diff options
Diffstat (limited to 'target/linux/brcm-2.4/patches')
| -rw-r--r-- | target/linux/brcm-2.4/patches/001-bcm47xx.patch | 16208 | ||||
| -rw-r--r-- | target/linux/brcm-2.4/patches/004-flash.patch | 854 | ||||
| -rw-r--r-- | target/linux/brcm-2.4/patches/009-wrt54g3g_pcmcia.patch | 34 |
3 files changed, 0 insertions, 17096 deletions
diff --git a/target/linux/brcm-2.4/patches/001-bcm47xx.patch b/target/linux/brcm-2.4/patches/001-bcm47xx.patch index 9c954fa920..96d340b260 100644 --- a/target/linux/brcm-2.4/patches/001-bcm47xx.patch +++ b/target/linux/brcm-2.4/patches/001-bcm47xx.patch @@ -1,15862 +1,3 @@ -diff -urN linux.old/arch/mips/bcm947xx/bcmsrom.c linux.dev/arch/mips/bcm947xx/bcmsrom.c ---- linux.old/arch/mips/bcm947xx/bcmsrom.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/bcmsrom.c 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,1213 @@ -+/* -+ * Misc useful routines to access NIC SROM/OTP . -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id: bcmsrom.c,v 1.1.1.14 2006/04/15 01:28:25 michael Exp $ -+ */ -+ -+#include <typedefs.h> -+#include <bcmdefs.h> -+#include <osl.h> -+#include <bcmutils.h> -+#include <bcmsrom.h> -+#include <bcmdevs.h> -+#include <bcmendian.h> -+#include <sbpcmcia.h> -+#include <pcicfg.h> -+#include <sbutils.h> -+#include <bcmnvram.h> -+ -+/* debug/trace */ -+#if defined(WLTEST) -+#define BS_ERROR(args) printf args -+#else -+#define BS_ERROR(args) -+#endif /* BCMDBG_ERR || WLTEST */ -+ -+#define VARS_MAX 4096 /* should be reduced */ -+ -+#define WRITE_ENABLE_DELAY 500 /* 500 ms after write enable/disable toggle */ -+#define WRITE_WORD_DELAY 20 /* 20 ms between each word write */ -+ -+static int initvars_srom_pci(void *sbh, void *curmap, char **vars, uint *count); -+static int initvars_cis_pcmcia(void *sbh, osl_t *osh, char **vars, uint *count); -+static int initvars_flash_sb(void *sbh, char **vars, uint *count); -+static int srom_parsecis(osl_t *osh, uint8 **pcis, uint ciscnt, char **vars, uint *count); -+static int sprom_cmd_pcmcia(osl_t *osh, uint8 cmd); -+static int sprom_read_pcmcia(osl_t *osh, uint16 addr, uint16 *data); -+static int sprom_write_pcmcia(osl_t *osh, uint16 addr, uint16 data); -+static int sprom_read_pci(osl_t *osh, uint16 *sprom, uint wordoff, uint16 *buf, uint nwords, -+ bool check_crc); -+ -+static int initvars_table(osl_t *osh, char *start, char *end, char **vars, uint *count); -+static int initvars_flash(osl_t *osh, char **vp, uint len, char *devpath); -+ -+/* -+ * Initialize local vars from the right source for this platform. -+ * Return 0 on success, nonzero on error. -+ */ -+int -+srom_var_init(void *sbh, uint bustype, void *curmap, osl_t *osh, char **vars, uint *count) -+{ -+ ASSERT(bustype == BUSTYPE(bustype)); -+ if (vars == NULL || count == NULL) -+ return (0); -+ -+ switch (BUSTYPE(bustype)) { -+ case SB_BUS: -+ case JTAG_BUS: -+ return initvars_flash_sb(sbh, vars, count); -+ -+ case PCI_BUS: -+ ASSERT(curmap); /* can not be NULL */ -+ return initvars_srom_pci(sbh, curmap, vars, count); -+ -+ case PCMCIA_BUS: -+ return initvars_cis_pcmcia(sbh, osh, vars, count); -+ -+ -+ default: -+ ASSERT(0); -+ } -+ return (-1); -+} -+ -+/* support only 16-bit word read from srom */ -+int -+srom_read(uint bustype, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf) -+{ -+ void *srom; -+ uint i, off, nw; -+ -+ ASSERT(bustype == BUSTYPE(bustype)); -+ -+ /* check input - 16-bit access only */ -+ if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2)) -+ return 1; -+ -+ off = byteoff / 2; -+ nw = nbytes / 2; -+ -+ if (BUSTYPE(bustype) == PCI_BUS) { -+ if (!curmap) -+ return 1; -+ srom = (uchar*)curmap + PCI_BAR0_SPROM_OFFSET; -+ if (sprom_read_pci(osh, srom, off, buf, nw, FALSE)) -+ return 1; -+ } else if (BUSTYPE(bustype) == PCMCIA_BUS) { -+ for (i = 0; i < nw; i++) { -+ if (sprom_read_pcmcia(osh, (uint16)(off + i), (uint16*)(buf + i))) -+ return 1; -+ } -+ } else { -+ return 1; -+ } -+ -+ return 0; -+} -+ -+/* support only 16-bit word write into srom */ -+int -+srom_write(uint bustype, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf) -+{ -+ uint16 *srom; -+ uint i, nw, crc_range; -+ uint16 image[SPROM_SIZE]; -+ uint8 crc; -+ volatile uint32 val32; -+ -+ ASSERT(bustype == BUSTYPE(bustype)); -+ -+ /* check input - 16-bit access only */ -+ if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2)) -+ return 1; -+ -+ /* Are we writing the whole thing at once? */ -+ if ((byteoff == 0) && -+ ((nbytes == SPROM_SIZE) || -+ (nbytes == (SPROM_CRC_RANGE * 2)) || -+ (nbytes == (SROM4_WORDS * 2)))) { -+ crc_range = nbytes; -+ bcopy((void*)buf, (void*)image, nbytes); -+ nw = nbytes / 2; -+ } else { -+ if ((BUSTYPE(bustype) == PCMCIA_BUS) || (BUSTYPE(bustype) == SDIO_BUS)) -+ crc_range = SPROM_SIZE; -+ else -+ crc_range = SPROM_CRC_RANGE * 2; /* Tentative */ -+ -+ nw = crc_range / 2; -+ /* read first 64 words from srom */ -+ if (srom_read(bustype, curmap, osh, 0, crc_range, image)) -+ return 1; -+ if (image[SROM4_SIGN] == SROM4_SIGNATURE) { -+ crc_range = SROM4_WORDS; -+ nw = crc_range / 2; -+ if (srom_read(bustype, curmap, osh, 0, crc_range, image)) -+ return 1; -+ } -+ /* make changes */ -+ bcopy((void*)buf, (void*)&image[byteoff / 2], nbytes); -+ } -+ -+ /* calculate crc */ -+ htol16_buf(image, crc_range); -+ crc = ~hndcrc8((uint8 *)image, crc_range - 1, CRC8_INIT_VALUE); -+ ltoh16_buf(image, crc_range); -+ image[(crc_range / 2) - 1] = (crc << 8) | (image[(crc_range / 2) - 1] & 0xff); -+ -+ if (BUSTYPE(bustype) == PCI_BUS) { -+ srom = (uint16*)((uchar*)curmap + PCI_BAR0_SPROM_OFFSET); -+ /* enable writes to the SPROM */ -+ val32 = OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32)); -+ val32 |= SPROM_WRITEEN; -+ OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32); -+ bcm_mdelay(WRITE_ENABLE_DELAY); -+ /* write srom */ -+ for (i = 0; i < nw; i++) { -+ W_REG(osh, &srom[i], image[i]); -+ bcm_mdelay(WRITE_WORD_DELAY); -+ } -+ /* disable writes to the SPROM */ -+ OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32 & -+ ~SPROM_WRITEEN); -+ } else if (BUSTYPE(bustype) == PCMCIA_BUS) { -+ /* enable writes to the SPROM */ -+ if (sprom_cmd_pcmcia(osh, SROM_WEN)) -+ return 1; -+ bcm_mdelay(WRITE_ENABLE_DELAY); -+ /* write srom */ -+ for (i = 0; i < nw; i++) { -+ sprom_write_pcmcia(osh, (uint16)(i), image[i]); -+ bcm_mdelay(WRITE_WORD_DELAY); -+ } -+ /* disable writes to the SPROM */ -+ if (sprom_cmd_pcmcia(osh, SROM_WDS)) -+ return 1; -+ } else { -+ return 1; -+ } -+ -+ bcm_mdelay(WRITE_ENABLE_DELAY); -+ return 0; -+} -+ -+ -+static int -+srom_parsecis(osl_t *osh, uint8 **pcis, uint ciscnt, char **vars, uint *count) -+{ -+ char eabuf[32]; -+ char *vp, *base; -+ uint8 *cis, tup, tlen, sromrev = 1; -+ int i, j; -+ uint varsize; -+ bool ag_init = FALSE; -+ uint32 w32; -+ -+ ASSERT(vars); -+ ASSERT(count); -+ -+ base = vp = MALLOC(osh, VARS_MAX); -+ ASSERT(vp); -+ if (!vp) -+ return -2; -+ -+ while (ciscnt--) { -+ cis = *pcis++; -+ i = 0; -+ do { -+ tup = cis[i++]; -+ tlen = cis[i++]; -+ if ((i + tlen) >= CIS_SIZE) -+ break; -+ -+ switch (tup) { -+ case CISTPL_MANFID: -+ vp += sprintf(vp, "manfid=%d", (cis[i + 1] << 8) + cis[i]); -+ vp++; -+ vp += sprintf(vp, "prodid=%d", (cis[i + 3] << 8) + cis[i + 2]); -+ vp++; -+ break; -+ -+ case CISTPL_FUNCE: -+ switch (cis[i]) { -+ case LAN_NID: -+ ASSERT(cis[i + 1] == 6); -+ bcm_ether_ntoa((struct ether_addr *)&cis[i + 2], eabuf); -+ vp += sprintf(vp, "il0macaddr=%s", eabuf); -+ vp++; -+ break; -+ case 1: /* SDIO Extended Data */ -+ vp += sprintf(vp, "sdmaxblk=%d", -+ (cis[i + 13] << 8) | cis[i + 12]); -+ vp++; -+ break; -+ } -+ break; -+ -+ case CISTPL_CFTABLE: -+ vp += sprintf(vp, "regwindowsz=%d", (cis[i + 7] << 8) | cis[i + 6]); -+ vp++; -+ break; -+ -+ case CISTPL_BRCM_HNBU: -+ switch (cis[i]) { -+ case HNBU_SROMREV: -+ sromrev = cis[i + 1]; -+ break; -+ -+ case HNBU_CHIPID: -+ vp += sprintf(vp, "vendid=%d", (cis[i + 2] << 8) + -+ cis[i + 1]); -+ vp++; -+ vp += sprintf(vp, "devid=%d", (cis[i + 4] << 8) + -+ cis[i + 3]); -+ vp++; -+ if (tlen == 7) { -+ vp += sprintf(vp, "chiprev=%d", -+ (cis[i + 6] << 8) + cis[i + 5]); -+ vp++; -+ } -+ break; -+ -+ case HNBU_BOARDREV: -+ vp += sprintf(vp, "boardrev=%d", cis[i + 1]); -+ vp++; -+ break; -+ -+ case HNBU_AA: -+ vp += sprintf(vp, "aa2g=%d", cis[i + 1]); -+ vp++; -+ break; -+ -+ case HNBU_AG: -+ vp += sprintf(vp, "ag0=%d", cis[i + 1]); -+ vp++; -+ ag_init = TRUE; -+ break; -+ -+ case HNBU_CC: -+ ASSERT(sromrev == 1); -+ vp += sprintf(vp, "cc=%d", cis[i + 1]); -+ vp++; -+ break; -+ -+ case HNBU_PAPARMS: -+ if (tlen == 2) { -+ ASSERT(sromrev == 1); -+ vp += sprintf(vp, "pa0maxpwr=%d", cis[i + 1]); -+ vp++; -+ } else if (tlen >= 9) { -+ if (tlen == 10) { -+ ASSERT(sromrev == 2); -+ vp += sprintf(vp, "opo=%d", cis[i + 9]); -+ vp++; -+ } else -+ ASSERT(tlen == 9); -+ -+ for (j = 0; j < 3; j++) { -+ vp += sprintf(vp, "pa0b%d=%d", j, -+ (cis[i + (j * 2) + 2] << 8) + -+ cis[i + (j * 2) + 1]); -+ vp++; -+ } -+ vp += sprintf(vp, "pa0itssit=%d", cis[i + 7]); -+ vp++; -+ vp += sprintf(vp, "pa0maxpwr=%d", cis[i + 8]); -+ vp++; -+ } else -+ ASSERT(tlen >= 9); -+ break; -+ -+ case HNBU_OEM: -+ ASSERT(sromrev == 1); -+ vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x", -+ cis[i + 1], cis[i + 2], -+ cis[i + 3], cis[i + 4], -+ cis[i + 5], cis[i + 6], -+ cis[i + 7], cis[i + 8]); -+ vp++; -+ break; -+ -+ case HNBU_BOARDFLAGS: -+ w32 = (cis[i + 2] << 8) + cis[i + 1]; -+ if (tlen == 5) -+ w32 |= (cis[i + 4] << 24) + (cis[i + 3] << 16); -+ vp += sprintf(vp, "boardflags=0x%x", w32); -+ vp++; -+ break; -+ -+ case HNBU_LEDS: -+ if (cis[i + 1] != 0xff) { -+ vp += sprintf(vp, "ledbh0=%d", cis[i + 1]); -+ vp++; -+ } -+ if (cis[i + 2] != 0xff) { -+ vp += sprintf(vp, "ledbh1=%d", cis[i + 2]); -+ vp++; -+ } -+ if (cis[i + 3] != 0xff) { -+ vp += sprintf(vp, "ledbh2=%d", cis[i + 3]); -+ vp++; -+ } -+ if (cis[i + 4] != 0xff) { -+ vp += sprintf(vp, "ledbh3=%d", cis[i + 4]); -+ vp++; -+ } -+ break; -+ -+ case HNBU_CCODE: -+ { -+ char str[3]; -+ ASSERT(sromrev > 1); -+ str[0] = cis[i + 1]; -+ str[1] = cis[i + 2]; -+ str[2] = 0; -+ vp += sprintf(vp, "ccode=%s", str); -+ vp++; -+ vp += sprintf(vp, "cctl=0x%x", cis[i + 3]); -+ vp++; -+ break; -+ } -+ -+ case HNBU_CCKPO: -+ ASSERT(sromrev > 2); -+ vp += sprintf(vp, "cckpo=0x%x", -+ (cis[i + 2] << 8) | cis[i + 1]); -+ vp++; -+ break; -+ -+ case HNBU_OFDMPO: -+ ASSERT(sromrev > 2); -+ vp += sprintf(vp, "ofdmpo=0x%x", -+ (cis[i + 4] << 24) | -+ (cis[i + 3] << 16) | -+ (cis[i + 2] << 8) | -+ cis[i + 1]); -+ vp++; -+ break; -+ } -+ break; -+ -+ } -+ i += tlen; -+ } while (tup != 0xff); -+ } -+ -+ /* Set the srom version */ -+ vp += sprintf(vp, "sromrev=%d", sromrev); -+ vp++; -+ -+ /* if there is no antenna gain field, set default */ -+ if (ag_init == FALSE) { -+ ASSERT(sromrev == 1); -+ vp += sprintf(vp, "ag0=%d", 0xff); -+ vp++; -+ } -+ -+ /* final nullbyte terminator */ -+ *vp++ = '\0'; -+ varsize = (uint)(vp - base); -+ -+ ASSERT((vp - base) < VARS_MAX); -+ -+ if (varsize == VARS_MAX) { -+ *vars = base; -+ } else { -+ vp = MALLOC(osh, varsize); -+ ASSERT(vp); -+ if (vp) -+ bcopy(base, vp, varsize); -+ MFREE(osh, base, VARS_MAX); -+ *vars = vp; -+ if (!vp) { -+ *count = 0; -+ return -2; -+ } -+ } -+ *count = varsize; -+ -+ return (0); -+} -+ -+ -+/* set PCMCIA sprom command register */ -+static int -+sprom_cmd_pcmcia(osl_t *osh, uint8 cmd) -+{ -+ uint8 status = 0; -+ uint wait_cnt = 1000; -+ -+ /* write sprom command register */ -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_CS, &cmd, 1); -+ -+ /* wait status */ -+ while (wait_cnt--) { -+ OSL_PCMCIA_READ_ATTR(osh, SROM_CS, &status, 1); -+ if (status & SROM_DONE) -+ return 0; -+ } -+ -+ return 1; -+} -+ -+/* read a word from the PCMCIA srom */ -+static int -+sprom_read_pcmcia(osl_t *osh, uint16 addr, uint16 *data) -+{ -+ uint8 addr_l, addr_h, data_l, data_h; -+ -+ addr_l = (uint8)((addr * 2) & 0xff); -+ addr_h = (uint8)(((addr * 2) >> 8) & 0xff); -+ -+ /* set address */ -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1); -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1); -+ -+ /* do read */ -+ if (sprom_cmd_pcmcia(osh, SROM_READ)) -+ return 1; -+ -+ /* read data */ -+ data_h = data_l = 0; -+ OSL_PCMCIA_READ_ATTR(osh, SROM_DATAH, &data_h, 1); -+ OSL_PCMCIA_READ_ATTR(osh, SROM_DATAL, &data_l, 1); -+ -+ *data = (data_h << 8) | data_l; -+ return 0; -+} -+ -+/* write a word to the PCMCIA srom */ -+static int -+sprom_write_pcmcia(osl_t *osh, uint16 addr, uint16 data) -+{ -+ uint8 addr_l, addr_h, data_l, data_h; -+ -+ addr_l = (uint8)((addr * 2) & 0xff); -+ addr_h = (uint8)(((addr * 2) >> 8) & 0xff); -+ data_l = (uint8)(data & 0xff); -+ data_h = (uint8)((data >> 8) & 0xff); -+ -+ /* set address */ -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1); -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1); -+ -+ /* write data */ -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAH, &data_h, 1); -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAL, &data_l, 1); -+ -+ /* do write */ -+ return sprom_cmd_pcmcia(osh, SROM_WRITE); -+} -+ -+/* -+ * Read in and validate sprom. -+ * Return 0 on success, nonzero on error. -+ */ -+static int -+sprom_read_pci(osl_t *osh, uint16 *sprom, uint wordoff, uint16 *buf, uint nwords, bool check_crc) -+{ -+ int err = 0; -+ uint i; -+ -+ /* read the sprom */ -+ for (i = 0; i < nwords; i++) -+ buf[i] = R_REG(osh, &sprom[wordoff + i]); -+ -+ if (check_crc) { -+ /* fixup the endianness so crc8 will pass */ -+ htol16_buf(buf, nwords * 2); -+ if (hndcrc8((uint8*)buf, nwords * 2, CRC8_INIT_VALUE) != CRC8_GOOD_VALUE) -+ err = 1; -+ /* now correct the endianness of the byte array */ -+ ltoh16_buf(buf, nwords * 2); -+ } -+ -+ return err; -+} -+ -+/* -+* Create variable table from memory. -+* Return 0 on success, nonzero on error. -+*/ -+static int -+initvars_table(osl_t *osh, char *start, char *end, char **vars, uint *count) -+{ -+ int c = (int)(end - start); -+ -+ /* do it only when there is more than just the null string */ -+ if (c > 1) { -+ char *vp = MALLOC(osh, c); -+ ASSERT(vp); -+ if (!vp) -+ return BCME_NOMEM; -+ bcopy(start, vp, c); -+ *vars = vp; -+ *count = c; -+ } -+ else { -+ *vars = NULL; -+ *count = 0; -+ } -+ -+ return 0; -+} -+ -+/* -+ * Find variables with <devpath> from flash. 'base' points to the beginning -+ * of the table upon enter and to the end of the table upon exit when success. -+ * Return 0 on success, nonzero on error. -+ */ -+static int -+initvars_flash(osl_t *osh, char **base, uint len, char *devpath) -+{ -+ char *vp = *base; -+ char *flash; -+ int err; -+ char *s; -+ uint l, dl, copy_len; -+ -+ /* allocate memory and read in flash */ -+ if (!(flash = MALLOC(osh, NVRAM_SPACE))) -+ return BCME_NOMEM; -+ if ((err = nvram_getall(flash, NVRAM_SPACE))) -+ goto exit; -+ -+ /* grab vars with the <devpath> prefix in name */ -+ dl = strlen(devpath); -+ for (s = flash; s && *s; s += l + 1) { -+ l = strlen(s); -+ -+ /* skip non-matching variable */ -+ if (strncmp(s, devpath, dl)) -+ continue; -+ -+ /* is there enough room to copy? */ -+ copy_len = l - dl + 1; -+ if (len < copy_len) { -+ err = BCME_BUFTOOSHORT; -+ goto exit; -+ } -+ -+ /* no prefix, just the name=value */ -+ strcpy(vp, &s[dl]); -+ vp += copy_len; -+ len -= copy_len; -+ } -+ -+ /* add null string as terminator */ -+ if (len < 1) { -+ err = BCME_BUFTOOSHORT; -+ goto exit; -+ } -+ *vp++ = '\0'; -+ -+ *base = vp; -+ -+exit: MFREE(osh, flash, NVRAM_SPACE); -+ return err; -+} -+ -+/* -+ * Initialize nonvolatile variable table from flash. -+ * Return 0 on success, nonzero on error. -+ */ -+static int -+initvars_flash_sb(void *sbh, char **vars, uint *count) -+{ -+ osl_t *osh = sb_osh(sbh); -+ char devpath[SB_DEVPATH_BUFSZ]; -+ char *vp, *base; -+ int err; -+ -+ ASSERT(vars); -+ ASSERT(count); -+ -+ if ((err = sb_devpath(sbh, devpath, sizeof(devpath)))) -+ return err; -+ -+ base = vp = MALLOC(osh, VARS_MAX); -+ ASSERT(vp); -+ if (!vp) -+ return BCME_NOMEM; -+ -+ if ((err = initvars_flash(osh, &vp, VARS_MAX, devpath))) -+ goto err; -+ -+ err = initvars_table(osh, base, vp, vars, count); -+ -+err: MFREE(osh, base, VARS_MAX); -+ return err; -+} -+ -+#ifdef WLTEST -+char mfgsromvars[256]; -+char *defaultsromvars = "il0macaddr=00:11:22:33:44:51\0" -+ "et0macaddr=00:11:22:33:44:52\0" -+ "et1macaddr=00:11:22:33:44:53\0" -+ "boardtype=0xffff\0" -+ "boardrev=0x10\0" -+ "boardflags=8\0" -+ "sromrev=2\0" -+ "aa2g=3"; -+#define MFGSROM_DEFVARSLEN 147 /* default srom len */ -+#endif /* WL_TEST */ -+ -+/* -+ * Initialize nonvolatile variable table from sprom. -+ * Return 0 on success, nonzero on error. -+ */ -+static int -+initvars_srom_pci(void *sbh, void *curmap, char **vars, uint *count) -+{ -+ uint16 w, *b; -+ uint8 sromrev = 0; -+ struct ether_addr ea; -+ char eabuf[32]; -+ uint32 w32; -+ int woff, i; -+ char *vp, *base; -+ osl_t *osh = sb_osh(sbh); -+ bool flash = FALSE; -+ char name[SB_DEVPATH_BUFSZ+16], *value; -+ char devpath[SB_DEVPATH_BUFSZ]; -+ int err; -+ -+ /* -+ * Apply CRC over SROM content regardless SROM is present or not, -+ * and use variable <devpath>sromrev's existance in flash to decide -+ * if we should return an error when CRC fails or read SROM variables -+ * from flash. -+ */ -+ b = MALLOC(osh, SROM_MAX); -+ ASSERT(b); -+ if (!b) -+ return -2; -+ -+ err = sprom_read_pci(osh, (void*)((int8*)curmap + PCI_BAR0_SPROM_OFFSET), 0, b, -+ 64, TRUE); -+ if (b[SROM4_SIGN] == SROM4_SIGNATURE) { -+ /* sromrev >= 4, read more */ -+ err = sprom_read_pci(osh, (void*)((int8*)curmap + PCI_BAR0_SPROM_OFFSET), 0, b, SROM4_WORDS, TRUE); -+ sromrev = b[SROM4_WORDS - 1] & 0xff; -+ } else if (err == 0) { -+ /* srom is good and is rev < 4 */ -+ /* top word of sprom contains version and crc8 */ -+ sromrev = b[63] & 0xff; -+ /* bcm4401 sroms misprogrammed */ -+ if (sromrev == 0x10) -+ sromrev = 1; -+ } -+ -+ if (err) { -+#ifdef WLTEST -+ BS_ERROR(("SROM Crc Error, so see if we could use a default\n")); -+ w32 = OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32)); -+ if (w32 & SPROM_OTPIN_USE) { -+ BS_ERROR(("srom crc failed with OTP, use default vars....\n")); -+ vp = base = mfgsromvars; -+ if (sb_chip(sbh) == BCM4311_CHIP_ID) { -+ BS_ERROR(("setting the devid to be 4311\n")); -+ vp += sprintf(vp, "devid=0x4311"); -+ vp++; -+ } -+ bcopy(defaultsromvars, vp, MFGSROM_DEFVARSLEN); -+ vp += MFGSROM_DEFVARSLEN; -+ goto varsdone; -+ } else { -+ BS_ERROR(("srom crc failed with SPROM....\n")); -+#endif /* WLTEST */ -+ if ((err = sb_devpath(sbh, devpath, sizeof(devpath)))) -+ return err; -+ sprintf(name, "%ssromrev", devpath); -+ if (!(value = getvar(NULL, name))) -+ return (-1); -+ sromrev = (uint8)bcm_strtoul(value, NULL, 0); -+ flash = TRUE; -+#ifdef WLTEST -+ } -+#endif /* WLTEST */ -+ } -+ -+ /* srom version check */ -+ if (sromrev > 4) -+ return (-2); -+ -+ ASSERT(vars); -+ ASSERT(count); -+ -+ base = vp = MALLOC(osh, VARS_MAX); -+ ASSERT(vp); -+ if (!vp) -+ return -2; -+ -+ /* read variables from flash */ -+ if (flash) { -+ if ((err = initvars_flash(osh, &vp, VARS_MAX, devpath))) -+ goto err; -+ goto varsdone; -+ } -+ -+ vp += sprintf(vp, "sromrev=%d", sromrev); -+ vp++; -+ -+ if (sromrev >= 4) { -+ uint path, pathbase; -+ const uint pathbases[MAX_PATH] = {SROM4_PATH0, SROM4_PATH1, -+ SROM4_PATH2, SROM4_PATH3}; -+ -+ vp += sprintf(vp, "boardrev=%d", b[SROM4_BREV]); -+ vp++; -+ -+ vp += sprintf(vp, "boardflags=%d", (b[SROM4_BFL1] << 16) | b[SROM4_BFL0]); -+ vp++; -+ -+ vp += sprintf(vp, "boardflags2=%d", (b[SROM4_BFL3] << 16) | b[SROM4_BFL2]); -+ vp++; -+ -+ /* The macaddr */ -+ ea.octet[0] = (b[SROM4_MACHI] >> 8) & 0xff; -+ ea.octet[1] = b[SROM4_MACHI] & 0xff; -+ ea.octet[2] = (b[SROM4_MACMID] >> 8) & 0xff; -+ ea.octet[3] = b[SROM4_MACMID] & 0xff; -+ ea.octet[4] = (b[SROM4_MACLO] >> 8) & 0xff; -+ ea.octet[5] = b[SROM4_MACLO] & 0xff; -+ bcm_ether_ntoa(&ea, eabuf); -+ vp += sprintf(vp, "macaddr=%s", eabuf); -+ vp++; -+ -+ w = b[SROM4_CCODE]; -+ if (w == 0) -+ vp += sprintf(vp, "ccode="); -+ else -+ vp += sprintf(vp, "ccode=%c%c", (w >> 8), (w & 0xff)); -+ vp++; -+ vp += sprintf(vp, "regrev=%d", b[SROM4_REGREV]); -+ vp++; -+ -+ w = b[SROM4_LEDBH10]; -+ if ((w != 0) && (w != 0xffff)) { -+ /* ledbh0 */ -+ vp += sprintf(vp, "ledbh0=%d", (w & 0xff)); -+ vp++; -+ -+ /* ledbh1 */ -+ vp += sprintf(vp, "ledbh1=%d", (w >> 8) & 0xff); -+ vp++; -+ } -+ w = b[SROM4_LEDBH32]; -+ if ((w != 0) && (w != 0xffff)) { -+ /* ledbh2 */ -+ vp += sprintf(vp, "ledbh2=%d", w & 0xff); -+ vp++; -+ -+ /* ledbh3 */ -+ vp += sprintf(vp, "ledbh3=%d", (w >> 8) & 0xff); -+ vp++; -+ } -+ /* LED Powersave duty cycle (oncount >> 24) (offcount >> 8) */ -+ if (w != 0xffff) { -+ w = b[SROM4_LEDDC]; -+ w32 = ((uint32)((unsigned char)(w >> 8) & 0xff) << 24) | /* oncount */ -+ ((uint32)((unsigned char)(w & 0xff)) << 8); /* offcount */ -+ vp += sprintf(vp, "leddc=%d", w32); -+ vp++; -+ } -+ -+ w = b[SROM4_AA]; -+ vp += sprintf(vp, "aa2g=%d", w & SROM4_AA2G_MASK); -+ vp++; -+ vp += sprintf(vp, "aa5g=%d", w >> SROM4_AA5G_SHIFT); -+ vp++; -+ -+ w = b[SROM4_AG10]; -+ vp += sprintf(vp, "ag0=%d", w & 0xff); -+ vp++; -+ vp += sprintf(vp, "ag1=%d", (w >> 8) & 0xff); -+ vp++; -+ w = b[SROM4_AG32]; -+ vp += sprintf(vp, "ag2=%d", w & 0xff); -+ vp++; -+ vp += sprintf(vp, "ag3=%d", (w >> 8) & 0xff); -+ vp++; -+ -+ /* Fixed power indices when power control is disabled */ -+ for (i = 0; i < 2; i++) { -+ w = b[SROM4_TXPID2G + i]; -+ vp += sprintf(vp, "txpid2ga%d=%d", 2 * i, w & 0xff); -+ vp++; -+ vp += sprintf(vp, "txpid2ga%d=%d", (2 * i) + 1, (w >> 8) & 0xff); -+ vp++; -+ w = b[SROM4_TXPID5G + i]; -+ vp += sprintf(vp, "txpid5ga%d=%d", 2 * i, w & 0xff); -+ vp++; -+ vp += sprintf(vp, "txpid5ga%d=%d", (2 * i) + 1, (w >> 8) & 0xff); -+ vp++; -+ w = b[SROM4_TXPID5GL + i]; -+ vp += sprintf(vp, "txpid5gla%d=%d", 2 * i, w & 0xff); -+ vp++; -+ vp += sprintf(vp, "txpid5gla%d=%d", (2 * i) + 1, (w >> 8) & 0xff); -+ vp++; -+ w = b[SROM4_TXPID5GH + i]; -+ vp += sprintf(vp, "txpid5gha%d=%d", 2 * i, w & 0xff); -+ vp++; -+ vp += sprintf(vp, "txpid5gha%d=%d", (2 * i) + 1, (w >> 8) & 0xff); -+ vp++; -+ } -+ -+ /* Per path variables */ -+ for (path = 0; path < MAX_PATH; path++) { -+ pathbase = pathbases[path]; -+ w = b[pathbase + SROM4_2G_ITT_MAXP]; -+ vp += sprintf(vp, "itt2ga%d=%d", path, w >> B2G_ITT_SHIFT); -+ vp++; -+ vp += sprintf(vp, "maxp2ga%d=%d", path, w & B2G_MAXP_MASK); -+ vp++; -+ -+ for (i = 0; i < 4; i++) { -+ vp += sprintf(vp, "pa2gw%da%d=%d", i, path, -+ b[pathbase + SROM4_2G_PA + i]); -+ vp++; -+ } -+ -+ w = b[pathbase + SROM4_5G_ITT_MAXP]; -+ vp += sprintf(vp, "itt5ga%d=%d", path, w >> B5G_ITT_SHIFT); -+ vp++; -+ vp += sprintf(vp, "maxp5ga%d=%d", path, w & B5G_MAXP_MASK); -+ vp++; -+ -+ w = b[pathbase + SROM4_5GLH_MAXP]; -+ vp += sprintf(vp, "maxp5lga%d=%d", path, w >> B5GL_MAXP_SHIFT); -+ vp++; -+ vp += sprintf(vp, "maxp5gha%d=%d", path, w & B5GH_MAXP_MASK); -+ vp++; -+ -+ for (i = 0; i < 4; i++) { -+ vp += sprintf(vp, "pa5gw%da%d=%d", i, path, -+ b[pathbase + SROM4_5G_PA + i]); -+ vp++; -+ vp += sprintf(vp, "pa5glw%da%d=%d", i, path, -+ b[pathbase + SROM4_5GL_PA + i]); -+ vp++; -+ vp += sprintf(vp, "pa5hgw%da%d=%d", i, path, -+ b[pathbase + SROM4_5GH_PA + i]); -+ vp++; -+ } -+ } -+ -+ vp += sprintf(vp, "cck2gpo=%d", b[SROM4_2G_CCKPO]); -+ vp++; -+ -+ w32 = ((uint32)b[SROM4_2G_OFDMPO + 1] << 16) | b[SROM4_2G_OFDMPO]; -+ vp += sprintf(vp, "ofdm2gpo=%d", w32); -+ vp++; -+ -+ w32 = ((uint32)b[SROM4_5G_OFDMPO + 1] << 16) | b[SROM4_5G_OFDMPO]; -+ vp += sprintf(vp, "ofdm5gpo=%d", w32); -+ vp++; -+ -+ w32 = ((uint32)b[SROM4_5GL_OFDMPO + 1] << 16) | b[SROM4_5GL_OFDMPO]; -+ vp += sprintf(vp, "ofdm5glpo=%d", w32); -+ vp++; -+ -+ w32 = ((uint32)b[SROM4_5GH_OFDMPO + 1] << 16) | b[SROM4_5GH_OFDMPO]; -+ vp += sprintf(vp, "ofdm5ghpo=%d", w32); -+ vp++; -+ -+ for (i = 0; i < 8; i++) { -+ vp += sprintf(vp, "mcs2gpo%d=%d", i, b[SROM4_2G_MCSPO]); -+ vp++; -+ vp += sprintf(vp, "mcs5gpo%d=%d", i, b[SROM4_5G_MCSPO]); -+ vp++; -+ vp += sprintf(vp, "mcs5glpo%d=%d", i, b[SROM4_5GL_MCSPO]); -+ vp++; -+ vp += sprintf(vp, "mcs5ghpo%d=%d", i, b[SROM4_5GH_MCSPO]); -+ vp++; -+ } -+ -+ vp += sprintf(vp, "ccdpo%d=%d", i, b[SROM4_CCDPO]); -+ vp++; -+ vp += sprintf(vp, "stbcpo%d=%d", i, b[SROM4_STBCPO]); -+ vp++; -+ vp += sprintf(vp, "bw40po%d=%d", i, b[SROM4_BW40PO]); -+ vp++; -+ vp += sprintf(vp, "bwduppo%d=%d", i, b[SROM4_BWDUPPO]); -+ vp++; -+ -+ goto done; -+ } -+ if (sromrev >= 3) { -+ /* New section takes over the 3th hardware function space */ -+ -+ /* Words 22+23 are 11a (mid) ofdm power offsets */ -+ w32 = ((uint32)b[23] << 16) | b[22]; -+ vp += sprintf(vp, "ofdmapo=%d", w32); -+ vp++; -+ -+ /* Words 24+25 are 11a (low) ofdm power offsets */ -+ w32 = ((uint32)b[25] << 16) | b[24]; -+ vp += sprintf(vp, "ofdmalpo=%d", w32); -+ vp++; -+ -+ /* Words 26+27 are 11a (high) ofdm power offsets */ -+ w32 = ((uint32)b[27] << 16) | b[26]; -+ vp += sprintf(vp, "ofdmahpo=%d", w32); -+ vp++; -+ -+ /* LED Powersave duty cycle (oncount >> 24) (offcount >> 8) */ -+ w32 = ((uint32)((unsigned char)(b[21] >> 8) & 0xff) << 24) | /* oncount */ -+ ((uint32)((unsigned char)(b[21] & 0xff)) << 8); /* offcount */ -+ vp += sprintf(vp, "leddc=%d", w32); -+ -+ vp++; -+ } -+ -+ if (sromrev >= 2) { -+ /* New section takes over the 4th hardware function space */ -+ -+ /* Word 29 is max power 11a high/low */ -+ w = b[29]; -+ vp += sprintf(vp, "pa1himaxpwr=%d", w & 0xff); -+ vp++; -+ vp += sprintf(vp, "pa1lomaxpwr=%d", (w >> 8) & 0xff); -+ vp++; -+ -+ /* Words 30-32 set the 11alow pa settings, -+ * 33-35 are the 11ahigh ones. -+ */ -+ for (i = 0; i < 3; i++) { -+ vp += sprintf(vp, "pa1lob%d=%d", i, b[30 + i]); -+ vp++; -+ vp += sprintf(vp, "pa1hib%d=%d", i, b[33 + i]); -+ vp++; -+ } -+ w = b[59]; -+ if (w == 0) -+ vp += sprintf(vp, "ccode="); -+ else -+ vp += sprintf(vp, "ccode=%c%c", (w >> 8), (w & 0xff)); -+ vp++; -+ -+ } -+ -+ /* parameter section of sprom starts at byte offset 72 */ -+ woff = 72/2; -+ -+ /* first 6 bytes are il0macaddr */ -+ ea.octet[0] = (b[woff] >> 8) & 0xff; -+ ea.octet[1] = b[woff] & 0xff; -+ ea.octet[2] = (b[woff+1] >> 8) & 0xff; -+ ea.octet[3] = b[woff+1] & 0xff; -+ ea.octet[4] = (b[woff+2] >> 8) & 0xff; -+ ea.octet[5] = b[woff+2] & 0xff; -+ woff += 3; -+ bcm_ether_ntoa(&ea, eabuf); -+ vp += sprintf(vp, "il0macaddr=%s", eabuf); -+ vp++; -+ -+ /* next 6 bytes are et0macaddr */ -+ ea.octet[0] = (b[woff] >> 8) & 0xff; -+ ea.octet[1] = b[woff] & 0xff; -+ ea.octet[2] = (b[woff+1] >> 8) & 0xff; -+ ea.octet[3] = b[woff+1] & 0xff; -+ ea.octet[4] = (b[woff+2] >> 8) & 0xff; -+ ea.octet[5] = b[woff+2] & 0xff; -+ woff += 3; -+ bcm_ether_ntoa(&ea, eabuf); -+ vp += sprintf(vp, "et0macaddr=%s", eabuf); -+ vp++; -+ -+ /* next 6 bytes are et1macaddr */ -+ ea.octet[0] = (b[woff] >> 8) & 0xff; -+ ea.octet[1] = b[woff] & 0xff; -+ ea.octet[2] = (b[woff+1] >> 8) & 0xff; -+ ea.octet[3] = b[woff+1] & 0xff; -+ ea.octet[4] = (b[woff+2] >> 8) & 0xff; -+ ea.octet[5] = b[woff+2] & 0xff; -+ woff += 3; -+ bcm_ether_ntoa(&ea, eabuf); -+ vp += sprintf(vp, "et1macaddr=%s", eabuf); -+ vp++; -+ -+ /* -+ * Enet phy settings one or two singles or a dual -+ * Bits 4-0 : MII address for enet0 (0x1f for not there) -+ * Bits 9-5 : MII address for enet1 (0x1f for not there) -+ * Bit 14 : Mdio for enet0 -+ * Bit 15 : Mdio for enet1 -+ */ -+ w = b[woff]; -+ vp += sprintf(vp, "et0phyaddr=%d", (w & 0x1f)); -+ vp++; -+ vp += sprintf(vp, "et1phyaddr=%d", ((w >> 5) & 0x1f)); -+ vp++; -+ vp += sprintf(vp, "et0mdcport=%d", ((w >> 14) & 0x1)); -+ vp++; -+ vp += sprintf(vp, "et1mdcport=%d", ((w >> 15) & 0x1)); -+ vp++; -+ -+ /* Word 46 has board rev, antennas 0/1 & Country code/control */ -+ w = b[46]; -+ vp += sprintf(vp, "boardrev=%d", w & 0xff); -+ vp++; -+ -+ if (sromrev > 1) -+ vp += sprintf(vp, "cctl=%d", (w >> 8) & 0xf); -+ else -+ vp += sprintf(vp, "cc=%d", (w >> 8) & 0xf); -+ vp++; -+ -+ vp += sprintf(vp, "aa2g=%d", (w >> 12) & 0x3); -+ vp++; -+ -+ vp += sprintf(vp, "aa5g=%d", (w >> 14) & 0x3); -+ vp++; -+ -+ /* Words 47-49 set the (wl) pa settings */ -+ woff = 47; -+ -+ for (i = 0; i < 3; i++) { -+ vp += sprintf(vp, "pa0b%d=%d", i, b[woff+i]); -+ vp++; -+ vp += sprintf(vp, "pa1b%d=%d", i, b[woff+i+6]); -+ vp++; -+ } -+ -+ /* -+ * Words 50-51 set the customer-configured wl led behavior. -+ * 8 bits/gpio pin. High bit: activehi=0, activelo=1; -+ * LED behavior values defined in wlioctl.h . -+ */ -+ w = b[50]; -+ if ((w != 0) && (w != 0xffff)) { -+ /* ledbh0 */ -+ vp += sprintf(vp, "ledbh0=%d", (w & 0xff)); -+ vp++; -+ -+ /* ledbh1 */ -+ vp += sprintf(vp, "ledbh1=%d", (w >> 8) & 0xff); -+ vp++; -+ } -+ w = b[51]; -+ if ((w != 0) && (w != 0xffff)) { -+ /* ledbh2 */ -+ vp += sprintf(vp, "ledbh2=%d", w & 0xff); -+ vp++; -+ -+ /* ledbh */ -+ vp += sprintf(vp, "ledbh3=%d", (w >> 8) & 0xff); -+ vp++; -+ } -+ -+ /* Word 52 is max power 0/1 */ -+ w = b[52]; -+ vp += sprintf(vp, "pa0maxpwr=%d", w & 0xff); -+ vp++; -+ vp += sprintf(vp, "pa1maxpwr=%d", (w >> 8) & 0xff); -+ vp++; -+ -+ /* Word 56 is idle tssi target 0/1 */ -+ w = b[56]; -+ vp += sprintf(vp, "pa0itssit=%d", w & 0xff); -+ vp++; -+ vp += sprintf(vp, "pa1itssit=%d", (w >> 8) & 0xff); -+ vp++; -+ -+ /* Word 57 is boardflags, if not programmed make it zero */ -+ w32 = (uint32)b[57]; -+ if (w32 == 0xffff) w32 = 0; -+ if (sromrev > 1) { -+ /* Word 28 is the high bits of boardflags */ -+ w32 |= (uint32)b[28] << 16; -+ } -+ vp += sprintf(vp, "boardflags=%d", w32); -+ vp++; -+ -+ /* Word 58 is antenna gain 0/1 */ -+ w = b[58]; -+ vp += sprintf(vp, "ag0=%d", w & 0xff); -+ vp++; -+ -+ vp += sprintf(vp, "ag1=%d", (w >> 8) & 0xff); -+ vp++; -+ -+ if (sromrev == 1) { -+ /* set the oem string */ -+ vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x", -+ ((b[59] >> 8) & 0xff), (b[59] & 0xff), -+ ((b[60] >> 8) & 0xff), (b[60] & 0xff), -+ ((b[61] >> 8) & 0xff), (b[61] & 0xff), -+ ((b[62] >> 8) & 0xff), (b[62] & 0xff)); -+ vp++; -+ } else if (sromrev == 2) { -+ /* Word 60 OFDM tx power offset from CCK level */ -+ /* OFDM Power Offset - opo */ -+ vp += sprintf(vp, "opo=%d", b[60] & 0xff); -+ vp++; -+ } else { -+ /* Word 60: cck power offsets */ -+ vp += sprintf(vp, "cckpo=%d", b[60]); -+ vp++; -+ -+ /* Words 61+62: 11g ofdm power offsets */ -+ w32 = ((uint32)b[62] << 16) | b[61]; -+ vp += sprintf(vp, "ofdmgpo=%d", w32); -+ vp++; -+ } -+ -+ /* final nullbyte terminator */ -+done: *vp++ = '\0'; -+ -+ ASSERT((vp - base) <= VARS_MAX); -+ -+varsdone: -+ err = initvars_table(osh, base, vp, vars, count); -+ -+err: -+#ifdef WLTEST -+ if (base != mfgsromvars) -+#endif -+ MFREE(osh, base, VARS_MAX); -+ MFREE(osh, b, SROM_MAX); -+ return err; -+} -+ -+/* -+ * Read the cis and call parsecis to initialize the vars. -+ * Return 0 on success, nonzero on error. -+ */ -+static int -+initvars_cis_pcmcia(void *sbh, osl_t *osh, char **vars, uint *count) -+{ -+ uint8 *cis = NULL; -+ int rc; -+ uint data_sz; -+ -+ data_sz = (sb_pcmciarev(sbh) == 1) ? (SPROM_SIZE * 2) : CIS_SIZE; -+ -+ if ((cis = MALLOC(osh, data_sz)) == NULL) -+ return (-2); -+ -+ if (sb_pcmciarev(sbh) == 1) { -+ if (srom_read(PCMCIA_BUS, (void *)NULL, osh, 0, data_sz, (uint16 *)cis)) { -+ MFREE(osh, cis, data_sz); -+ return (-1); -+ } -+ /* fix up endianess for 16-bit data vs 8-bit parsing */ -+ ltoh16_buf((uint16 *)cis, data_sz); -+ } else -+ OSL_PCMCIA_READ_ATTR(osh, 0, cis, data_sz); -+ -+ rc = srom_parsecis(osh, &cis, 1, vars, count); -+ -+ MFREE(osh, cis, data_sz); -+ -+ return (rc); -+} -+ -diff -urN linux.old/arch/mips/bcm947xx/bcmutils.c linux.dev/arch/mips/bcm947xx/bcmutils.c ---- linux.old/arch/mips/bcm947xx/bcmutils.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/bcmutils.c 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,247 @@ -+/* -+ * Misc useful OS-independent routines. -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id: bcmutils.c,v 1.1.1.12 2006/02/27 03:43:16 honor Exp $ -+ */ -+ -+#include <typedefs.h> -+#include <bcmdefs.h> -+#include <stdarg.h> -+#include <bcmutils.h> -+#include <osl.h> -+#include <sbutils.h> -+#include <bcmnvram.h> -+#include <bcmendian.h> -+#include <bcmdevs.h> -+ -+unsigned char bcm_ctype[] = { -+ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 0-7 */ -+ _BCM_C, _BCM_C|_BCM_S, _BCM_C|_BCM_S, _BCM_C|_BCM_S, _BCM_C|_BCM_S, _BCM_C|_BCM_S, _BCM_C, -+ _BCM_C, /* 8-15 */ -+ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 16-23 */ -+ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 24-31 */ -+ _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 32-39 */ -+ _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 40-47 */ -+ _BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D, /* 48-55 */ -+ _BCM_D,_BCM_D,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 56-63 */ -+ _BCM_P, _BCM_U|_BCM_X, _BCM_U|_BCM_X, _BCM_U|_BCM_X, _BCM_U|_BCM_X, _BCM_U|_BCM_X, -+ _BCM_U|_BCM_X, _BCM_U, /* 64-71 */ -+ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 72-79 */ -+ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 80-87 */ -+ _BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 88-95 */ -+ _BCM_P, _BCM_L|_BCM_X, _BCM_L|_BCM_X, _BCM_L|_BCM_X, _BCM_L|_BCM_X, _BCM_L|_BCM_X, -+ _BCM_L|_BCM_X, _BCM_L, /* 96-103 */ -+ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 104-111 */ -+ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 112-119 */ -+ _BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_C, /* 120-127 */ -+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 128-143 */ -+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 144-159 */ -+ _BCM_S|_BCM_SP, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, -+ _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, /* 160-175 */ -+ _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, -+ _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, /* 176-191 */ -+ _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, -+ _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, /* 192-207 */ -+ _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_P, _BCM_U, _BCM_U, _BCM_U, -+ _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_L, /* 208-223 */ -+ _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, -+ _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, /* 224-239 */ -+ _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_P, _BCM_L, _BCM_L, _BCM_L, -+ _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L /* 240-255 */ -+}; -+ -+ -+ulong -+bcm_strtoul(char *cp, char **endp, uint base) -+{ -+ ulong result, value; -+ bool minus; -+ -+ minus = FALSE; -+ -+ while (bcm_isspace(*cp)) -+ cp++; -+ -+ if (cp[0] == '+') -+ cp++; -+ else if (cp[0] == '-') { -+ minus = TRUE; -+ cp++; -+ } -+ -+ if (base == 0) { -+ if (cp[0] == '0') { -+ if ((cp[1] == 'x') || (cp[1] == 'X')) { -+ base = 16; -+ cp = &cp[2]; -+ } else { -+ base = 8; -+ cp = &cp[1]; -+ } -+ } else -+ base = 10; -+ } else if (base == 16 && (cp[0] == '0') && ((cp[1] == 'x') || (cp[1] == 'X'))) { -+ cp = &cp[2]; -+ } -+ -+ result = 0; -+ -+ while (bcm_isxdigit(*cp) && -+ (value = bcm_isdigit(*cp) ? *cp-'0' : bcm_toupper(*cp)-'A'+10) < base) { -+ result = result*base + value; -+ cp++; -+ } -+ -+ if (minus) -+ result = (ulong)(result * -1); -+ -+ if (endp) -+ *endp = (char *)cp; -+ -+ return (result); -+} -+ -+uchar -+bcm_toupper(uchar c) -+{ -+ if (bcm_islower(c)) -+ c -= 'a'-'A'; -+ return (c); -+} -+ -+char* -+bcm_ether_ntoa(struct ether_addr *ea, char *buf) -+{ -+ sprintf(buf, "%02x:%02x:%02x:%02x:%02x:%02x", -+ ea->octet[0]&0xff, ea->octet[1]&0xff, ea->octet[2]&0xff, -+ ea->octet[3]&0xff, ea->octet[4]&0xff, ea->octet[5]&0xff); -+ return (buf); -+} -+ -+ -+/* -+ * Search the name=value vars for a specific one and return its value. -+ * Returns NULL if not found. -+ */ -+char* -+getvar(char *vars, char *name) -+{ -+ char *s; -+ int len; -+ -+ len = strlen(name); -+ -+ /* first look in vars[] */ -+ for (s = vars; s && *s;) { -+ /* CSTYLED */ -+ if ((memcmp(s, name, len) == 0) && (s[len] == '=')) -+ return (&s[len+1]); -+ -+ while (*s++) -+ ; -+ } -+ -+ /* then query nvram */ -+ return (nvram_get(name)); -+} -+ -+/* -+ * Search the vars for a specific one and return its value as -+ * an integer. Returns 0 if not found. -+ */ -+int -+getintvar(char *vars, char *name) -+{ -+ char *val; -+ -+ if ((val = getvar(vars, name)) == NULL) -+ return (0); -+ -+ return (bcm_strtoul(val, NULL, 0)); -+} -+ -+ -+/******************************************************************************* -+ * crc8 -+ * -+ * Computes a crc8 over the input data using the polynomial: -+ * -+ * x^8 + x^7 +x^6 + x^4 + x^2 + 1 -+ * -+ * The caller provides the initial value (either CRC8_INIT_VALUE -+ * or the previous returned value) to allow for processing of -+ * discontiguous blocks of data. When generating the CRC the -+ * caller is responsible for complementing the final return value -+ * and inserting it into the byte stream. When checking, a final -+ * return value of CRC8_GOOD_VALUE indicates a valid CRC. -+ * -+ * Reference: Dallas Semiconductor Application Note 27 -+ * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", -+ * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd., -+ * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt -+ * -+ * **************************************************************************** -+ */ -+ -+static uint8 crc8_table[256] = { -+ 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B, -+ 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21, -+ 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF, -+ 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5, -+ 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14, -+ 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E, -+ 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80, -+ 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA, -+ 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95, -+ 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF, -+ 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01, -+ 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B, -+ 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA, -+ 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0, -+ 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E, -+ 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34, -+ 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0, -+ 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A, -+ 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54, -+ 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E, -+ 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF, -+ 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5, -+ 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B, -+ 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61, -+ 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E, -+ 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74, -+ 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA, -+ 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0, -+ 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41, -+ 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B, -+ 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5, -+ 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F -+}; -+ -+#define CRC_INNER_LOOP(n, c, x) \ -+ (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff] -+ -+uint8 -+hndcrc8( -+ uint8 *pdata, /* pointer to array of data to process */ -+ uint nbytes, /* number of input data bytes to process */ -+ uint8 crc /* either CRC8_INIT_VALUE or previous return value */ -+) -+{ -+ /* hard code the crc loop instead of using CRC_INNER_LOOP macro -+ * to avoid the undefined and unnecessary (uint8 >> 8) operation. -+ */ -+ while (nbytes-- > 0) -+ crc = crc8_table[(crc ^ *pdata++) & 0xff]; -+ -+ return crc; -+} -+ -+ -diff -urN linux.old/arch/mips/bcm947xx/cfe_env.c linux.dev/arch/mips/bcm947xx/cfe_env.c ---- linux.old/arch/mips/bcm947xx/cfe_env.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/cfe_env.c 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,234 @@ -+/* -+ * NVRAM variable manipulation (Linux kernel half) -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ -+ -+#include <linux/config.h> -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/string.h> -+#include <asm/io.h> -+#include <asm/uaccess.h> -+ -+#include <typedefs.h> -+#include <osl.h> -+#include <bcmendian.h> -+#include <bcmutils.h> -+ -+#define NVRAM_SIZE (0x1ff0) -+static char _nvdata[NVRAM_SIZE] __initdata; -+static char _valuestr[256] __initdata; -+ -+/* -+ * TLV types. These codes are used in the "type-length-value" -+ * encoding of the items stored in the NVRAM device (flash or EEPROM) -+ * -+ * The layout of the flash/nvram is as follows: -+ * -+ * <type> <length> <data ...> <type> <length> <data ...> <type_end> -+ * -+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list. -+ * The "length" field marks the length of the data section, not -+ * including the type and length fields. -+ * -+ * Environment variables are stored as follows: -+ * -+ * <type_env> <length> <flags> <name> = <value> -+ * -+ * If bit 0 (low bit) is set, the length is an 8-bit value. -+ * If bit 0 (low bit) is clear, the length is a 16-bit value -+ * -+ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still -+ * indicates the size of the length field. -+ * -+ * Flags are from the constants below: -+ * -+ */ -+#define ENV_LENGTH_16BITS 0x00 /* for low bit */ -+#define ENV_LENGTH_8BITS 0x01 -+ -+#define ENV_TYPE_USER 0x80 -+ -+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l)) -+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER) -+ -+/* -+ * The actual TLV types we support -+ */ -+ -+#define ENV_TLV_TYPE_END 0x00 -+#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS) -+ -+/* -+ * Environment variable flags -+ */ -+ -+#define ENV_FLG_NORMAL 0x00 /* normal read/write */ -+#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */ -+#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */ -+ -+#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */ -+#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */ -+ -+ -+/* ********************************************************************* -+ * _nvram_read(buffer,offset,length) -+ * -+ * Read data from the NVRAM device -+ * -+ * Input parameters: -+ * buffer - destination buffer -+ * offset - offset of data to read -+ * length - number of bytes to read -+ * -+ * Return value: -+ * number of bytes read, or <0 if error occured -+ ********************************************************************* */ -+static int -+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length) -+{ -+ int i; -+ if (offset > NVRAM_SIZE) -+ return -1; -+ -+ for ( i = 0; i < length; i++) { -+ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i]; -+ } -+ return length; -+} -+ -+ -+static char* -+_strnchr(const char *dest,int c,size_t cnt) -+{ -+ while (*dest && (cnt > 0)) { -+ if (*dest == c) return (char *) dest; -+ dest++; -+ cnt--; -+ } -+ return NULL; -+} -+ -+ -+ -+/* -+ * Core support API: Externally visible. -+ */ -+ -+/* -+ * Get the value of an NVRAM variable -+ * @param name name of variable to get -+ * @return value of variable or NULL if undefined -+ */ -+ -+char* -+cfe_env_get(unsigned char *nv_buf, char* name) -+{ -+ int size; -+ unsigned char *buffer; -+ unsigned char *ptr; -+ unsigned char *envval; -+ unsigned int reclen; -+ unsigned int rectype; -+ int offset; -+ int flg; -+ -+ size = NVRAM_SIZE; -+ buffer = &_nvdata[0]; -+ -+ ptr = buffer; -+ offset = 0; -+ -+ /* Read the record type and length */ -+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) { -+ goto error; -+ } -+ -+ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) { -+ -+ /* Adjust pointer for TLV type */ -+ rectype = *(ptr); -+ offset++; -+ size--; -+ -+ /* -+ * Read the length. It can be either 1 or 2 bytes -+ * depending on the code -+ */ -+ if (rectype & ENV_LENGTH_8BITS) { -+ /* Read the record type and length - 8 bits */ -+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) { -+ goto error; -+ } -+ reclen = *(ptr); -+ size--; -+ offset++; -+ } -+ else { -+ /* Read the record type and length - 16 bits, MSB first */ -+ if (_nvram_read(nv_buf, ptr,offset,2) != 2) { -+ goto error; -+ } -+ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1); -+ size -= 2; -+ offset += 2; -+ } -+ -+ if (reclen > size) -+ break; /* should not happen, bad NVRAM */ -+ -+ switch (rectype) { -+ case ENV_TLV_TYPE_ENV: -+ /* Read the TLV data */ -+ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen) -+ goto error; -+ flg = *ptr++; -+ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1)); -+ if (envval) { -+ *envval++ = '\0'; -+ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr)); -+ _valuestr[(reclen-1)-(envval-ptr)] = '\0'; -+#if 0 -+ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr); -+#endif -+ if(!strcmp(ptr, name)){ -+ return _valuestr; -+ } -+ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name)) -+ return _valuestr; -+ } -+ break; -+ -+ default: -+ /* Unknown TLV type, skip it. */ -+ break; -+ } -+ -+ /* -+ * Advance to next TLV -+ */ -+ -+ size -= (int)reclen; -+ offset += reclen; -+ -+ /* Read the next record type */ -+ ptr = buffer; -+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) -+ goto error; -+ } -+ -+error: -+ return NULL; -+ -+} -+ -diff -urN linux.old/arch/mips/bcm947xx/compressed/Makefile linux.dev/arch/mips/bcm947xx/compressed/Makefile ---- linux.old/arch/mips/bcm947xx/compressed/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/compressed/Makefile 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,33 @@ -+# -+# Makefile for Broadcom BCM947XX boards -+# -+# Copyright 2001-2003, Broadcom Corporation -+# All Rights Reserved. -+# -+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+# -+# $Id: Makefile,v 1.2 2005/04/02 12:12:57 wbx Exp $ -+# -+ -+OBJCOPY_ARGS = -O binary -R .reginfo -R .note -R .comment -R .mdebug -S -+SYSTEM ?= $(TOPDIR)/vmlinux -+ -+all: vmlinuz -+ -+# Don't build dependencies, this may die if $(CC) isn't gcc -+dep: -+ -+# Create a gzipped version named vmlinuz for compatibility -+vmlinuz: piggy -+ gzip -c9 $< > $@ -+ -+piggy: $(SYSTEM) -+ $(OBJCOPY) $(OBJCOPY_ARGS) $< $@ -+ -+mrproper: clean -+ -+clean: -+ rm -f vmlinuz piggy -diff -urN linux.old/arch/mips/bcm947xx/export.c linux.dev/arch/mips/bcm947xx/export.c ---- linux.old/arch/mips/bcm947xx/export.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/export.c 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,71 @@ -+#include <linux/module.h> -+ -+#define _export(n) \ -+ void n(void); \ -+ EXPORT_SYMBOL(n); -+ -+_export(bcm947xx_sbh) -+ -+_export(sb_attach) -+_export(sb_kattach) -+_export(sb_boardtype) -+_export(sb_boardvendor) -+_export(sb_btcgpiowar) -+_export(sb_bus) -+_export(sb_chip) -+_export(sb_chiprev) -+_export(sb_chipcrev) -+_export(sb_chippkg) -+_export(sb_clkctl_clk) -+_export(sb_clkctl_fast_pwrup_delay) -+_export(sb_clkctl_init) -+_export(sb_clkctl_xtal) -+_export(sb_core_disable) -+_export(sb_core_reset) -+_export(sb_core_tofixup) -+_export(sb_coreflags) -+_export(sb_coreflagshi) -+_export(sb_coreidx) -+_export(sb_coreregs) -+_export(sb_corerev) -+_export(sb_coreunit) -+_export(sb_detach) -+_export(sb_deviceremoved) -+_export(sb_gpiosetcore) -+_export(sb_gpiocontrol) -+_export(sb_gpiointmask) -+_export(sb_gpiointpolarity) -+_export(sb_gpioled) -+_export(sb_gpioin) -+_export(sb_gpioout) -+_export(sb_gpioouten) -+_export(sb_gpiotimerval) -+_export(sb_irq) -+_export(sb_iscoreup) -+_export(sb_pci_setup) -+_export(sb_pcirev) -+_export(sb_pcmcia_init) -+_export(sb_pcmciarev) -+_export(sb_register_intr_callback) -+_export(sb_setcore) -+_export(sb_setcoreidx) -+_export(sb_war16165) -+_export(sb_war32414_forceHT) -+_export(sb_osh) -+ -+_export(getvar) -+_export(getintvar) -+_export(bcm_strtoul) -+_export(bcm_ctype) -+_export(bcm_toupper) -+_export(bcm_ether_ntoa) -+ -+_export(nvram_get) -+_export(nvram_getall) -+_export(nvram_set) -+_export(nvram_unset) -+_export(nvram_commit) -+ -+_export(srom_read) -+_export(srom_write) -+ -diff -urN linux.old/arch/mips/bcm947xx/generic/int-handler.S linux.dev/arch/mips/bcm947xx/generic/int-handler.S ---- linux.old/arch/mips/bcm947xx/generic/int-handler.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/generic/int-handler.S 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,51 @@ -+/* -+ * Generic interrupt handler for Broadcom MIPS boards -+ * -+ * Copyright 2004, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: int-handler.S,v 1.1 2005/03/16 13:50:00 wbx Exp $ -+ */ -+ -+#include <linux/config.h> -+ -+#include <asm/asm.h> -+#include <asm/mipsregs.h> -+#include <asm/regdef.h> -+#include <asm/stackframe.h> -+ -+/* -+ * MIPS IRQ Source -+ * -------- ------ -+ * 0 Software (ignored) -+ * 1 Software (ignored) -+ * 2 Combined hardware interrupt (hw0) -+ * 3 Hardware -+ * 4 Hardware -+ * 5 Hardware -+ * 6 Hardware -+ * 7 R4k timer -+ */ -+ -+ .text -+ .set noreorder -+ .set noat -+ .align 5 -+ NESTED(brcmIRQ, PT_SIZE, sp) -+ SAVE_ALL -+ CLI -+ .set at -+ .set noreorder -+ -+ jal brcm_irq_dispatch -+ move a0, sp -+ -+ j ret_from_irq -+ nop -+ -+ END(brcmIRQ) -diff -urN linux.old/arch/mips/bcm947xx/generic/irq.c linux.dev/arch/mips/bcm947xx/generic/irq.c ---- linux.old/arch/mips/bcm947xx/generic/irq.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/generic/irq.c 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,130 @@ -+/* -+ * Generic interrupt control functions for Broadcom MIPS boards -+ * -+ * Copyright 2004, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: irq.c,v 1.1 2005/03/16 13:50:00 wbx Exp $ -+ */ -+ -+#include <linux/config.h> -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/types.h> -+#include <linux/interrupt.h> -+#include <linux/irq.h> -+ -+#include <asm/irq.h> -+#include <asm/mipsregs.h> -+#include <asm/gdb-stub.h> -+ -+#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5) -+ -+extern asmlinkage void brcmIRQ(void); -+extern asmlinkage unsigned int do_IRQ(int irq, struct pt_regs *regs); -+ -+void -+brcm_irq_dispatch(struct pt_regs *regs) -+{ -+ u32 cause; -+ -+ cause = read_c0_cause() & -+ read_c0_status() & -+ CAUSEF_IP; -+ -+#ifdef CONFIG_KERNPROF -+ change_c0_status(cause | 1, 1); -+#else -+ clear_c0_status(cause); -+#endif -+ -+ if (cause & CAUSEF_IP7) -+ do_IRQ(7, regs); -+ if (cause & CAUSEF_IP2) -+ do_IRQ(2, regs); -+ if (cause & CAUSEF_IP3) -+ do_IRQ(3, regs); -+ if (cause & CAUSEF_IP4) -+ do_IRQ(4, regs); -+ if (cause & CAUSEF_IP5) -+ do_IRQ(5, regs); -+ if (cause & CAUSEF_IP6) -+ do_IRQ(6, regs); -+} -+ -+static void -+enable_brcm_irq(unsigned int irq) -+{ -+ if (irq < 8) -+ set_c0_status(1 << (irq + 8)); -+ else -+ set_c0_status(IE_IRQ0); -+} -+ -+static void -+disable_brcm_irq(unsigned int irq) -+{ -+ if (irq < 8) -+ clear_c0_status(1 << (irq + 8)); -+ else -+ clear_c0_status(IE_IRQ0); -+} -+ -+static void -+ack_brcm_irq(unsigned int irq) -+{ -+ /* Already done in brcm_irq_dispatch */ -+} -+ -+static unsigned int -+startup_brcm_irq(unsigned int irq) -+{ -+ enable_brcm_irq(irq); -+ -+ return 0; /* never anything pending */ -+} -+ -+static void -+end_brcm_irq(unsigned int irq) -+{ -+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) -+ enable_brcm_irq(irq); -+} -+ -+static struct hw_interrupt_type brcm_irq_type = { -+ typename: "MIPS", -+ startup: startup_brcm_irq, -+ shutdown: disable_brcm_irq, -+ enable: enable_brcm_irq, -+ disable: disable_brcm_irq, -+ ack: ack_brcm_irq, -+ end: end_brcm_irq, -+ NULL -+}; -+ -+void __init -+init_IRQ(void) -+{ -+ int i; -+ -+ for (i = 0; i < NR_IRQS; i++) { -+ irq_desc[i].status = IRQ_DISABLED; -+ irq_desc[i].action = 0; -+ irq_desc[i].depth = 1; -+ irq_desc[i].handler = &brcm_irq_type; -+ } -+ -+ set_except_vector(0, brcmIRQ); -+ change_c0_status(ST0_IM, ALLINTS); -+ -+#ifdef CONFIG_REMOTE_DEBUG -+ printk("Breaking into debugger...\n"); -+ set_debug_traps(); -+ breakpoint(); -+#endif -+} -diff -urN linux.old/arch/mips/bcm947xx/generic/Makefile linux.dev/arch/mips/bcm947xx/generic/Makefile ---- linux.old/arch/mips/bcm947xx/generic/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/generic/Makefile 2006-10-02 21:26:29.000000000 +0200 -@@ -0,0 +1,12 @@ -+# -+# Makefile for the BCM947xx specific kernel interface routines -+# under Linux. -+# -+EXTRA_CFLAGS += -fno-delayed-branch -+USE_STANDARD_AS_RULE := true -+ -+O_TARGET := brcm.o -+ -+obj-y := int-handler.o irq.o -+ -+include $(TOPDIR)/Rules.make -diff -urN linux.old/arch/mips/bcm947xx/gpio.c linux.dev/arch/mips/bcm947xx/gpio.c ---- linux.old/arch/mips/bcm947xx/gpio.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/gpio.c 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,159 @@ -+/* -+ * GPIO char driver -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ -+ -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/fs.h> -+#include <linux/miscdevice.h> -+#include <asm/uaccess.h> -+ -+#include <typedefs.h> -+#include <osl.h> -+#include <bcmutils.h> -+#include <sbutils.h> -+#include <bcmdevs.h> -+ -+static sb_t *gpio_sbh; -+static int gpio_major; -+static devfs_handle_t gpio_dir; -+static struct { -+ char *name; -+ devfs_handle_t handle; -+} gpio_file[] = { -+ { "in", NULL }, -+ { "out", NULL }, -+ { "outen", NULL }, -+ { "control", NULL } -+}; -+ -+static int -+gpio_open(struct inode *inode, struct file * file) -+{ -+ if (MINOR(inode->i_rdev) > ARRAYSIZE(gpio_file)) -+ return -ENODEV; -+ -+ MOD_INC_USE_COUNT; -+ return 0; -+} -+ -+static int -+gpio_release(struct inode *inode, struct file * file) -+{ -+ MOD_DEC_USE_COUNT; -+ return 0; -+} -+ -+static ssize_t -+gpio_read(struct file *file, char *buf, size_t count, loff_t *ppos) -+{ -+ u32 val; -+ -+ switch (MINOR(file->f_dentry->d_inode->i_rdev)) { -+ case 0: -+ val = sb_gpioin(gpio_sbh); -+ break; -+ case 1: -+ val = sb_gpioout(gpio_sbh, 0, 0, GPIO_DRV_PRIORITY); -+ break; -+ case 2: -+ val = sb_gpioouten(gpio_sbh, 0, 0, GPIO_DRV_PRIORITY); -+ break; -+ case 3: -+ val = sb_gpiocontrol(gpio_sbh, 0, 0, GPIO_DRV_PRIORITY); -+ break; -+ default: -+ return -ENODEV; -+ } -+ -+ if (put_user(val, (u32 *) buf)) -+ return -EFAULT; -+ -+ return sizeof(val); -+} -+ -+static ssize_t -+gpio_write(struct file *file, const char *buf, size_t count, loff_t *ppos) -+{ -+ u32 val; -+ -+ if (get_user(val, (u32 *) buf)) -+ return -EFAULT; -+ -+ switch (MINOR(file->f_dentry->d_inode->i_rdev)) { -+ case 0: -+ return -EACCES; -+ case 1: -+ sb_gpioout(gpio_sbh, ~0, val, GPIO_DRV_PRIORITY); -+ break; -+ case 2: -+ sb_gpioouten(gpio_sbh, ~0, val, GPIO_DRV_PRIORITY); -+ break; -+ case 3: -+ sb_gpiocontrol(gpio_sbh, ~0, val, GPIO_DRV_PRIORITY); -+ break; -+ default: -+ return -ENODEV; -+ } -+ -+ return sizeof(val); -+} -+ -+static struct file_operations gpio_fops = { -+ owner: THIS_MODULE, -+ open: gpio_open, -+ release: gpio_release, -+ read: gpio_read, -+ write: gpio_write, -+}; -+ -+static int __init -+gpio_init(void) -+{ -+ int i; -+ -+ if (!(gpio_sbh = sb_kattach())) -+ return -ENODEV; -+ -+ sb_gpiosetcore(gpio_sbh); -+ -+ if ((gpio_major = devfs_register_chrdev(0, "gpio", &gpio_fops)) < 0) -+ return gpio_major; -+ -+ gpio_dir = devfs_mk_dir(NULL, "gpio", NULL); -+ -+ for (i = 0; i < ARRAYSIZE(gpio_file); i++) { -+ gpio_file[i].handle = devfs_register(gpio_dir, -+ gpio_file[i].name, -+ DEVFS_FL_DEFAULT, gpio_major, i, -+ S_IFCHR | S_IRUGO | S_IWUGO, -+ &gpio_fops, NULL); -+ } -+ -+ return 0; -+} -+ -+static void __exit -+gpio_exit(void) -+{ -+ int i; -+ -+ for (i = 0; i < ARRAYSIZE(gpio_file); i++) -+ devfs_unregister(gpio_file[i].handle); -+ devfs_unregister(gpio_dir); -+ devfs_unregister_chrdev(gpio_major, "gpio"); -+ sb_detach(gpio_sbh); -+} -+ -+module_init(gpio_init); -+module_exit(gpio_exit); -diff -urN linux.old/arch/mips/bcm947xx/hndchipc.c linux.dev/arch/mips/bcm947xx/hndchipc.c ---- linux.old/arch/mips/bcm947xx/hndchipc.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/hndchipc.c 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,158 @@ -+/* -+ * BCM47XX support code for some chipcommon (old extif) facilities (uart) -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: hndchipc.c,v 1.1.1.1 2006/02/27 03:43:16 honor Exp $ -+ */ -+ -+#include <typedefs.h> -+#include <bcmdefs.h> -+#include <osl.h> -+#include <bcmutils.h> -+#include <sbutils.h> -+#include <bcmdevs.h> -+#include <bcmnvram.h> -+#include <sbconfig.h> -+#include <sbextif.h> -+#include <sbchipc.h> -+#include <hndcpu.h> -+ -+/* -+ * Returns TRUE if an external UART exists at the given base -+ * register. -+ */ -+static bool -+BCMINITFN(serial_exists)(osl_t *osh, uint8 *regs) -+{ -+ uint8 save_mcr, status1; -+ -+ save_mcr = R_REG(osh, ®s[UART_MCR]); -+ W_REG(osh, ®s[UART_MCR], UART_MCR_LOOP | 0x0a); -+ status1 = R_REG(osh, ®s[UART_MSR]) & 0xf0; -+ W_REG(osh, ®s[UART_MCR], save_mcr); -+ -+ return (status1 == 0x90); -+} -+ -+/* -+ * Initializes UART access. The callback function will be called once -+ * per found UART. -+ */ -+void -+BCMINITFN(sb_serial_init)(sb_t *sbh, void (*add)(void *regs, uint irq, uint baud_base, -+ uint reg_shift)) -+{ -+ osl_t *osh; -+ void *regs; -+ ulong base; -+ uint irq; -+ int i, n; -+ -+ osh = sb_osh(sbh); -+ -+ if ((regs = sb_setcore(sbh, SB_EXTIF, 0))) { -+ extifregs_t *eir = (extifregs_t *) regs; -+ sbconfig_t *sb; -+ -+ /* Determine external UART register base */ -+ sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF); -+ base = EXTIF_CFGIF_BASE(sb_base(R_REG(osh, &sb->sbadmatch1))); -+ -+ /* Determine IRQ */ -+ irq = sb_irq(sbh); -+ -+ /* Disable GPIO interrupt initially */ -+ W_REG(osh, &eir->gpiointpolarity, 0); -+ W_REG(osh, &eir->gpiointmask, 0); -+ -+ /* Search for external UARTs */ -+ n = 2; -+ for (i = 0; i < 2; i++) { -+ regs = (void *) REG_MAP(base + (i * 8), 8); -+ if (serial_exists(osh, regs)) { -+ /* Set GPIO 1 to be the external UART IRQ */ -+ W_REG(osh, &eir->gpiointmask, 2); -+ /* XXXDetermine external UART clock */ -+ if (add) -+ add(regs, irq, 13500000, 0); -+ } -+ } -+ -+ /* Add internal UART if enabled */ -+ if (R_REG(osh, &eir->corecontrol) & CC_UE) -+ if (add) -+ add((void *) &eir->uartdata, irq, sb_clock(sbh), 2); -+ } else if ((regs = sb_setcore(sbh, SB_CC, 0))) { -+ chipcregs_t *cc = (chipcregs_t *) regs; -+ uint32 rev, cap, pll, baud_base, div; -+ -+ /* Determine core revision and capabilities */ -+ rev = sb_corerev(sbh); -+ cap = R_REG(osh, &cc->capabilities); -+ pll = cap & CAP_PLL_MASK; -+ -+ /* Determine IRQ */ -+ irq = sb_irq(sbh); -+ -+ if (pll == PLL_TYPE1) { -+ /* PLL clock */ -+ baud_base = sb_clock_rate(pll, -+ R_REG(osh, &cc->clockcontrol_n), -+ R_REG(osh, &cc->clockcontrol_m2)); -+ div = 1; -+ } else { -+ /* Fixed ALP clock */ -+ if (rev >= 11 && rev != 15) { -+ baud_base = 20000000; -+ div = 1; -+ /* Set the override bit so we don't divide it */ -+ W_REG(osh, &cc->corecontrol, CC_UARTCLKO); -+ } -+ /* Internal backplane clock */ -+ else if (rev >= 3) { -+ baud_base = sb_clock(sbh); -+ div = 2; /* Minimum divisor */ -+ W_REG(osh, &cc->clkdiv, -+ ((R_REG(osh, &cc->clkdiv) & ~CLKD_UART) | div)); -+ } -+ /* Fixed internal backplane clock */ -+ else { -+ baud_base = 88000000; -+ div = 48; -+ } -+ -+ /* Clock source depends on strapping if UartClkOverride is unset */ -+ if ((rev > 0) && -+ ((R_REG(osh, &cc->corecontrol) & CC_UARTCLKO) == 0)) { -+ if ((cap & CAP_UCLKSEL) == CAP_UINTCLK) { -+ /* Internal divided backplane clock */ -+ baud_base /= div; -+ } else { -+ /* Assume external clock of 1.8432 MHz */ -+ baud_base = 1843200; -+ } -+ } -+ } -+ -+ /* Add internal UARTs */ -+ n = cap & CAP_UARTS_MASK; -+ for (i = 0; i < n; i++) { -+ /* Register offset changed after revision 0 */ -+ if (rev) -+ regs = (void *)((ulong) &cc->uart0data + (i * 256)); -+ else -+ regs = (void *)((ulong) &cc->uart0data + (i * 8)); -+ -+ if (add) -+ add(regs, irq, baud_base, 0); -+ } -+ } -+} -+ -diff -urN linux.old/arch/mips/bcm947xx/include/bcm4710.h linux.dev/arch/mips/bcm947xx/include/bcm4710.h ---- linux.old/arch/mips/bcm947xx/include/bcm4710.