN("en_multiple_tx_fifo must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val == 1 && core_if->hwcfg4.b.ded_fifo_en == 0) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->en_multiple_tx_fifo)) { ++ DWC_ERROR ++ ("%d invalid for parameter en_multiple_tx_fifo. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->en_multiple_tx_fifo = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->en_multiple_tx_fifo; ++} ++ ++int dwc_otg_set_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val, ++ int fifo_num) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 4, 768)) { ++ DWC_WARN("Wrong value for dev_tx_fifo_size\n"); ++ DWC_WARN("dev_tx_fifo_size must be 4-768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > ++ (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]))) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->dev_tx_fifo_size[fifo_num])) { ++ DWC_ERROR ++ ("`%d' invalid for parameter `dev_tx_fifo_size_%d'. Check HW configuration.\n", ++ val, fifo_num); ++ } ++ val = (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num])); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->dev_tx_fifo_size[fifo_num] = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int fifo_num) ++{ ++ return core_if->core_params->dev_tx_fifo_size[fifo_num]; ++} ++ ++int dwc_otg_set_param_thr_ctl(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 7)) { ++ DWC_WARN("Wrong value for thr_ctl\n"); ++ DWC_WARN("thr_ctl must be 0-7\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val != 0) && ++ (!dwc_otg_get_param_dma_enable(core_if) || ++ !core_if->hwcfg4.b.ded_fifo_en)) { ++ if (dwc_otg_param_initialized(core_if->core_params->thr_ctl)) { ++ DWC_ERROR ++ ("%d invalid for parameter thr_ctl. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->thr_ctl = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_thr_ctl(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->thr_ctl; ++} ++ ++int dwc_otg_set_param_lpm_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for lpm_enable\n"); ++ DWC_WARN("lpm_enable must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val && !core_if->hwcfg3.b.otg_lpm_en) { ++ if (dwc_otg_param_initialized(core_if->core_params->lpm_enable)) { ++ DWC_ERROR ++ ("%d invalid for parameter lpm_enable. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->lpm_enable = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_lpm_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->lpm_enable; ++} ++ ++int dwc_otg_set_param_tx_thr_length(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 8, 128)) { ++ DWC_WARN("Wrong valaue for tx_thr_length\n"); ++ DWC_WARN("tx_thr_length must be 8 - 128\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->tx_thr_length = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_tx_thr_length(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->tx_thr_length; ++} ++ ++int dwc_otg_set_param_rx_thr_length(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 8, 128)) { ++ DWC_WARN("Wrong valaue for rx_thr_length\n"); ++ DWC_WARN("rx_thr_length must be 8 - 128\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->rx_thr_length = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_rx_thr_length(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->rx_thr_length; ++} ++ ++int dwc_otg_set_param_dma_burst_size(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 1, 1) && ++ DWC_OTG_PARAM_TEST(val, 4, 4) && ++ DWC_OTG_PARAM_TEST(val, 8, 8) && ++ DWC_OTG_PARAM_TEST(val, 16, 16) && ++ DWC_OTG_PARAM_TEST(val, 32, 32) && ++ DWC_OTG_PARAM_TEST(val, 64, 64) && ++ DWC_OTG_PARAM_TEST(val, 128, 128) && ++ DWC_OTG_PARAM_TEST(val, 256, 256)) { ++ DWC_WARN("`%d' invalid for parameter `dma_burst_size'\n", val); ++ return -DWC_E_INVALID; ++ } ++ core_if->core_params->dma_burst_size = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_dma_burst_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dma_burst_size; ++} ++ ++int dwc_otg_set_param_pti_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `pti_enable'\n", val); ++ return -DWC_E_INVALID; ++ } ++ if (val && (core_if->snpsid < OTG_CORE_REV_2_72a)) { ++ if (dwc_otg_param_initialized(core_if->core_params->pti_enable)) { ++ DWC_ERROR ++ ("%d invalid for parameter pti_enable. Check HW configuration.\n", ++ val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->pti_enable = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_pti_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->pti_enable; ++} ++ ++int dwc_otg_set_param_mpi_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `mpi_enable'\n", val); ++ return -DWC_E_INVALID; ++ } ++ if (val && (core_if->hwcfg2.b.multi_proc_int == 0)) { ++ if (dwc_otg_param_initialized(core_if->core_params->mpi_enable)) { ++ DWC_ERROR ++ ("%d invalid for parameter mpi_enable. Check HW configuration.\n", ++ val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->mpi_enable = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_mpi_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->mpi_enable; ++} ++ ++int dwc_otg_set_param_adp_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `adp_enable'\n", val); ++ return -DWC_E_INVALID; ++ } ++ if (val && (core_if->hwcfg3.b.adp_supp == 0)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->adp_supp_enable)) { ++ DWC_ERROR ++ ("%d invalid for parameter adp_enable. Check HW configuration.\n", ++ val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->adp_supp_enable = val; ++ /*Set OTG version 2.0 in case of enabling ADP*/ ++ if (val) ++ dwc_otg_set_param_otg_ver(core_if, 1); ++ ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_adp_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->adp_supp_enable; ++} ++ ++int dwc_otg_set_param_ic_usb_cap(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `ic_usb_cap'\n", val); ++ DWC_WARN("ic_usb_cap must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val && (core_if->hwcfg2.b.otg_enable_ic_usb == 0)) { ++ if (dwc_otg_param_initialized(core_if->core_params->ic_usb_cap)) { ++ DWC_ERROR ++ ("%d invalid for parameter ic_usb_cap. Check HW configuration.\n", ++ val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->ic_usb_cap = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_ic_usb_cap(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->ic_usb_cap; ++} ++ ++int dwc_otg_set_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ int valid = 1; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 3)) { ++ DWC_WARN("`%d' invalid for parameter `ahb_thr_ratio'\n", val); ++ DWC_WARN("ahb_thr_ratio must be 0 - 3\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val ++ && (core_if->snpsid < OTG_CORE_REV_2_81a ++ || !dwc_otg_get_param_thr_ctl(core_if))) { ++ valid = 0; ++ } else if (val ++ && ((dwc_otg_get_param_tx_thr_length(core_if) / (1 << val)) < ++ 4)) { ++ valid = 0; ++ } ++ if (valid == 0) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->ahb_thr_ratio)) { ++ DWC_ERROR ++ ("%d invalid for parameter ahb_thr_ratio. Check HW configuration.\n", ++ val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ ++ core_if->core_params->ahb_thr_ratio = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->ahb_thr_ratio; ++} ++ ++int dwc_otg_set_param_power_down(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ int valid = 1; ++ hwcfg4_data_t hwcfg4 = {.d32 = 0 }; ++ hwcfg4.d32 = DWC_READ_REG32(&core_if->core_global_regs->ghwcfg4); ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 3)) { ++ DWC_WARN("`%d' invalid for parameter `power_down'\n", val); ++ DWC_WARN("power_down must be 0 - 2\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 2) && (core_if->snpsid < OTG_CORE_REV_2_91a)) { ++ valid = 0; ++ } ++ if ((val == 3) ++ && ((core_if->snpsid < OTG_CORE_REV_3_00a) ++ || (hwcfg4.b.xhiber == 0))) { ++ valid = 0; ++ } ++ if (valid == 0) { ++ if (dwc_otg_param_initialized(core_if->core_params->power_down)) { ++ DWC_ERROR ++ ("%d invalid for parameter power_down. Check HW configuration.\n", ++ val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->power_down = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_power_down(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->power_down; ++} ++ ++int dwc_otg_set_param_reload_ctl(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ int valid = 1; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `reload_ctl'\n", val); ++ DWC_WARN("reload_ctl must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 1) && (core_if->snpsid < OTG_CORE_REV_2_92a)) { ++ valid = 0; ++ } ++ if (valid == 0) { ++ if (dwc_otg_param_initialized(core_if->core_params->reload_ctl)) { ++ DWC_ERROR("%d invalid for parameter reload_ctl." ++ "Check HW configuration.\n", val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->reload_ctl = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_reload_ctl(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->reload_ctl; ++} ++ ++int dwc_otg_set_param_dev_out_nak(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ int valid = 1; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `dev_out_nak'\n", val); ++ DWC_WARN("dev_out_nak must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 1) && ((core_if->snpsid < OTG_CORE_REV_2_93a) || ++ !(core_if->core_params->dma_desc_enable))) { ++ valid = 0; ++ } ++ if (valid == 0) { ++ if (dwc_otg_param_initialized(core_if->core_params->dev_out_nak)) { ++ DWC_ERROR("%d invalid for parameter dev_out_nak." ++ "Check HW configuration.\n", val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->dev_out_nak = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dev_out_nak(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dev_out_nak; ++} ++ ++int dwc_otg_set_param_cont_on_bna(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ int valid = 1; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `cont_on_bna'\n", val); ++ DWC_WARN("cont_on_bna must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 1) && ((core_if->snpsid < OTG_CORE_REV_2_94a) || ++ !(core_if->core_params->dma_desc_enable))) { ++ valid = 0; ++ } ++ if (valid == 0) { ++ if (dwc_otg_param_initialized(core_if->core_params->cont_on_bna)) { ++ DWC_ERROR("%d invalid for parameter cont_on_bna." ++ "Check HW configuration.\n", val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->cont_on_bna = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_cont_on_bna(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->cont_on_bna; ++} ++ ++int dwc_otg_set_param_ahb_single(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ int valid = 1; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `ahb_single'\n", val); ++ DWC_WARN("ahb_single must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 1) && (core_if->snpsid < OTG_CORE_REV_2_94a)) { ++ valid = 0; ++ } ++ if (valid == 0) { ++ if (dwc_otg_param_initialized(core_if->core_params->ahb_single)) { ++ DWC_ERROR("%d invalid for parameter ahb_single." ++ "Check HW configuration.\n", val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->ahb_single = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_ahb_single(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->ahb_single; ++} ++ ++int dwc_otg_set_param_otg_ver(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `otg_ver'\n", val); ++ DWC_WARN ++ ("otg_ver must be 0(for OTG 1.3 support) or 1(for OTG 2.0 support)\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->otg_ver = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_otg_ver(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->otg_ver; ++} ++ ++uint32_t dwc_otg_get_hnpstatus(dwc_otg_core_if_t * core_if) ++{ ++ gotgctl_data_t otgctl; ++ otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++ return otgctl.b.hstnegscs; ++} ++ ++uint32_t dwc_otg_get_srpstatus(dwc_otg_core_if_t * core_if) ++{ ++ gotgctl_data_t otgctl; ++ otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++ return otgctl.b.sesreqscs; ++} ++ ++void dwc_otg_set_hnpreq(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ if(core_if->otg_ver == 0) { ++ gotgctl_data_t otgctl; ++ otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++ otgctl.b.hnpreq = val; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, otgctl.d32); ++ } else { ++ core_if->otg_sts = val; ++ } ++} ++ ++uint32_t dwc_otg_get_gsnpsid(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->snpsid; ++} ++ ++uint32_t dwc_otg_get_mode(dwc_otg_core_if_t * core_if) ++{ ++ gintsts_data_t gintsts; ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ return gintsts.b.curmode; ++} ++ ++uint32_t dwc_otg_get_hnpcapable(dwc_otg_core_if_t * core_if) ++{ ++ gusbcfg_data_t usbcfg; ++ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ return usbcfg.b.hnpcap; ++} ++ ++void dwc_otg_set_hnpcapable(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ gusbcfg_data_t usbcfg; ++ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ usbcfg.b.hnpcap = val; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, usbcfg.d32); ++} ++ ++uint32_t dwc_otg_get_srpcapable(dwc_otg_core_if_t * core_if) ++{ ++ gusbcfg_data_t usbcfg; ++ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ return usbcfg.b.srpcap; ++} ++ ++void dwc_otg_set_srpcapable(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ gusbcfg_data_t usbcfg; ++ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ usbcfg.b.srpcap = val; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, usbcfg.d32); ++} ++ ++uint32_t dwc_otg_get_devspeed(dwc_otg_core_if_t * core_if) ++{ ++ dcfg_data_t dcfg; ++ /* originally: dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); */ ++ ++ dcfg.d32 = -1; //GRAYG ++ DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)\n", __func__, core_if); ++ if (NULL == core_if) ++ DWC_ERROR("reg request with NULL core_if\n"); ++ DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)->dev_if(%p)\n", __func__, ++ core_if, core_if->dev_if); ++ if (NULL == core_if->dev_if) ++ DWC_ERROR("reg request with NULL dev_if\n"); ++ DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)->dev_if(%p)->" ++ "dev_global_regs(%p)\n", __func__, ++ core_if, core_if->dev_if, ++ core_if->dev_if->dev_global_regs); ++ if (NULL == core_if->dev_if->dev_global_regs) ++ DWC_ERROR("reg request with NULL dev_global_regs\n"); ++ else { ++ DWC_DEBUGPL(DBG_CILV, "%s - &core_if(%p)->dev_if(%p)->" ++ "dev_global_regs(%p)->dcfg = %p\n", __func__, ++ core_if, core_if->dev_if, ++ core_if->dev_if->dev_global_regs, ++ &core_if->dev_if->dev_global_regs->dcfg); ++ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); ++ } ++ return dcfg.b.devspd; ++} ++ ++void dwc_otg_set_devspeed(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ dcfg_data_t dcfg; ++ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); ++ dcfg.b.devspd = val; ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32); ++} ++ ++uint32_t dwc_otg_get_busconnected(dwc_otg_core_if_t * core_if) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); ++ return hprt0.b.prtconnsts; ++} ++ ++uint32_t dwc_otg_get_enumspeed(dwc_otg_core_if_t * core_if) ++{ ++ dsts_data_t dsts; ++ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ return dsts.b.enumspd; ++} ++ ++uint32_t dwc_otg_get_prtpower(dwc_otg_core_if_t * core_if) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); ++ return hprt0.b.prtpwr; ++ ++} ++ ++uint32_t dwc_otg_get_core_state(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->hibernation_suspend; ++} ++ ++void dwc_otg_set_prtpower(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtpwr = val; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++} ++ ++uint32_t dwc_otg_get_prtsuspend(dwc_otg_core_if_t * core_if) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); ++ return hprt0.b.prtsusp; ++ ++} ++ ++void dwc_otg_set_prtsuspend(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtsusp = val; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++} ++ ++uint32_t dwc_otg_get_fr_interval(dwc_otg_core_if_t * core_if) ++{ ++ hfir_data_t hfir; ++ hfir.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir); ++ return hfir.b.frint; ++ ++} ++ ++void dwc_otg_set_fr_interval(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ hfir_data_t hfir; ++ uint32_t fram_int; ++ fram_int = calc_frame_interval(core_if); ++ hfir.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir); ++ if (!core_if->core_params->reload_ctl) { ++ DWC_WARN("\nCannot reload HFIR register.HFIR.HFIRRldCtrl bit is" ++ "not set to 1.\nShould load driver with reload_ctl=1" ++ " module parameter\n"); ++ return; ++ } ++ switch (fram_int) { ++ case 3750: ++ if ((val < 3350) || (val > 4150)) { ++ DWC_WARN("HFIR interval for HS core and 30 MHz" ++ "clock freq should be from 3350 to 4150\n"); ++ return; ++ } ++ break; ++ case 30000: ++ if ((val < 26820) || (val > 33180)) { ++ DWC_WARN("HFIR interval for FS/LS core and 30 MHz" ++ "clock freq should be from 26820 to 33180\n"); ++ return; ++ } ++ break; ++ case 6000: ++ if ((val < 5360) || (val > 6640)) { ++ DWC_WARN("HFIR interval for HS core and 48 MHz" ++ "clock freq should be from 5360 to 6640\n"); ++ return; ++ } ++ break; ++ case 48000: ++ if ((val < 42912) || (val > 53088)) { ++ DWC_WARN("HFIR interval for FS/LS core and 48 MHz" ++ "clock freq should be from 42912 to 53088\n"); ++ return; ++ } ++ break; ++ case 7500: ++ if ((val < 6700) || (val > 8300)) { ++ DWC_WARN("HFIR interval for HS core and 60 MHz" ++ "clock freq should be from 6700 to 8300\n"); ++ return; ++ } ++ break; ++ case 60000: ++ if ((val < 53640) || (val > 65536)) { ++ DWC_WARN("HFIR interval for FS/LS core and 60 MHz" ++ "clock freq should be from 53640 to 65536\n"); ++ return; ++ } ++ break; ++ default: ++ DWC_WARN("Unknown frame interval\n"); ++ return; ++ break; ++ ++ } ++ hfir.b.frint = val; ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hfir, hfir.d32); ++} ++ ++uint32_t dwc_otg_get_mode_ch_tim(dwc_otg_core_if_t * core_if) ++{ ++ hcfg_data_t hcfg; ++ hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); ++ return hcfg.b.modechtimen; ++ ++} ++ ++void dwc_otg_set_mode_ch_tim(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ hcfg_data_t hcfg; ++ hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); ++ hcfg.b.modechtimen = val; ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32); ++} ++ ++void dwc_otg_set_prtresume(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtres = val; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++} ++ ++uint32_t dwc_otg_get_remotewakesig(dwc_otg_core_if_t * core_if) ++{ ++ dctl_data_t dctl; ++ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); ++ return dctl.b.rmtwkupsig; ++} ++ ++uint32_t dwc_otg_get_lpm_portsleepstatus(dwc_otg_core_if_t * core_if) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ ++ DWC_ASSERT(! ++ ((core_if->lx_state == DWC_OTG_L1) ^ lpmcfg.b.prt_sleep_sts), ++ "lx_state = %d, lmpcfg.prt_sleep_sts = %d\n", ++ core_if->lx_state, lpmcfg.b.prt_sleep_sts); ++ ++ return lpmcfg.b.prt_sleep_sts; ++} ++ ++uint32_t dwc_otg_get_lpm_remotewakeenabled(dwc_otg_core_if_t * core_if) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ return lpmcfg.b.rem_wkup_en; ++} ++ ++uint32_t dwc_otg_get_lpmresponse(dwc_otg_core_if_t * core_if) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ return lpmcfg.b.appl_resp; ++} ++ ++void dwc_otg_set_lpmresponse(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ lpmcfg.b.appl_resp = val; ++ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); ++} ++ ++uint32_t dwc_otg_get_hsic_connect(dwc_otg_core_if_t * core_if) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ return lpmcfg.b.hsic_connect; ++} ++ ++void dwc_otg_set_hsic_connect(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ lpmcfg.b.hsic_connect = val; ++ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); ++} ++ ++uint32_t dwc_otg_get_inv_sel_hsic(dwc_otg_core_if_t * core_if) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ return lpmcfg.b.inv_sel_hsic; ++ ++} ++ ++void dwc_otg_set_inv_sel_hsic(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ lpmcfg.b.inv_sel_hsic = val; ++ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); ++} ++ ++uint32_t dwc_otg_get_gotgctl(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++} ++ ++void dwc_otg_set_gotgctl(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, val); ++} ++ ++uint32_t dwc_otg_get_gusbcfg(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++} ++ ++void dwc_otg_set_gusbcfg(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, val); ++} ++ ++uint32_t dwc_otg_get_grxfsiz(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); ++} ++ ++void dwc_otg_set_grxfsiz(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ DWC_WRITE_REG32(&core_if->core_global_regs->grxfsiz, val); ++} ++ ++uint32_t dwc_otg_get_gnptxfsiz(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz); ++} ++ ++void dwc_otg_set_gnptxfsiz(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gnptxfsiz, val); ++} ++ ++uint32_t dwc_otg_get_gpvndctl(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(&core_if->core_global_regs->gpvndctl); ++} ++ ++void dwc_otg_set_gpvndctl(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gpvndctl, val); ++} ++ ++uint32_t dwc_otg_get_ggpio(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(&core_if->core_global_regs->ggpio); ++} ++ ++void dwc_otg_set_ggpio(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, val); ++} ++ ++uint32_t dwc_otg_get_hprt0(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(core_if->host_if->hprt0); ++ ++} ++ ++void dwc_otg_set_hprt0(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ DWC_WRITE_REG32(core_if->host_if->hprt0, val); ++} ++ ++uint32_t dwc_otg_get_guid(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(&core_if->core_global_regs->guid); ++} ++ ++void dwc_otg_set_guid(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ DWC_WRITE_REG32(&core_if->core_global_regs->guid, val); ++} ++ ++uint32_t dwc_otg_get_hptxfsiz(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz); ++} ++ ++uint16_t dwc_otg_get_otg_version(dwc_otg_core_if_t * core_if) ++{ ++ return ((core_if->otg_ver == 1) ? (uint16_t)0x0200 : (uint16_t)0x0103); ++} ++ ++/** ++ * Start the SRP timer to detect when the SRP does not complete within ++ * 6 seconds. ++ * ++ * @param core_if the pointer to core_if strucure. ++ */ ++void dwc_otg_pcd_start_srp_timer(dwc_otg_core_if_t * core_if) ++{ ++ core_if->srp_timer_started = 1; ++ DWC_TIMER_SCHEDULE(core_if->srp_timer, 6000 /* 6 secs */ ); ++} ++ ++void dwc_otg_initiate_srp(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t *addr = (uint32_t *) & (core_if->core_global_regs->gotgctl); ++ gotgctl_data_t mem; ++ gotgctl_data_t val; ++ ++ val.d32 = DWC_READ_REG32(addr); ++ if (val.b.sesreq) { ++ DWC_ERROR("Session Request Already active!\n"); ++ return; ++ } ++ ++ DWC_INFO("Session Request Initated\n"); //NOTICE ++ mem.d32 = DWC_READ_REG32(addr); ++ mem.b.sesreq = 1; ++ DWC_WRITE_REG32(addr, mem.d32); ++ ++ /* Start the SRP timer */ ++ dwc_otg_pcd_start_srp_timer(core_if); ++ return; ++} +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_cil.h +@@ -0,0 +1,1464 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.h $ ++ * $Revision: #123 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#if !defined(__DWC_CIL_H__) ++#define __DWC_CIL_H__ ++ ++#include "dwc_list.h" ++#include "dwc_otg_dbg.h" ++#include "dwc_otg_regs.h" ++ ++#include "dwc_otg_core_if.h" ++#include "dwc_otg_adp.h" ++ ++/** ++ * @file ++ * This file contains the interface to the Core Interface Layer. ++ */ ++ ++#ifdef DWC_UTE_CFI ++ ++#define MAX_DMA_DESCS_PER_EP 256 ++ ++/** ++ * Enumeration for the data buffer mode ++ */ ++typedef enum _data_buffer_mode { ++ BM_STANDARD = 0, /* data buffer is in normal mode */ ++ BM_SG = 1, /* data buffer uses the scatter/gather mode */ ++ BM_CONCAT = 2, /* data buffer uses the concatenation mode */ ++ BM_CIRCULAR = 3, /* data buffer uses the circular DMA mode */ ++ BM_ALIGN = 4 /* data buffer is in buffer alignment mode */ ++} data_buffer_mode_e; ++#endif //DWC_UTE_CFI ++ ++/** Macros defined for DWC OTG HW Release version */ ++ ++#define OTG_CORE_REV_2_60a 0x4F54260A ++#define OTG_CORE_REV_2_71a 0x4F54271A ++#define OTG_CORE_REV_2_72a 0x4F54272A ++#define OTG_CORE_REV_2_80a 0x4F54280A ++#define OTG_CORE_REV_2_81a 0x4F54281A ++#define OTG_CORE_REV_2_90a 0x4F54290A ++#define OTG_CORE_REV_2_91a 0x4F54291A ++#define OTG_CORE_REV_2_92a 0x4F54292A ++#define OTG_CORE_REV_2_93a 0x4F54293A ++#define OTG_CORE_REV_2_94a 0x4F54294A ++#define OTG_CORE_REV_3_00a 0x4F54300A ++ ++/** ++ * Information for each ISOC packet. ++ */ ++typedef struct iso_pkt_info { ++ uint32_t offset; ++ uint32_t length; ++ int32_t status; ++} iso_pkt_info_t; ++ ++/** ++ * The <code>dwc_ep</code> structure represents the state of a single ++ * endpoint when acting in device mode. It contains the data items ++ * needed for an endpoint to be activated and transfer packets. ++ */ ++typedef struct dwc_ep { ++ /** EP number used for register address lookup */ ++ uint8_t num; ++ /** EP direction 0 = OUT */ ++ unsigned is_in:1; ++ /** EP active. */ ++ unsigned active:1; ++ ++ /** ++ * Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic ++ * Tx FIFO. If dedicated Tx FIFOs are enabled Tx FIFO # FOR IN EPs*/ ++ unsigned tx_fifo_num:4; ++ /** EP type: 0 - Control, 1 - ISOC, 2 - BULK, 3 - INTR */ ++ unsigned type:2; ++#define DWC_OTG_EP_TYPE_CONTROL 0 ++#define DWC_OTG_EP_TYPE_ISOC 1 ++#define DWC_OTG_EP_TYPE_BULK 2 ++#define DWC_OTG_EP_TYPE_INTR 3 ++ ++ /** DATA start PID for INTR and BULK EP */ ++ unsigned data_pid_start:1; ++ /** Frame (even/odd) for ISOC EP */ ++ unsigned even_odd_frame:1; ++ /** Max Packet bytes */ ++ unsigned maxpacket:11; ++ ++ /** Max Transfer size */ ++ uint32_t maxxfer; ++ ++ /** @name Transfer state */ ++ /** @{ */ ++ ++ /** ++ * Pointer to the beginning of the transfer buffer -- do not modify ++ * during transfer. ++ */ ++ ++ dwc_dma_t dma_addr; ++ ++ dwc_dma_t dma_desc_addr; ++ dwc_otg_dev_dma_desc_t *desc_addr; ++ ++ uint8_t *start_xfer_buff; ++ /** pointer to the transfer buffer */ ++ uint8_t *xfer_buff; ++ /** Number of bytes to transfer */ ++ unsigned xfer_len:19; ++ /** Number of bytes transferred. */ ++ unsigned xfer_count:19; ++ /** Sent ZLP */ ++ unsigned sent_zlp:1; ++ /** Total len for control transfer */ ++ unsigned total_len:19; ++ ++ /** stall clear flag */ ++ unsigned stall_clear_flag:1; ++ ++ /** SETUP pkt cnt rollover flag for EP0 out*/ ++ unsigned stp_rollover; ++ ++#ifdef DWC_UTE_CFI ++ /* The buffer mode */ ++ data_buffer_mode_e buff_mode; ++ ++ /* The chain of DMA descriptors. ++ * MAX_DMA_DESCS_PER_EP will be allocated for each active EP. ++ */ ++ dwc_otg_dma_desc_t *descs; ++ ++ /* The DMA address of the descriptors chain start */ ++ dma_addr_t descs_dma_addr; ++ /** This variable stores the length of the last enqueued request */ ++ uint32_t cfi_req_len; ++#endif //DWC_UTE_CFI ++ ++/** Max DMA Descriptor count for any EP */ ++#define MAX_DMA_DESC_CNT 256 ++ /** Allocated DMA Desc count */ ++ uint32_t desc_cnt; ++ ++ /** bInterval */ ++ uint32_t bInterval; ++ /** Next frame num to setup next ISOC transfer */ ++ uint32_t frame_num; ++ /** Indicates SOF number overrun in DSTS */ ++ uint8_t frm_overrun; ++ ++#ifdef DWC_UTE_PER_IO ++ /** Next frame num for which will be setup DMA Desc */ ++ uint32_t xiso_frame_num; ++ /** bInterval */ ++ uint32_t xiso_bInterval; ++ /** Count of currently active transfers - shall be either 0 or 1 */ ++ int xiso_active_xfers; ++ int xiso_queued_xfers; ++#endif ++#ifdef DWC_EN_ISOC ++ /** ++ * Variables specific for ISOC EPs ++ * ++ */ ++ /** DMA addresses of ISOC buffers */ ++ dwc_dma_t dma_addr0; ++ dwc_dma_t dma_addr1; ++ ++ dwc_dma_t iso_dma_desc_addr; ++ dwc_otg_dev_dma_desc_t *iso_desc_addr; ++ ++ /** pointer to the transfer buffers */ ++ uint8_t *xfer_buff0; ++ uint8_t *xfer_buff1; ++ ++ /** number of ISOC Buffer is processing */ ++ uint32_t proc_buf_num; ++ /** Interval of ISOC Buffer processing */ ++ uint32_t buf_proc_intrvl; ++ /** Data size for regular frame */ ++ uint32_t data_per_frame; ++ ++ /* todo - pattern data support is to be implemented in the future */ ++ /** Data size for pattern frame */ ++ uint32_t data_pattern_frame; ++ /** Frame number of pattern data */ ++ uint32_t sync_frame; ++ ++ /** bInterval */ ++ uint32_t bInterval; ++ /** ISO Packet number per frame */ ++ uint32_t pkt_per_frm; ++ /** Next frame num for which will be setup DMA Desc */ ++ uint32_t next_frame; ++ /** Number of packets per buffer processing */ ++ uint32_t pkt_cnt; ++ /** Info for all isoc packets */ ++ iso_pkt_info_t *pkt_info; ++ /** current pkt number */ ++ uint32_t cur_pkt; ++ /** current pkt number */ ++ uint8_t *cur_pkt_addr; ++ /** current pkt number */ ++ uint32_t cur_pkt_dma_addr; ++#endif /* DWC_EN_ISOC */ ++ ++/** @} */ ++} dwc_ep_t; ++ ++/* ++ * Reasons for halting a host channel. ++ */ ++typedef enum dwc_otg_halt_status { ++ DWC_OTG_HC_XFER_NO_HALT_STATUS, ++ DWC_OTG_HC_XFER_COMPLETE, ++ DWC_OTG_HC_XFER_URB_COMPLETE, ++ DWC_OTG_HC_XFER_ACK, ++ DWC_OTG_HC_XFER_NAK, ++ DWC_OTG_HC_XFER_NYET, ++ DWC_OTG_HC_XFER_STALL, ++ DWC_OTG_HC_XFER_XACT_ERR, ++ DWC_OTG_HC_XFER_FRAME_OVERRUN, ++ DWC_OTG_HC_XFER_BABBLE_ERR, ++ DWC_OTG_HC_XFER_DATA_TOGGLE_ERR, ++ DWC_OTG_HC_XFER_AHB_ERR, ++ DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE, ++ DWC_OTG_HC_XFER_URB_DEQUEUE ++} dwc_otg_halt_status_e; ++ ++/** ++ * Host channel descriptor. This structure represents the state of a single ++ * host channel when acting in host mode. It contains the data items needed to ++ * transfer packets to an endpoint via a host channel. ++ */ ++typedef struct dwc_hc { ++ /** Host channel number used for register address lookup */ ++ uint8_t hc_num; ++ ++ /** Device to access */ ++ unsigned dev_addr:7; ++ ++ /** EP to access */ ++ unsigned ep_num:4; ++ ++ /** EP direction. 0: OUT, 1: IN */ ++ unsigned ep_is_in:1; ++ ++ /** ++ * EP speed. ++ * One of the following values: ++ * - DWC_OTG_EP_SPEED_LOW ++ * - DWC_OTG_EP_SPEED_FULL ++ * - DWC_OTG_EP_SPEED_HIGH ++ */ ++ unsigned speed:2; ++#define DWC_OTG_EP_SPEED_LOW 0 ++#define DWC_OTG_EP_SPEED_FULL 1 ++#define DWC_OTG_EP_SPEED_HIGH 2 ++ ++ /** ++ * Endpoint type. ++ * One of the following values: ++ * - DWC_OTG_EP_TYPE_CONTROL: 0 ++ * - DWC_OTG_EP_TYPE_ISOC: 1 ++ * - DWC_OTG_EP_TYPE_BULK: 2 ++ * - DWC_OTG_EP_TYPE_INTR: 3 ++ */ ++ unsigned ep_type:2; ++ ++ /** Max packet size in bytes */ ++ unsigned max_packet:11; ++ ++ /** ++ * PID for initial transaction. ++ * 0: DATA0,<br> ++ * 1: DATA2,<br> ++ * 2: DATA1,<br> ++ * 3: MDATA (non-Control EP), ++ * SETUP (Control EP) ++ */ ++ unsigned data_pid_start:2; ++#define DWC_OTG_HC_PID_DATA0 0 ++#define DWC_OTG_HC_PID_DATA2 1 ++#define DWC_OTG_HC_PID_DATA1 2 ++#define DWC_OTG_HC_PID_MDATA 3 ++#define DWC_OTG_HC_PID_SETUP 3 ++ ++ /** Number of periodic transactions per (micro)frame */ ++ unsigned multi_count:2; ++ ++ /** @name Transfer State */ ++ /** @{ */ ++ ++ /** Pointer to the current transfer buffer position. */ ++ uint8_t *xfer_buff; ++ /** ++ * In Buffer DMA mode this buffer will be used ++ * if xfer_buff is not DWORD aligned. ++ */ ++ dwc_dma_t align_buff; ++ /** Total number of bytes to transfer. */ ++ uint32_t xfer_len; ++ /** Number of bytes transferred so far. */ ++ uint32_t xfer_count; ++ /** Packet count at start of transfer.*/ ++ uint16_t start_pkt_count; ++ ++ /** ++ * Flag to indicate whether the transfer has been started. Set to 1 if ++ * it has been started, 0 otherwise. ++ */ ++ uint8_t xfer_started; ++ ++ /** ++ * Set to 1 to indicate that a PING request should be issued on this ++ * channel. If 0, process normally. ++ */ ++ uint8_t do_ping; ++ ++ /** ++ * Set to 1 to indicate that the error count for this transaction is ++ * non-zero. Set to 0 if the error count is 0. ++ */ ++ uint8_t error_state; ++ ++ /** ++ * Set to 1 to indicate that this channel should be halted the next ++ * time a request is queued for the channel. This is necessary in ++ * slave mode if no request queue space is available when an attempt ++ * is made to halt the channel. ++ */ ++ uint8_t halt_on_queue; ++ ++ /** ++ * Set to 1 if the host channel has been halted, but the core is not ++ * finished flushing queued requests. Otherwise 0. ++ */ ++ uint8_t halt_pending; ++ ++ /** ++ * Reason for halting the host channel. ++ */ ++ dwc_otg_halt_status_e halt_status; ++ ++ /* ++ * Split settings for the host channel ++ */ ++ uint8_t do_split; /**< Enable split for the channel */ ++ uint8_t complete_split; /**< Enable complete split */ ++ uint8_t hub_addr; /**< Address of high speed hub */ ++ ++ uint8_t port_addr; /**< Port of the low/full speed device */ ++ /** Split transaction position ++ * One of the following values: ++ * - DWC_HCSPLIT_XACTPOS_MID ++ * - DWC_HCSPLIT_XACTPOS_BEGIN ++ * - DWC_HCSPLIT_XACTPOS_END ++ * - DWC_HCSPLIT_XACTPOS_ALL */ ++ uint8_t xact_pos; ++ ++ /** Set when the host channel does a short read. */ ++ uint8_t short_read; ++ ++ /** ++ * Number of requests issued for this channel since it was assigned to ++ * the current transfer (not counting PINGs). ++ */ ++ uint8_t requests; ++ ++ /** ++ * Queue Head for the transfer being processed by this channel. ++ */ ++ struct dwc_otg_qh *qh; ++ ++ /** @} */ ++ ++ /** Entry in list of host channels. */ ++ DWC_CIRCLEQ_ENTRY(dwc_hc) hc_list_entry; ++ ++ /** @name Descriptor DMA support */ ++ /** @{ */ ++ ++ /** Number of Transfer Descriptors */ ++ uint16_t ntd; ++ ++ /** Descriptor List DMA address */ ++ dwc_dma_t desc_list_addr; ++ ++ /** Scheduling micro-frame bitmap. */ ++ uint8_t schinfo; ++ ++ /** @} */ ++} dwc_hc_t; ++ ++/** ++ * The following parameters may be specified when starting the module. These ++ * parameters define how the DWC_otg controller should be configured. ++ */ ++typedef struct dwc_otg_core_params { ++ int32_t opt; ++ ++ /** ++ * Specifies the OTG capabilities. The driver will automatically ++ * detect the value for this parameter if none is specified. ++ * 0 - HNP and SRP capable (default) ++ * 1 - SRP Only capable ++ * 2 - No HNP/SRP capable ++ */ ++ int32_t otg_cap; ++ ++ /** ++ * Specifies whether to use slave or DMA mode for accessing the data ++ * FIFOs. The driver will automatically detect the value for this ++ * parameter if none is specified. ++ * 0 - Slave ++ * 1 - DMA (default, if available) ++ */ ++ int32_t dma_enable; ++ ++ /** ++ * When DMA mode is enabled specifies whether to use address DMA or DMA ++ * Descriptor mode for accessing the data FIFOs in device mode. The driver ++ * will automatically detect the value for this if none is specified. ++ * 0 - address DMA ++ * 1 - DMA Descriptor(default, if available) ++ */ ++ int32_t dma_desc_enable; ++ /** The DMA Burst size (applicable only for External DMA ++ * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32) ++ */ ++ int32_t dma_burst_size; /* Translate this to GAHBCFG values */ ++ ++ /** ++ * Specifies the maximum speed of operation in host and device mode. ++ * The actual speed depends on the speed of the attached device and ++ * the value of phy_type. The actual speed depends on the speed of the ++ * attached device. ++ * 0 - High Speed (default) ++ * 1 - Full Speed ++ */ ++ int32_t speed; ++ /** Specifies whether low power mode is supported when attached ++ * to a Full Speed or Low Speed device in host mode. ++ * 0 - Don't support low power mode (default) ++ * 1 - Support low power mode ++ */ ++ int32_t host_support_fs_ls_low_power; ++ ++ /** Specifies the PHY clock rate in low power mode when connected to a ++ * Low Speed device in host mode. This parameter is applicable only if ++ * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS ++ * then defaults to 6 MHZ otherwise 48 MHZ. ++ * ++ * 0 - 48 MHz ++ * 1 - 6 MHz ++ */ ++ int32_t host_ls_low_power_phy_clk; ++ ++ /** ++ * 0 - Use cC FIFO size parameters ++ * 1 - Allow dynamic FIFO sizing (default) ++ */ ++ int32_t enable_dynamic_fifo; ++ ++ /** Total number of 4-byte words in the data FIFO memory. This ++ * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic ++ * Tx FIFOs. ++ * 32 to 32768 (default 8192) ++ * Note: The total FIFO memory depth in the FPGA configuration is 8192. ++ */ ++ int32_t data_fifo_size; ++ ++ /** Number of 4-byte words in the Rx FIFO in device mode when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1064) ++ */ ++ int32_t dev_rx_fifo_size; ++ ++ /** Number of 4-byte words in the non-periodic Tx FIFO in device mode ++ * when dynamic FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++ int32_t dev_nperio_tx_fifo_size; ++ ++ /** Number of 4-byte words in each of the periodic Tx FIFOs in device ++ * mode when dynamic FIFO sizing is enabled. ++ * 4 to 768 (default 256) ++ */ ++ uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS]; ++ ++ /** Number of 4-byte words in the Rx FIFO in host mode when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++ int32_t host_rx_fifo_size; ++ ++ /** Number of 4-byte words in the non-periodic Tx FIFO in host mode ++ * when Dynamic FIFO sizing is enabled in the core. ++ * 16 to 32768 (default 1024) ++ */ ++ int32_t host_nperio_tx_fifo_size; ++ ++ /** Number of 4-byte words in the host periodic Tx FIFO when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++ int32_t host_perio_tx_fifo_size; ++ ++ /** The maximum transfer size supported in bytes. ++ * 2047 to 65,535 (default 65,535) ++ */ ++ int32_t max_transfer_size; ++ ++ /** The maximum number of packets in a transfer. ++ * 15 to 511 (default 511) ++ */ ++ int32_t max_packet_count; ++ ++ /** The number of host channel registers to use. ++ * 1 to 16 (default 12) ++ * Note: The FPGA configuration supports a maximum of 12 host channels. ++ */ ++ int32_t host_channels; ++ ++ /** The number of endpoints in addition to EP0 available for device ++ * mode operations. ++ * 1 to 15 (default 6 IN and OUT) ++ * Note: The FPGA configuration supports a maximum of 6 IN and OUT ++ * endpoints in addition to EP0. ++ */ ++ int32_t dev_endpoints; ++ ++ /** ++ * Specifies the type of PHY interface to use. By default, the driver ++ * will automatically detect the phy_type. ++ * ++ * 0 - Full Speed PHY ++ * 1 - UTMI+ (default) ++ * 2 - ULPI ++ */ ++ int32_t phy_type; ++ ++ /** ++ * Specifies the UTMI+ Data Width. This parameter is ++ * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI ++ * PHY_TYPE, this parameter indicates the data width between ++ * the MAC and the ULPI Wrapper.) Also, this parameter is ++ * applicable only if the OTG_HSPHY_WIDTH cC parameter was set ++ * to "8 and 16 bits", meaning that the core has been ++ * configured to work at either data path width. ++ * ++ * 8 or 16 bits (default 16) ++ */ ++ int32_t phy_utmi_width; ++ ++ /** ++ * Specifies whether the ULPI operates at double or single ++ * data rate. This parameter is only applicable if PHY_TYPE is ++ * ULPI. ++ * ++ * 0 - single data rate ULPI interface with 8 bit wide data ++ * bus (default) ++ * 1 - double data rate ULPI interface with 4 bit wide data ++ * bus ++ */ ++ int32_t phy_ulpi_ddr; ++ ++ /** ++ * Specifies whether to use the internal or external supply to ++ * drive the vbus with a ULPI phy. ++ */ ++ int32_t phy_ulpi_ext_vbus; ++ ++ /** ++ * Specifies whether to use the I2Cinterface for full speed PHY. This ++ * parameter is only applicable if PHY_TYPE is FS. ++ * 0 - No (default) ++ * 1 - Yes ++ */ ++ int32_t i2c_enable; ++ ++ int32_t ulpi_fs_ls; ++ ++ int32_t ts_dline; ++ ++ /** ++ * Specifies whether dedicated transmit FIFOs are ++ * enabled for non periodic IN endpoints in device mode ++ * 0 - No ++ * 1 - Yes ++ */ ++ int32_t en_multiple_tx_fifo; ++ ++ /** Number of 4-byte words in each of the Tx FIFOs in device ++ * mode when dynamic FIFO sizing is enabled. ++ * 4 to 768 (default 256) ++ */ ++ uint32_t dev_tx_fifo_size[MAX_TX_FIFOS]; ++ ++ /** Thresholding enable flag- ++ * bit 0 - enable non-ISO Tx thresholding ++ * bit 1 - enable ISO Tx thresholding ++ * bit 2 - enable Rx thresholding ++ */ ++ uint32_t thr_ctl; ++ ++ /** Thresholding length for Tx ++ * FIFOs in 32 bit DWORDs ++ */ ++ uint32_t tx_thr_length; ++ ++ /** Thresholding length for Rx ++ * FIFOs in 32 bit DWORDs ++ */ ++ uint32_t rx_thr_length; ++ ++ /** ++ * Specifies whether LPM (Link Power Management) support is enabled ++ */ ++ int32_t lpm_enable; ++ ++ /** Per Transfer Interrupt ++ * mode enable flag ++ * 1 - Enabled ++ * 0 - Disabled ++ */ ++ int32_t pti_enable; ++ ++ /** Multi Processor Interrupt ++ * mode enable flag ++ * 1 - Enabled ++ * 0 - Disabled ++ */ ++ int32_t mpi_enable; ++ ++ /** IS_USB Capability ++ * 1 - Enabled ++ * 0 - Disabled ++ */ ++ int32_t ic_usb_cap; ++ ++ /** AHB Threshold Ratio ++ * 2'b00 AHB Threshold = MAC Threshold ++ * 2'b01 AHB Threshold = 1/2 MAC Threshold ++ * 2'b10 AHB Threshold = 1/4 MAC Threshold ++ * 2'b11 AHB Threshold = 1/8 MAC Threshold ++ */ ++ int32_t ahb_thr_ratio; ++ ++ /** ADP Support ++ * 1 - Enabled ++ * 0 - Disabled ++ */ ++ int32_t adp_supp_enable; ++ ++ /** HFIR Reload Control ++ * 0 - The HFIR cannot be reloaded dynamically. ++ * 1 - Allow dynamic reloading of the HFIR register during runtime. ++ */ ++ int32_t reload_ctl; ++ ++ /** DCFG: Enable device Out NAK ++ * 0 - The core does not set NAK after Bulk Out transfer complete. ++ * 1 - The core sets NAK after Bulk OUT transfer complete. ++ */ ++ int32_t dev_out_nak; ++ ++ /** DCFG: Enable Continue on BNA ++ * After receiving BNA interrupt the core disables the endpoint,when the ++ * endpoint is re-enabled by the application the core starts processing ++ * 0 - from the DOEPDMA descriptor ++ * 1 - from the descriptor which received the BNA. ++ */ ++ int32_t cont_on_bna; ++ ++ /** GAHBCFG: AHB Single Support ++ * This bit when programmed supports SINGLE transfers for remainder ++ * data in a transfer for DMA mode of operation. ++ * 0 - in this case the remainder data will be sent using INCR burst size. ++ * 1 - in this case the remainder data will be sent using SINGLE burst size. ++ */ ++ int32_t ahb_single; ++ ++ /** Core Power down mode ++ * 0 - No Power Down is enabled ++ * 1 - Reserved ++ * 2 - Complete Power Down (Hibernation) ++ */ ++ int32_t power_down; ++ ++ /** OTG revision supported ++ * 0 - OTG 1.3 revision ++ * 1 - OTG 2.0 revision ++ */ ++ int32_t otg_ver; ++ ++} dwc_otg_core_params_t; ++ ++#ifdef DEBUG ++struct dwc_otg_core_if; ++typedef struct hc_xfer_info { ++ struct dwc_otg_core_if *core_if; ++ dwc_hc_t *hc; ++} hc_xfer_info_t; ++#endif ++ ++typedef struct ep_xfer_info { ++ struct dwc_otg_core_if *core_if; ++ dwc_ep_t *ep; ++ uint8_t state; ++} ep_xfer_info_t; ++/* ++ * Device States ++ */ ++typedef enum dwc_otg_lx_state { ++ /** On state */ ++ DWC_OTG_L0, ++ /** LPM sleep state*/ ++ DWC_OTG_L1, ++ /** USB suspend state*/ ++ DWC_OTG_L2, ++ /** Off state*/ ++ DWC_OTG_L3 ++} dwc_otg_lx_state_e; ++ ++struct dwc_otg_global_regs_backup { ++ uint32_t gotgctl_local; ++ uint32_t gintmsk_local; ++ uint32_t gahbcfg_local; ++ uint32_t gusbcfg_local; ++ uint32_t grxfsiz_local; ++ uint32_t gnptxfsiz_local; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ uint32_t glpmcfg_local; ++#endif ++ uint32_t gi2cctl_local; ++ uint32_t hptxfsiz_local; ++ uint32_t pcgcctl_local; ++ uint32_t gdfifocfg_local; ++ uint32_t dtxfsiz_local[MAX_EPS_CHANNELS]; ++ uint32_t gpwrdn_local; ++ uint32_t xhib_pcgcctl; ++ uint32_t xhib_gpwrdn; ++}; ++ ++struct dwc_otg_host_regs_backup { ++ uint32_t hcfg_local; ++ uint32_t haintmsk_local; ++ uint32_t hcintmsk_local[MAX_EPS_CHANNELS]; ++ uint32_t hprt0_local; ++ uint32_t hfir_local; ++}; ++ ++struct dwc_otg_dev_regs_backup { ++ uint32_t dcfg; ++ uint32_t dctl; ++ uint32_t daintmsk; ++ uint32_t diepmsk; ++ uint32_t doepmsk; ++ uint32_t diepctl[MAX_EPS_CHANNELS]; ++ uint32_t dieptsiz[MAX_EPS_CHANNELS]; ++ uint32_t diepdma[MAX_EPS_CHANNELS]; ++}; ++/** ++ * The <code>dwc_otg_core_if</code> structure contains information needed to manage ++ * the DWC_otg controller acting in either host or device mode. It ++ * represents the programming view of the controller as a whole. ++ */ ++struct dwc_otg_core_if { ++ /** Parameters that define how the core should be configured.*/ ++ dwc_otg_core_params_t *core_params; ++ ++ /** Core Global registers starting at offset 000h. */ ++ dwc_otg_core_global_regs_t *core_global_regs; ++ ++ /** Device-specific information */ ++ dwc_otg_dev_if_t *dev_if; ++ /** Host-specific information */ ++ dwc_otg_host_if_t *host_if; ++ ++ /** Value from SNPSID register */ ++ uint32_t snpsid; ++ ++ /* ++ * Set to 1 if the core PHY interface bits in USBCFG have been ++ * initialized. ++ */ ++ uint8_t phy_init_done; ++ ++ /* ++ * SRP Success flag, set by srp success interrupt in FS I2C mode ++ */ ++ uint8_t srp_success; ++ uint8_t srp_timer_started; ++ /** Timer for SRP. If it expires before SRP is successful ++ * clear the SRP. */ ++ dwc_timer_t *srp_timer; ++ ++#ifdef DWC_DEV_SRPCAP ++ /* This timer is needed to power on the hibernated host core if SRP is not ++ * initiated on connected SRP capable device for limited period of time ++ */ ++ uint8_t pwron_timer_started; ++ dwc_timer_t *pwron_timer; ++#endif ++ /* Common configuration information */ ++ /** Power and Clock Gating Control Register */ ++ volatile uint32_t *pcgcctl; ++#define DWC_OTG_PCGCCTL_OFFSET 0xE00 ++ ++ /** Push/pop addresses for endpoints or host channels.*/ ++ uint32_t *data_fifo[MAX_EPS_CHANNELS]; ++#define DWC_OTG_DATA_FIFO_OFFSET 0x1000 ++#define DWC_OTG_DATA_FIFO_SIZE 0x1000 ++ ++ /** Total RAM for FIFOs (Bytes) */ ++ uint16_t total_fifo_size; ++ /** Size of Rx FIFO (Bytes) */ ++ uint16_t rx_fifo_size; ++ /** Size of Non-periodic Tx FIFO (Bytes) */ ++ uint16_t nperio_tx_fifo_size; ++ ++ /** 1 if DMA is enabled, 0 otherwise. */ ++ uint8_t dma_enable; ++ ++ /** 1 if DMA descriptor is enabled, 0 otherwise. */ ++ uint8_t dma_desc_enable; ++ ++ /** 1 if PTI Enhancement mode is enabled, 0 otherwise. */ ++ uint8_t pti_enh_enable; ++ ++ /** 1 if MPI Enhancement mode is enabled, 0 otherwise. */ ++ uint8_t multiproc_int_enable; ++ ++ /** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */ ++ uint8_t en_multiple_tx_fifo; ++ ++ /** Set to 1 if multiple packets of a high-bandwidth transfer is in ++ * process of being queued */ ++ uint8_t queuing_high_bandwidth; ++ ++ /** Hardware Configuration -- stored here for convenience.*/ ++ hwcfg1_data_t hwcfg1; ++ hwcfg2_data_t hwcfg2; ++ hwcfg3_data_t hwcfg3; ++ hwcfg4_data_t hwcfg4; ++ fifosize_data_t hptxfsiz; ++ ++ /** Host and Device Configuration -- stored here for convenience.*/ ++ hcfg_data_t hcfg; ++ dcfg_data_t dcfg; ++ ++ /** The operational State, during transations ++ * (a_host>>a_peripherial and b_device=>b_host) this may not ++ * match the core but allows the software to determine ++ * transitions. ++ */ ++ uint8_t op_state; ++ ++ /** ++ * Set to 1 if the HCD needs to be restarted on a session request ++ * interrupt. This is required if no connector ID status change has ++ * occurred since the HCD was last disconnected. ++ */ ++ uint8_t restart_hcd_on_session_req; ++ ++ /** HCD callbacks */ ++ /** A-Device is a_host */ ++#define A_HOST (1) ++ /** A-Device is a_suspend */ ++#define A_SUSPEND (2) ++ /** A-Device is a_peripherial */ ++#define A_PERIPHERAL (3) ++ /** B-Device is operating as a Peripheral. */ ++#define B_PERIPHERAL (4) ++ /** B-Device is operating as a Host. */ ++#define B_HOST (5) ++ ++ /** HCD callbacks */ ++ struct dwc_otg_cil_callbacks *hcd_cb; ++ /** PCD callbacks */ ++ struct dwc_otg_cil_callbacks *pcd_cb; ++ ++ /** Device mode Periodic Tx FIFO Mask */ ++ uint32_t p_tx_msk; ++ /** Device mode Periodic Tx FIFO Mask */ ++ uint32_t tx_msk; ++ ++ /** Workqueue object used for handling several interrupts */ ++ dwc_workq_t *wq_otg; ++ ++ /** Timer object used for handling "Wakeup Detected" Interrupt */ ++ dwc_timer_t *wkp_timer; ++ /** This arrays used for debug purposes for DEV OUT NAK enhancement */ ++ uint32_t start_doeptsiz_val[MAX_EPS_CHANNELS]; ++ ep_xfer_info_t ep_xfer_info[MAX_EPS_CHANNELS]; ++ dwc_timer_t *ep_xfer_timer[MAX_EPS_CHANNELS]; ++#ifdef DEBUG ++ uint32_t start_hcchar_val[MAX_EPS_CHANNELS]; ++ ++ hc_xfer_info_t hc_xfer_info[MAX_EPS_CHANNELS]; ++ dwc_timer_t *hc_xfer_timer[MAX_EPS_CHANNELS]; ++ ++ uint32_t hfnum_7_samples; ++ uint64_t hfnum_7_frrem_accum; ++ uint32_t hfnum_0_samples; ++ uint64_t hfnum_0_frrem_accum; ++ uint32_t hfnum_other_samples; ++ uint64_t hfnum_other_frrem_accum; ++#endif ++ ++#ifdef DWC_UTE_CFI ++ uint16_t pwron_rxfsiz; ++ uint16_t pwron_gnptxfsiz; ++ uint16_t pwron_txfsiz[15]; ++ ++ uint16_t init_rxfsiz; ++ uint16_t init_gnptxfsiz; ++ uint16_t init_txfsiz[15]; ++#endif ++ ++ /** Lx state of device */ ++ dwc_otg_lx_state_e lx_state; ++ ++ /** Saved Core Global registers */ ++ struct dwc_otg_global_regs_backup *gr_backup; ++ /** Saved Host registers */ ++ struct dwc_otg_host_regs_backup *hr_backup; ++ /** Saved Device registers */ ++ struct dwc_otg_dev_regs_backup *dr_backup; ++ ++ /** Power Down Enable */ ++ uint32_t power_down; ++ ++ /** ADP support Enable */ ++ uint32_t adp_enable; ++ ++ /** ADP structure object */ ++ dwc_otg_adp_t adp; ++ ++ /** hibernation/suspend flag */ ++ int hibernation_suspend; ++ ++ /** Device mode extended hibernation flag */ ++ int xhib; ++ ++ /** OTG revision supported */ ++ uint32_t otg_ver; ++ ++ /** OTG status flag used for HNP polling */ ++ uint8_t otg_sts; ++ ++ /** Pointer to either hcd->lock or pcd->lock */ ++ dwc_spinlock_t *lock; ++ ++ /** Start predict NextEP based on Learning Queue if equal 1, ++ * also used as counter of disabled NP IN EP's */ ++ uint8_t start_predict; ++ ++ /** NextEp sequence, including EP0: nextep_seq[] = EP if non-periodic and ++ * active, 0xff otherwise */ ++ uint8_t nextep_seq[MAX_EPS_CHANNELS]; ++ ++ /** Index of fisrt EP in nextep_seq array which should be re-enabled **/ ++ uint8_t first_in_nextep_seq; ++ ++ /** Frame number while entering to ISR - needed for ISOCs **/ ++ uint32_t frame_num; ++ ++}; ++ ++#ifdef DEBUG ++/* ++ * This function is called when transfer is timed out. ++ */ ++extern void hc_xfer_timeout(void *ptr); ++#endif ++ ++/* ++ * This function is called when transfer is timed out on endpoint. ++ */ ++extern void ep_xfer_timeout(void *ptr); ++ ++/* ++ * The following functions are functions for works ++ * using during handling some interrupts ++ */ ++extern void w_conn_id_status_change(void *p); ++ ++extern void w_wakeup_detected(void *p); ++ ++/** Saves global register values into system memory. */ ++extern int dwc_otg_save_global_regs(dwc_otg_core_if_t * core_if); ++/** Saves device register values into system memory. */ ++extern int dwc_otg_save_dev_regs(dwc_otg_core_if_t * core_if); ++/** Saves host register values into system memory. */ ++extern int dwc_otg_save_host_regs(dwc_otg_core_if_t * core_if); ++/** Restore global register values. */ ++extern int dwc_otg_restore_global_regs(dwc_otg_core_if_t * core_if); ++/** Restore host register values. */ ++extern int dwc_otg_restore_host_regs(dwc_otg_core_if_t * core_if, int reset); ++/** Restore device register values. */ ++extern int dwc_otg_restore_dev_regs(dwc_otg_core_if_t * core_if, ++ int rem_wakeup); ++extern int restore_lpm_i2c_regs(dwc_otg_core_if_t * core_if); ++extern int restore_essential_regs(dwc_otg_core_if_t * core_if, int rmode, ++ int is_host); ++ ++extern int dwc_otg_host_hibernation_restore(dwc_otg_core_if_t * core_if, ++ int restore_mode, int reset); ++extern int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if, ++ int rem_wakeup, int reset); ++ ++/* ++ * The following functions support initialization of the CIL driver component ++ * and the DWC_otg controller. ++ */ ++extern void dwc_otg_core_host_init(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_core_dev_init(dwc_otg_core_if_t * _core_if); ++ ++/** @name Device CIL Functions ++ * The following functions support managing the DWC_otg controller in device ++ * mode. ++ */ ++/**@{*/ ++extern void dwc_otg_wakeup(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_read_setup_packet(dwc_otg_core_if_t * _core_if, ++ uint32_t * _dest); ++extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_ep0_activate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); ++extern void dwc_otg_ep_activate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); ++extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); ++extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t * _core_if, ++ dwc_ep_t * _ep); ++extern void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t * _core_if, ++ dwc_ep_t * _ep); ++extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t * _core_if, ++ dwc_ep_t * _ep); ++extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t * _core_if, ++ dwc_ep_t * _ep); ++extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t * _core_if, ++ dwc_ep_t * _ep, int _dma); ++extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); ++extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t * _core_if, ++ dwc_ep_t * _ep); ++extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t * _core_if); ++ ++#ifdef DWC_EN_ISOC ++extern void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * ep); ++extern void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * ep); ++#endif /* DWC_EN_ISOC */ ++/**@}*/ ++ ++/** @name Host CIL Functions ++ * The following functions support managing the DWC_otg controller in host ++ * mode. ++ */ ++/**@{*/ ++extern void dwc_otg_hc_init(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc); ++extern void dwc_otg_hc_halt(dwc_otg_core_if_t * _core_if, ++ dwc_hc_t * _hc, dwc_otg_halt_status_e _halt_status); ++extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc); ++extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t * _core_if, ++ dwc_hc_t * _hc); ++extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t * _core_if, ++ dwc_hc_t * _hc); ++extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc); ++extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t * _core_if, ++ dwc_hc_t * _hc); ++extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t * _core_if); ++ ++extern void dwc_otg_hc_start_transfer_ddma(dwc_otg_core_if_t * core_if, ++ dwc_hc_t * hc); ++ ++extern uint32_t calc_frame_interval(dwc_otg_core_if_t * core_if); ++ ++/* Macro used to clear one channel interrupt */ ++#define clear_hc_int(_hc_regs_, _intr_) \ ++do { \ ++ hcint_data_t hcint_clear = {.d32 = 0}; \ ++ hcint_clear.b._intr_ = 1; \ ++ DWC_WRITE_REG32(&(_hc_regs_)->hcint, hcint_clear.d32); \ ++} while (0) ++ ++/* ++ * Macro used to disable one channel interrupt. Channel interrupts are ++ * disabled when the channel is halted or released by the interrupt handler. ++ * There is no need to handle further interrupts of that type until the ++ * channel is re-assigned. In fact, subsequent handling may cause crashes ++ * because the channel structures are cleaned up when the channel is released. ++ */ ++#define disable_hc_int(_hc_regs_, _intr_) \ ++do { \ ++ hcintmsk_data_t hcintmsk = {.d32 = 0}; \ ++ hcintmsk.b._intr_ = 1; \ ++ DWC_MODIFY_REG32(&(_hc_regs_)->hcintmsk, hcintmsk.d32, 0); \ ++} while (0) ++ ++/** ++ * This function Reads HPRT0 in preparation to modify. It keeps the ++ * WC bits 0 so that if they are read as 1, they won't clear when you ++ * write it back ++ */ ++static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t * _core_if) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = DWC_READ_REG32(_core_if->host_if->hprt0); ++ hprt0.b.prtena = 0; ++ hprt0.b.prtconndet = 0; ++ hprt0.b.prtenchng = 0; ++ hprt0.b.prtovrcurrchng = 0; ++ return hprt0.d32; ++} ++ ++/**@}*/ ++ ++/** @name Common CIL Functions ++ * The following functions support managing the DWC_otg controller in either ++ * device or host mode. ++ */ ++/**@{*/ ++ ++extern void dwc_otg_read_packet(dwc_otg_core_if_t * core_if, ++ uint8_t * dest, uint16_t bytes); ++ ++extern void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t * _core_if, const int _num); ++extern void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_core_reset(dwc_otg_core_if_t * _core_if); ++ ++/** ++ * This function returns the Core Interrupt register. ++ */ ++static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t * core_if) ++{ ++ return (DWC_READ_REG32(&core_if->core_global_regs->gintsts) & ++ DWC_READ_REG32(&core_if->core_global_regs->gintmsk)); ++} ++ ++/** ++ * This function returns the OTG Interrupt register. ++ */ ++static inline uint32_t dwc_otg_read_otg_intr(dwc_otg_core_if_t * core_if) ++{ ++ return (DWC_READ_REG32(&core_if->core_global_regs->gotgint)); ++} ++ ++/** ++ * This function reads the Device All Endpoints Interrupt register and ++ * returns the IN endpoint interrupt bits. ++ */ ++static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t * ++ core_if) ++{ ++ ++ uint32_t v; ++ ++ if (core_if->multiproc_int_enable) { ++ v = DWC_READ_REG32(&core_if->dev_if-> ++ dev_global_regs->deachint) & ++ DWC_READ_REG32(&core_if-> ++ dev_if->dev_global_regs->deachintmsk); ++ } else { ++ v = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daint) & ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk); ++ } ++ return (v & 0xffff); ++} ++ ++/** ++ * This function reads the Device All Endpoints Interrupt register and ++ * returns the OUT endpoint interrupt bits. ++ */ ++static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t * ++ core_if) ++{ ++ uint32_t v; ++ ++ if (core_if->multiproc_int_enable) { ++ v = DWC_READ_REG32(&core_if->dev_if-> ++ dev_global_regs->deachint) & ++ DWC_READ_REG32(&core_if-> ++ dev_if->dev_global_regs->deachintmsk); ++ } else { ++ v = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daint) & ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk); ++ } ++ ++ return ((v & 0xffff0000) >> 16); ++} ++ ++/** ++ * This function returns the Device IN EP Interrupt register ++ */ ++static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * ep) ++{ ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ uint32_t v, msk, emp; ++ ++ if (core_if->multiproc_int_enable) { ++ msk = ++ DWC_READ_REG32(&dev_if-> ++ dev_global_regs->diepeachintmsk[ep->num]); ++ emp = ++ DWC_READ_REG32(&dev_if-> ++ dev_global_regs->dtknqr4_fifoemptymsk); ++ msk |= ((emp >> ep->num) & 0x1) << 7; ++ v = DWC_READ_REG32(&dev_if->in_ep_regs[ep->num]->diepint) & msk; ++ } else { ++ msk = DWC_READ_REG32(&dev_if->dev_global_regs->diepmsk); ++ emp = ++ DWC_READ_REG32(&dev_if-> ++ dev_global_regs->dtknqr4_fifoemptymsk); ++ msk |= ((emp >> ep->num) & 0x1) << 7; ++ v = DWC_READ_REG32(&dev_if->in_ep_regs[ep->num]->diepint) & msk; ++ } ++ ++ return v; ++} ++ ++/** ++ * This function returns the Device OUT EP Interrupt register ++ */ ++static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t * ++ _core_if, dwc_ep_t * _ep) ++{ ++ dwc_otg_dev_if_t *dev_if = _core_if->dev_if; ++ uint32_t v; ++ doepmsk_data_t msk = {.d32 = 0 }; ++ ++ if (_core_if->multiproc_int_enable) { ++ msk.d32 = ++ DWC_READ_REG32(&dev_if-> ++ dev_global_regs->doepeachintmsk[_ep->num]); ++ if (_core_if->pti_enh_enable) { ++ msk.b.pktdrpsts = 1; ++ } ++ v = DWC_READ_REG32(&dev_if-> ++ out_ep_regs[_ep->num]->doepint) & msk.d32; ++ } else { ++ msk.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->doepmsk); ++ if (_core_if->pti_enh_enable) { ++ msk.b.pktdrpsts = 1; ++ } ++ v = DWC_READ_REG32(&dev_if-> ++ out_ep_regs[_ep->num]->doepint) & msk.d32; ++ } ++ return v; ++} ++ ++/** ++ * This function returns the Host All Channel Interrupt register ++ */ ++static inline uint32_t dwc_otg_read_host_all_channels_intr(dwc_otg_core_if_t * ++ _core_if) ++{ ++ return (DWC_READ_REG32(&_core_if->host_if->host_global_regs->haint)); ++} ++ ++static inline uint32_t dwc_otg_read_host_channel_intr(dwc_otg_core_if_t * ++ _core_if, dwc_hc_t * _hc) ++{ ++ return (DWC_READ_REG32 ++ (&_core_if->host_if->hc_regs[_hc->hc_num]->hcint)); ++} ++ ++/** ++ * This function returns the mode of the operation, host or device. ++ * ++ * @return 0 - Device Mode, 1 - Host Mode ++ */ ++static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t * _core_if) ++{ ++ return (DWC_READ_REG32(&_core_if->core_global_regs->gintsts) & 0x1); ++} ++ ++/**@}*/ ++ ++/** ++ * DWC_otg CIL callback structure. This structure allows the HCD and ++ * PCD to register functions used for starting and stopping the PCD ++ * and HCD for role change on for a DRD. ++ */ ++typedef struct dwc_otg_cil_callbacks { ++ /** Start function for role change */ ++ int (*start) (void *_p); ++ /** Stop Function for role change */ ++ int (*stop) (void *_p); ++ /** Disconnect Function for role change */ ++ int (*disconnect) (void *_p); ++ /** Resume/Remote wakeup Function */ ++ int (*resume_wakeup) (void *_p); ++ /** Suspend function */ ++ int (*suspend) (void *_p); ++ /** Session Start (SRP) */ ++ int (*session_start) (void *_p); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ /** Sleep (switch to L0 state) */ ++ int (*sleep) (void *_p); ++#endif ++ /** Pointer passed to start() and stop() */ ++ void *p; ++} dwc_otg_cil_callbacks_t; ++ ++extern void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t * _core_if, ++ dwc_otg_cil_callbacks_t * _cb, ++ void *_p); ++extern void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t * _core_if, ++ dwc_otg_cil_callbacks_t * _cb, ++ void *_p); ++ ++void dwc_otg_initiate_srp(dwc_otg_core_if_t * core_if); ++ ++////////////////////////////////////////////////////////////////////// ++/** Start the HCD. Helper function for using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_hcd_start(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->start) { ++ core_if->hcd_cb->start(core_if->hcd_cb->p); ++ } ++} ++ ++/** Stop the HCD. Helper function for using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_hcd_stop(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->stop) { ++ core_if->hcd_cb->stop(core_if->hcd_cb->p); ++ } ++} ++ ++/** Disconnect the HCD. Helper function for using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_hcd_disconnect(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->disconnect) { ++ core_if->hcd_cb->disconnect(core_if->hcd_cb->p); ++ } ++} ++ ++/** Inform the HCD the a New Session has begun. Helper function for ++ * using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_hcd_session_start(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->session_start) { ++ core_if->hcd_cb->session_start(core_if->hcd_cb->p); ++ } ++} ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++/** ++ * Inform the HCD about LPM sleep. ++ * Helper function for using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_hcd_sleep(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->sleep) { ++ core_if->hcd_cb->sleep(core_if->hcd_cb->p); ++ } ++} ++#endif ++ ++/** Resume the HCD. Helper function for using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_hcd_resume(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->resume_wakeup) { ++ core_if->hcd_cb->resume_wakeup(core_if->hcd_cb->p); ++ } ++} ++ ++/** Start the PCD. Helper function for using the PCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_pcd_start(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->pcd_cb && core_if->pcd_cb->start) { ++ core_if->pcd_cb->start(core_if->pcd_cb->p); ++ } ++} ++ ++/** Stop the PCD. Helper function for using the PCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_pcd_stop(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->pcd_cb && core_if->pcd_cb->stop) { ++ core_if->pcd_cb->stop(core_if->pcd_cb->p); ++ } ++} ++ ++/** Suspend the PCD. Helper function for using the PCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_pcd_suspend(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->pcd_cb && core_if->pcd_cb->suspend) { ++ core_if->pcd_cb->suspend(core_if->pcd_cb->p); ++ } ++} ++ ++/** Resume the PCD. Helper function for using the PCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_pcd_resume(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { ++ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); ++ } ++} ++ ++////////////////////////////////////////////////////////////////////// ++ ++#endif +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c +@@ -0,0 +1,1563 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil_intr.c $ ++ * $Revision: #32 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++/** @file ++ * ++ * The Core Interface Layer provides basic services for accessing and ++ * managing the DWC_otg hardware. These services are used by both the ++ * Host Controller Driver and the Peripheral Controller Driver. ++ * ++ * This file contains the Common Interrupt handlers. ++ */ ++#include "dwc_os.h" ++#include "dwc_otg_regs.h" ++#include "dwc_otg_cil.h" ++#include "dwc_otg_driver.h" ++#include "dwc_otg_pcd.h" ++#include "dwc_otg_hcd.h" ++ ++#ifdef DEBUG ++inline const char *op_state_str(dwc_otg_core_if_t * core_if) ++{ ++ return (core_if->op_state == A_HOST ? "a_host" : ++ (core_if->op_state == A_SUSPEND ? "a_suspend" : ++ (core_if->op_state == A_PERIPHERAL ? "a_peripheral" : ++ (core_if->op_state == B_PERIPHERAL ? "b_peripheral" : ++ (core_if->op_state == B_HOST ? "b_host" : "unknown"))))); ++} ++#endif ++ ++/** This function will log a debug message ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++int32_t dwc_otg_handle_mode_mismatch_intr(dwc_otg_core_if_t * core_if) ++{ ++ gintsts_data_t gintsts; ++ DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n", ++ dwc_otg_mode(core_if) ? "Host" : "Device"); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.modemismatch = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ return 1; ++} ++ ++/** ++ * This function handles the OTG Interrupts. It reads the OTG ++ * Interrupt Register (GOTGINT) to determine what interrupt has ++ * occurred. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ gotgint_data_t gotgint; ++ gotgctl_data_t gotgctl; ++ gintmsk_data_t gintmsk; ++ gpwrdn_data_t gpwrdn; ++ ++ gotgint.d32 = DWC_READ_REG32(&global_regs->gotgint); ++ gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl); ++ DWC_DEBUGPL(DBG_CIL, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint.d32, ++ op_state_str(core_if)); ++ ++ if (gotgint.b.sesenddet) { ++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " ++ "Session End Detected++ (%s)\n", ++ op_state_str(core_if)); ++ gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl); ++ ++ if (core_if->op_state == B_HOST) { ++ cil_pcd_start(core_if); ++ core_if->op_state = B_PERIPHERAL; ++ } else { ++ /* If not B_HOST and Device HNP still set. HNP ++ * Did not succeed!*/ ++ if (gotgctl.b.devhnpen) { ++ DWC_DEBUGPL(DBG_ANY, "Session End Detected\n"); ++ __DWC_ERROR("Device Not Connected/Responding!\n"); ++ } ++ ++ /* If Session End Detected the B-Cable has ++ * been disconnected. */ ++ /* Reset PCD and Gadget driver to a ++ * clean state. */ ++ core_if->lx_state = DWC_OTG_L0; ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_pcd_stop(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ ++ if (core_if->adp_enable) { ++ if (core_if->power_down == 2) { ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs-> ++ gpwrdn, gpwrdn.d32, 0); ++ } ++ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ ++ dwc_otg_adp_sense_start(core_if); ++ } ++ } ++ ++ gotgctl.d32 = 0; ++ gotgctl.b.devhnpen = 1; ++ DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0); ++ } ++ if (gotgint.b.sesreqsucstschng) { ++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " ++ "Session Reqeust Success Status Change++\n"); ++ gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl); ++ if (gotgctl.b.sesreqscs) { ++ ++ if ((core_if->core_params->phy_type == ++ DWC_PHY_TYPE_PARAM_FS) && (core_if->core_params->i2c_enable)) { ++ core_if->srp_success = 1; ++ } else { ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_pcd_resume(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ /* Clear Session Request */ ++ gotgctl.d32 = 0; ++ gotgctl.b.sesreq = 1; ++ DWC_MODIFY_REG32(&global_regs->gotgctl, ++ gotgctl.d32, 0); ++ } ++ } ++ } ++ if (gotgint.b.hstnegsucstschng) { ++ /* Print statements during the HNP interrupt handling ++ * can cause it to fail.*/ ++ gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl); ++ /* WA for 3.00a- HW is not setting cur_mode, even sometimes ++ * this does not help*/ ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) ++ dwc_udelay(100); ++ if (gotgctl.b.hstnegscs) { ++ if (dwc_otg_is_host_mode(core_if)) { ++ core_if->op_state = B_HOST; ++ /* ++ * Need to disable SOF interrupt immediately. ++ * When switching from device to host, the PCD ++ * interrupt handler won't handle the ++ * interrupt if host mode is already set. The ++ * HCD interrupt handler won't get called if ++ * the HCD state is HALT. This means that the ++ * interrupt does not get handled and Linux ++ * complains loudly. ++ */ ++ gintmsk.d32 = 0; ++ gintmsk.b.sofintr = 1; ++ DWC_MODIFY_REG32(&global_regs->gintmsk, ++ gintmsk.d32, 0); ++ /* Call callback function with spin lock released */ ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_pcd_stop(core_if); ++ /* ++ * Initialize the Core for Host mode. ++ */ ++ cil_hcd_start(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ core_if->op_state = B_HOST; ++ } ++ } else { ++ gotgctl.d32 = 0; ++ gotgctl.b.hnpreq = 1; ++ gotgctl.b.devhnpen = 1; ++ DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0); ++ DWC_DEBUGPL(DBG_ANY, "HNP Failed\n"); ++ __DWC_ERROR("Device Not Connected/Responding\n"); ++ } ++ } ++ if (gotgint.b.hstnegdet) { ++ /* The disconnect interrupt is set at the same time as ++ * Host Negotiation Detected. During the mode ++ * switch all interrupts are cleared so the disconnect ++ * interrupt handler will not get executed. ++ */ ++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " ++ "Host Negotiation Detected++ (%s)\n", ++ (dwc_otg_is_host_mode(core_if) ? "Host" : ++ "Device")); ++ if (dwc_otg_is_device_mode(core_if)) { ++ DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n", ++ core_if->op_state); ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_hcd_disconnect(core_if); ++ cil_pcd_start(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ core_if->op_state = A_PERIPHERAL; ++ } else { ++ /* ++ * Need to disable SOF interrupt immediately. When ++ * switching from device to host, the PCD interrupt ++ * handler won't handle the interrupt if host mode is ++ * already set. The HCD interrupt handler won't get ++ * called if the HCD state is HALT. This means that ++ * the interrupt does not get handled and Linux ++ * complains loudly. ++ */ ++ gintmsk.d32 = 0; ++ gintmsk.b.sofintr = 1; ++ DWC_MODIFY_REG32(&global_regs->gintmsk, gintmsk.d32, 0); ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_pcd_stop(core_if); ++ cil_hcd_start(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ core_if->op_state = A_HOST; ++ } ++ } ++ if (gotgint.b.adevtoutchng) { ++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " ++ "A-Device Timeout Change++\n"); ++ } ++ if (gotgint.b.debdone) { ++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " "Debounce Done++\n"); ++ } ++ ++ /* Clear GOTGINT */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gotgint, gotgint.d32); ++ ++ return 1; ++} ++ ++void w_conn_id_status_change(void *p) ++{ ++ dwc_otg_core_if_t *core_if = p; ++ uint32_t count = 0; ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ ++ gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++ DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32); ++ DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts); ++ ++ /* B-Device connector (Device Mode) */ ++ if (gotgctl.b.conidsts) { ++ /* Wait for switch to device mode. */ ++ while (!dwc_otg_is_device_mode(core_if)) { ++ DWC_PRINTF("Waiting for Peripheral Mode, Mode=%s\n", ++ (dwc_otg_is_host_mode(core_if) ? "Host" : ++ "Peripheral")); ++ dwc_mdelay(100); ++ if (++count > 10000) ++ break; ++ } ++ DWC_ASSERT(++count < 10000, ++ "Connection id status change timed out"); ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ } else { ++ /* A-Device connector (Host Mode) */ ++ while (!dwc_otg_is_host_mode(core_if)) { ++ DWC_PRINTF("Waiting for Host Mode, Mode=%s\n", ++ (dwc_otg_is_host_mode(core_if) ? "Host" : ++ "Peripheral")); ++ dwc_mdelay(100); ++ if (++count > 10000) ++ break; ++ } ++ DWC_ASSERT(++count < 10000, ++ "Connection id status change timed out"); ++ core_if->op_state = A_HOST; ++ /* ++ * Initialize the Core for Host mode. ++ */ ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_hcd_start(core_if); ++ } ++} ++ ++/** ++ * This function handles the Connector ID Status Change Interrupt. It ++ * reads the OTG Interrupt Register (GOTCTL) to determine whether this ++ * is a Device to Host Mode transition or a Host Mode to Device ++ * Transition. ++ * ++ * This only occurs when the cable is connected/removed from the PHY ++ * connector. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t * core_if) ++{ ++ ++ /* ++ * Need to disable SOF interrupt immediately. If switching from device ++ * to host, the PCD interrupt handler won't handle the interrupt if ++ * host mode is already set. The HCD interrupt handler won't get ++ * called if the HCD state is HALT. This means that the interrupt does ++ * not get handled and Linux complains loudly. ++ */ ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ gintsts_data_t gintsts = {.d32 = 0 }; ++ ++ gintmsk.b.sofintr = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0); ++ ++ DWC_DEBUGPL(DBG_CIL, ++ " ++Connector ID Status Change Interrupt++ (%s)\n", ++ (dwc_otg_is_host_mode(core_if) ? "Host" : "Device")); ++ ++ DWC_SPINUNLOCK(core_if->lock); ++ ++ /* ++ * Need to schedule a work, as there are possible DELAY function calls ++ * Release lock before scheduling workq as it holds spinlock during scheduling ++ */ ++ ++ DWC_WORKQ_SCHEDULE(core_if->wq_otg, w_conn_id_status_change, ++ core_if, "connection id status change"); ++ DWC_SPINLOCK(core_if->lock); ++ ++ /* Set flag and clear interrupt */ ++ gintsts.b.conidstschng = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that a device is initiating the Session ++ * Request Protocol to request the host to turn on bus power so a new ++ * session can begin. The handler responds by turning on bus power. If ++ * the DWC_otg controller is in low power mode, the handler brings the ++ * controller out of low power mode before turning on bus power. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++int32_t dwc_otg_handle_session_req_intr(dwc_otg_core_if_t * core_if) ++{ ++ gintsts_data_t gintsts; ++ ++#ifndef DWC_HOST_ONLY ++ DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n"); ++ ++ if (dwc_otg_is_device_mode(core_if)) { ++ DWC_PRINTF("SRP: Device mode\n"); ++ } else { ++ hprt0_data_t hprt0; ++ DWC_PRINTF("SRP: Host mode\n"); ++ ++ /* Turn on the port power bit. */ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtpwr = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ ++ /* Start the Connection timer. So a message can be displayed ++ * if connect does not occur within 10 seconds. */ ++ cil_hcd_session_start(core_if); ++ } ++#endif ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.sessreqintr = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++void w_wakeup_detected(void *p) ++{ ++ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) p; ++ /* ++ * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms ++ * so that OPT tests pass with all PHYs). ++ */ ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++#if 0 ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ /* Restart the Phy Clock */ ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); ++ dwc_udelay(10); ++#endif //0 ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ DWC_DEBUGPL(DBG_ANY, "Resume: HPRT0=%0x\n", hprt0.d32); ++// dwc_mdelay(70); ++ hprt0.b.prtres = 0; /* Resume */ ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ DWC_DEBUGPL(DBG_ANY, "Clear Resume: HPRT0=%0x\n", ++ DWC_READ_REG32(core_if->host_if->hprt0)); ++ ++ cil_hcd_resume(core_if); ++ ++ /** Change to L0 state*/ ++ core_if->lx_state = DWC_OTG_L0; ++} ++ ++/** ++ * This interrupt indicates that the DWC_otg controller has detected a ++ * resume or remote wakeup sequence. If the DWC_otg controller is in ++ * low power mode, the handler must brings the controller out of low ++ * power mode. The controller automatically begins resume ++ * signaling. The handler schedules a time to stop resume signaling. ++ */ ++int32_t dwc_otg_handle_wakeup_detected_intr(dwc_otg_core_if_t * core_if) ++{ ++ gintsts_data_t gintsts; ++ ++ DWC_DEBUGPL(DBG_ANY, ++ "++Resume and Remote Wakeup Detected Interrupt++\n"); ++ ++ DWC_PRINTF("%s lxstate = %d\n", __func__, core_if->lx_state); ++ ++ if (dwc_otg_is_device_mode(core_if)) { ++ dctl_data_t dctl = {.d32 = 0 }; ++ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs-> ++ dsts)); ++ if (core_if->lx_state == DWC_OTG_L2) { ++#ifdef PARTIAL_POWER_DOWN ++ if (core_if->hwcfg4.b.power_optimiz) { ++ pcgcctl_data_t power = {.d32 = 0 }; ++ ++ power.d32 = DWC_READ_REG32(core_if->pcgcctl); ++ DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n", ++ power.d32); ++ ++ power.b.stoppclk = 0; ++ DWC_WRITE_REG32(core_if->pcgcctl, power.d32); ++ ++ power.b.pwrclmp = 0; ++ DWC_WRITE_REG32(core_if->pcgcctl, power.d32); ++ ++ power.b.rstpdwnmodule = 0; ++ DWC_WRITE_REG32(core_if->pcgcctl, power.d32); ++ } ++#endif ++ /* Clear the Remote Wakeup Signaling */ ++ dctl.b.rmtwkupsig = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ dctl, dctl.d32, 0); ++ ++ DWC_SPINUNLOCK(core_if->lock); ++ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { ++ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); ++ } ++ DWC_SPINLOCK(core_if->lock); ++ } else { ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ lpmcfg.b.hird_thres &= (~(1 << 4)); ++ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, ++ lpmcfg.d32); ++ } ++ /** Change to L0 state*/ ++ core_if->lx_state = DWC_OTG_L0; ++ } else { ++ if (core_if->lx_state != DWC_OTG_L1) { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ ++ /* Restart the Phy Clock */ ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); ++ DWC_TIMER_SCHEDULE(core_if->wkp_timer, 71); ++ } else { ++ /** Change to L0 state*/ ++ core_if->lx_state = DWC_OTG_L0; ++ } ++ } ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.wkupintr = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that the Wakeup Logic has detected a ++ * Device disconnect. ++ */ ++static int32_t dwc_otg_handle_pwrdn_disconnect_intr(dwc_otg_core_if_t *core_if) ++{ ++ gpwrdn_data_t gpwrdn = { .d32 = 0 }; ++ gpwrdn_data_t gpwrdn_temp = { .d32 = 0 }; ++ gpwrdn_temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ ++ DWC_PRINTF("%s called\n", __FUNCTION__); ++ ++ if (!core_if->hibernation_suspend) { ++ DWC_PRINTF("Already exited from Hibernation\n"); ++ return 1; ++ } ++ ++ /* Switch on the voltage to the core */ ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Reset the core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Disable power clamps*/ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Remove reset the core signal */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable PMU interrupt */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ core_if->hibernation_suspend = 0; ++ ++ /* Disable PMU */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ if (gpwrdn_temp.b.idsts) { ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ } else { ++ core_if->op_state = A_HOST; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_hcd_start(core_if); ++ } ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that the Wakeup Logic has detected a ++ * remote wakeup sequence. ++ */ ++static int32_t dwc_otg_handle_pwrdn_wakeup_detected_intr(dwc_otg_core_if_t * core_if) ++{ ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ DWC_DEBUGPL(DBG_ANY, ++ "++Powerdown Remote Wakeup Detected Interrupt++\n"); ++ ++ if (!core_if->hibernation_suspend) { ++ DWC_PRINTF("Already exited from Hibernation\n"); ++ return 1; ++ } ++ ++ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ if (gpwrdn.b.idsts) { // Device Mode ++ if ((core_if->power_down == 2) ++ && (core_if->hibernation_suspend == 1)) { ++ dwc_otg_device_hibernation_restore(core_if, 0, 0); ++ } ++ } else { ++ if ((core_if->power_down == 2) ++ && (core_if->hibernation_suspend == 1)) { ++ dwc_otg_host_hibernation_restore(core_if, 1, 0); ++ } ++ } ++ return 1; ++} ++ ++static int32_t dwc_otg_handle_pwrdn_idsts_change(dwc_otg_device_t *otg_dev) ++{ ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ gpwrdn_data_t gpwrdn_temp = {.d32 = 0 }; ++ dwc_otg_core_if_t *core_if = otg_dev->core_if; ++ ++ DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__); ++ gpwrdn_temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ if (core_if->power_down == 2) { ++ if (!core_if->hibernation_suspend) { ++ DWC_PRINTF("Already exited from Hibernation\n"); ++ return 1; ++ } ++ DWC_DEBUGPL(DBG_ANY, "Exit from hibernation on ID sts change\n"); ++ /* Switch on the voltage to the core */ ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Reset the core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Disable power clamps */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Remove reset the core signal */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable PMU interrupt */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /*Indicates that we are exiting from hibernation */ ++ core_if->hibernation_suspend = 0; ++ ++ /* Disable PMU */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ gpwrdn.d32 = core_if->gr_backup->gpwrdn_local; ++ if (gpwrdn.b.dis_vbus == 1) { ++ gpwrdn.d32 = 0; ++ gpwrdn.b.dis_vbus = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ } ++ ++ if (gpwrdn_temp.b.idsts) { ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ } else { ++ core_if->op_state = A_HOST; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_hcd_start(core_if); ++ } ++ } ++ ++ if (core_if->adp_enable) { ++ uint8_t is_host = 0; ++ DWC_SPINUNLOCK(core_if->lock); ++ /* Change the core_if's lock to hcd/pcd lock depend on mode? */ ++#ifndef DWC_HOST_ONLY ++ if (gpwrdn_temp.b.idsts) ++ core_if->lock = otg_dev->pcd->lock; ++#endif ++#ifndef DWC_DEVICE_ONLY ++ if (!gpwrdn_temp.b.idsts) { ++ core_if->lock = otg_dev->hcd->lock; ++ is_host = 1; ++ } ++#endif ++ DWC_PRINTF("RESTART ADP\n"); ++ if (core_if->adp.probe_enabled) ++ dwc_otg_adp_probe_stop(core_if); ++ if (core_if->adp.sense_enabled) ++ dwc_otg_adp_sense_stop(core_if); ++ if (core_if->adp.sense_timer_started) ++ DWC_TIMER_CANCEL(core_if->adp.sense_timer); ++ if (core_if->adp.vbuson_timer_started) ++ DWC_TIMER_CANCEL(core_if->adp.vbuson_timer); ++ core_if->adp.probe_timer_values[0] = -1; ++ core_if->adp.probe_timer_values[1] = -1; ++ core_if->adp.sense_timer_started = 0; ++ core_if->adp.vbuson_timer_started = 0; ++ core_if->adp.probe_counter = 0; ++ core_if->adp.gpwrdn = 0; ++ ++ /* Disable PMU and restart ADP */ ++ gpwrdn_temp.d32 = 0; ++ gpwrdn_temp.b.pmuactv = 1; ++ gpwrdn_temp.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ DWC_PRINTF("Check point 1\n"); ++ dwc_mdelay(110); ++ dwc_otg_adp_start(core_if, is_host); ++ DWC_SPINLOCK(core_if->lock); ++ } ++ ++ ++ return 1; ++} ++ ++static int32_t dwc_otg_handle_pwrdn_session_change(dwc_otg_core_if_t * core_if) ++{ ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ int32_t otg_cap_param = core_if->core_params->otg_cap; ++ DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__); ++ ++ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ if (core_if->power_down == 2) { ++ if (!core_if->hibernation_suspend) { ++ DWC_PRINTF("Already exited from Hibernation\n"); ++ return 1; ++ } ++ ++ if ((otg_cap_param != DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE || ++ otg_cap_param != DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE) && ++ gpwrdn.b.bsessvld == 0) { ++ /* Save gpwrdn register for further usage if stschng interrupt */ ++ core_if->gr_backup->gpwrdn_local = ++ DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ /*Exit from ISR and wait for stschng interrupt with bsessvld = 1 */ ++ return 1; ++ } ++ ++ /* Switch on the voltage to the core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Reset the core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Disable power clamps */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Remove reset the core signal */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable PMU interrupt */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /*Indicates that we are exiting from hibernation */ ++ core_if->hibernation_suspend = 0; ++ ++ /* Disable PMU */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ ++ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE || ++ otg_cap_param == DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE) { ++ /* ++ * Initiate SRP after initial ADP probe. ++ */ ++ dwc_otg_initiate_srp(core_if); ++ } ++ } ++ ++ return 1; ++} ++/** ++ * This interrupt indicates that the Wakeup Logic has detected a ++ * status change either on IDDIG or BSessVld. ++ */ ++static uint32_t dwc_otg_handle_pwrdn_stschng_intr(dwc_otg_device_t *otg_dev) ++{ ++ int retval; ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ gpwrdn_data_t gpwrdn_temp = {.d32 = 0 }; ++ dwc_otg_core_if_t *core_if = otg_dev->core_if; ++ ++ DWC_PRINTF("%s called\n", __FUNCTION__); ++ ++ if (core_if->power_down == 2) { ++ if (core_if->hibernation_suspend <= 0) { ++ DWC_PRINTF("Already exited from Hibernation\n"); ++ return 1; ++ } else ++ gpwrdn_temp.d32 = core_if->gr_backup->gpwrdn_local; ++ ++ } else { ++ gpwrdn_temp.d32 = core_if->adp.gpwrdn; ++ } ++ ++ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ ++ if (gpwrdn.b.idsts ^ gpwrdn_temp.b.idsts) { ++ retval = dwc_otg_handle_pwrdn_idsts_change(otg_dev); ++ } else if (gpwrdn.b.bsessvld ^ gpwrdn_temp.b.bsessvld) { ++ retval = dwc_otg_handle_pwrdn_session_change(core_if); ++ } ++ ++ return retval; ++} ++ ++/** ++ * This interrupt indicates that the Wakeup Logic has detected a ++ * SRP. ++ */ ++static int32_t dwc_otg_handle_pwrdn_srp_intr(dwc_otg_core_if_t * core_if) ++{ ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ ++ DWC_PRINTF("%s called\n", __FUNCTION__); ++ ++ if (!core_if->hibernation_suspend) { ++ DWC_PRINTF("Already exited from Hibernation\n"); ++ return 1; ++ } ++#ifdef DWC_DEV_SRPCAP ++ if (core_if->pwron_timer_started) { ++ core_if->pwron_timer_started = 0; ++ DWC_TIMER_CANCEL(core_if->pwron_timer); ++ } ++#endif ++ ++ /* Switch on the voltage to the core */ ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Reset the core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Disable power clamps */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Remove reset the core signal */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable PMU interrupt */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Indicates that we are exiting from hibernation */ ++ core_if->hibernation_suspend = 0; ++ ++ /* Disable PMU */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Programm Disable VBUS to 0 */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.dis_vbus = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /*Initialize the core as Host */ ++ core_if->op_state = A_HOST; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_hcd_start(core_if); ++ ++ return 1; ++} ++ ++/** This interrupt indicates that restore command after Hibernation ++ * was completed by the core. */ ++int32_t dwc_otg_handle_restore_done_intr(dwc_otg_core_if_t * core_if) ++{ ++ pcgcctl_data_t pcgcctl; ++ DWC_DEBUGPL(DBG_ANY, "++Restore Done Interrupt++\n"); ++ ++ //TODO De-assert restore signal. 8.a ++ pcgcctl.d32 = DWC_READ_REG32(core_if->pcgcctl); ++ if (pcgcctl.b.restoremode == 1) { ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ /* ++ * If restore mode is Remote Wakeup, ++ * unmask Remote Wakeup interrupt. ++ */ ++ gintmsk.b.wkupintr = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, ++ 0, gintmsk.d32); ++ } ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that a device has been disconnected from ++ * the root port. ++ */ ++int32_t dwc_otg_handle_disconnect_intr(dwc_otg_core_if_t * core_if) ++{ ++ gintsts_data_t gintsts; ++ ++ DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n", ++ (dwc_otg_is_host_mode(core_if) ? "Host" : "Device"), ++ op_state_str(core_if)); ++ ++/** @todo Consolidate this if statement. */ ++#ifndef DWC_HOST_ONLY ++ if (core_if->op_state == B_HOST) { ++ /* If in device mode Disconnect and stop the HCD, then ++ * start the PCD. */ ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_hcd_disconnect(core_if); ++ cil_pcd_start(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ core_if->op_state = B_PERIPHERAL; ++ } else if (dwc_otg_is_device_mode(core_if)) { ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ gotgctl.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++ if (gotgctl.b.hstsethnpen == 1) { ++ /* Do nothing, if HNP in process the OTG ++ * interrupt "Host Negotiation Detected" ++ * interrupt will do the mode switch. ++ */ ++ } else if (gotgctl.b.devhnpen == 0) { ++ /* If in device mode Disconnect and stop the HCD, then ++ * start the PCD. */ ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_hcd_disconnect(core_if); ++ cil_pcd_start(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ core_if->op_state = B_PERIPHERAL; ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "!a_peripheral && !devhnpen\n"); ++ } ++ } else { ++ if (core_if->op_state == A_HOST) { ++ /* A-Cable still connected but device disconnected. */ ++ cil_hcd_disconnect(core_if); ++ if (core_if->adp_enable) { ++ gpwrdn_data_t gpwrdn = { .d32 = 0 }; ++ cil_hcd_stop(core_if); ++ /* Enable Power Down Logic */ ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_otg_adp_probe_start(core_if); ++ ++ /* Power off the core */ ++ if (core_if->power_down == 2) { ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32 ++ (&core_if->core_global_regs->gpwrdn, ++ gpwrdn.d32, 0); ++ } ++ } ++ } ++ } ++#endif ++ /* Change to L3(OFF) state */ ++ core_if->lx_state = DWC_OTG_L3; ++ ++ gintsts.d32 = 0; ++ gintsts.b.disconnect = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that SUSPEND state has been detected on ++ * the USB. ++ * ++ * For HNP the USB Suspend interrupt signals the change from ++ * "a_peripheral" to "a_host". ++ * ++ * When power management is enabled the core will be put in low power ++ * mode. ++ */ ++int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t * core_if) ++{ ++ dsts_data_t dsts; ++ gintsts_data_t gintsts; ++ dcfg_data_t dcfg; ++ ++ DWC_DEBUGPL(DBG_ANY, "USB SUSPEND\n"); ++ ++ if (dwc_otg_is_device_mode(core_if)) { ++ /* Check the Device status register to determine if the Suspend ++ * state is active. */ ++ dsts.d32 = ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32); ++ DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d " ++ "HWCFG4.power Optimize=%d\n", ++ dsts.b.suspsts, core_if->hwcfg4.b.power_optimiz); ++ ++#ifdef PARTIAL_POWER_DOWN ++/** @todo Add a module parameter for power management. */ ++ ++ if (dsts.b.suspsts && core_if->hwcfg4.b.power_optimiz) { ++ pcgcctl_data_t power = {.d32 = 0 }; ++ DWC_DEBUGPL(DBG_CIL, "suspend\n"); ++ ++ power.b.pwrclmp = 1; ++ DWC_WRITE_REG32(core_if->pcgcctl, power.d32); ++ ++ power.b.rstpdwnmodule = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, power.d32); ++ ++ power.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, power.d32); ++ ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "disconnect?\n"); ++ } ++#endif ++ /* PCD callback for suspend. Release the lock inside of callback function */ ++ cil_pcd_suspend(core_if); ++ if (core_if->power_down == 2) ++ { ++ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); ++ DWC_DEBUGPL(DBG_ANY,"lx_state = %08x\n",core_if->lx_state); ++ DWC_DEBUGPL(DBG_ANY," device address = %08d\n",dcfg.b.devaddr); ++ ++ if (core_if->lx_state != DWC_OTG_L3 && dcfg.b.devaddr) { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ gusbcfg_data_t gusbcfg = {.d32 = 0 }; ++ ++ /* Change to L2(suspend) state */ ++ core_if->lx_state = DWC_OTG_L2; ++ ++ /* Clear interrupt in gintsts */ ++ gintsts.d32 = 0; ++ gintsts.b.usbsuspend = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs-> ++ gintsts, gintsts.d32); ++ DWC_PRINTF("Start of hibernation completed\n"); ++ dwc_otg_save_global_regs(core_if); ++ dwc_otg_save_dev_regs(core_if); ++ ++ gusbcfg.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs-> ++ gusbcfg); ++ if (gusbcfg.b.ulpi_utmi_sel == 1) { ++ /* ULPI interface */ ++ /* Suspend the Phy Clock */ ++ pcgcctl.d32 = 0; ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, ++ pcgcctl.d32); ++ dwc_udelay(10); ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ } else { ++ /* UTMI+ Interface */ ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, ++ pcgcctl.d32); ++ dwc_udelay(10); ++ } ++ ++ /* Set flag to indicate that we are in hibernation */ ++ core_if->hibernation_suspend = 1; ++ /* Enable interrupts from wake up logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Unmask device mode interrupts in GPWRDN */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.rst_det_msk = 1; ++ gpwrdn.b.lnstchng_msk = 1; ++ gpwrdn.b.sts_chngint_msk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Enable Power Down Clamp */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Switch off VDD */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ ++ /* Save gpwrdn register for further usage if stschng interrupt */ ++ core_if->gr_backup->gpwrdn_local = ++ DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ DWC_PRINTF("Hibernation completed\n"); ++ ++ return 1; ++ } ++ } else if (core_if->power_down == 3) { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); ++ DWC_DEBUGPL(DBG_ANY, "lx_state = %08x\n",core_if->lx_state); ++ DWC_DEBUGPL(DBG_ANY, " device address = %08d\n",dcfg.b.devaddr); ++ ++ if (core_if->lx_state != DWC_OTG_L3 && dcfg.b.devaddr) { ++ DWC_DEBUGPL(DBG_ANY, "Start entering to extended hibernation\n"); ++ core_if->xhib = 1; ++ ++ /* Clear interrupt in gintsts */ ++ gintsts.d32 = 0; ++ gintsts.b.usbsuspend = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs-> ++ gintsts, gintsts.d32); ++ ++ dwc_otg_save_global_regs(core_if); ++ dwc_otg_save_dev_regs(core_if); ++ ++ /* Wait for 10 PHY clocks */ ++ dwc_udelay(10); ++ ++ /* Program GPIO register while entering to xHib */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, 0x1); ++ ++ pcgcctl.b.enbl_extnd_hiber = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); ++ ++ pcgcctl.d32 = 0; ++ pcgcctl.b.extnd_hiber_pwrclmp = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); ++ ++ pcgcctl.d32 = 0; ++ pcgcctl.b.extnd_hiber_switch = 1; ++ core_if->gr_backup->xhib_gpwrdn = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ core_if->gr_backup->xhib_pcgcctl = DWC_READ_REG32(core_if->pcgcctl) | pcgcctl.d32; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); ++ ++ DWC_DEBUGPL(DBG_ANY, "Finished entering to extended hibernation\n"); ++ ++ return 1; ++ } ++ } ++ } else { ++ if (core_if->op_state == A_PERIPHERAL) { ++ DWC_DEBUGPL(DBG_ANY, "a_peripheral->a_host\n"); ++ /* Clear the a_peripheral flag, back to a_host. */ ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_pcd_stop(core_if); ++ cil_hcd_start(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ core_if->op_state = A_HOST; ++ } ++ } ++ ++ /* Change to L2(suspend) state */ ++ core_if->lx_state = DWC_OTG_L2; ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.usbsuspend = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++static int32_t dwc_otg_handle_xhib_exit_intr(dwc_otg_core_if_t * core_if) ++{ ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ gahbcfg_data_t gahbcfg = {.d32 = 0 }; ++ ++ dwc_udelay(10); ++ ++ /* Program GPIO register while entering to xHib */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, 0x0); ++ ++ pcgcctl.d32 = core_if->gr_backup->xhib_pcgcctl; ++ pcgcctl.b.extnd_hiber_pwrclmp = 0; ++ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); ++ dwc_udelay(10); ++ ++ gpwrdn.d32 = core_if->gr_backup->xhib_gpwrdn; ++ gpwrdn.b.restore = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ restore_lpm_i2c_regs(core_if); ++ ++ pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14); ++ pcgcctl.b.max_xcvrselect = 1; ++ pcgcctl.b.ess_reg_restored = 0; ++ pcgcctl.b.extnd_hiber_switch = 0; ++ pcgcctl.b.extnd_hiber_pwrclmp = 0; ++ pcgcctl.b.enbl_extnd_hiber = 1; ++ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); ++ ++ gahbcfg.d32 = core_if->gr_backup->gahbcfg_local; ++ gahbcfg.b.glblintrmsk = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gahbcfg.d32); ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0x1 << 16); ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, ++ core_if->gr_backup->gusbcfg_local); ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, ++ core_if->dr_backup->dcfg); ++ ++ pcgcctl.d32 = 0; ++ pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14); ++ pcgcctl.b.max_xcvrselect = 1; ++ pcgcctl.d32 |= 0x608; ++ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); ++ dwc_udelay(10); ++ ++ pcgcctl.d32 = 0; ++ pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14); ++ pcgcctl.b.max_xcvrselect = 1; ++ pcgcctl.b.ess_reg_restored = 1; ++ pcgcctl.b.enbl_extnd_hiber = 1; ++ pcgcctl.b.rstpdwnmodule = 1; ++ pcgcctl.b.restoremode = 1; ++ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); ++ ++ DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__); ++ ++ return 1; ++} ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++/** ++ * This function hadles LPM transaction received interrupt. ++ */ ++static int32_t dwc_otg_handle_lpm_intr(dwc_otg_core_if_t * core_if) ++{ ++ glpmcfg_data_t lpmcfg; ++ gintsts_data_t gintsts; ++ ++ if (!core_if->core_params->lpm_enable) { ++ DWC_PRINTF("Unexpected LPM interrupt\n"); ++ } ++ ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ DWC_PRINTF("LPM config register = 0x%08x\n", lpmcfg.d32); ++ ++ if (dwc_otg_is_host_mode(core_if)) { ++ cil_hcd_sleep(core_if); ++ } else { ++ lpmcfg.b.hird_thres |= (1 << 4); ++ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, ++ lpmcfg.d32); ++ } ++ ++ /* Examine prt_sleep_sts after TL1TokenTetry period max (10 us) */ ++ dwc_udelay(10); ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ if (lpmcfg.b.prt_sleep_sts) { ++ /* Save the current state */ ++ core_if->lx_state = DWC_OTG_L1; ++ } ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.lpmtranrcvd = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ return 1; ++} ++#endif /* CONFIG_USB_DWC_OTG_LPM */ ++ ++/** ++ * This function returns the Core Interrupt register. ++ */ ++static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t * core_if) ++{ ++ gahbcfg_data_t gahbcfg = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ gintmsk_data_t gintmsk; ++ gintmsk_data_t gintmsk_common = {.d32 = 0 }; ++ gintmsk_common.b.wkupintr = 1; ++ gintmsk_common.b.sessreqintr = 1; ++ gintmsk_common.b.conidstschng = 1; ++ gintmsk_common.b.otgintr = 1; ++ gintmsk_common.b.modemismatch = 1; ++ gintmsk_common.b.disconnect = 1; ++ gintmsk_common.b.usbsuspend = 1; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ gintmsk_common.b.lpmtranrcvd = 1; ++#endif ++ gintmsk_common.b.restoredone = 1; ++ /** @todo: The port interrupt occurs while in device ++ * mode. Added code to CIL to clear the interrupt for now! ++ */ ++ gintmsk_common.b.portintr = 1; ++ ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ gintmsk.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); ++ gahbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gahbcfg); ++ ++#ifdef DEBUG ++ /* if any common interrupts set */ ++ if (gintsts.d32 & gintmsk_common.d32) { ++ DWC_DEBUGPL(DBG_ANY, "gintsts=%08x gintmsk=%08x\n", ++ gintsts.d32, gintmsk.d32); ++ } ++#endif ++ if (gahbcfg.b.glblintrmsk) ++ return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32); ++ else ++ return 0; ++ ++} ++ ++/* MACRO for clearing interupt bits in GPWRDN register */ ++#define CLEAR_GPWRDN_INTR(__core_if,__intr) \ ++do { \ ++ gpwrdn_data_t gpwrdn = {.d32=0}; \ ++ gpwrdn.b.