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/bcm4710.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,91 @@ -+/* -+ * BCM4710 address space map and definitions -+ * Think twice before adding to this file, this is not the kitchen sink -+ * These definitions are not guaranteed for all 47xx chips, only the 4710 -+ * -+ * Copyright 2004, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: bcm4710.h,v 1.3 2004/09/27 07:23:30 tallest Exp $ -+ */ -+ -+#ifndef _bcm4710_h_ -+#define _bcm4710_h_ -+ -+/* Address map */ -+#define BCM4710_SDRAM 0x00000000 /* Physical SDRAM */ -+#define BCM4710_PCI_MEM 0x08000000 /* Host Mode PCI memory access space (64 MB) */ -+#define BCM4710_PCI_CFG 0x0c000000 /* Host Mode PCI configuration space (64 MB) */ -+#define BCM4710_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */ -+#define BCM4710_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ -+#define BCM4710_ENUM 0x18000000 /* Beginning of core enumeration space */ -+ -+/* Core register space */ -+#define BCM4710_REG_SDRAM 0x18000000 /* SDRAM core registers */ -+#define BCM4710_REG_ILINE20 0x18001000 /* InsideLine20 core registers */ -+#define BCM4710_REG_EMAC0 0x18002000 /* Ethernet MAC 0 core registers */ -+#define BCM4710_REG_CODEC 0x18003000 /* Codec core registers */ -+#define BCM4710_REG_USB 0x18004000 /* USB core registers */ -+#define BCM4710_REG_PCI 0x18005000 /* PCI core registers */ -+#define BCM4710_REG_MIPS 0x18006000 /* MIPS core registers */ -+#define BCM4710_REG_EXTIF 0x18007000 /* External Interface core registers */ -+#define BCM4710_REG_EMAC1 0x18008000 /* Ethernet MAC 1 core registers */ -+ -+#define BCM4710_EXTIF 0x1f000000 /* External Interface base address */ -+#define BCM4710_PCMCIA_MEM 0x1f000000 /* External Interface PCMCIA memory access */ -+#define BCM4710_PCMCIA_IO 0x1f100000 /* PCMCIA I/O access */ -+#define BCM4710_PCMCIA_CONF 0x1f200000 /* PCMCIA configuration */ -+#define BCM4710_PROG 0x1f800000 /* Programable interface */ -+#define BCM4710_FLASH 0x1fc00000 /* Flash */ -+ -+#define BCM4710_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ -+ -+#define BCM4710_UART (BCM4710_REG_EXTIF + 0x00000300) -+ -+#define BCM4710_EUART (BCM4710_EXTIF + 0x00800000) -+#define BCM4710_LED (BCM4710_EXTIF + 0x00900000) -+ -+#define SBFLAG_PCI 0 -+#define SBFLAG_ENET0 1 -+#define SBFLAG_ILINE20 2 -+#define SBFLAG_CODEC 3 -+#define SBFLAG_USB 4 -+#define SBFLAG_EXTIF 5 -+#define SBFLAG_ENET1 6 -+ -+#ifdef CONFIG_HWSIM -+#define BCM4710_TRACE(trval) do { *((int *)0xa0000f18) = (trval); } while (0) -+#else -+#define BCM4710_TRACE(trval) -+#endif -+ -+ -+/* BCM94702 CPCI -ExtIF used for LocalBus devs */ -+ -+#define BCM94702_CPCI_RESET_ADDR BCM4710_EXTIF -+#define BCM94702_CPCI_BOARDID_ADDR (BCM4710_EXTIF | 0x4000) -+#define BCM94702_CPCI_DOC_ADDR (BCM4710_EXTIF | 0x6000) -+#define BCM94702_DOC_ADDR BCM94702_CPCI_DOC_ADDR -+#define BCM94702_CPCI_LED_ADDR (BCM4710_EXTIF | 0xc000) -+#define BCM94702_CPCI_NVRAM_ADDR (BCM4710_EXTIF | 0xe000) -+#define BCM94702_CPCI_NVRAM_SIZE 0x1ff0 /* 8K NVRAM : DS1743/STM48txx*/ -+#define BCM94702_CPCI_TOD_REG_BASE (BCM94702_CPCI_NVRAM_ADDR | 0x1ff0) -+ -+#define LED_REG(x) \ -+ (*(volatile unsigned char *) (KSEG1ADDR(BCM94702_CPCI_LED_ADDR) + (x))) -+ -+/* -+ * Reset function implemented in PLD. Read or write should trigger hard reset -+ */ -+#define SYS_HARD_RESET() \ -+ { for (;;) \ -+ *( (volatile unsigned char *)\ -+ KSEG1ADDR(BCM94702_CPCI_RESET_ADDR) ) = 0x80; \ -+ } -+ -+#endif /* _bcm4710_h_ */ -diff -urN linux.old/arch/mips/bcm947xx/include/bcmdefs.h linux.dev/arch/mips/bcm947xx/include/bcmdefs.h ---- linux.old/arch/mips/bcm947xx/include/bcmdefs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/bcmdefs.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,106 @@ -+/* -+ * Misc system wide definitions -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id: bcmdefs.h,v 1.1.1.3 2006/04/08 06:13:39 honor Exp $ -+ */ -+ -+#ifndef _bcmdefs_h_ -+#define _bcmdefs_h_ -+ -+/* -+ * One doesn't need to include this file explicitly, gets included automatically if -+ * typedefs.h is included. -+ */ -+ -+/* Reclaiming text and data : -+ * The following macros specify special linker sections that can be reclaimed -+ * after a system is considered 'up'. -+ */ -+#if defined(__GNUC__) && defined(BCMRECLAIM) -+extern bool bcmreclaimed; -+#define BCMINITDATA(_data) __attribute__ ((__section__ (".dataini." #_data))) _data -+#define BCMINITFN(_fn) __attribute__ ((__section__ (".textini." #_fn))) _fn -+#else /* #if defined(__GNUC__) && defined(BCMRECLAIM) */ -+#define BCMINITDATA(_data) _data -+#define BCMINITFN(_fn) _fn -+#define bcmreclaimed 0 -+#endif /* #if defined(__GNUC__) && defined(BCMRECLAIM) */ -+ -+/* Reclaim uninit functions if BCMNODOWN is defined */ -+/* and if they are not already removed by -gc-sections */ -+#ifdef BCMNODOWN -+#define BCMUNINITFN(_fn) BCMINITFN(_fn) -+#else -+#define BCMUNINITFN(_fn) _fn -+#endif -+ -+#ifdef BCMRECLAIM -+#define CONST -+#else -+#define CONST const -+#endif /* BCMRECLAIM */ -+ -+/* Compatibility with old-style BCMRECLAIM */ -+#define BCMINIT(_id) _id -+ -+ -+/* Put some library data/code into ROM to reduce RAM requirements */ -+#if defined(__GNUC__) && defined(BCMROMOFFLOAD) -+#define BCMROMDATA(_data) __attribute__ ((__section__ (".datarom." #_data))) _data -+#define BCMROMFN(_fn) __attribute__ ((__section__ (".textrom." #_fn))) _fn -+#else -+#define BCMROMDATA(_data) _data -+#define BCMROMFN(_fn) _fn -+#endif -+ -+/* Bus types */ -+#define SB_BUS 0 /* Silicon Backplane */ -+#define PCI_BUS 1 /* PCI target */ -+#define PCMCIA_BUS 2 /* PCMCIA target */ -+#define SDIO_BUS 3 /* SDIO target */ -+#define JTAG_BUS 4 /* JTAG */ -+#define NO_BUS 0xFF /* Bus that does not support R/W REG */ -+ -+/* Allows optimization for single-bus support */ -+#ifdef BCMBUSTYPE -+#define BUSTYPE(bus) (BCMBUSTYPE) -+#else -+#define BUSTYPE(bus) (bus) -+#endif -+ -+/* Defines for DMA Address Width - Shared between OSL and HNDDMA */ -+#define DMADDR_MASK_32 0x0 /* Address mask for 32-bits */ -+#define DMADDR_MASK_30 0xc0000000 /* Address mask for 30-bits */ -+#define DMADDR_MASK_0 0xffffffff /* Address mask for 0-bits (hi-part) */ -+ -+#define DMADDRWIDTH_30 30 /* 30-bit addressing capability */ -+#define DMADDRWIDTH_32 32 /* 32-bit addressing capability */ -+#define DMADDRWIDTH_63 63 /* 64-bit addressing capability */ -+#define DMADDRWIDTH_64 64 /* 64-bit addressing capability */ -+ -+/* packet headroom necessary to accomodate the largest header in the system, (i.e TXOFF). -+ * By doing, we avoid the need to allocate an extra buffer for the header when bridging to WL. -+ * There is a compile time check in wlc.c which ensure that this value is at least as big -+ * as TXOFF. This value is used in dma_rxfill (hnddma.c). -+ */ -+#define BCMEXTRAHDROOM 160 -+ -+/* Headroom required for dongle-to-host communication. Packets allocated -+ * locally in the dongle (e.g. for CDC ioctls or RNDIS messages) should -+ * leave this much room in front for low-level message headers which may -+ * be needed to get across the dongle bus to the host. (These messages -+ * don't go over the network, so room for the full WL header above would -+ * be a waste.) -+ */ -+#define BCMDONGLEHDRSZ 8 -+ -+ -+ -+#endif /* _bcmdefs_h_ */ -diff -urN linux.old/arch/mips/bcm947xx/include/bcmdevs1.h linux.dev/arch/mips/bcm947xx/include/bcmdevs1.h ---- linux.old/arch/mips/bcm947xx/include/bcmdevs1.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/bcmdevs1.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,391 @@ -+/* -+ * Broadcom device-specific manifest constants. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ -+ */ -+ -+#ifndef _BCMDEVS_H -+#define _BCMDEVS_H -+ -+ -+/* Known PCI vendor Id's */ -+#define VENDOR_EPIGRAM 0xfeda -+#define VENDOR_BROADCOM 0x14e4 -+#define VENDOR_3COM 0x10b7 -+#define VENDOR_NETGEAR 0x1385 -+#define VENDOR_DIAMOND 0x1092 -+#define VENDOR_DELL 0x1028 -+#define VENDOR_HP 0x0e11 -+#define VENDOR_APPLE 0x106b -+ -+/* PCI Device Id's */ -+#define BCM4210_DEVICE_ID 0x1072 /* never used */ -+#define BCM4211_DEVICE_ID 0x4211 -+#define BCM4230_DEVICE_ID 0x1086 /* never used */ -+#define BCM4231_DEVICE_ID 0x4231 -+ -+#define BCM4410_DEVICE_ID 0x4410 /* bcm44xx family pci iline */ -+#define BCM4430_DEVICE_ID 0x4430 /* bcm44xx family cardbus iline */ -+#define BCM4412_DEVICE_ID 0x4412 /* bcm44xx family pci enet */ -+#define BCM4432_DEVICE_ID 0x4432 /* bcm44xx family cardbus enet */ -+ -+#define BCM3352_DEVICE_ID 0x3352 /* bcm3352 device id */ -+#define BCM3360_DEVICE_ID 0x3360 /* bcm3360 device id */ -+ -+#define EPI41210_DEVICE_ID 0xa0fa /* bcm4210 */ -+#define EPI41230_DEVICE_ID 0xa10e /* bcm4230 */ -+ -+#define BCM47XX_ILINE_ID 0x4711 /* 47xx iline20 */ -+#define BCM47XX_V90_ID 0x4712 /* 47xx v90 codec */ -+#define BCM47XX_ENET_ID 0x4713 /* 47xx enet */ -+#define BCM47XX_EXT_ID 0x4714 /* 47xx external i/f */ -+#define BCM47XX_USB_ID 0x4715 /* 47xx usb */ -+#define BCM47XX_USBH_ID 0x4716 /* 47xx usb host */ -+#define BCM47XX_USBD_ID 0x4717 /* 47xx usb device */ -+#define BCM47XX_IPSEC_ID 0x4718 /* 47xx ipsec */ -+#define BCM47XX_ROBO_ID 0x4719 /* 47xx/53xx roboswitch core */ -+#define BCM47XX_USB20H_ID 0x471a /* 47xx usb 2.0 host */ -+#define BCM47XX_USB20D_ID 0x471b /* 47xx usb 2.0 device */ -+ -+#define BCM4710_DEVICE_ID 0x4710 /* 4710 primary function 0 */ -+ -+#define BCM4610_DEVICE_ID 0x4610 /* 4610 primary function 0 */ -+#define BCM4610_ILINE_ID 0x4611 /* 4610 iline100 */ -+#define BCM4610_V90_ID 0x4612 /* 4610 v90 codec */ -+#define BCM4610_ENET_ID 0x4613 /* 4610 enet */ -+#define BCM4610_EXT_ID 0x4614 /* 4610 external i/f */ -+#define BCM4610_USB_ID 0x4615 /* 4610 usb */ -+ -+#define BCM4402_DEVICE_ID 0x4402 /* 4402 primary function 0 */ -+#define BCM4402_ENET_ID 0x4402 /* 4402 enet */ -+#define BCM4402_V90_ID 0x4403 /* 4402 v90 codec */ -+#define BCM4401_ENET_ID 0x170c /* 4401b0 production enet cards */ -+ -+#define BCM4301_DEVICE_ID 0x4301 /* 4301 primary function 0 */ -+#define BCM4301_D11B_ID 0x4301 /* 4301 802.11b */ -+ -+#define BCM4307_DEVICE_ID 0x4307 /* 4307 primary function 0 */ -+#define BCM4307_V90_ID 0x4305 /* 4307 v90 codec */ -+#define BCM4307_ENET_ID 0x4306 /* 4307 enet */ -+#define BCM4307_D11B_ID 0x4307 /* 4307 802.11b */ -+ -+#define BCM4306_DEVICE_ID 0x4306 /* 4306 chipcommon chipid */ -+#define BCM4306_D11G_ID 0x4320 /* 4306 802.11g */ -+#define BCM4306_D11G_ID2 0x4325 -+#define BCM4306_D11A_ID 0x4321 /* 4306 802.11a */ -+#define BCM4306_UART_ID 0x4322 /* 4306 uart */ -+#define BCM4306_V90_ID 0x4323 /* 4306 v90 codec */ -+#define BCM4306_D11DUAL_ID 0x4324 /* 4306 dual A+B */ -+ -+#define BCM4309_PKG_ID 1 /* 4309 package id */ -+ -+#define BCM4303_D11B_ID 0x4303 /* 4303 802.11b */ -+#define BCM4303_PKG_ID 2 /* 4303 package id */ -+ -+#define BCM4310_DEVICE_ID 0x4310 /* 4310 chipcommon chipid */ -+#define BCM4310_D11B_ID 0x4311 /* 4310 802.11b */ -+#define BCM4310_UART_ID 0x4312 /* 4310 uart */ -+#define BCM4310_ENET_ID 0x4313 /* 4310 enet */ -+#define BCM4310_USB_ID 0x4315 /* 4310 usb */ -+ -+#define BCMGPRS_UART_ID 0x4333 /* Uart id used by 4306/gprs card */ -+#define BCMGPRS2_UART_ID 0x4344 /* Uart id used by 4306/gprs card */ -+ -+ -+#define BCM4704_DEVICE_ID 0x4704 /* 4704 chipcommon chipid */ -+#define BCM4704_ENET_ID 0x4706 /* 4704 enet (Use 47XX_ENET_ID instead!) */ -+ -+#define BCM4317_DEVICE_ID 0x4317 /* 4317 chip common chipid */ -+ -+#define BCM4318_DEVICE_ID 0x4318 /* 4318 chip common chipid */ -+#define BCM4318_D11G_ID 0x4318 /* 4318 801.11b/g id */ -+#define BCM4318_D11DUAL_ID 0x4319 /* 4318 801.11a/b/g id */ -+#define BCM4318_JTAGM_ID 0x4331 /* 4318 jtagm device id */ -+ -+#define FPGA_JTAGM_ID 0x4330 /* ??? */ -+ -+/* Address map */ -+#define BCM4710_SDRAM 0x00000000 /* Physical SDRAM */ -+#define BCM4710_PCI_MEM 0x08000000 /* Host Mode PCI memory access space (64 MB) */ -+#define BCM4710_PCI_CFG 0x0c000000 /* Host Mode PCI configuration space (64 MB) */ -+#define BCM4710_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */ -+#define BCM4710_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ -+#define BCM4710_ENUM 0x18000000 /* Beginning of core enumeration space */ -+ -+/* Core register space */ -+#define BCM4710_REG_SDRAM 0x18000000 /* SDRAM core registers */ -+#define BCM4710_REG_ILINE20 0x18001000 /* InsideLine20 core registers */ -+#define BCM4710_REG_EMAC0 0x18002000 /* Ethernet MAC 0 core registers */ -+#define BCM4710_REG_CODEC 0x18003000 /* Codec core registers */ -+#define BCM4710_REG_USB 0x18004000 /* USB core registers */ -+#define BCM4710_REG_PCI 0x18005000 /* PCI core registers */ -+#define BCM4710_REG_MIPS 0x18006000 /* MIPS core registers */ -+#define BCM4710_REG_EXTIF 0x18007000 /* External Interface core registers */ -+#define BCM4710_REG_EMAC1 0x18008000 /* Ethernet MAC 1 core registers */ -+ -+#define BCM4710_EXTIF 0x1f000000 /* External Interface base address */ -+#define BCM4710_PCMCIA_MEM 0x1f000000 /* External Interface PCMCIA memory access */ -+#define BCM4710_PCMCIA_IO 0x1f100000 /* PCMCIA I/O access */ -+#define BCM4710_PCMCIA_CONF 0x1f200000 /* PCMCIA configuration */ -+#define BCM4710_PROG 0x1f800000 /* Programable interface */ -+#define BCM4710_FLASH 0x1fc00000 /* Flash */ -+ -+#define BCM4710_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ -+ -+#define BCM4710_UART (BCM4710_REG_EXTIF + 0x00000300) -+ -+#define BCM4710_EUART (BCM4710_EXTIF + 0x00800000) -+#define BCM4710_LED (BCM4710_EXTIF + 0x00900000) -+ -+#define BCM4712_DEVICE_ID 0x4712 /* 4712 chipcommon chipid */ -+#define BCM4712_MIPS_ID 0x4720 /* 4712 base devid */ -+#define BCM4712LARGE_PKG_ID 0 /* 340pin 4712 package id */ -+#define BCM4712SMALL_PKG_ID 1 /* 200pin 4712 package id */ -+#define BCM4712MID_PKG_ID 2 /* 225pin 4712 package id */ -+ -+#define SDIOH_FPGA_ID 0x4380 /* sdio host fpga */ -+ -+#define BCM5365_DEVICE_ID 0x5365 /* 5365 chipcommon chipid */ -+#define BCM5350_DEVICE_ID 0x5350 /* bcm5350 chipcommon chipid */ -+#define BCM5352_DEVICE_ID 0x5352 /* bcm5352 chipcommon chipid */ -+ -+#define BCM4320_DEVICE_ID 0x4320 /* bcm4320 chipcommon chipid */ -+ -+/* PCMCIA vendor Id's */ -+ -+#define VENDOR_BROADCOM_PCMCIA 0x02d0 -+ -+/* SDIO vendor Id's */ -+#define VENDOR_BROADCOM_SDIO 0x00BF -+ -+ -+/* boardflags */ -+#define BFL_BTCOEXIST 0x0001 /* This board implements Bluetooth coexistance */ -+#define BFL_PACTRL 0x0002 /* This board has gpio 9 controlling the PA */ -+#define BFL_AIRLINEMODE 0x0004 /* This board implements gpio13 radio disable indication */ -+#define BFL_ENETROBO 0x0010 /* This board has robo switch or core */ -+#define BFL_CCKHIPWR 0x0040 /* Can do high-power CCK transmission */ -+#define BFL_ENETADM 0x0080 /* This board has ADMtek switch */ -+#define BFL_ENETVLAN 0x0100 /* This board has vlan capability */ -+#define BFL_AFTERBURNER 0x0200 /* This board supports Afterburner mode */ -+#define BFL_NOPCI 0x0400 /* This board leaves PCI floating */ -+#define BFL_FEM 0x0800 /* This board supports the Front End Module */ -+#define BFL_EXTLNA 0x1000 /* This board has an external LNA */ -+#define BFL_HGPA 0x2000 /* This board has a high gain PA */ -+#define BFL_BTCMOD 0x4000 /* This board' BTCOEXIST is in the alternate gpios */ -+#define BFL_ALTIQ 0x8000 /* Alternate I/Q settings */ -+ -+/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */ -+#define BOARD_GPIO_HWRAD_B 0x010 /* bit 4 is HWRAD input on 4301 */ -+#define BOARD_GPIO_BTCMOD_IN 0x010 /* bit 4 is the alternate BT Coexistance Input */ -+#define BOARD_GPIO_BTCMOD_OUT 0x020 /* bit 5 is the alternate BT Coexistance Out */ -+#define BOARD_GPIO_BTC_IN 0x080 /* bit 7 is BT Coexistance Input */ -+#define BOARD_GPIO_BTC_OUT 0x100 /* bit 8 is BT Coexistance Out */ -+#define BOARD_GPIO_PACTRL 0x200 /* bit 9 controls the PA on new 4306 boards */ -+#define PCI_CFG_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */ -+#define PCI_CFG_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */ -+#define PCI_CFG_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ -+#define PCI_CFG_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ -+ -+/* Bus types */ -+#define SB_BUS 0 /* Silicon Backplane */ -+#define PCI_BUS 1 /* PCI target */ -+#define PCMCIA_BUS 2 /* PCMCIA target */ -+#define SDIO_BUS 3 /* SDIO target */ -+#define JTAG_BUS 4 /* JTAG */ -+ -+/* Allows optimization for single-bus support */ -+#ifdef BCMBUSTYPE -+#define BUSTYPE(bus) (BCMBUSTYPE) -+#else -+#define BUSTYPE(bus) (bus) -+#endif -+ -+/* power control defines */ -+#define PLL_DELAY 150 /* us pll on delay */ -+#define FREF_DELAY 200 /* us fref change delay */ -+#define MIN_SLOW_CLK 32 /* us Slow clock period */ -+#define XTAL_ON_DELAY 1000 /* us crystal power-on delay */ -+ -+/* Reference Board Types */ -+ -+#define BU4710_BOARD 0x0400 -+#define VSIM4710_BOARD 0x0401 -+#define QT4710_BOARD 0x0402 -+ -+#define BU4610_BOARD 0x0403 -+#define VSIM4610_BOARD 0x0404 -+ -+#define BU4307_BOARD 0x0405 -+#define BCM94301CB_BOARD 0x0406 -+#define BCM94301PC_BOARD 0x0406 /* Pcmcia 5v card */ -+#define BCM94301MP_BOARD 0x0407 -+#define BCM94307MP_BOARD 0x0408 -+#define BCMAP4307_BOARD 0x0409 -+ -+#define BU4309_BOARD 0x040a -+#define BCM94309CB_BOARD 0x040b -+#define BCM94309MP_BOARD 0x040c -+#define BCM4309AP_BOARD 0x040d -+ -+#define BCM94302MP_BOARD 0x040e -+ -+#define VSIM4310_BOARD 0x040f -+#define BU4711_BOARD 0x0410 -+#define BCM94310U_BOARD 0x0411 -+#define BCM94310AP_BOARD 0x0412 -+#define BCM94310MP_BOARD 0x0414 -+ -+#define BU4306_BOARD 0x0416 -+#define BCM94306CB_BOARD 0x0417 -+#define BCM94306MP_BOARD 0x0418 -+ -+#define BCM94710D_BOARD 0x041a -+#define BCM94710R1_BOARD 0x041b -+#define BCM94710R4_BOARD 0x041c -+#define BCM94710AP_BOARD 0x041d -+ -+ -+#define BU2050_BOARD 0x041f -+ -+ -+#define BCM94309G_BOARD 0x0421 -+ -+#define BCM94301PC3_BOARD 0x0422 /* Pcmcia 3.3v card */ -+ -+#define BU4704_BOARD 0x0423 -+#define BU4702_BOARD 0x0424 -+ -+#define BCM94306PC_BOARD 0x0425 /* pcmcia 3.3v 4306 card */ -+ -+#define BU4317_BOARD 0x0426 -+ -+ -+#define BCM94702MN_BOARD 0x0428 -+ -+/* BCM4702 1U CompactPCI Board */ -+#define BCM94702CPCI_BOARD 0x0429 -+ -+/* BCM4702 with BCM95380 VLAN Router */ -+#define BCM95380RR_BOARD 0x042a -+ -+/* cb4306 with SiGe PA */ -+#define BCM94306CBSG_BOARD 0x042b -+ -+/* mp4301 with 2050 radio */ -+#define BCM94301MPL_BOARD 0x042c -+ -+/* cb4306 with SiGe PA */ -+#define PCSG94306_BOARD 0x042d -+ -+/* bu4704 with sdram */ -+#define BU4704SD_BOARD 0x042e -+ -+/* Dual 11a/11g Router */ -+#define BCM94704AGR_BOARD 0x042f -+ -+/* 11a-only minipci */ -+#define BCM94308MP_BOARD 0x0430 -+ -+ -+ -+/* BCM94317 boards */ -+#define BCM94317CB_BOARD 0x0440 -+#define BCM94317MP_BOARD 0x0441 -+#define BCM94317PCMCIA_BOARD 0x0442 -+#define BCM94317SDIO_BOARD 0x0443 -+ -+#define BU4712_BOARD 0x0444 -+#define BU4712SD_BOARD 0x045d -+#define BU4712L_BOARD 0x045f -+ -+/* BCM4712 boards */ -+#define BCM94712AP_BOARD 0x0445 -+#define BCM94712P_BOARD 0x0446 -+ -+/* BCM4318 boards */ -+#define BU4318_BOARD 0x0447 -+#define CB4318_BOARD 0x0448 -+#define MPG4318_BOARD 0x0449 -+#define MP4318_BOARD 0x044a -+#define SD4318_BOARD 0x044b -+ -+/* BCM63XX boards */ -+#define BCM96338_BOARD 0x6338 -+#define BCM96345_BOARD 0x6345 -+#define BCM96348_BOARD 0x6348 -+ -+/* Another mp4306 with SiGe */ -+#define BCM94306P_BOARD 0x044c -+ -+/* CF-like 4317 modules */ -+#define BCM94317CF_BOARD 0x044d -+ -+/* mp4303 */ -+#define BCM94303MP_BOARD 0x044e -+ -+/* mpsgh4306 */ -+#define BCM94306MPSGH_BOARD 0x044f -+ -+/* BRCM 4306 w/ Front End Modules */ -+#define BCM94306MPM 0x0450 -+#define BCM94306MPL 0x0453 -+ -+/* 4712agr */ -+#define BCM94712AGR_BOARD 0x0451 -+ -+/* The real CF 4317 board */ -+#define CFI4317_BOARD 0x0452 -+ -+/* pcmcia 4303 */ -+#define PC4303_BOARD 0x0454 -+ -+/* 5350K */ -+#define BCM95350K_BOARD 0x0455 -+ -+/* 5350R */ -+#define BCM95350R_BOARD 0x0456 -+ -+/* 4306mplna */ -+#define BCM94306MPLNA_BOARD 0x0457 -+ -+/* 4320 boards */ -+#define BU4320_BOARD 0x0458 -+#define BU4320S_BOARD 0x0459 -+#define BCM94320PH_BOARD 0x045a -+ -+/* 4306mph */ -+#define BCM94306MPH_BOARD 0x045b -+ -+/* 4306pciv */ -+#define BCM94306PCIV_BOARD 0x045c -+ -+#define BU4712SD_BOARD 0x045d -+ -+#define BCM94320PFLSH_BOARD 0x045e -+ -+#define BU4712L_BOARD 0x045f -+#define BCM94712LGR_BOARD 0x0460 -+#define BCM94320R_BOARD 0x0461 -+ -+#define BU5352_BOARD 0x0462 -+ -+#define BCM94318MPGH_BOARD 0x0463 -+ -+ -+#define BCM95352GR_BOARD 0x0467 -+ -+/* bcm95351agr */ -+#define BCM95351AGR_BOARD 0x0470 -+ -+/* # of GPIO pins */ -+#define GPIO_NUMPINS 16 -+ -+#endif /* _BCMDEVS_H */ -diff -urN linux.old/arch/mips/bcm947xx/include/bcmdevs.h linux.dev/arch/mips/bcm947xx/include/bcmdevs.h ---- linux.old/arch/mips/bcm947xx/include/bcmdevs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/bcmdevs.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,369 @@ -+/* -+ * Broadcom device-specific manifest constants. -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id: bcmdevs.h,v 1.1.1.17 2006/04/15 01:29:08 michael Exp $ -+ */ -+ -+#ifndef _BCMDEVS_H -+#define _BCMDEVS_H -+ -+#include "bcm4710.h" -+ -+/* Known PCI vendor Id's */ -+#define VENDOR_EPIGRAM 0xfeda -+#define VENDOR_BROADCOM 0x14e4 -+#define VENDOR_3COM 0x10b7 -+#define VENDOR_NETGEAR 0x1385 -+#define VENDOR_DIAMOND 0x1092 -+#define VENDOR_DELL 0x1028 -+#define VENDOR_HP 0x0e11 -+#define VENDOR_APPLE 0x106b -+ -+/* PCI Device Id's */ -+#define BCM4210_DEVICE_ID 0x1072 /* never used */ -+#define BCM4211_DEVICE_ID 0x4211 -+#define BCM4230_DEVICE_ID 0x1086 /* never used */ -+#define BCM4231_DEVICE_ID 0x4231 -+ -+#define BCM4410_DEVICE_ID 0x4410 /* bcm44xx family pci iline */ -+#define BCM4430_DEVICE_ID 0x4430 /* bcm44xx family cardbus iline */ -+#define BCM4412_DEVICE_ID 0x4412 /* bcm44xx family pci enet */ -+#define BCM4432_DEVICE_ID 0x4432 /* bcm44xx family cardbus enet */ -+ -+#define BCM3352_DEVICE_ID 0x3352 /* bcm3352 device id */ -+#define BCM3360_DEVICE_ID 0x3360 /* bcm3360 device id */ -+ -+#define EPI41210_DEVICE_ID 0xa0fa /* bcm4210 */ -+#define EPI41230_DEVICE_ID 0xa10e /* bcm4230 */ -+ -+#define BCM47XX_ILINE_ID 0x4711 /* 47xx iline20 */ -+#define BCM47XX_V90_ID 0x4712 /* 47xx v90 codec */ -+#define BCM47XX_ENET_ID 0x4713 /* 47xx enet */ -+#define BCM47XX_EXT_ID 0x4714 /* 47xx external i/f */ -+#define BCM47XX_USB_ID 0x4715 /* 47xx usb */ -+#define BCM47XX_USBH_ID 0x4716 /* 47xx usb host */ -+#define BCM47XX_USBD_ID 0x4717 /* 47xx usb device */ -+#define BCM47XX_IPSEC_ID 0x4718 /* 47xx ipsec */ -+#define BCM47XX_ROBO_ID 0x4719 /* 47xx/53xx roboswitch core */ -+#define BCM47XX_USB20H_ID 0x471a /* 47xx usb 2.0 host */ -+#define BCM47XX_USB20D_ID 0x471b /* 47xx usb 2.0 device */ -+#define BCM47XX_ATA100_ID 0x471d /* 47xx parallel ATA */ -+#define BCM47XX_SATAXOR_ID 0x471e /* 47xx serial ATA & XOR DMA */ -+#define BCM47XX_GIGETH_ID 0x471f /* 47xx GbE (5700) */ -+ -+#define BCM47XX_SMBUS_EMU_ID 0x47fe /* 47xx emulated SMBus device */ -+#define BCM47XX_XOR_EMU_ID 0x47ff /* 47xx emulated XOR engine */ -+ -+#define BCM4710_CHIP_ID 0x4710 /* 4710 chipid returned by sb_chip() */ -+#define BCM4710_DEVICE_ID 0x4710 /* 4710 primary function 0 */ -+ -+#define BCM4402_CHIP_ID 0x4402 /* 4402 chipid */ -+#define BCM4402_ENET_ID 0x4402 /* 4402 enet */ -+#define BCM4402_V90_ID 0x4403 /* 4402 v90 codec */ -+#define BCM4401_ENET_ID 0x170c /* 4401b0 production enet cards */ -+ -+#define BCM4306_CHIP_ID 0x4306 /* 4306 chipcommon chipid */ -+#define BCM4306_D11G_ID 0x4320 /* 4306 802.11g */ -+#define BCM4306_D11G_ID2 0x4325 -+#define BCM4306_D11A_ID 0x4321 /* 4306 802.11a */ -+#define BCM4306_UART_ID 0x4322 /* 4306 uart */ -+#define BCM4306_V90_ID 0x4323 /* 4306 v90 codec */ -+#define BCM4306_D11DUAL_ID 0x4324 /* 4306 dual A+B */ -+ -+#define BCM4309_PKG_ID 1 /* 4309 package id */ -+ -+#define BCM4311_CHIP_ID 0x4311 /* 4311 PCIe 802.11a/b/g */ -+#define BCM4311_D11G_ID 0x4311 /* 4311 802.11b/g id */ -+#define BCM4311_D11DUAL_ID 0x4312 /* 4311 802.11a/b/g id */ -+#define BCM4311_D11A_ID 0x4313 /* 4311 802.11a id */ -+ -+#define BCM4303_D11B_ID 0x4303 /* 4303 802.11b */ -+#define BCM4303_PKG_ID 2 /* 4303 package id */ -+ -+#define BCMGPRS_UART_ID 0x4333 /* Uart id used by 4306/gprs card */ -+#define BCMGPRS2_UART_ID 0x4344 /* Uart id used by 4306/gprs card */ -+ -+#define BCM4704_CHIP_ID 0x4704 /* 4704 chipcommon chipid */ -+#define BCM4704_ENET_ID 0x4706 /* 4704 enet (Use 47XX_ENET_ID instead!) */ -+ -+#define BCM4318_CHIP_ID 0x4318 /* 4318 chip common chipid */ -+#define BCM4318_D11G_ID 0x4318 /* 4318 802.11b/g id */ -+#define BCM4318_D11DUAL_ID 0x4319 /* 4318 802.11a/b/g id */ -+#define BCM4318_D11A_ID 0x431a /* 4318 802.11a id */ -+ -+#define BCM4321_CHIP_ID 0x4321 /* 4321 chip common chipid */ -+#define BCM4321_D11N_ID 0x4328 /* 4321 802.11n dualband id */ -+#define BCM4321_D11N2G_ID 0x4329 /* 4321 802.11n 2.4Hgz band id */ -+#define BCM4321_D11N5G_ID 0x432a /* 4321 802.11n 5Ghz band id */ -+ -+#define BCM4331_CHIP_ID 0x4331 /* 4331 chip common chipid */ -+#define BCM4331_D11N2G_ID 0x4330 /* 4331 802.11n 2.4Ghz band id */ -+#define BCM4331_D11N_ID 0x4331 /* 4331 802.11n dualband id */ -+#define BCM4331_D11N5G_ID 0x4332 /* 4331 802.11n 5Ghz band id */ -+ -+#define HDLSIM5350_PKG_ID 1 /* HDL simulator package id for a 5350 */ -+#define HDLSIM_PKG_ID 14 /* HDL simulator package id */ -+#define HWSIM_PKG_ID 15 /* Hardware simulator package id */ -+ -+#define BCM4712_CHIP_ID 0x4712 /* 4712 chipcommon chipid */ -+#define BCM4712_MIPS_ID 0x4720 /* 4712 base devid */ -+#define BCM4712LARGE_PKG_ID 0 /* 340pin 4712 package id */ -+#define BCM4712SMALL_PKG_ID 1 /* 200pin 4712 package id */ -+#define BCM4712MID_PKG_ID 2 /* 225pin 4712 package id */ -+ -+#define BCM5365_CHIP_ID 0x5365 /* 5365 chipcommon chipid */ -+#define BCM5350_CHIP_ID 0x5350 /* bcm5350 chipcommon chipid */ -+#define BCM5352_CHIP_ID 0x5352 /* bcm5352 chipcommon chipid */ -+ -+#define BCM4320_CHIP_ID 0x4320 /* bcm4320 chipcommon chipid */ -+ -+#define BCM4328_CHIP_ID 0x4328 /* bcm4328 chipcommon chipid */ -+ -+#define FPGA_JTAGM_ID 0x43f0 /* FPGA jtagm device id */ -+#define BCM43XX_JTAGM_ID 0x43f1 /* 43xx jtagm device id */ -+#define BCM43XXOLD_JTAGM_ID 0x4331 /* 43xx old jtagm device id */ -+ -+#define SDIOH_FPGA_ID 0x43f2 /* sdio host fpga */ -+#define SDIOD_FPGA_ID 0x43f4 /* sdio device fpga */ -+ -+#define MIMO_FPGA_ID 0x43f8 /* FPGA mimo minimacphy device id */ -+ -+#define BCM4785_CHIP_ID 0x4785 /* 4785 chipcommon chipid */ -+ -+/* PCMCIA vendor Id's */ -+ -+#define VENDOR_BROADCOM_PCMCIA 0x02d0 -+ -+/* SDIO vendor Id's */ -+#define VENDOR_BROADCOM_SDIO 0x00BF -+ -+ -+/* boardflags */ -+#define BFL_BTCOEXIST 0x0001 /* This board implements Bluetooth coexistance */ -+#define BFL_PACTRL 0x0002 /* This board has gpio 9 controlling the PA */ -+#define BFL_AIRLINEMODE 0x0004 /* This board implements gpio13 radio disable indication */ -+#define BFL_ENETROBO 0x0010 /* This board has robo switch or core */ -+#define BFL_CCKHIPWR 0x0040 /* Can do high-power CCK transmission */ -+#define BFL_ENETADM 0x0080 /* This board has ADMtek switch */ -+#define BFL_ENETVLAN 0x0100 /* This board has vlan capability */ -+#define BFL_AFTERBURNER 0x0200 /* This board supports Afterburner mode */ -+#define BFL_NOPCI 0x0400 /* This board leaves PCI floating */ -+#define BFL_FEM 0x0800 /* This board supports the Front End Module */ -+#define BFL_EXTLNA 0x1000 /* This board has an external LNA */ -+#define BFL_HGPA 0x2000 /* This board has a high gain PA */ -+#define BFL_BTCMOD 0x4000 /* This board' BTCOEXIST is in the alternate gpios */ -+#define BFL_ALTIQ 0x8000 /* Alternate I/Q settings */ -+ -+/* boardflags2 */ -+#define BFL2_RXBB_INT_REG_DIS 0x00000001 /* This board has an external rxbb regulator */ -+#define BFL2_SSWITCH_AVAIL 0x00000002 /* This board has a superswitch for > 2 antennas */ -+#define BFL2_TXPWRCTRL_EN 0x00000004 /* This board permits TX Power Control to be enabled */ -+ -+/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */ -+#define BOARD_GPIO_BTCMOD_IN 0x010 /* bit 4 is the alternate BT Coexistance Input */ -+#define BOARD_GPIO_BTCMOD_OUT 0x020 /* bit 5 is the alternate BT Coexistance Out */ -+#define BOARD_GPIO_BTC_IN 0x080 /* bit 7 is BT Coexistance Input */ -+#define BOARD_GPIO_BTC_OUT 0x100 /* bit 8 is BT Coexistance Out */ -+#define BOARD_GPIO_PACTRL 0x200 /* bit 9 controls the PA on new 4306 boards */ -+#define PCI_CFG_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */ -+#define PCI_CFG_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */ -+#define PCI_CFG_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ -+#define PCI_CFG_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ -+ -+/* power control defines */ -+#define PLL_DELAY 150 /* us pll on delay */ -+#define FREF_DELAY 200 /* us fref change delay */ -+#define MIN_SLOW_CLK 32 /* us Slow clock period */ -+#define XTAL_ON_DELAY 1000 /* us crystal power-on delay */ -+ -+/* Reference Board Types */ -+ -+#define BU4710_BOARD 0x0400 -+#define VSIM4710_BOARD 0x0401 -+#define QT4710_BOARD 0x0402 -+ -+#define BU4309_BOARD 0x040a -+#define BCM94309CB_BOARD 0x040b -+#define BCM94309MP_BOARD 0x040c -+#define BCM4309AP_BOARD 0x040d -+ -+#define BCM94302MP_BOARD 0x040e -+ -+#define BU4306_BOARD 0x0416 -+#define BCM94306CB_BOARD 0x0417 -+#define BCM94306MP_BOARD 0x0418 -+ -+#define BCM94710D_BOARD 0x041a -+#define BCM94710R1_BOARD 0x041b -+#define BCM94710R4_BOARD 0x041c -+#define BCM94710AP_BOARD 0x041d -+ -+#define BU2050_BOARD 0x041f -+ -+ -+#define BCM94309G_BOARD 0x0421 -+ -+#define BU4704_BOARD 0x0423 -+#define BU4702_BOARD 0x0424 -+ -+#define BCM94306PC_BOARD 0x0425 /* pcmcia 3.3v 4306 card */ -+ -+ -+#define BCM94702MN_BOARD 0x0428 -+ -+/* BCM4702 1U CompactPCI Board */ -+#define BCM94702CPCI_BOARD 0x0429 -+ -+/* BCM4702 with BCM95380 VLAN Router */ -+#define BCM95380RR_BOARD 0x042a -+ -+/* cb4306 with SiGe PA */ -+#define BCM94306CBSG_BOARD 0x042b -+ -+/* cb4306 with SiGe PA */ -+#define PCSG94306_BOARD 0x042d -+ -+/* bu4704 with sdram */ -+#define BU4704SD_BOARD 0x042e -+ -+/* Dual 11a/11g Router */ -+#define BCM94704AGR_BOARD 0x042f -+ -+/* 11a-only minipci */ -+#define BCM94308MP_BOARD 0x0430 -+ -+ -+ -+#define BU4712_BOARD 0x0444 -+#define BU4712SD_BOARD 0x045d -+#define BU4712L_BOARD 0x045f -+ -+/* BCM4712 boards */ -+#define BCM94712AP_BOARD 0x0445 -+#define BCM94712P_BOARD 0x0446 -+ -+/* BCM4318 boards */ -+#define BU4318_BOARD 0x0447 -+#define CB4318_BOARD 0x0448 -+#define MPG4318_BOARD 0x0449 -+#define MP4318_BOARD 0x044a -+#define SD4318_BOARD 0x044b -+ -+/* BCM63XX boards */ -+#define BCM96338_BOARD 0x6338 -+#define BCM96348_BOARD 0x6348 -+ -+/* Another mp4306 with SiGe */ -+#define BCM94306P_BOARD 0x044c -+ -+/* mp4303 */ -+#define BCM94303MP_BOARD 0x044e -+ -+/* mpsgh4306 */ -+#define BCM94306MPSGH_BOARD 0x044f -+ -+/* BRCM 4306 w/ Front End Modules */ -+#define BCM94306MPM 0x0450 -+#define BCM94306MPL 0x0453 -+ -+/* 4712agr */ -+#define BCM94712AGR_BOARD 0x0451 -+ -+/* pcmcia 4303 */ -+#define PC4303_BOARD 0x0454 -+ -+/* 5350K */ -+#define BCM95350K_BOARD 0x0455 -+ -+/* 5350R */ -+#define BCM95350R_BOARD 0x0456 -+ -+/* 4306mplna */ -+#define BCM94306MPLNA_BOARD 0x0457 -+ -+/* 4320 boards */ -+#define BU4320_BOARD 0x0458 -+#define BU4320S_BOARD 0x0459 -+#define BCM94320PH_BOARD 0x045a -+ -+/* 4306mph */ -+#define BCM94306MPH_BOARD 0x045b -+ -+/* 4306pciv */ -+#define BCM94306PCIV_BOARD 0x045c -+ -+#define BU4712SD_BOARD 0x045d -+ -+#define BCM94320PFLSH_BOARD 0x045e -+ -+#define BU4712L_BOARD 0x045f -+#define BCM94712LGR_BOARD 0x0460 -+#define BCM94320R_BOARD 0x0461 -+ -+#define BU5352_BOARD 0x0462 -+ -+#define BCM94318MPGH_BOARD 0x0463 -+ -+#define BU4311_BOARD 0x0464 -+#define BCM94311MC_BOARD 0x0465 -+#define BCM94311MCAG_BOARD 0x0466 -+ -+#define BCM95352GR_BOARD 0x0467 -+ -+/* bcm95351agr */ -+#define BCM95351AGR_BOARD 0x0470 -+ -+/* bcm94704mpcb */ -+#define BCM94704MPCB_BOARD 0x0472 -+ -+/* 4785 boards */ -+#define BU4785_BOARD 0x0478 -+ -+/* 4321 boards */ -+#define BU4321_BOARD 0x046b -+#define BU4321E_BOARD 0x047c -+#define MP4321_BOARD 0x046c -+#define CB2_4321_BOARD 0x046d -+#define MC4321_BOARD 0x046e -+ -+/* # of GPIO pins */ -+#define GPIO_NUMPINS 16 -+ -+/* radio ID codes */ -+#define NORADIO_ID 0xe4f5 -+#define NORADIO_IDCODE 0x4e4f5246 -+ -+#define BCM2050_ID 0x2050 -+#define BCM2050_IDCODE 0x02050000 -+#define BCM2050A0_IDCODE 0x1205017f -+#define BCM2050A1_IDCODE 0x2205017f -+#define BCM2050R8_IDCODE 0x8205017f -+ -+#define BCM2055_ID 0x2055 -+#define BCM2055_IDCODE 0x02055000 -+#define BCM2055A0_IDCODE 0x1205517f -+ -+#define BCM2060_ID 0x2060 -+#define BCM2060_IDCODE 0x02060000 -+#define BCM2060WW_IDCODE 0x1206017f -+ -+#define BCM2062_ID 0x2062 -+#define BCM2062_IDCODE 0x02062000 -+#define BCM2062A0_IDCODE 0x0206217f -+ -+/* parts of an idcode: */ -+#define IDCODE_MFG_MASK 0x00000fff -+#define IDCODE_MFG_SHIFT 0 -+#define IDCODE_ID_MASK 0x0ffff000 -+#define IDCODE_ID_SHIFT 12 -+#define IDCODE_REV_MASK 0xf0000000 -+#define IDCODE_REV_SHIFT 28 -+ -+#endif /* _BCMDEVS_H */ -diff -urN linux.old/arch/mips/bcm947xx/include/bcmendian.h linux.dev/arch/mips/bcm947xx/include/bcmendian.h ---- linux.old/arch/mips/bcm947xx/include/bcmendian.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/bcmendian.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,198 @@ -+/* -+ * local version of endian.h - byte order defines -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: bcmendian.h,v 1.1.1.10 2006/02/27 03:43:16 honor Exp $ -+*/ -+ -+#ifndef _BCMENDIAN_H_ -+#define _BCMENDIAN_H_ -+ -+#include <typedefs.h> -+ -+/* Byte swap a 16 bit value */ -+#define BCMSWAP16(val) \ -+ ((uint16)(\ -+ (((uint16)(val) & (uint16)0x00ffU) << 8) | \ -+ (((uint16)(val) & (uint16)0xff00U) >> 8))) -+ -+/* Byte swap a 32 bit value */ -+#define BCMSWAP32(val) \ -+ ((uint32)(\ -+ (((uint32)(val) & (uint32)0x000000ffUL) << 24) | \ -+ (((uint32)(val) & (uint32)0x0000ff00UL) << 8) | \ -+ (((uint32)(val) & (uint32)0x00ff0000UL) >> 8) | \ -+ (((uint32)(val) & (uint32)0xff000000UL) >> 24))) -+ -+/* 2 Byte swap a 32 bit value */ -+#define BCMSWAP32BY16(val) \ -+ ((uint32)(\ -+ (((uint32)(val) & (uint32)0x0000ffffUL) << 16) | \ -+ (((uint32)(val) & (uint32)0xffff0000UL) >> 16))) -+ -+ -+static INLINE uint16 -+bcmswap16(uint16 val) -+{ -+ return BCMSWAP16(val); -+} -+ -+static INLINE uint32 -+bcmswap32(uint32 val) -+{ -+ return BCMSWAP32(val); -+} -+ -+static INLINE uint32 -+bcmswap32by16(uint32 val) -+{ -+ return BCMSWAP32BY16(val); -+} -+ -+/* buf - start of buffer of shorts to swap */ -+/* len - byte length of buffer */ -+static INLINE void -+bcmswap16_buf(uint16 *buf, uint len) -+{ -+ len = len/2; -+ -+ while (len--) { -+ *buf = bcmswap16(*buf); -+ buf++; -+ } -+} -+ -+#ifndef hton16 -+#ifndef IL_BIGENDIAN -+#define HTON16(i) BCMSWAP16(i) -+#define hton16(i) bcmswap16(i) -+#define hton32(i) bcmswap32(i) -+#define ntoh16(i) bcmswap16(i) -+#define ntoh32(i) bcmswap32(i) -+#define ltoh16(i) (i) -+#define ltoh32(i) (i) -+#define htol16(i) (i) -+#define htol32(i) (i) -+#else -+#define HTON16(i) (i) -+#define hton16(i) (i) -+#define hton32(i) (i) -+#define ntoh16(i) (i) -+#define ntoh32(i) (i) -+#define ltoh16(i) bcmswap16(i) -+#define ltoh32(i) bcmswap32(i) -+#define htol16(i) bcmswap16(i) -+#define htol32(i) bcmswap32(i) -+#endif /* IL_BIGENDIAN */ -+#endif /* hton16 */ -+ -+#ifndef IL_BIGENDIAN -+#define ltoh16_buf(buf, i) -+#define htol16_buf(buf, i) -+#else -+#define ltoh16_buf(buf, i) bcmswap16_buf((uint16*)buf, i) -+#define htol16_buf(buf, i) bcmswap16_buf((uint16*)buf, i) -+#endif /* IL_BIGENDIAN */ -+ -+/* -+* store 16-bit value to unaligned little endian byte array. -+*/ -+static INLINE void -+htol16_ua_store(uint16 val, uint8 *bytes) -+{ -+ bytes[0] = val&0xff; -+ bytes[1] = val>>8; -+} -+ -+/* -+* store 32-bit value to unaligned little endian byte array. -+*/ -+static INLINE void -+htol32_ua_store(uint32 val, uint8 *bytes) -+{ -+ bytes[0] = val&0xff; -+ bytes[1] = (val>>8)&0xff; -+ bytes[2] = (val>>16)&0xff; -+ bytes[3] = val>>24; -+} -+ -+/* -+* store 16-bit value to unaligned network(big) endian byte array. -+*/ -+static INLINE void -+hton16_ua_store(uint16 val, uint8 *bytes) -+{ -+ bytes[1] = val&0xff; -+ bytes[0] = val>>8; -+} -+ -+/* -+* store 32-bit value to unaligned network(big) endian byte array. -+*/ -+static INLINE void -+hton32_ua_store(uint32 val, uint8 *bytes) -+{ -+ bytes[3] = val&0xff; -+ bytes[2] = (val>>8)&0xff; -+ bytes[1] = (val>>16)&0xff; -+ bytes[0] = val>>24; -+} -+ -+/* -+* load 16-bit value from unaligned little endian byte array. -+*/ -+static INLINE uint16 -+ltoh16_ua(void *bytes) -+{ -+ return (((uint8*)bytes)[1]<<8)+((uint8 *)bytes)[0]; -+} -+ -+/* -+* load 32-bit value from unaligned little endian byte array. -+*/ -+static INLINE uint32 -+ltoh32_ua(void *bytes) -+{ -+ return (((uint8*)bytes)[3]<<24)+(((uint8*)bytes)[2]<<16)+ -+ (((uint8*)bytes)[1]<<8)+((uint8*)bytes)[0]; -+} -+ -+/* -+* load 16-bit value from unaligned big(network) endian byte array. -+*/ -+static INLINE uint16 -+ntoh16_ua(void *bytes) -+{ -+ return (((uint8*)bytes)[0]<<8)+((uint8*)bytes)[1]; -+} -+ -+/* -+* load 32-bit value from unaligned big(network) endian byte array. -+*/ -+static INLINE uint32 -+ntoh32_ua(void *bytes) -+{ -+ return (((uint8*)bytes)[0]<<24)+(((uint8*)bytes)[1]<<16)+ -+ (((uint8*)bytes)[2]<<8)+((uint8*)bytes)[3]; -+} -+ -+#define ltoh_ua(ptr) (\ -+ sizeof(*(ptr)) == sizeof(uint8) ? *(uint8 *)ptr : \ -+ sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] : \ -+ (((uint8 *)ptr)[3]<<24)+(((uint8 *)ptr)[2]<<16)+(((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] \ -+) -+ -+#define ntoh_ua(ptr) (\ -+ sizeof(*(ptr)) == sizeof(uint8) ? *(uint8 *)ptr : \ -+ sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[0]<<8)+((uint8 *)ptr)[1] : \ -+ (((uint8 *)ptr)[0]<<24)+(((uint8 *)ptr)[1]<<16)+(((uint8 *)ptr)[2]<<8)+((uint8 *)ptr)[3] \ -+) -+ -+#endif /* _BCMENDIAN_H_ */ -diff -urN linux.old/arch/mips/bcm947xx/include/bcmnvram.h linux.dev/arch/mips/bcm947xx/include/bcmnvram.h ---- linux.old/arch/mips/bcm947xx/include/bcmnvram.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/bcmnvram.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,159 @@ -+/* -+ * NVRAM variable manipulation -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: bcmnvram.h,v 1.17 2006/03/02 12:33:44 honor Exp $ -+ */ -+ -+#ifndef _bcmnvram_h_ -+#define _bcmnvram_h_ -+ -+#ifndef _LANGUAGE_ASSEMBLY -+ -+#include <typedefs.h> -+#include <bcmdefs.h> -+ -+struct nvram_header { -+ uint32 magic; -+ uint32 len; -+ uint32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:31 sdram_init */ -+ uint32 config_refresh; /* 0:15 sdram_config, 16:31 sdram_refresh */ -+ uint32 config_ncdl; /* ncdl values for memc */ -+}; -+ -+struct nvram_tuple { -+ char *name; -+ char *value; -+ struct nvram_tuple *next; -+}; -+ -+/* -+ * Initialize NVRAM access. May be unnecessary or undefined on certain -+ * platforms. -+ */ -+extern int nvram_init(void *sbh); -+ -+/* -+ * Disable NVRAM access. May be unnecessary or undefined on certain -+ * platforms. -+ */ -+extern void nvram_exit(void *sbh); -+ -+/* -+ * Get the value of an NVRAM variable. The pointer returned may be -+ * invalid after a set. -+ * @param name name of variable to get -+ * @return value of variable or NULL if undefined -+ */ -+extern char * nvram_get(const char *name); -+ -+/* -+ * Read the reset GPIO value from the nvram and set the GPIO -+ * as input -+ */ -+extern int BCMINITFN(nvram_resetgpio_init)(void *sbh); -+extern int BCMINITFN(nvram_gpio_init)(const char *name, void *sbh); -+extern int BCMINITFN(nvram_gpio_set)(const char *name, void *sbh, int type); -+ -+/* -+ * Get the value of an NVRAM variable. -+ * @param name name of variable to get -+ * @return value of variable or NUL if undefined -+ */ -+#define nvram_safe_get(name) (nvram_get(name) ? : "") -+ -+#define nvram_safe_unset(name) ({ \ -+ if(nvram_get(name)) \ -+ nvram_unset(name); \ -+}) -+ -+#define nvram_safe_set(name, value) ({ \ -+ if(!nvram_get(name) || strcmp(nvram_get(name), value)) \ -+ nvram_set(name, value); \ -+}) -+ -+/* -+ * Match an NVRAM variable. -+ * @param name name of variable to match -+ * @param match value to compare against value of variable -+ * @return TRUE if variable is defined and its value is string equal -+ * to match or FALSE otherwise -+ */ -+static INLINE int -+nvram_match(char *name, char *match) { -+ const char *value = nvram_get(name); -+ return (value && !strcmp(value, match)); -+} -+ -+/* -+ * Inversely match an NVRAM variable. -+ * @param name name of variable to match -+ * @param match value to compare against value of variable -+ * @return TRUE if variable is defined and its value is not string -+ * equal to invmatch or FALSE otherwise -+ */ -+static INLINE int -+nvram_invmatch(char *name, char *invmatch) { -+ const char *value = nvram_get(name); -+ return (value && strcmp(value, invmatch)); -+} -+ -+/* -+ * Set the value of an NVRAM variable. The name and value strings are -+ * copied into private storage. Pointers to previously set values -+ * may become invalid. The new value may be immediately -+ * retrieved but will not be permanently stored until a commit. -+ * @param name name of variable to set -+ * @param value value of variable -+ * @return 0 on success and errno on failure -+ */ -+extern int nvram_set(const char *name, const char *value); -+ -+/* -+ * Unset an NVRAM variable. Pointers to previously set values -+ * remain valid until a set. -+ * @param name name of variable to unset -+ * @return 0 on success and errno on failure -+ * NOTE: use nvram_commit to commit this change to flash. -+ */ -+extern int nvram_unset(const char *name); -+ -+/* -+ * Commit NVRAM variables to permanent storage. All pointers to values -+ * may be invalid after a commit. -+ * NVRAM values are undefined after a commit. -+ * @return 0 on success and errno on failure -+ */ -+extern int nvram_commit(void); -+ -+/* -+ * Get all NVRAM variables (format name=value\0 ... \0\0). -+ * @param buf buffer to store variables -+ * @param count size of buffer in bytes -+ * @return 0 on success and errno on failure -+ */ -+extern int nvram_getall(char *buf, int count); -+ -+extern int file2nvram(char *filename, char *varname); -+extern int nvram2file(char *varname, char *filename); -+ -+#endif /* _LANGUAGE_ASSEMBLY */ -+ -+#define NVRAM_MAGIC 0x48534C46 /* 'FLSH' */ -+#define NVRAM_CLEAR_MAGIC 0x0 -+#define NVRAM_INVALID_MAGIC 0xFFFFFFFF -+#define NVRAM_VERSION 1 -+#define NVRAM_HEADER_SIZE 20 -+#define NVRAM_SPACE 0x8000 -+ -+#define NVRAM_MAX_VALUE_LEN 255 -+#define NVRAM_MAX_PARAM_LEN 64 -+ -+#endif /* _bcmnvram_h_ */ -diff -urN linux.old/arch/mips/bcm947xx/include/bcmsrom.h linux.dev/arch/mips/bcm947xx/include/bcmsrom.h ---- linux.old/arch/mips/bcm947xx/include/bcmsrom.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/bcmsrom.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,108 @@ -+/* -+ * Misc useful routines to access NIC local SROM/OTP . -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: bcmsrom.h,v 1.1.1.13 2006/04/15 01:29:08 michael Exp $ -+ */ -+ -+#ifndef _bcmsrom_h_ -+#define _bcmsrom_h_ -+ -+/* Maximum srom: 4 Kilobits == 512 bytes */ -+#define SROM_MAX 512 -+ -+/* SROM Rev 4: Reallocate the software part of the srom to accomodate -+ * MIMO features. It assumes up to two PCIE functions and 440 bytes -+ * of useable srom i.e. the useable storage in chips with OTP that -+ * implements hardware redundancy. -+ */ -+ -+#define SROM4_WORDS 220 -+ -+#define SROM4_SIGN 32 -+#define SROM4_SIGNATURE 0x5372 -+ -+#define SROM4_BREV 33 -+ -+#define SROM4_BFL0 34 -+#define SROM4_BFL1 35 -+#define SROM4_BFL2 36 -+#define SROM4_BFL3 37 -+ -+#define SROM4_MACHI 38 -+#define SROM4_MACMID 39 -+#define SROM4_MACLO 40 -+ -+#define SROM4_CCODE 41 -+#define SROM4_REGREV 42 -+ -+#define SROM4_LEDBH10 43 -+#define SROM4_LEDBH32 44 -+ -+#define SROM4_LEDDC 45 -+ -+#define SROM4_AA 46 -+#define SROM4_AA2G_MASK 0x00ff -+#define SROM4_AA2G_SHIFT 0 -+#define SROM4_AA5G_MASK 0xff00 -+#define SROM4_AA5G_SHIFT 8 -+ -+#define SROM4_AG10 47 -+#define SROM4_AG32 48 -+ -+#define SROM4_TXPID2G 49 -+#define SROM4_TXPID5G 51 -+#define SROM4_TXPID5GL 53 -+#define SROM4_TXPID5GH 55 -+ -+/* Per-path fields */ -+#define MAX_PATH 4 -+#define SROM4_PATH0 64 -+#define SROM4_PATH1 87 -+#define SROM4_PATH2 110 -+#define SROM4_PATH3 133 -+ -+#define SROM4_2G_ITT_MAXP 0 -+#define SROM4_2G_PA 1 -+#define SROM4_5G_ITT_MAXP 5 -+#define SROM4_5GLH_MAXP 6 -+#define SROM4_5G_PA 7 -+#define SROM4_5GL_PA 11 -+#define SROM4_5GH_PA 15 -+ -+/* Fields in the ITT_MAXP and 5GLH_MAXP words */ -+#define B2G_MAXP_MASK 0xff -+#define B2G_ITT_SHIFT 8 -+#define B5G_MAXP_MASK 0xff -+#define B5G_ITT_SHIFT 8 -+#define B5GH_MAXP_MASK 0xff -+#define B5GL_MAXP_SHIFT 8 -+ -+/* All the miriad power offsets */ -+#define SROM4_2G_CCKPO 156 -+#define SROM4_2G_OFDMPO 157 -+#define SROM4_5G_OFDMPO 159 -+#define SROM4_5GL_OFDMPO 161 -+#define SROM4_5GH_OFDMPO 163 -+#define SROM4_2G_MCSPO 165 -+#define SROM4_5G_MCSPO 173 -+#define SROM4_5GL_MCSPO 181 -+#define SROM4_5GH_MCSPO 189 -+#define SROM4_CCDPO 197 -+#define SROM4_STBCPO 198 -+#define SROM4_BW40PO 199 -+#define SROM4_BWDUPPO 200 -+ -+extern int srom_var_init(void *sbh, uint bus, void *curmap, osl_t *osh, char **vars, uint *count); -+ -+extern int srom_read(uint bus, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf); -+extern int srom_write(uint bus, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf); -+ -+#endif /* _bcmsrom_h_ */ -diff -urN linux.old/arch/mips/bcm947xx/include/bcmutils.h linux.dev/arch/mips/bcm947xx/include/bcmutils.h ---- linux.old/arch/mips/bcm947xx/include/bcmutils.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/bcmutils.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,433 @@ -+/* -+ * Misc useful os-independent macros and functions. -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id: bcmutils.h,v 1.1.1.16 2006/04/08 06:13:39 honor Exp $ -+ */ -+ -+#ifndef _bcmutils_h_ -+#define _bcmutils_h_ -+ -+/* ** driver-only section ** */ -+#ifdef BCMDRIVER -+ -+#define _BCM_U 0x01 /* upper */ -+#define _BCM_L 0x02 /* lower */ -+#define _BCM_D 0x04 /* digit */ -+#define _BCM_C 0x08 /* cntrl */ -+#define _BCM_P 0x10 /* punct */ -+#define _BCM_S 0x20 /* white space (space/lf/tab) */ -+#define _BCM_X 0x40 /* hex digit */ -+#define _BCM_SP 0x80 /* hard space (0x20) */ -+ -+#define GPIO_PIN_NOTDEFINED 0x20 /* Pin not defined */ -+ -+extern unsigned char bcm_ctype[]; -+#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)]) -+ -+#define bcm_isalnum(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0) -+#define bcm_isalpha(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0) -+#define bcm_iscntrl(c) ((bcm_ismask(c)&(_BCM_C)) != 0) -+#define bcm_isdigit(c) ((bcm_ismask(c)&(_BCM_D)) != 0) -+#define bcm_isgraph(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0) -+#define bcm_islower(c) ((bcm_ismask(c)&(_BCM_L)) != 0) -+#define bcm_isprint(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0) -+#define bcm_ispunct(c) ((bcm_ismask(c)&(_BCM_P)) != 0) -+#define bcm_isspace(c) ((bcm_ismask(c)&(_BCM_S)) != 0) -+#define bcm_isupper(c) ((bcm_ismask(c)&(_BCM_U)) != 0) -+#define bcm_isxdigit(c) ((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0) -+ -+/* -+ * Spin at most 'us' microseconds while 'exp' is true. -+ * Caller should explicitly test 'exp' when this completes -+ * and take appropriate error action if 'exp' is still true. -+ */ -+#define SPINWAIT(exp, us) { \ -+ uint countdown = (us) + 9; \ -+ while ((exp) && (countdown >= 10)) {\ -+ OSL_DELAY(10); \ -+ countdown -= 10; \ -+ } \ -+} -+ -+struct ether_addr { -+ uint8 octet[6]; -+} __attribute__((packed)); -+ -+/* string */ -+extern uchar bcm_toupper(uchar c); -+extern ulong bcm_strtoul(char *cp, char **endp, uint base); -+extern char *bcmstrstr(char *haystack, char *needle); -+extern char *bcmstrcat(char *dest, const char *src); -+extern ulong wchar2ascii(char *abuf, ushort *wbuf, ushort wbuflen, ulong abuflen); -+/* ethernet address */ -+extern char *bcm_ether_ntoa(struct ether_addr *ea, char *buf); -+/* variable access */ -+extern char *getvar(char *vars, char *name); -+extern int getintvar(char *vars, char *name); -+extern uint getgpiopin(char *vars, char *pin_name, uint def_pin); -+#ifdef BCMPERFSTATS -+extern void bcm_perf_enable(void); -+extern void bcmstats(char *fmt); -+extern void bcmlog(char *fmt, uint a1, uint a2); -+extern void bcmdumplog(char *buf, int size); -+extern int bcmdumplogent(char *buf, uint idx); -+#else -+#define bcm_perf_enable() -+#define bcmstats(fmt) -+#define bcmlog(fmt, a1, a2) -+#define bcmdumplog(buf, size) *buf = '\0' -+#define bcmdumplogent(buf, idx) -1 -+#endif /* BCMPERFSTATS */ -+extern char *bcm_nvram_vars(uint *length); -+extern int bcm_nvram_cache(void *sbh); -+ -+/* Support for sharing code across in-driver iovar implementations. -+ * The intent is that a driver use this structure to map iovar names -+ * to its (private) iovar identifiers, and the lookup function to -+ * find the entry. Macros are provided to map ids and get/set actions -+ * into a single number space for a switch statement. -+ */ -+ -+/* iovar structure */ -+typedef struct bcm_iovar { -+ const char *name; /* name for lookup and display */ -+ uint16 varid; /* id for switch */ -+ uint16 flags; /* driver-specific flag bits */ -+ uint16 type; /* base type of argument */ -+ uint16 minlen; /* min length for buffer vars */ -+} bcm_iovar_t; -+ -+/* varid definitions are per-driver, may use these get/set bits */ -+ -+/* IOVar action bits for id mapping */ -+#define IOV_GET 0 /* Get an iovar */ -+#define IOV_SET 1 /* Set an iovar */ -+ -+/* Varid to actionid mapping */ -+#define IOV_GVAL(id) ((id)*2) -+#define IOV_SVAL(id) (((id)*2)+IOV_SET) -+#define IOV_ISSET(actionid) ((actionid & IOV_SET) == IOV_SET) -+ -+/* flags are per-driver based on driver attributes */ -+ -+/* Base type definitions */ -+#define IOVT_VOID 0 /* no value (implictly set only) */ -+#define IOVT_BOOL 1 /* any value ok (zero/nonzero) */ -+#define IOVT_INT8 2 /* integer values are range-checked */ -+#define IOVT_UINT8 3 /* unsigned int 8 bits */ -+#define IOVT_INT16 4 /* int 16 bits */ -+#define IOVT_UINT16 5 /* unsigned int 16 bits */ -+#define IOVT_INT32 6 /* int 32 bits */ -+#define IOVT_UINT32 7 /* unsigned int 32 bits */ -+#define IOVT_BUFFER 8 /* buffer is size-checked as per minlen */ -+ -+extern const bcm_iovar_t *bcm_iovar_lookup(const bcm_iovar_t *table, const char *name); -+extern int bcm_iovar_lencheck(const bcm_iovar_t *table, void *arg, int len, bool set); -+ -+#endif /* #ifdef BCMDRIVER */ -+ -+/* ** driver/apps-shared section ** */ -+ -+#define BCME_STRLEN 64 /* Max string length for BCM errors */ -+#define VALID_BCMERROR(e) ((e <= 0) && (e >= BCME_LAST)) -+ -+ -+/* -+ * error codes could be added but the defined ones shouldn't be changed/deleted -+ * these error codes are exposed to the user code -+ * when ever a new error code is added to this list -+ * please update errorstring table with the related error string and -+ * update osl files with os specific errorcode map -+*/ -+ -+#define BCME_OK 0 /* Success */ -+#define BCME_ERROR -1 /* Error generic */ -+#define BCME_BADARG -2 /* Bad Argument */ -+#define BCME_BADOPTION -3 /* Bad option */ -+#define BCME_NOTUP -4 /* Not up */ -+#define BCME_NOTDOWN -5 /* Not down */ -+#define BCME_NOTAP -6 /* Not AP */ -+#define BCME_NOTSTA -7 /* Not STA */ -+#define BCME_BADKEYIDX -8 /* BAD Key Index */ -+#define BCME_RADIOOFF -9 /* Radio Off */ -+#define BCME_NOTBANDLOCKED -10 /* Not band locked */ -+#define BCME_NOCLK -11 /* No Clock */ -+#define BCME_BADRATESET -12 /* BAD Rate valueset */ -+#define BCME_BADBAND -13 /* BAD Band */ -+#define BCME_BUFTOOSHORT -14 /* Buffer too short */ -+#define BCME_BUFTOOLONG -15 /* Buffer too long */ -+#define BCME_BUSY -16 /* Busy */ -+#define BCME_NOTASSOCIATED -17 /* Not Associated */ -+#define BCME_BADSSIDLEN -18 /* Bad SSID len */ -+#define BCME_OUTOFRANGECHAN -19 /* Out of Range Channel */ -+#define BCME_BADCHAN -20 /* Bad Channel */ -+#define BCME_BADADDR -21 /* Bad Address */ -+#define BCME_NORESOURCE -22 /* Not Enough Resources */ -+#define BCME_UNSUPPORTED -23 /* Unsupported */ -+#define BCME_BADLEN -24 /* Bad length */ -+#define BCME_NOTREADY -25 /* Not Ready */ -+#define BCME_EPERM -26 /* Not Permitted */ -+#define BCME_NOMEM -27 /* No Memory */ -+#define BCME_ASSOCIATED -28 /* Associated */ -+#define BCME_RANGE -29 /* Not In Range */ -+#define BCME_NOTFOUND -30 /* Not Found */ -+#define BCME_WME_NOT_ENABLED -31 /* WME Not Enabled */ -+#define BCME_TSPEC_NOTFOUND -32 /* TSPEC Not Found */ -+#define BCME_ACM_NOTSUPPORTED -33 /* ACM Not Supported */ -+#define BCME_NOT_WME_ASSOCIATION -34 /* Not WME Association */ -+#define BCME_SDIO_ERROR -35 /* SDIO Bus Error */ -+#define BCME_DONGLE_DOWN -36 /* Dongle Not Accessible */ -+#define BCME_LAST BCME_DONGLE_DOWN -+ -+/* These are collection of BCME Error strings */ -+#define BCMERRSTRINGTABLE { \ -+ "OK", \ -+ "Undefined error", \ -+ "Bad Argument", \ -+ "Bad Option", \ -+ "Not up", \ -+ "Not down", \ -+ "Not AP", \ -+ "Not STA", \ -+ "Bad Key Index", \ -+ "Radio Off", \ -+ "Not band locked", \ -+ "No clock", \ -+ "Bad Rate valueset", \ -+ "Bad Band", \ -+ "Buffer too short", \ -+ "Buffer too long", \ -+ "Busy", \ -+ "Not Associated", \ -+ "Bad SSID len", \ -+ "Out of Range Channel", \ -+ "Bad Channel", \ -+ "Bad Address", \ -+ "Not Enough Resources", \ -+ "Unsupported", \ -+ "Bad length", \ -+ "Not Ready", \ -+ "Not Permitted", \ -+ "No Memory", \ -+ "Associated", \ -+ "Not In Range", \ -+ "Not Found", \ -+ "WME Not Enabled", \ -+ "TSPEC Not Found", \ -+ "ACM Not Supported", \ -+ "Not WME Association", \ -+ "SDIO Bus Error", \ -+ "Dongle Not Accessible" \ -+} -+ -+#ifndef ABS -+#define ABS(a) (((a) < 0)?-(a):(a)) -+#endif /* ABS */ -+ -+#ifndef MIN -+#define MIN(a, b) (((a) < (b))?(a):(b)) -+#endif /* MIN */ -+ -+#ifndef MAX -+#define MAX(a, b) (((a) > (b))?(a):(b)) -+#endif /* MAX */ -+ -+#define CEIL(x, y) (((x) + ((y)-1)) / (y)) -+#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y)) -+#define ISALIGNED(a, x) (((a) & ((x)-1)) == 0) -+#define ISPOWEROF2(x) ((((x)-1)&(x)) == 0) -+#define VALID_MASK(mask) !((mask) & ((mask) + 1)) -+#define OFFSETOF(type, member) ((uint)(uintptr)&((type *)0)->member) -+#define ARRAYSIZE(a) (sizeof(a)/sizeof(a[0])) -+ -+/* bit map related macros */ -+#ifndef setbit -+#ifndef NBBY /* the BSD family defines NBBY */ -+#define NBBY 8 /* 8 bits per byte */ -+#endif /* #ifndef NBBY */ -+#define setbit(a, i) (((uint8 *)a)[(i)/NBBY] |= 1<<((i)%NBBY)) -+#define clrbit(a, i) (((uint8 *)a)[(i)/NBBY] &= ~(1<<((i)%NBBY))) -+#define isset(a, i) (((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) -+#define isclr(a, i) ((((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0) -+#endif /* setbit */ -+ -+#define NBITS(type) (sizeof(type) * 8) -+#define NBITVAL(nbits) (1 << (nbits)) -+#define MAXBITVAL(nbits) ((1 << (nbits)) - 1) -+#define NBITMASK(nbits) MAXBITVAL(nbits) -+#define MAXNBVAL(nbyte) MAXBITVAL((nbyte) * 8) -+ -+/* basic mux operation - can be optimized on several architectures */ -+#define MUX(pred, true, false) ((pred) ? (true) : (false)) -+ -+/* modulo inc/dec - assumes x E [0, bound - 1] */ -+#define MODDEC(x, bound) MUX((x) == 0, (bound) - 1, (x) - 1) -+#define MODINC(x, bound) MUX((x) == (bound) - 1, 0, (x) + 1) -+ -+/* modulo inc/dec, bound = 2^k */ -+#define MODDEC_POW2(x, bound) (((x) - 1) & ((bound) - 1)) -+#define MODINC_POW2(x, bound) (((x) + 1) & ((bound) - 1)) -+ -+/* modulo add/sub - assumes x, y E [0, bound - 1] */ -+#define MODADD(x, y, bound) \ -+ MUX((x) + (y) >= (bound), (x) + (y) - (bound), (x) + (y)) -+#define MODSUB(x, y, bound) \ -+ MUX(((int)(x)) - ((int)(y)) < 0, (x) - (y) + (bound), (x) - (y)) -+ -+/* module add/sub, bound = 2^k */ -+#define MODADD_POW2(x, y, bound) (((x) + (y)) & ((bound) - 1)) -+#define MODSUB_POW2(x, y, bound) (((x) - (y)) & ((bound) - 1)) -+ -+/* crc defines */ -+#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */ -+#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */ -+#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */ -+#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */ -+#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ -+#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */ -+ -+/* bcm_format_flags() bit description structure */ -+typedef struct bcm_bit_desc { -+ uint32 bit; -+ char* name; -+} bcm_bit_desc_t; -+ -+/* tag_ID/length/value_buffer tuple */ -+typedef struct bcm_tlv { -+ uint8 id; -+ uint8 len; -+ uint8 data[1]; -+} bcm_tlv_t; -+ -+/* Check that bcm_tlv_t fits into the given buflen */ -+#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (int)(buflen) >= (int)(2 + (elt)->len)) -+ -+/* buffer length for ethernet address from bcm_ether_ntoa() */ -+#define ETHER_ADDR_STR_LEN 18 /* 18-bytes of Ethernet address buffer length */ -+ -+/* unaligned load and store macros */ -+#ifdef IL_BIGENDIAN -+static INLINE uint32 -+load32_ua(uint8 *a) -+{ -+ return ((a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]); -+} -+ -+static INLINE void -+store32_ua(uint8 *a, uint32 v) -+{ -+ a[0] = (v >> 24) & 0xff; -+ a[1] = (v >> 16) & 0xff; -+ a[2] = (v >> 8) & 0xff; -+ a[3] = v & 0xff; -+} -+ -+static INLINE uint16 -+load16_ua(uint8 *a) -+{ -+ return ((a[0] << 8) | a[1]); -+} -+ -+static INLINE void -+store16_ua(uint8 *a, uint16 v) -+{ -+ a[0] = (v >> 8) & 0xff; -+ a[1] = v & 0xff; -+} -+ -+#else -+ -+static INLINE uint32 -+load32_ua(uint8 *a) -+{ -+ return ((a[3] << 24) | (a[2] << 16) | (a[1] << 8) | a[0]); -+} -+ -+static INLINE void -+store32_ua(uint8 *a, uint32 v) -+{ -+ a[3] = (v >> 24) & 0xff; -+ a[2] = (v >> 16) & 0xff; -+ a[1] = (v >> 8) & 0xff; -+ a[0] = v & 0xff; -+} -+ -+static INLINE uint16 -+load16_ua(uint8 *a) -+{ -+ return ((a[1] << 8) | a[0]); -+} -+ -+static INLINE void -+store16_ua(uint8 *a, uint16 v) -+{ -+ a[1] = (v >> 8) & 0xff; -+ a[0] = v & 0xff; -+} -+ -+#endif /* IL_BIGENDIAN */ -+ -+/* externs */ -+/* crc */ -+extern uint8 hndcrc8(uint8 *p, uint nbytes, uint8 crc); -+extern uint16 hndcrc16(uint8 *p, uint nbytes, uint16 crc); -+extern uint32 hndcrc32(uint8 *p, uint nbytes, uint32 crc); -+/* format/print */ -+extern void printfbig(char *buf); -+ -+/* IE parsing */ -+extern bcm_tlv_t *bcm_next_tlv(bcm_tlv_t *elt, int *buflen); -+extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key); -+extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key); -+ -+/* bcmerror */ -+extern const char *bcmerrorstr(int bcmerror); -+ -+/* multi-bool data type: set of bools, mbool is true if any is set */ -+typedef uint32 mbool; -+#define mboolset(mb, bit) (mb |= bit) /* set one bool */ -+#define mboolclr(mb, bit) (mb &= ~bit) /* clear one bool */ -+#define mboolisset(mb, bit) ((mb & bit) != 0) /* TRUE if one bool is set */ -+#define mboolmaskset(mb, mask, val) ((mb) = (((mb) & ~(mask)) | (val))) -+ -+/* power conversion */ -+extern uint16 bcm_qdbm_to_mw(uint8 qdbm); -+extern uint8 bcm_mw_to_qdbm(uint16 mw); -+ -+/* generic datastruct to help dump routines */ -+struct fielddesc { -+ char *nameandfmt; -+ uint32 offset; -+ uint32 len; -+}; -+ -+/* Buffer structure for collecting string-formatted data -+* using bcm_bprintf() API. -+* Use bcm_binit() to initialize before use -+*/ -+struct bcmstrbuf -+{ -+ char *buf; /* pointer to current position in origbuf */ -+ uint size; /* current (residual) size in bytes */ -+ char *origbuf; /* unmodified pointer to orignal buffer */ -+ uint origsize; /* unmodified orignal buffer size in bytes */ -+}; -+ -+extern void bcm_binit(struct bcmstrbuf *b, char *buf, uint size); -+extern int bcm_bprintf(struct bcmstrbuf *b, const char *fmt, ...); -+ -+typedef uint32 (*readreg_rtn)(void *arg0, void *arg1, uint32 offset); -+extern uint bcmdumpfields(readreg_rtn func_ptr, void *arg0, void *arg1, struct fielddesc *str, -+ char *buf, uint32 bufsize); -+ -+extern uint bcm_mkiovar(char *name, char *data, uint datalen, char *buf, uint len); -+extern uint bcm_bitcount(uint8 *bitmap, uint bytelength); -+ -+#endif /* _bcmutils_h_ */ -diff -urN linux.old/arch/mips/bcm947xx/include/hndcpu.h linux.dev/arch/mips/bcm947xx/include/hndcpu.h ---- linux.old/arch/mips/bcm947xx/include/hndcpu.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/hndcpu.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,28 @@ -+/* -+ * HND SiliconBackplane MIPS/ARM cores software interface. -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: hndcpu.h,v 1.1.1.1 2006/02/27 03:43:16 honor Exp $ -+ */ -+ -+#ifndef _hndcpu_h_ -+#define _hndcpu_h_ -+ -+#if defined(mips) -+#include <hndmips.h> -+#elif defined(__ARM_ARCH_4T__) -+#include <hndarm.h> -+#endif -+ -+extern uint sb_irq(sb_t *sbh); -+extern uint32 sb_cpu_clock(sb_t *sbh); -+extern void sb_cpu_wait(void); -+ -+#endif /* _hndcpu_h_ */ -diff -urN linux.old/arch/mips/bcm947xx/include/hndmips.h linux.dev/arch/mips/bcm947xx/include/hndmips.h ---- linux.old/arch/mips/bcm947xx/include/hndmips.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/hndmips.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,45 @@ -+/* -+ * HND SiliconBackplane MIPS core software interface. -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: hndmips.h,v 1.1.1.8 2006/02/27 03:43:16 honor Exp $ -+ */ -+ -+#ifndef _hndmips_h_ -+#define _hndmips_h_ -+ -+extern void sb_mips_init(sb_t *sbh, uint shirq_map_base); -+extern bool sb_mips_setclock(sb_t *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock); -+extern void enable_pfc(uint32 mode); -+extern uint32 sb_memc_get_ncdl(sb_t *sbh); -+ -+#if defined(BCMPERFSTATS) -+/* enable counting - exclusive version. Only one set of counters allowed at a time */ -+extern void hndmips_perf_instrcount_enable(void); -+extern void hndmips_perf_icachecount_enable(void); -+extern void hndmips_perf_dcachecount_enable(void); -+/* start and stop counting */ -+#define hndmips_perf_start01() \ -+ MTC0(C0_PERFORMANCE, 4, MFC0(C0_PERFORMANCE, 4) | 0x80008000) -+#define hndmips_perf_stop01() \ -+ MTC0(C0_PERFORMANCE, 4, MFC0(C0_PERFORMANCE, 4) & ~0x80008000) -+/* retrieve coutners - counters *decrement* */ -+#define hndmips_perf_read0() -(long)(MFC0(C0_PERFORMANCE, 0)) -+#define hndmips_perf_read1() -(long)(MFC0(C0_PERFORMANCE, 1)) -+#define hndmips_perf_read2() -(long)(MFC0(C0_PERFORMANCE, 2)) -+/* enable counting - modular version. Each counters can be enabled separately. */ -+extern void hndmips_perf_icache_hit_enable(void); -+extern void hndmips_perf_icache_miss_enable(void); -+extern uint32 hndmips_perf_read_instrcount(void); -+extern uint32 hndmips_perf_read_cache_miss(void); -+extern uint32 hndmips_perf_read_cache_hit(void); -+#endif /* defined(BCMINTERNAL) || defined (BCMPERFSTATS) */ -+ -+#endif /* _hndmips_h_ */ -diff -urN linux.old/arch/mips/bcm947xx/include/hndpci.h linux.dev/arch/mips/bcm947xx/include/hndpci.h ---- linux.old/arch/mips/bcm947xx/include/hndpci.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/hndpci.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,30 @@ -+/* -+ * HND SiliconBackplane PCI core software interface. -+ * -+ * $Id: hndpci.h,v 1.1.1.1 2006/02/27 03:43:16 honor Exp $ -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ */ -+ -+#ifndef _hndpci_h_ -+#define _hndpci_h_ -+ -+extern int sbpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, -+ int len); -+extern int extpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, -+ int len); -+extern int sbpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, -+ int len); -+extern int extpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, -+ int len); -+extern void sbpci_ban(uint16 core); -+extern int sbpci_init(sb_t *sbh); -+extern int sbpci_init_pci(sb_t *sbh); -+extern void sbpci_check(sb_t *sbh); -+ -+#endif /* _hndpci_h_ */ -diff -urN linux.old/arch/mips/bcm947xx/include/linuxver.h linux.dev/arch/mips/bcm947xx/include/linuxver.h ---- linux.old/arch/mips/bcm947xx/include/linuxver.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/linuxver.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,417 @@ -+/* -+ * Linux-specific abstractions to gain some independence from linux kernel versions. -+ * Pave over some 2.2 versus 2.4 versus 2.6 kernel differences. -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: linuxver.h,v 1.1.1.10 2006/02/27 03:43:16 honor Exp $ -+ */ -+ -+#ifndef _linuxver_h_ -+#define _linuxver_h_ -+ -+#include <linux/config.h> -+#include <linux/version.h> -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 0)) -+/* __NO_VERSION__ must be defined for all linkables except one in 2.2 */ -+#ifdef __UNDEF_NO_VERSION__ -+#undef __NO_VERSION__ -+#else -+#define __NO_VERSION__ -+#endif -+#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 0) */ -+ -+#if defined(MODULE) && defined(MODVERSIONS) -+#include <linux/modversions.h> -+#endif -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 5, 0) -+#include <linux/moduleparam.h> -+#endif -+ -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 5, 0) -+#define module_param(_name_, _type_, _perm_) MODULE_PARM(_name_, "i") -+#define module_param_string(_name_, _string_, _size_, _perm_) \ -+ MODULE_PARM(_string_, "c" __MODULE_STRING(_size_)) -+#endif -+ -+/* linux/malloc.h is deprecated, use linux/slab.h instead. */ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 9)) -+#include <linux/malloc.h> -+#else -+#include <linux/slab.h> -+#endif -+ -+#include <linux/types.h> -+#include <linux/init.h> -+#include <linux/mm.h> -+#include <linux/string.h> -+#include <linux/pci.h> -+#include <linux/interrupt.h> -+#include <linux/netdevice.h> -+#include <asm/io.h> -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 41)) -+#include <linux/workqueue.h> -+#else -+#include <linux/tqueue.h> -+#ifndef work_struct -+#define work_struct tq_struct -+#endif -+#ifndef INIT_WORK -+#define INIT_WORK(_work, _func, _data) INIT_TQUEUE((_work), (_func), (_data)) -+#endif -+#ifndef schedule_work -+#define schedule_work(_work) schedule_task((_work)) -+#endif -+#ifndef flush_scheduled_work -+#define flush_scheduled_work() flush_scheduled_tasks() -+#endif -+#endif /* LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 41) */ -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0)) -+/* Some distributions have their own 2.6.x compatibility layers */ -+#ifndef IRQ_NONE -+typedef void irqreturn_t; -+#define IRQ_NONE -+#define IRQ_HANDLED -+#define IRQ_RETVAL(x) -+#endif -+#else -+typedef irqreturn_t(*FN_ISR) (int irq, void *dev_id, struct pt_regs *ptregs); -+#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0) */ -+ -+#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE) -+ -+#include <pcmcia/version.h> -+#include <pcmcia/cs_types.h> -+#include <pcmcia/cs.h> -+#include <pcmcia/cistpl.h> -+#include <pcmcia/cisreg.h> -+#include <pcmcia/ds.h> -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 5, 69)) -+/* In 2.5 (as of 2.5.69 at least) there is a cs_error exported which -+ * does this, but it's not in 2.4 so we do our own for now. -+ */ -+static inline void -+cs_error(client_handle_t handle, int func, int ret) -+{ -+ error_info_t err = { func, ret }; -+ CardServices(ReportError, handle, &err); -+} -+#endif -+ -+#endif /* CONFIG_PCMCIA */ -+ -+#ifndef __exit -+#define __exit -+#endif -+#ifndef __devexit -+#define __devexit -+#endif -+#ifndef __devinit -+#define __devinit __init -+#endif -+#ifndef __devinitdata -+#define __devinitdata -+#endif -+#ifndef __devexit_p -+#define __devexit_p(x) x -+#endif -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 0)) -+ -+#define pci_get_drvdata(dev) (dev)->sysdata -+#define pci_set_drvdata(dev, value) (dev)->sysdata = (value) -+ -+/* -+ * New-style (2.4.x) PCI/hot-pluggable PCI/CardBus registration -+ */ -+ -+struct pci_device_id { -+ unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */ -+ unsigned int subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */ -+ unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */ -+ unsigned long driver_data; /* Data private to the driver */ -+}; -+ -+struct pci_driver { -+ struct list_head node; -+ char *name; -+ const struct pci_device_id *id_table; /* NULL if wants all devices */ -+ int (*probe)(struct pci_dev *dev, -+ const struct pci_device_id *id); /* New device inserted */ -+ void (*remove)(struct pci_dev *dev); /* Device removed (NULL if not a hot-plug -+ * capable driver) -+ */ -+ void (*suspend)(struct pci_dev *dev); /* Device suspended */ -+ void (*resume)(struct pci_dev *dev); /* Device woken up */ -+}; -+ -+#define MODULE_DEVICE_TABLE(type, name) -+#define PCI_ANY_ID (~0) -+ -+/* compatpci.c */ -+#define pci_module_init pci_register_driver -+extern int pci_register_driver(struct pci_driver *drv); -+extern void pci_unregister_driver(struct pci_driver *drv); -+ -+#endif /* PCI registration */ -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 2, 18)) -+#ifdef MODULE -+#define module_init(x) int init_module(void) { return x(); } -+#define module_exit(x) void cleanup_module(void) { x(); } -+#else -+#define module_init(x) __initcall(x); -+#define module_exit(x) __exitcall(x); -+#endif -+#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2, 2, 18) */ -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 48)) -+#define list_for_each(pos, head) \ -+ for (pos = (head)->next; pos != (head); pos = pos->next) -+#endif -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 13)) -+#define pci_resource_start(dev, bar) ((dev)->base_address[(bar)]) -+#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 44)) -+#define pci_resource_start(dev, bar) ((dev)->resource[(bar)].start) -+#endif -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 23)) -+#define pci_enable_device(dev) do { } while (0) -+#endif -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 14)) -+#define net_device device -+#endif -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 42)) -+ -+/* -+ * DMA mapping -+ * -+ * See linux/Documentation/DMA-mapping.txt -+ */ -+ -+#ifndef PCI_DMA_TODEVICE -+#define PCI_DMA_TODEVICE 1 -+#define PCI_DMA_FROMDEVICE 2 -+#endif -+ -+typedef u32 dma_addr_t; -+ -+/* Pure 2^n version of get_order */ -+static inline int get_order(unsigned long size) -+{ -+ int order; -+ -+ size = (size-1) >> (PAGE_SHIFT-1); -+ order = -1; -+ do { -+ size >>= 1; -+ order++; -+ } while (size); -+ return order; -+} -+ -+static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, -+ dma_addr_t *dma_handle) -+{ -+ void *ret; -+ int gfp = GFP_ATOMIC | GFP_DMA; -+ -+ ret = (void *)__get_free_pages(gfp, get_order(size)); -+ -+ if (ret != NULL) { -+ memset(ret, 0, size); -+ *dma_handle = virt_to_bus(ret); -+ } -+ return ret; -+} -+static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size, -+ void *vaddr, dma_addr_t dma_handle) -+{ -+ free_pages((unsigned long)vaddr, get_order(size)); -+} -+#ifdef ILSIM -+extern uint pci_map_single(void *dev, void *va, uint size, int direction); -+extern void pci_unmap_single(void *dev, uint pa, uint size, int direction); -+#else -+#define pci_map_single(cookie, address, size, dir) virt_to_bus(address) -+#define pci_unmap_single(cookie, address, size, dir) -+#endif -+ -+#endif /* DMA mapping */ -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 43)) -+ -+#define dev_kfree_skb_any(a) dev_kfree_skb(a) -+#define netif_down(dev) do { (dev)->start = 0; } while (0) -+ -+/* pcmcia-cs provides its own netdevice compatibility layer */ -+#ifndef _COMPAT_NETDEVICE_H -+ -+/* -+ * SoftNet -+ * -+ * For pre-softnet kernels we need to tell the upper layer not to -+ * re-enter start_xmit() while we are in there. However softnet -+ * guarantees not to enter while we are in there so there is no need -+ * to do the netif_stop_queue() dance unless the transmit queue really -+ * gets stuck. This should also improve performance according to tests -+ * done by Aman Singla. -+ */ -+ -+#define dev_kfree_skb_irq(a) dev_kfree_skb(a) -+#define netif_wake_queue(dev) \ -+ do { clear_bit(0, &(dev)->tbusy); mark_bh(NET_BH); } while (0) -+#define netif_stop_queue(dev) set_bit(0, &(dev)->tbusy) -+ -+static inline void netif_start_queue(struct net_device *dev) -+{ -+ dev->tbusy = 0; -+ dev->interrupt = 0; -+ dev->start = 1; -+} -+ -+#define netif_queue_stopped(dev) (dev)->tbusy -+#define netif_running(dev) (dev)->start -+ -+#endif /* _COMPAT_NETDEVICE_H */ -+ -+#define netif_device_attach(dev) netif_start_queue(dev) -+#define netif_device_detach(dev) netif_stop_queue(dev) -+ -+/* 2.4.x renamed bottom halves to tasklets */ -+#define tasklet_struct tq_struct -+static inline void tasklet_schedule(struct tasklet_struct *tasklet) -+{ -+ queue_task(tasklet, &tq_immediate); -+ mark_bh(IMMEDIATE_BH); -+} -+ -+static inline void tasklet_init(struct tasklet_struct *tasklet, -+ void (*func)(unsigned long), -+ unsigned long data) -+{ -+ tasklet->next = NULL; -+ tasklet->sync = 0; -+ tasklet->routine = (void (*)(void *))func; -+ tasklet->data = (void *)data; -+} -+#define tasklet_kill(tasklet) { do{} while (0); } -+ -+/* 2.4.x introduced del_timer_sync() */ -+#define del_timer_sync(timer) del_timer(timer) -+ -+#else -+ -+#define netif_down(dev) -+ -+#endif /* SoftNet */ -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 3)) -+ -+/* -+ * Emit code to initialise a tq_struct's routine and data pointers -+ */ -+#define PREPARE_TQUEUE(_tq, _routine, _data) \ -+ do { \ -+ (_tq)->routine = _routine; \ -+ (_tq)->data = _data; \ -+ } while (0) -+ -+/* -+ * Emit code to initialise all of a tq_struct -+ */ -+#define INIT_TQUEUE(_tq, _routine, _data) \ -+ do { \ -+ INIT_LIST_HEAD(&(_tq)->list); \ -+ (_tq)->sync = 0; \ -+ PREPARE_TQUEUE((_tq), (_routine), (_data)); \ -+ } while (0) -+ -+#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 3) */ -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 6)) -+ -+/* Power management related routines */ -+ -+static inline int -+pci_save_state(struct pci_dev *dev, u32 *buffer) -+{ -+ int i; -+ if (buffer) { -+ for (i = 0; i < 16; i++) -+ pci_read_config_dword(dev, i * 4, &buffer[i]); -+ } -+ return 0; -+} -+ -+static inline int -+pci_restore_state(struct pci_dev *dev, u32 *buffer) -+{ -+ int i; -+ -+ if (buffer) { -+ for (i = 0; i < 16; i++) -+ pci_write_config_dword(dev, i * 4, buffer[i]); -+ } -+ /* -+ * otherwise, write the context information we know from bootup. -+ * This works around a problem where warm-booting from Windows -+ * combined with a D3(hot)->D0 transition causes PCI config -+ * header data to be forgotten. -+ */ -+ else { -+ for (i = 0; i < 6; i ++) -+ pci_write_config_dword(dev, -+ PCI_BASE_ADDRESS_0 + (i * 4), -+ pci_resource_start(dev, i)); -+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); -+ } -+ return 0; -+} -+ -+#endif /* PCI power management */ -+ -+/* Old cp0 access macros deprecated in 2.4.19 */ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 19)) -+#define read_c0_count() read_32bit_cp0_register(CP0_COUNT) -+#endif -+ -+/* Module refcount handled internally in 2.6.x */ -+#ifndef SET_MODULE_OWNER -+#define SET_MODULE_OWNER(dev) do {} while (0) -+#define OLD_MOD_INC_USE_COUNT MOD_INC_USE_COUNT -+#define OLD_MOD_DEC_USE_COUNT MOD_DEC_USE_COUNT -+#else -+#define OLD_MOD_INC_USE_COUNT do {} while (0) -+#define OLD_MOD_DEC_USE_COUNT do {} while (0) -+#endif -+ -+#ifndef SET_NETDEV_DEV -+#define SET_NETDEV_DEV(net, pdev) do {} while (0) -+#endif -+ -+#ifndef HAVE_FREE_NETDEV -+#define free_netdev(dev) kfree(dev) -+#endif -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0)) -+/* struct packet_type redefined in 2.6.x */ -+#define af_packet_priv data -+#endif -+ -+#endif /* _linuxver_h_ */ -diff -urN linux.old/arch/mips/bcm947xx/include/mipsinc.h linux.dev/arch/mips/bcm947xx/include/mipsinc.h ---- linux.old/arch/mips/bcm947xx/include/mipsinc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/mipsinc.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,541 @@ -+/* -+ * HND Run Time Environment for standalone MIPS programs. -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: mipsinc.h,v 1.1.1.5 2006/02/27 03:43:16 honor Exp $ -+ */ -+ -+#ifndef _MISPINC_H -+#define _MISPINC_H -+ -+ -+/* MIPS defines */ -+ -+#ifdef _LANGUAGE_ASSEMBLY -+ -+/* -+ * Symbolic register names for 32 bit ABI -+ */ -+#define zero $0 /* wired zero */ -+#define AT $1 /* assembler temp - uppercase because of ".set at" */ -+#define v0 $2 /* return value */ -+#define v1 $3 -+#define a0 $4 /* argument registers */ -+#define a1 $5 -+#define a2 $6 -+#define a3 $7 -+#define t0 $8 /* caller saved */ -+#define t1 $9 -+#define t2 $10 -+#define t3 $11 -+#define t4 $12 -+#define t5 $13 -+#define t6 $14 -+#define t7 $15 -+#define s0 $16 /* callee saved */ -+#define s1 $17 -+#define s2 $18 -+#define s3 $19 -+#define s4 $20 -+#define s5 $21 -+#define s6 $22 -+#define s7 $23 -+#define t8 $24 /* caller saved */ -+#define t9 $25 -+#define jp $25 /* PIC jump register */ -+#define k0 $26 /* kernel scratch */ -+#define k1 $27 -+#define gp $28 /* global pointer */ -+#define sp $29 /* stack pointer */ -+#define fp $30 /* frame pointer */ -+#define s8 $30 /* same like fp! */ -+#define ra $31 /* return address */ -+ -+ -+/* CP0 Registers */ -+ -+#define C0_INX $0 -+#define C0_RAND $1 -+#define C0_TLBLO0 $2 -+#define C0_TLBLO C0_TLBLO0 -+#define C0_TLBLO1 $3 -+#define C0_CTEXT $4 -+#define C0_PGMASK $5 -+#define C0_WIRED $6 -+#define C0_BADVADDR $8 -+#define C0_COUNT $9 -+#define C0_TLBHI $10 -+#define C0_COMPARE $11 -+#define C0_SR $12 -+#define C0_STATUS C0_SR -+#define C0_CAUSE $13 -+#define C0_EPC $14 -+#define C0_PRID $15 -+#define C0_CONFIG $16 -+#define C0_LLADDR $17 -+#define C0_WATCHLO $18 -+#define C0_WATCHHI $19 -+#define C0_XCTEXT $20 -+#define C0_DIAGNOSTIC $22 -+#define C0_BROADCOM C0_DIAGNOSTIC -+#define C0_PERFORMANCE $25 -+#define C0_ECC $26 -+#define C0_CACHEERR $27 -+#define C0_TAGLO $28 -+#define C0_TAGHI $29 -+#define C0_ERREPC $30 -+#define C0_DESAVE $31 -+ -+/* -+ * LEAF - declare leaf routine -+ */ -+#define LEAF(symbol) \ -+ .globl symbol; \ -+ .align 2; \ -+ .type symbol, @function; \ -+ .ent symbol, 0; \ -+symbol: .frame sp, 0, ra -+ -+/* -+ * END - mark end of function -+ */ -+#define END(function) \ -+ .end function; \ -+ .size function, . - function -+ -+#define _ULCAST_ -+ -+#define MFC0_SEL(dst, src, sel) \ -+ .word\t(0x40000000 | ((dst) << 16) | ((src) << 11) | (sel)) -+ -+ -+#define MTC0_SEL(dst, src, sel) \ -+ .word\t(0x40800000 | ((dst) << 16) | ((src) << 11) | (sel)) -+ -+#else -+ -+/* -+ * The following macros are especially useful for __asm__ -+ * inline assembler. -+ */ -+#ifndef __STR -+#define __STR(x) #x -+#endif -+#ifndef STR -+#define STR(x) __STR(x) -+#endif -+ -+#define _ULCAST_ (unsigned long) -+ -+ -+/* CP0 Registers */ -+ -+#define C0_INX 0 /* CP0: TLB Index */ -+#define C0_RAND 1 /* CP0: TLB Random */ -+#define C0_TLBLO0 2 /* CP0: TLB EntryLo0 */ -+#define C0_TLBLO C0_TLBLO0 /* CP0: TLB EntryLo0 */ -+#define C0_TLBLO1 3 /* CP0: TLB EntryLo1 */ -+#define C0_CTEXT 4 /* CP0: Context */ -+#define C0_PGMASK 5 /* CP0: TLB PageMask */ -+#define C0_WIRED 6 /* CP0: TLB Wired */ -+#define C0_BADVADDR 8 /* CP0: Bad Virtual Address */ -+#define C0_COUNT 9 /* CP0: Count */ -+#define C0_TLBHI 10 /* CP0: TLB EntryHi */ -+#define C0_COMPARE 11 /* CP0: Compare */ -+#define C0_SR 12 /* CP0: Processor Status */ -+#define C0_STATUS C0_SR /* CP0: Processor Status */ -+#define C0_CAUSE 13 /* CP0: Exception Cause */ -+#define C0_EPC 14 /* CP0: Exception PC */ -+#define C0_PRID 15 /* CP0: Processor Revision Indentifier */ -+#define C0_CONFIG 16 /* CP0: Config */ -+#define C0_LLADDR 17 /* CP0: LLAddr */ -+#define C0_WATCHLO 18 /* CP0: WatchpointLo */ -+#define C0_WATCHHI 19 /* CP0: WatchpointHi */ -+#define C0_XCTEXT 20 /* CP0: XContext */ -+#define C0_DIAGNOSTIC 22 /* CP0: Diagnostic */ -+#define C0_BROADCOM C0_DIAGNOSTIC /* CP0: Broadcom Register */ -+#define C0_PERFORMANCE 25 /* CP0: Performance Counter/Control Registers */ -+#define C0_ECC 26 /* CP0: ECC */ -+#define C0_CACHEERR 27 /* CP0: CacheErr */ -+#define C0_TAGLO 28 /* CP0: TagLo */ -+#define C0_TAGHI 29 /* CP0: TagHi */ -+#define C0_ERREPC 30 /* CP0: ErrorEPC */ -+#define C0_DESAVE 31 /* CP0: DebugSave */ -+ -+#endif /* _LANGUAGE_ASSEMBLY */ -+ -+/* -+ * Memory segments (32bit kernel mode addresses) -+ */ -+#undef KUSEG -+#undef KSEG0 -+#undef KSEG1 -+#undef KSEG2 -+#undef KSEG3 -+#define KUSEG 0x00000000 -+#define KSEG0 0x80000000 -+#define KSEG1 0xa0000000 -+#define KSEG2 0xc0000000 -+#define KSEG3 0xe0000000 -+#define PHYSADDR_MASK 0x1fffffff -+ -+/* -+ * Map an address to a certain kernel segment -+ */ -+#undef PHYSADDR -+#undef KSEG0ADDR -+#undef KSEG1ADDR -+#undef KSEG2ADDR -+#undef KSEG3ADDR -+ -+#define PHYSADDR(a) (_ULCAST_(a) & PHYSADDR_MASK) -+#define KSEG0ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG0) -+#define KSEG1ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG1) -+#define KSEG2ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG2) -+#define KSEG3ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG3) -+ -+ -+#ifndef Index_Invalidate_I -+/* -+ * Cache Operations -+ */ -+#define Index_Invalidate_I 0x00 -+#define Index_Writeback_Inv_D 0x01 -+#define Index_Invalidate_SI 0x02 -+#define Index_Writeback_Inv_SD 0x03 -+#define Index_Load_Tag_I 0x04 -+#define Index_Load_Tag_D 0x05 -+#define Index_Load_Tag_SI 0x06 -+#define Index_Load_Tag_SD 0x07 -+#define Index_Store_Tag_I 0x08 -+#define Index_Store_Tag_D 0x09 -+#define Index_Store_Tag_SI 0x0A -+#define Index_Store_Tag_SD 0x0B -+#define Create_Dirty_Excl_D 0x0d -+#define Create_Dirty_Excl_SD 0x0f -+#define Hit_Invalidate_I 0x10 -+#define Hit_Invalidate_D 0x11 -+#define Hit_Invalidate_SI 0x12 -+#define Hit_Invalidate_SD 0x13 -+#define Fill_I 0x14 -+#define Hit_Writeback_Inv_D 0x15 -+ /* 0x16 is unused */ -+#define Hit_Writeback_Inv_SD 0x17 -+#define R5K_Page_Invalidate_S 0x17 -+#define Hit_Writeback_I 0x18 -+#define Hit_Writeback_D 0x19 -+ /* 0x1a is unused */ -+#define Hit_Writeback_SD 0x1b -+ /* 0x1c is unused */ -+ /* 0x1e is unused */ -+#define Hit_Set_Virtual_SI 0x1e -+#define Hit_Set_Virtual_SD 0x1f -+#endif /* !Index_Invalidate_I */ -+ -+ -+/* -+ * R4x00 interrupt enable / cause bits -+ */ -+#define IE_SW0 (_ULCAST_(1) << 8) -+#define IE_SW1 (_ULCAST_(1) << 9) -+#define IE_IRQ0 (_ULCAST_(1) << 10) -+#define IE_IRQ1 (_ULCAST_(1) << 11) -+#define IE_IRQ2 (_ULCAST_(1) << 12) -+#define IE_IRQ3 (_ULCAST_(1) << 13) -+#define IE_IRQ4 (_ULCAST_(1) << 14) -+#define IE_IRQ5 (_ULCAST_(1) << 15) -+ -+#ifndef ST0_UM -+/* -+ * Bitfields in the mips32 cp0 status register -+ */ -+#define ST0_IE 0x00000001 -+#define ST0_EXL 0x00000002 -+#define ST0_ERL 0x00000004 -+#define ST0_UM 0x00000010 -+#define ST0_SWINT0 0x00000100 -+#define ST0_SWINT1 0x00000200 -+#define ST0_HWINT0 0x00000400 -+#define ST0_HWINT1 0x00000800 -+#define ST0_HWINT2 0x00001000 -+#define ST0_HWINT3 0x00002000 -+#define ST0_HWINT4 0x00004000 -+#define ST0_HWINT5 0x00008000 -+#define ST0_IM 0x0000ff00 -+#define ST0_NMI 0x00080000 -+#define ST0_SR 0x00100000 -+#define ST0_TS 0x00200000 -+#define ST0_BEV 0x00400000 -+#define ST0_RE 0x02000000 -+#define ST0_RP 0x08000000 -+#define ST0_CU 0xf0000000 -+#define ST0_CU0 0x10000000 -+#define ST0_CU1 0x20000000 -+#define ST0_CU2 0x40000000 -+#define ST0_CU3 0x80000000 -+#endif /* !ST0_UM */ -+ -+ -+/* -+ * Bitfields in the mips32 cp0 cause register -+ */ -+#define C_EXC 0x0000007c -+#define C_EXC_SHIFT 2 -+#define C_INT 0x0000ff00 -+#define C_INT_SHIFT 8 -+#define C_SW0 (_ULCAST_(1) << 8) -+#define C_SW1 (_ULCAST_(1) << 9) -+#define C_IRQ0 (_ULCAST_(1) << 10) -+#define C_IRQ1 (_ULCAST_(1) << 11) -+#define C_IRQ2 (_ULCAST_(1) << 12) -+#define C_IRQ3 (_ULCAST_(1) << 13) -+#define C_IRQ4 (_ULCAST_(1) << 14) -+#define C_IRQ5 (_ULCAST_(1) << 15) -+#define C_WP 0x00400000 -+#define C_IV 0x00800000 -+#define C_CE 0x30000000 -+#define C_CE_SHIFT 28 -+#define C_BD 0x80000000 -+ -+/* Values in C_EXC */ -+#define EXC_INT 0 -+#define EXC_TLBM 1 -+#define EXC_TLBL 2 -+#define EXC_TLBS 3 -+#define EXC_AEL 4 -+#define EXC_AES 5 -+#define EXC_IBE 6 -+#define EXC_DBE 7 -+#define EXC_SYS 8 -+#define EXC_BPT 9 -+#define EXC_RI 10 -+#define EXC_CU 11 -+#define EXC_OV 12 -+#define EXC_TR 13 -+#define EXC_WATCH 23 -+#define EXC_MCHK 24 -+ -+ -+/* -+ * Bits in the cp0 config register. -+ */ -+#define CONF_CM_CACHABLE_NO_WA 0 -+#define CONF_CM_CACHABLE_WA 1 -+#define CONF_CM_UNCACHED 2 -+#define CONF_CM_CACHABLE_NONCOHERENT 3 -+#define CONF_CM_CACHABLE_CE 4 -+#define CONF_CM_CACHABLE_COW 5 -+#define CONF_CM_CACHABLE_CUW 6 -+#define CONF_CM_CACHABLE_ACCELERATED 7 -+#define CONF_CM_CMASK 7 -+#define CONF_CU (_ULCAST_(1) << 3) -+#define CONF_DB (_ULCAST_(1) << 4) -+#define CONF_IB (_ULCAST_(1) << 5) -+#define CONF_SE (_ULCAST_(1) << 12) -+#ifndef CONF_BE /* duplicate in mipsregs.h */ -+#define CONF_BE (_ULCAST_(1) << 15) -+#endif -+#define CONF_SC (_ULCAST_(1) << 17) -+#define CONF_AC (_ULCAST_(1) << 23) -+#define CONF_HALT (_ULCAST_(1) << 25) -+#ifndef CONF_M /* duplicate in mipsregs.h */ -+#define CONF_M (_ULCAST_(1) << 31) -+#endif -+ -+ -+/* -+ * Bits in the cp0 config register select 1. -+ */ -+#define CONF1_FP 0x00000001 /* FPU present */ -+#define CONF1_EP 0x00000002 /* EJTAG present */ -+#define CONF1_CA 0x00000004 /* mips16 implemented */ -+#define CONF1_WR 0x00000008 /* Watch registers present */ -+#define CONF1_PC 0x00000010 /* Performance counters present */ -+#define CONF1_DA_SHIFT 7 /* D$ associativity */ -+#define CONF1_DA_MASK 0x00000380 -+#define CONF1_DA_BASE 1 -+#define CONF1_DL_SHIFT 10 /* D$ line size */ -+#define CONF1_DL_MASK 0x00001c00 -+#define CONF1_DL_BASE 2 -+#define CONF1_DS_SHIFT 13 /* D$ sets/way */ -+#define CONF1_DS_MASK 0x0000e000 -+#define CONF1_DS_BASE 64 -+#define CONF1_IA_SHIFT 16 /* I$ associativity */ -+#define CONF1_IA_MASK 0x00070000 -+#define CONF1_IA_BASE 1 -+#define CONF1_IL_SHIFT 19 /* I$ line size */ -+#define CONF1_IL_MASK 0x00380000 -+#define CONF1_IL_BASE 2 -+#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */ -+#define CONF1_IS_MASK 0x01c00000 -+#define CONF1_IS_BASE 64 -+#define CONF1_MS_MASK 0x7e000000 /* Number of tlb entries */ -+#define CONF1_MS_SHIFT 25 -+ -+/* PRID register */ -+#define PRID_COPT_MASK 0xff000000 -+#define PRID_COMP_MASK 0x00ff0000 -+#define PRID_IMP_MASK 0x0000ff00 -+#define PRID_REV_MASK 0x000000ff -+ -+#define PRID_COMP_LEGACY 0x000000 -+#define PRID_COMP_MIPS 0x010000 -+#define PRID_COMP_BROADCOM 0x020000 -+#define PRID_COMP_ALCHEMY 0x030000 -+#define PRID_COMP_SIBYTE 0x040000 -+#define PRID_IMP_BCM4710 0x4000 -+#define PRID_IMP_BCM3302 0x9000 -+#define PRID_IMP_BCM3303 0x9100 -+ -+#define PRID_IMP_UNKNOWN 0xff00 -+ -+#define BCM330X(id) \ -+ (((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == \ -+ (PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) || \ -+ ((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == \ -+ (PRID_COMP_BROADCOM | PRID_IMP_BCM3303))) -+ -+/* Bits in C0_BROADCOM */ -+#define BRCM_PFC_AVAIL 0x20000000 /* PFC is available */ -+#define BRCM_DC_ENABLE 0x40000000 /* Enable Data $ */ -+#define BRCM_IC_ENABLE 0x80000000 /* Enable Instruction $ */ -+#define BRCM_PFC_ENABLE 0x00400000 /* Obsolete? Enable PFC (at least on 4310) */ -+#define BRCM_CLF_ENABLE 0x00100000 /* Enable cache line first feature */ -+ -+/* PreFetch Cache aka Read Ahead Cache */ -+ -+#define PFC_CR0 0xff400000 /* control reg 0 */ -+#define PFC_CR1 0xff400004 /* control reg 1 */ -+ -+/* PFC operations */ -+#define PFC_I 0x00000001 /* Enable PFC use for instructions */ -+#define PFC_D 0x00000002 /* Enable PFC use for data */ -+#define PFC_PFI 0x00000004 /* Enable seq. prefetch for instructions */ -+#define PFC_PFD 0x00000008 /* Enable seq. prefetch for data */ -+#define PFC_CINV 0x00000010 /* Enable selective (i/d) cacheop flushing */ -+#define PFC_NCH 0x00000020 /* Disable flushing based on cacheops */ -+#define PFC_DPF 0x00000040 /* Enable directional prefetching */ -+#define PFC_FLUSH 0x00000100 /* Flush the PFC */ -+#define PFC_BRR 0x40000000 /* Bus error indication */ -+#define PFC_PWR 0x80000000 /* Disable power saving (clock gating) */ -+ -+/* Handy defaults */ -+#define PFC_DISABLED 0 -+#define PFC_AUTO 0xffffffff /* auto select the default mode */ -+#define PFC_INST (PFC_I | PFC_PFI | PFC_CINV) -+#define PFC_INST_NOPF (PFC_I | PFC_CINV) -+#define PFC_DATA (PFC_D | PFC_PFD | PFC_CINV) -+#define PFC_DATA_NOPF (PFC_D | PFC_CINV) -+#define PFC_I_AND_D (PFC_INST | PFC_DATA) -+#define PFC_I_AND_D_NOPF (PFC_INST_NOPF | PFC_DATA_NOPF) -+ -+#ifndef _LANGUAGE_ASSEMBLY -+ -+/* -+ * Macros to access the system control coprocessor -+ */ -+ -+#define MFC0(source, sel) \ -+({ \ -+ int __res; \ -+ __asm__ __volatile__(" \ -+ .set\tnoreorder; \ -+ .set\tnoat; \ -+ .word\t"STR(0x40010000 | ((source) << 11) | (sel))"; \ -+ move\t%0, $1; \ -+ .set\tat; \ -+ .set\treorder" \ -+ :"=r" (__res) \ -+ : \ -+ :"$1"); \ -+ __res; \ -+}) -+ -+#define MTC0(source, sel, value) \ -+do { \ -+ __asm__ __volatile__(" \ -+ .set\tnoreorder; \ -+ .set\tnoat; \ -+ move\t$1, %z0; \ -+ .word\t"STR(0x40810000 | ((source) << 11) | (sel))"; \ -+ .set\tat; \ -+ .set\treorder" \ -+ : \ -+ :"jr" (value) \ -+ :"$1"); \ -+} while (0) -+ -+#define get_c0_count() \ -+({ \ -+ int __res; \ -+ __asm__ __volatile__(" \ -+ .set\tnoreorder; \ -+ .set\tnoat; \ -+ mfc0\t%0, $9; \ -+ .set\tat; \ -+ .set\treorder" \ -+ :"=r" (__res)); \ -+ __res; \ -+}) -+ -+static INLINE void icache_probe(uint32 config1, uint *size, uint *lsize) -+{ -+ uint lsz, sets, ways; -+ -+ /* Instruction Cache Size = Associativity * Line Size * Sets Per Way */ -+ if ((lsz = ((config1 & CONF1_IL_MASK) >> CONF1_IL_SHIFT))) -+ lsz = CONF1_IL_BASE << lsz; -+ sets = CONF1_IS_BASE << ((config1 & CONF1_IS_MASK) >> CONF1_IS_SHIFT); -+ ways = CONF1_IA_BASE + ((config1 & CONF1_IA_MASK) >> CONF1_IA_SHIFT); -+ *size = lsz * sets * ways; -+ *lsize = lsz; -+} -+ -+static INLINE void dcache_probe(uint32 config1, uint *size, uint *lsize) -+{ -+ uint lsz, sets, ways; -+ -+ /* Data Cache Size = Associativity * Line Size * Sets Per Way */ -+ if ((lsz = ((config1 & CONF1_DL_MASK) >> CONF1_DL_SHIFT))) -+ lsz = CONF1_DL_BASE << lsz; -+ sets = CONF1_DS_BASE << ((config1 & CONF1_DS_MASK) >> CONF1_DS_SHIFT); -+ ways = CONF1_DA_BASE + ((config1 & CONF1_DA_MASK) >> CONF1_DA_SHIFT); -+ *size = lsz * sets * ways; -+ *lsize = lsz; -+} -+ -+#define cache_op(base, op) \ -+ __asm__ __volatile__(" \ -+ .set noreorder; \ -+ .set mips3; \ -+ cache %1, (%0); \ -+ .set mips0; \ -+ .set reorder" \ -+ : \ -+ : "r" (base), \ -+ "i" (op)); -+ -+#define cache_unroll4(base, delta, op) \ -+ __asm__ __volatile__(" \ -+ .set noreorder; \ -+ .set mips3; \ -+ cache %1, 0(%0); \ -+ cache %1, delta(%0); \ -+ cache %1, (2 * delta)(%0); \ -+ cache %1, (3 * delta)(%0); \ -+ .set mips0; \ -+ .set reorder" \ -+ : \ -+ : "r" (base), \ -+ "i" (op)); -+ -+#endif /* !_LANGUAGE_ASSEMBLY */ -+ -+#endif /* _MISPINC_H */ -diff -urN linux.old/arch/mips/bcm947xx/include/osl.h linux.dev/arch/mips/bcm947xx/include/osl.h ---- linux.old/arch/mips/bcm947xx/include/osl.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/osl.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,181 @@ -+#ifndef __osl_h -+#define __osl_h -+ -+#include <linux/delay.h> -+#include <typedefs.h> -+#include <linuxver.h> -+#include <bcmutils.h> -+#include <pcicfg.h> -+ -+#define ASSERT(n) -+ -+/* Pkttag flag should be part of public information */ -+typedef struct { -+ bool pkttag; -+ uint pktalloced; /* Number of allocated packet buffers */ -+ void *tx_fn; -+ void *tx_ctx; -+} osl_pubinfo_t; -+ -+struct osl_info { -+ osl_pubinfo_t pub; -+ uint magic; -+ void *pdev; -+ uint malloced; -+ uint failed; -+ void *dbgmem_list; -+}; -+ -+typedef struct osl_info osl_t; -+ -+#define PCI_CFG_RETRY 10 -+ -+/* map/unmap direction */ -+#define DMA_TX 1 /* TX direction for DMA */ -+#define DMA_RX 2 /* RX direction for DMA */ -+ -+#define AND_REG(osh, r, v) W_REG(osh, (r), R_REG(osh, r) & (v)) -+#define OR_REG(osh, r, v) W_REG(osh, (r), R_REG(osh, r) | (v)) -+#define SET_REG(osh, r, mask, val) W_REG((osh), (r), ((R_REG((osh), r) & ~(mask)) | (val))) -+ -+/* bcopy, bcmp, and bzero */ -+#define bcopy(src, dst, len) memcpy((dst), (src), (len)) -+#define bcmp(b1, b2, len) memcmp((b1), (b2), (len)) -+#define bzero(b, len) memset((b), '\0', (len)) -+ -+/* uncached virtual address */ -+#ifdef mips -+#define OSL_UNCACHED(va) KSEG1ADDR((va)) -+#include <asm/addrspace.h> -+#else -+#define OSL_UNCACHED(va) (va) -+#endif /* mips */ -+ -+ -+#ifndef IL_BIGENDIAN -+#define R_REG(osh, r) (\ -+ sizeof(*(r)) == sizeof(uint8) ? readb((volatile uint8*)(r)) : \ -+ sizeof(*(r)) == sizeof(uint16) ? readw((volatile uint16*)(r)) : \ -+ readl((volatile uint32*)(r)) \ -+) -+#define W_REG(osh, r, v) do { \ -+ switch (sizeof(*(r))) { \ -+ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)(r)); break; \ -+ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)(r)); break; \ -+ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \ -+ } \ -+} while (0) -+#else /* IL_BIGENDIAN */ -+#define R_REG(osh, r) ({ \ -+ __typeof(*(r)) __osl_v; \ -+ switch (sizeof(*(r))) { \ -+ case sizeof(uint8): __osl_v = readb((volatile uint8*)((uint32)r^3)); break; \ -+ case sizeof(uint16): __osl_v = readw((volatile uint16*)((uint32)r^2)); break; \ -+ case sizeof(uint32): __osl_v = readl((volatile uint32*)(r)); break; \ -+ } \ -+ __osl_v; \ -+}) -+#define W_REG(osh, r, v) do { \ -+ switch (sizeof(*(r))) { \ -+ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)((uint32)r^3)); break; \ -+ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)((uint32)r^2)); break; \ -+ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \ -+ } \ -+} while (0) -+#endif /* IL_BIGENDIAN */ -+ -+/* dereference an address that may cause a bus exception */ -+#define BUSPROBE(val, addr) get_dbe((val), (addr)) -+#include <asm/paccess.h> -+ -+/* map/unmap physical to virtual I/O */ -+#define REG_MAP(pa, size) ioremap_nocache((unsigned long)(pa), (unsigned long)(size)) -+#define REG_UNMAP(va) iounmap((void *)(va)) -+ -+/* shared (dma-able) memory access macros */ -+#define R_SM(r) *(r) -+#define W_SM(r, v) (*(r) = (v)) -+#define BZERO_SM(r, len) memset((r), '\0', (len)) -+ -+#define MALLOC(osh, size) kmalloc((size), GFP_ATOMIC) -+#define MFREE(osh, addr, size) kfree((addr)) -+#define MALLOCED(osh) (0) -+ -+#define osl_delay OSL_DELAY -+static inline void OSL_DELAY(uint usec) -+{ -+ uint d; -+ -+ while (usec > 0) { -+ d = MIN(usec, 1000); -+ udelay(d); -+ usec -= d; -+ } -+} -+ -+static inline void -+bcm_mdelay(uint ms) -+{ -+ uint i; -+ -+ for (i = 0; i < ms; i++) { -+ OSL_DELAY(1000); -+ } -+} -+ -+ -+#define OSL_PCMCIA_READ_ATTR(osh, offset, buf, size) -+#define OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size) -+ -+#define OSL_PCI_READ_CONFIG(osh, offset, size) \ -+ osl_pci_read_config((osh), (offset), (size)) -+ -+static inline uint32 -+osl_pci_read_config(osl_t *osh, uint offset, uint size) -+{ -+ uint val; -+ uint retry = PCI_CFG_RETRY; -+ -+ do { -+ pci_read_config_dword(osh->pdev, offset, &val); -+ if (val != 0xffffffff) -+ break; -+ } while (retry--); -+ -+ return (val); -+} -+ -+#define OSL_PCI_WRITE_CONFIG(osh, offset, size, val) \ -+ osl_pci_write_config((osh), (offset), (size), (val)) -+static inline void -+osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val) -+{ -+ uint retry = PCI_CFG_RETRY; -+ -+ do { -+ pci_write_config_dword(osh->pdev, offset, val); -+ if (offset != PCI_BAR0_WIN) -+ break; -+ if (osl_pci_read_config(osh, offset, size) == val) -+ break; -+ } while (retry--); -+} -+ -+ -+/* return bus # for the pci device pointed by osh->pdev */ -+#define OSL_PCI_BUS(osh) osl_pci_bus(osh) -+static inline uint -+osl_pci_bus(osl_t *osh) -+{ -+ return ((struct pci_dev *)osh->pdev)->bus->number; -+} -+ -+/* return slot # for the pci device pointed by osh->pdev */ -+#define OSL_PCI_SLOT(osh) osl_pci_slot(osh) -+static inline uint -+osl_pci_slot(osl_t *osh) -+{ -+ return PCI_SLOT(((struct pci_dev *)osh->pdev)->devfn); -+} -+ -+#endif -diff -urN linux.old/arch/mips/bcm947xx/include/pcicfg.h linux.dev/arch/mips/bcm947xx/include/pcicfg.h ---- linux.old/arch/mips/bcm947xx/include/pcicfg.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/pcicfg.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,495 @@ -+/* -+ * pcicfg.h: PCI configuration constants and structures. -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: pcicfg.h,v 1.1.1.11 2006/04/08 06:13:40 honor Exp $ -+ */ -+ -+#ifndef _h_pcicfg_ -+#define _h_pcicfg_ -+ -+/* The following inside ifndef's so we don't collide with NTDDK.H */ -+#ifndef PCI_MAX_BUS -+#define PCI_MAX_BUS 0x100 -+#endif -+#ifndef PCI_MAX_DEVICES -+#define PCI_MAX_DEVICES 0x20 -+#endif -+#ifndef PCI_MAX_FUNCTION -+#define PCI_MAX_FUNCTION 0x8 -+#endif -+ -+#ifndef PCI_INVALID_VENDORID -+#define PCI_INVALID_VENDORID 0xffff -+#endif -+#ifndef PCI_INVALID_DEVICEID -+#define PCI_INVALID_DEVICEID 0xffff -+#endif -+ -+ -+/* Convert between bus-slot-function-register and config addresses */ -+ -+#define PCICFG_BUS_SHIFT 16 /* Bus shift */ -+#define PCICFG_SLOT_SHIFT 11 /* Slot shift */ -+#define PCICFG_FUN_SHIFT 8 /* Function shift */ -+#define PCICFG_OFF_SHIFT 0 /* Register shift */ -+ -+#define PCICFG_BUS_MASK 0xff /* Bus mask */ -+#define PCICFG_SLOT_MASK 0x1f /* Slot mask */ -+#define PCICFG_FUN_MASK 7 /* Function mask */ -+#define PCICFG_OFF_MASK 0xff /* Bus mask */ -+ -+#define PCI_CONFIG_ADDR(b, s, f, o) \ -+ ((((b) & PCICFG_BUS_MASK) << PCICFG_BUS_SHIFT) \ -+ | (((s) & PCICFG_SLOT_MASK) << PCICFG_SLOT_SHIFT) \ -+ | (((f) & PCICFG_FUN_MASK) << PCICFG_FUN_SHIFT) \ -+ | (((o) & PCICFG_OFF_MASK) << PCICFG_OFF_SHIFT)) -+ -+#define PCI_CONFIG_BUS(a) (((a) >> PCICFG_BUS_SHIFT) & PCICFG_BUS_MASK) -+#define PCI_CONFIG_SLOT(a) (((a) >> PCICFG_SLOT_SHIFT) & PCICFG_SLOT_MASK) -+#define PCI_CONFIG_FUN(a) (((a) >> PCICFG_FUN_SHIFT) & PCICFG_FUN_MASK) -+#define PCI_CONFIG_OFF(a) (((a) >> PCICFG_OFF_SHIFT) & PCICFG_OFF_MASK) -+ -+/* PCIE Config space accessing MACROS */ -+ -+#define PCIECFG_BUS_SHIFT 24 /* Bus shift */ -+#define PCIECFG_SLOT_SHIFT 19 /* Slot/Device shift */ -+#define PCIECFG_FUN_SHIFT 16 /* Function shift */ -+#define PCIECFG_OFF_SHIFT 0 /* Register shift */ -+ -+#define PCIECFG_BUS_MASK 0xff /* Bus mask */ -+#define PCIECFG_SLOT_MASK 0x1f /* Slot/Device mask */ -+#define PCIECFG_FUN_MASK 7 /* Function mask */ -+#define PCIECFG_OFF_MASK 0x3ff /* Register mask */ -+ -+#define PCIE_CONFIG_ADDR(b, s, f, o) \ -+ ((((b) & PCIECFG_BUS_MASK) << PCIECFG_BUS_SHIFT) \ -+ | (((s) & PCIECFG_SLOT_MASK) << PCIECFG_SLOT_SHIFT) \ -+ | (((f) & PCIECFG_FUN_MASK) << PCIECFG_FUN_SHIFT) \ -+ | (((o) & PCIECFG_OFF_MASK) << PCIECFG_OFF_SHIFT)) -+ -+#define PCIE_CONFIG_BUS(a) (((a) >> PCIECFG_BUS_SHIFT) & PCIECFG_BUS_MASK) -+#define PCIE_CONFIG_SLOT(a) (((a) >> PCIECFG_SLOT_SHIFT) & PCIECFG_SLOT_MASK) -+#define PCIE_CONFIG_FUN(a) (((a) >> PCIECFG_FUN_SHIFT) & PCIECFG_FUN_MASK) -+#define PCIE_CONFIG_OFF(a) (((a) >> PCIECFG_OFF_SHIFT) & PCIECFG_OFF_MASK) -+ -+/* The actual config space */ -+ -+#define PCI_BAR_MAX 6 -+ -+#define PCI_ROM_BAR 8 -+ -+#define PCR_RSVDA_MAX 2 -+ -+/* Bits in PCI bars' flags */ -+ -+#define PCIBAR_FLAGS 0xf -+#define PCIBAR_IO 0x1 -+#define PCIBAR_MEM1M 0x2 -+#define PCIBAR_MEM64 0x4 -+#define PCIBAR_PREFETCH 0x8 -+#define PCIBAR_MEM32_MASK 0xFFFFFF80 -+ -+/* pci config status reg has a bit to indicate that capability ptr is present */ -+ -+#define PCI_CAPPTR_PRESENT 0x0010 -+ -+typedef struct _pci_config_regs { -+ unsigned short vendor; -+ unsigned short device; -+ unsigned short command; -+ unsigned short status; -+ unsigned char rev_id; -+ unsigned char prog_if; -+ unsigned char sub_class; -+ unsigned char base_class; -+ unsigned char cache_line_size; -+ unsigned char latency_timer; -+ unsigned char header_type; -+ unsigned char bist; -+ unsigned long base[PCI_BAR_MAX]; -+ unsigned long cardbus_cis; -+ unsigned short subsys_vendor; -+ unsigned short subsys_id; -+ unsigned long baserom; -+ unsigned long rsvd_a[PCR_RSVDA_MAX]; -+ unsigned char int_line; -+ unsigned char int_pin; -+ unsigned char min_gnt; -+ unsigned char max_lat; -+ unsigned char dev_dep[192]; -+} pci_config_regs; -+ -+#define SZPCR (sizeof (pci_config_regs)) -+#define MINSZPCR 64 /* offsetof (dev_dep[0] */ -+ -+/* A structure for the config registers is nice, but in most -+ * systems the config space is not memory mapped, so we need -+ * filed offsetts. :-( -+ */ -+#define PCI_CFG_VID 0 -+#define PCI_CFG_DID 2 -+#define PCI_CFG_CMD 4 -+#define PCI_CFG_STAT 6 -+#define PCI_CFG_REV 8 -+#define PCI_CFG_PROGIF 9 -+#define PCI_CFG_SUBCL 0xa -+#define PCI_CFG_BASECL 0xb -+#define PCI_CFG_CLSZ 0xc -+#define PCI_CFG_LATTIM 0xd -+#define PCI_CFG_HDR 0xe -+#define PCI_CFG_BIST 0xf -+#define PCI_CFG_BAR0 0x10 -+#define PCI_CFG_BAR1 0x14 -+#define PCI_CFG_BAR2 0x18 -+#define PCI_CFG_BAR3 0x1c -+#define PCI_CFG_BAR4 0x20 -+#define PCI_CFG_BAR5 0x24 -+#define PCI_CFG_CIS 0x28 -+#define PCI_CFG_SVID 0x2c -+#define PCI_CFG_SSID 0x2e -+#define PCI_CFG_ROMBAR 0x30 -+#define PCI_CFG_CAPPTR 0x34 -+#define PCI_CFG_INT 0x3c -+#define PCI_CFG_PIN 0x3d -+#define PCI_CFG_MINGNT 0x3e -+#define PCI_CFG_MAXLAT 0x3f -+ -+#ifdef __NetBSD__ -+#undef PCI_CLASS_DISPLAY -+#undef PCI_CLASS_MEMORY -+#undef PCI_CLASS_BRIDGE -+#undef PCI_CLASS_INPUT -+#undef PCI_CLASS_DOCK -+#endif /* __NetBSD__ */ -+ -+/* Classes and subclasses */ -+ -+typedef enum { -+ PCI_CLASS_OLD = 0, -+ PCI_CLASS_DASDI, -+ PCI_CLASS_NET, -+ PCI_CLASS_DISPLAY, -+ PCI_CLASS_MMEDIA, -+ PCI_CLASS_MEMORY, -+ PCI_CLASS_BRIDGE, -+ PCI_CLASS_COMM, -+ PCI_CLASS_BASE, -+ PCI_CLASS_INPUT, -+ PCI_CLASS_DOCK, -+ PCI_CLASS_CPU, -+ PCI_CLASS_SERIAL, -+ PCI_CLASS_INTELLIGENT = 0xe, -+ PCI_CLASS_SATELLITE, -+ PCI_CLASS_CRYPT, -+ PCI_CLASS_DSP, -+ PCI_CLASS_XOR = 0xfe -+} pci_classes; -+ -+typedef enum { -+ PCI_DASDI_SCSI, -+ PCI_DASDI_IDE, -+ PCI_DASDI_FLOPPY, -+ PCI_DASDI_IPI, -+ PCI_DASDI_RAID, -+ PCI_DASDI_OTHER = 0x80 -+} pci_dasdi_subclasses; -+ -+typedef enum { -+ PCI_NET_ETHER, -+ PCI_NET_TOKEN, -+ PCI_NET_FDDI, -+ PCI_NET_ATM, -+ PCI_NET_OTHER = 0x80 -+} pci_net_subclasses; -+ -+typedef enum { -+ PCI_DISPLAY_VGA, -+ PCI_DISPLAY_XGA, -+ PCI_DISPLAY_3D, -+ PCI_DISPLAY_OTHER = 0x80 -+} pci_display_subclasses; -+ -+typedef enum { -+ PCI_MMEDIA_VIDEO, -+ PCI_MMEDIA_AUDIO, -+ PCI_MMEDIA_PHONE, -+ PCI_MEDIA_OTHER = 0x80 -+} pci_mmedia_subclasses; -+ -+typedef enum { -+ PCI_MEMORY_RAM, -+ PCI_MEMORY_FLASH, -+ PCI_MEMORY_OTHER = 0x80 -+} pci_memory_subclasses; -+ -+typedef enum { -+ PCI_BRIDGE_HOST, -+ PCI_BRIDGE_ISA, -+ PCI_BRIDGE_EISA, -+ PCI_BRIDGE_MC, -+ PCI_BRIDGE_PCI, -+ PCI_BRIDGE_PCMCIA, -+ PCI_BRIDGE_NUBUS, -+ PCI_BRIDGE_CARDBUS, -+ PCI_BRIDGE_RACEWAY, -+ PCI_BRIDGE_OTHER = 0x80 -+} pci_bridge_subclasses; -+ -+typedef enum { -+ PCI_COMM_UART, -+ PCI_COMM_PARALLEL, -+ PCI_COMM_MULTIUART, -+ PCI_COMM_MODEM, -+ PCI_COMM_OTHER = 0x80 -+} pci_comm_subclasses; -+ -+typedef enum { -+ PCI_BASE_PIC, -+ PCI_BASE_DMA, -+ PCI_BASE_TIMER, -+ PCI_BASE_RTC, -+ PCI_BASE_PCI_HOTPLUG, -+ PCI_BASE_OTHER = 0x80 -+} pci_base_subclasses; -+ -+typedef enum { -+ PCI_INPUT_KBD, -+ PCI_INPUT_PEN, -+ PCI_INPUT_MOUSE, -+ PCI_INPUT_SCANNER, -+ PCI_INPUT_GAMEPORT, -+ PCI_INPUT_OTHER = 0x80 -+} pci_input_subclasses; -+ -+typedef enum { -+ PCI_DOCK_GENERIC, -+ PCI_DOCK_OTHER = 0x80 -+} pci_dock_subclasses; -+ -+typedef enum { -+ PCI_CPU_386, -+ PCI_CPU_486, -+ PCI_CPU_PENTIUM, -+ PCI_CPU_ALPHA = 0x10, -+ PCI_CPU_POWERPC = 0x20, -+ PCI_CPU_MIPS = 0x30, -+ PCI_CPU_COPROC = 0x40, -+ PCI_CPU_OTHER = 0x80 -+} pci_cpu_subclasses; -+ -+typedef enum { -+ PCI_SERIAL_IEEE1394, -+ PCI_SERIAL_ACCESS, -+ PCI_SERIAL_SSA, -+ PCI_SERIAL_USB, -+ PCI_SERIAL_FIBER, -+ PCI_SERIAL_SMBUS, -+ PCI_SERIAL_OTHER = 0x80 -+} pci_serial_subclasses; -+ -+typedef enum { -+ PCI_INTELLIGENT_I2O -+} pci_intelligent_subclasses; -+ -+typedef enum { -+ PCI_SATELLITE_TV, -+ PCI_SATELLITE_AUDIO, -+ PCI_SATELLITE_VOICE, -+ PCI_SATELLITE_DATA, -+ PCI_SATELLITE_OTHER = 0x80 -+} pci_satellite_subclasses; -+ -+typedef enum { -+ PCI_CRYPT_NETWORK, -+ PCI_CRYPT_ENTERTAINMENT, -+ PCI_CRYPT_OTHER = 0x80 -+} pci_crypt_subclasses; -+ -+typedef enum { -+ PCI_DSP_DPIO, -+ PCI_DSP_OTHER = 0x80 -+} pci_dsp_subclasses; -+ -+typedef enum { -+ PCI_XOR_QDMA, -+ PCI_XOR_OTHER = 0x80 -+} pci_xor_subclasses; -+ -+/* Header types */ -+typedef enum { -+ PCI_HEADER_NORMAL, -+ PCI_HEADER_BRIDGE, -+ PCI_HEADER_CARDBUS -+} pci_header_types; -+ -+ -+/* Overlay for a PCI-to-PCI bridge */ -+ -+#define PPB_RSVDA_MAX 2 -+#define PPB_RSVDD_MAX 8 -+ -+typedef struct _ppb_config_regs { -+ unsigned short vendor; -+ unsigned short device; -+ unsigned short command; -+ unsigned short status; -+ unsigned char rev_id; -+ unsigned char prog_if; -+ unsigned char sub_class; -+ unsigned char base_class; -+ unsigned char cache_line_size; -+ unsigned char latency_timer; -+ unsigned char header_type; -+ unsigned char bist; -+ unsigned long rsvd_a[PPB_RSVDA_MAX]; -+ unsigned char prim_bus; -+ unsigned char sec_bus; -+ unsigned char sub_bus; -+ unsigned char sec_lat; -+ unsigned char io_base; -+ unsigned char io_lim; -+ unsigned short sec_status; -+ unsigned short mem_base; -+ unsigned short mem_lim; -+ unsigned short pf_mem_base; -+ unsigned short pf_mem_lim; -+ unsigned long pf_mem_base_hi; -+ unsigned long pf_mem_lim_hi; -+ unsigned short io_base_hi; -+ unsigned short io_lim_hi; -+ unsigned short subsys_vendor; -+ unsigned short subsys_id; -+ unsigned long rsvd_b; -+ unsigned char rsvd_c; -+ unsigned char int_pin; -+ unsigned short bridge_ctrl; -+ unsigned char chip_ctrl; -+ unsigned char diag_ctrl; -+ unsigned short arb_ctrl; -+ unsigned long rsvd_d[PPB_RSVDD_MAX]; -+ unsigned char dev_dep[192]; -+} ppb_config_regs; -+ -+ -+/* PCI CAPABILITY DEFINES */ -+#define PCI_CAP_POWERMGMTCAP_ID 0x01 -+#define PCI_CAP_MSICAP_ID 0x05 -+#define PCI_CAP_PCIECAP_ID 0x10 -+ -+/* Data structure to define the Message Signalled Interrupt facility -+ * Valid for PCI and PCIE configurations -+ */ -+typedef struct _pciconfig_cap_msi { -+ unsigned char capID; -+ unsigned char nextptr; -+ unsigned short msgctrl; -+ unsigned int msgaddr; -+} pciconfig_cap_msi; -+ -+/* Data structure to define the Power managment facility -+ * Valid for PCI and PCIE configurations -+ */ -+typedef struct _pciconfig_cap_pwrmgmt { -+ unsigned char capID; -+ unsigned char nextptr; -+ unsigned short pme_cap; -+ unsigned short pme_sts_ctrl; -+ unsigned char pme_bridge_ext; -+ unsigned char data; -+} pciconfig_cap_pwrmgmt; -+ -+/* Data structure to define the PCIE capability */ -+typedef struct _pciconfig_cap_pcie { -+ unsigned char capID; -+ unsigned char nextptr; -+ unsigned short pcie_cap; -+ unsigned int dev_cap; -+ unsigned short dev_ctrl; -+ unsigned short dev_status; -+ unsigned int link_cap; -+ unsigned short link_ctrl; -+ unsigned short link_status; -+} pciconfig_cap_pcie; -+ -+/* PCIE Enhanced CAPABILITY DEFINES */ -+#define PCIE_EXTCFG_OFFSET 0x100 -+#define PCIE_ADVERRREP_CAPID 0x0001 -+#define PCIE_VC_CAPID 0x0002 -+#define PCIE_DEVSNUM_CAPID 0x0003 -+#define PCIE_PWRBUDGET_CAPID 0x0004 -+ -+/* Header to define the PCIE specific capabilities in the extended config space */ -+typedef struct _pcie_enhanced_caphdr { -+ unsigned short capID; -+ unsigned short cap_ver : 4; -+ unsigned short next_ptr : 12; -+} pcie_enhanced_caphdr; -+ -+ -+/* Everything below is BRCM HND proprietary */ -+ -+ -+/* Brcm PCI configuration registers */ -+#define cap_list rsvd_a[0] -+#define bar0_window dev_dep[0x80 - 0x40] -+#define bar1_window dev_dep[0x84 - 0x40] -+#define sprom_control dev_dep[0x88 - 0x40] -+ -+#define PCI_BAR0_WIN 0x80 /* backplane addres space accessed by BAR0 */ -+#define PCI_BAR1_WIN 0x84 /* backplane addres space accessed by BAR1 */ -+#define PCI_SPROM_CONTROL 0x88 /* sprom property control */ -+#define PCI_BAR1_CONTROL 0x8c /* BAR1 region burst control */ -+#define PCI_INT_STATUS 0x90 /* PCI and other cores interrupts */ -+#define PCI_INT_MASK 0x94 /* mask of PCI and other cores interrupts */ -+#define PCI_TO_SB_MB 0x98 /* signal backplane interrupts */ -+#define PCI_BACKPLANE_ADDR 0xA0 /* address an arbitrary location on the system backplane */ -+#define PCI_BACKPLANE_DATA 0xA4 /* data at the location specified by above address */ -+#define PCI_GPIO_IN 0xb0 /* pci config space gpio input (>=rev3) */ -+#define PCI_GPIO_OUT 0xb4 /* pci config space gpio output (>=rev3) */ -+#define PCI_GPIO_OUTEN 0xb8 /* pci config space gpio output enable (>=rev3) */ -+ -+#define PCI_BAR0_SHADOW_OFFSET (2 * 1024) /* bar0 + 2K accesses sprom shadow (in pci core) */ -+#define PCI_BAR0_SPROM_OFFSET (4 * 1024) /* bar0 + 4K accesses external sprom */ -+#define PCI_BAR0_PCIREGS_OFFSET (6 * 1024) /* bar0 + 6K accesses pci core registers */ -+#define PCI_BAR0_PCISBR_OFFSET (4 * 1024) /* pci core SB registers are at the end of the -+ * 8KB window, so their address is the "regular" -+ * address plus 4K -+ */ -+#define PCI_BAR0_WINSZ 8192 /* bar0 window size */ -+ -+/* On pci corerev >= 13 and all pcie, the bar0 is now 16KB and it maps: */ -+#define PCI_16KB0_PCIREGS_OFFSET (8 * 1024) /* bar0 + 8K accesses pci/pcie core registers */ -+#define PCI_16KB0_CCREGS_OFFSET (12 * 1024) /* bar0 + 12K accesses chipc core registers */ -+#define PCI_16KBB0_WINSZ (16 * 1024) /* bar0 window size */ -+ -+/* PCI_INT_STATUS */ -+#define PCI_SBIM_STATUS_SERR 0x4 /* backplane SBErr interrupt status */ -+ -+/* PCI_INT_MASK */ -+#define PCI_SBIM_SHIFT 8 /* backplane core interrupt mask bits offset */ -+#define PCI_SBIM_MASK 0xff00 /* backplane core interrupt mask */ -+#define PCI_SBIM_MASK_SERR 0x4 /* backplane SBErr interrupt mask */ -+ -+/* PCI_SPROM_CONTROL */ -+#define SPROM_SZ_MSK 0x02 /* SPROM Size Mask */ -+#define SPROM_LOCKED 0x08 /* SPROM Locked */ -+#define SPROM_BLANK 0x04 /* indicating a blank SPROM */ -+#define SPROM_WRITEEN 0x10 /* SPROM write enable */ -+#define SPROM_BOOTROM_WE 0x20 /* external bootrom write enable */ -+#define SPROM_OTPIN_USE 0x80 /* device OTP In use */ -+ -+#define SPROM_SIZE 256 /* sprom size in 16-bit */ -+#define SPROM_CRC_RANGE 64 /* crc cover range in 16-bit */ -+ -+/* PCI_CFG_CMD_STAT */ -+#define PCI_CFG_CMD_STAT_TA 0x08000000 /* target abort status */ -+ -+#endif /* _h_pcicfg_ */ -diff -urN linux.old/arch/mips/bcm947xx/include/sbchipc.h linux.dev/arch/mips/bcm947xx/include/sbchipc.h ---- linux.old/arch/mips/bcm947xx/include/sbchipc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/sbchipc.