__intr = 1; \ ++ DWC_MODIFY_REG32(&__core_if->core_global_regs->gpwrdn, \ ++ 0, gpwrdn.d32); \ ++} while (0) ++ ++/** ++ * Common interrupt handler. ++ * ++ * The common interrupts are those that occur in both Host and Device mode. ++ * This handler handles the following interrupts: ++ * - Mode Mismatch Interrupt ++ * - Disconnect Interrupt ++ * - OTG Interrupt ++ * - Connector ID Status Change Interrupt ++ * - Session Request Interrupt. ++ * - Resume / Remote Wakeup Detected Interrupt. ++ * - LPM Transaction Received Interrupt ++ * - ADP Transaction Received Interrupt ++ * ++ */ ++int32_t dwc_otg_handle_common_intr(void *dev) ++{ ++ int retval = 0; ++ gintsts_data_t gintsts; ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ dwc_otg_device_t *otg_dev = dev; ++ dwc_otg_core_if_t *core_if = otg_dev->core_if; ++ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ if (dwc_otg_is_device_mode(core_if)) ++ core_if->frame_num = dwc_otg_get_frame_number(core_if); ++ ++ if (core_if->lock) ++ DWC_SPINLOCK(core_if->lock); ++ ++ if (core_if->power_down == 3 && core_if->xhib == 1) { ++ DWC_DEBUGPL(DBG_ANY, "Exiting from xHIB state\n"); ++ retval |= dwc_otg_handle_xhib_exit_intr(core_if); ++ core_if->xhib = 2; ++ if (core_if->lock) ++ DWC_SPINUNLOCK(core_if->lock); ++ ++ return retval; ++ } ++ ++ if (core_if->hibernation_suspend <= 0) { ++ gintsts.d32 = dwc_otg_read_common_intr(core_if); ++ ++ if (gintsts.b.modemismatch) { ++ retval |= dwc_otg_handle_mode_mismatch_intr(core_if); ++ } ++ if (gintsts.b.otgintr) { ++ retval |= dwc_otg_handle_otg_intr(core_if); ++ } ++ if (gintsts.b.conidstschng) { ++ retval |= ++ dwc_otg_handle_conn_id_status_change_intr(core_if); ++ } ++ if (gintsts.b.disconnect) { ++ retval |= dwc_otg_handle_disconnect_intr(core_if); ++ } ++ if (gintsts.b.sessreqintr) { ++ retval |= dwc_otg_handle_session_req_intr(core_if); ++ } ++ if (gintsts.b.wkupintr) { ++ retval |= dwc_otg_handle_wakeup_detected_intr(core_if); ++ } ++ if (gintsts.b.usbsuspend) { ++ retval |= dwc_otg_handle_usb_suspend_intr(core_if); ++ } ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ if (gintsts.b.lpmtranrcvd) { ++ retval |= dwc_otg_handle_lpm_intr(core_if); ++ } ++#endif ++ if (gintsts.b.restoredone) { ++ gintsts.d32 = 0; ++ if (core_if->power_down == 2) ++ core_if->hibernation_suspend = -1; ++ else if (core_if->power_down == 3 && core_if->xhib == 2) { ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ dctl_data_t dctl = {.d32 = 0 }; ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs-> ++ gintsts, 0xFFFFFFFF); ++ ++ DWC_DEBUGPL(DBG_ANY, ++ "RESTORE DONE generated\n"); ++ ++ gpwrdn.b.restore = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ pcgcctl.b.rstpdwnmodule = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, core_if->gr_backup->gusbcfg_local); ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, core_if->dr_backup->dcfg); ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, core_if->dr_backup->dctl); ++ dwc_udelay(50); ++ ++ dctl.b.pwronprgdone = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ dwc_udelay(10); ++ ++ dwc_otg_restore_global_regs(core_if); ++ dwc_otg_restore_dev_regs(core_if, 0); ++ ++ dctl.d32 = 0; ++ dctl.b.pwronprgdone = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0); ++ dwc_udelay(10); ++ ++ pcgcctl.d32 = 0; ++ pcgcctl.b.enbl_extnd_hiber = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); ++ ++ /* The core will be in ON STATE */ ++ core_if->lx_state = DWC_OTG_L0; ++ core_if->xhib = 0; ++ ++ DWC_SPINUNLOCK(core_if->lock); ++ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { ++ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); ++ } ++ DWC_SPINLOCK(core_if->lock); ++ ++ } ++ ++ gintsts.b.restoredone = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts,gintsts.d32); ++ DWC_PRINTF(" --Restore done interrupt received-- \n"); ++ retval |= 1; ++ } ++ if (gintsts.b.portintr && dwc_otg_is_device_mode(core_if)) { ++ /* The port interrupt occurs while in device mode with HPRT0 ++ * Port Enable/Disable. ++ */ ++ gintsts.d32 = 0; ++ gintsts.b.portintr = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts,gintsts.d32); ++ retval |= 1; ++ ++ } ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "gpwrdn=%08x\n", gpwrdn.d32); ++ ++ if (gpwrdn.b.disconn_det && gpwrdn.b.disconn_det_msk) { ++ CLEAR_GPWRDN_INTR(core_if, disconn_det); ++ if (gpwrdn.b.linestate == 0) { ++ dwc_otg_handle_pwrdn_disconnect_intr(core_if); ++ } else { ++ DWC_PRINTF("Disconnect detected while linestate is not 0\n"); ++ } ++ ++ retval |= 1; ++ } ++ if (gpwrdn.b.lnstschng && gpwrdn.b.lnstchng_msk) { ++ CLEAR_GPWRDN_INTR(core_if, lnstschng); ++ /* remote wakeup from hibernation */ ++ if (gpwrdn.b.linestate == 2 || gpwrdn.b.linestate == 1) { ++ dwc_otg_handle_pwrdn_wakeup_detected_intr(core_if); ++ } else { ++ DWC_PRINTF("gpwrdn.linestate = %d\n", gpwrdn.b.linestate); ++ } ++ retval |= 1; ++ } ++ if (gpwrdn.b.rst_det && gpwrdn.b.rst_det_msk) { ++ CLEAR_GPWRDN_INTR(core_if, rst_det); ++ if (gpwrdn.b.linestate == 0) { ++ DWC_PRINTF("Reset detected\n"); ++ retval |= dwc_otg_device_hibernation_restore(core_if, 0, 1); ++ } ++ } ++ if (gpwrdn.b.srp_det && gpwrdn.b.srp_det_msk) { ++ CLEAR_GPWRDN_INTR(core_if, srp_det); ++ dwc_otg_handle_pwrdn_srp_intr(core_if); ++ retval |= 1; ++ } ++ } ++ /* Handle ADP interrupt here */ ++ if (gpwrdn.b.adp_int) { ++ DWC_PRINTF("ADP interrupt\n"); ++ CLEAR_GPWRDN_INTR(core_if, adp_int); ++ dwc_otg_adp_handle_intr(core_if); ++ retval |= 1; ++ } ++ if (gpwrdn.b.sts_chngint && gpwrdn.b.sts_chngint_msk) { ++ DWC_PRINTF("STS CHNG interrupt asserted\n"); ++ CLEAR_GPWRDN_INTR(core_if, sts_chngint); ++ dwc_otg_handle_pwrdn_stschng_intr(otg_dev); ++ ++ retval |= 1; ++ } ++ if (core_if->lock) ++ DWC_SPINUNLOCK(core_if->lock); ++ ++ return retval; ++} +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_core_if.h +@@ -0,0 +1,705 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_core_if.h $ ++ * $Revision: #13 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#if !defined(__DWC_CORE_IF_H__) ++#define __DWC_CORE_IF_H__ ++ ++#include "dwc_os.h" ++ ++/** @file ++ * This file defines DWC_OTG Core API ++ */ ++ ++struct dwc_otg_core_if; ++typedef struct dwc_otg_core_if dwc_otg_core_if_t; ++ ++/** Maximum number of Periodic FIFOs */ ++#define MAX_PERIO_FIFOS 15 ++/** Maximum number of Periodic FIFOs */ ++#define MAX_TX_FIFOS 15 ++ ++/** Maximum number of Endpoints/HostChannels */ ++#define MAX_EPS_CHANNELS 16 ++ ++extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t * _reg_base_addr); ++extern void dwc_otg_core_init(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_cil_remove(dwc_otg_core_if_t * _core_if); ++ ++extern void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t * _core_if); ++ ++extern uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t * _core_if); ++extern uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t * _core_if); ++ ++extern uint8_t dwc_otg_is_dma_enable(dwc_otg_core_if_t * core_if); ++ ++/** This function should be called on every hardware interrupt. */ ++extern int32_t dwc_otg_handle_common_intr(void *otg_dev); ++ ++/** @name OTG Core Parameters */ ++/** @{ */ ++ ++/** ++ * Specifies the OTG capabilities. The driver will automatically ++ * detect the value for this parameter if none is specified. ++ * 0 - HNP and SRP capable (default) ++ * 1 - SRP Only capable ++ * 2 - No HNP/SRP capable ++ */ ++extern int dwc_otg_set_param_otg_cap(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_param_otg_cap(dwc_otg_core_if_t * core_if); ++#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0 ++#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1 ++#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2 ++#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE ++ ++extern int dwc_otg_set_param_opt(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_param_opt(dwc_otg_core_if_t * core_if); ++#define dwc_param_opt_default 1 ++ ++/** ++ * Specifies whether to use slave or DMA mode for accessing the data ++ * FIFOs. The driver will automatically detect the value for this ++ * parameter if none is specified. ++ * 0 - Slave ++ * 1 - DMA (default, if available) ++ */ ++extern int dwc_otg_set_param_dma_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_dma_enable(dwc_otg_core_if_t * core_if); ++#define dwc_param_dma_enable_default 1 ++ ++/** ++ * When DMA mode is enabled specifies whether to use ++ * address DMA or DMA Descritor mode for accessing the data ++ * FIFOs in device mode. The driver will automatically detect ++ * the value for this parameter if none is specified. ++ * 0 - address DMA ++ * 1 - DMA Descriptor(default, if available) ++ */ ++extern int dwc_otg_set_param_dma_desc_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_dma_desc_enable(dwc_otg_core_if_t * core_if); ++//#define dwc_param_dma_desc_enable_default 1 ++#define dwc_param_dma_desc_enable_default 0 // Broadcom BCM2708 ++ ++/** The DMA Burst size (applicable only for External DMA ++ * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32) ++ */ ++extern int dwc_otg_set_param_dma_burst_size(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_dma_burst_size(dwc_otg_core_if_t * core_if); ++#define dwc_param_dma_burst_size_default 32 ++ ++/** ++ * Specifies the maximum speed of operation in host and device mode. ++ * The actual speed depends on the speed of the attached device and ++ * the value of phy_type. The actual speed depends on the speed of the ++ * attached device. ++ * 0 - High Speed (default) ++ * 1 - Full Speed ++ */ ++extern int dwc_otg_set_param_speed(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_param_speed(dwc_otg_core_if_t * core_if); ++#define dwc_param_speed_default 0 ++#define DWC_SPEED_PARAM_HIGH 0 ++#define DWC_SPEED_PARAM_FULL 1 ++ ++/** Specifies whether low power mode is supported when attached ++ * to a Full Speed or Low Speed device in host mode. ++ * 0 - Don't support low power mode (default) ++ * 1 - Support low power mode ++ */ ++extern int dwc_otg_set_param_host_support_fs_ls_low_power(dwc_otg_core_if_t * ++ core_if, int32_t val); ++extern int32_t dwc_otg_get_param_host_support_fs_ls_low_power(dwc_otg_core_if_t ++ * core_if); ++#define dwc_param_host_support_fs_ls_low_power_default 0 ++ ++/** Specifies the PHY clock rate in low power mode when connected to a ++ * Low Speed device in host mode. This parameter is applicable only if ++ * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS ++ * then defaults to 6 MHZ otherwise 48 MHZ. ++ * ++ * 0 - 48 MHz ++ * 1 - 6 MHz ++ */ ++extern int dwc_otg_set_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * ++ core_if, int32_t val); ++extern int32_t dwc_otg_get_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * ++ core_if); ++#define dwc_param_host_ls_low_power_phy_clk_default 0 ++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0 ++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1 ++ ++/** ++ * 0 - Use cC FIFO size parameters ++ * 1 - Allow dynamic FIFO sizing (default) ++ */ ++extern int dwc_otg_set_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_enable_dynamic_fifo(dwc_otg_core_if_t * ++ core_if); ++#define dwc_param_enable_dynamic_fifo_default 1 ++ ++/** Total number of 4-byte words in the data FIFO memory. This ++ * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic ++ * Tx FIFOs. ++ * 32 to 32768 (default 8192) ++ * Note: The total FIFO memory depth in the FPGA configuration is 8192. ++ */ ++extern int dwc_otg_set_param_data_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_data_fifo_size(dwc_otg_core_if_t * core_if); ++//#define dwc_param_data_fifo_size_default 8192 ++#define dwc_param_data_fifo_size_default 0xFF0 // Broadcom BCM2708 ++ ++/** Number of 4-byte words in the Rx FIFO in device mode when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1064) ++ */ ++extern int dwc_otg_set_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if); ++#define dwc_param_dev_rx_fifo_size_default 1064 ++ ++/** Number of 4-byte words in the non-periodic Tx FIFO in device mode ++ * when dynamic FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++extern int dwc_otg_set_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if, int32_t val); ++extern int32_t dwc_otg_get_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if); ++#define dwc_param_dev_nperio_tx_fifo_size_default 1024 ++ ++/** Number of 4-byte words in each of the periodic Tx FIFOs in device ++ * mode when dynamic FIFO sizing is enabled. ++ * 4 to 768 (default 256) ++ */ ++extern int dwc_otg_set_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val, int fifo_num); ++extern int32_t dwc_otg_get_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if, int fifo_num); ++#define dwc_param_dev_perio_tx_fifo_size_default 256 ++ ++/** Number of 4-byte words in the Rx FIFO in host mode when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++extern int dwc_otg_set_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if); ++//#define dwc_param_host_rx_fifo_size_default 1024 ++#define dwc_param_host_rx_fifo_size_default 774 // Broadcom BCM2708 ++ ++/** Number of 4-byte words in the non-periodic Tx FIFO in host mode ++ * when Dynamic FIFO sizing is enabled in the core. ++ * 16 to 32768 (default 1024) ++ */ ++extern int dwc_otg_set_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if, int32_t val); ++extern int32_t dwc_otg_get_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if); ++//#define dwc_param_host_nperio_tx_fifo_size_default 1024 ++#define dwc_param_host_nperio_tx_fifo_size_default 0x100 // Broadcom BCM2708 ++ ++/** Number of 4-byte words in the host periodic Tx FIFO when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++extern int dwc_otg_set_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if, int32_t val); ++extern int32_t dwc_otg_get_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if); ++//#define dwc_param_host_perio_tx_fifo_size_default 1024 ++#define dwc_param_host_perio_tx_fifo_size_default 0x200 // Broadcom BCM2708 ++ ++/** The maximum transfer size supported in bytes. ++ * 2047 to 65,535 (default 65,535) ++ */ ++extern int dwc_otg_set_param_max_transfer_size(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_max_transfer_size(dwc_otg_core_if_t * core_if); ++#define dwc_param_max_transfer_size_default 65535 ++ ++/** The maximum number of packets in a transfer. ++ * 15 to 511 (default 511) ++ */ ++extern int dwc_otg_set_param_max_packet_count(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_max_packet_count(dwc_otg_core_if_t * core_if); ++#define dwc_param_max_packet_count_default 511 ++ ++/** The number of host channel registers to use. ++ * 1 to 16 (default 12) ++ * Note: The FPGA configuration supports a maximum of 12 host channels. ++ */ ++extern int dwc_otg_set_param_host_channels(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_host_channels(dwc_otg_core_if_t * core_if); ++//#define dwc_param_host_channels_default 12 ++#define dwc_param_host_channels_default 8 // Broadcom BCM2708 ++ ++/** The number of endpoints in addition to EP0 available for device ++ * mode operations. ++ * 1 to 15 (default 6 IN and OUT) ++ * Note: The FPGA configuration supports a maximum of 6 IN and OUT ++ * endpoints in addition to EP0. ++ */ ++extern int dwc_otg_set_param_dev_endpoints(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_dev_endpoints(dwc_otg_core_if_t * core_if); ++#define dwc_param_dev_endpoints_default 6 ++ ++/** ++ * Specifies the type of PHY interface to use. By default, the driver ++ * will automatically detect the phy_type. ++ * ++ * 0 - Full Speed PHY ++ * 1 - UTMI+ (default) ++ * 2 - ULPI ++ */ ++extern int dwc_otg_set_param_phy_type(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_param_phy_type(dwc_otg_core_if_t * core_if); ++#define DWC_PHY_TYPE_PARAM_FS 0 ++#define DWC_PHY_TYPE_PARAM_UTMI 1 ++#define DWC_PHY_TYPE_PARAM_ULPI 2 ++#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI ++ ++/** ++ * Specifies the UTMI+ Data Width. This parameter is ++ * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI ++ * PHY_TYPE, this parameter indicates the data width between ++ * the MAC and the ULPI Wrapper.) Also, this parameter is ++ * applicable only if the OTG_HSPHY_WIDTH cC parameter was set ++ * to "8 and 16 bits", meaning that the core has been ++ * configured to work at either data path width. ++ * ++ * 8 or 16 bits (default 16) ++ */ ++extern int dwc_otg_set_param_phy_utmi_width(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_phy_utmi_width(dwc_otg_core_if_t * core_if); ++//#define dwc_param_phy_utmi_width_default 16 ++#define dwc_param_phy_utmi_width_default 8 // Broadcom BCM2708 ++ ++/** ++ * Specifies whether the ULPI operates at double or single ++ * data rate. This parameter is only applicable if PHY_TYPE is ++ * ULPI. ++ * ++ * 0 - single data rate ULPI interface with 8 bit wide data ++ * bus (default) ++ * 1 - double data rate ULPI interface with 4 bit wide data ++ * bus ++ */ ++extern int dwc_otg_set_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if); ++#define dwc_param_phy_ulpi_ddr_default 0 ++ ++/** ++ * Specifies whether to use the internal or external supply to ++ * drive the vbus with a ULPI phy. ++ */ ++extern int dwc_otg_set_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if); ++#define DWC_PHY_ULPI_INTERNAL_VBUS 0 ++#define DWC_PHY_ULPI_EXTERNAL_VBUS 1 ++#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS ++ ++/** ++ * Specifies whether to use the I2Cinterface for full speed PHY. This ++ * parameter is only applicable if PHY_TYPE is FS. ++ * 0 - No (default) ++ * 1 - Yes ++ */ ++extern int dwc_otg_set_param_i2c_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_i2c_enable(dwc_otg_core_if_t * core_if); ++#define dwc_param_i2c_enable_default 0 ++ ++extern int dwc_otg_set_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if); ++#define dwc_param_ulpi_fs_ls_default 0 ++ ++extern int dwc_otg_set_param_ts_dline(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_param_ts_dline(dwc_otg_core_if_t * core_if); ++#define dwc_param_ts_dline_default 0 ++ ++/** ++ * Specifies whether dedicated transmit FIFOs are ++ * enabled for non periodic IN endpoints in device mode ++ * 0 - No ++ * 1 - Yes ++ */ ++extern int dwc_otg_set_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_en_multiple_tx_fifo(dwc_otg_core_if_t * ++ core_if); ++#define dwc_param_en_multiple_tx_fifo_default 1 ++ ++/** Number of 4-byte words in each of the Tx FIFOs in device ++ * mode when dynamic FIFO sizing is enabled. ++ * 4 to 768 (default 256) ++ */ ++extern int dwc_otg_set_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int fifo_num, int32_t val); ++extern int32_t dwc_otg_get_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int fifo_num); ++#define dwc_param_dev_tx_fifo_size_default 768 ++ ++/** Thresholding enable flag- ++ * bit 0 - enable non-ISO Tx thresholding ++ * bit 1 - enable ISO Tx thresholding ++ * bit 2 - enable Rx thresholding ++ */ ++extern int dwc_otg_set_param_thr_ctl(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_thr_ctl(dwc_otg_core_if_t * core_if, int fifo_num); ++#define dwc_param_thr_ctl_default 0 ++ ++/** Thresholding length for Tx ++ * FIFOs in 32 bit DWORDs ++ */ ++extern int dwc_otg_set_param_tx_thr_length(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_tx_thr_length(dwc_otg_core_if_t * core_if); ++#define dwc_param_tx_thr_length_default 64 ++ ++/** Thresholding length for Rx ++ * FIFOs in 32 bit DWORDs ++ */ ++extern int dwc_otg_set_param_rx_thr_length(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_rx_thr_length(dwc_otg_core_if_t * core_if); ++#define dwc_param_rx_thr_length_default 64 ++ ++/** ++ * Specifies whether LPM (Link Power Management) support is enabled ++ */ ++extern int dwc_otg_set_param_lpm_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_lpm_enable(dwc_otg_core_if_t * core_if); ++#define dwc_param_lpm_enable_default 1 ++ ++/** ++ * Specifies whether PTI enhancement is enabled ++ */ ++extern int dwc_otg_set_param_pti_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_pti_enable(dwc_otg_core_if_t * core_if); ++#define dwc_param_pti_enable_default 0 ++ ++/** ++ * Specifies whether MPI enhancement is enabled ++ */ ++extern int dwc_otg_set_param_mpi_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_mpi_enable(dwc_otg_core_if_t * core_if); ++#define dwc_param_mpi_enable_default 0 ++ ++/** ++ * Specifies whether ADP capability is enabled ++ */ ++extern int dwc_otg_set_param_adp_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_adp_enable(dwc_otg_core_if_t * core_if); ++#define dwc_param_adp_enable_default 0 ++ ++/** ++ * Specifies whether IC_USB capability is enabled ++ */ ++ ++extern int dwc_otg_set_param_ic_usb_cap(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_ic_usb_cap(dwc_otg_core_if_t * core_if); ++#define dwc_param_ic_usb_cap_default 0 ++ ++extern int dwc_otg_set_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if); ++#define dwc_param_ahb_thr_ratio_default 0 ++ ++extern int dwc_otg_set_param_power_down(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_power_down(dwc_otg_core_if_t * core_if); ++#define dwc_param_power_down_default 0 ++ ++extern int dwc_otg_set_param_reload_ctl(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_reload_ctl(dwc_otg_core_if_t * core_if); ++#define dwc_param_reload_ctl_default 0 ++ ++extern int dwc_otg_set_param_dev_out_nak(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_dev_out_nak(dwc_otg_core_if_t * core_if); ++#define dwc_param_dev_out_nak_default 0 ++ ++extern int dwc_otg_set_param_cont_on_bna(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_cont_on_bna(dwc_otg_core_if_t * core_if); ++#define dwc_param_cont_on_bna_default 0 ++ ++extern int dwc_otg_set_param_ahb_single(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_ahb_single(dwc_otg_core_if_t * core_if); ++#define dwc_param_ahb_single_default 0 ++ ++extern int dwc_otg_set_param_otg_ver(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_param_otg_ver(dwc_otg_core_if_t * core_if); ++#define dwc_param_otg_ver_default 0 ++ ++/** @} */ ++ ++/** @name Access to registers and bit-fields */ ++ ++/** ++ * Dump core registers and SPRAM ++ */ ++extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_dump_spram(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t * _core_if); ++ ++/** ++ * Get host negotiation status. ++ */ ++extern uint32_t dwc_otg_get_hnpstatus(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get srp status ++ */ ++extern uint32_t dwc_otg_get_srpstatus(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Set hnpreq bit in the GOTGCTL register. ++ */ ++extern void dwc_otg_set_hnpreq(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get Content of SNPSID register. ++ */ ++extern uint32_t dwc_otg_get_gsnpsid(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get current mode. ++ * Returns 0 if in device mode, and 1 if in host mode. ++ */ ++extern uint32_t dwc_otg_get_mode(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get value of hnpcapable field in the GUSBCFG register ++ */ ++extern uint32_t dwc_otg_get_hnpcapable(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of hnpcapable field in the GUSBCFG register ++ */ ++extern void dwc_otg_set_hnpcapable(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of srpcapable field in the GUSBCFG register ++ */ ++extern uint32_t dwc_otg_get_srpcapable(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of srpcapable field in the GUSBCFG register ++ */ ++extern void dwc_otg_set_srpcapable(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of devspeed field in the DCFG register ++ */ ++extern uint32_t dwc_otg_get_devspeed(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of devspeed field in the DCFG register ++ */ ++extern void dwc_otg_set_devspeed(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get the value of busconnected field from the HPRT0 register ++ */ ++extern uint32_t dwc_otg_get_busconnected(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Gets the device enumeration Speed. ++ */ ++extern uint32_t dwc_otg_get_enumspeed(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get value of prtpwr field from the HPRT0 register ++ */ ++extern uint32_t dwc_otg_get_prtpower(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get value of flag indicating core state - hibernated or not ++ */ ++extern uint32_t dwc_otg_get_core_state(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Set value of prtpwr field from the HPRT0 register ++ */ ++extern void dwc_otg_set_prtpower(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of prtsusp field from the HPRT0 regsiter ++ */ ++extern uint32_t dwc_otg_get_prtsuspend(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of prtpwr field from the HPRT0 register ++ */ ++extern void dwc_otg_set_prtsuspend(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of ModeChTimEn field from the HCFG regsiter ++ */ ++extern uint32_t dwc_otg_get_mode_ch_tim(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of ModeChTimEn field from the HCFG regsiter ++ */ ++extern void dwc_otg_set_mode_ch_tim(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of Fram Interval field from the HFIR regsiter ++ */ ++extern uint32_t dwc_otg_get_fr_interval(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of Frame Interval field from the HFIR regsiter ++ */ ++extern void dwc_otg_set_fr_interval(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Set value of prtres field from the HPRT0 register ++ *FIXME Remove? ++ */ ++extern void dwc_otg_set_prtresume(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of rmtwkupsig bit in DCTL register ++ */ ++extern uint32_t dwc_otg_get_remotewakesig(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get value of prt_sleep_sts field from the GLPMCFG register ++ */ ++extern uint32_t dwc_otg_get_lpm_portsleepstatus(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get value of rem_wkup_en field from the GLPMCFG register ++ */ ++extern uint32_t dwc_otg_get_lpm_remotewakeenabled(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get value of appl_resp field from the GLPMCFG register ++ */ ++extern uint32_t dwc_otg_get_lpmresponse(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of appl_resp field from the GLPMCFG register ++ */ ++extern void dwc_otg_set_lpmresponse(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of hsic_connect field from the GLPMCFG register ++ */ ++extern uint32_t dwc_otg_get_hsic_connect(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of hsic_connect field from the GLPMCFG register ++ */ ++extern void dwc_otg_set_hsic_connect(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of inv_sel_hsic field from the GLPMCFG register. ++ */ ++extern uint32_t dwc_otg_get_inv_sel_hsic(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of inv_sel_hsic field from the GLPMFG register. ++ */ ++extern void dwc_otg_set_inv_sel_hsic(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/* ++ * Some functions for accessing registers ++ */ ++ ++/** ++ * GOTGCTL register ++ */ ++extern uint32_t dwc_otg_get_gotgctl(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_gotgctl(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * GUSBCFG register ++ */ ++extern uint32_t dwc_otg_get_gusbcfg(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_gusbcfg(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * GRXFSIZ register ++ */ ++extern uint32_t dwc_otg_get_grxfsiz(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_grxfsiz(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * GNPTXFSIZ register ++ */ ++extern uint32_t dwc_otg_get_gnptxfsiz(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_gnptxfsiz(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++extern uint32_t dwc_otg_get_gpvndctl(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_gpvndctl(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * GGPIO register ++ */ ++extern uint32_t dwc_otg_get_ggpio(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_ggpio(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * GUID register ++ */ ++extern uint32_t dwc_otg_get_guid(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_guid(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * HPRT0 register ++ */ ++extern uint32_t dwc_otg_get_hprt0(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_hprt0(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * GHPTXFSIZE ++ */ ++extern uint32_t dwc_otg_get_hptxfsiz(dwc_otg_core_if_t * core_if); ++ ++/** @} */ ++ ++#endif /* __DWC_CORE_IF_H__ */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_dbg.h +@@ -0,0 +1,116 @@ ++/* ========================================================================== ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#ifndef __DWC_OTG_DBG_H__ ++#define __DWC_OTG_DBG_H__ ++ ++/** @file ++ * This file defines debug levels. ++ * Debugging support vanishes in non-debug builds. ++ */ ++ ++/** ++ * The Debug Level bit-mask variable. ++ */ ++extern uint32_t g_dbg_lvl; ++/** ++ * Set the Debug Level variable. ++ */ ++static inline uint32_t SET_DEBUG_LEVEL(const uint32_t new) ++{ ++ uint32_t old = g_dbg_lvl; ++ g_dbg_lvl = new; ++ return old; ++} ++ ++/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */ ++#define DBG_CIL (0x2) ++/** When debug level has the DBG_CILV bit set, display CIL Verbose debug ++ * messages */ ++#define DBG_CILV (0x20) ++/** When debug level has the DBG_PCD bit set, display PCD (Device) debug ++ * messages */ ++#define DBG_PCD (0x4) ++/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug ++ * messages */ ++#define DBG_PCDV (0x40) ++/** When debug level has the DBG_HCD bit set, display Host debug messages */ ++#define DBG_HCD (0x8) ++/** When debug level has the DBG_HCDV bit set, display Verbose Host debug ++ * messages */ ++#define DBG_HCDV (0x80) ++/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host ++ * mode. */ ++#define DBG_HCD_URB (0x800) ++/** When debug level has the DBG_HCDI bit set, display host interrupt ++ * messages. */ ++#define DBG_HCDI (0x1000) ++ ++/** When debug level has any bit set, display debug messages */ ++#define DBG_ANY (0xFF) ++ ++/** All debug messages off */ ++#define DBG_OFF 0 ++ ++/** Prefix string for DWC_DEBUG print macros. */ ++#define USB_DWC "DWC_otg: " ++ ++/** ++ * Print a debug message when the Global debug level variable contains ++ * the bit defined in <code>lvl</code>. ++ * ++ * @param[in] lvl - Debug level, use one of the DBG_ constants above. ++ * @param[in] x - like printf ++ * ++ * Example:<p> ++ * <code> ++ * DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr); ++ * </code> ++ * <br> ++ * results in:<br> ++ * <code> ++ * usb-DWC_otg: dwc_otg_cil_init(ca867000) ++ * </code> ++ */ ++#ifdef DEBUG ++ ++# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)__DWC_DEBUG(USB_DWC x ); }while(0) ++# define DWC_DEBUGP(x...) DWC_DEBUGPL(DBG_ANY, x ) ++ ++# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl) ++ ++#else ++ ++# define DWC_DEBUGPL(lvl, x...) do{}while(0) ++# define DWC_DEBUGP(x...) ++ ++# define CHK_DEBUG_LEVEL(level) (0) ++ ++#endif /*DEBUG*/ ++#endif +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.c +@@ -0,0 +1,1700 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.c $ ++ * $Revision: #92 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++/** @file ++ * The dwc_otg_driver module provides the initialization and cleanup entry ++ * points for the DWC_otg driver. This module will be dynamically installed ++ * after Linux is booted using the insmod command. When the module is ++ * installed, the dwc_otg_driver_init function is called. When the module is ++ * removed (using rmmod), the dwc_otg_driver_cleanup function is called. ++ * ++ * This module also defines a data structure for the dwc_otg_driver, which is ++ * used in conjunction with the standard ARM lm_device structure. These ++ * structures allow the OTG driver to comply with the standard Linux driver ++ * model in which devices and drivers are registered with a bus driver. This ++ * has the benefit that Linux can expose attributes of the driver and device ++ * in its special sysfs file system. Users can then read or write files in ++ * this file system to perform diagnostics on the driver components or the ++ * device. ++ */ ++ ++#include "dwc_otg_os_dep.h" ++#include "dwc_os.h" ++#include "dwc_otg_dbg.h" ++#include "dwc_otg_driver.h" ++#include "dwc_otg_attr.h" ++#include "dwc_otg_core_if.h" ++#include "dwc_otg_pcd_if.h" ++#include "dwc_otg_hcd_if.h" ++ ++#define DWC_DRIVER_VERSION "3.00a 10-AUG-2012" ++#define DWC_DRIVER_DESC "HS OTG USB Controller driver" ++ ++bool microframe_schedule=true; ++ ++static const char dwc_driver_name[] = "dwc_otg"; ++ ++extern int pcd_init( ++#ifdef LM_INTERFACE ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *_dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *dev ++#endif ++ ); ++extern int hcd_init( ++#ifdef LM_INTERFACE ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *_dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *dev ++#endif ++ ); ++ ++extern int pcd_remove( ++#ifdef LM_INTERFACE ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *_dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *_dev ++#endif ++ ); ++ ++extern void hcd_remove( ++#ifdef LM_INTERFACE ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *_dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *_dev ++#endif ++ ); ++ ++extern void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host); ++ ++/*-------------------------------------------------------------------------*/ ++/* Encapsulate the module parameter settings */ ++ ++struct dwc_otg_driver_module_params { ++ int32_t opt; ++ int32_t otg_cap; ++ int32_t dma_enable; ++ int32_t dma_desc_enable; ++ int32_t dma_burst_size; ++ int32_t speed; ++ int32_t host_support_fs_ls_low_power; ++ int32_t host_ls_low_power_phy_clk; ++ int32_t enable_dynamic_fifo; ++ int32_t data_fifo_size; ++ int32_t dev_rx_fifo_size; ++ int32_t dev_nperio_tx_fifo_size; ++ uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS]; ++ int32_t host_rx_fifo_size; ++ int32_t host_nperio_tx_fifo_size; ++ int32_t host_perio_tx_fifo_size; ++ int32_t max_transfer_size; ++ int32_t max_packet_count; ++ int32_t host_channels; ++ int32_t dev_endpoints; ++ int32_t phy_type; ++ int32_t phy_utmi_width; ++ int32_t phy_ulpi_ddr; ++ int32_t phy_ulpi_ext_vbus; ++ int32_t i2c_enable; ++ int32_t ulpi_fs_ls; ++ int32_t ts_dline; ++ int32_t en_multiple_tx_fifo; ++ uint32_t dev_tx_fifo_size[MAX_TX_FIFOS]; ++ uint32_t thr_ctl; ++ uint32_t tx_thr_length; ++ uint32_t rx_thr_length; ++ int32_t pti_enable; ++ int32_t mpi_enable; ++ int32_t lpm_enable; ++ int32_t ic_usb_cap; ++ int32_t ahb_thr_ratio; ++ int32_t power_down; ++ int32_t reload_ctl; ++ int32_t dev_out_nak; ++ int32_t cont_on_bna; ++ int32_t ahb_single; ++ int32_t otg_ver; ++ int32_t adp_enable; ++}; ++ ++static struct dwc_otg_driver_module_params dwc_otg_module_params = { ++ .opt = -1, ++ .otg_cap = -1, ++ .dma_enable = -1, ++ .dma_desc_enable = -1, ++ .dma_burst_size = -1, ++ .speed = -1, ++ .host_support_fs_ls_low_power = -1, ++ .host_ls_low_power_phy_clk = -1, ++ .enable_dynamic_fifo = -1, ++ .data_fifo_size = -1, ++ .dev_rx_fifo_size = -1, ++ .dev_nperio_tx_fifo_size = -1, ++ .dev_perio_tx_fifo_size = { ++ /* dev_perio_tx_fifo_size_1 */ ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1 ++ /* 15 */ ++ }, ++ .host_rx_fifo_size = -1, ++ .host_nperio_tx_fifo_size = -1, ++ .host_perio_tx_fifo_size = -1, ++ .max_transfer_size = -1, ++ .max_packet_count = -1, ++ .host_channels = -1, ++ .dev_endpoints = -1, ++ .phy_type = -1, ++ .phy_utmi_width = -1, ++ .phy_ulpi_ddr = -1, ++ .phy_ulpi_ext_vbus = -1, ++ .i2c_enable = -1, ++ .ulpi_fs_ls = -1, ++ .ts_dline = -1, ++ .en_multiple_tx_fifo = -1, ++ .dev_tx_fifo_size = { ++ /* dev_tx_fifo_size */ ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1 ++ /* 15 */ ++ }, ++ .thr_ctl = -1, ++ .tx_thr_length = -1, ++ .rx_thr_length = -1, ++ .pti_enable = -1, ++ .mpi_enable = -1, ++ .lpm_enable = -1, ++ .ic_usb_cap = -1, ++ .ahb_thr_ratio = -1, ++ .power_down = -1, ++ .reload_ctl = -1, ++ .dev_out_nak = -1, ++ .cont_on_bna = -1, ++ .ahb_single = -1, ++ .otg_ver = -1, ++ .adp_enable = -1, ++}; ++ ++/** ++ * This function shows the Driver Version. ++ */ ++static ssize_t version_show(struct device_driver *dev, char *buf) ++{ ++ return snprintf(buf, sizeof(DWC_DRIVER_VERSION) + 2, "%s\n", ++ DWC_DRIVER_VERSION); ++} ++ ++static DRIVER_ATTR(version, S_IRUGO, version_show, NULL); ++ ++/** ++ * Global Debug Level Mask. ++ */ ++uint32_t g_dbg_lvl = 0; /* OFF */ ++ ++/** ++ * This function shows the driver Debug Level. ++ */ ++static ssize_t dbg_level_show(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "0x%0x\n", g_dbg_lvl); ++} ++ ++/** ++ * This function stores the driver Debug Level. ++ */ ++static ssize_t dbg_level_store(struct device_driver *drv, const char *buf, ++ size_t count) ++{ ++ g_dbg_lvl = simple_strtoul(buf, NULL, 16); ++ return count; ++} ++ ++static DRIVER_ATTR(debuglevel, S_IRUGO | S_IWUSR, dbg_level_show, ++ dbg_level_store); ++ ++/** ++ * This function is called during module intialization ++ * to pass module parameters to the DWC_OTG CORE. ++ */ ++static int set_parameters(dwc_otg_core_if_t * core_if) ++{ ++ int retval = 0; ++ int i; ++ ++ if (dwc_otg_module_params.otg_cap != -1) { ++ retval += ++ dwc_otg_set_param_otg_cap(core_if, ++ dwc_otg_module_params.otg_cap); ++ } ++ if (dwc_otg_module_params.dma_enable != -1) { ++ retval += ++ dwc_otg_set_param_dma_enable(core_if, ++ dwc_otg_module_params. ++ dma_enable); ++ } ++ if (dwc_otg_module_params.dma_desc_enable != -1) { ++ retval += ++ dwc_otg_set_param_dma_desc_enable(core_if, ++ dwc_otg_module_params. ++ dma_desc_enable); ++ } ++ if (dwc_otg_module_params.opt != -1) { ++ retval += ++ dwc_otg_set_param_opt(core_if, dwc_otg_module_params.opt); ++ } ++ if (dwc_otg_module_params.dma_burst_size != -1) { ++ retval += ++ dwc_otg_set_param_dma_burst_size(core_if, ++ dwc_otg_module_params. ++ dma_burst_size); ++ } ++ if (dwc_otg_module_params.host_support_fs_ls_low_power != -1) { ++ retval += ++ dwc_otg_set_param_host_support_fs_ls_low_power(core_if, ++ dwc_otg_module_params. ++ host_support_fs_ls_low_power); ++ } ++ if (dwc_otg_module_params.enable_dynamic_fifo != -1) { ++ retval += ++ dwc_otg_set_param_enable_dynamic_fifo(core_if, ++ dwc_otg_module_params. ++ enable_dynamic_fifo); ++ } ++ if (dwc_otg_module_params.data_fifo_size != -1) { ++ retval += ++ dwc_otg_set_param_data_fifo_size(core_if, ++ dwc_otg_module_params. ++ data_fifo_size); ++ } ++ if (dwc_otg_module_params.dev_rx_fifo_size != -1) { ++ retval += ++ dwc_otg_set_param_dev_rx_fifo_size(core_if, ++ dwc_otg_module_params. ++ dev_rx_fifo_size); ++ } ++ if (dwc_otg_module_params.dev_nperio_tx_fifo_size != -1) { ++ retval += ++ dwc_otg_set_param_dev_nperio_tx_fifo_size(core_if, ++ dwc_otg_module_params. ++ dev_nperio_tx_fifo_size); ++ } ++ if (dwc_otg_module_params.host_rx_fifo_size != -1) { ++ retval += ++ dwc_otg_set_param_host_rx_fifo_size(core_if, ++ dwc_otg_module_params.host_rx_fifo_size); ++ } ++ if (dwc_otg_module_params.host_nperio_tx_fifo_size != -1) { ++ retval += ++ dwc_otg_set_param_host_nperio_tx_fifo_size(core_if, ++ dwc_otg_module_params. ++ host_nperio_tx_fifo_size); ++ } ++ if (dwc_otg_module_params.host_perio_tx_fifo_size != -1) { ++ retval += ++ dwc_otg_set_param_host_perio_tx_fifo_size(core_if, ++ dwc_otg_module_params. ++ host_perio_tx_fifo_size); ++ } ++ if (dwc_otg_module_params.max_transfer_size != -1) { ++ retval += ++ dwc_otg_set_param_max_transfer_size(core_if, ++ dwc_otg_module_params. ++ max_transfer_size); ++ } ++ if (dwc_otg_module_params.max_packet_count != -1) { ++ retval += ++ dwc_otg_set_param_max_packet_count(core_if, ++ dwc_otg_module_params. ++ max_packet_count); ++ } ++ if (dwc_otg_module_params.host_channels != -1) { ++ retval += ++ dwc_otg_set_param_host_channels(core_if, ++ dwc_otg_module_params. ++ host_channels); ++ } ++ if (dwc_otg_module_params.dev_endpoints != -1) { ++ retval += ++ dwc_otg_set_param_dev_endpoints(core_if, ++ dwc_otg_module_params. ++ dev_endpoints); ++ } ++ if (dwc_otg_module_params.phy_type != -1) { ++ retval += ++ dwc_otg_set_param_phy_type(core_if, ++ dwc_otg_module_params.phy_type); ++ } ++ if (dwc_otg_module_params.speed != -1) { ++ retval += ++ dwc_otg_set_param_speed(core_if, ++ dwc_otg_module_params.speed); ++ } ++ if (dwc_otg_module_params.host_ls_low_power_phy_clk != -1) { ++ retval += ++ dwc_otg_set_param_host_ls_low_power_phy_clk(core_if, ++ dwc_otg_module_params. ++ host_ls_low_power_phy_clk); ++ } ++ if (dwc_otg_module_params.phy_ulpi_ddr != -1) { ++ retval += ++ dwc_otg_set_param_phy_ulpi_ddr(core_if, ++ dwc_otg_module_params. ++ phy_ulpi_ddr); ++ } ++ if (dwc_otg_module_params.phy_ulpi_ext_vbus != -1) { ++ retval += ++ dwc_otg_set_param_phy_ulpi_ext_vbus(core_if, ++ dwc_otg_module_params. ++ phy_ulpi_ext_vbus); ++ } ++ if (dwc_otg_module_params.phy_utmi_width != -1) { ++ retval += ++ dwc_otg_set_param_phy_utmi_width(core_if, ++ dwc_otg_module_params. ++ phy_utmi_width); ++ } ++ if (dwc_otg_module_params.ulpi_fs_ls != -1) { ++ retval += ++ dwc_otg_set_param_ulpi_fs_ls(core_if, ++ dwc_otg_module_params.ulpi_fs_ls); ++ } ++ if (dwc_otg_module_params.ts_dline != -1) { ++ retval += ++ dwc_otg_set_param_ts_dline(core_if, ++ dwc_otg_module_params.ts_dline); ++ } ++ if (dwc_otg_module_params.i2c_enable != -1) { ++ retval += ++ dwc_otg_set_param_i2c_enable(core_if, ++ dwc_otg_module_params. ++ i2c_enable); ++ } ++ if (dwc_otg_module_params.en_multiple_tx_fifo != -1) { ++ retval += ++ dwc_otg_set_param_en_multiple_tx_fifo(core_if, ++ dwc_otg_module_params. ++ en_multiple_tx_fifo); ++ } ++ for (i = 0; i < 15; i++) { ++ if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) { ++ retval += ++ dwc_otg_set_param_dev_perio_tx_fifo_size(core_if, ++ dwc_otg_module_params. ++ dev_perio_tx_fifo_size ++ [i], i); ++ } ++ } ++ ++ for (i = 0; i < 15; i++) { ++ if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) { ++ retval += dwc_otg_set_param_dev_tx_fifo_size(core_if, ++ dwc_otg_module_params. ++ dev_tx_fifo_size ++ [i], i); ++ } ++ } ++ if (dwc_otg_module_params.thr_ctl != -1) { ++ retval += ++ dwc_otg_set_param_thr_ctl(core_if, ++ dwc_otg_module_params.thr_ctl); ++ } ++ if (dwc_otg_module_params.mpi_enable != -1) { ++ retval += ++ dwc_otg_set_param_mpi_enable(core_if, ++ dwc_otg_module_params. ++ mpi_enable); ++ } ++ if (dwc_otg_module_params.pti_enable != -1) { ++ retval += ++ dwc_otg_set_param_pti_enable(core_if, ++ dwc_otg_module_params. ++ pti_enable); ++ } ++ if (dwc_otg_module_params.lpm_enable != -1) { ++ retval += ++ dwc_otg_set_param_lpm_enable(core_if, ++ dwc_otg_module_params. ++ lpm_enable); ++ } ++ if (dwc_otg_module_params.ic_usb_cap != -1) { ++ retval += ++ dwc_otg_set_param_ic_usb_cap(core_if, ++ dwc_otg_module_params. ++ ic_usb_cap); ++ } ++ if (dwc_otg_module_params.tx_thr_length != -1) { ++ retval += ++ dwc_otg_set_param_tx_thr_length(core_if, ++ dwc_otg_module_params.tx_thr_length); ++ } ++ if (dwc_otg_module_params.rx_thr_length != -1) { ++ retval += ++ dwc_otg_set_param_rx_thr_length(core_if, ++ dwc_otg_module_params. ++ rx_thr_length); ++ } ++ if (dwc_otg_module_params.ahb_thr_ratio != -1) { ++ retval += ++ dwc_otg_set_param_ahb_thr_ratio(core_if, ++ dwc_otg_module_params.ahb_thr_ratio); ++ } ++ if (dwc_otg_module_params.power_down != -1) { ++ retval += ++ dwc_otg_set_param_power_down(core_if, ++ dwc_otg_module_params.power_down); ++ } ++ if (dwc_otg_module_params.reload_ctl != -1) { ++ retval += ++ dwc_otg_set_param_reload_ctl(core_if, ++ dwc_otg_module_params.reload_ctl); ++ } ++ ++ if (dwc_otg_module_params.dev_out_nak != -1) { ++ retval += ++ dwc_otg_set_param_dev_out_nak(core_if, ++ dwc_otg_module_params.dev_out_nak); ++ } ++ ++ if (dwc_otg_module_params.cont_on_bna != -1) { ++ retval += ++ dwc_otg_set_param_cont_on_bna(core_if, ++ dwc_otg_module_params.cont_on_bna); ++ } ++ ++ if (dwc_otg_module_params.ahb_single != -1) { ++ retval += ++ dwc_otg_set_param_ahb_single(core_if, ++ dwc_otg_module_params.ahb_single); ++ } ++ ++ if (dwc_otg_module_params.otg_ver != -1) { ++ retval += ++ dwc_otg_set_param_otg_ver(core_if, ++ dwc_otg_module_params.otg_ver); ++ } ++ if (dwc_otg_module_params.adp_enable != -1) { ++ retval += ++ dwc_otg_set_param_adp_enable(core_if, ++ dwc_otg_module_params. ++ adp_enable); ++ } ++ return retval; ++} ++ ++/** ++ * This function is the top level interrupt handler for the Common ++ * (Device and host modes) interrupts. ++ */ ++static irqreturn_t dwc_otg_common_irq(int irq, void *dev) ++{ ++ int32_t retval = IRQ_NONE; ++ ++ retval = dwc_otg_handle_common_intr(dev); ++ if (retval != 0) { ++ S3C2410X_CLEAR_EINTPEND(); ++ } ++ return IRQ_RETVAL(retval); ++} ++ ++/** ++ * This function is called when a lm_device is unregistered with the ++ * dwc_otg_driver. This happens, for example, when the rmmod command is ++ * executed. The device may or may not be electrically present. If it is ++ * present, the driver stops device processing. Any resources used on behalf ++ * of this device are freed. ++ * ++ * @param _dev ++ */ ++#ifdef LM_INTERFACE ++#define REM_RETVAL(n) ++static void dwc_otg_driver_remove( struct lm_device *_dev ) ++{ dwc_otg_device_t *otg_dev = lm_get_drvdata(_dev); ++#elif defined(PCI_INTERFACE) ++#define REM_RETVAL(n) ++static void dwc_otg_driver_remove( struct pci_dev *_dev ) ++{ dwc_otg_device_t *otg_dev = pci_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++#define REM_RETVAL(n) n ++static int dwc_otg_driver_remove( struct platform_device *_dev ) ++{ dwc_otg_device_t *otg_dev = platform_get_drvdata(_dev); ++#endif ++ ++ DWC_DEBUGPL(DBG_ANY, "%s(%p) otg_dev %p\n", __func__, _dev, otg_dev); ++ ++ if (!otg_dev) { ++ /* Memory allocation for the dwc_otg_device failed. */ ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__); ++ return REM_RETVAL(-ENOMEM); ++ } ++#ifndef DWC_DEVICE_ONLY ++ if (otg_dev->hcd) { ++ hcd_remove(_dev); ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__); ++ return REM_RETVAL(-EINVAL); ++ } ++#endif ++ ++#ifndef DWC_HOST_ONLY ++ if (otg_dev->pcd) { ++ pcd_remove(_dev); ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->pcd NULL!\n", __func__); ++ return REM_RETVAL(-EINVAL); ++ } ++#endif ++ /* ++ * Free the IRQ ++ */ ++ if (otg_dev->common_irq_installed) { ++#ifdef PLATFORM_INTERFACE ++ free_irq(platform_get_irq(_dev, 0), otg_dev); ++#else ++ free_irq(_dev->irq, otg_dev); ++#endif ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "%s: There is no installed irq!\n", __func__); ++ return REM_RETVAL(-ENXIO); ++ } ++ ++ if (otg_dev->core_if) { ++ dwc_otg_cil_remove(otg_dev->core_if); ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->core_if NULL!\n", __func__); ++ return REM_RETVAL(-ENXIO); ++ } ++ ++ /* ++ * Remove the device attributes ++ */ ++ dwc_otg_attr_remove(_dev); ++ ++ /* ++ * Return the memory. ++ */ ++ if (otg_dev->os_dep.base) { ++ iounmap(otg_dev->os_dep.base); ++ } ++ DWC_FREE(otg_dev); ++ ++ /* ++ * Clear the drvdata pointer. ++ */ ++#ifdef LM_INTERFACE ++ lm_set_drvdata(_dev, 0); ++#elif defined(PCI_INTERFACE) ++ release_mem_region(otg_dev->os_dep.rsrc_start, ++ otg_dev->os_dep.rsrc_len); ++ pci_set_drvdata(_dev, 0); ++#elif defined(PLATFORM_INTERFACE) ++ platform_set_drvdata(_dev, 0); ++#endif ++ return REM_RETVAL(0); ++} ++ ++/** ++ * This function is called when an lm_device is bound to a ++ * dwc_otg_driver. It creates the driver components required to ++ * control the device (CIL, HCD, and PCD) and it initializes the ++ * device. The driver components are stored in a dwc_otg_device ++ * structure. A reference to the dwc_otg_device is saved in the ++ * lm_device. This allows the driver to access the dwc_otg_device ++ * structure on subsequent calls to driver methods for this device. ++ * ++ * @param _dev Bus device ++ */ ++static int dwc_otg_driver_probe( ++#ifdef LM_INTERFACE ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *_dev, ++ const struct pci_device_id *id ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *_dev ++#endif ++ ) ++{ ++ int retval = 0; ++ dwc_otg_device_t *dwc_otg_device; ++ int devirq; ++ ++ dev_dbg(&_dev->dev, "dwc_otg_driver_probe(%p)\n", _dev); ++#ifdef LM_INTERFACE ++ dev_dbg(&_dev->dev, "start=0x%08x\n", (unsigned)_dev->resource.start); ++#elif defined(PCI_INTERFACE) ++ if (!id) { ++ DWC_ERROR("Invalid pci_device_id %p", id); ++ return -EINVAL; ++ } ++ ++ if (!_dev || (pci_enable_device(_dev) < 0)) { ++ DWC_ERROR("Invalid pci_device %p", _dev); ++ return -ENODEV; ++ } ++ dev_dbg(&_dev->dev, "start=0x%08x\n", (unsigned)pci_resource_start(_dev,0)); ++ /* other stuff needed as well? */ ++ ++#elif defined(PLATFORM_INTERFACE) ++ dev_dbg(&_dev->dev, "start=0x%08x (len 0x%x)\n", ++ (unsigned)_dev->resource->start, ++ (unsigned)(_dev->resource->end - _dev->resource->start)); ++#endif ++ ++ dwc_otg_device = DWC_ALLOC(sizeof(dwc_otg_device_t)); ++ ++ if (!dwc_otg_device) { ++ dev_err(&_dev->dev, "kmalloc of dwc_otg_device failed\n"); ++ return -ENOMEM; ++ } ++ ++ memset(dwc_otg_device, 0, sizeof(*dwc_otg_device)); ++ dwc_otg_device->os_dep.reg_offset = 0xFFFFFFFF; ++ ++ /* ++ * Map the DWC_otg Core memory into virtual address space. ++ */ ++#ifdef LM_INTERFACE ++ dwc_otg_device->os_dep.base = ioremap(_dev->resource.start, SZ_256K); ++ ++ if (!dwc_otg_device->os_dep.base) { ++ dev_err(&_dev->dev, "ioremap() failed\n"); ++ DWC_FREE(dwc_otg_device); ++ return -ENOMEM; ++ } ++ dev_dbg(&_dev->dev, "base=0x%08x\n", ++ (unsigned)dwc_otg_device->os_dep.base); ++#elif defined(PCI_INTERFACE) ++ _dev->current_state = PCI_D0; ++ _dev->dev.power.power_state = PMSG_ON; ++ ++ if (!_dev->irq) { ++ DWC_ERROR("Found HC with no IRQ. Check BIOS/PCI %s setup!", ++ pci_name(_dev)); ++ iounmap(dwc_otg_device->os_dep.base); ++ DWC_FREE(dwc_otg_device); ++ return -ENODEV; ++ } ++ ++ dwc_otg_device->os_dep.rsrc_start = pci_resource_start(_dev, 0); ++ dwc_otg_device->os_dep.rsrc_len = pci_resource_len(_dev, 0); ++ DWC_DEBUGPL(DBG_ANY, "PCI resource: start=%08x, len=%08x\n", ++ (unsigned)dwc_otg_device->os_dep.rsrc_start, ++ (unsigned)dwc_otg_device->os_dep.rsrc_len); ++ if (!request_mem_region ++ (dwc_otg_device->os_dep.rsrc_start, dwc_otg_device->os_dep.rsrc_len, ++ "dwc_otg")) { ++ dev_dbg(&_dev->dev, "error requesting memory\n"); ++ iounmap(dwc_otg_device->os_dep.base); ++ DWC_FREE(dwc_otg_device); ++ return -EFAULT; ++ } ++ ++ dwc_otg_device->os_dep.base = ++ ioremap_nocache(dwc_otg_device->os_dep.rsrc_start, ++ dwc_otg_device->os_dep.rsrc_len); ++ if (dwc_otg_device->os_dep.base == NULL) { ++ dev_dbg(&_dev->dev, "error mapping memory\n"); ++ release_mem_region(dwc_otg_device->os_dep.rsrc_start, ++ dwc_otg_device->os_dep.rsrc_len); ++ iounmap(dwc_otg_device->os_dep.base); ++ DWC_FREE(dwc_otg_device); ++ return -EFAULT; ++ } ++ dev_dbg(&_dev->dev, "base=0x%p (before adjust) \n", ++ dwc_otg_device->os_dep.base); ++ dwc_otg_device->os_dep.base = (char *)dwc_otg_device->os_dep.base; ++ dev_dbg(&_dev->dev, "base=0x%p (after adjust) \n", ++ dwc_otg_device->os_dep.base); ++ dev_dbg(&_dev->dev, "%s: mapped PA 0x%x to VA 0x%p\n", __func__, ++ (unsigned)dwc_otg_device->os_dep.rsrc_start, ++ dwc_otg_device->os_dep.base); ++ ++ pci_set_master(_dev); ++ pci_set_drvdata(_dev, dwc_otg_device); ++#elif defined(PLATFORM_INTERFACE) ++ DWC_DEBUGPL(DBG_ANY,"Platform resource: start=%08x, len=%08x\n", ++ _dev->resource->start, ++ _dev->resource->end - _dev->resource->start + 1); ++#if 1 ++ if (!request_mem_region(_dev->resource->start, ++ _dev->resource->end - _dev->resource->start + 1, ++ "dwc_otg")) { ++ dev_dbg(&_dev->dev, "error reserving mapped memory\n"); ++ retval = -EFAULT; ++ goto fail; ++ } ++ ++ dwc_otg_device->os_dep.base = ioremap_nocache(_dev->resource->start, ++ _dev->resource->end - ++ _dev->resource->start+1); ++#else ++ { ++ struct map_desc desc = { ++ .virtual = IO_ADDRESS((unsigned)_dev->resource->start), ++ .pfn = __phys_to_pfn((unsigned)_dev->resource->start), ++ .length = SZ_128K, ++ .type = MT_DEVICE ++ }; ++ iotable_init(&desc, 1); ++ dwc_otg_device->os_dep.base = (void *)desc.virtual; ++ } ++#endif ++ if (!dwc_otg_device->os_dep.base) { ++ dev_err(&_dev->dev, "ioremap() failed\n"); ++ retval = -ENOMEM; ++ goto fail; ++ } ++ dev_dbg(&_dev->dev, "base=0x%08x\n", ++ (unsigned)dwc_otg_device->os_dep.base); ++#endif ++ ++ /* ++ * Initialize driver data to point to the global DWC_otg ++ * Device structure. ++ */ ++#ifdef LM_INTERFACE ++ lm_set_drvdata(_dev, dwc_otg_device); ++#elif defined(PLATFORM_INTERFACE) ++ platform_set_drvdata(_dev, dwc_otg_device); ++#endif ++ dev_dbg(&_dev->dev, "dwc_otg_device=0x%p\n", dwc_otg_device); ++ ++ dwc_otg_device->core_if = dwc_otg_cil_init(dwc_otg_device->os_dep.base); ++ DWC_DEBUGPL(DBG_HCDV, "probe of device %p given core_if %p\n", ++ dwc_otg_device, dwc_otg_device->core_if);//GRAYG ++ ++ if (!dwc_otg_device->core_if) { ++ dev_err(&_dev->dev, "CIL initialization failed!\n"); ++ retval = -ENOMEM; ++ goto fail; ++ } ++ ++ dev_dbg(&_dev->dev, "Calling get_gsnpsid\n"); ++ /* ++ * Attempt to ensure this device is really a DWC_otg Controller. ++ * Read and verify the SNPSID register contents. The value should be ++ * 0x45F42XXX or 0x45F42XXX, which corresponds to either "OT2" or "OTG3", ++ * as in "OTG version 2.XX" or "OTG version 3.XX". ++ */ ++ ++ if (((dwc_otg_get_gsnpsid(dwc_otg_device->core_if) & 0xFFFFF000) != 0x4F542000) && ++ ((dwc_otg_get_gsnpsid(dwc_otg_device->core_if) & 0xFFFFF000) != 0x4F543000)) { ++ dev_err(&_dev->dev, "Bad value for SNPSID: 0x%08x\n", ++ dwc_otg_get_gsnpsid(dwc_otg_device->core_if)); ++ retval = -EINVAL; ++ goto fail; ++ } ++ ++ /* ++ * Validate parameter values. ++ */ ++ dev_dbg(&_dev->dev, "Calling set_parameters\n"); ++ if (set_parameters(dwc_otg_device->core_if)) { ++ retval = -EINVAL; ++ goto fail; ++ } ++ ++ /* ++ * Create Device Attributes in sysfs ++ */ ++ dev_dbg(&_dev->dev, "Calling attr_create\n"); ++ dwc_otg_attr_create(_dev); ++ ++ /* ++ * Disable the global interrupt until all the interrupt ++ * handlers are installed. ++ */ ++ dev_dbg(&_dev->dev, "Calling disable_global_interrupts\n"); ++ dwc_otg_disable_global_interrupts(dwc_otg_device->core_if); ++ ++ /* ++ * Install the interrupt handler for the common interrupts before ++ * enabling common interrupts in core_init below. ++ */ ++ ++#if defined(PLATFORM_INTERFACE) ++ devirq = platform_get_irq(_dev, 0); ++#else ++ devirq = _dev->irq; ++#endif ++ DWC_DEBUGPL(DBG_CIL, "registering (common) handler for irq%d\n", ++ devirq); ++ dev_dbg(&_dev->dev, "Calling request_irq(%d)\n", devirq); ++ retval = request_irq(devirq, dwc_otg_common_irq, ++ IRQF_SHARED, ++ "dwc_otg", dwc_otg_device); ++ if (retval) { ++ DWC_ERROR("request of irq%d failed\n", devirq); ++ retval = -EBUSY; ++ goto fail; ++ } else { ++ dwc_otg_device->common_irq_installed = 1; ++ } ++ ++#ifndef IRQF_TRIGGER_LOW ++#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE) ++ dev_dbg(&_dev->dev, "Calling set_irq_type\n"); ++ set_irq_type(devirq, ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) ++ IRQT_LOW ++#else ++ IRQ_TYPE_LEVEL_LOW ++#endif ++ ); ++#endif ++#endif /*IRQF_TRIGGER_LOW*/ ++ ++ /* ++ * Initialize the DWC_otg core. ++ */ ++ dev_dbg(&_dev->dev, "Calling dwc_otg_core_init\n"); ++ dwc_otg_core_init(dwc_otg_device->core_if); ++ ++#ifndef DWC_HOST_ONLY ++ /* ++ * Initialize the PCD ++ */ ++ dev_dbg(&_dev->dev, "Calling pcd_init\n"); ++ retval = pcd_init(_dev); ++ if (retval != 0) { ++ DWC_ERROR("pcd_init failed\n"); ++ dwc_otg_device->pcd = NULL; ++ goto fail; ++ } ++#endif ++#ifndef DWC_DEVICE_ONLY ++ /* ++ * Initialize the HCD ++ */ ++ dev_dbg(&_dev->dev, "Calling hcd_init\n"); ++ retval = hcd_init(_dev); ++ if (retval != 0) { ++ DWC_ERROR("hcd_init failed\n"); ++ dwc_otg_device->hcd = NULL; ++ goto fail; ++ } ++#endif ++ /* Recover from drvdata having been overwritten by hcd_init() */ ++#ifdef LM_INTERFACE ++ lm_set_drvdata(_dev, dwc_otg_device); ++#elif defined(PLATFORM_INTERFACE) ++ platform_set_drvdata(_dev, dwc_otg_device); ++#elif defined(PCI_INTERFACE) ++ pci_set_drvdata(_dev, dwc_otg_device); ++ dwc_otg_device->os_dep.pcidev = _dev; ++#endif ++ ++ /* ++ * Enable the global interrupt after all the interrupt ++ * handlers are installed if there is no ADP support else ++ * perform initial actions required for Internal ADP logic. ++ */ ++ if (!dwc_otg_get_param_adp_enable(dwc_otg_device->core_if)) { ++ dev_dbg(&_dev->dev, "Calling enable_global_interrupts\n"); ++ dwc_otg_enable_global_interrupts(dwc_otg_device->core_if); ++ dev_dbg(&_dev->dev, "Done\n"); ++ } else ++ dwc_otg_adp_start(dwc_otg_device->core_if, ++ dwc_otg_is_host_mode(dwc_otg_device->core_if)); ++ ++ return 0; ++ ++fail: ++ dwc_otg_driver_remove(_dev); ++ return retval; ++} ++ ++/** ++ * This structure defines the methods to be called by a bus driver ++ * during the lifecycle of a device on that bus. Both drivers and ++ * devices are registered with a bus driver. The bus driver matches ++ * devices to drivers based on information in the device and driver ++ * structures. ++ * ++ * The probe function is called when the bus driver matches a device ++ * to this driver. The remove function is called when a device is ++ * unregistered with the bus driver. ++ */ ++#ifdef LM_INTERFACE ++static struct lm_driver dwc_otg_driver = { ++ .drv = {.name = (char *)dwc_driver_name,}, ++ .probe = dwc_otg_driver_probe, ++ .remove = dwc_otg_driver_remove, ++ // 'suspend' and 'resume' absent ++}; ++#elif defined(PCI_INTERFACE) ++static const struct pci_device_id pci_ids[] = { { ++ PCI_DEVICE(0x16c3, 0xabcd), ++ .driver_data = ++ (unsigned long)0xdeadbeef, ++ }, { /* end: all zeroes */ } ++}; ++ ++MODULE_DEVICE_TABLE(pci, pci_ids); ++ ++/* pci driver glue; this is a "new style" PCI driver module */ ++static struct pci_driver dwc_otg_driver = { ++ .name = "dwc_otg", ++ .id_table = pci_ids, ++ ++ .probe = dwc_otg_driver_probe, ++ .remove = dwc_otg_driver_remove, ++ ++ .driver = { ++ .name = (char *)dwc_driver_name, ++ }, ++}; ++#elif defined(PLATFORM_INTERFACE) ++static struct platform_device_id platform_ids[] = { ++ { ++ .name = "bcm2708_usb", ++ .driver_data = (kernel_ulong_t) 0xdeadbeef, ++ }, ++ { /* end: all zeroes */ } ++}; ++MODULE_DEVICE_TABLE(platform, platform_ids); ++ ++static struct platform_driver dwc_otg_driver = { ++ .driver = { ++ .name = (char *)dwc_driver_name, ++ }, ++ .id_table = platform_ids, ++ ++ .probe = dwc_otg_driver_probe, ++ .remove = dwc_otg_driver_remove, ++ // no 'shutdown', 'suspend', 'resume', 'suspend_late' or 'resume_early' ++}; ++#endif ++ ++/** ++ * This function is called when the dwc_otg_driver is installed with the ++ * insmod command. It registers the dwc_otg_driver structure with the ++ * appropriate bus driver. This will cause the dwc_otg_driver_probe function ++ * to be called. In addition, the bus driver will automatically expose ++ * attributes defined for the device and driver in the special sysfs file ++ * system. ++ * ++ * @return ++ */ ++static int __init dwc_otg_driver_init(void) ++{ ++ int retval = 0; ++ int error; ++ struct device_driver *drv; ++ printk(KERN_INFO "%s: version %s (%s bus)\n", dwc_driver_name, ++ DWC_DRIVER_VERSION, ++#ifdef LM_INTERFACE ++ "logicmodule"); ++ retval = lm_driver_register(&dwc_otg_driver); ++ drv = &dwc_otg_driver.drv; ++#elif defined(PCI_INTERFACE) ++ "pci"); ++ retval = pci_register_driver(&dwc_otg_driver); ++ drv = &dwc_otg_driver.driver; ++#elif defined(PLATFORM_INTERFACE) ++ "platform"); ++ retval = platform_driver_register(&dwc_otg_driver); ++ drv = &dwc_otg_driver.driver; ++#endif ++ if (retval < 0) { ++ printk(KERN_ERR "%s retval=%d\n", __func__, retval); ++ return retval; ++ } ++ ++ error = driver_create_file(drv, &driver_attr_version); ++#ifdef DEBUG ++ error = driver_create_file(drv, &driver_attr_debuglevel); ++#endif ++ return retval; ++} ++ ++module_init(dwc_otg_driver_init); ++ ++/** ++ * This function is called when the driver is removed from the kernel ++ * with the rmmod command. The driver unregisters itself with its bus ++ * driver. ++ * ++ */ ++static void __exit dwc_otg_driver_cleanup(void) ++{ ++ printk(KERN_DEBUG "dwc_otg_driver_cleanup()\n"); ++ ++#ifdef LM_INTERFACE ++ driver_remove_file(&dwc_otg_driver.drv, &driver_attr_debuglevel); ++ driver_remove_file(&dwc_otg_driver.drv, &driver_attr_version); ++ lm_driver_unregister(&dwc_otg_driver); ++#elif defined(PCI_INTERFACE) ++ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel); ++ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version); ++ pci_unregister_driver(&dwc_otg_driver); ++#elif defined(PLATFORM_INTERFACE) ++ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel); ++ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version); ++ platform_driver_unregister(&dwc_otg_driver); ++#endif ++ ++ printk(KERN_INFO "%s module removed\n", dwc_driver_name); ++} ++ ++module_exit(dwc_otg_driver_cleanup); ++ ++MODULE_DESCRIPTION(DWC_DRIVER_DESC); ++MODULE_AUTHOR("Synopsys Inc."); ++MODULE_LICENSE("GPL"); ++ ++module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444); ++MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None"); ++module_param_named(opt, dwc_otg_module_params.opt, int, 0444); ++MODULE_PARM_DESC(opt, "OPT Mode"); ++module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444); ++MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled"); ++ ++module_param_named(dma_desc_enable, dwc_otg_module_params.dma_desc_enable, int, ++ 0444); ++MODULE_PARM_DESC(dma_desc_enable, ++ "DMA Desc Mode 0=Address DMA 1=DMA Descriptor enabled"); ++ ++module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int, ++ 0444); ++MODULE_PARM_DESC(dma_burst_size, ++ "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256"); ++module_param_named(speed, dwc_otg_module_params.speed, int, 0444); ++MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed"); ++module_param_named(host_support_fs_ls_low_power, ++ dwc_otg_module_params.host_support_fs_ls_low_power, int, ++ 0444); ++MODULE_PARM_DESC(host_support_fs_ls_low_power, ++ "Support Low Power w/FS or LS 0=Support 1=Don't Support"); ++module_param_named(host_ls_low_power_phy_clk, ++ dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444); ++MODULE_PARM_DESC(host_ls_low_power_phy_clk, ++ "Low Speed Low Power Clock 0=48Mhz 1=6Mhz"); ++module_param_named(enable_dynamic_fifo, ++ dwc_otg_module_params.enable_dynamic_fifo, int, 0444); ++MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing"); ++module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int, ++ 0444); ++MODULE_PARM_DESC(data_fifo_size, ++ "Total number of words in the data FIFO memory 32-32768"); ++module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size, ++ int, 0444); ++MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768"); ++module_param_named(dev_nperio_tx_fifo_size, ++ dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444); ++MODULE_PARM_DESC(dev_nperio_tx_fifo_size, ++ "Number of words in the non-periodic Tx FIFO 16-32768"); ++module_param_named(dev_perio_tx_fifo_size_1, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_1, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_2, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_2, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_3, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_3, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_4, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_4, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_5, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_5, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_6, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_6, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_7, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_7, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_8, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_8, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_9, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_9, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_10, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_10, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_11, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_11, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_12, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_12, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_13, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_13, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_14, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_14, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_15, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_15, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size, ++ int, 0444); ++MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768"); ++module_param_named(host_nperio_tx_fifo_size, ++ dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444); ++MODULE_PARM_DESC(host_nperio_tx_fifo_size, ++ "Number of words in the non-periodic Tx FIFO 16-32768"); ++module_param_named(host_perio_tx_fifo_size, ++ dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444); ++MODULE_PARM_DESC(host_perio_tx_fifo_size, ++ "Number of words in the host periodic Tx FIFO 16-32768"); ++module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size, ++ int, 0444); ++/** @todo Set the max to 512K, modify checks */ ++MODULE_PARM_DESC(max_transfer_size, ++ "The maximum transfer size supported in bytes 2047-65535"); ++module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count, ++ int, 0444); ++MODULE_PARM_DESC(max_packet_count, ++ "The maximum number of packets in a transfer 15-511"); ++module_param_named(host_channels, dwc_otg_module_params.host_channels, int, ++ 0444); ++MODULE_PARM_DESC(host_channels, ++ "The number of host channel registers to use 1-16"); ++module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int, ++ 0444); ++MODULE_PARM_DESC(dev_endpoints, ++ "The number of endpoints in addition to EP0 available for device mode 1-15"); ++module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444); ++MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI"); ++module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int, ++ 0444); ++MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits"); ++module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444); ++MODULE_PARM_DESC(phy_ulpi_ddr, ++ "ULPI at double or single data rate 0=Single 1=Double"); ++module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus, ++ int, 0444); ++MODULE_PARM_DESC(phy_ulpi_ext_vbus, ++ "ULPI PHY using internal or external vbus 0=Internal"); ++module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444); ++MODULE_PARM_DESC(i2c_enable, "FS PHY Interface"); ++module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444); ++MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only"); ++module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444); ++MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs"); ++module_param_named(debug, g_dbg_lvl, int, 0444); ++MODULE_PARM_DESC(debug, ""); ++ ++module_param_named(en_multiple_tx_fifo, ++ dwc_otg_module_params.en_multiple_tx_fifo, int, 0444); ++MODULE_PARM_DESC(en_multiple_tx_fifo, ++ "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled"); ++module_param_named(dev_tx_fifo_size_1, ++ dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_2, ++ dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_3, ++ dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_4, ++ dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_5, ++ dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_6, ++ dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_7, ++ dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_8, ++ dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_9, ++ dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_10, ++ dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_11, ++ dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_12, ++ dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_13, ++ dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_14, ++ dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_15, ++ dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768"); ++ ++module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444); ++MODULE_PARM_DESC(thr_ctl, ++ "Thresholding enable flag bit 0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled"); ++module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int, ++ 0444); ++MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs"); ++module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int, ++ 0444); ++MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs"); ++ ++module_param_named(pti_enable, dwc_otg_module_params.pti_enable, int, 0444); ++module_param_named(mpi_enable, dwc_otg_module_params.mpi_enable, int, 0444); ++module_param_named(lpm_enable, dwc_otg_module_params.lpm_enable, int, 0444); ++MODULE_PARM_DESC(lpm_enable, "LPM Enable 0=LPM Disabled 1=LPM Enabled"); ++module_param_named(ic_usb_cap, dwc_otg_module_params.ic_usb_cap, int, 0444); ++MODULE_PARM_DESC(ic_usb_cap, ++ "IC_USB Capability 0=IC_USB Disabled 1=IC_USB Enabled"); ++module_param_named(ahb_thr_ratio, dwc_otg_module_params.ahb_thr_ratio, int, ++ 0444); ++MODULE_PARM_DESC(ahb_thr_ratio, "AHB Threshold Ratio"); ++module_param_named(power_down, dwc_otg_module_params.power_down, int, 0444); ++MODULE_PARM_DESC(power_down, "Power Down Mode"); ++module_param_named(reload_ctl, dwc_otg_module_params.reload_ctl, int, 0444); ++MODULE_PARM_DESC(reload_ctl, "HFIR Reload Control"); ++module_param_named(dev_out_nak, dwc_otg_module_params.dev_out_nak, int, 0444); ++MODULE_PARM_DESC(dev_out_nak, "Enable Device OUT NAK"); ++module_param_named(cont_on_bna, dwc_otg_module_params.cont_on_bna, int, 0444); ++MODULE_PARM_DESC(cont_on_bna, "Enable Enable Continue on BNA"); ++module_param_named(ahb_single, dwc_otg_module_params.ahb_single, int, 0444); ++MODULE_PARM_DESC(ahb_single, "Enable AHB Single Support"); ++module_param_named(adp_enable, dwc_otg_module_params.adp_enable, int, 0444); ++MODULE_PARM_DESC(adp_enable, "ADP Enable 0=ADP Disabled 1=ADP Enabled"); ++module_param_named(otg_ver, dwc_otg_module_params.otg_ver, int, 0444); ++MODULE_PARM_DESC(otg_ver, "OTG revision supported 0=OTG 1.3 1=OTG 2.0"); ++module_param(microframe_schedule, bool, 0444); ++MODULE_PARM_DESC(microframe_schedule, "Enable the microframe scheduler"); ++ ++/** @page "Module Parameters" ++ * ++ * The following parameters may be specified when starting the module. ++ * These parameters define how the DWC_otg controller should be ++ * configured. Parameter values are passed to the CIL initialization ++ * function dwc_otg_cil_init ++ * ++ * Example: <code>modprobe dwc_otg speed=1 otg_cap=1</code> ++ * ++ ++ <table> ++ <tr><td>Parameter Name</td><td>Meaning</td></tr> ++ ++ <tr> ++ <td>otg_cap</td> ++ <td>Specifies the OTG capabilities. The driver will automatically detect the ++ value for this parameter if none is specified. ++ - 0: HNP and SRP capable (default, if available) ++ - 1: SRP Only capable ++ - 2: No HNP/SRP capable ++ </td></tr> ++ ++ <tr> ++ <td>dma_enable</td> ++ <td>Specifies whether to use slave or DMA mode for accessing the data FIFOs. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: Slave ++ - 1: DMA (default, if available) ++ </td></tr> ++ ++ <tr> ++ <td>dma_burst_size</td> ++ <td>The DMA Burst size (applicable only for External DMA Mode). ++ - Values: 1, 4, 8 16, 32, 64, 128, 256 (default 32) ++ </td></tr> ++ ++ <tr> ++ <td>speed</td> ++ <td>Specifies the maximum speed of operation in host and device mode. The ++ actual speed depends on the speed of the attached device and the value of ++ phy_type. ++ - 0: High Speed (default) ++ - 1: Full Speed ++ </td></tr> ++ ++ <tr> ++ <td>host_support_fs_ls_low_power</td> ++ <td>Specifies whether low power mode is supported when attached to a Full ++ Speed or Low Speed device in host mode. ++ - 0: Don't support low power mode (default) ++ - 1: Support low power mode ++ </td></tr> ++ ++ <tr> ++ <td>host_ls_low_power_phy_clk</td> ++ <td>Specifies the PHY clock rate in low power mode when connected to a Low ++ Speed device in host mode. This parameter is applicable only if ++ HOST_SUPPORT_FS_LS_LOW_POWER is enabled. ++ - 0: 48 MHz (default) ++ - 1: 6 MHz ++ </td></tr> ++ ++ <tr> ++ <td>enable_dynamic_fifo</td> ++ <td> Specifies whether FIFOs may be resized by the driver software. ++ - 0: Use cC FIFO size parameters ++ - 1: Allow dynamic FIFO sizing (default) ++ </td></tr> ++ ++ <tr> ++ <td>data_fifo_size</td> ++ <td>Total number of 4-byte words in the data FIFO memory. This memory ++ includes the Rx FIFO, non-periodic Tx FIFO, and periodic Tx FIFOs. ++ - Values: 32 to 32768 (default 8192) ++ ++ Note: The total FIFO memory depth in the FPGA configuration is 8192. ++ </td></tr> ++ ++ <tr> ++ <td>dev_rx_fifo_size</td> ++ <td>Number of 4-byte words in the Rx FIFO in device mode when dynamic ++ FIFO sizing is enabled. ++ - Values: 16 to 32768 (default 1064) ++ </td></tr> ++ ++ <tr> ++ <td>dev_nperio_tx_fifo_size</td> ++ <td>Number of 4-byte words in the non-periodic Tx FIFO in device mode when ++ dynamic FIFO sizing is enabled. ++ - Values: 16 to 32768 (default 1024) ++ </td></tr> ++ ++ <tr> ++ <td>dev_perio_tx_fifo_size_n (n = 1 to 15)</td> ++ <td>Number of 4-byte words in each of the periodic Tx FIFOs in device mode ++ when dynamic FIFO sizing is enabled. ++ - Values: 4 to 768 (default 256) ++ </td></tr> ++ ++ <tr> ++ <td>host_rx_fifo_size</td> ++ <td>Number of 4-byte words in the Rx FIFO in host mode when dynamic FIFO ++ sizing is enabled. ++ - Values: 16 to 32768 (default 1024) ++ </td></tr> ++ ++ <tr> ++ <td>host_nperio_tx_fifo_size</td> ++ <td>Number of 4-byte words in the non-periodic Tx FIFO in host mode when ++ dynamic FIFO sizing is enabled in the core. ++ - Values: 16 to 32768 (default 1024) ++ </td></tr> ++ ++ <tr> ++ <td>host_perio_tx_fifo_size</td> ++ <td>Number of 4-byte words in the host periodic Tx FIFO when dynamic FIFO ++ sizing is enabled. ++ - Values: 16 to 32768 (default 1024) ++ </td></tr> ++ ++ <tr> ++ <td>max_transfer_size</td> ++ <td>The maximum transfer size supported in bytes. ++ - Values: 2047 to 65,535 (default 65,535) ++ </td></tr> ++ ++ <tr> ++ <td>max_packet_count</td> ++ <td>The maximum number of packets in a transfer. ++ - Values: 15 to 511 (default 511) ++ </td></tr> ++ ++ <tr> ++ <td>host_channels</td> ++ <td>The number of host channel registers to use. ++ - Values: 1 to 16 (default 12) ++ ++ Note: The FPGA configuration supports a maximum of 12 host channels. ++ </td></tr> ++ ++ <tr> ++ <td>dev_endpoints</td> ++ <td>The number of endpoints in addition to EP0 available for device mode ++ operations. ++ - Values: 1 to 15 (default 6 IN and OUT) ++ ++ Note: The FPGA configuration supports a maximum of 6 IN and OUT endpoints in ++ addition to EP0. ++ </td></tr> ++ ++ <tr> ++ <td>phy_type</td> ++ <td>Specifies the type of PHY interface to use. By default, the driver will ++ automatically detect the phy_type. ++ - 0: Full Speed ++ - 1: UTMI+ (default, if available) ++ - 2: ULPI ++ </td></tr> ++ ++ <tr> ++ <td>phy_utmi_width</td> ++ <td>Specifies the UTMI+ Data Width. This parameter is applicable for a ++ phy_type of UTMI+. Also, this parameter is applicable only if the ++ OTG_HSPHY_WIDTH cC parameter was set to "8 and 16 bits", meaning that the ++ core has been configured to work at either data path width. ++ - Values: 8 or 16 bits (default 16) ++ </td></tr> ++ ++ <tr> ++ <td>phy_ulpi_ddr</td> ++ <td>Specifies whether the ULPI operates at double or single data rate. This ++ parameter is only applicable if phy_type is ULPI. ++ - 0: single data rate ULPI interface with 8 bit wide data bus (default) ++ - 1: double data rate ULPI interface with 4 bit wide data bus ++ </td></tr> ++ ++ <tr> ++ <td>i2c_enable</td> ++ <td>Specifies whether to use the I2C interface for full speed PHY. This ++ parameter is only applicable if PHY_TYPE is FS. ++ - 0: Disabled (default) ++ - 1: Enabled ++ </td></tr> ++ ++ <tr> ++ <td>ulpi_fs_ls</td> ++ <td>Specifies whether to use ULPI FS/LS mode only. ++ - 0: Disabled (default) ++ - 1: Enabled ++ </td></tr> ++ ++ <tr> ++ <td>ts_dline</td> ++ <td>Specifies whether term select D-Line pulsing for all PHYs is enabled. ++ - 0: Disabled (default) ++ - 1: Enabled ++ </td></tr> ++ ++ <tr> ++ <td>en_multiple_tx_fifo</td> ++ <td>Specifies whether dedicatedto tx fifos are enabled for non periodic IN EPs. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: Disabled ++ - 1: Enabled (default, if available) ++ </td></tr> ++ ++ <tr> ++ <td>dev_tx_fifo_size_n (n = 1 to 15)</td> ++ <td>Number of 4-byte words in each of the Tx FIFOs in device mode ++ when dynamic FIFO sizing is enabled. ++ - Values: 4 to 768 (default 256) ++ </td></tr> ++ ++ <tr> ++ <td>tx_thr_length</td> ++ <td>Transmit Threshold length in 32 bit double words ++ - Values: 8 to 128 (default 64) ++ </td></tr> ++ ++ <tr> ++ <td>rx_thr_length</td> ++ <td>Receive Threshold length in 32 bit double words ++ - Values: 8 to 128 (default 64) ++ </td></tr> ++ ++<tr> ++ <td>thr_ctl</td> ++ <td>Specifies whether to enable Thresholding for Device mode. Bits 0, 1, 2 of ++ this parmater specifies if thresholding is enabled for non-Iso Tx, Iso Tx and ++ Rx transfers accordingly. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - Values: 0 to 7 (default 0) ++ Bit values indicate: ++ - 0: Thresholding disabled ++ - 1: Thresholding enabled ++ </td></tr> ++ ++<tr> ++ <td>dma_desc_enable</td> ++ <td>Specifies whether to enable Descriptor DMA mode. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: Descriptor DMA disabled ++ - 1: Descriptor DMA (default, if available) ++ </td></tr> ++ ++<tr> ++ <td>mpi_enable</td> ++ <td>Specifies whether to enable MPI enhancement mode. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: MPI disabled (default) ++ - 1: MPI enable ++ </td></tr> ++ ++<tr> ++ <td>pti_enable</td> ++ <td>Specifies whether to enable PTI enhancement support. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: PTI disabled (default) ++ - 1: PTI enable ++ </td></tr> ++ ++<tr> ++ <td>lpm_enable</td> ++ <td>Specifies whether to enable LPM support. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: LPM disabled ++ - 1: LPM enable (default, if available) ++ </td></tr> ++ ++<tr> ++ <td>ic_usb_cap</td> ++ <td>Specifies whether to enable IC_USB capability. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: IC_USB disabled (default, if available) ++ - 1: IC_USB enable ++ </td></tr> ++ ++<tr> ++ <td>ahb_thr_ratio</td> ++ <td>Specifies AHB Threshold ratio. ++ - Values: 0 to 3 (default 0) ++ </td></tr> ++ ++<tr> ++ <td>power_down</td> ++ <td>Specifies Power Down(Hibernation) Mode. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: Power Down disabled (default) ++ - 2: Power Down enabled ++ </td></tr> ++ ++ <tr> ++ <td>reload_ctl</td> ++ <td>Specifies whether dynamic reloading of the HFIR register is allowed during ++ run time. The driver will automatically detect the value for this parameter if ++ none is specified. In case the HFIR value is reloaded when HFIR.RldCtrl == 1'b0 ++ the core might misbehave. ++ - 0: Reload Control disabled (default) ++ - 1: Reload Control enabled ++ </td></tr> ++ ++ <tr> ++ <td>dev_out_nak</td> ++ <td>Specifies whether Device OUT NAK enhancement enabled or no. ++ The driver will automatically detect the value for this parameter if ++ none is specified. This parameter is valid only when OTG_EN_DESC_DMA == 1b1. ++ - 0: The core does not set NAK after Bulk OUT transfer complete (default) ++ - 1: The core sets NAK after Bulk OUT transfer complete ++ </td></tr> ++ ++ <tr> ++ <td>cont_on_bna</td> ++ <td>Specifies whether Enable Continue on BNA enabled or no. ++ After receiving BNA interrupt the core disables the endpoint,when the ++ endpoint is re-enabled by the application the ++ - 0: Core starts processing from the DOEPDMA descriptor (default) ++ - 1: Core starts processing from the descriptor which received the BNA. ++ This parameter is valid only when OTG_EN_DESC_DMA == 1b1. ++ </td></tr> ++ ++ <tr> ++ <td>ahb_single</td> ++ <td>This bit when programmed supports SINGLE transfers for remainder data ++ in a transfer for DMA mode of operation. ++ - 0: The remainder data will be sent using INCR burst size (default) ++ - 1: The remainder data will be sent using SINGLE burst size. ++ </td></tr> ++ ++<tr> ++ <td>adp_enable</td> ++ <td>Specifies whether ADP feature is enabled. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: ADP feature disabled (default) ++ - 1: ADP feature enabled ++ </td></tr> ++ ++ <tr> ++ <td>otg_ver</td> ++ <td>Specifies whether OTG is performing as USB OTG Revision 2.0 or Revision 1.3 ++ USB OTG device. ++ - 0: OTG 2.0 support disabled (default) ++ - 1: OTG 2.0 support enabled ++ </td></tr> ++ ++*/ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.h +@@ -0,0 +1,86 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.h $ ++ * $Revision: #19 $ ++ * $Date: 2010/11/15 $ ++ * $Change: 1627671 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#ifndef __DWC_OTG_DRIVER_H__ ++#define __DWC_OTG_DRIVER_H__ ++ ++/** @file ++ * This file contains the interface to the Linux driver. ++ */ ++#include "dwc_otg_os_dep.h" ++#include "dwc_otg_core_if.h" ++ ++/* Type declarations */ ++struct dwc_otg_pcd; ++struct dwc_otg_hcd; ++ ++/** ++ * This structure is a wrapper that encapsulates the driver components used to ++ * manage a single DWC_otg controller. ++ */ ++typedef struct dwc_otg_device { ++ /** Structure containing OS-dependent stuff. KEEP THIS STRUCT AT THE ++ * VERY BEGINNING OF THE DEVICE STRUCT. OSes such as FreeBSD and NetBSD ++ * require this. */ ++ struct os_dependent os_dep; ++ ++ /** Pointer to the core interface structure. */ ++ dwc_otg_core_if_t *core_if; ++ ++ /** Pointer to the PCD structure. */ ++ struct dwc_otg_pcd *pcd; ++ ++ /** Pointer to the HCD structure. */ ++ struct dwc_otg_hcd *hcd; ++ ++ /** Flag to indicate whether the common IRQ handler is installed. */ ++ uint8_t common_irq_installed; ++ ++} dwc_otg_device_t; ++ ++/*We must clear S3C24XX_EINTPEND external interrupt register ++ * because after clearing in this register trigerred IRQ from ++ * H/W core in kernel interrupt can be occured again before OTG ++ * handlers clear all IRQ sources of Core registers because of ++ * timing latencies and Low Level IRQ Type. ++ */ ++#ifdef CONFIG_MACH_IPMATE ++#define S3C2410X_CLEAR_EINTPEND() \ ++do { \ ++ __raw_writel(1UL << 11,S3C24XX_EINTPEND); \ ++} while (0) ++#else ++#define S3C2410X_CLEAR_EINTPEND() do { } while (0) ++#endif ++ ++#endif +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c +@@ -0,0 +1,3473 @@ ++ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.c $ ++ * $Revision: #104 $ ++ * $Date: 2011/10/24 $ ++ * $Change: 1871159 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++ ++/** @file ++ * This file implements HCD Core. All code in this file is portable and doesn't ++ * use any OS specific functions. ++ * Interface provided by HCD Core is defined in <code><hcd_if.h></code> ++ * header file. ++ */ ++ ++#include "dwc_otg_hcd.h" ++#include "dwc_otg_regs.h" ++ ++extern bool microframe_schedule; ++ ++//#define DEBUG_HOST_CHANNELS ++#ifdef DEBUG_HOST_CHANNELS ++static int last_sel_trans_num_per_scheduled = 0; ++static int last_sel_trans_num_nonper_scheduled = 0; ++static int last_sel_trans_num_avail_hc_at_start = 0; ++static int last_sel_trans_num_avail_hc_at_end = 0; ++#endif /* DEBUG_HOST_CHANNELS */ ++ ++dwc_otg_hcd_t *dwc_otg_hcd_alloc_hcd(void) ++{ ++ return DWC_ALLOC(sizeof(dwc_otg_hcd_t)); ++} ++ ++/** ++ * Connection timeout function. An OTG host is required to display a ++ * message if the device does not connect within 10 seconds. ++ */ ++void dwc_otg_hcd_connect_timeout(void *ptr) ++{ ++ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, ptr); ++ DWC_PRINTF("Connect Timeout\n"); ++ __DWC_ERROR("Device Not Connected/Responding\n"); ++} ++ ++#if defined(DEBUG) ++static void dump_channel_info(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ if (qh->channel != NULL) { ++ dwc_hc_t *hc = qh->channel; ++ dwc_list_link_t *item; ++ dwc_otg_qh_t *qh_item; ++ int num_channels = hcd->core_if->core_params->host_channels; ++ int i; ++ ++ dwc_otg_hc_regs_t *hc_regs; ++ hcchar_data_t hcchar; ++ hcsplt_data_t hcsplt; ++ hctsiz_data_t hctsiz; ++ uint32_t hcdma; ++ ++ hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num]; ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt); ++ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); ++ hcdma = DWC_READ_REG32(&hc_regs->hcdma); ++ ++ DWC_PRINTF(" Assigned to channel %p:\n", hc); ++ DWC_PRINTF(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, ++ hcsplt.d32); ++ DWC_PRINTF(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, ++ hcdma); ++ DWC_PRINTF(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", ++ hc->dev_addr, hc->ep_num, hc->ep_is_in); ++ DWC_PRINTF(" ep_type: %d\n", hc->ep_type); ++ DWC_PRINTF(" max_packet: %d\n", hc->max_packet); ++ DWC_PRINTF(" data_pid_start: %d\n", hc->data_pid_start); ++ DWC_PRINTF(" xfer_started: %d\n", hc->xfer_started); ++ DWC_PRINTF(" halt_status: %d\n", hc->halt_status); ++ DWC_PRINTF(" xfer_buff: %p\n", hc->xfer_buff); ++ DWC_PRINTF(" xfer_len: %d\n", hc->xfer_len); ++ DWC_PRINTF(" qh: %p\n", hc->qh); ++ DWC_PRINTF(" NP inactive sched:\n"); ++ DWC_LIST_FOREACH(item, &hcd->non_periodic_sched_inactive) { ++ qh_item = ++ DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry); ++ DWC_PRINTF(" %p\n", qh_item); ++ } ++ DWC_PRINTF(" NP active sched:\n"); ++ DWC_LIST_FOREACH(item, &hcd->non_periodic_sched_active) { ++ qh_item = ++ DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry); ++ DWC_PRINTF(" %p\n", qh_item); ++ } ++ DWC_PRINTF(" Channels: \n"); ++ for (i = 0; i < num_channels; i++) { ++ dwc_hc_t *hc = hcd->hc_ptr_array[i]; ++ DWC_PRINTF(" %2d: %p\n", i, hc); ++ } ++ } ++} ++#else ++#define dump_channel_info(hcd, qh) ++#endif /* DEBUG */ ++ ++/** ++ * Work queue function for starting the HCD when A-Cable is connected. ++ * The hcd_start() must be called in a process context. ++ */ ++static void hcd_start_func(void *_vp) ++{ ++ dwc_otg_hcd_t *hcd = (dwc_otg_hcd_t *) _vp; ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, hcd); ++ if (hcd) { ++ hcd->fops->start(hcd); ++ } ++} ++ ++static void del_xfer_timers(dwc_otg_hcd_t * hcd) ++{ ++#ifdef DEBUG ++ int i; ++ int num_channels = hcd->core_if->core_params->host_channels; ++ for (i = 0; i < num_channels; i++) { ++ DWC_TIMER_CANCEL(hcd->core_if->hc_xfer_timer[i]); ++ } ++#endif ++} ++ ++static void del_timers(dwc_otg_hcd_t * hcd) ++{ ++ del_xfer_timers(hcd); ++ DWC_TIMER_CANCEL(hcd->conn_timer); ++} ++ ++/** ++ * Processes all the URBs in a single list of QHs. Completes them with ++ * -ETIMEDOUT and frees the QTD. ++ */ ++static void kill_urbs_in_qh_list(dwc_otg_hcd_t * hcd, dwc_list_link_t * qh_list) ++{ ++ dwc_list_link_t *qh_item; ++ dwc_otg_qh_t *qh; ++ dwc_otg_qtd_t *qtd, *qtd_tmp; ++ ++ DWC_LIST_FOREACH(qh_item, qh_list) { ++ qh = DWC_LIST_ENTRY(qh_item, dwc_otg_qh_t, qh_list_entry); ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, ++ &qh->qtd_list, qtd_list_entry) { ++ qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); ++ if (qtd->urb != NULL) { ++ hcd->fops->complete(hcd, qtd->urb->priv, ++ qtd->urb, -DWC_E_TIMEOUT); ++ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); ++ } ++ ++ } ++ } ++} ++ ++/** ++ * Responds with an error status of ETIMEDOUT to all URBs in the non-periodic ++ * and periodic schedules. The QTD associated with each URB is removed from ++ * the schedule and freed. This function may be called when a disconnect is ++ * detected or when the HCD is being stopped. ++ */ ++static void kill_all_urbs(dwc_otg_hcd_t * hcd) ++{ ++ kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_inactive); ++ kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_active); ++ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_inactive); ++ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_ready); ++ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_assigned); ++ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_queued); ++} ++ ++/** ++ * Start the connection timer. An OTG host is required to display a ++ * message if the device does not connect within 10 seconds. The ++ * timer is deleted if a port connect interrupt occurs before the ++ * timer expires. ++ */ ++static void dwc_otg_hcd_start_connect_timer(dwc_otg_hcd_t * hcd) ++{ ++ DWC_TIMER_SCHEDULE(hcd->conn_timer, 10000 /* 10 secs */ ); ++} ++ ++/** ++ * HCD Callback function for disconnect of the HCD. ++ * ++ * @param p void pointer to the <code>struct usb_hcd</code> ++ */ ++static int32_t dwc_otg_hcd_session_start_cb(void *p) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd; ++ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p); ++ dwc_otg_hcd = p; ++ dwc_otg_hcd_start_connect_timer(dwc_otg_hcd); ++ return 1; ++} ++ ++/** ++ * HCD Callback function for starting the HCD when A-Cable is ++ * connected. ++ * ++ * @param p void pointer to the <code>struct usb_hcd</code> ++ */ ++static int32_t dwc_otg_hcd_start_cb(void *p) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = p; ++ dwc_otg_core_if_t *core_if; ++ hprt0_data_t hprt0; ++ ++ core_if = dwc_otg_hcd->core_if; ++ ++ if (core_if->op_state == B_HOST) { ++ /* ++ * Reset the port. During a HNP mode switch the reset ++ * needs to occur within 1ms and have a duration of at ++ * least 50ms. ++ */ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtrst = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ } ++ DWC_WORKQ_SCHEDULE_DELAYED(core_if->wq_otg, ++ hcd_start_func, dwc_otg_hcd, 50, ++ "start hcd"); ++ ++ return 1; ++} ++ ++/** ++ * HCD Callback function for disconnect of the HCD. ++ * ++ * @param p void pointer to the <code>struct usb_hcd</code> ++ */ ++static int32_t dwc_otg_hcd_disconnect_cb(void *p) ++{ ++ gintsts_data_t intr; ++ dwc_otg_hcd_t *dwc_otg_hcd = p; ++ ++ /* ++ * Set status flags for the hub driver. ++ */ ++ dwc_otg_hcd->flags.b.port_connect_status_change = 1; ++ dwc_otg_hcd->flags.b.port_connect_status = 0; ++ ++ /* ++ * Shutdown any transfers in process by clearing the Tx FIFO Empty ++ * interrupt mask and status bits and disabling subsequent host ++ * channel interrupts. ++ */ ++ intr.d32 = 0; ++ intr.b.nptxfempty = 1; ++ intr.b.ptxfempty = 1; ++ intr.b.hcintr = 1; ++ DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, ++ intr.d32, 0); ++ DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintsts, ++ intr.d32, 0); ++ ++ del_timers(dwc_otg_hcd); ++ ++ /* ++ * Turn off the vbus power only if the core has transitioned to device ++ * mode. If still in host mode, need to keep power on to detect a ++ * reconnection. ++ */ ++ if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) { ++ if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) { ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ DWC_PRINTF("Disconnect: PortPower off\n"); ++ hprt0.b.prtpwr = 0; ++ DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0, ++ hprt0.d32); ++ } ++ ++ dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if); ++ } ++ ++ /* Respond with an error status to all URBs in the schedule. */ ++ kill_all_urbs(dwc_otg_hcd); ++ ++ if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) { ++ /* Clean up any host channels that were in use. */ ++ int num_channels; ++ int i; ++ dwc_hc_t *channel; ++ dwc_otg_hc_regs_t *hc_regs; ++ hcchar_data_t hcchar; ++ ++ num_channels = dwc_otg_hcd->core_if->core_params->host_channels; ++ ++ if (!dwc_otg_hcd->core_if->dma_enable) { ++ /* Flush out any channel requests in slave mode. */ ++ for (i = 0; i < num_channels; i++) { ++ channel = dwc_otg_hcd->hc_ptr_array[i]; ++ if (DWC_CIRCLEQ_EMPTY_ENTRY ++ (channel, hc_list_entry)) { ++ hc_regs = ++ dwc_otg_hcd->core_if-> ++ host_if->hc_regs[i]; ++ hcchar.d32 = ++ DWC_READ_REG32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ hcchar.b.chen = 0; ++ hcchar.b.chdis = 1; ++ hcchar.b.epdir = 0; ++ DWC_WRITE_REG32 ++ (&hc_regs->hcchar, ++ hcchar.d32); ++ } ++ } ++ } ++ } ++ ++ for (i = 0; i < num_channels; i++) { ++ channel = dwc_otg_hcd->hc_ptr_array[i]; ++ if (DWC_CIRCLEQ_EMPTY_ENTRY(channel, hc_list_entry)) { ++ hc_regs = ++ dwc_otg_hcd->core_if->host_if->hc_regs[i]; ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ /* Halt the channel. */ ++ hcchar.b.chdis = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, ++ hcchar.d32); ++ } ++ ++ dwc_otg_hc_cleanup(dwc_otg_hcd->core_if, ++ channel); ++ DWC_CIRCLEQ_INSERT_TAIL ++ (&dwc_otg_hcd->free_hc_list, channel, ++ hc_list_entry); ++ /* ++ * Added for Descriptor DMA to prevent channel double cleanup ++ * in release_channel_ddma(). Which called from ep_disable ++ * when device disconnect. ++ */ ++ channel->qh = NULL; ++ } ++ } ++ } ++ ++ if (dwc_otg_hcd->fops->disconnect) { ++ dwc_otg_hcd->fops->disconnect(dwc_otg_hcd); ++ } ++ ++ return 1; ++} ++ ++/** ++ * HCD Callback function for stopping the HCD. ++ * ++ * @param p void pointer to the <code>struct usb_hcd</code> ++ */ ++static int32_t dwc_otg_hcd_stop_cb(void *p) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = p; ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p); ++ dwc_otg_hcd_stop(dwc_otg_hcd); ++ return 1; ++} ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++/** ++ * HCD Callback function for sleep of HCD. ++ * ++ * @param p void pointer to the <code>struct usb_hcd</code> ++ */ ++static int dwc_otg_hcd_sleep_cb(void *p) ++{ ++ dwc_otg_hcd_t *hcd = p; ++ ++ dwc_otg_hcd_free_hc_from_lpm(hcd); ++ ++ return 0; ++} ++#endif ++ ++/** ++ * HCD Callback function for Remote Wakeup. ++ * ++ * @param p void pointer to the <code>struct usb_hcd</code> ++ */ ++static int dwc_otg_hcd_rem_wakeup_cb(void *p) ++{ ++ dwc_otg_hcd_t *hcd = p; ++ ++ if (hcd->core_if->lx_state == DWC_OTG_L2) { ++ hcd->flags.b.port_suspend_change = 1; ++ } ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ else { ++ hcd->flags.b.port_l1_change = 1; ++ } ++#endif ++ return 0; ++} ++ ++/** ++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are ++ * stopped. ++ */ ++void dwc_otg_hcd_stop(dwc_otg_hcd_t * hcd) ++{ ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n"); ++ ++ /* ++ * The root hub should be disconnected before this function is called. ++ * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue) ++ * and the QH lists (via ..._hcd_endpoint_disable). ++ */ ++ ++ /* Turn off all host-specific interrupts. */ ++ dwc_otg_disable_host_interrupts(hcd->core_if); ++ ++ /* Turn off the vbus power */ ++ DWC_PRINTF("PortPower off\n"); ++ hprt0.b.prtpwr = 0; ++ DWC_WRITE_REG32(hcd->core_if->host_if->hprt0, hprt0.d32); ++ dwc_mdelay(1); ++} ++ ++int dwc_otg_hcd_urb_enqueue(dwc_otg_hcd_t * hcd, ++ dwc_otg_hcd_urb_t * dwc_otg_urb, void **ep_handle, ++ int atomic_alloc) ++{ ++ dwc_irqflags_t flags; ++ int retval = 0; ++ dwc_otg_qtd_t *qtd; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++#ifdef DEBUG /* integrity checks (Broadcom) */ ++ if (NULL == hcd->core_if) { ++ DWC_ERROR("**** DWC OTG HCD URB Enqueue - HCD has NULL core_if\n"); ++ /* No longer connected. */ ++ return -DWC_E_INVALID; ++ } ++#endif ++ if (!hcd->flags.b.port_connect_status) { ++ /* No longer connected. */ ++ DWC_ERROR("Not connected\n"); ++ return -DWC_E_NO_DEVICE; ++ } ++ ++ qtd = dwc_otg_hcd_qtd_create(dwc_otg_urb, atomic_alloc); ++ if (qtd == NULL) { ++ DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n"); ++ return -DWC_E_NO_MEMORY; ++ } ++#ifdef DEBUG /* integrity checks (Broadcom) */ ++ if (qtd->urb == NULL) { ++ DWC_ERROR("**** DWC OTG HCD URB Enqueue created QTD with no URBs\n"); ++ return -DWC_E_NO_MEMORY; ++ } ++ if (qtd->urb->priv == NULL) { ++ DWC_ERROR("**** DWC OTG HCD URB Enqueue created QTD URB with no URB handle\n"); ++ return -DWC_E_NO_MEMORY; ++ } ++#endif ++ retval = ++ dwc_otg_hcd_qtd_add(qtd, hcd, (dwc_otg_qh_t **) ep_handle, atomic_alloc); ++ // creates a new queue in ep_handle if it doesn't exist already ++ if (retval < 0) { ++ DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. " ++ "Error status %d\n", retval); ++ dwc_otg_hcd_qtd_free(qtd); ++ } else { ++ qtd->qh = *ep_handle; ++ } ++ intr_mask.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->gintmsk); ++ if (!intr_mask.b.sofintr && retval == 0) { ++ dwc_otg_transaction_type_e tr_type; ++ if ((qtd->qh->ep_type == UE_BULK) ++ && !