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,516 @@ -+/* -+ * SiliconBackplane Chipcommon core hardware definitions. -+ * -+ * The chipcommon core provides chip identification, SB control, -+ * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer, -+ * gpio interface, extbus, and support for serial and parallel flashes. -+ * -+ * $Id: sbchipc.h,v 1.1.1.14 2006/04/15 01:29:08 michael Exp $ -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ */ -+ -+#ifndef _SBCHIPC_H -+#define _SBCHIPC_H -+ -+ -+#ifndef _LANGUAGE_ASSEMBLY -+ -+/* cpp contortions to concatenate w/arg prescan */ -+#ifndef PAD -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+#endif /* PAD */ -+ -+typedef volatile struct { -+ uint32 chipid; /* 0x0 */ -+ uint32 capabilities; -+ uint32 corecontrol; /* corerev >= 1 */ -+ uint32 bist; -+ -+ /* OTP */ -+ uint32 otpstatus; /* 0x10, corerev >= 10 */ -+ uint32 otpcontrol; -+ uint32 otpprog; -+ uint32 PAD; -+ -+ /* Interrupt control */ -+ uint32 intstatus; /* 0x20 */ -+ uint32 intmask; -+ uint32 chipcontrol; /* 0x28, rev >= 11 */ -+ uint32 chipstatus; /* 0x2c, rev >= 11 */ -+ -+ /* Jtag Master */ -+ uint32 jtagcmd; /* 0x30, rev >= 10 */ -+ uint32 jtagir; -+ uint32 jtagdr; -+ uint32 jtagctrl; -+ -+ /* serial flash interface registers */ -+ uint32 flashcontrol; /* 0x40 */ -+ uint32 flashaddress; -+ uint32 flashdata; -+ uint32 PAD[1]; -+ -+ /* Silicon backplane configuration broadcast control */ -+ uint32 broadcastaddress; /* 0x50 */ -+ uint32 broadcastdata; -+ uint32 PAD[2]; -+ -+ /* gpio - cleared only by power-on-reset */ -+ uint32 gpioin; /* 0x60 */ -+ uint32 gpioout; -+ uint32 gpioouten; -+ uint32 gpiocontrol; -+ uint32 gpiointpolarity; -+ uint32 gpiointmask; -+ uint32 PAD[2]; -+ -+ /* Watchdog timer */ -+ uint32 watchdog; /* 0x80 */ -+ uint32 PAD[1]; -+ -+ /* GPIO based LED powersave registers corerev >= 16 */ -+ uint32 gpiotimerval; /* 0x88 */ -+ uint32 gpiotimeroutmask; -+ -+ /* clock control */ -+ uint32 clockcontrol_n; /* 0x90 */ -+ uint32 clockcontrol_sb; /* aka m0 */ -+ uint32 clockcontrol_pci; /* aka m1 */ -+ uint32 clockcontrol_m2; /* mii/uart/mipsref */ -+ uint32 clockcontrol_m3; /* cpu */ -+ uint32 clkdiv; /* corerev >= 3 */ -+ uint32 PAD[2]; -+ -+ /* pll delay registers (corerev >= 4) */ -+ uint32 pll_on_delay; /* 0xb0 */ -+ uint32 fref_sel_delay; -+ uint32 slow_clk_ctl; /* 5 < corerev < 10 */ -+ uint32 PAD[1]; -+ -+ /* Instaclock registers (corerev >= 10) */ -+ uint32 system_clk_ctl; /* 0xc0 */ -+ uint32 clkstatestretch; -+ uint32 PAD[14]; -+ -+ /* ExtBus control registers (corerev >= 3) */ -+ uint32 pcmcia_config; /* 0x100 */ -+ uint32 pcmcia_memwait; -+ uint32 pcmcia_attrwait; -+ uint32 pcmcia_iowait; -+ uint32 ide_config; -+ uint32 ide_memwait; -+ uint32 ide_attrwait; -+ uint32 ide_iowait; -+ uint32 prog_config; -+ uint32 prog_waitcount; -+ uint32 flash_config; -+ uint32 flash_waitcount; -+ uint32 PAD[44]; -+ -+ /* Clock control and hardware workarounds */ -+ uint32 clk_ctl_st; -+ uint32 hw_war; -+ uint32 PAD[70]; -+ -+ /* uarts */ -+ uint8 uart0data; /* 0x300 */ -+ uint8 uart0imr; -+ uint8 uart0fcr; -+ uint8 uart0lcr; -+ uint8 uart0mcr; -+ uint8 uart0lsr; -+ uint8 uart0msr; -+ uint8 uart0scratch; -+ uint8 PAD[248]; /* corerev >= 1 */ -+ -+ uint8 uart1data; /* 0x400 */ -+ uint8 uart1imr; -+ uint8 uart1fcr; -+ uint8 uart1lcr; -+ uint8 uart1mcr; -+ uint8 uart1lsr; -+ uint8 uart1msr; -+ uint8 uart1scratch; -+} chipcregs_t; -+ -+#endif /* _LANGUAGE_ASSEMBLY */ -+ -+#define CC_CHIPID 0 -+#define CC_CAPABILITIES 4 -+#define CC_JTAGCMD 0x30 -+#define CC_JTAGIR 0x34 -+#define CC_JTAGDR 0x38 -+#define CC_JTAGCTRL 0x3c -+#define CC_WATCHDOG 0x80 -+#define CC_CLKC_N 0x90 -+#define CC_CLKC_M0 0x94 -+#define CC_CLKC_M1 0x98 -+#define CC_CLKC_M2 0x9c -+#define CC_CLKC_M3 0xa0 -+#define CC_CLKDIV 0xa4 -+#define CC_SYS_CLK_CTL 0xc0 -+#define CC_OTP 0x800 -+ -+/* chipid */ -+#define CID_ID_MASK 0x0000ffff /* Chip Id mask */ -+#define CID_REV_MASK 0x000f0000 /* Chip Revision mask */ -+#define CID_REV_SHIFT 16 /* Chip Revision shift */ -+#define CID_PKG_MASK 0x00f00000 /* Package Option mask */ -+#define CID_PKG_SHIFT 20 /* Package Option shift */ -+#define CID_CC_MASK 0x0f000000 /* CoreCount (corerev >= 4) */ -+#define CID_CC_SHIFT 24 -+ -+/* capabilities */ -+#define CAP_UARTS_MASK 0x00000003 /* Number of uarts */ -+#define CAP_MIPSEB 0x00000004 /* MIPS is in big-endian mode */ -+#define CAP_UCLKSEL 0x00000018 /* UARTs clock select */ -+#define CAP_UINTCLK 0x00000008 /* UARTs are driven by internal divided clock */ -+#define CAP_UARTGPIO 0x00000020 /* UARTs own Gpio's 15:12 */ -+#define CAP_EXTBUS_MASK 0x000000c0 /* External bus mask */ -+#define CAP_EXTBUS_NONE 0x00000000 /* No ExtBus present */ -+#define CAP_EXTBUS_FULL 0x00000040 /* ExtBus: PCMCIA, IDE & Prog */ -+#define CAP_EXTBUS_PROG 0x00000080 /* ExtBus: ProgIf only */ -+#define CAP_FLASH_MASK 0x00000700 /* Type of flash */ -+#define CAP_PLL_MASK 0x00038000 /* Type of PLL */ -+#define CAP_PWR_CTL 0x00040000 /* Power control */ -+#define CAP_OTPSIZE 0x00380000 /* OTP Size (0 = none) */ -+#define CAP_OTPSIZE_SHIFT 19 /* OTP Size shift */ -+#define CAP_OTPSIZE_BASE 5 /* OTP Size base */ -+#define CAP_JTAGP 0x00400000 /* JTAG Master Present */ -+#define CAP_ROM 0x00800000 /* Internal boot rom active */ -+#define CAP_BKPLN64 0x08000000 /* 64-bit backplane */ -+ -+/* PLL type */ -+#define PLL_NONE 0x00000000 -+#define PLL_TYPE1 0x00010000 /* 48Mhz base, 3 dividers */ -+#define PLL_TYPE2 0x00020000 /* 48Mhz, 4 dividers */ -+#define PLL_TYPE3 0x00030000 /* 25Mhz, 2 dividers */ -+#define PLL_TYPE4 0x00008000 /* 48Mhz, 4 dividers */ -+#define PLL_TYPE5 0x00018000 /* 25Mhz, 4 dividers */ -+#define PLL_TYPE6 0x00028000 /* 100/200 or 120/240 only */ -+#define PLL_TYPE7 0x00038000 /* 25Mhz, 4 dividers */ -+ -+/* corecontrol */ -+#define CC_UARTCLKO 0x00000001 /* Drive UART with internal clock */ -+#define CC_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ -+ -+/* chipcontrol */ -+#define CHIPCTRL_4321A0_DEFAULT 0x3a4 -+#define CHIPCTRL_4321A1_DEFAULT 0x0a4 -+ -+/* Fields in the otpstatus register */ -+#define OTPS_PROGFAIL 0x80000000 -+#define OTPS_PROTECT 0x00000007 -+#define OTPS_HW_PROTECT 0x00000001 -+#define OTPS_SW_PROTECT 0x00000002 -+#define OTPS_CID_PROTECT 0x00000004 -+ -+/* Fields in the otpcontrol register */ -+#define OTPC_RECWAIT 0xff000000 -+#define OTPC_PROGWAIT 0x00ffff00 -+#define OTPC_PRW_SHIFT 8 -+#define OTPC_MAXFAIL 0x00000038 -+#define OTPC_VSEL 0x00000006 -+#define OTPC_SELVL 0x00000001 -+ -+/* Fields in otpprog */ -+#define OTPP_COL_MASK 0x000000ff -+#define OTPP_ROW_MASK 0x0000ff00 -+#define OTPP_ROW_SHIFT 8 -+#define OTPP_READERR 0x10000000 -+#define OTPP_VALUE 0x20000000 -+#define OTPP_VALUE_SHIFT 29 -+#define OTPP_READ 0x40000000 -+#define OTPP_START 0x80000000 -+#define OTPP_BUSY 0x80000000 -+ -+/* jtagcmd */ -+#define JCMD_START 0x80000000 -+#define JCMD_BUSY 0x80000000 -+#define JCMD_PAUSE 0x40000000 -+#define JCMD0_ACC_MASK 0x0000f000 -+#define JCMD0_ACC_IRDR 0x00000000 -+#define JCMD0_ACC_DR 0x00001000 -+#define JCMD0_ACC_IR 0x00002000 -+#define JCMD0_ACC_RESET 0x00003000 -+#define JCMD0_ACC_IRPDR 0x00004000 -+#define JCMD0_ACC_PDR 0x00005000 -+#define JCMD0_IRW_MASK 0x00000f00 -+#define JCMD_ACC_MASK 0x000f0000 /* Changes for corerev 11 */ -+#define JCMD_ACC_IRDR 0x00000000 -+#define JCMD_ACC_DR 0x00010000 -+#define JCMD_ACC_IR 0x00020000 -+#define JCMD_ACC_RESET 0x00030000 -+#define JCMD_ACC_IRPDR 0x00040000 -+#define JCMD_ACC_PDR 0x00050000 -+#define JCMD_IRW_MASK 0x00001f00 -+#define JCMD_IRW_SHIFT 8 -+#define JCMD_DRW_MASK 0x0000003f -+ -+/* jtagctrl */ -+#define JCTRL_FORCE_CLK 4 /* Force clock */ -+#define JCTRL_EXT_EN 2 /* Enable external targets */ -+#define JCTRL_EN 1 /* Enable Jtag master */ -+ -+/* Fields in clkdiv */ -+#define CLKD_SFLASH 0x0f000000 -+#define CLKD_SFLASH_SHIFT 24 -+#define CLKD_OTP 0x000f0000 -+#define CLKD_OTP_SHIFT 16 -+#define CLKD_JTAG 0x00000f00 -+#define CLKD_JTAG_SHIFT 8 -+#define CLKD_UART 0x000000ff -+ -+/* intstatus/intmask */ -+#define CI_GPIO 0x00000001 /* gpio intr */ -+#define CI_EI 0x00000002 /* ro: ext intr pin (corerev >= 3) */ -+#define CI_WDRESET 0x80000000 /* watchdog reset occurred */ -+ -+/* slow_clk_ctl */ -+#define SCC_SS_MASK 0x00000007 /* slow clock source mask */ -+#define SCC_SS_LPO 0x00000000 /* source of slow clock is LPO */ -+#define SCC_SS_XTAL 0x00000001 /* source of slow clock is crystal */ -+#define SCC_SS_PCI 0x00000002 /* source of slow clock is PCI */ -+#define SCC_LF 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */ -+#define SCC_LP 0x00000400 /* LPOPowerDown, 1: LPO is disabled, -+ * 0: LPO is enabled -+ */ -+#define SCC_FS 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, -+ * 0: power logic control -+ */ -+#define SCC_IP 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors -+ * PLL clock disable requests from core -+ */ -+#define SCC_XC 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't -+ * disable crystal when appropriate -+ */ -+#define SCC_XP 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */ -+#define SCC_CD_MASK 0xffff0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */ -+#define SCC_CD_SHIFT 16 -+ -+/* system_clk_ctl */ -+#define SYCC_IE 0x00000001 /* ILPen: Enable Idle Low Power */ -+#define SYCC_AE 0x00000002 /* ALPen: Enable Active Low Power */ -+#define SYCC_FP 0x00000004 /* ForcePLLOn */ -+#define SYCC_AR 0x00000008 /* Force ALP (or HT if ALPen is not set */ -+#define SYCC_HR 0x00000010 /* Force HT */ -+#define SYCC_CD_MASK 0xffff0000 /* ClkDiv (ILP = 1/(4 * (divisor + 1)) */ -+#define SYCC_CD_SHIFT 16 -+ -+/* gpiotimerval */ -+#define GPIO_ONTIME_SHIFT 16 -+ -+/* clockcontrol_n */ -+#define CN_N1_MASK 0x3f /* n1 control */ -+#define CN_N2_MASK 0x3f00 /* n2 control */ -+#define CN_N2_SHIFT 8 -+#define CN_PLLC_MASK 0xf0000 /* pll control */ -+#define CN_PLLC_SHIFT 16 -+ -+/* clockcontrol_sb/pci/uart */ -+#define CC_M1_MASK 0x3f /* m1 control */ -+#define CC_M2_MASK 0x3f00 /* m2 control */ -+#define CC_M2_SHIFT 8 -+#define CC_M3_MASK 0x3f0000 /* m3 control */ -+#define CC_M3_SHIFT 16 -+#define CC_MC_MASK 0x1f000000 /* mux control */ -+#define CC_MC_SHIFT 24 -+ -+/* N3M Clock control magic field values */ -+#define CC_F6_2 0x02 /* A factor of 2 in */ -+#define CC_F6_3 0x03 /* 6-bit fields like */ -+#define CC_F6_4 0x05 /* N1, M1 or M3 */ -+#define CC_F6_5 0x09 -+#define CC_F6_6 0x11 -+#define CC_F6_7 0x21 -+ -+#define CC_F5_BIAS 5 /* 5-bit fields get this added */ -+ -+#define CC_MC_BYPASS 0x08 -+#define CC_MC_M1 0x04 -+#define CC_MC_M1M2 0x02 -+#define CC_MC_M1M2M3 0x01 -+#define CC_MC_M1M3 0x11 -+ -+/* Type 2 Clock control magic field values */ -+#define CC_T2_BIAS 2 /* n1, n2, m1 & m3 bias */ -+#define CC_T2M2_BIAS 3 /* m2 bias */ -+ -+#define CC_T2MC_M1BYP 1 -+#define CC_T2MC_M2BYP 2 -+#define CC_T2MC_M3BYP 4 -+ -+/* Type 6 Clock control magic field values */ -+#define CC_T6_MMASK 1 /* bits of interest in m */ -+#define CC_T6_M0 120000000 /* sb clock for m = 0 */ -+#define CC_T6_M1 100000000 /* sb clock for m = 1 */ -+#define SB2MIPS_T6(sb) (2 * (sb)) -+ -+/* Common clock base */ -+#define CC_CLOCK_BASE1 24000000 /* Half the clock freq */ -+#define CC_CLOCK_BASE2 12500000 /* Alternate crystal on some PLL's */ -+ -+/* Clock control values for 200Mhz in 5350 */ -+#define CLKC_5350_N 0x0311 -+#define CLKC_5350_M 0x04020009 -+ -+/* Flash types in the chipcommon capabilities register */ -+#define FLASH_NONE 0x000 /* No flash */ -+#define SFLASH_ST 0x100 /* ST serial flash */ -+#define SFLASH_AT 0x200 /* Atmel serial flash */ -+#define PFLASH 0x700 /* Parallel flash */ -+ -+/* Bits in the ExtBus config registers */ -+#define CC_CFG_EN 0x0001 /* Enable */ -+#define CC_CFG_EM_MASK 0x000e /* Extif Mode */ -+#define CC_CFG_EM_ASYNC 0x0000 /* Async/Parallel flash */ -+#define CC_CFG_EM_SYNC 0x0002 /* Synchronous */ -+#define CC_CFG_EM_PCMCIA 0x0004 /* PCMCIA */ -+#define CC_CFG_EM_IDE 0x0006 /* IDE */ -+#define CC_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ -+#define CC_CFG_CD_MASK 0x0060 /* Sync: Clock divisor */ -+#define CC_CFG_CE 0x0080 /* Sync: Clock enable */ -+#define CC_CFG_SB 0x0100 /* Sync: Size/Bytestrobe */ -+ -+/* ExtBus address space */ -+#define CC_EB_BASE 0x1a000000 /* Chipc ExtBus base address */ -+#define CC_EB_PCMCIA_MEM 0x1a000000 /* PCMCIA 0 memory base address */ -+#define CC_EB_PCMCIA_IO 0x1a200000 /* PCMCIA 0 I/O base address */ -+#define CC_EB_PCMCIA_CFG 0x1a400000 /* PCMCIA 0 config base address */ -+#define CC_EB_IDE 0x1a800000 /* IDE memory base */ -+#define CC_EB_PCMCIA1_MEM 0x1a800000 /* PCMCIA 1 memory base address */ -+#define CC_EB_PCMCIA1_IO 0x1aa00000 /* PCMCIA 1 I/O base address */ -+#define CC_EB_PCMCIA1_CFG 0x1ac00000 /* PCMCIA 1 config base address */ -+#define CC_EB_PROGIF 0x1b000000 /* ProgIF Async/Sync base address */ -+ -+ -+/* Start/busy bit in flashcontrol */ -+#define SFLASH_OPCODE 0x000000ff -+#define SFLASH_ACTION 0x00000700 -+#define SFLASH_START 0x80000000 -+#define SFLASH_BUSY SFLASH_START -+ -+/* flashcontrol action codes */ -+#define SFLASH_ACT_OPONLY 0x0000 /* Issue opcode only */ -+#define SFLASH_ACT_OP1D 0x0100 /* opcode + 1 data byte */ -+#define SFLASH_ACT_OP3A 0x0200 /* opcode + 3 address bytes */ -+#define SFLASH_ACT_OP3A1D 0x0300 /* opcode + 3 addres & 1 data bytes */ -+#define SFLASH_ACT_OP3A4D 0x0400 /* opcode + 3 addres & 4 data bytes */ -+#define SFLASH_ACT_OP3A4X4D 0x0500 /* opcode + 3 addres, 4 don't care & 4 data bytes */ -+#define SFLASH_ACT_OP3A1X4D 0x0700 /* opcode + 3 addres, 1 don't care & 4 data bytes */ -+ -+/* flashcontrol action+opcodes for ST flashes */ -+#define SFLASH_ST_WREN 0x0006 /* Write Enable */ -+#define SFLASH_ST_WRDIS 0x0004 /* Write Disable */ -+#define SFLASH_ST_RDSR 0x0105 /* Read Status Register */ -+#define SFLASH_ST_WRSR 0x0101 /* Write Status Register */ -+#define SFLASH_ST_READ 0x0303 /* Read Data Bytes */ -+#define SFLASH_ST_PP 0x0302 /* Page Program */ -+#define SFLASH_ST_SE 0x02d8 /* Sector Erase */ -+#define SFLASH_ST_BE 0x00c7 /* Bulk Erase */ -+#define SFLASH_ST_DP 0x00b9 /* Deep Power-down */ -+#define SFLASH_ST_RES 0x03ab /* Read Electronic Signature */ -+ -+/* Status register bits for ST flashes */ -+#define SFLASH_ST_WIP 0x01 /* Write In Progress */ -+#define SFLASH_ST_WEL 0x02 /* Write Enable Latch */ -+#define SFLASH_ST_BP_MASK 0x1c /* Block Protect */ -+#define SFLASH_ST_BP_SHIFT 2 -+#define SFLASH_ST_SRWD 0x80 /* Status Register Write Disable */ -+ -+/* flashcontrol action+opcodes for Atmel flashes */ -+#define SFLASH_AT_READ 0x07e8 -+#define SFLASH_AT_PAGE_READ 0x07d2 -+#define SFLASH_AT_BUF1_READ -+#define SFLASH_AT_BUF2_READ -+#define SFLASH_AT_STATUS 0x01d7 -+#define SFLASH_AT_BUF1_WRITE 0x0384 -+#define SFLASH_AT_BUF2_WRITE 0x0387 -+#define SFLASH_AT_BUF1_ERASE_PROGRAM 0x0283 -+#define SFLASH_AT_BUF2_ERASE_PROGRAM 0x0286 -+#define SFLASH_AT_BUF1_PROGRAM 0x0288 -+#define SFLASH_AT_BUF2_PROGRAM 0x0289 -+#define SFLASH_AT_PAGE_ERASE 0x0281 -+#define SFLASH_AT_BLOCK_ERASE 0x0250 -+#define SFLASH_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382 -+#define SFLASH_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385 -+#define SFLASH_AT_BUF1_LOAD 0x0253 -+#define SFLASH_AT_BUF2_LOAD 0x0255 -+#define SFLASH_AT_BUF1_COMPARE 0x0260 -+#define SFLASH_AT_BUF2_COMPARE 0x0261 -+#define SFLASH_AT_BUF1_REPROGRAM 0x0258 -+#define SFLASH_AT_BUF2_REPROGRAM 0x0259 -+ -+/* Status register bits for Atmel flashes */ -+#define SFLASH_AT_READY 0x80 -+#define SFLASH_AT_MISMATCH 0x40 -+#define SFLASH_AT_ID_MASK 0x38 -+#define SFLASH_AT_ID_SHIFT 3 -+ -+/* OTP regions */ -+#define OTP_HW_REGION OTPS_HW_PROTECT -+#define OTP_SW_REGION OTPS_SW_PROTECT -+#define OTP_CID_REGION OTPS_CID_PROTECT -+ -+/* OTP regions (Byte offsets from otp size) */ -+#define OTP_SWLIM_OFF (-8) -+#define OTP_CIDBASE_OFF 0 -+#define OTP_CIDLIM_OFF 8 -+ -+/* Predefined OTP words (Word offset from otp size) */ -+#define OTP_BOUNDARY_OFF (-4) -+#define OTP_HWSIGN_OFF (-3) -+#define OTP_SWSIGN_OFF (-2) -+#define OTP_CIDSIGN_OFF (-1) -+ -+#define OTP_CID_OFF 0 -+#define OTP_PKG_OFF 1 -+#define OTP_FID_OFF 2 -+#define OTP_RSV_OFF 3 -+#define OTP_LIM_OFF 4 -+ -+#define OTP_SIGNATURE 0x578a -+#define OTP_MAGIC 0x4e56 -+ -+/* -+ * These are the UART port assignments, expressed as offsets from the base -+ * register. These assignments should hold for any serial port based on -+ * a 8250, 16450, or 16550(A). -+ */ -+ -+#define UART_RX 0 /* In: Receive buffer (DLAB=0) */ -+#define UART_TX 0 /* Out: Transmit buffer (DLAB=0) */ -+#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ -+#define UART_IER 1 /* In/Out: Interrupt Enable Register (DLAB=0) */ -+#define UART_DLM 1 /* Out: Divisor Latch High (DLAB=1) */ -+#define UART_IIR 2 /* In: Interrupt Identity Register */ -+#define UART_FCR 2 /* Out: FIFO Control Register */ -+#define UART_LCR 3 /* Out: Line Control Register */ -+#define UART_MCR 4 /* Out: Modem Control Register */ -+#define UART_LSR 5 /* In: Line Status Register */ -+#define UART_MSR 6 /* In: Modem Status Register */ -+#define UART_SCR 7 /* I/O: Scratch Register */ -+#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ -+#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ -+#define UART_MCR_OUT2 0x08 /* MCR GPIO out 2 */ -+#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ -+#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ -+#define UART_LSR_RXRDY 0x01 /* Receiver ready */ -+#define UART_FCR_FIFO_ENABLE 1 /* FIFO control register bit controlling FIFO enable/disable */ -+ -+/* Interrupt Enable Register (IER) bits */ -+#define UART_IER_EDSSI 8 /* enable modem status interrupt */ -+#define UART_IER_ELSI 4 /* enable receiver line status interrupt */ -+#define UART_IER_ETBEI 2 /* enable transmitter holding register empty interrupt */ -+#define UART_IER_ERBFI 1 /* enable data available interrupt */ -+ -+#endif /* _SBCHIPC_H */ -diff -urN linux.old/arch/mips/bcm947xx/include/sbconfig.h linux.dev/arch/mips/bcm947xx/include/sbconfig.h ---- linux.old/arch/mips/bcm947xx/include/sbconfig.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/sbconfig.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,369 @@ -+/* -+ * Broadcom SiliconBackplane hardware register definitions. -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: sbconfig.h,v 1.1.1.11 2006/02/27 03:43:16 honor Exp $ -+ */ -+ -+#ifndef _SBCONFIG_H -+#define _SBCONFIG_H -+ -+/* cpp contortions to concatenate w/arg prescan */ -+#ifndef PAD -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+#endif -+ -+/* -+ * SiliconBackplane Address Map. -+ * All regions may not exist on all chips. -+ */ -+#define SB_SDRAM_BASE 0x00000000 /* Physical SDRAM */ -+#define SB_PCI_MEM 0x08000000 /* Host Mode sb2pcitranslation0 (64 MB) */ -+#define SB_PCI_MEM_SZ (64 * 1024 * 1024) -+#define SB_PCI_CFG 0x0c000000 /* Host Mode sb2pcitranslation1 (64 MB) */ -+#define SB_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ -+#define SB_ENUM_BASE 0x18000000 /* Enumeration space base */ -+#define SB_ENUM_LIM 0x18010000 /* Enumeration space limit */ -+ -+#define SB_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */ -+#define SB_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */ -+ -+#define SB_EXTIF_BASE 0x1f000000 /* External Interface region base address */ -+#define SB_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */ -+#define SB_FLASH1_SZ 0x00400000 /* MIPS Size of Flash Region 1 */ -+ -+#define SB_ROM 0x20000000 /* ARM ROM */ -+#define SB_SRAM2 0x80000000 /* ARM SRAM Region 2 */ -+#define SB_ARM_FLASH1 0xffff0000 /* ARM Flash Region 1 */ -+#define SB_ARM_FLASH1_SZ 0x00010000 /* ARM Size of Flash Region 1 */ -+ -+#define SB_PCI_DMA 0x40000000 /* Client Mode sb2pcitranslation2 (1 GB) */ -+#define SB_PCI_DMA_SZ 0x40000000 /* Client Mode sb2pcitranslation2 size in bytes */ -+#define SB_PCIE_DMA_L32 0x00000000 /* PCIE Client Mode sb2pcitranslation2 -+ * (2 ZettaBytes), low 32 bits -+ */ -+#define SB_PCIE_DMA_H32 0x80000000 /* PCIE Client Mode sb2pcitranslation2 -+ * (2 ZettaBytes), high 32 bits -+ */ -+#define SB_EUART (SB_EXTIF_BASE + 0x00800000) -+#define SB_LED (SB_EXTIF_BASE + 0x00900000) -+ -+ -+/* enumeration space related defs */ -+#define SB_CORE_SIZE 0x1000 /* each core gets 4Kbytes for registers */ -+#define SB_MAXCORES ((SB_ENUM_LIM - SB_ENUM_BASE)/SB_CORE_SIZE) -+#define SB_MAXFUNCS 4 /* max. # functions per core */ -+#define SBCONFIGOFF 0xf00 /* core sbconfig regs are top 256bytes of regs */ -+#define SBCONFIGSIZE 256 /* sizeof (sbconfig_t) */ -+ -+/* mips address */ -+#define SB_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ -+ -+/* -+ * Sonics Configuration Space Registers. -+ */ -+#define SBIPSFLAG 0x08 -+#define SBTPSFLAG 0x18 -+#define SBTMERRLOGA 0x48 /* sonics >= 2.3 */ -+#define SBTMERRLOG 0x50 /* sonics >= 2.3 */ -+#define SBADMATCH3 0x60 -+#define SBADMATCH2 0x68 -+#define SBADMATCH1 0x70 -+#define SBIMSTATE 0x90 -+#define SBINTVEC 0x94 -+#define SBTMSTATELOW 0x98 -+#define SBTMSTATEHIGH 0x9c -+#define SBBWA0 0xa0 -+#define SBIMCONFIGLOW 0xa8 -+#define SBIMCONFIGHIGH 0xac -+#define SBADMATCH0 0xb0 -+#define SBTMCONFIGLOW 0xb8 -+#define SBTMCONFIGHIGH 0xbc -+#define SBBCONFIG 0xc0 -+#define SBBSTATE 0xc8 -+#define SBACTCNFG 0xd8 -+#define SBFLAGST 0xe8 -+#define SBIDLOW 0xf8 -+#define SBIDHIGH 0xfc -+ -+/* All the previous registers are above SBCONFIGOFF, but with Sonics 2.3, we have -+ * a few registers *below* that line. I think it would be very confusing to try -+ * and change the value of SBCONFIGOFF, so I'm definig them as absolute offsets here, -+ */ -+ -+#define SBIMERRLOGA 0xea8 -+#define SBIMERRLOG 0xeb0 -+#define SBTMPORTCONNID0 0xed8 -+#define SBTMPORTLOCK0 0xef8 -+ -+#ifndef _LANGUAGE_ASSEMBLY -+ -+typedef volatile struct _sbconfig { -+ uint32 PAD[2]; -+ uint32 sbipsflag; /* initiator port ocp slave flag */ -+ uint32 PAD[3]; -+ uint32 sbtpsflag; /* target port ocp slave flag */ -+ uint32 PAD[11]; -+ uint32 sbtmerrloga; /* (sonics >= 2.3) */ -+ uint32 PAD; -+ uint32 sbtmerrlog; /* (sonics >= 2.3) */ -+ uint32 PAD[3]; -+ uint32 sbadmatch3; /* address match3 */ -+ uint32 PAD; -+ uint32 sbadmatch2; /* address match2 */ -+ uint32 PAD; -+ uint32 sbadmatch1; /* address match1 */ -+ uint32 PAD[7]; -+ uint32 sbimstate; /* initiator agent state */ -+ uint32 sbintvec; /* interrupt mask */ -+ uint32 sbtmstatelow; /* target state */ -+ uint32 sbtmstatehigh; /* target state */ -+ uint32 sbbwa0; /* bandwidth allocation table0 */ -+ uint32 PAD; -+ uint32 sbimconfiglow; /* initiator configuration */ -+ uint32 sbimconfighigh; /* initiator configuration */ -+ uint32 sbadmatch0; /* address match0 */ -+ uint32 PAD; -+ uint32 sbtmconfiglow; /* target configuration */ -+ uint32 sbtmconfighigh; /* target configuration */ -+ uint32 sbbconfig; /* broadcast configuration */ -+ uint32 PAD; -+ uint32 sbbstate; /* broadcast state */ -+ uint32 PAD[3]; -+ uint32 sbactcnfg; /* activate configuration */ -+ uint32 PAD[3]; -+ uint32 sbflagst; /* current sbflags */ -+ uint32 PAD[3]; -+ uint32 sbidlow; /* identification */ -+ uint32 sbidhigh; /* identification */ -+} sbconfig_t; -+ -+#endif /* _LANGUAGE_ASSEMBLY */ -+ -+/* sbipsflag */ -+#define SBIPS_INT1_MASK 0x3f /* which sbflags get routed to mips interrupt 1 */ -+#define SBIPS_INT1_SHIFT 0 -+#define SBIPS_INT2_MASK 0x3f00 /* which sbflags get routed to mips interrupt 2 */ -+#define SBIPS_INT2_SHIFT 8 -+#define SBIPS_INT3_MASK 0x3f0000 /* which sbflags get routed to mips interrupt 3 */ -+#define SBIPS_INT3_SHIFT 16 -+#define SBIPS_INT4_MASK 0x3f000000 /* which sbflags get routed to mips interrupt 4 */ -+#define SBIPS_INT4_SHIFT 24 -+ -+/* sbtpsflag */ -+#define SBTPS_NUM0_MASK 0x3f /* interrupt sbFlag # generated by this core */ -+#define SBTPS_F0EN0 0x40 /* interrupt is always sent on the backplane */ -+ -+/* sbtmerrlog */ -+#define SBTMEL_CM 0x00000007 /* command */ -+#define SBTMEL_CI 0x0000ff00 /* connection id */ -+#define SBTMEL_EC 0x0f000000 /* error code */ -+#define SBTMEL_ME 0x80000000 /* multiple error */ -+ -+/* sbimstate */ -+#define SBIM_PC 0xf /* pipecount */ -+#define SBIM_AP_MASK 0x30 /* arbitration policy */ -+#define SBIM_AP_BOTH 0x00 /* use both timeslaces and token */ -+#define SBIM_AP_TS 0x10 /* use timesliaces only */ -+#define SBIM_AP_TK 0x20 /* use token only */ -+#define SBIM_AP_RSV 0x30 /* reserved */ -+#define SBIM_IBE 0x20000 /* inbanderror */ -+#define SBIM_TO 0x40000 /* timeout */ -+#define SBIM_BY 0x01800000 /* busy (sonics >= 2.3) */ -+#define SBIM_RJ 0x02000000 /* reject (sonics >= 2.3) */ -+ -+/* sbtmstatelow */ -+#define SBTML_RESET 0x1 /* reset */ -+#define SBTML_REJ_MASK 0x6 /* reject */ -+#define SBTML_REJ_SHIFT 1 -+#define SBTML_CLK 0x10000 /* clock enable */ -+#define SBTML_FGC 0x20000 /* force gated clocks on */ -+#define SBTML_FL_MASK 0x3ffc0000 /* core-specific flags */ -+#define SBTML_PE 0x40000000 /* pme enable */ -+#define SBTML_BE 0x80000000 /* bist enable */ -+ -+/* sbtmstatehigh */ -+#define SBTMH_SERR 0x1 /* serror */ -+#define SBTMH_INT 0x2 /* interrupt */ -+#define SBTMH_BUSY 0x4 /* busy */ -+#define SBTMH_TO 0x00000020 /* timeout (sonics >= 2.3) */ -+#define SBTMH_FL_MASK 0x1fff0000 /* core-specific flags */ -+#define SBTMH_DMA64 0x10000000 /* supports DMA with 64-bit addresses */ -+#define SBTMH_GCR 0x20000000 /* gated clock request */ -+#define SBTMH_BISTF 0x40000000 /* bist failed */ -+#define SBTMH_BISTD 0x80000000 /* bist done */ -+ -+ -+/* sbbwa0 */ -+#define SBBWA_TAB0_MASK 0xffff /* lookup table 0 */ -+#define SBBWA_TAB1_MASK 0xffff /* lookup table 1 */ -+#define SBBWA_TAB1_SHIFT 16 -+ -+/* sbimconfiglow */ -+#define SBIMCL_STO_MASK 0x7 /* service timeout */ -+#define SBIMCL_RTO_MASK 0x70 /* request timeout */ -+#define SBIMCL_RTO_SHIFT 4 -+#define SBIMCL_CID_MASK 0xff0000 /* connection id */ -+#define SBIMCL_CID_SHIFT 16 -+ -+/* sbimconfighigh */ -+#define SBIMCH_IEM_MASK 0xc /* inband error mode */ -+#define SBIMCH_TEM_MASK 0x30 /* timeout error mode */ -+#define SBIMCH_TEM_SHIFT 4 -+#define SBIMCH_BEM_MASK 0xc0 /* bus error mode */ -+#define SBIMCH_BEM_SHIFT 6 -+ -+/* sbadmatch0 */ -+#define SBAM_TYPE_MASK 0x3 /* address type */ -+#define SBAM_AD64 0x4 /* reserved */ -+#define SBAM_ADINT0_MASK 0xf8 /* type0 size */ -+#define SBAM_ADINT0_SHIFT 3 -+#define SBAM_ADINT1_MASK 0x1f8 /* type1 size */ -+#define SBAM_ADINT1_SHIFT 3 -+#define SBAM_ADINT2_MASK 0x1f8 /* type2 size */ -+#define SBAM_ADINT2_SHIFT 3 -+#define SBAM_ADEN 0x400 /* enable */ -+#define SBAM_ADNEG 0x800 /* negative decode */ -+#define SBAM_BASE0_MASK 0xffffff00 /* type0 base address */ -+#define SBAM_BASE0_SHIFT 8 -+#define SBAM_BASE1_MASK 0xfffff000 /* type1 base address for the core */ -+#define SBAM_BASE1_SHIFT 12 -+#define SBAM_BASE2_MASK 0xffff0000 /* type2 base address for the core */ -+#define SBAM_BASE2_SHIFT 16 -+ -+/* sbtmconfiglow */ -+#define SBTMCL_CD_MASK 0xff /* clock divide */ -+#define SBTMCL_CO_MASK 0xf800 /* clock offset */ -+#define SBTMCL_CO_SHIFT 11 -+#define SBTMCL_IF_MASK 0xfc0000 /* interrupt flags */ -+#define SBTMCL_IF_SHIFT 18 -+#define SBTMCL_IM_MASK 0x3000000 /* interrupt mode */ -+#define SBTMCL_IM_SHIFT 24 -+ -+/* sbtmconfighigh */ -+#define SBTMCH_BM_MASK 0x3 /* busy mode */ -+#define SBTMCH_RM_MASK 0x3 /* retry mode */ -+#define SBTMCH_RM_SHIFT 2 -+#define SBTMCH_SM_MASK 0x30 /* stop mode */ -+#define SBTMCH_SM_SHIFT 4 -+#define SBTMCH_EM_MASK 0x300 /* sb error mode */ -+#define SBTMCH_EM_SHIFT 8 -+#define SBTMCH_IM_MASK 0xc00 /* int mode */ -+#define SBTMCH_IM_SHIFT 10 -+ -+/* sbbconfig */ -+#define SBBC_LAT_MASK 0x3 /* sb latency */ -+#define SBBC_MAX0_MASK 0xf0000 /* maxccntr0 */ -+#define SBBC_MAX0_SHIFT 16 -+#define SBBC_MAX1_MASK 0xf00000 /* maxccntr1 */ -+#define SBBC_MAX1_SHIFT 20 -+ -+/* sbbstate */ -+#define SBBS_SRD 0x1 /* st reg disable */ -+#define SBBS_HRD 0x2 /* hold reg disable */ -+ -+/* sbidlow */ -+#define SBIDL_CS_MASK 0x3 /* config space */ -+#define SBIDL_AR_MASK 0x38 /* # address ranges supported */ -+#define SBIDL_AR_SHIFT 3 -+#define SBIDL_SYNCH 0x40 /* sync */ -+#define SBIDL_INIT 0x80 /* initiator */ -+#define SBIDL_MINLAT_MASK 0xf00 /* minimum backplane latency */ -+#define SBIDL_MINLAT_SHIFT 8 -+#define SBIDL_MAXLAT 0xf000 /* maximum backplane latency */ -+#define SBIDL_MAXLAT_SHIFT 12 -+#define SBIDL_FIRST 0x10000 /* this initiator is first */ -+#define SBIDL_CW_MASK 0xc0000 /* cycle counter width */ -+#define SBIDL_CW_SHIFT 18 -+#define SBIDL_TP_MASK 0xf00000 /* target ports */ -+#define SBIDL_TP_SHIFT 20 -+#define SBIDL_IP_MASK 0xf000000 /* initiator ports */ -+#define SBIDL_IP_SHIFT 24 -+#define SBIDL_RV_MASK 0xf0000000 /* sonics backplane revision code */ -+#define SBIDL_RV_SHIFT 28 -+#define SBIDL_RV_2_2 0x00000000 /* version 2.2 or earlier */ -+#define SBIDL_RV_2_3 0x10000000 /* version 2.3 */ -+ -+/* sbidhigh */ -+#define SBIDH_RC_MASK 0x000f /* revision code */ -+#define SBIDH_RCE_MASK 0x7000 /* revision code extension field */ -+#define SBIDH_RCE_SHIFT 8 -+#define SBCOREREV(sbidh) \ -+ ((((sbidh) & SBIDH_RCE_MASK) >> SBIDH_RCE_SHIFT) | ((sbidh) & SBIDH_RC_MASK)) -+#define SBIDH_CC_MASK 0x8ff0 /* core code */ -+#define SBIDH_CC_SHIFT 4 -+#define SBIDH_VC_MASK 0xffff0000 /* vendor code */ -+#define SBIDH_VC_SHIFT 16 -+ -+#define SB_COMMIT 0xfd8 /* update buffered registers value */ -+ -+/* vendor codes */ -+#define SB_VEND_BCM 0x4243 /* Broadcom's SB vendor code */ -+ -+/* core codes */ -+#define SB_NODEV 0x700 /* Invalid coreid */ -+#define SB_CC 0x800 /* chipcommon core */ -+#define SB_ILINE20 0x801 /* iline20 core */ -+#define SB_SDRAM 0x803 /* sdram core */ -+#define SB_PCI 0x804 /* pci core */ -+#define SB_MIPS 0x805 /* mips core */ -+#define SB_ENET 0x806 /* enet mac core */ -+#define SB_CODEC 0x807 /* v90 codec core */ -+#define SB_USB 0x808 /* usb 1.1 host/device core */ -+#define SB_ADSL 0x809 /* ADSL core */ -+#define SB_ILINE100 0x80a /* iline100 core */ -+#define SB_IPSEC 0x80b /* ipsec core */ -+#define SB_PCMCIA 0x80d /* pcmcia core */ -+#define SB_SDIOD SB_PCMCIA /* pcmcia core has sdio device */ -+#define SB_SOCRAM 0x80e /* internal memory core */ -+#define SB_MEMC 0x80f /* memc sdram core */ -+#define SB_EXTIF 0x811 /* external interface core */ -+#define SB_D11 0x812 /* 802.11 MAC core */ -+#define SB_MIPS33 0x816 /* mips3302 core */ -+#define SB_USB11H 0x817 /* usb 1.1 host core */ -+#define SB_USB11D 0x818 /* usb 1.1 device core */ -+#define SB_USB20H 0x819 /* usb 2.0 host core */ -+#define SB_USB20D 0x81a /* usb 2.0 device core */ -+#define SB_SDIOH 0x81b /* sdio host core */ -+#define SB_ROBO 0x81c /* roboswitch core */ -+#define SB_ATA100 0x81d /* parallel ATA core */ -+#define SB_SATAXOR 0x81e /* serial ATA & XOR DMA core */ -+#define SB_GIGETH 0x81f /* gigabit ethernet core */ -+#define SB_PCIE 0x820 /* pci express core */ -+#define SB_MIMO 0x821 /* MIMO phy core */ -+#define SB_SRAMC 0x822 /* SRAM controller core */ -+#define SB_MINIMAC 0x823 /* MINI MAC/phy core */ -+#define SB_ARM11 0x824 /* ARM 1176 core */ -+#define SB_ARM7 0x825 /* ARM 7tdmi core */ -+ -+#define SB_CC_IDX 0 /* chipc, when present, is always core 0 */ -+ -+/* Not really related to Silicon Backplane, but a couple of software -+ * conventions for the use the flash space: -+ */ -+ -+/* Minumum amount of flash we support */ -+#define FLASH_MIN 0x00020000 /* Minimum flash size */ -+ -+/* A boot/binary may have an embedded block that describes its size */ -+#define BISZ_OFFSET 0x3e0 /* At this offset into the binary */ -+#define BISZ_MAGIC 0x4249535a /* Marked with this value: 'BISZ' */ -+#define BISZ_MAGIC_IDX 0 /* Word 0: magic */ -+#define BISZ_TXTST_IDX 1 /* 1: text start */ -+#define BISZ_TXTEND_IDX 2 /* 2: text start */ -+#define BISZ_DATAST_IDX 3 /* 3: text start */ -+#define BISZ_DATAEND_IDX 4 /* 4: text start */ -+#define BISZ_BSSST_IDX 5 /* 5: text start */ -+#define BISZ_BSSEND_IDX 6 /* 6: text start */ -+#define BISZ_SIZE 7 /* descriptor size in 32-bit intergers */ -+ -+#endif /* _SBCONFIG_H */ -diff -urN linux.old/arch/mips/bcm947xx/include/sbextif.h linux.dev/arch/mips/bcm947xx/include/sbextif.h ---- linux.old/arch/mips/bcm947xx/include/sbextif.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/sbextif.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,243 @@ -+/* -+ * Hardware-specific External Interface I/O core definitions -+ * for the BCM47xx family of SiliconBackplane-based chips. -+ * -+ * The External Interface core supports a total of three external chip selects -+ * supporting external interfaces. One of the external chip selects is -+ * used for Flash, one is used for PCMCIA, and the other may be -+ * programmed to support either a synchronous interface or an -+ * asynchronous interface. The asynchronous interface can be used to -+ * support external devices such as UARTs and the BCM2019 Bluetooth -+ * baseband processor. -+ * The external interface core also contains 2 on-chip 16550 UARTs, clock -+ * frequency control, a watchdog interrupt timer, and a GPIO interface. -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: sbextif.h,v 1.1.1.8 2006/02/27 03:43:16 honor Exp $ -+ */ -+ -+#ifndef _SBEXTIF_H -+#define _SBEXTIF_H -+ -+/* external interface address space */ -+#define EXTIF_PCMCIA_MEMBASE(x) (x) -+#define EXTIF_PCMCIA_IOBASE(x) ((x) + 0x100000) -+#define EXTIF_PCMCIA_CFGBASE(x) ((x) + 0x200000) -+#define EXTIF_CFGIF_BASE(x) ((x) + 0x800000) -+#define EXTIF_FLASH_BASE(x) ((x) + 0xc00000) -+ -+/* cpp contortions to concatenate w/arg prescan */ -+#ifndef PAD -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+#endif /* PAD */ -+ -+/* -+ * The multiple instances of output and output enable registers -+ * are present to allow driver software for multiple cores to control -+ * gpio outputs without needing to share a single register pair. -+ */ -+struct gpiouser { -+ uint32 out; -+ uint32 outen; -+}; -+#define NGPIOUSER 5 -+ -+typedef volatile struct { -+ uint32 corecontrol; -+ uint32 extstatus; -+ uint32 PAD[2]; -+ -+ /* pcmcia control registers */ -+ uint32 pcmcia_config; -+ uint32 pcmcia_memwait; -+ uint32 pcmcia_attrwait; -+ uint32 pcmcia_iowait; -+ -+ /* programmable interface control registers */ -+ uint32 prog_config; -+ uint32 prog_waitcount; -+ -+ /* flash control registers */ -+ uint32 flash_config; -+ uint32 flash_waitcount; -+ uint32 PAD[4]; -+ -+ uint32 watchdog; -+ -+ /* clock control */ -+ uint32 clockcontrol_n; -+ uint32 clockcontrol_sb; -+ uint32 clockcontrol_pci; -+ uint32 clockcontrol_mii; -+ uint32 PAD[3]; -+ -+ /* gpio */ -+ uint32 gpioin; -+ struct gpiouser gpio[NGPIOUSER]; -+ uint32 PAD; -+ uint32 ejtagouten; -+ uint32 gpiointpolarity; -+ uint32 gpiointmask; -+ uint32 PAD[153]; -+ -+ uint8 uartdata; -+ uint8 PAD[3]; -+ uint8 uartimer; -+ uint8 PAD[3]; -+ uint8 uartfcr; -+ uint8 PAD[3]; -+ uint8 uartlcr; -+ uint8 PAD[3]; -+ uint8 uartmcr; -+ uint8 PAD[3]; -+ uint8 uartlsr; -+ uint8 PAD[3]; -+ uint8 uartmsr; -+ uint8 PAD[3]; -+ uint8 uartscratch; -+ uint8 PAD[3]; -+} extifregs_t; -+ -+/* corecontrol */ -+#define CC_UE (1 << 0) /* uart enable */ -+ -+/* extstatus */ -+#define ES_EM (1 << 0) /* endian mode (ro) */ -+#define ES_EI (1 << 1) /* external interrupt pin (ro) */ -+#define ES_GI (1 << 2) /* gpio interrupt pin (ro) */ -+ -+/* gpio bit mask */ -+#define GPIO_BIT0 (1 << 0) -+#define GPIO_BIT1 (1 << 1) -+#define GPIO_BIT2 (1 << 2) -+#define GPIO_BIT3 (1 << 3) -+#define GPIO_BIT4 (1 << 4) -+#define GPIO_BIT5 (1 << 5) -+#define GPIO_BIT6 (1 << 6) -+#define GPIO_BIT7 (1 << 7) -+ -+ -+/* pcmcia/prog/flash_config */ -+#define CF_EN (1 << 0) /* enable */ -+#define CF_EM_MASK 0xe /* mode */ -+#define CF_EM_SHIFT 1 -+#define CF_EM_FLASH 0x0 /* flash/asynchronous mode */ -+#define CF_EM_SYNC 0x2 /* synchronous mode */ -+#define CF_EM_PCMCIA 0x4 /* pcmcia mode */ -+#define CF_DS (1 << 4) /* destsize: 0=8bit, 1=16bit */ -+#define CF_BS (1 << 5) /* byteswap */ -+#define CF_CD_MASK 0xc0 /* clock divider */ -+#define CF_CD_SHIFT 6 -+#define CF_CD_DIV2 0x0 /* backplane/2 */ -+#define CF_CD_DIV3 0x40 /* backplane/3 */ -+#define CF_CD_DIV4 0x80 /* backplane/4 */ -+#define CF_CE (1 << 8) /* clock enable */ -+#define CF_SB (1 << 9) /* size/bytestrobe (synch only) */ -+ -+/* pcmcia_memwait */ -+#define PM_W0_MASK 0x3f /* waitcount0 */ -+#define PM_W1_MASK 0x1f00 /* waitcount1 */ -+#define PM_W1_SHIFT 8 -+#define PM_W2_MASK 0x1f0000 /* waitcount2 */ -+#define PM_W2_SHIFT 16 -+#define PM_W3_MASK 0x1f000000 /* waitcount3 */ -+#define PM_W3_SHIFT 24 -+ -+/* pcmcia_attrwait */ -+#define PA_W0_MASK 0x3f /* waitcount0 */ -+#define PA_W1_MASK 0x1f00 /* waitcount1 */ -+#define PA_W1_SHIFT 8 -+#define PA_W2_MASK 0x1f0000 /* waitcount2 */ -+#define PA_W2_SHIFT 16 -+#define PA_W3_MASK 0x1f000000 /* waitcount3 */ -+#define PA_W3_SHIFT 24 -+ -+/* pcmcia_iowait */ -+#define PI_W0_MASK 0x3f /* waitcount0 */ -+#define PI_W1_MASK 0x1f00 /* waitcount1 */ -+#define PI_W1_SHIFT 8 -+#define PI_W2_MASK 0x1f0000 /* waitcount2 */ -+#define PI_W2_SHIFT 16 -+#define PI_W3_MASK 0x1f000000 /* waitcount3 */ -+#define PI_W3_SHIFT 24 -+ -+/* prog_waitcount */ -+#define PW_W0_MASK 0x0000001f /* waitcount0 */ -+#define PW_W1_MASK 0x00001f00 /* waitcount1 */ -+#define PW_W1_SHIFT 8 -+#define PW_W2_MASK 0x001f0000 /* waitcount2 */ -+#define PW_W2_SHIFT 16 -+#define PW_W3_MASK 0x1f000000 /* waitcount3 */ -+#define PW_W3_SHIFT 24 -+ -+#define PW_W0 0x0000000c -+#define PW_W1 0x00000a00 -+#define PW_W2 0x00020000 -+#define PW_W3 0x01000000 -+ -+/* flash_waitcount */ -+#define FW_W0_MASK 0x1f /* waitcount0 */ -+#define FW_W1_MASK 0x1f00 /* waitcount1 */ -+#define FW_W1_SHIFT 8 -+#define FW_W2_MASK 0x1f0000 /* waitcount2 */ -+#define FW_W2_SHIFT 16 -+#define FW_W3_MASK 0x1f000000 /* waitcount3 */ -+#define FW_W3_SHIFT 24 -+ -+/* watchdog */ -+#define WATCHDOG_CLOCK 48000000 /* Hz */ -+ -+/* clockcontrol_n */ -+#define CN_N1_MASK 0x3f /* n1 control */ -+#define CN_N2_MASK 0x3f00 /* n2 control */ -+#define CN_N2_SHIFT 8 -+ -+/* clockcontrol_sb/pci/mii */ -+#define CC_M1_MASK 0x3f /* m1 control */ -+#define CC_M2_MASK 0x3f00 /* m2 control */ -+#define CC_M2_SHIFT 8 -+#define CC_M3_MASK 0x3f0000 /* m3 control */ -+#define CC_M3_SHIFT 16 -+#define CC_MC_MASK 0x1f000000 /* mux control */ -+#define CC_MC_SHIFT 24 -+ -+/* Clock control default values */ -+#define CC_DEF_N 0x0009 /* Default values for bcm4710 */ -+#define CC_DEF_100 0x04020011 -+#define CC_DEF_33 0x11030011 -+#define CC_DEF_25 0x11050011 -+ -+/* Clock control values for 125Mhz */ -+#define CC_125_N 0x0802 -+#define CC_125_M 0x04020009 -+#define CC_125_M25 0x11090009 -+#define CC_125_M33 0x11090005 -+ -+/* Clock control magic field values */ -+#define CC_F6_2 0x02 /* A factor of 2 in */ -+#define CC_F6_3 0x03 /* 6-bit fields like */ -+#define CC_F6_4 0x05 /* N1, M1 or M3 */ -+#define CC_F6_5 0x09 -+#define CC_F6_6 0x11 -+#define CC_F6_7 0x21 -+ -+#define CC_F5_BIAS 5 /* 5-bit fields get this added */ -+ -+#define CC_MC_BYPASS 0x08 -+#define CC_MC_M1 0x04 -+#define CC_MC_M1M2 0x02 -+#define CC_MC_M1M2M3 0x01 -+#define CC_MC_M1M3 0x11 -+ -+#define CC_CLOCK_BASE 24000000 /* Half the clock freq. in the 4710 */ -+ -+#endif /* _SBEXTIF_H */ -diff -urN linux.old/arch/mips/bcm947xx/include/sbhndmips.h linux.dev/arch/mips/bcm947xx/include/sbhndmips.h ---- linux.old/arch/mips/bcm947xx/include/sbhndmips.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/sbhndmips.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,47 @@ -+/* -+ * Broadcom SiliconBackplane MIPS definitions -+ * -+ * SB MIPS cores are custom MIPS32 processors with SiliconBackplane -+ * OCP interfaces. The CP0 processor ID is 0x00024000, where bits -+ * 23:16 mean Broadcom and bits 15:8 mean a MIPS core with an OCP -+ * interface. The core revision is stored in the SB ID register in SB -+ * configuration space. -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: sbhndmips.h,v 1.1.1.1 2006/02/27 03:43:16 honor Exp $ -+ */ -+ -+#ifndef _sbhndmips_h_ -+#define _sbhndmips_h_ -+ -+#include <mipsinc.h> -+ -+#ifndef _LANGUAGE_ASSEMBLY -+ -+/* cpp contortions to concatenate w/arg prescan */ -+#ifndef PAD -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+#endif /* PAD */ -+ -+typedef volatile struct { -+ uint32 corecontrol; -+ uint32 PAD[2]; -+ uint32 biststatus; -+ uint32 PAD[4]; -+ uint32 intstatus; -+ uint32 intmask; -+ uint32 timer; -+} mipsregs_t; -+ -+#endif /* _LANGUAGE_ASSEMBLY */ -+ -+#endif /* _sbhndmips_h_ */ -diff -urN linux.old/arch/mips/bcm947xx/include/sbmemc.h linux.dev/arch/mips/bcm947xx/include/sbmemc.h ---- linux.old/arch/mips/bcm947xx/include/sbmemc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/sbmemc.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,147 @@ -+/* -+ * BCM47XX Sonics SiliconBackplane DDR/SDRAM controller core hardware definitions. -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: sbmemc.h,v 1.6 2006/03/02 12:33:44 honor Exp $ -+ */ -+ -+#ifndef _SBMEMC_H -+#define _SBMEMC_H -+ -+#ifdef _LANGUAGE_ASSEMBLY -+ -+#define MEMC_CONTROL 0x00 -+#define MEMC_CONFIG 0x04 -+#define MEMC_REFRESH 0x08 -+#define MEMC_BISTSTAT 0x0c -+#define MEMC_MODEBUF 0x10 -+#define MEMC_BKCLS 0x14 -+#define MEMC_PRIORINV 0x18 -+#define MEMC_DRAMTIM 0x1c -+#define MEMC_INTSTAT 0x20 -+#define MEMC_INTMASK 0x24 -+#define MEMC_INTINFO 0x28 -+#define MEMC_NCDLCTL 0x30 -+#define MEMC_RDNCDLCOR 0x34 -+#define MEMC_WRNCDLCOR 0x38 -+#define MEMC_MISCDLYCTL 0x3c -+#define MEMC_DQSGATENCDL 0x40 -+#define MEMC_SPARE 0x44 -+#define MEMC_TPADDR 0x48 -+#define MEMC_TPDATA 0x4c -+#define MEMC_BARRIER 0x50 -+#define MEMC_CORE 0x54 -+ -+#else /* !_LANGUAGE_ASSEMBLY */ -+ -+/* Sonics side: MEMC core registers */ -+typedef volatile struct sbmemcregs { -+ uint32 control; -+ uint32 config; -+ uint32 refresh; -+ uint32 biststat; -+ uint32 modebuf; -+ uint32 bkcls; -+ uint32 priorinv; -+ uint32 dramtim; -+ uint32 intstat; -+ uint32 intmask; -+ uint32 intinfo; -+ uint32 reserved1; -+ uint32 ncdlctl; -+ uint32 rdncdlcor; -+ uint32 wrncdlcor; -+ uint32 miscdlyctl; -+ uint32 dqsgatencdl; -+ uint32 spare; -+ uint32 tpaddr; -+ uint32 tpdata; -+ uint32 barrier; -+ uint32 core; -+} sbmemcregs_t; -+ -+#endif /* _LANGUAGE_ASSEMBLY */ -+ -+/* MEMC Core Init values (OCP ID 0x80f) */ -+ -+/* For sdr: */ -+#define MEMC_SD_CONFIG_INIT 0x00048000 -+#define MEMC_SD_DRAMTIM2_INIT 0x000754d8 -+#define MEMC_SD_DRAMTIM3_INIT 0x000754da -+#define MEMC_SD_RDNCDLCOR_INIT 0x00000000 -+#define MEMC_SD_WRNCDLCOR_INIT 0x49351200 -+#define MEMC_SD1_WRNCDLCOR_INIT 0x14500200 /* For corerev 1 (4712) */ -+#define MEMC_SD_MISCDLYCTL_INIT 0x00061c1b -+#define MEMC_SD1_MISCDLYCTL_INIT 0x00021416 /* For corerev 1 (4712) */ -+#define MEMC_SD_CONTROL_INIT0 0x00000002 -+#define MEMC_SD_CONTROL_INIT1 0x00000008 -+#define MEMC_SD_CONTROL_INIT2 0x00000004 -+#define MEMC_SD_CONTROL_INIT3 0x00000010 -+#define MEMC_SD_CONTROL_INIT4 0x00000001 -+#define MEMC_SD_MODEBUF_INIT 0x00000000 -+#define MEMC_SD_REFRESH_INIT 0x0000840f -+ -+ -+/* This is for SDRM8X8X4 */ -+#define MEMC_SDR_INIT 0x0008 -+#define MEMC_SDR_MODE 0x32 -+#define MEMC_SDR_NCDL 0x00020032 -+#define MEMC_SDR1_NCDL 0x0002020f /* For corerev 1 (4712) */ -+ -+/* For ddr: */ -+#define MEMC_CONFIG_INIT 0x00048000 -+#define MEMC_DRAMTIM2_INIT 0x000754d8 -+#define MEMC_DRAMTIM25_INIT 0x000754d9 -+#define MEMC_RDNCDLCOR_INIT 0x00000000 -+#define MEMC_RDNCDLCOR_SIMINIT 0xf6f6f6f6 /* For hdl sim */ -+#define MEMC_WRNCDLCOR_INIT 0x49351200 -+#define MEMC_1_WRNCDLCOR_INIT 0x14500200 -+#define MEMC_DQSGATENCDL_INIT 0x00030000 -+#define MEMC_MISCDLYCTL_INIT 0x21061c1b -+#define MEMC_1_MISCDLYCTL_INIT 0x21021400 -+#define MEMC_NCDLCTL_INIT 0x00002001 -+#define MEMC_CONTROL_INIT0 0x00000002 -+#define MEMC_CONTROL_INIT1 0x00000008 -+#define MEMC_MODEBUF_INIT0 0x00004000 -+#define MEMC_CONTROL_INIT2 0x00000010 -+#define MEMC_MODEBUF_INIT1 0x00000100 -+#define MEMC_CONTROL_INIT3 0x00000010 -+#define MEMC_CONTROL_INIT4 0x00000008 -+#define MEMC_REFRESH_INIT 0x0000840f -+#define MEMC_CONTROL_INIT5 0x00000004 -+#define MEMC_MODEBUF_INIT2 0x00000000 -+#define MEMC_CONTROL_INIT6 0x00000010 -+#define MEMC_CONTROL_INIT7 0x00000001 -+ -+ -+/* This is for DDRM16X16X2 */ -+#define MEMC_DDR_INIT 0x0009 -+#define MEMC_DDR_MODE 0x62 -+#define MEMC_DDR_NCDL 0x0005050a -+#define MEMC_DDR1_NCDL 0x00000a0a /* For corerev 1 (4712) */ -+ -+/* mask for sdr/ddr calibration registers */ -+#define MEMC_RDNCDLCOR_RD_MASK 0x000000ff -+#define MEMC_WRNCDLCOR_WR_MASK 0x000000ff -+#define MEMC_DQSGATENCDL_G_MASK 0x000000ff -+ -+/* masks for miscdlyctl registers */ -+#define MEMC_MISC_SM_MASK 0x30000000 -+#define MEMC_MISC_SM_SHIFT 28 -+#define MEMC_MISC_SD_MASK 0x0f000000 -+#define MEMC_MISC_SD_SHIFT 24 -+ -+/* hw threshhold for calculating wr/rd for sdr memc */ -+#define MEMC_CD_THRESHOLD 128 -+ -+/* Low bit of init register says if memc is ddr or sdr */ -+#define MEMC_CONFIG_DDR 0x00000001 -+ -+#endif /* _SBMEMC_H */ -diff -urN linux.old/arch/mips/bcm947xx/include/sbpcie.h linux.dev/arch/mips/bcm947xx/include/sbpcie.h ---- linux.old/arch/mips/bcm947xx/include/sbpcie.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/sbpcie.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,200 @@ -+/* -+ * BCM43XX SiliconBackplane PCIE core hardware definitions. -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: sbpcie.h,v 1.1.1.2 2006/02/27 03:43:16 honor Exp $ -+ */ -+ -+#ifndef _SBPCIE_H -+#define _SBPCIE_H -+ -+/* cpp contortions to concatenate w/arg prescan */ -+#ifndef PAD -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+#endif -+ -+/* PCIE Enumeration space offsets */ -+#define PCIE_CORE_CONFIG_OFFSET 0x0 -+#define PCIE_FUNC0_CONFIG_OFFSET 0x400 -+#define PCIE_FUNC1_CONFIG_OFFSET 0x500 -+#define PCIE_FUNC2_CONFIG_OFFSET 0x600 -+#define PCIE_FUNC3_CONFIG_OFFSET 0x700 -+#define PCIE_SPROM_SHADOW_OFFSET 0x800 -+#define PCIE_SBCONFIG_OFFSET 0xE00 -+ -+/* PCIE Bar0 Address Mapping. Each function maps 16KB config space */ -+#define PCIE_DEV_BAR0_SIZE 0x4000 -+#define PCIE_BAR0_WINMAPCORE_OFFSET 0x0 -+#define PCIE_BAR0_EXTSPROM_OFFSET 0x1000 -+#define PCIE_BAR0_PCIECORE_OFFSET 0x2000 -+#define PCIE_BAR0_CCCOREREG_OFFSET 0x3000 -+ -+/* SB side: PCIE core and host control registers */ -+typedef struct sbpcieregs { -+ uint32 PAD[3]; -+ uint32 biststatus; /* bist Status: 0x00C */ -+ uint32 PAD[6]; -+ uint32 sbtopcimailbox; /* sb to pcie mailbox: 0x028 */ -+ uint32 PAD[54]; -+ uint32 sbtopcie0; /* sb to pcie translation 0: 0x100 */ -+ uint32 sbtopcie1; /* sb to pcie translation 1: 0x104 */ -+ uint32 sbtopcie2; /* sb to pcie translation 2: 0x108 */ -+ uint32 PAD[4]; -+ -+ /* pcie core supports in direct access to config space */ -+ uint32 configaddr; /* pcie config space access: Address field: 0x120 */ -+ uint32 configdata; /* pcie config space access: Data field: 0x124 */ -+ -+ /* mdio access to serdes */ -+ uint32 mdiocontrol; /* controls the mdio access: 0x128 */ -+ uint32 mdiodata; /* Data to the mdio access: 0x12c */ -+ -+ /* pcie protocol phy/dllp/tlp register access mechanism */ -+ uint32 pcieaddr; /* address of the internal registeru: 0x130 */ -+ uint32 pciedata; /* Data to/from the internal regsiter: 0x134 */ -+ -+ uint32 PAD[434]; -+ uint16 sprom[36]; /* SPROM shadow Area */ -+} sbpcieregs_t; -+ -+/* SB to PCIE translation masks */ -+#define SBTOPCIE0_MASK 0xfc000000 -+#define SBTOPCIE1_MASK 0xfc000000 -+#define SBTOPCIE2_MASK 0xc0000000 -+ -+/* Access type bits (0:1) */ -+#define SBTOPCIE_MEM 0 -+#define SBTOPCIE_IO 1 -+#define SBTOPCIE_CFG0 2 -+#define SBTOPCIE_CFG1 3 -+ -+/* Prefetch enable bit 2 */ -+#define SBTOPCIE_PF 4 -+ -+/* Write Burst enable for memory write bit 3 */ -+#define SBTOPCIE_WR_BURST 8 -+ -+/* config access */ -+#define CONFIGADDR_FUNC_MASK 0x7000 -+#define CONFIGADDR_FUNC_SHF 12 -+#define CONFIGADDR_REG_MASK 0x0FFF -+#define CONFIGADDR_REG_SHF 0 -+ -+/* PCIE protocol regs Indirect Address */ -+#define PCIEADDR_PROT_MASK 0x300 -+#define PCIEADDR_PROT_SHF 8 -+#define PCIEADDR_PL_TLP 0 -+#define PCIEADDR_PL_DLLP 1 -+#define PCIEADDR_PL_PLP 2 -+ -+/* PCIE protocol PHY diagnostic registers */ -+#define PCIE_PLP_MODEREG 0x200 /* Mode */ -+#define PCIE_PLP_STATUSREG 0x204 /* Status */ -+#define PCIE_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */ -+#define PCIE_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */ -+#define PCIE_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */ -+#define PCIE_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */ -+#define PCIE_PLP_ATTNREG 0x218 /* Attention */ -+#define PCIE_PLP_ATTNMASKREG 0x21C /* Attention Mask */ -+#define PCIE_PLP_RXERRCTR 0x220 /* Rx Error */ -+#define PCIE_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */ -+#define PCIE_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */ -+#define PCIE_PLP_TESTCTRLREG 0x22C /* Test Control reg */ -+#define PCIE_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */ -+#define PCIE_PLP_TIMINGOVRDREG 0x234 /* Timing param override */ -+#define PCIE_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */ -+#define PCIE_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */ -+ -+/* PCIE protocol DLLP diagnostic registers */ -+#define PCIE_DLLP_LCREG 0x100 /* Link Control */ -+#define PCIE_DLLP_LSREG 0x104 /* Link Status */ -+#define PCIE_DLLP_LAREG 0x108 /* Link Attention */ -+#define PCIE_DLLP_LAMASKREG 0x10C /* Link Attention Mask */ -+#define PCIE_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */ -+#define PCIE_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */ -+#define PCIE_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */ -+#define PCIE_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */ -+#define PCIE_DLLP_LRREG 0x120 /* Link Replay */ -+#define PCIE_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ -+#define PCIE_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ -+#define PCIE_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ -+#define PCIE_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ -+#define PCIE_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ -+#define PCIE_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */ -+#define PCIE_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */ -+#define PCIE_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */ -+#define PCIE_DLLP_ERRCTRREG 0x144 /* Error Counter */ -+#define PCIE_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */ -+#define PCIE_DLLP_TESTREG 0x14C /* Test */ -+#define PCIE_DLLP_PKTBIST 0x150 /* Packet BIST */ -+ -+/* PCIE protocol TLP diagnostic registers */ -+#define PCIE_TLP_CONFIGREG 0x000 /* Configuration */ -+#define PCIE_TLP_WORKAROUNDSREG 0x004 /* TLP Workarounds */ -+#define PCIE_TLP_WRDMAUPPER 0x010 /* Write DMA Upper Address */ -+#define PCIE_TLP_WRDMALOWER 0x014 /* Write DMA Lower Address */ -+#define PCIE_TLP_WRDMAREQ_LBEREG 0x018 /* Write DMA Len/ByteEn Req */ -+#define PCIE_TLP_RDDMAUPPER 0x01C /* Read DMA Upper Address */ -+#define PCIE_TLP_RDDMALOWER 0x020 /* Read DMA Lower Address */ -+#define PCIE_TLP_RDDMALENREG 0x024 /* Read DMA Len Req */ -+#define PCIE_TLP_MSIDMAUPPER 0x028 /* MSI DMA Upper Address */ -+#define PCIE_TLP_MSIDMALOWER 0x02C /* MSI DMA Lower Address */ -+#define PCIE_TLP_MSIDMALENREG 0x030 /* MSI DMA Len Req */ -+#define PCIE_TLP_SLVREQLENREG 0x034 /* Slave Request Len */ -+#define PCIE_TLP_FCINPUTSREQ 0x038 /* Flow Control Inputs */ -+#define PCIE_TLP_TXSMGRSREQ 0x03C /* Tx StateMachine and Gated Req */ -+#define PCIE_TLP_ADRACKCNTARBLEN 0x040 /* Address Ack XferCnt and ARB Len */ -+#define PCIE_TLP_DMACPLHDR0 0x044 /* DMA Completion Hdr 0 */ -+#define PCIE_TLP_DMACPLHDR1 0x048 /* DMA Completion Hdr 1 */ -+#define PCIE_TLP_DMACPLHDR2 0x04C /* DMA Completion Hdr 2 */ -+#define PCIE_TLP_DMACPLMISC0 0x050 /* DMA Completion Misc0 */ -+#define PCIE_TLP_DMACPLMISC1 0x054 /* DMA Completion Misc1 */ -+#define PCIE_TLP_DMACPLMISC2 0x058 /* DMA Completion Misc2 */ -+#define PCIE_TLP_SPTCTRLLEN 0x05C /* Split Controller Req len */ -+#define PCIE_TLP_SPTCTRLMSIC0 0x060 /* Split Controller Misc 0 */ -+#define PCIE_TLP_SPTCTRLMSIC1 0x064 /* Split Controller Misc 1 */ -+#define PCIE_TLP_BUSDEVFUNC 0x068 /* Bus/Device/Func */ -+#define PCIE_TLP_RESETCTR 0x06C /* Reset Counter */ -+#define PCIE_TLP_RTRYBUF 0x070 /* Retry Buffer value */ -+#define PCIE_TLP_TGTDEBUG1 0x074 /* Target Debug Reg1 */ -+#define PCIE_TLP_TGTDEBUG2 0x078 /* Target Debug Reg2 */ -+#define PCIE_TLP_TGTDEBUG3 0x07C /* Target Debug Reg3 */ -+#define PCIE_TLP_TGTDEBUG4 0x080 /* Target Debug Reg4 */ -+ -+/* MDIO control */ -+#define MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ -+#define MDIOCTL_DIVISOR_VAL 0x2 -+#define MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ -+#define MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */ -+ -+/* MDIO Data */ -+#define MDIODATA_MASK 0x0000ffff /* data 2 bytes */ -+#define MDIODATA_TA 0x00020000 /* Turnaround */ -+#define MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ -+#define MDIODATA_REGADDR_MASK 0x003c0000 /* Regaddr Mask */ -+#define MDIODATA_DEVADDR_SHF 22 /* Physmedia devaddr shift */ -+#define MDIODATA_DEVADDR_MASK 0x0fc00000 /* Physmedia devaddr Mask */ -+#define MDIODATA_WRITE 0x10000000 /* write Transaction */ -+#define MDIODATA_READ 0x20000000 /* Read Transaction */ -+#define MDIODATA_START 0x40000000 /* start of Transaction */ -+ -+/* MDIO devices (SERDES modules) */ -+#define MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ -+#define MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ -+#define MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ -+ -+/* SERDES registers */ -+#define SERDES_RX_TIMER1 2 /* Rx Timer1 */ -+#define SERDES_RX_CDR 6 /* CDR */ -+#define SERDES_RX_CDRBW 7 /* CDR BW */ -+ -+#endif /* _SBPCIE_H */ -diff -urN linux.old/arch/mips/bcm947xx/include/sbpci.h linux.dev/arch/mips/bcm947xx/include/sbpci.h ---- linux.old/arch/mips/bcm947xx/include/sbpci.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/sbpci.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,114 @@ -+/* -+ * HND SiliconBackplane PCI core hardware definitions. -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: sbpci.h,v 1.1.1.11 2006/02/27 03:43:16 honor Exp $ -+ */ -+ -+#ifndef _sbpci_h_ -+#define _sbpci_h_ -+ -+#ifndef _LANGUAGE_ASSEMBLY -+ -+/* cpp contortions to concatenate w/arg prescan */ -+#ifndef PAD -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+#endif -+ -+/* Sonics side: PCI core and host control registers */ -+typedef struct sbpciregs { -+ uint32 control; /* PCI control */ -+ uint32 PAD[3]; -+ uint32 arbcontrol; /* PCI arbiter control */ -+ uint32 PAD[3]; -+ uint32 intstatus; /* Interrupt status */ -+ uint32 intmask; /* Interrupt mask */ -+ uint32 sbtopcimailbox; /* Sonics to PCI mailbox */ -+ uint32 PAD[9]; -+ uint32 bcastaddr; /* Sonics broadcast address */ -+ uint32 bcastdata; /* Sonics broadcast data */ -+ uint32 PAD[2]; -+ uint32 gpioin; /* ro: gpio input (>=rev2) */ -+ uint32 gpioout; /* rw: gpio output (>=rev2) */ -+ uint32 gpioouten; /* rw: gpio output enable (>= rev2) */ -+ uint32 gpiocontrol; /* rw: gpio control (>= rev2) */ -+ uint32 PAD[36]; -+ uint32 sbtopci0; /* Sonics to PCI translation 0 */ -+ uint32 sbtopci1; /* Sonics to PCI translation 1 */ -+ uint32 sbtopci2; /* Sonics to PCI translation 2 */ -+ uint32 PAD[189]; -+ uint32 pcicfg[4][64]; /* 0x400 - 0x7FF, PCI Cfg Space (>=rev8) */ -+ uint16 sprom[36]; /* SPROM shadow Area */ -+ uint32 PAD[46]; -+} sbpciregs_t; -+ -+#endif /* _LANGUAGE_ASSEMBLY */ -+ -+/* PCI control */ -+#define PCI_RST_OE 0x01 /* When set, drives PCI_RESET out to pin */ -+#define PCI_RST 0x02 /* Value driven out to pin */ -+#define PCI_CLK_OE 0x04 /* When set, drives clock as gated by PCI_CLK out to pin */ -+#define PCI_CLK 0x08 /* Gate for clock driven out to pin */ -+ -+/* PCI arbiter control */ -+#define PCI_INT_ARB 0x01 /* When set, use an internal arbiter */ -+#define PCI_EXT_ARB 0x02 /* When set, use an external arbiter */ -+/* ParkID - for PCI corerev >= 8 */ -+#define PCI_PARKID_MASK 0x1c /* Selects which agent is parked on an idle bus */ -+#define PCI_PARKID_SHIFT 2 -+#define PCI_PARKID_EXT0 0 /* External master 0 */ -+#define PCI_PARKID_EXT1 1 /* External master 1 */ -+#define PCI_PARKID_EXT2 2 /* External master 2 */ -+#define PCI_PARKID_INT 3 /* Internal master */ -+#define PCI_PARKID_LAST 4 /* Last active master */ -+ -+/* Interrupt status/mask */ -+#define PCI_INTA 0x01 /* PCI INTA# is asserted */ -+#define PCI_INTB 0x02 /* PCI INTB# is asserted */ -+#define PCI_SERR 0x04 /* PCI SERR# has been asserted (write one to clear) */ -+#define PCI_PERR 0x08 /* PCI PERR# has been asserted (write one to clear) */ -+#define PCI_PME 0x10 /* PCI PME# is asserted */ -+ -+/* (General) PCI/SB mailbox interrupts, two bits per pci function */ -+#define MAILBOX_F0_0 0x100 /* function 0, int 0 */ -+#define MAILBOX_F0_1 0x200 /* function 0, int 1 */ -+#define MAILBOX_F1_0 0x400 /* function 1, int 0 */ -+#define MAILBOX_F1_1 0x800 /* function 1, int 1 */ -+#define MAILBOX_F2_0 0x1000 /* function 2, int 0 */ -+#define MAILBOX_F2_1 0x2000 /* function 2, int 1 */ -+#define MAILBOX_F3_0 0x4000 /* function 3, int 0 */ -+#define MAILBOX_F3_1 0x8000 /* function 3, int 1 */ -+ -+/* Sonics broadcast address */ -+#define BCAST_ADDR_MASK 0xff /* Broadcast register address */ -+ -+/* Sonics to PCI translation types */ -+#define SBTOPCI0_MASK 0xfc000000 -+#define SBTOPCI1_MASK 0xfc000000 -+#define SBTOPCI2_MASK 0xc0000000 -+#define SBTOPCI_MEM 0 -+#define SBTOPCI_IO 1 -+#define SBTOPCI_CFG0 2 -+#define SBTOPCI_CFG1 3 -+#define SBTOPCI_PREF 0x4 /* prefetch enable */ -+#define SBTOPCI_BURST 0x8 /* burst enable */ -+#define SBTOPCI_RC_MASK 0x30 /* read command (>= rev11) */ -+#define SBTOPCI_RC_READ 0x00 /* memory read */ -+#define SBTOPCI_RC_READLINE 0x10 /* memory read line */ -+#define SBTOPCI_RC_READMULTI 0x20 /* memory read multiple */ -+ -+/* PCI core index in SROM shadow area */ -+#define SRSH_PI_OFFSET 0 /* first word */ -+#define SRSH_PI_MASK 0xf000 /* bit 15:12 */ -+#define SRSH_PI_SHIFT 12 /* bit 15:12 */ -+ -+#endif /* _sbpci_h_ */ -diff -urN linux.old/arch/mips/bcm947xx/include/sbpcmcia.h linux.dev/arch/mips/bcm947xx/include/sbpcmcia.h ---- linux.old/arch/mips/bcm947xx/include/sbpcmcia.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/sbpcmcia.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,147 @@ -+/* -+ * BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions. -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: sbpcmcia.h,v 1.1.1.9 2006/02/27 03:43:16 honor Exp $ -+ */ -+ -+#ifndef _SBPCMCIA_H -+#define _SBPCMCIA_H -+ -+ -+/* All the addresses that are offsets in attribute space are divided -+ * by two to account for the fact that odd bytes are invalid in -+ * attribute space and our read/write routines make the space appear -+ * as if they didn't exist. Still we want to show the original numbers -+ * as documented in the hnd_pcmcia core manual. -+ */ -+ -+/* PCMCIA Function Configuration Registers */ -+#define PCMCIA_FCR (0x700 / 2) -+ -+#define FCR0_OFF 0 -+#define FCR1_OFF (0x40 / 2) -+#define FCR2_OFF (0x80 / 2) -+#define FCR3_OFF (0xc0 / 2) -+ -+#define PCMCIA_FCR0 (0x700 / 2) -+#define PCMCIA_FCR1 (0x740 / 2) -+#define PCMCIA_FCR2 (0x780 / 2) -+#define PCMCIA_FCR3 (0x7c0 / 2) -+ -+/* Standard PCMCIA FCR registers */ -+ -+#define PCMCIA_COR 0 -+ -+#define COR_RST 0x80 -+#define COR_LEV 0x40 -+#define COR_IRQEN 0x04 -+#define COR_BLREN 0x01 -+#define COR_FUNEN 0x01 -+ -+ -+#define PCICIA_FCSR (2 / 2) -+#define PCICIA_PRR (4 / 2) -+#define PCICIA_SCR (6 / 2) -+#define PCICIA_ESR (8 / 2) -+ -+ -+#define PCM_MEMOFF 0x0000 -+#define F0_MEMOFF 0x1000 -+#define F1_MEMOFF 0x2000 -+#define F2_MEMOFF 0x3000 -+#define F3_MEMOFF 0x4000 -+ -+/* Memory base in the function fcr's */ -+#define MEM_ADDR0 (0x728 / 2) -+#define MEM_ADDR1 (0x72a / 2) -+#define MEM_ADDR2 (0x72c / 2) -+ -+/* PCMCIA base plus Srom access in fcr0: */ -+#define PCMCIA_ADDR0 (0x072e / 2) -+#define PCMCIA_ADDR1 (0x0730 / 2) -+#define PCMCIA_ADDR2 (0x0732 / 2) -+ -+#define MEM_SEG (0x0734 / 2) -+#define SROM_CS (0x0736 / 2) -+#define SROM_DATAL (0x0738 / 2) -+#define SROM_DATAH (0x073a / 2) -+#define SROM_ADDRL (0x073c / 2) -+#define SROM_ADDRH (0x073e / 2) -+ -+/* Values for srom_cs: */ -+#define SROM_IDLE 0 -+#define SROM_WRITE 1 -+#define SROM_READ 2 -+#define SROM_WEN 4 -+#define SROM_WDS 7 -+#define SROM_DONE 8 -+ -+/* CIS stuff */ -+ -+/* The CIS stops where the FCRs start */ -+#define CIS_SIZE PCMCIA_FCR -+ -+/* Standard tuples we know about */ -+ -+#define CISTPL_MANFID 0x20 /* Manufacturer and device id */ -+#define CISTPL_FUNCE 0x22 /* Function extensions */ -+#define CISTPL_CFTABLE 0x1b /* Config table entry */ -+ -+/* Function extensions for LANs */ -+ -+#define LAN_TECH 1 /* Technology type */ -+#define LAN_SPEED 2 /* Raw bit rate */ -+#define LAN_MEDIA 3 /* Transmission media */ -+#define LAN_NID 4 /* Node identification (aka MAC addr) */ -+#define LAN_CONN 5 /* Connector standard */ -+ -+ -+/* CFTable */ -+#define CFTABLE_REGWIN_2K 0x08 /* 2k reg windows size */ -+#define CFTABLE_REGWIN_4K 0x10 /* 4k reg windows size */ -+#define CFTABLE_REGWIN_8K 0x20 /* 8k reg windows size */ -+ -+/* Vendor unique tuples are 0x80-0x8f. Within Broadcom we'll -+ * take one for HNBU, and use "extensions" (a la FUNCE) within it. -+ */ -+ -+#define CISTPL_BRCM_HNBU 0x80 -+ -+/* Subtypes of BRCM_HNBU: */ -+ -+#define HNBU_SROMREV 0x00 /* A byte with sromrev, 1 if not present */ -+#define HNBU_CHIPID 0x01 /* Two 16bit values: PCI vendor & device id */ -+#define HNBU_BOARDREV 0x02 /* One byte board revision */ -+#define HNBU_PAPARMS 0x03 /* PA parameters: 8 (sromrev == 1) -+ * or 9 (sromrev > 1) bytes -+ */ -+#define HNBU_OEM 0x04 /* Eight bytes OEM data (sromrev == 1) */ -+#define HNBU_CC 0x05 /* Default country code (sromrev == 1) */ -+#define HNBU_AA 0x06 /* Antennas available */ -+#define HNBU_AG 0x07 /* Antenna gain */ -+#define HNBU_BOARDFLAGS 0x08 /* board flags (2 or 4 bytes) */ -+#define HNBU_LEDS 0x09 /* LED set */ -+#define HNBU_CCODE 0x0a /* Country code (2 bytes ascii + 1 byte cctl) -+ * in rev 2 -+ */ -+#define HNBU_CCKPO 0x0b /* 2 byte cck power offsets in rev 3 */ -+#define HNBU_OFDMPO 0x0c /* 4 byte 11g ofdm power offsets in rev 3 */ -+#define HNBU_GPIOTIMER 0x0d /* 2 bytes with on/off values in rev 3 */ -+ -+ -+/* sbtmstatelow */ -+#define SBTML_INT_ACK 0x40000 /* ack the sb interrupt */ -+#define SBTML_INT_EN 0x20000 /* enable sb interrupt */ -+ -+/* sbtmstatehigh */ -+#define SBTMH_INT_STATUS 0x40000 /* sb interrupt status */ -+ -+#endif /* _SBPCMCIA_H */ -diff -urN linux.old/arch/mips/bcm947xx/include/sbsdram.h linux.dev/arch/mips/bcm947xx/include/sbsdram.h ---- linux.old/arch/mips/bcm947xx/include/sbsdram.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/sbsdram.