(qtd->urb->flags & URB_GIVEBACK_ASAP)) { ++ /* Do not schedule SG transactions until qtd has URB_GIVEBACK_ASAP set */ ++ return 0; ++ } ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ tr_type = dwc_otg_hcd_select_transactions(hcd); ++ if (tr_type != DWC_OTG_TRANSACTION_NONE) { ++ dwc_otg_hcd_queue_transactions(hcd, tr_type); ++ } ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ } ++ ++ return retval; ++} ++ ++int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_t * hcd, ++ dwc_otg_hcd_urb_t * dwc_otg_urb) ++{ ++ dwc_otg_qh_t *qh; ++ dwc_otg_qtd_t *urb_qtd; ++ ++#ifdef DEBUG /* integrity checks (Broadcom) */ ++ ++ if (hcd == NULL) { ++ DWC_ERROR("**** DWC OTG HCD URB Dequeue has NULL HCD\n"); ++ return -DWC_E_INVALID; ++ } ++ if (dwc_otg_urb == NULL) { ++ DWC_ERROR("**** DWC OTG HCD URB Dequeue has NULL URB\n"); ++ return -DWC_E_INVALID; ++ } ++ if (dwc_otg_urb->qtd == NULL) { ++ DWC_ERROR("**** DWC OTG HCD URB Dequeue with NULL QTD\n"); ++ return -DWC_E_INVALID; ++ } ++ urb_qtd = dwc_otg_urb->qtd; ++ if (urb_qtd->qh == NULL) { ++ DWC_ERROR("**** DWC OTG HCD URB Dequeue with QTD with NULL Q handler\n"); ++ return -DWC_E_INVALID; ++ } ++#else ++ urb_qtd = dwc_otg_urb->qtd; ++#endif ++ qh = urb_qtd->qh; ++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { ++ if (urb_qtd->in_process) { ++ dump_channel_info(hcd, qh); ++ } ++ } ++#ifdef DEBUG /* integrity checks (Broadcom) */ ++ if (hcd->core_if == NULL) { ++ DWC_ERROR("**** DWC OTG HCD URB Dequeue HCD has NULL core_if\n"); ++ return -DWC_E_INVALID; ++ } ++#endif ++ if (urb_qtd->in_process && qh->channel) { ++ /* The QTD is in process (it has been assigned to a channel). */ ++ if (hcd->flags.b.port_connect_status) { ++ /* ++ * If still connected (i.e. in host mode), halt the ++ * channel so it can be used for other transfers. If ++ * no longer connected, the host registers can't be ++ * written to halt the channel since the core is in ++ * device mode. ++ */ ++ dwc_otg_hc_halt(hcd->core_if, qh->channel, ++ DWC_OTG_HC_XFER_URB_DEQUEUE); ++ } ++ } ++ ++ /* ++ * Free the QTD and clean up the associated QH. Leave the QH in the ++ * schedule if it has any remaining QTDs. ++ */ ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue - " ++ "delete %sQueue handler\n", ++ hcd->core_if->dma_desc_enable?"DMA ":""); ++ if (!hcd->core_if->dma_desc_enable) { ++ uint8_t b = urb_qtd->in_process; ++ dwc_otg_hcd_qtd_remove_and_free(hcd, urb_qtd, qh); ++ if (b) { ++ dwc_otg_hcd_qh_deactivate(hcd, qh, 0); ++ qh->channel = NULL; ++ } else if (DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ } ++ } else { ++ dwc_otg_hcd_qtd_remove_and_free(hcd, urb_qtd, qh); ++ } ++ return 0; ++} ++ ++int dwc_otg_hcd_endpoint_disable(dwc_otg_hcd_t * hcd, void *ep_handle, ++ int retry) ++{ ++ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; ++ int retval = 0; ++ dwc_irqflags_t flags; ++ ++ if (retry < 0) { ++ retval = -DWC_E_INVALID; ++ goto done; ++ } ++ ++ if (!qh) { ++ retval = -DWC_E_INVALID; ++ goto done; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ ++ while (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list) && retry) { ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ retry--; ++ dwc_msleep(5); ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ } ++ ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ /* ++ * Split dwc_otg_hcd_qh_remove_and_free() into qh_remove ++ * and qh_free to prevent stack dump on DWC_DMA_FREE() with ++ * irq_disabled (spinlock_irqsave) in dwc_otg_hcd_desc_list_free() ++ * and dwc_otg_hcd_frame_list_alloc(). ++ */ ++ dwc_otg_hcd_qh_free(hcd, qh); ++ ++done: ++ return retval; ++} ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30) ++int dwc_otg_hcd_endpoint_reset(dwc_otg_hcd_t * hcd, void *ep_handle) ++{ ++ int retval = 0; ++ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; ++ if (!qh) ++ return -DWC_E_INVALID; ++ ++ qh->data_toggle = DWC_OTG_HC_PID_DATA0; ++ return retval; ++} ++#endif ++ ++/** ++ * HCD Callback structure for handling mode switching. ++ */ ++static dwc_otg_cil_callbacks_t hcd_cil_callbacks = { ++ .start = dwc_otg_hcd_start_cb, ++ .stop = dwc_otg_hcd_stop_cb, ++ .disconnect = dwc_otg_hcd_disconnect_cb, ++ .session_start = dwc_otg_hcd_session_start_cb, ++ .resume_wakeup = dwc_otg_hcd_rem_wakeup_cb, ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ .sleep = dwc_otg_hcd_sleep_cb, ++#endif ++ .p = 0, ++}; ++ ++/** ++ * Reset tasklet function ++ */ ++static void reset_tasklet_func(void *data) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *) data; ++ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; ++ hprt0_data_t hprt0; ++ ++ DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n"); ++ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtrst = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ dwc_mdelay(60); ++ ++ hprt0.b.prtrst = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ dwc_otg_hcd->flags.b.port_reset_change = 1; ++} ++ ++static void qh_list_free(dwc_otg_hcd_t * hcd, dwc_list_link_t * qh_list) ++{ ++ dwc_list_link_t *item; ++ dwc_otg_qh_t *qh; ++ dwc_irqflags_t flags; ++ ++ if (!qh_list->next) { ++ /* The list hasn't been initialized yet. */ ++ return; ++ } ++ /* ++ * Hold spinlock here. Not needed in that case if bellow ++ * function is being called from ISR ++ */ ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ /* Ensure there are no QTDs or URBs left. */ ++ kill_urbs_in_qh_list(hcd, qh_list); ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ ++ DWC_LIST_FOREACH(item, qh_list) { ++ qh = DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry); ++ dwc_otg_hcd_qh_remove_and_free(hcd, qh); ++ } ++} ++ ++/** ++ * Exit from Hibernation if Host did not detect SRP from connected SRP capable ++ * Device during SRP time by host power up. ++ */ ++void dwc_otg_hcd_power_up(void *ptr) ++{ ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr; ++ ++ DWC_PRINTF("%s called\n", __FUNCTION__); ++ ++ if (!core_if->hibernation_suspend) { ++ DWC_PRINTF("Already exited from Hibernation\n"); ++ return; ++ } ++ ++ /* Switch on the voltage to the core */ ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Reset the core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Disable power clamps */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Remove reset the core signal */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable PMU interrupt */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ core_if->hibernation_suspend = 0; ++ ++ /* Disable PMU */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Enable VBUS */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.dis_vbus = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ core_if->op_state = A_HOST; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_hcd_start(core_if); ++} ++ ++/** ++ * Frees secondary storage associated with the dwc_otg_hcd structure contained ++ * in the struct usb_hcd field. ++ */ ++static void dwc_otg_hcd_free(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ int i; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n"); ++ ++ del_timers(dwc_otg_hcd); ++ ++ /* Free memory for QH/QTD lists */ ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued); ++ ++ /* Free memory for the host channels. */ ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i]; ++ ++#ifdef DEBUG ++ if (dwc_otg_hcd->core_if->hc_xfer_timer[i]) { ++ DWC_TIMER_FREE(dwc_otg_hcd->core_if->hc_xfer_timer[i]); ++ } ++#endif ++ if (hc != NULL) { ++ DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n", ++ i, hc); ++ DWC_FREE(hc); ++ } ++ } ++ ++ if (dwc_otg_hcd->core_if->dma_enable) { ++ if (dwc_otg_hcd->status_buf_dma) { ++ DWC_DMA_FREE(DWC_OTG_HCD_STATUS_BUF_SIZE, ++ dwc_otg_hcd->status_buf, ++ dwc_otg_hcd->status_buf_dma); ++ } ++ } else if (dwc_otg_hcd->status_buf != NULL) { ++ DWC_FREE(dwc_otg_hcd->status_buf); ++ } ++ DWC_SPINLOCK_FREE(dwc_otg_hcd->lock); ++ /* Set core_if's lock pointer to NULL */ ++ dwc_otg_hcd->core_if->lock = NULL; ++ ++ DWC_TIMER_FREE(dwc_otg_hcd->conn_timer); ++ DWC_TASK_FREE(dwc_otg_hcd->reset_tasklet); ++ ++#ifdef DWC_DEV_SRPCAP ++ if (dwc_otg_hcd->core_if->power_down == 2 && ++ dwc_otg_hcd->core_if->pwron_timer) { ++ DWC_TIMER_FREE(dwc_otg_hcd->core_if->pwron_timer); ++ } ++#endif ++ DWC_FREE(dwc_otg_hcd); ++} ++ ++int init_hcd_usecs(dwc_otg_hcd_t *_hcd); ++ ++int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd, dwc_otg_core_if_t * core_if) ++{ ++ int retval = 0; ++ int num_channels; ++ int i; ++ dwc_hc_t *channel; ++ ++ hcd->lock = DWC_SPINLOCK_ALLOC(); ++ DWC_DEBUGPL(DBG_HCDV, "init of HCD %p given core_if %p\n", ++ hcd, core_if); ++ if (!hcd->lock) { ++ DWC_ERROR("Could not allocate lock for pcd"); ++ DWC_FREE(hcd); ++ retval = -DWC_E_NO_MEMORY; ++ goto out; ++ } ++ hcd->core_if = core_if; ++ ++ /* Register the HCD CIL Callbacks */ ++ dwc_otg_cil_register_hcd_callbacks(hcd->core_if, ++ &hcd_cil_callbacks, hcd); ++ ++ /* Initialize the non-periodic schedule. */ ++ DWC_LIST_INIT(&hcd->non_periodic_sched_inactive); ++ DWC_LIST_INIT(&hcd->non_periodic_sched_active); ++ ++ /* Initialize the periodic schedule. */ ++ DWC_LIST_INIT(&hcd->periodic_sched_inactive); ++ DWC_LIST_INIT(&hcd->periodic_sched_ready); ++ DWC_LIST_INIT(&hcd->periodic_sched_assigned); ++ DWC_LIST_INIT(&hcd->periodic_sched_queued); ++ ++ /* ++ * Create a host channel descriptor for each host channel implemented ++ * in the controller. Initialize the channel descriptor array. ++ */ ++ DWC_CIRCLEQ_INIT(&hcd->free_hc_list); ++ num_channels = hcd->core_if->core_params->host_channels; ++ DWC_MEMSET(hcd->hc_ptr_array, 0, sizeof(hcd->hc_ptr_array)); ++ for (i = 0; i < num_channels; i++) { ++ channel = DWC_ALLOC(sizeof(dwc_hc_t)); ++ if (channel == NULL) { ++ retval = -DWC_E_NO_MEMORY; ++ DWC_ERROR("%s: host channel allocation failed\n", ++ __func__); ++ dwc_otg_hcd_free(hcd); ++ goto out; ++ } ++ channel->hc_num = i; ++ hcd->hc_ptr_array[i] = channel; ++#ifdef DEBUG ++ hcd->core_if->hc_xfer_timer[i] = ++ DWC_TIMER_ALLOC("hc timer", hc_xfer_timeout, ++ &hcd->core_if->hc_xfer_info[i]); ++#endif ++ DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i, ++ channel); ++ } ++ ++ /* Initialize the Connection timeout timer. */ ++ hcd->conn_timer = DWC_TIMER_ALLOC("Connection timer", ++ dwc_otg_hcd_connect_timeout, 0); ++ ++ printk(KERN_DEBUG "dwc_otg: Microframe scheduler %s\n", microframe_schedule ? "enabled":"disabled"); ++ if (microframe_schedule) ++ init_hcd_usecs(hcd); ++ ++ /* Initialize reset tasklet. */ ++ hcd->reset_tasklet = DWC_TASK_ALLOC("reset_tasklet", reset_tasklet_func, hcd); ++#ifdef DWC_DEV_SRPCAP ++ if (hcd->core_if->power_down == 2) { ++ /* Initialize Power on timer for Host power up in case hibernation */ ++ hcd->core_if->pwron_timer = DWC_TIMER_ALLOC("PWRON TIMER", ++ dwc_otg_hcd_power_up, core_if); ++ } ++#endif ++ ++ /* ++ * Allocate space for storing data on status transactions. Normally no ++ * data is sent, but this space acts as a bit bucket. This must be ++ * done after usb_add_hcd since that function allocates the DMA buffer ++ * pool. ++ */ ++ if (hcd->core_if->dma_enable) { ++ hcd->status_buf = ++ DWC_DMA_ALLOC(DWC_OTG_HCD_STATUS_BUF_SIZE, ++ &hcd->status_buf_dma); ++ } else { ++ hcd->status_buf = DWC_ALLOC(DWC_OTG_HCD_STATUS_BUF_SIZE); ++ } ++ if (!hcd->status_buf) { ++ retval = -DWC_E_NO_MEMORY; ++ DWC_ERROR("%s: status_buf allocation failed\n", __func__); ++ dwc_otg_hcd_free(hcd); ++ goto out; ++ } ++ ++ hcd->otg_port = 1; ++ hcd->frame_list = NULL; ++ hcd->frame_list_dma = 0; ++ hcd->periodic_qh_count = 0; ++out: ++ return retval; ++} ++ ++void dwc_otg_hcd_remove(dwc_otg_hcd_t * hcd) ++{ ++ /* Turn off all host-specific interrupts. */ ++ dwc_otg_disable_host_interrupts(hcd->core_if); ++ ++ dwc_otg_hcd_free(hcd); ++} ++ ++/** ++ * Initializes dynamic portions of the DWC_otg HCD state. ++ */ ++static void dwc_otg_hcd_reinit(dwc_otg_hcd_t * hcd) ++{ ++ int num_channels; ++ int i; ++ dwc_hc_t *channel; ++ dwc_hc_t *channel_tmp; ++ ++ hcd->flags.d32 = 0; ++ ++ hcd->non_periodic_qh_ptr = &hcd->non_periodic_sched_active; ++ if (!microframe_schedule) { ++ hcd->non_periodic_channels = 0; ++ hcd->periodic_channels = 0; ++ } else { ++ hcd->available_host_channels = hcd->core_if->core_params->host_channels; ++ } ++ /* ++ * Put all channels in the free channel list and clean up channel ++ * states. ++ */ ++ DWC_CIRCLEQ_FOREACH_SAFE(channel, channel_tmp, ++ &hcd->free_hc_list, hc_list_entry) { ++ DWC_CIRCLEQ_REMOVE(&hcd->free_hc_list, channel, hc_list_entry); ++ } ++ ++ num_channels = hcd->core_if->core_params->host_channels; ++ for (i = 0; i < num_channels; i++) { ++ channel = hcd->hc_ptr_array[i]; ++ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, channel, ++ hc_list_entry); ++ dwc_otg_hc_cleanup(hcd->core_if, channel); ++ } ++ ++ /* Initialize the DWC core for host mode operation. */ ++ dwc_otg_core_host_init(hcd->core_if); ++ ++ /* Set core_if's lock pointer to the hcd->lock */ ++ hcd->core_if->lock = hcd->lock; ++} ++ ++/** ++ * Assigns transactions from a QTD to a free host channel and initializes the ++ * host channel to perform the transactions. The host channel is removed from ++ * the free list. ++ * ++ * @param hcd The HCD state structure. ++ * @param qh Transactions from the first QTD for this QH are selected and ++ * assigned to a free host channel. ++ */ ++static void assign_and_init_hc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ dwc_hc_t *hc; ++ dwc_otg_qtd_t *qtd; ++ dwc_otg_hcd_urb_t *urb; ++ void* ptr = NULL; ++ ++ qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); ++ ++ urb = qtd->urb; ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p) - urb %x, actual_length %d\n", __func__, hcd, qh, (unsigned int)urb, urb->actual_length); ++ ++ if (((urb->actual_length < 0) || (urb->actual_length > urb->length)) && !dwc_otg_hcd_is_pipe_in(&urb->pipe_info)) ++ urb->actual_length = urb->length; ++ ++ ++ hc = DWC_CIRCLEQ_FIRST(&hcd->free_hc_list); ++ ++ /* Remove the host channel from the free list. */ ++ DWC_CIRCLEQ_REMOVE_INIT(&hcd->free_hc_list, hc, hc_list_entry); ++ ++ qh->channel = hc; ++ ++ qtd->in_process = 1; ++ ++ /* ++ * Use usb_pipedevice to determine device address. This address is ++ * 0 before the SET_ADDRESS command and the correct address afterward. ++ */ ++ hc->dev_addr = dwc_otg_hcd_get_dev_addr(&urb->pipe_info); ++ hc->ep_num = dwc_otg_hcd_get_ep_num(&urb->pipe_info); ++ hc->speed = qh->dev_speed; ++ hc->max_packet = dwc_max_packet(qh->maxp); ++ ++ hc->xfer_started = 0; ++ hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS; ++ hc->error_state = (qtd->error_count > 0); ++ hc->halt_on_queue = 0; ++ hc->halt_pending = 0; ++ hc->requests = 0; ++ ++ /* ++ * The following values may be modified in the transfer type section ++ * below. The xfer_len value may be reduced when the transfer is ++ * started to accommodate the max widths of the XferSize and PktCnt ++ * fields in the HCTSIZn register. ++ */ ++ ++ hc->ep_is_in = (dwc_otg_hcd_is_pipe_in(&urb->pipe_info) != 0); ++ if (hc->ep_is_in) { ++ hc->do_ping = 0; ++ } else { ++ hc->do_ping = qh->ping_state; ++ } ++ ++ hc->data_pid_start = qh->data_toggle; ++ hc->multi_count = 1; ++ ++ if (hcd->core_if->dma_enable) { ++ hc->xfer_buff = (uint8_t *) urb->dma + urb->actual_length; ++ ++ /* For non-dword aligned case */ ++ if (((unsigned long)hc->xfer_buff & 0x3) ++ && !hcd->core_if->dma_desc_enable) { ++ ptr = (uint8_t *) urb->buf + urb->actual_length; ++ } ++ } else { ++ hc->xfer_buff = (uint8_t *) urb->buf + urb->actual_length; ++ } ++ hc->xfer_len = urb->length - urb->actual_length; ++ hc->xfer_count = 0; ++ ++ /* ++ * Set the split attributes ++ */ ++ hc->do_split = 0; ++ if (qh->do_split) { ++ uint32_t hub_addr, port_addr; ++ hc->do_split = 1; ++ hc->xact_pos = qtd->isoc_split_pos; ++ hc->complete_split = qtd->complete_split; ++ hcd->fops->hub_info(hcd, urb->priv, &hub_addr, &port_addr); ++ hc->hub_addr = (uint8_t) hub_addr; ++ hc->port_addr = (uint8_t) port_addr; ++ } ++ ++ switch (dwc_otg_hcd_get_pipe_type(&urb->pipe_info)) { ++ case UE_CONTROL: ++ hc->ep_type = DWC_OTG_EP_TYPE_CONTROL; ++ switch (qtd->control_phase) { ++ case DWC_OTG_CONTROL_SETUP: ++ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction\n"); ++ hc->do_ping = 0; ++ hc->ep_is_in = 0; ++ hc->data_pid_start = DWC_OTG_HC_PID_SETUP; ++ if (hcd->core_if->dma_enable) { ++ hc->xfer_buff = (uint8_t *) urb->setup_dma; ++ } else { ++ hc->xfer_buff = (uint8_t *) urb->setup_packet; ++ } ++ hc->xfer_len = 8; ++ ptr = NULL; ++ break; ++ case DWC_OTG_CONTROL_DATA: ++ DWC_DEBUGPL(DBG_HCDV, " Control data transaction\n"); ++ hc->data_pid_start = qtd->data_toggle; ++ break; ++ case DWC_OTG_CONTROL_STATUS: ++ /* ++ * Direction is opposite of data direction or IN if no ++ * data. ++ */ ++ DWC_DEBUGPL(DBG_HCDV, " Control status transaction\n"); ++ if (urb->length == 0) { ++ hc->ep_is_in = 1; ++ } else { ++ hc->ep_is_in = ++ dwc_otg_hcd_is_pipe_out(&urb->pipe_info); ++ } ++ if (hc->ep_is_in) { ++ hc->do_ping = 0; ++ } ++ ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA1; ++ ++ hc->xfer_len = 0; ++ if (hcd->core_if->dma_enable) { ++ hc->xfer_buff = (uint8_t *) hcd->status_buf_dma; ++ } else { ++ hc->xfer_buff = (uint8_t *) hcd->status_buf; ++ } ++ ptr = NULL; ++ break; ++ } ++ break; ++ case UE_BULK: ++ hc->ep_type = DWC_OTG_EP_TYPE_BULK; ++ break; ++ case UE_INTERRUPT: ++ hc->ep_type = DWC_OTG_EP_TYPE_INTR; ++ break; ++ case UE_ISOCHRONOUS: ++ { ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc; ++ ++ hc->ep_type = DWC_OTG_EP_TYPE_ISOC; ++ ++ if (hcd->core_if->dma_desc_enable) ++ break; ++ ++ frame_desc = &urb->iso_descs[qtd->isoc_frame_index]; ++ ++ frame_desc->status = 0; ++ ++ if (hcd->core_if->dma_enable) { ++ hc->xfer_buff = (uint8_t *) urb->dma; ++ } else { ++ hc->xfer_buff = (uint8_t *) urb->buf; ++ } ++ hc->xfer_buff += ++ frame_desc->offset + qtd->isoc_split_offset; ++ hc->xfer_len = ++ frame_desc->length - qtd->isoc_split_offset; ++ ++ /* For non-dword aligned buffers */ ++ if (((unsigned long)hc->xfer_buff & 0x3) ++ && hcd->core_if->dma_enable) { ++ ptr = ++ (uint8_t *) urb->buf + frame_desc->offset + ++ qtd->isoc_split_offset; ++ } else ++ ptr = NULL; ++ ++ if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) { ++ if (hc->xfer_len <= 188) { ++ hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL; ++ } else { ++ hc->xact_pos = ++ DWC_HCSPLIT_XACTPOS_BEGIN; ++ } ++ } ++ } ++ break; ++ } ++ /* non DWORD-aligned buffer case */ ++ if (ptr) { ++ uint32_t buf_size; ++ if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { ++ buf_size = hcd->core_if->core_params->max_transfer_size; ++ } else { ++ buf_size = 4096; ++ } ++ if (!qh->dw_align_buf) { ++ qh->dw_align_buf = DWC_DMA_ALLOC_ATOMIC(buf_size, ++ &qh->dw_align_buf_dma); ++ if (!qh->dw_align_buf) { ++ DWC_ERROR ++ ("%s: Failed to allocate memory to handle " ++ "non-dword aligned buffer case\n", ++ __func__); ++ return; ++ } ++ } ++ if (!hc->ep_is_in) { ++ dwc_memcpy(qh->dw_align_buf, ptr, hc->xfer_len); ++ } ++ hc->align_buff = qh->dw_align_buf_dma; ++ } else { ++ hc->align_buff = 0; ++ } ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * This value may be modified when the transfer is started to ++ * reflect the actual transfer length. ++ */ ++ hc->multi_count = dwc_hb_mult(qh->maxp); ++ } ++ ++ if (hcd->core_if->dma_desc_enable) ++ hc->desc_list_addr = qh->desc_list_dma; ++ ++ dwc_otg_hc_init(hcd->core_if, hc); ++ hc->qh = qh; ++} ++ ++/** ++ * This function selects transactions from the HCD transfer schedule and ++ * assigns them to available host channels. It is called from HCD interrupt ++ * handler functions. ++ * ++ * @param hcd The HCD state structure. ++ * ++ * @return The types of new transactions that were assigned to host channels. ++ */ ++dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t * hcd) ++{ ++ dwc_list_link_t *qh_ptr; ++ dwc_otg_qh_t *qh; ++ int num_channels; ++ dwc_irqflags_t flags; ++ dwc_spinlock_t *channel_lock = DWC_SPINLOCK_ALLOC(); ++ dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE; ++ ++#ifdef DEBUG_SOF ++ DWC_DEBUGPL(DBG_HCD, " Select Transactions\n"); ++#endif ++ ++#ifdef DEBUG_HOST_CHANNELS ++ last_sel_trans_num_per_scheduled = 0; ++ last_sel_trans_num_nonper_scheduled = 0; ++ last_sel_trans_num_avail_hc_at_start = hcd->available_host_channels; ++#endif /* DEBUG_HOST_CHANNELS */ ++ ++ /* Process entries in the periodic ready list. */ ++ qh_ptr = DWC_LIST_FIRST(&hcd->periodic_sched_ready); ++ ++ while (qh_ptr != &hcd->periodic_sched_ready && ++ !DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) { ++ if (microframe_schedule) { ++ // Make sure we leave one channel for non periodic transactions. ++ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); ++ if (hcd->available_host_channels <= 1) { ++ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); ++ break; ++ } ++ hcd->available_host_channels--; ++ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); ++#ifdef DEBUG_HOST_CHANNELS ++ last_sel_trans_num_per_scheduled++; ++#endif /* DEBUG_HOST_CHANNELS */ ++ } ++ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); ++ assign_and_init_hc(hcd, qh); ++ ++ /* ++ * Move the QH from the periodic ready schedule to the ++ * periodic assigned schedule. ++ */ ++ qh_ptr = DWC_LIST_NEXT(qh_ptr); ++ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); ++ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned, ++ &qh->qh_list_entry); ++ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); ++ ++ ret_val = DWC_OTG_TRANSACTION_PERIODIC; ++ } ++ ++ /* ++ * Process entries in the inactive portion of the non-periodic ++ * schedule. Some free host channels may not be used if they are ++ * reserved for periodic transfers. ++ */ ++ qh_ptr = hcd->non_periodic_sched_inactive.next; ++ num_channels = hcd->core_if->core_params->host_channels; ++ while (qh_ptr != &hcd->non_periodic_sched_inactive && ++ (microframe_schedule || hcd->non_periodic_channels < ++ num_channels - hcd->periodic_channels) && ++ !DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) { ++ ++ if (microframe_schedule) { ++ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); ++ if (hcd->available_host_channels < 1) { ++ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); ++ break; ++ } ++ hcd->available_host_channels--; ++ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); ++#ifdef DEBUG_HOST_CHANNELS ++ last_sel_trans_num_nonper_scheduled++; ++#endif /* DEBUG_HOST_CHANNELS */ ++ } ++ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); ++ ++ assign_and_init_hc(hcd, qh); ++ ++ /* ++ * Move the QH from the non-periodic inactive schedule to the ++ * non-periodic active schedule. ++ */ ++ qh_ptr = DWC_LIST_NEXT(qh_ptr); ++ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); ++ DWC_LIST_MOVE_HEAD(&hcd->non_periodic_sched_active, ++ &qh->qh_list_entry); ++ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); ++ ++ if (ret_val == DWC_OTG_TRANSACTION_NONE) { ++ ret_val = DWC_OTG_TRANSACTION_NON_PERIODIC; ++ } else { ++ ret_val = DWC_OTG_TRANSACTION_ALL; ++ } ++ ++ if (!microframe_schedule) ++ hcd->non_periodic_channels++; ++ } ++ ++#ifdef DEBUG_HOST_CHANNELS ++ last_sel_trans_num_avail_hc_at_end = hcd->available_host_channels; ++#endif /* DEBUG_HOST_CHANNELS */ ++ ++ DWC_SPINLOCK_FREE(channel_lock); ++ return ret_val; ++} ++ ++/** ++ * Attempts to queue a single transaction request for a host channel ++ * associated with either a periodic or non-periodic transfer. This function ++ * assumes that there is space available in the appropriate request queue. For ++ * an OUT transfer or SETUP transaction in Slave mode, it checks whether space ++ * is available in the appropriate Tx FIFO. ++ * ++ * @param hcd The HCD state structure. ++ * @param hc Host channel descriptor associated with either a periodic or ++ * non-periodic transfer. ++ * @param fifo_dwords_avail Number of DWORDs available in the periodic Tx ++ * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic ++ * transfers. ++ * ++ * @return 1 if a request is queued and more requests may be needed to ++ * complete the transfer, 0 if no more requests are required for this ++ * transfer, -1 if there is insufficient space in the Tx FIFO. ++ */ ++static int queue_transaction(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, uint16_t fifo_dwords_avail) ++{ ++ int retval; ++ ++ if (hcd->core_if->dma_enable) { ++ if (hcd->core_if->dma_desc_enable) { ++ if (!hc->xfer_started ++ || (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)) { ++ dwc_otg_hcd_start_xfer_ddma(hcd, hc->qh); ++ hc->qh->ping_state = 0; ++ } ++ } else if (!hc->xfer_started) { ++ dwc_otg_hc_start_transfer(hcd->core_if, hc); ++ hc->qh->ping_state = 0; ++ } ++ retval = 0; ++ } else if (hc->halt_pending) { ++ /* Don't queue a request if the channel has been halted. */ ++ retval = 0; ++ } else if (hc->halt_on_queue) { ++ dwc_otg_hc_halt(hcd->core_if, hc, hc->halt_status); ++ retval = 0; ++ } else if (hc->do_ping) { ++ if (!hc->xfer_started) { ++ dwc_otg_hc_start_transfer(hcd->core_if, hc); ++ } ++ retval = 0; ++ } else if (!hc->ep_is_in || hc->data_pid_start == DWC_OTG_HC_PID_SETUP) { ++ if ((fifo_dwords_avail * 4) >= hc->max_packet) { ++ if (!hc->xfer_started) { ++ dwc_otg_hc_start_transfer(hcd->core_if, hc); ++ retval = 1; ++ } else { ++ retval = ++ dwc_otg_hc_continue_transfer(hcd->core_if, ++ hc); ++ } ++ } else { ++ retval = -1; ++ } ++ } else { ++ if (!hc->xfer_started) { ++ dwc_otg_hc_start_transfer(hcd->core_if, hc); ++ retval = 1; ++ } else { ++ retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc); ++ } ++ } ++ ++ return retval; ++} ++ ++/** ++ * Processes periodic channels for the next frame and queues transactions for ++ * these channels to the DWC_otg controller. After queueing transactions, the ++ * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions ++ * to queue as Periodic Tx FIFO or request queue space becomes available. ++ * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled. ++ */ ++static void process_periodic_channels(dwc_otg_hcd_t * hcd) ++{ ++ hptxsts_data_t tx_status; ++ dwc_list_link_t *qh_ptr; ++ dwc_otg_qh_t *qh; ++ int status; ++ int no_queue_space = 0; ++ int no_fifo_space = 0; ++ ++ dwc_otg_host_global_regs_t *host_regs; ++ host_regs = hcd->core_if->host_if->host_global_regs; ++ ++ DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n"); ++#ifdef DEBUG ++ tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts); ++ DWC_DEBUGPL(DBG_HCDV, ++ " P Tx Req Queue Space Avail (before queue): %d\n", ++ tx_status.b.ptxqspcavail); ++ DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (before queue): %d\n", ++ tx_status.b.ptxfspcavail); ++#endif ++ ++ qh_ptr = hcd->periodic_sched_assigned.next; ++ while (qh_ptr != &hcd->periodic_sched_assigned) { ++ tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts); ++ if (tx_status.b.ptxqspcavail == 0) { ++ no_queue_space = 1; ++ break; ++ } ++ ++ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); ++ ++ /* ++ * Set a flag if we're queuing high-bandwidth in slave mode. ++ * The flag prevents any halts to get into the request queue in ++ * the middle of multiple high-bandwidth packets getting queued. ++ */ ++ if (!hcd->core_if->dma_enable && qh->channel->multi_count > 1) { ++ hcd->core_if->queuing_high_bandwidth = 1; ++ } ++ status = ++ queue_transaction(hcd, qh->channel, ++ tx_status.b.ptxfspcavail); ++ if (status < 0) { ++ no_fifo_space = 1; ++ break; ++ } ++ ++ /* ++ * In Slave mode, stay on the current transfer until there is ++ * nothing more to do or the high-bandwidth request count is ++ * reached. In DMA mode, only need to queue one request. The ++ * controller automatically handles multiple packets for ++ * high-bandwidth transfers. ++ */ ++ if (hcd->core_if->dma_enable || status == 0 || ++ qh->channel->requests == qh->channel->multi_count) { ++ qh_ptr = qh_ptr->next; ++ /* ++ * Move the QH from the periodic assigned schedule to ++ * the periodic queued schedule. ++ */ ++ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_queued, ++ &qh->qh_list_entry); ++ ++ /* done queuing high bandwidth */ ++ hcd->core_if->queuing_high_bandwidth = 0; ++ } ++ } ++ ++ if (!hcd->core_if->dma_enable) { ++ dwc_otg_core_global_regs_t *global_regs; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ global_regs = hcd->core_if->core_global_regs; ++ intr_mask.b.ptxfempty = 1; ++#ifdef DEBUG ++ tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts); ++ DWC_DEBUGPL(DBG_HCDV, ++ " P Tx Req Queue Space Avail (after queue): %d\n", ++ tx_status.b.ptxqspcavail); ++ DWC_DEBUGPL(DBG_HCDV, ++ " P Tx FIFO Space Avail (after queue): %d\n", ++ tx_status.b.ptxfspcavail); ++#endif ++ if (!DWC_LIST_EMPTY(&hcd->periodic_sched_assigned) || ++ no_queue_space || no_fifo_space) { ++ /* ++ * May need to queue more transactions as the request ++ * queue or Tx FIFO empties. Enable the periodic Tx ++ * FIFO empty interrupt. (Always use the half-empty ++ * level to ensure that new requests are loaded as ++ * soon as possible.) ++ */ ++ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, ++ intr_mask.d32); ++ } else { ++ /* ++ * Disable the Tx FIFO empty interrupt since there are ++ * no more transactions that need to be queued right ++ * now. This function is called from interrupt ++ * handlers to queue more transactions as transfer ++ * states change. ++ */ ++ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, ++ 0); ++ } ++ } ++} ++ ++/** ++ * Processes active non-periodic channels and queues transactions for these ++ * channels to the DWC_otg controller. After queueing transactions, the NP Tx ++ * FIFO Empty interrupt is enabled if there are more transactions to queue as ++ * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx ++ * FIFO Empty interrupt is disabled. ++ */ ++static void process_non_periodic_channels(dwc_otg_hcd_t * hcd) ++{ ++ gnptxsts_data_t tx_status; ++ dwc_list_link_t *orig_qh_ptr; ++ dwc_otg_qh_t *qh; ++ int status; ++ int no_queue_space = 0; ++ int no_fifo_space = 0; ++ int more_to_do = 0; ++ ++ dwc_otg_core_global_regs_t *global_regs = ++ hcd->core_if->core_global_regs; ++ ++ DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n"); ++#ifdef DEBUG ++ tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts); ++ DWC_DEBUGPL(DBG_HCDV, ++ " NP Tx Req Queue Space Avail (before queue): %d\n", ++ tx_status.b.nptxqspcavail); ++ DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (before queue): %d\n", ++ tx_status.b.nptxfspcavail); ++#endif ++ /* ++ * Keep track of the starting point. Skip over the start-of-list ++ * entry. ++ */ ++ if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) { ++ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next; ++ } ++ orig_qh_ptr = hcd->non_periodic_qh_ptr; ++ ++ /* ++ * Process once through the active list or until no more space is ++ * available in the request queue or the Tx FIFO. ++ */ ++ do { ++ tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts); ++ if (!hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) { ++ no_queue_space = 1; ++ break; ++ } ++ ++ qh = DWC_LIST_ENTRY(hcd->non_periodic_qh_ptr, dwc_otg_qh_t, ++ qh_list_entry); ++ status = ++ queue_transaction(hcd, qh->channel, ++ tx_status.b.nptxfspcavail); ++ ++ if (status > 0) { ++ more_to_do = 1; ++ } else if (status < 0) { ++ no_fifo_space = 1; ++ break; ++ } ++ ++ /* Advance to next QH, skipping start-of-list entry. */ ++ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next; ++ if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) { ++ hcd->non_periodic_qh_ptr = ++ hcd->non_periodic_qh_ptr->next; ++ } ++ ++ } while (hcd->non_periodic_qh_ptr != orig_qh_ptr); ++ ++ if (!hcd->core_if->dma_enable) { ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ intr_mask.b.nptxfempty = 1; ++ ++#ifdef DEBUG ++ tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts); ++ DWC_DEBUGPL(DBG_HCDV, ++ " NP Tx Req Queue Space Avail (after queue): %d\n", ++ tx_status.b.nptxqspcavail); ++ DWC_DEBUGPL(DBG_HCDV, ++ " NP Tx FIFO Space Avail (after queue): %d\n", ++ tx_status.b.nptxfspcavail); ++#endif ++ if (more_to_do || no_queue_space || no_fifo_space) { ++ /* ++ * May need to queue more transactions as the request ++ * queue or Tx FIFO empties. Enable the non-periodic ++ * Tx FIFO empty interrupt. (Always use the half-empty ++ * level to ensure that new requests are loaded as ++ * soon as possible.) ++ */ ++ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, ++ intr_mask.d32); ++ } else { ++ /* ++ * Disable the Tx FIFO empty interrupt since there are ++ * no more transactions that need to be queued right ++ * now. This function is called from interrupt ++ * handlers to queue more transactions as transfer ++ * states change. ++ */ ++ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, ++ 0); ++ } ++ } ++} ++ ++/** ++ * This function processes the currently active host channels and queues ++ * transactions for these channels to the DWC_otg controller. It is called ++ * from HCD interrupt handler functions. ++ * ++ * @param hcd The HCD state structure. ++ * @param tr_type The type(s) of transactions to queue (non-periodic, ++ * periodic, or both). ++ */ ++void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * hcd, ++ dwc_otg_transaction_type_e tr_type) ++{ ++#ifdef DEBUG_SOF ++ DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n"); ++#endif ++ /* Process host channels associated with periodic transfers. */ ++ if ((tr_type == DWC_OTG_TRANSACTION_PERIODIC || ++ tr_type == DWC_OTG_TRANSACTION_ALL) && ++ !DWC_LIST_EMPTY(&hcd->periodic_sched_assigned)) { ++ ++ process_periodic_channels(hcd); ++ } ++ ++ /* Process host channels associated with non-periodic transfers. */ ++ if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC || ++ tr_type == DWC_OTG_TRANSACTION_ALL) { ++ if (!DWC_LIST_EMPTY(&hcd->non_periodic_sched_active)) { ++ process_non_periodic_channels(hcd); ++ } else { ++ /* ++ * Ensure NP Tx FIFO empty interrupt is disabled when ++ * there are no non-periodic transfers to process. ++ */ ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ gintmsk.b.nptxfempty = 1; ++ DWC_MODIFY_REG32(&hcd->core_if-> ++ core_global_regs->gintmsk, gintmsk.d32, ++ 0); ++ } ++ } ++} ++ ++#ifdef DWC_HS_ELECT_TST ++/* ++ * Quick and dirty hack to implement the HS Electrical Test ++ * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature. ++ * ++ * This code was copied from our userspace app "hset". It sends a ++ * Get Device Descriptor control sequence in two parts, first the ++ * Setup packet by itself, followed some time later by the In and ++ * Ack packets. Rather than trying to figure out how to add this ++ * functionality to the normal driver code, we just hijack the ++ * hardware, using these two function to drive the hardware ++ * directly. ++ */ ++ ++static dwc_otg_core_global_regs_t *global_regs; ++static dwc_otg_host_global_regs_t *hc_global_regs; ++static dwc_otg_hc_regs_t *hc_regs; ++static uint32_t *data_fifo; ++ ++static void do_setup(void) ++{ ++ gintsts_data_t gintsts; ++ hctsiz_data_t hctsiz; ++ hcchar_data_t hcchar; ++ haint_data_t haint; ++ hcint_data_t hcint; ++ ++ /* Enable HAINTs */ ++ DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0001); ++ ++ /* Enable HCINTs */ ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x04a3); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* ++ * Send Setup packet (Get Device Descriptor) ++ */ ++ ++ /* Make sure channel is disabled */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ hcchar.b.chdis = 1; ++// hcchar.b.chen = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ //sleep(1); ++ dwc_mdelay(1000); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ } ++ ++ /* Set HCTSIZ */ ++ hctsiz.d32 = 0; ++ hctsiz.b.xfersize = 8; ++ hctsiz.b.pktcnt = 1; ++ hctsiz.b.pid = DWC_OTG_HC_PID_SETUP; ++ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ /* Set HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; ++ hcchar.b.epdir = 0; ++ hcchar.b.epnum = 0; ++ hcchar.b.mps = 8; ++ hcchar.b.chen = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ ++ /* Fill FIFO with Setup data for Get Device Descriptor */ ++ data_fifo = (uint32_t *) ((char *)global_regs + 0x1000); ++ DWC_WRITE_REG32(data_fifo++, 0x01000680); ++ DWC_WRITE_REG32(data_fifo++, 0x00080000); ++ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Wait for host channel interrupt */ ++ do { ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ } while (gintsts.b.hcintr == 0); ++ ++ /* Disable HCINTs */ ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x0000); ++ ++ /* Disable HAINTs */ ++ DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0000); ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++} ++ ++static void do_in_ack(void) ++{ ++ gintsts_data_t gintsts; ++ hctsiz_data_t hctsiz; ++ hcchar_data_t hcchar; ++ haint_data_t haint; ++ hcint_data_t hcint; ++ host_grxsts_data_t grxsts; ++ ++ /* Enable HAINTs */ ++ DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0001); ++ ++ /* Enable HCINTs */ ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x04a3); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* ++ * Receive Control In packet ++ */ ++ ++ /* Make sure channel is disabled */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ hcchar.b.chdis = 1; ++ hcchar.b.chen = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ //sleep(1); ++ dwc_mdelay(1000); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ } ++ ++ /* Set HCTSIZ */ ++ hctsiz.d32 = 0; ++ hctsiz.b.xfersize = 8; ++ hctsiz.b.pktcnt = 1; ++ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; ++ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ /* Set HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; ++ hcchar.b.epdir = 1; ++ hcchar.b.epnum = 0; ++ hcchar.b.mps = 8; ++ hcchar.b.chen = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Wait for receive status queue interrupt */ ++ do { ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ } while (gintsts.b.rxstsqlvl == 0); ++ ++ /* Read RXSTS */ ++ grxsts.d32 = DWC_READ_REG32(&global_regs->grxstsp); ++ ++ /* Clear RXSTSQLVL in GINTSTS */ ++ gintsts.d32 = 0; ++ gintsts.b.rxstsqlvl = 1; ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ switch (grxsts.b.pktsts) { ++ case DWC_GRXSTS_PKTSTS_IN: ++ /* Read the data into the host buffer */ ++ if (grxsts.b.bcnt > 0) { ++ int i; ++ int word_count = (grxsts.b.bcnt + 3) / 4; ++ ++ data_fifo = (uint32_t *) ((char *)global_regs + 0x1000); ++ ++ for (i = 0; i < word_count; i++) { ++ (void)DWC_READ_REG32(data_fifo++); ++ } ++ } ++ break; ++ ++ default: ++ break; ++ } ++ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Wait for receive status queue interrupt */ ++ do { ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ } while (gintsts.b.rxstsqlvl == 0); ++ ++ /* Read RXSTS */ ++ grxsts.d32 = DWC_READ_REG32(&global_regs->grxstsp); ++ ++ /* Clear RXSTSQLVL in GINTSTS */ ++ gintsts.d32 = 0; ++ gintsts.b.rxstsqlvl = 1; ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ switch (grxsts.b.pktsts) { ++ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: ++ break; ++ ++ default: ++ break; ++ } ++ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Wait for host channel interrupt */ ++ do { ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ } while (gintsts.b.hcintr == 0); ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++// usleep(100000); ++// mdelay(100); ++ dwc_mdelay(1); ++ ++ /* ++ * Send handshake packet ++ */ ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Make sure channel is disabled */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ hcchar.b.chdis = 1; ++ hcchar.b.chen = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ //sleep(1); ++ dwc_mdelay(1000); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ } ++ ++ /* Set HCTSIZ */ ++ hctsiz.d32 = 0; ++ hctsiz.b.xfersize = 0; ++ hctsiz.b.pktcnt = 1; ++ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; ++ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ /* Set HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; ++ hcchar.b.epdir = 0; ++ hcchar.b.epnum = 0; ++ hcchar.b.mps = 8; ++ hcchar.b.chen = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Wait for host channel interrupt */ ++ do { ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ } while (gintsts.b.hcintr == 0); ++ ++ /* Disable HCINTs */ ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x0000); ++ ++ /* Disable HAINTs */ ++ DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0000); ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++} ++#endif ++ ++/** Handles hub class-specific requests. */ ++int dwc_otg_hcd_hub_control(dwc_otg_hcd_t * dwc_otg_hcd, ++ uint16_t typeReq, ++ uint16_t wValue, ++ uint16_t wIndex, uint8_t * buf, uint16_t wLength) ++{ ++ int retval = 0; ++ ++ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; ++ usb_hub_descriptor_t *hub_desc; ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ ++ uint32_t port_status; ++ ++ switch (typeReq) { ++ case UCR_CLEAR_HUB_FEATURE: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearHubFeature 0x%x\n", wValue); ++ switch (wValue) { ++ case UHF_C_HUB_LOCAL_POWER: ++ case UHF_C_HUB_OVER_CURRENT: ++ /* Nothing required here */ ++ break; ++ default: ++ retval = -DWC_E_INVALID; ++ DWC_ERROR("DWC OTG HCD - " ++ "ClearHubFeature request %xh unknown\n", ++ wValue); ++ } ++ break; ++ case UCR_CLEAR_PORT_FEATURE: ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ if (wValue != UHF_PORT_L1) ++#endif ++ if (!wIndex || wIndex > 1) ++ goto error; ++ ++ switch (wValue) { ++ case UHF_PORT_ENABLE: ++ DWC_DEBUGPL(DBG_ANY, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_ENABLE\n"); ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtena = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ break; ++ case UHF_PORT_SUSPEND: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); ++ ++ if (core_if->power_down == 2) { ++ dwc_otg_host_hibernation_restore(core_if, 0, 0); ++ } else { ++ DWC_WRITE_REG32(core_if->pcgcctl, 0); ++ dwc_mdelay(5); ++ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtres = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ hprt0.b.prtsusp = 0; ++ /* Clear Resume bit */ ++ dwc_mdelay(100); ++ hprt0.b.prtres = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ } ++ break; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ case UHF_PORT_L1: ++ { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ glpmcfg_data_t lpmcfg = {.d32 = 0 }; ++ ++ lpmcfg.d32 = ++ DWC_READ_REG32(&core_if-> ++ core_global_regs->glpmcfg); ++ lpmcfg.b.en_utmi_sleep = 0; ++ lpmcfg.b.hird_thres &= (~(1 << 4)); ++ lpmcfg.b.prt_sleep_sts = 1; ++ DWC_WRITE_REG32(&core_if-> ++ core_global_regs->glpmcfg, ++ lpmcfg.d32); ++ ++ /* Clear Enbl_L1Gating bit. */ ++ pcgcctl.b.enbl_sleep_gating = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, ++ 0); ++ ++ dwc_mdelay(5); ++ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtres = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, ++ hprt0.d32); ++ /* This bit will be cleared in wakeup interrupt handle */ ++ break; ++ } ++#endif ++ case UHF_PORT_POWER: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_POWER\n"); ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtpwr = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ break; ++ case UHF_PORT_INDICATOR: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_INDICATOR\n"); ++ /* Port inidicator not supported */ ++ break; ++ case UHF_C_PORT_CONNECTION: ++ /* Clears drivers internal connect status change ++ * flag */ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n"); ++ dwc_otg_hcd->flags.b.port_connect_status_change = 0; ++ break; ++ case UHF_C_PORT_RESET: ++ /* Clears the driver's internal Port Reset Change ++ * flag */ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_RESET\n"); ++ dwc_otg_hcd->flags.b.port_reset_change = 0; ++ break; ++ case UHF_C_PORT_ENABLE: ++ /* Clears the driver's internal Port ++ * Enable/Disable Change flag */ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n"); ++ dwc_otg_hcd->flags.b.port_enable_change = 0; ++ break; ++ case UHF_C_PORT_SUSPEND: ++ /* Clears the driver's internal Port Suspend ++ * Change flag, which is set when resume signaling on ++ * the host port is complete */ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n"); ++ dwc_otg_hcd->flags.b.port_suspend_change = 0; ++ break; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ case UHF_C_PORT_L1: ++ dwc_otg_hcd->flags.b.port_l1_change = 0; ++ break; ++#endif ++ case UHF_C_PORT_OVER_CURRENT: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n"); ++ dwc_otg_hcd->flags.b.port_over_current_change = 0; ++ break; ++ default: ++ retval = -DWC_E_INVALID; ++ DWC_ERROR("DWC OTG HCD - " ++ "ClearPortFeature request %xh " ++ "unknown or unsupported\n", wValue); ++ } ++ break; ++ case UCR_GET_HUB_DESCRIPTOR: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "GetHubDescriptor\n"); ++ hub_desc = (usb_hub_descriptor_t *) buf; ++ hub_desc->bDescLength = 9; ++ hub_desc->bDescriptorType = 0x29; ++ hub_desc->bNbrPorts = 1; ++ USETW(hub_desc->wHubCharacteristics, 0x08); ++ hub_desc->bPwrOn2PwrGood = 1; ++ hub_desc->bHubContrCurrent = 0; ++ hub_desc->DeviceRemovable[0] = 0; ++ hub_desc->DeviceRemovable[1] = 0xff; ++ break; ++ case UCR_GET_HUB_STATUS: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "GetHubStatus\n"); ++ DWC_MEMSET(buf, 0, 4); ++ break; ++ case UCR_GET_PORT_STATUS: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "GetPortStatus wIndex = 0x%04x FLAGS=0x%08x\n", ++ wIndex, dwc_otg_hcd->flags.d32); ++ if (!wIndex || wIndex > 1) ++ goto error; ++ ++ port_status = 0; ++ ++ if (dwc_otg_hcd->flags.b.port_connect_status_change) ++ port_status |= (1 << UHF_C_PORT_CONNECTION); ++ ++ if (dwc_otg_hcd->flags.b.port_enable_change) ++ port_status |= (1 << UHF_C_PORT_ENABLE); ++ ++ if (dwc_otg_hcd->flags.b.port_suspend_change) ++ port_status |= (1 << UHF_C_PORT_SUSPEND); ++ ++ if (dwc_otg_hcd->flags.b.port_l1_change) ++ port_status |= (1 << UHF_C_PORT_L1); ++ ++ if (dwc_otg_hcd->flags.b.port_reset_change) { ++ port_status |= (1 << UHF_C_PORT_RESET); ++ } ++ ++ if (dwc_otg_hcd->flags.b.port_over_current_change) { ++ DWC_WARN("Overcurrent change detected\n"); ++ port_status |= (1 << UHF_C_PORT_OVER_CURRENT); ++ } ++ ++ if (!dwc_otg_hcd->flags.b.port_connect_status) { ++ /* ++ * The port is disconnected, which means the core is ++ * either in device mode or it soon will be. Just ++ * return 0's for the remainder of the port status ++ * since the port register can't be read if the core ++ * is in device mode. ++ */ ++ *((__le32 *) buf) = dwc_cpu_to_le32(&port_status); ++ break; ++ } ++ ++ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); ++ DWC_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hprt0.d32); ++ ++ if (hprt0.b.prtconnsts) ++ port_status |= (1 << UHF_PORT_CONNECTION); ++ ++ if (hprt0.b.prtena) ++ port_status |= (1 << UHF_PORT_ENABLE); ++ ++ if (hprt0.b.prtsusp) ++ port_status |= (1 << UHF_PORT_SUSPEND); ++ ++ if (hprt0.b.prtovrcurract) ++ port_status |= (1 << UHF_PORT_OVER_CURRENT); ++ ++ if (hprt0.b.prtrst) ++ port_status |= (1 << UHF_PORT_RESET); ++ ++ if (hprt0.b.prtpwr) ++ port_status |= (1 << UHF_PORT_POWER); ++ ++ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) ++ port_status |= (1 << UHF_PORT_HIGH_SPEED); ++ else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) ++ port_status |= (1 << UHF_PORT_LOW_SPEED); ++ ++ if (hprt0.b.prttstctl) ++ port_status |= (1 << UHF_PORT_TEST); ++ if (dwc_otg_get_lpm_portsleepstatus(dwc_otg_hcd->core_if)) { ++ port_status |= (1 << UHF_PORT_L1); ++ } ++ /* ++ For Synopsys HW emulation of Power down wkup_control asserts the ++ hreset_n and prst_n on suspned. This causes the HPRT0 to be zero. ++ We intentionally tell the software that port is in L2Suspend state. ++ Only for STE. ++ */ ++ if ((core_if->power_down == 2) ++ && (core_if->hibernation_suspend == 1)) { ++ port_status |= (1 << UHF_PORT_SUSPEND); ++ } ++ /* USB_PORT_FEAT_INDICATOR unsupported always 0 */ ++ ++ *((__le32 *) buf) = dwc_cpu_to_le32(&port_status); ++ ++ break; ++ case UCR_SET_HUB_FEATURE: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "SetHubFeature\n"); ++ /* No HUB features supported */ ++ break; ++ case UCR_SET_PORT_FEATURE: ++ if (wValue != UHF_PORT_TEST && (!wIndex || wIndex > 1)) ++ goto error; ++ ++ if (!dwc_otg_hcd->flags.b.port_connect_status) { ++ /* ++ * The port is disconnected, which means the core is ++ * either in device mode or it soon will be. Just ++ * return without doing anything since the port ++ * register can't be written if the core is in device ++ * mode. ++ */ ++ break; ++ } ++ ++ switch (wValue) { ++ case UHF_PORT_SUSPEND: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_SUSPEND\n"); ++ if (dwc_otg_hcd_otg_port(dwc_otg_hcd) != wIndex) { ++ goto error; ++ } ++ if (core_if->power_down == 2) { ++ int timeout = 300; ++ dwc_irqflags_t flags; ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ gusbcfg_data_t gusbcfg = {.d32 = 0 }; ++#ifdef DWC_DEV_SRPCAP ++ int32_t otg_cap_param = core_if->core_params->otg_cap; ++#endif ++ DWC_PRINTF("Preparing for complete power-off\n"); ++ ++ /* Save registers before hibernation */ ++ dwc_otg_save_global_regs(core_if); ++ dwc_otg_save_host_regs(core_if); ++ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtsusp = 1; ++ hprt0.b.prtena = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ /* Spin hprt0.b.prtsusp to became 1 */ ++ do { ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ if (hprt0.b.prtsusp) { ++ break; ++ } ++ dwc_mdelay(1); ++ } while (--timeout); ++ if (!timeout) { ++ DWC_WARN("Suspend wasn't genereted\n"); ++ } ++ dwc_udelay(10); ++ ++ /* ++ * We need to disable interrupts to prevent servicing of any IRQ ++ * during going to hibernation ++ */ ++ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags); ++ core_if->lx_state = DWC_OTG_L2; ++#ifdef DWC_DEV_SRPCAP ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtpwr = 0; ++ hprt0.b.prtena = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, ++ hprt0.d32); ++#endif ++ gusbcfg.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs-> ++ gusbcfg); ++ if (gusbcfg.b.ulpi_utmi_sel == 1) { ++ /* ULPI interface */ ++ /* Suspend the Phy Clock */ ++ pcgcctl.d32 = 0; ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, ++ pcgcctl.d32); ++ dwc_udelay(10); ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ } else { ++ /* UTMI+ Interface */ ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); ++ dwc_udelay(10); ++ } ++#ifdef DWC_DEV_SRPCAP ++ gpwrdn.d32 = 0; ++ gpwrdn.b.dis_vbus = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++#endif ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ gpwrdn.d32 = 0; ++#ifdef DWC_DEV_SRPCAP ++ gpwrdn.b.srp_det_msk = 1; ++#endif ++ gpwrdn.b.disconn_det_msk = 1; ++ gpwrdn.b.lnstchng_msk = 1; ++ gpwrdn.b.sts_chngint_msk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Enable Power Down Clamp and all interrupts in GPWRDN */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Switch off VDD */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ ++#ifdef DWC_DEV_SRPCAP ++ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) ++ { ++ core_if->pwron_timer_started = 1; ++ DWC_TIMER_SCHEDULE(core_if->pwron_timer, 6000 /* 6 secs */ ); ++ } ++#endif ++ /* Save gpwrdn register for further usage if stschng interrupt */ ++ core_if->gr_backup->gpwrdn_local = ++ DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ ++ /* Set flag to indicate that we are in hibernation */ ++ core_if->hibernation_suspend = 1; ++ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock,flags); ++ ++ DWC_PRINTF("Host hibernation completed\n"); ++ // Exit from case statement ++ break; ++ ++ } ++ if (dwc_otg_hcd_otg_port(dwc_otg_hcd) == wIndex && ++ dwc_otg_hcd->fops->get_b_hnp_enable(dwc_otg_hcd)) { ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ gotgctl.b.hstsethnpen = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gotgctl, 0, gotgctl.d32); ++ core_if->op_state = A_SUSPEND; ++ } ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtsusp = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ { ++ dwc_irqflags_t flags; ++ /* Update lx_state */ ++ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags); ++ core_if->lx_state = DWC_OTG_L2; ++ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags); ++ } ++ /* Suspend the Phy Clock */ ++ { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, ++ pcgcctl.d32); ++ dwc_udelay(10); ++ } ++ ++ /* For HNP the bus must be suspended for at least 200ms. */ ++ if (dwc_otg_hcd->fops->get_b_hnp_enable(dwc_otg_hcd)) { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); ++ dwc_mdelay(200); ++ } ++ ++ /** @todo - check how sw can wait for 1 sec to check asesvld??? */ ++#if 0 //vahrama !!!!!!!!!!!!!!!!!! ++ if (core_if->adp_enable) { ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ gpwrdn_data_t gpwrdn; ++ ++ while (gotgctl.b.asesvld == 1) { ++ gotgctl.d32 = ++ DWC_READ_REG32(&core_if-> ++ core_global_regs-> ++ gotgctl); ++ dwc_mdelay(100); ++ } ++ ++ /* Enable Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ ++ /* Unmask SRP detected interrupt from Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.srp_det_msk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ ++ dwc_otg_adp_probe_start(core_if); ++ } ++#endif ++ break; ++ case UHF_PORT_POWER: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_POWER\n"); ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtpwr = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ break; ++ case UHF_PORT_RESET: ++ if ((core_if->power_down == 2) ++ && (core_if->hibernation_suspend == 1)) { ++ /* If we are going to exit from Hibernated ++ * state via USB RESET. ++ */ ++ dwc_otg_host_hibernation_restore(core_if, 0, 1); ++ } else { ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ ++ DWC_DEBUGPL(DBG_HCD, ++ "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_RESET\n"); ++ { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ pcgcctl.b.enbl_sleep_gating = 1; ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); ++ DWC_WRITE_REG32(core_if->pcgcctl, 0); ++ } ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ { ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ if (lpmcfg.b.prt_sleep_sts) { ++ lpmcfg.b.en_utmi_sleep = 0; ++ lpmcfg.b.hird_thres &= (~(1 << 4)); ++ DWC_WRITE_REG32 ++ (&core_if->core_global_regs->glpmcfg, ++ lpmcfg.d32); ++ dwc_mdelay(1); ++ } ++ } ++#endif ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ /* Clear suspend bit if resetting from suspended state. */ ++ hprt0.b.prtsusp = 0; ++ /* When B-Host the Port reset bit is set in ++ * the Start HCD Callback function, so that ++ * the reset is started within 1ms of the HNP ++ * success interrupt. */ ++ if (!dwc_otg_hcd_is_b_host(dwc_otg_hcd)) { ++ hprt0.b.prtpwr = 1; ++ hprt0.b.prtrst = 1; ++ DWC_PRINTF("Indeed it is in host mode hprt0 = %08x\n",hprt0.d32); ++ DWC_WRITE_REG32(core_if->host_if->hprt0, ++ hprt0.d32); ++ } ++ /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */ ++ dwc_mdelay(60); ++ hprt0.b.prtrst = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ core_if->lx_state = DWC_OTG_L0; /* Now back to the on state */ ++ } ++ break; ++#ifdef DWC_HS_ELECT_TST ++ case UHF_PORT_TEST: ++ { ++ uint32_t t; ++ gintmsk_data_t gintmsk; ++ ++ t = (wIndex >> 8); /* MSB wIndex USB */ ++ DWC_DEBUGPL(DBG_HCD, ++ "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_TEST %d\n", ++ t); ++ DWC_WARN("USB_PORT_FEAT_TEST %d\n", t); ++ if (t < 6) { ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prttstctl = t; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, ++ hprt0.d32); ++ } else { ++ /* Setup global vars with reg addresses (quick and ++ * dirty hack, should be cleaned up) ++ */ ++ global_regs = core_if->core_global_regs; ++ hc_global_regs = ++ core_if->host_if->host_global_regs; ++ hc_regs = ++ (dwc_otg_hc_regs_t *) ((char *) ++ global_regs + ++ 0x500); ++ data_fifo = ++ (uint32_t *) ((char *)global_regs + ++ 0x1000); ++ ++ if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */ ++ /* Save current interrupt mask */ ++ gintmsk.d32 = ++ DWC_READ_REG32 ++ (&global_regs->gintmsk); ++ ++ /* Disable all interrupts while we muck with ++ * the hardware directly ++ */ ++ DWC_WRITE_REG32(&global_regs->gintmsk, 0); ++ ++ /* 15 second delay per the test spec */ ++ dwc_mdelay(15000); ++ ++ /* Drive suspend on the root port */ ++ hprt0.d32 = ++ dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtsusp = 1; ++ hprt0.b.prtres = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ ++ /* 15 second delay per the test spec */ ++ dwc_mdelay(15000); ++ ++ /* Drive resume on the root port */ ++ hprt0.d32 = ++ dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtsusp = 0; ++ hprt0.b.prtres = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ dwc_mdelay(100); ++ ++ /* Clear the resume bit */ ++ hprt0.b.prtres = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ ++ /* Restore interrupts */ ++ DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32); ++ } else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */ ++ /* Save current interrupt mask */ ++ gintmsk.d32 = ++ DWC_READ_REG32 ++ (&global_regs->gintmsk); ++ ++ /* Disable all interrupts while we muck with ++ * the hardware directly ++ */ ++ DWC_WRITE_REG32(&global_regs->gintmsk, 0); ++ ++ /* 15 second delay per the test spec */ ++ dwc_mdelay(15000); ++ ++ /* Send the Setup packet */ ++ do_setup(); ++ ++ /* 15 second delay so nothing else happens for awhile */ ++ dwc_mdelay(15000); ++ ++ /* Restore interrupts */ ++ DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32); ++ } else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */ ++ /* Save current interrupt mask */ ++ gintmsk.d32 = ++ DWC_READ_REG32 ++ (&global_regs->gintmsk); ++ ++ /* Disable all interrupts while we muck with ++ * the hardware directly ++ */ ++ DWC_WRITE_REG32(&global_regs->gintmsk, 0); ++ ++ /* Send the Setup packet */ ++ do_setup(); ++ ++ /* 15 second delay so nothing else happens for awhile */ ++ dwc_mdelay(15000); ++ ++ /* Send the In and Ack packets */ ++ do_in_ack(); ++ ++ /* 15 second delay so nothing else happens for awhile */ ++ dwc_mdelay(15000); ++ ++ /* Restore interrupts */ ++ DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32); ++ } ++ } ++ break; ++ } ++#endif /* DWC_HS_ELECT_TST */ ++ ++ case UHF_PORT_INDICATOR: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_INDICATOR\n"); ++ /* Not supported */ ++ break; ++ default: ++ retval = -DWC_E_INVALID; ++ DWC_ERROR("DWC OTG HCD - " ++ "SetPortFeature request %xh " ++ "unknown or unsupported\n", wValue); ++ break; ++ } ++ break; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ case UCR_SET_AND_TEST_PORT_FEATURE: ++ if (wValue != UHF_PORT_L1) { ++ goto error; ++ } ++ { ++ int portnum, hird, devaddr, remwake; ++ glpmcfg_data_t lpmcfg; ++ uint32_t time_usecs; ++ gintsts_data_t gintsts; ++ gintmsk_data_t gintmsk; ++ ++ if (!dwc_otg_get_param_lpm_enable(core_if)) { ++ goto error; ++ } ++ if (wValue != UHF_PORT_L1 || wLength != 1) { ++ goto error; ++ } ++ /* Check if the port currently is in SLEEP state */ ++ lpmcfg.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ if (lpmcfg.b.prt_sleep_sts) { ++ DWC_INFO("Port is already in sleep mode\n"); ++ buf[0] = 0; /* Return success */ ++ break; ++ } ++ ++ portnum = wIndex & 0xf; ++ hird = (wIndex >> 4) & 0xf; ++ devaddr = (wIndex >> 8) & 0x7f; ++ remwake = (wIndex >> 15); ++ ++ if (portnum != 1) { ++ retval = -DWC_E_INVALID; ++ DWC_WARN ++ ("Wrong port number(%d) in SetandTestPortFeature request\n", ++ portnum); ++ break; ++ } ++ ++ DWC_PRINTF ++ ("SetandTestPortFeature request: portnum = %d, hird = %d, devaddr = %d, rewake = %d\n", ++ portnum, hird, devaddr, remwake); ++ /* Disable LPM interrupt */ ++ gintmsk.d32 = 0; ++ gintmsk.b.lpmtranrcvd = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, ++ gintmsk.d32, 0); ++ ++ if (dwc_otg_hcd_send_lpm ++ (dwc_otg_hcd, devaddr, hird, remwake)) { ++ retval = -DWC_E_INVALID; ++ break; ++ } ++ ++ time_usecs = 10 * (lpmcfg.b.retry_count + 1); ++ /* We will consider timeout if time_usecs microseconds pass, ++ * and we don't receive LPM transaction status. ++ * After receiving non-error responce(ACK/NYET/STALL) from device, ++ * core will set lpmtranrcvd bit. ++ */ ++ do { ++ gintsts.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ if (gintsts.b.lpmtranrcvd) { ++ break; ++ } ++ dwc_udelay(1); ++ } while (--time_usecs); ++ /* lpm_int bit will be cleared in LPM interrupt handler */ ++ ++ /* Now fill status ++ * 0x00 - Success ++ * 0x10 - NYET ++ * 0x11 - Timeout ++ */ ++ if (!gintsts.b.lpmtranrcvd) { ++ buf[0] = 0x3; /* Completion code is Timeout */ ++ dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd); ++ } else { ++ lpmcfg.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ if (lpmcfg.b.lpm_resp == 0x3) { ++ /* ACK responce from the device */ ++ buf[0] = 0x00; /* Success */ ++ } else if (lpmcfg.b.lpm_resp == 0x2) { ++ /* NYET responce from the device */ ++ buf[0] = 0x2; ++ } else { ++ /* Otherwise responce with Timeout */ ++ buf[0] = 0x3; ++ } ++ } ++ DWC_PRINTF("Device responce to LPM trans is %x\n", ++ lpmcfg.b.lpm_resp); ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, ++ gintmsk.d32); ++ ++ break; ++ } ++#endif /* CONFIG_USB_DWC_OTG_LPM */ ++ default: ++error: ++ retval = -DWC_E_INVALID; ++ DWC_WARN("DWC OTG HCD - " ++ "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n", ++ typeReq, wIndex, wValue); ++ break; ++ } ++ ++ return retval; ++} ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++/** Returns index of host channel to perform LPM transaction. */ ++int dwc_otg_hcd_get_hc_for_lpm_tran(dwc_otg_hcd_t * hcd, uint8_t devaddr) ++{ ++ dwc_otg_core_if_t *core_if = hcd->core_if; ++ dwc_hc_t *hc; ++ hcchar_data_t hcchar; ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ ++ if (DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) { ++ DWC_PRINTF("No free channel to select for LPM transaction\n"); ++ return -1; ++ } ++ ++ hc = DWC_CIRCLEQ_FIRST(&hcd->free_hc_list); ++ ++ /* Mask host channel interrupts. */ ++ gintmsk.b.hcintr = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0); ++ ++ /* Fill fields that core needs for LPM transaction */ ++ hcchar.b.devaddr = devaddr; ++ hcchar.b.epnum = 0; ++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; ++ hcchar.b.mps = 64; ++ hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW); ++ hcchar.b.epdir = 0; /* OUT */ ++ DWC_WRITE_REG32(&core_if->host_if->hc_regs[hc->hc_num]->hcchar, ++ hcchar.d32); ++ ++ /* Remove the host channel from the free list. */ ++ DWC_CIRCLEQ_REMOVE_INIT(&hcd->free_hc_list, hc, hc_list_entry); ++ ++ DWC_PRINTF("hcnum = %d devaddr = %d\n", hc->hc_num, devaddr); ++ ++ return hc->hc_num; ++} ++ ++/** Release hc after performing LPM transaction */ ++void dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd_t * hcd) ++{ ++ dwc_hc_t *hc; ++ glpmcfg_data_t lpmcfg; ++ uint8_t hc_num; ++ ++ lpmcfg.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->glpmcfg); ++ hc_num = lpmcfg.b.lpm_chan_index; ++ ++ hc = hcd->hc_ptr_array[hc_num]; ++ ++ DWC_PRINTF("Freeing channel %d after LPM\n", hc_num); ++ /* Return host channel to free list */ ++ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry); ++} ++ ++int dwc_otg_hcd_send_lpm(dwc_otg_hcd_t * hcd, uint8_t devaddr, uint8_t hird, ++ uint8_t bRemoteWake) ++{ ++ glpmcfg_data_t lpmcfg; ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ int channel; ++ ++ channel = dwc_otg_hcd_get_hc_for_lpm_tran(hcd, devaddr); ++ if (channel < 0) { ++ return channel; ++ } ++ ++ pcgcctl.b.enbl_sleep_gating = 1; ++ DWC_MODIFY_REG32(hcd->core_if->pcgcctl, 0, pcgcctl.d32); ++ ++ /* Read LPM config register */ ++ lpmcfg.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->glpmcfg); ++ ++ /* Program LPM transaction fields */ ++ lpmcfg.b.rem_wkup_en = bRemoteWake; ++ lpmcfg.b.hird = hird; ++ lpmcfg.b.hird_thres = 0x1c; ++ lpmcfg.b.lpm_chan_index = channel; ++ lpmcfg.b.en_utmi_sleep = 1; ++ /* Program LPM config register */ ++ DWC_WRITE_REG32(&hcd->core_if->core_global_regs->glpmcfg, lpmcfg.d32); ++ ++ /* Send LPM transaction */ ++ lpmcfg.b.send_lpm = 1; ++ DWC_WRITE_REG32(&hcd->core_if->core_global_regs->glpmcfg, lpmcfg.d32); ++ ++ return 0; ++} ++ ++#endif /* CONFIG_USB_DWC_OTG_LPM */ ++ ++int dwc_otg_hcd_is_status_changed(dwc_otg_hcd_t * hcd, int port) ++{ ++ int retval; ++ ++ if (port != 1) { ++ return -DWC_E_INVALID; ++ } ++ ++ retval = (hcd->flags.b.port_connect_status_change || ++ hcd->flags.b.port_reset_change || ++ hcd->flags.b.port_enable_change || ++ hcd->flags.b.port_suspend_change || ++ hcd->flags.b.port_over_current_change); ++#ifdef DEBUG ++ if (retval) { ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:" ++ " Root port status changed\n"); ++ DWC_DEBUGPL(DBG_HCDV, " port_connect_status_change: %d\n", ++ hcd->flags.b.port_connect_status_change); ++ DWC_DEBUGPL(DBG_HCDV, " port_reset_change: %d\n", ++ hcd->flags.b.port_reset_change); ++ DWC_DEBUGPL(DBG_HCDV, " port_enable_change: %d\n", ++ hcd->flags.b.port_enable_change); ++ DWC_DEBUGPL(DBG_HCDV, " port_suspend_change: %d\n", ++ hcd->flags.b.port_suspend_change); ++ DWC_DEBUGPL(DBG_HCDV, " port_over_current_change: %d\n", ++ hcd->flags.b.port_over_current_change); ++ } ++#endif ++ return retval; ++} ++ ++int dwc_otg_hcd_get_frame_number(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ hfnum_data_t hfnum; ++ hfnum.d32 = ++ DWC_READ_REG32(&dwc_otg_hcd->core_if->host_if->host_global_regs-> ++ hfnum); ++ ++#ifdef DEBUG_SOF ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n", ++ hfnum.b.frnum); ++#endif ++ return hfnum.b.frnum; ++} ++ ++int dwc_otg_hcd_start(dwc_otg_hcd_t * hcd, ++ struct dwc_otg_hcd_function_ops *fops) ++{ ++ int retval = 0; ++ ++ hcd->fops = fops; ++ if (!dwc_otg_is_device_mode(hcd->core_if) && ++ (!hcd->core_if->adp_enable || hcd->core_if->adp.adp_started)) { ++ dwc_otg_hcd_reinit(hcd); ++ } else { ++ retval = -DWC_E_NO_DEVICE; ++ } ++ ++ return retval; ++} ++ ++void *dwc_otg_hcd_get_priv_data(dwc_otg_hcd_t * hcd) ++{ ++ return hcd->priv; ++} ++ ++void dwc_otg_hcd_set_priv_data(dwc_otg_hcd_t * hcd, void *priv_data) ++{ ++ hcd->priv = priv_data; ++} ++ ++uint32_t dwc_otg_hcd_otg_port(dwc_otg_hcd_t * hcd) ++{ ++ return hcd->otg_port; ++} ++ ++uint32_t dwc_otg_hcd_is_b_host(dwc_otg_hcd_t * hcd) ++{ ++ uint32_t is_b_host; ++ if (hcd->core_if->op_state == B_HOST) { ++ is_b_host = 1; ++ } else { ++ is_b_host = 0; ++ } ++ ++ return is_b_host; ++} ++ ++dwc_otg_hcd_urb_t *dwc_otg_hcd_urb_alloc(dwc_otg_hcd_t * hcd, ++ int iso_desc_count, int atomic_alloc) ++{ ++ dwc_otg_hcd_urb_t *dwc_otg_urb; ++ uint32_t size; ++ ++ size = ++ sizeof(*dwc_otg_urb) + ++ iso_desc_count * sizeof(struct dwc_otg_hcd_iso_packet_desc); ++ if (atomic_alloc) ++ dwc_otg_urb = DWC_ALLOC_ATOMIC(size); ++ else ++ dwc_otg_urb = DWC_ALLOC(size); ++ ++ if (NULL != dwc_otg_urb) ++ dwc_otg_urb->packet_count = iso_desc_count; ++ else { ++ dwc_otg_urb->packet_count = 0; ++ if (size != 0) { ++ DWC_ERROR("**** DWC OTG HCD URB alloc - " ++ "%salloc of %db failed\n", ++ atomic_alloc?"atomic ":"", size); ++ } ++ } ++ ++ return dwc_otg_urb; ++} ++ ++void dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_hcd_urb_t * dwc_otg_urb, ++ uint8_t dev_addr, uint8_t ep_num, ++ uint8_t ep_type, uint8_t ep_dir, uint16_t mps) ++{ ++ dwc_otg_hcd_fill_pipe(&dwc_otg_urb->pipe_info, dev_addr, ep_num, ++ ep_type, ep_dir, mps); ++#if 0 ++ DWC_PRINTF ++ ("addr = %d, ep_num = %d, ep_dir = 0x%x, ep_type = 0x%x, mps = %d\n", ++ dev_addr, ep_num, ep_dir, ep_type, mps); ++#endif ++} ++ ++void dwc_otg_hcd_urb_set_params(dwc_otg_hcd_urb_t * dwc_otg_urb, ++ void *urb_handle, void *buf, dwc_dma_t dma, ++ uint32_t buflen, void *setup_packet, ++ dwc_dma_t setup_dma, uint32_t flags, ++ uint16_t interval) ++{ ++ dwc_otg_urb->priv = urb_handle; ++ dwc_otg_urb->buf = buf; ++ dwc_otg_urb->dma = dma; ++ dwc_otg_urb->length = buflen; ++ dwc_otg_urb->setup_packet = setup_packet; ++ dwc_otg_urb->setup_dma = setup_dma; ++ dwc_otg_urb->flags = flags; ++ dwc_otg_urb->interval = interval; ++ dwc_otg_urb->status = -DWC_E_IN_PROGRESS; ++} ++ ++uint32_t dwc_otg_hcd_urb_get_status(dwc_otg_hcd_urb_t * dwc_otg_urb) ++{ ++ return dwc_otg_urb->status; ++} ++ ++uint32_t dwc_otg_hcd_urb_get_actual_length(dwc_otg_hcd_urb_t * dwc_otg_urb) ++{ ++ return dwc_otg_urb->actual_length; ++} ++ ++uint32_t dwc_otg_hcd_urb_get_error_count(dwc_otg_hcd_urb_t * dwc_otg_urb) ++{ ++ return dwc_otg_urb->error_count; ++} ++ ++void dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_hcd_urb_t * dwc_otg_urb, ++ int desc_num, uint32_t offset, ++ uint32_t length) ++{ ++ dwc_otg_urb->iso_descs[desc_num].offset = offset; ++ dwc_otg_urb->iso_descs[desc_num].length = length; ++} ++ ++uint32_t dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_hcd_urb_t * dwc_otg_urb, ++ int desc_num) ++{ ++ return dwc_otg_urb->iso_descs[desc_num].status; ++} ++ ++uint32_t dwc_otg_hcd_urb_get_iso_desc_actual_length(dwc_otg_hcd_urb_t * ++ dwc_otg_urb, int desc_num) ++{ ++ return dwc_otg_urb->iso_descs[desc_num].actual_length; ++} ++ ++int dwc_otg_hcd_is_bandwidth_allocated(dwc_otg_hcd_t * hcd, void *ep_handle) ++{ ++ int allocated = 0; ++ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; ++ ++ if (qh) { ++ if (!DWC_LIST_EMPTY(&qh->qh_list_entry)) { ++ allocated = 1; ++ } ++ } ++ return allocated; ++} ++ ++int dwc_otg_hcd_is_bandwidth_freed(dwc_otg_hcd_t * hcd, void *ep_handle) ++{ ++ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; ++ int freed = 0; ++ DWC_ASSERT(qh, "qh is not allocated\n"); ++ ++ if (DWC_LIST_EMPTY(&qh->qh_list_entry)) { ++ freed = 1; ++ } ++ ++ return freed; ++} ++ ++uint8_t dwc_otg_hcd_get_ep_bandwidth(dwc_otg_hcd_t * hcd, void *ep_handle) ++{ ++ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; ++ DWC_ASSERT(qh, "qh is not allocated\n"); ++ return qh->usecs; ++} ++ ++void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * hcd) ++{ ++#ifdef DEBUG ++ int num_channels; ++ int i; ++ gnptxsts_data_t np_tx_status; ++ hptxsts_data_t p_tx_status; ++ ++ num_channels = hcd->core_if->core_params->host_channels; ++ DWC_PRINTF("\n"); ++ DWC_PRINTF ++ ("************************************************************\n"); ++ DWC_PRINTF("HCD State:\n"); ++ DWC_PRINTF(" Num channels: %d\n", num_channels); ++ for (i = 0; i < num_channels; i++) { ++ dwc_hc_t *hc = hcd->hc_ptr_array[i]; ++ DWC_PRINTF(" Channel %d:\n", i); ++ DWC_PRINTF(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", ++ hc->dev_addr, hc->ep_num, hc->ep_is_in); ++ DWC_PRINTF(" speed: %d\n", hc->speed); ++ DWC_PRINTF(" ep_type: %d\n", hc->ep_type); ++ DWC_PRINTF(" max_packet: %d\n", hc->max_packet); ++ DWC_PRINTF(" data_pid_start: %d\n", hc->data_pid_start); ++ DWC_PRINTF(" multi_count: %d\n", hc->multi_count); ++ DWC_PRINTF(" xfer_started: %d\n", hc->xfer_started); ++ DWC_PRINTF(" xfer_buff: %p\n", hc->xfer_buff); ++ DWC_PRINTF(" xfer_len: %d\n", hc->xfer_len); ++ DWC_PRINTF(" xfer_count: %d\n", hc->xfer_count); ++ DWC_PRINTF(" halt_on_queue: %d\n", hc->halt_on_queue); ++ DWC_PRINTF(" halt_pending: %d\n", hc->halt_pending); ++ DWC_PRINTF(" halt_status: %d\n", hc->halt_status); ++ DWC_PRINTF(" do_split: %d\n", hc->do_split); ++ DWC_PRINTF(" complete_split: %d\n", hc->complete_split); ++ DWC_PRINTF(" hub_addr: %d\n", hc->hub_addr); ++ DWC_PRINTF(" port_addr: %d\n", hc->port_addr); ++ DWC_PRINTF(" xact_pos: %d\n", hc->xact_pos); ++ DWC_PRINTF(" requests: %d\n", hc->requests); ++ DWC_PRINTF(" qh: %p\n", hc->qh); ++ if (hc->xfer_started) { ++ hfnum_data_t hfnum; ++ hcchar_data_t hcchar; ++ hctsiz_data_t hctsiz; ++ hcint_data_t hcint; ++ hcintmsk_data_t hcintmsk; ++ hfnum.d32 = ++ DWC_READ_REG32(&hcd->core_if-> ++ host_if->host_global_regs->hfnum); ++ hcchar.d32 = ++ DWC_READ_REG32(&hcd->core_if->host_if-> ++ hc_regs[i]->hcchar); ++ hctsiz.d32 = ++ DWC_READ_REG32(&hcd->core_if->host_if-> ++ hc_regs[i]->hctsiz); ++ hcint.d32 = ++ DWC_READ_REG32(&hcd->core_if->host_if-> ++ hc_regs[i]->hcint); ++ hcintmsk.d32 = ++ DWC_READ_REG32(&hcd->core_if->host_if-> ++ hc_regs[i]->hcintmsk); ++ DWC_PRINTF(" hfnum: 0x%08x\n", hfnum.d32); ++ DWC_PRINTF(" hcchar: 0x%08x\n", hcchar.d32); ++ DWC_PRINTF(" hctsiz: 0x%08x\n", hctsiz.d32); ++ DWC_PRINTF(" hcint: 0x%08x\n", hcint.d32); ++ DWC_PRINTF(" hcintmsk: 0x%08x\n", hcintmsk.d32); ++ } ++ if (hc->xfer_started && hc->qh) { ++ dwc_otg_qtd_t *qtd; ++ dwc_otg_hcd_urb_t *urb; ++ ++ DWC_CIRCLEQ_FOREACH(qtd, &hc->qh->qtd_list, qtd_list_entry) { ++ if (!qtd->in_process) ++ break; ++ ++ urb = qtd->urb; ++ DWC_PRINTF(" URB Info:\n"); ++ DWC_PRINTF(" qtd: %p, urb: %p\n", qtd, urb); ++ if (urb) { ++ DWC_PRINTF(" Dev: %d, EP: %d %s\n", ++ dwc_otg_hcd_get_dev_addr(&urb-> ++ pipe_info), ++ dwc_otg_hcd_get_ep_num(&urb-> ++ pipe_info), ++ dwc_otg_hcd_is_pipe_in(&urb-> ++ pipe_info) ? ++ "IN" : "OUT"); ++ DWC_PRINTF(" Max packet size: %d\n", ++ dwc_otg_hcd_get_mps(&urb-> ++ pipe_info)); ++ DWC_PRINTF(" transfer_buffer: %p\n", ++ urb->buf); ++ DWC_PRINTF(" transfer_dma: %p\n", ++ (void *)urb->dma); ++ DWC_PRINTF(" transfer_buffer_length: %d\n", ++ urb->length); ++ DWC_PRINTF(" actual_length: %d\n", ++ urb->actual_length); ++ } ++ } ++ } ++ } ++ DWC_PRINTF(" non_periodic_channels: %d\n", hcd->non_periodic_channels); ++ DWC_PRINTF(" periodic_channels: %d\n", hcd->periodic_channels); ++ DWC_PRINTF(" periodic_usecs: %d\n", hcd->periodic_usecs); ++ np_tx_status.d32 = ++ DWC_READ_REG32(&hcd->core_if->core_global_regs->gnptxsts); ++ DWC_PRINTF(" NP Tx Req Queue Space Avail: %d\n", ++ np_tx_status.b.nptxqspcavail); ++ DWC_PRINTF(" NP Tx FIFO Space Avail: %d\n", ++ np_tx_status.b.nptxfspcavail); ++ p_tx_status.d32 = ++ DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hptxsts); ++ DWC_PRINTF(" P Tx Req Queue Space Avail: %d\n", ++ p_tx_status.b.ptxqspcavail); ++ DWC_PRINTF(" P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail); ++ dwc_otg_hcd_dump_frrem(hcd); ++ dwc_otg_dump_global_registers(hcd->core_if); ++ dwc_otg_dump_host_registers(hcd->core_if); ++ DWC_PRINTF ++ ("************************************************************\n"); ++ DWC_PRINTF("\n"); ++#endif ++} ++ ++#ifdef DEBUG ++void dwc_print_setup_data(uint8_t * setup) ++{ ++ int i; ++ if (CHK_DEBUG_LEVEL(DBG_HCD)) { ++ DWC_PRINTF("Setup Data = MSB "); ++ for (i = 7; i >= 0; i--) ++ DWC_PRINTF("%02x ", setup[i]); ++ DWC_PRINTF("\n"); ++ DWC_PRINTF(" bmRequestType Tranfer = %s\n", ++ (setup[0] & 0x80) ? "Device-to-Host" : ++ "Host-to-Device"); ++ DWC_PRINTF(" bmRequestType Type = "); ++ switch ((setup[0] & 0x60) >> 5) { ++ case 0: ++ DWC_PRINTF("Standard\n"); ++ break; ++ case 1: ++ DWC_PRINTF("Class\n"); ++ break; ++ case 2: ++ DWC_PRINTF("Vendor\n"); ++ break; ++ case 3: ++ DWC_PRINTF("Reserved\n"); ++ break; ++ } ++ DWC_PRINTF(" bmRequestType Recipient = "); ++ switch (setup[0] & 0x1f) { ++ case 0: ++ DWC_PRINTF("Device\n"); ++ break; ++ case 1: ++ DWC_PRINTF("Interface\n"); ++ break; ++ case 2: ++ DWC_PRINTF("Endpoint\n"); ++ break; ++ case 3: ++ DWC_PRINTF("Other\n"); ++ break; ++ default: ++ DWC_PRINTF("Reserved\n"); ++ break; ++ } ++ DWC_PRINTF(" bRequest = 0x%0x\n", setup[1]); ++ DWC_PRINTF(" wValue = 0x%0x\n", *((uint16_t *) & setup[2])); ++ DWC_PRINTF(" wIndex = 0x%0x\n", *((uint16_t *) & setup[4])); ++ DWC_PRINTF(" wLength = 0x%0x\n\n", *((uint16_t *) & setup[6])); ++ } ++} ++#endif ++ ++void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * hcd) ++{ ++#if 0 ++ DWC_PRINTF("Frame remaining at SOF:\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->frrem_samples, hcd->frrem_accum, ++ (hcd->frrem_samples > 0) ? ++ hcd->frrem_accum / hcd->frrem_samples : 0); ++ ++ DWC_PRINTF("\n"); ++ DWC_PRINTF("Frame remaining at start_transfer (uframe 7):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->core_if->hfnum_7_samples, ++ hcd->core_if->hfnum_7_frrem_accum, ++ (hcd->core_if->hfnum_7_samples > ++ 0) ? hcd->core_if->hfnum_7_frrem_accum / ++ hcd->core_if->hfnum_7_samples : 0); ++ DWC_PRINTF("Frame remaining at start_transfer (uframe 0):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->core_if->hfnum_0_samples, ++ hcd->core_if->hfnum_0_frrem_accum, ++ (hcd->core_if->hfnum_0_samples > ++ 0) ? hcd->core_if->hfnum_0_frrem_accum / ++ hcd->core_if->hfnum_0_samples : 0); ++ DWC_PRINTF("Frame remaining at start_transfer (uframe 1-6):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->core_if->hfnum_other_samples, ++ hcd->core_if->hfnum_other_frrem_accum, ++ (hcd->core_if->hfnum_other_samples > ++ 0) ? hcd->core_if->hfnum_other_frrem_accum / ++ hcd->core_if->hfnum_other_samples : 0); ++ ++ DWC_PRINTF("\n"); ++ DWC_PRINTF("Frame remaining at sample point A (uframe 7):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_7_samples_a, hcd->hfnum_7_frrem_accum_a, ++ (hcd->hfnum_7_samples_a > 0) ? ++ hcd->hfnum_7_frrem_accum_a / hcd->hfnum_7_samples_a : 0); ++ DWC_PRINTF("Frame remaining at sample point A (uframe 0):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_0_samples_a, hcd->hfnum_0_frrem_accum_a, ++ (hcd->hfnum_0_samples_a > 0) ? ++ hcd->hfnum_0_frrem_accum_a / hcd->hfnum_0_samples_a : 0); ++ DWC_PRINTF("Frame remaining at sample point A (uframe 1-6):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_other_samples_a, hcd->hfnum_other_frrem_accum_a, ++ (hcd->hfnum_other_samples_a > 0) ? ++ hcd->hfnum_other_frrem_accum_a / ++ hcd->hfnum_other_samples_a : 0); ++ ++ DWC_PRINTF("\n"); ++ DWC_PRINTF("Frame remaining at sample point B (uframe 7):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_7_samples_b, hcd->hfnum_7_frrem_accum_b, ++ (hcd->hfnum_7_samples_b > 0) ? ++ hcd->hfnum_7_frrem_accum_b / hcd->hfnum_7_samples_b : 0); ++ DWC_PRINTF("Frame remaining at sample point B (uframe 0):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_0_samples_b, hcd->hfnum_0_frrem_accum_b, ++ (hcd->hfnum_0_samples_b > 0) ? ++ hcd->hfnum_0_frrem_accum_b / hcd->hfnum_0_samples_b : 0); ++ DWC_PRINTF("Frame remaining at sample point B (uframe 1-6):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_other_samples_b, hcd->hfnum_other_frrem_accum_b, ++ (hcd->hfnum_other_samples_b > 0) ? ++ hcd->hfnum_other_frrem_accum_b / ++ hcd->hfnum_other_samples_b : 0); ++#endif ++} ++ ++#endif /* DWC_DEVICE_ONLY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.h +@@ -0,0 +1,824 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.h $ ++ * $Revision: #58 $ ++ * $Date: 2011/09/15 $ ++ * $Change: 1846647 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++#ifndef __DWC_HCD_H__ ++#define __DWC_HCD_H__ ++ ++#include "dwc_otg_os_dep.h" ++#include "usb.h" ++#include "dwc_otg_hcd_if.h" ++#include "dwc_otg_core_if.h" ++#include "dwc_list.h" ++#include "dwc_otg_cil.h" ++ ++/** ++ * @file ++ * ++ * This file contains the structures, constants, and interfaces for ++ * the Host Contoller Driver (HCD). ++ * ++ * The Host Controller Driver (HCD) is responsible for translating requests ++ * from the USB Driver into the appropriate actions on the DWC_otg controller. ++ * It isolates the USBD from the specifics of the controller by providing an ++ * API to the USBD. ++ */ ++ ++struct dwc_otg_hcd_pipe_info { ++ uint8_t dev_addr; ++ uint8_t ep_num; ++ uint8_t pipe_type; ++ uint8_t pipe_dir; ++ uint16_t mps; ++}; ++ ++struct dwc_otg_hcd_iso_packet_desc { ++ uint32_t offset; ++ uint32_t length; ++ uint32_t actual_length; ++ uint32_t status; ++}; ++ ++struct dwc_otg_qtd; ++ ++struct dwc_otg_hcd_urb { ++ void *priv; ++ struct dwc_otg_qtd *qtd; ++ void *buf; ++ dwc_dma_t dma; ++ void *setup_packet; ++ dwc_dma_t setup_dma; ++ uint32_t length; ++ uint32_t actual_length; ++ uint32_t status; ++ uint32_t error_count; ++ uint32_t packet_count; ++ uint32_t flags; ++ uint16_t interval; ++ struct dwc_otg_hcd_pipe_info pipe_info; ++ struct dwc_otg_hcd_iso_packet_desc iso_descs[0]; ++}; ++ ++static inline uint8_t dwc_otg_hcd_get_ep_num(struct dwc_otg_hcd_pipe_info *pipe) ++{ ++ return pipe->ep_num; ++} ++ ++static inline uint8_t dwc_otg_hcd_get_pipe_type(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return pipe->pipe_type; ++} ++ ++static inline uint16_t dwc_otg_hcd_get_mps(struct dwc_otg_hcd_pipe_info *pipe) ++{ ++ return pipe->mps; ++} ++ ++static inline uint8_t dwc_otg_hcd_get_dev_addr(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return pipe->dev_addr; ++} ++ ++static inline uint8_t dwc_otg_hcd_is_pipe_isoc(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return (pipe->pipe_type == UE_ISOCHRONOUS); ++} ++ ++static inline uint8_t dwc_otg_hcd_is_pipe_int(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return (pipe->pipe_type == UE_INTERRUPT); ++} ++ ++static inline uint8_t dwc_otg_hcd_is_pipe_bulk(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return (pipe->pipe_type == UE_BULK); ++} ++ ++static inline uint8_t dwc_otg_hcd_is_pipe_control(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return (pipe->pipe_type == UE_CONTROL); ++} ++ ++static inline uint8_t dwc_otg_hcd_is_pipe_in(struct dwc_otg_hcd_pipe_info *pipe) ++{ ++ return (pipe->pipe_dir == UE_DIR_IN); ++} ++ ++static inline uint8_t dwc_otg_hcd_is_pipe_out(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return (!dwc_otg_hcd_is_pipe_in(pipe)); ++} ++ ++static inline void dwc_otg_hcd_fill_pipe(struct dwc_otg_hcd_pipe_info *pipe, ++ uint8_t devaddr, uint8_t ep_num, ++ uint8_t pipe_type, uint8_t pipe_dir, ++ uint16_t mps) ++{ ++ pipe->dev_addr = devaddr; ++ pipe->ep_num = ep_num; ++ pipe->pipe_type = pipe_type; ++ pipe->pipe_dir = pipe_dir; ++ pipe->mps = mps; ++} ++ ++/** ++ * Phases for control transfers. ++ */ ++typedef enum dwc_otg_control_phase { ++ DWC_OTG_CONTROL_SETUP, ++ DWC_OTG_CONTROL_DATA, ++ DWC_OTG_CONTROL_STATUS ++} dwc_otg_control_phase_e; ++ ++/** Transaction types. */ ++typedef enum dwc_otg_transaction_type { ++ DWC_OTG_TRANSACTION_NONE, ++ DWC_OTG_TRANSACTION_PERIODIC, ++ DWC_OTG_TRANSACTION_NON_PERIODIC, ++ DWC_OTG_TRANSACTION_ALL ++} dwc_otg_transaction_type_e; ++ ++struct dwc_otg_qh; ++ ++/** ++ * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control, ++ * interrupt, or isochronous transfer. A single QTD is created for each URB ++ * (of one of these types) submitted to the HCD. The transfer associated with ++ * a QTD may require one or multiple transactions. ++ * ++ * A QTD is linked to a Queue Head, which is entered in either the ++ * non-periodic or periodic schedule for execution. When a QTD is chosen for ++ * execution, some or all of its transactions may be executed. After ++ * execution, the state of the QTD is updated. The QTD may be retired if all ++ * its transactions are complete or if an error occurred. Otherwise, it ++ * remains in the schedule so more transactions can be executed later. ++ */ ++typedef struct dwc_otg_qtd { ++ /** ++ * Determines the PID of the next data packet for the data phase of ++ * control transfers. Ignored for other transfer types.<br> ++ * One of the following values: ++ * - DWC_OTG_HC_PID_DATA0 ++ * - DWC_OTG_HC_PID_DATA1 ++ */ ++ uint8_t data_toggle; ++ ++ /** Current phase for control transfers (Setup, Data, or Status). */ ++ dwc_otg_control_phase_e control_phase; ++ ++ /** Keep track of the current split type ++ * for FS/LS endpoints on a HS Hub */ ++ uint8_t complete_split; ++ ++ /** How many bytes transferred during SSPLIT OUT */ ++ uint32_t ssplit_out_xfer_count; ++ ++ /** ++ * Holds the number of bus errors that have occurred for a transaction ++ * within this transfer. ++ */ ++ uint8_t error_count; ++ ++ /** ++ * Index of the next frame descriptor for an isochronous transfer. A ++ * frame descriptor describes the buffer position and length of the ++ * data to be transferred in the next scheduled (micro)frame of an ++ * isochronous transfer. It also holds status for that transaction. ++ * The frame index starts at 0. ++ */ ++ uint16_t isoc_frame_index; ++ ++ /** Position of the ISOC split on full/low speed */ ++ uint8_t isoc_split_pos; ++ ++ /** Position of the ISOC split in the buffer for the current frame */ ++ uint16_t isoc_split_offset; ++ ++ /** URB for this transfer */ ++ struct dwc_otg_hcd_urb *urb; ++ ++ struct dwc_otg_qh *qh; ++ ++ /** This list of QTDs */ ++ DWC_CIRCLEQ_ENTRY(dwc_otg_qtd) qtd_list_entry; ++ ++ /** Indicates if this QTD is currently processed by HW. */ ++ uint8_t in_process; ++ ++ /** Number of DMA descriptors for this QTD */ ++ uint8_t n_desc; ++ ++ /** ++ * Last activated frame(packet) index. ++ * Used in Descriptor DMA mode only. ++ */ ++ uint16_t isoc_frame_index_last; ++ ++} dwc_otg_qtd_t; ++ ++DWC_CIRCLEQ_HEAD(dwc_otg_qtd_list, dwc_otg_qtd); ++ ++/** ++ * A Queue Head (QH) holds the static characteristics of an endpoint and ++ * maintains a list of transfers (QTDs) for that endpoint. A QH structure may ++ * be entered in either the non-periodic or periodic schedule. ++ */ ++typedef struct dwc_otg_qh { ++ /** ++ * Endpoint type. ++ * One of the following values: ++ * - UE_CONTROL ++ * - UE_BULK ++ * - UE_INTERRUPT ++ * - UE_ISOCHRONOUS ++ */ ++ uint8_t ep_type; ++ uint8_t ep_is_in; ++ ++ /** wMaxPacketSize Field of Endpoint Descriptor. */ ++ uint16_t maxp; ++ ++ /** ++ * Device speed. ++ * One of the following values: ++ * - DWC_OTG_EP_SPEED_LOW ++ * - DWC_OTG_EP_SPEED_FULL ++ * - DWC_OTG_EP_SPEED_HIGH ++ */ ++ uint8_t dev_speed; ++ ++ /** ++ * Determines the PID of the next data packet for non-control ++ * transfers. Ignored for control transfers.<br> ++ * One of the following values: ++ * - DWC_OTG_HC_PID_DATA0 ++ * - DWC_OTG_HC_PID_DATA1 ++ */ ++ uint8_t data_toggle; ++ ++ /** Ping state if 1. */ ++ uint8_t ping_state; ++ ++ /** ++ * List of QTDs for this QH. ++ */ ++ struct dwc_otg_qtd_list qtd_list; ++ ++ /** Host channel currently processing transfers for this QH. */ ++ struct dwc_hc *channel; ++ ++ /** Full/low speed endpoint on high-speed hub requires split. */ ++ uint8_t do_split; ++ ++ /** @name Periodic schedule information */ ++ /** @{ */ ++ ++ /** Bandwidth in microseconds per (micro)frame. */ ++ uint16_t usecs; ++ ++ /** Interval between transfers in (micro)frames. */ ++ uint16_t interval; ++ ++ /** ++ * (micro)frame to initialize a periodic transfer. The transfer ++ * executes in the following (micro)frame. ++ */ ++ uint16_t sched_frame; ++ ++ /** (micro)frame at which last start split was initialized. */ ++ uint16_t start_split_frame; ++ ++ /** @} */ ++ ++ /** ++ * Used instead of original buffer if ++ * it(physical address) is not dword-aligned. ++ */ ++ uint8_t *dw_align_buf; ++ dwc_dma_t dw_align_buf_dma; ++ ++ /** Entry for QH in either the periodic or non-periodic schedule. */ ++ dwc_list_link_t qh_list_entry; ++ ++ /** @name Descriptor DMA support */ ++ /** @{ */ ++ ++ /** Descriptor List. */ ++ dwc_otg_host_dma_desc_t *desc_list; ++ ++ /** Descriptor List physical address. */ ++ dwc_dma_t desc_list_dma; ++ ++ /** ++ * Xfer Bytes array. ++ * Each element corresponds to a descriptor and indicates ++ * original XferSize size value for the descriptor. ++ */ ++ uint32_t *n_bytes; ++ ++ /** Actual number of transfer descriptors in a list. */ ++ uint16_t ntd; ++ ++ /** First activated isochronous transfer descriptor index. */ ++ uint8_t td_first; ++ /** Last activated isochronous transfer descriptor index. */ ++ uint8_t td_last; ++ ++ /** @} */ ++ ++ ++ uint16_t speed; ++ uint16_t frame_usecs[8]; ++} dwc_otg_qh_t; ++ ++DWC_CIRCLEQ_HEAD(hc_list, dwc_hc); ++ ++/** ++ * This structure holds the state of the HCD, including the non-periodic and ++ * periodic schedules. ++ */ ++struct dwc_otg_hcd { ++ /** The DWC otg device pointer */ ++ struct dwc_otg_device *otg_dev; ++ /** DWC OTG Core Interface Layer */ ++ dwc_otg_core_if_t *core_if; ++ ++ /** Function HCD driver callbacks */ ++ struct dwc_otg_hcd_function_ops *fops; ++ ++ /** Internal DWC HCD Flags */ ++ volatile union dwc_otg_hcd_internal_flags { ++ uint32_t d32; ++ struct { ++ unsigned port_connect_status_change:1; ++ unsigned port_connect_status:1; ++ unsigned port_reset_change:1; ++ unsigned port_enable_change:1; ++ unsigned port_suspend_change:1; ++ unsigned port_over_current_change:1; ++ unsigned port_l1_change:1; ++ unsigned reserved:26; ++ } b; ++ } flags; ++ ++ /** ++ * Inactive items in the non-periodic schedule. This is a list of ++ * Queue Heads. Transfers associated with these Queue Heads are not ++ * currently assigned to a host channel. ++ */ ++ dwc_list_link_t non_periodic_sched_inactive; ++ ++ /** ++ * Active items in the non-periodic schedule. This is a list of ++ * Queue Heads. Transfers associated with these Queue Heads are ++ * currently assigned to a host channel. ++ */ ++ dwc_list_link_t non_periodic_sched_active; ++ ++ /** ++ * Pointer to the next Queue Head to process in the active ++ * non-periodic schedule. ++ */ ++ dwc_list_link_t *non_periodic_qh_ptr; ++ ++ /** ++ * Inactive items in the periodic schedule. This is a list of QHs for ++ * periodic transfers that are _not_ scheduled for the next frame. ++ * Each QH in the list has an interval counter that determines when it ++ * needs to be scheduled for execution. This scheduling mechanism ++ * allows only a simple calculation for periodic bandwidth used (i.e. ++ * must assume that all periodic transfers may need to execute in the ++ * same frame). However, it greatly simplifies scheduling and should ++ * be sufficient for the vast majority of OTG hosts, which need to ++ * connect to a small number of peripherals at one time. ++ * ++ * Items move from this list to periodic_sched_ready when the QH ++ * interval counter is 0 at SOF. ++ */ ++ dwc_list_link_t periodic_sched_inactive; ++ ++ /** ++ * List of periodic QHs that are ready for execution in the next ++ * frame, but have not yet been assigned to host channels. ++ * ++ * Items move from this list to periodic_sched_assigned as host ++ * channels become available during the current frame. ++ */ ++ dwc_list_link_t periodic_sched_ready; ++ ++ /** ++ * List of periodic QHs to be executed in the next frame that are ++ * assigned to host channels. ++ * ++ * Items move from this list to periodic_sched_queued as the ++ * transactions for the QH are queued to the DWC_otg controller. ++ */ ++ dwc_list_link_t periodic_sched_assigned; ++ ++ /** ++ * List of periodic QHs that have been queued for execution. ++ * ++ * Items move from this list to either periodic_sched_inactive or ++ * periodic_sched_ready when the channel associated with the transfer ++ * is released. If the interval for the QH is 1, the item moves to ++ * periodic_sched_ready because it must be rescheduled for the next ++ * frame. Otherwise, the item moves to periodic_sched_inactive. ++ */ ++ dwc_list_link_t periodic_sched_queued; ++ ++ /** ++ * Total bandwidth claimed so far for periodic transfers. This value ++ * is in microseconds per (micro)frame. The assumption is that all ++ * periodic transfers may occur in the same (micro)frame. ++ */ ++ uint16_t periodic_usecs; ++ ++ /** ++ * Total bandwidth claimed so far for all periodic transfers ++ * in a frame. ++ * This will include a mixture of HS and FS transfers. ++ * Units are microseconds per (micro)frame. ++ * We have a budget per frame and have to schedule ++ * transactions accordingly. ++ * Watch out for the fact that things are actually scheduled for the ++ * "next frame". ++ */ ++ uint16_t frame_usecs[8]; ++ ++ ++ /** ++ * Frame number read from the core at SOF. The value ranges from 0 to ++ * DWC_HFNUM_MAX_FRNUM. ++ */ ++ uint16_t frame_number; ++ ++ /** ++ * Count of periodic QHs, if using several eps. For SOF enable/disable. ++ */ ++ uint16_t periodic_qh_count; ++ ++ /** ++ * Free host channels in the controller. This is a list of ++ * dwc_hc_t items. ++ */ ++ struct hc_list free_hc_list; ++ /** ++ * Number of host channels assigned to periodic transfers. Currently ++ * assuming that there is a dedicated host channel for each periodic ++ * transaction and at least one host channel available for ++ * non-periodic transactions. ++ */ ++ int periodic_channels; /* microframe_schedule==0 */ ++ ++ /** ++ * Number of host channels assigned to non-periodic transfers. ++ */ ++ int non_periodic_channels; /* microframe_schedule==0 */ ++ ++ /** ++ * Number of host channels assigned to non-periodic transfers. ++ */ ++ int available_host_channels; ++ ++ /** ++ * Array of pointers to the host channel descriptors. Allows accessing ++ * a host channel descriptor given the host channel number. This is ++ * useful in interrupt handlers. ++ */ ++ struct dwc_hc *hc_ptr_array[MAX_EPS_CHANNELS]; ++ ++ /** ++ * Buffer to use for any data received during the status phase of a ++ * control transfer. Normally no data is transferred during the status ++ * phase. This buffer is used as a bit bucket. ++ */ ++ uint8_t *status_buf; ++ ++ /** ++ * DMA address for status_buf. ++ */ ++ dma_addr_t status_buf_dma; ++#define DWC_OTG_HCD_STATUS_BUF_SIZE 64 ++ ++ /** ++ * Connection timer. An OTG host must display a message if the device ++ * does not connect. Started when the VBus power is turned on via ++ * sysfs attribute "buspower". ++ */ ++ dwc_timer_t *conn_timer; ++ ++ /* Tasket to do a reset */ ++ dwc_tasklet_t *reset_tasklet; ++ ++ /* */ ++ dwc_spinlock_t *lock; ++ ++ /** ++ * Private data that could be used by OS wrapper. ++ */ ++ void *priv; ++ ++ uint8_t otg_port; ++ ++ /** Frame List */ ++ uint32_t *frame_list; ++ ++ /** Frame List DMA address */ ++ dma_addr_t frame_list_dma; ++ ++#ifdef DEBUG ++ uint32_t frrem_samples; ++ uint64_t frrem_accum; ++ ++ uint32_t hfnum_7_samples_a; ++ uint64_t hfnum_7_frrem_accum_a; ++ uint32_t hfnum_0_samples_a; ++ uint64_t hfnum_0_frrem_accum_a; ++ uint32_t hfnum_other_samples_a; ++ uint64_t hfnum_other_frrem_accum_a; ++ ++ uint32_t hfnum_7_samples_b; ++ uint64_t hfnum_7_frrem_accum_b; ++ uint32_t hfnum_0_samples_b; ++ uint64_t hfnum_0_frrem_accum_b; ++ uint32_t hfnum_other_samples_b; ++ uint64_t hfnum_other_frrem_accum_b; ++#endif ++}; ++ ++/** @name Transaction Execution Functions */ ++/** @{ */ ++extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t ++ * hcd); ++extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * hcd, ++ dwc_otg_transaction_type_e tr_type); ++ ++/** @} */ ++ ++/** @name Interrupt Handler Functions */ ++/** @{ */ ++extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t * ++ dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t * ++ dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t * ++ dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t * ++ dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr(dwc_otg_hcd_t * ++ dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_disconnect_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * dwc_otg_hcd, ++ uint32_t num); ++extern int32_t dwc_otg_hcd_handle_session_req_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr(dwc_otg_hcd_t * ++ dwc_otg_hcd); ++/** @} */ ++ ++/** @name Schedule Queue Functions */ ++/** @{ */ ++ ++/* Implemented in dwc_otg_hcd_queue.c */ ++extern dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t * hcd, ++ dwc_otg_hcd_urb_t * urb, int atomic_alloc); ++extern void dwc_otg_hcd_qh_free(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); ++extern int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); ++extern void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); ++extern void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, ++ int sched_csplit); ++ ++/** Remove and free a QH */ ++static inline void dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd_t * hcd, ++ dwc_otg_qh_t * qh) ++{ ++ dwc_irqflags_t flags; ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ dwc_otg_hcd_qh_free(hcd, qh); ++} ++ ++/** Allocates memory for a QH structure. ++ * @return Returns the memory allocate or NULL on error. */ ++static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc(int atomic_alloc) ++{ ++ if (atomic_alloc) ++ return (dwc_otg_qh_t *) DWC_ALLOC_ATOMIC(sizeof(dwc_otg_qh_t)); ++ else ++ return (dwc_otg_qh_t *) DWC_ALLOC(sizeof(dwc_otg_qh_t)); ++} ++ ++extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(dwc_otg_hcd_urb_t * urb, ++ int atomic_alloc); ++extern void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t * qtd, dwc_otg_hcd_urb_t * urb); ++extern int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * qtd, dwc_otg_hcd_t * dwc_otg_hcd, ++ dwc_otg_qh_t ** qh, int atomic_alloc); ++ ++/** Allocates memory for a QTD structure. ++ * @return Returns the memory allocate or NULL on error. */ ++static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc(int atomic_alloc) ++{ ++ if (atomic_alloc) ++ return (dwc_otg_qtd_t *) DWC_ALLOC_ATOMIC(sizeof(dwc_otg_qtd_t)); ++ else ++ return (dwc_otg_qtd_t *) DWC_ALLOC(sizeof(dwc_otg_qtd_t)); ++} ++ ++/** Frees the memory for a QTD structure. QTD should already be removed from ++ * list. ++ * @param qtd QTD to free.*/ ++static inline void dwc_otg_hcd_qtd_free(dwc_otg_qtd_t * qtd) ++{ ++ DWC_FREE(qtd); ++} ++ ++/** Removes a QTD from list. ++ * @param hcd HCD instance. ++ * @param qtd QTD to remove from list. ++ * @param qh QTD belongs to. ++ */ ++static inline void dwc_otg_hcd_qtd_remove(dwc_otg_hcd_t * hcd, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_qh_t * qh) ++{ ++ DWC_CIRCLEQ_REMOVE(&qh->qtd_list, qtd, qtd_list_entry); ++} ++ ++/** Remove and free a QTD ++ * Need to disable IRQ and hold hcd lock while calling this function out of ++ * interrupt servicing chain */ ++static inline void dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd_t * hcd, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_qh_t * qh) ++{ ++ dwc_otg_hcd_qtd_remove(hcd, qtd, qh); ++ dwc_otg_hcd_qtd_free(qtd); ++} ++ ++/** @} */ ++ ++/** @name Descriptor DMA Supporting Functions */ ++/** @{ */ ++ ++extern void dwc_otg_hcd_start_xfer_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); ++extern void dwc_otg_hcd_complete_xfer_ddma(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_halt_status_e halt_status); ++ ++extern int dwc_otg_hcd_qh_init_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); ++extern void dwc_otg_hcd_qh_free_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); ++ ++/** @} */ ++ ++/** @name Internal Functions */ ++/** @{ */ ++dwc_otg_qh_t *dwc_urb_to_qh(dwc_otg_hcd_urb_t * urb); ++/** @} */ ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++extern int dwc_otg_hcd_get_hc_for_lpm_tran(dwc_otg_hcd_t * hcd, ++ uint8_t devaddr); ++extern void dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd_t * hcd); ++#endif ++ ++/** Gets the QH that contains the list_head */ ++#define dwc_list_to_qh(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qh_t, qh_list_entry) ++ ++/** Gets the QTD that contains the list_head */ ++#define dwc_list_to_qtd(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qtd_t, qtd_list_entry) ++ ++/** Check if QH is non-periodic */ ++#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == UE_BULK) || \ ++ (_qh_ptr_->ep_type == UE_CONTROL)) ++ ++/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */ ++#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) ++ ++/** Packet size for any kind of endpoint descriptor */ ++#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff) ++ ++/** ++ * Returns true if _frame1 is less than or equal to _frame2. The comparison is ++ * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the ++ * frame number when the max frame number is reached. ++ */ ++static inline int dwc_frame_num_le(uint16_t frame1, uint16_t frame2) ++{ ++ return ((frame2 - frame1) & DWC_HFNUM_MAX_FRNUM) <= ++ (DWC_HFNUM_MAX_FRNUM >> 1); ++} ++ ++/** ++ * Returns true if _frame1 is greater than _frame2. The comparison is done ++ * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame ++ * number when the max frame number is reached. ++ */ ++static inline int dwc_frame_num_gt(uint16_t frame1, uint16_t frame2) ++{ ++ return (frame1 != frame2) && ++ (((frame1 - frame2) & DWC_HFNUM_MAX_FRNUM) < ++ (DWC_HFNUM_MAX_FRNUM >> 1)); ++} ++ ++/** ++ * Increments _frame by the amount specified by _inc. The addition is done ++ * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value. ++ */ ++static inline uint16_t dwc_frame_num_inc(uint16_t frame, uint16_t inc) ++{ ++ return (frame + inc) & DWC_HFNUM_MAX_FRNUM; ++} ++ ++static inline uint16_t dwc_full_frame_num(uint16_t frame) ++{ ++ return (frame & DWC_HFNUM_MAX_FRNUM) >> 3; ++} ++ ++static inline uint16_t dwc_micro_frame_num(uint16_t frame) ++{ ++ return frame & 0x7; ++} ++ ++void dwc_otg_hcd_save_data_toggle(dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd); ++ ++#ifdef DEBUG ++/** ++ * Macro to sample the remaining PHY clocks left in the current frame. This ++ * may be used during debugging to determine the average time it takes to ++ * execute sections of code. There are two possible sample points, "a" and ++ * "b", so the _letter argument must be one of these values. ++ * ++ * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For ++ * example, "cat /sys/devices/lm0/hcd_frrem". ++ */ ++#define dwc_sample_frrem(_hcd, _qh, _letter) \ ++{ \ ++ hfnum_data_t hfnum; \ ++ dwc_otg_qtd_t *qtd; \ ++ qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \ ++ if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \ ++ hfnum.d32 = DWC_READ_REG32(&_hcd->core_if->host_if->host_global_regs->hfnum); \ ++ switch (hfnum.b.frnum & 0x7) { \ ++ case 7: \ ++ _hcd->hfnum_7_samples_##_letter++; \ ++ _hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \ ++ break; \ ++ case 0: \ ++ _hcd->hfnum_0_samples_##_letter++; \ ++ _hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \ ++ break; \ ++ default: \ ++ _hcd->hfnum_other_samples_##_letter++; \ ++ _hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \ ++ break; \ ++ } \ ++ } \ ++} ++#else ++#define dwc_sample_frrem(_hcd, _qh, _letter) ++#endif ++#endif ++#endif /* DWC_DEVICE_ONLY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c +@@ -0,0 +1,1133 @@ ++/*========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_ddma.c $ ++ * $Revision: #10 $ ++ * $Date: 2011/10/20 $ ++ * $Change: 1869464 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++ ++/** @file ++ * This file contains Descriptor DMA support implementation for host mode. ++ */ ++ ++#include "dwc_otg_hcd.h" ++#include "dwc_otg_regs.h" ++ ++extern bool microframe_schedule; ++ ++static inline uint8_t frame_list_idx(uint16_t frame) ++{ ++ return (frame & (MAX_FRLIST_EN_NUM - 1)); ++} ++ ++static inline uint16_t desclist_idx_inc(uint16_t idx, uint16_t inc, uint8_t speed) ++{ ++ return (idx + inc) & ++ (((speed == ++ DWC_OTG_EP_SPEED_HIGH) ? MAX_DMA_DESC_NUM_HS_ISOC : ++ MAX_DMA_DESC_NUM_GENERIC) - 1); ++} ++ ++static inline uint16_t desclist_idx_dec(uint16_t idx, uint16_t inc, uint8_t speed) ++{ ++ return (idx - inc) & ++ (((speed == ++ DWC_OTG_EP_SPEED_HIGH) ? MAX_DMA_DESC_NUM_HS_ISOC : ++ MAX_DMA_DESC_NUM_GENERIC) - 1); ++} ++ ++static inline uint16_t max_desc_num(dwc_otg_qh_t * qh) ++{ ++ return (((qh->ep_type == UE_ISOCHRONOUS) ++ && (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH)) ++ ? MAX_DMA_DESC_NUM_HS_ISOC : MAX_DMA_DESC_NUM_GENERIC); ++} ++static inline uint16_t frame_incr_val(dwc_otg_qh_t * qh) ++{ ++ return ((qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) ++ ? ((qh->interval + 8 - 1) / 8) ++ : qh->interval); ++} ++ ++static int desc_list_alloc(dwc_otg_qh_t * qh) ++{ ++ int retval = 0; ++ ++ qh->desc_list = (dwc_otg_host_dma_desc_t *) ++ DWC_DMA_ALLOC(sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh), ++ &qh->desc_list_dma); ++ ++ if (!qh->desc_list) { ++ retval = -DWC_E_NO_MEMORY; ++ DWC_ERROR("%s: DMA descriptor list allocation failed\n", __func__); ++ ++ } ++ ++ dwc_memset(qh->desc_list, 0x00, ++ sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh)); ++ ++ qh->n_bytes = ++ (uint32_t *) DWC_ALLOC(sizeof(uint32_t) * max_desc_num(qh)); ++ ++ if (!qh->n_bytes) { ++ retval = -DWC_E_NO_MEMORY; ++ DWC_ERROR ++ ("%s: Failed to allocate array for descriptors' size actual values\n", ++ __func__); ++ ++ } ++ return retval; ++ ++} ++ ++static void desc_list_free(dwc_otg_qh_t * qh) ++{ ++ if (qh->desc_list) { ++ DWC_DMA_FREE(max_desc_num(qh), qh->desc_list, ++ qh->desc_list_dma); ++ qh->desc_list = NULL; ++ } ++ ++ if (qh->n_bytes) { ++ DWC_FREE(qh->n_bytes); ++ qh->n_bytes = NULL; ++ } ++} ++ ++static int frame_list_alloc(dwc_otg_hcd_t * hcd) ++{ ++ int retval = 0; ++ if (hcd->frame_list) ++ return 0; ++ ++ hcd->frame_list = DWC_DMA_ALLOC(4 * MAX_FRLIST_EN_NUM, ++ &hcd->frame_list_dma); ++ if (!hcd->frame_list) { ++ retval = -DWC_E_NO_MEMORY; ++ DWC_ERROR("%s: Frame List allocation failed\n", __func__); ++ } ++ ++ dwc_memset(hcd->frame_list, 0x00, 4 * MAX_FRLIST_EN_NUM); ++ ++ return retval; ++} ++ ++static void frame_list_free(dwc_otg_hcd_t * hcd) ++{ ++ if (!hcd->frame_list) ++ return; ++ ++ DWC_DMA_FREE(4 * MAX_FRLIST_EN_NUM, hcd->frame_list, hcd->frame_list_dma); ++ hcd->frame_list = NULL; ++} ++ ++static void per_sched_enable(dwc_otg_hcd_t * hcd, uint16_t fr_list_en) ++{ ++ ++ hcfg_data_t hcfg; ++ ++ hcfg.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hcfg); ++ ++ if (hcfg.b.perschedena) { ++ /* already enabled */ ++ return; ++ } ++ ++ DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hflbaddr, ++ hcd->frame_list_dma); ++ ++ switch (fr_list_en) { ++ case 64: ++ hcfg.b.frlisten = 3; ++ break; ++ case 32: ++ hcfg.b.frlisten = 2; ++ break; ++ case 16: ++ hcfg.b.frlisten = 1; ++ break; ++ case 8: ++ hcfg.b.frlisten = 0; ++ break; ++ default: ++ break; ++ } ++ ++ hcfg.b.perschedena = 1; ++ ++ DWC_DEBUGPL(DBG_HCD, "Enabling Periodic schedule\n"); ++ DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hcfg, hcfg.d32); ++ ++} ++ ++static void per_sched_disable(dwc_otg_hcd_t * hcd) ++{ ++ hcfg_data_t hcfg; ++ ++ hcfg.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hcfg); ++ ++ if (!hcfg.b.perschedena) { ++ /* already disabled */ ++ return; ++ } ++ hcfg.b.perschedena = 0; ++ ++ DWC_DEBUGPL(DBG_HCD, "Disabling Periodic schedule\n"); ++ DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hcfg, hcfg.d32); ++} ++ ++/* ++ * Activates/Deactivates FrameList entries for the channel ++ * based on endpoint servicing period. ++ */ ++void update_frame_list(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, uint8_t enable) ++{ ++ uint16_t i, j, inc; ++ dwc_hc_t *hc = NULL; ++ ++ if (!qh->channel) { ++ DWC_ERROR("qh->channel = %p", qh->channel); ++ return; ++ } ++ ++ if (!hcd) { ++ DWC_ERROR("------hcd = %p", hcd); ++ return; ++ } ++ ++ if (!hcd->frame_list) { ++ DWC_ERROR("-------hcd->frame_list = %p", hcd->frame_list); ++ return; ++ } ++ ++ hc = qh->channel; ++ inc = frame_incr_val(qh); ++ if (qh->ep_type == UE_ISOCHRONOUS) ++ i = frame_list_idx(qh->sched_frame); ++ else ++ i = 0; ++ ++ j = i; ++ do { ++ if (enable) ++ hcd->frame_list[j] |= (1 << hc->hc_num); ++ else ++ hcd->frame_list[j] &= ~(1 << hc->hc_num); ++ j = (j + inc) & (MAX_FRLIST_EN_NUM - 1); ++ } ++ while (j != i); ++ if (!enable) ++ return; ++ hc->schinfo = 0; ++ if (qh->channel->speed == DWC_OTG_EP_SPEED_HIGH) { ++ j = 1; ++ /* TODO - check this */ ++ inc = (8 + qh->interval - 1) / qh->interval; ++ for (i = 0; i < inc; i++) { ++ hc->schinfo |= j; ++ j = j << qh->interval; ++ } ++ } else { ++ hc->schinfo = 0xff; ++ } ++} ++ ++#if 1 ++void dump_frame_list(dwc_otg_hcd_t * hcd) ++{ ++ int i = 0; ++ DWC_PRINTF("--FRAME LIST (hex) --\n"); ++ for (i = 0; i < MAX_FRLIST_EN_NUM; i++) { ++ DWC_PRINTF("%x\t", hcd->frame_list[i]); ++ if (!(i % 8) && i) ++ DWC_PRINTF("\n"); ++ } ++ DWC_PRINTF("\n----\n"); ++ ++} ++#endif ++ ++static void release_channel_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ dwc_irqflags_t flags; ++ dwc_spinlock_t *channel_lock = DWC_SPINLOCK_ALLOC(); ++ ++ dwc_hc_t *hc = qh->channel; ++ if (dwc_qh_is_non_per(qh)) { ++ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); ++ if (!microframe_schedule) ++ hcd->non_periodic_channels--; ++ else ++ hcd->available_host_channels++; ++ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); ++ } else ++ update_frame_list(hcd, qh, 0); ++ ++ /* ++ * The condition is added to prevent double cleanup try in case of device ++ * disconnect. See channel cleanup in dwc_otg_hcd_disconnect_cb(). ++ */ ++ if (hc->qh) { ++ dwc_otg_hc_cleanup(hcd->core_if, hc); ++ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry); ++ hc->qh = NULL; ++ } ++ ++ qh->channel = NULL; ++ qh->ntd = 0; ++ ++ if (qh->desc_list) { ++ dwc_memset(qh->desc_list, 0x00, ++ sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh)); ++ } ++ DWC_SPINLOCK_FREE(channel_lock); ++} ++ ++/** ++ * Initializes a QH structure's Descriptor DMA related members. ++ * Allocates memory for descriptor list. ++ * On first periodic QH, allocates memory for FrameList ++ * and enables periodic scheduling. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh The QH to init. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++int dwc_otg_hcd_qh_init_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ int retval = 0; ++ ++ if (qh->do_split) { ++ DWC_ERROR("SPLIT Transfers are not supported in Descriptor DMA.\n"); ++ return -1; ++ } ++ ++ retval = desc_list_alloc(qh); ++ ++ if ((retval == 0) ++ && (qh->ep_type == UE_ISOCHRONOUS || qh->ep_type == UE_INTERRUPT)) { ++ if (!hcd->frame_list) { ++ retval = frame_list_alloc(hcd); ++ /* Enable periodic schedule on first periodic QH */ ++ if (retval == 0) ++ per_sched_enable(hcd, MAX_FRLIST_EN_NUM); ++ } ++ } ++ ++ qh->ntd = 0; ++ ++ return retval; ++} ++ ++/** ++ * Frees descriptor list memory associated with the QH. ++ * If QH is periodic and the last, frees FrameList memory ++ * and disables periodic scheduling. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh The QH to init. ++ */ ++void dwc_otg_hcd_qh_free_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ desc_list_free(qh); ++ ++ /* ++ * Channel still assigned due to some reasons. ++ * Seen on Isoc URB dequeue. Channel halted but no subsequent ++ * ChHalted interrupt to release the channel. Afterwards ++ * when it comes here from endpoint disable routine ++ * channel remains assigned. ++ */ ++ if (qh->channel) ++ release_channel_ddma(hcd, qh); ++ ++ if ((qh->ep_type == UE_ISOCHRONOUS || qh->ep_type == UE_INTERRUPT) ++ && (microframe_schedule || !hcd->periodic_channels) && hcd->frame_list) { ++ ++ per_sched_disable(hcd); ++ frame_list_free(hcd); ++ } ++} ++ ++static uint8_t frame_to_desc_idx(dwc_otg_qh_t * qh, uint16_t frame_idx) ++{ ++ if (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) { ++ /* ++ * Descriptor set(8 descriptors) index ++ * which is 8-aligned. ++ */ ++ return (frame_idx & ((MAX_DMA_DESC_NUM_HS_ISOC / 8) - 1)) * 8; ++ } else { ++ return (frame_idx & (MAX_DMA_DESC_NUM_GENERIC - 1)); ++ } ++} ++ ++/* ++ * Determine starting frame for Isochronous transfer. ++ * Few frames skipped to prevent race condition with HC. ++ */ ++static uint8_t calc_starting_frame(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, ++ uint8_t * skip_frames) ++{ ++ uint16_t frame = 0; ++ hcd->frame_number = dwc_otg_hcd_get_frame_number(hcd); ++ ++ /* sched_frame is always frame number(not uFrame) both in FS and HS !! */ ++ ++ /* ++ * skip_frames is used to limit activated descriptors number ++ * to avoid the situation when HC services the last activated ++ * descriptor firstly. ++ * Example for FS: ++ * Current frame is 1, scheduled frame is 3. Since HC always fetches the descriptor ++ * corresponding to curr_frame+1, the descriptor corresponding to frame 2 ++ * will be fetched. If the number of descriptors is max=64 (or greather) the ++ * list will be fully programmed with Active descriptors and it is possible ++ * case(rare) that the latest descriptor(considering rollback) corresponding ++ * to frame 2 will be serviced first. HS case is more probable because, in fact, ++ * up to 11 uframes(16 in the code) may be skipped. ++ */ ++ if (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) { ++ /* ++ * Consider uframe counter also, to start xfer asap. ++ * If half of the frame elapsed skip 2 frames otherwise ++ * just 1 frame. ++ * Starting descriptor index must be 8-aligned, so ++ * if the current frame is near to complete the next one ++ * is skipped as well. ++ */ ++ ++ if (dwc_micro_frame_num(hcd->frame_number) >= 5) { ++ *skip_frames = 2 * 8; ++ frame = dwc_frame_num_inc(hcd->frame_number, *skip_frames); ++ } else { ++ *skip_frames = 1 * 8; ++ frame = dwc_frame_num_inc(hcd->frame_number, *skip_frames); ++ } ++ ++ frame = dwc_full_frame_num(frame); ++ } else { ++ /* ++ * Two frames are skipped for FS - the current and the next. ++ * But for descriptor programming, 1 frame(descriptor) is enough, ++ * see example above. ++ */ ++ *skip_frames = 1; ++ frame = dwc_frame_num_inc(hcd->frame_number, 2); ++ } ++ ++ return frame; ++} ++ ++/* ++ * Calculate initial descriptor index for isochronous transfer ++ * based on scheduled frame. ++ */ ++static uint8_t recalc_initial_desc_idx(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ uint16_t frame = 0, fr_idx, fr_idx_tmp; ++ uint8_t skip_frames = 0; ++ /* ++ * With current ISOC processing algorithm the channel is being ++ * released when no more QTDs in the list(qh->ntd == 0). ++ * Thus this function is called only when qh->ntd == 0 and qh->channel == 0. ++ * ++ * So qh->channel != NULL branch is not used and just not removed from the ++ * source file. It is required for another possible approach which is, ++ * do not disable and release the channel when ISOC session completed, ++ * just move QH to inactive schedule until new QTD arrives. ++ * On new QTD, the QH moved back to 'ready' schedule, ++ * starting frame and therefore starting desc_index are recalculated. ++ * In this case channel is released only on ep_disable. ++ */ ++ ++ /* Calculate starting descriptor index. For INTERRUPT endpoint it is always 0. */ ++ if (qh->channel) { ++ frame = calc_starting_frame(hcd, qh, &skip_frames); ++ /* ++ * Calculate initial descriptor index based on FrameList current bitmap ++ * and servicing period. ++ */ ++ fr_idx_tmp = frame_list_idx(frame); ++ fr_idx = ++ (MAX_FRLIST_EN_NUM + frame_list_idx(qh->sched_frame) - ++ fr_idx_tmp) ++ % frame_incr_val(qh); ++ fr_idx = (fr_idx + fr_idx_tmp) % MAX_FRLIST_EN_NUM; ++ } else { ++ qh->sched_frame = calc_starting_frame(hcd, qh, &skip_frames); ++ fr_idx = frame_list_idx(qh->sched_frame); ++ } ++ ++ qh->td_first = qh->td_last = frame_to_desc_idx(qh, fr_idx); ++ ++ return skip_frames; ++} ++ ++#define ISOC_URB_GIVEBACK_ASAP ++ ++#define MAX_ISOC_XFER_SIZE_FS 1023 ++#define MAX_ISOC_XFER_SIZE_HS 3072 ++#define DESCNUM_THRESHOLD 4 ++ ++static void init_isoc_dma_desc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, ++ uint8_t skip_frames) ++{ ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc; ++ dwc_otg_qtd_t *qtd; ++ dwc_otg_host_dma_desc_t *dma_desc; ++ uint16_t idx, inc, n_desc, ntd_max, max_xfer_size; ++ ++ idx = qh->td_last; ++ inc = qh->interval; ++ n_desc = 0; ++ ++ ntd_max = (max_desc_num(qh) + qh->interval - 1) / qh->interval; ++ if (skip_frames && !qh->channel) ++ ntd_max = ntd_max - skip_frames / qh->interval; ++ ++ max_xfer_size = ++ (qh->dev_speed == ++ DWC_OTG_EP_SPEED_HIGH) ? MAX_ISOC_XFER_SIZE_HS : ++ MAX_ISOC_XFER_SIZE_FS; ++ ++ DWC_CIRCLEQ_FOREACH(qtd, &qh->qtd_list, qtd_list_entry) { ++ while ((qh->ntd < ntd_max) ++ && (qtd->isoc_frame_index_last < ++ qtd->urb->packet_count)) { ++ ++ dma_desc = &qh->desc_list[idx]; ++ dwc_memset(dma_desc, 0x00, sizeof(dwc_otg_host_dma_desc_t)); ++ ++ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index_last]; ++ ++ if (frame_desc->length > max_xfer_size) ++ qh->n_bytes[idx] = max_xfer_size; ++ else ++ qh->n_bytes[idx] = frame_desc->length; ++ dma_desc->status.b_isoc.n_bytes = qh->n_bytes[idx]; ++ dma_desc->status.b_isoc.a = 1; ++ dma_desc->status.b_isoc.sts = 0; ++ ++ dma_desc->buf = qtd->urb->dma + frame_desc->offset; ++ ++ qh->ntd++; ++ ++ qtd->isoc_frame_index_last++; ++ ++#ifdef ISOC_URB_GIVEBACK_ASAP ++ /* ++ * Set IOC for each descriptor corresponding to the ++ * last frame of the URB. ++ */ ++ if (qtd->isoc_frame_index_last == ++ qtd->urb->packet_count) ++ dma_desc->status.b_isoc.ioc = 1; ++ ++#endif ++ idx = desclist_idx_inc(idx, inc, qh->dev_speed); ++ n_desc++; ++ ++ } ++ qtd->in_process = 1; ++ } ++ ++ qh->td_last = idx; ++ ++#ifdef ISOC_URB_GIVEBACK_ASAP ++ /* Set IOC for the last descriptor if descriptor list is full */ ++ if (qh->ntd == ntd_max) { ++ idx = desclist_idx_dec(qh->td_last, inc, qh->dev_speed); ++ qh->desc_list[idx].status.b_isoc.ioc = 1; ++ } ++#else ++ /* ++ * Set IOC bit only for one descriptor. ++ * Always try to be ahead of HW processing, ++ * i.e. on IOC generation driver activates next descriptors but ++ * core continues to process descriptors followed the one with IOC set. ++ */ ++ ++ if (n_desc > DESCNUM_THRESHOLD) { ++ /* ++ * Move IOC "up". Required even if there is only one QTD ++ * in the list, cause QTDs migth continue to be queued, ++ * but during the activation it was only one queued. ++ * Actually more than one QTD might be in the list if this function called ++ * from XferCompletion - QTDs was queued during HW processing of the previous ++ * descriptor chunk. ++ */ ++ idx = dwc_desclist_idx_dec(idx, inc * ((qh->ntd + 1) / 2), qh->dev_speed); ++ } else { ++ /* ++ * Set the IOC for the latest descriptor ++ * if either number of descriptor is not greather than threshold ++ * or no more new descriptors activated. ++ */ ++ idx = dwc_desclist_idx_dec(qh->td_last, inc, qh->dev_speed); ++ } ++ ++ qh->desc_list[idx].status.b_isoc.ioc = 1; ++#endif ++} ++ ++static void init_non_isoc_dma_desc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ ++ dwc_hc_t *hc; ++ dwc_otg_host_dma_desc_t *dma_desc; ++ dwc_otg_qtd_t *qtd; ++ int num_packets, len, n_desc = 0; ++ ++ hc = qh->channel; ++ ++ /* ++ * Start with hc->xfer_buff initialized in ++ * assign_and_init_hc(), then if SG transfer consists of multiple URBs, ++ * this pointer re-assigned to the buffer of the currently processed QTD. ++ * For non-SG request there is always one QTD active. ++ */ ++ ++ DWC_CIRCLEQ_FOREACH(qtd, &qh->qtd_list, qtd_list_entry) { ++ ++ if (n_desc) { ++ /* SG request - more than 1 QTDs */ ++ hc->xfer_buff = (uint8_t *)qtd->urb->dma + qtd->urb->actual_length; ++ hc->xfer_len = qtd->urb->length - qtd->urb->actual_length; ++ } ++ ++ qtd->n_desc = 0; ++ ++ do { ++ dma_desc = &qh->desc_list[n_desc]; ++ len = hc->xfer_len; ++ ++ if (len > MAX_DMA_DESC_SIZE) ++ len = MAX_DMA_DESC_SIZE - hc->max_packet + 1; ++ ++ if (hc->ep_is_in) { ++ if (len > 0) { ++ num_packets = (len + hc->max_packet - 1) / hc->max_packet; ++ } else { ++ /* Need 1 packet for transfer length of 0. */ ++ num_packets = 1; ++ } ++ /* Always program an integral # of max packets for IN transfers. */ ++ len = num_packets * hc->max_packet; ++ } ++ ++ dma_desc->status.b.n_bytes = len; ++ ++ qh->n_bytes[n_desc] = len; ++ ++ if ((qh->ep_type == UE_CONTROL) ++ && (qtd->control_phase == DWC_OTG_CONTROL_SETUP)) ++ dma_desc->status.b.sup = 1; /* Setup Packet */ ++ ++ dma_desc->status.b.a = 1; /* Active descriptor */ ++ dma_desc->status.b.sts = 0; ++ ++ dma_desc->buf = ++ ((unsigned long)hc->xfer_buff & 0xffffffff); ++ ++ /* ++ * Last descriptor(or single) of IN transfer ++ * with actual size less than MaxPacket. ++ */ ++ if (len > hc->xfer_len) { ++ hc->xfer_len = 0; ++ } else { ++ hc->xfer_buff += len; ++ hc->xfer_len -= len; ++ } ++ ++ qtd->n_desc++; ++ n_desc++; ++ } ++ while ((hc->xfer_len > 0) && (n_desc != MAX_DMA_DESC_NUM_GENERIC)); ++ ++ ++ qtd->in_process = 1; ++ ++ if (qh->ep_type == UE_CONTROL) ++ break; ++ ++ if (n_desc == MAX_DMA_DESC_NUM_GENERIC) ++ break; ++ } ++ ++ if (n_desc) { ++ /* Request Transfer Complete interrupt for the last descriptor */ ++ qh->desc_list[n_desc - 1].status.b.ioc = 1; ++ /* End of List indicator */ ++ qh->desc_list[n_desc - 1].status.b.eol = 1; ++ ++ hc->ntd = n_desc; ++ } ++} ++ ++/** ++ * For Control and Bulk endpoints initializes descriptor list ++ * and starts the transfer. ++ * ++ * For Interrupt and Isochronous endpoints initializes descriptor list ++ * then updates FrameList, marking appropriate entries as active. ++ * In case of Isochronous, the starting descriptor index is calculated based ++ * on the scheduled frame, but only on the first transfer descriptor within a session. ++ * Then starts the transfer via enabling the channel. ++ * For Isochronous endpoint the channel is not halted on XferComplete ++ * interrupt so remains assigned to the endpoint(QH) until session is done. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh The QH to init. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++void dwc_otg_hcd_start_xfer_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ /* Channel is already assigned */ ++ dwc_hc_t *hc = qh->channel; ++ uint8_t skip_frames = 0; ++ ++ switch (hc->ep_type) { ++ case DWC_OTG_EP_TYPE_CONTROL: ++ case DWC_OTG_EP_TYPE_BULK: ++ init_non_isoc_dma_desc(hcd, qh); ++ ++ dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc); ++ break; ++ case DWC_OTG_EP_TYPE_INTR: ++ init_non_isoc_dma_desc(hcd, qh); ++ ++ update_frame_list(hcd, qh, 1); ++ ++ dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc); ++ break; ++ case DWC_OTG_EP_TYPE_ISOC: ++ ++ if (!qh->ntd) ++ skip_frames = recalc_initial_desc_idx(hcd, qh); ++ ++ init_isoc_dma_desc(hcd, qh, skip_frames); ++ ++ if (!hc->xfer_started) { ++ ++ update_frame_list(hcd, qh, 1); ++ ++ /* ++ * Always set to max, instead of actual size. ++ * Otherwise ntd will be changed with ++ * channel being enabled. Not recommended. ++ * ++ */ ++ hc->ntd = max_desc_num(qh); ++ /* Enable channel only once for ISOC */ ++ dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc); ++ } ++ ++ break; ++ default: ++ ++ break; ++ } ++} ++ ++static void complete_isoc_xfer_ddma(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_halt_status_e halt_status) ++{ ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc; ++ dwc_otg_qtd_t *qtd, *qtd_tmp; ++ dwc_otg_qh_t *qh; ++ dwc_otg_host_dma_desc_t *dma_desc; ++ uint16_t idx, remain; ++ uint8_t urb_compl; ++ ++ qh = hc->qh; ++ idx = qh->td_first; ++ ++ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) { ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) ++ qtd->in_process = 0; ++ return; ++ } else if ((halt_status == DWC_OTG_HC_XFER_AHB_ERR) || ++ (halt_status == DWC_OTG_HC_XFER_BABBLE_ERR)) { ++ /* ++ * Channel is halted in these error cases. ++ * Considered as serious issues. ++ * Complete all URBs marking all frames as failed, ++ * irrespective whether some of the descriptors(frames) succeeded or no. ++ * Pass error code to completion routine as well, to ++ * update urb->status, some of class drivers might use it to stop ++ * queing transfer requests. ++ */ ++ int err = (halt_status == DWC_OTG_HC_XFER_AHB_ERR) ++ ? (-DWC_E_IO) ++ : (-DWC_E_OVERFLOW); ++ ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) { ++ for (idx = 0; idx < qtd->urb->packet_count; idx++) { ++ frame_desc = &qtd->urb->iso_descs[idx]; ++ frame_desc->status = err; ++ } ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, err); ++ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); ++ } ++ return; ++ } ++ ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) { ++ ++ if (!qtd->in_process) ++ break; ++ ++ urb_compl = 0; ++ ++ do { ++ ++ dma_desc = &qh->desc_list[idx]; ++ ++ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; ++ remain = hc->ep_is_in ? dma_desc->status.b_isoc.n_bytes : 0; ++ ++ if (dma_desc->status.b_isoc.sts == DMA_DESC_STS_PKTERR) { ++ /* ++ * XactError or, unable to complete all the transactions ++ * in the scheduled micro-frame/frame, ++ * both indicated by DMA_DESC_STS_PKTERR. ++ */ ++ qtd->urb->error_count++; ++ frame_desc->actual_length = qh->n_bytes[idx] - remain; ++ frame_desc->status = -DWC_E_PROTOCOL; ++ } else { ++ /* Success */ ++ ++ frame_desc->actual_length = qh->n_bytes[idx] - remain; ++ frame_desc->status = 0; ++ } ++ ++ if (++qtd->isoc_frame_index == qtd->urb->packet_count) { ++ /* ++ * urb->status is not used for isoc transfers here. ++ * The individual frame_desc status are used instead. ++ */ ++ ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); ++ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); ++ ++ /* ++ * This check is necessary because urb_dequeue can be called ++ * from urb complete callback(sound driver example). ++ * All pending URBs are dequeued there, so no need for ++ * further processing. ++ */ ++ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) { ++ return; ++ } ++ ++ urb_compl = 1; ++ ++ } ++ ++ qh->ntd--; ++ ++ /* Stop if IOC requested descriptor reached */ ++ if (dma_desc->status.b_isoc.ioc) { ++ idx = desclist_idx_inc(idx, qh->interval, hc->speed); ++ goto stop_scan; ++ } ++ ++ idx = desclist_idx_inc(idx, qh->interval, hc->speed); ++ ++ if (urb_compl) ++ break; ++ } ++ while (idx != qh->td_first); ++ } ++stop_scan: ++ qh->td_first = idx; ++} ++ ++uint8_t update_non_isoc_urb_state_ddma(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_host_dma_desc_t * dma_desc, ++ dwc_otg_halt_status_e halt_status, ++ uint32_t n_bytes, uint8_t * xfer_done) ++{ ++ ++ uint16_t remain = hc->ep_is_in ? dma_desc->status.b.n_bytes : 0; ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ ++ if (halt_status == DWC_OTG_HC_XFER_AHB_ERR) { ++ urb->status = -DWC_E_IO; ++ return 1; ++ } ++ if (dma_desc->status.b.sts == DMA_DESC_STS_PKTERR) { ++ switch (halt_status) { ++ case DWC_OTG_HC_XFER_STALL: ++ urb->status = -DWC_E_PIPE; ++ break; ++ case DWC_OTG_HC_XFER_BABBLE_ERR: ++ urb->status = -DWC_E_OVERFLOW; ++ break; ++ case DWC_OTG_HC_XFER_XACT_ERR: ++ urb->status = -DWC_E_PROTOCOL; ++ break; ++ default: ++ DWC_ERROR("%s: Unhandled descriptor error status (%d)\n", __func__, ++ halt_status); ++ break; ++ } ++ return 1; ++ } ++ ++ if (dma_desc->status.b.a == 1) { ++ DWC_DEBUGPL(DBG_HCDV, ++ "Active descriptor encountered on channel %d\n", ++ hc->hc_num); ++ return 0; ++ } ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL) { ++ if (qtd->control_phase == DWC_OTG_CONTROL_DATA) { ++ urb->actual_length += n_bytes - remain; ++ if (remain || urb->actual_length == urb->length) { ++ /* ++ * For Control Data stage do not set urb->status=0 to prevent ++ * URB callback. Set it when Status phase done. See below. ++ */ ++ *xfer_done = 1; ++ } ++ ++ } else if (qtd->control_phase == DWC_OTG_CONTROL_STATUS) { ++ urb->status = 0; ++ *xfer_done = 1; ++ } ++ /* No handling for SETUP stage */ ++ } else { ++ /* BULK and INTR */ ++ urb->actual_length += n_bytes - remain; ++ if (remain || urb->actual_length == urb->length) { ++ urb->status = 0; ++ *xfer_done = 1; ++ } ++ } ++ ++ return 0; ++} ++ ++static void complete_non_isoc_xfer_ddma(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_halt_status_e halt_status) ++{ ++ dwc_otg_hcd_urb_t *urb = NULL; ++ dwc_otg_qtd_t *qtd, *qtd_tmp; ++ dwc_otg_qh_t *qh; ++ dwc_otg_host_dma_desc_t *dma_desc; ++ uint32_t n_bytes, n_desc, i; ++ uint8_t failed = 0, xfer_done; ++ ++ n_desc = 0; ++ ++ qh = hc->qh; ++ ++ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) { ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) { ++ qtd->in_process = 0; ++ } ++ return; ++ } ++ ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) { ++ ++ urb = qtd->urb; ++ ++ n_bytes = 0; ++ xfer_done = 0; ++ ++ for (i = 0; i < qtd->n_desc; i++) { ++ dma_desc = &qh->desc_list[n_desc]; ++ ++ n_bytes = qh->n_bytes[n_desc]; ++ ++ failed = ++ update_non_isoc_urb_state_ddma(hcd, hc, qtd, ++ dma_desc, ++ halt_status, n_bytes, ++ &xfer_done); ++ ++ if (failed ++ || (xfer_done ++ && (urb->status != -DWC_E_IN_PROGRESS))) { ++ ++ hcd->fops->complete(hcd, urb->priv, urb, ++ urb->status); ++ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); ++ ++ if (failed) ++ goto stop_scan; ++ } else if (qh->ep_type == UE_CONTROL) { ++ if (qtd->control_phase == DWC_OTG_CONTROL_SETUP) { ++ if (urb->length > 0) { ++ qtd->control_phase = DWC_OTG_CONTROL_DATA; ++ } else { ++ qtd->control_phase = DWC_OTG_CONTROL_STATUS; ++ } ++ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction done\n"); ++ } else if (qtd->control_phase == DWC_OTG_CONTROL_DATA) { ++ if (xfer_done) { ++ qtd->control_phase = DWC_OTG_CONTROL_STATUS; ++ DWC_DEBUGPL(DBG_HCDV, " Control data transfer done\n"); ++ } else if (i + 1 == qtd->n_desc) { ++ /* ++ * Last descriptor for Control data stage which is ++ * not completed yet. ++ */ ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ } ++ } ++ } ++ ++ n_desc++; ++ } ++ ++ } ++ ++stop_scan: ++ ++ if (qh->ep_type != UE_CONTROL) { ++ /* ++ * Resetting the data toggle for bulk ++ * and interrupt endpoints in case of stall. See handle_hc_stall_intr() ++ */ ++ if (halt_status == DWC_OTG_HC_XFER_STALL) ++ qh->data_toggle = DWC_OTG_HC_PID_DATA0; ++ else ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ } ++ ++ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) { ++ hcint_data_t hcint; ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ if (hcint.b.nyet) { ++ /* ++ * Got a NYET on the last transaction of the transfer. It ++ * means that the endpoint should be in the PING state at the ++ * beginning of the next transfer. ++ */ ++ qh->ping_state = 1; ++ clear_hc_int(hc_regs, nyet); ++ } ++ ++ } ++ ++} ++ ++/** ++ * This function is called from interrupt handlers. ++ * Scans the descriptor list, updates URB's status and ++ * calls completion routine for the URB if it's done. ++ * Releases the channel to be used by other transfers. ++ * In case of Isochronous endpoint the channel is not halted until ++ * the end of the session, i.e. QTD list is empty. ++ * If periodic channel released the FrameList is updated accordingly. ++ * ++ * Calls transaction selection routines to activate pending transfers. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param hc Host channel, the transfer is completed on. ++ * @param hc_regs Host channel registers. ++ * @param halt_status Reason the channel is being halted, ++ * or just XferComplete for isochronous transfer ++ */ ++void dwc_otg_hcd_complete_xfer_ddma(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_halt_status_e halt_status) ++{ ++ uint8_t continue_isoc_xfer = 0; ++ dwc_otg_transaction_type_e tr_type; ++ dwc_otg_qh_t *qh = hc->qh; ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ ++ complete_isoc_xfer_ddma(hcd, hc, hc_regs, halt_status); ++ ++ /* Release the channel if halted or session completed */ ++ if (halt_status != DWC_OTG_HC_XFER_COMPLETE || ++ DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { ++ ++ /* Halt the channel if session completed */ ++ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) { ++ dwc_otg_hc_halt(hcd->core_if, hc, halt_status); ++ } ++ ++ release_channel_ddma(hcd, qh); ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ } else { ++ /* Keep in assigned schedule to continue transfer */ ++ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned, ++ &qh->qh_list_entry); ++ continue_isoc_xfer = 1; ++ ++ } ++ /** @todo Consider the case when period exceeds FrameList size. ++ * Frame Rollover interrupt should be used. ++ */ ++ } else { ++ /* Scan descriptor list to complete the URB(s), then release the channel */ ++ complete_non_isoc_xfer_ddma(hcd, hc, hc_regs, halt_status); ++ ++ release_channel_ddma(hcd, qh); ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ ++ if (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { ++ /* Add back to inactive non-periodic schedule on normal completion */ ++ dwc_otg_hcd_qh_add(hcd, qh); ++ } ++ ++ } ++ tr_type = dwc_otg_hcd_select_transactions(hcd); ++ if (tr_type != DWC_OTG_TRANSACTION_NONE || continue_isoc_xfer) { ++ if (continue_isoc_xfer) { ++ if (tr_type == DWC_OTG_TRANSACTION_NONE) { ++ tr_type = DWC_OTG_TRANSACTION_PERIODIC; ++ } else if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC) { ++ tr_type = DWC_OTG_TRANSACTION_ALL; ++ } ++ } ++ dwc_otg_hcd_queue_transactions(hcd, tr_type); ++ } ++} ++ ++#endif /* DWC_DEVICE_ONLY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h +@@ -0,0 +1,412 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_if.h $ ++ * $Revision: #12 $ ++ * $Date: 2011/10/26 $ ++ * $Change: 1873028 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++#ifndef __DWC_HCD_IF_H__ ++#define __DWC_HCD_IF_H__ ++ ++#include "dwc_otg_core_if.h" ++ ++/** @file ++ * This file defines DWC_OTG HCD Core API. ++ */ ++ ++struct dwc_otg_hcd; ++typedef struct dwc_otg_hcd dwc_otg_hcd_t; ++ ++struct dwc_otg_hcd_urb; ++typedef struct dwc_otg_hcd_urb dwc_otg_hcd_urb_t; ++ ++/** @name HCD Function Driver Callbacks */ ++/** @{ */ ++ ++/** This function is called whenever core switches to host mode. */ ++typedef int (*dwc_otg_hcd_start_cb_t) (dwc_otg_hcd_t * hcd); ++ ++/** This function is called when device has been disconnected */ ++typedef int (*dwc_otg_hcd_disconnect_cb_t) (dwc_otg_hcd_t * hcd); ++ ++/** Wrapper provides this function to HCD to core, so it can get hub information to which device is connected */ ++typedef int (*dwc_otg_hcd_hub_info_from_urb_cb_t) (dwc_otg_hcd_t * hcd, ++ void *urb_handle, ++ uint32_t * hub_addr, ++ uint32_t * port_addr); ++/** Via this function HCD core gets device speed */ ++typedef int (*dwc_otg_hcd_speed_from_urb_cb_t) (dwc_otg_hcd_t * hcd, ++ void *urb_handle); ++ ++/** This function is called when urb is completed */ ++typedef int (*dwc_otg_hcd_complete_urb_cb_t) (dwc_otg_hcd_t * hcd, ++ void *urb_handle, ++ dwc_otg_hcd_urb_t * dwc_otg_urb, ++ int32_t status); ++ ++/** Via this function HCD core gets b_hnp_enable parameter */ ++typedef int (*dwc_otg_hcd_get_b_hnp_enable) (dwc_otg_hcd_t * hcd); ++ ++struct dwc_otg_hcd_function_ops { ++ dwc_otg_hcd_start_cb_t start; ++ dwc_otg_hcd_disconnect_cb_t disconnect; ++ dwc_otg_hcd_hub_info_from_urb_cb_t hub_info; ++ dwc_otg_hcd_speed_from_urb_cb_t speed; ++ dwc_otg_hcd_complete_urb_cb_t complete; ++ dwc_otg_hcd_get_b_hnp_enable get_b_hnp_enable; ++}; ++/** @} */ ++ ++/** @name HCD Core API */ ++/** @{ */ ++/** This function allocates dwc_otg_hcd structure and returns pointer on it. */ ++extern dwc_otg_hcd_t *dwc_otg_hcd_alloc_hcd(void); ++ ++/** This function should be called to initiate HCD Core. ++ * ++ * @param hcd The HCD ++ * @param core_if The DWC_OTG Core ++ * ++ * Returns -DWC_E_NO_MEMORY if no enough memory. ++ * Returns 0 on success ++ */ ++extern int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd, dwc_otg_core_if_t * core_if); ++ ++/** Frees HCD ++ * ++ * @param hcd The HCD ++ */ ++extern void dwc_otg_hcd_remove(dwc_otg_hcd_t * hcd); ++ ++/** This function should be called on every hardware interrupt. ++ * ++ * @param dwc_otg_hcd The HCD ++ * ++ * Returns non zero if interrupt is handled ++ * Return 0 if interrupt is not handled ++ */ ++extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++ ++/** ++ * Returns private data set by ++ * dwc_otg_hcd_set_priv_data function. ++ * ++ * @param hcd The HCD ++ */ ++extern void *dwc_otg_hcd_get_priv_data(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Set private data. ++ * ++ * @param hcd The HCD ++ * @param priv_data pointer to be stored in private data ++ */ ++extern void dwc_otg_hcd_set_priv_data(dwc_otg_hcd_t * hcd, void *priv_data); ++ ++/** ++ * This function initializes the HCD Core. ++ * ++ * @param hcd The HCD ++ * @param fops The Function Driver Operations data structure containing pointers to all callbacks. ++ * ++ * Returns -DWC_E_NO_DEVICE if Core is currently is in device mode. ++ * Returns 0 on success ++ */ ++extern int dwc_otg_hcd_start(dwc_otg_hcd_t * hcd, ++ struct dwc_otg_hcd_function_ops *fops); ++ ++/** ++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are ++ * stopped. ++ * ++ * @param hcd The HCD ++ */ ++extern void dwc_otg_hcd_stop(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Handles hub class-specific requests. ++ * ++ * @param dwc_otg_hcd The HCD ++ * @param typeReq Request Type ++ * @param wValue wValue from control request ++ * @param wIndex wIndex from control request ++ * @param buf data buffer ++ * @param wLength data buffer length ++ * ++ * Returns -DWC_E_INVALID if invalid argument is passed ++ * Returns 0 on success ++ */ ++extern int dwc_otg_hcd_hub_control(dwc_otg_hcd_t * dwc_otg_hcd, ++ uint16_t typeReq, uint16_t wValue, ++ uint16_t wIndex, uint8_t * buf, ++ uint16_t wLength); ++ ++/** ++ * Returns otg port number. ++ * ++ * @param hcd The HCD ++ */ ++extern uint32_t dwc_otg_hcd_otg_port(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Returns OTG version - either 1.3 or 2.0. ++ * ++ * @param core_if The core_if structure pointer ++ */ ++extern uint16_t dwc_otg_get_otg_version(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Returns 1 if currently core is acting as B host, and 0 otherwise. ++ * ++ * @param hcd The HCD ++ */ ++extern uint32_t dwc_otg_hcd_is_b_host(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Returns current frame number. ++ * ++ * @param hcd The HCD ++ */ ++extern int dwc_otg_hcd_get_frame_number(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Dumps hcd state. ++ * ++ * @param hcd The HCD ++ */ ++extern void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Dump the average frame remaining at SOF. This can be used to ++ * determine average interrupt latency. Frame remaining is also shown for ++ * start transfer and two additional sample points. ++ * Currently this function is not implemented. ++ * ++ * @param hcd The HCD ++ */ ++extern void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Sends LPM transaction to the local device. ++ * ++ * @param hcd The HCD ++ * @param devaddr Device Address ++ * @param hird Host initiated resume duration ++ * @param bRemoteWake Value of bRemoteWake field in LPM transaction ++ * ++ * Returns negative value if sending LPM transaction was not succeeded. ++ * Returns 0 on success. ++ */ ++extern int dwc_otg_hcd_send_lpm(dwc_otg_hcd_t * hcd, uint8_t devaddr, ++ uint8_t hird, uint8_t bRemoteWake); ++ ++/* URB interface */ ++ ++/** ++ * Allocates memory for dwc_otg_hcd_urb structure. ++ * Allocated memory should be freed by call of DWC_FREE. ++ * ++ * @param hcd The HCD ++ * @param iso_desc_count Count of ISOC descriptors ++ * @param atomic_alloc Specefies whether to perform atomic allocation. ++ */ ++extern dwc_otg_hcd_urb_t *dwc_otg_hcd_urb_alloc(dwc_otg_hcd_t * hcd, ++ int iso_desc_count, ++ int atomic_alloc); ++ ++/** ++ * Set pipe information in URB. ++ * ++ * @param hcd_urb DWC_OTG URB ++ * @param devaddr Device Address ++ * @param ep_num Endpoint Number ++ * @param ep_type Endpoint Type ++ * @param ep_dir Endpoint Direction ++ * @param mps Max Packet Size ++ */ ++extern void dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_hcd_urb_t * hcd_urb, ++ uint8_t devaddr, uint8_t ep_num, ++ uint8_t ep_type, uint8_t ep_dir, ++ uint16_t mps); ++ ++/* Transfer flags */ ++#define URB_GIVEBACK_ASAP 0x1 ++#define URB_SEND_ZERO_PACKET 0x2 ++ ++/** ++ * Sets dwc_otg_hcd_urb parameters. ++ * ++ * @param urb DWC_OTG URB allocated by dwc_otg_hcd_urb_alloc function. ++ * @param urb_handle Unique handle for request, this will be passed back ++ * to function driver in completion callback. ++ * @param buf The buffer for the data ++ * @param dma The DMA buffer for the data ++ * @param buflen Transfer length ++ * @param sp Buffer for setup data ++ * @param sp_dma DMA address of setup data buffer ++ * @param flags Transfer flags ++ * @param interval Polling interval for interrupt or isochronous transfers. ++ */ ++extern void dwc_otg_hcd_urb_set_params(dwc_otg_hcd_urb_t * urb, ++ void *urb_handle, void *buf, ++ dwc_dma_t dma, uint32_t buflen, void *sp, ++ dwc_dma_t sp_dma, uint32_t flags, ++ uint16_t interval); ++ ++/** Gets status from dwc_otg_hcd_urb ++ * ++ * @param dwc_otg_urb DWC_OTG URB ++ */ ++extern uint32_t dwc_otg_hcd_urb_get_status(dwc_otg_hcd_urb_t * dwc_otg_urb); ++ ++/** Gets actual length from dwc_otg_hcd_urb ++ * ++ * @param dwc_otg_urb DWC_OTG URB ++ */ ++extern uint32_t dwc_otg_hcd_urb_get_actual_length(dwc_otg_hcd_urb_t * ++ dwc_otg_urb); ++ ++/** Gets error count from dwc_otg_hcd_urb. Only for ISOC URBs ++ * ++ * @param dwc_otg_urb DWC_OTG URB ++ */ ++extern uint32_t dwc_otg_hcd_urb_get_error_count(dwc_otg_hcd_urb_t * ++ dwc_otg_urb); ++ ++/** Set ISOC descriptor offset and length ++ * ++ * @param dwc_otg_urb DWC_OTG URB ++ * @param desc_num ISOC descriptor number ++ * @param offset Offset from beginig of buffer. ++ * @param length Transaction length ++ */ ++extern void dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_hcd_urb_t * dwc_otg_urb, ++ int desc_num, uint32_t offset, ++ uint32_t length); ++ ++/** Get status of ISOC descriptor, specified by desc_num ++ * ++ * @param dwc_otg_urb DWC_OTG URB ++ * @param desc_num ISOC descriptor number ++ */ ++extern uint32_t dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_hcd_urb_t * ++ dwc_otg_urb, int desc_num); ++ ++/** Get actual length of ISOC descriptor, specified by desc_num ++ * ++ * @param dwc_otg_urb DWC_OTG URB ++ * @param desc_num ISOC descriptor number ++ */ ++extern uint32_t dwc_otg_hcd_urb_get_iso_desc_actual_length(dwc_otg_hcd_urb_t * ++ dwc_otg_urb, ++ int desc_num); ++ ++/** Queue URB. After transfer is completes, the complete callback will be called with the URB status ++ * ++ * @param dwc_otg_hcd The HCD ++ * @param dwc_otg_urb DWC_OTG URB ++ * @param ep_handle Out parameter for returning endpoint handle ++ * @param atomic_alloc Flag to do atomic allocation if needed ++ * ++ * Returns -DWC_E_NO_DEVICE if no device is connected. ++ * Returns -DWC_E_NO_MEMORY if there is no enough memory. ++ * Returns 0 on success. ++ */ ++extern int dwc_otg_hcd_urb_enqueue(dwc_otg_hcd_t * dwc_otg_hcd, ++ dwc_otg_hcd_urb_t * dwc_otg_urb, ++ void **ep_handle, int atomic_alloc); ++ ++/** De-queue the specified URB ++ * ++ * @param dwc_otg_hcd The HCD ++ * @param dwc_otg_urb DWC_OTG URB ++ */ ++extern int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_t * dwc_otg_hcd, ++ dwc_otg_hcd_urb_t * dwc_otg_urb); ++ ++/** Frees resources in the DWC_otg controller related to a given endpoint. ++ * Any URBs for the endpoint must already be dequeued. ++ * ++ * @param hcd The HCD ++ * @param ep_handle Endpoint handle, returned by dwc_otg_hcd_urb_enqueue function ++ * @param retry Number of retries if there are queued transfers. ++ * ++ * Returns -DWC_E_INVALID if invalid arguments are passed. ++ * Returns 0 on success ++ */ ++extern int dwc_otg_hcd_endpoint_disable(dwc_otg_hcd_t * hcd, void *ep_handle, ++ int retry); ++ ++/* Resets the data toggle in qh structure. This function can be called from ++ * usb_clear_halt routine. ++ * ++ * @param hcd The HCD ++ * @param ep_handle Endpoint handle, returned by dwc_otg_hcd_urb_enqueue function ++ * ++ * Returns -DWC_E_INVALID if invalid arguments are passed. ++ * Returns 0 on success ++ */ ++extern int dwc_otg_hcd_endpoint_reset(dwc_otg_hcd_t * hcd, void *ep_handle); ++ ++/** Returns 1 if status of specified port is changed and 0 otherwise. ++ * ++ * @param hcd The HCD ++ * @param port Port number ++ */ ++extern int dwc_otg_hcd_is_status_changed(dwc_otg_hcd_t * hcd, int port); ++ ++/** Call this function to check if bandwidth was allocated for specified endpoint. ++ * Only for ISOC and INTERRUPT endpoints. ++ * ++ * @param hcd The HCD ++ * @param ep_handle Endpoint handle ++ */ ++extern int dwc_otg_hcd_is_bandwidth_allocated(dwc_otg_hcd_t * hcd, ++ void *ep_handle); ++ ++/** Call this function to check if bandwidth was freed for specified endpoint. ++ * ++ * @param hcd The HCD ++ * @param ep_handle Endpoint handle ++ */ ++extern int dwc_otg_hcd_is_bandwidth_freed(dwc_otg_hcd_t * hcd, void *ep_handle); ++ ++/** Returns bandwidth allocated for specified endpoint in microseconds. ++ * Only for ISOC and INTERRUPT endpoints. ++ * ++ * @param hcd The HCD ++ * @param ep_handle Endpoint handle ++ */ ++extern uint8_t dwc_otg_hcd_get_ep_bandwidth(dwc_otg_hcd_t * hcd, ++ void *ep_handle); ++ ++/** @} */ ++ ++#endif /* __DWC_HCD_IF_H__ */ ++#endif /* DWC_DEVICE_ONLY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c +@@ -0,0 +1,2106 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_intr.c $ ++ * $Revision: #89 $ ++ * $Date: 2011/10/20 $ ++ * $Change: 1869487 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++ ++#include "dwc_otg_hcd.h" ++#include "dwc_otg_regs.h" ++ ++extern bool microframe_schedule; ++ ++/** @file ++ * This file contains the implementation of the HCD Interrupt handlers. ++ */ ++ ++/** This function handles interrupts for the HCD. */ ++int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ int retval = 0; ++ ++ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; ++ gintsts_data_t gintsts; ++#ifdef DEBUG ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ ++ //GRAYG: debugging ++ if (NULL == global_regs) { ++ DWC_DEBUGPL(DBG_HCD, "**** NULL regs: dwc_otg_hcd=%p " ++ "core_if=%p\n", ++ dwc_otg_hcd, global_regs); ++ return retval; ++ } ++#endif ++ ++ /* Exit from ISR if core is hibernated */ ++ if (core_if->hibernation_suspend == 1) { ++ return retval; ++ } ++ DWC_SPINLOCK(dwc_otg_hcd->lock); ++ /* Check if HOST Mode */ ++ if (dwc_otg_is_host_mode(core_if)) { ++ gintsts.d32 = dwc_otg_read_core_intr(core_if); ++ if (!gintsts.d32) { ++ DWC_SPINUNLOCK(dwc_otg_hcd->lock); ++ return 0; ++ } ++#ifdef DEBUG ++ /* Don't print debug message in the interrupt handler on SOF */ ++#ifndef DEBUG_SOF ++ if (gintsts.d32 != DWC_SOF_INTR_MASK) ++#endif ++ DWC_DEBUGPL(DBG_HCDI, "\n"); ++#endif ++ ++#ifdef DEBUG ++#ifndef DEBUG_SOF ++ if (gintsts.d32 != DWC_SOF_INTR_MASK) ++#endif ++ DWC_DEBUGPL(DBG_HCDI, ++ "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x core_if=%p\n", ++ gintsts.d32, core_if); ++#endif ++ ++ if (gintsts.b.sofintr) { ++ retval |= dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd); ++ } ++ if (gintsts.b.rxstsqlvl) { ++ retval |= ++ dwc_otg_hcd_handle_rx_status_q_level_intr ++ (dwc_otg_hcd); ++ } ++ if (gintsts.b.nptxfempty) { ++ retval |= ++ dwc_otg_hcd_handle_np_tx_fifo_empty_intr ++ (dwc_otg_hcd); ++ } ++ if (gintsts.b.i2cintr) { ++ /** @todo Implement i2cintr handler. */ ++ } ++ if (gintsts.b.portintr) { ++ retval |= dwc_otg_hcd_handle_port_intr(dwc_otg_hcd); ++ } ++ if (gintsts.b.hcintr) { ++ retval |= dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd); ++ } ++ if (gintsts.b.ptxfempty) { ++ retval |= ++ dwc_otg_hcd_handle_perio_tx_fifo_empty_intr ++ (dwc_otg_hcd); ++ } ++#ifdef DEBUG ++#ifndef DEBUG_SOF ++ if (gintsts.d32 != DWC_SOF_INTR_MASK) ++#endif ++ { ++ DWC_DEBUGPL(DBG_HCDI, ++ "DWC OTG HCD Finished Servicing Interrupts\n"); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n", ++ DWC_READ_REG32(&global_regs->gintsts)); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n", ++ DWC_READ_REG32(&global_regs->gintmsk)); ++ } ++#endif ++ ++#ifdef DEBUG ++#ifndef DEBUG_SOF ++ if (gintsts.d32 != DWC_SOF_INTR_MASK) ++#endif ++ DWC_DEBUGPL(DBG_HCDI, "\n"); ++#endif ++ ++ } ++ DWC_SPINUNLOCK(dwc_otg_hcd->lock); ++ return retval; ++} ++ ++#ifdef DWC_TRACK_MISSED_SOFS ++#warning Compiling code to track missed SOFs ++#define FRAME_NUM_ARRAY_SIZE 1000 ++/** ++ * This function is for debug only. ++ */ ++static inline void track_missed_sofs(uint16_t curr_frame_number) ++{ ++ static uint16_t frame_num_array[FRAME_NUM_ARRAY_SIZE]; ++ static uint16_t last_frame_num_array[FRAME_NUM_ARRAY_SIZE]; ++ static int frame_num_idx = 0; ++ static uint16_t last_frame_num = DWC_HFNUM_MAX_FRNUM; ++ static int dumped_frame_num_array = 0; ++ ++ if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) { ++ if (((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) != ++ curr_frame_number) { ++ frame_num_array[frame_num_idx] = curr_frame_number; ++ last_frame_num_array[frame_num_idx++] = last_frame_num; ++ } ++ } else if (!dumped_frame_num_array) { ++ int i; ++ DWC_PRINTF("Frame Last Frame\n"); ++ DWC_PRINTF("----- ----------\n"); ++ for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) { ++ DWC_PRINTF("0x%04x 0x%04x\n", ++ frame_num_array[i], last_frame_num_array[i]); ++ } ++ dumped_frame_num_array = 1; ++ } ++ last_frame_num = curr_frame_number; ++} ++#endif ++ ++/** ++ * Handles the start-of-frame interrupt in host mode. Non-periodic ++ * transactions may be queued to the DWC_otg controller for the current ++ * (micro)frame. Periodic transactions may be queued to the controller for the ++ * next (micro)frame. ++ */ ++int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * hcd) ++{ ++ hfnum_data_t hfnum; ++ dwc_list_link_t *qh_entry; ++ dwc_otg_qh_t *qh; ++ dwc_otg_transaction_type_e tr_type; ++ gintsts_data_t gintsts = {.d32 = 0 }; ++ ++ hfnum.d32 = ++ DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hfnum); ++ ++#ifdef DEBUG_SOF ++ DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n"); ++#endif ++ hcd->frame_number = hfnum.b.frnum; ++ ++#ifdef DEBUG ++ hcd->frrem_accum += hfnum.b.frrem; ++ hcd->frrem_samples++; ++#endif ++ ++#ifdef DWC_TRACK_MISSED_SOFS ++ track_missed_sofs(hcd->frame_number); ++#endif ++ /* Determine whether any periodic QHs should be executed. */ ++ qh_entry = DWC_LIST_FIRST(&hcd->periodic_sched_inactive); ++ while (qh_entry != &hcd->periodic_sched_inactive) { ++ qh = DWC_LIST_ENTRY(qh_entry, dwc_otg_qh_t, qh_list_entry); ++ qh_entry = qh_entry->next; ++ if (dwc_frame_num_le(qh->sched_frame, hcd->frame_number)) { ++ /* ++ * Move QH to the ready list to be executed next ++ * (micro)frame. ++ */ ++ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_ready, ++ &qh->qh_list_entry); ++ } ++ } ++ tr_type = dwc_otg_hcd_select_transactions(hcd); ++ if (tr_type != DWC_OTG_TRANSACTION_NONE) { ++ dwc_otg_hcd_queue_transactions(hcd, tr_type); ++ } ++ ++ /* Clear interrupt */ ++ gintsts.b.sofintr = 1; ++ DWC_WRITE_REG32(&hcd->core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at ++ * least one packet in the Rx FIFO. The packets are moved from the FIFO to ++ * memory if the DWC_otg controller is operating in Slave mode. */ ++int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ host_grxsts_data_t grxsts; ++ dwc_hc_t *hc = NULL; ++ ++ DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n"); ++ ++ grxsts.d32 = ++ DWC_READ_REG32(&dwc_otg_hcd->core_if->core_global_regs->grxstsp); ++ ++ hc = dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum]; ++ if (!hc) { ++ DWC_ERROR("Unable to get corresponding channel\n"); ++ return 0; ++ } ++ ++ /* Packet Status */ ++ DWC_DEBUGPL(DBG_HCDV, " Ch num = %d\n", grxsts.b.chnum); ++ DWC_DEBUGPL(DBG_HCDV, " Count = %d\n", grxsts.b.bcnt); ++ DWC_DEBUGPL(DBG_HCDV, " DPID = %d, hc.dpid = %d\n", grxsts.b.dpid, ++ hc->data_pid_start); ++ DWC_DEBUGPL(DBG_HCDV, " PStatus = %d\n", grxsts.b.pktsts); ++ ++ switch (grxsts.b.pktsts) { ++ case DWC_GRXSTS_PKTSTS_IN: ++ /* Read the data into the host buffer. */ ++ if (grxsts.b.bcnt > 0) { ++ dwc_otg_read_packet(dwc_otg_hcd->core_if, ++ hc->xfer_buff, grxsts.b.bcnt); ++ ++ /* Update the HC fields for the next packet received. */ ++ hc->xfer_count += grxsts.b.bcnt; ++ hc->xfer_buff += grxsts.b.bcnt; ++ } ++ ++ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: ++ case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR: ++ case DWC_GRXSTS_PKTSTS_CH_HALTED: ++ /* Handled in interrupt, just ignore data */ ++ break; ++ default: ++ DWC_ERROR("RX_STS_Q Interrupt: Unknown status %d\n", ++ grxsts.b.pktsts); ++ break; ++ } ++ ++ return 1; ++} ++ ++/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More ++ * data packets may be written to the FIFO for OUT transfers. More requests ++ * may be written to the non-periodic request queue for IN transfers. This ++ * interrupt is enabled only in Slave mode. */ ++int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n"); ++ dwc_otg_hcd_queue_transactions(dwc_otg_hcd, ++ DWC_OTG_TRANSACTION_NON_PERIODIC); ++ return 1; ++} ++ ++/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data ++ * packets may be written to the FIFO for OUT transfers. More requests may be ++ * written to the periodic request queue for IN transfers. This interrupt is ++ * enabled only in Slave mode. */ ++int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n"); ++ dwc_otg_hcd_queue_transactions(dwc_otg_hcd, ++ DWC_OTG_TRANSACTION_PERIODIC); ++ return 1; ++} ++ ++/** There are multiple conditions that can cause a port interrupt. This function ++ * determines which interrupt conditions have occurred and handles them ++ * appropriately. */ ++int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ int retval = 0; ++ hprt0_data_t hprt0; ++ hprt0_data_t hprt0_modify; ++ ++ hprt0.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0); ++ hprt0_modify.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0); ++ ++ /* Clear appropriate bits in HPRT0 to clear the interrupt bit in ++ * GINTSTS */ ++ ++ hprt0_modify.b.prtena = 0; ++ hprt0_modify.b.prtconndet = 0; ++ hprt0_modify.b.prtenchng = 0; ++ hprt0_modify.b.prtovrcurrchng = 0; ++ ++ /* Port Connect Detected ++ * Set flag and clear if detected */ ++ if (dwc_otg_hcd->core_if->hibernation_suspend == 1) { ++ // Dont modify port status if we are in hibernation state ++ hprt0_modify.b.prtconndet = 1; ++ hprt0_modify.b.prtenchng = 1; ++ DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32); ++ hprt0.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0); ++ return retval; ++ } ++ ++ if (hprt0.b.prtconndet) { ++ /** @todo - check if steps performed in 'else' block should be perfromed regardles adp */ ++ if (dwc_otg_hcd->core_if->adp_enable && ++ dwc_otg_hcd->core_if->adp.vbuson_timer_started == 1) { ++ DWC_PRINTF("PORT CONNECT DETECTED ----------------\n"); ++ DWC_TIMER_CANCEL(dwc_otg_hcd->core_if->adp.vbuson_timer); ++ dwc_otg_hcd->core_if->adp.vbuson_timer_started = 0; ++ /* TODO - check if this is required, as ++ * host initialization was already performed ++ * after initial ADP probing ++ */ ++ /*dwc_otg_hcd->core_if->adp.vbuson_timer_started = 0; ++ dwc_otg_core_init(dwc_otg_hcd->core_if); ++ dwc_otg_enable_global_interrupts(dwc_otg_hcd->core_if); ++ cil_hcd_start(dwc_otg_hcd->core_if);*/ ++ } else { ++ ++ DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x " ++ "Port Connect Detected--\n", hprt0.d32); ++ dwc_otg_hcd->flags.b.port_connect_status_change = 1; ++ dwc_otg_hcd->flags.b.port_connect_status = 1; ++ hprt0_modify.b.prtconndet = 1; ++ ++ /* B-Device has connected, Delete the connection timer. */ ++ DWC_TIMER_CANCEL(dwc_otg_hcd->conn_timer); ++ } ++ /* The Hub driver asserts a reset when it sees port connect ++ * status change flag */ ++ retval |= 1; ++ } ++ ++ /* Port Enable Changed ++ * Clear if detected - Set internal flag if disabled */ ++ if (hprt0.b.prtenchng) { ++ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x " ++ "Port Enable Changed--\n", hprt0.d32); ++ hprt0_modify.b.prtenchng = 1; ++ if (hprt0.b.prtena == 1) { ++ hfir_data_t hfir; ++ int do_reset = 0; ++ dwc_otg_core_params_t *params = ++ dwc_otg_hcd->core_if->core_params; ++ dwc_otg_core_global_regs_t *global_regs = ++ dwc_otg_hcd->core_if->core_global_regs; ++ dwc_otg_host_if_t *host_if = ++ dwc_otg_hcd->core_if->host_if; ++ ++ /* Every time when port enables calculate ++ * HFIR.FrInterval ++ */ ++ hfir.d32 = DWC_READ_REG32(&host_if->host_global_regs->hfir); ++ hfir.b.frint = calc_frame_interval(dwc_otg_hcd->core_if); ++ DWC_WRITE_REG32(&host_if->host_global_regs->hfir, hfir.d32); ++ ++ /* Check if we need to adjust the PHY clock speed for ++ * low power and adjust it */ ++ if (params->host_support_fs_ls_low_power) { ++ gusbcfg_data_t usbcfg; ++ ++ usbcfg.d32 = ++ DWC_READ_REG32(&global_regs->gusbcfg); ++ ++ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED ++ || hprt0.b.prtspd == ++ DWC_HPRT0_PRTSPD_FULL_SPEED) { ++ /* ++ * Low power ++ */ ++ hcfg_data_t hcfg; ++ if (usbcfg.b.phylpwrclksel == 0) { ++ /* Set PHY low power clock select for FS/LS devices */ ++ usbcfg.b.phylpwrclksel = 1; ++ DWC_WRITE_REG32 ++ (&global_regs->gusbcfg, ++ usbcfg.d32); ++ do_reset = 1; ++ } ++ ++ hcfg.d32 = ++ DWC_READ_REG32 ++ (&host_if->host_global_regs->hcfg); ++ ++ if (hprt0.b.prtspd == ++ DWC_HPRT0_PRTSPD_LOW_SPEED ++ && params->host_ls_low_power_phy_clk ++ == ++ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ) ++ { ++ /* 6 MHZ */ ++ DWC_DEBUGPL(DBG_CIL, ++ "FS_PHY programming HCFG to 6 MHz (Low Power)\n"); ++ if (hcfg.b.fslspclksel != ++ DWC_HCFG_6_MHZ) { ++ hcfg.b.fslspclksel = ++ DWC_HCFG_6_MHZ; ++ DWC_WRITE_REG32 ++ (&host_if->host_global_regs->hcfg, ++ hcfg.d32); ++ do_reset = 1; ++ } ++ } else { ++ /* 48 MHZ */ ++ DWC_DEBUGPL(DBG_CIL, ++ "FS_PHY programming HCFG to 48 MHz ()\n"); ++ if (hcfg.b.fslspclksel != ++ DWC_HCFG_48_MHZ) { ++ hcfg.b.fslspclksel = ++ DWC_HCFG_48_MHZ; ++ DWC_WRITE_REG32 ++ (&host_if->host_global_regs->hcfg, ++ hcfg.d32); ++ do_reset = 1; ++ } ++ } ++ } else { ++ /* ++ * Not low power ++ */ ++ if (usbcfg.b.phylpwrclksel == 1) { ++ usbcfg.b.phylpwrclksel = 0; ++ DWC_WRITE_REG32 ++ (&global_regs->gusbcfg, ++ usbcfg.d32); ++ do_reset = 1; ++ } ++ } ++ ++ if (do_reset) { ++ DWC_TASK_SCHEDULE(dwc_otg_hcd->reset_tasklet); ++ } ++ } ++ ++ if (!do_reset) { ++ /* Port has been enabled set the reset change flag */ ++ dwc_otg_hcd->flags.b.port_reset_change = 1; ++ } ++ } else { ++ dwc_otg_hcd->flags.b.port_enable_change = 1; ++ } ++ retval |= 1; ++ } ++ ++ /** Overcurrent Change Interrupt */ ++ if (hprt0.b.prtovrcurrchng) { ++ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x " ++ "Port Overcurrent Changed--\n", hprt0.d32); ++ dwc_otg_hcd->flags.b.port_over_current_change = 1; ++ hprt0_modify.b.prtovrcurrchng = 1; ++ retval |= 1; ++ } ++ ++ /* Clear Port Interrupts */ ++ DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32); ++ ++ return retval; ++} ++ ++/** This interrupt indicates that one or more host channels has a pending ++ * interrupt. There are multiple conditions that can cause each host channel ++ * interrupt. This function determines which conditions have occurred for each ++ * host channel interrupt and handles them appropriately. */ ++int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ int i; ++ int retval = 0; ++ haint_data_t haint; ++ ++ /* Clear appropriate bits in HCINTn to clear the interrupt bit in ++ * GINTSTS */ ++ ++ haint.d32 = dwc_otg_read_host_all_channels_intr(dwc_otg_hcd->core_if); ++ ++ for (i = 0; i < dwc_otg_hcd->core_if->core_params->host_channels; i++) { ++ if (haint.b2.chint & (1 << i)) { ++ retval |= dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd, i); ++ } ++ } ++ ++ return retval; ++} ++ ++/** ++ * Gets the actual length of a transfer after the transfer halts. _halt_status ++ * holds the reason for the halt. ++ * ++ * For IN transfers where halt_status is DWC_OTG_HC_XFER_COMPLETE, ++ * *short_read is set to 1 upon return if less than the requested ++ * number of bytes were transferred. Otherwise, *short_read is set to 0 upon ++ * return. short_read may also be NULL on entry, in which case it remains ++ * unchanged. ++ */ ++static uint32_t get_actual_xfer_length(dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_halt_status_e halt_status, ++ int *short_read) ++{ ++ hctsiz_data_t hctsiz; ++ uint32_t length; ++ ++ if (short_read != NULL) { ++ *short_read = 0; ++ } ++ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); ++ ++ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) { ++ if (hc->ep_is_in) { ++ length = hc->xfer_len - hctsiz.b.xfersize; ++ if (short_read != NULL) { ++ *short_read = (hctsiz.b.xfersize != 0); ++ } ++ } else if (hc->qh->do_split) { ++ length = qtd->ssplit_out_xfer_count; ++ } else { ++ length = hc->xfer_len; ++ } ++ } else { ++ /* ++ * Must use the hctsiz.pktcnt field to determine how much data ++ * has been transferred. This field reflects the number of ++ * packets that have been transferred via the USB. This is ++ * always an integral number of packets if the transfer was ++ * halted before its normal completion. (Can't use the ++ * hctsiz.xfersize field because that reflects the number of ++ * bytes transferred via the AHB, not the USB). ++ */ ++ length = ++ (hc->start_pkt_count - hctsiz.b.pktcnt) * hc->max_packet; ++ } ++ ++ return length; ++} ++ ++/** ++ * Updates the state of the URB after a Transfer Complete interrupt on the ++ * host channel. Updates the actual_length field of the URB based on the ++ * number of bytes transferred via the host channel. Sets the URB status ++ * if the data transfer is finished. ++ * ++ * @return 1 if the data transfer specified by the URB is completely finished, ++ * 0 otherwise. ++ */ ++static int update_urb_state_xfer_comp(dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_hcd_urb_t * urb, ++ dwc_otg_qtd_t * qtd) ++{ ++ int xfer_done = 0; ++ int short_read = 0; ++ ++ int xfer_length; ++ ++ xfer_length = get_actual_xfer_length(hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_COMPLETE, ++ &short_read); ++ ++ ++ /* non DWORD-aligned buffer case handling. */ ++ if (hc->align_buff && xfer_length && hc->ep_is_in) { ++ dwc_memcpy(urb->buf + urb->actual_length, hc->qh->dw_align_buf, ++ xfer_length); ++ } ++ ++ urb->actual_length += xfer_length; ++ ++ if (xfer_length && (hc->ep_type == DWC_OTG_EP_TYPE_BULK) && ++ (urb->flags & URB_SEND_ZERO_PACKET) ++ && (urb->actual_length == urb->length) ++ && !(urb->length % hc->max_packet)) { ++ xfer_done = 0; ++ } else if (short_read || urb->actual_length >= urb->length) { ++ xfer_done = 1; ++ urb->status = 0; ++ } ++ ++#ifdef DEBUG ++ { ++ hctsiz_data_t hctsiz; ++ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); ++ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n", ++ __func__, (hc->ep_is_in ? "IN" : "OUT"), ++ hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " hc->xfer_len %d\n", hc->xfer_len); ++ DWC_DEBUGPL(DBG_HCDV, " hctsiz.xfersize %d\n", ++ hctsiz.b.xfersize); ++ DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n", ++ urb->length); ++ DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", ++ urb->actual_length); ++ DWC_DEBUGPL(DBG_HCDV, " short_read %d, xfer_done %d\n", ++ short_read, xfer_done); ++ } ++#endif ++ ++ return xfer_done; ++} ++ ++/* ++ * Save the starting data toggle for the next transfer. The data toggle is ++ * saved in the QH for non-control transfers and it's saved in the QTD for ++ * control transfers. ++ */ ++void dwc_otg_hcd_save_data_toggle(dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, dwc_otg_qtd_t * qtd) ++{ ++ hctsiz_data_t hctsiz; ++ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); ++ ++ if (hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) { ++ dwc_otg_qh_t *qh = hc->qh; ++ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) { ++ qh->data_toggle = DWC_OTG_HC_PID_DATA0; ++ } else { ++ qh->data_toggle = DWC_OTG_HC_PID_DATA1; ++ } ++ } else { ++ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) { ++ qtd->data_toggle = DWC_OTG_HC_PID_DATA0; ++ } else { ++ qtd->data_toggle = DWC_OTG_HC_PID_DATA1; ++ } ++ } ++} ++ ++/** ++ * Updates the state of an Isochronous URB when the transfer is stopped for ++ * any reason. The fields of the current entry in the frame descriptor array ++ * are set based on the transfer state and the input _halt_status. Completes ++ * the Isochronous URB if all the URB frames have been completed. ++ * ++ * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be ++ * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE. ++ */ ++static dwc_otg_halt_status_e ++update_isoc_urb_state(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd, dwc_otg_halt_status_e halt_status) ++{ ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ dwc_otg_halt_status_e ret_val = halt_status; ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc; ++ ++ frame_desc = &urb->iso_descs[qtd->isoc_frame_index]; ++ switch (halt_status) { ++ case DWC_OTG_HC_XFER_COMPLETE: ++ frame_desc->status = 0; ++ frame_desc->actual_length = ++ get_actual_xfer_length(hc, hc_regs, qtd, halt_status, NULL); ++ ++ /* non DWORD-aligned buffer case handling. */ ++ if (hc->align_buff && frame_desc->actual_length && hc->ep_is_in) { ++ dwc_memcpy(urb->buf + frame_desc->offset + qtd->isoc_split_offset, ++ hc->qh->dw_align_buf, frame_desc->actual_length); ++ } ++ ++ break; ++ case DWC_OTG_HC_XFER_FRAME_OVERRUN: ++ urb->error_count++; ++ if (hc->ep_is_in) { ++ frame_desc->status = -DWC_E_NO_STREAM_RES; ++ } else { ++ frame_desc->status = -DWC_E_COMMUNICATION; ++ } ++ frame_desc->actual_length = 0; ++ break; ++ case DWC_OTG_HC_XFER_BABBLE_ERR: ++ urb->error_count++; ++ frame_desc->status = -DWC_E_OVERFLOW; ++ /* Don't need to update actual_length in this case. */ ++ break; ++ case DWC_OTG_HC_XFER_XACT_ERR: ++ urb->error_count++; ++ frame_desc->status = -DWC_E_PROTOCOL; ++ frame_desc->actual_length = ++ get_actual_xfer_length(hc, hc_regs, qtd, halt_status, NULL); ++ ++ /* non DWORD-aligned buffer case handling. */ ++ if (hc->align_buff && frame_desc->actual_length && hc->ep_is_in) { ++ dwc_memcpy(urb->buf + frame_desc->offset + qtd->isoc_split_offset, ++ hc->qh->dw_align_buf, frame_desc->actual_length); ++ } ++ /* Skip whole frame */ ++ if (hc->qh->do_split && (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && ++ hc->ep_is_in && hcd->core_if->dma_enable) { ++ qtd->complete_split = 0; ++ qtd->isoc_split_offset = 0; ++ } ++ ++ break; ++ default: ++ DWC_ASSERT(1, "Unhandled _halt_status (%d)\n", halt_status); ++ break; ++ } ++ if (++qtd->isoc_frame_index == urb->packet_count) { ++ /* ++ * urb->status is not used for isoc transfers. ++ * The individual frame_desc statuses are used instead. ++ */ ++ hcd->fops->complete(hcd, urb->priv, urb, 0); ++ ret_val = DWC_OTG_HC_XFER_URB_COMPLETE; ++ } else { ++ ret_val = DWC_OTG_HC_XFER_COMPLETE; ++ } ++ return ret_val; ++} ++ ++/** ++ * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic ++ * QHs, removes the QH from the active non-periodic schedule. If any QTDs are ++ * still linked to the QH, the QH is added to the end of the inactive ++ * non-periodic schedule. For periodic QHs, removes the QH from the periodic ++ * schedule if no more QTDs are linked to the QH. ++ */ ++static void deactivate_qh(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, int free_qtd) ++{ ++ int continue_split = 0; ++ dwc_otg_qtd_t *qtd; ++ ++ DWC_DEBUGPL(DBG_HCDV, " %s(%p,%p,%d)\n", __func__, hcd, qh, free_qtd); ++ ++ qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); ++ ++ if (qtd->complete_split) { ++ continue_split = 1; ++ } else if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID || ++ qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END) { ++ continue_split = 1; ++ } ++ ++ if (free_qtd) { ++ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); ++ continue_split = 0; ++ } ++ ++ qh->channel = NULL; ++ dwc_otg_hcd_qh_deactivate(hcd, qh, continue_split); ++} ++ ++/** ++ * Releases a host channel for use by other transfers. Attempts to select and ++ * queue more transactions since at least one host channel is available. ++ * ++ * @param hcd The HCD state structure. ++ * @param hc The host channel to release. ++ * @param qtd The QTD associated with the host channel. This QTD may be freed ++ * if the transfer is complete or an error has occurred. ++ * @param halt_status Reason the channel is being released. This status ++ * determines the actions taken by this function. ++ */ ++static void release_channel(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_halt_status_e halt_status) ++{ ++ dwc_otg_transaction_type_e tr_type; ++ int free_qtd; ++ dwc_irqflags_t flags; ++ dwc_spinlock_t *channel_lock = DWC_SPINLOCK_ALLOC(); ++ ++ DWC_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status %d, xfer_len %d\n", ++ __func__, hc->hc_num, halt_status, hc->xfer_len); ++ ++ switch (halt_status) { ++ case DWC_OTG_HC_XFER_URB_COMPLETE: ++ free_qtd = 1; ++ break; ++ case DWC_OTG_HC_XFER_AHB_ERR: ++ case DWC_OTG_HC_XFER_STALL: ++ case DWC_OTG_HC_XFER_BABBLE_ERR: ++ free_qtd = 1; ++ break; ++ case DWC_OTG_HC_XFER_XACT_ERR: ++ if (qtd->error_count >= 3) { ++ DWC_DEBUGPL(DBG_HCDV, ++ " Complete URB with transaction error\n"); ++ free_qtd = 1; ++ qtd->urb->status = -DWC_E_PROTOCOL; ++ hcd->fops->complete(hcd, qtd->urb->priv, ++ qtd->urb, -DWC_E_PROTOCOL); ++ } else { ++ free_qtd = 0; ++ } ++ break; ++ case DWC_OTG_HC_XFER_URB_DEQUEUE: ++ /* ++ * The QTD has already been removed and the QH has been ++ * deactivated. Don't want to do anything except release the ++ * host channel and try to queue more transfers. ++ */ ++ goto cleanup; ++ case DWC_OTG_HC_XFER_NO_HALT_STATUS: ++ free_qtd = 0; ++ break; ++ case DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE: ++ DWC_DEBUGPL(DBG_HCDV, ++ " Complete URB with I/O error\n"); ++ free_qtd = 1; ++ qtd->urb->status = -DWC_E_IO; ++ hcd->fops->complete(hcd, qtd->urb->priv, ++ qtd->urb, -DWC_E_IO); ++ break; ++ default: ++ free_qtd = 0; ++ break; ++ } ++ ++ deactivate_qh(hcd, hc->qh, free_qtd); ++ ++cleanup: ++ /* ++ * Release the host channel for use by other transfers. The cleanup ++ * function clears the channel interrupt enables and conditions, so ++ * there's no need to clear the Channel Halted interrupt separately. ++ */ ++ dwc_otg_hc_cleanup(hcd->core_if, hc); ++ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry); ++ ++ if (!microframe_schedule) { ++ switch (hc->ep_type) { ++ case DWC_OTG_EP_TYPE_CONTROL: ++ case DWC_OTG_EP_TYPE_BULK: ++ hcd->non_periodic_channels--; ++ break; ++ ++ default: ++ /* ++ * Don't release reservations for periodic channels here. ++ * That's done when a periodic transfer is descheduled (i.e. ++ * when the QH is removed from the periodic schedule). ++ */ ++ break; ++ } ++ } else { ++ ++ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); ++ hcd->available_host_channels++; ++ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); ++ } ++ ++ /* Try to queue more transfers now that there's a free channel. */ ++ tr_type = dwc_otg_hcd_select_transactions(hcd); ++ if (tr_type != DWC_OTG_TRANSACTION_NONE) { ++ dwc_otg_hcd_queue_transactions(hcd, tr_type); ++ } ++ DWC_SPINLOCK_FREE(channel_lock); ++} ++ ++/** ++ * Halts a host channel. If the channel cannot be halted immediately because ++ * the request queue is full, this function ensures that the FIFO empty ++ * interrupt for the appropriate queue is enabled so that the halt request can ++ * be queued when there is space in the request queue. ++ * ++ * This function may also be called in DMA mode. In that case, the channel is ++ * simply released since the core always halts the channel automatically in ++ * DMA mode. ++ */ ++static void halt_channel(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_qtd_t * qtd, dwc_otg_halt_status_e halt_status) ++{ ++ if (hcd->core_if->dma_enable) { ++ release_channel(hcd, hc, qtd, halt_status); ++ return; ++ } ++ ++ /* Slave mode processing... */ ++ dwc_otg_hc_halt(hcd->core_if, hc, halt_status); ++ ++ if (hc->halt_on_queue) { ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ dwc_otg_core_global_regs_t *global_regs; ++ global_regs = hcd->core_if->core_global_regs; ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || ++ hc->ep_type == DWC_OTG_EP_TYPE_BULK) { ++ /* ++ * Make sure the Non-periodic Tx FIFO empty interrupt ++ * is enabled so that the non-periodic schedule will ++ * be processed. ++ */ ++ gintmsk.b.nptxfempty = 1; ++ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32); ++ } else { ++ /* ++ * Move the QH from the periodic queued schedule to ++ * the periodic assigned schedule. This allows the ++ * halt to be queued when the periodic schedule is ++ * processed. ++ */ ++ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned, ++ &hc->qh->qh_list_entry); ++ ++ /* ++ * Make sure the Periodic Tx FIFO Empty interrupt is ++ * enabled so that the periodic schedule will be ++ * processed. ++ */ ++ gintmsk.b.ptxfempty = 1; ++ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32); ++ } ++ } ++} ++ ++/** ++ * Performs common cleanup for non-periodic transfers after a Transfer ++ * Complete interrupt. This function should be called after any endpoint type ++ * specific handling is finished to release the host channel. ++ */ ++static void complete_non_periodic_xfer(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_halt_status_e halt_status) ++{ ++ hcint_data_t hcint; ++ ++ qtd->error_count = 0; ++ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ if (hcint.b.nyet) { ++ /* ++ * Got a NYET on the last transaction of the transfer. This ++ * means that the endpoint should be in the PING state at the ++ * beginning of the next transfer. ++ */ ++ hc->qh->ping_state = 1; ++ clear_hc_int(hc_regs, nyet); ++ } ++ ++ /* ++ * Always halt and release the host channel to make it available for ++ * more transfers. There may still be more phases for a control ++ * transfer or more data packets for a bulk transfer at this point, ++ * but the host channel is still halted. A channel will be reassigned ++ * to the transfer when the non-periodic schedule is processed after ++ * the channel is released. This allows transactions to be queued ++ * properly via dwc_otg_hcd_queue_transactions, which also enables the ++ * Tx FIFO Empty interrupt if necessary. ++ */ ++ if (hc->ep_is_in) { ++ /* ++ * IN transfers in Slave mode require an explicit disable to ++ * halt the channel. (In DMA mode, this call simply releases ++ * the channel.) ++ */ ++ halt_channel(hcd, hc, qtd, halt_status); ++ } else { ++ /* ++ * The channel is automatically disabled by the core for OUT ++ * transfers in Slave mode. ++ */ ++ release_channel(hcd, hc, qtd, halt_status); ++ } ++} ++ ++/** ++ * Performs common cleanup for periodic transfers after a Transfer Complete ++ * interrupt. This function should be called after any endpoint type specific ++ * handling is finished to release the host channel. ++ */ ++static void complete_periodic_xfer(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_halt_status_e halt_status) ++{ ++ hctsiz_data_t hctsiz; ++ qtd->error_count = 0; ++ ++ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); ++ if (!hc->ep_is_in || hctsiz.b.pktcnt == 0) { ++ /* Core halts channel in these cases. */ ++ release_channel(hcd, hc, qtd, halt_status); ++ } else { ++ /* Flush any outstanding requests from the Tx queue. */ ++ halt_channel(hcd, hc, qtd, halt_status); ++ } ++} ++ ++static int32_t handle_xfercomp_isoc_split_in(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ uint32_t len; ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc; ++ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; ++ ++ len = get_actual_xfer_length(hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_COMPLETE, NULL); ++ ++ if (!len) { ++ qtd->complete_split = 0; ++ qtd->isoc_split_offset = 0; ++ return 0; ++ } ++ frame_desc->actual_length += len; ++ ++ if (hc->align_buff && len) ++ dwc_memcpy(qtd->urb->buf + frame_desc->offset + ++ qtd->isoc_split_offset, hc->qh->dw_align_buf, len); ++ qtd->isoc_split_offset += len; ++ ++ if (frame_desc->length == frame_desc->actual_length) { ++ frame_desc->status = 0; ++ qtd->isoc_frame_index++; ++ qtd->complete_split = 0; ++ qtd->isoc_split_offset = 0; ++ } ++ ++ if (qtd->isoc_frame_index == qtd->urb->packet_count) { ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); ++ } else { ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); ++ } ++ ++ return 1; /* Indicates that channel released */ ++} ++ ++/** ++ * Handles a host channel Transfer Complete interrupt. This handler may be ++ * called in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ int urb_xfer_done; ++ dwc_otg_halt_status_e halt_status = DWC_OTG_HC_XFER_COMPLETE; ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ int pipe_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info); ++ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "Transfer Complete--\n", hc->hc_num); ++ ++ if (hcd->core_if->dma_desc_enable) { ++ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, halt_status); ++ if (pipe_type == UE_ISOCHRONOUS) { ++ /* Do not disable the interrupt, just clear it */ ++ clear_hc_int(hc_regs, xfercomp); ++ return 1; ++ } ++ goto handle_xfercomp_done; ++ } ++ ++ /* ++ * Handle xfer complete on CSPLIT. ++ */ ++ ++ if (hc->qh->do_split) { ++ if ((hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && hc->ep_is_in ++ && hcd->core_if->dma_enable) { ++ if (qtd->complete_split ++ && handle_xfercomp_isoc_split_in(hcd, hc, hc_regs, ++ qtd)) ++ goto handle_xfercomp_done; ++ } else { ++ qtd->complete_split = 0; ++ } ++ } ++ ++ /* Update the QTD and URB states. */ ++ switch (pipe_type) { ++ case UE_CONTROL: ++ switch (qtd->control_phase) { ++ case DWC_OTG_CONTROL_SETUP: ++ if (urb->length > 0) { ++ qtd->control_phase = DWC_OTG_CONTROL_DATA; ++ } else { ++ qtd->control_phase = DWC_OTG_CONTROL_STATUS; ++ } ++ DWC_DEBUGPL(DBG_HCDV, ++ " Control setup transaction done\n"); ++ halt_status = DWC_OTG_HC_XFER_COMPLETE; ++ break; ++ case DWC_OTG_CONTROL_DATA:{ ++ urb_xfer_done = ++ update_urb_state_xfer_comp(hc, hc_regs, urb, ++ qtd); ++ if (urb_xfer_done) { ++ qtd->control_phase = ++ DWC_OTG_CONTROL_STATUS; ++ DWC_DEBUGPL(DBG_HCDV, ++ " Control data transfer done\n"); ++ } else { ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ } ++ halt_status = DWC_OTG_HC_XFER_COMPLETE; ++ break; ++ } ++ case DWC_OTG_CONTROL_STATUS: ++ DWC_DEBUGPL(DBG_HCDV, " Control transfer complete\n"); ++ if (urb->status == -DWC_E_IN_PROGRESS) { ++ urb->status = 0; ++ } ++ hcd->fops->complete(hcd, urb->priv, urb, urb->status); ++ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; ++ break; ++ } ++ ++ complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); ++ break; ++ case UE_BULK: ++ DWC_DEBUGPL(DBG_HCDV, " Bulk transfer complete\n"); ++ urb_xfer_done = ++ update_urb_state_xfer_comp(hc, hc_regs, urb, qtd); ++ if (urb_xfer_done) { ++ hcd->fops->complete(hcd, urb->priv, urb, urb->status); ++ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; ++ } else { ++ halt_status = DWC_OTG_HC_XFER_COMPLETE; ++ } ++ ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); ++ break; ++ case UE_INTERRUPT: ++ DWC_DEBUGPL(DBG_HCDV, " Interrupt transfer complete\n"); ++ urb_xfer_done = ++ update_urb_state_xfer_comp(hc, hc_regs, urb, qtd); ++ ++ /* ++ * Interrupt URB is done on the first transfer complete ++ * interrupt. ++ */ ++ if (urb_xfer_done) { ++ hcd->fops->complete(hcd, urb->priv, urb, urb->status); ++ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; ++ } else { ++ halt_status = DWC_OTG_HC_XFER_COMPLETE; ++ } ++ ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); ++ break; ++ case UE_ISOCHRONOUS: ++ DWC_DEBUGPL(DBG_HCDV, " Isochronous transfer complete\n"); ++ if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL) { ++ halt_status = ++ update_isoc_urb_state(hcd, hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_COMPLETE); ++ } ++ complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); ++ break; ++ } ++ ++handle_xfercomp_done: ++ disable_hc_int(hc_regs, xfercompl); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel STALL interrupt. This handler may be called in ++ * either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_stall_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ int pipe_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info); ++ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "STALL Received--\n", hc->hc_num); ++ ++ if (hcd->core_if->dma_desc_enable) { ++ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, DWC_OTG_HC_XFER_STALL); ++ goto handle_stall_done; ++ } ++ ++ if (pipe_type == UE_CONTROL) { ++ hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_PIPE); ++ } ++ ++ if (pipe_type == UE_BULK || pipe_type == UE_INTERRUPT) { ++ hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_PIPE); ++ /* ++ * USB protocol requires resetting the data toggle for bulk ++ * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT) ++ * setup command is issued to the endpoint. Anticipate the ++ * CLEAR_FEATURE command since a STALL has occurred and reset ++ * the data toggle now. ++ */ ++ hc->qh->data_toggle = 0; ++ } ++ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_STALL); ++ ++handle_stall_done: ++ disable_hc_int(hc_regs, stall); ++ ++ return 1; ++} ++ ++/* ++ * Updates the state of the URB when a transfer has been stopped due to an ++ * abnormal condition before the transfer completes. Modifies the ++ * actual_length field of the URB to reflect the number of bytes that have ++ * actually been transferred via the host channel. ++ */ ++static void update_urb_state_xfer_intr(dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_hcd_urb_t * urb, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_halt_status_e halt_status) ++{ ++ uint32_t bytes_transferred = get_actual_xfer_length(hc, hc_regs, qtd, ++ halt_status, NULL); ++ /* non DWORD-aligned buffer case handling. */ ++ if (hc->align_buff && bytes_transferred && hc->ep_is_in) { ++ dwc_memcpy(urb->buf + urb->actual_length, hc->qh->dw_align_buf, ++ bytes_transferred); ++ } ++ ++ urb->actual_length += bytes_transferred; ++ ++#ifdef DEBUG ++ { ++ hctsiz_data_t hctsiz; ++ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); ++ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n", ++ __func__, (hc->ep_is_in ? "IN" : "OUT"), ++ hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " hc->start_pkt_count %d\n", ++ hc->start_pkt_count); ++ DWC_DEBUGPL(DBG_HCDV, " hctsiz.pktcnt %d\n", hctsiz.b.pktcnt); ++ DWC_DEBUGPL(DBG_HCDV, " hc->max_packet %d\n", hc->max_packet); ++ DWC_DEBUGPL(DBG_HCDV, " bytes_transferred %d\n", ++ bytes_transferred); ++ DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", ++ urb->actual_length); ++ DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n", ++ urb->length); ++ } ++#endif ++} ++ ++/** ++ * Handles a host channel NAK interrupt. This handler may be called in either ++ * DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_nak_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "NAK Received--\n", hc->hc_num); ++ ++ /* ++ * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and ++ * interrupt. Re-start the SSPLIT transfer. ++ */ ++ if (hc->do_split) { ++ if (hc->complete_split) { ++ qtd->error_count = 0; ++ } ++ qtd->complete_split = 0; ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); ++ goto handle_nak_done; ++ } ++ ++ switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) { ++ case UE_CONTROL: ++ case UE_BULK: ++ if (hcd->core_if->dma_enable && hc->ep_is_in) { ++ /* ++ * NAK interrupts are enabled on bulk/control IN ++ * transfers in DMA mode for the sole purpose of ++ * resetting the error count after a transaction error ++ * occurs. The core will continue transferring data. ++ */ ++ qtd->error_count = 0; ++ goto handle_nak_done; ++ } ++ ++ /* ++ * NAK interrupts normally occur during OUT transfers in DMA ++ * or Slave mode. For IN transfers, more requests will be ++ * queued as request queue space is available. ++ */ ++ qtd->error_count = 0; ++ ++ if (!hc->qh->ping_state) { ++ update_urb_state_xfer_intr(hc, hc_regs, ++ qtd->urb, qtd, ++ DWC_OTG_HC_XFER_NAK); ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ ++ if (hc->speed == DWC_OTG_EP_SPEED_HIGH) ++ hc->qh->ping_state = 1; ++ } ++ ++ /* ++ * Halt the channel so the transfer can be re-started from ++ * the appropriate point or the PING protocol will ++ * start/continue. ++ */ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); ++ break; ++ case UE_INTERRUPT: ++ qtd->error_count = 0; ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); ++ break; ++ case UE_ISOCHRONOUS: ++ /* Should never get called for isochronous transfers. */ ++ DWC_ASSERT(1, "NACK interrupt for ISOC transfer\n"); ++ break; ++ } ++ ++handle_nak_done: ++ disable_hc_int(hc_regs, nak); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel ACK interrupt. This interrupt is enabled when ++ * performing the PING protocol in Slave mode, when errors occur during ++ * either Slave mode or DMA mode, and during Start Split transactions. ++ */ ++static int32_t handle_hc_ack_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "ACK Received--\n", hc->hc_num); ++ ++ if (hc->do_split) { ++ /* ++ * Handle ACK on SSPLIT. ++ * ACK should not occur in CSPLIT. ++ */ ++ if (!hc->ep_is_in && hc->data_pid_start != DWC_OTG_HC_PID_SETUP) { ++ qtd->ssplit_out_xfer_count = hc->xfer_len; ++ } ++ if (!(hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in)) { ++ /* Don't need complete for isochronous out transfers. */ ++ qtd->complete_split = 1; ++ } ++ ++ /* ISOC OUT */ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) { ++ switch (hc->xact_pos) { ++ case DWC_HCSPLIT_XACTPOS_ALL: ++ break; ++ case DWC_HCSPLIT_XACTPOS_END: ++ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL; ++ qtd->isoc_split_offset = 0; ++ break; ++ case DWC_HCSPLIT_XACTPOS_BEGIN: ++ case DWC_HCSPLIT_XACTPOS_MID: ++ /* ++ * For BEGIN or MID, calculate the length for ++ * the next microframe to determine the correct ++ * SSPLIT token, either MID or END. ++ */ ++ { ++ struct dwc_otg_hcd_iso_packet_desc ++ *frame_desc; ++ ++ frame_desc = ++ &qtd->urb-> ++ iso_descs[qtd->isoc_frame_index]; ++ qtd->isoc_split_offset += 188; ++ ++ if ((frame_desc->length - ++ qtd->isoc_split_offset) <= 188) { ++ qtd->isoc_split_pos = ++ DWC_HCSPLIT_XACTPOS_END; ++ } else { ++ qtd->isoc_split_pos = ++ DWC_HCSPLIT_XACTPOS_MID; ++ } ++ ++ } ++ break; ++ } ++ } else { ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK); ++ } ++ } else { ++ qtd->error_count = 0; ++ ++ if (hc->qh->ping_state) { ++ hc->qh->ping_state = 0; ++ /* ++ * Halt the channel so the transfer can be re-started ++ * from the appropriate point. This only happens in ++ * Slave mode. In DMA mode, the ping_state is cleared ++ * when the transfer is started because the core ++ * automatically executes the PING, then the transfer. ++ */ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK); ++ } ++ } ++ ++ /* ++ * If the ACK occurred when _not_ in the PING state, let the channel ++ * continue transferring data after clearing the error count. ++ */ ++ ++ disable_hc_int(hc_regs, ack); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel NYET interrupt. This interrupt should only occur on ++ * Bulk and Control OUT endpoints and for complete split transactions. If a ++ * NYET occurs at the same time as a Transfer Complete interrupt, it is ++ * handled in the xfercomp interrupt handler, not here. This handler may be ++ * called in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "NYET Received--\n", hc->hc_num); ++ ++ /* ++ * NYET on CSPLIT ++ * re-do the CSPLIT immediately on non-periodic ++ */ ++ if (hc->do_split && hc->complete_split) { ++ if (hc->ep_is_in && (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) ++ && hcd->core_if->dma_enable) { ++ qtd->complete_split = 0; ++ qtd->isoc_split_offset = 0; ++ if (++qtd->isoc_frame_index == qtd->urb->packet_count) { ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); ++ } ++ else ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); ++ goto handle_nyet_done; ++ } ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ int frnum = dwc_otg_hcd_get_frame_number(hcd); ++ ++ if (dwc_full_frame_num(frnum) != ++ dwc_full_frame_num(hc->qh->sched_frame)) { ++ /* ++ * No longer in the same full speed frame. ++ * Treat this as a transaction error. ++ */ ++#if 0 ++ /** @todo Fix system performance so this can ++ * be treated as an error. Right now complete ++ * splits cannot be scheduled precisely enough ++ * due to other system activity, so this error ++ * occurs regularly in Slave mode. ++ */ ++ qtd->error_count++; ++#endif ++ qtd->complete_split = 0; ++ halt_channel(hcd, hc, qtd, ++ DWC_OTG_HC_XFER_XACT_ERR); ++ /** @todo add support for isoc release */ ++ goto handle_nyet_done; ++ } ++ } ++ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET); ++ goto handle_nyet_done; ++ } ++ ++ hc->qh->ping_state = 1; ++ qtd->error_count = 0; ++ ++ update_urb_state_xfer_intr(hc, hc_regs, qtd->urb, qtd, ++ DWC_OTG_HC_XFER_NYET); ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ ++ /* ++ * Halt the channel and re-start the transfer so the PING ++ * protocol will start. ++ */ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET); ++ ++handle_nyet_done: ++ disable_hc_int(hc_regs, nyet); ++ return 1; ++} ++ ++/** ++ * Handles a host channel babble interrupt. This handler may be called in ++ * either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_babble_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "Babble Error--\n", hc->hc_num); ++ ++ if (hcd->core_if->dma_desc_enable) { ++ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, ++ DWC_OTG_HC_XFER_BABBLE_ERR); ++ goto handle_babble_done; ++ } ++ ++ if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { ++ hcd->fops->complete(hcd, qtd->urb->priv, ++ qtd->urb, -DWC_E_OVERFLOW); ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_BABBLE_ERR); ++ } else { ++ dwc_otg_halt_status_e halt_status; ++ halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_BABBLE_ERR); ++ halt_channel(hcd, hc, qtd, halt_status); ++ } ++ ++handle_babble_done: ++ disable_hc_int(hc_regs, bblerr); ++ return 1; ++} ++ ++/** ++ * Handles a host channel AHB error interrupt. This handler is only called in ++ * DMA mode. ++ */ ++static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ hcchar_data_t hcchar; ++ hcsplt_data_t hcsplt; ++ hctsiz_data_t hctsiz; ++ uint32_t hcdma; ++ char *pipetype, *speed; ++ ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "AHB Error--\n", hc->hc_num); ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt); ++ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); ++ hcdma = DWC_READ_REG32(&hc_regs->hcdma); ++ ++ DWC_ERROR("AHB ERROR, Channel %d\n", hc->hc_num); ++ DWC_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32); ++ DWC_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma); ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n"); ++ DWC_ERROR(" Device address: %d\n", ++ dwc_otg_hcd_get_dev_addr(&urb->pipe_info)); ++ DWC_ERROR(" Endpoint: %d, %s\n", ++ dwc_otg_hcd_get_ep_num(&urb->pipe_info), ++ (dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT")); ++ ++ switch (dwc_otg_hcd_get_pipe_type(&urb->pipe_info)) { ++ case UE_CONTROL: ++ pipetype = "CONTROL"; ++ break; ++ case UE_BULK: ++ pipetype = "BULK"; ++ break; ++ case UE_INTERRUPT: ++ pipetype = "INTERRUPT"; ++ break; ++ case UE_ISOCHRONOUS: ++ pipetype = "ISOCHRONOUS"; ++ break; ++ default: ++ pipetype = "UNKNOWN"; ++ break; ++ } ++ ++ DWC_ERROR(" Endpoint type: %s\n", pipetype); ++ ++ switch (hc->speed) { ++ case DWC_OTG_EP_SPEED_HIGH: ++ speed = "HIGH"; ++ break; ++ case DWC_OTG_EP_SPEED_FULL: ++ speed = "FULL"; ++ break; ++ case DWC_OTG_EP_SPEED_LOW: ++ speed = "LOW"; ++ break; ++ default: ++ speed = "UNKNOWN"; ++ break; ++ }; ++ ++ DWC_ERROR(" Speed: %s\n", speed); ++ ++ DWC_ERROR(" Max packet size: %d\n", ++ dwc_otg_hcd_get_mps(&urb->pipe_info)); ++ DWC_ERROR(" Data buffer length: %d\n", urb->length); ++ DWC_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n", ++ urb->buf, (void *)urb->dma); ++ DWC_ERROR(" Setup buffer: %p, Setup DMA: %p\n", ++ urb->setup_packet, (void *)urb->setup_dma); ++ DWC_ERROR(" Interval: %d\n", urb->interval); ++ ++ /* Core haltes the channel for Descriptor DMA mode */ ++ if (hcd->core_if->dma_desc_enable) { ++ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, ++ DWC_OTG_HC_XFER_AHB_ERR); ++ goto handle_ahberr_done; ++ } ++ ++ hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_IO); ++ ++ /* ++ * Force a channel halt. Don't call halt_channel because that won't ++ * write to the HCCHARn register in DMA mode to force the halt. ++ */ ++ dwc_otg_hc_halt(hcd->core_if, hc, DWC_OTG_HC_XFER_AHB_ERR); ++handle_ahberr_done: ++ disable_hc_int(hc_regs, ahberr); ++ return 1; ++} ++ ++/** ++ * Handles a host channel transaction error interrupt. This handler may be ++ * called in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "Transaction Error--\n", hc->hc_num); ++ ++ if (hcd->core_if->dma_desc_enable) { ++ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, ++ DWC_OTG_HC_XFER_XACT_ERR); ++ goto handle_xacterr_done; ++ } ++ ++ switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) { ++ case UE_CONTROL: ++ case UE_BULK: ++ qtd->error_count++; ++ if (!hc->qh->ping_state) { ++ ++ update_urb_state_xfer_intr(hc, hc_regs, ++ qtd->urb, qtd, ++ DWC_OTG_HC_XFER_XACT_ERR); ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ if (!hc->ep_is_in && hc->speed == DWC_OTG_EP_SPEED_HIGH) { ++ hc->qh->ping_state = 1; ++ } ++ } ++ ++ /* ++ * Halt the channel so the transfer can be re-started from ++ * the appropriate point or the PING protocol will start. ++ */ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); ++ break; ++ case UE_INTERRUPT: ++ qtd->error_count++; ++ if (hc->do_split && hc->complete_split) { ++ qtd->complete_split = 0; ++ } ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); ++ break; ++ case UE_ISOCHRONOUS: ++ { ++ dwc_otg_halt_status_e halt_status; ++ halt_status = ++ update_isoc_urb_state(hcd, hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_XACT_ERR); ++ ++ halt_channel(hcd, hc, qtd, halt_status); ++ } ++ break; ++ } ++handle_xacterr_done: ++ disable_hc_int(hc_regs, xacterr); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel frame overrun interrupt. This handler may be called ++ * in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "Frame Overrun--\n", hc->hc_num); ++ ++ switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) { ++ case UE_CONTROL: ++ case UE_BULK: ++ break; ++ case UE_INTERRUPT: ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN); ++ break; ++ case UE_ISOCHRONOUS: ++ { ++ dwc_otg_halt_status_e halt_status; ++ halt_status = ++ update_isoc_urb_state(hcd, hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_FRAME_OVERRUN); ++ ++ halt_channel(hcd, hc, qtd, halt_status); ++ } ++ break; ++ } ++ ++ disable_hc_int(hc_regs, frmovrun); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel data toggle error interrupt. This handler may be ++ * called in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "Data Toggle Error--\n", hc->hc_num); ++ ++ if (hc->ep_is_in) { ++ qtd->error_count = 0; ++ } else { ++ DWC_ERROR("Data Toggle Error on OUT transfer," ++ "channel %d\n", hc->hc_num); ++ } ++ ++ disable_hc_int(hc_regs, datatglerr); ++ ++ return 1; ++} ++ ++#ifdef DEBUG ++/** ++ * This function is for debug only. It checks that a valid halt status is set ++ * and that HCCHARn.chdis is clear. If there's a problem, corrective action is ++ * taken and a warning is issued. ++ * @return 1 if halt status is ok, 0 otherwise. ++ */ ++static inline int halt_status_ok(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ hcchar_data_t hcchar; ++ hctsiz_data_t hctsiz; ++ hcint_data_t hcint; ++ hcintmsk_data_t hcintmsk; ++ hcsplt_data_t hcsplt; ++ ++ if (hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) { ++ /* ++ * This code is here only as a check. This condition should ++ * never happen. Ignore the halt if it does occur. ++ */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk); ++ hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt); ++ DWC_WARN ++ ("%s: hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS, " ++ "channel %d, hcchar 0x%08x, hctsiz 0x%08x, " ++ "hcint 0x%08x, hcintmsk 0x%08x, " ++ "hcsplt 0x%08x, qtd->complete_split %d\n", __func__, ++ hc->hc_num, hcchar.d32, hctsiz.d32, hcint.d32, ++ hcintmsk.d32, hcsplt.d32, qtd->complete_split); ++ ++ DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n", ++ __func__, hc->hc_num); ++ DWC_WARN("\n"); ++ clear_hc_int(hc_regs, chhltd); ++ return 0; ++ } ++ ++ /* ++ * This code is here only as a check. hcchar.chdis should ++ * never be set when the halt interrupt occurs. Halt the ++ * channel again if it does occur. ++ */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ if (hcchar.b.chdis) { ++ DWC_WARN("%s: hcchar.chdis set unexpectedly, " ++ "hcchar 0x%08x, trying to halt again\n", ++ __func__, hcchar.d32); ++ clear_hc_int(hc_regs, chhltd); ++ hc->halt_pending = 0; ++ halt_channel(hcd, hc, qtd, hc->halt_status); ++ return 0; ++ } ++ ++ return 1; ++} ++#endif ++ ++/** ++ * Handles a host Channel Halted interrupt in DMA mode. This handler ++ * determines the reason the channel halted and proceeds accordingly. ++ */ ++static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ hcint_data_t hcint; ++ hcintmsk_data_t hcintmsk; ++ int out_nak_enh = 0; ++ ++ /* For core with OUT NAK enhancement, the flow for high- ++ * speed CONTROL/BULK OUT is handled a little differently. ++ */ ++ if (hcd->core_if->snpsid >= OTG_CORE_REV_2_71a) { ++ if (hc->speed == DWC_OTG_EP_SPEED_HIGH && !hc->ep_is_in && ++ (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || ++ hc->ep_type == DWC_OTG_EP_TYPE_BULK)) { ++ out_nak_enh = 1; ++ } ++ } ++ ++ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE || ++ (hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR ++ && !hcd->core_if->dma_desc_enable)) { ++ /* ++ * Just release the channel. A dequeue can happen on a ++ * transfer timeout. In the case of an AHB Error, the channel ++ * was forced to halt because there's no way to gracefully ++ * recover. ++ */ ++ if (hcd->core_if->dma_desc_enable) ++ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, ++ hc->halt_status); ++ else ++ release_channel(hcd, hc, qtd, hc->halt_status); ++ return; ++ } ++ ++ /* Read the HCINTn register to determine the cause for the halt. */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk); ++ ++ if (hcint.b.xfercomp) { ++ /** @todo This is here because of a possible hardware bug. Spec ++ * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT ++ * interrupt w/ACK bit set should occur, but I only see the ++ * XFERCOMP bit, even with it masked out. This is a workaround ++ * for that behavior. Should fix this when hardware is fixed. ++ */ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) { ++ handle_hc_ack_intr(hcd, hc, hc_regs, qtd); ++ } ++ handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.stall) { ++ handle_hc_stall_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.xacterr && !hcd->core_if->dma_desc_enable) { ++ if (out_nak_enh) { ++ if (hcint.b.nyet || hcint.b.nak || hcint.b.ack) { ++ DWC_DEBUGPL(DBG_HCD, "XactErr with NYET/NAK/ACK\n"); ++ qtd->error_count = 0; ++ } else { ++ DWC_DEBUGPL(DBG_HCD, "XactErr without NYET/NAK/ACK\n"); ++ } ++ } ++ ++ /* ++ * Must handle xacterr before nak or ack. Could get a xacterr ++ * at the same time as either of these on a BULK/CONTROL OUT ++ * that started with a PING. The xacterr takes precedence. ++ */ ++ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.xcs_xact && hcd->core_if->dma_desc_enable) { ++ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.ahberr && hcd->core_if->dma_desc_enable) { ++ handle_hc_ahberr_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.bblerr) { ++ handle_hc_babble_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.frmovrun) { ++ handle_hc_frmovrun_intr(hcd, hc, hc_regs, qtd); ++ } else if (!out_nak_enh) { ++ if (hcint.b.nyet) { ++ /* ++ * Must handle nyet before nak or ack. Could get a nyet at the ++ * same time as either of those on a BULK/CONTROL OUT that ++ * started with a PING. The nyet takes precedence. ++ */ ++ handle_hc_nyet_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.nak && !hcintmsk.b.nak) { ++ /* ++ * If nak is not masked, it's because a non-split IN transfer ++ * is in an error state. In that case, the nak is handled by ++ * the nak interrupt handler, not here. Handle nak here for ++ * BULK/CONTROL OUT transfers, which halt on a NAK to allow ++ * rewinding the buffer pointer. ++ */ ++ handle_hc_nak_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.ack && !hcintmsk.b.ack) { ++ /* ++ * If ack is not masked, it's because a non-split IN transfer ++ * is in an error state. In that case, the ack is handled by ++ * the ack interrupt handler, not here. Handle ack here for ++ * split transfers. Start splits halt on ACK. ++ */ ++ handle_hc_ack_intr(hcd, hc, hc_regs, qtd); ++ } else { ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * A periodic transfer halted with no other channel ++ * interrupts set. Assume it was halted by the core ++ * because it could not be completed in its scheduled ++ * (micro)frame. ++ */ ++#ifdef DEBUG ++ DWC_PRINTF ++ ("%s: Halt channel %d (assume incomplete periodic transfer)\n", ++ __func__, hc->hc_num); ++#endif ++ halt_channel(hcd, hc, qtd, ++ DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE); ++ } else { ++ DWC_ERROR ++ ("%s: Channel %d, DMA Mode -- ChHltd set, but reason " ++ "for halting is unknown, hcint 0x%08x, intsts 0x%08x\n", ++ __func__, hc->hc_num, hcint.d32, ++ DWC_READ_REG32(&hcd-> ++ core_if->core_global_regs-> ++ gintsts)); ++ } ++ ++ } ++ } else { ++ DWC_PRINTF("NYET/NAK/ACK/other in non-error case, 0x%08x\n", ++ hcint.d32); ++ } ++} ++ ++/** ++ * Handles a host channel Channel Halted interrupt. ++ * ++ * In slave mode, this handler is called only when the driver specifically ++ * requests a halt. This occurs during handling other host channel interrupts ++ * (e.g. nak, xacterr, stall, nyet, etc.). ++ * ++ * In DMA mode, this is the interrupt that occurs when the core has finished ++ * processing a transfer on a channel. Other host channel interrupts (except ++ * ahberr) are disabled in DMA mode. ++ */ ++static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "Channel Halted--\n", hc->hc_num); ++ ++ if (hcd->core_if->dma_enable) { ++ handle_hc_chhltd_intr_dma(hcd, hc, hc_regs, qtd); ++ } else { ++#ifdef DEBUG ++ if (!halt_status_ok(hcd, hc, hc_regs, qtd)) { ++ return 1; ++ } ++#endif ++ release_channel(hcd, hc, qtd, hc->halt_status); ++ } ++ ++ return 1; ++} ++ ++/** Handles interrupt for a specific Host Channel */ ++int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * dwc_otg_hcd, uint32_t num) ++{ ++ int retval = 0; ++ hcint_data_t hcint; ++ hcintmsk_data_t hcintmsk; ++ dwc_hc_t *hc; ++ dwc_otg_hc_regs_t *hc_regs; ++ dwc_otg_qtd_t *qtd; ++ ++ DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", num); ++ ++ hc = dwc_otg_hcd->hc_ptr_array[num]; ++ hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[num]; ++ qtd = DWC_CIRCLEQ_FIRST(&hc->qh->qtd_list); ++ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk); ++ DWC_DEBUGPL(DBG_HCDV, ++ " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n", ++ hcint.d32, hcintmsk.d32, (hcint.d32 & hcintmsk.d32)); ++ hcint.d32 = hcint.d32 & hcintmsk.d32; ++ ++ if (!dwc_otg_hcd->core_if->dma_enable) { ++ if (hcint.b.chhltd && hcint.d32 != 0x2) { ++ hcint.b.chhltd = 0; ++ } ++ } ++ ++ if (hcint.b.xfercomp) { ++ retval |= ++ handle_hc_xfercomp_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ /* ++ * If NYET occurred at same time as Xfer Complete, the NYET is ++ * handled by the Xfer Complete interrupt handler. Don't want ++ * to call the NYET interrupt handler in this case. ++ */ ++ hcint.b.nyet = 0; ++ } ++ if (hcint.b.chhltd) { ++ retval |= handle_hc_chhltd_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.ahberr) { ++ retval |= handle_hc_ahberr_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.stall) { ++ retval |= handle_hc_stall_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.nak) { ++ retval |= handle_hc_nak_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.ack) { ++ retval |= handle_hc_ack_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.nyet) { ++ retval |= handle_hc_nyet_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.xacterr) { ++ retval |= handle_hc_xacterr_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.bblerr) { ++ retval |= handle_hc_babble_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.frmovrun) { ++ retval |= ++ handle_hc_frmovrun_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.datatglerr) { ++ retval |= ++ handle_hc_datatglerr_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ ++ return retval; ++} ++ ++#endif /* DWC_DEVICE_ONLY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c +@@ -0,0 +1,893 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_linux.c $ ++ * $Revision: #20 $ ++ * $Date: 2011/10/26 $ ++ * $Change: 1872981 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++ ++/** ++ * @file ++ * ++ * This file contains the implementation of the HCD. In Linux, the HCD ++ * implements the hc_driver API. ++ */ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/init.h> ++#include <linux/device.h> ++#include <linux/errno.h> ++#include <linux/list.h> ++#include <linux/interrupt.h> ++#include <linux/string.h> ++#include <linux/dma-mapping.h> ++#include <linux/version.h> ++#include <asm/io.h> ++#include <linux/usb.h> ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) ++#include <../drivers/usb/core/hcd.h> ++#else ++#include <linux/usb/hcd.h> ++#endif ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)) ++#define USB_URB_EP_LINKING 1 ++#else ++#define USB_URB_EP_LINKING 0 ++#endif ++ ++#include "dwc_otg_hcd_if.h" ++#include "dwc_otg_dbg.h" ++#include "dwc_otg_driver.h" ++#include "dwc_otg_hcd.h" ++/** ++ * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is ++ * qualified with its direction (possible 32 endpoints per device). ++ */ ++#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \ ++ ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4) ++ ++static const char dwc_otg_hcd_name[] = "dwc_otg_hcd"; ++ ++/** @name Linux HC Driver API Functions */ ++/** @{ */ ++/* manage i/o requests, device state */ ++static int dwc_otg_urb_enqueue(struct usb_hcd *hcd, ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++ struct usb_host_endpoint *ep, ++#endif ++ struct urb *urb, gfp_t mem_flags); ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb); ++#endif ++#else /* kernels at or post 2.6.30 */ ++static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, ++ struct urb *urb, int status); ++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) */ ++ ++static void endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30) ++static void endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep); ++#endif ++static irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd); ++extern int hcd_start(struct usb_hcd *hcd); ++extern void hcd_stop(struct usb_hcd *hcd); ++static int get_frame_number(struct usb_hcd *hcd); ++extern int hub_status_data(struct usb_hcd *hcd, char *buf); ++extern int hub_control(struct usb_hcd *hcd, ++ u16 typeReq, ++ u16 wValue, u16 wIndex, char *buf, u16 wLength); ++ ++struct wrapper_priv_data { ++ dwc_otg_hcd_t *dwc_otg_hcd; ++}; ++ ++/** @} */ ++ ++static struct hc_driver dwc_otg_hc_driver = { ++ ++ .description = dwc_otg_hcd_name, ++ .product_desc = "DWC OTG Controller", ++ .hcd_priv_size = sizeof(struct wrapper_priv_data), ++ ++ .irq = dwc_otg_hcd_irq, ++ ++ .flags = HCD_MEMORY | HCD_USB2, ++ ++ //.reset = ++ .start = hcd_start, ++ //.suspend = ++ //.resume = ++ .stop = hcd_stop, ++ ++ .urb_enqueue = dwc_otg_urb_enqueue, ++ .urb_dequeue = dwc_otg_urb_dequeue, ++ .endpoint_disable = endpoint_disable, ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30) ++ .endpoint_reset = endpoint_reset, ++#endif ++ .get_frame_number = get_frame_number, ++ ++ .hub_status_data = hub_status_data, ++ .hub_control = hub_control, ++ //.bus_suspend = ++ //.bus_resume = ++}; ++ ++/** Gets the dwc_otg_hcd from a struct usb_hcd */ ++static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd) ++{ ++ struct wrapper_priv_data *p; ++ p = (struct wrapper_priv_data *)(hcd->hcd_priv); ++ return p->dwc_otg_hcd; ++} ++ ++/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */ ++static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ return dwc_otg_hcd_get_priv_data(dwc_otg_hcd); ++} ++ ++/** Gets the usb_host_endpoint associated with an URB. */ ++inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *urb) ++{ ++ struct usb_device *dev = urb->dev; ++ int ep_num = usb_pipeendpoint(urb->pipe); ++ ++ if (usb_pipein(urb->pipe)) ++ return dev->ep_in[ep_num]; ++ else ++ return dev->ep_out[ep_num]; ++} ++ ++static int _disconnect(dwc_otg_hcd_t * hcd) ++{ ++ struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd); ++ ++ usb_hcd->self.is_b_host = 0; ++ return 0; ++} ++ ++static int _start(dwc_otg_hcd_t * hcd) ++{ ++ struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd); ++ ++ usb_hcd->self.is_b_host = dwc_otg_hcd_is_b_host(hcd); ++ hcd_start(usb_hcd); ++ ++ return 0; ++} ++ ++static int _hub_info(dwc_otg_hcd_t * hcd, void *urb_handle, uint32_t * hub_addr, ++ uint32_t * port_addr) ++{ ++ struct urb *urb = (struct urb *)urb_handle; ++ struct usb_bus *bus; ++#if 1 //GRAYG - temporary ++ if (NULL == urb_handle) ++ DWC_ERROR("**** %s - NULL URB handle\n", __func__);//GRAYG ++ if (NULL == urb->dev) ++ DWC_ERROR("**** %s - URB has no device\n", __func__);//GRAYG ++ if (NULL == port_addr) ++ DWC_ERROR("**** %s - NULL port_address\n", __func__);//GRAYG ++#endif ++ if (urb->dev->tt) { ++ if (NULL == urb->dev->tt->hub) { ++ DWC_ERROR("**** %s - (URB's transactor has no TT - giving no hub)\n", ++ __func__); //GRAYG ++ //*hub_addr = (u8)usb_pipedevice(urb->pipe); //GRAYG ++ *hub_addr = 0; //GRAYG ++ // we probably shouldn't have a transaction translator if ++ // there's no associated hub? ++ } else { ++ bus = hcd_to_bus(dwc_otg_hcd_to_hcd(hcd)); ++ if (urb->dev->tt->hub == bus->root_hub) ++ *hub_addr = 0; ++ else ++ *hub_addr = urb->dev->tt->hub->devnum; ++ } ++ *port_addr = urb->dev->tt->multi ? urb->dev->ttport : 1; ++ } else { ++ *hub_addr = 0; ++ *port_addr = urb->dev->ttport; ++ } ++ return 0; ++} ++ ++static int _speed(dwc_otg_hcd_t * hcd, void *urb_handle) ++{ ++ struct urb *urb = (struct urb *)urb_handle; ++ return urb->dev->speed; ++} ++ ++static int _get_b_hnp_enable(dwc_otg_hcd_t * hcd) ++{ ++ struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd); ++ return usb_hcd->self.b_hnp_enable; ++} ++ ++static void allocate_bus_bandwidth(struct usb_hcd *hcd, uint32_t bw, ++ struct urb *urb) ++{ ++ hcd_to_bus(hcd)->bandwidth_allocated += bw / urb->interval; ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ hcd_to_bus(hcd)->bandwidth_isoc_reqs++; ++ } else { ++ hcd_to_bus(hcd)->bandwidth_int_reqs++; ++ } ++} ++ ++static void free_bus_bandwidth(struct usb_hcd *hcd, uint32_t bw, ++ struct urb *urb) ++{ ++ hcd_to_bus(hcd)->bandwidth_allocated -= bw / urb->interval; ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ hcd_to_bus(hcd)->bandwidth_isoc_reqs--; ++ } else { ++ hcd_to_bus(hcd)->bandwidth_int_reqs--; ++ } ++} ++ ++/** ++ * Sets the final status of an URB and returns it to the device driver. Any ++ * required cleanup of the URB is performed. ++ */ ++static int _complete(dwc_otg_hcd_t * hcd, void *urb_handle, ++ dwc_otg_hcd_urb_t * dwc_otg_urb, int32_t status) ++{ ++ struct urb *urb = (struct urb *)urb_handle; ++ ++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { ++ DWC_PRINTF("%s: urb %p, device %d, ep %d %s, status=%d\n", ++ __func__, urb, usb_pipedevice(urb->pipe), ++ usb_pipeendpoint(urb->pipe), ++ usb_pipein(urb->pipe) ? "IN" : "OUT", status); ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ int i; ++ for (i = 0; i < urb->number_of_packets; i++) { ++ DWC_PRINTF(" ISO Desc %d status: %d\n", ++ i, urb->iso_frame_desc[i].status); ++ } ++ } ++ } ++ ++ urb->actual_length = dwc_otg_hcd_urb_get_actual_length(dwc_otg_urb); ++ /* Convert status value. */ ++ switch (status) { ++ case -DWC_E_PROTOCOL: ++ status = -EPROTO; ++ break; ++ case -DWC_E_IN_PROGRESS: ++ status = -EINPROGRESS; ++ break; ++ case -DWC_E_PIPE: ++ status = -EPIPE; ++ break; ++ case -DWC_E_IO: ++ status = -EIO; ++ break; ++ case -DWC_E_TIMEOUT: ++ status = -ETIMEDOUT; ++ break; ++ case -DWC_E_OVERFLOW: ++ status = -EOVERFLOW; ++ break; ++ default: ++ if (status) { ++ DWC_PRINTF("Uknown urb status %d\n", status); ++ ++ } ++ } ++ ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ int i; ++ ++ urb->error_count = dwc_otg_hcd_urb_get_error_count(dwc_otg_urb); ++ for (i = 0; i < urb->number_of_packets; ++i) { ++ urb->iso_frame_desc[i].actual_length = ++ dwc_otg_hcd_urb_get_iso_desc_actual_length ++ (dwc_otg_urb, i); ++ urb->iso_frame_desc[i].status = ++ dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_urb, i); ++ } ++ } ++ ++ urb->status = status; ++ urb->hcpriv = NULL; ++ if (!status) { ++ if ((urb->transfer_flags & URB_SHORT_NOT_OK) && ++ (urb->actual_length < urb->transfer_buffer_length)) { ++ urb->status = -EREMOTEIO; ++ } ++ } ++ ++ if ((usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) || ++ (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) { ++ struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb); ++ if (ep) { ++ free_bus_bandwidth(dwc_otg_hcd_to_hcd(hcd), ++ dwc_otg_hcd_get_ep_bandwidth(hcd, ++ ep->hcpriv), ++ urb); ++ } ++ } ++ ++ DWC_FREE(dwc_otg_urb); ++ ++#if USB_URB_EP_LINKING ++ usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(hcd), urb); ++#endif ++ DWC_SPINUNLOCK(hcd->lock); ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++ usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb); ++#else ++ usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, status); ++#endif ++ DWC_SPINLOCK(hcd->lock); ++ ++ return 0; ++} ++ ++static struct dwc_otg_hcd_function_ops hcd_fops = { ++ .start = _start, ++ .disconnect = _disconnect, ++ .hub_info = _hub_info, ++ .speed = _speed, ++ .complete = _complete, ++ .get_b_hnp_enable = _get_b_hnp_enable, ++}; ++ ++/** ++ * Initializes the HCD. This function allocates memory for and initializes the ++ * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the ++ * USB bus with the core and calls the hc_driver->start() function. It returns ++ * a negative error on failure. ++ */ ++int hcd_init(dwc_bus_dev_t *_dev) ++{ ++ struct usb_hcd *hcd = NULL; ++ dwc_otg_hcd_t *dwc_otg_hcd = NULL; ++ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); ++ int retval = 0; ++ u64 dmamask; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT otg_dev=%p\n", otg_dev); ++ ++ /* Set device flags indicating whether the HCD supports DMA. */ ++ if (dwc_otg_is_dma_enable(otg_dev->core_if)) ++ dmamask = DMA_BIT_MASK(32); ++ else ++ dmamask = 0; ++ ++#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE) ++ dma_set_mask(&_dev->dev, dmamask); ++ dma_set_coherent_mask(&_dev->dev, dmamask); ++#elif defined(PCI_INTERFACE) ++ pci_set_dma_mask(_dev, dmamask); ++ pci_set_consistent_dma_mask(_dev, dmamask); ++#endif ++ ++ /* ++ * Allocate memory for the base HCD plus the DWC OTG HCD. ++ * Initialize the base HCD. ++ */ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) ++ hcd = usb_create_hcd(&dwc_otg_hc_driver, &_dev->dev, _dev->dev.bus_id); ++#else ++ hcd = usb_create_hcd(&dwc_otg_hc_driver, &_dev->dev, dev_name(&_dev->dev)); ++ hcd->has_tt = 1; ++// hcd->uses_new_polling = 1; ++// hcd->poll_rh = 0; ++#endif ++ if (!hcd) { ++ retval = -ENOMEM; ++ goto error1; ++ } ++ ++ hcd->regs = otg_dev->os_dep.base; ++ ++ /* Initialize the DWC OTG HCD. */ ++ dwc_otg_hcd = dwc_otg_hcd_alloc_hcd(); ++ if (!dwc_otg_hcd) { ++ goto error2; ++ } ++ ((struct wrapper_priv_data *)(hcd->hcd_priv))->dwc_otg_hcd = ++ dwc_otg_hcd; ++ otg_dev->hcd = dwc_otg_hcd; ++ ++ if (dwc_otg_hcd_init(dwc_otg_hcd, otg_dev->core_if)) { ++ goto error2; ++ } ++ ++ otg_dev->hcd->otg_dev = otg_dev; ++ hcd->self.otg_port = dwc_otg_hcd_otg_port(dwc_otg_hcd); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33) //don't support for LM(with 2.6.20.1 kernel) ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) //version field absent later ++ hcd->self.otg_version = dwc_otg_get_otg_version(otg_dev->core_if); ++#endif ++ /* Don't support SG list at this point */ ++ hcd->self.sg_tablesize = 0; ++#endif ++ /* ++ * Finish generic HCD initialization and start the HCD. This function ++ * allocates the DMA buffer pool, registers the USB bus, requests the ++ * IRQ line, and calls hcd_start method. ++ */ ++#ifdef PLATFORM_INTERFACE ++ retval = usb_add_hcd(hcd, platform_get_irq(_dev, 0), IRQF_SHARED | IRQF_DISABLED); ++#else ++ retval = usb_add_hcd(hcd, _dev->irq, IRQF_SHARED | IRQF_DISABLED); ++#endif ++ if (retval < 0) { ++ goto error2; ++ } ++ ++ dwc_otg_hcd_set_priv_data(dwc_otg_hcd, hcd); ++ return 0; ++ ++error2: ++ usb_put_hcd(hcd); ++error1: ++ return retval; ++} ++ ++/** ++ * Removes the HCD. ++ * Frees memory and resources associated with the HCD and deregisters the bus. ++ */ ++void hcd_remove(dwc_bus_dev_t *_dev) ++{ ++ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); ++ dwc_otg_hcd_t *dwc_otg_hcd; ++ struct usb_hcd *hcd; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE otg_dev=%p\n", otg_dev); ++ ++ if (!otg_dev) { ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__); ++ return; ++ } ++ ++ dwc_otg_hcd = otg_dev->hcd; ++ ++ if (!dwc_otg_hcd) { ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__); ++ return; ++ } ++ ++ hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd); ++ ++ if (!hcd) { ++ DWC_DEBUGPL(DBG_ANY, ++ "%s: dwc_otg_hcd_to_hcd(dwc_otg_hcd) NULL!