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,85 @@ -+/* -+ * BCM47XX Sonics SiliconBackplane SDRAM controller core hardware definitions. -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: sbsdram.h,v 1.1.1.9 2006/03/02 13:03:52 honor Exp $ -+ */ -+ -+#ifndef _SBSDRAM_H -+#define _SBSDRAM_H -+ -+#ifndef _LANGUAGE_ASSEMBLY -+ -+/* Sonics side: SDRAM core registers */ -+typedef volatile struct sbsdramregs { -+ uint32 initcontrol; /* Generates external SDRAM initialization sequence */ -+ uint32 config; /* Initializes external SDRAM mode register */ -+ uint32 refresh; /* Controls external SDRAM refresh rate */ -+ uint32 pad1; -+ uint32 pad2; -+} sbsdramregs_t; -+ -+/* SDRAM simulation */ -+#ifdef RAMSZ -+#define SDRAMSZ RAMSZ -+#else -+#define SDRAMSZ (4 * 1024 * 1024) -+#endif -+ -+extern uchar sdrambuf[SDRAMSZ]; -+ -+#endif /* _LANGUAGE_ASSEMBLY */ -+ -+/* SDRAM initialization control (initcontrol) register bits */ -+#define SDRAM_CBR 0x0001 /* Writing 1 generates refresh cycle and toggles bit */ -+#define SDRAM_PRE 0x0002 /* Writing 1 generates precharge cycle and toggles bit */ -+#define SDRAM_MRS 0x0004 /* Writing 1 generates mode register select cycle and toggles bit */ -+#define SDRAM_EN 0x0008 /* When set, enables access to SDRAM */ -+#define SDRAM_16Mb 0x0000 /* Use 16 Megabit SDRAM */ -+#define SDRAM_64Mb 0x0010 /* Use 64 Megabit SDRAM */ -+#define SDRAM_128Mb 0x0020 /* Use 128 Megabit SDRAM */ -+#define SDRAM_RSVMb 0x0030 /* Use special SDRAM */ -+#define SDRAM_RST 0x0080 /* Writing 1 causes soft reset of controller */ -+#define SDRAM_SELFREF 0x0100 /* Writing 1 enables self refresh mode */ -+#define SDRAM_PWRDOWN 0x0200 /* Writing 1 causes controller to power down */ -+#define SDRAM_32BIT 0x0400 /* When set, indicates 32 bit SDRAM interface */ -+#define SDRAM_9BITCOL 0x0800 /* When set, indicates 9 bit column */ -+ -+/* SDRAM configuration (config) register bits */ -+#define SDRAM_BURSTFULL 0x0000 /* Use full page bursts */ -+#define SDRAM_BURST8 0x0001 /* Use burst of 8 */ -+#define SDRAM_BURST4 0x0002 /* Use burst of 4 */ -+#define SDRAM_BURST2 0x0003 /* Use burst of 2 */ -+#define SDRAM_CAS3 0x0000 /* Use CAS latency of 3 */ -+#define SDRAM_CAS2 0x0004 /* Use CAS latency of 2 */ -+ -+/* SDRAM refresh control (refresh) register bits */ -+#define SDRAM_REF(p) (((p)&0xff) | SDRAM_REF_EN) /* Refresh period */ -+#define SDRAM_REF_EN 0x8000 /* Writing 1 enables periodic refresh */ -+ -+/* SDRAM Core default Init values (OCP ID 0x803) */ -+#define SDRAM_INIT MEM4MX16X2 -+#define SDRAM_CONFIG SDRAM_BURSTFULL -+#define SDRAM_REFRESH SDRAM_REF(0x40) -+ -+#define MEM1MX16 0x009 /* 2 MB */ -+#define MEM1MX16X2 0x409 /* 4 MB */ -+#define MEM2MX8X2 0x809 /* 4 MB */ -+#define MEM2MX8X4 0xc09 /* 8 MB */ -+#define MEM2MX32 0x439 /* 8 MB */ -+#define MEM4MX16 0x019 /* 8 MB */ -+#define MEM4MX16X2 0x419 /* 16 MB */ -+#define MEM8MX8X2 0x819 /* 16 MB */ -+#define MEM8MX16 0x829 /* 16 MB */ -+#define MEM4MX32 0x429 /* 16 MB */ -+#define MEM8MX8X4 0xc19 /* 32 MB */ -+#define MEM8MX16X2 0xc29 /* 32 MB */ -+ -+#endif /* _SBSDRAM_H */ -diff -urN linux.old/arch/mips/bcm947xx/include/sbsocram.h linux.dev/arch/mips/bcm947xx/include/sbsocram.h ---- linux.old/arch/mips/bcm947xx/include/sbsocram.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/sbsocram.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,64 @@ -+/* -+ * BCM47XX Sonics SiliconBackplane embedded ram core -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: sbsocram.h,v 1.1.1.3 2006/02/27 03:43:16 honor Exp $ -+ */ -+ -+#ifndef _SBSOCRAM_H -+#define _SBSOCRAM_H -+ -+#define SR_COREINFO 0x00 -+#define SR_BWALLOC 0x04 -+#define SR_BISTSTAT 0x0c -+#define SR_BANKINDEX 0x10 -+#define SR_BANKSTBYCTL 0x14 -+ -+ -+#ifndef _LANGUAGE_ASSEMBLY -+ -+/* Memcsocram core registers */ -+typedef volatile struct sbsocramregs { -+ uint32 coreinfo; -+ uint32 bwalloc; -+ uint32 PAD; -+ uint32 biststat; -+ uint32 bankidx; -+ uint32 standbyctrl; -+} sbsocramregs_t; -+ -+#endif -+ -+/* Coreinfo register */ -+#define SRCI_PT_MASK 0x30000 -+#define SRCI_PT_SHIFT 16 -+ -+/* In corerev 0, the memory size is 2 to the power of the -+ * base plus 16 plus to the contents of the memsize field plus 1. -+ */ -+#define SRCI_MS0_MASK 0xf -+#define SR_MS0_BASE 16 -+ -+/* -+ * In corerev 1 the bank size is 2 ^ the bank size field plus 14, -+ * the memory size is number of banks times bank size. -+ * The same applies to rom size. -+ */ -+#define SRCI_ROMNB_MASK 0xf000 -+#define SRCI_ROMNB_SHIFT 12 -+#define SRCI_ROMBSZ_MASK 0xf00 -+#define SRCI_ROMBSZ_SHIFT 8 -+#define SRCI_SRNB_MASK 0xf0 -+#define SRCI_SRNB_SHIFT 4 -+#define SRCI_SRBSZ_MASK 0xf -+#define SRCI_SRBSZ_SHIFT 0 -+ -+#define SR_BSZ_BASE 14 -+#endif /* _SBSOCRAM_H */ -diff -urN linux.old/arch/mips/bcm947xx/include/sbutils.h linux.dev/arch/mips/bcm947xx/include/sbutils.h ---- linux.old/arch/mips/bcm947xx/include/sbutils.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/sbutils.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,151 @@ -+/* -+ * Misc utility routines for accessing chip-specific features -+ * of Broadcom HNBU SiliconBackplane-based chips. -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: sbutils.h,v 1.4 2006/04/08 07:12:42 honor Exp $ -+ */ -+ -+#ifndef _sbutils_h_ -+#define _sbutils_h_ -+ -+/* -+ * Datastructure to export all chip specific common variables -+ * public (read-only) portion of sbutils handle returned by -+ * sb_attach()/sb_kattach() -+*/ -+ -+struct sb_pub { -+ -+ uint bustype; /* SB_BUS, PCI_BUS */ -+ uint buscoretype; /* SB_PCI, SB_PCMCIA, SB_PCIE */ -+ uint buscorerev; /* buscore rev */ -+ uint buscoreidx; /* buscore index */ -+ int ccrev; /* chip common core rev */ -+ uint boardtype; /* board type */ -+ uint boardvendor; /* board vendor */ -+ uint chip; /* chip number */ -+ uint chiprev; /* chip revision */ -+ uint chippkg; /* chip package option */ -+ uint sonicsrev; /* sonics backplane rev */ -+}; -+ -+typedef const struct sb_pub sb_t; -+ -+/* -+ * Many of the routines below take an 'sbh' handle as their first arg. -+ * Allocate this by calling sb_attach(). Free it by calling sb_detach(). -+ * At any one time, the sbh is logically focused on one particular sb core -+ * (the "current core"). -+ * Use sb_setcore() or sb_setcoreidx() to change the association to another core. -+ */ -+ -+#define SB_OSH NULL /* Use for sb_kattach when no osh is available */ -+/* exported externs */ -+extern sb_t *sb_attach(uint pcidev, osl_t *osh, void *regs, uint bustype, -+ void *sdh, char **vars, uint *varsz); -+extern sb_t *sb_kattach(void); -+extern void sb_detach(sb_t *sbh); -+extern uint sb_chip(sb_t *sbh); -+extern uint sb_chiprev(sb_t *sbh); -+extern uint sb_chipcrev(sb_t *sbh); -+extern uint sb_chippkg(sb_t *sbh); -+extern uint sb_pcirev(sb_t *sbh); -+extern bool sb_war16165(sb_t *sbh); -+extern uint sb_pcmciarev(sb_t *sbh); -+extern uint sb_boardvendor(sb_t *sbh); -+extern uint sb_boardtype(sb_t *sbh); -+extern uint sb_bus(sb_t *sbh); -+extern uint sb_buscoretype(sb_t *sbh); -+extern uint sb_buscorerev(sb_t *sbh); -+extern uint sb_corelist(sb_t *sbh, uint coreid[]); -+extern uint sb_coreid(sb_t *sbh); -+extern uint sb_coreidx(sb_t *sbh); -+extern uint sb_coreunit(sb_t *sbh); -+extern uint sb_corevendor(sb_t *sbh); -+extern uint sb_corerev(sb_t *sbh); -+extern void *sb_osh(sb_t *sbh); -+extern void sb_setosh(sb_t *sbh, osl_t *osh); -+extern void *sb_coreregs(sb_t *sbh); -+extern uint32 sb_coreflags(sb_t *sbh, uint32 mask, uint32 val); -+extern uint32 sb_coreflagshi(sb_t *sbh, uint32 mask, uint32 val); -+extern bool sb_iscoreup(sb_t *sbh); -+extern void *sb_setcoreidx(sb_t *sbh, uint coreidx); -+extern void *sb_setcore(sb_t *sbh, uint coreid, uint coreunit); -+extern int sb_corebist(sb_t *sbh); -+extern void sb_commit(sb_t *sbh); -+extern uint32 sb_base(uint32 admatch); -+extern uint32 sb_size(uint32 admatch); -+extern void sb_core_reset(sb_t *sbh, uint32 bits, uint32 resetbits); -+extern void sb_core_tofixup(sb_t *sbh); -+extern void sb_core_disable(sb_t *sbh, uint32 bits); -+extern uint32 sb_clock_rate(uint32 pll_type, uint32 n, uint32 m); -+extern uint32 sb_clock(sb_t *sbh); -+extern void sb_pci_setup(sb_t *sbh, uint coremask); -+extern void sb_pcmcia_init(sb_t *sbh); -+extern void sb_watchdog(sb_t *sbh, uint ticks); -+extern void *sb_gpiosetcore(sb_t *sbh); -+extern uint32 sb_gpiocontrol(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); -+extern uint32 sb_gpioouten(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); -+extern uint32 sb_gpioout(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); -+extern uint32 sb_gpioin(sb_t *sbh); -+extern uint32 sb_gpiointpolarity(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); -+extern uint32 sb_gpiointmask(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); -+extern uint32 sb_gpioled(sb_t *sbh, uint32 mask, uint32 val); -+extern uint32 sb_gpioreserve(sb_t *sbh, uint32 gpio_num, uint8 priority); -+extern uint32 sb_gpiorelease(sb_t *sbh, uint32 gpio_num, uint8 priority); -+ -+extern void sb_clkctl_init(sb_t *sbh); -+extern uint16 sb_clkctl_fast_pwrup_delay(sb_t *sbh); -+extern bool sb_clkctl_clk(sb_t *sbh, uint mode); -+extern int sb_clkctl_xtal(sb_t *sbh, uint what, bool on); -+extern void sb_register_intr_callback(sb_t *sbh, void *intrsoff_fn, void *intrsrestore_fn, -+ void *intrsenabled_fn, void *intr_arg); -+extern uint32 sb_set_initiator_to(sb_t *sbh, uint32 to); -+extern int sb_corepciid(sb_t *sbh, uint func, uint16 *pcivendor, uint16 *pcidevice, -+ uint8 *pciclass, uint8 *pcisubclass, uint8 *pciprogif, -+ uint8 *pciheader); -+extern uint sb_pcie_readreg(void *sbh, void* arg1, uint offset); -+extern uint sb_pcie_writereg(sb_t *sbh, void *arg1, uint offset, uint val); -+extern uint32 sb_gpiotimerval(sb_t *sbh, uint32 mask, uint32 val); -+extern bool sb_backplane64(sb_t *sbh); -+extern void sb_btcgpiowar(sb_t *sbh); -+ -+ -+ -+ -+extern bool sb_deviceremoved(sb_t *sbh); -+extern uint32 sb_socram_size(sb_t *sbh); -+ -+/* -+* Build device path. Path size must be >= SB_DEVPATH_BUFSZ. -+* The returned path is NULL terminated and has trailing '/'. -+* Return 0 on success, nonzero otherwise. -+*/ -+extern int sb_devpath(sb_t *sbh, char *path, int size); -+ -+/* clkctl xtal what flags */ -+#define XTAL 0x1 /* primary crystal oscillator (2050) */ -+#define PLL 0x2 /* main chip pll */ -+ -+/* clkctl clk mode */ -+#define CLK_FAST 0 /* force fast (pll) clock */ -+#define CLK_DYNAMIC 2 /* enable dynamic clock control */ -+ -+ -+/* GPIO usage priorities */ -+#define GPIO_DRV_PRIORITY 0 /* Driver */ -+#define GPIO_APP_PRIORITY 1 /* Application */ -+#define GPIO_HI_PRIORITY 2 /* Highest priority. Ignore GPIO reservation */ -+ -+/* device path */ -+#define SB_DEVPATH_BUFSZ 16 /* min buffer size in bytes */ -+ -+#endif /* _sbutils_h_ */ -diff -urN linux.old/arch/mips/bcm947xx/include/sflash.h linux.dev/arch/mips/bcm947xx/include/sflash.h ---- linux.old/arch/mips/bcm947xx/include/sflash.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/sflash.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,36 @@ -+/* -+ * Broadcom SiliconBackplane chipcommon serial flash interface -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: sflash.h,v 1.1.1.8 2006/02/27 03:43:16 honor Exp $ -+ */ -+ -+#ifndef _sflash_h_ -+#define _sflash_h_ -+ -+#include <typedefs.h> -+#include <sbchipc.h> -+ -+struct sflash { -+ uint blocksize; /* Block size */ -+ uint numblocks; /* Number of blocks */ -+ uint32 type; /* Type */ -+ uint size; /* Total size in bytes */ -+}; -+ -+/* Utility functions */ -+extern int sflash_poll(chipcregs_t *cc, uint offset); -+extern int sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf); -+extern int sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf); -+extern int sflash_erase(chipcregs_t *cc, uint offset); -+extern int sflash_commit(chipcregs_t *cc, uint offset, uint len, const uchar *buf); -+extern struct sflash * sflash_init(chipcregs_t *cc); -+ -+#endif /* _sflash_h_ */ -diff -urN linux.old/arch/mips/bcm947xx/include/trxhdr.h linux.dev/arch/mips/bcm947xx/include/trxhdr.h ---- linux.old/arch/mips/bcm947xx/include/trxhdr.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/trxhdr.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,33 @@ -+/* -+ * TRX image file header format. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ -+ -+#include <typedefs.h> -+ -+#define TRX_MAGIC 0x30524448 /* "HDR0" */ -+#define TRX_VERSION 1 -+#define TRX_MAX_LEN 0x3A0000 -+#define TRX_NO_HEADER 1 /* Do not write TRX header */ -+#define TRX_GZ_FILES 0x2 /* Contains up to TRX_MAX_OFFSET individual gzip files */ -+#define TRX_MAX_OFFSET 3 -+ -+struct trx_header { -+ uint32 magic; /* "HDR0" */ -+ uint32 len; /* Length of file including header */ -+ uint32 crc32; /* 32-bit CRC from flag_version to end of file */ -+ uint32 flag_version; /* 0:15 flags, 16:31 version */ -+ uint32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */ -+}; -+ -+/* Compatibility */ -+typedef struct trx_header TRXHDR, *PTRXHDR; -diff -urN linux.old/arch/mips/bcm947xx/include/typedefs.h linux.dev/arch/mips/bcm947xx/include/typedefs.h ---- linux.old/arch/mips/bcm947xx/include/typedefs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/include/typedefs.h 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,361 @@ -+/* -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id: typedefs.h,v 1.1.1.12 2006/04/08 06:13:40 honor Exp $ -+ */ -+ -+#ifndef _TYPEDEFS_H_ -+#define _TYPEDEFS_H_ -+ -+ -+/* Define 'SITE_TYPEDEFS' in the compile to include a site specific -+ * typedef file "site_typedefs.h". -+ * -+ * If 'SITE_TYPEDEFS' is not defined, then the "Inferred Typedefs" -+ * section of this file makes inferences about the compile environment -+ * based on defined symbols and possibly compiler pragmas. -+ * -+ * Following these two sections is the "Default Typedefs" -+ * section. This section is only prcessed if 'USE_TYPEDEF_DEFAULTS' is -+ * defined. This section has a default set of typedefs and a few -+ * proprocessor symbols (TRUE, FALSE, NULL, ...). -+ */ -+ -+#ifdef SITE_TYPEDEFS -+ -+/* -+ * Site Specific Typedefs -+ * -+ */ -+ -+#include "site_typedefs.h" -+ -+#else -+ -+/* -+ * Inferred Typedefs -+ * -+ */ -+ -+/* Infer the compile environment based on preprocessor symbols and pramas. -+ * Override type definitions as needed, and include configuration dependent -+ * header files to define types. -+ */ -+ -+#ifdef __cplusplus -+ -+#define TYPEDEF_BOOL -+#ifndef FALSE -+#define FALSE false -+#endif -+#ifndef TRUE -+#define TRUE true -+#endif -+ -+#else /* ! __cplusplus */ -+ -+#if defined(_WIN32) -+ -+#define TYPEDEF_BOOL -+typedef unsigned char bool; /* consistent w/BOOL */ -+ -+#endif /* _WIN32 */ -+ -+#endif /* ! __cplusplus */ -+ -+/* use the Windows ULONG_PTR type when compiling for 64 bit */ -+#if defined(_WIN64) -+#include <basetsd.h> -+#define TYPEDEF_UINTPTR -+typedef ULONG_PTR uintptr; -+#endif -+ -+ -+#if defined(_MINOSL_) -+#define _NEED_SIZE_T_ -+#endif -+ -+#if defined(_NEED_SIZE_T_) -+typedef long unsigned int size_t; -+#endif -+ -+#ifdef __DJGPP__ -+typedef long unsigned int size_t; -+#endif /* __DJGPP__ */ -+ -+#ifdef _MSC_VER /* Microsoft C */ -+#define TYPEDEF_INT64 -+#define TYPEDEF_UINT64 -+typedef signed __int64 int64; -+typedef unsigned __int64 uint64; -+#endif -+ -+#if defined(MACOSX) -+#define TYPEDEF_BOOL -+#endif -+ -+#if defined(__NetBSD__) -+#define TYPEDEF_ULONG -+#endif -+ -+ -+#if defined(linux) -+#define TYPEDEF_UINT -+#define TYPEDEF_USHORT -+#define TYPEDEF_ULONG -+#endif -+ -+#if !defined(linux) && !defined(_WIN32) && !defined(_CFE_) && \ -+ !defined(_HNDRTE_) && !defined(_MINOSL_) && !defined(__DJGPP__) -+#define TYPEDEF_UINT -+#define TYPEDEF_USHORT -+#endif -+ -+ -+/* Do not support the (u)int64 types with strict ansi for GNU C */ -+#if defined(__GNUC__) && defined(__STRICT_ANSI__) -+#define TYPEDEF_INT64 -+#define TYPEDEF_UINT64 -+#endif -+ -+/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode -+ * for singned or unsigned -+ */ -+#if defined(__ICL) -+ -+#define TYPEDEF_INT64 -+ -+#if defined(__STDC__) -+#define TYPEDEF_UINT64 -+#endif -+ -+#endif /* __ICL */ -+ -+#if !defined(_WIN32) && !defined(_CFE_) && !defined(_MINOSL_) && \ -+ !defined(__DJGPP__) -+ -+/* pick up ushort & uint from standard types.h */ -+#if defined(linux) && defined(__KERNEL__) -+ -+#include <linux/types.h> /* sys/types.h and linux/types.h are oil and water */ -+ -+#else -+ -+#include <sys/types.h> -+ -+#endif -+ -+#endif /* !_WIN32 && !PMON && !_CFE_ && !_HNDRTE_ && !_MINOSL_ && !__DJGPP__ */ -+ -+#if defined(MACOSX) -+ -+#ifdef __BIG_ENDIAN__ -+#define IL_BIGENDIAN -+#else -+#ifdef IL_BIGENDIAN -+#error "IL_BIGENDIAN was defined for a little-endian compile" -+#endif -+#endif /* __BIG_ENDIAN__ */ -+ -+#if !defined(__cplusplus) -+ -+#if defined(__i386__) -+typedef unsigned char bool; -+#else -+typedef unsigned int bool; -+#endif -+#define TYPE_BOOL 1 -+enum { -+ false = 0, -+ true = 1 -+}; -+ -+#if defined(KERNEL) -+#include <IOKit/IOTypes.h> -+#endif /* KERNEL */ -+ -+#endif /* __cplusplus */ -+ -+#endif /* MACOSX */ -+ -+ -+/* use the default typedefs in the next section of this file */ -+#define USE_TYPEDEF_DEFAULTS -+ -+#endif /* SITE_TYPEDEFS */ -+ -+ -+/* -+ * Default Typedefs -+ * -+ */ -+ -+#ifdef USE_TYPEDEF_DEFAULTS -+#undef USE_TYPEDEF_DEFAULTS -+ -+#ifndef TYPEDEF_BOOL -+typedef /* @abstract@ */ unsigned char bool; -+#endif -+ -+/* define uchar, ushort, uint, ulong */ -+ -+#ifndef TYPEDEF_UCHAR -+typedef unsigned char uchar; -+#endif -+ -+#ifndef TYPEDEF_USHORT -+typedef unsigned short ushort; -+#endif -+ -+#ifndef TYPEDEF_UINT -+typedef unsigned int uint; -+#endif -+ -+#ifndef TYPEDEF_ULONG -+typedef unsigned long ulong; -+#endif -+ -+/* define [u]int8/16/32/64, uintptr */ -+ -+#ifndef TYPEDEF_UINT8 -+typedef unsigned char uint8; -+#endif -+ -+#ifndef TYPEDEF_UINT16 -+typedef unsigned short uint16; -+#endif -+ -+#ifndef TYPEDEF_UINT32 -+typedef unsigned int uint32; -+#endif -+ -+#ifndef TYPEDEF_UINT64 -+typedef unsigned long long uint64; -+#endif -+ -+#ifndef TYPEDEF_UINTPTR -+typedef unsigned int uintptr; -+#endif -+ -+#ifndef TYPEDEF_INT8 -+typedef signed char int8; -+#endif -+ -+#ifndef TYPEDEF_INT16 -+typedef signed short int16; -+#endif -+ -+#ifndef TYPEDEF_INT32 -+typedef signed int int32; -+#endif -+ -+#ifndef TYPEDEF_INT64 -+typedef signed long long int64; -+#endif -+ -+/* define float32/64, float_t */ -+ -+#ifndef TYPEDEF_FLOAT32 -+typedef float float32; -+#endif -+ -+#ifndef TYPEDEF_FLOAT64 -+typedef double float64; -+#endif -+ -+/* -+ * abstracted floating point type allows for compile time selection of -+ * single or double precision arithmetic. Compiling with -DFLOAT32 -+ * selects single precision; the default is double precision. -+ */ -+ -+#ifndef TYPEDEF_FLOAT_T -+ -+#if defined(FLOAT32) -+typedef float32 float_t; -+#else /* default to double precision floating point */ -+typedef float64 float_t; -+#endif -+ -+#endif /* TYPEDEF_FLOAT_T */ -+ -+/* define macro values */ -+ -+#ifndef FALSE -+#define FALSE 0 -+#endif -+ -+#ifndef TRUE -+#define TRUE 1 /* TRUE */ -+#endif -+ -+#ifndef NULL -+#define NULL 0 -+#endif -+ -+#ifndef OFF -+#define OFF 0 -+#endif -+ -+#ifndef ON -+#define ON 1 /* ON = 1 */ -+#endif -+ -+#define AUTO (-1) /* Auto = -1 */ -+ -+/* define PTRSZ, INLINE */ -+ -+#ifndef PTRSZ -+#define PTRSZ sizeof(char*) -+#endif -+ -+#ifndef INLINE -+ -+#ifdef _MSC_VER -+ -+#define INLINE __inline -+ -+#elif __GNUC__ -+ -+#define INLINE __inline__ -+ -+#else -+ -+#define INLINE -+ -+#endif /* _MSC_VER */ -+ -+#endif /* INLINE */ -+ -+#undef TYPEDEF_BOOL -+#undef TYPEDEF_UCHAR -+#undef TYPEDEF_USHORT -+#undef TYPEDEF_UINT -+#undef TYPEDEF_ULONG -+#undef TYPEDEF_UINT8 -+#undef TYPEDEF_UINT16 -+#undef TYPEDEF_UINT32 -+#undef TYPEDEF_UINT64 -+#undef TYPEDEF_UINTPTR -+#undef TYPEDEF_INT8 -+#undef TYPEDEF_INT16 -+#undef TYPEDEF_INT32 -+#undef TYPEDEF_INT64 -+#undef TYPEDEF_FLOAT32 -+#undef TYPEDEF_FLOAT64 -+#undef TYPEDEF_FLOAT_T -+ -+#endif /* USE_TYPEDEF_DEFAULTS */ -+ -+/* -+ * Including the bcmdefs.h here, to make sure everyone including typedefs.h -+ * gets this automatically -+*/ -+#include "bcmdefs.h" -+ -+#endif /* _TYPEDEFS_H_ */ -diff -urN linux.old/arch/mips/bcm947xx/Makefile linux.dev/arch/mips/bcm947xx/Makefile ---- linux.old/arch/mips/bcm947xx/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/Makefile 2006-10-02 21:26:08.000000000 +0200 -@@ -0,0 +1,17 @@ -+# -+# Makefile for the BCM947xx specific kernel interface routines -+# under Linux. -+# -+ -+EXTRA_CFLAGS+=-I$(TOPDIR)/arch/mips/bcm947xx/include -DBCMDRIVER -fno-delayed-branch -+ -+O_TARGET := bcm947xx.o -+ -+export-objs := export.o -+obj-y := prom.o setup.o time.o sbmips.o gpio.o -+obj-y += nvram.o nvram_linux.o sflash.o cfe_env.o -+obj-y += sbutils.o bcmutils.o bcmsrom.o hndchipc.o -+obj-$(CONFIG_PCI) += sbpci.o pcibios.o -+obj-y += export.o -+ -+include $(TOPDIR)/Rules.make -diff -urN linux.old/arch/mips/bcm947xx/nvram.c linux.dev/arch/mips/bcm947xx/nvram.c ---- linux.old/arch/mips/bcm947xx/nvram.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/nvram.c 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,315 @@ -+/* -+ * NVRAM variable manipulation (common) -+ * -+ * Copyright 2004, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ */ -+ -+#include <typedefs.h> -+#include <osl.h> -+#include <bcmendian.h> -+#include <bcmnvram.h> -+#include <bcmutils.h> -+#include <sbsdram.h> -+ -+extern struct nvram_tuple * BCMINIT(_nvram_realloc)(struct nvram_tuple *t, const char *name, const char *value); -+extern void BCMINIT(_nvram_free)(struct nvram_tuple *t); -+extern int BCMINIT(_nvram_read)(void *buf); -+ -+char * BCMINIT(_nvram_get)(const char *name); -+int BCMINIT(_nvram_set)(const char *name, const char *value); -+int BCMINIT(_nvram_unset)(const char *name); -+int BCMINIT(_nvram_getall)(char *buf, int count); -+int BCMINIT(_nvram_commit)(struct nvram_header *header); -+int BCMINIT(_nvram_init)(void); -+void BCMINIT(_nvram_exit)(void); -+ -+static struct nvram_tuple * BCMINITDATA(nvram_hash)[257]; -+static struct nvram_tuple * nvram_dead; -+ -+/* Free all tuples. Should be locked. */ -+static void -+BCMINITFN(nvram_free)(void) -+{ -+ uint i; -+ struct nvram_tuple *t, *next; -+ -+ /* Free hash table */ -+ for (i = 0; i < ARRAYSIZE(BCMINIT(nvram_hash)); i++) { -+ for (t = BCMINIT(nvram_hash)[i]; t; t = next) { -+ next = t->next; -+ BCMINIT(_nvram_free)(t); -+ } -+ BCMINIT(nvram_hash)[i] = NULL; -+ } -+ -+ /* Free dead table */ -+ for (t = nvram_dead; t; t = next) { -+ next = t->next; -+ BCMINIT(_nvram_free)(t); -+ } -+ nvram_dead = NULL; -+ -+ /* Indicate to per-port code that all tuples have been freed */ -+ BCMINIT(_nvram_free)(NULL); -+} -+ -+/* String hash */ -+static INLINE uint -+hash(const char *s) -+{ -+ uint hash = 0; -+ -+ while (*s) -+ hash = 31 * hash + *s++; -+ -+ return hash; -+} -+ -+/* (Re)initialize the hash table. Should be locked. */ -+static int -+BCMINITFN(nvram_rehash)(struct nvram_header *header) -+{ -+ char buf[] = "0xXXXXXXXX", *name, *value, *end, *eq; -+ -+ /* (Re)initialize hash table */ -+ BCMINIT(nvram_free)(); -+ -+ /* Parse and set "name=value\0 ... \0\0" */ -+ name = (char *) &header[1]; -+ end = (char *) header + NVRAM_SPACE - 2; -+ end[0] = end[1] = '\0'; -+ for (; *name; name = value + strlen(value) + 1) { -+ if (!(eq = strchr(name, '='))) -+ break; -+ *eq = '\0'; -+ value = eq + 1; -+ BCMINIT(_nvram_set)(name, value); -+ *eq = '='; -+ } -+ -+ /* Set special SDRAM parameters */ -+ if (!BCMINIT(_nvram_get)("sdram_init")) { -+ sprintf(buf, "0x%04X", (uint16)(header->crc_ver_init >> 16)); -+ BCMINIT(_nvram_set)("sdram_init", buf); -+ } -+ if (!BCMINIT(_nvram_get)("sdram_config")) { -+ sprintf(buf, "0x%04X", (uint16)(header->config_refresh & 0xffff)); -+ BCMINIT(_nvram_set)("sdram_config", buf); -+ } -+ if (!BCMINIT(_nvram_get)("sdram_refresh")) { -+ sprintf(buf, "0x%04X", (uint16)((header->config_refresh >> 16) & 0xffff)); -+ BCMINIT(_nvram_set)("sdram_refresh", buf); -+ } -+ if (!BCMINIT(_nvram_get)("sdram_ncdl")) { -+ sprintf(buf, "0x%08X", header->config_ncdl); -+ BCMINIT(_nvram_set)("sdram_ncdl", buf); -+ } -+ -+ return 0; -+} -+ -+/* Get the value of an NVRAM variable. Should be locked. */ -+char * -+BCMINITFN(_nvram_get)(const char *name) -+{ -+ uint i; -+ struct nvram_tuple *t; -+ char *value; -+ -+ if (!name) -+ return NULL; -+ -+ /* Hash the name */ -+ i = hash(name) % ARRAYSIZE(BCMINIT(nvram_hash)); -+ -+ /* Find the associated tuple in the hash table */ -+ for (t = BCMINIT(nvram_hash)[i]; t && strcmp(t->name, name); t = t->next); -+ -+ value = t ? t->value : NULL; -+ -+ return value; -+} -+ -+/* Get the value of an NVRAM variable. Should be locked. */ -+int -+BCMINITFN(_nvram_set)(const char *name, const char *value) -+{ -+ uint i; -+ struct nvram_tuple *t, *u, **prev; -+ -+ /* Hash the name */ -+ i = hash(name) % ARRAYSIZE(BCMINIT(nvram_hash)); -+ -+ /* Find the associated tuple in the hash table */ -+ for (prev = &BCMINIT(nvram_hash)[i], t = *prev; t && strcmp(t->name, name); prev = &t->next, t = *prev); -+ -+ /* (Re)allocate tuple */ -+ if (!(u = BCMINIT(_nvram_realloc)(t, name, value))) -+ return -12; /* -ENOMEM */ -+ -+ /* Value reallocated */ -+ if (t && t == u) -+ return 0; -+ -+ /* Move old tuple to the dead table */ -+ if (t) { -+ *prev = t->next; -+ t->next = nvram_dead; -+ nvram_dead = t; -+ } -+ -+ /* Add new tuple to the hash table */ -+ u->next = BCMINIT(nvram_hash)[i]; -+ BCMINIT(nvram_hash)[i] = u; -+ -+ return 0; -+} -+ -+/* Unset the value of an NVRAM variable. Should be locked. */ -+int -+BCMINITFN(_nvram_unset)(const char *name) -+{ -+ uint i; -+ struct nvram_tuple *t, **prev; -+ -+ if (!name) -+ return 0; -+ -+ /* Hash the name */ -+ i = hash(name) % ARRAYSIZE(BCMINIT(nvram_hash)); -+ -+ /* Find the associated tuple in the hash table */ -+ for (prev = &BCMINIT(nvram_hash)[i], t = *prev; t && strcmp(t->name, name); prev = &t->next, t = *prev); -+ -+ /* Move it to the dead table */ -+ if (t) { -+ *prev = t->next; -+ t->next = nvram_dead; -+ nvram_dead = t; -+ } -+ -+ return 0; -+} -+ -+/* Get all NVRAM variables. Should be locked. */ -+int -+BCMINITFN(_nvram_getall)(char *buf, int count) -+{ -+ uint i; -+ struct nvram_tuple *t; -+ int len = 0; -+ -+ bzero(buf, count); -+ -+ /* Write name=value\0 ... \0\0 */ -+ for (i = 0; i < ARRAYSIZE(BCMINIT(nvram_hash)); i++) { -+ for (t = BCMINIT(nvram_hash)[i]; t; t = t->next) { -+ if ((count - len) > (strlen(t->name) + 1 + strlen(t->value) + 1)) -+ len += sprintf(buf + len, "%s=%s", t->name, t->value) + 1; -+ else -+ break; -+ } -+ } -+ -+ return 0; -+} -+ -+/* Regenerate NVRAM. Should be locked. */ -+int -+BCMINITFN(_nvram_commit)(struct nvram_header *header) -+{ -+ char *init, *config, *refresh, *ncdl; -+ char *ptr, *end; -+ int i; -+ struct nvram_tuple *t; -+ struct nvram_header tmp; -+ uint8 crc; -+ -+ /* Regenerate header */ -+ header->magic = NVRAM_MAGIC; -+ header->crc_ver_init = (NVRAM_VERSION << 8); -+ if (!(init = BCMINIT(_nvram_get)("sdram_init")) || -+ !(config = BCMINIT(_nvram_get)("sdram_config")) || -+ !(refresh = BCMINIT(_nvram_get)("sdram_refresh")) || -+ !(ncdl = BCMINIT(_nvram_get)("sdram_ncdl"))) { -+ header->crc_ver_init |= SDRAM_INIT << 16; -+ header->config_refresh = SDRAM_CONFIG; -+ header->config_refresh |= SDRAM_REFRESH << 16; -+ header->config_ncdl = 0; -+ } else { -+ header->crc_ver_init |= (bcm_strtoul(init, NULL, 0) & 0xffff) << 16; -+ header->config_refresh = bcm_strtoul(config, NULL, 0) & 0xffff; -+ header->config_refresh |= (bcm_strtoul(refresh, NULL, 0) & 0xffff) << 16; -+ header->config_ncdl = bcm_strtoul(ncdl, NULL, 0); -+ } -+ -+ /* Clear data area */ -+ ptr = (char *) header + sizeof(struct nvram_header); -+ bzero(ptr, NVRAM_SPACE - sizeof(struct nvram_header)); -+ -+ /* Leave space for a double NUL at the end */ -+ end = (char *) header + NVRAM_SPACE - 2; -+ -+ /* Write out all tuples */ -+ for (i = 0; i < ARRAYSIZE(BCMINIT(nvram_hash)); i++) { -+ for (t = BCMINIT(nvram_hash)[i]; t; t = t->next) { -+ if ((ptr + strlen(t->name) + 1 + strlen(t->value) + 1) > end) -+ break; -+ ptr += sprintf(ptr, "%s=%s", t->name, t->value) + 1; -+ } -+ } -+ -+ /* End with a double NUL */ -+ ptr += 2; -+ -+ /* Set new length */ -+ header->len = ROUNDUP(ptr - (char *) header, 4); -+ -+ /* Little-endian CRC8 over the last 11 bytes of the header */ -+ tmp.crc_ver_init = htol32(header->crc_ver_init); -+ tmp.config_refresh = htol32(header->config_refresh); -+ tmp.config_ncdl = htol32(header->config_ncdl); -+ crc = hndcrc8((char *) &tmp + 9, sizeof(struct nvram_header) - 9, CRC8_INIT_VALUE); -+ -+ /* Continue CRC8 over data bytes */ -+ crc = hndcrc8((char *) &header[1], header->len - sizeof(struct nvram_header), crc); -+ -+ /* Set new CRC8 */ -+ header->crc_ver_init |= crc; -+ -+ /* Reinitialize hash table */ -+ return BCMINIT(nvram_rehash)(header); -+} -+ -+/* Initialize hash table. Should be locked. */ -+int -+BCMINITFN(_nvram_init)(void) -+{ -+ struct nvram_header *header; -+ int ret; -+ -+ if (!(header = (struct nvram_header *) kmalloc(NVRAM_SPACE, GFP_ATOMIC))) { -+ return -12; /* -ENOMEM */ -+ } -+ -+ if ((ret = BCMINIT(_nvram_read)(header)) == 0 && -+ header->magic == NVRAM_MAGIC) -+ BCMINIT(nvram_rehash)(header); -+ -+ kfree(header); -+ return ret; -+} -+ -+/* Free hash table. Should be locked. */ -+void -+BCMINITFN(_nvram_exit)(void) -+{ -+ BCMINIT(nvram_free)(); -+} -diff -urN linux.old/arch/mips/bcm947xx/nvram_linux.c linux.dev/arch/mips/bcm947xx/nvram_linux.c ---- linux.old/arch/mips/bcm947xx/nvram_linux.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/nvram_linux.c 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,723 @@ -+/* -+ * NVRAM variable manipulation (Linux kernel half) -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: nvram_linux.c,v 1.19 2006/04/08 07:12:42 honor Exp $ -+ */ -+ -+#include <linux/config.h> -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/string.h> -+#include <linux/interrupt.h> -+#include <linux/spinlock.h> -+#include <linux/slab.h> -+#include <linux/bootmem.h> -+#include <linux/wrapper.h> -+#include <linux/fs.h> -+#include <linux/miscdevice.h> -+#include <linux/mtd/mtd.h> -+#include <asm/addrspace.h> -+#include <asm/io.h> -+#include <asm/uaccess.h> -+ -+#include <typedefs.h> -+#include <osl.h> -+#include <bcmendian.h> -+#include <bcmnvram.h> -+#include <bcmutils.h> -+#include <sbconfig.h> -+#include <sbchipc.h> -+#include <sbutils.h> -+#include <hndmips.h> -+#include <sflash.h> -+ -+/* In BSS to minimize text size and page aligned so it can be mmap()-ed */ -+static char nvram_buf[NVRAM_SPACE] __attribute__((aligned(PAGE_SIZE))); -+ -+#ifdef MODULE -+ -+#define early_nvram_get(name) nvram_get(name) -+ -+#else /* !MODULE */ -+ -+/* Global SB handle */ -+extern void *bcm947xx_sbh; -+extern spinlock_t bcm947xx_sbh_lock; -+ -+static int cfe_env; -+extern char *cfe_env_get(char *nv_buf, const char *name); -+ -+/* Convenience */ -+#define sbh bcm947xx_sbh -+#define sbh_lock bcm947xx_sbh_lock -+#define KB * 1024 -+#define MB * 1024 * 1024 -+ -+/* Probe for NVRAM header */ -+static void __init -+early_nvram_init(void) -+{ -+ struct nvram_header *header; -+ chipcregs_t *cc; -+ struct sflash *info = NULL; -+ int i; -+ uint32 base, off, lim; -+ u32 *src, *dst; -+ -+ if ((cc = sb_setcore(sbh, SB_CC, 0)) != NULL) { -+ base = KSEG1ADDR(SB_FLASH2); -+ switch (readl(&cc->capabilities) & CAP_FLASH_MASK) { -+ case PFLASH: -+ lim = SB_FLASH2_SZ; -+ break; -+ -+ case SFLASH_ST: -+ case SFLASH_AT: -+ if ((info = sflash_init(cc)) == NULL) -+ return; -+ lim = info->size; -+ break; -+ -+ case FLASH_NONE: -+ default: -+ return; -+ } -+ } else { -+ /* extif assumed, Stop at 4 MB */ -+ base = KSEG1ADDR(SB_FLASH1); -+ lim = SB_FLASH1_SZ; -+ } -+ -+ /* XXX: hack for supporting the CFE environment stuff on WGT634U */ -+ src = (u32 *) KSEG1ADDR(base + 8 * 1024 * 1024 - 0x2000); -+ dst = (u32 *) nvram_buf; -+ if ((lim == 0x02000000) && ((*src & 0xff00ff) == 0x000001)) { -+ printk("early_nvram_init: WGT634U NVRAM found.\n"); -+ -+ for (i = 0; i < 0x1ff0; i++) { -+ if (*src == 0xFFFFFFFF) -+ break; -+ *dst++ = *src++; -+ } -+ cfe_env = 1; -+ return; -+ } -+ -+ off = FLASH_MIN; -+ while (off <= lim) { -+ /* Windowed flash access */ -+ header = (struct nvram_header *) KSEG1ADDR(base + off - NVRAM_SPACE); -+ if (header->magic == NVRAM_MAGIC) -+ goto found; -+ off <<= 1; -+ } -+ -+ /* Try embedded NVRAM at 4 KB and 1 KB as last resorts */ -+ header = (struct nvram_header *) KSEG1ADDR(base + 4 KB); -+ if (header->magic == NVRAM_MAGIC) -+ goto found; -+ -+ header = (struct nvram_header *) KSEG1ADDR(base + 1 KB); -+ if (header->magic == NVRAM_MAGIC) -+ goto found; -+ -+ printk("early_nvram_init: NVRAM not found\n"); -+ return; -+ -+found: -+ src = (u32 *) header; -+ dst = (u32 *) nvram_buf; -+ for (i = 0; i < sizeof(struct nvram_header); i += 4) -+ *dst++ = *src++; -+ for (; i < header->len && i < NVRAM_SPACE; i += 4) -+ *dst++ = ltoh32(*src++); -+} -+ -+/* Early (before mm or mtd) read-only access to NVRAM */ -+static char * __init -+early_nvram_get(const char *name) -+{ -+ char *var, *value, *end, *eq; -+ -+ if (!name) -+ return NULL; -+ -+ /* Too early? */ -+ if (sbh == NULL) -+ return NULL; -+ -+ if (!nvram_buf[0]) -+ early_nvram_init(); -+ -+ if (cfe_env) -+ return cfe_env_get(nvram_buf, name); -+ -+ /* Look for name=value and return value */ -+ var = &nvram_buf[sizeof(struct nvram_header)]; -+ end = nvram_buf + sizeof(nvram_buf) - 2; -+ end[0] = end[1] = '\0'; -+ for (; *var; var = value + strlen(value) + 1) { -+ if (!(eq = strchr(var, '='))) -+ break; -+ value = eq + 1; -+ if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0) -+ return value; -+ } -+ -+ return NULL; -+} -+ -+static int __init -+early_nvram_getall(char *buf, int count) -+{ -+ char *var, *end; -+ int len = 0; -+ -+ /* Too early? */ -+ if (sbh == NULL) -+ return -1; -+ -+ if (!nvram_buf[0]) -+ early_nvram_init(); -+ -+ bzero(buf, count); -+ -+ /* Write name=value\0 ... \0\0 */ -+ var = &nvram_buf[sizeof(struct nvram_header)]; -+ end = nvram_buf + sizeof(nvram_buf) - 2; -+ end[0] = end[1] = '\0'; -+ for (; *var; var += strlen(var) + 1) { -+ if ((count - len) <= (strlen(var) + 1)) -+ break; -+ len += sprintf(buf + len, "%s", var) + 1; -+ } -+ -+ return 0; -+} -+#endif /* !MODULE */ -+ -+extern char * _nvram_get(const char *name); -+extern int _nvram_set(const char *name, const char *value); -+extern int _nvram_unset(const char *name); -+extern int _nvram_getall(char *buf, int count); -+extern int _nvram_commit(struct nvram_header *header); -+extern int _nvram_init(void *sbh); -+extern void _nvram_exit(void); -+ -+/* Globals */ -+static spinlock_t nvram_lock = SPIN_LOCK_UNLOCKED; -+static struct semaphore nvram_sem; -+static unsigned long nvram_offset = 0; -+static int nvram_major = -1; -+static devfs_handle_t nvram_handle = NULL; -+static struct mtd_info *nvram_mtd = NULL; -+ -+int -+_nvram_read(char *buf) -+{ -+ struct nvram_header *header = (struct nvram_header *) buf; -+ size_t len; -+ -+ if (!nvram_mtd || -+ MTD_READ(nvram_mtd, nvram_mtd->size - NVRAM_SPACE, NVRAM_SPACE, &len, buf) || -+ len != NVRAM_SPACE || -+ header->magic != NVRAM_MAGIC) { -+ /* Maybe we can recover some data from early initialization */ -+ memcpy(buf, nvram_buf, NVRAM_SPACE); -+ } -+ -+ return 0; -+} -+ -+struct nvram_tuple * -+_nvram_realloc(struct nvram_tuple *t, const char *name, const char *value) -+{ -+ if ((nvram_offset + strlen(value) + 1) > NVRAM_SPACE) -+ return NULL; -+ -+ if (!t) { -+ if (!(t = kmalloc(sizeof(struct nvram_tuple) + strlen(name) + 1, GFP_ATOMIC))) -+ return NULL; -+ -+ /* Copy name */ -+ t->name = (char *) &t[1]; -+ strcpy(t->name, name); -+ -+ t->value = NULL; -+ } -+ -+ /* Copy value */ -+ if (!t->value || strcmp(t->value, value)) { -+ t->value = &nvram_buf[nvram_offset]; -+ strcpy(t->value, value); -+ nvram_offset += strlen(value) + 1; -+ } -+ -+ return t; -+} -+ -+void -+_nvram_free(struct nvram_tuple *t) -+{ -+ if (!t) -+ nvram_offset = 0; -+ else -+ kfree(t); -+} -+ -+int -+nvram_set(const char *name, const char *value) -+{ -+ unsigned long flags; -+ int ret; -+ struct nvram_header *header; -+ -+ spin_lock_irqsave(&nvram_lock, flags); -+ if ((ret = _nvram_set(name, value))) { -+ /* Consolidate space and try again */ -+ if ((header = kmalloc(NVRAM_SPACE, GFP_ATOMIC))) { -+ if (_nvram_commit(header) == 0) -+ ret = _nvram_set(name, value); -+ kfree(header); -+ } -+ } -+ spin_unlock_irqrestore(&nvram_lock, flags); -+ -+ return ret; -+} -+ -+char * -+real_nvram_get(const char *name) -+{ -+ unsigned long flags; -+ char *value; -+ -+ spin_lock_irqsave(&nvram_lock, flags); -+ value = _nvram_get(name); -+ spin_unlock_irqrestore(&nvram_lock, flags); -+ -+ return value; -+} -+ -+char * -+nvram_get(const char *name) -+{ -+ if (nvram_major >= 0) -+ return real_nvram_get(name); -+ else -+ return early_nvram_get(name); -+} -+ -+int -+nvram_unset(const char *name) -+{ -+ unsigned long flags; -+ int ret; -+ -+ spin_lock_irqsave(&nvram_lock, flags); -+ ret = _nvram_unset(name); -+ spin_unlock_irqrestore(&nvram_lock, flags); -+ -+ return ret; -+} -+ -+static void -+erase_callback(struct erase_info *done) -+{ -+ wait_queue_head_t *wait_q = (wait_queue_head_t *) done->priv; -+ wake_up(wait_q); -+} -+ -+int -+nvram_commit(void) -+{ -+ char *buf; -+ size_t erasesize, len, magic_len; -+ unsigned int i; -+ int ret; -+ struct nvram_header *header; -+ unsigned long flags; -+ u_int32_t offset; -+ DECLARE_WAITQUEUE(wait, current); -+ wait_queue_head_t wait_q; -+ struct erase_info erase; -+ u_int32_t magic_offset = 0; /* Offset for writing MAGIC # */ -+ -+ if (!nvram_mtd) { -+ printk("nvram_commit: NVRAM not found\n"); -+ return -ENODEV; -+ } -+ -+ if (in_interrupt()) { -+ printk("nvram_commit: not committing in interrupt\n"); -+ return -EINVAL; -+ } -+ -+ /* Backup sector blocks to be erased */ -+ erasesize = ROUNDUP(NVRAM_SPACE, nvram_mtd->erasesize); -+ if (!(buf = kmalloc(erasesize, GFP_KERNEL))) { -+ printk("nvram_commit: out of memory\n"); -+ return -ENOMEM; -+ } -+ -+ down(&nvram_sem); -+ -+ if ((i = erasesize - NVRAM_SPACE) > 0) { -+ offset = nvram_mtd->size - erasesize; -+ len = 0; -+ ret = MTD_READ(nvram_mtd, offset, i, &len, buf); -+ if (ret || len != i) { -+ printk("nvram_commit: read error ret = %d, len = %d/%d\n", ret, len, i); -+ ret = -EIO; -+ goto done; -+ } -+ header = (struct nvram_header *)(buf + i); -+ magic_offset = i + ((void *)&header->magic - (void *)header); -+ } else { -+ offset = nvram_mtd->size - NVRAM_SPACE; -+ magic_offset = ((void *)&header->magic - (void *)header); -+ header = (struct nvram_header *)buf; -+ } -+ -+ /* clear the existing magic # to mark the NVRAM as unusable -+ we can pull MAGIC bits low without erase */ -+ header->magic = NVRAM_CLEAR_MAGIC; /* All zeros magic */ -+ -+ /* Unlock sector blocks (for Intel 28F320C3B flash) , 20060309 */ -+ if(nvram_mtd->unlock) -+ nvram_mtd->unlock(nvram_mtd, offset, nvram_mtd->erasesize); -+ -+ ret = MTD_WRITE(nvram_mtd, offset + magic_offset, sizeof(header->magic), -+ &magic_len, (char *)&header->magic); -+ if (ret || magic_len != sizeof(header->magic)) { -+ printk("nvram_commit: clear MAGIC error\n"); -+ ret = -EIO; -+ goto done; -+ } -+ -+ header->magic = NVRAM_MAGIC; /* reset MAGIC before we regenerate the NVRAM, -+ otherwise we'll have an incorrect CRC */ -+ /* Regenerate NVRAM */ -+ spin_lock_irqsave(&nvram_lock, flags); -+ ret = _nvram_commit(header); -+ spin_unlock_irqrestore(&nvram_lock, flags); -+ if (ret) -+ goto done; -+ -+ /* Erase sector blocks */ -+ init_waitqueue_head(&wait_q); -+ for (; offset < nvram_mtd->size - NVRAM_SPACE + header->len; offset += nvram_mtd->erasesize) { -+ erase.mtd = nvram_mtd; -+ erase.addr = offset; -+ erase.len = nvram_mtd->erasesize; -+ erase.callback = erase_callback; -+ erase.priv = (u_long) &wait_q; -+ -+ set_current_state(TASK_INTERRUPTIBLE); -+ add_wait_queue(&wait_q, &wait); -+ -+ /* Unlock sector blocks */ -+ if (nvram_mtd->unlock) -+ nvram_mtd->unlock(nvram_mtd, offset, nvram_mtd->erasesize); -+ -+ if ((ret = MTD_ERASE(nvram_mtd, &erase))) { -+ set_current_state(TASK_RUNNING); -+ remove_wait_queue(&wait_q, &wait); -+ printk("nvram_commit: erase error\n"); -+ goto done; -+ } -+ -+ /* Wait for erase to finish */ -+ schedule(); -+ remove_wait_queue(&wait_q, &wait); -+ } -+ -+ /* Write partition up to end of data area */ -+ header->magic = NVRAM_INVALID_MAGIC; /* All ones magic */ -+ offset = nvram_mtd->size - erasesize; -+ i = erasesize - NVRAM_SPACE + header->len; -+ ret = MTD_WRITE(nvram_mtd, offset, i, &len, buf); -+ if (ret || len != i) { -+ printk("nvram_commit: write error\n"); -+ ret = -EIO; -+ goto done; -+ } -+ -+ /* Now mark the NVRAM in flash as "valid" by setting the correct -+ MAGIC # */ -+ header->magic = NVRAM_MAGIC; -+ ret = MTD_WRITE(nvram_mtd, offset + magic_offset, sizeof(header->magic), -+ &magic_len, (char *)&header->magic); -+ if (ret || magic_len != sizeof(header->magic)) { -+ printk("nvram_commit: write MAGIC error\n"); -+ ret = -EIO; -+ goto done; -+ } -+ -+ /* -+ * Reading a few bytes back here will put the device -+ * back to the correct mode on certain flashes */ -+ offset = nvram_mtd->size - erasesize; -+ ret = MTD_READ(nvram_mtd, offset, 4, &len, buf); -+ -+ done: -+ up(&nvram_sem); -+ kfree(buf); -+ -+ return ret; -+} -+ -+int -+nvram_getall(char *buf, int count) -+{ -+ unsigned long flags; -+ int ret; -+ -+ spin_lock_irqsave(&nvram_lock, flags); -+ if (nvram_major >= 0) -+ ret = _nvram_getall(buf, count); -+ else -+ ret = early_nvram_getall(buf, count); -+ spin_unlock_irqrestore(&nvram_lock, flags); -+ -+ return ret; -+} -+ -+ -+ -+ -+ -+ -+ -+/* User mode interface below */ -+ -+static ssize_t -+dev_nvram_read(struct file *file, char *buf, size_t count, loff_t *ppos) -+{ -+ char tmp[100], *name = tmp, *value; -+ ssize_t ret; -+ unsigned long off; -+ -+ if (count > sizeof(tmp)) { -+ if (!(name = kmalloc(count, GFP_KERNEL))) -+ return -ENOMEM; -+ } -+ -+ if (copy_from_user(name, buf, count)) { -+ ret = -EFAULT; -+ goto done; -+ } -+ -+ if (*name == '\0') { -+ /* Get all variables */ -+ ret = nvram_getall(name, count); -+ if (ret == 0) { -+ if (copy_to_user(buf, name, count)) { -+ ret = -EFAULT; -+ goto done; -+ } -+ ret = count; -+ } -+ } else { -+ if (!(value = nvram_get(name))) { -+ ret = 0; -+ goto done; -+ } -+ -+ /* Provide the offset into mmap() space */ -+ off = (unsigned long) value - (unsigned long) nvram_buf; -+ -+ if (put_user(off, (unsigned long *) buf)) { -+ ret = -EFAULT; -+ goto done; -+ } -+ -+ ret = sizeof(unsigned long); -+ } -+ -+ flush_cache_all(); -+ -+done: -+ if (name != tmp) -+ kfree(name); -+ -+ return ret; -+} -+ -+static ssize_t -+dev_nvram_write(struct file *file, const char *buf, size_t count, loff_t *ppos) -+{ -+ char tmp[100], *name = tmp, *value; -+ ssize_t ret; -+ -+ if (count > sizeof(tmp)) { -+ if (!(name = kmalloc(count, GFP_KERNEL))) -+ return -ENOMEM; -+ } -+ -+ if (copy_from_user(name, buf, count)) { -+ ret = -EFAULT; -+ goto done; -+ } -+ -+ value = name; -+ name = strsep(&value, "="); -+ if (value) -+ ret = nvram_set(name, value) ? : count; -+ else -+ ret = nvram_unset(name) ? : count; -+ -+ done: -+ if (name != tmp) -+ kfree(name); -+ -+ return ret; -+} -+ -+static int -+dev_nvram_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) -+{ -+ if (cmd != NVRAM_MAGIC) -+ return -EINVAL; -+ -+ return nvram_commit(); -+} -+ -+static int -+dev_nvram_mmap(struct file *file, struct vm_area_struct *vma) -+{ -+ unsigned long offset = virt_to_phys(nvram_buf); -+ -+ if (remap_page_range(vma->vm_start, offset, vma->vm_end-vma->vm_start, -+ vma->vm_page_prot)) -+ return -EAGAIN; -+ -+ return 0; -+} -+ -+static int -+dev_nvram_open(struct inode *inode, struct file * file) -+{ -+ MOD_INC_USE_COUNT; -+ return 0; -+} -+ -+static int -+dev_nvram_release(struct inode *inode, struct file * file) -+{ -+ MOD_DEC_USE_COUNT; -+ return 0; -+} -+ -+static struct file_operations dev_nvram_fops = { -+ owner: THIS_MODULE, -+ open: dev_nvram_open, -+ release: dev_nvram_release, -+ read: dev_nvram_read, -+ write: dev_nvram_write, -+ ioctl: dev_nvram_ioctl, -+ mmap: dev_nvram_mmap, -+}; -+ -+static void -+dev_nvram_exit(void) -+{ -+ int order = 0; -+ struct page *page, *end; -+ -+ if (nvram_handle) -+ devfs_unregister(nvram_handle); -+ -+ if (nvram_major >= 0) -+ devfs_unregister_chrdev(nvram_major, "nvram"); -+ -+ if (nvram_mtd) -+ put_mtd_device(nvram_mtd); -+ -+ while ((PAGE_SIZE << order) < NVRAM_SPACE) -+ order++; -+ end = virt_to_page(nvram_buf + (PAGE_SIZE << order) - 1); -+ for (page = virt_to_page(nvram_buf); page <= end; page++) -+ mem_map_unreserve(page); -+ -+ _nvram_exit(); -+} -+ -+static int __init -+dev_nvram_init(void) -+{ -+ int order = 0, ret = 0; -+ struct page *page, *end; -+ unsigned int i; -+ -+ /* Allocate and reserve memory to mmap() */ -+ while ((PAGE_SIZE << order) < NVRAM_SPACE) -+ order++; -+ end = virt_to_page(nvram_buf + (PAGE_SIZE << order) - 1); -+ for (page = virt_to_page(nvram_buf); page <= end; page++) -+ mem_map_reserve(page); -+ -+#ifdef CONFIG_MTD -+ /* Find associated MTD device */ -+ for (i = 0; i < MAX_MTD_DEVICES; i++) { -+ nvram_mtd = get_mtd_device(NULL, i); -+ if (nvram_mtd) { -+ if (!strcmp(nvram_mtd->name, "nvram") && -+ nvram_mtd->size >= NVRAM_SPACE) -+ break; -+ put_mtd_device(nvram_mtd); -+ } -+ } -+ if (i >= MAX_MTD_DEVICES) -+ nvram_mtd = NULL; -+#endif -+ -+ /* Initialize hash table lock */ -+ spin_lock_init(&nvram_lock); -+ -+ /* Initialize commit semaphore */ -+ init_MUTEX(&nvram_sem); -+ -+ /* Register char device */ -+ if ((nvram_major = devfs_register_chrdev(0, "nvram", &dev_nvram_fops)) < 0) { -+ ret = nvram_major; -+ goto err; -+ } -+ -+ /* Initialize hash table */ -+ _nvram_init(sbh); -+ -+ /* Create /dev/nvram handle */ -+ nvram_handle = devfs_register(NULL, "nvram", DEVFS_FL_NONE, nvram_major, 0, -+ S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP, &dev_nvram_fops, NULL); -+ -+ /* Set the SDRAM NCDL value into NVRAM if not already done */ -+ if (getintvar(NULL, "sdram_ncdl") == 0) { -+ unsigned int ncdl; -+ char buf[] = "0x00000000"; -+ -+ if ((ncdl = sb_memc_get_ncdl(sbh))) { -+ sprintf(buf, "0x%08x", ncdl); -+ nvram_set("sdram_ncdl", buf); -+ nvram_commit(); -+ } -+ } -+ -+ return 0; -+ -+ err: -+ dev_nvram_exit(); -+ return ret; -+} -+ -+module_init(dev_nvram_init); -+module_exit(dev_nvram_exit); -diff -urN linux.old/arch/mips/bcm947xx/pcibios.c linux.dev/arch/mips/bcm947xx/pcibios.c ---- linux.old/arch/mips/bcm947xx/pcibios.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/pcibios.c 2006-10-02 21:22:56.000000000 +0200 -@@ -0,0 +1,380 @@ -+/* -+ * Low-Level PCI and SB support for BCM47xx (Linux support code) -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: pcibios.c,v 1.1.1.9 2006/02/27 03:42:55 honor Exp $ -+ */ -+ -+#include <linux/config.h> -+#include <linux/types.h> -+#include <linux/kernel.h> -+#include <linux/sched.h> -+#include <linux/pci.h> -+#include <linux/init.h> -+#include <linux/delay.h> -+#include <asm/io.h> -+#include <asm/irq.h> -+#include <asm/paccess.h> -+ -+#include <typedefs.h> -+#include <osl.h> -+#include <bcmutils.h> -+#include <sbconfig.h> -+#include <sbutils.h> -+#include <hndpci.h> -+#include <pcicfg.h> -+#include <bcmdevs.h> -+#include <bcmnvram.h> -+ -+/* Global SB handle */ -+extern sb_t *bcm947xx_sbh; -+extern spinlock_t bcm947xx_sbh_lock; -+ -+/* Convenience */ -+#define sbh bcm947xx_sbh -+#define sbh_lock bcm947xx_sbh_lock -+ -+static int -+sbpci_read_config_byte(struct pci_dev *dev, int where, u8 *value) -+{ -+ unsigned long flags; -+ int ret; -+ -+ spin_lock_irqsave(&sbh_lock, flags); -+ ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), -+ PCI_FUNC(dev->devfn), where, value, sizeof(*value)); -+ spin_unlock_irqrestore(&sbh_lock, flags); -+ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -+} -+ -+static int -+sbpci_read_config_word(struct pci_dev *dev, int where, u16 *value) -+{ -+ unsigned long flags; -+ int ret; -+ -+ spin_lock_irqsave(&sbh_lock, flags); -+ ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), -+ PCI_FUNC(dev->devfn), where, value, sizeof(*value)); -+ spin_unlock_irqrestore(&sbh_lock, flags); -+ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -+} -+ -+static int -+sbpci_read_config_dword(struct pci_dev *dev, int where, u32 *value) -+{ -+ unsigned long flags; -+ int ret; -+ -+ spin_lock_irqsave(&sbh_lock, flags); -+ ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), -+ PCI_FUNC(dev->devfn), where, value, sizeof(*value)); -+ spin_unlock_irqrestore(&sbh_lock, flags); -+ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -+} -+ -+static int -+sbpci_write_config_byte(struct pci_dev *dev, int where, u8 value) -+{ -+ unsigned long flags; -+ int ret; -+ -+ spin_lock_irqsave(&sbh_lock, flags); -+ ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), -+ PCI_FUNC(dev->devfn), where, &value, sizeof(value)); -+ spin_unlock_irqrestore(&sbh_lock, flags); -+ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -+} -+ -+static int -+sbpci_write_config_word(struct pci_dev *dev, int where, u16 value) -+{ -+ unsigned long flags; -+ int ret; -+ -+ spin_lock_irqsave(&sbh_lock, flags); -+ ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), -+ PCI_FUNC(dev->devfn), where, &value, sizeof(value)); -+ spin_unlock_irqrestore(&sbh_lock, flags); -+ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -+} -+ -+static int -+sbpci_write_config_dword(struct pci_dev *dev, int where, u32 value) -+{ -+ unsigned long flags; -+ int ret; -+ -+ spin_lock_irqsave(&sbh_lock, flags); -+ ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), -+ PCI_FUNC(dev->devfn), where, &value, sizeof(value)); -+ spin_unlock_irqrestore(&sbh_lock, flags); -+ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -+} -+ -+static struct pci_ops pcibios_ops = { -+ sbpci_read_config_byte, -+ sbpci_read_config_word, -+ sbpci_read_config_dword, -+ sbpci_write_config_byte, -+ sbpci_write_config_word, -+ sbpci_write_config_dword -+}; -+ -+ -+void __init -+pcibios_init(void) -+{ -+ ulong flags; -+ -+ if (!(sbh = sb_kattach())) -+ panic("sb_kattach failed"); -+ spin_lock_init(&sbh_lock); -+ -+ spin_lock_irqsave(&sbh_lock, flags); -+ sbpci_init(sbh); -+ spin_unlock_irqrestore(&sbh_lock, flags); -+ -+ set_io_port_base((unsigned long) ioremap_nocache(SB_PCI_MEM, 0x04000000)); -+ -+ /* Scan the SB bus */ -+ pci_scan_bus(0, &pcibios_ops, NULL); -+ -+} -+ -+char * __init -+pcibios_setup(char *str) -+{ -+ if (!strncmp(str, "ban=", 4)) { -+ sbpci_ban(simple_strtoul(str + 4, NULL, 0)); -+ return NULL; -+ } -+ -+ return (str); -+} -+ -+static u32 pci_iobase = 0x100; -+static u32 pci_membase = SB_PCI_DMA; -+ -+void __init -+pcibios_fixup_bus(struct pci_bus *b) -+{ -+ struct list_head *ln; -+ struct pci_dev *d; -+ struct resource *res; -+ int pos, size; -+ u32 *base; -+ u8 irq; -+ -+ printk("PCI: Fixing up bus %d\n", b->number); -+ -+ /* Fix up SB */ -+ if (b->number == 0) { -+ for (ln = b->devices.next; ln != &b->devices; ln = ln->next) { -+ d = pci_dev_b(ln); -+ /* Fix up interrupt lines */ -+ pci_read_config_byte(d, PCI_INTERRUPT_LINE, &irq); -+ d->irq = irq + 2; -+ pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); -+ } -+ } -+ -+ /* Fix up external PCI */ -+ else { -+ for (ln = b->devices.next; ln != &b->devices; ln = ln->next) { -+ d = pci_dev_b(ln); -+ /* Fix up resource bases */ -+ for (pos = 0; pos < 6; pos++) { -+ res = &d->resource[pos]; -+ base = (res->flags & IORESOURCE_IO) ? &pci_iobase : &pci_membase; -+ if (res->end) { -+ size = res->end - res->start + 1; -+ if (*base & (size - 1)) -+ *base = (*base + size) & ~(size - 1); -+ res->start = *base; -+ res->end = res->start + size - 1; -+ *base += size; -+ pci_write_config_dword(d, -+ PCI_BASE_ADDRESS_0 + (pos << 2), res->start); -+ } -+ /* Fix up PCI bridge BAR0 only */ -+ if (b->number == 1 && PCI_SLOT(d->devfn) == 0) -+ break; -+ } -+ /* Fix up interrupt lines */ -+ if (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL)) -+ d->irq = (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL))->irq; -+ pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); -+ } -+ } -+} -+ -+unsigned int -+pcibios_assign_all_busses(void) -+{ -+ return 1; -+} -+ -+void -+pcibios_align_resource(void *data, struct resource *res, -+ unsigned long size, unsigned long align) -+{ -+} -+ -+int -+pcibios_enable_resources(struct pci_dev *dev) -+{ -+ u16 cmd, old_cmd; -+ int idx; -+ struct resource *r; -+ -+ /* External PCI only */ -+ if (dev->bus->number == 0) -+ return 0; -+ -+ pci_read_config_word(dev, PCI_COMMAND, &cmd); -+ old_cmd = cmd; -+ for (idx = 0; idx < 6; idx++) { -+ r = &dev->resource[idx]; -+ if (r->flags & IORESOURCE_IO) -+ cmd |= PCI_COMMAND_IO; -+ if (r->flags & IORESOURCE_MEM) -+ cmd |= PCI_COMMAND_MEMORY; -+ } -+ if (dev->resource[PCI_ROM_RESOURCE].start) -+ cmd |= PCI_COMMAND_MEMORY; -+ if (cmd != old_cmd) { -+ printk("PCI: Enabling device %s (%04x -> %04x)\n", dev->slot_name, old_cmd, cmd); -+ pci_write_config_word(dev, PCI_COMMAND, cmd); -+ } -+ return 0; -+} -+ -+int -+pcibios_enable_device(struct pci_dev *dev, int mask) -+{ -+ ulong flags; -+ uint coreidx; -+ void *regs; -+ -+ /* External PCI device enable */ -+ if (dev->bus->number != 0) -+ return pcibios_enable_resources(dev); -+ -+ /* These cores come out of reset enabled */ -+ if (dev->device == SB_MIPS || -+ dev->device == SB_MIPS33 || -+ dev->device == SB_EXTIF || -+ dev->device == SB_CC) -+ return 0; -+ -+ spin_lock_irqsave(&sbh_lock, flags); -+ coreidx = sb_coreidx(sbh); -+ regs = sb_setcoreidx(sbh, PCI_SLOT(dev->devfn)); -+ if (!regs) -+ return PCIBIOS_DEVICE_NOT_FOUND; -+ -+ /* -+ * The USB core requires a special bit to be set during core -+ * reset to enable host (OHCI) mode. Resetting the SB core in -+ * pcibios_enable_device() is a hack for compatibility with -+ * vanilla usb-ohci so that it does not have to know about -+ * SB. A driver that wants to use the USB core in device mode -+ * should know about SB and should reset the bit back to 0 -+ * after calling pcibios_enable_device(). -+ */ -+ if (sb_coreid(sbh) == SB_USB) { -+ sb_core_disable(sbh, sb_coreflags(sbh, 0, 0)); -+ sb_core_reset(sbh, 1 << 29, 0); -+ } -+ /* -+ * USB 2.0 special considerations: -+ * -+ * 1. Since the core supports both OHCI and EHCI functions, it must -+ * only be reset once. -+ * -+ * 2. In addition to the standard SB reset sequence, the Host Control -+ * Register must be programmed to bring the USB core and various -+ * phy components out of reset. -+ */ -+ else if (sb_coreid(sbh) == SB_USB20H) { -+ if (!sb_iscoreup(sbh)) { -+ sb_core_reset(sbh, 0, 0); -+ writel(0x7FF, (ulong)regs + 0x200); -+ udelay(1); -+ } -+ } else -+ sb_core_reset(sbh, 0, 0); -+ -+ sb_setcoreidx(sbh, coreidx); -+ spin_unlock_irqrestore(&sbh_lock, flags); -+ -+ return 0; -+} -+ -+void -+pcibios_update_resource(struct pci_dev *dev, struct resource *root, -+ struct resource *res, int resource) -+{ -+ unsigned long where, size; -+ u32 reg; -+ -+ /* External PCI only */ -+ if (dev->bus->number == 0) -+ return; -+ -+ where = PCI_BASE_ADDRESS_0 + (resource * 4); -+ size = res->end - res->start; -+ pci_read_config_dword(dev, where, ®); -+ reg = (reg & size) | (((u32)(res->start - root->start)) & ~size); -+ pci_write_config_dword(dev, where, reg); -+} -+ -+static void __init -+quirk_sbpci_bridge(struct pci_dev *dev) -+{ -+ if (dev->bus->number != 1 || PCI_SLOT(dev->devfn) != 0) -+ return; -+ -+ printk("PCI: Fixing up bridge\n"); -+ -+ /* Enable PCI bridge bus mastering and memory space */ -+ pci_set_master(dev); -+ pcibios_enable_resources(dev); -+ -+ /* Enable PCI bridge BAR1 prefetch and burst */ -+ pci_write_config_dword(dev, PCI_BAR1_CONTROL, 3); -+} -+ -+struct pci_fixup pcibios_fixups[] = { -+ { PCI_FIXUP_HEADER, PCI_ANY_ID, PCI_ANY_ID, quirk_sbpci_bridge }, -+ { 0 } -+}; -+ -+/* -+ * If we set up a device for bus mastering, we need to check the latency -+ * timer as certain crappy BIOSes forget to set it properly. -+ */ -+unsigned int pcibios_max_latency = 255; -+ -+void pcibios_set_master(struct pci_dev *dev) -+{ -+ u8 lat; -+ pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); -+ if (lat < 16) -+ lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; -+ else if (lat > pcibios_max_latency) -+ lat = pcibios_max_latency; -+ else -+ return; -+ printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", dev->slot_name, lat); -+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); -+} -+ -diff -urN linux.old/arch/mips/bcm947xx/prom.c linux.dev/arch/mips/bcm947xx/prom.c ---- linux.old/arch/mips/bcm947xx/prom.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/prom.c 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,41 @@ -+/* -+ * Early initialization code for BCM94710 boards -+ * -+ * Copyright 2004, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: prom.c,v 1.1 2005/03/16 13:49:59 wbx Exp $ -+ */ -+ -+#include <linux/config.h> -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/types.h> -+#include <asm/bootinfo.h> -+ -+void __init -+prom_init(int argc, const char **argv) -+{ -+ unsigned long mem; -+ -+ mips_machgroup = MACH_GROUP_BRCM; -+ mips_machtype = MACH_BCM947XX; -+ -+ /* Figure out memory size by finding aliases */ -+ for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) { -+ if (*(unsigned long *)((unsigned long)(prom_init) + mem) == -+ *(unsigned long *)(prom_init)) -+ break; -+ } -+ add_memory_region(0, mem, BOOT_MEM_RAM); -+} -+ -+void __init -+prom_free_prom_memory(void) -+{ -+} -diff -urN linux.old/arch/mips/bcm947xx/sbmips.c linux.dev/arch/mips/bcm947xx/sbmips.c ---- linux.old/arch/mips/bcm947xx/sbmips.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/sbmips.c 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,1132 @@ -+/* -+ * BCM47XX Sonics SiliconBackplane MIPS core routines -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: hndmips.c,v 1.1.1.1 2006/02/27 03:43:16 honor Exp $ -+ */ -+ -+#include <typedefs.h> -+#include <bcmdefs.h> -+#include <osl.h> -+#include <bcmutils.h> -+#include <sbutils.h> -+#include <bcmdevs.h> -+#include <bcmnvram.h> -+#include <sbconfig.h> -+#include <sbextif.h> -+#include <sbchipc.h> -+#include <sbmemc.h> -+#include <mipsinc.h> -+#include <sbhndmips.h> -+#include <hndcpu.h> -+ -+/* sbipsflag register format, indexed by irq. */ -+static const uint32 sbips_int_mask[] = { -+ 0, /* placeholder */ -+ SBIPS_INT1_MASK, -+ SBIPS_INT2_MASK, -+ SBIPS_INT3_MASK, -+ SBIPS_INT4_MASK -+}; -+ -+static const uint32 sbips_int_shift[] = { -+ 0, /* placeholder */ -+ SBIPS_INT1_SHIFT, -+ SBIPS_INT2_SHIFT, -+ SBIPS_INT3_SHIFT, -+ SBIPS_INT4_SHIFT -+}; -+ -+/* -+ * Map SB cores sharing the MIPS hardware IRQ0 to virtual dedicated OS IRQs. -+ * Per-port BSP code is required to provide necessary translations between -+ * the shared MIPS IRQ and the virtual OS IRQs based on SB core flag. -+ * -+ * See sb_irq() for the mapping. -+ */ -+static uint shirq_map_base = 0; -+ -+/* Returns the SB interrupt flag of the current core. */ -+static uint32 -+sb_getflag(sb_t *sbh) -+{ -+ osl_t *osh; -+ void *regs; -+ sbconfig_t *sb; -+ -+ osh = sb_osh(sbh); -+ regs = sb_coreregs(sbh); -+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); -+ -+ return (R_REG(osh, &sb->sbtpsflag) & SBTPS_NUM0_MASK); -+} -+ -+/* -+ * Returns the MIPS IRQ assignment of the current core. If unassigned, -+ * 0 is returned. -+ */ -+uint -+sb_irq(sb_t *sbh) -+{ -+ osl_t *osh; -+ uint idx; -+ void *regs; -+ sbconfig_t *sb; -+ uint32 flag, sbipsflag; -+ uint irq = 0; -+ -+ osh = sb_osh(sbh); -+ flag = sb_getflag(sbh); -+ -+ idx = sb_coreidx(sbh); -+ -+ if ((regs = sb_setcore(sbh, SB_MIPS, 0)) || -+ (regs = sb_setcore(sbh, SB_MIPS33, 0))) { -+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); -+ -+ /* sbipsflag specifies which core is routed to interrupts 1 to 4 */ -+ sbipsflag = R_REG(osh, &sb->sbipsflag); -+ for (irq = 1; irq <= 4; irq++) { -+ if (((sbipsflag & sbips_int_mask[irq]) >> sbips_int_shift[irq]) == flag) -+ break; -+ } -+ if (irq == 5) -+ irq = 0; -+ } -+ -+ sb_setcoreidx(sbh, idx); -+ -+ return irq; -+} -+ -+/* Clears the specified MIPS IRQ. */ -+static void -+BCMINITFN(sb_clearirq)(sb_t *sbh, uint irq) -+{ -+ osl_t *osh; -+ void *regs; -+ sbconfig_t *sb; -+ -+ osh = sb_osh(sbh); -+ -+ if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) && -+ !(regs = sb_setcore(sbh, SB_MIPS33, 0))) -+ ASSERT(regs); -+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); -+ -+ if (irq == 0) -+ W_REG(osh, &sb->sbintvec, 0); -+ else -+ OR_REG(osh, &sb->sbipsflag, sbips_int_mask[irq]); -+} -+ -+/* -+ * Assigns the specified MIPS IRQ to the specified core. Shared MIPS -+ * IRQ 0 may be assigned more than once. -+ * -+ * The old assignment to the specified core is removed first. -+ */ -+static void -+BCMINITFN(sb_setirq)(sb_t *sbh, uint irq, uint coreid, uint coreunit) -+{ -+ osl_t *osh; -+ void *regs; -+ sbconfig_t *sb; -+ uint32 flag; -+ uint oldirq; -+ -+ osh = sb_osh(sbh); -+ -+ regs = sb_setcore(sbh, coreid, coreunit); -+ ASSERT(regs); -+ flag = sb_getflag(sbh); -+ oldirq = sb_irq(sbh); -+ if (oldirq) -+ sb_clearirq(sbh, oldirq); -+ -+ if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) && -+ !(regs = sb_setcore(sbh, SB_MIPS33, 0))) -+ ASSERT(regs); -+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); -+ -+ if (!oldirq) -+ AND_REG(osh, &sb->sbintvec, ~(1 << flag)); -+ -+ if (irq == 0) -+ OR_REG(osh, &sb->sbintvec, 1 << flag); -+ else { -+ flag <<= sbips_int_shift[irq]; -+ ASSERT(!(flag & ~sbips_int_mask[irq])); -+ flag |= R_REG(osh, &sb->sbipsflag) & ~sbips_int_mask[irq]; -+ W_REG(osh, &sb->sbipsflag, flag); -+ } -+} -+ -+/* -+ * Initializes clocks and interrupts. SB and NVRAM access must be -+ * initialized prior to calling. -+ * -+ * 'shirqmap' enables virtual dedicated OS IRQ mapping if non-zero. -+ */ -+void -+BCMINITFN(sb_mips_init)(sb_t *sbh, uint shirqmap) -+{ -+ osl_t *osh; -+ ulong hz, ns, tmp; -+ extifregs_t *eir; -+ chipcregs_t *cc; -+ char *value; -+ uint irq; -+ -+ osh = sb_osh(sbh); -+ -+ /* Figure out current SB clock speed */ -+ if ((hz = sb_clock(sbh)) == 0) -+ hz = 100000000; -+ ns = 1000000000 / hz; -+ -+ /* Setup external interface timing */ -+ if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) { -+ /* Initialize extif so we can get to the LEDs and external UART */ -+ W_REG(osh, &eir->prog_config, CF_EN); -+ -+ /* Set timing for the flash */ -+ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ -+ tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */ -+ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */ -+ W_REG(osh, &eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */ -+ -+ /* Set programmable interface timing for external uart */ -+ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ -+ tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */ -+ tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */ -+ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */ -+ W_REG(osh, &eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */ -+ } else if ((cc = sb_setcore(sbh, SB_CC, 0))) { -+ /* Set timing for the flash */ -+ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ -+ tmp |= CEIL(10, ns) << FW_W1_SHIFT; /* W1 = 10nS */ -+ tmp |= CEIL(120, ns); /* W0 = 120nS */ -+ if ((sb_corerev(sbh) < 9) || -+ (BCMINIT(sb_chip)(sbh) == 0x5365)) -+ W_REG(osh, &cc->flash_waitcount, tmp); -+ -+ if ((sb_corerev(sbh) < 9) || -+ ((sb_chip(sbh) == BCM5350_CHIP_ID) && sb_chiprev(sbh) == 0) || -+ (BCMINIT(sb_chip)(sbh) == 0x5365)) { -+ W_REG(osh, &cc->pcmcia_memwait, tmp); -+ } -+ -+ /* Save shared IRQ mapping base */ -+ shirq_map_base = shirqmap; -+ } -+ -+ /* Chip specific initialization */ -+ switch (sb_chip(sbh)) { -+ case BCM4710_CHIP_ID: -+ /* Clear interrupt map */ -+ for (irq = 0; irq <= 4; irq++) -+ sb_clearirq(sbh, irq); -+ sb_setirq(sbh, 0, SB_CODEC, 0); -+ sb_setirq(sbh, 0, SB_EXTIF, 0); -+ sb_setirq(sbh, 2, SB_ENET, 1); -+ sb_setirq(sbh, 3, SB_ILINE20, 0); -+ sb_setirq(sbh, 4, SB_PCI, 0); -+ ASSERT(eir); -+ value = nvram_get("et0phyaddr"); -+ if (value && !strcmp(value, "31")) { -+ /* Enable internal UART */ -+ W_REG(osh, &eir->corecontrol, CC_UE); -+ /* Give USB its own interrupt */ -+ sb_setirq(sbh, 1, SB_USB, 0); -+ } else { -+ /* Disable internal UART */ -+ W_REG(osh, &eir->corecontrol, 0); -+ /* Give Ethernet its own interrupt */ -+ sb_setirq(sbh, 1, SB_ENET, 0); -+ sb_setirq(sbh, 0, SB_USB, 0); -+ } -+ break; -+ case BCM5350_CHIP_ID: -+ /* Clear interrupt map */ -+ for (irq = 0; irq <= 4; irq++) -+ sb_clearirq(sbh, irq); -+ sb_setirq(sbh, 0, SB_CC, 0); -+ sb_setirq(sbh, 0, SB_MIPS33, 0); -+ sb_setirq(sbh, 1, SB_D11, 0); -+ sb_setirq(sbh, 2, SB_ENET, 0); -+ sb_setirq(sbh, 3, SB_PCI, 0); -+ sb_setirq(sbh, 4, SB_USB, 0); -+ break; -+ case BCM4785_CHIP_ID: -+ /* Reassign PCI to irq 4 */ -+ sb_setirq(sbh, 4, SB_PCI, 0); -+ break; -+ } -+} -+ -+uint32 -+BCMINITFN(sb_cpu_clock)(sb_t *sbh) -+{ -+ extifregs_t *eir; -+ chipcregs_t *cc; -+ uint32 n, m; -+ uint idx; -+ uint32 pll_type, rate = 0; -+ -+ /* get index of the current core */ -+ idx = sb_coreidx(sbh); -+ pll_type = PLL_TYPE1; -+ -+ /* switch to extif or chipc core */ -+ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { -+ n = R_REG(osh, &eir->clockcontrol_n); -+ m = R_REG(osh, &eir->clockcontrol_sb); -+ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { -+ pll_type = R_REG(osh, &cc->capabilities) & CAP_PLL_MASK; -+ n = R_REG(osh, &cc->clockcontrol_n); -+ if ((pll_type == PLL_TYPE2) || -+ (pll_type == PLL_TYPE4) || -+ (pll_type == PLL_TYPE6) || -+ (pll_type == PLL_TYPE7)) -+ m = R_REG(osh, &cc->clockcontrol_m3); -+ else if (pll_type == PLL_TYPE5) { -+ rate = 200000000; -+ goto out; -+ } -+ else if (pll_type == PLL_TYPE3) { -+ if (sb_chip(sbh) == BCM5365_CHIP_ID) { -+ rate = 200000000; -+ goto out; -+ } -+ /* 5350 uses m2 to control mips */ -+ else -+ m = R_REG(osh, &cc->clockcontrol_m2); -+ } else -+ m = R_REG(osh, &cc->clockcontrol_sb); -+ } else -+ goto out; -+ -+ -+ /* calculate rate */ -+ if (BCMINIT(sb_chip)(sbh) == 0x5365) -+ rate = 100000000; -+ else -+ rate = sb_clock_rate(pll_type, n, m); -+ -+ if (pll_type == PLL_TYPE6) -+ rate = SB2MIPS_T6(rate); -+ -+out: -+ /* switch back to previous core */ -+ sb_setcoreidx(sbh, idx); -+ -+ return rate; -+} -+ -+#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4) -+ -+static void -+BCMINITFN(handler)(void) -+{ -+ __asm__( -+ ".set\tmips32\n\t" -+ "ssnop\n\t" -+ "ssnop\n\t" -+ /* Disable interrupts */ -+ /* MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~(ALLINTS | STO_IE)); */ -+ "mfc0 $15, $12\n\t" -+ /* Just a Hack to not to use reg 'at' which was causing problems on 4704 A2 */ -+ "li $14, -31746\n\t" -+ "and $15, $15, $14\n\t" -+ "mtc0 $15, $12\n\t" -+ "eret\n\t" -+ "nop\n\t" -+ "nop\n\t" -+ ".set\tmips0"); -+} -+ -+/* The following MUST come right after handler() */ -+static void -+BCMINITFN(afterhandler)(void) -+{ -+} -+ -+/* -+ * Set the MIPS, backplane and PCI clocks as closely as possible. -+ * -+ * MIPS clocks synchronization function has been moved from PLL in chipcommon -+ * core rev. 15 to a DLL inside the MIPS core in 4785. -+ */ -+bool -+BCMINITFN(sb_mips_setclock)(sb_t *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock) -+{ -+ extifregs_t *eir = NULL; -+ chipcregs_t *cc = NULL; -+ mipsregs_t *mipsr = NULL; -+ volatile uint32 *clockcontrol_n, *clockcontrol_sb, *clockcontrol_pci, *clockcontrol_m2; -+ uint32 orig_n, orig_sb, orig_pci, orig_m2, orig_mips, orig_ratio_parm, orig_ratio_cfg; -+ uint32 pll_type, sync_mode; -+ uint ic_size, ic_lsize; -+ uint idx, i; -+ -+ /* PLL configuration: type 1 */ -+ typedef struct { -+ uint32 mipsclock; -+ uint16 n; -+ uint32 sb; -+ uint32 pci33; -+ uint32 pci25; -+ } n3m_table_t; -+ static n3m_table_t BCMINITDATA(type1_table)[] = { -+ /* 96.000 32.000 24.000 */ -+ { 96000000, 0x0303, 0x04020011, 0x11030011, 0x11050011 }, -+ /* 100.000 33.333 25.000 */ -+ { 100000000, 0x0009, 0x04020011, 0x11030011, 0x11050011 }, -+ /* 104.000 31.200 24.960 */ -+ { 104000000, 0x0802, 0x04020011, 0x11050009, 0x11090009 }, -+ /* 108.000 32.400 24.923 */ -+ { 108000000, 0x0403, 0x04020011, 0x11050009, 0x02000802 }, -+ /* 112.000 32.000 24.889 */ -+ { 112000000, 0x0205, 0x04020011, 0x11030021, 0x02000403 }, -+ /* 115.200 32.000 24.000 */ -+ { 115200000, 0x0303, 0x04020009, 0x11030011, 0x11050011 }, -+ /* 120.000 30.000 24.000 */ -+ { 120000000, 0x0011, 0x04020011, 0x11050011, 0x11090011 }, -+ /* 124.800 31.200 24.960 */ -+ { 124800000, 0x0802, 0x04020009, 0x11050009, 0x11090009 }, -+ /* 128.000 32.000 24.000 */ -+ { 128000000, 0x0305, 0x04020011, 0x11050011, 0x02000305 }, -+ /* 132.000 33.000 24.750 */ -+ { 132000000, 0x0603, 0x04020011, 0x11050011, 0x02000305 }, -+ /* 136.000 32.640 24.727 */ -+ { 136000000, 0x0c02, 0x04020011, 0x11090009, 0x02000603 }, -+ /* 140.000 30.000 24.706 */ -+ { 140000000, 0x0021, 0x04020011, 0x11050021, 0x02000c02 }, -+ /* 144.000 30.857 24.686 */ -+ { 144000000, 0x0405, 0x04020011, 0x01020202, 0x11090021 }, -+ /* 150.857 33.000 24.000 */ -+ { 150857142, 0x0605, 0x04020021, 0x02000305, 0x02000605 }, -+ /* 152.000 32.571 24.000 */ -+ { 152000000, 0x0e02, 0x04020011, 0x11050021, 0x02000e02 }, -+ /* 156.000 31.200 24.960 */ -+ { 156000000, 0x0802, 0x04020005, 0x11050009, 0x11090009 }, -+ /* 160.000 32.000 24.000 */ -+ { 160000000, 0x0309, 0x04020011, 0x11090011, 0x02000309 }, -+ /* 163.200 32.640 24.727 */ -+ { 163200000, 0x0c02, 0x04020009, 0x11090009, 0x02000603 }, -+ /* 168.000 32.000 24.889 */ -+ { 168000000, 0x0205, 0x04020005, 0x11030021, 0x02000403 }, -+ /* 176.000 33.000 24.000 */ -+ { 176000000, 0x0602, 0x04020003, 0x11050005, 0x02000602 }, -+ }; -+ -+ /* PLL configuration: type 3 */ -+ typedef struct { -+ uint32 mipsclock; -+ uint16 n; -+ uint32 m2; /* that is the clockcontrol_m2 */ -+ } type3_table_t; -+ static type3_table_t type3_table[] = { -+ /* for 5350, mips clock is always double sb clock */ -+ { 150000000, 0x311, 0x4020005 }, -+ { 200000000, 0x311, 0x4020003 }, -+ }; -+ -+ /* PLL configuration: type 2, 4, 7 */ -+ typedef struct { -+ uint32 mipsclock; -+ uint32 sbclock; -+ uint16 n; -+ uint32 sb; -+ uint32 pci33; -+ uint32 m2; -+ uint32 m3; -+ uint32 ratio_cfg; -+ uint32 ratio_parm; -+ uint32 d11_r1; -+ uint32 d11_r2; -+ } n4m_table_t; -+ static n4m_table_t BCMINITDATA(type2_table)[] = { -+ { 120000000, 60000000, 0x0303, 0x01000200, 0x01000600, 0x01000200, 0x05000200, 11, -+ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, -+ { 150000000, 75000000, 0x0303, 0x01000100, 0x01000600, 0x01000100, 0x05000100, 11, -+ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, -+ { 180000000, 80000000, 0x0403, 0x01010000, 0x01020300, 0x01020600, 0x05000100, 8, -+ 0x012a00a9, 9 /* ratio 4/9 */, 0x012a00a9 }, -+ { 180000000, 90000000, 0x0403, 0x01000100, 0x01020300, 0x01000100, 0x05000100, 11, -+ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, -+ { 200000000, 100000000, 0x0303, 0x02010000, 0x02040001, 0x02010000, 0x06000001, 11, -+ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, -+ { 211200000, 105600000, 0x0902, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 11, -+ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, -+ { 220800000, 110400000, 0x1500, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 11, -+ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, -+ { 230400000, 115200000, 0x0604, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 11, -+ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, -+ { 234000000, 104000000, 0x0b01, 0x01010000, 0x01010700, 0x01020600, 0x05000100, 8, -+ 0x012a00a9, 9 /* ratio 4/9 */, 0x012a00a9 }, -+ { 240000000, 120000000, 0x0803, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 11, -+ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, -+ { 252000000, 126000000, 0x0504, 0x01000100, 0x01020500, 0x01000100, 0x05000100, 11, -+ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, -+ { 264000000, 132000000, 0x0903, 0x01000200, 0x01020700, 0x01000200, 0x05000200, 11, -+ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, -+ { 270000000, 120000000, 0x0703, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8, -+ 0x012a00a9, 9 /* ratio 4/9 */, 0x012a00a9 }, -+ { 276000000, 122666666, 0x1500, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8, -+ 0x012a00a9, 9 /* ratio 4/9 */, 0x012a00a9 }, -+ { 280000000, 140000000, 0x0503, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 11, -+ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, -+ { 288000000, 128000000, 0x0604, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8, -+ 0x012a00a9, 9 /* ratio 4/9 */, 0x012a00a9 }, -+ { 288000000, 144000000, 0x0404, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 11, -+ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, -+ { 300000000, 133333333, 0x0803, 0x01010000, 0x01020600, 0x01010100, 0x05000100, 8, -+ 0x012a00a9, 9 /* ratio 4/9 */, 0x012a00a9 }, -+ { 300000000, 150000000, 0x0803, 0x01000100, 0x01020600, 0x01010100, 0x05000100, 11, -+ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, -+ { 330000000, 132000000, 0x0903, 0x01000200, 0x00020200, 0x01010100, 0x05000100, 0, -+ 0, 10 /* ratio 4/10 */, 0x02520129 }, -+ { 330000000, 146666666, 0x0903, 0x01010000, 0x00020200, 0x01010100, 0x05000100, 0, -+ 0, 9 /* ratio 4/9 */, 0x012a00a9 }, -+ { 330000000, 165000000, 0x0903, 0x01000100, 0x00020200, 0x01010100, 0x05000100, 0, -+ 0, 8 /* ratio 4/8 */, 0x00aa0055 }, -+ { 360000000, 120000000, 0x0a03, 0x01000300, 0x00010201, 0x01010200, 0x05000100, 0, -+ 0, 12 /* ratio 4/12 */, 0x04920492 }, -+ { 360000000, 144000000, 0x0a03, 0x01000200, 0x00010201, 0x01010200, 0x05000100, 0, -+ 0, 10 /* ratio 4/10 */, 0x02520129 }, -+ { 360000000, 160000000, 0x0a03, 0x01010000, 0x00010201, 0x01010200, 0x05000100, 0, -+ 0, 9 /* ratio 4/9 */, 0x012a00a9 }, -+ { 360000000, 180000000, 0x0a03, 0x01000100, 0x00010201, 0x01010200, 0x05000100, 0, -+ 0, 8 /* ratio 4/8 */, 0x00aa0055 }, -+ { 390000000, 130000000, 0x0b03, 0x01010100, 0x00020101, 0x01020100, 0x05000100, 0, -+ 0, 12 /* ratio 4/12 */, 0x04920492 }, -+ { 390000000, 156000000, 0x0b03, 0x01000200, 0x00020101, 0x01020100, 0x05000100, 0, -+ 0, 10 /* ratio 4/10 */, 0x02520129 }, -+ { 390000000, 173000000, 0x0b03, 0x01010000, 0x00020101, 0x01020100, 0x05000100, 0, -+ 0, 9 /* ratio 4/9 */, 0x012a00a9 }, -+ { 390000000, 195000000, 0x0b03, 0x01000100, 0x00020101, 0x01020100, 0x05000100, 0, -+ 0, 8 /* ratio 4/8 */, 0x00aa0055 }, -+ }; -+ static n4m_table_t BCMINITDATA(type4_table)[] = { -+ { 120000000, 60000000, 0x0009, 0x11020009, 0x01030203, 0x11020009, 0x04000009, 11, -+ 0x0aaa0555 }, -+ { 150000000, 75000000, 0x0009, 0x11050002, 0x01030203, 0x11050002, 0x04000005, 11, -+ 0x0aaa0555 }, -+ { 192000000, 96000000, 0x0702, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, -+ 0x0aaa0555 }, -+ { 198000000, 99000000, 0x0603, 0x11020005, 0x11030011, 0x11020005, 0x04000005, 11, -+ 0x0aaa0555 }, -+ { 200000000, 100000000, 0x0009, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 11, -+ 0x0aaa0555 }, -+ { 204000000, 102000000, 0x0c02, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, -+ 0x0aaa0555 }, -+ { 208000000, 104000000, 0x0802, 0x11030002, 0x11090005, 0x11030002, 0x04000003, 11, -+ 0x0aaa0555 }, -+ { 210000000, 105000000, 0x0209, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, -+ 0x0aaa0555 }, -+ { 216000000, 108000000, 0x0111, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, -+ 0x0aaa0555 }, -+ { 224000000, 112000000, 0x0205, 0x11030002, 0x02002103, 0x11030002, 0x04000003, 11, -+ 0x0aaa0555 }, -+ { 228000000, 101333333, 0x0e02, 0x11030003, 0x11210005, 0x01030305, 0x04000005, 8, -+ 0x012a00a9 }, -+ { 228000000, 114000000, 0x0e02, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 11, -+ 0x0aaa0555 }, -+ { 240000000, 102857143, 0x0109, 0x04000021, 0x01050203, 0x11030021, 0x04000003, 13, -+ 0x254a14a9 }, -+ { 240000000, 120000000, 0x0109, 0x11030002, 0x01050203, 0x11030002, 0x04000003, 11, -+ 0x0aaa0555 }, -+ { 252000000, 100800000, 0x0203, 0x04000009, 0x11050005, 0x02000209, 0x04000002, 9, -+ 0x02520129 }, -+ { 252000000, 126000000, 0x0203, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 11, -+ 0x0aaa0555 }, -+ { 264000000, 132000000, 0x0602, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 11, -+ 0x0aaa0555 }, -+ { 272000000, 116571428, 0x0c02, 0x04000021, 0x02000909, 0x02000221, 0x04000003, 13, -+ 0x254a14a9 }, -+ { 280000000, 120000000, 0x0209, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 13, -+ 0x254a14a9 }, -+ { 288000000, 123428571, 0x0111, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 13, -+ 0x254a14a9 }, -+ { 300000000, 120000000, 0x0009, 0x04000009, 0x01030203, 0x02000902, 0x04000002, 9, -+ 0x02520129 }, -+ { 300000000, 150000000, 0x0009, 0x04000005, 0x01030203, 0x04000005, 0x04000002, 11, -+ 0x0aaa0555 } -+ }; -+ static n4m_table_t BCMINITDATA(type7_table)[] = { -+ { 183333333, 91666666, 0x0605, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, -+ 0x0aaa0555 }, -+ { 187500000, 93750000, 0x0a03, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, -+ 0x0aaa0555 }, -+ { 196875000, 98437500, 0x1003, 0x11020005, 0x11050011, 0x11020005, 0x04000005, 11, -+ 0x0aaa0555 }, -+ { 200000000, 100000000, 0x0311, 0x04000011, 0x11030011, 0x04000009, 0x04000003, 11, -+ 0x0aaa0555 }, -+ { 200000000, 100000000, 0x0311, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 11, -+ 0x0aaa0555 }, -+ { 206250000, 103125000, 0x1103, 0x11020005, 0x11050011, 0x11020005, 0x04000005, 11, -+ 0x0aaa0555 }, -+ { 212500000, 106250000, 0x0c05, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, -+ 0x0aaa0555 }, -+ { 215625000, 107812500, 0x1203, 0x11090009, 0x11050005, 0x11020005, 0x04000005, 11, -+ 0x0aaa0555 }, -+ { 216666666, 108333333, 0x0805, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, -+ 0x0aaa0555 }, -+ { 225000000, 112500000, 0x0d03, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, -+ 0x0aaa0555 }, -+ { 233333333, 116666666, 0x0905, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, -+ 0x0aaa0555 }, -+ { 237500000, 118750000, 0x0e05, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 11, -+ 0x0aaa0555 }, -+ { 240000000, 120000000, 0x0b11, 0x11020009, 0x11210009, 0x11020009, 0x04000009, 11, -+ 0x0aaa0555 }, -+ { 250000000, 125000000, 0x0f03, 0x11020003, 0x11210003, 0x11020003, 0x04000003, 11, -+ 0x0aaa0555 } -+ }; -+ -+ ulong start, end, dst; -+ bool ret = FALSE; -+ -+ volatile uint32 *dll_ctrl = (volatile uint32 *)0xff400008; -+ volatile uint32 *dll_r1 = (volatile uint32 *)0xff400010; -+ volatile uint32 *dll_r2 = (volatile uint32 *)0xff400018; -+ -+ /* get index of the current core */ -+ idx = sb_coreidx(sbh); -+ clockcontrol_m2 = NULL; -+ -+ /* switch to extif or chipc core */ -+ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { -+ pll_type = PLL_TYPE1; -+ clockcontrol_n = &eir->clockcontrol_n; -+ clockcontrol_sb = &eir->clockcontrol_sb; -+ clockcontrol_pci = &eir->clockcontrol_pci; -+ clockcontrol_m2 = &cc->clockcontrol_m2; -+ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { -+ pll_type = R_REG(osh, &cc->capabilities) & CAP_PLL_MASK; -+ if (pll_type == PLL_TYPE6) { -+ clockcontrol_n = NULL; -+ clockcontrol_sb = NULL; -+ clockcontrol_pci = NULL; -+ } else { -+ clockcontrol_n = &cc->clockcontrol_n; -+ clockcontrol_sb = &cc->clockcontrol_sb; -+ clockcontrol_pci = &cc->clockcontrol_pci; -+ clockcontrol_m2 = &cc->clockcontrol_m2; -+ } -+ } else -+ goto done; -+ -+ if (pll_type == PLL_TYPE6) { -+ /* Silence compilers */ -+ orig_n = orig_sb = orig_pci = 0; -+ } else { -+ /* Store the current clock register values */ -+ orig_n = R_REG(osh, clockcontrol_n); -+ orig_sb = R_REG(osh, clockcontrol_sb); -+ orig_pci = R_REG(osh, clockcontrol_pci); -+ } -+ -+ if (pll_type == PLL_TYPE1) { -+ /* Keep the current PCI clock if not specified */ -+ if (pciclock == 0) { -+ pciclock = sb_clock_rate(pll_type, R_REG(osh, clockcontrol_n), -+ R_REG(osh, clockcontrol_pci)); -+ pciclock = (pciclock <= 25000000) ? 25000000 : 33000000; -+ } -+ -+ /* Search for the closest MIPS clock less than or equal to a preferred value */ -+ for (i = 0; i < ARRAYSIZE(type1_table); i++) { -+ ASSERT(type1_table[i].mipsclock == -+ sb_clock_rate(pll_type, type1_table[i].n, -+ type1_table[i].sb)); -+ if (type1_table[i].mipsclock > mipsclock) -+ break; -+ } -+ if (i == 0) { -+ ret = FALSE; -+ goto done; -+ } else { -+ ret = TRUE; -+ i--; -+ } -+ ASSERT(type1_table[i].mipsclock <= mipsclock); -+ -+ /* No PLL change */ -+ if ((orig_n == type1_table[i].n) && -+ (orig_sb == type1_table[i].sb) && -+ (orig_pci == type1_table[i].pci33)) -+ goto done; -+ -+ /* Set the PLL controls */ -+ W_REG(osh, clockcontrol_n, type1_table[i].n); -+ W_REG(osh, clockcontrol_sb, type1_table[i].sb); -+ if (pciclock == 25000000) -+ W_REG(osh, clockcontrol_pci, type1_table[i].pci25); -+ else -+ W_REG(osh, clockcontrol_pci, type1_table[i].pci33); -+ -+ /* Reset */ -+ sb_watchdog(sbh, 1); -+ while (1); -+ } else if (pll_type == PLL_TYPE3) { -+ /* 5350 */ -+ if (sb_chip(sbh) != BCM5365_CHIP_ID) { -+ /* -+ * Search for the closest MIPS clock less than or equal to -+ * a preferred value. -+ */ -+ for (i = 0; i < ARRAYSIZE(type3_table); i++) { -+ if (type3_table[i].mipsclock > mipsclock) -+ break; -+ } -+ if (i == 0) { -+ ret = FALSE; -+ goto done; -+ } else { -+ ret = TRUE; -+ i--; -+ } -+ ASSERT(type3_table[i].mipsclock <= mipsclock); -+ -+ /* No PLL change */ -+ orig_m2 = R_REG(osh, &cc->clockcontrol_m2); -+ if ((orig_n == type3_table[i].n) && -+ (orig_m2 == type3_table[i].m2)) { -+ goto done; -+ } -+ -+ /* Set the PLL controls */ -+ W_REG(osh, clockcontrol_n, type3_table[i].n); -+ W_REG(osh, clockcontrol_m2, type3_table[i].m2); -+ -+ /* Reset */ -+ sb_watchdog(sbh, 1); -+ while (1); -+ } -+ } else if ((pll_type == PLL_TYPE2) || -+ (pll_type == PLL_TYPE4) || -+ (pll_type == PLL_TYPE6) || -+ (pll_type == PLL_TYPE7)) { -+ n4m_table_t *table = NULL, *te; -+ uint tabsz = 0; -+ -+ ASSERT(cc); -+ -+ orig_mips = R_REG(osh, &cc->clockcontrol_m3); -+ -+ switch (pll_type) { -+ case PLL_TYPE6: { -+ uint32 new_mips = 0; -+ -+ ret = TRUE; -+ if (mipsclock <= SB2MIPS_T6(CC_T6_M1)) -+ new_mips = CC_T6_MMASK; -+ -+ if (orig_mips == new_mips) -+ goto done; -+ -+ W_REG(osh, &cc->clockcontrol_m3, new_mips); -+ goto end_fill; -+ } -+ case PLL_TYPE2: -+ table = type2_table; -+ tabsz = ARRAYSIZE(type2_table); -+ break; -+ case PLL_TYPE4: -+ table = type4_table; -+ tabsz = ARRAYSIZE(type4_table); -+ break; -+ case PLL_TYPE7: -+ table = type7_table; -+ tabsz = ARRAYSIZE(type7_table); -+ break; -+ default: -+ ASSERT("No table for plltype" == NULL); -+ break; -+ } -+ -+ /* Store the current clock register values */ -+ orig_m2 = R_REG(osh, &cc->clockcontrol_m2); -+ orig_ratio_parm = 0; -+ orig_ratio_cfg = 0; -+ -+ /* Look up current ratio */ -+ for (i = 0; i < tabsz; i++) { -+ if ((orig_n == table[i].n) && -+ (orig_sb == table[i].sb) && -+ (orig_pci == table[i].pci33) && -+ (orig_m2 == table[i].m2) && -+ (orig_mips == table[i].m3)) { -+ orig_ratio_parm = table[i].ratio_parm; -+ orig_ratio_cfg = table[i].ratio_cfg; -+ break; -+ } -+ } -+ -+ /* Search for the closest MIPS clock greater or equal to a preferred value */ -+ for (i = 0; i < tabsz; i++) { -+ ASSERT(table[i].mipsclock == -+ sb_clock_rate(pll_type, table[i].n, table[i].m3)); -+ if ((mipsclock <= table[i].mipsclock) && -+ ((sbclock == 0) || (sbclock <= table[i].sbclock))) -+ break; -+ } -+ if (i == tabsz) { -+ ret = FALSE; -+ goto done; -+ } else { -+ te = &table[i]; -+ ret = TRUE; -+ } -+ -+ /* No PLL change */ -+ if ((orig_n == te->n) && -+ (orig_sb == te->sb) && -+ (orig_pci == te->pci33) && -+ (orig_m2 == te->m2) && -+ (orig_mips == te->m3)) -+ goto done; -+ -+ /* Set the PLL controls */ -+ W_REG(osh, clockcontrol_n, te->n); -+ W_REG(osh, clockcontrol_sb, te->sb); -+ W_REG(osh, clockcontrol_pci, te->pci33); -+ W_REG(osh, &cc->clockcontrol_m2, te->m2); -+ W_REG(osh, &cc->clockcontrol_m3, te->m3); -+ -+ /* Set the chipcontrol bit to change mipsref to the backplane divider if needed */ -+ if ((pll_type == PLL_TYPE7) && (te->sb != te->m2) && -+ (sb_clock_rate(pll_type, te->n, te->m2) == 120000000)) -+ W_REG(osh, &cc->chipcontrol, -+ R_REG(osh, &cc->chipcontrol) | 0x100); -+ -+ /* No ratio change */ -+ if (sb_chip(sbh) != BCM4785_CHIP_ID) { -+ if (orig_ratio_parm == te->ratio_parm) -+ goto end_fill; -+ } -+ -+ /* Preload the code into the cache */ -+ icache_probe(MFC0(C0_CONFIG, 1), &ic_size, &ic_lsize); -+ if (sb_chip(sbh) == BCM4785_CHIP_ID) { -+ start = ((ulong) &&start_fill_4785) & ~(ic_lsize - 1); -+ end = ((ulong) &&end_fill_4785 + (ic_lsize - 1)) & ~(ic_lsize - 1); -+ } -+ else { -+ start = ((ulong) &&start_fill) & ~(ic_lsize - 1); -+ end = ((ulong) &&end_fill + (ic_lsize - 1)) & ~(ic_lsize - 1); -+ } -+ while (start < end) { -+ cache_op(start, Fill_I); -+ start += ic_lsize; -+ } -+ -+ /* Copy the handler */ -+ start = (ulong) &handler; -+ end = (ulong) &afterhandler; -+ dst = KSEG1ADDR(0x180); -+ for (i = 0; i < (end - start); i += 4) -+ *((ulong *)(dst + i)) = *((ulong *)(start + i)); -+ -+ /* Preload the handler into the cache one line at a time */ -+ for (i = 0; i < (end - start); i += ic_lsize) -+ cache_op(dst + i, Fill_I); -+ -+ /* Clear BEV bit */ -+ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~ST0_BEV); -+ -+ /* Enable interrupts */ -+ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) | (ALLINTS | ST0_IE)); -+ -+ /* 4785 clock freq change procedures */ -+ if (sb_chip(sbh) == BCM4785_CHIP_ID) { -+ start_fill_4785: -+ /* Switch to async */ -+ MTC0(C0_BROADCOM, 4, (1 << 22)); -+ -+ /* Set clock ratio in MIPS */ -+ *dll_r1 = (*dll_r1 & 0xfffffff0) | (te->d11_r1 - 1); -+ *dll_r2 = te->d11_r2; -+ -+ /* Enable new settings in MIPS */ -+ *dll_r1 = *dll_r1 | 0xc0000000; -+ -+ /* Set active cfg */ -+ MTC0(C0_BROADCOM, 2, MFC0(C0_BROADCOM, 2) | (1 << 3) | 1); -+ -+ /* Fake soft reset (clock cfg registers not reset) */ -+ MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | (1 << 2)); -+ -+ /* Clear active cfg */ -+ MTC0(C0_BROADCOM, 2, MFC0(C0_BROADCOM, 2) & ~(1 << 3)); -+ -+ /* set watchdog timer */ -+ W_REG(osh, &cc->watchdog, 20); -+ (void) R_REG(osh, &cc->chipid); -+ -+ /* wait for timer interrupt */ -+ __asm__ __volatile__( -+ ".set\tmips3\n\t" -+ "sync\n\t" -+ "wait\n\t" -+ ".set\tmips0"); -+ end_fill_4785: -+ while (1); -+ } -+ /* Generic clock freq change procedures */ -+ else { -+ /* Enable MIPS timer interrupt */ -+ if (!(mipsr = sb_setcore(sbh, SB_MIPS, 0)) && -+ !(mipsr = sb_setcore(sbh, SB_MIPS33, 0))) -+ ASSERT(mipsr); -+ W_REG(osh, &mipsr->intmask, 1); -+ -+ start_fill: -+ /* step 1, set clock ratios */ -+ MTC0(C0_BROADCOM, 3, te->ratio_parm); -+ MTC0(C0_BROADCOM, 1, te->ratio_cfg); -+ -+ /* step 2: program timer intr */ -+ W_REG(osh, &mipsr->timer, 100); -+ (void) R_REG(osh, &mipsr->timer); -+ -+ /* step 3, switch to async */ -+ sync_mode = MFC0(C0_BROADCOM, 4); -+ MTC0(C0_BROADCOM, 4, 1 << 22); -+ -+ /* step 4, set cfg active */ -+ MTC0(C0_BROADCOM, 2, (1 << 3) | 1); -+ -+ /* steps 5 & 6 */ -+ __asm__ __volatile__( -+ ".set\tmips3\n\t" -+ "wait\n\t" -+ ".set\tmips0"); -+ -+ /* step 7, clear cfg active */ -+ MTC0(C0_BROADCOM, 2, 0); -+ -+ /* Additional Step: set back to orig sync mode */ -+ MTC0(C0_BROADCOM, 4, sync_mode); -+ -+ /* step 8, fake soft reset */ -+ MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | (1 << 2)); -+ -+ end_fill: -+ /* set watchdog timer */ -+ W_REG(osh, &cc->watchdog, 20); -+ (void) R_REG(osh, &cc->chipid); -+ -+ /* wait for timer interrupt */ -+ __asm__ __volatile__( -+ ".set\tmips3\n\t" -+ "sync\n\t" -+ "wait\n\t" -+ ".set\tmips0"); -+ while (1); -+ } -+ } -+ -+done: -+ /* Enable 4785 DLL */ -+ if (sb_chip(sbh) == BCM4785_CHIP_ID) { -+ uint32 tmp; -+ -+ /* set mask to 1e, enable DLL (bit 0) */ -+ *dll_ctrl |= 0x0041e021; -+ -+ /* enable aggressive hardware mode */ -+ *dll_ctrl |= 0x00000080; -+ -+ /* wait for lock flag to clear */ -+ while ((*dll_ctrl & 0x2) == 0); -+ -+ /* clear sticky flags (clear on write 1) */ -+ tmp = *dll_ctrl; -+ *dll_ctrl = tmp; -+ -+ /* set mask to 5b'10001 */ -+ *dll_ctrl = (*dll_ctrl & 0xfffc1fff) | 0x00022000; -+ -+ /* enable sync mode */ -+ MTC0(C0_BROADCOM, 4, MFC0(C0_BROADCOM, 4) & 0xfe3fffff); -+ (void)MFC0(C0_BROADCOM, 4); -+ } -+ -+ /* switch back to previous core */ -+ sb_setcoreidx(sbh, idx); -+ -+ return ret; -+} -+ -+void -+BCMINITFN(enable_pfc)(uint32 mode) -+{ -+ ulong start, end; -+ uint ic_size, ic_lsize; -+ -+ /* If auto then choose the correct mode for this -+ * platform, currently we only ever select one mode -+ */ -+ if (mode == PFC_AUTO) -+ mode = PFC_INST; -+ -+ icache_probe(MFC0(C0_CONFIG, 1), &ic_size, &ic_lsize); -+ -+ /* enable prefetch cache if available */ -+ if (MFC0(C0_BROADCOM, 0) & BRCM_PFC_AVAIL) { -+ start = ((ulong) &&setpfc_start) & ~(ic_lsize - 1); -+ end = ((ulong) &&setpfc_end + (ic_lsize - 1)) & ~(ic_lsize - 1); -+ -+ /* Preload setpfc code into the cache one line at a time */ -+ while (start < end) { -+ cache_op(start, Fill_I); -+ start += ic_lsize; -+ } -+ -+ /* Now set the pfc */ -+ setpfc_start: -+ /* write range */ -+ *(volatile uint32 *)PFC_CR1 = 0xffff0000; -+ -+ /* enable */ -+ *(volatile uint32 *)PFC_CR0 = mode; -+ setpfc_end: -+ /* Compiler foder */ -+ ic_size = 0; -+ } -+} -+ -+/* returns the ncdl value to be programmed into sdram_ncdl for calibration */ -+uint32 -+BCMINITFN(sb_memc_get_ncdl)(sb_t *sbh) -+{ -+ osl_t *osh; -+ sbmemcregs_t *memc; -+ uint32 ret = 0; -+ uint32 config, rd, wr, misc, dqsg, cd, sm, sd; -+ uint idx, rev; -+ -+ osh = sb_osh(sbh); -+ -+ idx = sb_coreidx(sbh); -+ -+ memc = (sbmemcregs_t *)sb_setcore(sbh, SB_MEMC, 0); -+ if (memc == 0) -+ goto out; -+ -+ rev = sb_corerev(sbh); -+ -+ config = R_REG(osh, &memc->config); -+ wr = R_REG(osh, &memc->wrncdlcor); -+ rd = R_REG(osh, &memc->rdncdlcor); -+ misc = R_REG(osh, &memc->miscdlyctl); -+ dqsg = R_REG(osh, &memc->dqsgatencdl); -+ -+ rd &= MEMC_RDNCDLCOR_RD_MASK; -+ wr &= MEMC_WRNCDLCOR_WR_MASK; -+ dqsg &= MEMC_DQSGATENCDL_G_MASK; -+ -+ if (config & MEMC_CONFIG_DDR) { -+ ret = (wr << 16) | (rd << 8) | dqsg; -+ } else { -+ if (rev > 0) -+ cd = rd; -+ else -+ cd = (rd == MEMC_CD_THRESHOLD) ? rd : (wr + MEMC_CD_THRESHOLD); -+ sm = (misc & MEMC_MISC_SM_MASK) >> MEMC_MISC_SM_SHIFT; -+ sd = (misc & MEMC_MISC_SD_MASK) >> MEMC_MISC_SD_SHIFT; -+ ret = (sm << 16) | (sd << 8) | cd; -+ } -+ -+out: -+ /* switch back to previous core */ -+ sb_setcoreidx(sbh, idx); -+ -+ return ret; -+} -+ -+#if defined(BCMPERFSTATS) -+/* -+ * CP0 Register 25 supports 4 semi-independent 32bit performance counters. -+ * $25 select 0, 1, 2, and 3 are the counters. The counters *decrement* (who thought this one up?) -+ * $25 select 4 and 5 each contain 2-16bit control fields, one for each of the 4 counters -+ * $25 select 6 is the global perf control register. -+ */ -+/* enable and start instruction counting */ -+ -+void -+hndmips_perf_instrcount_enable() -+{ -+ MTC0(C0_PERFORMANCE, 6, 0x80000200); /* global enable perf counters */ -+ MTC0(C0_PERFORMANCE, 4, -+ 0x8044 | MFC0(C0_PERFORMANCE, 4)); /* enable instruction counting for counter 0 */ -+ MTC0(C0_PERFORMANCE, 0, 0); /* zero counter zero */ -+} -+ -+/* enable and start I$ hit and I$ miss counting */ -+void -+hndmips_perf_icachecount_enable(void) -+{ -+ MTC0(C0_PERFORMANCE, 6, 0x80000218); /* enable I$ counting */ -+ MTC0(C0_PERFORMANCE, 4, 0x80148018); /* count I$ hits in cntr 0 and misses in cntr 1 */ -+ MTC0(C0_PERFORMANCE, 0, 0); /* zero counter 0 - # I$ hits */ -+ MTC0(C0_PERFORMANCE, 1, 0); /* zero counter 1 - # I$ misses */ -+} -+ -+/* enable and start D$ hit and I$ miss counting */ -+void -+hndmips_perf_dcachecount_enable(void) -+{ -+ MTC0(C0_PERFORMANCE, 6, 0x80000211); /* enable D$ counting */ -+ MTC0(C0_PERFORMANCE, 4, 0x80248028); /* count D$ hits in cntr 0 and misses in cntr 1 */ -+ MTC0(C0_PERFORMANCE, 0, 0); /* zero counter 0 - # D$ hits */ -+ MTC0(C0_PERFORMANCE, 1, 0); /* zero counter 1 - # D$ misses */ -+} -+ -+void -+hndmips_perf_icache_miss_enable() -+{ -+ MTC0(C0_PERFORMANCE, 4, -+ 0x80140000 | MFC0(C0_PERFORMANCE, 4)); /* enable cache misses counting for counter 1 */ -+ MTC0(C0_PERFORMANCE, 1, 0); /* zero counter one */ -+} -+ -+ -+void -+hndmips_perf_icache_hit_enable() -+{ -+ MTC0(C0_PERFORMANCE, 5, 0x8018 | MFC0(C0_PERFORMANCE, 5)); -+ /* enable cache hits counting for counter 2 */ -+ MTC0(C0_PERFORMANCE, 2, 0); /* zero counter 2 */ -+} -+ -+uint32 -+hndmips_perf_read_instrcount() -+{ -+ return -(long)(MFC0(C0_PERFORMANCE, 0)); -+} -+ -+uint32 -+hndmips_perf_read_cache_miss() -+{ -+ return -(long)(MFC0(C0_PERFORMANCE, 1)); -+} -+ -+uint32 -+hndmips_perf_read_cache_hit() -+{ -+ return -(long)(MFC0(C0_PERFORMANCE, 2)); -+} -+ -+#endif /* BCMINTERNAL | BCMPERFSTATS */ -diff -urN linux.old/arch/mips/bcm947xx/sbpci.c linux.dev/arch/mips/bcm947xx/sbpci.c ---- linux.old/arch/mips/bcm947xx/sbpci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/sbpci.c 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,768 @@ -+/* -+ * Low-Level PCI and SB support for BCM47xx -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: hndpci.c,v 1.1.1.3 2006/04/08 06:13:39 honor Exp $ -+ */ -+ -+#include <typedefs.h> -+#include <osl.h> -+#include <pcicfg.h> -+#include <bcmdevs.h> -+#include <sbconfig.h> -+#include <bcmutils.h> -+#include <sbutils.h> -+#include <sbpci.h> -+#include <bcmendian.h> -+#include <bcmnvram.h> -+#include <hndcpu.h> -+#include <hndmips.h> -+#include <hndpci.h> -+ -+/* debug/trace */ -+#ifdef BCMDBG_PCI -+#define PCI_MSG(args) printf args -+#else -+#define PCI_MSG(args) -+#endif /* BCMDBG_PCI */ -+ -+/* Can free sbpci_init() memory after boot */ -+#ifndef linux -+#define __init -+#endif /* linux */ -+ -+/* Emulated configuration space */ -+typedef struct { -+ int n; -+ uint size0; -+ uint size1; -+ uint size2; -+ uint size3; -+} sb_bar_cfg_t; -+static pci_config_regs sb_config_regs[SB_MAXCORES]; -+static sb_bar_cfg_t sb_bar_cfg[SB_MAXCORES]; -+ -+/* Links to emulated and real PCI configuration spaces */ -+#define MAXFUNCS 2 -+typedef struct { -+ pci_config_regs *emu; /* emulated PCI config */ -+ pci_config_regs *pci; /* real PCI config */ -+ sb_bar_cfg_t *bar; /* region sizes */ -+} sb_pci_cfg_t; -+static sb_pci_cfg_t sb_pci_cfg[SB_MAXCORES][MAXFUNCS]; -+ -+/* Special emulated config space for non-existing device */ -+static pci_config_regs sb_pci_null = { 0xffff, 0xffff }; -+ -+/* Banned cores */ -+static uint16 pci_ban[SB_MAXCORES] = { 0 }; -+static uint pci_banned = 0; -+ -+/* CardBus mode */ -+static bool cardbus = FALSE; -+ -+/* Disable PCI host core */ -+static bool pci_disabled = FALSE; -+ -+/* Host bridge slot #, default to 0 */ -+static uint8 pci_hbslot = 0; -+ -+/* Internal macros */ -+#define PCI_SLOTAD_MAP 16 /* SLOT<n> mapps to AD<n+16> */ -+#define PCI_HBSBCFG_REV 8 /* MIN. core rev. required to -+ * access host bridge PCI cfg space -+ * from SB -+ */ -+ -+/* -+ * Functions for accessing external PCI configuration space -+ */ -+ -+/* Assume one-hot slot wiring */ -+#define PCI_SLOT_MAX 16 /* Max. PCI Slots */ -+ -+static uint32 -+config_cmd(sb_t *sbh, uint bus, uint dev, uint func, uint off) -+{ -+ uint coreidx; -+ sbpciregs_t *regs; -+ uint32 addr = 0; -+ osl_t *osh; -+ -+ /* CardBusMode supports only one device */ -+ if (cardbus && dev > 1) -+ return 0; -+ -+ osh = sb_osh(sbh); -+ -+ coreidx = sb_coreidx(sbh); -+ regs = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0); -+ -+ /* Type 0 transaction */ -+ if (bus == 1) { -+ /* Skip unwired slots */ -+ if (dev < PCI_SLOT_MAX) { -+ uint32 win; -+ -+ /* Slide the PCI window to the appropriate slot */ -+ win = (SBTOPCI_CFG0 | ((1 << (dev + PCI_SLOTAD_MAP)) & SBTOPCI1_MASK)); -+ W_REG(osh, ®s->sbtopci1, win); -+ addr = SB_PCI_CFG | -+ ((1 << (dev + PCI_SLOTAD_MAP)) & ~SBTOPCI1_MASK) | -+ (func << PCICFG_FUN_SHIFT) | -+ (off & ~3); -+ } -+ } else { -+ /* Type 1 transaction */ -+ W_REG(osh, ®s->sbtopci1, SBTOPCI_CFG1); -+ addr = SB_PCI_CFG | -+ (bus << PCICFG_BUS_SHIFT) | -+ (dev << PCICFG_SLOT_SHIFT) | -+ (func << PCICFG_FUN_SHIFT) | -+ (off & ~3); -+ } -+ -+ sb_setcoreidx(sbh, coreidx); -+ -+ return addr; -+} -+ -+/* -+ * Read host bridge PCI config registers from Silicon Backplane (>=rev8). -+ * -+ * It returns TRUE to indicate that access to the host bridge's pci config -+ * from SB is ok, and values in 'addr' and 'val' are valid. -+ * -+ * It can only read registers at multiple of 4-bytes. Callers must pick up -+ * needed bytes from 'val' based on 'off' value. Value in 'addr' reflects -+ * the register address where value in 'val' is read. -+ */ -+static bool -+sb_pcihb_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, -+ uint32 **addr, uint32 *val) -+{ -+ sbpciregs_t *regs; -+ osl_t *osh; -+ uint coreidx; -+ bool ret = FALSE; -+ -+ /* sanity check */ -+ ASSERT(bus == 1); -+ ASSERT(dev == pci_hbslot); -+ ASSERT(func == 0); -+ -+ osh = sb_osh(sbh); -+ -+ /* read pci config when core rev >= 8 */ -+ coreidx = sb_coreidx(sbh); -+ regs = (sbpciregs_t *)sb_setcore(sbh, SB_PCI, 0); -+ if (regs && sb_corerev(sbh) >= PCI_HBSBCFG_REV) { -+ *addr = (uint32 *)®s->pcicfg[func][off >> 2]; -+ *val = R_REG(osh, *addr); -+ ret = TRUE; -+ } -+ sb_setcoreidx(sbh, coreidx); -+ -+ return ret; -+} -+ -+int -+extpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) -+{ -+ uint32 addr = 0, *reg = NULL, val; -+ int ret = 0; -+ -+ /* -+ * Set value to -1 when: -+ * flag 'pci_disabled' is true; -+ * value of 'addr' is zero; -+ * REG_MAP() fails; -+ * BUSPROBE() fails; -+ */ -+ if (pci_disabled) -+ val = 0xffffffff; -+ else if (bus == 1 && dev == pci_hbslot && func == 0 && -+ sb_pcihb_read_config(sbh, bus, dev, func, off, ®, &val)) -+ ; -+ else if (((addr = config_cmd(sbh, bus, dev, func, off)) == 0) || -+ ((reg = (uint32 *)REG_MAP(addr, len)) == 0) || -+ (BUSPROBE(val, reg) != 0)) -+ val = 0xffffffff; -+ -+ PCI_MSG(("%s: 0x%x <= 0x%p(0x%x), len %d, off 0x%x, buf 0x%p\n", -+ __FUNCTION__, val, reg, addr, len, off, buf)); -+ -+ val >>= 8 * (off & 3); -+ if (len == 4) -+ *((uint32 *) buf) = val; -+ else if (len == 2) -+ *((uint16 *) buf) = (uint16) val; -+ else if (len == 1) -+ *((uint8 *) buf) = (uint8) val; -+ else -+ ret = -1; -+ -+ if (reg && addr) -+ REG_UNMAP(reg); -+ -+ return ret; -+} -+ -+int -+extpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) -+{ -+ osl_t *osh; -+ uint32 addr = 0, *reg = NULL, val; -+ int ret = 0; -+ -+ osh = sb_osh(sbh); -+ -+ /* -+ * Ignore write attempt when: -+ * flag 'pci_disabled' is true; -+ * value of 'addr' is zero; -+ * REG_MAP() fails; -+ * BUSPROBE() fails; -+ */ -+ if (pci_disabled) -+ return 0; -+ else if (bus == 1 && dev == pci_hbslot && func == 0 && -+ sb_pcihb_read_config(sbh, bus, dev, func, off, ®, &val)) -+ ; -+ else if (((addr = config_cmd(sbh, bus, dev, func, off)) == 0) || -+ ((reg = (uint32 *) REG_MAP(addr, len)) == 0) || -+ (BUSPROBE(val, reg) != 0)) -+ goto done; -+ -+ if (len == 4) -+ val = *((uint32 *) buf); -+ else if (len == 2) { -+ val &= ~(0xffff << (8 * (off & 3))); -+ val |= *((uint16 *) buf) << (8 * (off & 3)); -+ } else if (len == 1) { -+ val &= ~(0xff << (8 * (off & 3))); -+ val |= *((uint8 *) buf) << (8 * (off & 3)); -+ } else { -+ ret = -1; -+ goto done; -+ } -+ -+ PCI_MSG(("%s: 0x%x => 0x%p\n", __FUNCTION__, val, reg)); -+ -+ W_REG(osh, reg, val); -+ -+done: -+ if (reg && addr) -+ REG_UNMAP(reg); -+ -+ return ret; -+} -+ -+/* -+ * Must access emulated PCI configuration at these locations even when -+ * the real PCI config space exists and is accessible. -+ * -+ * PCI_CFG_VID (0x00) -+ * PCI_CFG_DID (0x02) -+ * PCI_CFG_PROGIF (0x09) -+ * PCI_CFG_SUBCL (0x0a) -+ * PCI_CFG_BASECL (0x0b) -+ * PCI_CFG_HDR (0x0e) -+ * PCI_CFG_INT (0x3c) -+ * PCI_CFG_PIN (0x3d) -+ */ -+#define FORCE_EMUCFG(off, len) \ -+ ((off == PCI_CFG_VID) || (off == PCI_CFG_DID) || \ -+ (off == PCI_CFG_PROGIF) || \ -+ (off == PCI_CFG_SUBCL) || (off == PCI_CFG_BASECL) || \ -+ (off == PCI_CFG_HDR) || \ -+ (off == PCI_CFG_INT) || (off == PCI_CFG_PIN)) -+ -+/* Sync the emulation registers and the real PCI config registers. */ -+static void -+sb_pcid_read_config(sb_t *sbh, uint coreidx, sb_pci_cfg_t *cfg, -+ uint off, uint len) -+{ -+ osl_t *osh; -+ uint oldidx; -+ -+ ASSERT(cfg); -+ ASSERT(cfg->emu); -+ ASSERT(cfg->pci); -+ -+ /* decide if real PCI config register access is necessary */ -+ if (FORCE_EMUCFG(off, len)) -+ return; -+ -+ osh = sb_osh(sbh); -+ -+ /* access to the real pci config space only when the core is up */ -+ oldidx = sb_coreidx(sbh); -+ sb_setcoreidx(sbh, coreidx); -+ if (sb_iscoreup(sbh)) { -+ if (len == 4) -+ *(uint32 *)((ulong)cfg->emu + off) = -+ htol32(R_REG(osh, (uint32 *)((ulong)cfg->pci + off))); -+ else if (len == 2) -+ *(uint16 *)((ulong)cfg->emu + off) = -+ htol16(R_REG(osh, (uint16 *)((ulong)cfg->pci + off))); -+ else if (len == 1) -+ *(uint8 *)((ulong)cfg->emu + off) = -+ R_REG(osh, (uint8 *)((ulong)cfg->pci + off)); -+ } -+ sb_setcoreidx(sbh, oldidx); -+} -+ -+static void -+sb_pcid_write_config(sb_t *sbh, uint coreidx, sb_pci_cfg_t *cfg, -+ uint off, uint len) -+{ -+ osl_t *osh; -+ uint oldidx; -+ -+ ASSERT(cfg); -+ ASSERT(cfg->emu); -+ ASSERT(cfg->pci); -+ -+ osh = sb_osh(sbh); -+ -+ /* decide if real PCI config register access is necessary */ -+ if (FORCE_EMUCFG(off, len)) -+ return; -+ -+ /* access to the real pci config space only when the core is up */ -+ oldidx = sb_coreidx(sbh); -+ sb_setcoreidx(sbh, coreidx); -+ if (sb_iscoreup(sbh)) { -+ if (len == 4) -+ W_REG(osh, (uint32 *)((ulong)cfg->pci + off), -+ ltoh32(*(uint32 *)((ulong)cfg->emu + off))); -+ else if (len == 2) -+ W_REG(osh, (uint16 *)((ulong)cfg->pci + off), -+ ltoh16(*(uint16 *)((ulong)cfg->emu + off))); -+ else if (len == 1) -+ W_REG(osh, (uint8 *)((ulong)cfg->pci + off), -+ *(uint8 *)((ulong)cfg->emu + off)); -+ } -+ sb_setcoreidx(sbh, oldidx); -+} -+ -+/* -+ * Functions for accessing translated SB configuration space -+ */ -+static int -+sb_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) -+{ -+ pci_config_regs *cfg; -+ -+ if (dev >= SB_MAXCORES || func >= MAXFUNCS || (off + len) > sizeof(pci_config_regs)) -+ return -1; -+ cfg = sb_pci_cfg[dev][func].emu; -+ -+ ASSERT(ISALIGNED(off, len)); -+ ASSERT(ISALIGNED((uintptr)buf, len)); -+ -+ /* use special config space if the device does not exist */ -+ if (!cfg) -+ cfg = &sb_pci_null; -+ /* sync emulation with real PCI config if necessary */ -+ else if (sb_pci_cfg[dev][func].pci) -+ sb_pcid_read_config(sbh, dev, &sb_pci_cfg[dev][func], off, len); -+ -+ if (len == 4) -+ *((uint32 *) buf) = ltoh32(*((uint32 *)((ulong) cfg + off))); -+ else if (len == 2) -+ *((uint16 *) buf) = ltoh16(*((uint16 *)((ulong) cfg + off))); -+ else if (len == 1) -+ *((uint8 *) buf) = *((uint8 *)((ulong) cfg + off)); -+ else -+ return -1; -+ -+ return 0; -+} -+ -+static int -+sb_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) -+{ -+ uint coreidx; -+ void *regs; -+ pci_config_regs *cfg; -+ osl_t *osh; -+ sb_bar_cfg_t *bar; -+ -+ if (dev >= SB_MAXCORES || func >= MAXFUNCS || (off + len) > sizeof(pci_config_regs)) -+ return -1; -+ cfg = sb_pci_cfg[dev][func].emu; -+ if (!cfg) -+ return -1; -+ -+ ASSERT(ISALIGNED(off, len)); -+ ASSERT(ISALIGNED((uintptr)buf, len)); -+ -+ osh = sb_osh(sbh); -+ -+ /* Emulate BAR sizing */ -+ if (off >= OFFSETOF(pci_config_regs, base[0]) && -+ off <= OFFSETOF(pci_config_regs, base[3]) && -+ len == 4 && *((uint32 *) buf) == ~0) { -+ coreidx = sb_coreidx(sbh); -+ if ((regs = sb_setcoreidx(sbh, dev))) { -+ bar = sb_pci_cfg[dev][func].bar; -+ /* Highest numbered address match register */ -+ if (off == OFFSETOF(pci_config_regs, base[0])) -+ cfg->base[0] = ~(bar->size0 - 1); -+ else if (off == OFFSETOF(pci_config_regs, base[1]) && bar->n >= 1) -+ cfg->base[1] = ~(bar->size1 - 1); -+ else if (off == OFFSETOF(pci_config_regs, base[2]) && bar->n >= 2) -+ cfg->base[2] = ~(bar->size2 - 1); -+ else if (off == OFFSETOF(pci_config_regs, base[3]) && bar->n >= 3) -+ cfg->base[3] = ~(bar->size3 - 1); -+ } -+ sb_setcoreidx(sbh, coreidx); -+ } -+ else if (len == 4) -+ *((uint32 *)((ulong) cfg + off)) = htol32(*((uint32 *) buf)); -+ else if (len == 2) -+ *((uint16 *)((ulong) cfg + off)) = htol16(*((uint16 *) buf)); -+ else if (len == 1) -+ *((uint8 *)((ulong) cfg + off)) = *((uint8 *) buf); -+ else -+ return -1; -+ -+ /* sync emulation with real PCI config if necessary */ -+ if (sb_pci_cfg[dev][func].pci) -+ sb_pcid_write_config(sbh, dev, &sb_pci_cfg[dev][func], off, len); -+ -+ return 0; -+} -+ -+int -+sbpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) -+{ -+ if (bus == 0) -+ return sb_read_config(sbh, bus, dev, func, off, buf, len); -+ else -+ return extpci_read_config(sbh, bus, dev, func, off, buf, len); -+} -+ -+int -+sbpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) -+{ -+ if (bus == 0) -+ return sb_write_config(sbh, bus, dev, func, off, buf, len); -+ else -+ return extpci_write_config(sbh, bus, dev, func, off, buf, len); -+} -+ -+void -+sbpci_ban(uint16 core) -+{ -+ if (pci_banned < ARRAYSIZE(pci_ban)) -+ pci_ban[pci_banned++] = core; -+} -+ -+/* -+ * Initiliaze PCI core. Return 0 after a successful initialization. -+ * Otherwise return -1 to indicate there is no PCI core and return 1 -+ * to indicate PCI core is disabled. -+ */ -+int __init -+sbpci_init_pci(sb_t *sbh) -+{ -+ uint chip, chiprev, chippkg, host; -+ uint32 boardflags; -+ sbpciregs_t *pci; -+ sbconfig_t *sb; -+ uint32 val; -+ int ret = 0; -+ char *hbslot; -+ osl_t *osh; -+ -+ chip = sb_chip(sbh); -+ chiprev = sb_chiprev(sbh); -+ chippkg = sb_chippkg(sbh); -+ -+ osh = sb_osh(sbh); -+ -+ if (!(pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0))) { -+ printk("PCI: no core\n"); -+ pci_disabled = TRUE; -+ return -1; -+ } -+ -+ if ((chip == 0x4310) && (chiprev == 0)) -+ pci_disabled = TRUE; -+ -+ sb = (sbconfig_t *)((ulong) pci + SBCONFIGOFF); -+ -+ boardflags = (uint32) getintvar(NULL, "boardflags"); -+ -+ /* -+ * The 200-pin BCM4712 package does not bond out PCI. Even when -+ * PCI is bonded out, some boards may leave the pins -+ * floating. -+ */ -+ if (((chip == BCM4712_CHIP_ID) && -+ ((chippkg == BCM4712SMALL_PKG_ID) || -+ (chippkg == BCM4712MID_PKG_ID))) || -+ (boardflags & BFL_NOPCI)) -+ pci_disabled = TRUE; -+ -+ /* Enable the core */ -+ sb_core_reset(sbh, 0, 0); -+ -+ /* -+ * If the PCI core should not be touched (disabled, not bonded -+ * out, or pins floating), do not even attempt to access core -+ * registers. Otherwise, try to determine if it is in host -+ * mode. -+ */ -+ if (pci_disabled) -+ host = 0; -+ else -+ host = !BUSPROBE(val, &pci->control); -+ -+ if (!host) { -+ ret = 1; -+ -+ /* Disable PCI interrupts in client mode */ -+ W_REG(osh, &sb->sbintvec, 0); -+ -+ /* Disable the PCI bridge in client mode */ -+ sbpci_ban(SB_PCI); -+ sb_core_disable(sbh, 0); -+ -+ printk("PCI: Disabled\n"); -+ } else { -+ printk("PCI: Initializing host\n"); -+ -+ /* Disable PCI SBReqeustTimeout for BCM4785 */ -+ if (chip == BCM4785_CHIP_ID) { -+ AND_REG(osh, &sb->sbimconfiglow, ~0x00000070); -+ sb_commit(sbh); -+ } -+ -+ /* Reset the external PCI bus and enable the clock */ -+ W_REG(osh, &pci->control, 0x5); /* enable the tristate drivers */ -+ W_REG(osh, &pci->control, 0xd); /* enable the PCI clock */ -+ OSL_DELAY(150); /* delay > 100 us */ -+ W_REG(osh, &pci->control, 0xf); /* deassert PCI reset */ -+ /* Use internal arbiter and park REQ/GRNT at external master 0 */ -+ W_REG(osh, &pci->arbcontrol, PCI_INT_ARB); -+ OSL_DELAY(1); /* delay 1 us */ -+ if (sb_corerev(sbh) >= 8) { -+ val = getintvar(NULL, "parkid"); -+ ASSERT(val <= PCI_PARKID_LAST); -+ OR_REG(osh, &pci->arbcontrol, val << PCI_PARKID_SHIFT); -+ OSL_DELAY(1); -+ } -+ -+ /* Enable CardBusMode */ -+ cardbus = getintvar(NULL, "cardbus") == 1; -+ if (cardbus) { -+ printk("PCI: Enabling CardBus\n"); -+ /* GPIO 1 resets the CardBus device on bcm94710ap */ -+ sb_gpioout(sbh, 1, 1, GPIO_DRV_PRIORITY); -+ sb_gpioouten(sbh, 1, 1, GPIO_DRV_PRIORITY); -+ W_REG(osh, &pci->sprom[0], R_REG(osh, &pci->sprom[0]) | 0x400); -+ } -+ -+ /* 64 MB I/O access window */ -+ W_REG(osh, &pci->sbtopci0, SBTOPCI_IO); -+ /* 64 MB configuration access window */ -+ W_REG(osh, &pci->sbtopci1, SBTOPCI_CFG0); -+ /* 1 GB memory access window */ -+ W_REG(osh, &pci->sbtopci2, SBTOPCI_MEM | SB_PCI_DMA); -+ -+ /* Host bridge slot # nvram overwrite */ -+ if ((hbslot = nvram_get("pcihbslot"))) { -+ pci_hbslot = bcm_strtoul(hbslot, NULL, 0); -+ ASSERT(pci_hbslot < PCI_MAX_DEVICES); -+ } -+ -+ /* Enable PCI bridge BAR0 prefetch and burst */ -+ val = 6; -+ sbpci_write_config(sbh, 1, pci_hbslot, 0, PCI_CFG_CMD, &val, sizeof(val)); -+ -+ /* Enable PCI interrupts */ -+ W_REG(osh, &pci->intmask, PCI_INTA); -+ } -+ -+ return ret; -+} -+ -+/* -+ * Get the PCI region address and size information. -+ */ -+static void __init -+sbpci_init_regions(sb_t *sbh, uint func, pci_config_regs *cfg, sb_bar_cfg_t *bar) -+{ -+ osl_t *osh; -+ uint16 coreid; -+ void *regs; -+ sbconfig_t *sb; -+ uint32 base; -+ -+ osh = sb_osh(sbh); -+ coreid = sb_coreid(sbh); -+ regs = sb_coreregs(sbh); -+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); -+ -+ switch (coreid) { -+ case SB_USB20H: -+ base = htol32(sb_base(R_REG(osh, &sb->sbadmatch0))); -+ -+ cfg->base[0] = func == 0 ? base : base + 0x800; /* OHCI/EHCI */ -+ cfg->base[1] = 0; -+ cfg->base[2] = 0; -+ cfg->base[3] = 0; -+ cfg->base[4] = 0; -+ cfg->base[5] = 0; -+ bar->n = 1; -+ bar->size0 = func == 0 ? 0x200 : 0x100; /* OHCI/EHCI */ -+ bar->size1 = 0; -+ bar->size2 = 0; -+ bar->size3 = 0; -+ break; -+ default: -+ cfg->base[0] = htol32(sb_base(R_REG(osh, &sb->sbadmatch0))); -+ cfg->base[1] = htol32(sb_base(R_REG(osh, &sb->sbadmatch1))); -+ cfg->base[2] = htol32(sb_base(R_REG(osh, &sb->sbadmatch2))); -+ cfg->base[3] = htol32(sb_base(R_REG(osh, &sb->sbadmatch3))); -+ cfg->base[4] = 0; -+ cfg->base[5] = 0; -+ bar->n = (R_REG(osh, &sb->sbidlow) & SBIDL_AR_MASK) >> SBIDL_AR_SHIFT; -+ bar->size0 = sb_size(R_REG(osh, &sb->sbadmatch0)); -+ bar->size1 = sb_size(R_REG(osh, &sb->sbadmatch1)); -+ bar->size2 = sb_size(R_REG(osh, &sb->sbadmatch2)); -+ bar->size3 = sb_size(R_REG(osh, &sb->sbadmatch3)); -+ break; -+ } -+} -+ -+/* -+ * Construct PCI config spaces for SB cores so that they -+ * can be accessed as if they were PCI devices. -+ */ -+static void __init -+sbpci_init_cores(sb_t *sbh) -+{ -+ uint chiprev, coreidx, i; -+ sbconfig_t *sb; -+ pci_config_regs *cfg, *pci; -+ sb_bar_cfg_t *bar; -+ void *regs; -+ osl_t *osh; -+ uint16 vendor, device; -+ uint16 coreid; -+ uint8 class, subclass, progif; -+ uint dev; -+ uint8 header; -+ uint func; -+ -+ chiprev = sb_chiprev(sbh); -+ coreidx = sb_coreidx(sbh); -+ -+ osh = sb_osh(sbh); -+ -+ /* Scan the SB bus */ -+ bzero(sb_config_regs, sizeof(sb_config_regs)); -+ bzero(sb_bar_cfg, sizeof(sb_bar_cfg)); -+ bzero(sb_pci_cfg, sizeof(sb_pci_cfg)); -+ memset(&sb_pci_null, -1, sizeof(sb_pci_null)); -+ cfg = sb_config_regs; -+ bar = sb_bar_cfg; -+ for (dev = 0; dev < SB_MAXCORES; dev ++) { -+ /* Check if the core exists */ -+ if (!(regs = sb_setcoreidx(sbh, dev))) -+ continue; -+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); -+ -+ /* Check if this core is banned */ -+ coreid = sb_coreid(sbh); -+ for (i = 0; i < pci_banned; i++) -+ if (coreid == pci_ban[i]) -+ break; -+ if (i < pci_banned) -+ continue; -+ -+ for (func = 0; func < MAXFUNCS; ++func) { -+ /* Make sure we won't go beyond the limit */ -+ if (cfg >= &sb_config_regs[SB_MAXCORES]) { -+ printk("PCI: too many emulated devices\n"); -+ goto done; -+ } -+ -+ /* Convert core id to pci id */ -+ if (sb_corepciid(sbh, func, &vendor, &device, &class, &subclass, -+ &progif, &header)) -+ continue; -+ -+ /* -+ * Differentiate real PCI config from emulated. -+ * non zero 'pci' indicate there is a real PCI config space -+ * for this device. -+ */ -+ switch (device) { -+ case BCM47XX_GIGETH_ID: -+ pci = (pci_config_regs *)((uint32)regs + 0x800); -+ break; -+ case BCM47XX_SATAXOR_ID: -+ pci = (pci_config_regs *)((uint32)regs + 0x400); -+ break; -+ case BCM47XX_ATA100_ID: -+ pci = (pci_config_regs *)((uint32)regs + 0x800); -+ break; -+ default: -+ pci = NULL; -+ break; -+ } -+ /* Supported translations */ -+ cfg->vendor = htol16(vendor); -+ cfg->device = htol16(device); -+ cfg->rev_id = chiprev; -+ cfg->prog_if = progif; -+ cfg->sub_class = subclass; -+ cfg->base_class = class; -+ cfg->header_type = header; -+ sbpci_init_regions(sbh, func, cfg, bar); -+ /* Save core interrupt flag */ -+ cfg->int_pin = R_REG(osh, &sb->sbtpsflag) & SBTPS_NUM0_MASK; -+ /* Save core interrupt assignment */ -+ cfg->int_line = sb_irq(sbh); -+ /* Indicate there is no SROM */ -+ *((uint32 *) &cfg->sprom_control) = 0xffffffff; -+ -+ /* Point to the PCI config spaces */ -+ sb_pci_cfg[dev][func].emu = cfg; -+ sb_pci_cfg[dev][func].pci = pci; -+ sb_pci_cfg[dev][func].bar = bar; -+ cfg ++; -+ bar ++; -+ } -+ } -+ -+done: -+ sb_setcoreidx(sbh, coreidx); -+} -+ -+/* -+ * Initialize PCI core and construct PCI config spaces for SB cores. -+ * Must propagate sbpci_init_pci() return value to the caller to let -+ * them know the PCI core initialization status. -+ */ -+int __init -+sbpci_init(sb_t *sbh) -+{ -+ int status = sbpci_init_pci(sbh); -+ sbpci_init_cores(sbh); -+ return status; -+} -+ -diff -urN linux.old/arch/mips/bcm947xx/sbutils.c linux.dev/arch/mips/bcm947xx/sbutils.c ---- linux.old/arch/mips/bcm947xx/sbutils.