\n", ++ __func__); ++ return; ++ } ++ usb_remove_hcd(hcd); ++ dwc_otg_hcd_set_priv_data(dwc_otg_hcd, NULL); ++ dwc_otg_hcd_remove(dwc_otg_hcd); ++ usb_put_hcd(hcd); ++} ++ ++/* ========================================================================= ++ * Linux HC Driver Functions ++ * ========================================================================= */ ++ ++/** Initializes the DWC_otg controller and its root hub and prepares it for host ++ * mode operation. Activates the root port. Returns 0 on success and a negative ++ * error code on failure. */ ++int hcd_start(struct usb_hcd *hcd) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ struct usb_bus *bus; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n"); ++ bus = hcd_to_bus(hcd); ++ ++ hcd->state = HC_STATE_RUNNING; ++ if (dwc_otg_hcd_start(dwc_otg_hcd, &hcd_fops)) { ++ return 0; ++ } ++ ++ /* Initialize and connect root hub if one is not already attached */ ++ if (bus->root_hub) { ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n"); ++ /* Inform the HUB driver to resume. */ ++ usb_hcd_resume_root_hub(hcd); ++ } ++ ++ return 0; ++} ++ ++/** ++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are ++ * stopped. ++ */ ++void hcd_stop(struct usb_hcd *hcd) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ ++ dwc_otg_hcd_stop(dwc_otg_hcd); ++} ++ ++/** Returns the current frame number. */ ++static int get_frame_number(struct usb_hcd *hcd) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ ++ return dwc_otg_hcd_get_frame_number(dwc_otg_hcd); ++} ++ ++#ifdef DEBUG ++static void dump_urb_info(struct urb *urb, char *fn_name) ++{ ++ DWC_PRINTF("%s, urb %p\n", fn_name, urb); ++ DWC_PRINTF(" Device address: %d\n", usb_pipedevice(urb->pipe)); ++ DWC_PRINTF(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe), ++ (usb_pipein(urb->pipe) ? "IN" : "OUT")); ++ DWC_PRINTF(" Endpoint type: %s\n", ( { ++ char *pipetype; ++ switch (usb_pipetype(urb->pipe)) { ++case PIPE_CONTROL: ++pipetype = "CONTROL"; break; case PIPE_BULK: ++pipetype = "BULK"; break; case PIPE_INTERRUPT: ++pipetype = "INTERRUPT"; break; case PIPE_ISOCHRONOUS: ++pipetype = "ISOCHRONOUS"; break; default: ++ pipetype = "UNKNOWN"; break;}; ++ pipetype;} ++ )) ; ++ DWC_PRINTF(" Speed: %s\n", ( { ++ char *speed; switch (urb->dev->speed) { ++case USB_SPEED_HIGH: ++speed = "HIGH"; break; case USB_SPEED_FULL: ++speed = "FULL"; break; case USB_SPEED_LOW: ++speed = "LOW"; break; default: ++ speed = "UNKNOWN"; break;}; ++ speed;} ++ )) ; ++ DWC_PRINTF(" Max packet size: %d\n", ++ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))); ++ DWC_PRINTF(" Data buffer length: %d\n", urb->transfer_buffer_length); ++ DWC_PRINTF(" Transfer buffer: %p, Transfer DMA: %p\n", ++ urb->transfer_buffer, (void *)urb->transfer_dma); ++ DWC_PRINTF(" Setup buffer: %p, Setup DMA: %p\n", ++ urb->setup_packet, (void *)urb->setup_dma); ++ DWC_PRINTF(" Interval: %d\n", urb->interval); ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ int i; ++ for (i = 0; i < urb->number_of_packets; i++) { ++ DWC_PRINTF(" ISO Desc %d:\n", i); ++ DWC_PRINTF(" offset: %d, length %d\n", ++ urb->iso_frame_desc[i].offset, ++ urb->iso_frame_desc[i].length); ++ } ++ } ++} ++#endif ++ ++/** Starts processing a USB transfer request specified by a USB Request Block ++ * (URB). mem_flags indicates the type of memory allocation to use while ++ * processing this URB. */ ++static int dwc_otg_urb_enqueue(struct usb_hcd *hcd, ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++ struct usb_host_endpoint *ep, ++#endif ++ struct urb *urb, gfp_t mem_flags) ++{ ++ int retval = 0; ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,28) ++ struct usb_host_endpoint *ep = urb->ep; ++#endif ++#if USB_URB_EP_LINKING ++ dwc_irqflags_t irqflags; ++#endif ++ void **ref_ep_hcpriv = &ep->hcpriv; ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ dwc_otg_hcd_urb_t *dwc_otg_urb; ++ int i; ++ int alloc_bandwidth = 0; ++ uint8_t ep_type = 0; ++ uint32_t flags = 0; ++ void *buf; ++ ++#ifdef DEBUG ++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { ++ dump_urb_info(urb, "dwc_otg_urb_enqueue"); ++ } ++#endif ++ ++ if (!urb->transfer_buffer && urb->transfer_buffer_length) ++ return -EINVAL; ++ ++ if ((usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) ++ || (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) { ++ if (!dwc_otg_hcd_is_bandwidth_allocated ++ (dwc_otg_hcd, ref_ep_hcpriv)) { ++ alloc_bandwidth = 1; ++ } ++ } ++ ++ switch (usb_pipetype(urb->pipe)) { ++ case PIPE_CONTROL: ++ ep_type = USB_ENDPOINT_XFER_CONTROL; ++ break; ++ case PIPE_ISOCHRONOUS: ++ ep_type = USB_ENDPOINT_XFER_ISOC; ++ break; ++ case PIPE_BULK: ++ ep_type = USB_ENDPOINT_XFER_BULK; ++ break; ++ case PIPE_INTERRUPT: ++ ep_type = USB_ENDPOINT_XFER_INT; ++ break; ++ default: ++ DWC_WARN("Wrong EP type - %d\n", usb_pipetype(urb->pipe)); ++ } ++ ++ /* # of packets is often 0 - do we really need to call this then? */ ++ dwc_otg_urb = dwc_otg_hcd_urb_alloc(dwc_otg_hcd, ++ urb->number_of_packets, ++ mem_flags == GFP_ATOMIC ? 1 : 0); ++ ++ if(dwc_otg_urb == NULL) ++ return -ENOMEM; ++ ++ urb->hcpriv = dwc_otg_urb; ++ if (!dwc_otg_urb && urb->number_of_packets) ++ return -ENOMEM; ++ ++ dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_urb, usb_pipedevice(urb->pipe), ++ usb_pipeendpoint(urb->pipe), ep_type, ++ usb_pipein(urb->pipe), ++ usb_maxpacket(urb->dev, urb->pipe, ++ !(usb_pipein(urb->pipe)))); ++ ++ buf = urb->transfer_buffer; ++ if (hcd->self.uses_dma) { ++ /* ++ * Calculate virtual address from physical address, ++ * because some class driver may not fill transfer_buffer. ++ * In Buffer DMA mode virual address is used, ++ * when handling non DWORD aligned buffers. ++ */ ++ //buf = phys_to_virt(urb->transfer_dma); ++ // DMA addresses are bus addresses not physical addresses! ++ buf = dma_to_virt(&urb->dev->dev, urb->transfer_dma); ++ } ++ ++ if (!(urb->transfer_flags & URB_NO_INTERRUPT)) ++ flags |= URB_GIVEBACK_ASAP; ++ if (urb->transfer_flags & URB_ZERO_PACKET) ++ flags |= URB_SEND_ZERO_PACKET; ++ ++ dwc_otg_hcd_urb_set_params(dwc_otg_urb, urb, buf, ++ urb->transfer_dma, ++ urb->transfer_buffer_length, ++ urb->setup_packet, ++ urb->setup_dma, flags, urb->interval); ++ ++ for (i = 0; i < urb->number_of_packets; ++i) { ++ dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_urb, i, ++ urb-> ++ iso_frame_desc[i].offset, ++ urb-> ++ iso_frame_desc[i].length); ++ } ++ ++#if USB_URB_EP_LINKING ++ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &irqflags); ++ retval = usb_hcd_link_urb_to_ep(hcd, urb); ++ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, irqflags); ++ if (0 == retval) ++#endif ++ { ++ retval = dwc_otg_hcd_urb_enqueue(dwc_otg_hcd, dwc_otg_urb, ++ /*(dwc_otg_qh_t **)*/ ++ ref_ep_hcpriv, ++ mem_flags == GFP_ATOMIC ? 1 : 0); ++ if (0 == retval) { ++ if (alloc_bandwidth) { ++ allocate_bus_bandwidth(hcd, ++ dwc_otg_hcd_get_ep_bandwidth( ++ dwc_otg_hcd, *ref_ep_hcpriv), ++ urb); ++ } ++ } else { ++#if USB_URB_EP_LINKING ++ dwc_irqflags_t irqflags; ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG dwc_otg_hcd_urb_enqueue failed rc %d\n", retval); ++ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &irqflags); ++ usb_hcd_unlink_urb_from_ep(hcd, urb); ++ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, irqflags); ++#endif ++ if (retval == -DWC_E_NO_DEVICE) { ++ retval = -ENODEV; ++ } ++ } ++ } ++ return retval; ++} ++ ++/** Aborts/cancels a USB transfer request. Always returns 0 to indicate ++ * success. */ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) ++#else ++static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) ++#endif ++{ ++ dwc_irqflags_t flags; ++ dwc_otg_hcd_t *dwc_otg_hcd; ++ int rc; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n"); ++ ++ dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ ++#ifdef DEBUG ++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { ++ dump_urb_info(urb, "dwc_otg_urb_dequeue"); ++ } ++#endif ++ ++ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags); ++ rc = usb_hcd_check_unlink_urb(hcd, urb, status); ++ if (0 == rc) { ++ if(urb->hcpriv != NULL) { ++ dwc_otg_hcd_urb_dequeue(dwc_otg_hcd, ++ (dwc_otg_hcd_urb_t *)urb->hcpriv); ++ ++ DWC_FREE(urb->hcpriv); ++ urb->hcpriv = NULL; ++ } ++ } ++ ++ if (0 == rc) { ++ /* Higher layer software sets URB status. */ ++#if USB_URB_EP_LINKING ++ usb_hcd_unlink_urb_from_ep(hcd, urb); ++#endif ++ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags); ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++ usb_hcd_giveback_urb(hcd, urb); ++#else ++ usb_hcd_giveback_urb(hcd, urb, status); ++#endif ++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { ++ DWC_PRINTF("Called usb_hcd_giveback_urb() \n"); ++ DWC_PRINTF(" 1urb->status = %d\n", urb->status); ++ } ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue OK\n"); ++ } else { ++ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags); ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue failed - rc %d\n", ++ rc); ++ } ++ ++ return rc; ++} ++ ++/* Frees resources in the DWC_otg controller related to a given endpoint. Also ++ * clears state in the HCD related to the endpoint. Any URBs for the endpoint ++ * must already be dequeued. */ ++static void endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ ++ DWC_DEBUGPL(DBG_HCD, ++ "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, " ++ "endpoint=%d\n", ep->desc.bEndpointAddress, ++ dwc_ep_addr_to_endpoint(ep->desc.bEndpointAddress)); ++ dwc_otg_hcd_endpoint_disable(dwc_otg_hcd, ep->hcpriv, 250); ++ ep->hcpriv = NULL; ++} ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30) ++/* Resets endpoint specific parameter values, in current version used to reset ++ * the data toggle(as a WA). This function can be called from usb_clear_halt routine */ ++static void endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep) ++{ ++ dwc_irqflags_t flags; ++ struct usb_device *udev = NULL; ++ int epnum = usb_endpoint_num(&ep->desc); ++ int is_out = usb_endpoint_dir_out(&ep->desc); ++ int is_control = usb_endpoint_xfer_control(&ep->desc); ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ struct device *dev = DWC_OTG_OS_GETDEV(dwc_otg_hcd->otg_dev->os_dep); ++ ++ if (dev) ++ udev = to_usb_device(dev); ++ else ++ return; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP RESET: Endpoint Num=0x%02d\n", epnum); ++ ++ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags); ++ usb_settoggle(udev, epnum, is_out, 0); ++ if (is_control) ++ usb_settoggle(udev, epnum, !is_out, 0); ++ ++ if (ep->hcpriv) { ++ dwc_otg_hcd_endpoint_reset(dwc_otg_hcd, ep->hcpriv); ++ } ++ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags); ++} ++#endif ++ ++/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if ++ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid ++ * interrupt. ++ * ++ * This function is called by the USB core when an interrupt occurs */ ++static irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ int32_t retval = dwc_otg_hcd_handle_intr(dwc_otg_hcd); ++ if (retval != 0) { ++ S3C2410X_CLEAR_EINTPEND(); ++ } ++ return IRQ_RETVAL(retval); ++} ++ ++/** Creates Status Change bitmap for the root hub and root port. The bitmap is ++ * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1 ++ * is the status change indicator for the single root port. Returns 1 if either ++ * change indicator is 1, otherwise returns 0. */ ++int hub_status_data(struct usb_hcd *hcd, char *buf) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ ++ buf[0] = 0; ++ buf[0] |= (dwc_otg_hcd_is_status_changed(dwc_otg_hcd, 1)) << 1; ++ ++ return (buf[0] != 0); ++} ++ ++/** Handles hub class-specific requests. */ ++int hub_control(struct usb_hcd *hcd, ++ u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) ++{ ++ int retval; ++ ++ retval = dwc_otg_hcd_hub_control(hcd_to_dwc_otg_hcd(hcd), ++ typeReq, wValue, wIndex, buf, wLength); ++ ++ switch (retval) { ++ case -DWC_E_INVALID: ++ retval = -EINVAL; ++ break; ++ } ++ ++ return retval; ++} ++ ++#endif /* DWC_DEVICE_ONLY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c +@@ -0,0 +1,922 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_queue.c $ ++ * $Revision: #44 $ ++ * $Date: 2011/10/26 $ ++ * $Change: 1873028 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++ ++/** ++ * @file ++ * ++ * This file contains the functions to manage Queue Heads and Queue ++ * Transfer Descriptors. ++ */ ++ ++#include "dwc_otg_hcd.h" ++#include "dwc_otg_regs.h" ++ ++extern bool microframe_schedule; ++ ++/** ++ * Free each QTD in the QH's QTD-list then free the QH. QH should already be ++ * removed from a list. QTD list should already be empty if called from URB ++ * Dequeue. ++ * ++ * @param hcd HCD instance. ++ * @param qh The QH to free. ++ */ ++void dwc_otg_hcd_qh_free(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ dwc_otg_qtd_t *qtd, *qtd_tmp; ++ ++ /* Free each QTD in the QTD list */ ++ DWC_SPINLOCK(hcd->lock); ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) { ++ DWC_CIRCLEQ_REMOVE(&qh->qtd_list, qtd, qtd_list_entry); ++ dwc_otg_hcd_qtd_free(qtd); ++ } ++ ++ if (hcd->core_if->dma_desc_enable) { ++ dwc_otg_hcd_qh_free_ddma(hcd, qh); ++ } else if (qh->dw_align_buf) { ++ uint32_t buf_size; ++ if (qh->ep_type == UE_ISOCHRONOUS) { ++ buf_size = 4096; ++ } else { ++ buf_size = hcd->core_if->core_params->max_transfer_size; ++ } ++ DWC_DMA_FREE(buf_size, qh->dw_align_buf, qh->dw_align_buf_dma); ++ } ++ ++ DWC_FREE(qh); ++ DWC_SPINUNLOCK(hcd->lock); ++ return; ++} ++ ++#define BitStuffTime(bytecount) ((8 * 7* bytecount) / 6) ++#define HS_HOST_DELAY 5 /* nanoseconds */ ++#define FS_LS_HOST_DELAY 1000 /* nanoseconds */ ++#define HUB_LS_SETUP 333 /* nanoseconds */ ++#define NS_TO_US(ns) ((ns + 500) / 1000) ++ /* convert & round nanoseconds to microseconds */ ++ ++static uint32_t calc_bus_time(int speed, int is_in, int is_isoc, int bytecount) ++{ ++ unsigned long retval; ++ ++ switch (speed) { ++ case USB_SPEED_HIGH: ++ if (is_isoc) { ++ retval = ++ ((38 * 8 * 2083) + ++ (2083 * (3 + BitStuffTime(bytecount)))) / 1000 + ++ HS_HOST_DELAY; ++ } else { ++ retval = ++ ((55 * 8 * 2083) + ++ (2083 * (3 + BitStuffTime(bytecount)))) / 1000 + ++ HS_HOST_DELAY; ++ } ++ break; ++ case USB_SPEED_FULL: ++ if (is_isoc) { ++ retval = ++ (8354 * (31 + 10 * BitStuffTime(bytecount))) / 1000; ++ if (is_in) { ++ retval = 7268 + FS_LS_HOST_DELAY + retval; ++ } else { ++ retval = 6265 + FS_LS_HOST_DELAY + retval; ++ } ++ } else { ++ retval = ++ (8354 * (31 + 10 * BitStuffTime(bytecount))) / 1000; ++ retval = 9107 + FS_LS_HOST_DELAY + retval; ++ } ++ break; ++ case USB_SPEED_LOW: ++ if (is_in) { ++ retval = ++ (67667 * (31 + 10 * BitStuffTime(bytecount))) / ++ 1000; ++ retval = ++ 64060 + (2 * HUB_LS_SETUP) + FS_LS_HOST_DELAY + ++ retval; ++ } else { ++ retval = ++ (66700 * (31 + 10 * BitStuffTime(bytecount))) / ++ 1000; ++ retval = ++ 64107 + (2 * HUB_LS_SETUP) + FS_LS_HOST_DELAY + ++ retval; ++ } ++ break; ++ default: ++ DWC_WARN("Unknown device speed\n"); ++ retval = -1; ++ } ++ ++ return NS_TO_US(retval); ++} ++ ++/** ++ * Initializes a QH structure. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh The QH to init. ++ * @param urb Holds the information about the device/endpoint that we need ++ * to initialize the QH. ++ */ ++#define SCHEDULE_SLOP 10 ++void qh_init(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, dwc_otg_hcd_urb_t * urb) ++{ ++ char *speed, *type; ++ int dev_speed; ++ uint32_t hub_addr, hub_port; ++ ++ dwc_memset(qh, 0, sizeof(dwc_otg_qh_t)); ++ ++ /* Initialize QH */ ++ qh->ep_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info); ++ qh->ep_is_in = dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? 1 : 0; ++ ++ qh->data_toggle = DWC_OTG_HC_PID_DATA0; ++ qh->maxp = dwc_otg_hcd_get_mps(&urb->pipe_info); ++ DWC_CIRCLEQ_INIT(&qh->qtd_list); ++ DWC_LIST_INIT(&qh->qh_list_entry); ++ qh->channel = NULL; ++ ++ /* FS/LS Enpoint on HS Hub ++ * NOT virtual root hub */ ++ dev_speed = hcd->fops->speed(hcd, urb->priv); ++ ++ hcd->fops->hub_info(hcd, urb->priv, &hub_addr, &hub_port); ++ qh->do_split = 0; ++ if (microframe_schedule) ++ qh->speed = dev_speed; ++ ++ ++ if (((dev_speed == USB_SPEED_LOW) || ++ (dev_speed == USB_SPEED_FULL)) && ++ (hub_addr != 0 && hub_addr != 1)) { ++ DWC_DEBUGPL(DBG_HCD, ++ "QH init: EP %d: TT found at hub addr %d, for port %d\n", ++ dwc_otg_hcd_get_ep_num(&urb->pipe_info), hub_addr, ++ hub_port); ++ qh->do_split = 1; ++ } ++ ++ if (qh->ep_type == UE_INTERRUPT || qh->ep_type == UE_ISOCHRONOUS) { ++ /* Compute scheduling parameters once and save them. */ ++ hprt0_data_t hprt; ++ ++ /** @todo Account for split transfers in the bus time. */ ++ int bytecount = ++ dwc_hb_mult(qh->maxp) * dwc_max_packet(qh->maxp); ++ ++ qh->usecs = ++ calc_bus_time((qh->do_split ? USB_SPEED_HIGH : dev_speed), ++ qh->ep_is_in, (qh->ep_type == UE_ISOCHRONOUS), ++ bytecount); ++ /* Start in a slightly future (micro)frame. */ ++ qh->sched_frame = dwc_frame_num_inc(hcd->frame_number, ++ SCHEDULE_SLOP); ++ qh->interval = urb->interval; ++ ++#if 0 ++ /* Increase interrupt polling rate for debugging. */ ++ if (qh->ep_type == UE_INTERRUPT) { ++ qh->interval = 8; ++ } ++#endif ++ hprt.d32 = DWC_READ_REG32(hcd->core_if->host_if->hprt0); ++ if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) && ++ ((dev_speed == USB_SPEED_LOW) || ++ (dev_speed == USB_SPEED_FULL))) { ++ qh->interval *= 8; ++ qh->sched_frame |= 0x7; ++ qh->start_split_frame = qh->sched_frame; ++ } ++ ++ } ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n"); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - qh = %p\n", qh); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Device Address = %d\n", ++ dwc_otg_hcd_get_dev_addr(&urb->pipe_info)); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Endpoint %d, %s\n", ++ dwc_otg_hcd_get_ep_num(&urb->pipe_info), ++ dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT"); ++ switch (dev_speed) { ++ case USB_SPEED_LOW: ++ qh->dev_speed = DWC_OTG_EP_SPEED_LOW; ++ speed = "low"; ++ break; ++ case USB_SPEED_FULL: ++ qh->dev_speed = DWC_OTG_EP_SPEED_FULL; ++ speed = "full"; ++ break; ++ case USB_SPEED_HIGH: ++ qh->dev_speed = DWC_OTG_EP_SPEED_HIGH; ++ speed = "high"; ++ break; ++ default: ++ speed = "?"; ++ break; ++ } ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Speed = %s\n", speed); ++ ++ switch (qh->ep_type) { ++ case UE_ISOCHRONOUS: ++ type = "isochronous"; ++ break; ++ case UE_INTERRUPT: ++ type = "interrupt"; ++ break; ++ case UE_CONTROL: ++ type = "control"; ++ break; ++ case UE_BULK: ++ type = "bulk"; ++ break; ++ default: ++ type = "?"; ++ break; ++ } ++ ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Type = %s\n", type); ++ ++#ifdef DEBUG ++ if (qh->ep_type == UE_INTERRUPT) { ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n", ++ qh->usecs); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n", ++ qh->interval); ++ } ++#endif ++ ++} ++ ++/** ++ * This function allocates and initializes a QH. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param urb Holds the information about the device/endpoint that we need ++ * to initialize the QH. ++ * @param atomic_alloc Flag to do atomic allocation if needed ++ * ++ * @return Returns pointer to the newly allocated QH, or NULL on error. */ ++dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t * hcd, ++ dwc_otg_hcd_urb_t * urb, int atomic_alloc) ++{ ++ dwc_otg_qh_t *qh; ++ ++ /* Allocate memory */ ++ /** @todo add memflags argument */ ++ qh = dwc_otg_hcd_qh_alloc(atomic_alloc); ++ if (qh == NULL) { ++ DWC_ERROR("qh allocation failed"); ++ return NULL; ++ } ++ ++ qh_init(hcd, qh, urb); ++ ++ if (hcd->core_if->dma_desc_enable ++ && (dwc_otg_hcd_qh_init_ddma(hcd, qh) < 0)) { ++ dwc_otg_hcd_qh_free(hcd, qh); ++ return NULL; ++ } ++ ++ return qh; ++} ++ ++/* microframe_schedule=0 start */ ++ ++/** ++ * Checks that a channel is available for a periodic transfer. ++ * ++ * @return 0 if successful, negative error code otherise. ++ */ ++static int periodic_channel_available(dwc_otg_hcd_t * hcd) ++{ ++ /* ++ * Currently assuming that there is a dedicated host channnel for each ++ * periodic transaction plus at least one host channel for ++ * non-periodic transactions. ++ */ ++ int status; ++ int num_channels; ++ ++ num_channels = hcd->core_if->core_params->host_channels; ++ if ((hcd->periodic_channels + hcd->non_periodic_channels < num_channels) ++ && (hcd->periodic_channels < num_channels - 1)) { ++ status = 0; ++ } else { ++ DWC_INFO("%s: Total channels: %d, Periodic: %d, Non-periodic: %d\n", ++ __func__, num_channels, hcd->periodic_channels, hcd->non_periodic_channels); //NOTICE ++ status = -DWC_E_NO_SPACE; ++ } ++ ++ return status; ++} ++ ++/** ++ * Checks that there is sufficient bandwidth for the specified QH in the ++ * periodic schedule. For simplicity, this calculation assumes that all the ++ * transfers in the periodic schedule may occur in the same (micro)frame. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh QH containing periodic bandwidth required. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++static int check_periodic_bandwidth(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ int status; ++ int16_t max_claimed_usecs; ++ ++ status = 0; ++ ++ if ((qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) || qh->do_split) { ++ /* ++ * High speed mode. ++ * Max periodic usecs is 80% x 125 usec = 100 usec. ++ */ ++ ++ max_claimed_usecs = 100 - qh->usecs; ++ } else { ++ /* ++ * Full speed mode. ++ * Max periodic usecs is 90% x 1000 usec = 900 usec. ++ */ ++ max_claimed_usecs = 900 - qh->usecs; ++ } ++ ++ if (hcd->periodic_usecs > max_claimed_usecs) { ++ DWC_INFO("%s: already claimed usecs %d, required usecs %d\n", __func__, hcd->periodic_usecs, qh->usecs); //NOTICE ++ status = -DWC_E_NO_SPACE; ++ } ++ ++ return status; ++} ++ ++/* microframe_schedule=0 end */ ++ ++/** ++ * Microframe scheduler ++ * track the total use in hcd->frame_usecs ++ * keep each qh use in qh->frame_usecs ++ * when surrendering the qh then donate the time back ++ */ ++const unsigned short max_uframe_usecs[]={ 100, 100, 100, 100, 100, 100, 30, 0 }; ++ ++/* ++ * called from dwc_otg_hcd.c:dwc_otg_hcd_init ++ */ ++int init_hcd_usecs(dwc_otg_hcd_t *_hcd) ++{ ++ int i; ++ for (i=0; i<8; i++) { ++ _hcd->frame_usecs[i] = max_uframe_usecs[i]; ++ } ++ return 0; ++} ++ ++static int find_single_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) ++{ ++ int i; ++ unsigned short utime; ++ int t_left; ++ int ret; ++ int done; ++ ++ ret = -1; ++ utime = _qh->usecs; ++ t_left = utime; ++ i = 0; ++ done = 0; ++ while (done == 0) { ++ /* At the start _hcd->frame_usecs[i] = max_uframe_usecs[i]; */ ++ if (utime <= _hcd->frame_usecs[i]) { ++ _hcd->frame_usecs[i] -= utime; ++ _qh->frame_usecs[i] += utime; ++ t_left -= utime; ++ ret = i; ++ done = 1; ++ return ret; ++ } else { ++ i++; ++ if (i == 8) { ++ done = 1; ++ ret = -1; ++ } ++ } ++ } ++ return ret; ++ } ++ ++/* ++ * use this for FS apps that can span multiple uframes ++ */ ++static int find_multi_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) ++{ ++ int i; ++ int j; ++ unsigned short utime; ++ int t_left; ++ int ret; ++ int done; ++ unsigned short xtime; ++ ++ ret = -1; ++ utime = _qh->usecs; ++ t_left = utime; ++ i = 0; ++ done = 0; ++loop: ++ while (done == 0) { ++ if(_hcd->frame_usecs[i] <= 0) { ++ i++; ++ if (i == 8) { ++ done = 1; ++ ret = -1; ++ } ++ goto loop; ++ } ++ ++ /* ++ * we need n consecutive slots ++ * so use j as a start slot j plus j+1 must be enough time (for now) ++ */ ++ xtime= _hcd->frame_usecs[i]; ++ for (j = i+1 ; j < 8 ; j++ ) { ++ /* ++ * if we add this frame remaining time to xtime we may ++ * be OK, if not we need to test j for a complete frame ++ */ ++ if ((xtime+_hcd->frame_usecs[j]) < utime) { ++ if (_hcd->frame_usecs[j] < max_uframe_usecs[j]) { ++ j = 8; ++ ret = -1; ++ continue; ++ } ++ } ++ if (xtime >= utime) { ++ ret = i; ++ j = 8; /* stop loop with a good value ret */ ++ continue; ++ } ++ /* add the frame time to x time */ ++ xtime += _hcd->frame_usecs[j]; ++ /* we must have a fully available next frame or break */ ++ if ((xtime < utime) ++ && (_hcd->frame_usecs[j] == max_uframe_usecs[j])) { ++ ret = -1; ++ j = 8; /* stop loop with a bad value ret */ ++ continue; ++ } ++ } ++ if (ret >= 0) { ++ t_left = utime; ++ for (j = i; (t_left>0) && (j < 8); j++ ) { ++ t_left -= _hcd->frame_usecs[j]; ++ if ( t_left <= 0 ) { ++ _qh->frame_usecs[j] += _hcd->frame_usecs[j] + t_left; ++ _hcd->frame_usecs[j]= -t_left; ++ ret = i; ++ done = 1; ++ } else { ++ _qh->frame_usecs[j] += _hcd->frame_usecs[j]; ++ _hcd->frame_usecs[j] = 0; ++ } ++ } ++ } else { ++ i++; ++ if (i == 8) { ++ done = 1; ++ ret = -1; ++ } ++ } ++ } ++ return ret; ++} ++ ++static int find_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) ++{ ++ int ret; ++ ret = -1; ++ ++ if (_qh->speed == USB_SPEED_HIGH) { ++ /* if this is a hs transaction we need a full frame */ ++ ret = find_single_uframe(_hcd, _qh); ++ } else { ++ /* if this is a fs transaction we may need a sequence of frames */ ++ ret = find_multi_uframe(_hcd, _qh); ++ } ++ return ret; ++} ++ ++/** ++ * Checks that the max transfer size allowed in a host channel is large enough ++ * to handle the maximum data transfer in a single (micro)frame for a periodic ++ * transfer. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh QH for a periodic endpoint. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++static int check_max_xfer_size(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ int status; ++ uint32_t max_xfer_size; ++ uint32_t max_channel_xfer_size; ++ ++ status = 0; ++ ++ max_xfer_size = dwc_max_packet(qh->maxp) * dwc_hb_mult(qh->maxp); ++ max_channel_xfer_size = hcd->core_if->core_params->max_transfer_size; ++ ++ if (max_xfer_size > max_channel_xfer_size) { ++ DWC_INFO("%s: Periodic xfer length %d > " "max xfer length for channel %d\n", ++ __func__, max_xfer_size, max_channel_xfer_size); //NOTICE ++ status = -DWC_E_NO_SPACE; ++ } ++ ++ return status; ++} ++ ++/** ++ * Schedules an interrupt or isochronous transfer in the periodic schedule. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh QH for the periodic transfer. The QH should already contain the ++ * scheduling information. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++static int schedule_periodic(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ int status = 0; ++ ++ if (microframe_schedule) { ++ int frame; ++ status = find_uframe(hcd, qh); ++ frame = -1; ++ if (status == 0) { ++ frame = 7; ++ } else { ++ if (status > 0 ) ++ frame = status-1; ++ } ++ ++ /* Set the new frame up */ ++ if (frame > -1) { ++ qh->sched_frame &= ~0x7; ++ qh->sched_frame |= (frame & 7); ++ } ++ ++ if (status != -1) ++ status = 0; ++ } else { ++ status = periodic_channel_available(hcd); ++ if (status) { ++ DWC_INFO("%s: No host channel available for periodic " "transfer.\n", __func__); //NOTICE ++ return status; ++ } ++ ++ status = check_periodic_bandwidth(hcd, qh); ++ } ++ if (status) { ++ DWC_INFO("%s: Insufficient periodic bandwidth for " ++ "periodic transfer.\n", __func__); ++ return status; ++ } ++ status = check_max_xfer_size(hcd, qh); ++ if (status) { ++ DWC_INFO("%s: Channel max transfer size too small " ++ "for periodic transfer.\n", __func__); ++ return status; ++ } ++ ++ if (hcd->core_if->dma_desc_enable) { ++ /* Don't rely on SOF and start in ready schedule */ ++ DWC_LIST_INSERT_TAIL(&hcd->periodic_sched_ready, &qh->qh_list_entry); ++ } ++ else { ++ /* Always start in the inactive schedule. */ ++ DWC_LIST_INSERT_TAIL(&hcd->periodic_sched_inactive, &qh->qh_list_entry); ++ } ++ ++ if (!microframe_schedule) { ++ /* Reserve the periodic channel. */ ++ hcd->periodic_channels++; ++ } ++ ++ /* Update claimed usecs per (micro)frame. */ ++ hcd->periodic_usecs += qh->usecs; ++ ++ return status; ++} ++ ++/** ++ * This function adds a QH to either the non periodic or periodic schedule if ++ * it is not already in the schedule. If the QH is already in the schedule, no ++ * action is taken. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ int status = 0; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ if (!DWC_LIST_EMPTY(&qh->qh_list_entry)) { ++ /* QH already in a schedule. */ ++ return status; ++ } ++ ++ /* Add the new QH to the appropriate schedule */ ++ if (dwc_qh_is_non_per(qh)) { ++ /* Always start in the inactive schedule. */ ++ DWC_LIST_INSERT_TAIL(&hcd->non_periodic_sched_inactive, ++ &qh->qh_list_entry); ++ } else { ++ status = schedule_periodic(hcd, qh); ++ if ( !hcd->periodic_qh_count ) { ++ intr_mask.b.sofintr = 1; ++ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, ++ intr_mask.d32, intr_mask.d32); ++ } ++ hcd->periodic_qh_count++; ++ } ++ ++ return status; ++} ++ ++/** ++ * Removes an interrupt or isochronous transfer from the periodic schedule. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh QH for the periodic transfer. ++ */ ++static void deschedule_periodic(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ int i; ++ DWC_LIST_REMOVE_INIT(&qh->qh_list_entry); ++ ++ /* Update claimed usecs per (micro)frame. */ ++ hcd->periodic_usecs -= qh->usecs; ++ ++ if (!microframe_schedule) { ++ /* Release the periodic channel reservation. */ ++ hcd->periodic_channels--; ++ } else { ++ for (i = 0; i < 8; i++) { ++ hcd->frame_usecs[i] += qh->frame_usecs[i]; ++ qh->frame_usecs[i] = 0; ++ } ++ } ++} ++ ++/** ++ * Removes a QH from either the non-periodic or periodic schedule. Memory is ++ * not freed. ++ * ++ * @param hcd The HCD state structure. ++ * @param qh QH to remove from schedule. */ ++void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ if (DWC_LIST_EMPTY(&qh->qh_list_entry)) { ++ /* QH is not in a schedule. */ ++ return; ++ } ++ ++ if (dwc_qh_is_non_per(qh)) { ++ if (hcd->non_periodic_qh_ptr == &qh->qh_list_entry) { ++ hcd->non_periodic_qh_ptr = ++ hcd->non_periodic_qh_ptr->next; ++ } ++ DWC_LIST_REMOVE_INIT(&qh->qh_list_entry); ++ } else { ++ deschedule_periodic(hcd, qh); ++ hcd->periodic_qh_count--; ++ if( !hcd->periodic_qh_count ) { ++ intr_mask.b.sofintr = 1; ++ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ } ++ } ++} ++ ++/** ++ * Deactivates a QH. For non-periodic QHs, removes the QH from the active ++ * non-periodic schedule. The QH is added to the inactive non-periodic ++ * schedule if any QTDs are still attached to the QH. ++ * ++ * For periodic QHs, the QH is removed from the periodic queued schedule. If ++ * there are any QTDs still attached to the QH, the QH is added to either the ++ * periodic inactive schedule or the periodic ready schedule and its next ++ * scheduled frame is calculated. The QH is placed in the ready schedule if ++ * the scheduled frame has been reached already. Otherwise it's placed in the ++ * inactive schedule. If there are no QTDs attached to the QH, the QH is ++ * completely removed from the periodic schedule. ++ */ ++void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, ++ int sched_next_periodic_split) ++{ ++ if (dwc_qh_is_non_per(qh)) { ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ if (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { ++ /* Add back to inactive non-periodic schedule. */ ++ dwc_otg_hcd_qh_add(hcd, qh); ++ } ++ } else { ++ uint16_t frame_number = dwc_otg_hcd_get_frame_number(hcd); ++ ++ if (qh->do_split) { ++ /* Schedule the next continuing periodic split transfer */ ++ if (sched_next_periodic_split) { ++ ++ qh->sched_frame = frame_number; ++ if (dwc_frame_num_le(frame_number, ++ dwc_frame_num_inc ++ (qh->start_split_frame, ++ 1))) { ++ /* ++ * Allow one frame to elapse after start ++ * split microframe before scheduling ++ * complete split, but DONT if we are ++ * doing the next start split in the ++ * same frame for an ISOC out. ++ */ ++ if ((qh->ep_type != UE_ISOCHRONOUS) || ++ (qh->ep_is_in != 0)) { ++ qh->sched_frame = ++ dwc_frame_num_inc(qh->sched_frame, 1); ++ } ++ } ++ } else { ++ qh->sched_frame = ++ dwc_frame_num_inc(qh->start_split_frame, ++ qh->interval); ++ if (dwc_frame_num_le ++ (qh->sched_frame, frame_number)) { ++ qh->sched_frame = frame_number; ++ } ++ qh->sched_frame |= 0x7; ++ qh->start_split_frame = qh->sched_frame; ++ } ++ } else { ++ qh->sched_frame = ++ dwc_frame_num_inc(qh->sched_frame, qh->interval); ++ if (dwc_frame_num_le(qh->sched_frame, frame_number)) { ++ qh->sched_frame = frame_number; ++ } ++ } ++ ++ if (DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ } else { ++ /* ++ * Remove from periodic_sched_queued and move to ++ * appropriate queue. ++ */ ++ if ((microframe_schedule && dwc_frame_num_le(qh->sched_frame, frame_number)) || ++ (!microframe_schedule && qh->sched_frame == frame_number)) { ++ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_ready, ++ &qh->qh_list_entry); ++ } else { ++ DWC_LIST_MOVE_HEAD ++ (&hcd->periodic_sched_inactive, ++ &qh->qh_list_entry); ++ } ++ } ++ } ++} ++ ++/** ++ * This function allocates and initializes a QTD. ++ * ++ * @param urb The URB to create a QTD from. Each URB-QTD pair will end up ++ * pointing to each other so each pair should have a unique correlation. ++ * @param atomic_alloc Flag to do atomic alloc if needed ++ * ++ * @return Returns pointer to the newly allocated QTD, or NULL on error. */ ++dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(dwc_otg_hcd_urb_t * urb, int atomic_alloc) ++{ ++ dwc_otg_qtd_t *qtd; ++ ++ qtd = dwc_otg_hcd_qtd_alloc(atomic_alloc); ++ if (qtd == NULL) { ++ return NULL; ++ } ++ ++ dwc_otg_hcd_qtd_init(qtd, urb); ++ return qtd; ++} ++ ++/** ++ * Initializes a QTD structure. ++ * ++ * @param qtd The QTD to initialize. ++ * @param urb The URB to use for initialization. */ ++void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t * qtd, dwc_otg_hcd_urb_t * urb) ++{ ++ dwc_memset(qtd, 0, sizeof(dwc_otg_qtd_t)); ++ qtd->urb = urb; ++ if (dwc_otg_hcd_get_pipe_type(&urb->pipe_info) == UE_CONTROL) { ++ /* ++ * The only time the QTD data toggle is used is on the data ++ * phase of control transfers. This phase always starts with ++ * DATA1. ++ */ ++ qtd->data_toggle = DWC_OTG_HC_PID_DATA1; ++ qtd->control_phase = DWC_OTG_CONTROL_SETUP; ++ } ++ ++ /* start split */ ++ qtd->complete_split = 0; ++ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL; ++ qtd->isoc_split_offset = 0; ++ qtd->in_process = 0; ++ ++ /* Store the qtd ptr in the urb to reference what QTD. */ ++ urb->qtd = qtd; ++ return; ++} ++ ++/** ++ * This function adds a QTD to the QTD-list of a QH. It will find the correct ++ * QH to place the QTD into. If it does not find a QH, then it will create a ++ * new QH. If the QH to which the QTD is added is not currently scheduled, it ++ * is placed into the proper schedule based on its EP type. ++ * ++ * @param[in] qtd The QTD to add ++ * @param[in] hcd The DWC HCD structure ++ * @param[out] qh out parameter to return queue head ++ * @param atomic_alloc Flag to do atomic alloc if needed ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * qtd, ++ dwc_otg_hcd_t * hcd, dwc_otg_qh_t ** qh, int atomic_alloc) ++{ ++ int retval = 0; ++ dwc_irqflags_t flags; ++ ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ ++ /* ++ * Get the QH which holds the QTD-list to insert to. Create QH if it ++ * doesn't exist. ++ */ ++ if (*qh == NULL) { ++ *qh = dwc_otg_hcd_qh_create(hcd, urb, atomic_alloc); ++ if (*qh == NULL) { ++ retval = -1; ++ goto done; ++ } ++ } ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ retval = dwc_otg_hcd_qh_add(hcd, *qh); ++ if (retval == 0) { ++ DWC_CIRCLEQ_INSERT_TAIL(&((*qh)->qtd_list), qtd, ++ qtd_list_entry); ++ } ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ ++done: ++ ++ return retval; ++} ++ ++#endif /* DWC_DEVICE_ONLY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h +@@ -0,0 +1,185 @@ ++#ifndef _DWC_OS_DEP_H_ ++#define _DWC_OS_DEP_H_ ++ ++/** ++ * @file ++ * ++ * This file contains OS dependent structures. ++ * ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/init.h> ++#include <linux/device.h> ++#include <linux/errno.h> ++#include <linux/types.h> ++#include <linux/slab.h> ++#include <linux/list.h> ++#include <linux/interrupt.h> ++#include <linux/ctype.h> ++#include <linux/string.h> ++#include <linux/dma-mapping.h> ++#include <linux/jiffies.h> ++#include <linux/delay.h> ++#include <linux/timer.h> ++#include <linux/workqueue.h> ++#include <linux/stat.h> ++#include <linux/pci.h> ++ ++#include <linux/version.h> ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++# include <linux/irq.h> ++#endif ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) ++# include <linux/usb/ch9.h> ++#else ++# include <linux/usb_ch9.h> ++#endif ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) ++# include <linux/usb/gadget.h> ++#else ++# include <linux/usb_gadget.h> ++#endif ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++# include <asm/irq.h> ++#endif ++ ++#ifdef PCI_INTERFACE ++# include <asm/io.h> ++#endif ++ ++#ifdef LM_INTERFACE ++# include <asm/unaligned.h> ++# include <asm/sizes.h> ++# include <asm/param.h> ++# include <asm/io.h> ++# if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) ++# include <asm/arch/hardware.h> ++# include <asm/arch/lm.h> ++# include <asm/arch/irqs.h> ++# include <asm/arch/regs-irq.h> ++# else ++/* in 2.6.31, at least, we seem to have lost the generic LM infrastructure - ++ here we assume that the machine architecture provides definitions ++ in its own header ++*/ ++# include <mach/lm.h> ++# include <mach/hardware.h> ++# endif ++#endif ++ ++#ifdef PLATFORM_INTERFACE ++#include <linux/platform_device.h> ++#include <asm/mach/map.h> ++#endif ++ ++/** The OS page size */ ++#define DWC_OS_PAGE_SIZE PAGE_SIZE ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14) ++typedef int gfp_t; ++#endif ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) ++# define IRQF_SHARED SA_SHIRQ ++#endif ++ ++typedef struct os_dependent { ++ /** Base address returned from ioremap() */ ++ void *base; ++ ++ /** Register offset for Diagnostic API */ ++ uint32_t reg_offset; ++ ++#ifdef LM_INTERFACE ++ struct lm_device *lmdev; ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *pcidev; ++ ++ /** Start address of a PCI region */ ++ resource_size_t rsrc_start; ++ ++ /** Length address of a PCI region */ ++ resource_size_t rsrc_len; ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platformdev; ++#endif ++ ++} os_dependent_t; ++ ++#ifdef __cplusplus ++} ++#endif ++ ++ ++ ++/* Type for the our device on the chosen bus */ ++#if defined(LM_INTERFACE) ++typedef struct lm_device dwc_bus_dev_t; ++#elif defined(PCI_INTERFACE) ++typedef struct pci_dev dwc_bus_dev_t; ++#elif defined(PLATFORM_INTERFACE) ++typedef struct platform_device dwc_bus_dev_t; ++#endif ++ ++/* Helper macro to retrieve drvdata from the device on the chosen bus */ ++#if defined(LM_INTERFACE) ++#define DWC_OTG_BUSDRVDATA(_dev) lm_get_drvdata(_dev) ++#elif defined(PCI_INTERFACE) ++#define DWC_OTG_BUSDRVDATA(_dev) pci_get_drvdata(_dev) ++#elif defined(PLATFORM_INTERFACE) ++#define DWC_OTG_BUSDRVDATA(_dev) platform_get_drvdata(_dev) ++#endif ++ ++/** ++ * Helper macro returning the otg_device structure of a given struct device ++ * ++ * c.f. static dwc_otg_device_t *dwc_otg_drvdev(struct device *_dev) ++ */ ++#ifdef LM_INTERFACE ++#define DWC_OTG_GETDRVDEV(_var, _dev) do { \ ++ struct lm_device *lm_dev = \ ++ container_of(_dev, struct lm_device, dev); \ ++ _var = lm_get_drvdata(lm_dev); \ ++ } while (0) ++ ++#elif defined(PCI_INTERFACE) ++#define DWC_OTG_GETDRVDEV(_var, _dev) do { \ ++ _var = dev_get_drvdata(_dev); \ ++ } while (0) ++ ++#elif defined(PLATFORM_INTERFACE) ++#define DWC_OTG_GETDRVDEV(_var, _dev) do { \ ++ struct platform_device *platform_dev = \ ++ container_of(_dev, struct platform_device, dev); \ ++ _var = platform_get_drvdata(platform_dev); \ ++ } while (0) ++#endif ++ ++ ++/** ++ * Helper macro returning the struct dev of the given struct os_dependent ++ * ++ * c.f. static struct device *dwc_otg_getdev(struct os_dependent *osdep) ++ */ ++#ifdef LM_INTERFACE ++#define DWC_OTG_OS_GETDEV(_osdep) \ ++ ((_osdep).lmdev == NULL? NULL: &(_osdep).lmdev->dev) ++#elif defined(PCI_INTERFACE) ++#define DWC_OTG_OS_GETDEV(_osdep) \ ++ ((_osdep).pci_dev == NULL? NULL: &(_osdep).pci_dev->dev) ++#elif defined(PLATFORM_INTERFACE) ++#define DWC_OTG_OS_GETDEV(_osdep) \ ++ ((_osdep).platformdev == NULL? NULL: &(_osdep).platformdev->dev) ++#endif ++ ++ ++ ++ ++#endif /* _DWC_OS_DEP_H_ */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd.c +@@ -0,0 +1,2708 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.c $ ++ * $Revision: #101 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_HOST_ONLY ++ ++/** @file ++ * This file implements PCD Core. All code in this file is portable and doesn't ++ * use any OS specific functions. ++ * PCD Core provides Interface, defined in <code><dwc_otg_pcd_if.h></code> ++ * header file, which can be used to implement OS specific PCD interface. ++ * ++ * An important function of the PCD is managing interrupts generated ++ * by the DWC_otg controller. The implementation of the DWC_otg device ++ * mode interrupt service routines is in dwc_otg_pcd_intr.c. ++ * ++ * @todo Add Device Mode test modes (Test J mode, Test K mode, etc). ++ * @todo Does it work when the request size is greater than DEPTSIZ ++ * transfer size ++ * ++ */ ++ ++#include "dwc_otg_pcd.h" ++ ++#ifdef DWC_UTE_CFI ++#include "dwc_otg_cfi.h" ++ ++extern int init_cfi(cfiobject_t * cfiobj); ++#endif ++ ++/** ++ * Choose endpoint from ep arrays using usb_ep structure. ++ */ ++static dwc_otg_pcd_ep_t *get_ep_from_handle(dwc_otg_pcd_t * pcd, void *handle) ++{ ++ int i; ++ if (pcd->ep0.priv == handle) { ++ return &pcd->ep0; ++ } ++ for (i = 0; i < MAX_EPS_CHANNELS - 1; i++) { ++ if (pcd->in_ep[i].priv == handle) ++ return &pcd->in_ep[i]; ++ if (pcd->out_ep[i].priv == handle) ++ return &pcd->out_ep[i]; ++ } ++ ++ return NULL; ++} ++ ++/** ++ * This function completes a request. It call's the request call back. ++ */ ++void dwc_otg_request_done(dwc_otg_pcd_ep_t * ep, dwc_otg_pcd_request_t * req, ++ int32_t status) ++{ ++ unsigned stopped = ep->stopped; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(ep %p req %p)\n", __func__, ep, req); ++ DWC_CIRCLEQ_REMOVE_INIT(&ep->queue, req, queue_entry); ++ ++ /* don't modify queue heads during completion callback */ ++ ep->stopped = 1; ++ /* spin_unlock/spin_lock now done in fops->complete() */ ++ ep->pcd->fops->complete(ep->pcd, ep->priv, req->priv, status, ++ req->actual); ++ ++ if (ep->pcd->request_pending > 0) { ++ --ep->pcd->request_pending; ++ } ++ ++ ep->stopped = stopped; ++ DWC_FREE(req); ++} ++ ++/** ++ * This function terminates all the requsts in the EP request queue. ++ */ ++void dwc_otg_request_nuke(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_otg_pcd_request_t *req; ++ ++ ep->stopped = 1; ++ ++ /* called with irqs blocked?? */ ++ while (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ dwc_otg_request_done(ep, req, -DWC_E_SHUTDOWN); ++ } ++} ++ ++void dwc_otg_pcd_start(dwc_otg_pcd_t * pcd, ++ const struct dwc_otg_pcd_function_ops *fops) ++{ ++ pcd->fops = fops; ++} ++ ++/** ++ * PCD Callback function for initializing the PCD when switching to ++ * device mode. ++ * ++ * @param p void pointer to the <code>dwc_otg_pcd_t</code> ++ */ ++static int32_t dwc_otg_pcd_start_cb(void *p) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ ++ /* ++ * Initialized the Core for Device mode. ++ */ ++ if (dwc_otg_is_device_mode(core_if)) { ++ dwc_otg_core_dev_init(core_if); ++ /* Set core_if's lock pointer to the pcd->lock */ ++ core_if->lock = pcd->lock; ++ } ++ return 1; ++} ++ ++/** CFI-specific buffer allocation function for EP */ ++#ifdef DWC_UTE_CFI ++uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, dwc_dma_t * addr, ++ size_t buflen, int flags) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ ep = get_ep_from_handle(pcd, pep); ++ if (!ep) { ++ DWC_WARN("bad ep\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ return pcd->cfi->ops.ep_alloc_buf(pcd->cfi, pcd, ep, addr, buflen, ++ flags); ++} ++#else ++uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, dwc_dma_t * addr, ++ size_t buflen, int flags); ++#endif ++ ++/** ++ * PCD Callback function for notifying the PCD when resuming from ++ * suspend. ++ * ++ * @param p void pointer to the <code>dwc_otg_pcd_t</code> ++ */ ++static int32_t dwc_otg_pcd_resume_cb(void *p) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p; ++ ++ if (pcd->fops->resume) { ++ pcd->fops->resume(pcd); ++ } ++ ++ /* Stop the SRP timeout timer. */ ++ if ((GET_CORE_IF(pcd)->core_params->phy_type != DWC_PHY_TYPE_PARAM_FS) ++ || (!GET_CORE_IF(pcd)->core_params->i2c_enable)) { ++ if (GET_CORE_IF(pcd)->srp_timer_started) { ++ GET_CORE_IF(pcd)->srp_timer_started = 0; ++ DWC_TIMER_CANCEL(GET_CORE_IF(pcd)->srp_timer); ++ } ++ } ++ return 1; ++} ++ ++/** ++ * PCD Callback function for notifying the PCD device is suspended. ++ * ++ * @param p void pointer to the <code>dwc_otg_pcd_t</code> ++ */ ++static int32_t dwc_otg_pcd_suspend_cb(void *p) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p; ++ ++ if (pcd->fops->suspend) { ++ DWC_SPINUNLOCK(pcd->lock); ++ pcd->fops->suspend(pcd); ++ DWC_SPINLOCK(pcd->lock); ++ } ++ ++ return 1; ++} ++ ++/** ++ * PCD Callback function for stopping the PCD when switching to Host ++ * mode. ++ * ++ * @param p void pointer to the <code>dwc_otg_pcd_t</code> ++ */ ++static int32_t dwc_otg_pcd_stop_cb(void *p) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p; ++ extern void dwc_otg_pcd_stop(dwc_otg_pcd_t * _pcd); ++ ++ dwc_otg_pcd_stop(pcd); ++ return 1; ++} ++ ++/** ++ * PCD Callback structure for handling mode switching. ++ */ ++static dwc_otg_cil_callbacks_t pcd_callbacks = { ++ .start = dwc_otg_pcd_start_cb, ++ .stop = dwc_otg_pcd_stop_cb, ++ .suspend = dwc_otg_pcd_suspend_cb, ++ .resume_wakeup = dwc_otg_pcd_resume_cb, ++ .p = 0, /* Set at registration */ ++}; ++ ++/** ++ * This function allocates a DMA Descriptor chain for the Endpoint ++ * buffer to be used for a transfer to/from the specified endpoint. ++ */ ++dwc_otg_dev_dma_desc_t *dwc_otg_ep_alloc_desc_chain(dwc_dma_t * dma_desc_addr, ++ uint32_t count) ++{ ++ return DWC_DMA_ALLOC_ATOMIC(count * sizeof(dwc_otg_dev_dma_desc_t), ++ dma_desc_addr); ++} ++ ++/** ++ * This function frees a DMA Descriptor chain that was allocated by ep_alloc_desc. ++ */ ++void dwc_otg_ep_free_desc_chain(dwc_otg_dev_dma_desc_t * desc_addr, ++ uint32_t dma_desc_addr, uint32_t count) ++{ ++ DWC_DMA_FREE(count * sizeof(dwc_otg_dev_dma_desc_t), desc_addr, ++ dma_desc_addr); ++} ++ ++#ifdef DWC_EN_ISOC ++ ++/** ++ * This function initializes a descriptor chain for Isochronous transfer ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dwc_ep The EP to start the transfer on. ++ * ++ */ ++void dwc_otg_iso_ep_start_ddma_transfer(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * dwc_ep) ++{ ++ ++ dsts_data_t dsts = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ volatile uint32_t *addr; ++ int i, j; ++ uint32_t len; ++ ++ if (dwc_ep->is_in) ++ dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl / dwc_ep->bInterval; ++ else ++ dwc_ep->desc_cnt = ++ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / ++ dwc_ep->bInterval; ++ ++ /** Allocate descriptors for double buffering */ ++ dwc_ep->iso_desc_addr = ++ dwc_otg_ep_alloc_desc_chain(&dwc_ep->iso_dma_desc_addr, ++ dwc_ep->desc_cnt * 2); ++ if (dwc_ep->desc_addr) { ++ DWC_WARN("%s, can't allocate DMA descriptor chain\n", __func__); ++ return; ++ } ++ ++ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ /** ISO OUT EP */ ++ if (dwc_ep->is_in == 0) { ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ dwc_otg_dev_dma_desc_t *dma_desc = dwc_ep->iso_desc_addr; ++ dma_addr_t dma_ad; ++ uint32_t data_per_desc; ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[dwc_ep->num]; ++ int offset; ++ ++ addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl; ++ dma_ad = (dma_addr_t) DWC_READ_REG32(&(out_regs->doepdma)); ++ ++ /** Buffer 0 descriptors setup */ ++ dma_ad = dwc_ep->dma_addr0; ++ ++ sts.b_iso_out.bs = BS_HOST_READY; ++ sts.b_iso_out.rxsts = 0; ++ sts.b_iso_out.l = 0; ++ sts.b_iso_out.sp = 0; ++ sts.b_iso_out.ioc = 0; ++ sts.b_iso_out.pid = 0; ++ sts.b_iso_out.framenum = 0; ++ ++ offset = 0; ++ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; ++ i += dwc_ep->pkt_per_frm) { ++ ++ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) { ++ uint32_t len = (j + 1) * dwc_ep->maxpacket; ++ if (len > dwc_ep->data_per_frame) ++ data_per_desc = ++ dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket; ++ else ++ data_per_desc = dwc_ep->maxpacket; ++ len = data_per_desc % 4; ++ if (len) ++ data_per_desc += 4 - len; ++ ++ sts.b_iso_out.rxbytes = data_per_desc; ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ offset += data_per_desc; ++ dma_desc++; ++ dma_ad += data_per_desc; ++ } ++ } ++ ++ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) { ++ uint32_t len = (j + 1) * dwc_ep->maxpacket; ++ if (len > dwc_ep->data_per_frame) ++ data_per_desc = ++ dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket; ++ else ++ data_per_desc = dwc_ep->maxpacket; ++ len = data_per_desc % 4; ++ if (len) ++ data_per_desc += 4 - len; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ offset += data_per_desc; ++ dma_desc++; ++ dma_ad += data_per_desc; ++ } ++ ++ sts.b_iso_out.ioc = 1; ++ len = (j + 1) * dwc_ep->maxpacket; ++ if (len > dwc_ep->data_per_frame) ++ data_per_desc = ++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket; ++ else ++ data_per_desc = dwc_ep->maxpacket; ++ len = data_per_desc % 4; ++ if (len) ++ data_per_desc += 4 - len; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ dma_desc++; ++ ++ /** Buffer 1 descriptors setup */ ++ sts.b_iso_out.ioc = 0; ++ dma_ad = dwc_ep->dma_addr1; ++ ++ offset = 0; ++ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; ++ i += dwc_ep->pkt_per_frm) { ++ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) { ++ uint32_t len = (j + 1) * dwc_ep->maxpacket; ++ if (len > dwc_ep->data_per_frame) ++ data_per_desc = ++ dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket; ++ else ++ data_per_desc = dwc_ep->maxpacket; ++ len = data_per_desc % 4; ++ if (len) ++ data_per_desc += 4 - len; ++ ++ data_per_desc = ++ sts.b_iso_out.rxbytes = data_per_desc; ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ offset += data_per_desc; ++ dma_desc++; ++ dma_ad += data_per_desc; ++ } ++ } ++ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) { ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ offset += data_per_desc; ++ dma_desc++; ++ dma_ad += data_per_desc; ++ } ++ ++ sts.b_iso_out.ioc = 1; ++ sts.b_iso_out.l = 1; ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ dwc_ep->next_frame = 0; ++ ++ /** Write dma_ad into DOEPDMA register */ ++ DWC_WRITE_REG32(&(out_regs->doepdma), ++ (uint32_t) dwc_ep->iso_dma_desc_addr); ++ ++ } ++ /** ISO IN EP */ ++ else { ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ dwc_otg_dev_dma_desc_t *dma_desc = dwc_ep->iso_desc_addr; ++ dma_addr_t dma_ad; ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[dwc_ep->num]; ++ unsigned int frmnumber; ++ fifosize_data_t txfifosize, rxfifosize; ++ ++ txfifosize.d32 = ++ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[dwc_ep->num]-> ++ dtxfsts); ++ rxfifosize.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); ++ ++ addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl; ++ ++ dma_ad = dwc_ep->dma_addr0; ++ ++ dsts.d32 = ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ sts.b_iso_in.bs = BS_HOST_READY; ++ sts.b_iso_in.txsts = 0; ++ sts.b_iso_in.sp = ++ (dwc_ep->data_per_frame % dwc_ep->maxpacket) ? 1 : 0; ++ sts.b_iso_in.ioc = 0; ++ sts.b_iso_in.pid = dwc_ep->pkt_per_frm; ++ ++ frmnumber = dwc_ep->next_frame; ++ ++ sts.b_iso_in.framenum = frmnumber; ++ sts.b_iso_in.txbytes = dwc_ep->data_per_frame; ++ sts.b_iso_in.l = 0; ++ ++ /** Buffer 0 descriptors setup */ ++ for (i = 0; i < dwc_ep->desc_cnt - 1; i++) { ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ dma_desc++; ++ ++ dma_ad += dwc_ep->data_per_frame; ++ sts.b_iso_in.framenum += dwc_ep->bInterval; ++ } ++ ++ sts.b_iso_in.ioc = 1; ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++dma_desc; ++ ++ /** Buffer 1 descriptors setup */ ++ sts.b_iso_in.ioc = 0; ++ dma_ad = dwc_ep->dma_addr1; ++ ++ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; ++ i += dwc_ep->pkt_per_frm) { ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ dma_desc++; ++ ++ dma_ad += dwc_ep->data_per_frame; ++ sts.b_iso_in.framenum += dwc_ep->bInterval; ++ ++ sts.b_iso_in.ioc = 0; ++ } ++ sts.b_iso_in.ioc = 1; ++ sts.b_iso_in.l = 1; ++ ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval; ++ ++ /** Write dma_ad into diepdma register */ ++ DWC_WRITE_REG32(&(in_regs->diepdma), ++ (uint32_t) dwc_ep->iso_dma_desc_addr); ++ } ++ /** Enable endpoint, clear nak */ ++ depctl.d32 = 0; ++ depctl.b.epena = 1; ++ depctl.b.usbactep = 1; ++ depctl.b.cnak = 1; ++ ++ DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32); ++ depctl.d32 = DWC_READ_REG32(addr); ++} ++ ++/** ++ * This function initializes a descriptor chain for Isochronous transfer ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * ep) ++{ ++ depctl_data_t depctl = {.d32 = 0 }; ++ volatile uint32_t *addr; ++ ++ if (ep->is_in) { ++ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; ++ } else { ++ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; ++ } ++ ++ if (core_if->dma_enable == 0 || core_if->dma_desc_enable != 0) { ++ return; ++ } else { ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ ++ ep->xfer_len = ++ ep->data_per_frame * ep->buf_proc_intrvl / ep->bInterval; ++ ep->pkt_cnt = ++ (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket; ++ ep->xfer_count = 0; ++ ep->xfer_buff = ++ (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0; ++ ep->dma_addr = ++ (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0; ++ ++ if (ep->is_in) { ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ deptsiz.b.mc = ep->pkt_per_frm; ++ deptsiz.b.xfersize = ep->xfer_len; ++ deptsiz.b.pktcnt = ++ (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket; ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ dieptsiz, deptsiz.d32); ++ ++ /* Write the DMA register */ ++ DWC_WRITE_REG32(& ++ (core_if->dev_if->in_ep_regs[ep->num]-> ++ diepdma), (uint32_t) ep->dma_addr); ++ ++ } else { ++ deptsiz.b.pktcnt = ++ (ep->xfer_len + (ep->maxpacket - 1)) / ++ ep->maxpacket; ++ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket; ++ ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]-> ++ doeptsiz, deptsiz.d32); ++ ++ /* Write the DMA register */ ++ DWC_WRITE_REG32(& ++ (core_if->dev_if->out_ep_regs[ep->num]-> ++ doepdma), (uint32_t) ep->dma_addr); ++ ++ } ++ /** Enable endpoint, clear nak */ ++ depctl.d32 = 0; ++ depctl.b.epena = 1; ++ depctl.b.cnak = 1; ++ ++ DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32); ++ } ++} ++ ++/** ++ * This function does the setup for a data transfer for an EP and ++ * starts the transfer. For an IN transfer, the packets will be ++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, ++ * the packets are unloaded from the Rx FIFO in the ISR. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ */ ++ ++static void dwc_otg_iso_ep_start_transfer(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * ep) ++{ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable) { ++ if (ep->is_in) { ++ ep->desc_cnt = ep->pkt_cnt / ep->pkt_per_frm; ++ } else { ++ ep->desc_cnt = ep->pkt_cnt; ++ } ++ dwc_otg_iso_ep_start_ddma_transfer(core_if, ep); ++ } else { ++ if (core_if->pti_enh_enable) { ++ dwc_otg_iso_ep_start_buf_transfer(core_if, ep); ++ } else { ++ ep->cur_pkt_addr = ++ (ep->proc_buf_num) ? ep->xfer_buff1 : ep-> ++ xfer_buff0; ++ ep->cur_pkt_dma_addr = ++ (ep->proc_buf_num) ? ep->dma_addr1 : ep-> ++ dma_addr0; ++ dwc_otg_iso_ep_start_frm_transfer(core_if, ep); ++ } ++ } ++ } else { ++ ep->cur_pkt_addr = ++ (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0; ++ ep->cur_pkt_dma_addr = ++ (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0; ++ dwc_otg_iso_ep_start_frm_transfer(core_if, ep); ++ } ++} ++ ++/** ++ * This function stops transfer for an EP and ++ * resets the ep's variables. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ */ ++ ++void dwc_otg_iso_ep_stop_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl = {.d32 = 0 }; ++ volatile uint32_t *addr; ++ ++ if (ep->is_in == 1) { ++ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; ++ } else { ++ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; ++ } ++ ++ /* disable the ep */ ++ depctl.d32 = DWC_READ_REG32(addr); ++ ++ depctl.b.epdis = 1; ++ depctl.b.snak = 1; ++ ++ DWC_WRITE_REG32(addr, depctl.d32); ++ ++ if (core_if->dma_desc_enable && ++ ep->iso_desc_addr && ep->iso_dma_desc_addr) { ++ dwc_otg_ep_free_desc_chain(ep->iso_desc_addr, ++ ep->iso_dma_desc_addr, ++ ep->desc_cnt * 2); ++ } ++ ++ /* reset varibales */ ++ ep->dma_addr0 = 0; ++ ep->dma_addr1 = 0; ++ ep->xfer_buff0 = 0; ++ ep->xfer_buff1 = 0; ++ ep->data_per_frame = 0; ++ ep->data_pattern_frame = 0; ++ ep->sync_frame = 0; ++ ep->buf_proc_intrvl = 0; ++ ep->bInterval = 0; ++ ep->proc_buf_num = 0; ++ ep->pkt_per_frm = 0; ++ ep->pkt_per_frm = 0; ++ ep->desc_cnt = 0; ++ ep->iso_desc_addr = 0; ++ ep->iso_dma_desc_addr = 0; ++} ++ ++int dwc_otg_pcd_iso_ep_start(dwc_otg_pcd_t * pcd, void *ep_handle, ++ uint8_t * buf0, uint8_t * buf1, dwc_dma_t dma0, ++ dwc_dma_t dma1, int sync_frame, int dp_frame, ++ int data_per_frame, int start_frame, ++ int buf_proc_intrvl, void *req_handle, ++ int atomic_alloc) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ dwc_irqflags_t flags = 0; ++ dwc_ep_t *dwc_ep; ++ int32_t frm_data; ++ dsts_data_t dsts; ++ dwc_otg_core_if_t *core_if; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ ++ if (!ep || !ep->desc || ep->dwc_ep.num == 0) { ++ DWC_WARN("bad ep\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ core_if = GET_CORE_IF(pcd); ++ dwc_ep = &ep->dwc_ep; ++ ++ if (ep->iso_req_handle) { ++ DWC_WARN("ISO request in progress\n"); ++ } ++ ++ dwc_ep->dma_addr0 = dma0; ++ dwc_ep->dma_addr1 = dma1; ++ ++ dwc_ep->xfer_buff0 = buf0; ++ dwc_ep->xfer_buff1 = buf1; ++ ++ dwc_ep->data_per_frame = data_per_frame; ++ ++ /** @todo - pattern data support is to be implemented in the future */ ++ dwc_ep->data_pattern_frame = dp_frame; ++ dwc_ep->sync_frame = sync_frame; ++ ++ dwc_ep->buf_proc_intrvl = buf_proc_intrvl; ++ ++ dwc_ep->bInterval = 1 << (ep->desc->bInterval - 1); ++ ++ dwc_ep->proc_buf_num = 0; ++ ++ dwc_ep->pkt_per_frm = 0; ++ frm_data = ep->dwc_ep.data_per_frame; ++ while (frm_data > 0) { ++ dwc_ep->pkt_per_frm++; ++ frm_data -= ep->dwc_ep.maxpacket; ++ } ++ ++ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ if (start_frame == -1) { ++ dwc_ep->next_frame = dsts.b.soffn + 1; ++ if (dwc_ep->bInterval != 1) { ++ dwc_ep->next_frame = ++ dwc_ep->next_frame + (dwc_ep->bInterval - 1 - ++ dwc_ep->next_frame % ++ dwc_ep->bInterval); ++ } ++ } else { ++ dwc_ep->next_frame = start_frame; ++ } ++ ++ if (!core_if->pti_enh_enable) { ++ dwc_ep->pkt_cnt = ++ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / ++ dwc_ep->bInterval; ++ } else { ++ dwc_ep->pkt_cnt = ++ (dwc_ep->data_per_frame * ++ (dwc_ep->buf_proc_intrvl / dwc_ep->bInterval) ++ - 1 + dwc_ep->maxpacket) / dwc_ep->maxpacket; ++ } ++ ++ if (core_if->dma_desc_enable) { ++ dwc_ep->desc_cnt = ++ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / ++ dwc_ep->bInterval; ++ } ++ ++ if (atomic_alloc) { ++ dwc_ep->pkt_info = ++ DWC_ALLOC_ATOMIC(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt); ++ } else { ++ dwc_ep->pkt_info = ++ DWC_ALLOC(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt); ++ } ++ if (!dwc_ep->pkt_info) { ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ return -DWC_E_NO_MEMORY; ++ } ++ if (core_if->pti_enh_enable) { ++ dwc_memset(dwc_ep->pkt_info, 0, ++ sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt); ++ } ++ ++ dwc_ep->cur_pkt = 0; ++ ep->iso_req_handle = req_handle; ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ dwc_otg_iso_ep_start_transfer(core_if, dwc_ep); ++ return 0; ++} ++ ++int dwc_otg_pcd_iso_ep_stop(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle) ++{ ++ dwc_irqflags_t flags = 0; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ if (!ep || !ep->desc || ep->dwc_ep.num == 0) { ++ DWC_WARN("bad ep\n"); ++ return -DWC_E_INVALID; ++ } ++ dwc_ep = &ep->dwc_ep; ++ ++ dwc_otg_iso_ep_stop_transfer(GET_CORE_IF(pcd), dwc_ep); ++ ++ DWC_FREE(dwc_ep->pkt_info); ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ if (ep->iso_req_handle != req_handle) { ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ ep->iso_req_handle = 0; ++ return 0; ++} ++ ++/** ++ * This function is used for perodical data exchnage between PCD and gadget drivers. ++ * for Isochronous EPs ++ * ++ * - Every time a sync period completes this function is called to ++ * perform data exchange between PCD and gadget ++ */ ++void dwc_otg_iso_buffer_done(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep, ++ void *req_handle) ++{ ++ int i; ++ dwc_ep_t *dwc_ep; ++ ++ dwc_ep = &ep->dwc_ep; ++ ++ DWC_SPINUNLOCK(ep->pcd->lock); ++ pcd->fops->isoc_complete(pcd, ep->priv, ep->iso_req_handle, ++ dwc_ep->proc_buf_num ^ 0x1); ++ DWC_SPINLOCK(ep->pcd->lock); ++ ++ for (i = 0; i < dwc_ep->pkt_cnt; ++i) { ++ dwc_ep->pkt_info[i].status = 0; ++ dwc_ep->pkt_info[i].offset = 0; ++ dwc_ep->pkt_info[i].length = 0; ++ } ++} ++ ++int dwc_otg_pcd_get_iso_packet_count(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *iso_req_handle) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ if (!ep->desc || ep->dwc_ep.num == 0) { ++ DWC_WARN("bad ep\n"); ++ return -DWC_E_INVALID; ++ } ++ dwc_ep = &ep->dwc_ep; ++ ++ return dwc_ep->pkt_cnt; ++} ++ ++void dwc_otg_pcd_get_iso_packet_params(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *iso_req_handle, int packet, ++ int *status, int *actual, int *offset) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ if (!ep) ++ DWC_WARN("bad ep\n"); ++ ++ dwc_ep = &ep->dwc_ep; ++ ++ *status = dwc_ep->pkt_info[packet].status; ++ *actual = dwc_ep->pkt_info[packet].length; ++ *offset = dwc_ep->pkt_info[packet].offset; ++} ++ ++#endif /* DWC_EN_ISOC */ ++ ++static void dwc_otg_pcd_init_ep(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * pcd_ep, ++ uint32_t is_in, uint32_t ep_num) ++{ ++ /* Init EP structure */ ++ pcd_ep->desc = 0; ++ pcd_ep->pcd = pcd; ++ pcd_ep->stopped = 1; ++ pcd_ep->queue_sof = 0; ++ ++ /* Init DWC ep structure */ ++ pcd_ep->dwc_ep.is_in = is_in; ++ pcd_ep->dwc_ep.num = ep_num; ++ pcd_ep->dwc_ep.active = 0; ++ pcd_ep->dwc_ep.tx_fifo_num = 0; ++ /* Control until ep is actvated */ ++ pcd_ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; ++ pcd_ep->dwc_ep.maxpacket = MAX_PACKET_SIZE; ++ pcd_ep->dwc_ep.dma_addr = 0; ++ pcd_ep->dwc_ep.start_xfer_buff = 0; ++ pcd_ep->dwc_ep.xfer_buff = 0; ++ pcd_ep->dwc_ep.xfer_len = 0; ++ pcd_ep->dwc_ep.xfer_count = 0; ++ pcd_ep->dwc_ep.sent_zlp = 0; ++ pcd_ep->dwc_ep.total_len = 0; ++ pcd_ep->dwc_ep.desc_addr = 0; ++ pcd_ep->dwc_ep.dma_desc_addr = 0; ++ DWC_CIRCLEQ_INIT(&pcd_ep->queue); ++} ++ ++/** ++ * Initialize ep's ++ */ ++static void dwc_otg_pcd_reinit(dwc_otg_pcd_t * pcd) ++{ ++ int i; ++ uint32_t hwcfg1; ++ dwc_otg_pcd_ep_t *ep; ++ int in_ep_cntr, out_ep_cntr; ++ uint32_t num_in_eps = (GET_CORE_IF(pcd))->dev_if->num_in_eps; ++ uint32_t num_out_eps = (GET_CORE_IF(pcd))->dev_if->num_out_eps; ++ ++ /** ++ * Initialize the EP0 structure. ++ */ ++ ep = &pcd->ep0; ++ dwc_otg_pcd_init_ep(pcd, ep, 0, 0); ++ ++ in_ep_cntr = 0; ++ hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 3; ++ for (i = 1; in_ep_cntr < num_in_eps; i++) { ++ if ((hwcfg1 & 0x1) == 0) { ++ dwc_otg_pcd_ep_t *ep = &pcd->in_ep[in_ep_cntr]; ++ in_ep_cntr++; ++ /** ++ * @todo NGS: Add direction to EP, based on contents ++ * of HWCFG1. Need a copy of HWCFG1 in pcd structure? ++ * sprintf(";r ++ */ ++ dwc_otg_pcd_init_ep(pcd, ep, 1 /* IN */ , i); ++ ++ DWC_CIRCLEQ_INIT(&ep->queue); ++ } ++ hwcfg1 >>= 2; ++ } ++ ++ out_ep_cntr = 0; ++ hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 2; ++ for (i = 1; out_ep_cntr < num_out_eps; i++) { ++ if ((hwcfg1 & 0x1) == 0) { ++ dwc_otg_pcd_ep_t *ep = &pcd->out_ep[out_ep_cntr]; ++ out_ep_cntr++; ++ /** ++ * @todo NGS: Add direction to EP, based on contents ++ * of HWCFG1. Need a copy of HWCFG1 in pcd structure? ++ * sprintf(";r ++ */ ++ dwc_otg_pcd_init_ep(pcd, ep, 0 /* OUT */ , i); ++ DWC_CIRCLEQ_INIT(&ep->queue); ++ } ++ hwcfg1 >>= 2; ++ } ++ ++ pcd->ep0state = EP0_DISCONNECT; ++ pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE; ++ pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; ++} ++ ++/** ++ * This function is called when the SRP timer expires. The SRP should ++ * complete within 6 seconds. ++ */ ++static void srp_timeout(void *ptr) ++{ ++ gotgctl_data_t gotgctl; ++ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr; ++ volatile uint32_t *addr = &core_if->core_global_regs->gotgctl; ++ ++ gotgctl.d32 = DWC_READ_REG32(addr); ++ ++ core_if->srp_timer_started = 0; ++ ++ if (core_if->adp_enable) { ++ if (gotgctl.b.bsesvld == 0) { ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ DWC_PRINTF("SRP Timeout BSESSVLD = 0\n"); ++ /* Power off the core */ ++ if (core_if->power_down == 2) { ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs->gpwrdn, ++ gpwrdn.d32, 0); ++ } ++ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, ++ gpwrdn.d32); ++ dwc_otg_adp_probe_start(core_if); ++ } else { ++ DWC_PRINTF("SRP Timeout BSESSVLD = 1\n"); ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ } ++ } ++ ++ if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) && ++ (core_if->core_params->i2c_enable)) { ++ DWC_PRINTF("SRP Timeout\n"); ++ ++ if ((core_if->srp_success) && (gotgctl.b.bsesvld)) { ++ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { ++ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); ++ } ++ ++ /* Clear Session Request */ ++ gotgctl.d32 = 0; ++ gotgctl.b.sesreq = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gotgctl, ++ gotgctl.d32, 0); ++ ++ core_if->srp_success = 0; ++ } else { ++ __DWC_ERROR("Device not connected/responding\n"); ++ gotgctl.b.sesreq = 0; ++ DWC_WRITE_REG32(addr, gotgctl.d32); ++ } ++ } else if (gotgctl.b.sesreq) { ++ DWC_PRINTF("SRP Timeout\n"); ++ ++ __DWC_ERROR("Device not connected/responding\n"); ++ gotgctl.b.sesreq = 0; ++ DWC_WRITE_REG32(addr, gotgctl.d32); ++ } else { ++ DWC_PRINTF(" SRP GOTGCTL=%0x\n", gotgctl.d32); ++ } ++} ++ ++/** ++ * Tasklet ++ * ++ */ ++extern void start_next_request(dwc_otg_pcd_ep_t * ep); ++ ++static void start_xfer_tasklet_func(void *data) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) data; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ ++ int i; ++ depctl_data_t diepctl; ++ ++ DWC_DEBUGPL(DBG_PCDV, "Start xfer tasklet\n"); ++ ++ diepctl.d32 = DWC_READ_REG32(&core_if->dev_if->in_ep_regs[0]->diepctl); ++ ++ if (pcd->ep0.queue_sof) { ++ pcd->ep0.queue_sof = 0; ++ start_next_request(&pcd->ep0); ++ // break; ++ } ++ ++ for (i = 0; i < core_if->dev_if->num_in_eps; i++) { ++ depctl_data_t diepctl; ++ diepctl.d32 = ++ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl); ++ ++ if (pcd->in_ep[i].queue_sof) { ++ pcd->in_ep[i].queue_sof = 0; ++ start_next_request(&pcd->in_ep[i]); ++ // break; ++ } ++ } ++ ++ return; ++} ++ ++/** ++ * This function initialized the PCD portion of the driver. ++ * ++ */ ++dwc_otg_pcd_t *dwc_otg_pcd_init(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_pcd_t *pcd = NULL; ++ dwc_otg_dev_if_t *dev_if; ++ int i; ++ ++ /* ++ * Allocate PCD structure ++ */ ++ pcd = DWC_ALLOC(sizeof(dwc_otg_pcd_t)); ++ ++ if (pcd == NULL) { ++ return NULL; ++ } ++ ++ pcd->lock = DWC_SPINLOCK_ALLOC(); ++ DWC_DEBUGPL(DBG_HCDV, "Init of PCD %p given core_if %p\n", ++ pcd, core_if);//GRAYG ++ if (!pcd->lock) { ++ DWC_ERROR("Could not allocate lock for pcd"); ++ DWC_FREE(pcd); ++ return NULL; ++ } ++ /* Set core_if's lock pointer to hcd->lock */ ++ core_if->lock = pcd->lock; ++ pcd->core_if = core_if; ++ ++ dev_if = core_if->dev_if; ++ dev_if->isoc_ep = NULL; ++ ++ if (core_if->hwcfg4.b.ded_fifo_en) { ++ DWC_PRINTF("Dedicated Tx FIFOs mode\n"); ++ } else { ++ DWC_PRINTF("Shared Tx FIFO mode\n"); ++ } ++ ++ /* ++ * Initialized the Core for Device mode here if there is nod ADP support. ++ * Otherwise it will be done later in dwc_otg_adp_start routine. ++ */ ++ if (dwc_otg_is_device_mode(core_if) /*&& !core_if->adp_enable*/) { ++ dwc_otg_core_dev_init(core_if); ++ } ++ ++ /* ++ * Register the PCD Callbacks. ++ */ ++ dwc_otg_cil_register_pcd_callbacks(core_if, &pcd_callbacks, pcd); ++ ++ /* ++ * Initialize the DMA buffer for SETUP packets ++ */ ++ if (GET_CORE_IF(pcd)->dma_enable) { ++ pcd->setup_pkt = ++ DWC_DMA_ALLOC(sizeof(*pcd->setup_pkt) * 5, ++ &pcd->setup_pkt_dma_handle); ++ if (pcd->setup_pkt == NULL) { ++ DWC_FREE(pcd); ++ return NULL; ++ } ++ ++ pcd->status_buf = ++ DWC_DMA_ALLOC(sizeof(uint16_t), ++ &pcd->status_buf_dma_handle); ++ if (pcd->status_buf == NULL) { ++ DWC_DMA_FREE(sizeof(*pcd->setup_pkt) * 5, ++ pcd->setup_pkt, pcd->setup_pkt_dma_handle); ++ DWC_FREE(pcd); ++ return NULL; ++ } ++ ++ if (GET_CORE_IF(pcd)->dma_desc_enable) { ++ dev_if->setup_desc_addr[0] = ++ dwc_otg_ep_alloc_desc_chain ++ (&dev_if->dma_setup_desc_addr[0], 1); ++ dev_if->setup_desc_addr[1] = ++ dwc_otg_ep_alloc_desc_chain ++ (&dev_if->dma_setup_desc_addr[1], 1); ++ dev_if->in_desc_addr = ++ dwc_otg_ep_alloc_desc_chain ++ (&dev_if->dma_in_desc_addr, 1); ++ dev_if->out_desc_addr = ++ dwc_otg_ep_alloc_desc_chain ++ (&dev_if->dma_out_desc_addr, 1); ++ pcd->data_terminated = 0; ++ ++ if (dev_if->setup_desc_addr[0] == 0 ++ || dev_if->setup_desc_addr[1] == 0 ++ || dev_if->in_desc_addr == 0 ++ || dev_if->out_desc_addr == 0) { ++ ++ if (dev_if->out_desc_addr) ++ dwc_otg_ep_free_desc_chain ++ (dev_if->out_desc_addr, ++ dev_if->dma_out_desc_addr, 1); ++ if (dev_if->in_desc_addr) ++ dwc_otg_ep_free_desc_chain ++ (dev_if->in_desc_addr, ++ dev_if->dma_in_desc_addr, 1); ++ if (dev_if->setup_desc_addr[1]) ++ dwc_otg_ep_free_desc_chain ++ (dev_if->setup_desc_addr[1], ++ dev_if->dma_setup_desc_addr[1], 1); ++ if (dev_if->setup_desc_addr[0]) ++ dwc_otg_ep_free_desc_chain ++ (dev_if->setup_desc_addr[0], ++ dev_if->dma_setup_desc_addr[0], 1); ++ ++ DWC_DMA_FREE(sizeof(*pcd->setup_pkt) * 5, ++ pcd->setup_pkt, ++ pcd->setup_pkt_dma_handle); ++ DWC_DMA_FREE(sizeof(*pcd->status_buf), ++ pcd->status_buf, ++ pcd->status_buf_dma_handle); ++ ++ DWC_FREE(pcd); ++ ++ return NULL; ++ } ++ } ++ } else { ++ pcd->setup_pkt = DWC_ALLOC(sizeof(*pcd->setup_pkt) * 5); ++ if (pcd->setup_pkt == NULL) { ++ DWC_FREE(pcd); ++ return NULL; ++ } ++ ++ pcd->status_buf = DWC_ALLOC(sizeof(uint16_t)); ++ if (pcd->status_buf == NULL) { ++ DWC_FREE(pcd->setup_pkt); ++ DWC_FREE(pcd); ++ return NULL; ++ } ++ } ++ ++ dwc_otg_pcd_reinit(pcd); ++ ++ /* Allocate the cfi object for the PCD */ ++#ifdef DWC_UTE_CFI ++ pcd->cfi = DWC_ALLOC(sizeof(cfiobject_t)); ++ if (NULL == pcd->cfi) ++ goto fail; ++ if (init_cfi(pcd->cfi)) { ++ CFI_INFO("%s: Failed to init the CFI object\n", __func__); ++ goto fail; ++ } ++#endif ++ ++ /* Initialize tasklets */ ++ pcd->start_xfer_tasklet = DWC_TASK_ALLOC("xfer_tasklet", ++ start_xfer_tasklet_func, pcd); ++ pcd->test_mode_tasklet = DWC_TASK_ALLOC("test_mode_tasklet", ++ do_test_mode, pcd); ++ ++ /* Initialize SRP timer */ ++ core_if->srp_timer = DWC_TIMER_ALLOC("SRP TIMER", srp_timeout, core_if); ++ ++ if (core_if->core_params->dev_out_nak) { ++ /** ++ * Initialize xfer timeout timer. Implemented for ++ * 2.93a feature "Device DDMA OUT NAK Enhancement" ++ */ ++ for(i = 0; i < MAX_EPS_CHANNELS; i++) { ++ pcd->core_if->ep_xfer_timer[i] = ++ DWC_TIMER_ALLOC("ep timer", ep_xfer_timeout, ++ &pcd->core_if->ep_xfer_info[i]); ++ } ++ } ++ ++ return pcd; ++#ifdef DWC_UTE_CFI ++fail: ++#endif ++ if (pcd->setup_pkt) ++ DWC_FREE(pcd->setup_pkt); ++ if (pcd->status_buf) ++ DWC_FREE(pcd->status_buf); ++#ifdef DWC_UTE_CFI ++ if (pcd->cfi) ++ DWC_FREE(pcd->cfi); ++#endif ++ if (pcd) ++ DWC_FREE(pcd); ++ return NULL; ++ ++} ++ ++/** ++ * Remove PCD specific data ++ */ ++void dwc_otg_pcd_remove(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; ++ int i; ++ if (pcd->core_if->core_params->dev_out_nak) { ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[i]); ++ pcd->core_if->ep_xfer_info[i].state = 0; ++ } ++ } ++ ++ if (GET_CORE_IF(pcd)->dma_enable) { ++ DWC_DMA_FREE(sizeof(*pcd->setup_pkt) * 5, pcd->setup_pkt, ++ pcd->setup_pkt_dma_handle); ++ DWC_DMA_FREE(sizeof(uint16_t), pcd->status_buf, ++ pcd->status_buf_dma_handle); ++ if (GET_CORE_IF(pcd)->dma_desc_enable) { ++ dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0], ++ dev_if->dma_setup_desc_addr ++ [0], 1); ++ dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1], ++ dev_if->dma_setup_desc_addr ++ [1], 1); ++ dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr, ++ dev_if->dma_in_desc_addr, 1); ++ dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr, ++ dev_if->dma_out_desc_addr, ++ 1); ++ } ++ } else { ++ DWC_FREE(pcd->setup_pkt); ++ DWC_FREE(pcd->status_buf); ++ } ++ DWC_SPINLOCK_FREE(pcd->lock); ++ /* Set core_if's lock pointer to NULL */ ++ pcd->core_if->lock = NULL; ++ ++ DWC_TASK_FREE(pcd->start_xfer_tasklet); ++ DWC_TASK_FREE(pcd->test_mode_tasklet); ++ if (pcd->core_if->core_params->dev_out_nak) { ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ if (pcd->core_if->ep_xfer_timer[i]) { ++ DWC_TIMER_FREE(pcd->core_if->ep_xfer_timer[i]); ++ } ++ } ++ } ++ ++/* Release the CFI object's dynamic memory */ ++#ifdef DWC_UTE_CFI ++ if (pcd->cfi->ops.release) { ++ pcd->cfi->ops.release(pcd->cfi); ++ } ++#endif ++ ++ DWC_FREE(pcd); ++} ++ ++/** ++ * Returns whether registered pcd is dual speed or not ++ */ ++uint32_t dwc_otg_pcd_is_dualspeed(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ ++ if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) || ++ ((core_if->hwcfg2.b.hs_phy_type == 2) && ++ (core_if->hwcfg2.b.fs_phy_type == 1) && ++ (core_if->core_params->ulpi_fs_ls))) { ++ return 0; ++ } ++ ++ return 1; ++} ++ ++/** ++ * Returns whether registered pcd is OTG capable or not ++ */ ++uint32_t dwc_otg_pcd_is_otg(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ gusbcfg_data_t usbcfg = {.d32 = 0 }; ++ ++ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ if (!usbcfg.b.srpcap || !usbcfg.b.hnpcap) { ++ return 0; ++ } ++ ++ return 1; ++} ++ ++/** ++ * This function assigns periodic Tx FIFO to an periodic EP ++ * in shared Tx FIFO mode ++ */ ++static uint32_t assign_tx_fifo(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t TxMsk = 1; ++ int i; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; ++i) { ++ if ((TxMsk & core_if->tx_msk) == 0) { ++ core_if->tx_msk |= TxMsk; ++ return i + 1; ++ } ++ TxMsk <<= 1; ++ } ++ return 0; ++} ++ ++/** ++ * This function assigns periodic Tx FIFO to an periodic EP ++ * in shared Tx FIFO mode ++ */ ++static uint32_t assign_perio_tx_fifo(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t PerTxMsk = 1; ++ int i; ++ for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; ++i) { ++ if ((PerTxMsk & core_if->p_tx_msk) == 0) { ++ core_if->p_tx_msk |= PerTxMsk; ++ return i + 1; ++ } ++ PerTxMsk <<= 1; ++ } ++ return 0; ++} ++ ++/** ++ * This function releases periodic Tx FIFO ++ * in shared Tx FIFO mode ++ */ ++static void release_perio_tx_fifo(dwc_otg_core_if_t * core_if, ++ uint32_t fifo_num) ++{ ++ core_if->p_tx_msk = ++ (core_if->p_tx_msk & (1 << (fifo_num - 1))) ^ core_if->p_tx_msk; ++} ++ ++/** ++ * This function releases periodic Tx FIFO ++ * in shared Tx FIFO mode ++ */ ++static void release_tx_fifo(dwc_otg_core_if_t * core_if, uint32_t fifo_num) ++{ ++ core_if->tx_msk = ++ (core_if->tx_msk & (1 << (fifo_num - 1))) ^ core_if->tx_msk; ++} ++ ++/** ++ * This function is being called from gadget ++ * to enable PCD endpoint. ++ */ ++int dwc_otg_pcd_ep_enable(dwc_otg_pcd_t * pcd, ++ const uint8_t * ep_desc, void *usb_ep) ++{ ++ int num, dir; ++ dwc_otg_pcd_ep_t *ep = NULL; ++ const usb_endpoint_descriptor_t *desc; ++ dwc_irqflags_t flags; ++ fifosize_data_t dptxfsiz = {.d32 = 0 }; ++ gdfifocfg_data_t gdfifocfg = {.d32 = 0 }; ++ gdfifocfg_data_t gdfifocfgbase = {.d32 = 0 }; ++ int retval = 0; ++ int i, epcount; ++ ++ desc = (const usb_endpoint_descriptor_t *)ep_desc; ++ ++ if (!desc) { ++ pcd->ep0.priv = usb_ep; ++ ep = &pcd->ep0; ++ retval = -DWC_E_INVALID; ++ goto out; ++ } ++ ++ num = UE_GET_ADDR(desc->bEndpointAddress); ++ dir = UE_GET_DIR(desc->bEndpointAddress); ++ ++ if (!desc->wMaxPacketSize) { ++ DWC_WARN("bad maxpacketsize\n"); ++ retval = -DWC_E_INVALID; ++ goto out; ++ } ++ ++ if (dir == UE_DIR_IN) { ++ epcount = pcd->core_if->dev_if->num_in_eps; ++ for (i = 0; i < epcount; i++) { ++ if (num == pcd->in_ep[i].dwc_ep.num) { ++ ep = &pcd->in_ep[i]; ++ break; ++ } ++ } ++ } else { ++ epcount = pcd->core_if->dev_if->num_out_eps; ++ for (i = 0; i < epcount; i++) { ++ if (num == pcd->out_ep[i].dwc_ep.num) { ++ ep = &pcd->out_ep[i]; ++ break; ++ } ++ } ++ } ++ ++ if (!ep) { ++ DWC_WARN("bad address\n"); ++ retval = -DWC_E_INVALID; ++ goto out; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ ++ ep->desc = desc; ++ ep->priv = usb_ep; ++ ++ /* ++ * Activate the EP ++ */ ++ ep->stopped = 0; ++ ++ ep->dwc_ep.is_in = (dir == UE_DIR_IN); ++ ep->dwc_ep.maxpacket = UGETW(desc->wMaxPacketSize); ++ ++ ep->dwc_ep.type = desc->bmAttributes & UE_XFERTYPE; ++ ++ if (ep->dwc_ep.is_in) { ++ if (!GET_CORE_IF(pcd)->en_multiple_tx_fifo) { ++ ep->dwc_ep.tx_fifo_num = 0; ++ ++ if (ep->dwc_ep.type == UE_ISOCHRONOUS) { ++ /* ++ * if ISOC EP then assign a Periodic Tx FIFO. ++ */ ++ ep->dwc_ep.tx_fifo_num = ++ assign_perio_tx_fifo(GET_CORE_IF(pcd)); ++ } ++ } else { ++ /* ++ * if Dedicated FIFOs mode is on then assign a Tx FIFO. ++ */ ++ ep->dwc_ep.tx_fifo_num = ++ assign_tx_fifo(GET_CORE_IF(pcd)); ++ } ++ ++ /* Calculating EP info controller base address */ ++ if (ep->dwc_ep.tx_fifo_num ++ && GET_CORE_IF(pcd)->en_multiple_tx_fifo) { ++ gdfifocfg.d32 = ++ DWC_READ_REG32(&GET_CORE_IF(pcd)-> ++ core_global_regs->gdfifocfg); ++ gdfifocfgbase.d32 = gdfifocfg.d32 >> 16; ++ dptxfsiz.d32 = ++ (DWC_READ_REG32 ++ (&GET_CORE_IF(pcd)->core_global_regs-> ++ dtxfsiz[ep->dwc_ep.tx_fifo_num - 1]) >> 16); ++ gdfifocfg.b.epinfobase = ++ gdfifocfgbase.d32 + dptxfsiz.d32; ++ if (GET_CORE_IF(pcd)->snpsid <= OTG_CORE_REV_2_94a) { ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)-> ++ core_global_regs->gdfifocfg, ++ gdfifocfg.d32); ++ } ++ } ++ } ++ /* Set initial data PID. */ ++ if (ep->dwc_ep.type == UE_BULK) { ++ ep->dwc_ep.data_pid_start = 0; ++ } ++ ++ /* Alloc DMA Descriptors */ ++ if (GET_CORE_IF(pcd)->dma_desc_enable) { ++#ifndef DWC_UTE_PER_IO ++ if (ep->dwc_ep.type != UE_ISOCHRONOUS) { ++#endif ++ ep->dwc_ep.desc_addr = ++ dwc_otg_ep_alloc_desc_chain(&ep-> ++ dwc_ep.dma_desc_addr, ++ MAX_DMA_DESC_CNT); ++ if (!ep->dwc_ep.desc_addr) { ++ DWC_WARN("%s, can't allocate DMA descriptor\n", ++ __func__); ++ retval = -DWC_E_SHUTDOWN; ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ goto out; ++ } ++#ifndef DWC_UTE_PER_IO ++ } ++#endif ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "Activate %s: type=%d, mps=%d desc=%p\n", ++ (ep->dwc_ep.is_in ? "IN" : "OUT"), ++ ep->dwc_ep.type, ep->dwc_ep.maxpacket, ep->desc); ++#ifdef DWC_UTE_PER_IO ++ ep->dwc_ep.xiso_bInterval = 1 << (ep->desc->bInterval - 1); ++#endif ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { ++ ep->dwc_ep.bInterval = 1 << (ep->desc->bInterval - 1); ++ ep->dwc_ep.frame_num = 0xFFFFFFFF; ++ } ++ ++ dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep); ++ ++#ifdef DWC_UTE_CFI ++ if (pcd->cfi->ops.ep_enable) { ++ pcd->cfi->ops.ep_enable(pcd->cfi, pcd, ep); ++ } ++#endif ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++out: ++ return retval; ++} ++ ++/** ++ * This function is being called from gadget ++ * to disable PCD endpoint. ++ */ ++int dwc_otg_pcd_ep_disable(dwc_otg_pcd_t * pcd, void *ep_handle) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ dwc_irqflags_t flags; ++ dwc_otg_dev_dma_desc_t *desc_addr; ++ dwc_dma_t dma_desc_addr; ++ gdfifocfg_data_t gdfifocfgbase = {.d32 = 0 }; ++ gdfifocfg_data_t gdfifocfg = {.d32 = 0 }; ++ fifosize_data_t dptxfsiz = {.d32 = 0 }; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ ++ if (!ep || !ep->desc) { ++ DWC_DEBUGPL(DBG_PCD, "bad ep address\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ ++ dwc_otg_request_nuke(ep); ++ ++ dwc_otg_ep_deactivate(GET_CORE_IF(pcd), &ep->dwc_ep); ++ if (pcd->core_if->core_params->dev_out_nak) { ++ DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[ep->dwc_ep.num]); ++ pcd->core_if->ep_xfer_info[ep->dwc_ep.num].state = 0; ++ } ++ ep->desc = NULL; ++ ep->stopped = 1; ++ ++ gdfifocfg.d32 = ++ DWC_READ_REG32(&GET_CORE_IF(pcd)->core_global_regs->gdfifocfg); ++ gdfifocfgbase.d32 = gdfifocfg.d32 >> 16; ++ ++ if (ep->dwc_ep.is_in) { ++ if (GET_CORE_IF(pcd)->en_multiple_tx_fifo) { ++ /* Flush the Tx FIFO */ ++ dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), ++ ep->dwc_ep.tx_fifo_num); ++ } ++ release_perio_tx_fifo(GET_CORE_IF(pcd), ep->dwc_ep.tx_fifo_num); ++ release_tx_fifo(GET_CORE_IF(pcd), ep->dwc_ep.tx_fifo_num); ++ if (GET_CORE_IF(pcd)->en_multiple_tx_fifo) { ++ /* Decreasing EPinfo Base Addr */ ++ dptxfsiz.d32 = ++ (DWC_READ_REG32 ++ (&GET_CORE_IF(pcd)-> ++ core_global_regs->dtxfsiz[ep->dwc_ep.tx_fifo_num-1]) >> 16); ++ gdfifocfg.b.epinfobase = gdfifocfgbase.d32 - dptxfsiz.d32; ++ if (GET_CORE_IF(pcd)->snpsid <= OTG_CORE_REV_2_94a) { ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gdfifocfg, ++ gdfifocfg.d32); ++ } ++ } ++ } ++ ++ /* Free DMA Descriptors */ ++ if (GET_CORE_IF(pcd)->dma_desc_enable) { ++ if (ep->dwc_ep.type != UE_ISOCHRONOUS) { ++ desc_addr = ep->dwc_ep.desc_addr; ++ dma_desc_addr = ep->dwc_ep.dma_desc_addr; ++ ++ /* Cannot call dma_free_coherent() with IRQs disabled */ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ dwc_otg_ep_free_desc_chain(desc_addr, dma_desc_addr, ++ MAX_DMA_DESC_CNT); ++ ++ goto out_unlocked; ++ } ++ } ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++out_unlocked: ++ DWC_DEBUGPL(DBG_PCD, "%d %s disabled\n", ep->dwc_ep.num, ++ ep->dwc_ep.is_in ? "IN" : "OUT"); ++ return 0; ++ ++} ++ ++/******************************************************************************/ ++#ifdef DWC_UTE_PER_IO ++ ++/** ++ * Free the request and its extended parts ++ * ++ */ ++void dwc_pcd_xiso_ereq_free(dwc_otg_pcd_ep_t * ep, dwc_otg_pcd_request_t * req) ++{ ++ DWC_FREE(req->ext_req.per_io_frame_descs); ++ DWC_FREE(req); ++} ++ ++/** ++ * Start the next request in the endpoint's queue. ++ * ++ */ ++int dwc_otg_pcd_xiso_start_next_request(dwc_otg_pcd_t * pcd, ++ dwc_otg_pcd_ep_t * ep) ++{ ++ int i; ++ dwc_otg_pcd_request_t *req = NULL; ++ dwc_ep_t *dwcep = NULL; ++ struct dwc_iso_xreq_port *ereq = NULL; ++ struct dwc_iso_pkt_desc_port *ddesc_iso; ++ uint16_t nat; ++ depctl_data_t diepctl; ++ ++ dwcep = &ep->dwc_ep; ++ ++ if (dwcep->xiso_active_xfers > 0) { ++#if 0 //Disable this to decrease s/w overhead that is crucial for Isoc transfers ++ DWC_WARN("There are currently active transfers for EP%d \ ++ (active=%d; queued=%d)", dwcep->num, dwcep->xiso_active_xfers, ++ dwcep->xiso_queued_xfers); ++#endif ++ return 0; ++ } ++ ++ nat = UGETW(ep->desc->wMaxPacketSize); ++ nat = (nat >> 11) & 0x03; ++ ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ ereq = &req->ext_req; ++ ep->stopped = 0; ++ ++ /* Get the frame number */ ++ dwcep->xiso_frame_num = ++ dwc_otg_get_frame_number(GET_CORE_IF(pcd)); ++ DWC_DEBUG("FRM_NUM=%d", dwcep->xiso_frame_num); ++ ++ ddesc_iso = ereq->per_io_frame_descs; ++ ++ if (dwcep->is_in) { ++ /* Setup DMA Descriptor chain for IN Isoc request */ ++ for (i = 0; i < ereq->pio_pkt_count; i++) { ++ //if ((i % (nat + 1)) == 0) ++ if ( i > 0 ) ++ dwcep->xiso_frame_num = ++ (dwcep->xiso_bInterval + ++ dwcep->xiso_frame_num) & 0x3FFF; ++ dwcep->desc_addr[i].buf = ++ req->dma + ddesc_iso[i].offset; ++ dwcep->desc_addr[i].status.b_iso_in.txbytes = ++ ddesc_iso[i].length; ++ dwcep->desc_addr[i].status.b_iso_in.framenum = ++ dwcep->xiso_frame_num; ++ dwcep->desc_addr[i].status.b_iso_in.bs = ++ BS_HOST_READY; ++ dwcep->desc_addr[i].status.b_iso_in.txsts = 0; ++ dwcep->desc_addr[i].status.b_iso_in.sp = ++ (ddesc_iso[i].length % ++ dwcep->maxpacket) ? 1 : 0; ++ dwcep->desc_addr[i].status.b_iso_in.ioc = 0; ++ dwcep->desc_addr[i].status.b_iso_in.pid = nat + 1; ++ dwcep->desc_addr[i].status.b_iso_in.l = 0; ++ ++ /* Process the last descriptor */ ++ if (i == ereq->pio_pkt_count - 1) { ++ dwcep->desc_addr[i].status.b_iso_in.ioc = 1; ++ dwcep->desc_addr[i].status.b_iso_in.l = 1; ++ } ++ } ++ ++ /* Setup and start the transfer for this endpoint */ ++ dwcep->xiso_active_xfers++; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->dev_if-> ++ in_ep_regs[dwcep->num]->diepdma, ++ dwcep->dma_desc_addr); ++ diepctl.d32 = 0; ++ diepctl.b.epena = 1; ++ diepctl.b.cnak = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->dev_if-> ++ in_ep_regs[dwcep->num]->diepctl, 0, ++ diepctl.d32); ++ } else { ++ /* Setup DMA Descriptor chain for OUT Isoc request */ ++ for (i = 0; i < ereq->pio_pkt_count; i++) { ++ //if ((i % (nat + 1)) == 0) ++ dwcep->xiso_frame_num = (dwcep->xiso_bInterval + ++ dwcep->xiso_frame_num) & 0x3FFF; ++ dwcep->desc_addr[i].buf = ++ req->dma + ddesc_iso[i].offset; ++ dwcep->desc_addr[i].status.b_iso_out.rxbytes = ++ ddesc_iso[i].length; ++ dwcep->desc_addr[i].status.b_iso_out.framenum = ++ dwcep->xiso_frame_num; ++ dwcep->desc_addr[i].status.b_iso_out.bs = ++ BS_HOST_READY; ++ dwcep->desc_addr[i].status.b_iso_out.rxsts = 0; ++ dwcep->desc_addr[i].status.b_iso_out.sp = ++ (ddesc_iso[i].length % ++ dwcep->maxpacket) ? 1 : 0; ++ dwcep->desc_addr[i].status.b_iso_out.ioc = 0; ++ dwcep->desc_addr[i].status.b_iso_out.pid = nat + 1; ++ dwcep->desc_addr[i].status.b_iso_out.l = 0; ++ ++ /* Process the last descriptor */ ++ if (i == ereq->pio_pkt_count - 1) { ++ dwcep->desc_addr[i].status.b_iso_out.ioc = 1; ++ dwcep->desc_addr[i].status.b_iso_out.l = 1; ++ } ++ } ++ ++ /* Setup and start the transfer for this endpoint */ ++ dwcep->xiso_active_xfers++; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)-> ++ dev_if->out_ep_regs[dwcep->num]-> ++ doepdma, dwcep->dma_desc_addr); ++ diepctl.d32 = 0; ++ diepctl.b.epena = 1; ++ diepctl.b.cnak = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)-> ++ dev_if->out_ep_regs[dwcep->num]-> ++ doepctl, 0, diepctl.d32); ++ } ++ ++ } else { ++ ep->stopped = 1; ++ } ++ ++ return 0; ++} ++ ++/** ++ * - Remove the request from the queue ++ */ ++void complete_xiso_ep(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_otg_pcd_request_t *req = NULL; ++ struct dwc_iso_xreq_port *ereq = NULL; ++ struct dwc_iso_pkt_desc_port *ddesc_iso = NULL; ++ dwc_ep_t *dwcep = NULL; ++ int i; ++ ++ //DWC_DEBUG(); ++ dwcep = &ep->dwc_ep; ++ ++ /* Get the first pending request from the queue */ ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ if (!req) { ++ DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep); ++ return; ++ } ++ dwcep->xiso_active_xfers--; ++ dwcep->xiso_queued_xfers--; ++ /* Remove this request from the queue */ ++ DWC_CIRCLEQ_REMOVE_INIT(&ep->queue, req, queue_entry); ++ } else { ++ DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep); ++ return; ++ } ++ ++ ep->stopped = 1; ++ ereq = &req->ext_req; ++ ddesc_iso = ereq->per_io_frame_descs; ++ ++ if (dwcep->xiso_active_xfers < 0) { ++ DWC_WARN("EP#%d (xiso_active_xfers=%d)", dwcep->num, ++ dwcep->xiso_active_xfers); ++ } ++ ++ /* Fill the Isoc descs of portable extended req from dma descriptors */ ++ for (i = 0; i < ereq->pio_pkt_count; i++) { ++ if (dwcep->is_in) { /* IN endpoints */ ++ ddesc_iso[i].actual_length = ddesc_iso[i].length - ++ dwcep->desc_addr[i].status.b_iso_in.txbytes; ++ ddesc_iso[i].status = ++ dwcep->desc_addr[i].status.b_iso_in.txsts; ++ } else { /* OUT endpoints */ ++ ddesc_iso[i].actual_length = ddesc_iso[i].length - ++ dwcep->desc_addr[i].status.b_iso_out.rxbytes; ++ ddesc_iso[i].status = ++ dwcep->desc_addr[i].status.b_iso_out.rxsts; ++ } ++ } ++ ++ DWC_SPINUNLOCK(ep->pcd->lock); ++ ++ /* Call the completion function in the non-portable logic */ ++ ep->pcd->fops->xisoc_complete(ep->pcd, ep->priv, req->priv, 0, ++ &req->ext_req); ++ ++ DWC_SPINLOCK(ep->pcd->lock); ++ ++ /* Free the request - specific freeing needed for extended request object */ ++ dwc_pcd_xiso_ereq_free(ep, req); ++ ++ /* Start the next request */ ++ dwc_otg_pcd_xiso_start_next_request(ep->pcd, ep); ++ ++ return; ++} ++ ++/** ++ * Create and initialize the Isoc pkt descriptors of the extended request. ++ * ++ */ ++static int dwc_otg_pcd_xiso_create_pkt_descs(dwc_otg_pcd_request_t * req, ++ void *ereq_nonport, ++ int atomic_alloc) ++{ ++ struct dwc_iso_xreq_port *ereq = NULL; ++ struct dwc_iso_xreq_port *req_mapped = NULL; ++ struct dwc_iso_pkt_desc_port *ipds = NULL; /* To be created in this function */ ++ uint32_t pkt_count; ++ int i; ++ ++ ereq = &req->ext_req; ++ req_mapped = (struct dwc_iso_xreq_port *)ereq_nonport; ++ pkt_count = req_mapped->pio_pkt_count; ++ ++ /* Create the isoc descs */ ++ if (atomic_alloc) { ++ ipds = DWC_ALLOC_ATOMIC(sizeof(*ipds) * pkt_count); ++ } else { ++ ipds = DWC_ALLOC(sizeof(*ipds) * pkt_count); ++ } ++ ++ if (!ipds) { ++ DWC_ERROR("Failed to allocate isoc descriptors"); ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ /* Initialize the extended request fields */ ++ ereq->per_io_frame_descs = ipds; ++ ereq->error_count = 0; ++ ereq->pio_alloc_pkt_count = pkt_count; ++ ereq->pio_pkt_count = pkt_count; ++ ereq->tr_sub_flags = req_mapped->tr_sub_flags; ++ ++ /* Init the Isoc descriptors */ ++ for (i = 0; i < pkt_count; i++) { ++ ipds[i].length = req_mapped->per_io_frame_descs[i].length; ++ ipds[i].offset = req_mapped->per_io_frame_descs[i].offset; ++ ipds[i].status = req_mapped->per_io_frame_descs[i].status; /* 0 */ ++ ipds[i].actual_length = ++ req_mapped->per_io_frame_descs[i].actual_length; ++ } ++ ++ return 0; ++} ++ ++static void prn_ext_request(struct dwc_iso_xreq_port *ereq) ++{ ++ struct dwc_iso_pkt_desc_port *xfd = NULL; ++ int i; ++ ++ DWC_DEBUG("per_io_frame_descs=%p", ereq->per_io_frame_descs); ++ DWC_DEBUG("tr_sub_flags=%d", ereq->tr_sub_flags); ++ DWC_DEBUG("error_count=%d", ereq->error_count); ++ DWC_DEBUG("pio_alloc_pkt_count=%d", ereq->pio_alloc_pkt_count); ++ DWC_DEBUG("pio_pkt_count=%d", ereq->pio_pkt_count); ++ DWC_DEBUG("res=%d", ereq->res); ++ ++ for (i = 0; i < ereq->pio_pkt_count; i++) { ++ xfd = &ereq->per_io_frame_descs[0]; ++ DWC_DEBUG("FD #%d", i); ++ ++ DWC_DEBUG("xfd->actual_length=%d", xfd->actual_length); ++ DWC_DEBUG("xfd->length=%d", xfd->length); ++ DWC_DEBUG("xfd->offset=%d", xfd->offset); ++ DWC_DEBUG("xfd->status=%d", xfd->status); ++ } ++} ++ ++/** ++ * ++ */ ++int dwc_otg_pcd_xiso_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle, ++ uint8_t * buf, dwc_dma_t dma_buf, uint32_t buflen, ++ int zero, void *req_handle, int atomic_alloc, ++ void *ereq_nonport) ++{ ++ dwc_otg_pcd_request_t *req = NULL; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_irqflags_t flags; ++ int res; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ if (!ep) { ++ DWC_WARN("bad ep\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ /* We support this extension only for DDMA mode */ ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) ++ if (!GET_CORE_IF(pcd)->dma_desc_enable) ++ return -DWC_E_INVALID; ++ ++ /* Create a dwc_otg_pcd_request_t object */ ++ if (atomic_alloc) { ++ req = DWC_ALLOC_ATOMIC(sizeof(*req)); ++ } else { ++ req = DWC_ALLOC(sizeof(*req)); ++ } ++ ++ if (!req) { ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ /* Create the Isoc descs for this request which shall be the exact match ++ * of the structure sent to us from the non-portable logic */ ++ res = ++ dwc_otg_pcd_xiso_create_pkt_descs(req, ereq_nonport, atomic_alloc); ++ if (res) { ++ DWC_WARN("Failed to init the Isoc descriptors"); ++ DWC_FREE(req); ++ return res; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ ++ DWC_CIRCLEQ_INIT_ENTRY(req, queue_entry); ++ req->buf = buf; ++ req->dma = dma_buf; ++ req->length = buflen; ++ req->sent_zlp = zero; ++ req->priv = req_handle; ++ ++ //DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ ep->dwc_ep.dma_addr = dma_buf; ++ ep->dwc_ep.start_xfer_buff = buf; ++ ep->dwc_ep.xfer_buff = buf; ++ ep->dwc_ep.xfer_len = 0; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = buflen; ++ ++ /* Add this request to the tail */ ++ DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry); ++ ep->dwc_ep.xiso_queued_xfers++; ++ ++//DWC_DEBUG("CP_0"); ++//DWC_DEBUG("req->ext_req.tr_sub_flags=%d", req->ext_req.tr_sub_flags); ++//prn_ext_request((struct dwc_iso_xreq_port *) ereq_nonport); ++//prn_ext_request(&req->ext_req); ++ ++ //DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ /* If the req->status == ASAP then check if there is any active transfer ++ * for this endpoint. If no active transfers, then get the first entry ++ * from the queue and start that transfer ++ */ ++ if (req->ext_req.tr_sub_flags == DWC_EREQ_TF_ASAP) { ++ res = dwc_otg_pcd_xiso_start_next_request(pcd, ep); ++ if (res) { ++ DWC_WARN("Failed to start the next Isoc transfer"); ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ DWC_FREE(req); ++ return res; ++ } ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ return 0; ++} ++ ++#endif ++/* END ifdef DWC_UTE_PER_IO ***************************************************/ ++int dwc_otg_pcd_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle, ++ uint8_t * buf, dwc_dma_t dma_buf, uint32_t buflen, ++ int zero, void *req_handle, int atomic_alloc) ++{ ++ dwc_irqflags_t flags; ++ dwc_otg_pcd_request_t *req; ++ dwc_otg_pcd_ep_t *ep; ++ uint32_t max_transfer; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ if (!ep || (!ep->desc && ep->dwc_ep.num != 0)) { ++ DWC_WARN("bad ep\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (atomic_alloc) { ++ req = DWC_ALLOC_ATOMIC(sizeof(*req)); ++ } else { ++ req = DWC_ALLOC(sizeof(*req)); ++ } ++ ++ if (!req) { ++ return -DWC_E_NO_MEMORY; ++ } ++ DWC_CIRCLEQ_INIT_ENTRY(req, queue_entry); ++ if (!GET_CORE_IF(pcd)->core_params->opt) { ++ if (ep->dwc_ep.num != 0) { ++ DWC_ERROR("queue req %p, len %d buf %p\n", ++ req_handle, buflen, buf); ++ } ++ } ++ ++ req->buf = buf; ++ req->dma = dma_buf; ++ req->length = buflen; ++ req->sent_zlp = zero; ++ req->priv = req_handle; ++ req->dw_align_buf = NULL; ++ if ((dma_buf & 0x3) && GET_CORE_IF(pcd)->dma_enable ++ && !GET_CORE_IF(pcd)->dma_desc_enable) ++ req->dw_align_buf = DWC_DMA_ALLOC(buflen, ++ &req->dw_align_buf_dma); ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ ++ /* ++ * After adding request to the queue for IN ISOC wait for In Token Received ++ * when TX FIFO is empty interrupt and for OUT ISOC wait for OUT Token ++ * Received when EP is disabled interrupt to obtain starting microframe ++ * (odd/even) start transfer ++ */ ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { ++ if (req != 0) { ++ depctl_data_t depctl = {.d32 = ++ DWC_READ_REG32(&pcd->core_if->dev_if-> ++ in_ep_regs[ep->dwc_ep.num]-> ++ diepctl) }; ++ ++pcd->request_pending; ++ ++ DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry); ++ if (ep->dwc_ep.is_in) { ++ depctl.b.cnak = 1; ++ DWC_WRITE_REG32(&pcd->core_if->dev_if-> ++ in_ep_regs[ep->dwc_ep.num]-> ++ diepctl, depctl.d32); ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ } ++ return 0; ++ } ++ ++ /* ++ * For EP0 IN without premature status, zlp is required? ++ */ ++ if (ep->dwc_ep.num == 0 && ep->dwc_ep.is_in) { ++ DWC_DEBUGPL(DBG_PCDV, "%d-OUT ZLP\n", ep->dwc_ep.num); ++ //_req->zero = 1; ++ } ++ ++ /* Start the transfer */ ++ if (DWC_CIRCLEQ_EMPTY(&ep->queue) && !ep->stopped) { ++ /* EP0 Transfer? */ ++ if (ep->dwc_ep.num == 0) { ++ switch (pcd->ep0state) { ++ case EP0_IN_DATA_PHASE: ++ DWC_DEBUGPL(DBG_PCD, ++ "%s ep0: EP0_IN_DATA_PHASE\n", ++ __func__); ++ break; ++ ++ case EP0_OUT_DATA_PHASE: ++ DWC_DEBUGPL(DBG_PCD, ++ "%s ep0: EP0_OUT_DATA_PHASE\n", ++ __func__); ++ if (pcd->request_config) { ++ /* Complete STATUS PHASE */ ++ ep->dwc_ep.is_in = 1; ++ pcd->ep0state = EP0_IN_STATUS_PHASE; ++ } ++ break; ++ ++ case EP0_IN_STATUS_PHASE: ++ DWC_DEBUGPL(DBG_PCD, ++ "%s ep0: EP0_IN_STATUS_PHASE\n", ++ __func__); ++ break; ++ ++ default: ++ DWC_DEBUGPL(DBG_ANY, "ep0: odd state %d\n", ++ pcd->ep0state); ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ return -DWC_E_SHUTDOWN; ++ } ++ ++ ep->dwc_ep.dma_addr = dma_buf; ++ ep->dwc_ep.start_xfer_buff = buf; ++ ep->dwc_ep.xfer_buff = buf; ++ ep->dwc_ep.xfer_len = buflen; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ if (zero) { ++ if ((ep->dwc_ep.xfer_len % ++ ep->dwc_ep.maxpacket == 0) ++ && (ep->dwc_ep.xfer_len != 0)) { ++ ep->dwc_ep.sent_zlp = 1; ++ } ++ ++ } ++ ++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), ++ &ep->dwc_ep); ++ } // non-ep0 endpoints ++ else { ++#ifdef DWC_UTE_CFI ++ if (ep->dwc_ep.buff_mode != BM_STANDARD) { ++ /* store the request length */ ++ ep->dwc_ep.cfi_req_len = buflen; ++ pcd->cfi->ops.build_descriptors(pcd->cfi, pcd, ++ ep, req); ++ } else { ++#endif ++ max_transfer = ++ GET_CORE_IF(ep->pcd)->core_params-> ++ max_transfer_size; ++ ++ /* Setup and start the Transfer */ ++ if (req->dw_align_buf){ ++ if (ep->dwc_ep.is_in) ++ dwc_memcpy(req->dw_align_buf, ++ buf, buflen); ++ ep->dwc_ep.dma_addr = ++ req->dw_align_buf_dma; ++ ep->dwc_ep.start_xfer_buff = ++ req->dw_align_buf; ++ ep->dwc_ep.xfer_buff = ++ req->dw_align_buf; ++ } else { ++ ep->dwc_ep.dma_addr = dma_buf; ++ ep->dwc_ep.start_xfer_buff = buf; ++ ep->dwc_ep.xfer_buff = buf; ++ } ++ ep->dwc_ep.xfer_len = 0; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = buflen; ++ ++ ep->dwc_ep.maxxfer = max_transfer; ++ if (GET_CORE_IF(pcd)->dma_desc_enable) { ++ uint32_t out_max_xfer = ++ DDMA_MAX_TRANSFER_SIZE - ++ (DDMA_MAX_TRANSFER_SIZE % 4); ++ if (ep->dwc_ep.is_in) { ++ if (ep->dwc_ep.maxxfer > ++ DDMA_MAX_TRANSFER_SIZE) { ++ ep->dwc_ep.maxxfer = ++ DDMA_MAX_TRANSFER_SIZE; ++ } ++ } else { ++ if (ep->dwc_ep.maxxfer > ++ out_max_xfer) { ++ ep->dwc_ep.maxxfer = ++ out_max_xfer; ++ } ++ } ++ } ++ if (ep->dwc_ep.maxxfer < ep->dwc_ep.total_len) { ++ ep->dwc_ep.maxxfer -= ++ (ep->dwc_ep.maxxfer % ++ ep->dwc_ep.maxpacket); ++ } ++ ++ if (zero) { ++ if ((ep->dwc_ep.total_len % ++ ep->dwc_ep.maxpacket == 0) ++ && (ep->dwc_ep.total_len != 0)) { ++ ep->dwc_ep.sent_zlp = 1; ++ } ++ } ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ dwc_otg_ep_start_transfer(GET_CORE_IF(pcd), ++ &ep->dwc_ep); ++ } ++ } ++ ++ if (req != 0) { ++ ++pcd->request_pending; ++ DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry); ++ if (ep->dwc_ep.is_in && ep->stopped ++ && !(GET_CORE_IF(pcd)->dma_enable)) { ++ /** @todo NGS Create a function for this. */ ++ diepmsk_data_t diepmsk = {.d32 = 0 }; ++ diepmsk.b.intktxfemp = 1; ++ if (GET_CORE_IF(pcd)->multiproc_int_enable) { ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)-> ++ dev_if->dev_global_regs->diepeachintmsk ++ [ep->dwc_ep.num], 0, ++ diepmsk.d32); ++ } else { ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)-> ++ dev_if->dev_global_regs-> ++ diepmsk, 0, diepmsk.d32); ++ } ++ ++ } ++ } ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ return 0; ++} ++ ++int dwc_otg_pcd_ep_dequeue(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle) ++{ ++ dwc_irqflags_t flags; ++ dwc_otg_pcd_request_t *req; ++ dwc_otg_pcd_ep_t *ep; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ if (!ep || (!ep->desc && ep->dwc_ep.num != 0)) { ++ DWC_WARN("bad argument\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ ++ /* make sure it's actually queued on this endpoint */ ++ DWC_CIRCLEQ_FOREACH(req, &ep->queue, queue_entry) { ++ if (req->priv == (void *)req_handle) { ++ break; ++ } ++ } ++ ++ if (req->priv != (void *)req_handle) { ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ return -DWC_E_INVALID; ++ } ++ ++ if (!DWC_CIRCLEQ_EMPTY_ENTRY(req, queue_entry)) { ++ dwc_otg_request_done(ep, req, -DWC_E_RESTART); ++ } else { ++ req = NULL; ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ return req ? 0 : -DWC_E_SHUTDOWN; ++ ++} ++ ++/** ++ * dwc_otg_pcd_ep_wedge - sets the halt feature and ignores clear requests ++ * ++ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT) ++ * requests. If the gadget driver clears the halt status, it will ++ * automatically unwedge the endpoint. ++ * ++ * Returns zero on success, else negative DWC error code. ++ */ ++int dwc_otg_pcd_ep_wedge(dwc_otg_pcd_t * pcd, void *ep_handle) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ dwc_irqflags_t flags; ++ int retval = 0; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ ++ if ((!ep->desc && ep != &pcd->ep0) || ++ (ep->desc && (ep->desc->bmAttributes == UE_ISOCHRONOUS))) { ++ DWC_WARN("%s, bad ep\n", __func__); ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ DWC_WARN("%d %s XFer In process\n", ep->dwc_ep.num, ++ ep->dwc_ep.is_in ? "IN" : "OUT"); ++ retval = -DWC_E_AGAIN; ++ } else { ++ /* This code needs to be reviewed */ ++ if (ep->dwc_ep.is_in == 1 && GET_CORE_IF(pcd)->dma_desc_enable) { ++ dtxfsts_data_t txstatus; ++ fifosize_data_t txfifosize; ++ ++ txfifosize.d32 = ++ DWC_READ_REG32(&GET_CORE_IF(pcd)-> ++ core_global_regs->dtxfsiz[ep->dwc_ep. ++ tx_fifo_num]); ++ txstatus.d32 = ++ DWC_READ_REG32(&GET_CORE_IF(pcd)-> ++ dev_if->in_ep_regs[ep->dwc_ep.num]-> ++ dtxfsts); ++ ++ if (txstatus.b.txfspcavail < txfifosize.b.depth) { ++ DWC_WARN("%s() Data In Tx Fifo\n", __func__); ++ retval = -DWC_E_AGAIN; ++ } else { ++ if (ep->dwc_ep.num == 0) { ++ pcd->ep0state = EP0_STALL; ++ } ++ ++ ep->stopped = 1; ++ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), ++ &ep->dwc_ep); ++ } ++ } else { ++ if (ep->dwc_ep.num == 0) { ++ pcd->ep0state = EP0_STALL; ++ } ++ ++ ep->stopped = 1; ++ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep->dwc_ep); ++ } ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ return retval; ++} ++ ++int dwc_otg_pcd_ep_halt(dwc_otg_pcd_t * pcd, void *ep_handle, int value) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ dwc_irqflags_t flags; ++ int retval = 0; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ ++ if (!ep || (!ep->desc && ep != &pcd->ep0) || ++ (ep->desc && (ep->desc->bmAttributes == UE_ISOCHRONOUS))) { ++ DWC_WARN("%s, bad ep\n", __func__); ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ DWC_WARN("%d %s XFer In process\n", ep->dwc_ep.num, ++ ep->dwc_ep.is_in ? "IN" : "OUT"); ++ retval = -DWC_E_AGAIN; ++ } else if (value == 0) { ++ dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep); ++ } else if (value == 1) { ++ if (ep->dwc_ep.is_in == 1 && GET_CORE_IF(pcd)->dma_desc_enable) { ++ dtxfsts_data_t txstatus; ++ fifosize_data_t txfifosize; ++ ++ txfifosize.d32 = ++ DWC_READ_REG32(&GET_CORE_IF(pcd)->core_global_regs-> ++ dtxfsiz[ep->dwc_ep.tx_fifo_num]); ++ txstatus.d32 = ++ DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if-> ++ in_ep_regs[ep->dwc_ep.num]->dtxfsts); ++ ++ if (txstatus.b.txfspcavail < txfifosize.b.depth) { ++ DWC_WARN("%s() Data In Tx Fifo\n", __func__); ++ retval = -DWC_E_AGAIN; ++ } else { ++ if (ep->dwc_ep.num == 0) { ++ pcd->ep0state = EP0_STALL; ++ } ++ ++ ep->stopped = 1; ++ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), ++ &ep->dwc_ep); ++ } ++ } else { ++ if (ep->dwc_ep.num == 0) { ++ pcd->ep0state = EP0_STALL; ++ } ++ ++ ep->stopped = 1; ++ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep->dwc_ep); ++ } ++ } else if (value == 2) { ++ ep->dwc_ep.stall_clear_flag = 0; ++ } else if (value == 3) { ++ ep->dwc_ep.stall_clear_flag = 1; ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ return retval; ++} ++ ++/** ++ * This function initiates remote wakeup of the host from suspend state. ++ */ ++void dwc_otg_pcd_rem_wkup_from_suspend(dwc_otg_pcd_t * pcd, int set) ++{ ++ dctl_data_t dctl = { 0 }; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dsts_data_t dsts; ++ ++ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ if (!dsts.b.suspsts) { ++ DWC_WARN("Remote wakeup while is not in suspend state\n"); ++ } ++ /* Check if DEVICE_REMOTE_WAKEUP feature enabled */ ++ if (pcd->remote_wakeup_enable) { ++ if (set) { ++ ++ if (core_if->adp_enable) { ++ gpwrdn_data_t gpwrdn; ++ ++ dwc_otg_adp_probe_stop(core_if); ++ ++ /* Mask SRP detected interrupt from Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.srp_det_msk = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs->gpwrdn, ++ gpwrdn.d32, 0); ++ ++ /* Disable Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs->gpwrdn, ++ gpwrdn.d32, 0); ++ ++ /* ++ * Initialize the Core for Device mode. ++ */ ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ ++ dwc_otg_initiate_srp(core_if); ++ } ++ ++ dctl.b.rmtwkupsig = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ dctl, 0, dctl.d32); ++ DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n"); ++ ++ dwc_mdelay(2); ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ dctl, dctl.d32, 0); ++ DWC_DEBUGPL(DBG_PCD, "Clear Remote Wakeup\n"); ++ } ++ } else { ++ DWC_DEBUGPL(DBG_PCD, "Remote Wakeup is disabled\n"); ++ } ++} ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++/** ++ * This function initiates remote wakeup of the host from L1 sleep state. ++ */ ++void dwc_otg_pcd_rem_wkup_from_sleep(dwc_otg_pcd_t * pcd, int set) ++{ ++ glpmcfg_data_t lpmcfg; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ ++ /* Check if we are in L1 state */ ++ if (!lpmcfg.b.prt_sleep_sts) { ++ DWC_DEBUGPL(DBG_PCD, "Device is not in sleep state\n"); ++ return; ++ } ++ ++ /* Check if host allows remote wakeup */ ++ if (!lpmcfg.b.rem_wkup_en) { ++ DWC_DEBUGPL(DBG_PCD, "Host does not allow remote wakeup\n"); ++ return; ++ } ++ ++ /* Check if Resume OK */ ++ if (!lpmcfg.b.sleep_state_resumeok) { ++ DWC_DEBUGPL(DBG_PCD, "Sleep state resume is not OK\n"); ++ return; ++ } ++ ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ lpmcfg.b.en_utmi_sleep = 0; ++ lpmcfg.b.hird_thres &= (~(1 << 4)); ++ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); ++ ++ if (set) { ++ dctl_data_t dctl = {.d32 = 0 }; ++ dctl.b.rmtwkupsig = 1; ++ /* Set RmtWkUpSig bit to start remote wakup signaling. ++ * Hardware will automatically clear this bit. ++ */ ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, ++ 0, dctl.d32); ++ DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n"); ++ } ++ ++} ++#endif ++ ++/** ++ * Performs remote wakeup. ++ */ ++void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t * pcd, int set) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_irqflags_t flags; ++ if (dwc_otg_is_device_mode(core_if)) { ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ if (core_if->lx_state == DWC_OTG_L1) { ++ dwc_otg_pcd_rem_wkup_from_sleep(pcd, set); ++ } else { ++#endif ++ dwc_otg_pcd_rem_wkup_from_suspend(pcd, set); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ } ++#endif ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ } ++ return; ++} ++ ++void dwc_otg_pcd_disconnect_us(dwc_otg_pcd_t * pcd, int no_of_usecs) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dctl_data_t dctl = { 0 }; ++ ++ if (dwc_otg_is_device_mode(core_if)) { ++ dctl.b.sftdiscon = 1; ++ DWC_PRINTF("Soft disconnect for %d useconds\n",no_of_usecs); ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ dwc_udelay(no_of_usecs); ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32,0); ++ ++ } else{ ++ DWC_PRINTF("NOT SUPPORTED IN HOST MODE\n"); ++ } ++ return; ++ ++} ++ ++int dwc_otg_pcd_wakeup(dwc_otg_pcd_t * pcd) ++{ ++ dsts_data_t dsts; ++ gotgctl_data_t gotgctl; ++ ++ /* ++ * This function starts the Protocol if no session is in progress. If ++ * a session is already in progress, but the device is suspended, ++ * remote wakeup signaling is started. ++ */ ++ ++ /* Check if valid session */ ++ gotgctl.d32 = ++ DWC_READ_REG32(&(GET_CORE_IF(pcd)->core_global_regs->gotgctl)); ++ if (gotgctl.b.bsesvld) { ++ /* Check if suspend state */ ++ dsts.d32 = ++ DWC_READ_REG32(& ++ (GET_CORE_IF(pcd)->dev_if-> ++ dev_global_regs->dsts)); ++ if (dsts.b.suspsts) { ++ dwc_otg_pcd_remote_wakeup(pcd, 1); ++ } ++ } else { ++ dwc_otg_pcd_initiate_srp(pcd); ++ } ++ ++ return 0; ++ ++} ++ ++/** ++ * Start the SRP timer to detect when the SRP does not complete within ++ * 6 seconds. ++ * ++ * @param pcd the pcd structure. ++ */ ++void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t * pcd) ++{ ++ dwc_irqflags_t flags; ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ dwc_otg_initiate_srp(GET_CORE_IF(pcd)); ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++} ++ ++int dwc_otg_pcd_get_frame_number(dwc_otg_pcd_t * pcd) ++{ ++ return dwc_otg_get_frame_number(GET_CORE_IF(pcd)); ++} ++ ++int dwc_otg_pcd_is_lpm_enabled(dwc_otg_pcd_t * pcd) ++{ ++ return GET_CORE_IF(pcd)->core_params->lpm_enable; ++} ++ ++uint32_t get_b_hnp_enable(dwc_otg_pcd_t * pcd) ++{ ++ return pcd->b_hnp_enable; ++} ++ ++uint32_t get_a_hnp_support(dwc_otg_pcd_t * pcd) ++{ ++ return pcd->a_hnp_support; ++} ++ ++uint32_t get_a_alt_hnp_support(dwc_otg_pcd_t * pcd) ++{ ++ return pcd->a_alt_hnp_support; ++} ++ ++int dwc_otg_pcd_get_rmwkup_enable(dwc_otg_pcd_t * pcd) ++{ ++ return pcd->remote_wakeup_enable; ++} ++ ++#endif /* DWC_HOST_ONLY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd.h +@@ -0,0 +1,266 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.h $ ++ * $Revision: #48 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_HOST_ONLY ++#if !defined(__DWC_PCD_H__) ++#define __DWC_PCD_H__ ++ ++#include "dwc_otg_os_dep.h" ++#include "usb.h" ++#include "dwc_otg_cil.h" ++#include "dwc_otg_pcd_if.h" ++struct cfiobject; ++ ++/** ++ * @file ++ * ++ * This file contains the structures, constants, and interfaces for ++ * the Perpherial Contoller Driver (PCD). ++ * ++ * The Peripheral Controller Driver (PCD) for Linux will implement the ++ * Gadget API, so that the existing Gadget drivers can be used. For ++ * the Mass Storage Function driver the File-backed USB Storage Gadget ++ * (FBS) driver will be used. The FBS driver supports the ++ * Control-Bulk (CB), Control-Bulk-Interrupt (CBI), and Bulk-Only ++ * transports. ++ * ++ */ ++ ++/** Invalid DMA Address */ ++#define DWC_DMA_ADDR_INVALID (~(dwc_dma_t)0) ++ ++/** Max Transfer size for any EP */ ++#define DDMA_MAX_TRANSFER_SIZE 65535 ++ ++/** ++ * Get the pointer to the core_if from the pcd pointer. ++ */ ++#define GET_CORE_IF( _pcd ) (_pcd->core_if) ++ ++/** ++ * States of EP0. ++ */ ++typedef enum ep0_state { ++ EP0_DISCONNECT, /* no host */ ++ EP0_IDLE, ++ EP0_IN_DATA_PHASE, ++ EP0_OUT_DATA_PHASE, ++ EP0_IN_STATUS_PHASE, ++ EP0_OUT_STATUS_PHASE, ++ EP0_STALL, ++} ep0state_e; ++ ++/** Fordward declaration.*/ ++struct dwc_otg_pcd; ++ ++/** DWC_otg iso request structure. ++ * ++ */ ++typedef struct usb_iso_request dwc_otg_pcd_iso_request_t; ++ ++#ifdef DWC_UTE_PER_IO ++ ++/** ++ * This shall be the exact analogy of the same type structure defined in the ++ * usb_gadget.h. Each descriptor contains ++ */ ++struct dwc_iso_pkt_desc_port { ++ uint32_t offset; ++ uint32_t length; /* expected length */ ++ uint32_t actual_length; ++ uint32_t status; ++}; ++ ++struct dwc_iso_xreq_port { ++ /** transfer/submission flag */ ++ uint32_t tr_sub_flags; ++ /** Start the request ASAP */ ++#define DWC_EREQ_TF_ASAP 0x00000002 ++ /** Just enqueue the request w/o initiating a transfer */ ++#define DWC_EREQ_TF_ENQUEUE 0x00000004 ++ ++ /** ++ * count of ISO packets attached to this request - shall ++ * not exceed the pio_alloc_pkt_count ++ */ ++ uint32_t pio_pkt_count; ++ /** count of ISO packets allocated for this request */ ++ uint32_t pio_alloc_pkt_count; ++ /** number of ISO packet errors */ ++ uint32_t error_count; ++ /** reserved for future extension */ ++ uint32_t res; ++ /** Will be allocated and freed in the UTE gadget and based on the CFC value */ ++ struct dwc_iso_pkt_desc_port *per_io_frame_descs; ++}; ++#endif ++/** DWC_otg request structure. ++ * This structure is a list of requests. ++ */ ++typedef struct dwc_otg_pcd_request { ++ void *priv; ++ void *buf; ++ dwc_dma_t dma; ++ uint32_t length; ++ uint32_t actual; ++ unsigned sent_zlp:1; ++ /** ++ * Used instead of original buffer if ++ * it(physical address) is not dword-aligned. ++ **/ ++ uint8_t *dw_align_buf; ++ dwc_dma_t dw_align_buf_dma; ++ ++ DWC_CIRCLEQ_ENTRY(dwc_otg_pcd_request) queue_entry; ++#ifdef DWC_UTE_PER_IO ++ struct dwc_iso_xreq_port ext_req; ++ //void *priv_ereq_nport; /* */ ++#endif ++} dwc_otg_pcd_request_t; ++ ++DWC_CIRCLEQ_HEAD(req_list, dwc_otg_pcd_request); ++ ++/** PCD EP structure. ++ * This structure describes an EP, there is an array of EPs in the PCD ++ * structure. ++ */ ++typedef struct dwc_otg_pcd_ep { ++ /** USB EP Descriptor */ ++ const usb_endpoint_descriptor_t *desc; ++ ++ /** queue of dwc_otg_pcd_requests. */ ++ struct req_list queue; ++ unsigned stopped:1; ++ unsigned disabling:1; ++ unsigned dma:1; ++ unsigned queue_sof:1; ++ ++#ifdef DWC_EN_ISOC ++ /** ISOC req handle passed */ ++ void *iso_req_handle; ++#endif //_EN_ISOC_ ++ ++ /** DWC_otg ep data. */ ++ dwc_ep_t dwc_ep; ++ ++ /** Pointer to PCD */ ++ struct dwc_otg_pcd *pcd; ++ ++ void *priv; ++} dwc_otg_pcd_ep_t; ++ ++/** DWC_otg PCD Structure. ++ * This structure encapsulates the data for the dwc_otg PCD. ++ */ ++struct dwc_otg_pcd { ++ const struct dwc_otg_pcd_function_ops *fops; ++ /** The DWC otg device pointer */ ++ struct dwc_otg_device *otg_dev; ++ /** Core Interface */ ++ dwc_otg_core_if_t *core_if; ++ /** State of EP0 */ ++ ep0state_e ep0state; ++ /** EP0 Request is pending */ ++ unsigned ep0_pending:1; ++ /** Indicates when SET CONFIGURATION Request is in process */ ++ unsigned request_config:1; ++ /** The state of the Remote Wakeup Enable. */ ++ unsigned remote_wakeup_enable:1; ++ /** The state of the B-Device HNP Enable. */ ++ unsigned b_hnp_enable:1; ++ /** The state of A-Device HNP Support. */ ++ unsigned a_hnp_support:1; ++ /** The state of the A-Device Alt HNP support. */ ++ unsigned a_alt_hnp_support:1; ++ /** Count of pending Requests */ ++ unsigned request_pending; ++ ++ /** SETUP packet for EP0 ++ * This structure is allocated as a DMA buffer on PCD initialization ++ * with enough space for up to 3 setup packets. ++ */ ++ union { ++ usb_device_request_t req; ++ uint32_t d32[2]; ++ } *setup_pkt; ++ ++ dwc_dma_t setup_pkt_dma_handle; ++ ++ /* Additional buffer and flag for CTRL_WR premature case */ ++ uint8_t *backup_buf; ++ unsigned data_terminated; ++ ++ /** 2-byte dma buffer used to return status from GET_STATUS */ ++ uint16_t *status_buf; ++ dwc_dma_t status_buf_dma_handle; ++ ++ /** EP0 */ ++ dwc_otg_pcd_ep_t ep0; ++ ++ /** Array of IN EPs. */ ++ dwc_otg_pcd_ep_t in_ep[MAX_EPS_CHANNELS - 1]; ++ /** Array of OUT EPs. */ ++ dwc_otg_pcd_ep_t out_ep[MAX_EPS_CHANNELS - 1]; ++ /** number of valid EPs in the above array. */ ++// unsigned num_eps : 4; ++ dwc_spinlock_t *lock; ++ ++ /** Tasklet to defer starting of TEST mode transmissions until ++ * Status Phase has been completed. ++ */ ++ dwc_tasklet_t *test_mode_tasklet; ++ ++ /** Tasklet to delay starting of xfer in DMA mode */ ++ dwc_tasklet_t *start_xfer_tasklet; ++ ++ /** The test mode to enter when the tasklet is executed. */ ++ unsigned test_mode; ++ /** The cfi_api structure that implements most of the CFI API ++ * and OTG specific core configuration functionality ++ */ ++#ifdef DWC_UTE_CFI ++ struct cfiobject *cfi; ++#endif ++ ++}; ++ ++//FIXME this functions should be static, and this prototypes should be removed ++extern void dwc_otg_request_nuke(dwc_otg_pcd_ep_t * ep); ++extern void dwc_otg_request_done(dwc_otg_pcd_ep_t * ep, ++ dwc_otg_pcd_request_t * req, int32_t status); ++ ++void dwc_otg_iso_buffer_done(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep, ++ void *req_handle); ++ ++extern void do_test_mode(void *data); ++#endif ++#endif /* DWC_HOST_ONLY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h +@@ -0,0 +1,360 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_if.h $ ++ * $Revision: #11 $ ++ * $Date: 2011/10/26 $ ++ * $Change: 1873028 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_HOST_ONLY ++ ++#if !defined(__DWC_PCD_IF_H__) ++#define __DWC_PCD_IF_H__ ++ ++//#include "dwc_os.h" ++#include "dwc_otg_core_if.h" ++ ++/** @file ++ * This file defines DWC_OTG PCD Core API. ++ */ ++ ++struct dwc_otg_pcd; ++typedef struct dwc_otg_pcd dwc_otg_pcd_t; ++ ++/** Maxpacket size for EP0 */ ++#define MAX_EP0_SIZE 64 ++/** Maxpacket size for any EP */ ++#define MAX_PACKET_SIZE 1024 ++ ++/** @name Function Driver Callbacks */ ++/** @{ */ ++ ++/** This function will be called whenever a previously queued request has ++ * completed. The status value will be set to -DWC_E_SHUTDOWN to indicated a ++ * failed or aborted transfer, or -DWC_E_RESTART to indicate the device was reset, ++ * or -DWC_E_TIMEOUT to indicate it timed out, or -DWC_E_INVALID to indicate invalid ++ * parameters. */ ++typedef int (*dwc_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle, int32_t status, ++ uint32_t actual); ++/** ++ * This function will be called whenever a previousle queued ISOC request has ++ * completed. Count of ISOC packets could be read using dwc_otg_pcd_get_iso_packet_count ++ * function. ++ * The status of each ISOC packet could be read using dwc_otg_pcd_get_iso_packet_* ++ * functions. ++ */ ++typedef int (*dwc_isoc_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle, int proc_buf_num); ++/** This function should handle any SETUP request that cannot be handled by the ++ * PCD Core. This includes most GET_DESCRIPTORs, SET_CONFIGS, Any ++ * class-specific requests, etc. The function must non-blocking. ++ * ++ * Returns 0 on success. ++ * Returns -DWC_E_NOT_SUPPORTED if the request is not supported. ++ * Returns -DWC_E_INVALID if the setup request had invalid parameters or bytes. ++ * Returns -DWC_E_SHUTDOWN on any other error. */ ++typedef int (*dwc_setup_cb_t) (dwc_otg_pcd_t * pcd, uint8_t * bytes); ++/** This is called whenever the device has been disconnected. The function ++ * driver should take appropriate action to clean up all pending requests in the ++ * PCD Core, remove all endpoints (except ep0), and initialize back to reset ++ * state. */ ++typedef int (*dwc_disconnect_cb_t) (dwc_otg_pcd_t * pcd); ++/** This function is called when device has been connected. */ ++typedef int (*dwc_connect_cb_t) (dwc_otg_pcd_t * pcd, int speed); ++/** This function is called when device has been suspended */ ++typedef int (*dwc_suspend_cb_t) (dwc_otg_pcd_t * pcd); ++/** This function is called when device has received LPM tokens, i.e. ++ * device has been sent to sleep state. */ ++typedef int (*dwc_sleep_cb_t) (dwc_otg_pcd_t * pcd); ++/** This function is called when device has been resumed ++ * from suspend(L2) or L1 sleep state. */ ++typedef int (*dwc_resume_cb_t) (dwc_otg_pcd_t * pcd); ++/** This function is called whenever hnp params has been changed. ++ * User can call get_b_hnp_enable, get_a_hnp_support, get_a_alt_hnp_support functions ++ * to get hnp parameters. */ ++typedef int (*dwc_hnp_params_changed_cb_t) (dwc_otg_pcd_t * pcd); ++/** This function is called whenever USB RESET is detected. */ ++typedef int (*dwc_reset_cb_t) (dwc_otg_pcd_t * pcd); ++ ++typedef int (*cfi_setup_cb_t) (dwc_otg_pcd_t * pcd, void *ctrl_req_bytes); ++ ++/** ++ * ++ * @param ep_handle Void pointer to the usb_ep structure ++ * @param ereq_port Pointer to the extended request structure created in the ++ * portable part. ++ */ ++typedef int (*xiso_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle, int32_t status, ++ void *ereq_port); ++/** Function Driver Ops Data Structure */ ++struct dwc_otg_pcd_function_ops { ++ dwc_connect_cb_t connect; ++ dwc_disconnect_cb_t disconnect; ++ dwc_setup_cb_t setup; ++ dwc_completion_cb_t complete; ++ dwc_isoc_completion_cb_t isoc_complete; ++ dwc_suspend_cb_t suspend; ++ dwc_sleep_cb_t sleep; ++ dwc_resume_cb_t resume; ++ dwc_reset_cb_t reset; ++ dwc_hnp_params_changed_cb_t hnp_changed; ++ cfi_setup_cb_t cfi_setup; ++#ifdef DWC_UTE_PER_IO ++ xiso_completion_cb_t xisoc_complete; ++#endif ++}; ++/** @} */ ++ ++/** @name Function Driver Functions */ ++/** @{ */ ++ ++/** Call this function to get pointer on dwc_otg_pcd_t, ++ * this pointer will be used for all PCD API functions. ++ * ++ * @param core_if The DWC_OTG Core ++ */ ++extern dwc_otg_pcd_t *dwc_otg_pcd_init(dwc_otg_core_if_t * core_if); ++ ++/** Frees PCD allocated by dwc_otg_pcd_init ++ * ++ * @param pcd The PCD ++ */ ++extern void dwc_otg_pcd_remove(dwc_otg_pcd_t * pcd); ++ ++/** Call this to bind the function driver to the PCD Core. ++ * ++ * @param pcd Pointer on dwc_otg_pcd_t returned by dwc_otg_pcd_init function. ++ * @param fops The Function Driver Ops data structure containing pointers to all callbacks. ++ */ ++extern void dwc_otg_pcd_start(dwc_otg_pcd_t * pcd, ++ const struct dwc_otg_pcd_function_ops *fops); ++ ++/** Enables an endpoint for use. This function enables an endpoint in ++ * the PCD. The endpoint is described by the ep_desc which has the ++ * same format as a USB ep descriptor. The ep_handle parameter is used to refer ++ * to the endpoint from other API functions and in callbacks. Normally this ++ * should be called after a SET_CONFIGURATION/SET_INTERFACE to configure the ++ * core for that interface. ++ * ++ * Returns -DWC_E_INVALID if invalid parameters were passed. ++ * Returns -DWC_E_SHUTDOWN if any other error ocurred. ++ * Returns 0 on success. ++ * ++ * @param pcd The PCD ++ * @param ep_desc Endpoint descriptor ++ * @param usb_ep Handle on endpoint, that will be used to identify endpoint. ++ */ ++extern int dwc_otg_pcd_ep_enable(dwc_otg_pcd_t * pcd, ++ const uint8_t * ep_desc, void *usb_ep); ++ ++/** Disable the endpoint referenced by ep_handle. ++ * ++ * Returns -DWC_E_INVALID if invalid parameters were passed. ++ * Returns -DWC_E_SHUTDOWN if any other error occurred. ++ * Returns 0 on success. */ ++extern int dwc_otg_pcd_ep_disable(dwc_otg_pcd_t * pcd, void *ep_handle); ++ ++/** Queue a data transfer request on the endpoint referenced by ep_handle. ++ * After the transfer is completes, the complete callback will be called with ++ * the request status. ++ * ++ * @param pcd The PCD ++ * @param ep_handle The handle of the endpoint ++ * @param buf The buffer for the data ++ * @param dma_buf The DMA buffer for the data ++ * @param buflen The length of the data transfer ++ * @param zero Specifies whether to send zero length last packet. ++ * @param req_handle Set this handle to any value to use to reference this ++ * request in the ep_dequeue function or from the complete callback ++ * @param atomic_alloc If driver need to perform atomic allocations ++ * for internal data structures. ++ * ++ * Returns -DWC_E_INVALID if invalid parameters were passed. ++ * Returns -DWC_E_SHUTDOWN if any other error ocurred. ++ * Returns 0 on success. */ ++extern int dwc_otg_pcd_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle, ++ uint8_t * buf, dwc_dma_t dma_buf, ++ uint32_t buflen, int zero, void *req_handle, ++ int atomic_alloc); ++#ifdef DWC_UTE_PER_IO ++/** ++ * ++ * @param ereq_nonport Pointer to the extended request part of the ++ * usb_request structure defined in usb_gadget.h file. ++ */ ++extern int dwc_otg_pcd_xiso_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle, ++ uint8_t * buf, dwc_dma_t dma_buf, ++ uint32_t buflen, int zero, ++ void *req_handle, int atomic_alloc, ++ void *ereq_nonport); ++ ++#endif ++ ++/** De-queue the specified data transfer that has not yet completed. ++ * ++ * Returns -DWC_E_INVALID if invalid parameters were passed. ++ * Returns -DWC_E_SHUTDOWN if any other error ocurred. ++ * Returns 0 on success. */ ++extern int dwc_otg_pcd_ep_dequeue(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle); ++ ++/** Halt (STALL) an endpoint or clear it. ++ * ++ * Returns -DWC_E_INVALID if invalid parameters were passed. ++ * Returns -DWC_E_SHUTDOWN if any other error ocurred. ++ * Returns -DWC_E_AGAIN if the STALL cannot be sent and must be tried again later ++ * Returns 0 on success. */ ++extern int dwc_otg_pcd_ep_halt(dwc_otg_pcd_t * pcd, void *ep_handle, int value); ++ ++/** This function */ ++extern int dwc_otg_pcd_ep_wedge(dwc_otg_pcd_t * pcd, void *ep_handle); ++ ++/** This function should be called on every hardware interrupt */ ++extern int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t * pcd); ++ ++/** This function returns current frame number */ ++extern int dwc_otg_pcd_get_frame_number(dwc_otg_pcd_t * pcd); ++ ++/** ++ * Start isochronous transfers on the endpoint referenced by ep_handle. ++ * For isochronous transfers duble buffering is used. ++ * After processing each of buffers comlete callback will be called with ++ * status for each transaction. ++ * ++ * @param pcd The PCD ++ * @param ep_handle The handle of the endpoint ++ * @param buf0 The virtual address of first data buffer ++ * @param buf1 The virtual address of second data buffer ++ * @param dma0 The DMA address of first data buffer ++ * @param dma1 The DMA address of second data buffer ++ * @param sync_frame Data pattern frame number ++ * @param dp_frame Data size for pattern frame ++ * @param data_per_frame Data size for regular frame ++ * @param start_frame Frame number to start transfers, if -1 then start transfers ASAP. ++ * @param buf_proc_intrvl Interval of ISOC Buffer processing ++ * @param req_handle Handle of ISOC request ++ * @param atomic_alloc Specefies whether to perform atomic allocation for ++ * internal data structures. ++ * ++ * Returns -DWC_E_NO_MEMORY if there is no enough memory. ++ * Returns -DWC_E_INVALID if incorrect arguments are passed to the function. ++ * Returns -DW_E_SHUTDOWN for any other error. ++ * Returns 0 on success ++ */ ++extern int dwc_otg_pcd_iso_ep_start(dwc_otg_pcd_t * pcd, void *ep_handle, ++ uint8_t * buf0, uint8_t * buf1, ++ dwc_dma_t dma0, dwc_dma_t dma1, ++ int sync_frame, int dp_frame, ++ int data_per_frame, int start_frame, ++ int buf_proc_intrvl, void *req_handle, ++ int atomic_alloc); ++ ++/** Stop ISOC transfers on endpoint referenced by ep_handle. ++ * ++ * @param pcd The PCD ++ * @param ep_handle The handle of the endpoint ++ * @param req_handle Handle of ISOC request ++ * ++ * Returns -DWC_E_INVALID if incorrect arguments are passed to the function ++ * Returns 0 on success ++ */ ++int dwc_otg_pcd_iso_ep_stop(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle); ++ ++/** Get ISOC packet status. ++ * ++ * @param pcd The PCD ++ * @param ep_handle The handle of the endpoint ++ * @param iso_req_handle Isochronoush request handle ++ * @param packet Number of packet ++ * @param status Out parameter for returning status ++ * @param actual Out parameter for returning actual length ++ * @param offset Out parameter for returning offset ++ * ++ */ ++extern void dwc_otg_pcd_get_iso_packet_params(dwc_otg_pcd_t * pcd, ++ void *ep_handle, ++ void *iso_req_handle, int packet, ++ int *status, int *actual, ++ int *offset); ++ ++/** Get ISOC packet count. ++ * ++ * @param pcd The PCD ++ * @param ep_handle The handle of the endpoint ++ * @param iso_req_handle ++ */ ++extern int dwc_otg_pcd_get_iso_packet_count(dwc_otg_pcd_t * pcd, ++ void *ep_handle, ++ void *iso_req_handle); ++ ++/** This function starts the SRP Protocol if no session is in progress. If ++ * a session is already in progress, but the device is suspended, ++ * remote wakeup signaling is started. ++ */ ++extern int dwc_otg_pcd_wakeup(dwc_otg_pcd_t * pcd); ++ ++/** This function returns 1 if LPM support is enabled, and 0 otherwise. */ ++extern int dwc_otg_pcd_is_lpm_enabled(dwc_otg_pcd_t * pcd); ++ ++/** This function returns 1 if remote wakeup is allowed and 0, otherwise. */ ++extern int dwc_otg_pcd_get_rmwkup_enable(dwc_otg_pcd_t * pcd); ++ ++/** Initiate SRP */ ++extern void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t * pcd); ++ ++/** Starts remote wakeup signaling. */ ++extern void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t * pcd, int set); ++ ++/** Starts micorsecond soft disconnect. */ ++extern void dwc_otg_pcd_disconnect_us(dwc_otg_pcd_t * pcd, int no_of_usecs); ++/** This function returns whether device is dualspeed.*/ ++extern uint32_t dwc_otg_pcd_is_dualspeed(dwc_otg_pcd_t * pcd); ++ ++/** This function returns whether device is otg. */ ++extern uint32_t dwc_otg_pcd_is_otg(dwc_otg_pcd_t * pcd); ++ ++/** These functions allow to get hnp parameters */ ++extern uint32_t get_b_hnp_enable(dwc_otg_pcd_t * pcd); ++extern uint32_t get_a_hnp_support(dwc_otg_pcd_t * pcd); ++extern uint32_t get_a_alt_hnp_support(dwc_otg_pcd_t * pcd); ++ ++/** CFI specific Interface functions */ ++/** Allocate a cfi buffer */ ++extern uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, ++ dwc_dma_t * addr, size_t buflen, ++ int flags); ++ ++/******************************************************************************/ ++ ++/** @} */ ++ ++#endif /* __DWC_PCD_IF_H__ */ ++ ++#endif /* DWC_HOST_ONLY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c +@@ -0,0 +1,5147 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_intr.c $ ++ * $Revision: #116 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_HOST_ONLY ++ ++#include "dwc_otg_pcd.h" ++ ++#ifdef DWC_UTE_CFI ++#include "dwc_otg_cfi.h" ++#endif ++ ++#ifdef DWC_UTE_PER_IO ++extern void complete_xiso_ep(dwc_otg_pcd_ep_t * ep); ++#endif ++//#define PRINT_CFI_DMA_DESCS ++ ++#define DEBUG_EP0 ++ ++/** ++ * This function updates OTG. ++ */ ++static void dwc_otg_pcd_update_otg(dwc_otg_pcd_t * pcd, const unsigned reset) ++{ ++ ++ if (reset) { ++ pcd->b_hnp_enable = 0; ++ pcd->a_hnp_support = 0; ++ pcd->a_alt_hnp_support = 0; ++ } ++ ++ if (pcd->fops->hnp_changed) { ++ pcd->fops->hnp_changed(pcd); ++ } ++} ++ ++/** @file ++ * This file contains the implementation of the PCD Interrupt handlers. ++ * ++ * The PCD handles the device interrupts. Many conditions can cause a ++ * device interrupt. When an interrupt occurs, the device interrupt ++ * service routine determines the cause of the interrupt and ++ * dispatches handling to the appropriate function. These interrupt ++ * handling functions are described below. ++ * All interrupt registers are processed from LSB to MSB. ++ */ ++ ++/** ++ * This function prints the ep0 state for debug purposes. ++ */ ++static inline void print_ep0_state(dwc_otg_pcd_t * pcd) ++{ ++#ifdef DEBUG ++ char str[40]; ++ ++ switch (pcd->ep0state) { ++ case EP0_DISCONNECT: ++ dwc_strcpy(str, "EP0_DISCONNECT"); ++ break; ++ case EP0_IDLE: ++ dwc_strcpy(str, "EP0_IDLE"); ++ break; ++ case EP0_IN_DATA_PHASE: ++ dwc_strcpy(str, "EP0_IN_DATA_PHASE"); ++ break; ++ case EP0_OUT_DATA_PHASE: ++ dwc_strcpy(str, "EP0_OUT_DATA_PHASE"); ++ break; ++ case EP0_IN_STATUS_PHASE: ++ dwc_strcpy(str, "EP0_IN_STATUS_PHASE"); ++ break; ++ case EP0_OUT_STATUS_PHASE: ++ dwc_strcpy(str, "EP0_OUT_STATUS_PHASE"); ++ break; ++ case EP0_STALL: ++ dwc_strcpy(str, "EP0_STALL"); ++ break; ++ default: ++ dwc_strcpy(str, "EP0_INVALID"); ++ } ++ ++ DWC_DEBUGPL(DBG_ANY, "%s(%d)\n", str, pcd->ep0state); ++#endif ++} ++ ++/** ++ * This function calculate the size of the payload in the memory ++ * for out endpoints and prints size for debug purposes(used in ++ * 2.93a DevOutNak feature). ++ */ ++static inline void print_memory_payload(dwc_otg_pcd_t * pcd, dwc_ep_t * ep) ++{ ++#ifdef DEBUG ++ deptsiz_data_t deptsiz_init = {.d32 = 0 }; ++ deptsiz_data_t deptsiz_updt = {.d32 = 0 }; ++ int pack_num; ++ unsigned payload; ++ ++ deptsiz_init.d32 = pcd->core_if->start_doeptsiz_val[ep->num]; ++ deptsiz_updt.d32 = ++ DWC_READ_REG32(&pcd->core_if->dev_if-> ++ out_ep_regs[ep->num]->doeptsiz); ++ /* Payload will be */ ++ payload = deptsiz_init.b.xfersize - deptsiz_updt.b.xfersize; ++ /* Packet count is decremented every time a packet ++ * is written to the RxFIFO not in to the external memory ++ * So, if payload == 0, then it means no packet was sent to ext memory*/ ++ pack_num = (!payload) ? 0 : (deptsiz_init.b.pktcnt - deptsiz_updt.b.pktcnt); ++ DWC_DEBUGPL(DBG_PCDV, ++ "Payload for EP%d-%s\n", ++ ep->num, (ep->is_in ? "IN" : "OUT")); ++ DWC_DEBUGPL(DBG_PCDV, ++ "Number of transfered bytes = 0x%08x\n", payload); ++ DWC_DEBUGPL(DBG_PCDV, ++ "Number of transfered packets = %d\n", pack_num); ++#endif ++} ++ ++ ++#ifdef DWC_UTE_CFI ++static inline void print_desc(struct dwc_otg_dma_desc *ddesc, ++ const uint8_t * epname, int descnum) ++{ ++ CFI_INFO ++ ("%s DMA_DESC(%d) buf=0x%08x bytes=0x%04x; sp=0x%x; l=0x%x; sts=0x%02x; bs=0x%02x\n", ++ epname, descnum, ddesc->buf, ddesc->status.b.bytes, ++ ddesc->status.b.sp, ddesc->status.b.l, ddesc->status.b.sts, ++ ddesc->status.b.bs); ++} ++#endif ++ ++/** ++ * This function returns pointer to in ep struct with number ep_num ++ */ ++static inline dwc_otg_pcd_ep_t *get_in_ep(dwc_otg_pcd_t * pcd, uint32_t ep_num) ++{ ++ int i; ++ int num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps; ++ if (ep_num == 0) { ++ return &pcd->ep0; ++ } else { ++ for (i = 0; i < num_in_eps; ++i) { ++ if (pcd->in_ep[i].dwc_ep.num == ep_num) ++ return &pcd->in_ep[i]; ++ } ++ return 0; ++ } ++} ++ ++/** ++ * This function returns pointer to out ep struct with number ep_num ++ */ ++static inline dwc_otg_pcd_ep_t *get_out_ep(dwc_otg_pcd_t * pcd, uint32_t ep_num) ++{ ++ int i; ++ int num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps; ++ if (ep_num == 0) { ++ return &pcd->ep0; ++ } else { ++ for (i = 0; i < num_out_eps; ++i) { ++ if (pcd->out_ep[i].dwc_ep.num == ep_num) ++ return &pcd->out_ep[i]; ++ } ++ return 0; ++ } ++} ++ ++/** ++ * This functions gets a pointer to an EP from the wIndex address ++ * value of the control request. ++ */ ++dwc_otg_pcd_ep_t *get_ep_by_addr(dwc_otg_pcd_t * pcd, u16 wIndex) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ uint32_t ep_num = UE_GET_ADDR(wIndex); ++ ++ if (ep_num == 0) { ++ ep = &pcd->ep0; ++ } else if (UE_GET_DIR(wIndex) == UE_DIR_IN) { /* in ep */ ++ ep = &pcd->in_ep[ep_num - 1]; ++ } else { ++ ep = &pcd->out_ep[ep_num - 1]; ++ } ++ ++ return ep; ++} ++ ++/** ++ * This function checks the EP request queue, if the queue is not ++ * empty the next request is started. ++ */ ++void start_next_request(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_otg_pcd_request_t *req = 0; ++ uint32_t max_transfer = ++ GET_CORE_IF(ep->pcd)->core_params->max_transfer_size; ++ ++#ifdef DWC_UTE_CFI ++ struct dwc_otg_pcd *pcd; ++ pcd = ep->pcd; ++#endif ++ ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ ++#ifdef DWC_UTE_CFI ++ if (ep->dwc_ep.buff_mode != BM_STANDARD) { ++ ep->dwc_ep.cfi_req_len = req->length; ++ pcd->cfi->ops.build_descriptors(pcd->cfi, pcd, ep, req); ++ } else { ++#endif ++ /* Setup and start the Transfer */ ++ if (req->dw_align_buf) { ++ ep->dwc_ep.dma_addr = req->dw_align_buf_dma; ++ ep->dwc_ep.start_xfer_buff = req->dw_align_buf; ++ ep->dwc_ep.xfer_buff = req->dw_align_buf; ++ } else { ++ ep->dwc_ep.dma_addr = req->dma; ++ ep->dwc_ep.start_xfer_buff = req->buf; ++ ep->dwc_ep.xfer_buff = req->buf; ++ } ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = req->length; ++ ep->dwc_ep.xfer_len = 0; ++ ep->dwc_ep.xfer_count = 0; ++ ++ ep->dwc_ep.maxxfer = max_transfer; ++ if (GET_CORE_IF(ep->pcd)->dma_desc_enable) { ++ uint32_t out_max_xfer = DDMA_MAX_TRANSFER_SIZE ++ - (DDMA_MAX_TRANSFER_SIZE % 4); ++ if (ep->dwc_ep.is_in) { ++ if (ep->dwc_ep.maxxfer > ++ DDMA_MAX_TRANSFER_SIZE) { ++ ep->dwc_ep.maxxfer = ++ DDMA_MAX_TRANSFER_SIZE; ++ } ++ } else { ++ if (ep->dwc_ep.maxxfer > out_max_xfer) { ++ ep->dwc_ep.maxxfer = ++ out_max_xfer; ++ } ++ } ++ } ++ if (ep->dwc_ep.maxxfer < ep->dwc_ep.total_len) { ++ ep->dwc_ep.maxxfer -= ++ (ep->dwc_ep.maxxfer % ep->dwc_ep.maxpacket); ++ } ++ if (req->sent_zlp) { ++ if ((ep->dwc_ep.total_len % ++ ep->dwc_ep.maxpacket == 0) ++ && (ep->dwc_ep.total_len != 0)) { ++ ep->dwc_ep.sent_zlp = 1; ++ } ++ ++ } ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ dwc_otg_ep_start_transfer(GET_CORE_IF(ep->pcd), &ep->dwc_ep); ++ } else if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { ++ DWC_PRINTF("There are no more ISOC requests \n"); ++ ep->dwc_ep.frame_num = 0xFFFFFFFF; ++ } ++} ++ ++/** ++ * This function handles the SOF Interrupts. At this time the SOF ++ * Interrupt is disabled. ++ */ ++int32_t dwc_otg_pcd_handle_sof_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ ++ gintsts_data_t gintsts; ++ ++ DWC_DEBUGPL(DBG_PCD, "SOF\n"); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.sofintr = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This function handles the Rx Status Queue Level Interrupt, which ++ * indicates that there is a least one packet in the Rx FIFO. The ++ * packets are moved from the FIFO to memory, where they will be ++ * processed when the Endpoint Interrupt Register indicates Transfer ++ * Complete or SETUP Phase Done. ++ * ++ * Repeat the following until the Rx Status Queue is empty: ++ * -# Read the Receive Status Pop Register (GRXSTSP) to get Packet ++ * info ++ * -# If Receive FIFO is empty then skip to step Clear the interrupt ++ * and exit ++ * -# If SETUP Packet call dwc_otg_read_setup_packet to copy the ++ * SETUP data to the buffer ++ * -# If OUT Data Packet call dwc_otg_read_packet to copy the data ++ * to the destination buffer ++ */ ++int32_t dwc_otg_pcd_handle_rx_status_q_level_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ gintmsk_data_t gintmask = {.d32 = 0 }; ++ device_grxsts_data_t status; ++ dwc_otg_pcd_ep_t *ep; ++ gintsts_data_t gintsts; ++#ifdef DEBUG ++ static char *dpid_str[] = { "D0", "D2", "D1", "MDATA" }; ++#endif ++ ++ //DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _pcd); ++ /* Disable the Rx Status Queue Level interrupt */ ++ gintmask.b.rxstsqlvl = 1; ++ DWC_MODIFY_REG32(&global_regs->gintmsk, gintmask.d32, 0); ++ ++ /* Get the Status from the top of the FIFO */ ++ status.d32 = DWC_READ_REG32(&global_regs->grxstsp); ++ ++ DWC_DEBUGPL(DBG_PCD, "EP:%d BCnt:%d DPID:%s " ++ "pktsts:%x Frame:%d(0x%0x)\n", ++ status.b.epnum, status.b.bcnt, ++ dpid_str[status.b.dpid], ++ status.b.pktsts, status.b.fn, status.b.fn); ++ /* Get pointer to EP structure */ ++ ep = get_out_ep(pcd, status.b.epnum); ++ ++ switch (status.b.pktsts) { ++ case DWC_DSTS_GOUT_NAK: ++ DWC_DEBUGPL(DBG_PCDV, "Global OUT NAK\n"); ++ break; ++ case DWC_STS_DATA_UPDT: ++ DWC_DEBUGPL(DBG_PCDV, "OUT Data Packet\n"); ++ if (status.b.bcnt && ep->dwc_ep.xfer_buff) { ++ /** @todo NGS Check for buffer overflow? */ ++ dwc_otg_read_packet(core_if, ++ ep->dwc_ep.xfer_buff, ++ status.b.bcnt); ++ ep->dwc_ep.xfer_count += status.b.bcnt; ++ ep->dwc_ep.xfer_buff += status.b.bcnt; ++ } ++ break; ++ case DWC_STS_XFER_COMP: ++ DWC_DEBUGPL(DBG_PCDV, "OUT Complete\n"); ++ break; ++ case DWC_DSTS_SETUP_COMP: ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "Setup Complete\n"); ++#endif ++ break; ++ case DWC_DSTS_SETUP_UPDT: ++ dwc_otg_read_setup_packet(core_if, pcd->setup_pkt->d32); ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, ++ "SETUP PKT: %02x.%02x v%04x i%04x l%04x\n", ++ pcd->setup_pkt->req.bmRequestType, ++ pcd->setup_pkt->req.bRequest, ++ UGETW(pcd->setup_pkt->req.wValue), ++ UGETW(pcd->setup_pkt->req.wIndex), ++ UGETW(pcd->setup_pkt->req.wLength)); ++#endif ++ ep->dwc_ep.xfer_count += status.b.bcnt; ++ break; ++ default: ++ DWC_DEBUGPL(DBG_PCDV, "Invalid Packet Status (0x%0x)\n", ++ status.b.pktsts); ++ break; ++ } ++ ++ /* Enable the Rx Status Queue Level interrupt */ ++ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmask.d32); ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.rxstsqlvl = 1; ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ //DWC_DEBUGPL(DBG_PCDV, "EXIT: %s\n", __func__); ++ return 1; ++} ++ ++/** ++ * This function examines the Device IN Token Learning Queue to ++ * determine the EP number of the last IN token received. This ++ * implementation is for the Mass Storage device where there are only ++ * 2 IN EPs (Control-IN and BULK-IN). ++ * ++ * The EP numbers for the first six IN Tokens are in DTKNQR1 and there ++ * are 8 EP Numbers in each of the other possible DTKNQ Registers. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * ++ */ ++static inline int get_ep_of_last_in_token(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_device_global_regs_t *dev_global_regs = ++ core_if->dev_if->dev_global_regs; ++ const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth; ++ /* Number of Token Queue Registers */ ++ const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8; ++ dtknq1_data_t dtknqr1; ++ uint32_t in_tkn_epnums[4]; ++ int ndx = 0; ++ int i = 0; ++ volatile uint32_t *addr = &dev_global_regs->dtknqr1; ++ int epnum = 0; ++ ++ //DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH); ++ ++ /* Read the DTKNQ Registers */ ++ for (i = 0; i < DTKNQ_REG_CNT; i++) { ++ in_tkn_epnums[i] = DWC_READ_REG32(addr); ++ DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i + 1, ++ in_tkn_epnums[i]); ++ if (addr == &dev_global_regs->dvbusdis) { ++ addr = &dev_global_regs->dtknqr3_dthrctl; ++ } else { ++ ++addr; ++ } ++ ++ } ++ ++ /* Copy the DTKNQR1 data to the bit field. */ ++ dtknqr1.d32 = in_tkn_epnums[0]; ++ /* Get the EP numbers */ ++ in_tkn_epnums[0] = dtknqr1.b.epnums0_5; ++ ndx = dtknqr1.b.intknwptr - 1; ++ ++ //DWC_DEBUGPL(DBG_PCDV,"ndx=%d\n",ndx); ++ if (ndx == -1) { ++ /** @todo Find a simpler way to calculate the max ++ * queue position.*/ ++ int cnt = TOKEN_Q_DEPTH; ++ if (TOKEN_Q_DEPTH <= 6) { ++ cnt = TOKEN_Q_DEPTH - 1; ++ } else if (TOKEN_Q_DEPTH <= 14) { ++ cnt = TOKEN_Q_DEPTH - 7; ++ } else if (TOKEN_Q_DEPTH <= 22) { ++ cnt = TOKEN_Q_DEPTH - 15; ++ } else { ++ cnt = TOKEN_Q_DEPTH - 23; ++ } ++ epnum = (in_tkn_epnums[DTKNQ_REG_CNT - 1] >> (cnt * 4)) & 0xF; ++ } else { ++ if (ndx <= 5) { ++ epnum = (in_tkn_epnums[0] >> (ndx * 4)) & 0xF; ++ } else if (ndx <= 13) { ++ ndx -= 6; ++ epnum = (in_tkn_epnums[1] >> (ndx * 4)) & 0xF; ++ } else if (ndx <= 21) { ++ ndx -= 14; ++ epnum = (in_tkn_epnums[2] >> (ndx * 4)) & 0xF; ++ } else if (ndx <= 29) { ++ ndx -= 22; ++ epnum = (in_tkn_epnums[3] >> (ndx * 4)) & 0xF; ++ } ++ } ++ //DWC_DEBUGPL(DBG_PCD,"epnum=%d\n",epnum); ++ return epnum; ++} ++ ++/** ++ * This interrupt occurs when the non-periodic Tx FIFO is half-empty. ++ * The active request is checked for the next packet to be loaded into ++ * the non-periodic Tx FIFO. ++ */ ++int32_t dwc_otg_pcd_handle_np_tx_fifo_empty_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ dwc_otg_dev_in_ep_regs_t *ep_regs; ++ gnptxsts_data_t txstatus = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ ++ int epnum = 0; ++ dwc_otg_pcd_ep_t *ep = 0; ++ uint32_t len = 0; ++ int dwords; ++ ++ /* Get the epnum from the IN Token Learning Queue. */ ++ epnum = get_ep_of_last_in_token(core_if); ++ ep = get_in_ep(pcd, epnum); ++ ++ DWC_DEBUGPL(DBG_PCD, "NP TxFifo Empty: %d \n", epnum); ++ ++ ep_regs = core_if->dev_if->in_ep_regs[epnum]; ++ ++ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; ++ if (len > ep->dwc_ep.maxpacket) { ++ len = ep->dwc_ep.maxpacket; ++ } ++ dwords = (len + 3) / 4; ++ ++ /* While there is space in the queue and space in the FIFO and ++ * More data to tranfer, Write packets to the Tx FIFO */ ++ txstatus.d32 = DWC_READ_REG32(&global_regs->gnptxsts); ++ DWC_DEBUGPL(DBG_PCDV, "b4 GNPTXSTS=0x%08x\n", txstatus.d32); ++ ++ while (txstatus.b.nptxqspcavail > 0 && ++ txstatus.b.nptxfspcavail > dwords && ++ ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len) { ++ /* Write the FIFO */ ++ dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0); ++ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; ++ ++ if (len > ep->dwc_ep.maxpacket) { ++ len = ep->dwc_ep.maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ txstatus.d32 = DWC_READ_REG32(&global_regs->gnptxsts); ++ DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n", txstatus.d32); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n", ++ DWC_READ_REG32(&global_regs->gnptxsts)); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.nptxfempty = 1; ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This function is called when dedicated Tx FIFO Empty interrupt occurs. ++ * The active request is checked for the next packet to be loaded into ++ * apropriate Tx FIFO. ++ */ ++static int32_t write_empty_tx_fifo(dwc_otg_pcd_t * pcd, uint32_t epnum) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dwc_otg_dev_in_ep_regs_t *ep_regs; ++ dtxfsts_data_t txstatus = {.d32 = 0 }; ++ dwc_otg_pcd_ep_t *ep = 0; ++ uint32_t len = 0; ++ int dwords; ++ ++ ep = get_in_ep(pcd, epnum); ++ ++ DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %d \n", epnum); ++ ++ ep_regs = core_if->dev_if->in_ep_regs[epnum]; ++ ++ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; ++ ++ if (len > ep->dwc_ep.maxpacket) { ++ len = ep->dwc_ep.maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ ++ /* While there is space in the queue and space in the FIFO and ++ * More data to tranfer, Write packets to the Tx FIFO */ ++ txstatus.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32); ++ ++ while (txstatus.b.txfspcavail > dwords && ++ ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len && ++ ep->dwc_ep.xfer_len != 0) { ++ /* Write the FIFO */ ++ dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0); ++ ++ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; ++ if (len > ep->dwc_ep.maxpacket) { ++ len = ep->dwc_ep.maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ txstatus.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", epnum, ++ txstatus.d32); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, ++ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts)); ++ ++ return 1; ++} ++ ++/** ++ * This function is called when the Device is disconnected. It stops ++ * any active requests and informs the Gadget driver of the ++ * disconnect. ++ */ ++void dwc_otg_pcd_stop(dwc_otg_pcd_t * pcd) ++{ ++ int i, num_in_eps, num_out_eps; ++ dwc_otg_pcd_ep_t *ep; ++ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_SPINLOCK(pcd->lock); ++ ++ num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps; ++ num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s() \n", __func__); ++ /* don't disconnect drivers more than once */ ++ if (pcd->ep0state == EP0_DISCONNECT) { ++ DWC_DEBUGPL(DBG_ANY, "%s() Already Disconnected\n", __func__); ++ DWC_SPINUNLOCK(pcd->lock); ++ return; ++ } ++ pcd->ep0state = EP0_DISCONNECT; ++ ++ /* Reset the OTG state. */ ++ dwc_otg_pcd_update_otg(pcd, 1); ++ ++ /* Disable the NP Tx Fifo Empty Interrupt. */ ++ intr_mask.b.nptxfempty = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Flush the FIFOs */ ++ /**@todo NGS Flush Periodic FIFOs */ ++ dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), 0x10); ++ dwc_otg_flush_rx_fifo(GET_CORE_IF(pcd)); ++ ++ /* prevent new request submissions, kill any outstanding requests */ ++ ep = &pcd->ep0; ++ dwc_otg_request_nuke(ep); ++ /* prevent new request submissions, kill any outstanding requests */ ++ for (i = 0; i < num_in_eps; i++) { ++ dwc_otg_pcd_ep_t *ep = &pcd->in_ep[i]; ++ dwc_otg_request_nuke(ep); ++ } ++ /* prevent new request submissions, kill any outstanding requests */ ++ for (i = 0; i < num_out_eps; i++) { ++ dwc_otg_pcd_ep_t *ep = &pcd->out_ep[i]; ++ dwc_otg_request_nuke(ep); ++ } ++ ++ /* report disconnect; the driver is already quiesced */ ++ if (pcd->fops->disconnect) { ++ DWC_SPINUNLOCK(pcd->lock); ++ pcd->fops->disconnect(pcd); ++ DWC_SPINLOCK(pcd->lock); ++ } ++ DWC_SPINUNLOCK(pcd->lock); ++} ++ ++/** ++ * This interrupt indicates that ... ++ */ ++int32_t dwc_otg_pcd_handle_i2c_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "i2cintr"); ++ intr_mask.b.i2cintr = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.i2cintr = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that ... ++ */ ++int32_t dwc_otg_pcd_handle_early_suspend_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintsts_data_t gintsts; ++#if defined(VERBOSE) ++ DWC_PRINTF("Early Suspend Detected\n"); ++#endif ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.erlysuspend = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ return 1; ++} ++ ++/** ++ * This function configures EPO to receive SETUP packets. ++ * ++ * @todo NGS: Update the comments from the HW FS. ++ * ++ * -# Program the following fields in the endpoint specific registers ++ * for Control OUT EP 0, in order to receive a setup packet ++ * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back ++ * setup packets) ++ * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back ++ * to back setup packets) ++ * - In DMA mode, DOEPDMA0 Register with a memory address to ++ * store any setup packets received ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param pcd Programming view of the PCD. ++ */ ++static inline void ep0_out_start(dwc_otg_core_if_t * core_if, ++ dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ deptsiz0_data_t doeptsize0 = {.d32 = 0 }; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ depctl_data_t doepctl = {.d32 = 0 }; ++ ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, "%s() doepctl0=%0x\n", __func__, ++ DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl)); ++#endif ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { ++ doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl); ++ if (doepctl.b.epena) { ++ return; ++ } ++ } ++ ++ doeptsize0.b.supcnt = 3; ++ doeptsize0.b.pktcnt = 1; ++ doeptsize0.b.xfersize = 8 * 3; ++ ++ if (core_if->dma_enable) { ++ if (!core_if->dma_desc_enable) { ++ /** put here as for Hermes mode deptisz register should not be written */ ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doeptsiz, ++ doeptsize0.d32); ++ ++ /** @todo dma needs to handle multiple setup packets (up to 3) */ ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepdma, ++ pcd->setup_pkt_dma_handle); ++ } else { ++ dev_if->setup_desc_index = ++ (dev_if->setup_desc_index + 1) & 1; ++ dma_desc = ++ dev_if->setup_desc_addr[dev_if->setup_desc_index]; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { ++ dma_desc->status.b.sr = 0; ++ dma_desc->status.b.mtrf = 0; ++ } ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.bytes = pcd->ep0.dwc_ep.maxpacket; ++ dma_desc->buf = pcd->setup_pkt_dma_handle; ++ dma_desc->status.b.sts = 0; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DOEPDMA0 Register write */ ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepdma, ++ dev_if->dma_setup_desc_addr ++ [dev_if->setup_desc_index]); ++ } ++ ++ } else { ++ /** put here as for Hermes mode deptisz register should not be written */ ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doeptsiz, ++ doeptsize0.d32); ++ } ++ ++ /** DOEPCTL0 Register write cnak will be set after setup interrupt */ ++ doepctl.d32 = 0; ++ doepctl.b.epena = 1; ++ if (core_if->snpsid <= OTG_CORE_REV_2_94a) { ++ doepctl.b.cnak = 1; ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32); ++ } else { ++ DWC_MODIFY_REG32(&dev_if->out_ep_regs[0]->doepctl, 0, doepctl.d32); ++ } ++ ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, "doepctl0=%0x\n", ++ DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl)); ++ DWC_DEBUGPL(DBG_PCDV, "diepctl0=%0x\n", ++ DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl)); ++#endif ++} ++ ++/** ++ * This interrupt occurs when a USB Reset is detected. When the USB ++ * Reset Interrupt occurs the device state is set to DEFAULT and the ++ * EP0 state is set to IDLE. ++ * -# Set the NAK bit for all OUT endpoints (DOEPCTLn.SNAK = 1) ++ * -# Unmask the following interrupt bits ++ * - DAINTMSK.INEP0 = 1 (Control 0 IN endpoint) ++ * - DAINTMSK.OUTEP0 = 1 (Control 0 OUT endpoint) ++ * - DOEPMSK.SETUP = 1 ++ * - DOEPMSK.XferCompl = 1 ++ * - DIEPMSK.XferCompl = 1 ++ * - DIEPMSK.TimeOut = 1 ++ * -# Program the following fields in the endpoint specific registers ++ * for Control OUT EP 0, in order to receive a setup packet ++ * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back ++ * setup packets) ++ * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back ++ * to back setup packets) ++ * - In DMA mode, DOEPDMA0 Register with a memory address to ++ * store any setup packets received ++ * At this point, all the required initialization, except for enabling ++ * the control 0 OUT endpoint is done, for receiving SETUP packets. ++ */ ++int32_t dwc_otg_pcd_handle_usb_reset_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ depctl_data_t doepctl = {.d32 = 0 }; ++ depctl_data_t diepctl = {.d32 = 0 }; ++ daint_data_t daintmsk = {.d32 = 0 }; ++ doepmsk_data_t doepmsk = {.d32 = 0 }; ++ diepmsk_data_t diepmsk = {.d32 = 0 }; ++ dcfg_data_t dcfg = {.d32 = 0 }; ++ grstctl_t resetctl = {.d32 = 0 }; ++ dctl_data_t dctl = {.d32 = 0 }; ++ int i = 0; ++ gintsts_data_t gintsts; ++ pcgcctl_data_t power = {.d32 = 0 }; ++ ++ power.d32 = DWC_READ_REG32(core_if->pcgcctl); ++ if (power.b.stoppclk) { ++ power.d32 = 0; ++ power.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0); ++ ++ power.b.pwrclmp = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0); ++ ++ power.b.rstpdwnmodule = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0); ++ } ++ ++ core_if->lx_state = DWC_OTG_L0; ++ ++ DWC_PRINTF("USB RESET\n"); ++#ifdef DWC_EN_ISOC ++ for (i = 1; i < 16; ++i) { ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ ep = get_in_ep(pcd, i); ++ if (ep != 0) { ++ dwc_ep = &ep->dwc_ep; ++ dwc_ep->next_frame = 0xffffffff; ++ } ++ } ++#endif /* DWC_EN_ISOC */ ++ ++ /* reset the HNP settings */ ++ dwc_otg_pcd_update_otg(pcd, 1); ++ ++ /* Clear the Remote Wakeup Signalling */ ++ dctl.b.rmtwkupsig = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0); ++ ++ /* Set NAK for all OUT EPs */ ++ doepctl.b.snak = 1; ++ for (i = 0; i <= dev_if->num_out_eps; i++) { ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, doepctl.d32); ++ } ++ ++ /* Flush the NP Tx FIFO */ ++ dwc_otg_flush_tx_fifo(core_if, 0x10); ++ /* Flush the Learning Queue */ ++ resetctl.b.intknqflsh = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32); ++ ++ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) { ++ core_if->start_predict = 0; ++ for (i = 0; i<= core_if->dev_if->num_in_eps; ++i) { ++ core_if->nextep_seq[i] = 0xff; // 0xff - EP not active ++ } ++ core_if->nextep_seq[0] = 0; ++ core_if->first_in_nextep_seq = 0; ++ diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl); ++ diepctl.b.nextep = 0; ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32); ++ ++ /* Update IN Endpoint Mismatch Count by active IN NP EP count + 1 */ ++ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); ++ dcfg.b.epmscnt = 2; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "%s first_in_nextep_seq= %2d; nextep_seq[]:\n", ++ __func__, core_if->first_in_nextep_seq); ++ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { ++ DWC_DEBUGPL(DBG_PCDV, "%2d\n", core_if->nextep_seq[i]); ++ } ++ } ++ ++ if (core_if->multiproc_int_enable) { ++ daintmsk.b.inep0 = 1; ++ daintmsk.b.outep0 = 1; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->deachintmsk, ++ daintmsk.d32); ++ ++ doepmsk.b.setup = 1; ++ doepmsk.b.xfercompl = 1; ++ doepmsk.b.ahberr = 1; ++ doepmsk.b.epdisabled = 1; ++ ++ if ((core_if->dma_desc_enable) || ++ (core_if->dma_enable ++ && core_if->snpsid >= OTG_CORE_REV_3_00a)) { ++ doepmsk.b.stsphsercvd = 1; ++ } ++ if (core_if->dma_desc_enable) ++ doepmsk.b.bna = 1; ++/* ++ doepmsk.b.babble = 1; ++ doepmsk.b.nyet = 1; ++ ++ if (core_if->dma_enable) { ++ doepmsk.b.nak = 1; ++ } ++*/ ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->doepeachintmsk[0], ++ doepmsk.d32); ++ ++ diepmsk.b.xfercompl = 1; ++ diepmsk.b.timeout = 1; ++ diepmsk.b.epdisabled = 1; ++ diepmsk.b.ahberr = 1; ++ diepmsk.b.intknepmis = 1; ++ if (!core_if->en_multiple_tx_fifo && core_if->dma_enable) ++ diepmsk.b.intknepmis = 0; ++ ++/* if (core_if->dma_desc_enable) { ++ diepmsk.b.bna = 1; ++ } ++*/ ++/* ++ if (core_if->dma_enable) { ++ diepmsk.b.nak = 1; ++ } ++*/ ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->diepeachintmsk[0], ++ diepmsk.d32); ++ } else { ++ daintmsk.b.inep0 = 1; ++ daintmsk.b.outep0 = 1; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->daintmsk, ++ daintmsk.d32); ++ ++ doepmsk.b.setup = 1; ++ doepmsk.b.xfercompl = 1; ++ doepmsk.b.ahberr = 1; ++ doepmsk.b.epdisabled = 1; ++ ++ if ((core_if->dma_desc_enable) || ++ (core_if->dma_enable ++ && core_if->snpsid >= OTG_CORE_REV_3_00a)) { ++ doepmsk.b.stsphsercvd = 1; ++ } ++ if (core_if->dma_desc_enable) ++ doepmsk.b.bna = 1; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->doepmsk, doepmsk.d32); ++ ++ diepmsk.b.xfercompl = 1; ++ diepmsk.b.timeout = 1; ++ diepmsk.b.epdisabled = 1; ++ diepmsk.b.ahberr = 1; ++ if (!core_if->en_multiple_tx_fifo && core_if->dma_enable) ++ diepmsk.b.intknepmis = 0; ++/* ++ if (core_if->dma_desc_enable) { ++ diepmsk.b.bna = 1; ++ } ++*/ ++ ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32); ++ } ++ ++ /* Reset Device Address */ ++ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); ++ dcfg.b.devaddr = 0; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); ++ ++ /* setup EP0 to receive SETUP packets */ ++ if (core_if->snpsid <= OTG_CORE_REV_2_94a) ++ ep0_out_start(core_if, pcd); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.usbreset = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * Get the device speed from the device status register and convert it ++ * to USB speed constant. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static int get_device_speed(dwc_otg_core_if_t * core_if) ++{ ++ dsts_data_t dsts; ++ int speed = 0; ++ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ switch (dsts.b.enumspd) { ++ case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ: ++ speed = USB_SPEED_HIGH; ++ break; ++ case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ: ++ case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ: ++ speed = USB_SPEED_FULL; ++ break; ++ ++ case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ: ++ speed = USB_SPEED_LOW; ++ break; ++ } ++ ++ return speed; ++} ++ ++/** ++ * Read the device status register and set the device speed in the ++ * data structure. ++ * Set up EP0 to receive SETUP packets by calling dwc_ep0_activate. ++ */ ++int32_t dwc_otg_pcd_handle_enum_done_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ gintsts_data_t gintsts; ++ gusbcfg_data_t gusbcfg; ++ dwc_otg_core_global_regs_t *global_regs = ++ GET_CORE_IF(pcd)->core_global_regs; ++ uint8_t utmi16b, utmi8b; ++ int speed; ++ DWC_DEBUGPL(DBG_PCD, "SPEED ENUM\n"); ++ ++ if (GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_2_60a) { ++ utmi16b = 6; //vahrama old value was 6; ++ utmi8b = 9; ++ } else { ++ utmi16b = 4; ++ utmi8b = 8; ++ } ++ dwc_otg_ep0_activate(GET_CORE_IF(pcd), &ep0->dwc_ep); ++ if (GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_3_00a) { ++ ep0_out_start(GET_CORE_IF(pcd), pcd); ++ } ++ ++#ifdef DEBUG_EP0 ++ print_ep0_state(pcd); ++#endif ++ ++ if (pcd->ep0state == EP0_DISCONNECT) { ++ pcd->ep0state = EP0_IDLE; ++ } else if (pcd->ep0state == EP0_STALL) { ++ pcd->ep0state = EP0_IDLE; ++ } ++ ++ pcd->ep0state = EP0_IDLE; ++ ++ ep0->stopped = 0; ++ ++ speed = get_device_speed(GET_CORE_IF(pcd)); ++ pcd->fops->connect(pcd, speed); ++ ++ /* Set USB turnaround time based on device speed and PHY interface. */ ++ gusbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); ++ if (speed == USB_SPEED_HIGH) { ++ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == ++ DWC_HWCFG2_HS_PHY_TYPE_ULPI) { ++ /* ULPI interface */ ++ gusbcfg.b.usbtrdtim = 9; ++ } ++ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == ++ DWC_HWCFG2_HS_PHY_TYPE_UTMI) { ++ /* UTMI+ interface */ ++ if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 0) { ++ gusbcfg.b.usbtrdtim = utmi8b; ++ } else if (GET_CORE_IF(pcd)->hwcfg4. ++ b.utmi_phy_data_width == 1) { ++ gusbcfg.b.usbtrdtim = utmi16b; ++ } else if (GET_CORE_IF(pcd)-> ++ core_params->phy_utmi_width == 8) { ++ gusbcfg.b.usbtrdtim = utmi8b; ++ } else { ++ gusbcfg.b.usbtrdtim = utmi16b; ++ } ++ } ++ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == ++ DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI) { ++ /* UTMI+ OR ULPI interface */ ++ if (gusbcfg.b.ulpi_utmi_sel == 1) { ++ /* ULPI interface */ ++ gusbcfg.b.usbtrdtim = 9; ++ } else { ++ /* UTMI+ interface */ ++ if (GET_CORE_IF(pcd)-> ++ core_params->phy_utmi_width == 16) { ++ gusbcfg.b.usbtrdtim = utmi16b; ++ } else { ++ gusbcfg.b.usbtrdtim = utmi8b; ++ } ++ } ++ } ++ } else { ++ /* Full or low speed */ ++ gusbcfg.b.usbtrdtim = 9; ++ } ++ DWC_WRITE_REG32(&global_regs->gusbcfg, gusbcfg.d32); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.enumdone = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that the ISO OUT Packet was dropped due to ++ * Rx FIFO full or Rx Status Queue Full. If this interrupt occurs ++ * read all the data from the Rx FIFO. ++ */ ++int32_t dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ ++ DWC_WARN("INTERRUPT Handler not implemented for %s\n", ++ "ISOC Out Dropped"); ++ ++ intr_mask.b.isooutdrop = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.isooutdrop = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates the end of the portion of the micro-frame ++ * for periodic transactions. If there is a periodic transaction for ++ * the next frame, load the packets into the EP periodic Tx FIFO. ++ */ ++int32_t dwc_otg_pcd_handle_end_periodic_frame_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "EOP"); ++ ++ intr_mask.b.eopframe = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.eopframe = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that EP of the packet on the top of the ++ * non-periodic Tx FIFO does not match EP of the IN Token received. ++ * ++ * The "Device IN Token Queue" Registers are read to determine the ++ * order the IN Tokens have been received. The non-periodic Tx FIFO ++ * is flushed, so it can be reloaded in the order seen in the IN Token ++ * Queue. ++ */ ++int32_t dwc_otg_pcd_handle_ep_mismatch_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintsts_data_t gintsts; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dctl_data_t dctl; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ if (!core_if->en_multiple_tx_fifo && core_if->dma_enable) { ++ core_if->start_predict = 1; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if); ++ ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ if (!gintsts.b.ginnakeff) { ++ /* Disable EP Mismatch interrupt */ ++ intr_mask.d32 = 0; ++ intr_mask.b.epmismatch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0); ++ /* Enable the Global IN NAK Effective Interrupt */ ++ intr_mask.d32 = 0; ++ intr_mask.b.ginnakeff = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, intr_mask.d32); ++ /* Set the global non-periodic IN NAK handshake */ ++ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); ++ dctl.b.sgnpinnak = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32); ++ } else { ++ DWC_PRINTF("gintsts.b.ginnakeff = 1! dctl.b.sgnpinnak not set\n"); ++ } ++ /* Disabling of all EP's will be done in dwc_otg_pcd_handle_in_nak_effective() ++ * handler after Global IN NAK Effective interrupt will be asserted */ ++ } ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.epmismatch = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This interrupt is valid only in DMA mode. This interrupt indicates that the ++ * core has stopped fetching data for IN endpoints due to the unavailability of ++ * TxFIFO space or Request Queue space. This interrupt is used by the ++ * application for an endpoint mismatch algorithm. ++ * ++ * @param pcd The PCD ++ */ ++int32_t dwc_otg_pcd_handle_ep_fetsusp_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintsts_data_t gintsts; ++ gintmsk_data_t gintmsk_data; ++ dctl_data_t dctl; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if); ++ ++ /* Clear the global non-periodic IN NAK handshake */ ++ dctl.d32 = 0; ++ dctl.b.cgnpinnak = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); ++ ++ /* Mask GINTSTS.FETSUSP interrupt */ ++ gintmsk_data.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); ++ gintmsk_data.b.fetsusp = 0; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk_data.d32); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.fetsusp = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++/** ++ * This funcion stalls EP0. ++ */ ++static inline void ep0_do_stall(dwc_otg_pcd_t * pcd, const int err_val) ++{ ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ usb_device_request_t *ctrl = &pcd->setup_pkt->req; ++ DWC_WARN("req %02x.%02x protocol STALL; err %d\n", ++ ctrl->bmRequestType, ctrl->bRequest, err_val); ++ ++ ep0->dwc_ep.is_in = 1; ++ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep0->dwc_ep); ++ pcd->ep0.stopped = 1; ++ pcd->ep0state = EP0_IDLE; ++ ep0_out_start(GET_CORE_IF(pcd), pcd); ++} ++ ++/** ++ * This functions delegates the setup command to the gadget driver. ++ */ ++static inline void do_gadget_setup(dwc_otg_pcd_t * pcd, ++ usb_device_request_t * ctrl) ++{ ++ int ret = 0; ++ DWC_SPINUNLOCK(pcd->lock); ++ ret = pcd->fops->setup(pcd, (uint8_t *) ctrl); ++ DWC_SPINLOCK(pcd->lock); ++ if (ret < 0) { ++ ep0_do_stall(pcd, ret); ++ } ++ ++ /** @todo This is a g_file_storage gadget driver specific ++ * workaround: a DELAYED_STATUS result from the fsg_setup ++ * routine will result in the gadget queueing a EP0 IN status ++ * phase for a two-stage control transfer. Exactly the same as ++ * a SET_CONFIGURATION/SET_INTERFACE except that this is a class ++ * specific request. Need a generic way to know when the gadget ++ * driver will queue the status phase. Can we assume when we ++ * call the gadget driver setup() function that it will always ++ * queue and require the following flag? Need to look into ++ * this. ++ */ ++ ++ if (ret == 256 + 999) { ++ pcd->request_config = 1; ++ } ++} ++ ++#ifdef DWC_UTE_CFI ++/** ++ * This functions delegates the CFI setup commands to the gadget driver. ++ * This function will return a negative value to indicate a failure. ++ */ ++static inline int cfi_gadget_setup(dwc_otg_pcd_t * pcd, ++ struct cfi_usb_ctrlrequest *ctrl_req) ++{ ++ int ret = 0; ++ ++ if (pcd->fops && pcd->fops->cfi_setup) { ++ DWC_SPINUNLOCK(pcd->lock); ++ ret = pcd->fops->cfi_setup(pcd, ctrl_req); ++ DWC_SPINLOCK(pcd->lock); ++ if (ret < 0) { ++ ep0_do_stall(pcd, ret); ++ return ret; ++ } ++ } ++ ++ return ret; ++} ++#endif ++ ++/** ++ * This function starts the Zero-Length Packet for the IN status phase ++ * of a 2 stage control transfer. ++ */ ++static inline void do_setup_in_status_phase(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ if (pcd->ep0state == EP0_STALL) { ++ return; ++ } ++ ++ pcd->ep0state = EP0_IN_STATUS_PHASE; ++ ++ /* Prepare for more SETUP Packets */ ++ DWC_DEBUGPL(DBG_PCD, "EP0 IN ZLP\n"); ++ if ((GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_3_00a) ++ && (pcd->core_if->dma_desc_enable) ++ && (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len)) { ++ DWC_DEBUGPL(DBG_PCDV, ++ "Data terminated wait next packet in out_desc_addr\n"); ++ pcd->backup_buf = phys_to_virt(ep0->dwc_ep.dma_addr); ++ pcd->data_terminated = 1; ++ } ++ ep0->dwc_ep.xfer_len = 0; ++ ep0->dwc_ep.xfer_count = 0; ++ ep0->dwc_ep.is_in = 1; ++ ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle; ++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep); ++ ++ /* Prepare for more SETUP Packets */ ++ //ep0_out_start(GET_CORE_IF(pcd), pcd); ++} ++ ++/** ++ * This function starts the Zero-Length Packet for the OUT status phase ++ * of a 2 stage control transfer. ++ */ ++static inline void do_setup_out_status_phase(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ if (pcd->ep0state == EP0_STALL) { ++ DWC_DEBUGPL(DBG_PCD, "EP0 STALLED\n"); ++ return; ++ } ++ pcd->ep0state = EP0_OUT_STATUS_PHASE; ++ ++ DWC_DEBUGPL(DBG_PCD, "EP0 OUT ZLP\n"); ++ ep0->dwc_ep.xfer_len = 0; ++ ep0->dwc_ep.xfer_count = 0; ++ ep0->dwc_ep.is_in = 0; ++ ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle; ++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep); ++ ++ /* Prepare for more SETUP Packets */ ++ if (GET_CORE_IF(pcd)->dma_enable == 0) { ++ ep0_out_start(GET_CORE_IF(pcd), pcd); ++ } ++} ++ ++/** ++ * Clear the EP halt (STALL) and if pending requests start the ++ * transfer. ++ */ ++static inline void pcd_clear_halt(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep) ++{ ++ if (ep->dwc_ep.stall_clear_flag == 0) ++ dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep); ++ ++ /* Reactive the EP */ ++ dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep); ++ if (ep->stopped) { ++ ep->stopped = 0; ++ /* If there is a request in the EP queue start it */ ++ ++ /** @todo FIXME: this causes an EP mismatch in DMA mode. ++ * epmismatch not yet implemented. */ ++ ++ /* ++ * Above fixme is solved by implmenting a tasklet to call the ++ * start_next_request(), outside of interrupt context at some ++ * time after the current time, after a clear-halt setup packet. ++ * Still need to implement ep mismatch in the future if a gadget ++ * ever uses more than one endpoint at once ++ */ ++ ep->queue_sof = 1; ++ DWC_TASK_SCHEDULE(pcd->start_xfer_tasklet); ++ } ++ /* Start Control Status Phase */ ++ do_setup_in_status_phase(pcd); ++} ++ ++/** ++ * This function is called when the SET_FEATURE TEST_MODE Setup packet ++ * is sent from the host. The Device Control register is written with ++ * the Test Mode bits set to the specified Test Mode. This is done as ++ * a tasklet so that the "Status" phase of the control transfer ++ * completes before transmitting the TEST packets. ++ * ++ * @todo This has not been tested since the tasklet struct was put ++ * into the PCD struct! ++ * ++ */ ++void do_test_mode(void *data) ++{ ++ dctl_data_t dctl; ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) data; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ int test_mode = pcd->test_mode; ++ ++// DWC_WARN("%s() has not been tested since being rewritten!\n", __func__); ++ ++ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); ++ switch (test_mode) { ++ case 1: // TEST_J ++ dctl.b.tstctl = 1; ++ break; ++ ++ case 2: // TEST_K ++ dctl.b.tstctl = 2; ++ break; ++ ++ case 3: // TEST_SE0_NAK ++ dctl.b.tstctl = 3; ++ break; ++ ++ case 4: // TEST_PACKET ++ dctl.b.tstctl = 4; ++ break; ++ ++ case 5: // TEST_FORCE_ENABLE ++ dctl.b.tstctl = 5; ++ break; ++ } ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32); ++} ++ ++/** ++ * This function process the GET_STATUS Setup Commands. ++ */ ++static inline void do_get_status(dwc_otg_pcd_t * pcd) ++{ ++ usb_device_request_t ctrl = pcd->setup_pkt->req; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ uint16_t *status = pcd->status_buf; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, ++ "GET_STATUS %02x.%02x v%04x i%04x l%04x\n", ++ ctrl.bmRequestType, ctrl.bRequest, ++ UGETW(ctrl.wValue), UGETW(ctrl.wIndex), ++ UGETW(ctrl.wLength)); ++#endif ++ ++ switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) { ++ case UT_DEVICE: ++ if(UGETW(ctrl.wIndex) == 0xF000) { /* OTG Status selector */ ++ DWC_PRINTF("wIndex - %d\n", UGETW(ctrl.wIndex)); ++ DWC_PRINTF("OTG VERSION - %d\n", core_if->otg_ver); ++ DWC_PRINTF("OTG CAP - %d, %d\n", ++ core_if->core_params->otg_cap, ++ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE); ++ if (core_if->otg_ver == 1 ++ && core_if->core_params->otg_cap == ++ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { ++ uint8_t *otgsts = (uint8_t*)pcd->status_buf; ++ *otgsts = (core_if->otg_sts & 0x1); ++ pcd->ep0_pending = 1; ++ ep0->dwc_ep.start_xfer_buff = ++ (uint8_t *) otgsts; ++ ep0->dwc_ep.xfer_buff = (uint8_t *) otgsts; ++ ep0->dwc_ep.dma_addr = ++ pcd->status_buf_dma_handle; ++ ep0->dwc_ep.xfer_len = 1; ++ ep0->dwc_ep.xfer_count = 0; ++ ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len; ++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), ++ &ep0->dwc_ep); ++ return; ++ } else { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ break; ++ } else { ++ *status = 0x1; /* Self powered */ ++ *status |= pcd->remote_wakeup_enable << 1; ++ break; ++ } ++ case UT_INTERFACE: ++ *status = 0; ++ break; ++ ++ case UT_ENDPOINT: ++ ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex)); ++ if (ep == 0 || UGETW(ctrl.wLength) > 2) { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ /** @todo check for EP stall */ ++ *status = ep->stopped; ++ break; ++ } ++ pcd->ep0_pending = 1; ++ ep0->dwc_ep.start_xfer_buff = (uint8_t *) status; ++ ep0->dwc_ep.xfer_buff = (uint8_t *) status; ++ ep0->dwc_ep.dma_addr = pcd->status_buf_dma_handle; ++ ep0->dwc_ep.xfer_len = 2; ++ ep0->dwc_ep.xfer_count = 0; ++ ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len; ++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep); ++} ++ ++/** ++ * This function process the SET_FEATURE Setup Commands. ++ */ ++static inline void do_set_feature(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ usb_device_request_t ctrl = pcd->setup_pkt->req; ++ dwc_otg_pcd_ep_t *ep = 0; ++ int32_t otg_cap_param = core_if->core_params->otg_cap; ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_PCD, "SET_FEATURE:%02x.%02x v%04x i%04x l%04x\n", ++ ctrl.bmRequestType, ctrl.bRequest, ++ UGETW(ctrl.wValue), UGETW(ctrl.wIndex), ++ UGETW(ctrl.wLength)); ++ DWC_DEBUGPL(DBG_PCD, "otg_cap=%d\n", otg_cap_param); ++ ++ switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) { ++ case UT_DEVICE: ++ switch (UGETW(ctrl.wValue)) { ++ case UF_DEVICE_REMOTE_WAKEUP: ++ pcd->remote_wakeup_enable = 1; ++ break; ++ ++ case UF_TEST_MODE: ++ /* Setup the Test Mode tasklet to do the Test ++ * Packet generation after the SETUP Status ++ * phase has completed. */ ++ ++ /** @todo This has not been tested since the ++ * tasklet struct was put into the PCD ++ * struct! */ ++ pcd->test_mode = UGETW(ctrl.wIndex) >> 8; ++ DWC_TASK_SCHEDULE(pcd->test_mode_tasklet); ++ break; ++ ++ case UF_DEVICE_B_HNP_ENABLE: ++ DWC_DEBUGPL(DBG_PCDV, ++ "SET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n"); ++ ++ /* dev may initiate HNP */ ++ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { ++ pcd->b_hnp_enable = 1; ++ dwc_otg_pcd_update_otg(pcd, 0); ++ DWC_DEBUGPL(DBG_PCD, "Request B HNP\n"); ++ /**@todo Is the gotgctl.devhnpen cleared ++ * by a USB Reset? */ ++ gotgctl.b.devhnpen = 1; ++ gotgctl.b.hnpreq = 1; ++ DWC_WRITE_REG32(&global_regs->gotgctl, ++ gotgctl.d32); ++ } else { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ break; ++ ++ case UF_DEVICE_A_HNP_SUPPORT: ++ /* RH port supports HNP */ ++ DWC_DEBUGPL(DBG_PCDV, ++ "SET_FEATURE: USB_DEVICE_A_HNP_SUPPORT\n"); ++ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { ++ pcd->a_hnp_support = 1; ++ dwc_otg_pcd_update_otg(pcd, 0); ++ } else { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ break; ++ ++ case UF_DEVICE_A_ALT_HNP_SUPPORT: ++ /* other RH port does */ ++ DWC_DEBUGPL(DBG_PCDV, ++ "SET_FEATURE: USB_DEVICE_A_ALT_HNP_SUPPORT\n"); ++ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { ++ pcd->a_alt_hnp_support = 1; ++ dwc_otg_pcd_update_otg(pcd, 0); ++ } else { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ break; ++ ++ default: ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ ++ } ++ do_setup_in_status_phase(pcd); ++ break; ++ ++ case UT_INTERFACE: ++ do_gadget_setup(pcd, &ctrl); ++ break; ++ ++ case UT_ENDPOINT: ++ if (UGETW(ctrl.wValue) == UF_ENDPOINT_HALT) { ++ ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex)); ++ if (ep == 0) { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ ep->stopped = 1; ++ dwc_otg_ep_set_stall(core_if, &ep->dwc_ep); ++ } ++ do_setup_in_status_phase(pcd); ++ break; ++ } ++} ++ ++/** ++ * This function process the CLEAR_FEATURE Setup Commands. ++ */ ++static inline void do_clear_feature(dwc_otg_pcd_t * pcd) ++{ ++ usb_device_request_t ctrl = pcd->setup_pkt->req; ++ dwc_otg_pcd_ep_t *ep = 0; ++ ++ DWC_DEBUGPL(DBG_PCD, ++ "CLEAR_FEATURE:%02x.%02x v%04x i%04x l%04x\n", ++ ctrl.bmRequestType, ctrl.bRequest, ++ UGETW(ctrl.wValue), UGETW(ctrl.wIndex), ++ UGETW(ctrl.wLength)); ++ ++ switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) { ++ case UT_DEVICE: ++ switch (UGETW(ctrl.wValue)) { ++ case UF_DEVICE_REMOTE_WAKEUP: ++ pcd->remote_wakeup_enable = 0; ++ break; ++ ++ case UF_TEST_MODE: ++ /** @todo Add CLEAR_FEATURE for TEST modes. */ ++ break; ++ ++ default: ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ do_setup_in_status_phase(pcd); ++ break; ++ ++ case UT_ENDPOINT: ++ ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex)); ++ if (ep == 0) { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ ++ pcd_clear_halt(pcd, ep); ++ ++ break; ++ } ++} ++ ++/** ++ * This function process the SET_ADDRESS Setup Commands. ++ */ ++static inline void do_set_address(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; ++ usb_device_request_t ctrl = pcd->setup_pkt->req; ++ ++ if (ctrl.bmRequestType == UT_DEVICE) { ++ dcfg_data_t dcfg = {.d32 = 0 }; ++ ++#ifdef DEBUG_EP0 ++// DWC_DEBUGPL(DBG_PCDV, "SET_ADDRESS:%d\n", ctrl.wValue); ++#endif ++ dcfg.b.devaddr = UGETW(ctrl.wValue); ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dcfg, 0, dcfg.d32); ++ do_setup_in_status_phase(pcd); ++ } ++} ++ ++/** ++ * This function processes SETUP commands. In Linux, the USB Command ++ * processing is done in two places - the first being the PCD and the ++ * second in the Gadget Driver (for example, the File-Backed Storage ++ * Gadget Driver). ++ * ++ * <table> ++ * <tr><td>Command </td><td>Driver </td><td>Description</td></tr> ++ * ++ * <tr><td>GET_STATUS </td><td>PCD </td><td>Command is processed as ++ * defined in chapter 9 of the USB 2.0 Specification chapter 9 ++ * </td></tr> ++ * ++ * <tr><td>CLEAR_FEATURE </td><td>PCD </td><td>The Device and Endpoint ++ * requests are the ENDPOINT_HALT feature is procesed, all others the ++ * interface requests are ignored.</td></tr> ++ * ++ * <tr><td>SET_FEATURE </td><td>PCD </td><td>The Device and Endpoint ++ * requests are processed by the PCD. Interface requests are passed ++ * to the Gadget Driver.</td></tr> ++ * ++ * <tr><td>SET_ADDRESS </td><td>PCD </td><td>Program the DCFG reg, ++ * with device address received </td></tr> ++ * ++ * <tr><td>GET_DESCRIPTOR </td><td>Gadget Driver </td><td>Return the ++ * requested descriptor</td></tr> ++ * ++ * <tr><td>SET_DESCRIPTOR </td><td>Gadget Driver </td><td>Optional - ++ * not implemented by any of the existing Gadget Drivers.</td></tr> ++ * ++ * <tr><td>SET_CONFIGURATION </td><td>Gadget Driver </td><td>Disable ++ * all EPs and enable EPs for new configuration.</td></tr> ++ * ++ * <tr><td>GET_CONFIGURATION </td><td>Gadget Driver </td><td>Return ++ * the current configuration</td></tr> ++ * ++ * <tr><td>SET_INTERFACE </td><td>Gadget Driver </td><td>Disable all ++ * EPs and enable EPs for new configuration.</td></tr> ++ * ++ * <tr><td>GET_INTERFACE </td><td>Gadget Driver </td><td>Return the ++ * current interface.</td></tr> ++ * ++ * <tr><td>SYNC_FRAME </td><td>PCD </td><td>Display debug ++ * message.</td></tr> ++ * </table> ++ * ++ * When the SETUP Phase Done interrupt occurs, the PCD SETUP commands are ++ * processed by pcd_setup. Calling the Function Driver's setup function from ++ * pcd_setup processes the gadget SETUP commands. ++ */ ++static inline void pcd_setup(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ usb_device_request_t ctrl = pcd->setup_pkt->req; ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ ++ deptsiz0_data_t doeptsize0 = {.d32 = 0 }; ++ ++#ifdef DWC_UTE_CFI ++ int retval = 0; ++ struct cfi_usb_ctrlrequest cfi_req; ++#endif ++ ++ doeptsize0.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doeptsiz); ++ ++ /** In BDMA more then 1 setup packet is not supported till 3.00a */ ++ if (core_if->dma_enable && core_if->dma_desc_enable == 0 ++ && (doeptsize0.b.supcnt < 2) ++ && (core_if->snpsid < OTG_CORE_REV_2_94a)) { ++ DWC_ERROR ++ ("\n\n----------- CANNOT handle > 1 setup packet in DMA mode\n\n"); ++ } ++ if ((core_if->snpsid >= OTG_CORE_REV_3_00a) ++ && (core_if->dma_enable == 1) && (core_if->dma_desc_enable == 0)) { ++ ctrl = ++ (pcd->setup_pkt + ++ (3 - doeptsize0.b.supcnt - 1 + ++ ep0->dwc_ep.stp_rollover))->req; ++ } ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, "SETUP %02x.