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/sbutils.c 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,3103 @@ -+/* -+ * Misc utility routines for accessing chip-specific features -+ * of the SiliconBackplane-based Broadcom chips. -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id: sbutils.c,v 1.10 2006/04/08 07:12:42 honor Exp $ -+ */ -+ -+#include <typedefs.h> -+#include <bcmdefs.h> -+#include <osl.h> -+#include <bcmutils.h> -+#include <sbutils.h> -+#include <bcmdevs.h> -+#include <sbconfig.h> -+#include <sbchipc.h> -+#include <sbpci.h> -+#include <sbpcie.h> -+#include <pcicfg.h> -+#include <sbpcmcia.h> -+#include <sbextif.h> -+#include <sbsocram.h> -+#include <bcmsrom.h> -+#ifdef __mips__ -+#include <mipsinc.h> -+#endif /* __mips__ */ -+ -+/* debug/trace */ -+#define SB_ERROR(args) -+ -+typedef uint32 (*sb_intrsoff_t)(void *intr_arg); -+typedef void (*sb_intrsrestore_t)(void *intr_arg, uint32 arg); -+typedef bool (*sb_intrsenabled_t)(void *intr_arg); -+ -+/* misc sb info needed by some of the routines */ -+typedef struct sb_info { -+ -+ struct sb_pub sb; /* back plane public state (must be first field) */ -+ -+ void *osh; /* osl os handle */ -+ void *sdh; /* bcmsdh handle */ -+ -+ void *curmap; /* current regs va */ -+ void *regs[SB_MAXCORES]; /* other regs va */ -+ -+ uint curidx; /* current core index */ -+ uint dev_coreid; /* the core provides driver functions */ -+ -+ bool memseg; /* flag to toggle MEM_SEG register */ -+ -+ uint gpioidx; /* gpio control core index */ -+ uint gpioid; /* gpio control coretype */ -+ -+ uint numcores; /* # discovered cores */ -+ uint coreid[SB_MAXCORES]; /* id of each core */ -+ -+ void *intr_arg; /* interrupt callback function arg */ -+ sb_intrsoff_t intrsoff_fn; /* turns chip interrupts off */ -+ sb_intrsrestore_t intrsrestore_fn; /* restore chip interrupts */ -+ sb_intrsenabled_t intrsenabled_fn; /* check if interrupts are enabled */ -+ -+} sb_info_t; -+ -+/* local prototypes */ -+static sb_info_t * sb_doattach(sb_info_t *si, uint devid, osl_t *osh, void *regs, -+ uint bustype, void *sdh, char **vars, uint *varsz); -+static void sb_scan(sb_info_t *si); -+static uint sb_corereg(sb_info_t *si, uint coreidx, uint regoff, uint mask, uint val); -+static uint _sb_coreidx(sb_info_t *si); -+static uint sb_findcoreidx(sb_info_t *si, uint coreid, uint coreunit); -+static uint sb_pcidev2chip(uint pcidev); -+static uint sb_chip2numcores(uint chip); -+static bool sb_ispcie(sb_info_t *si); -+static bool sb_find_pci_capability(sb_info_t *si, uint8 req_cap_id, uchar *buf, uint32 *buflen); -+static int sb_pci_fixcfg(sb_info_t *si); -+ -+/* routines to access mdio slave device registers */ -+static int sb_pcie_mdiowrite(sb_info_t *si, uint physmedia, uint readdr, uint val); -+static void sb_war30841(sb_info_t *si); -+ -+/* delay needed between the mdio control/ mdiodata register data access */ -+#define PR28829_DELAY() OSL_DELAY(10) -+ -+/* size that can take bitfielddump */ -+#define BITFIELD_DUMP_SIZE 32 -+ -+/* global variable to indicate reservation/release of gpio's */ -+static uint32 sb_gpioreservation = 0; -+ -+#define SB_INFO(sbh) (sb_info_t*)sbh -+#define SET_SBREG(si, r, mask, val) \ -+ W_SBREG((si), (r), ((R_SBREG((si), (r)) & ~(mask)) | (val))) -+#define GOODCOREADDR(x) (((x) >= SB_ENUM_BASE) && ((x) <= SB_ENUM_LIM) && \ -+ ISALIGNED((x), SB_CORE_SIZE)) -+#define GOODREGS(regs) ((regs) && ISALIGNED((uintptr)(regs), SB_CORE_SIZE)) -+#define REGS2SB(va) (sbconfig_t*) ((int8*)(va) + SBCONFIGOFF) -+#define GOODIDX(idx) (((uint)idx) < SB_MAXCORES) -+#define BADIDX (SB_MAXCORES+1) -+#define NOREV -1 /* Invalid rev */ -+ -+#define PCI(si) ((BUSTYPE(si->sb.bustype) == PCI_BUS) && (si->sb.buscoretype == SB_PCI)) -+#define PCIE(si) ((BUSTYPE(si->sb.bustype) == PCI_BUS) && (si->sb.buscoretype == SB_PCIE)) -+ -+/* sonicsrev */ -+#define SONICS_2_2 (SBIDL_RV_2_2 >> SBIDL_RV_SHIFT) -+#define SONICS_2_3 (SBIDL_RV_2_3 >> SBIDL_RV_SHIFT) -+ -+#define R_SBREG(si, sbr) sb_read_sbreg((si), (sbr)) -+#define W_SBREG(si, sbr, v) sb_write_sbreg((si), (sbr), (v)) -+#define AND_SBREG(si, sbr, v) W_SBREG((si), (sbr), (R_SBREG((si), (sbr)) & (v))) -+#define OR_SBREG(si, sbr, v) W_SBREG((si), (sbr), (R_SBREG((si), (sbr)) | (v))) -+ -+/* -+ * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts before/ -+ * after core switching to avoid invalid register accesss inside ISR. -+ */ -+#define INTR_OFF(si, intr_val) \ -+ if ((si)->intrsoff_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \ -+ intr_val = (*(si)->intrsoff_fn)((si)->intr_arg); } -+#define INTR_RESTORE(si, intr_val) \ -+ if ((si)->intrsrestore_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \ -+ (*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); } -+ -+/* dynamic clock control defines */ -+#define LPOMINFREQ 25000 /* low power oscillator min */ -+#define LPOMAXFREQ 43000 /* low power oscillator max */ -+#define XTALMINFREQ 19800000 /* 20 MHz - 1% */ -+#define XTALMAXFREQ 20200000 /* 20 MHz + 1% */ -+#define PCIMINFREQ 25000000 /* 25 MHz */ -+#define PCIMAXFREQ 34000000 /* 33 MHz + fudge */ -+ -+#define ILP_DIV_5MHZ 0 /* ILP = 5 MHz */ -+#define ILP_DIV_1MHZ 4 /* ILP = 1 MHz */ -+ -+/* different register spaces to access thr'u pcie indirect access */ -+#define PCIE_CONFIGREGS 1 /* Access to config space */ -+#define PCIE_PCIEREGS 2 /* Access to pcie registers */ -+ -+/* force HT war check */ -+#define FORCEHT_WAR32414(si) \ -+ ((PCIE(si)) && (((si->sb.chip == BCM4311_CHIP_ID) && (si->sb.chiprev == 1)) || \ -+ ((si->sb.chip == BCM4321_CHIP_ID) && (si->sb.chiprev <= 3)))) -+ -+/* GPIO Based LED powersave defines */ -+#define DEFAULT_GPIO_ONTIME 10 /* Default: 10% on */ -+#define DEFAULT_GPIO_OFFTIME 90 /* Default: 10% on */ -+ -+#define DEFAULT_GPIOTIMERVAL ((DEFAULT_GPIO_ONTIME << GPIO_ONTIME_SHIFT) | DEFAULT_GPIO_OFFTIME) -+ -+static uint32 -+sb_read_sbreg(sb_info_t *si, volatile uint32 *sbr) -+{ -+ uint8 tmp; -+ uint32 val, intr_val = 0; -+ -+ -+ /* -+ * compact flash only has 11 bits address, while we needs 12 bits address. -+ * MEM_SEG will be OR'd with other 11 bits address in hardware, -+ * so we program MEM_SEG with 12th bit when necessary(access sb regsiters). -+ * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special -+ */ -+ if (si->memseg) { -+ INTR_OFF(si, intr_val); -+ tmp = 1; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); -+ sbr = (volatile uint32 *)((uintptr)sbr & ~(1 << 11)); /* mask out bit 11 */ -+ } -+ -+ val = R_REG(si->osh, sbr); -+ -+ if (si->memseg) { -+ tmp = 0; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); -+ INTR_RESTORE(si, intr_val); -+ } -+ -+ return (val); -+} -+ -+static void -+sb_write_sbreg(sb_info_t *si, volatile uint32 *sbr, uint32 v) -+{ -+ uint8 tmp; -+ volatile uint32 dummy; -+ uint32 intr_val = 0; -+ -+ -+ /* -+ * compact flash only has 11 bits address, while we needs 12 bits address. -+ * MEM_SEG will be OR'd with other 11 bits address in hardware, -+ * so we program MEM_SEG with 12th bit when necessary(access sb regsiters). -+ * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special -+ */ -+ if (si->memseg) { -+ INTR_OFF(si, intr_val); -+ tmp = 1; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); -+ sbr = (volatile uint32 *)((uintptr)sbr & ~(1 << 11)); /* mask out bit 11 */ -+ } -+ -+ if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS) { -+#ifdef IL_BIGENDIAN -+ dummy = R_REG(si->osh, sbr); -+ W_REG(si->osh, ((volatile uint16 *)sbr + 1), (uint16)((v >> 16) & 0xffff)); -+ dummy = R_REG(si->osh, sbr); -+ W_REG(si->osh, (volatile uint16 *)sbr, (uint16)(v & 0xffff)); -+#else -+ dummy = R_REG(si->osh, sbr); -+ W_REG(si->osh, (volatile uint16 *)sbr, (uint16)(v & 0xffff)); -+ dummy = R_REG(si->osh, sbr); -+ W_REG(si->osh, ((volatile uint16 *)sbr + 1), (uint16)((v >> 16) & 0xffff)); -+#endif /* IL_BIGENDIAN */ -+ } else -+ W_REG(si->osh, sbr, v); -+ -+ if (si->memseg) { -+ tmp = 0; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); -+ INTR_RESTORE(si, intr_val); -+ } -+} -+ -+/* -+ * Allocate a sb handle. -+ * devid - pci device id (used to determine chip#) -+ * osh - opaque OS handle -+ * regs - virtual address of initial core registers -+ * bustype - pci/pcmcia/sb/sdio/etc -+ * vars - pointer to a pointer area for "environment" variables -+ * varsz - pointer to int to return the size of the vars -+ */ -+sb_t * -+BCMINITFN(sb_attach)(uint devid, osl_t *osh, void *regs, -+ uint bustype, void *sdh, char **vars, uint *varsz) -+{ -+ sb_info_t *si; -+ -+ /* alloc sb_info_t */ -+ if ((si = MALLOC(osh, sizeof (sb_info_t))) == NULL) { -+ SB_ERROR(("sb_attach: malloc failed! malloced %d bytes\n", MALLOCED(osh))); -+ return (NULL); -+ } -+ -+ if (sb_doattach(si, devid, osh, regs, bustype, sdh, vars, (uint*)varsz) == NULL) { -+ MFREE(osh, si, sizeof(sb_info_t)); -+ return (NULL); -+ } -+ -+ return (sb_t *)si; -+} -+ -+/* Using sb_kattach depends on SB_BUS support, either implicit */ -+/* no limiting BCMBUSTYPE value) or explicit (value is SB_BUS). */ -+#if !defined(BCMBUSTYPE) || (BCMBUSTYPE == SB_BUS) -+ -+/* global kernel resource */ -+static sb_info_t ksi; -+static bool ksi_attached = FALSE; -+ -+/* generic kernel variant of sb_attach() */ -+sb_t * -+BCMINITFN(sb_kattach)(void) -+{ -+ osl_t *osh = NULL; -+ uint32 *regs; -+ -+ if (!ksi_attached) { -+ uint32 cid; -+ -+ regs = (uint32 *)REG_MAP(SB_ENUM_BASE, SB_CORE_SIZE); -+ cid = R_REG(osh, (uint32 *)regs); -+ if (((cid & CID_ID_MASK) == BCM4712_CHIP_ID) && -+ ((cid & CID_PKG_MASK) != BCM4712LARGE_PKG_ID) && -+ ((cid & CID_REV_MASK) <= (3 << CID_REV_SHIFT))) { -+ uint32 *scc, val; -+ -+ scc = (uint32 *)((uchar*)regs + OFFSETOF(chipcregs_t, slow_clk_ctl)); -+ val = R_REG(osh, scc); -+ SB_ERROR((" initial scc = 0x%x\n", val)); -+ val |= SCC_SS_XTAL; -+ W_REG(osh, scc, val); -+ } -+ -+ if (sb_doattach(&ksi, BCM4710_DEVICE_ID, osh, (void*)regs, -+ SB_BUS, NULL, NULL, NULL) == NULL) { -+ return NULL; -+ } -+ else -+ ksi_attached = TRUE; -+ } -+ -+ return (sb_t *)&ksi; -+} -+#endif /* !BCMBUSTYPE || (BCMBUSTYPE == SB_BUS) */ -+ -+void -+BCMINITFN(sb_war32414_forceHT)(sb_t *sbh, bool forceHT) -+{ -+ sb_info_t *si; -+ -+ si = SB_INFO(sbh); -+ -+ -+ if (FORCEHT_WAR32414(si)) { -+ uint32 val = 0; -+ if (forceHT) -+ val = SYCC_HR; -+ sb_corereg((void*)si, SB_CC_IDX, OFFSETOF(chipcregs_t, system_clk_ctl), -+ SYCC_HR, val); -+ } -+} -+ -+static sb_info_t * -+BCMINITFN(sb_doattach)(sb_info_t *si, uint devid, osl_t *osh, void *regs, -+ uint bustype, void *sdh, char **vars, uint *varsz) -+{ -+ uint origidx; -+ chipcregs_t *cc; -+ sbconfig_t *sb; -+ uint32 w; -+ -+ ASSERT(GOODREGS(regs)); -+ -+ bzero((uchar*)si, sizeof(sb_info_t)); -+ -+ si->sb.buscoreidx = si->gpioidx = BADIDX; -+ -+ si->curmap = regs; -+ si->sdh = sdh; -+ si->osh = osh; -+ -+ /* check to see if we are a sb core mimic'ing a pci core */ -+ if (bustype == PCI_BUS) { -+ if (OSL_PCI_READ_CONFIG(si->osh, PCI_SPROM_CONTROL, sizeof(uint32)) == 0xffffffff) { -+ SB_ERROR(("%s: incoming bus is PCI but it's a lie, switching to SB " -+ "devid:0x%x\n", __FUNCTION__, devid)); -+ bustype = SB_BUS; -+ } -+ } -+ -+ si->sb.bustype = bustype; -+ if (si->sb.bustype != BUSTYPE(si->sb.bustype)) { -+ SB_ERROR(("sb_doattach: bus type %d does not match configured bus type %d\n", -+ si->sb.bustype, BUSTYPE(si->sb.bustype))); -+ return NULL; -+ } -+ -+ /* need to set memseg flag for CF card first before any sb registers access */ -+ if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS) -+ si->memseg = TRUE; -+ -+ /* kludge to enable the clock on the 4306 which lacks a slowclock */ -+ if (BUSTYPE(si->sb.bustype) == PCI_BUS) -+ sb_clkctl_xtal(&si->sb, XTAL|PLL, ON); -+ -+ if (BUSTYPE(si->sb.bustype) == PCI_BUS) { -+ w = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof(uint32)); -+ if (!GOODCOREADDR(w)) -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, sizeof(uint32), SB_ENUM_BASE); -+ } -+ -+ /* initialize current core index value */ -+ si->curidx = _sb_coreidx(si); -+ -+ if (si->curidx == BADIDX) { -+ SB_ERROR(("sb_doattach: bad core index\n")); -+ return NULL; -+ } -+ -+ /* get sonics backplane revision */ -+ sb = REGS2SB(si->curmap); -+ si->sb.sonicsrev = (R_SBREG(si, &sb->sbidlow) & SBIDL_RV_MASK) >> SBIDL_RV_SHIFT; -+ -+ /* keep and reuse the initial register mapping */ -+ origidx = si->curidx; -+ if (BUSTYPE(si->sb.bustype) == SB_BUS) -+ si->regs[origidx] = regs; -+ -+ /* is core-0 a chipcommon core? */ -+ si->numcores = 1; -+ cc = (chipcregs_t*) sb_setcoreidx(&si->sb, 0); -+ if (sb_coreid(&si->sb) != SB_CC) -+ cc = NULL; -+ -+ /* determine chip id and rev */ -+ if (cc) { -+ /* chip common core found! */ -+ si->sb.chip = R_REG(si->osh, &cc->chipid) & CID_ID_MASK; -+ si->sb.chiprev = (R_REG(si->osh, &cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT; -+ si->sb.chippkg = (R_REG(si->osh, &cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT; -+ } else { -+ /* no chip common core -- must convert device id to chip id */ -+ if ((si->sb.chip = sb_pcidev2chip(devid)) == 0) { -+ SB_ERROR(("sb_doattach: unrecognized device id 0x%04x\n", devid)); -+ sb_setcoreidx(&si->sb, origidx); -+ return NULL; -+ } -+ } -+ -+ /* get chipcommon rev */ -+ si->sb.ccrev = cc ? (int)sb_corerev(&si->sb) : NOREV; -+ -+ /* determine numcores */ -+ if (cc && ((si->sb.ccrev == 4) || (si->sb.ccrev >= 6))) -+ si->numcores = (R_REG(si->osh, &cc->chipid) & CID_CC_MASK) >> CID_CC_SHIFT; -+ else -+ si->numcores = sb_chip2numcores(si->sb.chip); -+ -+ /* return to original core */ -+ sb_setcoreidx(&si->sb, origidx); -+ -+ /* sanity checks */ -+ ASSERT(si->sb.chip); -+ -+ /* scan for cores */ -+ sb_scan(si); -+ -+ /* fixup necessary chip/core configurations */ -+ if (BUSTYPE(si->sb.bustype) == PCI_BUS) { -+ if (sb_pci_fixcfg(si)) { -+ SB_ERROR(("sb_doattach: sb_pci_fixcfg failed\n")); -+ return NULL; -+ } -+ } -+ -+ /* srom_var_init() depends on sb_scan() info */ -+ if (srom_var_init(si, si->sb.bustype, si->curmap, si->osh, vars, varsz)) { -+ SB_ERROR(("sb_doattach: srom_var_init failed: bad srom\n")); -+ return (NULL); -+ } -+ -+ if (cc == NULL) { -+ /* -+ * The chip revision number is hardwired into all -+ * of the pci function config rev fields and is -+ * independent from the individual core revision numbers. -+ * For example, the "A0" silicon of each chip is chip rev 0. -+ * For PCMCIA we get it from the CIS instead. -+ */ -+ if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS) { -+ ASSERT(vars); -+ si->sb.chiprev = getintvar(*vars, "chiprev"); -+ } else if (BUSTYPE(si->sb.bustype) == PCI_BUS) { -+ w = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_REV, sizeof(uint32)); -+ si->sb.chiprev = w & 0xff; -+ } else -+ si->sb.chiprev = 0; -+ } -+ -+ if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS) { -+ w = getintvar(*vars, "regwindowsz"); -+ si->memseg = (w <= CFTABLE_REGWIN_2K) ? TRUE : FALSE; -+ } -+ -+ /* gpio control core is required */ -+ if (!GOODIDX(si->gpioidx)) { -+ SB_ERROR(("sb_doattach: gpio control core not found\n")); -+ return NULL; -+ } -+ -+ /* get boardtype and boardrev */ -+ switch (BUSTYPE(si->sb.bustype)) { -+ case PCI_BUS: -+ /* do a pci config read to get subsystem id and subvendor id */ -+ w = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_SVID, sizeof(uint32)); -+ si->sb.boardvendor = w & 0xffff; -+ si->sb.boardtype = (w >> 16) & 0xffff; -+ break; -+ -+ case PCMCIA_BUS: -+ case SDIO_BUS: -+ si->sb.boardvendor = getintvar(*vars, "manfid"); -+ si->sb.boardtype = getintvar(*vars, "prodid"); -+ break; -+ -+ case SB_BUS: -+ case JTAG_BUS: -+ si->sb.boardvendor = VENDOR_BROADCOM; -+ if ((si->sb.boardtype = getintvar(NULL, "boardtype")) == 0) -+ si->sb.boardtype = 0xffff; -+ break; -+ } -+ -+ if (si->sb.boardtype == 0) { -+ SB_ERROR(("sb_doattach: unknown board type\n")); -+ ASSERT(si->sb.boardtype); -+ } -+ -+ /* setup the GPIO based LED powersave register */ -+ if (si->sb.ccrev >= 16) { -+ if ((vars == NULL) || ((w = getintvar(*vars, "leddc")) == 0)) -+ w = DEFAULT_GPIOTIMERVAL; -+ sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimerval), ~0, w); -+ } -+ if (FORCEHT_WAR32414(si)) { -+ /* set proper clk setup delays before forcing HT */ -+ sb_clkctl_init((void *)si); -+ sb_war32414_forceHT((void *)si, 1); -+ } -+ -+ -+ return (si); -+} -+ -+ -+uint -+sb_coreid(sb_t *sbh) -+{ -+ sb_info_t *si; -+ sbconfig_t *sb; -+ -+ si = SB_INFO(sbh); -+ sb = REGS2SB(si->curmap); -+ -+ return ((R_SBREG(si, &sb->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT); -+} -+ -+uint -+sb_coreidx(sb_t *sbh) -+{ -+ sb_info_t *si; -+ -+ si = SB_INFO(sbh); -+ return (si->curidx); -+} -+ -+/* return current index of core */ -+static uint -+_sb_coreidx(sb_info_t *si) -+{ -+ sbconfig_t *sb; -+ uint32 sbaddr = 0; -+ -+ ASSERT(si); -+ -+ switch (BUSTYPE(si->sb.bustype)) { -+ case SB_BUS: -+ sb = REGS2SB(si->curmap); -+ sbaddr = sb_base(R_SBREG(si, &sb->sbadmatch0)); -+ break; -+ -+ case PCI_BUS: -+ sbaddr = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof(uint32)); -+ break; -+ -+ case PCMCIA_BUS: { -+ uint8 tmp = 0; -+ -+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1); -+ sbaddr = (uint)tmp << 12; -+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1); -+ sbaddr |= (uint)tmp << 16; -+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1); -+ sbaddr |= (uint)tmp << 24; -+ break; -+ } -+ -+#ifdef BCMJTAG -+ case JTAG_BUS: -+ sbaddr = (uint32)si->curmap; -+ break; -+#endif /* BCMJTAG */ -+ -+ default: -+ ASSERT(0); -+ } -+ -+ if (!GOODCOREADDR(sbaddr)) -+ return BADIDX; -+ -+ return ((sbaddr - SB_ENUM_BASE) / SB_CORE_SIZE); -+} -+ -+uint -+sb_corevendor(sb_t *sbh) -+{ -+ sb_info_t *si; -+ sbconfig_t *sb; -+ -+ si = SB_INFO(sbh); -+ sb = REGS2SB(si->curmap); -+ -+ return ((R_SBREG(si, &sb->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT); -+} -+ -+uint -+sb_corerev(sb_t *sbh) -+{ -+ sb_info_t *si; -+ sbconfig_t *sb; -+ uint sbidh; -+ -+ si = SB_INFO(sbh); -+ sb = REGS2SB(si->curmap); -+ sbidh = R_SBREG(si, &sb->sbidhigh); -+ -+ return (SBCOREREV(sbidh)); -+} -+ -+void * -+sb_osh(sb_t *sbh) -+{ -+ sb_info_t *si; -+ -+ si = SB_INFO(sbh); -+ return si->osh; -+} -+ -+void -+sb_setosh(sb_t *sbh, osl_t *osh) -+{ -+ sb_info_t *si; -+ -+ si = SB_INFO(sbh); -+ if (si->osh != NULL) { -+ SB_ERROR(("osh is already set....\n")); -+ ASSERT(!si->osh); -+ } -+ si->osh = osh; -+} -+ -+/* set/clear sbtmstatelow core-specific flags */ -+uint32 -+sb_coreflags(sb_t *sbh, uint32 mask, uint32 val) -+{ -+ sb_info_t *si; -+ sbconfig_t *sb; -+ uint32 w; -+ -+ si = SB_INFO(sbh); -+ sb = REGS2SB(si->curmap); -+ -+ ASSERT((val & ~mask) == 0); -+ -+ /* mask and set */ -+ if (mask || val) { -+ w = (R_SBREG(si, &sb->sbtmstatelow) & ~mask) | val; -+ W_SBREG(si, &sb->sbtmstatelow, w); -+ } -+ -+ /* return the new value */ -+ return (R_SBREG(si, &sb->sbtmstatelow)); -+} -+ -+/* set/clear sbtmstatehigh core-specific flags */ -+uint32 -+sb_coreflagshi(sb_t *sbh, uint32 mask, uint32 val) -+{ -+ sb_info_t *si; -+ sbconfig_t *sb; -+ uint32 w; -+ -+ si = SB_INFO(sbh); -+ sb = REGS2SB(si->curmap); -+ -+ ASSERT((val & ~mask) == 0); -+ ASSERT((mask & ~SBTMH_FL_MASK) == 0); -+ -+ /* mask and set */ -+ if (mask || val) { -+ w = (R_SBREG(si, &sb->sbtmstatehigh) & ~mask) | val; -+ W_SBREG(si, &sb->sbtmstatehigh, w); -+ } -+ -+ /* return the new value */ -+ return (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_FL_MASK); -+} -+ -+/* Run bist on current core. Caller needs to take care of core-specific bist hazards */ -+int -+sb_corebist(sb_t *sbh) -+{ -+ uint32 sblo; -+ sb_info_t *si; -+ sbconfig_t *sb; -+ int result = 0; -+ -+ si = SB_INFO(sbh); -+ sb = REGS2SB(si->curmap); -+ -+ sblo = R_SBREG(si, &sb->sbtmstatelow); -+ W_SBREG(si, &sb->sbtmstatelow, (sblo | SBTML_FGC | SBTML_BE)); -+ -+ SPINWAIT(((R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BISTD) == 0), 100000); -+ -+ if (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BISTF) -+ result = BCME_ERROR; -+ -+ W_SBREG(si, &sb->sbtmstatelow, sblo); -+ -+ return result; -+} -+ -+bool -+sb_iscoreup(sb_t *sbh) -+{ -+ sb_info_t *si; -+ sbconfig_t *sb; -+ -+ si = SB_INFO(sbh); -+ sb = REGS2SB(si->curmap); -+ -+ return ((R_SBREG(si, &sb->sbtmstatelow) & -+ (SBTML_RESET | SBTML_REJ_MASK | SBTML_CLK)) == SBTML_CLK); -+} -+ -+/* -+ * Switch to 'coreidx', issue a single arbitrary 32bit register mask&set operation, -+ * switch back to the original core, and return the new value. -+ * -+ * When using the silicon backplane, no fidleing with interrupts or core switches are needed. -+ * -+ * Also, when using pci/pcie, we can optimize away the core switching for pci registers -+ * and (on newer pci cores) chipcommon registers. -+ */ -+static uint -+sb_corereg(sb_info_t *si, uint coreidx, uint regoff, uint mask, uint val) -+{ -+ uint origidx = 0; -+ uint32 *r = NULL; -+ uint w; -+ uint intr_val = 0; -+ bool fast = FALSE; -+ -+ ASSERT(GOODIDX(coreidx)); -+ ASSERT(regoff < SB_CORE_SIZE); -+ ASSERT((val & ~mask) == 0); -+ -+#ifdef notyet -+ if (si->sb.bustype == SB_BUS) { -+ /* If internal bus, we can always get at everything */ -+ fast = TRUE; -+ r = (uint32 *)((uchar *)si->regs[coreidx] + regoff); -+ } else if (si->sb.bustype == PCI_BUS) { -+ /* If pci/pcie, we can get at pci/pcie regs and on newer cores to chipc */ -+ -+ if ((si->coreid[coreidx] == SB_CC) && -+ ((si->sb.buscoretype == SB_PCIE) || -+ (si->sb.buscorerev >= 13))) { -+ /* Chipc registers are mapped at 12KB */ -+ -+ fast = TRUE; -+ r = (uint32 *)((char *)si->curmap + PCI_16KB0_CCREGS_OFFSET + regoff); -+ } else if (si->sb.buscoreidx == coreidx) { -+ /* pci registers are at either in the last 2KB of an 8KB window -+ * or, in pcie and pci rev 13 at 8KB -+ */ -+ fast = TRUE; -+ if ((si->sb.buscoretype == SB_PCIE) || -+ (si->sb.buscorerev >= 13)) -+ r = (uint32 *)((char *)si->curmap + -+ PCI_16KB0_PCIREGS_OFFSET + regoff); -+ else -+ r = (uint32 *)((char *)si->curmap + -+ ((regoff >= SBCONFIGOFF) ? -+ PCI_BAR0_PCISBR_OFFSET : PCI_BAR0_PCIREGS_OFFSET) + -+ regoff); -+ } -+ } -+#endif /* notyet */ -+ -+ if (!fast) { -+ INTR_OFF(si, intr_val); -+ -+ /* save current core index */ -+ origidx = sb_coreidx(&si->sb); -+ -+ /* switch core */ -+ r = (uint32*) ((uchar*) sb_setcoreidx(&si->sb, coreidx) + regoff); -+ } -+ ASSERT(r); -+ -+ /* mask and set */ -+ if (mask || val) { -+ if (regoff >= SBCONFIGOFF) { -+ w = (R_SBREG(si, r) & ~mask) | val; -+ W_SBREG(si, r, w); -+ } else { -+ w = (R_REG(si->osh, r) & ~mask) | val; -+ W_REG(si->osh, r, w); -+ } -+ } -+ -+ /* readback */ -+ if (regoff >= SBCONFIGOFF) -+ w = R_SBREG(si, r); -+ else -+ w = R_REG(si->osh, r); -+ -+ if (!fast) { -+ /* restore core index */ -+ if (origidx != coreidx) -+ sb_setcoreidx(&si->sb, origidx); -+ -+ INTR_RESTORE(si, intr_val); -+ } -+ -+ return (w); -+} -+ -+#define DWORD_ALIGN(x) (x & ~(0x03)) -+#define BYTE_POS(x) (x & 0x3) -+#define WORD_POS(x) (x & 0x1) -+ -+#define BYTE_SHIFT(x) (8 * BYTE_POS(x)) -+#define WORD_SHIFT(x) (16 * WORD_POS(x)) -+ -+#define BYTE_VAL(a, x) ((a >> BYTE_SHIFT(x)) & 0xFF) -+#define WORD_VAL(a, x) ((a >> WORD_SHIFT(x)) & 0xFFFF) -+ -+#define read_pci_cfg_byte(a) \ -+ (BYTE_VAL(OSL_PCI_READ_CONFIG(si->osh, DWORD_ALIGN(a), 4), a) & 0xff) -+ -+#define read_pci_cfg_word(a) \ -+ (WORD_VAL(OSL_PCI_READ_CONFIG(si->osh, DWORD_ALIGN(a), 4), a) & 0xffff) -+ -+ -+/* return TRUE if requested capability exists in the PCI config space */ -+static bool -+sb_find_pci_capability(sb_info_t *si, uint8 req_cap_id, uchar *buf, uint32 *buflen) -+{ -+ uint8 cap_id; -+ uint8 cap_ptr; -+ uint32 bufsize; -+ uint8 byte_val; -+ -+ if (BUSTYPE(si->sb.bustype) != PCI_BUS) -+ return FALSE; -+ -+ /* check for Header type 0 */ -+ byte_val = read_pci_cfg_byte(PCI_CFG_HDR); -+ if ((byte_val & 0x7f) != PCI_HEADER_NORMAL) -+ return FALSE; -+ -+ /* check if the capability pointer field exists */ -+ byte_val = read_pci_cfg_byte(PCI_CFG_STAT); -+ if (!(byte_val & PCI_CAPPTR_PRESENT)) -+ return FALSE; -+ -+ cap_ptr = read_pci_cfg_byte(PCI_CFG_CAPPTR); -+ /* check if the capability pointer is 0x00 */ -+ if (cap_ptr == 0x00) -+ return FALSE; -+ -+ -+ /* loop thr'u the capability list and see if the pcie capabilty exists */ -+ -+ cap_id = read_pci_cfg_byte(cap_ptr); -+ -+ while (cap_id != req_cap_id) { -+ cap_ptr = read_pci_cfg_byte((cap_ptr+1)); -+ if (cap_ptr == 0x00) break; -+ cap_id = read_pci_cfg_byte(cap_ptr); -+ } -+ if (cap_id != req_cap_id) { -+ return FALSE; -+ } -+ /* found the caller requested capability */ -+ if ((buf != NULL) && (buflen != NULL)) { -+ bufsize = *buflen; -+ if (!bufsize) goto end; -+ *buflen = 0; -+ /* copy the cpability data excluding cap ID and next ptr */ -+ cap_ptr += 2; -+ if ((bufsize + cap_ptr) > SZPCR) -+ bufsize = SZPCR - cap_ptr; -+ *buflen = bufsize; -+ while (bufsize--) { -+ *buf = read_pci_cfg_byte(cap_ptr); -+ cap_ptr++; -+ buf++; -+ } -+ } -+end: -+ return TRUE; -+} -+ -+/* return TRUE if PCIE capability exists the pci config space */ -+static inline bool -+sb_ispcie(sb_info_t *si) -+{ -+ return (sb_find_pci_capability(si, PCI_CAP_PCIECAP_ID, NULL, NULL)); -+} -+ -+/* scan the sb enumerated space to identify all cores */ -+static void -+BCMINITFN(sb_scan)(sb_info_t *si) -+{ -+ uint origidx; -+ uint i; -+ bool pci; -+ bool pcie; -+ uint pciidx; -+ uint pcieidx; -+ uint pcirev; -+ uint pcierev; -+ -+ -+ /* numcores should already be set */ -+ ASSERT((si->numcores > 0) && (si->numcores <= SB_MAXCORES)); -+ -+ /* save current core index */ -+ origidx = sb_coreidx(&si->sb); -+ -+ si->sb.buscorerev = NOREV; -+ si->sb.buscoreidx = BADIDX; -+ -+ si->gpioidx = BADIDX; -+ -+ pci = pcie = FALSE; -+ pcirev = pcierev = NOREV; -+ pciidx = pcieidx = BADIDX; -+ -+ for (i = 0; i < si->numcores; i++) { -+ sb_setcoreidx(&si->sb, i); -+ si->coreid[i] = sb_coreid(&si->sb); -+ -+ if (si->coreid[i] == SB_PCI) { -+ pciidx = i; -+ pcirev = sb_corerev(&si->sb); -+ pci = TRUE; -+ } else if (si->coreid[i] == SB_PCIE) { -+ pcieidx = i; -+ pcierev = sb_corerev(&si->sb); -+ pcie = TRUE; -+ } else if (si->coreid[i] == SB_PCMCIA) { -+ si->sb.buscorerev = sb_corerev(&si->sb); -+ si->sb.buscoretype = si->coreid[i]; -+ si->sb.buscoreidx = i; -+ } -+ } -+ if (pci && pcie) { -+ if (sb_ispcie(si)) -+ pci = FALSE; -+ else -+ pcie = FALSE; -+ } -+ if (pci) { -+ si->sb.buscoretype = SB_PCI; -+ si->sb.buscorerev = pcirev; -+ si->sb.buscoreidx = pciidx; -+ } else if (pcie) { -+ si->sb.buscoretype = SB_PCIE; -+ si->sb.buscorerev = pcierev; -+ si->sb.buscoreidx = pcieidx; -+ } -+ -+ /* -+ * Find the gpio "controlling core" type and index. -+ * Precedence: -+ * - if there's a chip common core - use that -+ * - else if there's a pci core (rev >= 2) - use that -+ * - else there had better be an extif core (4710 only) -+ */ -+ if (GOODIDX(sb_findcoreidx(si, SB_CC, 0))) { -+ si->gpioidx = sb_findcoreidx(si, SB_CC, 0); -+ si->gpioid = SB_CC; -+ } else if (PCI(si) && (si->sb.buscorerev >= 2)) { -+ si->gpioidx = si->sb.buscoreidx; -+ si->gpioid = SB_PCI; -+ } else if (sb_findcoreidx(si, SB_EXTIF, 0)) { -+ si->gpioidx = sb_findcoreidx(si, SB_EXTIF, 0); -+ si->gpioid = SB_EXTIF; -+ } else -+ ASSERT(si->gpioidx != BADIDX); -+ -+ /* return to original core index */ -+ sb_setcoreidx(&si->sb, origidx); -+} -+ -+/* may be called with core in reset */ -+void -+sb_detach(sb_t *sbh) -+{ -+ sb_info_t *si; -+ uint idx; -+ -+ si = SB_INFO(sbh); -+ -+ if (si == NULL) -+ return; -+ -+ if (BUSTYPE(si->sb.bustype) == SB_BUS) -+ for (idx = 0; idx < SB_MAXCORES; idx++) -+ if (si->regs[idx]) { -+ REG_UNMAP(si->regs[idx]); -+ si->regs[idx] = NULL; -+ } -+#if !defined(BCMBUSTYPE) || (BCMBUSTYPE == SB_BUS) -+ if (si != &ksi) -+#endif /* !BCMBUSTYPE || (BCMBUSTYPE == SB_BUS) */ -+ MFREE(si->osh, si, sizeof(sb_info_t)); -+ -+} -+ -+/* use pci dev id to determine chip id for chips not having a chipcommon core */ -+static uint -+BCMINITFN(sb_pcidev2chip)(uint pcidev) -+{ -+ if ((pcidev >= BCM4710_DEVICE_ID) && (pcidev <= BCM47XX_USB_ID)) -+ return (BCM4710_CHIP_ID); -+ if ((pcidev >= BCM4402_ENET_ID) && (pcidev <= BCM4402_V90_ID)) -+ return (BCM4402_CHIP_ID); -+ if (pcidev == BCM4401_ENET_ID) -+ return (BCM4402_CHIP_ID); -+ -+ return (0); -+} -+ -+/* convert chip number to number of i/o cores */ -+static uint -+BCMINITFN(sb_chip2numcores)(uint chip) -+{ -+ if (chip == BCM4710_CHIP_ID) -+ return (9); -+ if (chip == BCM4402_CHIP_ID) -+ return (3); -+ if (chip == BCM4306_CHIP_ID) /* < 4306c0 */ -+ return (6); -+ if (chip == BCM4704_CHIP_ID) -+ return (9); -+ if (chip == BCM5365_CHIP_ID) -+ return (7); -+ -+ SB_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", chip)); -+ ASSERT(0); -+ return (1); -+} -+ -+/* return index of coreid or BADIDX if not found */ -+static uint -+sb_findcoreidx(sb_info_t *si, uint coreid, uint coreunit) -+{ -+ uint found; -+ uint i; -+ -+ found = 0; -+ -+ for (i = 0; i < si->numcores; i++) -+ if (si->coreid[i] == coreid) { -+ if (found == coreunit) -+ return (i); -+ found++; -+ } -+ -+ return (BADIDX); -+} -+ -+/* -+ * this function changes logical "focus" to the indiciated core, -+ * must be called with interrupt off. -+ * Moreover, callers should keep interrupts off during switching out of and back to d11 core -+ */ -+void* -+sb_setcoreidx(sb_t *sbh, uint coreidx) -+{ -+ sb_info_t *si; -+ uint32 sbaddr; -+ uint8 tmp; -+ -+ si = SB_INFO(sbh); -+ -+ if (coreidx >= si->numcores) -+ return (NULL); -+ -+ /* -+ * If the user has provided an interrupt mask enabled function, -+ * then assert interrupts are disabled before switching the core. -+ */ -+ ASSERT((si->intrsenabled_fn == NULL) || !(*(si)->intrsenabled_fn)((si)->intr_arg)); -+ -+ sbaddr = SB_ENUM_BASE + (coreidx * SB_CORE_SIZE); -+ -+ switch (BUSTYPE(si->sb.bustype)) { -+ case SB_BUS: -+ /* map new one */ -+ if (!si->regs[coreidx]) { -+ si->regs[coreidx] = (void*)REG_MAP(sbaddr, SB_CORE_SIZE); -+ ASSERT(GOODREGS(si->regs[coreidx])); -+ } -+ si->curmap = si->regs[coreidx]; -+ break; -+ -+ case PCI_BUS: -+ /* point bar0 window */ -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, 4, sbaddr); -+ break; -+ -+ case PCMCIA_BUS: -+ tmp = (sbaddr >> 12) & 0x0f; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1); -+ tmp = (sbaddr >> 16) & 0xff; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1); -+ tmp = (sbaddr >> 24) & 0xff; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1); -+ break; -+#ifdef BCMJTAG -+ case JTAG_BUS: -+ /* map new one */ -+ if (!si->regs[coreidx]) { -+ si->regs[coreidx] = (void *)sbaddr; -+ ASSERT(GOODREGS(si->regs[coreidx])); -+ } -+ si->curmap = si->regs[coreidx]; -+ break; -+#endif /* BCMJTAG */ -+ } -+ -+ si->curidx = coreidx; -+ -+ return (si->curmap); -+} -+ -+/* -+ * this function changes logical "focus" to the indiciated core, -+ * must be called with interrupt off. -+ * Moreover, callers should keep interrupts off during switching out of and back to d11 core -+ */ -+void* -+sb_setcore(sb_t *sbh, uint coreid, uint coreunit) -+{ -+ sb_info_t *si; -+ uint idx; -+ -+ si = SB_INFO(sbh); -+ idx = sb_findcoreidx(si, coreid, coreunit); -+ if (!GOODIDX(idx)) -+ return (NULL); -+ -+ return (sb_setcoreidx(sbh, idx)); -+} -+ -+/* return chip number */ -+uint -+sb_chip(sb_t *sbh) -+{ -+ sb_info_t *si; -+ -+ si = SB_INFO(sbh); -+ return (si->sb.chip); -+} -+ -+/* return chip revision number */ -+uint -+sb_chiprev(sb_t *sbh) -+{ -+ sb_info_t *si; -+ -+ si = SB_INFO(sbh); -+ return (si->sb.chiprev); -+} -+ -+/* return chip common revision number */ -+uint -+sb_chipcrev(sb_t *sbh) -+{ -+ sb_info_t *si; -+ -+ si = SB_INFO(sbh); -+ return (si->sb.ccrev); -+} -+ -+/* return chip package option */ -+uint -+sb_chippkg(sb_t *sbh) -+{ -+ sb_info_t *si; -+ -+ si = SB_INFO(sbh); -+ return (si->sb.chippkg); -+} -+ -+/* return PCI core rev. */ -+uint -+sb_pcirev(sb_t *sbh) -+{ -+ sb_info_t *si; -+ -+ si = SB_INFO(sbh); -+ return (si->sb.buscorerev); -+} -+ -+bool -+BCMINITFN(sb_war16165)(sb_t *sbh) -+{ -+ sb_info_t *si; -+ -+ si = SB_INFO(sbh); -+ -+ return (PCI(si) && (si->sb.buscorerev <= 10)); -+} -+ -+static void -+BCMINITFN(sb_war30841)(sb_info_t *si) -+{ -+ sb_pcie_mdiowrite(si, MDIODATA_DEV_RX, SERDES_RX_TIMER1, 0x8128); -+ sb_pcie_mdiowrite(si, MDIODATA_DEV_RX, SERDES_RX_CDR, 0x0100); -+ sb_pcie_mdiowrite(si, MDIODATA_DEV_RX, SERDES_RX_CDRBW, 0x1466); -+} -+ -+/* return PCMCIA core rev. */ -+uint -+BCMINITFN(sb_pcmciarev)(sb_t *sbh) -+{ -+ sb_info_t *si; -+ -+ si = SB_INFO(sbh); -+ return (si->sb.buscorerev); -+} -+ -+/* return board vendor id */ -+uint -+sb_boardvendor(sb_t *sbh) -+{ -+ sb_info_t *si; -+ -+ si = SB_INFO(sbh); -+ return (si->sb.boardvendor); -+} -+ -+/* return boardtype */ -+uint -+sb_boardtype(sb_t *sbh) -+{ -+ sb_info_t *si; -+ char *var; -+ -+ si = SB_INFO(sbh); -+ -+ if (BUSTYPE(si->sb.bustype) == SB_BUS && si->sb.boardtype == 0xffff) { -+ /* boardtype format is a hex string */ -+ si->sb.boardtype = getintvar(NULL, "boardtype"); -+ -+ /* backward compatibility for older boardtype string format */ -+ if ((si->sb.boardtype == 0) && (var = getvar(NULL, "boardtype"))) { -+ if (!strcmp(var, "bcm94710dev")) -+ si->sb.boardtype = BCM94710D_BOARD; -+ else if (!strcmp(var, "bcm94710ap")) -+ si->sb.boardtype = BCM94710AP_BOARD; -+ else if (!strcmp(var, "bu4710")) -+ si->sb.boardtype = BU4710_BOARD; -+ else if (!strcmp(var, "bcm94702mn")) -+ si->sb.boardtype = BCM94702MN_BOARD; -+ else if (!strcmp(var, "bcm94710r1")) -+ si->sb.boardtype = BCM94710R1_BOARD; -+ else if (!strcmp(var, "bcm94710r4")) -+ si->sb.boardtype = BCM94710R4_BOARD; -+ else if (!strcmp(var, "bcm94702cpci")) -+ si->sb.boardtype = BCM94702CPCI_BOARD; -+ else if (!strcmp(var, "bcm95380_rr")) -+ si->sb.boardtype = BCM95380RR_BOARD; -+ } -+ } -+ -+ return (si->sb.boardtype); -+} -+ -+/* return bus type of sbh device */ -+uint -+sb_bus(sb_t *sbh) -+{ -+ sb_info_t *si; -+ -+ si = SB_INFO(sbh); -+ return (si->sb.bustype); -+} -+ -+/* return bus core type */ -+uint -+sb_buscoretype(sb_t *sbh) -+{ -+ sb_info_t *si; -+ -+ si = SB_INFO(sbh); -+ -+ return (si->sb.buscoretype); -+} -+ -+/* return bus core revision */ -+uint -+sb_buscorerev(sb_t *sbh) -+{ -+ sb_info_t *si; -+ si = SB_INFO(sbh); -+ -+ return (si->sb.buscorerev); -+} -+ -+/* return list of found cores */ -+uint -+sb_corelist(sb_t *sbh, uint coreid[]) -+{ -+ sb_info_t *si; -+ -+ si = SB_INFO(sbh); -+ -+ bcopy((uchar*)si->coreid, (uchar*)coreid, (si->numcores * sizeof(uint))); -+ return (si->numcores); -+} -+ -+/* return current register mapping */ -+void * -+sb_coreregs(sb_t *sbh) -+{ -+ sb_info_t *si; -+ -+ si = SB_INFO(sbh); -+ ASSERT(GOODREGS(si->curmap)); -+ -+ return (si->curmap); -+} -+ -+ -+/* do buffered registers update */ -+void -+sb_commit(sb_t *sbh) -+{ -+ sb_info_t *si; -+ uint origidx; -+ uint intr_val = 0; -+ -+ si = SB_INFO(sbh); -+ -+ origidx = si->curidx; -+ ASSERT(GOODIDX(origidx)); -+ -+ INTR_OFF(si, intr_val); -+ -+ /* switch over to chipcommon core if there is one, else use pci */ -+ if (si->sb.ccrev != NOREV) { -+ chipcregs_t *ccregs = (chipcregs_t *)sb_setcore(sbh, SB_CC, 0); -+ -+ /* do the buffer registers update */ -+ W_REG(si->osh, &ccregs->broadcastaddress, SB_COMMIT); -+ W_REG(si->osh, &ccregs->broadcastdata, 0x0); -+ } else if (PCI(si)) { -+ sbpciregs_t *pciregs = (sbpciregs_t *)sb_setcore(sbh, SB_PCI, 0); -+ -+ /* do the buffer registers update */ -+ W_REG(si->osh, &pciregs->bcastaddr, SB_COMMIT); -+ W_REG(si->osh, &pciregs->bcastdata, 0x0); -+ } else -+ ASSERT(0); -+ -+ /* restore core index */ -+ sb_setcoreidx(sbh, origidx); -+ INTR_RESTORE(si, intr_val); -+} -+ -+/* reset and re-enable a core -+ * inputs: -+ * bits - core specific bits that are set during and after reset sequence -+ * resetbits - core specific bits that are set only during reset sequence -+ */ -+void -+sb_core_reset(sb_t *sbh, uint32 bits, uint32 resetbits) -+{ -+ sb_info_t *si; -+ sbconfig_t *sb; -+ volatile uint32 dummy; -+ -+ si = SB_INFO(sbh); -+ ASSERT(GOODREGS(si->curmap)); -+ sb = REGS2SB(si->curmap); -+ -+ /* -+ * Must do the disable sequence first to work for arbitrary current core state. -+ */ -+ sb_core_disable(sbh, (bits | resetbits)); -+ -+ /* -+ * Now do the initialization sequence. -+ */ -+ -+ /* set reset while enabling the clock and forcing them on throughout the core */ -+ W_SBREG(si, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | SBTML_RESET | bits | resetbits)); -+ dummy = R_SBREG(si, &sb->sbtmstatelow); -+ OSL_DELAY(1); -+ -+ if (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_SERR) { -+ W_SBREG(si, &sb->sbtmstatehigh, 0); -+ } -+ if ((dummy = R_SBREG(si, &sb->sbimstate)) & (SBIM_IBE | SBIM_TO)) { -+ AND_SBREG(si, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO)); -+ } -+ -+ /* clear reset and allow it to propagate throughout the core */ -+ W_SBREG(si, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | bits)); -+ dummy = R_SBREG(si, &sb->sbtmstatelow); -+ OSL_DELAY(1); -+ -+ /* leave clock enabled */ -+ W_SBREG(si, &sb->sbtmstatelow, (SBTML_CLK | bits)); -+ dummy = R_SBREG(si, &sb->sbtmstatelow); -+ OSL_DELAY(1); -+} -+ -+void -+sb_core_tofixup(sb_t *sbh) -+{ -+ sb_info_t *si; -+ sbconfig_t *sb; -+ -+ si = SB_INFO(sbh); -+ -+ if ((BUSTYPE(si->sb.bustype) != PCI_BUS) || PCIE(si) || -+ (PCI(si) && (si->sb.buscorerev >= 5))) -+ return; -+ -+ ASSERT(GOODREGS(si->curmap)); -+ sb = REGS2SB(si->curmap); -+ -+ if (BUSTYPE(si->sb.bustype) == SB_BUS) { -+ SET_SBREG(si, &sb->sbimconfiglow, -+ SBIMCL_RTO_MASK | SBIMCL_STO_MASK, -+ (0x5 << SBIMCL_RTO_SHIFT) | 0x3); -+ } else { -+ if (sb_coreid(sbh) == SB_PCI) { -+ SET_SBREG(si, &sb->sbimconfiglow, -+ SBIMCL_RTO_MASK | SBIMCL_STO_MASK, -+ (0x3 << SBIMCL_RTO_SHIFT) | 0x2); -+ } else { -+ SET_SBREG(si, &sb->sbimconfiglow, (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0); -+ } -+ } -+ -+ sb_commit(sbh); -+} -+ -+/* -+ * Set the initiator timeout for the "master core". -+ * The master core is defined to be the core in control -+ * of the chip and so it issues accesses to non-memory -+ * locations (Because of dma *any* core can access memeory). -+ * -+ * The routine uses the bus to decide who is the master: -+ * SB_BUS => mips -+ * JTAG_BUS => chipc -+ * PCI_BUS => pci or pcie -+ * PCMCIA_BUS => pcmcia -+ * SDIO_BUS => pcmcia -+ * -+ * This routine exists so callers can disable initiator -+ * timeouts so accesses to very slow devices like otp -+ * won't cause an abort. The routine allows arbitrary -+ * settings of the service and request timeouts, though. -+ * -+ * Returns the timeout state before changing it or -1 -+ * on error. -+ */ -+ -+#define TO_MASK (SBIMCL_RTO_MASK | SBIMCL_STO_MASK) -+ -+uint32 -+sb_set_initiator_to(sb_t *sbh, uint32 to) -+{ -+ sb_info_t *si; -+ uint origidx, idx; -+ uint intr_val = 0; -+ uint32 tmp, ret = 0xffffffff; -+ sbconfig_t *sb; -+ -+ si = SB_INFO(sbh); -+ -+ if ((to & ~TO_MASK) != 0) -+ return ret; -+ -+ /* Figure out the master core */ -+ idx = BADIDX; -+ switch (BUSTYPE(si->sb.bustype)) { -+ case PCI_BUS: -+ idx = si->sb.buscoreidx; -+ break; -+ case JTAG_BUS: -+ idx = SB_CC_IDX; -+ break; -+ case PCMCIA_BUS: -+ case SDIO_BUS: -+ idx = sb_findcoreidx(si, SB_PCMCIA, 0); -+ break; -+ case SB_BUS: -+ if ((idx = sb_findcoreidx(si, SB_MIPS33, 0)) == BADIDX) -+ idx = sb_findcoreidx(si, SB_MIPS, 0); -+ break; -+ default: -+ ASSERT(0); -+ } -+ if (idx == BADIDX) -+ return ret; -+ -+ INTR_OFF(si, intr_val); -+ origidx = sb_coreidx(sbh); -+ -+ sb = REGS2SB(sb_setcoreidx(sbh, idx)); -+ -+ tmp = R_SBREG(si, &sb->sbimconfiglow); -+ ret = tmp & TO_MASK; -+ W_SBREG(si, &sb->sbimconfiglow, (tmp & ~TO_MASK) | to); -+ -+ sb_commit(sbh); -+ sb_setcoreidx(sbh, origidx); -+ INTR_RESTORE(si, intr_val); -+ return ret; -+} -+ -+void -+sb_core_disable(sb_t *sbh, uint32 bits) -+{ -+ sb_info_t *si; -+ volatile uint32 dummy; -+ uint32 rej; -+ sbconfig_t *sb; -+ -+ si = SB_INFO(sbh); -+ -+ ASSERT(GOODREGS(si->curmap)); -+ sb = REGS2SB(si->curmap); -+ -+ /* if core is already in reset, just return */ -+ if (R_SBREG(si, &sb->sbtmstatelow) & SBTML_RESET) -+ return; -+ -+ /* reject value changed between sonics 2.2 and 2.3 */ -+ if (si->sb.sonicsrev == SONICS_2_2) -+ rej = (1 << SBTML_REJ_SHIFT); -+ else -+ rej = (2 << SBTML_REJ_SHIFT); -+ -+ /* if clocks are not enabled, put into reset and return */ -+ if ((R_SBREG(si, &sb->sbtmstatelow) & SBTML_CLK) == 0) -+ goto disable; -+ -+ /* set target reject and spin until busy is clear (preserve core-specific bits) */ -+ OR_SBREG(si, &sb->sbtmstatelow, rej); -+ dummy = R_SBREG(si, &sb->sbtmstatelow); -+ OSL_DELAY(1); -+ SPINWAIT((R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BUSY), 100000); -+ if (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BUSY) -+ SB_ERROR(("%s: target state still busy\n", __FUNCTION__)); -+ -+ if (R_SBREG(si, &sb->sbidlow) & SBIDL_INIT) { -+ OR_SBREG(si, &sb->sbimstate, SBIM_RJ); -+ dummy = R_SBREG(si, &sb->sbimstate); -+ OSL_DELAY(1); -+ SPINWAIT((R_SBREG(si, &sb->sbimstate) & SBIM_BY), 100000); -+ } -+ -+ /* set reset and reject while enabling the clocks */ -+ W_SBREG(si, &sb->sbtmstatelow, (bits | SBTML_FGC | SBTML_CLK | rej | SBTML_RESET)); -+ dummy = R_SBREG(si, &sb->sbtmstatelow); -+ OSL_DELAY(10); -+ -+ /* don't forget to clear the initiator reject bit */ -+ if (R_SBREG(si, &sb->sbidlow) & SBIDL_INIT) -+ AND_SBREG(si, &sb->sbimstate, ~SBIM_RJ); -+ -+disable: -+ /* leave reset and reject asserted */ -+ W_SBREG(si, &sb->sbtmstatelow, (bits | rej | SBTML_RESET)); -+ OSL_DELAY(1); -+} -+ -+/* set chip watchdog reset timer to fire in 'ticks' backplane cycles */ -+void -+sb_watchdog(sb_t *sbh, uint ticks) -+{ -+ sb_info_t *si = SB_INFO(sbh); -+ -+ /* make sure we come up in fast clock mode */ -+ sb_clkctl_clk(sbh, CLK_FAST); -+ -+ /* instant NMI */ -+ switch (si->gpioid) { -+ case SB_CC: -+#ifdef __mips__ -+ if (sb_chip(sbh) == BCM4785_CHIP_ID && ticks <= 1) -+ MTC0(C0_BROADCOM, 4, (1 << 22)); -+#endif /* __mips__ */ -+ sb_corereg(si, 0, OFFSETOF(chipcregs_t, watchdog), ~0, ticks); -+#ifdef __mips__ -+ if (sb_chip(sbh) == BCM4785_CHIP_ID && ticks <= 1) { -+ __asm__ __volatile__ ( -+ ".set\tmips3\n\t" -+ "sync\n\t" -+ "wait\n\t" -+ ".set\tmips0" -+ ); -+ while (1); -+ } -+#endif /* __mips__ */ -+ break; -+ case SB_EXTIF: -+ sb_corereg(si, si->gpioidx, OFFSETOF(extifregs_t, watchdog), ~0, ticks); -+ break; -+ } -+} -+ -+/* initialize the pcmcia core */ -+void -+sb_pcmcia_init(sb_t *sbh) -+{ -+ sb_info_t *si; -+ uint8 cor = 0; -+ -+ si = SB_INFO(sbh); -+ -+ /* enable d11 mac interrupts */ -+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1); -+ cor |= COR_IRQEN | COR_FUNEN; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1); -+ -+} -+ -+ -+/* -+ * Configure the pci core for pci client (NIC) action -+ * coremask is the bitvec of cores by index to be enabled. -+ */ -+void -+BCMINITFN(sb_pci_setup)(sb_t *sbh, uint coremask) -+{ -+ sb_info_t *si; -+ sbconfig_t *sb; -+ sbpciregs_t *pciregs; -+ uint32 sbflag; -+ uint32 w; -+ uint idx; -+ int reg_val; -+ -+ si = SB_INFO(sbh); -+ -+ /* if not pci bus, we're done */ -+ if (BUSTYPE(si->sb.bustype) != PCI_BUS) -+ return; -+ -+ ASSERT(PCI(si) || PCIE(si)); -+ ASSERT(si->sb.buscoreidx != BADIDX); -+ -+ /* get current core index */ -+ idx = si->curidx; -+ -+ /* we interrupt on this backplane flag number */ -+ ASSERT(GOODREGS(si->curmap)); -+ sb = REGS2SB(si->curmap); -+ sbflag = R_SBREG(si, &sb->sbtpsflag) & SBTPS_NUM0_MASK; -+ -+ /* switch over to pci core */ -+ pciregs = (sbpciregs_t*) sb_setcoreidx(sbh, si->sb.buscoreidx); -+ sb = REGS2SB(pciregs); -+ -+ /* -+ * Enable sb->pci interrupts. Assume -+ * PCI rev 2.3 support was added in pci core rev 6 and things changed.. -+ */ -+ if (PCIE(si) || (PCI(si) && ((si->sb.buscorerev) >= 6))) { -+ /* pci config write to set this core bit in PCIIntMask */ -+ w = OSL_PCI_READ_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32)); -+ w |= (coremask << PCI_SBIM_SHIFT); -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32), w); -+ } else { -+ /* set sbintvec bit for our flag number */ -+ OR_SBREG(si, &sb->sbintvec, (1 << sbflag)); -+ } -+ -+ if (PCI(si)) { -+ OR_REG(si->osh, &pciregs->sbtopci2, (SBTOPCI_PREF|SBTOPCI_BURST)); -+ if (si->sb.buscorerev >= 11) -+ OR_REG(si->osh, &pciregs->sbtopci2, SBTOPCI_RC_READMULTI); -+ if (si->sb.buscorerev < 5) { -+ SET_SBREG(si, &sb->sbimconfiglow, SBIMCL_RTO_MASK | SBIMCL_STO_MASK, -+ (0x3 << SBIMCL_RTO_SHIFT) | 0x2); -+ sb_commit(sbh); -+ } -+ } -+ -+#ifdef PCIE_SUPPOER -+ /* PCIE workarounds */ -+ if (PCIE(si)) { -+ if ((si->sb.buscorerev == 0) || (si->sb.buscorerev == 1)) { -+ reg_val = sb_pcie_readreg((void *)sbh, (void *)PCIE_PCIEREGS, -+ PCIE_TLP_WORKAROUNDSREG); -+ reg_val |= 0x8; -+ sb_pcie_writereg((void *)sbh, (void *)PCIE_PCIEREGS, -+ PCIE_TLP_WORKAROUNDSREG, reg_val); -+ } -+ -+ if (si->sb.buscorerev == 1) { -+ reg_val = sb_pcie_readreg((void *)sbh, (void *)PCIE_PCIEREGS, -+ PCIE_DLLP_LCREG); -+ reg_val |= (0x40); -+ sb_pcie_writereg(sbh, (void *)PCIE_PCIEREGS, PCIE_DLLP_LCREG, reg_val); -+ } -+ -+ if (si->sb.buscorerev == 0) -+ sb_war30841(si); -+ } -+#endif -+ -+ /* switch back to previous core */ -+ sb_setcoreidx(sbh, idx); -+} -+ -+uint32 -+sb_base(uint32 admatch) -+{ -+ uint32 base; -+ uint type; -+ -+ type = admatch & SBAM_TYPE_MASK; -+ ASSERT(type < 3); -+ -+ base = 0; -+ -+ if (type == 0) { -+ base = admatch & SBAM_BASE0_MASK; -+ } else if (type == 1) { -+ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ -+ base = admatch & SBAM_BASE1_MASK; -+ } else if (type == 2) { -+ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ -+ base = admatch & SBAM_BASE2_MASK; -+ } -+ -+ return (base); -+} -+ -+uint32 -+sb_size(uint32 admatch) -+{ -+ uint32 size; -+ uint type; -+ -+ type = admatch & SBAM_TYPE_MASK; -+ ASSERT(type < 3); -+ -+ size = 0; -+ -+ if (type == 0) { -+ size = 1 << (((admatch & SBAM_ADINT0_MASK) >> SBAM_ADINT0_SHIFT) + 1); -+ } else if (type == 1) { -+ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ -+ size = 1 << (((admatch & SBAM_ADINT1_MASK) >> SBAM_ADINT1_SHIFT) + 1); -+ } else if (type == 2) { -+ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ -+ size = 1 << (((admatch & SBAM_ADINT2_MASK) >> SBAM_ADINT2_SHIFT) + 1); -+ } -+ -+ return (size); -+} -+ -+/* return the core-type instantiation # of the current core */ -+uint -+sb_coreunit(sb_t *sbh) -+{ -+ sb_info_t *si; -+ uint idx; -+ uint coreid; -+ uint coreunit; -+ uint i; -+ -+ si = SB_INFO(sbh); -+ coreunit = 0; -+ -+ idx = si->curidx; -+ -+ ASSERT(GOODREGS(si->curmap)); -+ coreid = sb_coreid(sbh); -+ -+ /* count the cores of our type */ -+ for (i = 0; i < idx; i++) -+ if (si->coreid[i] == coreid) -+ coreunit++; -+ -+ return (coreunit); -+} -+ -+static INLINE uint32 -+factor6(uint32 x) -+{ -+ switch (x) { -+ case CC_F6_2: return 2; -+ case CC_F6_3: return 3; -+ case CC_F6_4: return 4; -+ case CC_F6_5: return 5; -+ case CC_F6_6: return 6; -+ case CC_F6_7: return 7; -+ default: return 0; -+ } -+} -+ -+/* calculate the speed the SB would run at given a set of clockcontrol values */ -+uint32 -+sb_clock_rate(uint32 pll_type, uint32 n, uint32 m) -+{ -+ uint32 n1, n2, clock, m1, m2, m3, mc; -+ -+ n1 = n & CN_N1_MASK; -+ n2 = (n & CN_N2_MASK) >> CN_N2_SHIFT; -+ -+ if (pll_type == PLL_TYPE6) { -+ if (m & CC_T6_MMASK) -+ return CC_T6_M1; -+ else -+ return CC_T6_M0; -+ } else if ((pll_type == PLL_TYPE1) || -+ (pll_type == PLL_TYPE3) || -+ (pll_type == PLL_TYPE4) || -+ (pll_type == PLL_TYPE7)) { -+ n1 = factor6(n1); -+ n2 += CC_F5_BIAS; -+ } else if (pll_type == PLL_TYPE2) { -+ n1 += CC_T2_BIAS; -+ n2 += CC_T2_BIAS; -+ ASSERT((n1 >= 2) && (n1 <= 7)); -+ ASSERT((n2 >= 5) && (n2 <= 23)); -+ } else if (pll_type == PLL_TYPE5) { -+ return (100000000); -+ } else -+ ASSERT(0); -+ /* PLL types 3 and 7 use BASE2 (25Mhz) */ -+ if ((pll_type == PLL_TYPE3) || -+ (pll_type == PLL_TYPE7)) { -+ clock = CC_CLOCK_BASE2 * n1 * n2; -+ } else -+ clock = CC_CLOCK_BASE1 * n1 * n2; -+ -+ if (clock == 0) -+ return 0; -+ -+ m1 = m & CC_M1_MASK; -+ m2 = (m & CC_M2_MASK) >> CC_M2_SHIFT; -+ m3 = (m & CC_M3_MASK) >> CC_M3_SHIFT; -+ mc = (m & CC_MC_MASK) >> CC_MC_SHIFT; -+ -+ if ((pll_type == PLL_TYPE1) || -+ (pll_type == PLL_TYPE3) || -+ (pll_type == PLL_TYPE4) || -+ (pll_type == PLL_TYPE7)) { -+ m1 = factor6(m1); -+ if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE3)) -+ m2 += CC_F5_BIAS; -+ else -+ m2 = factor6(m2); -+ m3 = factor6(m3); -+ -+ switch (mc) { -+ case CC_MC_BYPASS: return (clock); -+ case CC_MC_M1: return (clock / m1); -+ case CC_MC_M1M2: return (clock / (m1 * m2)); -+ case CC_MC_M1M2M3: return (clock / (m1 * m2 * m3)); -+ case CC_MC_M1M3: return (clock / (m1 * m3)); -+ default: return (0); -+ } -+ } else { -+ ASSERT(pll_type == PLL_TYPE2); -+ -+ m1 += CC_T2_BIAS; -+ m2 += CC_T2M2_BIAS; -+ m3 += CC_T2_BIAS; -+ ASSERT((m1 >= 2) && (m1 <= 7)); -+ ASSERT((m2 >= 3) && (m2 <= 10)); -+ ASSERT((m3 >= 2) && (m3 <= 7)); -+ -+ if ((mc & CC_T2MC_M1BYP) == 0) -+ clock /= m1; -+ if ((mc & CC_T2MC_M2BYP) == 0) -+ clock /= m2; -+ if ((mc & CC_T2MC_M3BYP) == 0) -+ clock /= m3; -+ -+ return (clock); -+ } -+} -+ -+/* returns the current speed the SB is running at */ -+uint32 -+sb_clock(sb_t *sbh) -+{ -+ sb_info_t *si; -+ extifregs_t *eir; -+ chipcregs_t *cc; -+ uint32 n, m; -+ uint idx; -+ uint32 pll_type, rate; -+ uint intr_val = 0; -+ -+ si = SB_INFO(sbh); -+ idx = si->curidx; -+ pll_type = PLL_TYPE1; -+ -+ INTR_OFF(si, intr_val); -+ -+ /* switch to extif or chipc core */ -+ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { -+ n = R_REG(si->osh, &eir->clockcontrol_n); -+ m = R_REG(si->osh, &eir->clockcontrol_sb); -+ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { -+ pll_type = R_REG(si->osh, &cc->capabilities) & CAP_PLL_MASK; -+ if (pll_type == PLL_NONE) { -+ INTR_RESTORE(si, intr_val); -+ return 80000000; -+ } -+ n = R_REG(si->osh, &cc->clockcontrol_n); -+ if (pll_type == PLL_TYPE6) -+ m = R_REG(si->osh, &cc->clockcontrol_m3); -+ else if ((pll_type == PLL_TYPE3) && !(BCMINIT(sb_chip)(sbh) == 0x5365)) -+ m = R_REG(si->osh, &cc->clockcontrol_m2); -+ else -+ m = R_REG(si->osh, &cc->clockcontrol_sb); -+ } else { -+ INTR_RESTORE(si, intr_val); -+ return 0; -+ } -+ -+ /* calculate rate */ -+ if (BCMINIT(sb_chip)(sbh) == 0x5365) -+ rate = 100000000; -+ else { -+ rate = sb_clock_rate(pll_type, n, m); -+ -+ if (pll_type == PLL_TYPE3) -+ rate = rate / 2; -+ } -+ -+ /* switch back to previous core */ -+ sb_setcoreidx(sbh, idx); -+ -+ INTR_RESTORE(si, intr_val); -+ -+ return rate; -+} -+ -+/* change logical "focus" to the gpio core for optimized access */ -+void* -+sb_gpiosetcore(sb_t *sbh) -+{ -+ sb_info_t *si; -+ -+ si = SB_INFO(sbh); -+ -+ return (sb_setcoreidx(sbh, si->gpioidx)); -+} -+ -+/* mask&set gpiocontrol bits */ -+uint32 -+sb_gpiocontrol(sb_t *sbh, uint32 mask, uint32 val, uint8 priority) -+{ -+ sb_info_t *si; -+ uint regoff; -+ -+ si = SB_INFO(sbh); -+ regoff = 0; -+ -+ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ -+ -+ /* gpios could be shared on router platforms */ -+ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) { -+ mask = priority ? (sb_gpioreservation & mask) : -+ ((sb_gpioreservation | mask) & ~(sb_gpioreservation)); -+ val &= mask; -+ } -+ -+ switch (si->gpioid) { -+ case SB_CC: -+ regoff = OFFSETOF(chipcregs_t, gpiocontrol); -+ break; -+ -+ case SB_PCI: -+ regoff = OFFSETOF(sbpciregs_t, gpiocontrol); -+ break; -+ -+ case SB_EXTIF: -+ return (0); -+ } -+ -+ return (sb_corereg(si, si->gpioidx, regoff, mask, val)); -+} -+ -+/* mask&set gpio output enable bits */ -+uint32 -+sb_gpioouten(sb_t *sbh, uint32 mask, uint32 val, uint8 priority) -+{ -+ sb_info_t *si; -+ uint regoff; -+ -+ si = SB_INFO(sbh); -+ regoff = 0; -+ -+ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ -+ -+ /* gpios could be shared on router platforms */ -+ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) { -+ mask = priority ? (sb_gpioreservation & mask) : -+ ((sb_gpioreservation | mask) & ~(sb_gpioreservation)); -+ val &= mask; -+ } -+ -+ switch (si->gpioid) { -+ case SB_CC: -+ regoff = OFFSETOF(chipcregs_t, gpioouten); -+ break; -+ -+ case SB_PCI: -+ regoff = OFFSETOF(sbpciregs_t, gpioouten); -+ break; -+ -+ case SB_EXTIF: -+ regoff = OFFSETOF(extifregs_t, gpio[0].outen); -+ break; -+ } -+ -+ return (sb_corereg(si, si->gpioidx, regoff, mask, val)); -+} -+ -+/* mask&set gpio output bits */ -+uint32 -+sb_gpioout(sb_t *sbh, uint32 mask, uint32 val, uint8 priority) -+{ -+ sb_info_t *si; -+ uint regoff; -+ -+ si = SB_INFO(sbh); -+ regoff = 0; -+ -+ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ -+ -+ /* gpios could be shared on router platforms */ -+ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) { -+ mask = priority ? (sb_gpioreservation & mask) : -+ ((sb_gpioreservation | mask) & ~(sb_gpioreservation)); -+ val &= mask; -+ } -+ -+ switch (si->gpioid) { -+ case SB_CC: -+ regoff = OFFSETOF(chipcregs_t, gpioout); -+ break; -+ -+ case SB_PCI: -+ regoff = OFFSETOF(sbpciregs_t, gpioout); -+ break; -+ -+ case SB_EXTIF: -+ regoff = OFFSETOF(extifregs_t, gpio[0].out); -+ break; -+ } -+ -+ return (sb_corereg(si, si->gpioidx, regoff, mask, val)); -+} -+ -+/* reserve one gpio */ -+uint32 -+sb_gpioreserve(sb_t *sbh, uint32 gpio_bitmask, uint8 priority) -+{ -+ sb_info_t *si; -+ -+ si = SB_INFO(sbh); -+ -+ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ -+ -+ /* only cores on SB_BUS share GPIO's and only applcation users need to -+ * reserve/release GPIO -+ */ -+ if ((BUSTYPE(si->sb.bustype) != SB_BUS) || (!priority)) { -+ ASSERT((BUSTYPE(si->sb.bustype) == SB_BUS) && (priority)); -+ return -1; -+ } -+ /* make sure only one bit is set */ -+ if ((!gpio_bitmask) || ((gpio_bitmask) & (gpio_bitmask - 1))) { -+ ASSERT((gpio_bitmask) && !((gpio_bitmask) & (gpio_bitmask - 1))); -+ return -1; -+ } -+ -+ /* already reserved */ -+ if (sb_gpioreservation & gpio_bitmask) -+ return -1; -+ /* set reservation */ -+ sb_gpioreservation |= gpio_bitmask; -+ -+ return sb_gpioreservation; -+} -+ -+/* release one gpio */ -+/* -+ * releasing the gpio doesn't change the current value on the GPIO last write value -+ * persists till some one overwrites it -+*/ -+ -+uint32 -+sb_gpiorelease(sb_t *sbh, uint32 gpio_bitmask, uint8 priority) -+{ -+ sb_info_t *si; -+ -+ si = SB_INFO(sbh); -+ -+ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ -+ -+ /* only cores on SB_BUS share GPIO's and only applcation users need to -+ * reserve/release GPIO -+ */ -+ if ((BUSTYPE(si->sb.bustype) != SB_BUS) || (!priority)) { -+ ASSERT((BUSTYPE(si->sb.bustype) == SB_BUS) && (priority)); -+ return -1; -+ } -+ /* make sure only one bit is set */ -+ if ((!gpio_bitmask) || ((gpio_bitmask) & (gpio_bitmask - 1))) { -+ ASSERT((gpio_bitmask) && !((gpio_bitmask) & (gpio_bitmask - 1))); -+ return -1; -+ } -+ -+ /* already released */ -+ if (!(sb_gpioreservation & gpio_bitmask)) -+ return -1; -+ -+ /* clear reservation */ -+ sb_gpioreservation &= ~gpio_bitmask; -+ -+ return sb_gpioreservation; -+} -+ -+/* return the current gpioin register value */ -+uint32 -+sb_gpioin(sb_t *sbh) -+{ -+ sb_info_t *si; -+ uint regoff; -+ -+ si = SB_INFO(sbh); -+ regoff = 0; -+ -+ switch (si->gpioid) { -+ case SB_CC: -+ regoff = OFFSETOF(chipcregs_t, gpioin); -+ break; -+ -+ case SB_PCI: -+ regoff = OFFSETOF(sbpciregs_t, gpioin); -+ break; -+ -+ case SB_EXTIF: -+ regoff = OFFSETOF(extifregs_t, gpioin); -+ break; -+ } -+ -+ return (sb_corereg(si, si->gpioidx, regoff, 0, 0)); -+} -+ -+/* mask&set gpio interrupt polarity bits */ -+uint32 -+sb_gpiointpolarity(sb_t *sbh, uint32 mask, uint32 val, uint8 priority) -+{ -+ sb_info_t *si; -+ uint regoff; -+ -+ si = SB_INFO(sbh); -+ regoff = 0; -+ -+ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ -+ -+ /* gpios could be shared on router platforms */ -+ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) { -+ mask = priority ? (sb_gpioreservation & mask) : -+ ((sb_gpioreservation | mask) & ~(sb_gpioreservation)); -+ val &= mask; -+ } -+ -+ switch (si->gpioid) { -+ case SB_CC: -+ regoff = OFFSETOF(chipcregs_t, gpiointpolarity); -+ break; -+ -+ case SB_PCI: -+ /* pci gpio implementation does not support interrupt polarity */ -+ ASSERT(0); -+ break; -+ -+ case SB_EXTIF: -+ regoff = OFFSETOF(extifregs_t, gpiointpolarity); -+ break; -+ } -+ -+ return (sb_corereg(si, si->gpioidx, regoff, mask, val)); -+} -+ -+/* mask&set gpio interrupt mask bits */ -+uint32 -+sb_gpiointmask(sb_t *sbh, uint32 mask, uint32 val, uint8 priority) -+{ -+ sb_info_t *si; -+ uint regoff; -+ -+ si = SB_INFO(sbh); -+ regoff = 0; -+ -+ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ -+ -+ /* gpios could be shared on router platforms */ -+ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) { -+ mask = priority ? (sb_gpioreservation & mask) : -+ ((sb_gpioreservation | mask) & ~(sb_gpioreservation)); -+ val &= mask; -+ } -+ -+ switch (si->gpioid) { -+ case SB_CC: -+ regoff = OFFSETOF(chipcregs_t, gpiointmask); -+ break; -+ -+ case SB_PCI: -+ /* pci gpio implementation does not support interrupt mask */ -+ ASSERT(0); -+ break; -+ -+ case SB_EXTIF: -+ regoff = OFFSETOF(extifregs_t, gpiointmask); -+ break; -+ } -+ -+ return (sb_corereg(si, si->gpioidx, regoff, mask, val)); -+} -+ -+/* assign the gpio to an led */ -+uint32 -+sb_gpioled(sb_t *sbh, uint32 mask, uint32 val) -+{ -+ sb_info_t *si; -+ -+ si = SB_INFO(sbh); -+ if (si->sb.ccrev < 16) -+ return -1; -+ -+ /* gpio led powersave reg */ -+ return (sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimeroutmask), mask, val)); -+} -+ -+/* mask & set gpio timer val */ -+uint32 -+sb_gpiotimerval(sb_t *sbh, uint32 mask, uint32 gpiotimerval) -+{ -+ sb_info_t *si; -+ si = SB_INFO(sbh); -+ -+ if (si->sb.ccrev < 16) -+ return -1; -+ -+ return (sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimerval), mask, gpiotimerval)); -+} -+ -+ -+/* return the slow clock source - LPO, XTAL, or PCI */ -+static uint -+sb_slowclk_src(sb_info_t *si) -+{ -+ chipcregs_t *cc; -+ -+ -+ ASSERT(sb_coreid(&si->sb) == SB_CC); -+ -+ if (si->sb.ccrev < 6) { -+ if ((BUSTYPE(si->sb.bustype) == PCI_BUS) && -+ (OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof(uint32)) & -+ PCI_CFG_GPIO_SCS)) -+ return (SCC_SS_PCI); -+ else -+ return (SCC_SS_XTAL); -+ } else if (si->sb.ccrev < 10) { -+ cc = (chipcregs_t*) sb_setcoreidx(&si->sb, si->curidx); -+ return (R_REG(si->osh, &cc->slow_clk_ctl) & SCC_SS_MASK); -+ } else /* Insta-clock */ -+ return (SCC_SS_XTAL); -+} -+ -+/* return the ILP (slowclock) min or max frequency */ -+static uint -+sb_slowclk_freq(sb_info_t *si, bool max) -+{ -+ chipcregs_t *cc; -+ uint32 slowclk; -+ uint div; -+ -+ -+ ASSERT(sb_coreid(&si->sb) == SB_CC); -+ -+ cc = (chipcregs_t*) sb_setcoreidx(&si->sb, si->curidx); -+ -+ /* shouldn't be here unless we've established the chip has dynamic clk control */ -+ ASSERT(R_REG(si->osh, &cc->capabilities) & CAP_PWR_CTL); -+ -+ slowclk = sb_slowclk_src(si); -+ if (si->sb.ccrev < 6) { -+ if (slowclk == SCC_SS_PCI) -+ return (max? (PCIMAXFREQ/64) : (PCIMINFREQ/64)); -+ else -+ return (max? (XTALMAXFREQ/32) : (XTALMINFREQ/32)); -+ } else if (si->sb.ccrev < 10) { -+ div = 4 * (((R_REG(si->osh, &cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHIFT) + 1); -+ if (slowclk == SCC_SS_LPO) -+ return (max? LPOMAXFREQ : LPOMINFREQ); -+ else if (slowclk == SCC_SS_XTAL) -+ return (max? (XTALMAXFREQ/div) : (XTALMINFREQ/div)); -+ else if (slowclk == SCC_SS_PCI) -+ return (max? (PCIMAXFREQ/div) : (PCIMINFREQ/div)); -+ else -+ ASSERT(0); -+ } else { -+ /* Chipc rev 10 is InstaClock */ -+ div = R_REG(si->osh, &cc->system_clk_ctl) >> SYCC_CD_SHIFT; -+ div = 4 * (div + 1); -+ return (max ? XTALMAXFREQ : (XTALMINFREQ/div)); -+ } -+ return (0); -+} -+ -+static void -+BCMINITFN(sb_clkctl_setdelay)(sb_info_t *si, void *chipcregs) -+{ -+ chipcregs_t * cc; -+ uint slowmaxfreq, pll_delay, slowclk; -+ uint pll_on_delay, fref_sel_delay; -+ -+ pll_delay = PLL_DELAY; -+ -+ /* If the slow clock is not sourced by the xtal then add the xtal_on_delay -+ * since the xtal will also be powered down by dynamic clk control logic. -+ */ -+ -+ slowclk = sb_slowclk_src(si); -+ if (slowclk != SCC_SS_XTAL) -+ pll_delay += XTAL_ON_DELAY; -+ -+ /* Starting with 4318 it is ILP that is used for the delays */ -+ slowmaxfreq = sb_slowclk_freq(si, (si->sb.ccrev >= 10) ? FALSE : TRUE); -+ -+ pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000; -+ fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000; -+ -+ cc = (chipcregs_t *)chipcregs; -+ W_REG(si->osh, &cc->pll_on_delay, pll_on_delay); -+ W_REG(si->osh, &cc->fref_sel_delay, fref_sel_delay); -+} -+ -+/* initialize power control delay registers */ -+void -+BCMINITFN(sb_clkctl_init)(sb_t *sbh) -+{ -+ sb_info_t *si; -+ uint origidx; -+ chipcregs_t *cc; -+ -+ si = SB_INFO(sbh); -+ -+ origidx = si->curidx; -+ -+ if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL) -+ return; -+ -+ if ((si->sb.chip == BCM4321_CHIP_ID) && (si->sb.chiprev < 2)) -+ W_REG(si->osh, &cc->chipcontrol, -+ (si->sb.chiprev == 0) ? CHIPCTRL_4321A0_DEFAULT : CHIPCTRL_4321A1_DEFAULT); -+ -+ if (!(R_REG(si->osh, &cc->capabilities) & CAP_PWR_CTL)) -+ goto done; -+ -+ /* set all Instaclk chip ILP to 1 MHz */ -+ else if (si->sb.ccrev >= 10) -+ SET_REG(si->osh, &cc->system_clk_ctl, SYCC_CD_MASK, -+ (ILP_DIV_1MHZ << SYCC_CD_SHIFT)); -+ -+ sb_clkctl_setdelay(si, (void *)cc); -+ -+done: -+ sb_setcoreidx(sbh, origidx); -+} -+ -+/* return the value suitable for writing to the dot11 core FAST_PWRUP_DELAY register */ -+uint16 -+sb_clkctl_fast_pwrup_delay(sb_t *sbh) -+{ -+ sb_info_t *si; -+ uint origidx; -+ chipcregs_t *cc; -+ uint slowminfreq; -+ uint16 fpdelay; -+ uint intr_val = 0; -+ -+ si = SB_INFO(sbh); -+ fpdelay = 0; -+ origidx = si->curidx; -+ -+ INTR_OFF(si, intr_val); -+ -+ if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL) -+ goto done; -+ -+ if (!