%02x v%04x i%04x l%04x\n", ++ ctrl.bmRequestType, ctrl.bRequest, ++ UGETW(ctrl.wValue), UGETW(ctrl.wIndex), ++ UGETW(ctrl.wLength)); ++#endif ++ ++ /* Clean up the request queue */ ++ dwc_otg_request_nuke(ep0); ++ ep0->stopped = 0; ++ ++ if (ctrl.bmRequestType & UE_DIR_IN) { ++ ep0->dwc_ep.is_in = 1; ++ pcd->ep0state = EP0_IN_DATA_PHASE; ++ } else { ++ ep0->dwc_ep.is_in = 0; ++ pcd->ep0state = EP0_OUT_DATA_PHASE; ++ } ++ ++ if (UGETW(ctrl.wLength) == 0) { ++ ep0->dwc_ep.is_in = 1; ++ pcd->ep0state = EP0_IN_STATUS_PHASE; ++ } ++ ++ if (UT_GET_TYPE(ctrl.bmRequestType) != UT_STANDARD) { ++ ++#ifdef DWC_UTE_CFI ++ DWC_MEMCPY(&cfi_req, &ctrl, sizeof(usb_device_request_t)); ++ ++ //printk(KERN_ALERT "CFI: req_type=0x%02x; req=0x%02x\n", ++ ctrl.bRequestType, ctrl.bRequest); ++ if (UT_GET_TYPE(cfi_req.bRequestType) == UT_VENDOR) { ++ if (cfi_req.bRequest > 0xB0 && cfi_req.bRequest < 0xBF) { ++ retval = cfi_setup(pcd, &cfi_req); ++ if (retval < 0) { ++ ep0_do_stall(pcd, retval); ++ pcd->ep0_pending = 0; ++ return; ++ } ++ ++ /* if need gadget setup then call it and check the retval */ ++ if (pcd->cfi->need_gadget_att) { ++ retval = ++ cfi_gadget_setup(pcd, ++ &pcd-> ++ cfi->ctrl_req); ++ if (retval < 0) { ++ pcd->ep0_pending = 0; ++ return; ++ } ++ } ++ ++ if (pcd->cfi->need_status_in_complete) { ++ do_setup_in_status_phase(pcd); ++ } ++ return; ++ } ++ } ++#endif ++ ++ /* handle non-standard (class/vendor) requests in the gadget driver */ ++ do_gadget_setup(pcd, &ctrl); ++ return; ++ } ++ ++ /** @todo NGS: Handle bad setup packet? */ ++ ++/////////////////////////////////////////// ++//// --- Standard Request handling --- //// ++ ++ switch (ctrl.bRequest) { ++ case UR_GET_STATUS: ++ do_get_status(pcd); ++ break; ++ ++ case UR_CLEAR_FEATURE: ++ do_clear_feature(pcd); ++ break; ++ ++ case UR_SET_FEATURE: ++ do_set_feature(pcd); ++ break; ++ ++ case UR_SET_ADDRESS: ++ do_set_address(pcd); ++ break; ++ ++ case UR_SET_INTERFACE: ++ case UR_SET_CONFIG: ++// _pcd->request_config = 1; /* Configuration changed */ ++ do_gadget_setup(pcd, &ctrl); ++ break; ++ ++ case UR_SYNCH_FRAME: ++ do_gadget_setup(pcd, &ctrl); ++ break; ++ ++ default: ++ /* Call the Gadget Driver's setup functions */ ++ do_gadget_setup(pcd, &ctrl); ++ break; ++ } ++} ++ ++/** ++ * This function completes the ep0 control transfer. ++ */ ++static int32_t ep0_complete_request(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dwc_otg_dev_in_ep_regs_t *in_ep_regs = ++ dev_if->in_ep_regs[ep->dwc_ep.num]; ++#ifdef DEBUG_EP0 ++ dwc_otg_dev_out_ep_regs_t *out_ep_regs = ++ dev_if->out_ep_regs[ep->dwc_ep.num]; ++#endif ++ deptsiz0_data_t deptsiz; ++ dev_dma_desc_sts_t desc_sts; ++ dwc_otg_pcd_request_t *req; ++ int is_last = 0; ++ dwc_otg_pcd_t *pcd = ep->pcd; ++ ++#ifdef DWC_UTE_CFI ++ struct cfi_usb_ctrlrequest *ctrlreq; ++ int retval = -DWC_E_NOT_SUPPORTED; ++#endif ++ ++ desc_sts.b.bytes = 0; ++ ++ if (pcd->ep0_pending && DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ if (ep->dwc_ep.is_in) { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "Do setup OUT status phase\n"); ++#endif ++ do_setup_out_status_phase(pcd); ++ } else { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "Do setup IN status phase\n"); ++#endif ++ ++#ifdef DWC_UTE_CFI ++ ctrlreq = &pcd->cfi->ctrl_req; ++ ++ if (UT_GET_TYPE(ctrlreq->bRequestType) == UT_VENDOR) { ++ if (ctrlreq->bRequest > 0xB0 ++ && ctrlreq->bRequest < 0xBF) { ++ ++ /* Return if the PCD failed to handle the request */ ++ if ((retval = ++ pcd->cfi->ops. ++ ctrl_write_complete(pcd->cfi, ++ pcd)) < 0) { ++ CFI_INFO ++ ("ERROR setting a new value in the PCD(%d)\n", ++ retval); ++ ep0_do_stall(pcd, retval); ++ pcd->ep0_pending = 0; ++ return 0; ++ } ++ ++ /* If the gadget needs to be notified on the request */ ++ if (pcd->cfi->need_gadget_att == 1) { ++ //retval = do_gadget_setup(pcd, &pcd->cfi->ctrl_req); ++ retval = ++ cfi_gadget_setup(pcd, ++ &pcd->cfi-> ++ ctrl_req); ++ ++ /* Return from the function if the gadget failed to process ++ * the request properly - this should never happen !!! ++ */ ++ if (retval < 0) { ++ CFI_INFO ++ ("ERROR setting a new value in the gadget(%d)\n", ++ retval); ++ pcd->ep0_pending = 0; ++ return 0; ++ } ++ } ++ ++ CFI_INFO("%s: RETVAL=%d\n", __func__, ++ retval); ++ /* If we hit here then the PCD and the gadget has properly ++ * handled the request - so send the ZLP IN to the host. ++ */ ++ /* @todo: MAS - decide whether we need to start the setup ++ * stage based on the need_setup value of the cfi object ++ */ ++ do_setup_in_status_phase(pcd); ++ pcd->ep0_pending = 0; ++ return 1; ++ } ++ } ++#endif ++ ++ do_setup_in_status_phase(pcd); ++ } ++ pcd->ep0_pending = 0; ++ return 1; ++ } ++ ++ if (DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ return 0; ++ } ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ ++ if (pcd->ep0state == EP0_OUT_STATUS_PHASE ++ || pcd->ep0state == EP0_IN_STATUS_PHASE) { ++ is_last = 1; ++ } else if (ep->dwc_ep.is_in) { ++ deptsiz.d32 = DWC_READ_REG32(&in_ep_regs->dieptsiz); ++ if (core_if->dma_desc_enable != 0) ++ desc_sts = dev_if->in_desc_addr->status; ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "%d len=%d xfersize=%d pktcnt=%d\n", ++ ep->dwc_ep.num, ep->dwc_ep.xfer_len, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++#endif ++ ++ if (((core_if->dma_desc_enable == 0) ++ && (deptsiz.b.xfersize == 0)) ++ || ((core_if->dma_desc_enable != 0) ++ && (desc_sts.b.bytes == 0))) { ++ req->actual = ep->dwc_ep.xfer_count; ++ /* Is a Zero Len Packet needed? */ ++ if (req->sent_zlp) { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, "Setup Rx ZLP\n"); ++#endif ++ req->sent_zlp = 0; ++ } ++ do_setup_out_status_phase(pcd); ++ } ++ } else { ++ /* ep0-OUT */ ++#ifdef DEBUG_EP0 ++ deptsiz.d32 = DWC_READ_REG32(&out_ep_regs->doeptsiz); ++ DWC_DEBUGPL(DBG_PCDV, "%d len=%d xsize=%d pktcnt=%d\n", ++ ep->dwc_ep.num, ep->dwc_ep.xfer_len, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++#endif ++ req->actual = ep->dwc_ep.xfer_count; ++ ++ /* Is a Zero Len Packet needed? */ ++ if (req->sent_zlp) { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "Setup Tx ZLP\n"); ++#endif ++ req->sent_zlp = 0; ++ } ++ /* For older cores do setup in status phase in Slave/BDMA modes, ++ * starting from 3.00 do that only in slave, and for DMA modes ++ * just re-enable ep 0 OUT here*/ ++ if (core_if->dma_enable == 0 ++ || (core_if->dma_desc_enable == 0 ++ && core_if->snpsid <= OTG_CORE_REV_2_94a)) { ++ do_setup_in_status_phase(pcd); ++ } else if (core_if->snpsid >= OTG_CORE_REV_3_00a) { ++ DWC_DEBUGPL(DBG_PCDV, ++ "Enable out ep before in status phase\n"); ++ ep0_out_start(core_if, pcd); ++ } ++ } ++ ++ /* Complete the request */ ++ if (is_last) { ++ dwc_otg_request_done(ep, req, 0); ++ ep->dwc_ep.start_xfer_buff = 0; ++ ep->dwc_ep.xfer_buff = 0; ++ ep->dwc_ep.xfer_len = 0; ++ return 1; ++ } ++ return 0; ++} ++ ++#ifdef DWC_UTE_CFI ++/** ++ * This function calculates traverses all the CFI DMA descriptors and ++ * and accumulates the bytes that are left to be transfered. ++ * ++ * @return The total bytes left to transfered, or a negative value as failure ++ */ ++static inline int cfi_calc_desc_residue(dwc_otg_pcd_ep_t * ep) ++{ ++ int32_t ret = 0; ++ int i; ++ struct dwc_otg_dma_desc *ddesc = NULL; ++ struct cfi_ep *cfiep; ++ ++ /* See if the pcd_ep has its respective cfi_ep mapped */ ++ cfiep = get_cfi_ep_by_pcd_ep(ep->pcd->cfi, ep); ++ if (!cfiep) { ++ CFI_INFO("%s: Failed to find ep\n", __func__); ++ return -1; ++ } ++ ++ ddesc = ep->dwc_ep.descs; ++ ++ for (i = 0; (i < cfiep->desc_count) && (i < MAX_DMA_DESCS_PER_EP); i++) { ++ ++#if defined(PRINT_CFI_DMA_DESCS) ++ print_desc(ddesc, ep->ep.name, i); ++#endif ++ ret += ddesc->status.b.bytes; ++ ddesc++; ++ } ++ ++ if (ret) ++ CFI_INFO("!!!!!!!!!! WARNING (%s) - residue=%d\n", __func__, ++ ret); ++ ++ return ret; ++} ++#endif ++ ++/** ++ * This function completes the request for the EP. If there are ++ * additional requests for the EP in the queue they will be started. ++ */ ++static void complete_ep(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dwc_otg_dev_in_ep_regs_t *in_ep_regs = ++ dev_if->in_ep_regs[ep->dwc_ep.num]; ++ deptsiz_data_t deptsiz; ++ dev_dma_desc_sts_t desc_sts; ++ dwc_otg_pcd_request_t *req = 0; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ uint32_t byte_count = 0; ++ int is_last = 0; ++ int i; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s() %d-%s\n", __func__, ep->dwc_ep.num, ++ (ep->dwc_ep.is_in ? "IN" : "OUT")); ++ ++ /* Get any pending requests */ ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ if (!req) { ++ DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep); ++ return; ++ } ++ } else { ++ DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep); ++ return; ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "Requests %d\n", ep->pcd->request_pending); ++ ++ if (ep->dwc_ep.is_in) { ++ deptsiz.d32 = DWC_READ_REG32(&in_ep_regs->dieptsiz); ++ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable == 0) { ++ if (deptsiz.b.xfersize == 0 ++ && deptsiz.b.pktcnt == 0) { ++ byte_count = ++ ep->dwc_ep.xfer_len - ++ ep->dwc_ep.xfer_count; ++ ++ ep->dwc_ep.xfer_buff += byte_count; ++ ep->dwc_ep.dma_addr += byte_count; ++ ep->dwc_ep.xfer_count += byte_count; ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "%d-%s len=%d xfersize=%d pktcnt=%d\n", ++ ep->dwc_ep.num, ++ (ep->dwc_ep. ++ is_in ? "IN" : "OUT"), ++ ep->dwc_ep.xfer_len, ++ deptsiz.b.xfersize, ++ deptsiz.b.pktcnt); ++ ++ if (ep->dwc_ep.xfer_len < ++ ep->dwc_ep.total_len) { ++ dwc_otg_ep_start_transfer ++ (core_if, &ep->dwc_ep); ++ } else if (ep->dwc_ep.sent_zlp) { ++ /* ++ * This fragment of code should initiate 0 ++ * length transfer in case if it is queued ++ * a transfer with size divisible to EPs max ++ * packet size and with usb_request zero field ++ * is set, which means that after data is transfered, ++ * it is also should be transfered ++ * a 0 length packet at the end. For Slave and ++ * Buffer DMA modes in this case SW has ++ * to initiate 2 transfers one with transfer size, ++ * and the second with 0 size. For Descriptor ++ * DMA mode SW is able to initiate a transfer, ++ * which will handle all the packets including ++ * the last 0 length. ++ */ ++ ep->dwc_ep.sent_zlp = 0; ++ dwc_otg_ep_start_zl_transfer ++ (core_if, &ep->dwc_ep); ++ } else { ++ is_last = 1; ++ } ++ } else { ++ if (ep->dwc_ep.type == ++ DWC_OTG_EP_TYPE_ISOC) { ++ req->actual = 0; ++ dwc_otg_request_done(ep, req, 0); ++ ++ ep->dwc_ep.start_xfer_buff = 0; ++ ep->dwc_ep.xfer_buff = 0; ++ ep->dwc_ep.xfer_len = 0; ++ ++ /* If there is a request in the queue start it. */ ++ start_next_request(ep); ++ } else ++ DWC_WARN ++ ("Incomplete transfer (%d - %s [siz=%d pkt=%d])\n", ++ ep->dwc_ep.num, ++ (ep->dwc_ep.is_in ? "IN" : "OUT"), ++ deptsiz.b.xfersize, ++ deptsiz.b.pktcnt); ++ } ++ } else { ++ dma_desc = ep->dwc_ep.desc_addr; ++ byte_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ++#ifdef DWC_UTE_CFI ++ CFI_INFO("%s: BUFFER_MODE=%d\n", __func__, ++ ep->dwc_ep.buff_mode); ++ if (ep->dwc_ep.buff_mode != BM_STANDARD) { ++ int residue; ++ ++ residue = cfi_calc_desc_residue(ep); ++ if (residue < 0) ++ return; ++ ++ byte_count = residue; ++ } else { ++#endif ++ for (i = 0; i < ep->dwc_ep.desc_cnt; ++ ++i) { ++ desc_sts = dma_desc->status; ++ byte_count += desc_sts.b.bytes; ++ dma_desc++; ++ } ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ if (byte_count == 0) { ++ ep->dwc_ep.xfer_count = ++ ep->dwc_ep.total_len; ++ is_last = 1; ++ } else { ++ DWC_WARN("Incomplete transfer\n"); ++ } ++ } ++ } else { ++ if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) { ++ DWC_DEBUGPL(DBG_PCDV, ++ "%d-%s len=%d xfersize=%d pktcnt=%d\n", ++ ep->dwc_ep.num, ++ ep->dwc_ep.is_in ? "IN" : "OUT", ++ ep->dwc_ep.xfer_len, ++ deptsiz.b.xfersize, ++ deptsiz.b.pktcnt); ++ ++ /* Check if the whole transfer was completed, ++ * if no, setup transfer for next portion of data ++ */ ++ if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { ++ dwc_otg_ep_start_transfer(core_if, ++ &ep->dwc_ep); ++ } else if (ep->dwc_ep.sent_zlp) { ++ /* ++ * This fragment of code should initiate 0 ++ * length trasfer in case if it is queued ++ * a trasfer with size divisible to EPs max ++ * packet size and with usb_request zero field ++ * is set, which means that after data is transfered, ++ * it is also should be transfered ++ * a 0 length packet at the end. For Slave and ++ * Buffer DMA modes in this case SW has ++ * to initiate 2 transfers one with transfer size, ++ * and the second with 0 size. For Desriptor ++ * DMA mode SW is able to initiate a transfer, ++ * which will handle all the packets including ++ * the last 0 legth. ++ */ ++ ep->dwc_ep.sent_zlp = 0; ++ dwc_otg_ep_start_zl_transfer(core_if, ++ &ep->dwc_ep); ++ } else { ++ is_last = 1; ++ } ++ } else { ++ DWC_WARN ++ ("Incomplete transfer (%d-%s [siz=%d pkt=%d])\n", ++ ep->dwc_ep.num, ++ (ep->dwc_ep.is_in ? "IN" : "OUT"), ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ } ++ } ++ } else { ++ dwc_otg_dev_out_ep_regs_t *out_ep_regs = ++ dev_if->out_ep_regs[ep->dwc_ep.num]; ++ desc_sts.d32 = 0; ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable) { ++ dma_desc = ep->dwc_ep.desc_addr; ++ byte_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ++#ifdef DWC_UTE_CFI ++ CFI_INFO("%s: BUFFER_MODE=%d\n", __func__, ++ ep->dwc_ep.buff_mode); ++ if (ep->dwc_ep.buff_mode != BM_STANDARD) { ++ int residue; ++ residue = cfi_calc_desc_residue(ep); ++ if (residue < 0) ++ return; ++ byte_count = residue; ++ } else { ++#endif ++ ++ for (i = 0; i < ep->dwc_ep.desc_cnt; ++ ++i) { ++ desc_sts = dma_desc->status; ++ byte_count += desc_sts.b.bytes; ++ dma_desc++; ++ } ++ ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ /* Checking for interrupt Out transfers with not ++ * dword aligned mps sizes ++ */ ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_INTR && ++ (ep->dwc_ep.maxpacket%4)) { ++ ep->dwc_ep.xfer_count = ++ ep->dwc_ep.total_len - byte_count; ++ if ((ep->dwc_ep.xfer_len % ++ ep->dwc_ep.maxpacket) ++ && (ep->dwc_ep.xfer_len / ++ ep->dwc_ep.maxpacket < ++ MAX_DMA_DESC_CNT)) ++ ep->dwc_ep.xfer_len -= ++ (ep->dwc_ep.desc_cnt - ++ 1) * ep->dwc_ep.maxpacket + ++ ep->dwc_ep.xfer_len % ++ ep->dwc_ep.maxpacket; ++ else ++ ep->dwc_ep.xfer_len -= ++ ep->dwc_ep.desc_cnt * ++ ep->dwc_ep.maxpacket; ++ if (ep->dwc_ep.xfer_len > 0) { ++ dwc_otg_ep_start_transfer ++ (core_if, &ep->dwc_ep); ++ } else { ++ is_last = 1; ++ } ++ } else { ++ ep->dwc_ep.xfer_count = ++ ep->dwc_ep.total_len - byte_count + ++ ((4 - ++ (ep->dwc_ep. ++ total_len & 0x3)) & 0x3); ++ is_last = 1; ++ } ++ } else { ++ deptsiz.d32 = 0; ++ deptsiz.d32 = ++ DWC_READ_REG32(&out_ep_regs->doeptsiz); ++ ++ byte_count = (ep->dwc_ep.xfer_len - ++ ep->dwc_ep.xfer_count - ++ deptsiz.b.xfersize); ++ ep->dwc_ep.xfer_buff += byte_count; ++ ep->dwc_ep.dma_addr += byte_count; ++ ep->dwc_ep.xfer_count += byte_count; ++ ++ /* Check if the whole transfer was completed, ++ * if no, setup transfer for next portion of data ++ */ ++ if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { ++ dwc_otg_ep_start_transfer(core_if, ++ &ep->dwc_ep); ++ } else if (ep->dwc_ep.sent_zlp) { ++ /* ++ * This fragment of code should initiate 0 ++ * length trasfer in case if it is queued ++ * a trasfer with size divisible to EPs max ++ * packet size and with usb_request zero field ++ * is set, which means that after data is transfered, ++ * it is also should be transfered ++ * a 0 length packet at the end. For Slave and ++ * Buffer DMA modes in this case SW has ++ * to initiate 2 transfers one with transfer size, ++ * and the second with 0 size. For Desriptor ++ * DMA mode SW is able to initiate a transfer, ++ * which will handle all the packets including ++ * the last 0 legth. ++ */ ++ ep->dwc_ep.sent_zlp = 0; ++ dwc_otg_ep_start_zl_transfer(core_if, ++ &ep->dwc_ep); ++ } else { ++ is_last = 1; ++ } ++ } ++ } else { ++ /* Check if the whole transfer was completed, ++ * if no, setup transfer for next portion of data ++ */ ++ if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { ++ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep); ++ } else if (ep->dwc_ep.sent_zlp) { ++ /* ++ * This fragment of code should initiate 0 ++ * length transfer in case if it is queued ++ * a transfer with size divisible to EPs max ++ * packet size and with usb_request zero field ++ * is set, which means that after data is transfered, ++ * it is also should be transfered ++ * a 0 length packet at the end. For Slave and ++ * Buffer DMA modes in this case SW has ++ * to initiate 2 transfers one with transfer size, ++ * and the second with 0 size. For Descriptor ++ * DMA mode SW is able to initiate a transfer, ++ * which will handle all the packets including ++ * the last 0 length. ++ */ ++ ep->dwc_ep.sent_zlp = 0; ++ dwc_otg_ep_start_zl_transfer(core_if, ++ &ep->dwc_ep); ++ } else { ++ is_last = 1; ++ } ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "addr %p, %d-%s len=%d cnt=%d xsize=%d pktcnt=%d\n", ++ &out_ep_regs->doeptsiz, ep->dwc_ep.num, ++ ep->dwc_ep.is_in ? "IN" : "OUT", ++ ep->dwc_ep.xfer_len, ep->dwc_ep.xfer_count, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ } ++ ++ /* Complete the request */ ++ if (is_last) { ++#ifdef DWC_UTE_CFI ++ if (ep->dwc_ep.buff_mode != BM_STANDARD) { ++ req->actual = ep->dwc_ep.cfi_req_len - byte_count; ++ } else { ++#endif ++ req->actual = ep->dwc_ep.xfer_count; ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ if (req->dw_align_buf) { ++ if (!ep->dwc_ep.is_in) { ++ dwc_memcpy(req->buf, req->dw_align_buf, req->length); ++ } ++ DWC_DMA_FREE(req->length, req->dw_align_buf, ++ req->dw_align_buf_dma); ++ } ++ ++ dwc_otg_request_done(ep, req, 0); ++ ++ ep->dwc_ep.start_xfer_buff = 0; ++ ep->dwc_ep.xfer_buff = 0; ++ ep->dwc_ep.xfer_len = 0; ++ ++ /* If there is a request in the queue start it. */ ++ start_next_request(ep); ++ } ++} ++ ++#ifdef DWC_EN_ISOC ++ ++/** ++ * This function BNA interrupt for Isochronous EPs ++ * ++ */ ++static void dwc_otg_pcd_handle_iso_bna(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_ep_t *dwc_ep = &ep->dwc_ep; ++ volatile uint32_t *addr; ++ depctl_data_t depctl = {.d32 = 0 }; ++ dwc_otg_pcd_t *pcd = ep->pcd; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ int i; ++ ++ dma_desc = ++ dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * (dwc_ep->proc_buf_num); ++ ++ if (dwc_ep->is_in) { ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ for (i = 0; i < dwc_ep->desc_cnt; ++i, ++dma_desc) { ++ sts.d32 = dma_desc->status.d32; ++ sts.b_iso_in.bs = BS_HOST_READY; ++ dma_desc->status.d32 = sts.d32; ++ } ++ } else { ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ for (i = 0; i < dwc_ep->desc_cnt; ++i, ++dma_desc) { ++ sts.d32 = dma_desc->status.d32; ++ sts.b_iso_out.bs = BS_HOST_READY; ++ dma_desc->status.d32 = sts.d32; ++ } ++ } ++ ++ if (dwc_ep->is_in == 0) { ++ addr = ++ &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep-> ++ num]->doepctl; ++ } else { ++ addr = ++ &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl; ++ } ++ depctl.b.epena = 1; ++ DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32); ++} ++ ++/** ++ * This function sets latest iso packet information(non-PTI mode) ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++void set_current_pkt_info(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ dma_addr_t dma_addr; ++ uint32_t offset; ++ ++ if (ep->proc_buf_num) ++ dma_addr = ep->dma_addr1; ++ else ++ dma_addr = ep->dma_addr0; ++ ++ if (ep->is_in) { ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if->dev_if-> ++ in_ep_regs[ep->num]->dieptsiz); ++ offset = ep->data_per_frame; ++ } else { ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[ep->num]->doeptsiz); ++ offset = ++ ep->data_per_frame + ++ (0x4 & (0x4 - (ep->data_per_frame & 0x3))); ++ } ++ ++ if (!deptsiz.b.xfersize) { ++ ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame; ++ ep->pkt_info[ep->cur_pkt].offset = ++ ep->cur_pkt_dma_addr - dma_addr; ++ ep->pkt_info[ep->cur_pkt].status = 0; ++ } else { ++ ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame; ++ ep->pkt_info[ep->cur_pkt].offset = ++ ep->cur_pkt_dma_addr - dma_addr; ++ ep->pkt_info[ep->cur_pkt].status = -DWC_E_NO_DATA; ++ } ++ ep->cur_pkt_addr += offset; ++ ep->cur_pkt_dma_addr += offset; ++ ep->cur_pkt++; ++} ++ ++/** ++ * This function sets latest iso packet information(DDMA mode) ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dwc_ep The EP to start the transfer on. ++ * ++ */ ++static void set_ddma_iso_pkts_info(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * dwc_ep) ++{ ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ iso_pkt_info_t *iso_packet; ++ uint32_t data_per_desc; ++ uint32_t offset; ++ int i, j; ++ ++ iso_packet = dwc_ep->pkt_info; ++ ++ /** Reinit closed DMA Descriptors*/ ++ /** ISO OUT EP */ ++ if (dwc_ep->is_in == 0) { ++ dma_desc = ++ dwc_ep->iso_desc_addr + ++ dwc_ep->desc_cnt * dwc_ep->proc_buf_num; ++ offset = 0; ++ ++ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; ++ i += dwc_ep->pkt_per_frm) { ++ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) { ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep-> ++ data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - ++ data_per_desc % ++ 4) : 0; ++ ++ sts.d32 = dma_desc->status.d32; ++ ++ /* Write status in iso_packet_decsriptor */ ++ iso_packet->status = ++ sts.b_iso_out.rxsts + ++ (sts.b_iso_out.bs ^ BS_DMA_DONE); ++ if (iso_packet->status) { ++ iso_packet->status = -DWC_E_NO_DATA; ++ } ++ ++ /* Received data length */ ++ if (!sts.b_iso_out.rxbytes) { ++ iso_packet->length = ++ data_per_desc - ++ sts.b_iso_out.rxbytes; ++ } else { ++ iso_packet->length = ++ data_per_desc - ++ sts.b_iso_out.rxbytes + (4 - ++ dwc_ep->data_per_frame ++ % 4); ++ } ++ ++ iso_packet->offset = offset; ++ ++ offset += data_per_desc; ++ dma_desc++; ++ iso_packet++; ++ } ++ } ++ ++ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) { ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; ++ ++ sts.d32 = dma_desc->status.d32; ++ ++ /* Write status in iso_packet_decsriptor */ ++ iso_packet->status = ++ sts.b_iso_out.rxsts + ++ (sts.b_iso_out.bs ^ BS_DMA_DONE); ++ if (iso_packet->status) { ++ iso_packet->status = -DWC_E_NO_DATA; ++ } ++ ++ /* Received data length */ ++ iso_packet->length = ++ dwc_ep->data_per_frame - sts.b_iso_out.rxbytes; ++ ++ iso_packet->offset = offset; ++ ++ offset += data_per_desc; ++ iso_packet++; ++ dma_desc++; ++ } ++ ++ sts.d32 = dma_desc->status.d32; ++ ++ /* Write status in iso_packet_decsriptor */ ++ iso_packet->status = ++ sts.b_iso_out.rxsts + (sts.b_iso_out.bs ^ BS_DMA_DONE); ++ if (iso_packet->status) { ++ iso_packet->status = -DWC_E_NO_DATA; ++ } ++ /* Received data length */ ++ if (!sts.b_iso_out.rxbytes) { ++ iso_packet->length = ++ dwc_ep->data_per_frame - sts.b_iso_out.rxbytes; ++ } else { ++ iso_packet->length = ++ dwc_ep->data_per_frame - sts.b_iso_out.rxbytes + ++ (4 - dwc_ep->data_per_frame % 4); ++ } ++ ++ iso_packet->offset = offset; ++ } else { ++/** ISO IN EP */ ++ ++ dma_desc = ++ dwc_ep->iso_desc_addr + ++ dwc_ep->desc_cnt * dwc_ep->proc_buf_num; ++ ++ for (i = 0; i < dwc_ep->desc_cnt - 1; i++) { ++ sts.d32 = dma_desc->status.d32; ++ ++ /* Write status in iso packet descriptor */ ++ iso_packet->status = ++ sts.b_iso_in.txsts + ++ (sts.b_iso_in.bs ^ BS_DMA_DONE); ++ if (iso_packet->status != 0) { ++ iso_packet->status = -DWC_E_NO_DATA; ++ ++ } ++ /* Bytes has been transfered */ ++ iso_packet->length = ++ dwc_ep->data_per_frame - sts.b_iso_in.txbytes; ++ ++ dma_desc++; ++ iso_packet++; ++ } ++ ++ sts.d32 = dma_desc->status.d32; ++ while (sts.b_iso_in.bs == BS_DMA_BUSY) { ++ sts.d32 = dma_desc->status.d32; ++ } ++ ++ /* Write status in iso packet descriptor ??? do be done with ERROR codes */ ++ iso_packet->status = ++ sts.b_iso_in.txsts + (sts.b_iso_in.bs ^ BS_DMA_DONE); ++ if (iso_packet->status != 0) { ++ iso_packet->status = -DWC_E_NO_DATA; ++ } ++ ++ /* Bytes has been transfered */ ++ iso_packet->length = ++ dwc_ep->data_per_frame - sts.b_iso_in.txbytes; ++ } ++} ++ ++/** ++ * This function reinitialize DMA Descriptors for Isochronous transfer ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dwc_ep The EP to start the transfer on. ++ * ++ */ ++static void reinit_ddma_iso_xfer(dwc_otg_core_if_t * core_if, dwc_ep_t * dwc_ep) ++{ ++ int i, j; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ dma_addr_t dma_ad; ++ volatile uint32_t *addr; ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ uint32_t data_per_desc; ++ ++ if (dwc_ep->is_in == 0) { ++ addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl; ++ } else { ++ addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl; ++ } ++ ++ if (dwc_ep->proc_buf_num == 0) { ++ /** Buffer 0 descriptors setup */ ++ dma_ad = dwc_ep->dma_addr0; ++ } else { ++ /** Buffer 1 descriptors setup */ ++ dma_ad = dwc_ep->dma_addr1; ++ } ++ ++ /** Reinit closed DMA Descriptors*/ ++ /** ISO OUT EP */ ++ if (dwc_ep->is_in == 0) { ++ dma_desc = ++ dwc_ep->iso_desc_addr + ++ dwc_ep->desc_cnt * dwc_ep->proc_buf_num; ++ ++ sts.b_iso_out.bs = BS_HOST_READY; ++ sts.b_iso_out.rxsts = 0; ++ sts.b_iso_out.l = 0; ++ sts.b_iso_out.sp = 0; ++ sts.b_iso_out.ioc = 0; ++ sts.b_iso_out.pid = 0; ++ sts.b_iso_out.framenum = 0; ++ ++ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; ++ i += dwc_ep->pkt_per_frm) { ++ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) { ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep-> ++ data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - ++ data_per_desc % ++ 4) : 0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ dma_ad += data_per_desc; ++ dma_desc++; ++ } ++ } ++ ++ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) { ++ ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ dma_desc++; ++ dma_ad += data_per_desc; ++ } ++ ++ sts.b_iso_out.ioc = 1; ++ sts.b_iso_out.l = dwc_ep->proc_buf_num; ++ ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ } else { ++/** ISO IN EP */ ++ ++ dma_desc = ++ dwc_ep->iso_desc_addr + ++ dwc_ep->desc_cnt * dwc_ep->proc_buf_num; ++ ++ sts.b_iso_in.bs = BS_HOST_READY; ++ sts.b_iso_in.txsts = 0; ++ sts.b_iso_in.sp = 0; ++ sts.b_iso_in.ioc = 0; ++ sts.b_iso_in.pid = dwc_ep->pkt_per_frm; ++ sts.b_iso_in.framenum = dwc_ep->next_frame; ++ sts.b_iso_in.txbytes = dwc_ep->data_per_frame; ++ sts.b_iso_in.l = 0; ++ ++ for (i = 0; i < dwc_ep->desc_cnt - 1; i++) { ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ sts.b_iso_in.framenum += dwc_ep->bInterval; ++ dma_ad += dwc_ep->data_per_frame; ++ dma_desc++; ++ } ++ ++ sts.b_iso_in.ioc = 1; ++ sts.b_iso_in.l = dwc_ep->proc_buf_num; ++ ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ dwc_ep->next_frame = ++ sts.b_iso_in.framenum + dwc_ep->bInterval * 1; ++ } ++ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1; ++} ++ ++/** ++ * This function is to handle Iso EP transfer complete interrupt ++ * in case Iso out packet was dropped ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dwc_ep The EP for wihich transfer complete was asserted ++ * ++ */ ++static uint32_t handle_iso_out_pkt_dropped(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * dwc_ep) ++{ ++ uint32_t dma_addr; ++ uint32_t drp_pkt; ++ uint32_t drp_pkt_cnt; ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ int i; ++ ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[dwc_ep->num]->doeptsiz); ++ ++ drp_pkt = dwc_ep->pkt_cnt - deptsiz.b.pktcnt; ++ drp_pkt_cnt = dwc_ep->pkt_per_frm - (drp_pkt % dwc_ep->pkt_per_frm); ++ ++ /* Setting dropped packets status */ ++ for (i = 0; i < drp_pkt_cnt; ++i) { ++ dwc_ep->pkt_info[drp_pkt].status = -DWC_E_NO_DATA; ++ drp_pkt++; ++ deptsiz.b.pktcnt--; ++ } ++ ++ if (deptsiz.b.pktcnt > 0) { ++ deptsiz.b.xfersize = ++ dwc_ep->xfer_len - (dwc_ep->pkt_cnt - ++ deptsiz.b.pktcnt) * dwc_ep->maxpacket; ++ } else { ++ deptsiz.b.xfersize = 0; ++ deptsiz.b.pktcnt = 0; ++ } ++ ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz, ++ deptsiz.d32); ++ ++ if (deptsiz.b.pktcnt > 0) { ++ if (dwc_ep->proc_buf_num) { ++ dma_addr = ++ dwc_ep->dma_addr1 + dwc_ep->xfer_len - ++ deptsiz.b.xfersize; ++ } else { ++ dma_addr = ++ dwc_ep->dma_addr0 + dwc_ep->xfer_len - ++ deptsiz.b.xfersize;; ++ } ++ ++ DWC_WRITE_REG32(&core_if->dev_if-> ++ out_ep_regs[dwc_ep->num]->doepdma, dma_addr); ++ ++ /** Re-enable endpoint, clear nak */ ++ depctl.d32 = 0; ++ depctl.b.epena = 1; ++ depctl.b.cnak = 1; ++ ++ DWC_MODIFY_REG32(&core_if->dev_if-> ++ out_ep_regs[dwc_ep->num]->doepctl, depctl.d32, ++ depctl.d32); ++ return 0; ++ } else { ++ return 1; ++ } ++} ++ ++/** ++ * This function sets iso packets information(PTI mode) ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++static uint32_t set_iso_pkts_info(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ int i, j; ++ dma_addr_t dma_ad; ++ iso_pkt_info_t *packet_info = ep->pkt_info; ++ uint32_t offset; ++ uint32_t frame_data; ++ deptsiz_data_t deptsiz; ++ ++ if (ep->proc_buf_num == 0) { ++ /** Buffer 0 descriptors setup */ ++ dma_ad = ep->dma_addr0; ++ } else { ++ /** Buffer 1 descriptors setup */ ++ dma_ad = ep->dma_addr1; ++ } ++ ++ if (ep->is_in) { ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ dieptsiz); ++ } else { ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[ep->num]-> ++ doeptsiz); ++ } ++ ++ if (!deptsiz.b.xfersize) { ++ offset = 0; ++ for (i = 0; i < ep->pkt_cnt; i += ep->pkt_per_frm) { ++ frame_data = ep->data_per_frame; ++ for (j = 0; j < ep->pkt_per_frm; ++j) { ++ ++ /* Packet status - is not set as initially ++ * it is set to 0 and if packet was sent ++ successfully, status field will remain 0*/ ++ ++ /* Bytes has been transfered */ ++ packet_info->length = ++ (ep->maxpacket < ++ frame_data) ? ep->maxpacket : frame_data; ++ ++ /* Received packet offset */ ++ packet_info->offset = offset; ++ offset += packet_info->length; ++ frame_data -= packet_info->length; ++ ++ packet_info++; ++ } ++ } ++ return 1; ++ } else { ++ /* This is a workaround for in case of Transfer Complete with ++ * PktDrpSts interrupts merging - in this case Transfer complete ++ * interrupt for Isoc Out Endpoint is asserted without PktDrpSts ++ * set and with DOEPTSIZ register non zero. Investigations showed, ++ * that this happens when Out packet is dropped, but because of ++ * interrupts merging during first interrupt handling PktDrpSts ++ * bit is cleared and for next merged interrupts it is not reset. ++ * In this case SW hadles the interrupt as if PktDrpSts bit is set. ++ */ ++ if (ep->is_in) { ++ return 1; ++ } else { ++ return handle_iso_out_pkt_dropped(core_if, ep); ++ } ++ } ++} ++ ++/** ++ * This function is to handle Iso EP transfer complete interrupt ++ * ++ * @param pcd The PCD ++ * @param ep The EP for which transfer complete was asserted ++ * ++ */ ++static void complete_iso_ep(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd); ++ dwc_ep_t *dwc_ep = &ep->dwc_ep; ++ uint8_t is_last = 0; ++ ++ if (ep->dwc_ep.next_frame == 0xffffffff) { ++ DWC_WARN("Next frame is not set!\n"); ++ return; ++ } ++ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable) { ++ set_ddma_iso_pkts_info(core_if, dwc_ep); ++ reinit_ddma_iso_xfer(core_if, dwc_ep); ++ is_last = 1; ++ } else { ++ if (core_if->pti_enh_enable) { ++ if (set_iso_pkts_info(core_if, dwc_ep)) { ++ dwc_ep->proc_buf_num = ++ (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ dwc_otg_iso_ep_start_buf_transfer ++ (core_if, dwc_ep); ++ is_last = 1; ++ } ++ } else { ++ set_current_pkt_info(core_if, dwc_ep); ++ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { ++ is_last = 1; ++ dwc_ep->cur_pkt = 0; ++ dwc_ep->proc_buf_num = ++ (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ if (dwc_ep->proc_buf_num) { ++ dwc_ep->cur_pkt_addr = ++ dwc_ep->xfer_buff1; ++ dwc_ep->cur_pkt_dma_addr = ++ dwc_ep->dma_addr1; ++ } else { ++ dwc_ep->cur_pkt_addr = ++ dwc_ep->xfer_buff0; ++ dwc_ep->cur_pkt_dma_addr = ++ dwc_ep->dma_addr0; ++ } ++ ++ } ++ dwc_otg_iso_ep_start_frm_transfer(core_if, ++ dwc_ep); ++ } ++ } ++ } else { ++ set_current_pkt_info(core_if, dwc_ep); ++ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { ++ is_last = 1; ++ dwc_ep->cur_pkt = 0; ++ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ if (dwc_ep->proc_buf_num) { ++ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1; ++ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1; ++ } else { ++ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0; ++ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0; ++ } ++ ++ } ++ dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep); ++ } ++ if (is_last) ++ dwc_otg_iso_buffer_done(pcd, ep, ep->iso_req_handle); ++} ++#endif /* DWC_EN_ISOC */ ++ ++/** ++ * This function handle BNA interrupt for Non Isochronous EPs ++ * ++ */ ++static void dwc_otg_pcd_handle_noniso_bna(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_ep_t *dwc_ep = &ep->dwc_ep; ++ volatile uint32_t *addr; ++ depctl_data_t depctl = {.d32 = 0 }; ++ dwc_otg_pcd_t *pcd = ep->pcd; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ dwc_otg_core_if_t *core_if = ep->pcd->core_if; ++ int i, start; ++ ++ if (!dwc_ep->desc_cnt) ++ DWC_WARN("Ep%d %s Descriptor count = %d \n", dwc_ep->num, ++ (dwc_ep->is_in ? "IN" : "OUT"), dwc_ep->desc_cnt); ++ ++ if (core_if->core_params->cont_on_bna && !dwc_ep->is_in ++ && dwc_ep->type != DWC_OTG_EP_TYPE_CONTROL) { ++ uint32_t doepdma; ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[dwc_ep->num]; ++ doepdma = DWC_READ_REG32(&(out_regs->doepdma)); ++ start = (doepdma - dwc_ep->dma_desc_addr)/sizeof(dwc_otg_dev_dma_desc_t); ++ dma_desc = &(dwc_ep->desc_addr[start]); ++ } else { ++ start = 0; ++ dma_desc = dwc_ep->desc_addr; ++ } ++ ++ ++ for (i = start; i < dwc_ep->desc_cnt; ++i, ++dma_desc) { ++ sts.d32 = dma_desc->status.d32; ++ sts.b.bs = BS_HOST_READY; ++ dma_desc->status.d32 = sts.d32; ++ } ++ ++ if (dwc_ep->is_in == 0) { ++ addr = ++ &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep->num]-> ++ doepctl; ++ } else { ++ addr = ++ &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl; ++ } ++ depctl.b.epena = 1; ++ depctl.b.cnak = 1; ++ DWC_MODIFY_REG32(addr, 0, depctl.d32); ++} ++ ++/** ++ * This function handles EP0 Control transfers. ++ * ++ * The state of the control transfers are tracked in ++ * <code>ep0state</code>. ++ */ ++static void handle_ep0(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ dev_dma_desc_sts_t desc_sts; ++ deptsiz0_data_t deptsiz; ++ uint32_t byte_count; ++ ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__); ++ print_ep0_state(pcd); ++#endif ++ ++// DWC_PRINTF("HANDLE EP0\n"); ++ ++ switch (pcd->ep0state) { ++ case EP0_DISCONNECT: ++ break; ++ ++ case EP0_IDLE: ++ pcd->request_config = 0; ++ ++ pcd_setup(pcd); ++ break; ++ ++ case EP0_IN_DATA_PHASE: ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, "DATA_IN EP%d-%s: type=%d, mps=%d\n", ++ ep0->dwc_ep.num, (ep0->dwc_ep.is_in ? "IN" : "OUT"), ++ ep0->dwc_ep.type, ep0->dwc_ep.maxpacket); ++#endif ++ ++ if (core_if->dma_enable != 0) { ++ /* ++ * For EP0 we can only program 1 packet at a time so we ++ * need to do the make calculations after each complete. ++ * Call write_packet to make the calculations, as in ++ * slave mode, and use those values to determine if we ++ * can complete. ++ */ ++ if (core_if->dma_desc_enable == 0) { ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if-> ++ dev_if->in_ep_regs[0]-> ++ dieptsiz); ++ byte_count = ++ ep0->dwc_ep.xfer_len - deptsiz.b.xfersize; ++ } else { ++ desc_sts = ++ core_if->dev_if->in_desc_addr->status; ++ byte_count = ++ ep0->dwc_ep.xfer_len - desc_sts.b.bytes; ++ } ++ ep0->dwc_ep.xfer_count += byte_count; ++ ep0->dwc_ep.xfer_buff += byte_count; ++ ep0->dwc_ep.dma_addr += byte_count; ++ } ++ if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) { ++ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd), ++ &ep0->dwc_ep); ++ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n"); ++ } else if (ep0->dwc_ep.sent_zlp) { ++ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd), ++ &ep0->dwc_ep); ++ ep0->dwc_ep.sent_zlp = 0; ++ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER sent zlp\n"); ++ } else { ++ ep0_complete_request(ep0); ++ DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n"); ++ } ++ break; ++ case EP0_OUT_DATA_PHASE: ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, "DATA_OUT EP%d-%s: type=%d, mps=%d\n", ++ ep0->dwc_ep.num, (ep0->dwc_ep.is_in ? "IN" : "OUT"), ++ ep0->dwc_ep.type, ep0->dwc_ep.maxpacket); ++#endif ++ if (core_if->dma_enable != 0) { ++ if (core_if->dma_desc_enable == 0) { ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if-> ++ dev_if->out_ep_regs[0]-> ++ doeptsiz); ++ byte_count = ++ ep0->dwc_ep.maxpacket - deptsiz.b.xfersize; ++ } else { ++ desc_sts = ++ core_if->dev_if->out_desc_addr->status; ++ byte_count = ++ ep0->dwc_ep.maxpacket - desc_sts.b.bytes; ++ } ++ ep0->dwc_ep.xfer_count += byte_count; ++ ep0->dwc_ep.xfer_buff += byte_count; ++ ep0->dwc_ep.dma_addr += byte_count; ++ } ++ if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) { ++ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd), ++ &ep0->dwc_ep); ++ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n"); ++ } else if (ep0->dwc_ep.sent_zlp) { ++ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd), ++ &ep0->dwc_ep); ++ ep0->dwc_ep.sent_zlp = 0; ++ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER sent zlp\n"); ++ } else { ++ ep0_complete_request(ep0); ++ DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n"); ++ } ++ break; ++ ++ case EP0_IN_STATUS_PHASE: ++ case EP0_OUT_STATUS_PHASE: ++ DWC_DEBUGPL(DBG_PCD, "CASE: EP0_STATUS\n"); ++ ep0_complete_request(ep0); ++ pcd->ep0state = EP0_IDLE; ++ ep0->stopped = 1; ++ ep0->dwc_ep.is_in = 0; /* OUT for next SETUP */ ++ ++ /* Prepare for more SETUP Packets */ ++ if (core_if->dma_enable) { ++ ep0_out_start(core_if, pcd); ++ } ++ break; ++ ++ case EP0_STALL: ++ DWC_ERROR("EP0 STALLed, should not get here pcd_setup()\n"); ++ break; ++ } ++#ifdef DEBUG_EP0 ++ print_ep0_state(pcd); ++#endif ++} ++ ++/** ++ * Restart transfer ++ */ ++static void restart_transfer(dwc_otg_pcd_t * pcd, const uint32_t epnum) ++{ ++ dwc_otg_core_if_t *core_if; ++ dwc_otg_dev_if_t *dev_if; ++ deptsiz_data_t dieptsiz = {.d32 = 0 }; ++ dwc_otg_pcd_ep_t *ep; ++ ++ ep = get_in_ep(pcd, epnum); ++ ++#ifdef DWC_EN_ISOC ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { ++ return; ++ } ++#endif /* DWC_EN_ISOC */ ++ ++ core_if = GET_CORE_IF(pcd); ++ dev_if = core_if->dev_if; ++ ++ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dieptsiz); ++ ++ DWC_DEBUGPL(DBG_PCD, "xfer_buff=%p xfer_count=%0x xfer_len=%0x" ++ " stopped=%d\n", ep->dwc_ep.xfer_buff, ++ ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len, ep->stopped); ++ /* ++ * If xfersize is 0 and pktcnt in not 0, resend the last packet. ++ */ ++ if (dieptsiz.b.pktcnt && dieptsiz.b.xfersize == 0 && ++ ep->dwc_ep.start_xfer_buff != 0) { ++ if (ep->dwc_ep.total_len <= ep->dwc_ep.maxpacket) { ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.xfer_buff = ep->dwc_ep.start_xfer_buff; ++ ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count; ++ } else { ++ ep->dwc_ep.xfer_count -= ep->dwc_ep.maxpacket; ++ /* convert packet size to dwords. */ ++ ep->dwc_ep.xfer_buff -= ep->dwc_ep.maxpacket; ++ ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count; ++ } ++ ep->stopped = 0; ++ DWC_DEBUGPL(DBG_PCD, "xfer_buff=%p xfer_count=%0x " ++ "xfer_len=%0x stopped=%d\n", ++ ep->dwc_ep.xfer_buff, ++ ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len, ++ ep->stopped); ++ if (epnum == 0) { ++ dwc_otg_ep0_start_transfer(core_if, &ep->dwc_ep); ++ } else { ++ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep); ++ } ++ } ++} ++ ++/* ++ * This function create new nextep sequnce based on Learn Queue. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ */ ++void predict_nextep_seq( dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_device_global_regs_t *dev_global_regs = ++ core_if->dev_if->dev_global_regs; ++ const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth; ++ /* Number of Token Queue Registers */ ++ const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8; ++ dtknq1_data_t dtknqr1; ++ uint32_t in_tkn_epnums[4]; ++ uint8_t seqnum[MAX_EPS_CHANNELS]; ++ uint8_t intkn_seq[TOKEN_Q_DEPTH]; ++ grstctl_t resetctl = {.d32 = 0 }; ++ uint8_t temp; ++ int ndx = 0; ++ int start = 0; ++ int end = 0; ++ int sort_done = 0; ++ int i = 0; ++ volatile uint32_t *addr = &dev_global_regs->dtknqr1; ++ ++ ++ DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH); ++ ++ /* Read the DTKNQ Registers */ ++ for (i = 0; i < DTKNQ_REG_CNT; i++) { ++ in_tkn_epnums[i] = DWC_READ_REG32(addr); ++ DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i + 1, ++ in_tkn_epnums[i]); ++ if (addr == &dev_global_regs->dvbusdis) { ++ addr = &dev_global_regs->dtknqr3_dthrctl; ++ } else { ++ ++addr; ++ } ++ ++ } ++ ++ /* Copy the DTKNQR1 data to the bit field. */ ++ dtknqr1.d32 = in_tkn_epnums[0]; ++ if (dtknqr1.b.wrap_bit) { ++ ndx = dtknqr1.b.intknwptr; ++ end = ndx -1; ++ if (end < 0) ++ end = TOKEN_Q_DEPTH -1; ++ } else { ++ ndx = 0; ++ end = dtknqr1.b.intknwptr -1; ++ if (end < 0) ++ end = 0; ++ } ++ start = ndx; ++ ++ /* Fill seqnum[] by initial values: EP number + 31 */ ++ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { ++ seqnum[i] = i +31; ++ } ++ ++ /* Fill intkn_seq[] from in_tkn_epnums[0] */ ++ for (i=0; i < 6; i++) ++ intkn_seq[i] = (in_tkn_epnums[0] >> ((7-i) * 4)) & 0xf; ++ ++ if (TOKEN_Q_DEPTH > 6) { ++ /* Fill intkn_seq[] from in_tkn_epnums[1] */ ++ for (i=6; i < 14; i++) ++ intkn_seq[i] = ++ (in_tkn_epnums[1] >> ((7 - (i - 6)) * 4)) & 0xf; ++ } ++ ++ if (TOKEN_Q_DEPTH > 14) { ++ /* Fill intkn_seq[] from in_tkn_epnums[1] */ ++ for (i=14; i < 22; i++) ++ intkn_seq[i] = ++ (in_tkn_epnums[2] >> ((7 - (i - 14)) * 4)) & 0xf; ++ } ++ ++ if (TOKEN_Q_DEPTH > 22) { ++ /* Fill intkn_seq[] from in_tkn_epnums[1] */ ++ for (i=22; i < 30; i++) ++ intkn_seq[i] = ++ (in_tkn_epnums[3] >> ((7 - (i - 22)) * 4)) & 0xf; ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s start=%d end=%d intkn_seq[]:\n", __func__, ++ start, end); ++ for (i=0; i<TOKEN_Q_DEPTH; i++) ++ DWC_DEBUGPL(DBG_PCDV,"%d\n", intkn_seq[i]); ++ ++ /* Update seqnum based on intkn_seq[] */ ++ i = 0; ++ do { ++ seqnum[intkn_seq[ndx]] = i; ++ ndx++; ++ i++; ++ if (ndx == TOKEN_Q_DEPTH) ++ ndx = 0; ++ } while ( i < TOKEN_Q_DEPTH ); ++ ++ /* Mark non active EP's in seqnum[] by 0xff */ ++ for (i=0; i<=core_if->dev_if->num_in_eps; i++) { ++ if (core_if->nextep_seq[i] == 0xff ) ++ seqnum[i] = 0xff; ++ } ++ ++ /* Sort seqnum[] */ ++ sort_done = 0; ++ while (!sort_done) { ++ sort_done = 1; ++ for (i=0; i<core_if->dev_if->num_in_eps; i++) { ++ if (seqnum[i] > seqnum[i+1]) { ++ temp = seqnum[i]; ++ seqnum[i] = seqnum[i+1]; ++ seqnum[i+1] = temp; ++ sort_done = 0; ++ } ++ } ++ } ++ ++ ndx = start + seqnum[0]; ++ if (ndx >= TOKEN_Q_DEPTH) ++ ndx = ndx % TOKEN_Q_DEPTH; ++ core_if->first_in_nextep_seq = intkn_seq[ndx]; ++ ++ /* Update seqnum[] by EP numbers */ ++ for (i=0; i<=core_if->dev_if->num_in_eps; i++) { ++ ndx = start + i; ++ if (seqnum[i] < 31) { ++ ndx = start + seqnum[i]; ++ if (ndx >= TOKEN_Q_DEPTH) ++ ndx = ndx % TOKEN_Q_DEPTH; ++ seqnum[i] = intkn_seq[ndx]; ++ } else { ++ if (seqnum[i] < 0xff) { ++ seqnum[i] = seqnum[i] - 31; ++ } else { ++ break; ++ } ++ } ++ } ++ ++ /* Update nextep_seq[] based on seqnum[] */ ++ for (i=0; i<core_if->dev_if->num_in_eps; i++) { ++ if (seqnum[i] != 0xff) { ++ if (seqnum[i+1] != 0xff) { ++ core_if->nextep_seq[seqnum[i]] = seqnum[i+1]; ++ } else { ++ core_if->nextep_seq[seqnum[i]] = core_if->first_in_nextep_seq; ++ break; ++ } ++ } else { ++ break; ++ } ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s first_in_nextep_seq= %2d; nextep_seq[]:\n", ++ __func__, core_if->first_in_nextep_seq); ++ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { ++ DWC_DEBUGPL(DBG_PCDV,"%2d\n", core_if->nextep_seq[i]); ++ } ++ ++ /* Flush the Learning Queue */ ++ resetctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->grstctl); ++ resetctl.b.intknqflsh = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32); ++ ++ ++} ++ ++/** ++ * handle the IN EP disable interrupt. ++ */ ++static inline void handle_in_ep_disable_intr(dwc_otg_pcd_t * pcd, ++ const uint32_t epnum) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ deptsiz_data_t dieptsiz = {.d32 = 0 }; ++ dctl_data_t dctl = {.d32 = 0 }; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ gintmsk_data_t gintmsk_data; ++ depctl_data_t depctl; ++ uint32_t diepdma; ++ uint32_t remain_to_transfer = 0; ++ uint8_t i; ++ uint32_t xfer_size; ++ ++ ep = get_in_ep(pcd, epnum); ++ dwc_ep = &ep->dwc_ep; ++ ++ if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num); ++ complete_ep(ep); ++ return; ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "diepctl%d=%0x\n", epnum, ++ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl)); ++ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dieptsiz); ++ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl); ++ ++ DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n", ++ dieptsiz.b.pktcnt, dieptsiz.b.xfersize); ++ ++ if ((core_if->start_predict == 0) || (depctl.b.eptype & 1)) { ++ if (ep->stopped) { ++ if (core_if->en_multiple_tx_fifo) ++ /* Flush the Tx FIFO */ ++ dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num); ++ /* Clear the Global IN NP NAK */ ++ dctl.d32 = 0; ++ dctl.b.cgnpinnak = 1; ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); ++ /* Restart the transaction */ ++ if (dieptsiz.b.pktcnt != 0 || dieptsiz.b.xfersize != 0) { ++ restart_transfer(pcd, epnum); ++ } ++ } else { ++ /* Restart the transaction */ ++ if (dieptsiz.b.pktcnt != 0 || dieptsiz.b.xfersize != 0) { ++ restart_transfer(pcd, epnum); ++ } ++ DWC_DEBUGPL(DBG_ANY, "STOPPED!!!\n"); ++ } ++ return; ++ } ++ ++ if (core_if->start_predict > 2) { // NP IN EP ++ core_if->start_predict--; ++ return; ++ } ++ ++ core_if->start_predict--; ++ ++ if (core_if->start_predict == 1) { // All NP IN Ep's disabled now ++ ++ predict_nextep_seq(core_if); ++ ++ /* Update all active IN EP's NextEP field based of nextep_seq[] */ ++ for ( i = 0; i <= core_if->dev_if->num_in_eps; i++) { ++ depctl.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ if (core_if->nextep_seq[i] != 0xff) { // Active NP IN EP ++ depctl.b.nextep = core_if->nextep_seq[i]; ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32); ++ } ++ } ++ /* Flush Shared NP TxFIFO */ ++ dwc_otg_flush_tx_fifo(core_if, 0); ++ /* Rewind buffers */ ++ if (!core_if->dma_desc_enable) { ++ i = core_if->first_in_nextep_seq; ++ do { ++ ep = get_in_ep(pcd, i); ++ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz); ++ xfer_size = ep->dwc_ep.total_len - ep->dwc_ep.xfer_count; ++ if (xfer_size > ep->dwc_ep.maxxfer) ++ xfer_size = ep->dwc_ep.maxxfer; ++ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ if (dieptsiz.b.pktcnt != 0) { ++ if (xfer_size == 0) { ++ remain_to_transfer = 0; ++ } else { ++ if ((xfer_size % ep->dwc_ep.maxpacket) == 0) { ++ remain_to_transfer = ++ dieptsiz.b.pktcnt * ep->dwc_ep.maxpacket; ++ } else { ++ remain_to_transfer = ((dieptsiz.b.pktcnt -1) * ep->dwc_ep.maxpacket) ++ + (xfer_size % ep->dwc_ep.maxpacket); ++ } ++ } ++ diepdma = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepdma); ++ dieptsiz.b.xfersize = remain_to_transfer; ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->dieptsiz, dieptsiz.d32); ++ diepdma = ep->dwc_ep.dma_addr + (xfer_size - remain_to_transfer); ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepdma, diepdma); ++ } ++ i = core_if->nextep_seq[i]; ++ } while (i != core_if->first_in_nextep_seq); ++ } else { // dma_desc_enable ++ DWC_PRINTF("%s Learning Queue not supported in DDMA\n", __func__); ++ } ++ ++ /* Restart transfers in predicted sequences */ ++ i = core_if->first_in_nextep_seq; ++ do { ++ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz); ++ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ if (dieptsiz.b.pktcnt != 0) { ++ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ depctl.b.epena = 1; ++ depctl.b.cnak = 1; ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32); ++ } ++ i = core_if->nextep_seq[i]; ++ } while (i != core_if->first_in_nextep_seq); ++ ++ /* Clear the global non-periodic IN NAK handshake */ ++ dctl.d32 = 0; ++ dctl.b.cgnpinnak = 1; ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); ++ ++ /* Unmask EP Mismatch interrupt */ ++ gintmsk_data.d32 = 0; ++ gintmsk_data.b.epmismatch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, gintmsk_data.d32); ++ ++ core_if->start_predict = 0; ++ ++ } ++} ++ ++/** ++ * Handler for the IN EP timeout handshake interrupt. ++ */ ++static inline void handle_in_ep_timeout_intr(dwc_otg_pcd_t * pcd, ++ const uint32_t epnum) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ ++#ifdef DEBUG ++ deptsiz_data_t dieptsiz = {.d32 = 0 }; ++ uint32_t num = 0; ++#endif ++ dctl_data_t dctl = {.d32 = 0 }; ++ dwc_otg_pcd_ep_t *ep; ++ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ ep = get_in_ep(pcd, epnum); ++ ++ /* Disable the NP Tx Fifo Empty Interrrupt */ ++ if (!core_if->dma_enable) { ++ intr_mask.b.nptxfempty = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ } ++ /** @todo NGS Check EP type. ++ * Implement for Periodic EPs */ ++ /* ++ * Non-periodic EP ++ */ ++ /* Enable the Global IN NAK Effective Interrupt */ ++ intr_mask.b.ginnakeff = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, intr_mask.d32); ++ ++ /* Set Global IN NAK */ ++ dctl.b.sgnpinnak = 1; ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); ++ ++ ep->stopped = 1; ++ ++#ifdef DEBUG ++ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[num]->dieptsiz); ++ DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n", ++ dieptsiz.b.pktcnt, dieptsiz.b.xfersize); ++#endif ++ ++#ifdef DISABLE_PERIODIC_EP ++ /* ++ * Set the NAK bit for this EP to ++ * start the disable process. ++ */ ++ diepctl.d32 = 0; ++ diepctl.b.snak = 1; ++ DWC_MODIFY_REG32(&dev_if->in_ep_regs[num]->diepctl, diepctl.d32, ++ diepctl.d32); ++ ep->disabling = 1; ++ ep->stopped = 1; ++#endif ++} ++ ++/** ++ * Handler for the IN EP NAK interrupt. ++ */ ++static inline int32_t handle_in_ep_nak_intr(dwc_otg_pcd_t * pcd, ++ const uint32_t epnum) ++{ ++ /** @todo implement ISR */ ++ dwc_otg_core_if_t *core_if; ++ diepmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "IN EP NAK"); ++ core_if = GET_CORE_IF(pcd); ++ intr_mask.b.nak = 1; ++ ++ if (core_if->multiproc_int_enable) { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ diepeachintmsk[epnum], intr_mask.d32, 0); ++ } else { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->diepmsk, ++ intr_mask.d32, 0); ++ } ++ ++ return 1; ++} ++ ++/** ++ * Handler for the OUT EP Babble interrupt. ++ */ ++static inline int32_t handle_out_ep_babble_intr(dwc_otg_pcd_t * pcd, ++ const uint32_t epnum) ++{ ++ /** @todo implement ISR */ ++ dwc_otg_core_if_t *core_if; ++ doepmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", ++ "OUT EP Babble"); ++ core_if = GET_CORE_IF(pcd); ++ intr_mask.b.babble = 1; ++ ++ if (core_if->multiproc_int_enable) { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ doepeachintmsk[epnum], intr_mask.d32, 0); ++ } else { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk, ++ intr_mask.d32, 0); ++ } ++ ++ return 1; ++} ++ ++/** ++ * Handler for the OUT EP NAK interrupt. ++ */ ++static inline int32_t handle_out_ep_nak_intr(dwc_otg_pcd_t * pcd, ++ const uint32_t epnum) ++{ ++ /** @todo implement ISR */ ++ dwc_otg_core_if_t *core_if; ++ doepmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_ANY, "INTERRUPT Handler not implemented for %s\n", "OUT EP NAK"); ++ core_if = GET_CORE_IF(pcd); ++ intr_mask.b.nak = 1; ++ ++ if (core_if->multiproc_int_enable) { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ doepeachintmsk[epnum], intr_mask.d32, 0); ++ } else { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk, ++ intr_mask.d32, 0); ++ } ++ ++ return 1; ++} ++ ++/** ++ * Handler for the OUT EP NYET interrupt. ++ */ ++static inline int32_t handle_out_ep_nyet_intr(dwc_otg_pcd_t * pcd, ++ const uint32_t epnum) ++{ ++ /** @todo implement ISR */ ++ dwc_otg_core_if_t *core_if; ++ doepmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "OUT EP NYET"); ++ core_if = GET_CORE_IF(pcd); ++ intr_mask.b.nyet = 1; ++ ++ if (core_if->multiproc_int_enable) { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ doepeachintmsk[epnum], intr_mask.d32, 0); ++ } else { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk, ++ intr_mask.d32, 0); ++ } ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that an IN EP has a pending Interrupt. ++ * The sequence for handling the IN EP interrupt is shown below: ++ * -# Read the Device All Endpoint Interrupt register ++ * -# Repeat the following for each IN EP interrupt bit set (from ++ * LSB to MSB). ++ * -# Read the Device Endpoint Interrupt (DIEPINTn) register ++ * -# If "Transfer Complete" call the request complete function ++ * -# If "Endpoint Disabled" complete the EP disable procedure. ++ * -# If "AHB Error Interrupt" log error ++ * -# If "Time-out Handshake" log error ++ * -# If "IN Token Received when TxFIFO Empty" write packet to Tx ++ * FIFO. ++ * -# If "IN Token EP Mismatch" (disable, this is handled by EP ++ * Mismatch Interrupt) ++ */ ++static int32_t dwc_otg_pcd_handle_in_ep_intr(dwc_otg_pcd_t * pcd) ++{ ++#define CLEAR_IN_EP_INTR(__core_if,__epnum,__intr) \ ++do { \ ++ diepint_data_t diepint = {.d32=0}; \ ++ diepint.b.__intr = 1; \ ++ DWC_WRITE_REG32(&__core_if->dev_if->in_ep_regs[__epnum]->diepint, \ ++ diepint.d32); \ ++} while (0) ++ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ diepint_data_t diepint = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ uint32_t ep_intr; ++ uint32_t epnum = 0; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd); ++ ++ /* Read in the device interrupt bits */ ++ ep_intr = dwc_otg_read_dev_all_in_ep_intr(core_if); ++ ++ /* Service the Device IN interrupts for each endpoint */ ++ while (ep_intr) { ++ if (ep_intr & 0x1) { ++ uint32_t empty_msk; ++ /* Get EP pointer */ ++ ep = get_in_ep(pcd, epnum); ++ dwc_ep = &ep->dwc_ep; ++ ++ depctl.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl); ++ empty_msk = ++ DWC_READ_REG32(&dev_if-> ++ dev_global_regs->dtknqr4_fifoemptymsk); ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "IN EP INTERRUPT - %d\nepmty_msk - %8x diepctl - %8x\n", ++ epnum, empty_msk, depctl.d32); ++ ++ DWC_DEBUGPL(DBG_PCD, ++ "EP%d-%s: type=%d, mps=%d\n", ++ dwc_ep->num, (dwc_ep->is_in ? "IN" : "OUT"), ++ dwc_ep->type, dwc_ep->maxpacket); ++ ++ diepint.d32 = ++ dwc_otg_read_dev_in_ep_intr(core_if, dwc_ep); ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "EP %d Interrupt Register - 0x%x\n", epnum, ++ diepint.d32); ++ /* Transfer complete */ ++ if (diepint.b.xfercompl) { ++ /* Disable the NP Tx FIFO Empty ++ * Interrupt */ ++ if (core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.nptxfempty = 1; ++ DWC_MODIFY_REG32 ++ (&core_if->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ } else { ++ /* Disable the Tx FIFO Empty Interrupt for this EP */ ++ uint32_t fifoemptymsk = ++ 0x1 << dwc_ep->num; ++ DWC_MODIFY_REG32(&core_if-> ++ dev_if->dev_global_regs->dtknqr4_fifoemptymsk, ++ fifoemptymsk, 0); ++ } ++ /* Clear the bit in DIEPINTn for this interrupt */ ++ CLEAR_IN_EP_INTR(core_if, epnum, xfercompl); ++ ++ /* Complete the transfer */ ++ if (epnum == 0) { ++ handle_ep0(pcd); ++ } ++#ifdef DWC_EN_ISOC ++ else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ if (!ep->stopped) ++ complete_iso_ep(pcd, ep); ++ } ++#endif /* DWC_EN_ISOC */ ++#ifdef DWC_UTE_PER_IO ++ else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ if (!ep->stopped) ++ complete_xiso_ep(ep); ++ } ++#endif /* DWC_UTE_PER_IO */ ++ else { ++ if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC && ++ dwc_ep->bInterval > 1) { ++ dwc_ep->frame_num += dwc_ep->bInterval; ++ if (dwc_ep->frame_num > 0x3FFF) ++ { ++ dwc_ep->frm_overrun = 1; ++ dwc_ep->frame_num &= 0x3FFF; ++ } else ++ dwc_ep->frm_overrun = 0; ++ } ++ complete_ep(ep); ++ if(diepint.b.nak) ++ CLEAR_IN_EP_INTR(core_if, epnum, nak); ++ } ++ } ++ /* Endpoint disable */ ++ if (diepint.b.epdisabled) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d IN disabled\n", ++ epnum); ++ handle_in_ep_disable_intr(pcd, epnum); ++ ++ /* Clear the bit in DIEPINTn for this interrupt */ ++ CLEAR_IN_EP_INTR(core_if, epnum, epdisabled); ++ } ++ /* AHB Error */ ++ if (diepint.b.ahberr) { ++ DWC_ERROR("EP%d IN AHB Error\n", epnum); ++ /* Clear the bit in DIEPINTn for this interrupt */ ++ CLEAR_IN_EP_INTR(core_if, epnum, ahberr); ++ } ++ /* TimeOUT Handshake (non-ISOC IN EPs) */ ++ if (diepint.b.timeout) { ++ DWC_ERROR("EP%d IN Time-out\n", epnum); ++ handle_in_ep_timeout_intr(pcd, epnum); ++ ++ CLEAR_IN_EP_INTR(core_if, epnum, timeout); ++ } ++ /** IN Token received with TxF Empty */ ++ if (diepint.b.intktxfemp) { ++ DWC_DEBUGPL(DBG_ANY, ++ "EP%d IN TKN TxFifo Empty\n", ++ epnum); ++ if (!ep->stopped && epnum != 0) { ++ ++ diepmsk_data_t diepmsk = {.d32 = 0 }; ++ diepmsk.b.intktxfemp = 1; ++ ++ if (core_if->multiproc_int_enable) { ++ DWC_MODIFY_REG32 ++ (&dev_if->dev_global_regs->diepeachintmsk ++ [epnum], diepmsk.d32, 0); ++ } else { ++ DWC_MODIFY_REG32 ++ (&dev_if->dev_global_regs->diepmsk, ++ diepmsk.d32, 0); ++ } ++ } else if (core_if->dma_desc_enable ++ && epnum == 0 ++ && pcd->ep0state == ++ EP0_OUT_STATUS_PHASE) { ++ // EP0 IN set STALL ++ depctl.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs ++ [epnum]->diepctl); ++ ++ /* set the disable and stall bits */ ++ if (depctl.b.epena) { ++ depctl.b.epdis = 1; ++ } ++ depctl.b.stall = 1; ++ DWC_WRITE_REG32(&dev_if->in_ep_regs ++ [epnum]->diepctl, ++ depctl.d32); ++ } ++ CLEAR_IN_EP_INTR(core_if, epnum, intktxfemp); ++ } ++ /** IN Token Received with EP mismatch */ ++ if (diepint.b.intknepmis) { ++ DWC_DEBUGPL(DBG_ANY, ++ "EP%d IN TKN EP Mismatch\n", epnum); ++ CLEAR_IN_EP_INTR(core_if, epnum, intknepmis); ++ } ++ /** IN Endpoint NAK Effective */ ++ if (diepint.b.inepnakeff) { ++ DWC_DEBUGPL(DBG_ANY, ++ "EP%d IN EP NAK Effective\n", ++ epnum); ++ /* Periodic EP */ ++ if (ep->disabling) { ++ depctl.d32 = 0; ++ depctl.b.snak = 1; ++ depctl.b.epdis = 1; ++ DWC_MODIFY_REG32(&dev_if->in_ep_regs ++ [epnum]->diepctl, ++ depctl.d32, ++ depctl.d32); ++ } ++ CLEAR_IN_EP_INTR(core_if, epnum, inepnakeff); ++ ++ } ++ ++ /** IN EP Tx FIFO Empty Intr */ ++ if (diepint.b.emptyintr) { ++ DWC_DEBUGPL(DBG_ANY, ++ "EP%d Tx FIFO Empty Intr \n", ++ epnum); ++ write_empty_tx_fifo(pcd, epnum); ++ ++ CLEAR_IN_EP_INTR(core_if, epnum, emptyintr); ++ ++ } ++ ++ /** IN EP BNA Intr */ ++ if (diepint.b.bna) { ++ CLEAR_IN_EP_INTR(core_if, epnum, bna); ++ if (core_if->dma_desc_enable) { ++#ifdef DWC_EN_ISOC ++ if (dwc_ep->type == ++ DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * This checking is performed to prevent first "false" BNA ++ * handling occuring right after reconnect ++ */ ++ if (dwc_ep->next_frame != ++ 0xffffffff) ++ dwc_otg_pcd_handle_iso_bna(ep); ++ } else ++#endif /* DWC_EN_ISOC */ ++ { ++ dwc_otg_pcd_handle_noniso_bna(ep); ++ } ++ } ++ } ++ /* NAK Interrutp */ ++ if (diepint.b.nak) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d IN NAK Interrupt\n", ++ epnum); ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { ++ depctl_data_t depctl; ++ if (ep->dwc_ep.frame_num == 0xFFFFFFFF) { ++ ep->dwc_ep.frame_num = core_if->frame_num; ++ if (ep->dwc_ep.bInterval > 1) { ++ depctl.d32 = 0; ++ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl); ++ if (ep->dwc_ep.frame_num & 0x1) { ++ depctl.b.setd1pid = 1; ++ depctl.b.setd0pid = 0; ++ } else { ++ depctl.b.setd0pid = 1; ++ depctl.b.setd1pid = 0; ++ } ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32); ++ } ++ start_next_request(ep); ++ } ++ ep->dwc_ep.frame_num += ep->dwc_ep.bInterval; ++ if (dwc_ep->frame_num > 0x3FFF) { ++ dwc_ep->frm_overrun = 1; ++ dwc_ep->frame_num &= 0x3FFF; ++ } else ++ dwc_ep->frm_overrun = 0; ++ } ++ ++ CLEAR_IN_EP_INTR(core_if, epnum, nak); ++ } ++ } ++ epnum++; ++ ep_intr >>= 1; ++ } ++ ++ return 1; ++#undef CLEAR_IN_EP_INTR ++} ++ ++/** ++ * This interrupt indicates that an OUT EP has a pending Interrupt. ++ * The sequence for handling the OUT EP interrupt is shown below: ++ * -# Read the Device All Endpoint Interrupt register ++ * -# Repeat the following for each OUT EP interrupt bit set (from ++ * LSB to MSB). ++ * -# Read the Device Endpoint Interrupt (DOEPINTn) register ++ * -# If "Transfer Complete" call the request complete function ++ * -# If "Endpoint Disabled" complete the EP disable procedure. ++ * -# If "AHB Error Interrupt" log error ++ * -# If "Setup Phase Done" process Setup Packet (See Standard USB ++ * Command Processing) ++ */ ++static int32_t dwc_otg_pcd_handle_out_ep_intr(dwc_otg_pcd_t * pcd) ++{ ++#define CLEAR_OUT_EP_INTR(__core_if,__epnum,__intr) \ ++do { \ ++ doepint_data_t doepint = {.d32=0}; \ ++ doepint.b.__intr = 1; \ ++ DWC_WRITE_REG32(&__core_if->dev_if->out_ep_regs[__epnum]->doepint, \ ++ doepint.d32); \ ++} while (0) ++ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ uint32_t ep_intr; ++ doepint_data_t doepint = {.d32 = 0 }; ++ uint32_t epnum = 0; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ dctl_data_t dctl = {.d32 = 0 }; ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__); ++ ++ /* Read in the device interrupt bits */ ++ ep_intr = dwc_otg_read_dev_all_out_ep_intr(core_if); ++ ++ while (ep_intr) { ++ if (ep_intr & 0x1) { ++ /* Get EP pointer */ ++ ep = get_out_ep(pcd, epnum); ++ dwc_ep = &ep->dwc_ep; ++ ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, ++ "EP%d-%s: type=%d, mps=%d\n", ++ dwc_ep->num, (dwc_ep->is_in ? "IN" : "OUT"), ++ dwc_ep->type, dwc_ep->maxpacket); ++#endif ++ doepint.d32 = ++ dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep); ++ /* Moved this interrupt upper due to core deffect of asserting ++ * OUT EP 0 xfercompl along with stsphsrcvd in BDMA */ ++ if (doepint.b.stsphsercvd) { ++ deptsiz0_data_t deptsiz; ++ CLEAR_OUT_EP_INTR(core_if, epnum, stsphsercvd); ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[0]->doeptsiz); ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a ++ && core_if->dma_enable ++ && core_if->dma_desc_enable == 0 ++ && doepint.b.xfercompl ++ && deptsiz.b.xfersize == 24) { ++ CLEAR_OUT_EP_INTR(core_if, epnum, ++ xfercompl); ++ doepint.b.xfercompl = 0; ++ ep0_out_start(core_if, pcd); ++ } ++ if ((core_if->dma_desc_enable) || ++ (core_if->dma_enable ++ && core_if->snpsid >= ++ OTG_CORE_REV_3_00a)) { ++ do_setup_in_status_phase(pcd); ++ } ++ } ++ /* Transfer complete */ ++ if (doepint.b.xfercompl) { ++ ++ if (epnum == 0) { ++ /* Clear the bit in DOEPINTn for this interrupt */ ++ CLEAR_OUT_EP_INTR(core_if, epnum, xfercompl); ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { ++ DWC_DEBUGPL(DBG_PCDV, "DOEPINT=%x doepint=%x\n", ++ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[0]->doepint), ++ doepint.d32); ++ DWC_DEBUGPL(DBG_PCDV, "DOEPCTL=%x \n", ++ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[0]->doepctl)); ++ ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a ++ && core_if->dma_enable == 0) { ++ doepint_data_t doepint; ++ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[0]->doepint); ++ if (pcd->ep0state == EP0_IDLE && doepint.b.sr) { ++ CLEAR_OUT_EP_INTR(core_if, epnum, sr); ++ goto exit_xfercompl; ++ } ++ } ++ /* In case of DDMA look at SR bit to go to the Data Stage */ ++ if (core_if->dma_desc_enable) { ++ dev_dma_desc_sts_t status = {.d32 = 0}; ++ if (pcd->ep0state == EP0_IDLE) { ++ status.d32 = core_if->dev_if->setup_desc_addr[core_if-> ++ dev_if->setup_desc_index]->status.d32; ++ if(pcd->data_terminated) { ++ pcd->data_terminated = 0; ++ status.d32 = core_if->dev_if->out_desc_addr->status.d32; ++ dwc_memcpy(&pcd->setup_pkt->req, pcd->backup_buf, 8); ++ } ++ if (status.b.sr) { ++ if (doepint.b.setup) { ++ DWC_DEBUGPL(DBG_PCDV, "DMA DESC EP0_IDLE SR=1 setup=1\n"); ++ /* Already started data stage, clear setup */ ++ CLEAR_OUT_EP_INTR(core_if, epnum, setup); ++ doepint.b.setup = 0; ++ handle_ep0(pcd); ++ /* Prepare for more setup packets */ ++ if (pcd->ep0state == EP0_IN_STATUS_PHASE || ++ pcd->ep0state == EP0_IN_DATA_PHASE) { ++ ep0_out_start(core_if, pcd); ++ } ++ ++ goto exit_xfercompl; ++ } else { ++ /* Prepare for more setup packets */ ++ DWC_DEBUGPL(DBG_PCDV, ++ "EP0_IDLE SR=1 setup=0 new setup comes\n"); ++ ep0_out_start(core_if, pcd); ++ } ++ } ++ } else { ++ dwc_otg_pcd_request_t *req; ++ dev_dma_desc_sts_t status = {.d32 = 0}; ++ diepint_data_t diepint0; ++ diepint0.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepint); ++ ++ if (pcd->ep0state == EP0_STALL || pcd->ep0state == EP0_DISCONNECT) { ++ DWC_ERROR("EP0 is stalled/disconnected\n"); ++ } ++ ++ /* Clear IN xfercompl if set */ ++ if (diepint0.b.xfercompl && (pcd->ep0state == EP0_IN_STATUS_PHASE ++ || pcd->ep0state == EP0_IN_DATA_PHASE)) { ++ DWC_WRITE_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepint, diepint0.d32); ++ } ++ ++ status.d32 = core_if->dev_if->setup_desc_addr[core_if-> ++ dev_if->setup_desc_index]->status.d32; ++ ++ if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len ++ && (pcd->ep0state == EP0_OUT_DATA_PHASE)) ++ status.d32 = core_if->dev_if->out_desc_addr->status.d32; ++ if (pcd->ep0state == EP0_OUT_STATUS_PHASE) ++ status.d32 = status.d32 = core_if->dev_if-> ++ out_desc_addr->status.d32; ++ ++ if (status.b.sr) { ++ if (DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ DWC_DEBUGPL(DBG_PCDV, "Request queue empty!!\n"); ++ } else { ++ DWC_DEBUGPL(DBG_PCDV, "complete req!!\n"); ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len && ++ pcd->ep0state == EP0_OUT_DATA_PHASE) { ++ /* Read arrived setup packet from req->buf */ ++ dwc_memcpy(&pcd->setup_pkt->req, ++ req->buf + ep->dwc_ep.xfer_count, 8); ++ } ++ req->actual = ep->dwc_ep.xfer_count; ++ dwc_otg_request_done(ep, req, -ECONNRESET); ++ ep->dwc_ep.start_xfer_buff = 0; ++ ep->dwc_ep.xfer_buff = 0; ++ ep->dwc_ep.xfer_len = 0; ++ } ++ pcd->ep0state = EP0_IDLE; ++ if (doepint.b.setup) { ++ DWC_DEBUGPL(DBG_PCDV, "EP0_IDLE SR=1 setup=1\n"); ++ /* Data stage started, clear setup */ ++ CLEAR_OUT_EP_INTR(core_if, epnum, setup); ++ doepint.b.setup = 0; ++ handle_ep0(pcd); ++ /* Prepare for setup packets if ep0in was enabled*/ ++ if (pcd->ep0state == EP0_IN_STATUS_PHASE) { ++ ep0_out_start(core_if, pcd); ++ } ++ ++ goto exit_xfercompl; ++ } else { ++ /* Prepare for more setup packets */ ++ DWC_DEBUGPL(DBG_PCDV, ++ "EP0_IDLE SR=1 setup=0 new setup comes 2\n"); ++ ep0_out_start(core_if, pcd); ++ } ++ } ++ } ++ } ++ if (core_if->snpsid >= OTG_CORE_REV_2_94a && core_if->dma_enable ++ && core_if->dma_desc_enable == 0) { ++ doepint_data_t doepint_temp = {.d32 = 0}; ++ deptsiz0_data_t doeptsize0 = {.d32 = 0 }; ++ doepint_temp.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[ep->dwc_ep.num]->doepint); ++ doeptsize0.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[ep->dwc_ep.num]->doeptsiz); ++ if (pcd->ep0state == EP0_IDLE) { ++ if (doepint_temp.b.sr) { ++ CLEAR_OUT_EP_INTR(core_if, epnum, sr); ++ } ++ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[0]->doepint); ++ if (doeptsize0.b.supcnt == 3) { ++ DWC_DEBUGPL(DBG_ANY, "Rolling over!!!!!!!\n"); ++ ep->dwc_ep.stp_rollover = 1; ++ } ++ if (doepint.b.setup) { ++retry: ++ /* Already started data stage, clear setup */ ++ CLEAR_OUT_EP_INTR(core_if, epnum, setup); ++ doepint.b.setup = 0; ++ handle_ep0(pcd); ++ ep->dwc_ep.stp_rollover = 0; ++ /* Prepare for more setup packets */ ++ if (pcd->ep0state == EP0_IN_STATUS_PHASE || ++ pcd->ep0state == EP0_IN_DATA_PHASE) { ++ ep0_out_start(core_if, pcd); ++ } ++ goto exit_xfercompl; ++ } else { ++ /* Prepare for more setup packets */ ++ DWC_DEBUGPL(DBG_ANY, ++ "EP0_IDLE SR=1 setup=0 new setup comes\n"); ++ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[0]->doepint); ++ if(doepint.b.setup) ++ goto retry; ++ ep0_out_start(core_if, pcd); ++ } ++ } else { ++ dwc_otg_pcd_request_t *req; ++ diepint_data_t diepint0 = {.d32 = 0}; ++ doepint_data_t doepint_temp = {.d32 = 0}; ++ depctl_data_t diepctl0; ++ diepint0.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepint); ++ diepctl0.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepctl); ++ ++ if (pcd->ep0state == EP0_IN_DATA_PHASE ++ || pcd->ep0state == EP0_IN_STATUS_PHASE) { ++ if (diepint0.b.xfercompl) { ++ DWC_WRITE_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepint, diepint0.d32); ++ } ++ if (diepctl0.b.epena) { ++ diepint_data_t diepint = {.d32 = 0}; ++ diepctl0.b.snak = 1; ++ DWC_WRITE_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepctl, diepctl0.d32); ++ do { ++ dwc_udelay(10); ++ diepint.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepint); ++ } while (!diepint.b.inepnakeff); ++ diepint.b.inepnakeff = 1; ++ DWC_WRITE_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepint, diepint.d32); ++ diepctl0.d32 = 0; ++ diepctl0.b.epdis = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[0]->diepctl, ++ diepctl0.d32); ++ do { ++ dwc_udelay(10); ++ diepint.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepint); ++ } while (!diepint.b.epdisabled); ++ diepint.b.epdisabled = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[0]->diepint, ++ diepint.d32); ++ } ++ } ++ doepint_temp.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[ep->dwc_ep.num]->doepint); ++ if (doepint_temp.b.sr) { ++ CLEAR_OUT_EP_INTR(core_if, epnum, sr); ++ if (DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ DWC_DEBUGPL(DBG_PCDV, "Request queue empty!!\n"); ++ } else { ++ DWC_DEBUGPL(DBG_PCDV, "complete req!!\n"); ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len && ++ pcd->ep0state == EP0_OUT_DATA_PHASE) { ++ /* Read arrived setup packet from req->buf */ ++ dwc_memcpy(&pcd->setup_pkt->req, ++ req->buf + ep->dwc_ep.xfer_count, 8); ++ } ++ req->actual = ep->dwc_ep.xfer_count; ++ dwc_otg_request_done(ep, req, -ECONNRESET); ++ ep->dwc_ep.start_xfer_buff = 0; ++ ep->dwc_ep.xfer_buff = 0; ++ ep->dwc_ep.xfer_len = 0; ++ } ++ pcd->ep0state = EP0_IDLE; ++ if (doepint.b.setup) { ++ DWC_DEBUGPL(DBG_PCDV, "EP0_IDLE SR=1 setup=1\n"); ++ /* Data stage started, clear setup */ ++ CLEAR_OUT_EP_INTR(core_if, epnum, setup); ++ doepint.b.setup = 0; ++ handle_ep0(pcd); ++ /* Prepare for setup packets if ep0in was enabled*/ ++ if (pcd->ep0state == EP0_IN_STATUS_PHASE) { ++ ep0_out_start(core_if, pcd); ++ } ++ goto exit_xfercompl; ++ } else { ++ /* Prepare for more setup packets */ ++ DWC_DEBUGPL(DBG_PCDV, ++ "EP0_IDLE SR=1 setup=0 new setup comes 2\n"); ++ ep0_out_start(core_if, pcd); ++ } ++ } ++ } ++ } ++ if (core_if->dma_enable == 0 || pcd->ep0state != EP0_IDLE) ++ handle_ep0(pcd); ++exit_xfercompl: ++ DWC_DEBUGPL(DBG_PCDV, "DOEPINT=%x doepint=%x\n", ++ dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep), doepint.d32); ++ } else { ++ if (core_if->dma_desc_enable == 0 ++ || pcd->ep0state != EP0_IDLE) ++ handle_ep0(pcd); ++ } ++#ifdef DWC_EN_ISOC ++ } else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ if (doepint.b.pktdrpsts == 0) { ++ /* Clear the bit in DOEPINTn for this interrupt */ ++ CLEAR_OUT_EP_INTR(core_if, ++ epnum, ++ xfercompl); ++ complete_iso_ep(pcd, ep); ++ } else { ++ ++ doepint_data_t doepint = {.d32 = 0 }; ++ doepint.b.xfercompl = 1; ++ doepint.b.pktdrpsts = 1; ++ DWC_WRITE_REG32 ++ (&core_if->dev_if->out_ep_regs ++ [epnum]->doepint, ++ doepint.d32); ++ if (handle_iso_out_pkt_dropped ++ (core_if, dwc_ep)) { ++ complete_iso_ep(pcd, ++ ep); ++ } ++ } ++#endif /* DWC_EN_ISOC */ ++#ifdef DWC_UTE_PER_IO ++ } else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ CLEAR_OUT_EP_INTR(core_if, epnum, xfercompl); ++ if (!ep->stopped) ++ complete_xiso_ep(ep); ++#endif /* DWC_UTE_PER_IO */ ++ } else { ++ /* Clear the bit in DOEPINTn for this interrupt */ ++ CLEAR_OUT_EP_INTR(core_if, epnum, ++ xfercompl); ++ ++ if (core_if->core_params->dev_out_nak) { ++ DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[epnum]); ++ pcd->core_if->ep_xfer_info[epnum].state = 0; ++#ifdef DEBUG ++ print_memory_payload(pcd, dwc_ep); ++#endif ++ } ++ complete_ep(ep); ++ } ++ ++ } ++ ++ /* Endpoint disable */ ++ if (doepint.b.epdisabled) { ++ ++ /* Clear the bit in DOEPINTn for this interrupt */ ++ CLEAR_OUT_EP_INTR(core_if, epnum, epdisabled); ++ if (core_if->core_params->dev_out_nak) { ++#ifdef DEBUG ++ print_memory_payload(pcd, dwc_ep); ++#endif ++ /* In case of timeout condition */ ++ if (core_if->ep_xfer_info[epnum].state == 2) { ++ dctl.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ dev_global_regs->dctl); ++ dctl.b.cgoutnak = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, ++ dctl.d32); ++ /* Unmask goutnakeff interrupt which was masked ++ * during handle nak out interrupt */ ++ gintmsk.b.goutnakeff = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, ++ 0, gintmsk.d32); ++ ++ complete_ep(ep); ++ } ++ } ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) ++ { ++ dctl_data_t dctl; ++ gintmsk_data_t intr_mask = {.d32 = 0}; ++ dwc_otg_pcd_request_t *req = 0; ++ ++ dctl.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ dev_global_regs->dctl); ++ dctl.b.cgoutnak = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, ++ dctl.d32); ++ ++ intr_mask.d32 = 0; ++ intr_mask.b.incomplisoout = 1; ++ ++ /* Get any pending requests */ ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ if (!req) { ++ DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep); ++ } else { ++ dwc_otg_request_done(ep, req, 0); ++ start_next_request(ep); ++ } ++ } else { ++ DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep); ++ } ++ } ++ } ++ /* AHB Error */ ++ if (doepint.b.ahberr) { ++ DWC_ERROR("EP%d OUT AHB Error\n", epnum); ++ DWC_ERROR("EP%d DEPDMA=0x%08x \n", ++ epnum, core_if->dev_if->out_ep_regs[epnum]->doepdma); ++ CLEAR_OUT_EP_INTR(core_if, epnum, ahberr); ++ } ++ /* Setup Phase Done (contorl EPs) */ ++ if (doepint.b.setup) { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, "EP%d SETUP Done\n", epnum); ++#endif ++ CLEAR_OUT_EP_INTR(core_if, epnum, setup); ++ ++ handle_ep0(pcd); ++ } ++ ++ /** OUT EP BNA Intr */ ++ if (doepint.b.bna) { ++ CLEAR_OUT_EP_INTR(core_if, epnum, bna); ++ if (core_if->dma_desc_enable) { ++#ifdef DWC_EN_ISOC ++ if (dwc_ep->type == ++ DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * This checking is performed to prevent first "false" BNA ++ * handling occuring right after reconnect ++ */ ++ if (dwc_ep->next_frame != ++ 0xffffffff) ++ dwc_otg_pcd_handle_iso_bna(ep); ++ } else ++#endif /* DWC_EN_ISOC */ ++ { ++ dwc_otg_pcd_handle_noniso_bna(ep); ++ } ++ } ++ } ++ /* Babble Interrupt */ ++ if (doepint.b.babble) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d OUT Babble\n", ++ epnum); ++ handle_out_ep_babble_intr(pcd, epnum); ++ ++ CLEAR_OUT_EP_INTR(core_if, epnum, babble); ++ } ++ if (doepint.b.outtknepdis) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d OUT Token received when EP is \ ++ disabled\n",epnum); ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { ++ doepmsk_data_t doepmsk = {.d32 = 0}; ++ ep->dwc_ep.frame_num = core_if->frame_num; ++ if (ep->dwc_ep.bInterval > 1) { ++ depctl_data_t depctl; ++ depctl.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[epnum]->doepctl); ++ if (ep->dwc_ep.frame_num & 0x1) { ++ depctl.b.setd1pid = 1; ++ depctl.b.setd0pid = 0; ++ } else { ++ depctl.b.setd0pid = 1; ++ depctl.b.setd1pid = 0; ++ } ++ DWC_WRITE_REG32(&core_if->dev_if-> ++ out_ep_regs[epnum]->doepctl, depctl.d32); ++ } ++ start_next_request(ep); ++ doepmsk.b.outtknepdis = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk, ++ doepmsk.d32, 0); ++ } ++ CLEAR_OUT_EP_INTR(core_if, epnum, outtknepdis); ++ } ++ ++ /* NAK Interrutp */ ++ if (doepint.b.nak) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d OUT NAK\n", epnum); ++ handle_out_ep_nak_intr(pcd, epnum); ++ ++ CLEAR_OUT_EP_INTR(core_if, epnum, nak); ++ } ++ /* NYET Interrutp */ ++ if (doepint.b.nyet) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d OUT NYET\n", epnum); ++ handle_out_ep_nyet_intr(pcd, epnum); ++ ++ CLEAR_OUT_EP_INTR(core_if, epnum, nyet); ++ } ++ } ++ ++ epnum++; ++ ep_intr >>= 1; ++ } ++ ++ return 1; ++ ++#undef CLEAR_OUT_EP_INTR ++} ++static int drop_transfer(uint32_t trgt_fr, uint32_t curr_fr, uint8_t frm_overrun) ++{ ++ int retval = 0; ++ if(!frm_overrun && curr_fr >= trgt_fr) ++ retval = 1; ++ else if (frm_overrun ++ && (curr_fr >= trgt_fr && ((curr_fr - trgt_fr) < 0x3FFF / 2))) ++ retval = 1; ++ return retval; ++} ++/** ++ * Incomplete ISO IN Transfer Interrupt. ++ * This interrupt indicates one of the following conditions occurred ++ * while transmitting an ISOC transaction. ++ * - Corrupted IN Token for ISOC EP. ++ * - Packet not complete in FIFO. ++ * The follow actions will be taken: ++ * -# Determine the EP ++ * -# Set incomplete flag in dwc_ep structure ++ * -# Disable EP; when "Endpoint Disabled" interrupt is received ++ * Flush FIFO ++ */ ++int32_t dwc_otg_pcd_handle_incomplete_isoc_in_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintsts_data_t gintsts; ++ ++#ifdef DWC_EN_ISOC ++ dwc_otg_dev_if_t *dev_if; ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ dsts_data_t dsts = {.d32 = 0 }; ++ dwc_ep_t *dwc_ep; ++ int i; ++ ++ dev_if = GET_CORE_IF(pcd)->dev_if; ++ ++ for (i = 1; i <= dev_if->num_in_eps; ++i) { ++ dwc_ep = &pcd->in_ep[i].dwc_ep; ++ if (dwc_ep->active && dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ deptsiz.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz); ++ depctl.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ ++ if (depctl.b.epdis && deptsiz.d32) { ++ set_current_pkt_info(GET_CORE_IF(pcd), dwc_ep); ++ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { ++ dwc_ep->cur_pkt = 0; ++ dwc_ep->proc_buf_num = ++ (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ ++ if (dwc_ep->proc_buf_num) { ++ dwc_ep->cur_pkt_addr = ++ dwc_ep->xfer_buff1; ++ dwc_ep->cur_pkt_dma_addr = ++ dwc_ep->dma_addr1; ++ } else { ++ dwc_ep->cur_pkt_addr = ++ dwc_ep->xfer_buff0; ++ dwc_ep->cur_pkt_dma_addr = ++ dwc_ep->dma_addr0; ++ } ++ ++ } ++ ++ dsts.d32 = ++ DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if-> ++ dev_global_regs->dsts); ++ dwc_ep->next_frame = dsts.b.soffn; ++ ++ dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF ++ (pcd), ++ dwc_ep); ++ } ++ } ++ } ++ ++#else ++ depctl_data_t depctl = {.d32 = 0 }; ++ dwc_ep_t *dwc_ep; ++ dwc_otg_dev_if_t *dev_if; ++ int i; ++ dev_if = GET_CORE_IF(pcd)->dev_if; ++ ++ DWC_DEBUGPL(DBG_PCD,"Incomplete ISO IN \n"); ++ ++ for (i = 1; i <= dev_if->num_in_eps; ++i) { ++ dwc_ep = &pcd->in_ep[i-1].dwc_ep; ++ depctl.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ if (depctl.b.epena && dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ if (drop_transfer(dwc_ep->frame_num, GET_CORE_IF(pcd)->frame_num, ++ dwc_ep->frm_overrun)) ++ { ++ depctl.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ depctl.b.snak = 1; ++ depctl.b.epdis = 1; ++ DWC_MODIFY_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32, depctl.d32); ++ } ++ } ++ } ++ ++ /*intr_mask.b.incomplisoin = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); */ ++#endif //DWC_EN_ISOC ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.incomplisoin = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * Incomplete ISO OUT Transfer Interrupt. ++ * ++ * This interrupt indicates that the core has dropped an ISO OUT ++ * packet. The following conditions can be the cause: ++ * - FIFO Full, the entire packet would not fit in the FIFO. ++ * - CRC Error ++ * - Corrupted Token ++ * The follow actions will be taken: ++ * -# Determine the EP ++ * -# Set incomplete flag in dwc_ep structure ++ * -# Read any data from the FIFO ++ * -# Disable EP. When "Endpoint Disabled" interrupt is received ++ * re-enable EP. ++ */ ++int32_t dwc_otg_pcd_handle_incomplete_isoc_out_intr(dwc_otg_pcd_t * pcd) ++{ ++ ++ gintsts_data_t gintsts; ++ ++#ifdef DWC_EN_ISOC ++ dwc_otg_dev_if_t *dev_if; ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ dsts_data_t dsts = {.d32 = 0 }; ++ dwc_ep_t *dwc_ep; ++ int i; ++ ++ dev_if = GET_CORE_IF(pcd)->dev_if; ++ ++ for (i = 1; i <= dev_if->num_out_eps; ++i) { ++ dwc_ep = &pcd->in_ep[i].dwc_ep; ++ if (pcd->out_ep[i].dwc_ep.active && ++ pcd->out_ep[i].dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { ++ deptsiz.d32 = ++ DWC_READ_REG32(&dev_if->out_ep_regs[i]->doeptsiz); ++ depctl.d32 = ++ DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl); ++ ++ if (depctl.b.epdis && deptsiz.d32) { ++ set_current_pkt_info(GET_CORE_IF(pcd), ++ &pcd->out_ep[i].dwc_ep); ++ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { ++ dwc_ep->cur_pkt = 0; ++ dwc_ep->proc_buf_num = ++ (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ ++ if (dwc_ep->proc_buf_num) { ++ dwc_ep->cur_pkt_addr = ++ dwc_ep->xfer_buff1; ++ dwc_ep->cur_pkt_dma_addr = ++ dwc_ep->dma_addr1; ++ } else { ++ dwc_ep->cur_pkt_addr = ++ dwc_ep->xfer_buff0; ++ dwc_ep->cur_pkt_dma_addr = ++ dwc_ep->dma_addr0; ++ } ++ ++ } ++ ++ dsts.d32 = ++ DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if-> ++ dev_global_regs->dsts); ++ dwc_ep->next_frame = dsts.b.soffn; ++ ++ dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF ++ (pcd), ++ dwc_ep); ++ } ++ } ++ } ++#else ++ /** @todo implement ISR */ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ dwc_otg_core_if_t *core_if; ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ dctl_data_t dctl = {.d32 = 0 }; ++ dwc_ep_t *dwc_ep = NULL; ++ int i; ++ core_if = GET_CORE_IF(pcd); ++ ++ for (i = 0; i < core_if->dev_if->num_out_eps; ++i) { ++ dwc_ep = &pcd->out_ep[i].dwc_ep; ++ depctl.d32 = ++ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl); ++ if (depctl.b.epena && depctl.b.dpid == (core_if->frame_num & 0x1)) { ++ core_if->dev_if->isoc_ep = dwc_ep; ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz); ++ break; ++ } ++ } ++ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ intr_mask.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); ++ ++ if (!intr_mask.b.goutnakeff) { ++ /* Unmask it */ ++ intr_mask.b.goutnakeff = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, intr_mask.d32); ++ } ++ if (!gintsts.b.goutnakeff) { ++ dctl.b.sgoutnak = 1; ++ } ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32); ++ ++ depctl.d32 = DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl); ++ if (depctl.b.epena) { ++ depctl.b.epdis = 1; ++ depctl.b.snak = 1; ++ } ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl, depctl.d32); ++ ++ intr_mask.d32 = 0; ++ intr_mask.b.incomplisoout = 1; ++ ++#endif /* DWC_EN_ISOC */ ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.incomplisoout = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This function handles the Global IN NAK Effective interrupt. ++ * ++ */ ++int32_t dwc_otg_pcd_handle_in_nak_effective(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; ++ depctl_data_t diepctl = {.d32 = 0 }; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ int i; ++ ++ DWC_DEBUGPL(DBG_PCD, "Global IN NAK Effective\n"); ++ ++ /* Disable all active IN EPs */ ++ for (i = 0; i <= dev_if->num_in_eps; i++) { ++ diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ if (!(diepctl.b.eptype & 1) && diepctl.b.epena) { ++ if (core_if->start_predict > 0) ++ core_if->start_predict++; ++ diepctl.b.epdis = 1; ++ diepctl.b.snak = 1; ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, diepctl.d32); ++ } ++ } ++ ++ ++ /* Disable the Global IN NAK Effective Interrupt */ ++ intr_mask.b.ginnakeff = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.ginnakeff = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * OUT NAK Effective. ++ * ++ */ ++int32_t dwc_otg_pcd_handle_out_nak_effective(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ depctl_data_t doepctl; ++ int i; ++ ++ /* Disable the Global OUT NAK Effective Interrupt */ ++ intr_mask.b.goutnakeff = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* If DEV OUT NAK enabled*/ ++ if (pcd->core_if->core_params->dev_out_nak) { ++ /* Run over all out endpoints to determine the ep number on ++ * which the timeout has happened ++ */ ++ for (i = 0; i <= dev_if->num_out_eps; i++) { ++ if ( pcd->core_if->ep_xfer_info[i].state == 2 ) ++ break; ++ } ++ if (i > dev_if->num_out_eps) { ++ dctl_data_t dctl; ++ dctl.d32 = ++ DWC_READ_REG32(&dev_if->dev_global_regs->dctl); ++ dctl.b.cgoutnak = 1; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->dctl, ++ dctl.d32); ++ goto out; ++ } ++ ++ /* Disable the endpoint */ ++ doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl); ++ if (doepctl.b.epena) { ++ doepctl.b.epdis = 1; ++ doepctl.b.snak = 1; ++ } ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, doepctl.d32); ++ return 1; ++ } ++ /* We come here from Incomplete ISO OUT handler */ ++ if (dev_if->isoc_ep) { ++ dwc_ep_t *dwc_ep = (dwc_ep_t *)dev_if->isoc_ep; ++ uint32_t epnum = dwc_ep->num; ++ doepint_data_t doepint; ++ doepint.d32 = ++ DWC_READ_REG32(&dev_if->out_ep_regs[dwc_ep->num]->doepint); ++ dev_if->isoc_ep = NULL; ++ doepctl.d32 = ++ DWC_READ_REG32(&dev_if->out_ep_regs[epnum]->doepctl); ++ DWC_PRINTF("Before disable DOEPCTL = %08x\n", doepctl.d32); ++ if (doepctl.b.epena) { ++ doepctl.b.epdis = 1; ++ doepctl.b.snak = 1; ++ } ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[epnum]->doepctl, ++ doepctl.d32); ++ return 1; ++ } else ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", ++ "Global OUT NAK Effective\n"); ++ ++out: ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.goutnakeff = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * PCD interrupt handler. ++ * ++ * The PCD handles the device interrupts. Many conditions can cause a ++ * device interrupt. When an interrupt occurs, the device interrupt ++ * service routine determines the cause of the interrupt and ++ * dispatches handling to the appropriate function. These interrupt ++ * handling functions are described below. ++ * ++ * All interrupt registers are processed from LSB to MSB. ++ * ++ */ ++int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++#ifdef VERBOSE ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++#endif ++ gintsts_data_t gintr_status; ++ int32_t retval = 0; ++ ++ /* Exit from ISR if core is hibernated */ ++ if (core_if->hibernation_suspend == 1) { ++ return retval; ++ } ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_ANY, "%s() gintsts=%08x gintmsk=%08x\n", ++ __func__, ++ DWC_READ_REG32(&global_regs->gintsts), ++ DWC_READ_REG32(&global_regs->gintmsk)); ++#endif ++ ++ if (dwc_otg_is_device_mode(core_if)) { ++ DWC_SPINLOCK(pcd->lock); ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%08x gintmsk=%08x\n", ++ __func__, ++ DWC_READ_REG32(&global_regs->gintsts), ++ DWC_READ_REG32(&global_regs->gintmsk)); ++#endif ++ ++ gintr_status.d32 = dwc_otg_read_core_intr(core_if); ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s: gintsts&gintmsk=%08x\n", ++ __func__, gintr_status.d32); ++ ++ if (gintr_status.b.sofintr) { ++ retval |= dwc_otg_pcd_handle_sof_intr(pcd); ++ } ++ if (gintr_status.b.rxstsqlvl) { ++ retval |= ++ dwc_otg_pcd_handle_rx_status_q_level_intr(pcd); ++ } ++ if (gintr_status.b.nptxfempty) { ++ retval |= dwc_otg_pcd_handle_np_tx_fifo_empty_intr(pcd); ++ } ++ if (gintr_status.b.goutnakeff) { ++ retval |= dwc_otg_pcd_handle_out_nak_effective(pcd); ++ } ++ if (gintr_status.b.i2cintr) { ++ retval |= dwc_otg_pcd_handle_i2c_intr(pcd); ++ } ++ if (gintr_status.b.erlysuspend) { ++ retval |= dwc_otg_pcd_handle_early_suspend_intr(pcd); ++ } ++ if (gintr_status.b.usbreset) { ++ retval |= dwc_otg_pcd_handle_usb_reset_intr(pcd); ++ } ++ if (gintr_status.b.enumdone) { ++ retval |= dwc_otg_pcd_handle_enum_done_intr(pcd); ++ } ++ if (gintr_status.b.isooutdrop) { ++ retval |= ++ dwc_otg_pcd_handle_isoc_out_packet_dropped_intr ++ (pcd); ++ } ++ if (gintr_status.b.eopframe) { ++ retval |= ++ dwc_otg_pcd_handle_end_periodic_frame_intr(pcd); ++ } ++ if (gintr_status.b.inepint) { ++ if (!core_if->multiproc_int_enable) { ++ retval |= dwc_otg_pcd_handle_in_ep_intr(pcd); ++ } ++ } ++ if (gintr_status.b.outepintr) { ++ if (!core_if->multiproc_int_enable) { ++ retval |= dwc_otg_pcd_handle_out_ep_intr(pcd); ++ } ++ } ++ if (gintr_status.b.epmismatch) { ++ retval |= dwc_otg_pcd_handle_ep_mismatch_intr(pcd); ++ } ++ if (gintr_status.b.fetsusp) { ++ retval |= dwc_otg_pcd_handle_ep_fetsusp_intr(pcd); ++ } ++ if (gintr_status.b.ginnakeff) { ++ retval |= dwc_otg_pcd_handle_in_nak_effective(pcd); ++ } ++ if (gintr_status.b.incomplisoin) { ++ retval |= ++ dwc_otg_pcd_handle_incomplete_isoc_in_intr(pcd); ++ } ++ if (gintr_status.b.incomplisoout) { ++ retval |= ++ dwc_otg_pcd_handle_incomplete_isoc_out_intr(pcd); ++ } ++ ++ /* In MPI mode Device Endpoints interrupts are asserted ++ * without setting outepintr and inepint bits set, so these ++ * Interrupt handlers are called without checking these bit-fields ++ */ ++ if (core_if->multiproc_int_enable) { ++ retval |= dwc_otg_pcd_handle_in_ep_intr(pcd); ++ retval |= dwc_otg_pcd_handle_out_ep_intr(pcd); ++ } ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%0x\n", __func__, ++ DWC_READ_REG32(&global_regs->gintsts)); ++#endif ++ DWC_SPINUNLOCK(pcd->lock); ++ } ++ return retval; ++} ++ ++#endif /* DWC_HOST_ONLY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c +@@ -0,0 +1,1358 @@ ++ /* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_linux.c $ ++ * $Revision: #21 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_HOST_ONLY ++ ++/** @file ++ * This file implements the Peripheral Controller Driver. ++ * ++ * The Peripheral Controller Driver (PCD) is responsible for ++ * translating requests from the Function Driver into the appropriate ++ * actions on the DWC_otg controller. It isolates the Function Driver ++ * from the specifics of the controller by providing an API to the ++ * Function Driver. ++ * ++ * The Peripheral Controller Driver for Linux will implement the ++ * Gadget API, so that the existing Gadget drivers can be used. ++ * (Gadget Driver is the Linux terminology for a Function Driver.) ++ * ++ * The Linux Gadget API is defined in the header file ++ * <code><linux/usb_gadget.h></code>. The USB EP operations API is ++ * defined in the structure <code>usb_ep_ops</code> and the USB ++ * Controller API is defined in the structure ++ * <code>usb_gadget_ops</code>. ++ * ++ */ ++ ++#include "dwc_otg_os_dep.h" ++#include "dwc_otg_pcd_if.h" ++#include "dwc_otg_pcd.h" ++#include "dwc_otg_driver.h" ++#include "dwc_otg_dbg.h" ++ ++static struct gadget_wrapper { ++ dwc_otg_pcd_t *pcd; ++ ++ struct usb_gadget gadget; ++ struct usb_gadget_driver *driver; ++ ++ struct usb_ep ep0; ++ struct usb_ep in_ep[16]; ++ struct usb_ep out_ep[16]; ++ ++} *gadget_wrapper; ++ ++/* Display the contents of the buffer */ ++extern void dump_msg(const u8 * buf, unsigned int length); ++/** ++ * Get the dwc_otg_pcd_ep_t* from usb_ep* pointer - NULL in case ++ * if the endpoint is not found ++ */ ++static struct dwc_otg_pcd_ep *ep_from_handle(dwc_otg_pcd_t * pcd, void *handle) ++{ ++ int i; ++ if (pcd->ep0.priv == handle) { ++ return &pcd->ep0; ++ } ++ ++ for (i = 0; i < MAX_EPS_CHANNELS - 1; i++) { ++ if (pcd->in_ep[i].priv == handle) ++ return &pcd->in_ep[i]; ++ if (pcd->out_ep[i].priv == handle) ++ return &pcd->out_ep[i]; ++ } ++ ++ return NULL; ++} ++ ++/* USB Endpoint Operations */ ++/* ++ * The following sections briefly describe the behavior of the Gadget ++ * API endpoint operations implemented in the DWC_otg driver ++ * software. Detailed descriptions of the generic behavior of each of ++ * these functions can be found in the Linux header file ++ * include/linux/usb_gadget.h. ++ * ++ * The Gadget API provides wrapper functions for each of the function ++ * pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper ++ * function, which then calls the underlying PCD function. The ++ * following sections are named according to the wrapper ++ * functions. Within each section, the corresponding DWC_otg PCD ++ * function name is specified. ++ * ++ */ ++ ++/** ++ * This function is called by the Gadget Driver for each EP to be ++ * configured for the current configuration (SET_CONFIGURATION). ++ * ++ * This function initializes the dwc_otg_ep_t data structure, and then ++ * calls dwc_otg_ep_activate. ++ */ ++static int ep_enable(struct usb_ep *usb_ep, ++ const struct usb_endpoint_descriptor *ep_desc) ++{ ++ int retval; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, usb_ep, ep_desc); ++ ++ if (!usb_ep || !ep_desc || ep_desc->bDescriptorType != USB_DT_ENDPOINT) { ++ DWC_WARN("%s, bad ep or descriptor\n", __func__); ++ return -EINVAL; ++ } ++ if (usb_ep == &gadget_wrapper->ep0) { ++ DWC_WARN("%s, bad ep(0)\n", __func__); ++ return -EINVAL; ++ } ++ ++ /* Check FIFO size? */ ++ if (!ep_desc->wMaxPacketSize) { ++ DWC_WARN("%s, bad %s maxpacket\n", __func__, usb_ep->name); ++ return -ERANGE; ++ } ++ ++ if (!gadget_wrapper->driver || ++ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) { ++ DWC_WARN("%s, bogus device state\n", __func__); ++ return -ESHUTDOWN; ++ } ++ ++ /* Delete after check - MAS */ ++#if 0 ++ nat = (uint32_t) ep_desc->wMaxPacketSize; ++ printk(KERN_ALERT "%s: nat (before) =%d\n", __func__, nat); ++ nat = (nat >> 11) & 0x03; ++ printk(KERN_ALERT "%s: nat (after) =%d\n", __func__, nat); ++#endif ++ retval = dwc_otg_pcd_ep_enable(gadget_wrapper->pcd, ++ (const uint8_t *)ep_desc, ++ (void *)usb_ep); ++ if (retval) { ++ DWC_WARN("dwc_otg_pcd_ep_enable failed\n"); ++ return -EINVAL; ++ } ++ ++ usb_ep->maxpacket = le16_to_cpu(ep_desc->wMaxPacketSize); ++ ++ return 0; ++} ++ ++/** ++ * This function is called when an EP is disabled due to disconnect or ++ * change in configuration. Any pending requests will terminate with a ++ * status of -ESHUTDOWN. ++ * ++ * This function modifies the dwc_otg_ep_t data structure for this EP, ++ * and then calls dwc_otg_ep_deactivate. ++ */ ++static int ep_disable(struct usb_ep *usb_ep) ++{ ++ int retval; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, usb_ep); ++ if (!usb_ep) { ++ DWC_DEBUGPL(DBG_PCD, "%s, %s not enabled\n", __func__, ++ usb_ep ? usb_ep->name : NULL); ++ return -EINVAL; ++ } ++ ++ retval = dwc_otg_pcd_ep_disable(gadget_wrapper->pcd, usb_ep); ++ if (retval) { ++ retval = -EINVAL; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function allocates a request object to use with the specified ++ * endpoint. ++ * ++ * @param ep The endpoint to be used with with the request ++ * @param gfp_flags the GFP_* flags to use. ++ */ ++static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *ep, ++ gfp_t gfp_flags) ++{ ++ struct usb_request *usb_req; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%d)\n", __func__, ep, gfp_flags); ++ if (0 == ep) { ++ DWC_WARN("%s() %s\n", __func__, "Invalid EP!\n"); ++ return 0; ++ } ++ usb_req = kmalloc(sizeof(*usb_req), gfp_flags); ++ if (0 == usb_req) { ++ DWC_WARN("%s() %s\n", __func__, "request allocation failed!\n"); ++ return 0; ++ } ++ memset(usb_req, 0, sizeof(*usb_req)); ++ usb_req->dma = DWC_DMA_ADDR_INVALID; ++ ++ return usb_req; ++} ++ ++/** ++ * This function frees a request object. ++ * ++ * @param ep The endpoint associated with the request ++ * @param req The request being freed ++ */ ++static void dwc_otg_pcd_free_request(struct usb_ep *ep, struct usb_request *req) ++{ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, ep, req); ++ ++ if (0 == ep || 0 == req) { ++ DWC_WARN("%s() %s\n", __func__, ++ "Invalid ep or req argument!\n"); ++ return; ++ } ++ ++ kfree(req); ++} ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++/** ++ * This function allocates an I/O buffer to be used for a transfer ++ * to/from the specified endpoint. ++ * ++ * @param usb_ep The endpoint to be used with with the request ++ * @param bytes The desired number of bytes for the buffer ++ * @param dma Pointer to the buffer's DMA address; must be valid ++ * @param gfp_flags the GFP_* flags to use. ++ * @return address of a new buffer or null is buffer could not be allocated. ++ */ ++static void *dwc_otg_pcd_alloc_buffer(struct usb_ep *usb_ep, unsigned bytes, ++ dma_addr_t * dma, gfp_t gfp_flags) ++{ ++ void *buf; ++ dwc_otg_pcd_t *pcd = 0; ++ ++ pcd = gadget_wrapper->pcd; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%d,%p,%0x)\n", __func__, usb_ep, bytes, ++ dma, gfp_flags); ++ ++ /* Check dword alignment */ ++ if ((bytes & 0x3UL) != 0) { ++ DWC_WARN("%s() Buffer size is not a multiple of" ++ "DWORD size (%d)", __func__, bytes); ++ } ++ ++ buf = dma_alloc_coherent(NULL, bytes, dma, gfp_flags); ++ ++ /* Check dword alignment */ ++ if (((int)buf & 0x3UL) != 0) { ++ DWC_WARN("%s() Buffer is not DWORD aligned (%p)", ++ __func__, buf); ++ } ++ ++ return buf; ++} ++ ++/** ++ * This function frees an I/O buffer that was allocated by alloc_buffer. ++ * ++ * @param usb_ep the endpoint associated with the buffer ++ * @param buf address of the buffer ++ * @param dma The buffer's DMA address ++ * @param bytes The number of bytes of the buffer ++ */ ++static void dwc_otg_pcd_free_buffer(struct usb_ep *usb_ep, void *buf, ++ dma_addr_t dma, unsigned bytes) ++{ ++ dwc_otg_pcd_t *pcd = 0; ++ ++ pcd = gadget_wrapper->pcd; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%0x,%d)\n", __func__, buf, dma, bytes); ++ ++ dma_free_coherent(NULL, bytes, buf, dma); ++} ++#endif ++ ++/** ++ * This function is used to submit an I/O Request to an EP. ++ * ++ * - When the request completes the request's completion callback ++ * is called to return the request to the driver. ++ * - An EP, except control EPs, may have multiple requests ++ * pending. ++ * - Once submitted the request cannot be examined or modified. ++ * - Each request is turned into one or more packets. ++ * - A BULK EP can queue any amount of data; the transfer is ++ * packetized. ++ * - Zero length Packets are specified with the request 'zero' ++ * flag. ++ */ ++static int ep_queue(struct usb_ep *usb_ep, struct usb_request *usb_req, ++ gfp_t gfp_flags) ++{ ++ dwc_otg_pcd_t *pcd; ++ struct dwc_otg_pcd_ep *ep = NULL; ++ int retval = 0, is_isoc_ep = 0; ++ dma_addr_t dma_addr = DWC_DMA_ADDR_INVALID; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p,%d)\n", ++ __func__, usb_ep, usb_req, gfp_flags); ++ ++ if (!usb_req || !usb_req->complete || !usb_req->buf) { ++ DWC_WARN("bad params\n"); ++ return -EINVAL; ++ } ++ ++ if (!usb_ep) { ++ DWC_WARN("bad ep\n"); ++ return -EINVAL; ++ } ++ ++ pcd = gadget_wrapper->pcd; ++ if (!gadget_wrapper->driver || ++ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) { ++ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", ++ gadget_wrapper->gadget.speed); ++ DWC_WARN("bogus device state\n"); ++ return -ESHUTDOWN; ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "%s queue req %p, len %d buf %p\n", ++ usb_ep->name, usb_req, usb_req->length, usb_req->buf); ++ ++ usb_req->status = -EINPROGRESS; ++ usb_req->actual = 0; ++ ++ ep = ep_from_handle(pcd, usb_ep); ++ if (ep == NULL) ++ is_isoc_ep = 0; ++ else ++ is_isoc_ep = (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) ? 1 : 0; ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++ dma_addr = usb_req->dma; ++#else ++ if (GET_CORE_IF(pcd)->dma_enable) { ++ dwc_otg_device_t *otg_dev = gadget_wrapper->pcd->otg_dev; ++ struct device *dev = NULL; ++ ++ if (otg_dev != NULL) ++ dev = DWC_OTG_OS_GETDEV(otg_dev->os_dep); ++ ++ if (usb_req->length != 0 && ++ usb_req->dma == DWC_DMA_ADDR_INVALID) { ++ dma_addr = dma_map_single(dev, usb_req->buf, ++ usb_req->length, ++ ep->dwc_ep.is_in ? ++ DMA_TO_DEVICE: ++ DMA_FROM_DEVICE); ++ } ++ } ++#endif ++ ++#ifdef DWC_UTE_PER_IO ++ if (is_isoc_ep == 1) { ++ retval = dwc_otg_pcd_xiso_ep_queue(pcd, usb_ep, usb_req->buf, dma_addr, ++ usb_req->length, usb_req->zero, usb_req, ++ gfp_flags == GFP_ATOMIC ? 1 : 0, &usb_req->ext_req); ++ if (retval) ++ return -EINVAL; ++ ++ return 0; ++ } ++#endif ++ retval = dwc_otg_pcd_ep_queue(pcd, usb_ep, usb_req->buf, dma_addr, ++ usb_req->length, usb_req->zero, usb_req, ++ gfp_flags == GFP_ATOMIC ? 1 : 0); ++ if (retval) { ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/** ++ * This function cancels an I/O request from an EP. ++ */ ++static int ep_dequeue(struct usb_ep *usb_ep, struct usb_request *usb_req) ++{ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, usb_ep, usb_req); ++ ++ if (!usb_ep || !usb_req) { ++ DWC_WARN("bad argument\n"); ++ return -EINVAL; ++ } ++ if (!gadget_wrapper->driver || ++ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) { ++ DWC_WARN("bogus device state\n"); ++ return -ESHUTDOWN; ++ } ++ if (dwc_otg_pcd_ep_dequeue(gadget_wrapper->pcd, usb_ep, usb_req)) { ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/** ++ * usb_ep_set_halt stalls an endpoint. ++ * ++ * usb_ep_clear_halt clears an endpoint halt and resets its data ++ * toggle. ++ * ++ * Both of these functions are implemented with the same underlying ++ * function. The behavior depends on the value argument. ++ * ++ * @param[in] usb_ep the Endpoint to halt or clear halt. ++ * @param[in] value ++ * - 0 means clear_halt. ++ * - 1 means set_halt, ++ * - 2 means clear stall lock flag. ++ * - 3 means set stall lock flag. ++ */ ++static int ep_halt(struct usb_ep *usb_ep, int value) ++{ ++ int retval = 0; ++ ++ DWC_DEBUGPL(DBG_PCD, "HALT %s %d\n", usb_ep->name, value); ++ ++ if (!usb_ep) { ++ DWC_WARN("bad ep\n"); ++ return -EINVAL; ++ } ++ ++ retval = dwc_otg_pcd_ep_halt(gadget_wrapper->pcd, usb_ep, value); ++ if (retval == -DWC_E_AGAIN) { ++ return -EAGAIN; ++ } else if (retval) { ++ retval = -EINVAL; ++ } ++ ++ return retval; ++} ++ ++//#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)) ++#if 0 ++/** ++ * ep_wedge: sets the halt feature and ignores clear requests ++ * ++ * @usb_ep: the endpoint being wedged ++ * ++ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT) ++ * requests. If the gadget driver clears the halt status, it will ++ * automatically unwedge the endpoint. ++ * ++ * Returns zero on success, else negative errno. * ++ * Check usb_ep_set_wedge() at "usb_gadget.h" for details ++ */ ++static int ep_wedge(struct usb_ep *usb_ep) ++{ ++ int retval = 0; ++ ++ DWC_DEBUGPL(DBG_PCD, "WEDGE %s\n", usb_ep->name); ++ ++ if (!usb_ep) { ++ DWC_WARN("bad ep\n"); ++ return -EINVAL; ++ } ++ ++ retval = dwc_otg_pcd_ep_wedge(gadget_wrapper->pcd, usb_ep); ++ if (retval == -DWC_E_AGAIN) { ++ retval = -EAGAIN; ++ } else if (retval) { ++ retval = -EINVAL; ++ } ++ ++ return retval; ++} ++#endif ++ ++#ifdef DWC_EN_ISOC ++/** ++ * This function is used to submit an ISOC Transfer Request to an EP. ++ * ++ * - Every time a sync period completes the request's completion callback ++ * is called to provide data to the gadget driver. ++ * - Once submitted the request cannot be modified. ++ * - Each request is turned into periodic data packets untill ISO ++ * Transfer is stopped.. ++ */ ++static int iso_ep_start(struct usb_ep *usb_ep, struct usb_iso_request *req, ++ gfp_t gfp_flags) ++{ ++ int retval = 0; ++ ++ if (!req || !req->process_buffer || !req->buf0 || !req->buf1) { ++ DWC_WARN("bad params\n"); ++ return -EINVAL; ++ } ++ ++ if (!usb_ep) { ++ DWC_PRINTF("bad params\n"); ++ return -EINVAL; ++ } ++ ++ req->status = -EINPROGRESS; ++ ++ retval = ++ dwc_otg_pcd_iso_ep_start(gadget_wrapper->pcd, usb_ep, req->buf0, ++ req->buf1, req->dma0, req->dma1, ++ req->sync_frame, req->data_pattern_frame, ++ req->data_per_frame, ++ req-> ++ flags & USB_REQ_ISO_ASAP ? -1 : ++ req->start_frame, req->buf_proc_intrvl, ++ req, gfp_flags == GFP_ATOMIC ? 1 : 0); ++ ++ if (retval) { ++ return -EINVAL; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function stops ISO EP Periodic Data Transfer. ++ */ ++static int iso_ep_stop(struct usb_ep *usb_ep, struct usb_iso_request *req) ++{ ++ int retval = 0; ++ if (!usb_ep) { ++ DWC_WARN("bad ep\n"); ++ } ++ ++ if (!gadget_wrapper->driver || ++ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) { ++ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", ++ gadget_wrapper->gadget.speed); ++ DWC_WARN("bogus device state\n"); ++ } ++ ++ dwc_otg_pcd_iso_ep_stop(gadget_wrapper->pcd, usb_ep, req); ++ if (retval) { ++ retval = -EINVAL; ++ } ++ ++ return retval; ++} ++ ++static struct usb_iso_request *alloc_iso_request(struct usb_ep *ep, ++ int packets, gfp_t gfp_flags) ++{ ++ struct usb_iso_request *pReq = NULL; ++ uint32_t req_size; ++ ++ req_size = sizeof(struct usb_iso_request); ++ req_size += ++ (2 * packets * (sizeof(struct usb_gadget_iso_packet_descriptor))); ++ ++ pReq = kmalloc(req_size, gfp_flags); ++ if (!pReq) { ++ DWC_WARN("Can't allocate Iso Request\n"); ++ return 0; ++ } ++ pReq->iso_packet_desc0 = (void *)(pReq + 1); ++ ++ pReq->iso_packet_desc1 = pReq->iso_packet_desc0 + packets; ++ ++ return pReq; ++} ++ ++static void free_iso_request(struct usb_ep *ep, struct usb_iso_request *req) ++{ ++ kfree(req); ++} ++ ++static struct usb_isoc_ep_ops dwc_otg_pcd_ep_ops = { ++ .ep_ops = { ++ .enable = ep_enable, ++ .disable = ep_disable, ++ ++ .alloc_request = dwc_otg_pcd_alloc_request, ++ .free_request = dwc_otg_pcd_free_request, ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++ .alloc_buffer = dwc_otg_pcd_alloc_buffer, ++ .free_buffer = dwc_otg_pcd_free_buffer, ++#endif ++ ++ .queue = ep_queue, ++ .dequeue = ep_dequeue, ++ ++ .set_halt = ep_halt, ++ .fifo_status = 0, ++ .fifo_flush = 0, ++ }, ++ .iso_ep_start = iso_ep_start, ++ .iso_ep_stop = iso_ep_stop, ++ .alloc_iso_request = alloc_iso_request, ++ .free_iso_request = free_iso_request, ++}; ++ ++#else ++ ++ int (*enable) (struct usb_ep *ep, ++ const struct usb_endpoint_descriptor *desc); ++ int (*disable) (struct usb_ep *ep); ++ ++ struct usb_request *(*alloc_request) (struct usb_ep *ep, ++ gfp_t gfp_flags); ++ void (*free_request) (struct usb_ep *ep, struct usb_request *req); ++ ++ int (*queue) (struct usb_ep *ep, struct usb_request *req, ++ gfp_t gfp_flags); ++ int (*dequeue) (struct usb_ep *ep, struct usb_request *req); ++ ++ int (*set_halt) (struct usb_ep *ep, int value); ++ int (*set_wedge) (struct usb_ep *ep); ++ ++ int (*fifo_status) (struct usb_ep *ep); ++ void (*fifo_flush) (struct usb_ep *ep); ++static struct usb_ep_ops dwc_otg_pcd_ep_ops = { ++ .enable = ep_enable, ++ .disable = ep_disable, ++ ++ .alloc_request = dwc_otg_pcd_alloc_request, ++ .free_request = dwc_otg_pcd_free_request, ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++ .alloc_buffer = dwc_otg_pcd_alloc_buffer, ++ .free_buffer = dwc_otg_pcd_free_buffer, ++#else ++ /* .set_wedge = ep_wedge, */ ++ .set_wedge = NULL, /* uses set_halt instead */ ++#endif ++ ++ .queue = ep_queue, ++ .dequeue = ep_dequeue, ++ ++ .set_halt = ep_halt, ++ .fifo_status = 0, ++ .fifo_flush = 0, ++ ++}; ++ ++#endif /* _EN_ISOC_ */ ++/* Gadget Operations */ ++/** ++ * The following gadget operations will be implemented in the DWC_otg ++ * PCD. Functions in the API that are not described below are not ++ * implemented. ++ * ++ * The Gadget API provides wrapper functions for each of the function ++ * pointers defined in usb_gadget_ops. The Gadget Driver calls the ++ * wrapper function, which then calls the underlying PCD function. The ++ * following sections are named according to the wrapper functions ++ * (except for ioctl, which doesn't have a wrapper function). Within ++ * each section, the corresponding DWC_otg PCD function name is ++ * specified. ++ * ++ */ ++ ++/** ++ *Gets the USB Frame number of the last SOF. ++ */ ++static int get_frame_number(struct usb_gadget *gadget) ++{ ++ struct gadget_wrapper *d; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, gadget); ++ ++ if (gadget == 0) { ++ return -ENODEV; ++ } ++ ++ d = container_of(gadget, struct gadget_wrapper, gadget); ++ return dwc_otg_pcd_get_frame_number(d->pcd); ++} ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++static int test_lpm_enabled(struct usb_gadget *gadget) ++{ ++ struct gadget_wrapper *d; ++ ++ d = container_of(gadget, struct gadget_wrapper, gadget); ++ ++ return dwc_otg_pcd_is_lpm_enabled(d->pcd); ++} ++#endif ++ ++/** ++ * Initiates Session Request Protocol (SRP) to wakeup the host if no ++ * session is in progress. If a session is already in progress, but ++ * the device is suspended, remote wakeup signaling is started. ++ * ++ */ ++static int wakeup(struct usb_gadget *gadget) ++{ ++ struct gadget_wrapper *d; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, gadget); ++ ++ if (gadget == 0) { ++ return -ENODEV; ++ } else { ++ d = container_of(gadget, struct gadget_wrapper, gadget); ++ } ++ dwc_otg_pcd_wakeup(d->pcd); ++ return 0; ++} ++ ++static const struct usb_gadget_ops dwc_otg_pcd_ops = { ++ .get_frame = get_frame_number, ++ .wakeup = wakeup, ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ .lpm_support = test_lpm_enabled, ++#endif ++ // current versions must always be self-powered ++}; ++ ++static int _setup(dwc_otg_pcd_t * pcd, uint8_t * bytes) ++{ ++ int retval = -DWC_E_NOT_SUPPORTED; ++ if (gadget_wrapper->driver && gadget_wrapper->driver->setup) { ++ retval = gadget_wrapper->driver->setup(&gadget_wrapper->gadget, ++ (struct usb_ctrlrequest ++ *)bytes); ++ } ++ ++ if (retval == -ENOTSUPP) { ++ retval = -DWC_E_NOT_SUPPORTED; ++ } else if (retval < 0) { ++ retval = -DWC_E_INVALID; ++ } ++ ++ return retval; ++} ++ ++#ifdef DWC_EN_ISOC ++static int _isoc_complete(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle, int proc_buf_num) ++{ ++ int i, packet_count; ++ struct usb_gadget_iso_packet_descriptor *iso_packet = 0; ++ struct usb_iso_request *iso_req = req_handle; ++ ++ if (proc_buf_num) { ++ iso_packet = iso_req->iso_packet_desc1; ++ } else { ++ iso_packet = iso_req->iso_packet_desc0; ++ } ++ packet_count = ++ dwc_otg_pcd_get_iso_packet_count(pcd, ep_handle, req_handle); ++ for (i = 0; i < packet_count; ++i) { ++ int status; ++ int actual; ++ int offset; ++ dwc_otg_pcd_get_iso_packet_params(pcd, ep_handle, req_handle, ++ i, &status, &actual, &offset); ++ switch (status) { ++ case -DWC_E_NO_DATA: ++ status = -ENODATA; ++ break; ++ default: ++ if (status) { ++ DWC_PRINTF("unknown status in isoc packet\n"); ++ } ++ ++ } ++ iso_packet[i].status = status; ++ iso_packet[i].offset = offset; ++ iso_packet[i].actual_length = actual; ++ } ++ ++ iso_req->status = 0; ++ iso_req->process_buffer(ep_handle, iso_req); ++ ++ return 0; ++} ++#endif /* DWC_EN_ISOC */ ++ ++#ifdef DWC_UTE_PER_IO ++/** ++ * Copy the contents of the extended request to the Linux usb_request's ++ * extended part and call the gadget's completion. ++ * ++ * @param pcd Pointer to the pcd structure ++ * @param ep_handle Void pointer to the usb_ep structure ++ * @param req_handle Void pointer to the usb_request structure ++ * @param status Request status returned from the portable logic ++ * @param ereq_port Void pointer to the extended request structure ++ * created in the the portable part that contains the ++ * results of the processed iso packets. ++ */ ++static int _xisoc_complete(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle, int32_t status, void *ereq_port) ++{ ++ struct dwc_ute_iso_req_ext *ereqorg = NULL; ++ struct dwc_iso_xreq_port *ereqport = NULL; ++ struct dwc_ute_iso_packet_descriptor *desc_org = NULL; ++ int i; ++ struct usb_request *req; ++ //struct dwc_ute_iso_packet_descriptor * ++ //int status = 0; ++ ++ req = (struct usb_request *)req_handle; ++ ereqorg = &req->ext_req; ++ ereqport = (struct dwc_iso_xreq_port *)ereq_port; ++ desc_org = ereqorg->per_io_frame_descs; ++ ++ if (req && req->complete) { ++ /* Copy the request data from the portable logic to our request */ ++ for (i = 0; i < ereqport->pio_pkt_count; i++) { ++ desc_org[i].actual_length = ++ ereqport->per_io_frame_descs[i].actual_length; ++ desc_org[i].status = ++ ereqport->per_io_frame_descs[i].status; ++ } ++ ++ switch (status) { ++ case -DWC_E_SHUTDOWN: ++ req->status = -ESHUTDOWN; ++ break; ++ case -DWC_E_RESTART: ++ req->status = -ECONNRESET; ++ break; ++ case -DWC_E_INVALID: ++ req->status = -EINVAL; ++ break; ++ case -DWC_E_TIMEOUT: ++ req->status = -ETIMEDOUT; ++ break; ++ default: ++ req->status = status; ++ } ++ ++ /* And call the gadget's completion */ ++ req->complete(ep_handle, req); ++ } ++ ++ return 0; ++} ++#endif /* DWC_UTE_PER_IO */ ++ ++static int _complete(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle, int32_t status, uint32_t actual) ++{ ++ struct usb_request *req = (struct usb_request *)req_handle; ++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,27) ++ struct dwc_otg_pcd_ep *ep = NULL; ++#endif ++ ++ if (req && req->complete) { ++ switch (status) { ++ case -DWC_E_SHUTDOWN: ++ req->status = -ESHUTDOWN; ++ break; ++ case -DWC_E_RESTART: ++ req->status = -ECONNRESET; ++ break; ++ case -DWC_E_INVALID: ++ req->status = -EINVAL; ++ break; ++ case -DWC_E_TIMEOUT: ++ req->status = -ETIMEDOUT; ++ break; ++ default: ++ req->status = status; ++ ++ } ++ ++ req->actual = actual; ++ DWC_SPINUNLOCK(pcd->lock); ++ req->complete(ep_handle, req); ++ DWC_SPINLOCK(pcd->lock); ++ } ++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,27) ++ ep = ep_from_handle(pcd, ep_handle); ++ if (GET_CORE_IF(pcd)->dma_enable) { ++ if (req->length != 0) { ++ dwc_otg_device_t *otg_dev = gadget_wrapper->pcd->otg_dev; ++ struct device *dev = NULL; ++ ++ if (otg_dev != NULL) ++ dev = DWC_OTG_OS_GETDEV(otg_dev->os_dep); ++ ++ dma_unmap_single(dev, req->dma, req->length, ++ ep->dwc_ep.is_in ? ++ DMA_TO_DEVICE: DMA_FROM_DEVICE); ++ } ++ } ++#endif ++ ++ return 0; ++} ++ ++static int _connect(dwc_otg_pcd_t * pcd, int speed) ++{ ++ gadget_wrapper->gadget.speed = speed; ++ return 0; ++} ++ ++static int _disconnect(dwc_otg_pcd_t * pcd) ++{ ++ if (gadget_wrapper->driver && gadget_wrapper->driver->disconnect) { ++ gadget_wrapper->driver->disconnect(&gadget_wrapper->gadget); ++ } ++ return 0; ++} ++ ++static int _resume(dwc_otg_pcd_t * pcd) ++{ ++ if (gadget_wrapper->driver && gadget_wrapper->driver->resume) { ++ gadget_wrapper->driver->resume(&gadget_wrapper->gadget); ++ } ++ ++ return 0; ++} ++ ++static int _suspend(dwc_otg_pcd_t * pcd) ++{ ++ if (gadget_wrapper->driver && gadget_wrapper->driver->suspend) { ++ gadget_wrapper->driver->suspend(&gadget_wrapper->gadget); ++ } ++ return 0; ++} ++ ++/** ++ * This function updates the otg values in the gadget structure. ++ */ ++static int _hnp_changed(dwc_otg_pcd_t * pcd) ++{ ++ ++ if (!gadget_wrapper->gadget.is_otg) ++ return 0; ++ ++ gadget_wrapper->gadget.b_hnp_enable = get_b_hnp_enable(pcd); ++ gadget_wrapper->gadget.a_hnp_support = get_a_hnp_support(pcd); ++ gadget_wrapper->gadget.a_alt_hnp_support = get_a_alt_hnp_support(pcd); ++ return 0; ++} ++ ++static int _reset(dwc_otg_pcd_t * pcd) ++{ ++ return 0; ++} ++ ++#ifdef DWC_UTE_CFI ++static int _cfi_setup(dwc_otg_pcd_t * pcd, void *cfi_req) ++{ ++ int retval = -DWC_E_INVALID; ++ if (gadget_wrapper->driver->cfi_feature_setup) { ++ retval = ++ gadget_wrapper->driver-> ++ cfi_feature_setup(&gadget_wrapper->gadget, ++ (struct cfi_usb_ctrlrequest *)cfi_req); ++ } ++ ++ return retval; ++} ++#endif ++ ++static const struct dwc_otg_pcd_function_ops fops = { ++ .complete = _complete, ++#ifdef DWC_EN_ISOC ++ .isoc_complete = _isoc_complete, ++#endif ++ .setup = _setup, ++ .disconnect = _disconnect, ++ .connect = _connect, ++ .resume = _resume, ++ .suspend = _suspend, ++ .hnp_changed = _hnp_changed, ++ .reset = _reset, ++#ifdef DWC_UTE_CFI ++ .cfi_setup = _cfi_setup, ++#endif ++#ifdef DWC_UTE_PER_IO ++ .xisoc_complete = _xisoc_complete, ++#endif ++}; ++ ++/** ++ * This function is the top level PCD interrupt handler. ++ */ ++static irqreturn_t dwc_otg_pcd_irq(int irq, void *dev) ++{ ++ dwc_otg_pcd_t *pcd = dev; ++ int32_t retval = IRQ_NONE; ++ ++ retval = dwc_otg_pcd_handle_intr(pcd); ++ if (retval != 0) { ++ S3C2410X_CLEAR_EINTPEND(); ++ } ++ return IRQ_RETVAL(retval); ++} ++ ++/** ++ * This function initialized the usb_ep structures to there default ++ * state. ++ * ++ * @param d Pointer on gadget_wrapper. ++ */ ++void gadget_add_eps(struct gadget_wrapper *d) ++{ ++ static const char *names[] = { ++ ++ "ep0", ++ "ep1in", ++ "ep2in", ++ "ep3in", ++ "ep4in", ++ "ep5in", ++ "ep6in", ++ "ep7in", ++ "ep8in", ++ "ep9in", ++ "ep10in", ++ "ep11in", ++ "ep12in", ++ "ep13in", ++ "ep14in", ++ "ep15in", ++ "ep1out", ++ "ep2out", ++ "ep3out", ++ "ep4out", ++ "ep5out", ++ "ep6out", ++ "ep7out", ++ "ep8out", ++ "ep9out", ++ "ep10out", ++ "ep11out", ++ "ep12out", ++ "ep13out", ++ "ep14out", ++ "ep15out" ++ }; ++ ++ int i; ++ struct usb_ep *ep; ++ int8_t dev_endpoints; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s\n", __func__); ++ ++ INIT_LIST_HEAD(&d->gadget.ep_list); ++ d->gadget.ep0 = &d->ep0; ++ d->gadget.speed = USB_SPEED_UNKNOWN; ++ ++ INIT_LIST_HEAD(&d->gadget.ep0->ep_list); ++ ++ /** ++ * Initialize the EP0 structure. ++ */ ++ ep = &d->ep0; ++ ++ /* Init the usb_ep structure. */ ++ ep->name = names[0]; ++ ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops; ++ ++ /** ++ * @todo NGS: What should the max packet size be set to ++ * here? Before EP type is set? ++ */ ++ ep->maxpacket = MAX_PACKET_SIZE; ++ dwc_otg_pcd_ep_enable(d->pcd, NULL, ep); ++ ++ list_add_tail(&ep->ep_list, &d->gadget.ep_list); ++ ++ /** ++ * Initialize the EP structures. ++ */ ++ dev_endpoints = d->pcd->core_if->dev_if->num_in_eps; ++ ++ for (i = 0; i < dev_endpoints; i++) { ++ ep = &d->in_ep[i]; ++ ++ /* Init the usb_ep structure. */ ++ ep->name = names[d->pcd->in_ep[i].dwc_ep.num]; ++ ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops; ++ ++ /** ++ * @todo NGS: What should the max packet size be set to ++ * here? Before EP type is set? ++ */ ++ ep->maxpacket = MAX_PACKET_SIZE; ++ list_add_tail(&ep->ep_list, &d->gadget.ep_list); ++ } ++ ++ dev_endpoints = d->pcd->core_if->dev_if->num_out_eps; ++ ++ for (i = 0; i < dev_endpoints; i++) { ++ ep = &d->out_ep[i]; ++ ++ /* Init the usb_ep structure. */ ++ ep->name = names[15 + d->pcd->out_ep[i].dwc_ep.num]; ++ ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops; ++ ++ /** ++ * @todo NGS: What should the max packet size be set to ++ * here? Before EP type is set? ++ */ ++ ep->maxpacket = MAX_PACKET_SIZE; ++ ++ list_add_tail(&ep->ep_list, &d->gadget.ep_list); ++ } ++ ++ /* remove ep0 from the list. There is a ep0 pointer. */ ++ list_del_init(&d->ep0.ep_list); ++ ++ d->ep0.maxpacket = MAX_EP0_SIZE; ++} ++ ++/** ++ * This function releases the Gadget device. ++ * required by device_unregister(). ++ * ++ * @todo Should this do something? Should it free the PCD? ++ */ ++static void dwc_otg_pcd_gadget_release(struct device *dev) ++{ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, dev); ++} ++ ++static struct gadget_wrapper *alloc_wrapper(dwc_bus_dev_t *_dev) ++{ ++ static char pcd_name[] = "dwc_otg_pcd"; ++ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); ++ struct gadget_wrapper *d; ++ int retval; ++ ++ d = DWC_ALLOC(sizeof(*d)); ++ if (d == NULL) { ++ return NULL; ++ } ++ ++ memset(d, 0, sizeof(*d)); ++ ++ d->gadget.name = pcd_name; ++ d->pcd = otg_dev->pcd; ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) ++ strcpy(d->gadget.dev.bus_id, "gadget"); ++#else ++ dev_set_name(&d->gadget.dev, "%s", "gadget"); ++#endif ++ ++ d->gadget.dev.parent = &_dev->dev; ++ d->gadget.dev.release = dwc_otg_pcd_gadget_release; ++ d->gadget.ops = &dwc_otg_pcd_ops; ++ d->gadget.max_speed = dwc_otg_pcd_is_dualspeed(otg_dev->pcd) ? USB_SPEED_HIGH:USB_SPEED_FULL; ++ d->gadget.is_otg = dwc_otg_pcd_is_otg(otg_dev->pcd); ++ ++ d->driver = 0; ++ /* Register the gadget device */ ++ retval = device_register(&d->gadget.dev); ++ if (retval != 0) { ++ DWC_ERROR("device_register failed\n"); ++ DWC_FREE(d); ++ return NULL; ++ } ++ ++ return d; ++} ++ ++static void free_wrapper(struct gadget_wrapper *d) ++{ ++ if (d->driver) { ++ /* should have been done already by driver model core */ ++ DWC_WARN("driver '%s' is still registered\n", ++ d->driver->driver.name); ++ usb_gadget_unregister_driver(d->driver); ++ } ++ ++ device_unregister(&d->gadget.dev); ++ DWC_FREE(d); ++} ++ ++/** ++ * This function initialized the PCD portion of the driver. ++ * ++ */ ++int pcd_init(dwc_bus_dev_t *_dev) ++{ ++ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); ++ int retval = 0; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p) otg_dev=%p\n", __func__, _dev, otg_dev); ++ ++ otg_dev->pcd = dwc_otg_pcd_init(otg_dev->core_if); ++ ++ if (!otg_dev->pcd) { ++ DWC_ERROR("dwc_otg_pcd_init failed\n"); ++ return -ENOMEM; ++ } ++ ++ otg_dev->pcd->otg_dev = otg_dev; ++ gadget_wrapper = alloc_wrapper(_dev); ++ ++ /* ++ * Initialize EP structures ++ */ ++ gadget_add_eps(gadget_wrapper); ++ /* ++ * Setup interupt handler ++ */ ++#ifdef PLATFORM_INTERFACE ++ DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", ++ platform_get_irq(_dev, 0)); ++ retval = request_irq(platform_get_irq(_dev, 0), dwc_otg_pcd_irq, ++ IRQF_SHARED, gadget_wrapper->gadget.name, ++ otg_dev->pcd); ++ if (retval != 0) { ++ DWC_ERROR("request of irq%d failed\n", ++ platform_get_irq(_dev, 0)); ++ free_wrapper(gadget_wrapper); ++ return -EBUSY; ++ } ++#else ++ DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", ++ _dev->irq); ++ retval = request_irq(_dev->irq, dwc_otg_pcd_irq, ++ IRQF_SHARED | IRQF_DISABLED, ++ gadget_wrapper->gadget.name, otg_dev->pcd); ++ if (retval != 0) { ++ DWC_ERROR("request of irq%d failed\n", _dev->irq); ++ free_wrapper(gadget_wrapper); ++ return -EBUSY; ++ } ++#endif ++ ++ dwc_otg_pcd_start(gadget_wrapper->pcd, &fops); ++ ++ return retval; ++} ++ ++/** ++ * Cleanup the PCD. ++ */ ++void pcd_remove(dwc_bus_dev_t *_dev) ++{ ++ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); ++ dwc_otg_pcd_t *pcd = otg_dev->pcd; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p) otg_dev %p\n", __func__, _dev, otg_dev); ++ ++ /* ++ * Free the IRQ ++ */ ++#ifdef PLATFORM_INTERFACE ++ free_irq(platform_get_irq(_dev, 0), pcd); ++#else ++ free_irq(_dev->irq, pcd); ++#endif ++ dwc_otg_pcd_remove(otg_dev->pcd); ++ free_wrapper(gadget_wrapper); ++ otg_dev->pcd = 0; ++} ++ ++/** ++ * This function registers a gadget driver with the PCD. ++ * ++ * When a driver is successfully registered, it will receive control ++ * requests including set_configuration(), which enables non-control ++ * requests. then usb traffic follows until a disconnect is reported. ++ * then a host may connect again, or the driver might get unbound. ++ * ++ * @param driver The driver being registered ++ * @param bind The bind function of gadget driver ++ */ ++ ++int usb_gadget_probe_driver(struct usb_gadget_driver *driver) ++{ ++ int retval; ++ ++ DWC_DEBUGPL(DBG_PCD, "registering gadget driver '%s'\n", ++ driver->driver.name); ++ ++ if (!driver || driver->max_speed == USB_SPEED_UNKNOWN || ++ !driver->bind || ++ !driver->unbind || !driver->disconnect || !driver->setup) { ++ DWC_DEBUGPL(DBG_PCDV, "EINVAL\n"); ++ return -EINVAL; ++ } ++ if (gadget_wrapper == 0) { ++ DWC_DEBUGPL(DBG_PCDV, "ENODEV\n"); ++ return -ENODEV; ++ } ++ if (gadget_wrapper->driver != 0) { ++ DWC_DEBUGPL(DBG_PCDV, "EBUSY (%p)\n", gadget_wrapper->driver); ++ return -EBUSY; ++ } ++ ++ /* hook up the driver */ ++ gadget_wrapper->driver = driver; ++ gadget_wrapper->gadget.dev.driver = &driver->driver; ++ ++ DWC_DEBUGPL(DBG_PCD, "bind to driver %s\n", driver->driver.name); ++ retval = driver->bind(&gadget_wrapper->gadget, gadget_wrapper->driver); ++ if (retval) { ++ DWC_ERROR("bind to driver %s --> error %d\n", ++ driver->driver.name, retval); ++ gadget_wrapper->driver = 0; ++ gadget_wrapper->gadget.dev.driver = 0; ++ return retval; ++ } ++ DWC_DEBUGPL(DBG_ANY, "registered gadget driver '%s'\n", ++ driver->driver.name); ++ return 0; ++} ++EXPORT_SYMBOL(usb_gadget_probe_driver); ++ ++/** ++ * This function unregisters a gadget driver ++ * ++ * @param driver The driver being unregistered ++ */ ++int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) ++{ ++ //DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, _driver); ++ ++ if (gadget_wrapper == 0) { ++ DWC_DEBUGPL(DBG_ANY, "%s Return(%d): s_pcd==0\n", __func__, ++ -ENODEV); ++ return -ENODEV; ++ } ++ if (driver == 0 || driver != gadget_wrapper->driver) { ++ DWC_DEBUGPL(DBG_ANY, "%s Return(%d): driver?\n", __func__, ++ -EINVAL); ++ return -EINVAL; ++ } ++ ++ driver->unbind(&gadget_wrapper->gadget); ++ gadget_wrapper->driver = 0; ++ ++ DWC_DEBUGPL(DBG_ANY, "unregistered driver '%s'\n", driver->driver.name); ++ return 0; ++} ++ ++EXPORT_SYMBOL(usb_gadget_unregister_driver); ++ ++#endif /* DWC_HOST_ONLY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_regs.h +@@ -0,0 +1,2550 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_regs.h $ ++ * $Revision: #98 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#ifndef __DWC_OTG_REGS_H__ ++#define __DWC_OTG_REGS_H__ ++ ++#include "dwc_otg_core_if.h" ++ ++/** ++ * @file ++ * ++ * This file contains the data structures for accessing the DWC_otg core registers. ++ * ++ * The application interfaces with the HS OTG core by reading from and ++ * writing to the Control and Status Register (CSR) space through the ++ * AHB Slave interface. These registers are 32 bits wide, and the ++ * addresses are 32-bit-block aligned. ++ * CSRs are classified as follows: ++ * - Core Global Registers ++ * - Device Mode Registers ++ * - Device Global Registers ++ * - Device Endpoint Specific Registers ++ * - Host Mode Registers ++ * - Host Global Registers ++ * - Host Port CSRs ++ * - Host Channel Specific Registers ++ * ++ * Only the Core Global registers can be accessed in both Device and ++ * Host modes. When the HS OTG core is operating in one mode, either ++ * Device or Host, the application must not access registers from the ++ * other mode. When the core switches from one mode to another, the ++ * registers in the new mode of operation must be reprogrammed as they ++ * would be after a power-on reset. ++ */ ++ ++/****************************************************************************/ ++/** DWC_otg Core registers . ++ * The dwc_otg_core_global_regs structure defines the size ++ * and relative field offsets for the Core Global registers. ++ */ ++typedef struct dwc_otg_core_global_regs { ++ /** OTG Control and Status Register. <i>Offset: 000h</i> */ ++ volatile uint32_t gotgctl; ++ /** OTG Interrupt Register. <i>Offset: 004h</i> */ ++ volatile uint32_t gotgint; ++ /**Core AHB Configuration Register. <i>Offset: 008h</i> */ ++ volatile uint32_t gahbcfg; ++ ++#define DWC_GLBINTRMASK 0x0001 ++#define DWC_DMAENABLE 0x0020 ++#define DWC_NPTXEMPTYLVL_EMPTY 0x0080 ++#define DWC_NPTXEMPTYLVL_HALFEMPTY 0x0000 ++#define DWC_PTXEMPTYLVL_EMPTY 0x0100 ++#define DWC_PTXEMPTYLVL_HALFEMPTY 0x0000 ++ ++ /**Core USB Configuration Register. <i>Offset: 00Ch</i> */ ++ volatile uint32_t gusbcfg; ++ /**Core Reset Register. <i>Offset: 010h</i> */ ++ volatile uint32_t grstctl; ++ /**Core Interrupt Register. <i>Offset: 014h</i> */ ++ volatile uint32_t gintsts; ++ /**Core Interrupt Mask Register. <i>Offset: 018h</i> */ ++ volatile uint32_t gintmsk; ++ /**Receive Status Queue Read Register (Read Only). <i>Offset: 01Ch</i> */ ++ volatile uint32_t grxstsr; ++ /**Receive Status Queue Read & POP Register (Read Only). <i>Offset: 020h</i>*/ ++ volatile uint32_t grxstsp; ++ /**Receive FIFO Size Register. <i>Offset: 024h</i> */ ++ volatile uint32_t grxfsiz; ++ /**Non Periodic Transmit FIFO Size Register. <i>Offset: 028h</i> */ ++ volatile uint32_t gnptxfsiz; ++ /**Non Periodic Transmit FIFO/Queue Status Register (Read ++ * Only). <i>Offset: 02Ch</i> */ ++ volatile uint32_t gnptxsts; ++ /**I2C Access Register. <i>Offset: 030h</i> */ ++ volatile uint32_t gi2cctl; ++ /**PHY Vendor Control Register. <i>Offset: 034h</i> */ ++ volatile uint32_t gpvndctl; ++ /**General Purpose Input/Output Register. <i>Offset: 038h</i> */ ++ volatile uint32_t ggpio; ++ /**User ID Register. <i>Offset: 03Ch</i> */ ++ volatile uint32_t guid; ++ /**Synopsys ID Register (Read Only). <i>Offset: 040h</i> */ ++ volatile uint32_t gsnpsid; ++ /**User HW Config1 Register (Read Only). <i>Offset: 044h</i> */ ++ volatile uint32_t ghwcfg1; ++ /**User HW Config2 Register (Read Only). <i>Offset: 048h</i> */ ++ volatile uint32_t ghwcfg2; ++#define DWC_SLAVE_ONLY_ARCH 0 ++#define DWC_EXT_DMA_ARCH 1 ++#define DWC_INT_DMA_ARCH 2 ++ ++#define DWC_MODE_HNP_SRP_CAPABLE 0 ++#define DWC_MODE_SRP_ONLY_CAPABLE 1 ++#define DWC_MODE_NO_HNP_SRP_CAPABLE 2 ++#define DWC_MODE_SRP_CAPABLE_DEVICE 3 ++#define DWC_MODE_NO_SRP_CAPABLE_DEVICE 4 ++#define DWC_MODE_SRP_CAPABLE_HOST 5 ++#define DWC_MODE_NO_SRP_CAPABLE_HOST 6 ++ ++ /**User HW Config3 Register (Read Only). <i>Offset: 04Ch</i> */ ++ volatile uint32_t ghwcfg3; ++ /**User HW Config4 Register (Read Only). <i>Offset: 050h</i>*/ ++ volatile uint32_t ghwcfg4; ++ /** Core LPM Configuration register <i>Offset: 054h</i>*/ ++ volatile uint32_t glpmcfg; ++ /** Global PowerDn Register <i>Offset: 058h</i> */ ++ volatile uint32_t gpwrdn; ++ /** Global DFIFO SW Config Register <i>Offset: 05Ch</i> */ ++ volatile uint32_t gdfifocfg; ++ /** ADP Control Register <i>Offset: 060h</i> */ ++ volatile uint32_t adpctl; ++ /** Reserved <i>Offset: 064h-0FFh</i> */ ++ volatile uint32_t reserved39[39]; ++ /** Host Periodic Transmit FIFO Size Register. <i>Offset: 100h</i> */ ++ volatile uint32_t hptxfsiz; ++ /** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled, ++ otherwise Device Transmit FIFO#n Register. ++ * <i>Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15).</i> */ ++ volatile uint32_t dtxfsiz[15]; ++} dwc_otg_core_global_regs_t; ++ ++/** ++ * This union represents the bit fields of the Core OTG Control ++ * and Status Register (GOTGCTL). Set the bits using the bit ++ * fields then write the <i>d32</i> value to the register. ++ */ ++typedef union gotgctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned sesreqscs:1; ++ unsigned sesreq:1; ++ unsigned vbvalidoven:1; ++ unsigned vbvalidovval:1; ++ unsigned avalidoven:1; ++ unsigned avalidovval:1; ++ unsigned bvalidoven:1; ++ unsigned bvalidovval:1; ++ unsigned hstnegscs:1; ++ unsigned hnpreq:1; ++ unsigned hstsethnpen:1; ++ unsigned devhnpen:1; ++ unsigned reserved12_15:4; ++ unsigned conidsts:1; ++ unsigned dbnctime:1; ++ unsigned asesvld:1; ++ unsigned bsesvld:1; ++ unsigned otgver:1; ++ unsigned reserved1:1; ++ unsigned multvalidbc:5; ++ unsigned chirpen:1; ++ unsigned reserved28_31:4; ++ } b; ++} gotgctl_data_t; ++ ++/** ++ * This union represents the bit fields of the Core OTG Interrupt Register ++ * (GOTGINT). Set/clear the bits using the bit fields then write the <i>d32</i> ++ * value to the register. ++ */ ++typedef union gotgint_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Current Mode */ ++ unsigned reserved0_1:2; ++ ++ /** Session End Detected */ ++ unsigned sesenddet:1; ++ ++ unsigned reserved3_7:5; ++ ++ /** Session Request Success Status Change */ ++ unsigned sesreqsucstschng:1; ++ /** Host Negotiation Success Status Change */ ++ unsigned hstnegsucstschng:1; ++ ++ unsigned reserved10_16:7; ++ ++ /** Host Negotiation Detected */ ++ unsigned hstnegdet:1; ++ /** A-Device Timeout Change */ ++ unsigned adevtoutchng:1; ++ /** Debounce Done */ ++ unsigned debdone:1; ++ /** Multi-Valued input changed */ ++ unsigned mvic:1; ++ ++ unsigned reserved31_21:11; ++ ++ } b; ++} gotgint_data_t; ++ ++/** ++ * This union represents the bit fields of the Core AHB Configuration ++ * Register (GAHBCFG). Set/clear the bits using the bit fields then ++ * write the <i>d32</i> value to the register. ++ */ ++typedef union gahbcfg_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned glblintrmsk:1; ++#define DWC_GAHBCFG_GLBINT_ENABLE 1 ++ ++ unsigned hburstlen:4; ++#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE 0 ++#define DWC_GAHBCFG_INT_DMA_BURST_INCR 1 ++#define DWC_GAHBCFG_INT_DMA_BURST_INCR4 3 ++#define DWC_GAHBCFG_INT_DMA_BURST_INCR8 5 ++#define DWC_GAHBCFG_INT_DMA_BURST_INCR16 7 ++ ++ unsigned dmaenable:1; ++#define DWC_GAHBCFG_DMAENABLE 1 ++ unsigned reserved:1; ++ unsigned nptxfemplvl_txfemplvl:1; ++ unsigned ptxfemplvl:1; ++#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY 1 ++#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0 ++ unsigned reserved9_20:12; ++ unsigned remmemsupp:1; ++ unsigned notialldmawrit:1; ++ unsigned ahbsingle:1; ++ unsigned reserved24_31:8; ++ } b; ++} gahbcfg_data_t; ++ ++/** ++ * This union represents the bit fields of the Core USB Configuration ++ * Register (GUSBCFG). Set the bits using the bit fields then write ++ * the <i>d32</i> value to the register. ++ */ ++typedef union gusbcfg_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned toutcal:3; ++ unsigned phyif:1; ++ unsigned ulpi_utmi_sel:1; ++ unsigned fsintf:1; ++ unsigned physel:1; ++ unsigned ddrsel:1; ++ unsigned srpcap:1; ++ unsigned hnpcap:1; ++ unsigned usbtrdtim:4; ++ unsigned reserved1:1; ++ unsigned phylpwrclksel:1; ++ unsigned otgutmifssel:1; ++ unsigned ulpi_fsls:1; ++ unsigned ulpi_auto_res:1; ++ unsigned ulpi_clk_sus_m:1; ++ unsigned ulpi_ext_vbus_drv:1; ++ unsigned ulpi_int_vbus_indicator:1; ++ unsigned term_sel_dl_pulse:1; ++ unsigned indicator_complement:1; ++ unsigned indicator_pass_through:1; ++ unsigned ulpi_int_prot_dis:1; ++ unsigned ic_usb_cap:1; ++ unsigned ic_traffic_pull_remove:1; ++ unsigned tx_end_delay:1; ++ unsigned force_host_mode:1; ++ unsigned force_dev_mode:1; ++ unsigned reserved31:1; ++ } b; ++} gusbcfg_data_t; ++ ++/** ++ * This union represents the bit fields of the Core Reset Register ++ * (GRSTCTL). Set/clear the bits using the bit fields then write the ++ * <i>d32</i> value to the register. ++ */ ++typedef union grstctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Core Soft Reset (CSftRst) (Device and Host) ++ * ++ * The application can flush the control logic in the ++ * entire core using this bit. This bit resets the ++ * pipelines in the AHB Clock domain as well as the ++ * PHY Clock domain. ++ * ++ * The state machines are reset to an IDLE state, the ++ * control bits in the CSRs are cleared, all the ++ * transmit FIFOs and the receive FIFO are flushed. ++ * ++ * The status mask bits that control the generation of ++ * the interrupt, are cleared, to clear the ++ * interrupt. The interrupt status bits are not ++ * cleared, so the application can get the status of ++ * any events that occurred in the core after it has ++ * set this bit. ++ * ++ * Any transactions on the AHB are terminated as soon ++ * as possible following the protocol. Any ++ * transactions on the USB are terminated immediately. ++ * ++ * The configuration settings in the CSRs are ++ * unchanged, so the software doesn't have to ++ * reprogram these registers (Device ++ * Configuration/Host Configuration/Core System ++ * Configuration/Core PHY Configuration). ++ * ++ * The application can write to this bit, any time it ++ * wants to reset the core. This is a self clearing ++ * bit and the core clears this bit after all the ++ * necessary logic is reset in the core, which may ++ * take several clocks, depending on the current state ++ * of the core. ++ */ ++ unsigned csftrst:1; ++ /** Hclk Soft Reset ++ * ++ * The application uses this bit to reset the control logic in ++ * the AHB clock domain. Only AHB clock domain pipelines are ++ * reset. ++ */ ++ unsigned hsftrst:1; ++ /** Host Frame Counter Reset (Host Only)<br> ++ * ++ * The application can reset the (micro)frame number ++ * counter inside the core, using this bit. When the ++ * (micro)frame counter is reset, the subsequent SOF ++ * sent out by the core, will have a (micro)frame ++ * number of 0. ++ */ ++ unsigned hstfrm:1; ++ /** In Token Sequence Learning Queue Flush ++ * (INTknQFlsh) (Device Only) ++ */ ++ unsigned intknqflsh:1; ++ /** RxFIFO Flush (RxFFlsh) (Device and Host) ++ * ++ * The application can flush the entire Receive FIFO ++ * using this bit. The application must first ++ * ensure that the core is not in the middle of a ++ * transaction. The application should write into ++ * this bit, only after making sure that neither the ++ * DMA engine is reading from the RxFIFO nor the MAC ++ * is writing the data in to the FIFO. The ++ * application should wait until the bit is cleared ++ * before performing any other operations. This bit ++ * will takes 8 clocks (slowest of PHY or AHB clock) ++ * to clear. ++ */ ++ unsigned rxfflsh:1; ++ /** TxFIFO Flush (TxFFlsh) (Device and Host). ++ * ++ * This bit is used to selectively flush a single or ++ * all transmit FIFOs. The application must first ++ * ensure that the core is not in the middle of a ++ * transaction. The application should write into ++ * this bit, only after making sure that neither the ++ * DMA engine is writing into the TxFIFO nor the MAC ++ * is reading the data out of the FIFO. The ++ * application should wait until the core clears this ++ * bit, before performing any operations. This bit ++ * will takes 8 clocks (slowest of PHY or AHB clock) ++ * to clear. ++ */ ++ unsigned txfflsh:1; ++ ++ /** TxFIFO Number (TxFNum) (Device and Host). ++ * ++ * This is the FIFO number which needs to be flushed, ++ * using the TxFIFO Flush bit. This field should not ++ * be changed until the TxFIFO Flush bit is cleared by ++ * the core. ++ * - 0x0 : Non Periodic TxFIFO Flush ++ * - 0x1 : Periodic TxFIFO #1 Flush in device mode ++ * or Periodic TxFIFO in host mode ++ * - 0x2 : Periodic TxFIFO #2 Flush in device mode. ++ * - ... ++ * - 0xF : Periodic TxFIFO #15 Flush in device mode ++ * - 0x10: Flush all the Transmit NonPeriodic and ++ * Transmit Periodic FIFOs in the core ++ */ ++ unsigned txfnum:5; ++ /** Reserved */ ++ unsigned reserved11_29:19; ++ /** DMA Request Signal. Indicated DMA request is in ++ * probress. Used for debug purpose. */ ++ unsigned dmareq:1; ++ /** AHB Master Idle. Indicates the AHB Master State ++ * Machine is in IDLE condition. */ ++ unsigned ahbidle:1; ++ } b; ++} grstctl_t; ++ ++/** ++ * This union represents the bit fields of the Core Interrupt Mask ++ * Register (GINTMSK). Set/clear the bits using the bit fields then ++ * write the <i>d32</i> value to the register. ++ */ ++typedef union gintmsk_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned reserved0:1; ++ unsigned modemismatch:1; ++ unsigned otgintr:1; ++ unsigned sofintr:1; ++ unsigned rxstsqlvl:1; ++ unsigned nptxfempty:1; ++ unsigned ginnakeff:1; ++ unsigned goutnakeff:1; ++ unsigned ulpickint:1; ++ unsigned i2cintr:1; ++ unsigned erlysuspend:1; ++ unsigned usbsuspend:1; ++ unsigned usbreset:1; ++ unsigned enumdone:1; ++ unsigned isooutdrop:1; ++ unsigned eopframe:1; ++ unsigned restoredone:1; ++ unsigned epmismatch:1; ++ unsigned inepintr:1; ++ unsigned outepintr:1; ++ unsigned incomplisoin:1; ++ unsigned incomplisoout:1; ++ unsigned fetsusp:1; ++ unsigned resetdet:1; ++ unsigned portintr:1; ++ unsigned hcintr:1; ++ unsigned ptxfempty:1; ++ unsigned lpmtranrcvd:1; ++ unsigned conidstschng:1; ++ unsigned disconnect:1; ++ unsigned sessreqintr:1; ++ unsigned wkupintr:1; ++ } b; ++} gintmsk_data_t; ++/** ++ * This union represents the bit fields of the Core Interrupt Register ++ * (GINTSTS). Set/clear the bits using the bit fields then write the ++ * <i>d32</i> value to the register. ++ */ ++typedef union gintsts_data { ++ /** raw register data */ ++ uint32_t d32; ++#define DWC_SOF_INTR_MASK 0x0008 ++ /** register bits */ ++ struct { ++#define DWC_HOST_MODE 1 ++ unsigned curmode:1; ++ unsigned modemismatch:1; ++ unsigned otgintr:1; ++ unsigned sofintr:1; ++ unsigned rxstsqlvl:1; ++ unsigned nptxfempty:1; ++ unsigned ginnakeff:1; ++ unsigned goutnakeff:1; ++ unsigned ulpickint:1; ++ unsigned i2cintr:1; ++ unsigned erlysuspend:1; ++ unsigned usbsuspend:1; ++ unsigned usbreset:1; ++ unsigned enumdone:1; ++ unsigned isooutdrop:1; ++ unsigned eopframe:1; ++ unsigned restoredone:1; ++ unsigned epmismatch:1; ++ unsigned inepint:1; ++ unsigned outepintr:1; ++ unsigned incomplisoin:1; ++ unsigned incomplisoout:1; ++ unsigned fetsusp:1; ++ unsigned resetdet:1; ++ unsigned portintr:1; ++ unsigned hcintr:1; ++ unsigned ptxfempty:1; ++ unsigned lpmtranrcvd:1; ++ unsigned conidstschng:1; ++ unsigned disconnect:1; ++ unsigned sessreqintr:1; ++ unsigned wkupintr:1; ++ } b; ++} gintsts_data_t; ++ ++/** ++ * This union represents the bit fields in the Device Receive Status Read and ++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i> ++ * element then read out the bits using the <i>b</i>it elements. ++ */ ++typedef union device_grxsts_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned epnum:4; ++ unsigned bcnt:11; ++ unsigned dpid:2; ++ ++#define DWC_STS_DATA_UPDT 0x2 // OUT Data Packet ++#define DWC_STS_XFER_COMP 0x3 // OUT Data Transfer Complete ++ ++#define DWC_DSTS_GOUT_NAK 0x1 // Global OUT NAK ++#define DWC_DSTS_SETUP_COMP 0x4 // Setup Phase Complete ++#define DWC_DSTS_SETUP_UPDT 0x6 // SETUP Packet ++ unsigned pktsts:4; ++ unsigned fn:4; ++ unsigned reserved25_31:7; ++ } b; ++} device_grxsts_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Receive Status Read and ++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i> ++ * element then read out the bits using the <i>b</i>it elements. ++ */ ++typedef union host_grxsts_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned chnum:4; ++ unsigned bcnt:11; ++ unsigned dpid:2; ++ ++ unsigned pktsts:4; ++#define DWC_GRXSTS_PKTSTS_IN 0x2 ++#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP 0x3 ++#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5 ++#define DWC_GRXSTS_PKTSTS_CH_HALTED 0x7 ++ ++ unsigned reserved21_31:11; ++ } b; ++} host_grxsts_data_t; ++ ++/** ++ * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ, ++ * GNPTXFSIZ, DPTXFSIZn, DIEPTXFn). Read the register into the <i>d32</i> element ++ * then read out the bits using the <i>b</i>it elements. ++ */ ++typedef union fifosize_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned startaddr:16; ++ unsigned depth:16; ++ } b; ++} fifosize_data_t; ++ ++/** ++ * This union represents the bit fields in the Non-Periodic Transmit ++ * FIFO/Queue Status Register (GNPTXSTS). Read the register into the ++ * <i>d32</i> element then read out the bits using the <i>b</i>it ++ * elements. ++ */ ++typedef union gnptxsts_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned nptxfspcavail:16; ++ unsigned nptxqspcavail:8; ++ /** Top of the Non-Periodic Transmit Request Queue ++ * - bit 24 - Terminate (Last entry for the selected ++ * channel/EP) ++ * - bits 26:25 - Token Type ++ * - 2'b00 - IN/OUT ++ * - 2'b01 - Zero Length OUT ++ * - 2'b10 - PING/Complete Split ++ * - 2'b11 - Channel Halt ++ * - bits 30:27 - Channel/EP Number ++ */ ++ unsigned nptxqtop_terminate:1; ++ unsigned nptxqtop_token:2; ++ unsigned nptxqtop_chnep:4; ++ unsigned reserved:1; ++ } b; ++} gnptxsts_data_t; ++ ++/** ++ * This union represents the bit fields in the Transmit ++ * FIFO Status Register (DTXFSTS). Read the register into the ++ * <i>d32</i> element then read out the bits using the <i>b</i>it ++ * elements. ++ */ ++typedef union dtxfsts_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned txfspcavail:16; ++ unsigned reserved:16; ++ } b; ++} dtxfsts_data_t; ++ ++/** ++ * This union represents the bit fields in the I2C Control Register ++ * (I2CCTL). Read the register into the <i>d32</i> element then read out the ++ * bits using the <i>b</i>it elements. ++ */ ++typedef union gi2cctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned rwdata:8; ++ unsigned regaddr:8; ++ unsigned addr:7; ++ unsigned i2cen:1; ++ unsigned ack:1; ++ unsigned i2csuspctl:1; ++ unsigned i2cdevaddr:2; ++ unsigned i2cdatse0:1; ++ unsigned reserved:1; ++ unsigned rw:1; ++ unsigned bsydne:1; ++ } b; ++} gi2cctl_data_t; ++ ++/** ++ * This union represents the bit fields in the PHY Vendor Control Register ++ * (GPVNDCTL). Read the register into the <i>d32</i> element then read out the ++ * bits using the <i>b</i>it elements. ++ */ ++typedef union gpvndctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned regdata:8; ++ unsigned vctrl:8; ++ unsigned regaddr16_21:6; ++ unsigned regwr:1; ++ unsigned reserved23_24:2; ++ unsigned newregreq:1; ++ unsigned vstsbsy:1; ++ unsigned vstsdone:1; ++ unsigned reserved28_30:3; ++ unsigned disulpidrvr:1; ++ } b; ++} gpvndctl_data_t; ++ ++/** ++ * This union represents the bit fields in the General Purpose ++ * Input/Output Register (GGPIO). ++ * Read the register into the <i>d32</i> element then read out the ++ * bits using the <i>b</i>it elements. ++ */ ++typedef union ggpio_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned gpi:16; ++ unsigned gpo:16; ++ } b; ++} ggpio_data_t; ++ ++/** ++ * This union represents the bit fields in the User ID Register ++ * (GUID). Read the register into the <i>d32</i> element then read out the ++ * bits using the <i>b</i>it elements. ++ */ ++typedef union guid_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned rwdata:32; ++ } b; ++} guid_data_t; ++ ++/** ++ * This union represents the bit fields in the Synopsys ID Register ++ * (GSNPSID). Read the register into the <i>d32</i> element then read out the ++ * bits using the <i>b</i>it elements. ++ */ ++typedef union gsnpsid_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned rwdata:32; ++ } b; ++} gsnpsid_data_t; ++ ++/** ++ * This union represents the bit fields in the User HW Config1 ++ * Register. Read the register into the <i>d32</i> element then read ++ * out the bits using the <i>b</i>it elements. ++ */ ++typedef union hwcfg1_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned ep_dir0:2; ++ unsigned ep_dir1:2; ++ unsigned ep_dir2:2; ++ unsigned ep_dir3:2; ++ unsigned ep_dir4:2; ++ unsigned ep_dir5:2; ++ unsigned ep_dir6:2; ++ unsigned ep_dir7:2; ++ unsigned ep_dir8:2; ++ unsigned ep_dir9:2; ++ unsigned ep_dir10:2; ++ unsigned ep_dir11:2; ++ unsigned ep_dir12:2; ++ unsigned ep_dir13:2; ++ unsigned ep_dir14:2; ++ unsigned ep_dir15:2; ++ } b; ++} hwcfg1_data_t; ++ ++/** ++ * This union represents the bit fields in the User HW Config2 ++ * Register. Read the register into the <i>d32</i> element then read ++ * out the bits using the <i>b</i>it elements. ++ */ ++typedef union hwcfg2_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /* GHWCFG2 */ ++ unsigned op_mode:3; ++#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0 ++#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1 ++#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2 ++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3 ++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4 ++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5 ++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6 ++ ++ unsigned architecture:2; ++ unsigned point2point:1; ++ unsigned hs_phy_type:2; ++#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0 ++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1 ++#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2 ++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3 ++ ++ unsigned fs_phy_type:2; ++ unsigned num_dev_ep:4; ++ unsigned num_host_chan:4; ++ unsigned perio_ep_supported:1; ++ unsigned dynamic_fifo:1; ++ unsigned multi_proc_int:1; ++ unsigned reserved21:1; ++ unsigned nonperio_tx_q_depth:2; ++ unsigned host_perio_tx_q_depth:2; ++ unsigned dev_token_q_depth:5; ++ unsigned otg_enable_ic_usb:1; ++ } b; ++} hwcfg2_data_t; ++ ++/** ++ * This union represents the bit fields in the User HW Config3 ++ * Register. Read the register into the <i>d32</i> element then read ++ * out the bits using the <i>b</i>it elements. ++ */ ++typedef union hwcfg3_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /* GHWCFG3 */ ++ unsigned xfer_size_cntr_width:4; ++ unsigned packet_size_cntr_width:3; ++ unsigned otg_func:1; ++ unsigned i2c:1; ++ unsigned vendor_ctrl_if:1; ++ unsigned optional_features:1; ++ unsigned synch_reset_type:1; ++ unsigned adp_supp:1; ++ unsigned otg_enable_hsic:1; ++ unsigned bc_support:1; ++ unsigned otg_lpm_en:1; ++ unsigned dfifo_depth:16; ++ } b; ++} hwcfg3_data_t; ++ ++/** ++ * This union represents the bit fields in the User HW Config4 ++ * Register. Read the register into the <i>d32</i> element then read ++ * out the bits using the <i>b</i>it elements. ++ */ ++typedef union hwcfg4_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned num_dev_perio_in_ep:4; ++ unsigned power_optimiz:1; ++ unsigned min_ahb_freq:1; ++ unsigned hiber:1; ++ unsigned xhiber:1; ++ unsigned reserved:6; ++ unsigned utmi_phy_data_width:2; ++ unsigned num_dev_mode_ctrl_ep:4; ++ unsigned iddig_filt_en:1; ++ unsigned vbus_valid_filt_en:1; ++ unsigned a_valid_filt_en:1; ++ unsigned b_valid_filt_en:1; ++ unsigned session_end_filt_en:1; ++ unsigned ded_fifo_en:1; ++ unsigned num_in_eps:4; ++ unsigned desc_dma:1; ++ unsigned desc_dma_dyn:1; ++ } b; ++} hwcfg4_data_t; ++ ++/** ++ * This union represents the bit fields of the Core LPM Configuration ++ * Register (GLPMCFG). Set the bits using bit fields then write ++ * the <i>d32</i> value to the register. ++ */ ++typedef union glpmctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** LPM-Capable (LPMCap) (Device and Host) ++ * The application uses this bit to control ++ * the DWC_otg core LPM capabilities. ++ */ ++ unsigned lpm_cap_en:1; ++ /** LPM response programmed by application (AppL1Res) (Device) ++ * Handshake response to LPM token pre-programmed ++ * by device application software. ++ */ ++ unsigned appl_resp:1; ++ /** Host Initiated Resume Duration (HIRD) (Device and Host) ++ * In Host mode this field indicates the value of HIRD ++ * to be sent in an LPM transaction. ++ * In Device mode this field is updated with the ++ * Received LPM Token HIRD bmAttribute ++ * when an ACK/NYET/STALL response is sent ++ * to an LPM transaction. ++ */ ++ unsigned hird:4; ++ /** RemoteWakeEnable (bRemoteWake) (Device and Host) ++ * In Host mode this bit indicates the value of remote ++ * wake up to be sent in wIndex field of LPM transaction. ++ * In Device mode this field is updated with the ++ * Received LPM Token bRemoteWake bmAttribute ++ * when an ACK/NYET/STALL response is sent ++ * to an LPM transaction. ++ */ ++ unsigned rem_wkup_en:1; ++ /** Enable utmi_sleep_n (EnblSlpM) (Device and Host) ++ * The application uses this bit to control ++ * the utmi_sleep_n assertion to the PHY when in L1 state. ++ */ ++ unsigned en_utmi_sleep:1; ++ /** HIRD Threshold (HIRD_Thres) (Device and Host) ++ */ ++ unsigned hird_thres:5; ++ /** LPM Response (CoreL1Res) (Device and Host) ++ * In Host mode this bit contains handsake response to ++ * LPM transaction. ++ * In Device mode the response of the core to ++ * LPM transaction received is reflected in these two bits. ++ - 0x0 : ERROR (No handshake response) ++ - 0x1 : STALL ++ - 0x2 : NYET ++ - 0x3 : ACK ++ */ ++ unsigned lpm_resp:2; ++ /** Port Sleep Status (SlpSts) (Device and Host) ++ * This bit is set as long as a Sleep condition ++ * is present on the USB bus. ++ */ ++ unsigned prt_sleep_sts:1; ++ /** Sleep State Resume OK (L1ResumeOK) (Device and Host) ++ * Indicates that the application or host ++ * can start resume from Sleep state. ++ */ ++ unsigned sleep_state_resumeok:1; ++ /** LPM channel Index (LPM_Chnl_Indx) (Host) ++ * The channel number on which the LPM transaction ++ * has to be applied while sending ++ * an LPM transaction to the local device. ++ */ ++ unsigned lpm_chan_index:4; ++ /** LPM Retry Count (LPM_Retry_Cnt) (Host) ++ * Number host retries that would be performed ++ * if the device response was not valid response. ++ */ ++ unsigned retry_count:3; ++ /** Send LPM Transaction (SndLPM) (Host) ++ * When set by application software, ++ * an LPM transaction containing two tokens ++ * is sent. ++ */ ++ unsigned send_lpm:1; ++ /** LPM Retry status (LPM_RetryCnt_Sts) (Host) ++ * Number of LPM Host Retries still remaining ++ * to be transmitted for the current LPM sequence ++ */ ++ unsigned retry_count_sts:3; ++ unsigned reserved28_29:2; ++ /** In host mode once this bit is set, the host ++ * configures to drive the HSIC Idle state on the bus. ++ * It then waits for the device to initiate the Connect sequence. ++ * In device mode once this bit is set, the device waits for ++ * the HSIC Idle line state on the bus. Upon receving the Idle ++ * line state, it initiates the HSIC Connect sequence. ++ */ ++ unsigned hsic_connect:1; ++ /** This bit overrides and functionally inverts ++ * the if_select_hsic input port signal. ++ */ ++ unsigned inv_sel_hsic:1; ++ } b; ++} glpmcfg_data_t; ++ ++/** ++ * This union represents the bit fields of the Core ADP Timer, Control and ++ * Status Register (ADPTIMCTLSTS). Set the bits using bit fields then write ++ * the <i>d32</i> value to the register. ++ */ ++typedef union adpctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Probe Discharge (PRB_DSCHG) ++ * These bits set the times for TADP_DSCHG. ++ * These bits are defined as follows: ++ * 2'b00 - 4 msec ++ * 2'b01 - 8 msec ++ * 2'b10 - 16 msec ++ * 2'b11 - 32 msec ++ */ ++ unsigned prb_dschg:2; ++ /** Probe Delta (PRB_DELTA) ++ * These bits set the resolution for RTIM value. ++ * The bits are defined in units of 32 kHz clock cycles as follows: ++ * 2'b00 - 1 cycles ++ * 2'b01 - 2 cycles ++ * 2'b10 - 3 cycles ++ * 2'b11 - 4 cycles ++ * For example if this value is chosen to 2'b01, it means that RTIM ++ * increments for every 3(three) 32Khz clock cycles. ++ */ ++ unsigned prb_delta:2; ++ /** Probe Period (PRB_PER) ++ * These bits sets the TADP_PRD as shown in Figure 4 as follows: ++ * 2'b00 - 0.625 to 0.925 sec (typical 0.775 sec) ++ * 2'b01 - 1.25 to 1.85 sec (typical 1.55 sec) ++ * 2'b10 - 1.9 to 2.6 sec (typical 2.275 sec) ++ * 2'b11 - Reserved ++ */ ++ unsigned prb_per:2; ++ /** These bits capture the latest time it took for VBUS to ramp from ++ * VADP_SINK to VADP_PRB. ++ * 0x000 - 1 cycles ++ * 0x001 - 2 cycles ++ * 0x002 - 3 cycles ++ * etc ++ * 0x7FF - 2048 cycles ++ * A time of 1024 cycles at 32 kHz corresponds to a time of 32 msec. ++ */ ++ unsigned rtim:11; ++ /** Enable Probe (EnaPrb) ++ * When programmed to 1'b1, the core performs a probe operation. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned enaprb:1; ++ /** Enable Sense (EnaSns) ++ * When programmed to 1'b1, the core performs a Sense operation. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned enasns:1; ++ /** ADP Reset (ADPRes) ++ * When set, ADP controller is reset. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned adpres:1; ++ /** ADP Enable (ADPEn) ++ * When set, the core performs either ADP probing or sensing ++ * based on EnaPrb or EnaSns. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned adpen:1; ++ /** ADP Probe Interrupt (ADP_PRB_INT) ++ * When this bit is set, it means that the VBUS ++ * voltage is greater than VADP_PRB or VADP_PRB is reached. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned adp_prb_int:1; ++ /** ++ * ADP Sense Interrupt (ADP_SNS_INT) ++ * When this bit is set, it means that the VBUS voltage is greater than ++ * VADP_SNS value or VADP_SNS is reached. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned adp_sns_int:1; ++ /** ADP Tomeout Interrupt (ADP_TMOUT_INT) ++ * This bit is relevant only for an ADP probe. ++ * When this bit is set, it means that the ramp time has ++ * completed ie ADPCTL.RTIM has reached its terminal value ++ * of 0x7FF. This is a debug feature that allows software ++ * to read the ramp time after each cycle. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned adp_tmout_int:1; ++ /** ADP Probe Interrupt Mask (ADP_PRB_INT_MSK) ++ * When this bit is set, it unmasks the interrupt due to ADP_PRB_INT. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned adp_prb_int_msk:1; ++ /** ADP Sense Interrupt Mask (ADP_SNS_INT_MSK) ++ * When this bit is set, it unmasks the interrupt due to ADP_SNS_INT. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned adp_sns_int_msk:1; ++ /** ADP Timoeout Interrupt Mask (ADP_TMOUT_MSK) ++ * When this bit is set, it unmasks the interrupt due to ADP_TMOUT_INT. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned adp_tmout_int_msk:1; ++ /** Access Request ++ * 2'b00 - Read/Write Valid (updated by the core) ++ * 2'b01 - Read ++ * 2'b00 - Write ++ * 2'b00 - Reserved ++ */ ++ unsigned ar:2; ++ /** Reserved */ ++ unsigned reserved29_31:3; ++ } b; ++} adpctl_data_t; ++ ++//////////////////////////////////////////// ++// Device Registers ++/** ++ * Device Global Registers. <i>Offsets 800h-BFFh</i> ++ * ++ * The following structures define the size and relative field offsets ++ * for the Device Mode Registers. ++ * ++ * <i>These registers are visible only in Device mode and must not be ++ * accessed in Host mode, as the results are unknown.</i> ++ */ ++typedef struct dwc_otg_dev_global_regs { ++ /** Device Configuration Register. <i>Offset 800h</i> */ ++ volatile uint32_t dcfg; ++ /** Device Control Register. <i>Offset: 804h</i> */ ++ volatile uint32_t dctl; ++ /** Device Status Register (Read Only). <i>Offset: 808h</i> */ ++ volatile uint32_t dsts; ++ /** Reserved. <i>Offset: 80Ch</i> */ ++ uint32_t unused; ++ /** Device IN Endpoint Common Interrupt Mask ++ * Register. <i>Offset: 810h</i> */ ++ volatile uint32_t diepmsk; ++ /** Device OUT Endpoint Common Interrupt Mask ++ * Register. <i>Offset: 814h</i> */ ++ volatile uint32_t doepmsk; ++ /** Device All Endpoints Interrupt Register. <i>Offset: 818h</i> */ ++ volatile uint32_t daint; ++ /** Device All Endpoints Interrupt Mask Register. <i>Offset: ++ * 81Ch</i> */ ++ volatile uint32_t daintmsk; ++ /** Device IN Token Queue Read Register-1 (Read Only). ++ * <i>Offset: 820h</i> */ ++ volatile uint32_t dtknqr1; ++ /** Device IN Token Queue Read Register-2 (Read Only). ++ * <i>Offset: 824h</i> */ ++ volatile uint32_t dtknqr2; ++ /** Device VBUS discharge Register. <i>Offset: 828h</i> */ ++ volatile uint32_t dvbusdis; ++ /** Device VBUS Pulse Register. <i>Offset: 82Ch</i> */ ++ volatile uint32_t dvbuspulse; ++ /** Device IN Token Queue Read Register-3 (Read Only). / ++ * Device Thresholding control register (Read/Write) ++ * <i>Offset: 830h</i> */ ++ volatile uint32_t dtknqr3_dthrctl; ++ /** Device IN Token Queue Read Register-4 (Read Only). / ++ * Device IN EPs empty Inr. Mask Register (Read/Write) ++ * <i>Offset: 834h</i> */ ++ volatile uint32_t dtknqr4_fifoemptymsk; ++ /** Device Each Endpoint Interrupt Register (Read Only). / ++ * <i>Offset: 838h</i> */ ++ volatile uint32_t deachint; ++ /** Device Each Endpoint Interrupt mask Register (Read/Write). / ++ * <i>Offset: 83Ch</i> */ ++ volatile uint32_t deachintmsk; ++ /** Device Each In Endpoint Interrupt mask Register (Read/Write). / ++ * <i>Offset: 840h</i> */ ++ volatile uint32_t diepeachintmsk[MAX_EPS_CHANNELS]; ++ /** Device Each Out Endpoint Interrupt mask Register (Read/Write). / ++ * <i>Offset: 880h</i> */ ++ volatile uint32_t doepeachintmsk[MAX_EPS_CHANNELS]; ++} dwc_otg_device_global_regs_t; ++ ++/** ++ * This union represents the bit fields in the Device Configuration ++ * Register. Read the register into the <i>d32</i> member then ++ * set/clear the bits using the <i>b</i>it elements. Write the ++ * <i>d32</i> member to the dcfg register. ++ */ ++typedef union dcfg_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Device Speed */ ++ unsigned devspd:2; ++ /** Non Zero Length Status OUT Handshake */ ++ unsigned nzstsouthshk:1; ++#define DWC_DCFG_SEND_STALL 1 ++ ++ unsigned ena32khzs:1; ++ /** Device Addresses */ ++ unsigned devaddr:7; ++ /** Periodic Frame Interval */ ++ unsigned perfrint:2; ++#define DWC_DCFG_FRAME_INTERVAL_80 0 ++#define DWC_DCFG_FRAME_INTERVAL_85 1 ++#define DWC_DCFG_FRAME_INTERVAL_90 2 ++#define DWC_DCFG_FRAME_INTERVAL_95 3 ++ ++ /** Enable Device OUT NAK for bulk in DDMA mode */ ++ unsigned endevoutnak:1; ++ ++ unsigned reserved14_17:4; ++ /** In Endpoint Mis-match count */ ++ unsigned epmscnt:5; ++ /** Enable Descriptor DMA in Device mode */ ++ unsigned descdma:1; ++ unsigned perschintvl:2; ++ unsigned resvalid:6; ++ } b; ++} dcfg_data_t; ++ ++/** ++ * This union represents the bit fields in the Device Control ++ * Register. Read the register into the <i>d32</i> member then ++ * set/clear the bits using the <i>b</i>it elements. ++ */ ++typedef union dctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Remote Wakeup */ ++ unsigned rmtwkupsig:1; ++ /** Soft Disconnect */ ++ unsigned sftdiscon:1; ++ /** Global Non-Periodic IN NAK Status */ ++ unsigned gnpinnaksts:1; ++ /** Global OUT NAK Status */ ++ unsigned goutnaksts:1; ++ /** Test Control */ ++ unsigned tstctl:3; ++ /** Set Global Non-Periodic IN NAK */ ++ unsigned sgnpinnak:1; ++ /** Clear Global Non-Periodic IN NAK */ ++ unsigned cgnpinnak:1; ++ /** Set Global OUT NAK */ ++ unsigned sgoutnak:1; ++ /** Clear Global OUT NAK */ ++ unsigned cgoutnak:1; ++ /** Power-On Programming Done */ ++ unsigned pwronprgdone:1; ++ /** Reserved */ ++ unsigned reserved:1; ++ /** Global Multi Count */ ++ unsigned gmc:2; ++ /** Ignore Frame Number for ISOC EPs */ ++ unsigned ifrmnum:1; ++ /** NAK on Babble */ ++ unsigned nakonbble:1; ++ /** Enable Continue on BNA */ ++ unsigned encontonbna:1; ++ ++ unsigned reserved18_31:14; ++ } b; ++} dctl_data_t; ++ ++/** ++ * This union represents the bit fields in the Device Status ++ * Register. Read the register into the <i>d32</i> member then ++ * set/clear the bits using the <i>b</i>it elements. ++ */ ++typedef union dsts_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Suspend Status */ ++ unsigned suspsts:1; ++ /** Enumerated Speed */ ++ unsigned enumspd:2; ++#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0 ++#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1 ++#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ 2 ++#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ 3 ++ /** Erratic Error */ ++ unsigned errticerr:1; ++ unsigned reserved4_7:4; ++ /** Frame or Microframe Number of the received SOF */ ++ unsigned soffn:14; ++ unsigned reserved22_31:10; ++ } b; ++} dsts_data_t; ++ ++/** ++ * This union represents the bit fields in the Device IN EP Interrupt ++ * Register and the Device IN EP Common Mask Register. ++ * ++ * - Read the register into the <i>d32</i> member then set/clear the ++ * bits using the <i>b</i>it elements. ++ */ ++typedef union diepint_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Transfer complete mask */ ++ unsigned xfercompl:1; ++ /** Endpoint disable mask */ ++ unsigned epdisabled:1; ++ /** AHB Error mask */ ++ unsigned ahberr:1; ++ /** TimeOUT Handshake mask (non-ISOC EPs) */ ++ unsigned timeout:1; ++ /** IN Token received with TxF Empty mask */ ++ unsigned intktxfemp:1; ++ /** IN Token Received with EP mismatch mask */ ++ unsigned intknepmis:1; ++ /** IN Endpoint NAK Effective mask */ ++ unsigned inepnakeff:1; ++ /** Reserved */ ++ unsigned emptyintr:1; ++ ++ unsigned txfifoundrn:1; ++ ++ /** BNA Interrupt mask */ ++ unsigned bna:1; ++ ++ unsigned reserved10_12:3; ++ /** BNA Interrupt mask */ ++ unsigned nak:1; ++ ++ unsigned reserved14_31:18; ++ } b; ++} diepint_data_t; ++ ++/** ++ * This union represents the bit fields in the Device IN EP ++ * Common/Dedicated Interrupt Mask Register. ++ */ ++typedef union diepint_data diepmsk_data_t; ++ ++/** ++ * This union represents the bit fields in the Device OUT EP Interrupt ++ * Registerand Device OUT EP Common Interrupt Mask Register. ++ * ++ * - Read the register into the <i>d32</i> member then set/clear the ++ * bits using the <i>b</i>it elements. ++ */ ++typedef union doepint_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Transfer complete */ ++ unsigned xfercompl:1; ++ /** Endpoint disable */ ++ unsigned epdisabled:1; ++ /** AHB Error */ ++ unsigned ahberr:1; ++ /** Setup Phase Done (contorl EPs) */ ++ unsigned setup:1; ++ /** OUT Token Received when Endpoint Disabled */ ++ unsigned outtknepdis:1; ++ ++ unsigned stsphsercvd:1; ++ /** Back-to-Back SETUP Packets Received */ ++ unsigned back2backsetup:1; ++ ++ unsigned reserved7:1; ++ /** OUT packet Error */ ++ unsigned outpkterr:1; ++ /** BNA Interrupt */ ++ unsigned bna:1; ++ ++ unsigned reserved10:1; ++ /** Packet Drop Status */ ++ unsigned pktdrpsts:1; ++ /** Babble Interrupt */ ++ unsigned babble:1; ++ /** NAK Interrupt */ ++ unsigned nak:1; ++ /** NYET Interrupt */ ++ unsigned nyet:1; ++ /** Bit indicating setup packet received */ ++ unsigned sr:1; ++ ++ unsigned reserved16_31:16; ++ } b; ++} doepint_data_t; ++ ++/** ++ * This union represents the bit fields in the Device OUT EP ++ * Common/Dedicated Interrupt Mask Register. ++ */ ++typedef union doepint_data doepmsk_data_t; ++ ++/** ++ * This union represents the bit fields in the Device All EP Interrupt ++ * and Mask Registers. ++ * - Read the register into the <i>d32</i> member then set/clear the ++ * bits using the <i>b</i>it elements. ++ */ ++typedef union daint_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** IN Endpoint bits */ ++ unsigned in:16; ++ /** OUT Endpoint bits */ ++ unsigned out:16; ++ } ep; ++ struct { ++ /** IN Endpoint bits */ ++ unsigned inep0:1; ++ unsigned inep1:1; ++ unsigned inep2:1; ++ unsigned inep3:1; ++ unsigned inep4:1; ++ unsigned inep5:1; ++ unsigned inep6:1; ++ unsigned inep7:1; ++ unsigned inep8:1; ++ unsigned inep9:1; ++ unsigned inep10:1; ++ unsigned inep11:1; ++ unsigned inep12:1; ++ unsigned inep13:1; ++ unsigned inep14:1; ++ unsigned inep15:1; ++ /** OUT Endpoint bits */ ++ unsigned outep0:1; ++ unsigned outep1:1; ++ unsigned outep2:1; ++ unsigned outep3:1; ++ unsigned outep4:1; ++ unsigned outep5:1; ++ unsigned outep6:1; ++ unsigned outep7:1; ++ unsigned outep8:1; ++ unsigned outep9:1; ++ unsigned outep10:1; ++ unsigned outep11:1; ++ unsigned outep12:1; ++ unsigned outep13:1; ++ unsigned outep14:1; ++ unsigned outep15:1; ++ } b; ++} daint_data_t; ++ ++/** ++ * This union represents the bit fields in the Device IN Token Queue ++ * Read Registers. ++ * - Read the register into the <i>d32</i> member. ++ * - READ-ONLY Register ++ */ ++typedef union dtknq1_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** In Token Queue Write Pointer */ ++ unsigned intknwptr:5; ++ /** Reserved */ ++ unsigned reserved05_06:2; ++ /** write pointer has wrapped. */ ++ unsigned wrap_bit:1; ++ /** EP Numbers of IN Tokens 0 ... 4 */ ++ unsigned epnums0_5:24; ++ } b; ++} dtknq1_data_t; ++ ++/** ++ * This union represents Threshold control Register ++ * - Read and write the register into the <i>d32</i> member. ++ * - READ-WRITABLE Register ++ */ ++typedef union dthrctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** non ISO Tx Thr. Enable */ ++ unsigned non_iso_thr_en:1; ++ /** ISO Tx Thr. Enable */ ++ unsigned iso_thr_en:1; ++ /** Tx Thr. Length */ ++ unsigned tx_thr_len:9; ++ /** AHB Threshold ratio */ ++ unsigned ahb_thr_ratio:2; ++ /** Reserved */ ++ unsigned reserved13_15:3; ++ /** Rx Thr. Enable */ ++ unsigned rx_thr_en:1; ++ /** Rx Thr. Length */ ++ unsigned rx_thr_len:9; ++ unsigned reserved26:1; ++ /** Arbiter Parking Enable*/ ++ unsigned arbprken:1; ++ /** Reserved */ ++ unsigned reserved28_31:4; ++ } b; ++} dthrctl_data_t; ++ ++/** ++ * Device Logical IN Endpoint-Specific Registers. <i>Offsets ++ * 900h-AFCh</i> ++ * ++ * There will be one set of endpoint registers per logical endpoint ++ * implemented. ++ * ++ * <i>These registers are visible only in Device mode and must not be ++ * accessed in Host mode, as the results are unknown.</i> ++ */ ++typedef struct dwc_otg_dev_in_ep_regs { ++ /** Device IN Endpoint Control Register. <i>Offset:900h + ++ * (ep_num * 20h) + 00h</i> */ ++ volatile uint32_t diepctl; ++ /** Reserved. <i>Offset:900h + (ep_num * 20h) + 04h</i> */ ++ uint32_t reserved04; ++ /** Device IN Endpoint Interrupt Register. <i>Offset:900h + ++ * (ep_num * 20h) + 08h</i> */ ++ volatile uint32_t diepint; ++ /** Reserved. <i>Offset:900h + (ep_num * 20h) + 0Ch</i> */ ++ uint32_t reserved0C; ++ /** Device IN Endpoint Transfer Size ++ * Register. <i>Offset:900h + (ep_num * 20h) + 10h</i> */ ++ volatile uint32_t dieptsiz; ++ /** Device IN Endpoint DMA Address Register. <i>Offset:900h + ++ * (ep_num * 20h) + 14h</i> */ ++ volatile uint32_t diepdma; ++ /** Device IN Endpoint Transmit FIFO Status Register. <i>Offset:900h + ++ * (ep_num * 20h) + 18h</i> */ ++ volatile uint32_t dtxfsts; ++ /** Device IN Endpoint DMA Buffer Register. <i>Offset:900h + ++ * (ep_num * 20h) + 1Ch</i> */ ++ volatile uint32_t diepdmab; ++} dwc_otg_dev_in_ep_regs_t; ++ ++/** ++ * Device Logical OUT Endpoint-Specific Registers. <i>Offsets: ++ * B00h-CFCh</i> ++ * ++ * There will be one set of endpoint registers per logical endpoint ++ * implemented. ++ * ++ * <i>These registers are visible only in Device mode and must not be ++ * accessed in Host mode, as the results are unknown.</i> ++ */ ++typedef struct dwc_otg_dev_out_ep_regs { ++ /** Device OUT Endpoint Control Register. <i>Offset:B00h + ++ * (ep_num * 20h) + 00h</i> */ ++ volatile uint32_t doepctl; ++ /** Reserved. <i>Offset:B00h + (ep_num * 20h) + 04h</i> */ ++ uint32_t reserved04; ++ /** Device OUT Endpoint Interrupt Register. <i>Offset:B00h + ++ * (ep_num * 20h) + 08h</i> */ ++ volatile uint32_t doepint; ++ /** Reserved. <i>Offset:B00h + (ep_num * 20h) + 0Ch</i> */ ++ uint32_t reserved0C; ++ /** Device OUT Endpoint Transfer Size Register. <i>Offset: ++ * B00h + (ep_num * 20h) + 10h</i> */ ++ volatile uint32_t doeptsiz; ++ /** Device OUT Endpoint DMA Address Register. <i>Offset:B00h ++ * + (ep_num * 20h) + 14h</i> */ ++ volatile uint32_t doepdma; ++ /** Reserved. <i>Offset:B00h + * (ep_num * 20h) + 18h</i> */ ++ uint32_t unused; ++ /** Device OUT Endpoint DMA Buffer Register. <i>Offset:B00h ++ * + (ep_num * 20h) + 1Ch</i> */ ++ uint32_t doepdmab; ++} dwc_otg_dev_out_ep_regs_t; ++ ++/** ++ * This union represents the bit fields in the Device EP Control ++ * Register. Read the register into the <i>d32</i> member then ++ * set/clear the bits using the <i>b</i>it elements. ++ */ ++typedef union depctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Maximum Packet Size ++ * IN/OUT EPn ++ * IN/OUT EP0 - 2 bits ++ * 2'b00: 64 Bytes ++ * 2'b01: 32 ++ * 2'b10: 16 ++ * 2'b11: 8 */ ++ unsigned mps:11; ++#define DWC_DEP0CTL_MPS_64 0 ++#define DWC_DEP0CTL_MPS_32 1 ++#define DWC_DEP0CTL_MPS_16 2 ++#define DWC_DEP0CTL_MPS_8 3 ++ ++ /** Next Endpoint ++ * IN EPn/IN EP0 ++ * OUT EPn/OUT EP0 - reserved */ ++ unsigned nextep:4; ++ ++ /** USB Active Endpoint */ ++ unsigned usbactep:1; ++ ++ /** Endpoint DPID (INTR/Bulk IN and OUT endpoints) ++ * This field contains the PID of the packet going to ++ * be received or transmitted on this endpoint. The ++ * application should program the PID of the first ++ * packet going to be received or transmitted on this ++ * endpoint , after the endpoint is ++ * activated. Application use the SetD1PID and ++ * SetD0PID fields of this register to program either ++ * D0 or D1 PID. ++ * ++ * The encoding for this field is ++ * - 0: D0 ++ * - 1: D1 ++ */ ++ unsigned dpid:1; ++ ++ /** NAK Status */ ++ unsigned naksts:1; ++ ++ /** Endpoint Type ++ * 2'b00: Control ++ * 2'b01: Isochronous ++ * 2'b10: Bulk ++ * 2'b11: Interrupt */ ++ unsigned eptype:2; ++ ++ /** Snoop Mode ++ * OUT EPn/OUT EP0 ++ * IN EPn/IN EP0 - reserved */ ++ unsigned snp:1; ++ ++ /** Stall Handshake */ ++ unsigned stall:1; ++ ++ /** Tx Fifo Number ++ * IN EPn/IN EP0 ++ * OUT EPn/OUT EP0 - reserved */ ++ unsigned txfnum:4; ++ ++ /** Clear NAK */ ++ unsigned cnak:1; ++ /** Set NAK */ ++ unsigned snak:1; ++ /** Set DATA0 PID (INTR/Bulk IN and OUT endpoints) ++ * Writing to this field sets the Endpoint DPID (DPID) ++ * field in this register to DATA0. Set Even ++ * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints) ++ * Writing to this field sets the Even/Odd ++ * (micro)frame (EO_FrNum) field to even (micro) ++ * frame. ++ */ ++ unsigned setd0pid:1; ++ /** Set DATA1 PID (INTR/Bulk IN and OUT endpoints) ++ * Writing to this field sets the Endpoint DPID (DPID) ++ * field in this register to DATA1 Set Odd ++ * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints) ++ * Writing to this field sets the Even/Odd ++ * (micro)frame (EO_FrNum) field to odd (micro) frame. ++ */ ++ unsigned setd1pid:1; ++ ++ /** Endpoint Disable */ ++ unsigned epdis:1; ++ /** Endpoint Enable */ ++ unsigned epena:1; ++ } b; ++} depctl_data_t; ++ ++/** ++ * This union represents the bit fields in the Device EP Transfer ++ * Size Register. Read the register into the <i>d32</i> member then ++ * set/clear the bits using the <i>b</i>it elements. ++ */ ++typedef union deptsiz_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Transfer size */ ++ unsigned xfersize:19; ++/** Max packet count for EP (pow(2,10)-1) */ ++#define MAX_PKT_CNT 1023 ++ /** Packet Count */ ++ unsigned pktcnt:10; ++ /** Multi Count - Periodic IN endpoints */ ++ unsigned mc:2; ++ unsigned reserved:1; ++ } b; ++} deptsiz_data_t; ++ ++/** ++ * This union represents the bit fields in the Device EP 0 Transfer ++ * Size Register. Read the register into the <i>d32</i> member then ++ * set/clear the bits using the <i>b</i>it elements. ++ */ ++typedef union deptsiz0_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Transfer size */ ++ unsigned xfersize:7; ++ /** Reserved */ ++ unsigned reserved7_18:12; ++ /** Packet Count */ ++ unsigned pktcnt:2; ++ /** Reserved */ ++ unsigned reserved21_28:8; ++ /**Setup Packet Count (DOEPTSIZ0 Only) */ ++ unsigned supcnt:2; ++ unsigned reserved31; ++ } b; ++} deptsiz0_data_t; ++ ++///////////////////////////////////////////////// ++// DMA Descriptor Specific Structures ++// ++ ++/** Buffer status definitions */ ++ ++#define BS_HOST_READY 0x0 ++#define BS_DMA_BUSY 0x1 ++#define BS_DMA_DONE 0x2 ++#define BS_HOST_BUSY 0x3 ++ ++/** Receive/Transmit status definitions */ ++ ++#define RTS_SUCCESS 0x0 ++#define RTS_BUFFLUSH 0x1 ++#define RTS_RESERVED 0x2 ++#define RTS_BUFERR 0x3 ++ ++/** ++ * This union represents the bit fields in the DMA Descriptor ++ * status quadlet. Read the quadlet into the <i>d32</i> member then ++ * set/clear the bits using the <i>b</i>it, <i>b_iso_out</i> and ++ * <i>b_iso_in</i> elements. ++ */ ++typedef union dev_dma_desc_sts { ++ /** raw register data */ ++ uint32_t d32; ++ /** quadlet bits */ ++ struct { ++ /** Received number of bytes */ ++ unsigned bytes:16; ++ /** NAK bit - only for OUT EPs */ ++ unsigned nak:1; ++ unsigned reserved17_22:6; ++ /** Multiple Transfer - only for OUT EPs */ ++ unsigned mtrf:1; ++ /** Setup Packet received - only for OUT EPs */ ++ unsigned sr:1; ++ /** Interrupt On Complete */ ++ unsigned ioc:1; ++ /** Short Packet */ ++ unsigned sp:1; ++ /** Last */ ++ unsigned l:1; ++ /** Receive Status */ ++ unsigned sts:2; ++ /** Buffer Status */ ++ unsigned bs:2; ++ } b; ++ ++//#ifdef DWC_EN_ISOC ++ /** iso out quadlet bits */ ++ struct { ++ /** Received number of bytes */ ++ unsigned rxbytes:11; ++ ++ unsigned reserved11:1; ++ /** Frame Number */ ++ unsigned framenum:11; ++ /** Received ISO Data PID */ ++ unsigned pid:2; ++ /** Interrupt On Complete */ ++ unsigned ioc:1; ++ /** Short Packet */ ++ unsigned sp:1; ++ /** Last */ ++ unsigned l:1; ++ /** Receive Status */ ++ unsigned rxsts:2; ++ /** Buffer Status */ ++ unsigned bs:2; ++ } b_iso_out; ++ ++ /** iso in quadlet bits */ ++ struct { ++ /** Transmited number of bytes */ ++ unsigned txbytes:12; ++ /** Frame Number */ ++ unsigned framenum:11; ++ /** Transmited ISO Data PID */ ++ unsigned pid:2; ++ /** Interrupt On Complete */ ++ unsigned ioc:1; ++ /** Short Packet */ ++ unsigned sp:1; ++ /** Last */ ++ unsigned l:1; ++ /** Transmit Status */ ++ unsigned txsts:2; ++ /** Buffer Status */ ++ unsigned bs:2; ++ } b_iso_in; ++//#endif /* DWC_EN_ISOC */ ++} dev_dma_desc_sts_t; ++ ++/** ++ * DMA Descriptor structure ++ * ++ * DMA Descriptor structure contains two quadlets: ++ * Status quadlet and Data buffer pointer. ++ */ ++typedef struct dwc_otg_dev_dma_desc { ++ /** DMA Descriptor status quadlet */ ++ dev_dma_desc_sts_t status; ++ /** DMA Descriptor data buffer pointer */ ++ uint32_t buf; ++} dwc_otg_dev_dma_desc_t; ++ ++/** ++ * The dwc_otg_dev_if structure contains information needed to manage ++ * the DWC_otg controller acting in device mode. It represents the ++ * programming view of the device-specific aspects of the controller. ++ */ ++typedef struct dwc_otg_dev_if { ++ /** Pointer to device Global registers. ++ * Device Global Registers starting at offset 800h ++ */ ++ dwc_otg_device_global_regs_t *dev_global_regs; ++#define DWC_DEV_GLOBAL_REG_OFFSET 0x800 ++ ++ /** ++ * Device Logical IN Endpoint-Specific Registers 900h-AFCh ++ */ ++ dwc_otg_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS]; ++#define DWC_DEV_IN_EP_REG_OFFSET 0x900 ++#define DWC_EP_REG_OFFSET 0x20 ++ ++ /** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */ ++ dwc_otg_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS]; ++#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00 ++ ++ /* Device configuration information */ ++ uint8_t speed; /**< Device Speed 0: Unknown, 1: LS, 2:FS, 3: HS */ ++ uint8_t num_in_eps; /**< Number # of Tx EP range: 0-15 exept ep0 */ ++ uint8_t num_out_eps; /**< Number # of Rx EP range: 0-15 exept ep 0*/ ++ ++ /** Size of periodic FIFOs (Bytes) */ ++ uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS]; ++ ++ /** Size of Tx FIFOs (Bytes) */ ++ uint16_t tx_fifo_size[MAX_TX_FIFOS]; ++ ++ /** Thresholding enable flags and length varaiables **/ ++ uint16_t rx_thr_en; ++ uint16_t iso_tx_thr_en; ++ uint16_t non_iso_tx_thr_en; ++ ++ uint16_t rx_thr_length; ++ uint16_t tx_thr_length; ++ ++ /** ++ * Pointers to the DMA Descriptors for EP0 Control ++ * transfers (virtual and physical) ++ */ ++ ++ /** 2 descriptors for SETUP packets */ ++ dwc_dma_t dma_setup_desc_addr[2]; ++ dwc_otg_dev_dma_desc_t *setup_desc_addr[2]; ++ ++ /** Pointer to Descriptor with latest SETUP packet */ ++ dwc_otg_dev_dma_desc_t *psetup; ++ ++ /** Index of current SETUP handler descriptor */ ++ uint32_t setup_desc_index; ++ ++ /** Descriptor for Data In or Status In phases */ ++ dwc_dma_t dma_in_desc_addr; ++ dwc_otg_dev_dma_desc_t *in_desc_addr; ++ ++ /** Descriptor for Data Out or Status Out phases */ ++ dwc_dma_t dma_out_desc_addr; ++ dwc_otg_dev_dma_desc_t *out_desc_addr; ++ ++ /** Setup Packet Detected - if set clear NAK when queueing */ ++ uint32_t spd; ++ /** Isoc ep pointer on which incomplete happens */ ++ void *isoc_ep; ++ ++} dwc_otg_dev_if_t; ++ ++///////////////////////////////////////////////// ++// Host Mode Register Structures ++// ++/** ++ * The Host Global Registers structure defines the size and relative ++ * field offsets for the Host Mode Global Registers. Host Global ++ * Registers offsets 400h-7FFh. ++*/ ++typedef struct dwc_otg_host_global_regs { ++ /** Host Configuration Register. <i>Offset: 400h</i> */ ++ volatile uint32_t hcfg; ++ /** Host Frame Interval Register. <i>Offset: 404h</i> */ ++ volatile uint32_t hfir; ++ /** Host Frame Number / Frame Remaining Register. <i>Offset: 408h</i> */ ++ volatile uint32_t hfnum; ++ /** Reserved. <i>Offset: 40Ch</i> */ ++ uint32_t reserved40C; ++ /** Host Periodic Transmit FIFO/ Queue Status Register. <i>Offset: 410h</i> */ ++ volatile uint32_t hptxsts; ++ /** Host All Channels Interrupt Register. <i>Offset: 414h</i> */ ++ volatile uint32_t haint; ++ /** Host All Channels Interrupt Mask Register. <i>Offset: 418h</i> */ ++ volatile uint32_t haintmsk; ++ /** Host Frame List Base Address Register . <i>Offset: 41Ch</i> */ ++ volatile uint32_t hflbaddr; ++} dwc_otg_host_global_regs_t; ++ ++/** ++ * This union represents the bit fields in the Host Configuration Register. ++ * Read the register into the <i>d32</i> member then set/clear the bits using ++ * the <i>b</i>it elements. Write the <i>d32</i> member to the hcfg register. ++ */ ++typedef union hcfg_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ /** FS/LS Phy Clock Select */ ++ unsigned fslspclksel:2; ++#define DWC_HCFG_30_60_MHZ 0 ++#define DWC_HCFG_48_MHZ 1 ++#define DWC_HCFG_6_MHZ 2 ++ ++ /** FS/LS Only Support */ ++ unsigned fslssupp:1; ++ unsigned reserved3_6:4; ++ /** Enable 32-KHz Suspend Mode */ ++ unsigned ena32khzs:1; ++ /** Resume Validation Periiod */ ++ unsigned resvalid:8; ++ unsigned reserved16_22:7; ++ /** Enable Scatter/gather DMA in Host mode */ ++ unsigned descdma:1; ++ /** Frame List Entries */ ++ unsigned frlisten:2; ++ /** Enable Periodic Scheduling */ ++ unsigned perschedena:1; ++ unsigned reserved27_30:4; ++ unsigned modechtimen:1; ++ } b; ++} hcfg_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Frame Remaing/Number ++ * Register. ++ */ ++typedef union hfir_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ unsigned frint:16; ++ unsigned hfirrldctrl:1; ++ unsigned reserved:15; ++ } b; ++} hfir_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Frame Remaing/Number ++ * Register. ++ */ ++typedef union hfnum_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ unsigned frnum:16; ++#define DWC_HFNUM_MAX_FRNUM 0x3FFF ++ unsigned frrem:16; ++ } b; ++} hfnum_data_t; ++ ++typedef union hptxsts_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ unsigned ptxfspcavail:16; ++ unsigned ptxqspcavail:8; ++ /** Top of the Periodic Transmit Request Queue ++ * - bit 24 - Terminate (last entry for the selected channel) ++ * - bits 26:25 - Token Type ++ * - 2'b00 - Zero length ++ * - 2'b01 - Ping ++ * - 2'b10 - Disable ++ * - bits 30:27 - Channel Number ++ * - bit 31 - Odd/even microframe ++ */ ++ unsigned ptxqtop_terminate:1; ++ unsigned ptxqtop_token:2; ++ unsigned ptxqtop_chnum:4; ++ unsigned ptxqtop_odd:1; ++ } b; ++} hptxsts_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Port Control and Status ++ * Register. Read the register into the <i>d32</i> member then set/clear the ++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the ++ * hprt0 register. ++ */ ++typedef union hprt0_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned prtconnsts:1; ++ unsigned prtconndet:1; ++ unsigned prtena:1; ++ unsigned prtenchng:1; ++ unsigned prtovrcurract:1; ++ unsigned prtovrcurrchng:1; ++ unsigned prtres:1; ++ unsigned prtsusp:1; ++ unsigned prtrst:1; ++ unsigned reserved9:1; ++ unsigned prtlnsts:2; ++ unsigned prtpwr:1; ++ unsigned prttstctl:4; ++ unsigned prtspd:2; ++#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0 ++#define DWC_HPRT0_PRTSPD_FULL_SPEED 1 ++#define DWC_HPRT0_PRTSPD_LOW_SPEED 2 ++ unsigned reserved19_31:13; ++ } b; ++} hprt0_data_t; ++ ++/** ++ * This union represents the bit fields in the Host All Interrupt ++ * Register. ++ */ ++typedef union haint_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned ch0:1; ++ unsigned ch1:1; ++ unsigned ch2:1; ++ unsigned ch3:1; ++ unsigned ch4:1; ++ unsigned ch5:1; ++ unsigned ch6:1; ++ unsigned ch7:1; ++ unsigned ch8:1; ++ unsigned ch9:1; ++ unsigned ch10:1; ++ unsigned ch11:1; ++ unsigned ch12:1; ++ unsigned ch13:1; ++ unsigned ch14:1; ++ unsigned ch15:1; ++ unsigned reserved:16; ++ } b; ++ ++ struct { ++ unsigned chint:16; ++ unsigned reserved:16; ++ } b2; ++} haint_data_t; ++ ++/** ++ * This union represents the bit fields in the Host All Interrupt ++ * Register. ++ */ ++typedef union haintmsk_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned ch0:1; ++ unsigned ch1:1; ++ unsigned ch2:1; ++ unsigned ch3:1; ++ unsigned ch4:1; ++ unsigned ch5:1; ++ unsigned ch6:1; ++ unsigned ch7:1; ++ unsigned ch8:1; ++ unsigned ch9:1; ++ unsigned ch10:1; ++ unsigned ch11:1; ++ unsigned ch12:1; ++ unsigned ch13:1; ++ unsigned ch14:1; ++ unsigned ch15:1; ++ unsigned reserved:16; ++ } b; ++ ++ struct { ++ unsigned chint:16; ++ unsigned reserved:16; ++ } b2; ++} haintmsk_data_t; ++ ++/** ++ * Host Channel Specific Registers. <i>500h-5FCh</i> ++ */ ++typedef struct dwc_otg_hc_regs { ++ /** Host Channel 0 Characteristic Register. <i>Offset: 500h + (chan_num * 20h) + 00h</i> */ ++ volatile uint32_t hcchar; ++ /** Host Channel 0 Split Control Register. <i>Offset: 500h + (chan_num * 20h) + 04h</i> */ ++ volatile uint32_t hcsplt; ++ /** Host Channel 0 Interrupt Register. <i>Offset: 500h + (chan_num * 20h) + 08h</i> */ ++ volatile uint32_t hcint; ++ /** Host Channel 0 Interrupt Mask Register. <i>Offset: 500h + (chan_num * 20h) + 0Ch</i> */ ++ volatile uint32_t hcintmsk; ++ /** Host Channel 0 Transfer Size Register. <i>Offset: 500h + (chan_num * 20h) + 10h</i> */ ++ volatile uint32_t hctsiz; ++ /** Host Channel 0 DMA Address Register. <i>Offset: 500h + (chan_num * 20h) + 14h</i> */ ++ volatile uint32_t hcdma; ++ volatile uint32_t reserved; ++ /** Host Channel 0 DMA Buffer Address Register. <i>Offset: 500h + (chan_num * 20h) + 1Ch</i> */ ++ volatile uint32_t hcdmab; ++} dwc_otg_hc_regs_t; ++ ++/** ++ * This union represents the bit fields in the Host Channel Characteristics ++ * Register. Read the register into the <i>d32</i> member then set/clear the ++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the ++ * hcchar register. ++ */ ++typedef union hcchar_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ /** Maximum packet size in bytes */ ++ unsigned mps:11; ++ ++ /** Endpoint number */ ++ unsigned epnum:4; ++ ++ /** 0: OUT, 1: IN */ ++ unsigned epdir:1; ++ ++ unsigned reserved:1; ++ ++ /** 0: Full/high speed device, 1: Low speed device */ ++ unsigned lspddev:1; ++ ++ /** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */ ++ unsigned eptype:2; ++ ++ /** Packets per frame for periodic transfers. 0 is reserved. */ ++ unsigned multicnt:2; ++ ++ /** Device address */ ++ unsigned devaddr:7; ++ ++ /** ++ * Frame to transmit periodic transaction. ++ * 0: even, 1: odd ++ */ ++ unsigned oddfrm:1; ++ ++ /** Channel disable */ ++ unsigned chdis:1; ++ ++ /** Channel enable */ ++ unsigned chen:1; ++ } b; ++} hcchar_data_t; ++ ++typedef union hcsplt_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ /** Port Address */ ++ unsigned prtaddr:7; ++ ++ /** Hub Address */ ++ unsigned hubaddr:7; ++ ++ /** Transaction Position */ ++ unsigned xactpos:2; ++#define DWC_HCSPLIT_XACTPOS_MID 0 ++#define DWC_HCSPLIT_XACTPOS_END 1 ++#define DWC_HCSPLIT_XACTPOS_BEGIN 2 ++#define DWC_HCSPLIT_XACTPOS_ALL 3 ++ ++ /** Do Complete Split */ ++ unsigned compsplt:1; ++ ++ /** Reserved */ ++ unsigned reserved:14; ++ ++ /** Split Enble */ ++ unsigned spltena:1; ++ } b; ++} hcsplt_data_t; ++ ++/** ++ * This union represents the bit fields in the Host All Interrupt ++ * Register. ++ */ ++typedef union hcint_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Transfer Complete */ ++ unsigned xfercomp:1; ++ /** Channel Halted */ ++ unsigned chhltd:1; ++ /** AHB Error */ ++ unsigned ahberr:1; ++ /** STALL Response Received */ ++ unsigned stall:1; ++ /** NAK Response Received */ ++ unsigned nak:1; ++ /** ACK Response Received */ ++ unsigned ack:1; ++ /** NYET Response Received */ ++ unsigned nyet:1; ++ /** Transaction Err */ ++ unsigned xacterr:1; ++ /** Babble Error */ ++ unsigned bblerr:1; ++ /** Frame Overrun */ ++ unsigned frmovrun:1; ++ /** Data Toggle Error */ ++ unsigned datatglerr:1; ++ /** Buffer Not Available (only for DDMA mode) */ ++ unsigned bna:1; ++ /** Exessive transaction error (only for DDMA mode) */ ++ unsigned xcs_xact:1; ++ /** Frame List Rollover interrupt */ ++ unsigned frm_list_roll:1; ++ /** Reserved */ ++ unsigned reserved14_31:18; ++ } b; ++} hcint_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Channel Interrupt Mask ++ * Register. Read the register into the <i>d32</i> member then set/clear the ++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the ++ * hcintmsk register. ++ */ ++typedef union hcintmsk_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ unsigned xfercompl:1; ++ unsigned chhltd:1; ++ unsigned ahberr:1; ++ unsigned stall:1; ++ unsigned nak:1; ++ unsigned ack:1; ++ unsigned nyet:1; ++ unsigned xacterr:1; ++ unsigned bblerr:1; ++ unsigned frmovrun:1; ++ unsigned datatglerr:1; ++ unsigned bna:1; ++ unsigned xcs_xact:1; ++ unsigned frm_list_roll:1; ++ unsigned reserved14_31:18; ++ } b; ++} hcintmsk_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Channel Transfer Size ++ * Register. Read the register into the <i>d32</i> member then set/clear the ++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the ++ * hcchar register. ++ */ ++ ++typedef union hctsiz_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ /** Total transfer size in bytes */ ++ unsigned xfersize:19; ++ ++ /** Data packets to transfer */ ++ unsigned pktcnt:10; ++ ++ /** ++ * Packet ID for next data packet ++ * 0: DATA0 ++ * 1: DATA2 ++ * 2: DATA1 ++ * 3: MDATA (non-Control), SETUP (Control) ++ */ ++ unsigned pid:2; ++#define DWC_HCTSIZ_DATA0 0 ++#define DWC_HCTSIZ_DATA1 2 ++#define DWC_HCTSIZ_DATA2 1 ++#define DWC_HCTSIZ_MDATA 3 ++#define DWC_HCTSIZ_SETUP 3 ++ ++ /** Do PING protocol when 1 */ ++ unsigned dopng:1; ++ } b; ++ ++ /** register bits */ ++ struct { ++ /** Scheduling information */ ++ unsigned schinfo:8; ++ ++ /** Number of transfer descriptors. ++ * Max value: ++ * 64 in general, ++ * 256 only for HS isochronous endpoint. ++ */ ++ unsigned ntd:8; ++ ++ /** Data packets to transfer */ ++ unsigned reserved16_28:13; ++ ++ /** ++ * Packet ID for next data packet ++ * 0: DATA0 ++ * 1: DATA2 ++ * 2: DATA1 ++ * 3: MDATA (non-Control) ++ */ ++ unsigned pid:2; ++ ++ /** Do PING protocol when 1 */ ++ unsigned dopng:1; ++ } b_ddma; ++} hctsiz_data_t; ++ ++/** ++ * This union represents the bit fields in the Host DMA Address ++ * Register used in Descriptor DMA mode. ++ */ ++typedef union hcdma_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned reserved0_2:3; ++ /** Current Transfer Descriptor. Not used for ISOC */ ++ unsigned ctd:8; ++ /** Start Address of Descriptor List */ ++ unsigned dma_addr:21; ++ } b; ++} hcdma_data_t; ++ ++/** ++ * This union represents the bit fields in the DMA Descriptor ++ * status quadlet for host mode. Read the quadlet into the <i>d32</i> member then ++ * set/clear the bits using the <i>b</i>it elements. ++ */ ++typedef union host_dma_desc_sts { ++ /** raw register data */ ++ uint32_t d32; ++ /** quadlet bits */ ++ ++ /* for non-isochronous */ ++ struct { ++ /** Number of bytes */ ++ unsigned n_bytes:17; ++ /** QTD offset to jump when Short Packet received - only for IN EPs */ ++ unsigned qtd_offset:6; ++ /** ++ * Set to request the core to jump to alternate QTD if ++ * Short Packet received - only for IN EPs ++ */ ++ unsigned a_qtd:1; ++ /** ++ * Setup Packet bit. When set indicates that buffer contains ++ * setup packet. ++ */ ++ unsigned sup:1; ++ /** Interrupt On Complete */ ++ unsigned ioc:1; ++ /** End of List */ ++ unsigned eol:1; ++ unsigned reserved27:1; ++ /** Rx/Tx Status */ ++ unsigned sts:2; ++#define DMA_DESC_STS_PKTERR 1 ++ unsigned reserved30:1; ++ /** Active Bit */ ++ unsigned a:1; ++ } b; ++ /* for isochronous */ ++ struct { ++ /** Number of bytes */ ++ unsigned n_bytes:12; ++ unsigned reserved12_24:13; ++ /** Interrupt On Complete */ ++ unsigned ioc:1; ++ unsigned reserved26_27:2; ++ /** Rx/Tx Status */ ++ unsigned sts:2; ++ unsigned reserved30:1; ++ /** Active Bit */ ++ unsigned a:1; ++ } b_isoc; ++} host_dma_desc_sts_t; ++ ++#define MAX_DMA_DESC_SIZE 131071 ++#define MAX_DMA_DESC_NUM_GENERIC 64 ++#define MAX_DMA_DESC_NUM_HS_ISOC 256 ++#define MAX_FRLIST_EN_NUM 64 ++/** ++ * Host-mode DMA Descriptor structure ++ * ++ * DMA Descriptor structure contains two quadlets: ++ * Status quadlet and Data buffer pointer. ++ */ ++typedef struct dwc_otg_host_dma_desc { ++ /** DMA Descriptor status quadlet */ ++ host_dma_desc_sts_t status; ++ /** DMA Descriptor data buffer pointer */ ++ uint32_t buf; ++} dwc_otg_host_dma_desc_t; ++ ++/** OTG Host Interface Structure. ++ * ++ * The OTG Host Interface Structure structure contains information ++ * needed to manage the DWC_otg controller acting in host mode. It ++ * represents the programming view of the host-specific aspects of the ++ * controller. ++ */ ++typedef struct dwc_otg_host_if { ++ /** Host Global Registers starting at offset 400h.*/ ++ dwc_otg_host_global_regs_t *host_global_regs; ++#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400 ++ ++ /** Host Port 0 Control and Status Register */ ++ volatile uint32_t *hprt0; ++#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440 ++ ++ /** Host Channel Specific Registers at offsets 500h-5FCh. */ ++ dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS]; ++#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500 ++#define DWC_OTG_CHAN_REGS_OFFSET 0x20 ++ ++ /* Host configuration information */ ++ /** Number of Host Channels (range: 1-16) */ ++ uint8_t num_host_channels; ++ /** Periodic EPs supported (0: no, 1: yes) */ ++ uint8_t perio_eps_supported; ++ /** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */ ++ uint16_t perio_tx_fifo_size; ++ ++} dwc_otg_host_if_t; ++ ++/** ++ * This union represents the bit fields in the Power and Clock Gating Control ++ * Register. Read the register into the <i>d32</i> member then set/clear the ++ * bits using the <i>b</i>it elements. ++ */ ++typedef union pcgcctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ /** Stop Pclk */ ++ unsigned stoppclk:1; ++ /** Gate Hclk */ ++ unsigned gatehclk:1; ++ /** Power Clamp */ ++ unsigned pwrclmp:1; ++ /** Reset Power Down Modules */ ++ unsigned rstpdwnmodule:1; ++ /** Reserved */ ++ unsigned reserved:1; ++ /** Enable Sleep Clock Gating (Enbl_L1Gating) */ ++ unsigned enbl_sleep_gating:1; ++ /** PHY In Sleep (PhySleep) */ ++ unsigned phy_in_sleep:1; ++ /** Deep Sleep*/ ++ unsigned deep_sleep:1; ++ unsigned resetaftsusp:1; ++ unsigned restoremode:1; ++ unsigned enbl_extnd_hiber:1; ++ unsigned extnd_hiber_pwrclmp:1; ++ unsigned extnd_hiber_switch:1; ++ unsigned ess_reg_restored:1; ++ unsigned prt_clk_sel:2; ++ unsigned port_power:1; ++ unsigned max_xcvrselect:2; ++ unsigned max_termsel:1; ++ unsigned mac_dev_addr:7; ++ unsigned p2hd_dev_enum_spd:2; ++ unsigned p2hd_prt_spd:2; ++ unsigned if_dev_mode:1; ++ } b; ++} pcgcctl_data_t; ++ ++/** ++ * This union represents the bit fields in the Global Data FIFO Software ++ * Configuration Register. Read the register into the <i>d32</i> member then ++ * set/clear the bits using the <i>b</i>it elements. ++ */ ++typedef union gdfifocfg_data { ++ /* raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** OTG Data FIFO depth */ ++ unsigned gdfifocfg:16; ++ /** Start address of EP info controller */ ++ unsigned epinfobase:16; ++ } b; ++} gdfifocfg_data_t; ++ ++/** ++ * This union represents the bit fields in the Global Power Down Register ++ * Register. Read the register into the <i>d32</i> member then set/clear the ++ * bits using the <i>b</i>it elements. ++ */ ++typedef union gpwrdn_data { ++ /* raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ /** PMU Interrupt Select */ ++ unsigned pmuintsel:1; ++ /** PMU Active */ ++ unsigned pmuactv:1; ++ /** Restore */ ++ unsigned restore:1; ++ /** Power Down Clamp */ ++ unsigned pwrdnclmp:1; ++ /** Power Down Reset */ ++ unsigned pwrdnrstn:1; ++ /** Power Down Switch */ ++ unsigned pwrdnswtch:1; ++ /** Disable VBUS */ ++ unsigned dis_vbus:1; ++ /** Line State Change */ ++ unsigned lnstschng:1; ++ /** Line state change mask */ ++ unsigned lnstchng_msk:1; ++ /** Reset Detected */ ++ unsigned rst_det:1; ++ /** Reset Detect mask */ ++ unsigned rst_det_msk:1; ++ /** Disconnect Detected */ ++ unsigned disconn_det:1; ++ /** Disconnect Detect mask */ ++ unsigned disconn_det_msk:1; ++ /** Connect Detected*/ ++ unsigned connect_det:1; ++ /** Connect Detected Mask*/ ++ unsigned connect_det_msk:1; ++ /** SRP Detected */ ++ unsigned srp_det:1; ++ /** SRP Detect mask */ ++ unsigned srp_det_msk:1; ++ /** Status Change Interrupt */ ++ unsigned sts_chngint:1; ++ /** Status Change Interrupt Mask */ ++ unsigned sts_chngint_msk:1; ++ /** Line State */ ++ unsigned linestate:2; ++ /** Indicates current mode(status of IDDIG signal) */ ++ unsigned idsts:1; ++ /** B Session Valid signal status*/ ++ unsigned bsessvld:1; ++ /** ADP Event Detected */ ++ unsigned adp_int:1; ++ /** Multi Valued ID pin */ ++ unsigned mult_val_id_bc:5; ++ /** Reserved 24_31 */ ++ unsigned reserved29_31:3; ++ } b; ++} gpwrdn_data_t; ++ ++#endif +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/test/Makefile +@@ -0,0 +1,16 @@ ++ ++PERL=/usr/bin/perl ++PL_TESTS=test_sysfs.pl test_mod_param.pl ++ ++.PHONY : test ++test : perl_tests ++ ++perl_tests : ++ @echo ++ @echo Running perl tests ++ @for test in $(PL_TESTS); do \ ++ if $(PERL) ./$$test ; then \ ++ echo "=======> $$test, PASSED" ; \ ++ else echo "=======> $$test, FAILED" ; \ ++ fi \ ++ done +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm +@@ -0,0 +1,337 @@ ++package dwc_otg_test; ++ ++use strict; ++use Exporter (); ++ ++use vars qw(@ISA @EXPORT ++$sysfsdir $paramdir $errors $params ++); ++ ++@ISA = qw(Exporter); ++ ++# ++# Globals ++# ++$sysfsdir = "/sys/devices/lm0"; ++$paramdir = "/sys/module/dwc_otg"; ++$errors = 0; ++ ++$params = [ ++ { ++ NAME => "otg_cap", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 2 ++ }, ++ { ++ NAME => "dma_enable", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ { ++ NAME => "dma_burst_size", ++ DEFAULT => 32, ++ ENUM => [1, 4, 8, 16, 32, 64, 128, 256], ++ LOW => 1, ++ HIGH => 256 ++ }, ++ { ++ NAME => "host_speed", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ { ++ NAME => "host_support_fs_ls_low_power", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ { ++ NAME => "host_ls_low_power_phy_clk", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ { ++ NAME => "dev_speed", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ { ++ NAME => "enable_dynamic_fifo", ++ DEFAULT => 1, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ { ++ NAME => "data_fifo_size", ++ DEFAULT => 8192, ++ ENUM => [], ++ LOW => 32, ++ HIGH => 32768 ++ }, ++ { ++ NAME => "dev_rx_fifo_size", ++ DEFAULT => 1064, ++ ENUM => [], ++ LOW => 16, ++ HIGH => 32768 ++ }, ++ { ++ NAME => "dev_nperio_tx_fifo_size", ++ DEFAULT => 1024, ++ ENUM => [], ++ LOW => 16, ++ HIGH => 32768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_1", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_2", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_3", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_4", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_5", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_6", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_7", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_8", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_9", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_10", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_11", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_12", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_13", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_14", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_15", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "host_rx_fifo_size", ++ DEFAULT => 1024, ++ ENUM => [], ++ LOW => 16, ++ HIGH => 32768 ++ }, ++ { ++ NAME => "host_nperio_tx_fifo_size", ++ DEFAULT => 1024, ++ ENUM => [], ++ LOW => 16, ++ HIGH => 32768 ++ }, ++ { ++ NAME => "host_perio_tx_fifo_size", ++ DEFAULT => 1024, ++ ENUM => [], ++ LOW => 16, ++ HIGH => 32768 ++ }, ++ { ++ NAME => "max_transfer_size", ++ DEFAULT => 65535, ++ ENUM => [], ++ LOW => 2047, ++ HIGH => 65535 ++ }, ++ { ++ NAME => "max_packet_count", ++ DEFAULT => 511, ++ ENUM => [], ++ LOW => 15, ++ HIGH => 511 ++ }, ++ { ++ NAME => "host_channels", ++ DEFAULT => 12, ++ ENUM => [], ++ LOW => 1, ++ HIGH => 16 ++ }, ++ { ++ NAME => "dev_endpoints", ++ DEFAULT => 6, ++ ENUM => [], ++ LOW => 1, ++ HIGH => 15 ++ }, ++ { ++ NAME => "phy_type", ++ DEFAULT => 1, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 2 ++ }, ++ { ++ NAME => "phy_utmi_width", ++ DEFAULT => 16, ++ ENUM => [8, 16], ++ LOW => 8, ++ HIGH => 16 ++ }, ++ { ++ NAME => "phy_ulpi_ddr", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ ]; ++ ++ ++# ++# ++sub check_arch { ++ $_ = `uname -m`; ++ chomp; ++ unless (m/armv4tl/) { ++ warn "# \n# Can't execute on $_. Run on integrator platform.\n# \n"; ++ return 0; ++ } ++ return 1; ++} ++ ++# ++# ++sub load_module { ++ my $params = shift; ++ print "\nRemoving Module\n"; ++ system "rmmod dwc_otg"; ++ print "Loading Module\n"; ++ if ($params ne "") { ++ print "Module Parameters: $params\n"; ++ } ++ if (system("modprobe dwc_otg $params")) { ++ warn "Unable to load module\n"; ++ return 0; ++ } ++ return 1; ++} ++ ++# ++# ++sub test_status { ++ my $arg = shift; ++ ++ print "\n"; ++ ++ if (defined $arg) { ++ warn "WARNING: $arg\n"; ++ } ++ ++ if ($errors > 0) { ++ warn "TEST FAILED with $errors errors\n"; ++ return 0; ++ } else { ++ print "TEST PASSED\n"; ++ return 0 if (defined $arg); ++ } ++ return 1; ++} ++ ++# ++# ++@EXPORT = qw( ++$sysfsdir ++$paramdir ++$params ++$errors ++check_arch ++load_module ++test_status ++); ++ ++1; +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/test/test_mod_param.pl +@@ -0,0 +1,133 @@ ++#!/usr/bin/perl -w ++# ++# Run this program on the integrator. ++# ++# - Tests module parameter default values. ++# - Tests setting of valid module parameter values via modprobe. ++# - Tests invalid module parameter values. ++# ----------------------------------------------------------------------------- ++use strict; ++use dwc_otg_test; ++ ++check_arch() or die; ++ ++# ++# ++sub test { ++ my ($param,$expected) = @_; ++ my $value = get($param); ++ ++ if ($value == $expected) { ++ print "$param = $value, okay\n"; ++ } ++ ++ else { ++ warn "ERROR: value of $param != $expected, $value\n"; ++ $errors ++; ++ } ++} ++ ++# ++# ++sub get { ++ my $param = shift; ++ my $tmp = `cat $paramdir/$param`; ++ chomp $tmp; ++ return $tmp; ++} ++ ++# ++# ++sub test_main { ++ ++ print "\nTesting Module Parameters\n"; ++ ++ load_module("") or die; ++ ++ # Test initial values ++ print "\nTesting Default Values\n"; ++ foreach (@{$params}) { ++ test ($_->{NAME}, $_->{DEFAULT}); ++ } ++ ++ # Test low value ++ print "\nTesting Low Value\n"; ++ my $cmd_params = ""; ++ foreach (@{$params}) { ++ $cmd_params = $cmd_params . "$_->{NAME}=$_->{LOW} "; ++ } ++ load_module($cmd_params) or die; ++ ++ foreach (@{$params}) { ++ test ($_->{NAME}, $_->{LOW}); ++ } ++ ++ # Test high value ++ print "\nTesting High Value\n"; ++ $cmd_params = ""; ++ foreach (@{$params}) { ++ $cmd_params = $cmd_params . "$_->{NAME}=$_->{HIGH} "; ++ } ++ load_module($cmd_params) or die; ++ ++ foreach (@{$params}) { ++ test ($_->{NAME}, $_->{HIGH}); ++ } ++ ++ # Test Enum ++ print "\nTesting Enumerated\n"; ++ foreach (@{$params}) { ++ if (defined $_->{ENUM}) { ++ my $value; ++ foreach $value (@{$_->{ENUM}}) { ++ $cmd_params = "$_->{NAME}=$value"; ++ load_module($cmd_params) or die; ++ test ($_->{NAME}, $value); ++ } ++ } ++ } ++ ++ # Test Invalid Values ++ print "\nTesting Invalid Values\n"; ++ $cmd_params = ""; ++ foreach (@{$params}) { ++ $cmd_params = $cmd_params . sprintf "$_->{NAME}=%d ", $_->{LOW}-1; ++ } ++ load_module($cmd_params) or die; ++ ++ foreach (@{$params}) { ++ test ($_->{NAME}, $_->{DEFAULT}); ++ } ++ ++ $cmd_params = ""; ++ foreach (@{$params}) { ++ $cmd_params = $cmd_params . sprintf "$_->{NAME}=%d ", $_->{HIGH}+1; ++ } ++ load_module($cmd_params) or die; ++ ++ foreach (@{$params}) { ++ test ($_->{NAME}, $_->{DEFAULT}); ++ } ++ ++ print "\nTesting Enumerated\n"; ++ foreach (@{$params}) { ++ if (defined $_->{ENUM}) { ++ my $value; ++ foreach $value (@{$_->{ENUM}}) { ++ $value = $value + 1; ++ $cmd_params = "$_->{NAME}=$value"; ++ load_module($cmd_params) or die; ++ test ($_->{NAME}, $_->{DEFAULT}); ++ $value = $value - 2; ++ $cmd_params = "$_->{NAME}=$value"; ++ load_module($cmd_params) or die; ++ test ($_->{NAME}, $_->{DEFAULT}); ++ } ++ } ++ } ++ ++ test_status() or die; ++} ++ ++test_main(); ++0; +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/test/test_sysfs.pl +@@ -0,0 +1,193 @@ ++#!/usr/bin/perl -w ++# ++# Run this program on the integrator ++# - Tests select sysfs attributes. ++# - Todo ... test more attributes, hnp/srp, buspower/bussuspend, etc. ++# ----------------------------------------------------------------------------- ++use strict; ++use dwc_otg_test; ++ ++check_arch() or die; ++ ++# ++# ++sub test { ++ my ($attr,$expected) = @_; ++ my $string = get($attr); ++ ++ if ($string eq $expected) { ++ printf("$attr = $string, okay\n"); ++ } ++ else { ++ warn "ERROR: value of $attr != $expected, $string\n"; ++ $errors ++; ++ } ++} ++ ++# ++# ++sub set { ++ my ($reg, $value) = @_; ++ system "echo $value > $sysfsdir/$reg"; ++} ++ ++# ++# ++sub get { ++ my $attr = shift; ++ my $string = `cat $sysfsdir/$attr`; ++ chomp $string; ++ if ($string =~ m/\s\=\s/) { ++ my $tmp; ++ ($tmp, $string) = split /\s=\s/, $string; ++ } ++ return $string; ++} ++ ++# ++# ++sub test_main { ++ print("\nTesting Sysfs Attributes\n"); ++ ++ load_module("") or die; ++ ++ # Test initial values of regoffset/regvalue/guid/gsnpsid ++ print("\nTesting Default Values\n"); ++ ++ test("regoffset", "0xffffffff"); ++ test("regvalue", "invalid offset"); ++ test("guid", "0x12345678"); # this will fail if it has been changed ++ test("gsnpsid", "0x4f54200a"); ++ ++ # Test operation of regoffset/regvalue ++ print("\nTesting regoffset\n"); ++ set('regoffset', '5a5a5a5a'); ++ test("regoffset", "0xffffffff"); ++ ++ set('regoffset', '0'); ++ test("regoffset", "0x00000000"); ++ ++ set('regoffset', '40000'); ++ test("regoffset", "0x00000000"); ++ ++ set('regoffset', '3ffff'); ++ test("regoffset", "0x0003ffff"); ++ ++ set('regoffset', '1'); ++ test("regoffset", "0x00000001"); ++ ++ print("\nTesting regvalue\n"); ++ set('regoffset', '3c'); ++ test("regvalue", "0x12345678"); ++ set('regvalue', '5a5a5a5a'); ++ test("regvalue", "0x5a5a5a5a"); ++ set('regvalue','a5a5a5a5'); ++ test("regvalue", "0xa5a5a5a5"); ++ set('guid','12345678'); ++ ++ # Test HNP Capable ++ print("\nTesting HNP Capable bit\n"); ++ set('hnpcapable', '1'); ++ test("hnpcapable", "0x1"); ++ set('hnpcapable','0'); ++ test("hnpcapable", "0x0"); ++ ++ set('regoffset','0c'); ++ ++ my $old = get('gusbcfg'); ++ print("setting hnpcapable\n"); ++ set('hnpcapable', '1'); ++ test("hnpcapable", "0x1"); ++ test('gusbcfg', sprintf "0x%08x", (oct ($old) | (1<<9))); ++ test('regvalue', sprintf "0x%08x", (oct ($old) | (1<<9))); ++ ++ $old = get('gusbcfg'); ++ print("clearing hnpcapable\n"); ++ set('hnpcapable', '0'); ++ test("hnpcapable", "0x0"); ++ test ('gusbcfg', sprintf "0x%08x", oct ($old) & (~(1<<9))); ++ test ('regvalue', sprintf "0x%08x", oct ($old) & (~(1<<9))); ++ ++ # Test SRP Capable ++ print("\nTesting SRP Capable bit\n"); ++ set('srpcapable', '1'); ++ test("srpcapable", "0x1"); ++ set('srpcapable','0'); ++ test("srpcapable", "0x0"); ++ ++ set('regoffset','0c'); ++ ++ $old = get('gusbcfg'); ++ print("setting srpcapable\n"); ++ set('srpcapable', '1'); ++ test("srpcapable", "0x1"); ++ test('gusbcfg', sprintf "0x%08x", (oct ($old) | (1<<8))); ++ test('regvalue', sprintf "0x%08x", (oct ($old) | (1<<8))); ++ ++ $old = get('gusbcfg'); ++ print("clearing srpcapable\n"); ++ set('srpcapable', '0'); ++ test("srpcapable", "0x0"); ++ test('gusbcfg', sprintf "0x%08x", oct ($old) & (~(1<<8))); ++ test('regvalue', sprintf "0x%08x", oct ($old) & (~(1<<8))); ++ ++ # Test GGPIO ++ print("\nTesting GGPIO\n"); ++ set('ggpio','5a5a5a5a'); ++ test('ggpio','0x5a5a0000'); ++ set('ggpio','a5a5a5a5'); ++ test('ggpio','0xa5a50000'); ++ set('ggpio','11110000'); ++ test('ggpio','0x11110000'); ++ set('ggpio','00001111'); ++ test('ggpio','0x00000000'); ++ ++ # Test DEVSPEED ++ print("\nTesting DEVSPEED\n"); ++ set('regoffset','800'); ++ $old = get('regvalue'); ++ set('devspeed','0'); ++ test('devspeed','0x0'); ++ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3))); ++ set('devspeed','1'); ++ test('devspeed','0x1'); ++ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 1)); ++ set('devspeed','2'); ++ test('devspeed','0x2'); ++ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 2)); ++ set('devspeed','3'); ++ test('devspeed','0x3'); ++ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 3)); ++ set('devspeed','4'); ++ test('devspeed','0x0'); ++ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3))); ++ set('devspeed','5'); ++ test('devspeed','0x1'); ++ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 1)); ++ ++ ++ # mode Returns the current mode:0 for device mode1 for host mode Read ++ # hnp Initiate the Host Negotiation Protocol. Read returns the status. Read/Write ++ # srp Initiate the Session Request Protocol. Read returns the status. Read/Write ++ # buspower Get or Set the Power State of the bus (0 - Off or 1 - On) Read/Write ++ # bussuspend Suspend the USB bus. Read/Write ++ # busconnected Get the connection status of the bus Read ++ ++ # gotgctl Get or set the Core Control Status Register. Read/Write ++ ## gusbcfg Get or set the Core USB Configuration Register Read/Write ++ # grxfsiz Get or set the Receive FIFO Size Register Read/Write ++ # gnptxfsiz Get or set the non-periodic Transmit Size Register Read/Write ++ # gpvndctl Get or set the PHY Vendor Control Register Read/Write ++ ## ggpio Get the value in the lower 16-bits of the General Purpose IO Register or Set the upper 16 bits. Read/Write ++ ## guid Get or set the value of the User ID Register Read/Write ++ ## gsnpsid Get the value of the Synopsys ID Regester Read ++ ## devspeed Get or set the device speed setting in the DCFG register Read/Write ++ # enumspeed Gets the device enumeration Speed. Read ++ # hptxfsiz Get the value of the Host Periodic Transmit FIFO Read ++ # hprt0 Get or Set the value in the Host Port Control and Status Register Read/Write ++ ++ test_status("TEST NYI") or die; ++} ++ ++test_main(); ++0; |