(R_REG(si->osh, &cc->capabilities) & CAP_PWR_CTL)) -+ goto done; -+ -+ slowminfreq = sb_slowclk_freq(si, FALSE); -+ fpdelay = (((R_REG(si->osh, &cc->pll_on_delay) + 2) * 1000000) + -+ (slowminfreq - 1)) / slowminfreq; -+ -+done: -+ sb_setcoreidx(sbh, origidx); -+ INTR_RESTORE(si, intr_val); -+ return (fpdelay); -+} -+ -+/* turn primary xtal and/or pll off/on */ -+int -+sb_clkctl_xtal(sb_t *sbh, uint what, bool on) -+{ -+ sb_info_t *si; -+ uint32 in, out, outen; -+ -+ si = SB_INFO(sbh); -+ -+ switch (BUSTYPE(si->sb.bustype)) { -+ -+ -+ case PCMCIA_BUS: -+ return (0); -+ -+ -+ case PCI_BUS: -+ -+ /* pcie core doesn't have any mapping to control the xtal pu */ -+ if (PCIE(si)) -+ return -1; -+ -+ in = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_IN, sizeof(uint32)); -+ out = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof(uint32)); -+ outen = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof(uint32)); -+ -+ /* -+ * Avoid glitching the clock if GPRS is already using it. -+ * We can't actually read the state of the PLLPD so we infer it -+ * by the value of XTAL_PU which *is* readable via gpioin. -+ */ -+ if (on && (in & PCI_CFG_GPIO_XTAL)) -+ return (0); -+ -+ if (what & XTAL) -+ outen |= PCI_CFG_GPIO_XTAL; -+ if (what & PLL) -+ outen |= PCI_CFG_GPIO_PLL; -+ -+ if (on) { -+ /* turn primary xtal on */ -+ if (what & XTAL) { -+ out |= PCI_CFG_GPIO_XTAL; -+ if (what & PLL) -+ out |= PCI_CFG_GPIO_PLL; -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, -+ sizeof(uint32), out); -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, -+ sizeof(uint32), outen); -+ OSL_DELAY(XTAL_ON_DELAY); -+ } -+ -+ /* turn pll on */ -+ if (what & PLL) { -+ out &= ~PCI_CFG_GPIO_PLL; -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, -+ sizeof(uint32), out); -+ OSL_DELAY(2000); -+ } -+ } else { -+ if (what & XTAL) -+ out &= ~PCI_CFG_GPIO_XTAL; -+ if (what & PLL) -+ out |= PCI_CFG_GPIO_PLL; -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof(uint32), out); -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof(uint32), -+ outen); -+ } -+ -+ default: -+ return (-1); -+ } -+ -+ return (0); -+} -+ -+/* set dynamic clk control mode (forceslow, forcefast, dynamic) */ -+/* returns true if we are forcing fast clock */ -+bool -+sb_clkctl_clk(sb_t *sbh, uint mode) -+{ -+ sb_info_t *si; -+ uint origidx; -+ chipcregs_t *cc; -+ uint32 scc; -+ uint intr_val = 0; -+ -+ si = SB_INFO(sbh); -+ -+ /* chipcommon cores prior to rev6 don't support dynamic clock control */ -+ if (si->sb.ccrev < 6) -+ return (FALSE); -+ -+ -+ /* Chips with ccrev 10 are EOL and they don't have SYCC_HR which we use below */ -+ ASSERT(si->sb.ccrev != 10); -+ -+ INTR_OFF(si, intr_val); -+ -+ origidx = si->curidx; -+ -+ if (sb_setcore(sbh, SB_MIPS33, 0) && (sb_corerev(&si->sb) <= 7) && -+ (BUSTYPE(si->sb.bustype) == SB_BUS) && (si->sb.ccrev >= 10)) -+ goto done; -+ -+ /* PR32414WAR "Force HT clock on" all the time, no dynamic clk ctl */ -+ if ((si->sb.chip == BCM4311_CHIP_ID) && (si->sb.chiprev <= 1)) -+ goto done; -+ -+ cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0); -+ ASSERT(cc != NULL); -+ -+ if (!(R_REG(si->osh, &cc->capabilities) & CAP_PWR_CTL)) -+ goto done; -+ -+ switch (mode) { -+ case CLK_FAST: /* force fast (pll) clock */ -+ if (si->sb.ccrev < 10) { -+ /* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */ -+ sb_clkctl_xtal(&si->sb, XTAL, ON); -+ -+ SET_REG(si->osh, &cc->slow_clk_ctl, (SCC_XC | SCC_FS | SCC_IP), SCC_IP); -+ } else -+ OR_REG(si->osh, &cc->system_clk_ctl, SYCC_HR); -+ /* wait for the PLL */ -+ OSL_DELAY(PLL_DELAY); -+ break; -+ -+ case CLK_DYNAMIC: /* enable dynamic clock control */ -+ -+ if (si->sb.ccrev < 10) { -+ scc = R_REG(si->osh, &cc->slow_clk_ctl); -+ scc &= ~(SCC_FS | SCC_IP | SCC_XC); -+ if ((scc & SCC_SS_MASK) != SCC_SS_XTAL) -+ scc |= SCC_XC; -+ W_REG(si->osh, &cc->slow_clk_ctl, scc); -+ -+ /* for dynamic control, we have to release our xtal_pu "force on" */ -+ if (scc & SCC_XC) -+ sb_clkctl_xtal(&si->sb, XTAL, OFF); -+ } else { -+ /* Instaclock */ -+ AND_REG(si->osh, &cc->system_clk_ctl, ~SYCC_HR); -+ } -+ break; -+ -+ default: -+ ASSERT(0); -+ } -+ -+done: -+ sb_setcoreidx(sbh, origidx); -+ INTR_RESTORE(si, intr_val); -+ return (mode == CLK_FAST); -+} -+ -+/* register driver interrupt disabling and restoring callback functions */ -+void -+sb_register_intr_callback(sb_t *sbh, void *intrsoff_fn, void *intrsrestore_fn, -+ void *intrsenabled_fn, void *intr_arg) -+{ -+ sb_info_t *si; -+ -+ si = SB_INFO(sbh); -+ si->intr_arg = intr_arg; -+ si->intrsoff_fn = (sb_intrsoff_t)intrsoff_fn; -+ si->intrsrestore_fn = (sb_intrsrestore_t)intrsrestore_fn; -+ si->intrsenabled_fn = (sb_intrsenabled_t)intrsenabled_fn; -+ /* save current core id. when this function called, the current core -+ * must be the core which provides driver functions(il, et, wl, etc.) -+ */ -+ si->dev_coreid = si->coreid[si->curidx]; -+} -+ -+ -+int -+sb_corepciid(sb_t *sbh, uint func, uint16 *pcivendor, uint16 *pcidevice, -+ uint8 *pciclass, uint8 *pcisubclass, uint8 *pciprogif, -+ uint8 *pciheader) -+{ -+ uint16 vendor = 0xffff, device = 0xffff; -+ uint core, unit; -+ uint chip, chippkg; -+ uint nfunc; -+ char varname[SB_DEVPATH_BUFSZ + 8]; -+ uint8 class, subclass, progif; -+ char devpath[SB_DEVPATH_BUFSZ]; -+ uint8 header; -+ -+ core = sb_coreid(sbh); -+ unit = sb_coreunit(sbh); -+ -+ chip = sb_chip(sbh); -+ chippkg = sb_chippkg(sbh); -+ -+ progif = 0; -+ header = PCI_HEADER_NORMAL; -+ -+ /* Verify whether the function exists for the core */ -+ nfunc = (core == SB_USB20H) ? 2 : 1; -+ if (func >= nfunc) -+ return BCME_ERROR; -+ -+ /* Known vendor translations */ -+ switch (sb_corevendor(sbh)) { -+ case SB_VEND_BCM: -+ vendor = VENDOR_BROADCOM; -+ break; -+ default: -+ return BCME_ERROR; -+ } -+ -+ /* Determine class based on known core codes */ -+ switch (core) { -+ case SB_ILINE20: -+ class = PCI_CLASS_NET; -+ subclass = PCI_NET_ETHER; -+ device = BCM47XX_ILINE_ID; -+ break; -+ case SB_ENET: -+ class = PCI_CLASS_NET; -+ subclass = PCI_NET_ETHER; -+ device = BCM47XX_ENET_ID; -+ break; -+ case SB_GIGETH: -+ class = PCI_CLASS_NET; -+ subclass = PCI_NET_ETHER; -+ device = BCM47XX_GIGETH_ID; -+ break; -+ case SB_SDRAM: -+ case SB_MEMC: -+ class = PCI_CLASS_MEMORY; -+ subclass = PCI_MEMORY_RAM; -+ device = (uint16)core; -+ break; -+ case SB_PCI: -+ case SB_PCIE: -+ class = PCI_CLASS_BRIDGE; -+ subclass = PCI_BRIDGE_PCI; -+ device = (uint16)core; -+ header = PCI_HEADER_BRIDGE; -+ break; -+ case SB_MIPS: -+ case SB_MIPS33: -+ class = PCI_CLASS_CPU; -+ subclass = PCI_CPU_MIPS; -+ device = (uint16)core; -+ break; -+ case SB_CODEC: -+ class = PCI_CLASS_COMM; -+ subclass = PCI_COMM_MODEM; -+ device = BCM47XX_V90_ID; -+ break; -+ case SB_USB: -+ class = PCI_CLASS_SERIAL; -+ subclass = PCI_SERIAL_USB; -+ progif = 0x10; /* OHCI */ -+ device = BCM47XX_USB_ID; -+ break; -+ case SB_USB11H: -+ class = PCI_CLASS_SERIAL; -+ subclass = PCI_SERIAL_USB; -+ progif = 0x10; /* OHCI */ -+ device = BCM47XX_USBH_ID; -+ break; -+ case SB_USB20H: -+ class = PCI_CLASS_SERIAL; -+ subclass = PCI_SERIAL_USB; -+ progif = func == 0 ? 0x10 : 0x20; /* OHCI/EHCI */ -+ device = BCM47XX_USB20H_ID; -+ header = 0x80; /* multifunction */ -+ break; -+ case SB_USB11D: -+ class = PCI_CLASS_SERIAL; -+ subclass = PCI_SERIAL_USB; -+ device = BCM47XX_USBD_ID; -+ break; -+ case SB_USB20D: -+ class = PCI_CLASS_SERIAL; -+ subclass = PCI_SERIAL_USB; -+ device = BCM47XX_USB20D_ID; -+ break; -+ case SB_IPSEC: -+ class = PCI_CLASS_CRYPT; -+ subclass = PCI_CRYPT_NETWORK; -+ device = BCM47XX_IPSEC_ID; -+ break; -+ case SB_ROBO: -+ class = PCI_CLASS_NET; -+ subclass = PCI_NET_OTHER; -+ device = BCM47XX_ROBO_ID; -+ break; -+ case SB_EXTIF: -+ case SB_CC: -+ class = PCI_CLASS_MEMORY; -+ subclass = PCI_MEMORY_FLASH; -+ device = (uint16)core; -+ break; -+ case SB_D11: -+ class = PCI_CLASS_NET; -+ subclass = PCI_NET_OTHER; -+ /* Let nvram variable override core ID */ -+ sb_devpath(sbh, devpath, sizeof(devpath)); -+ sprintf(varname, "%sdevid", devpath); -+ if ((device = (uint16)getintvar(NULL, varname))) -+ break; -+ /* -+ * no longer support wl%did, but keep the code -+ * here for backward compatibility. -+ */ -+ sprintf(varname, "wl%did", unit); -+ if ((device = (uint16)getintvar(NULL, varname))) -+ break; -+ /* Chip specific conversion */ -+ if (chip == BCM4712_CHIP_ID) { -+ if (chippkg == BCM4712SMALL_PKG_ID) -+ device = BCM4306_D11G_ID; -+ else -+ device = BCM4306_D11DUAL_ID; -+ break; -+ } -+ /* ignore it */ -+ device = 0xffff; -+ break; -+ case SB_SATAXOR: -+ class = PCI_CLASS_XOR; -+ subclass = PCI_XOR_QDMA; -+ device = BCM47XX_SATAXOR_ID; -+ break; -+ case SB_ATA100: -+ class = PCI_CLASS_DASDI; -+ subclass = PCI_DASDI_IDE; -+ device = BCM47XX_ATA100_ID; -+ break; -+ -+ default: -+ class = subclass = progif = 0xff; -+ device = (uint16)core; -+ break; -+ } -+ -+ *pcivendor = vendor; -+ *pcidevice = device; -+ *pciclass = class; -+ *pcisubclass = subclass; -+ *pciprogif = progif; -+ *pciheader = header; -+ -+ return 0; -+} -+ -+ -+ -+/* use the mdio interface to write to mdio slaves */ -+static int -+sb_pcie_mdiowrite(sb_info_t *si, uint physmedia, uint regaddr, uint val) -+{ -+ uint mdiodata; -+ uint i = 0; -+ sbpcieregs_t *pcieregs; -+ -+ pcieregs = (sbpcieregs_t*) sb_setcoreidx(&si->sb, si->sb.buscoreidx); -+ ASSERT(pcieregs); -+ -+ /* enable mdio access to SERDES */ -+ W_REG(si->osh, (&pcieregs->mdiocontrol), MDIOCTL_PREAM_EN | MDIOCTL_DIVISOR_VAL); -+ -+ mdiodata = MDIODATA_START | MDIODATA_WRITE | -+ (physmedia << MDIODATA_DEVADDR_SHF) | -+ (regaddr << MDIODATA_REGADDR_SHF) | MDIODATA_TA | val; -+ -+ W_REG(si->osh, (&pcieregs->mdiodata), mdiodata); -+ -+ PR28829_DELAY(); -+ -+ /* retry till the transaction is complete */ -+ while (i < 10) { -+ if (R_REG(si->osh, &(pcieregs->mdiocontrol)) & MDIOCTL_ACCESS_DONE) { -+ /* Disable mdio access to SERDES */ -+ W_REG(si->osh, (&pcieregs->mdiocontrol), 0); -+ return 0; -+ } -+ OSL_DELAY(1000); -+ i++; -+ } -+ -+ SB_ERROR(("sb_pcie_mdiowrite: timed out\n")); -+ /* Disable mdio access to SERDES */ -+ W_REG(si->osh, (&pcieregs->mdiocontrol), 0); -+ ASSERT(0); -+ return 1; -+ -+} -+ -+/* indirect way to read pcie config regs */ -+uint -+sb_pcie_readreg(void *sb, void* arg1, uint offset) -+{ -+ sb_info_t *si; -+ sb_t *sbh; -+ uint retval = 0xFFFFFFFF; -+ sbpcieregs_t *pcieregs; -+ uint addrtype; -+ -+ sbh = (sb_t *)sb; -+ si = SB_INFO(sbh); -+ ASSERT(PCIE(si)); -+ -+ pcieregs = (sbpcieregs_t *)sb_setcore(sbh, SB_PCIE, 0); -+ ASSERT(pcieregs); -+ -+ addrtype = (uint)((uintptr)arg1); -+ switch (addrtype) { -+ case PCIE_CONFIGREGS: -+ W_REG(si->osh, (&pcieregs->configaddr), offset); -+ retval = R_REG(si->osh, &(pcieregs->configdata)); -+ break; -+ case PCIE_PCIEREGS: -+ W_REG(si->osh, &(pcieregs->pcieaddr), offset); -+ retval = R_REG(si->osh, &(pcieregs->pciedata)); -+ break; -+ default: -+ ASSERT(0); -+ break; -+ } -+ return retval; -+} -+ -+/* indirect way to write pcie config/mdio/pciecore regs */ -+uint -+sb_pcie_writereg(sb_t *sbh, void *arg1, uint offset, uint val) -+{ -+ sb_info_t *si; -+ sbpcieregs_t *pcieregs; -+ uint addrtype; -+ -+ si = SB_INFO(sbh); -+ ASSERT(PCIE(si)); -+ -+ pcieregs = (sbpcieregs_t *)sb_setcore(sbh, SB_PCIE, 0); -+ ASSERT(pcieregs); -+ -+ addrtype = (uint)((uintptr)arg1); -+ -+ switch (addrtype) { -+ case PCIE_CONFIGREGS: -+ W_REG(si->osh, (&pcieregs->configaddr), offset); -+ W_REG(si->osh, (&pcieregs->configdata), val); -+ break; -+ case PCIE_PCIEREGS: -+ W_REG(si->osh, (&pcieregs->pcieaddr), offset); -+ W_REG(si->osh, (&pcieregs->pciedata), val); -+ break; -+ default: -+ ASSERT(0); -+ break; -+ } -+ return 0; -+} -+ -+/* Build device path. Support SB, PCI, and JTAG for now. */ -+int -+sb_devpath(sb_t *sbh, char *path, int size) -+{ -+ ASSERT(path); -+ ASSERT(size >= SB_DEVPATH_BUFSZ); -+ -+ switch (BUSTYPE((SB_INFO(sbh))->sb.bustype)) { -+ case SB_BUS: -+ case JTAG_BUS: -+ sprintf(path, "sb/%u/", sb_coreidx(sbh)); -+ break; -+ case PCI_BUS: -+ ASSERT((SB_INFO(sbh))->osh); -+ sprintf(path, "pci/%u/%u/", OSL_PCI_BUS((SB_INFO(sbh))->osh), -+ OSL_PCI_SLOT((SB_INFO(sbh))->osh)); -+ break; -+ case PCMCIA_BUS: -+ SB_ERROR(("sb_devpath: OSL_PCMCIA_BUS() not implemented, bus 1 assumed\n")); -+ SB_ERROR(("sb_devpath: OSL_PCMCIA_SLOT() not implemented, slot 1 assumed\n")); -+ sprintf(path, "pc/%u/%u/", 1, 1); -+ break; -+ case SDIO_BUS: -+ SB_ERROR(("sb_devpath: device 0 assumed\n")); -+ sprintf(path, "sd/%u/", sb_coreidx(sbh)); -+ break; -+ default: -+ ASSERT(0); -+ break; -+ } -+ -+ return 0; -+} -+ -+/* -+ * Fixup SROMless PCI device's configuration. -+ * The current core may be changed upon return. -+ */ -+static int -+sb_pci_fixcfg(sb_info_t *si) -+{ -+ uint origidx, pciidx; -+ sbpciregs_t *pciregs; -+ sbpcieregs_t *pcieregs; -+ uint16 val16, *reg16; -+ char name[SB_DEVPATH_BUFSZ+16], *value; -+ char devpath[SB_DEVPATH_BUFSZ]; -+ -+ ASSERT(BUSTYPE(si->sb.bustype) == PCI_BUS); -+ -+ /* Fixup PI in SROM shadow area to enable the correct PCI core access */ -+ /* save the current index */ -+ origidx = sb_coreidx(&si->sb); -+ -+ /* check 'pi' is correct and fix it if not */ -+ if (si->sb.buscoretype == SB_PCIE) { -+ pcieregs = (sbpcieregs_t *)sb_setcore(&si->sb, SB_PCIE, 0); -+ ASSERT(pcieregs); -+ reg16 = &pcieregs->sprom[SRSH_PI_OFFSET]; -+ } else if (si->sb.buscoretype == SB_PCI) { -+ pciregs = (sbpciregs_t *)sb_setcore(&si->sb, SB_PCI, 0); -+ ASSERT(pciregs); -+ reg16 = &pciregs->sprom[SRSH_PI_OFFSET]; -+ } else { -+ ASSERT(0); -+ return -1; -+ } -+ pciidx = sb_coreidx(&si->sb); -+ val16 = R_REG(si->osh, reg16); -+ if (((val16 & SRSH_PI_MASK) >> SRSH_PI_SHIFT) != (uint16)pciidx) { -+ val16 = (uint16)(pciidx << SRSH_PI_SHIFT) | (val16 & ~SRSH_PI_MASK); -+ W_REG(si->osh, reg16, val16); -+ } -+ -+ /* restore the original index */ -+ sb_setcoreidx(&si->sb, origidx); -+ -+ /* -+ * Fixup bar0window in PCI config space to make the core indicated -+ * by the nvram variable the current core. -+ * !Do it last, it may change the current core! -+ */ -+ if (sb_devpath(&si->sb, devpath, sizeof(devpath))) -+ return -1; -+ sprintf(name, "%sb0w", devpath); -+ if ((value = getvar(NULL, name))) { -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, sizeof(uint32), -+ bcm_strtoul(value, NULL, 16)); -+ /* update curidx since the current core is changed */ -+ si->curidx = _sb_coreidx(si); -+ if (si->curidx == BADIDX) { -+ SB_ERROR(("sb_pci_fixcfg: bad core index\n")); -+ return -1; -+ } -+ } -+ -+ return 0; -+} -+ -+static uint -+sb_chipc_capability(sb_t *sbh) -+{ -+ sb_info_t *si; -+ -+ si = SB_INFO(sbh); -+ -+ /* Make sure that there is ChipCommon core present */ -+ if (si->coreid[SB_CC_IDX] == SB_CC) -+ return (sb_corereg(si, SB_CC_IDX, OFFSETOF(chipcregs_t, capabilities), -+ 0, 0)); -+ return 0; -+} -+ -+/* Return ADDR64 capability of the backplane */ -+bool -+sb_backplane64(sb_t *sbh) -+{ -+ return ((sb_chipc_capability(sbh) & CAP_BKPLN64) != 0); -+} -+ -+void -+sb_btcgpiowar(sb_t *sbh) -+{ -+ sb_info_t *si; -+ uint origidx; -+ uint intr_val = 0; -+ chipcregs_t *cc; -+ si = SB_INFO(sbh); -+ -+ /* Make sure that there is ChipCommon core present && -+ * UART_TX is strapped to 1 -+ */ -+ if (!(sb_chipc_capability(sbh) & CAP_UARTGPIO)) -+ return; -+ -+ /* sb_corereg cannot be used as we have to guarantee 8-bit read/writes */ -+ INTR_OFF(si, intr_val); -+ -+ origidx = sb_coreidx(sbh); -+ -+ cc = (chipcregs_t *)sb_setcore(sbh, SB_CC, 0); -+ if (cc == NULL) -+ goto end; -+ -+ W_REG(si->osh, &cc->uart0mcr, R_REG(si->osh, &cc->uart0mcr) | 0x04); -+ -+end: -+ /* restore the original index */ -+ sb_setcoreidx(sbh, origidx); -+ -+ INTR_RESTORE(si, intr_val); -+} -+ -+/* check if the device is removed */ -+bool -+sb_deviceremoved(sb_t *sbh) -+{ -+ uint32 w; -+ sb_info_t *si; -+ -+ si = SB_INFO(sbh); -+ -+ switch (BUSTYPE(si->sb.bustype)) { -+ case PCI_BUS: -+ ASSERT(si->osh); -+ w = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_VID, sizeof(uint32)); -+ if ((w & 0xFFFF) != VENDOR_BROADCOM) -+ return TRUE; -+ else -+ return FALSE; -+ default: -+ return FALSE; -+ } -+ return FALSE; -+} -+ -+/* Return the RAM size of the SOCRAM core */ -+uint32 -+sb_socram_size(sb_t *sbh) -+{ -+ sb_info_t *si; -+ uint origidx; -+ uint intr_val = 0; -+ -+ sbsocramregs_t *regs; -+ bool wasup; -+ uint corerev; -+ uint32 coreinfo; -+ uint memsize = 0; -+ -+ si = SB_INFO(sbh); -+ ASSERT(si); -+ -+ /* Block ints and save current core */ -+ INTR_OFF(si, intr_val); -+ origidx = sb_coreidx(sbh); -+ -+ /* Switch to SOCRAM core */ -+ if (!(regs = sb_setcore(sbh, SB_SOCRAM, 0))) -+ goto done; -+ -+ /* Get info for determining size */ -+ if (!(wasup = sb_iscoreup(sbh))) -+ sb_core_reset(sbh, 0, 0); -+ corerev = sb_corerev(sbh); -+ coreinfo = R_REG(si->osh, ®s->coreinfo); -+ -+ /* Calculate size from coreinfo based on rev */ -+ switch (corerev) { -+ case 0: -+ memsize = 1 << (16 + (coreinfo & SRCI_MS0_MASK)); -+ break; -+ default: /* rev >= 1 */ -+ memsize = 1 << (SR_BSZ_BASE + (coreinfo & SRCI_SRBSZ_MASK)); -+ memsize *= (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT; -+ break; -+ } -+ -+ /* Return to previous state and core */ -+ if (!wasup) -+ sb_core_disable(sbh, 0); -+ sb_setcoreidx(sbh, origidx); -+ -+done: -+ INTR_RESTORE(si, intr_val); -+ return memsize; -+} -+ -+ -diff -urN linux.old/arch/mips/bcm947xx/setup.c linux.dev/arch/mips/bcm947xx/setup.c ---- linux.old/arch/mips/bcm947xx/setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/setup.c 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,241 @@ -+/* -+ * Generic setup routines for Broadcom MIPS boards -+ * -+ * Copyright (C) 2005 Felix Fietkau <nbd@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ */ -+ -+#include <linux/config.h> -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/serialP.h> -+#include <linux/ide.h> -+#include <asm/bootinfo.h> -+#include <asm/cpu.h> -+#include <asm/time.h> -+#include <asm/reboot.h> -+ -+#include <typedefs.h> -+#include <osl.h> -+#include <sbutils.h> -+#include <bcmutils.h> -+#include <bcmnvram.h> -+#include <sbhndmips.h> -+#include <hndmips.h> -+#include <trxhdr.h> -+ -+/* Virtual IRQ base, after last hw IRQ */ -+#define SBMIPS_VIRTIRQ_BASE 6 -+ -+/* # IRQs, hw and sw IRQs */ -+#define SBMIPS_NUMIRQS 8 -+ -+/* Global SB handle */ -+sb_t *bcm947xx_sbh = NULL; -+spinlock_t bcm947xx_sbh_lock = SPIN_LOCK_UNLOCKED; -+ -+/* Convenience */ -+#define sbh bcm947xx_sbh -+#define sbh_lock bcm947xx_sbh_lock -+ -+extern void bcm947xx_time_init(void); -+extern void bcm947xx_timer_setup(struct irqaction *irq); -+ -+#ifdef CONFIG_REMOTE_DEBUG -+extern void set_debug_traps(void); -+extern void rs_kgdb_hook(struct serial_state *); -+extern void breakpoint(void); -+#endif -+ -+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) -+extern struct ide_ops std_ide_ops; -+#endif -+ -+/* Kernel command line */ -+char arcs_cmdline[CL_SIZE] __initdata = CONFIG_CMDLINE; -+extern void sb_serial_init(sb_t *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift)); -+ -+void -+bcm947xx_machine_restart(char *command) -+{ -+ printk("Please stand by while rebooting the system...\n"); -+ -+ /* Set the watchdog timer to reset immediately */ -+ __cli(); -+ sb_watchdog(sbh, 1); -+ while (1); -+} -+ -+void -+bcm947xx_machine_halt(void) -+{ -+ printk("System halted\n"); -+ -+ /* Disable interrupts and watchdog and spin forever */ -+ __cli(); -+ sb_watchdog(sbh, 0); -+ while (1); -+} -+ -+#ifdef CONFIG_SERIAL -+ -+static int ser_line = 0; -+ -+typedef struct { -+ void *regs; -+ uint irq; -+ uint baud_base; -+ uint reg_shift; -+} serial_port; -+ -+static serial_port ports[4]; -+static int num_ports = 0; -+ -+static void -+serial_add(void *regs, uint irq, uint baud_base, uint reg_shift) -+{ -+ ports[num_ports].regs = regs; -+ ports[num_ports].irq = irq; -+ ports[num_ports].baud_base = baud_base; -+ ports[num_ports].reg_shift = reg_shift; -+ num_ports++; -+} -+ -+static void -+do_serial_add(serial_port *port) -+{ -+ void *regs; -+ uint irq; -+ uint baud_base; -+ uint reg_shift; -+ struct serial_struct s; -+ -+ regs = port->regs; -+ irq = port->irq; -+ baud_base = port->baud_base; -+ reg_shift = port->reg_shift; -+ -+ memset(&s, 0, sizeof(s)); -+ -+ s.line = ser_line++; -+ s.iomem_base = regs; -+ s.irq = irq + 2; -+ s.baud_base = baud_base / 16; -+ s.flags = ASYNC_BOOT_AUTOCONF; -+ s.io_type = SERIAL_IO_MEM; -+ s.iomem_reg_shift = reg_shift; -+ -+ if (early_serial_setup(&s) != 0) { -+ printk(KERN_ERR "Serial setup failed!\n"); -+ } -+} -+ -+#endif /* CONFIG_SERIAL */ -+ -+void __init -+brcm_setup(void) -+{ -+ char *s; -+ int i; -+ char *value; -+ -+ /* Get global SB handle */ -+ sbh = sb_kattach(); -+ -+ /* Initialize clocks and interrupts */ -+ sb_mips_init(sbh, SBMIPS_VIRTIRQ_BASE); -+ -+ if (BCM330X(current_cpu_data.processor_id) && -+ (read_c0_diag() & BRCM_PFC_AVAIL)) { -+ /* -+ * Now that the sbh is inited set the proper PFC value -+ */ -+ printk("Setting the PFC to its default value\n"); -+ enable_pfc(PFC_AUTO); -+ } -+ -+ -+#ifdef CONFIG_SERIAL -+ sb_serial_init(sbh, serial_add); -+ -+ /* reverse serial ports if nvram variable starts with console=ttyS1 */ -+ /* Initialize UARTs */ -+ s = nvram_get("kernel_args"); -+ if (!s) s = ""; -+ if (!strncmp(s, "console=ttyS1", 13)) { -+ for (i = num_ports; i; i--) -+ do_serial_add(&ports[i - 1]); -+ } else { -+ for (i = 0; i < num_ports; i++) -+ do_serial_add(&ports[i]); -+ } -+#endif -+ -+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) -+ ide_ops = &std_ide_ops; -+#endif -+ -+ /* Override default command line arguments */ -+ value = nvram_get("kernel_cmdline"); -+ if (value && strlen(value) && strncmp(value, "empty", 5)) -+ strncpy(arcs_cmdline, value, sizeof(arcs_cmdline)); -+ -+ -+ /* Generic setup */ -+ _machine_restart = bcm947xx_machine_restart; -+ _machine_halt = bcm947xx_machine_halt; -+ _machine_power_off = bcm947xx_machine_halt; -+ -+ board_time_init = bcm947xx_time_init; -+ board_timer_setup = bcm947xx_timer_setup; -+} -+ -+const char * -+get_system_type(void) -+{ -+ static char s[32]; -+ -+ if (bcm947xx_sbh) { -+ sprintf(s, "Broadcom BCM%X chip rev %d", sb_chip(bcm947xx_sbh), -+ sb_chiprev(bcm947xx_sbh)); -+ return s; -+ } -+ else -+ return "Broadcom BCM947XX"; -+} -+ -+void __init -+bus_error_init(void) -+{ -+} -+ -diff -urN linux.old/arch/mips/bcm947xx/sflash.c linux.dev/arch/mips/bcm947xx/sflash.c ---- linux.old/arch/mips/bcm947xx/sflash.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/sflash.c 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,422 @@ -+/* -+ * Broadcom SiliconBackplane chipcommon serial flash interface -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: sflash.c,v 1.1.1.13 2006/02/27 03:43:16 honor Exp $ -+ */ -+ -+#include <osl.h> -+#include <typedefs.h> -+#include <sbconfig.h> -+#include <sbchipc.h> -+#include <mipsinc.h> -+#include <bcmutils.h> -+#include <bcmdevs.h> -+#include <sflash.h> -+ -+/* Private global state */ -+static struct sflash sflash; -+ -+/* Issue a serial flash command */ -+static INLINE void -+sflash_cmd(chipcregs_t *cc, uint opcode) -+{ -+ W_REG(NULL, &cc->flashcontrol, SFLASH_START | opcode); -+ while (R_REG(NULL, &cc->flashcontrol) & SFLASH_BUSY); -+} -+ -+/* Initialize serial flash access */ -+struct sflash * -+sflash_init(chipcregs_t *cc) -+{ -+ uint32 id, id2; -+ -+ bzero(&sflash, sizeof(sflash)); -+ -+ sflash.type = R_REG(NULL, &cc->capabilities) & CAP_FLASH_MASK; -+ -+ switch (sflash.type) { -+ case SFLASH_ST: -+ /* Probe for ST chips */ -+ sflash_cmd(cc, SFLASH_ST_DP); -+ sflash_cmd(cc, SFLASH_ST_RES); -+ id = R_REG(NULL, &cc->flashdata); -+ switch (id) { -+ case 0x11: -+ /* ST M25P20 2 Mbit Serial Flash */ -+ sflash.blocksize = 64 * 1024; -+ sflash.numblocks = 4; -+ break; -+ case 0x12: -+ /* ST M25P40 4 Mbit Serial Flash */ -+ sflash.blocksize = 64 * 1024; -+ sflash.numblocks = 8; -+ break; -+ case 0x13: -+ /* ST M25P80 8 Mbit Serial Flash */ -+ sflash.blocksize = 64 * 1024; -+ sflash.numblocks = 16; -+ break; -+ case 0x14: -+ /* ST M25P16 16 Mbit Serial Flash */ -+ sflash.blocksize = 64 * 1024; -+ sflash.numblocks = 32; -+ break; -+ case 0x15: -+ /* ST M25P32 32 Mbit Serial Flash */ -+ sflash.blocksize = 64 * 1024; -+ sflash.numblocks = 64; -+ break; -+ case 0x16: -+ /* ST M25P64 64 Mbit Serial Flash */ -+ sflash.blocksize = 64 * 1024; -+ sflash.numblocks = 128; -+ break; -+ case 0xbf: -+ W_REG(NULL, &cc->flashaddress, 1); -+ sflash_cmd(cc, SFLASH_ST_RES); -+ id2 = R_REG(NULL, &cc->flashdata); -+ if (id2 == 0x44) { -+ /* SST M25VF80 4 Mbit Serial Flash */ -+ sflash.blocksize = 64 * 1024; -+ sflash.numblocks = 8; -+ } -+ break; -+ } -+ break; -+ -+ case SFLASH_AT: -+ /* Probe for Atmel chips */ -+ sflash_cmd(cc, SFLASH_AT_STATUS); -+ id = R_REG(NULL, &cc->flashdata) & 0x3c; -+ switch (id) { -+ case 0xc: -+ /* Atmel AT45DB011 1Mbit Serial Flash */ -+ sflash.blocksize = 256; -+ sflash.numblocks = 512; -+ break; -+ case 0x14: -+ /* Atmel AT45DB021 2Mbit Serial Flash */ -+ sflash.blocksize = 256; -+ sflash.numblocks = 1024; -+ break; -+ case 0x1c: -+ /* Atmel AT45DB041 4Mbit Serial Flash */ -+ sflash.blocksize = 256; -+ sflash.numblocks = 2048; -+ break; -+ case 0x24: -+ /* Atmel AT45DB081 8Mbit Serial Flash */ -+ sflash.blocksize = 256; -+ sflash.numblocks = 4096; -+ break; -+ case 0x2c: -+ /* Atmel AT45DB161 16Mbit Serial Flash */ -+ sflash.blocksize = 512; -+ sflash.numblocks = 4096; -+ break; -+ case 0x34: -+ /* Atmel AT45DB321 32Mbit Serial Flash */ -+ sflash.blocksize = 512; -+ sflash.numblocks = 8192; -+ break; -+ case 0x3c: -+ /* Atmel AT45DB642 64Mbit Serial Flash */ -+ sflash.blocksize = 1024; -+ sflash.numblocks = 8192; -+ break; -+ } -+ break; -+ } -+ -+ sflash.size = sflash.blocksize * sflash.numblocks; -+ return sflash.size ? &sflash : NULL; -+} -+ -+/* Read len bytes starting at offset into buf. Returns number of bytes read. */ -+int -+sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf) -+{ -+ int cnt; -+ uint32 *from, *to; -+ -+ if (!len) -+ return 0; -+ -+ if ((offset + len) > sflash.size) -+ return -22; -+ -+ if ((len >= 4) && (offset & 3)) -+ cnt = 4 - (offset & 3); -+ else if ((len >= 4) && ((uint32)buf & 3)) -+ cnt = 4 - ((uint32)buf & 3); -+ else -+ cnt = len; -+ -+ from = (uint32 *)KSEG1ADDR(SB_FLASH2 + offset); -+ to = (uint32 *)buf; -+ -+ if (cnt < 4) { -+ bcopy(from, to, cnt); -+ return cnt; -+ } -+ -+ while (cnt >= 4) { -+ *to++ = *from++; -+ cnt -= 4; -+ } -+ -+ return (len - cnt); -+} -+ -+/* Poll for command completion. Returns zero when complete. */ -+int -+sflash_poll(chipcregs_t *cc, uint offset) -+{ -+ if (offset >= sflash.size) -+ return -22; -+ -+ switch (sflash.type) { -+ case SFLASH_ST: -+ /* Check for ST Write In Progress bit */ -+ sflash_cmd(cc, SFLASH_ST_RDSR); -+ return R_REG(NULL, &cc->flashdata) & SFLASH_ST_WIP; -+ case SFLASH_AT: -+ /* Check for Atmel Ready bit */ -+ sflash_cmd(cc, SFLASH_AT_STATUS); -+ return !(R_REG(NULL, &cc->flashdata) & SFLASH_AT_READY); -+ } -+ -+ return 0; -+} -+ -+/* Write len bytes starting at offset into buf. Returns number of bytes -+ * written. Caller should poll for completion. -+ */ -+int -+sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf) -+{ -+ struct sflash *sfl; -+ int ret = 0; -+ bool is4712b0; -+ uint32 page, byte, mask; -+ -+ if (!len) -+ return 0; -+ -+ if ((offset + len) > sflash.size) -+ return -22; -+ -+ sfl = &sflash; -+ switch (sfl->type) { -+ case SFLASH_ST: -+ mask = R_REG(NULL, &cc->chipid); -+ is4712b0 = (((mask & CID_ID_MASK) == BCM4712_CHIP_ID) && -+ ((mask & CID_REV_MASK) == (3 << CID_REV_SHIFT))); -+ /* Enable writes */ -+ sflash_cmd(cc, SFLASH_ST_WREN); -+ if (is4712b0) { -+ mask = 1 << 14; -+ W_REG(NULL, &cc->flashaddress, offset); -+ W_REG(NULL, &cc->flashdata, *buf++); -+ /* Set chip select */ -+ OR_REG(NULL, &cc->gpioout, mask); -+ /* Issue a page program with the first byte */ -+ sflash_cmd(cc, SFLASH_ST_PP); -+ ret = 1; -+ offset++; -+ len--; -+ while (len > 0) { -+ if ((offset & 255) == 0) { -+ /* Page boundary, drop cs and return */ -+ AND_REG(NULL, &cc->gpioout, ~mask); -+ if (!sflash_poll(cc, offset)) { -+ /* Flash rejected command */ -+ return -11; -+ } -+ return ret; -+ } else { -+ /* Write single byte */ -+ sflash_cmd(cc, *buf++); -+ } -+ ret++; -+ offset++; -+ len--; -+ } -+ /* All done, drop cs if needed */ -+ if ((offset & 255) != 1) { -+ /* Drop cs */ -+ AND_REG(NULL, &cc->gpioout, ~mask); -+ if (!sflash_poll(cc, offset)) { -+ /* Flash rejected command */ -+ return -12; -+ } -+ } -+ } else { -+ ret = 1; -+ W_REG(NULL, &cc->flashaddress, offset); -+ W_REG(NULL, &cc->flashdata, *buf); -+ /* Page program */ -+ sflash_cmd(cc, SFLASH_ST_PP); -+ } -+ break; -+ case SFLASH_AT: -+ mask = sfl->blocksize - 1; -+ page = (offset & ~mask) << 1; -+ byte = offset & mask; -+ /* Read main memory page into buffer 1 */ -+ if (byte || (len < sfl->blocksize)) { -+ W_REG(NULL, &cc->flashaddress, page); -+ sflash_cmd(cc, SFLASH_AT_BUF1_LOAD); -+ /* 250 us for AT45DB321B */ -+ SPINWAIT(sflash_poll(cc, offset), 1000); -+ ASSERT(!sflash_poll(cc, offset)); -+ } -+ /* Write into buffer 1 */ -+ for (ret = 0; (ret < (int)len) && (byte < sfl->blocksize); ret++) { -+ W_REG(NULL, &cc->flashaddress, byte++); -+ W_REG(NULL, &cc->flashdata, *buf++); -+ sflash_cmd(cc, SFLASH_AT_BUF1_WRITE); -+ } -+ /* Write buffer 1 into main memory page */ -+ W_REG(NULL, &cc->flashaddress, page); -+ sflash_cmd(cc, SFLASH_AT_BUF1_PROGRAM); -+ break; -+ } -+ -+ return ret; -+} -+ -+/* Erase a region. Returns number of bytes scheduled for erasure. -+ * Caller should poll for completion. -+ */ -+int -+sflash_erase(chipcregs_t *cc, uint offset) -+{ -+ struct sflash *sfl; -+ -+ if (offset >= sflash.size) -+ return -22; -+ -+ sfl = &sflash; -+ switch (sfl->type) { -+ case SFLASH_ST: -+ sflash_cmd(cc, SFLASH_ST_WREN); -+ W_REG(NULL, &cc->flashaddress, offset); -+ sflash_cmd(cc, SFLASH_ST_SE); -+ return sfl->blocksize; -+ case SFLASH_AT: -+ W_REG(NULL, &cc->flashaddress, offset << 1); -+ sflash_cmd(cc, SFLASH_AT_PAGE_ERASE); -+ return sfl->blocksize; -+ } -+ -+ return 0; -+} -+ -+/* -+ * writes the appropriate range of flash, a NULL buf simply erases -+ * the region of flash -+ */ -+int -+sflash_commit(chipcregs_t *cc, uint offset, uint len, const uchar *buf) -+{ -+ struct sflash *sfl; -+ uchar *block = NULL, *cur_ptr, *blk_ptr; -+ uint blocksize = 0, mask, cur_offset, cur_length, cur_retlen, remainder; -+ uint blk_offset, blk_len, copied; -+ int bytes, ret = 0; -+ -+ /* Check address range */ -+ if (len <= 0) -+ return 0; -+ -+ sfl = &sflash; -+ if ((offset + len) > sfl->size) -+ return -1; -+ -+ blocksize = sfl->blocksize; -+ mask = blocksize - 1; -+ -+ /* Allocate a block of mem */ -+ if (!(block = MALLOC(NULL, blocksize))) -+ return -1; -+ -+ while (len) { -+ /* Align offset */ -+ cur_offset = offset & ~mask; -+ cur_length = blocksize; -+ cur_ptr = block; -+ -+ remainder = blocksize - (offset & mask); -+ if (len < remainder) -+ cur_retlen = len; -+ else -+ cur_retlen = remainder; -+ -+ /* buf == NULL means erase only */ -+ if (buf) { -+ /* Copy existing data into holding block if necessary */ -+ if ((offset & mask) || (len < blocksize)) { -+ blk_offset = cur_offset; -+ blk_len = cur_length; -+ blk_ptr = cur_ptr; -+ -+ /* Copy entire block */ -+ while (blk_len) { -+ copied = sflash_read(cc, blk_offset, blk_len, blk_ptr); -+ blk_offset += copied; -+ blk_len -= copied; -+ blk_ptr += copied; -+ } -+ } -+ -+ /* Copy input data into holding block */ -+ memcpy(cur_ptr + (offset & mask), buf, cur_retlen); -+ } -+ -+ /* Erase block */ -+ if ((ret = sflash_erase(cc, (uint) cur_offset)) < 0) -+ goto done; -+ while (sflash_poll(cc, (uint) cur_offset)); -+ -+ /* buf == NULL means erase only */ -+ if (!buf) { -+ offset += cur_retlen; -+ len -= cur_retlen; -+ continue; -+ } -+ -+ /* Write holding block */ -+ while (cur_length > 0) { -+ if ((bytes = sflash_write(cc, -+ (uint) cur_offset, -+ (uint) cur_length, -+ (uchar *) cur_ptr)) < 0) { -+ ret = bytes; -+ goto done; -+ } -+ while (sflash_poll(cc, (uint) cur_offset)); -+ cur_offset += bytes; -+ cur_length -= bytes; -+ cur_ptr += bytes; -+ } -+ -+ offset += cur_retlen; -+ len -= cur_retlen; -+ buf += cur_retlen; -+ } -+ -+ ret = len; -+done: -+ if (block) -+ MFREE(NULL, block, blocksize); -+ return ret; -+} -diff -urN linux.old/arch/mips/bcm947xx/time.c linux.dev/arch/mips/bcm947xx/time.c ---- linux.old/arch/mips/bcm947xx/time.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/bcm947xx/time.c 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,104 @@ -+/* -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: time.c,v 1.1.1.10 2006/02/27 03:42:55 honor Exp $ -+ */ -+#include <linux/config.h> -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/sched.h> -+#include <linux/serial_reg.h> -+#include <linux/interrupt.h> -+#include <asm/addrspace.h> -+#include <asm/io.h> -+#include <asm/time.h> -+ -+#include <typedefs.h> -+#include <osl.h> -+#include <bcmnvram.h> -+#include <sbconfig.h> -+#include <sbextif.h> -+#include <sbutils.h> -+#include <hndmips.h> -+#include <mipsinc.h> -+#include <hndcpu.h> -+ -+/* Global SB handle */ -+extern void *bcm947xx_sbh; -+extern spinlock_t bcm947xx_sbh_lock; -+ -+/* Convenience */ -+#define sbh bcm947xx_sbh -+#define sbh_lock bcm947xx_sbh_lock -+ -+extern int panic_timeout; -+static int watchdog = 0; -+static u8 *mcr = NULL; -+ -+void __init -+bcm947xx_time_init(void) -+{ -+ unsigned int hz; -+ extifregs_t *eir; -+ -+ /* -+ * Use deterministic values for initial counter interrupt -+ * so that calibrate delay avoids encountering a counter wrap. -+ */ -+ write_c0_count(0); -+ write_c0_compare(0xffff); -+ -+ if (!(hz = sb_cpu_clock(sbh))) -+ hz = 100000000; -+ -+ printk("CPU: BCM%04x rev %d at %d MHz\n", sb_chip(sbh), sb_chiprev(sbh), -+ (hz + 500000) / 1000000); -+ -+ /* Set MIPS counter frequency for fixed_rate_gettimeoffset() */ -+ mips_hpt_frequency = hz / 2; -+ -+ /* Set watchdog interval in ms */ -+ watchdog = simple_strtoul(nvram_safe_get("watchdog"), NULL, 0); -+ -+ /* Please set the watchdog to 3 sec if it is less than 3 but not equal to 0 */ -+ if (watchdog > 0) { -+ if (watchdog < 3000) -+ watchdog = 3000; -+ } -+ -+ /* Set panic timeout in seconds */ -+ panic_timeout = watchdog / 1000; -+} -+ -+static void -+bcm947xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) -+{ -+ /* Generic MIPS timer code */ -+ timer_interrupt(irq, dev_id, regs); -+ -+ /* Set the watchdog timer to reset after the specified number of ms */ -+ if (watchdog > 0) -+ sb_watchdog(sbh, WATCHDOG_CLOCK / 1000 * watchdog); -+} -+ -+static struct irqaction bcm947xx_timer_irqaction = { -+ bcm947xx_timer_interrupt, -+ SA_INTERRUPT, -+ 0, -+ "timer", -+ NULL, -+ NULL -+}; -+ -+void __init -+bcm947xx_timer_setup(struct irqaction *irq) -+{ -+ /* Enable the timer interrupt */ -+ setup_irq(7, &bcm947xx_timer_irqaction); -+} diff -urN linux.old/arch/mips/config-shared.in linux.dev/arch/mips/config-shared.in --- linux.old/arch/mips/config-shared.in 2006-10-02 21:23:10.000000000 +0200 +++ linux.dev/arch/mips/config-shared.in 2006-10-02 21:19:59.000000000 +0200 @@ -16330,355 +471,6 @@ diff -urN linux.old/drivers/parport/Makefile linux.dev/drivers/parport/Makefile obj-$(CONFIG_PARPORT_PC_PCMCIA) += parport_cs.o obj-$(CONFIG_PARPORT_AMIGA) += parport_amiga.o obj-$(CONFIG_PARPORT_MFC3) += parport_mfc3.o -diff -urN linux.old/drivers/parport/parport_splink.c linux.dev/drivers/parport/parport_splink.c ---- linux.old/drivers/parport/parport_splink.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/parport/parport_splink.c 2006-10-02 21:19:59.000000000 +0200 -@@ -0,0 +1,345 @@ -+/* Low-level parallel port routines for the ASUS WL-500g built-in port -+ * -+ * Author: Nuno Grilo <nuno.grilo@netcabo.pt> -+ * Based on parport_pc source -+ */ -+ -+#include <linux/config.h> -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/ioport.h> -+#include <linux/kernel.h> -+#include <linux/slab.h> -+#include <linux/parport.h> -+#include <linux/parport_pc.h> -+ -+#define SPLINK_ADDRESS 0xBF800010 -+ -+#undef DEBUG -+ -+#ifdef DEBUG -+#define DPRINTK printk -+#else -+#define DPRINTK(stuff...) -+#endif -+ -+ -+/* __parport_splink_frob_control differs from parport_splink_frob_control in that -+ * it doesn't do any extra masking. */ -+static __inline__ unsigned char __parport_splink_frob_control (struct parport *p, -+ unsigned char mask, -+ unsigned char val) -+{ -+ struct parport_pc_private *priv = p->physport->private_data; -+ unsigned char *io = (unsigned char *) p->base; -+ unsigned char ctr = priv->ctr; -+#ifdef DEBUG_PARPORT -+ printk (KERN_DEBUG -+ "__parport_splink_frob_control(%02x,%02x): %02x -> %02x\n", -+ mask, val, ctr, ((ctr & ~mask) ^ val) & priv->ctr_writable); -+#endif -+ ctr = (ctr & ~mask) ^ val; -+ ctr &= priv->ctr_writable; /* only write writable bits. */ -+ *(io+2) = ctr; -+ priv->ctr = ctr; /* Update soft copy */ -+ return ctr; -+} -+ -+ -+ -+static void parport_splink_data_forward (struct parport *p) -+{ -+ DPRINTK(KERN_DEBUG "parport_splink: parport_data_forward called\n"); -+ __parport_splink_frob_control (p, 0x20, 0); -+} -+ -+static void parport_splink_data_reverse (struct parport *p) -+{ -+ DPRINTK(KERN_DEBUG "parport_splink: parport_data_forward called\n"); -+ __parport_splink_frob_control (p, 0x20, 0x20); -+} -+ -+/* -+static void parport_splink_interrupt(int irq, void *dev_id, struct pt_regs *regs) -+{ -+ DPRINTK(KERN_DEBUG "parport_splink: IRQ handler called\n"); -+ parport_generic_irq(irq, (struct parport *) dev_id, regs); -+} -+*/ -+ -+static void parport_splink_enable_irq(struct parport *p) -+{ -+ DPRINTK(KERN_DEBUG "parport_splink: parport_splink_enable_irq called\n"); -+ __parport_splink_frob_control (p, 0x10, 0x10); -+} -+ -+static void parport_splink_disable_irq(struct parport *p) -+{ -+ DPRINTK(KERN_DEBUG "parport_splink: parport_splink_disable_irq called\n"); -+ __parport_splink_frob_control (p, 0x10, 0); -+} -+ -+static void parport_splink_init_state(struct pardevice *dev, struct parport_state *s) -+{ -+ DPRINTK(KERN_DEBUG "parport_splink: parport_splink_init_state called\n"); -+ s->u.pc.ctr = 0xc | (dev->irq_func ? 0x10 : 0x0); -+ if (dev->irq_func && -+ dev->port->irq != PARPORT_IRQ_NONE) -+ /* Set ackIntEn */ -+ s->u.pc.ctr |= 0x10; -+} -+ -+static void parport_splink_save_state(struct parport *p, struct parport_state *s) -+{ -+ const struct parport_pc_private *priv = p->physport->private_data; -+ DPRINTK(KERN_DEBUG "parport_splink: parport_splink_save_state called\n"); -+ s->u.pc.ctr = priv->ctr; -+} -+ -+static void parport_splink_restore_state(struct parport *p, struct parport_state *s) -+{ -+ struct parport_pc_private *priv = p->physport->private_data; -+ unsigned char *io = (unsigned char *) p->base; -+ unsigned char ctr = s->u.pc.ctr; -+ -+ DPRINTK(KERN_DEBUG "parport_splink: parport_splink_restore_state called\n"); -+ *(io+2) = ctr; -+ priv->ctr = ctr; -+} -+ -+static void parport_splink_setup_interrupt(void) { -+ return; -+} -+ -+static void parport_splink_write_data(struct parport *p, unsigned char d) { -+ DPRINTK(KERN_DEBUG "parport_splink: write data called\n"); -+ unsigned char *io = (unsigned char *) p->base; -+ *io = d; -+} -+ -+static unsigned char parport_splink_read_data(struct parport *p) { -+ DPRINTK(KERN_DEBUG "parport_splink: read data called\n"); -+ unsigned char *io = (unsigned char *) p->base; -+ return *io; -+} -+ -+static void parport_splink_write_control(struct parport *p, unsigned char d) -+{ -+ const unsigned char wm = (PARPORT_CONTROL_STROBE | -+ PARPORT_CONTROL_AUTOFD | -+ PARPORT_CONTROL_INIT | -+ PARPORT_CONTROL_SELECT); -+ -+ DPRINTK(KERN_DEBUG "parport_splink: write control called\n"); -+ /* Take this out when drivers have adapted to the newer interface. */ -+ if (d & 0x20) { -+ printk (KERN_DEBUG "%s (%s): use data_reverse for this!\n", -+ p->name, p->cad->name); -+ parport_splink_data_reverse (p); -+ } -+ -+ __parport_splink_frob_control (p, wm, d & wm); -+} -+ -+static unsigned char parport_splink_read_control(struct parport *p) -+{ -+ const unsigned char wm = (PARPORT_CONTROL_STROBE | -+ PARPORT_CONTROL_AUTOFD | -+ PARPORT_CONTROL_INIT | -+ PARPORT_CONTROL_SELECT); -+ DPRINTK(KERN_DEBUG "parport_splink: read control called\n"); -+ const struct parport_pc_private *priv = p->physport->private_data; -+ return priv->ctr & wm; /* Use soft copy */ -+} -+ -+static unsigned char parport_splink_frob_control (struct parport *p, unsigned char mask, -+ unsigned char val) -+{ -+ const unsigned char wm = (PARPORT_CONTROL_STROBE | -+ PARPORT_CONTROL_AUTOFD | -+ PARPORT_CONTROL_INIT | -+ PARPORT_CONTROL_SELECT); -+ -+ DPRINTK(KERN_DEBUG "parport_splink: frob control called\n"); -+ /* Take this out when drivers have adapted to the newer interface. */ -+ if (mask & 0x20) { -+ printk (KERN_DEBUG "%s (%s): use data_%s for this!\n", -+ p->name, p->cad->name, -+ (val & 0x20) ? "reverse" : "forward"); -+ if (val & 0x20) -+ parport_splink_data_reverse (p); -+ else -+ parport_splink_data_forward (p); -+ } -+ -+ /* Restrict mask and val to control lines. */ -+ mask &= wm; -+ val &= wm; -+ -+ return __parport_splink_frob_control (p, mask, val); -+} -+ -+static unsigned char parport_splink_read_status(struct parport *p) -+{ -+ DPRINTK(KERN_DEBUG "parport_splink: read status called\n"); -+ unsigned char *io = (unsigned char *) p->base; -+ return *(io+1); -+} -+ -+static void parport_splink_inc_use_count(void) -+{ -+#ifdef MODULE -+ MOD_INC_USE_COUNT; -+#endif -+} -+ -+static void parport_splink_dec_use_count(void) -+{ -+#ifdef MODULE -+ MOD_DEC_USE_COUNT; -+#endif -+} -+ -+static struct parport_operations parport_splink_ops = -+{ -+ parport_splink_write_data, -+ parport_splink_read_data, -+ -+ parport_splink_write_control, -+ parport_splink_read_control, -+ parport_splink_frob_control, -+ -+ parport_splink_read_status, -+ -+ parport_splink_enable_irq, -+ parport_splink_disable_irq, -+ -+ parport_splink_data_forward, -+ parport_splink_data_reverse, -+ -+ parport_splink_init_state, -+ parport_splink_save_state, -+ parport_splink_restore_state, -+ -+ parport_splink_inc_use_count, -+ parport_splink_dec_use_count, -+ -+ parport_ieee1284_epp_write_data, -+ parport_ieee1284_epp_read_data, -+ parport_ieee1284_epp_write_addr, -+ parport_ieee1284_epp_read_addr, -+ -+ parport_ieee1284_ecp_write_data, -+ parport_ieee1284_ecp_read_data, -+ parport_ieee1284_ecp_write_addr, -+ -+ parport_ieee1284_write_compat, -+ parport_ieee1284_read_nibble, -+ parport_ieee1284_read_byte, -+}; -+ -+/* --- Initialisation code -------------------------------- */ -+ -+static struct parport *parport_splink_probe_port (unsigned long int base) -+{ -+ struct parport_pc_private *priv; -+ struct parport_operations *ops; -+ struct parport *p; -+ -+ if (check_mem_region(base, 3)) { -+ printk (KERN_DEBUG "parport (0x%lx): iomem region not available\n", base); -+ return NULL; -+ } -+ priv = kmalloc (sizeof (struct parport_pc_private), GFP_KERNEL); -+ if (!priv) { -+ printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base); -+ return NULL; -+ } -+ ops = kmalloc (sizeof (struct parport_operations), GFP_KERNEL); -+ if (!ops) { -+ printk (KERN_DEBUG "parport (0x%lx): no memory for ops!\n", -+ base); -+ kfree (priv); -+ return NULL; -+ } -+ memcpy (ops, &parport_splink_ops, sizeof (struct parport_operations)); -+ priv->ctr = 0xc; -+ priv->ctr_writable = 0xff; -+ -+ if (!(p = parport_register_port(base, PARPORT_IRQ_NONE, -+ PARPORT_DMA_NONE, ops))) { -+ printk (KERN_DEBUG "parport (0x%lx): registration failed!\n", -+ base); -+ kfree (priv); -+ kfree (ops); -+ return NULL; -+ } -+ -+ p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT; -+ p->size = (p->modes & PARPORT_MODE_EPP)?8:3; -+ p->private_data = priv; -+ -+ parport_proc_register(p); -+ request_mem_region (p->base, 3, p->name); -+ -+ /* Done probing. Now put the port into a sensible start-up state. */ -+ parport_splink_write_data(p, 0); -+ parport_splink_data_forward (p); -+ -+ /* Now that we've told the sharing engine about the port, and -+ found out its characteristics, let the high-level drivers -+ know about it. */ -+ parport_announce_port (p); -+ -+ DPRINTK(KERN_DEBUG "parport (0x%lx): init ok!\n", -+ base); -+ return p; -+} -+ -+static void parport_splink_unregister_port(struct parport *p) { -+ struct parport_pc_private *priv = p->private_data; -+ struct parport_operations *ops = p->ops; -+ -+ if (p->irq != PARPORT_IRQ_NONE) -+ free_irq(p->irq, p); -+ release_mem_region(p->base, 3); -+ parport_proc_unregister(p); -+ kfree (priv); -+ parport_unregister_port(p); -+ kfree (ops); -+} -+ -+ -+int parport_splink_init(void) -+{ -+ int ret; -+ -+ DPRINTK(KERN_DEBUG "parport_splink init called\n"); -+ parport_splink_setup_interrupt(); -+ ret = !parport_splink_probe_port(SPLINK_ADDRESS); -+ -+ return ret; -+} -+ -+void parport_splink_cleanup(void) { -+ struct parport *p = parport_enumerate(), *tmp; -+ DPRINTK(KERN_DEBUG "parport_splink cleanup called\n"); -+ if (p->size) { -+ if (p->modes & PARPORT_MODE_PCSPP) { -+ while(p) { -+ tmp = p->next; -+ parport_splink_unregister_port(p); -+ p = tmp; -+ } -+ } -+ } -+} -+ -+MODULE_AUTHOR("Nuno Grilo <nuno.grilo@netcabo.pt>"); -+MODULE_DESCRIPTION("Parport Driver for ASUS WL-500g router builtin Port"); -+MODULE_SUPPORTED_DEVICE("ASUS WL-500g builtin Parallel Port"); -+MODULE_LICENSE("GPL"); -+ -+module_init(parport_splink_init) -+module_exit(parport_splink_cleanup) -+ diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/bootinfo.h --- linux.old/include/asm-mips/bootinfo.h 2006-10-02 21:23:10.000000000 +0200 +++ linux.dev/include/asm-mips/bootinfo.h 2006-10-02 21:19:59.000000000 +0200 diff --git a/target/linux/brcm-2.4/patches/004-flash.patch b/target/linux/brcm-2.4/patches/004-flash.patch index de2d5b170f..91aa7e65c8 100644 --- a/target/linux/brcm-2.4/patches/004-flash.patch +++ b/target/linux/brcm-2.4/patches/004-flash.patch @@ -29,860 +29,6 @@ diff -urN linux.old/drivers/mtd/devices/Makefile linux.dev/drivers/mtd/devices/M obj-$(CONFIG_MTD_DOC1000) += doc1000.o obj-$(CONFIG_MTD_DOC2000) += doc2000.o obj-$(CONFIG_MTD_DOC2001) += doc2001.o -diff -urN linux.old/drivers/mtd/devices/sflash.c linux.dev/drivers/mtd/devices/sflash.c ---- linux.old/drivers/mtd/devices/sflash.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/mtd/devices/sflash.c 2006-06-21 21:41:24.000000000 +0200 -@@ -0,0 +1,298 @@ -+/* -+ * Broadcom SiliconBackplane chipcommon serial flash interface -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: sflash.c,v 1.1.1.3 2003/11/10 17:43:38 hyin Exp $ -+ */ -+ -+#include <linux/config.h> -+#include <linux/module.h> -+#include <linux/slab.h> -+#include <linux/ioport.h> -+#include <linux/mtd/compatmac.h> -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/partitions.h> -+#include <linux/errno.h> -+#include <linux/pci.h> -+#include <linux/delay.h> -+#include <asm/io.h> -+ -+#ifdef CONFIG_MTD_PARTITIONS -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/partitions.h> -+#include <linux/minix_fs.h> -+#include <linux/ext2_fs.h> -+#include <linux/romfs_fs.h> -+#include <linux/cramfs_fs.h> -+#include <linux/jffs2.h> -+#endif -+ -+#include <typedefs.h> -+#include <bcmdevs.h> -+#include <bcmutils.h> -+#include <osl.h> -+#include <bcmutils.h> -+#include <bcmnvram.h> -+#include <sbconfig.h> -+#include <sbchipc.h> -+#include <sflash.h> -+#include <trxhdr.h> -+ -+#ifdef CONFIG_MTD_PARTITIONS -+extern struct mtd_partition * init_mtd_partitions(struct mtd_info *mtd, size_t size); -+#endif -+ -+struct sflash_mtd { -+ chipcregs_t *cc; -+ struct semaphore lock; -+ struct mtd_info mtd; -+ struct mtd_erase_region_info regions[1]; -+}; -+ -+/* Private global state */ -+static struct sflash_mtd sflash; -+ -+static int -+sflash_mtd_poll(struct sflash_mtd *sflash, unsigned int offset, int timeout) -+{ -+ int now = jiffies; -+ int ret = 0; -+ -+ for (;;) { -+ if (!sflash_poll(sflash->cc, offset)) { -+ ret = 0; -+ break; -+ } -+ if (time_after(jiffies, now + timeout)) { -+ printk(KERN_ERR "sflash: timeout\n"); -+ ret = -ETIMEDOUT; -+ break; -+ } -+ if (current->need_resched) { -+ set_current_state(TASK_UNINTERRUPTIBLE); -+ schedule_timeout(timeout / 10); -+ } else -+ udelay(1); -+ } -+ -+ return ret; -+} -+ -+static int -+sflash_mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) -+{ -+ struct sflash_mtd *sflash = (struct sflash_mtd *) mtd->priv; -+ int bytes, ret = 0; -+ -+ /* Check address range */ -+ if (!len) -+ return 0; -+ if ((from + len) > mtd->size) -+ return -EINVAL; -+ -+ down(&sflash->lock); -+ -+ *retlen = 0; -+ while (len) { -+ if ((bytes = sflash_read(sflash->cc, (uint) from, len, buf)) < 0) { -+ ret = bytes; -+ break; -+ } -+ from += (loff_t) bytes; -+ len -= bytes; -+ buf += bytes; -+ *retlen += bytes; -+ } -+ -+ up(&sflash->lock); -+ -+ return ret; -+} -+ -+static int -+sflash_mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) -+{ -+ struct sflash_mtd *sflash = (struct sflash_mtd *) mtd->priv; -+ int bytes, ret = 0; -+ -+ /* Check address range */ -+ if (!len) -+ return 0; -+ if ((to + len) > mtd->size) -+ return -EINVAL; -+ -+ down(&sflash->lock); -+ -+ *retlen = 0; -+ while (len) { -+ if ((bytes = sflash_write(sflash->cc, (uint) to, len, buf)) < 0) { -+ ret = bytes; -+ break; -+ } -+ if ((ret = sflash_mtd_poll(sflash, (unsigned int) to, HZ / 10))) -+ break; -+ to += (loff_t) bytes; -+ len -= bytes; -+ buf += bytes; -+ *retlen += bytes; -+ } -+ -+ up(&sflash->lock); -+ -+ return ret; -+} -+ -+static int -+sflash_mtd_erase(struct mtd_info *mtd, struct erase_info *erase) -+{ -+ struct sflash_mtd *sflash = (struct sflash_mtd *) mtd->priv; -+ int i, j, ret = 0; -+ unsigned int addr, len; -+ -+ /* Check address range */ -+ if (!erase->len) -+ return 0; -+ if ((erase->addr + erase->len) > mtd->size) -+ return -EINVAL; -+ -+ addr = erase->addr; -+ len = erase->len; -+ -+ down(&sflash->lock); -+ -+ /* Ensure that requested region is aligned */ -+ for (i = 0; i < mtd->numeraseregions; i++) { -+ for (j = 0; j < mtd->eraseregions[i].numblocks; j++) { -+ if (addr == mtd->eraseregions[i].offset + mtd->eraseregions[i].erasesize * j && -+ len >= mtd->eraseregions[i].erasesize) { -+ if ((ret = sflash_erase(sflash->cc, addr)) < 0) -+ break; -+ if ((ret = sflash_mtd_poll(sflash, addr, 10 * HZ))) -+ break; -+ addr += mtd->eraseregions[i].erasesize; -+ len -= mtd->eraseregions[i].erasesize; -+ } -+ } -+ if (ret) -+ break; -+ } -+ -+ up(&sflash->lock); -+ -+ /* Set erase status */ -+ if (ret) -+ erase->state = MTD_ERASE_FAILED; -+ else -+ erase->state = MTD_ERASE_DONE; -+ -+ /* Call erase callback */ -+ if (erase->callback) -+ erase->callback(erase); -+ -+ return ret; -+} -+ -+#if LINUX_VERSION_CODE < 0x20212 && defined(MODULE) -+#define sflash_mtd_init init_module -+#define sflash_mtd_exit cleanup_module -+#endif -+ -+mod_init_t -+sflash_mtd_init(void) -+{ -+ struct pci_dev *pdev; -+ int ret = 0; -+ struct sflash *info; -+ uint bank, i; -+#ifdef CONFIG_MTD_PARTITIONS -+ struct mtd_partition *parts; -+#endif -+ -+ if (!(pdev = pci_find_device(VENDOR_BROADCOM, SB_CC, NULL))) { -+ printk(KERN_ERR "sflash: chipcommon not found\n"); -+ return -ENODEV; -+ } -+ -+ memset(&sflash, 0, sizeof(struct sflash_mtd)); -+ init_MUTEX(&sflash.lock); -+ -+ /* Map registers and flash base */ -+ if (!(sflash.cc = ioremap_nocache(pci_resource_start(pdev, 0), -+ pci_resource_len(pdev, 0)))) { -+ printk(KERN_ERR "sflash: error mapping registers\n"); -+ ret = -EIO; -+ goto fail; -+ } -+ -+ /* Initialize serial flash access */ -+ info = sflash_init(sflash.cc); -+ -+ if (!info) { -+ printk(KERN_ERR "sflash: found no supported devices\n"); -+ ret = -ENODEV; -+ goto fail; -+ } -+ -+ /* Setup banks */ -+ sflash.regions[0].offset = 0; -+ sflash.regions[0].erasesize = info->blocksize; -+ sflash.regions[0].numblocks = info->numblocks; -+ if (sflash.regions[0].erasesize > sflash.mtd.erasesize) -+ sflash.mtd.erasesize = sflash.regions[0].erasesize; -+ if (sflash.regions[0].erasesize * sflash.regions[0].numblocks) { -+ sflash.mtd.size += sflash.regions[0].erasesize * sflash.regions[0].numblocks; -+ } -+ sflash.mtd.numeraseregions = 1; -+ ASSERT(sflash.mtd.size == info->size); -+ -+ /* Register with MTD */ -+ sflash.mtd.name = "sflash"; -+ sflash.mtd.type = MTD_NORFLASH; -+ sflash.mtd.flags = MTD_CAP_NORFLASH; -+ sflash.mtd.eraseregions = sflash.regions; -+ sflash.mtd.module = THIS_MODULE; -+ sflash.mtd.erase = sflash_mtd_erase; -+ sflash.mtd.read = sflash_mtd_read; -+ sflash.mtd.write = sflash_mtd_write; -+ sflash.mtd.priv = &sflash; -+ -+#ifdef CONFIG_MTD_PARTITIONS -+ parts = init_mtd_partitions(&sflash.mtd, sflash.mtd.size); -+ for (i = 0; parts[i].name; i++); -+ ret = add_mtd_partitions(&sflash.mtd, parts, i); -+#else -+ ret = add_mtd_device(&sflash.mtd); -+#endif -+ if (ret) { -+ printk(KERN_ERR "sflash: add_mtd failed\n"); -+ goto fail; -+ } -+ -+ return 0; -+ -+ fail: -+ if (sflash.cc) -+ iounmap((void *) sflash.cc); -+ return ret; -+} -+ -+mod_exit_t -+sflash_mtd_exit(void) -+{ -+#ifdef CONFIG_MTD_PARTITIONS -+ del_mtd_partitions(&sflash.mtd); -+#else -+ del_mtd_device(&sflash.mtd); -+#endif -+ iounmap((void *) sflash.cc); -+} -+ -+module_init(sflash_mtd_init); -+module_exit(sflash_mtd_exit); -diff -urN linux.old/drivers/mtd/maps/bcm947xx-flash.c linux.dev/drivers/mtd/maps/bcm947xx-flash.c ---- linux.old/drivers/mtd/maps/bcm947xx-flash.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/mtd/maps/bcm947xx-flash.c 2006-06-23 18:08:46.000000000 +0200 -@@ -0,0 +1,548 @@ -+/* -+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> -+ * Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org> -+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) -+ * -+ * original functions for finding root filesystem from Mike Baker -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ * -+ * Copyright 2004, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * Flash mapping for BCM947XX boards -+ * -+ */ -+ -+#include <linux/module.h> -+#include <linux/types.h> -+#include <linux/kernel.h> -+#include <linux/wait.h> -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/map.h> -+#ifdef CONFIG_MTD_PARTITIONS -+#include <linux/mtd/partitions.h> -+#endif -+#include <linux/config.h> -+#include <linux/squashfs_fs.h> -+#include <linux/jffs2.h> -+#include <linux/crc32.h> -+#include <asm/io.h> -+ -+#include <typedefs.h> -+#include <osl.h> -+#include <bcmnvram.h> -+#include <bcmutils.h> -+#include <sbconfig.h> -+#include <sbchipc.h> -+#include <sbutils.h> -+#include <trxhdr.h> -+ -+/* Global SB handle */ -+extern void *bcm947xx_sbh; -+extern spinlock_t bcm947xx_sbh_lock; -+ -+/* Convenience */ -+#define sbh bcm947xx_sbh -+#define sbh_lock bcm947xx_sbh_lock -+ -+#define WINDOW_ADDR 0x1fc00000 -+#define WINDOW_SIZE 0x400000 -+#define BUSWIDTH 2 -+ -+static struct mtd_info *bcm947xx_mtd; -+ -+__u8 bcm947xx_map_read8(struct map_info *map, unsigned long ofs) -+{ -+ if (map->map_priv_2 == 1) -+ return __raw_readb(map->map_priv_1 + ofs); -+ -+ u16 val = __raw_readw(map->map_priv_1 + (ofs & ~1)); -+ if (ofs & 1) -+ return ((val >> 8) & 0xff); -+ else -+ return (val & 0xff); -+} -+ -+__u16 bcm947xx_map_read16(struct map_info *map, unsigned long ofs) -+{ -+ return __raw_readw(map->map_priv_1 + ofs); -+} -+ -+__u32 bcm947xx_map_read32(struct map_info *map, unsigned long ofs) -+{ -+ return __raw_readl(map->map_priv_1 + ofs); -+} -+ -+void bcm947xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) -+{ -+ if (len==1) { -+ memcpy_fromio(to, map->map_priv_1 + from, len); -+ } else { -+ int i; -+ u16 *dest = (u16 *) to; -+ u16 *src = (u16 *) (map->map_priv_1 + from); -+ for (i = 0; i < (len / 2); i++) { -+ dest[i] = src[i]; -+ } -+ if (len & 1) -+ *((u8 *)dest+len-1) = src[i] & 0xff; -+ } -+} -+ -+void bcm947xx_map_write8(struct map_info *map, __u8 d, unsigned long adr) -+{ -+ __raw_writeb(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void bcm947xx_map_write16(struct map_info *map, __u16 d, unsigned long adr) -+{ -+ __raw_writew(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void bcm947xx_map_write32(struct map_info *map, __u32 d, unsigned long adr) -+{ -+ __raw_writel(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void bcm947xx_map_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) -+{ -+ memcpy_toio(map->map_priv_1 + to, from, len); -+} -+ -+struct map_info bcm947xx_map = { -+ name: "Physically mapped flash", -+ size: WINDOW_SIZE, -+ buswidth: BUSWIDTH, -+ read8: bcm947xx_map_read8, -+ read16: bcm947xx_map_read16, -+ read32: bcm947xx_map_read32, -+ copy_from: bcm947xx_map_copy_from, -+ write8: bcm947xx_map_write8, -+ write16: bcm947xx_map_write16, -+ write32: bcm947xx_map_write32, -+ copy_to: bcm947xx_map_copy_to -+}; -+ -+#ifdef CONFIG_MTD_PARTITIONS -+ -+static struct mtd_partition bcm947xx_parts[] = { -+ { name: "cfe", offset: 0, size: 0, mask_flags: MTD_WRITEABLE, }, -+ { name: "linux", offset: 0, size: 0, }, -+ { name: "rootfs", offset: 0, size: 0, }, -+ { name: "nvram", offset: 0, size: 0, }, -+ { name: "OpenWrt", offset: 0, size: 0, }, -+ { name: NULL, }, -+}; -+ -+static int __init -+find_cfe_size(struct mtd_info *mtd, size_t size) -+{ -+ struct trx_header *trx; -+ unsigned char buf[512]; -+ int off; -+ size_t len; -+ int blocksize; -+ -+ trx = (struct trx_header *) buf; -+ -+ blocksize = mtd->erasesize; -+ if (blocksize < 0x10000) -+ blocksize = 0x10000; -+ -+ for (off = (128*1024); off < size; off += blocksize) { -+ memset(buf, 0xe5, sizeof(buf)); -+ -+ /* -+ * Read into buffer -+ */ -+ if (MTD_READ(mtd, off, sizeof(buf), &len, buf) || -+ len != sizeof(buf)) -+ continue; -+ -+ /* found a TRX header */ -+ if (le32_to_cpu(trx->magic) == TRX_MAGIC) { -+ goto found; -+ } -+ } -+ -+ printk(KERN_NOTICE -+ "%s: Couldn't find bootloader size\n", -+ mtd->name); -+ return -1; -+ -+ found: -+ printk(KERN_NOTICE "bootloader size: %d\n", off); -+ return off; -+ -+} -+ -+/* -+ * Copied from mtdblock.c -+ * -+ * Cache stuff... -+ * -+ * Since typical flash erasable sectors are much larger than what Linux's -+ * buffer cache can handle, we must implement read-modify-write on flash -+ * sectors for each block write requests. To avoid over-erasing flash sectors -+ * and to speed things up, we locally cache a whole flash sector while it is -+ * being written to until a different sector is required. -+ */ -+ -+static void erase_callback(struct erase_info *done) -+{ -+ wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv; -+ wake_up(wait_q); -+} -+ -+static int erase_write (struct mtd_info *mtd, unsigned long pos, -+ int len, const char *buf) -+{ -+ struct erase_info erase; -+ DECLARE_WAITQUEUE(wait, current); -+ wait_queue_head_t wait_q; -+ size_t retlen; -+ int ret; -+ -+ /* -+ * First, let's erase the flash block. -+ */ -+ -+ init_waitqueue_head(&wait_q); -+ erase.mtd = mtd; -+ erase.callback = erase_callback; -+ erase.addr = pos; -+ erase.len = len; -+ erase.priv = (u_long)&wait_q; -+ -+ set_current_state(TASK_INTERRUPTIBLE); -+ add_wait_queue(&wait_q, &wait); -+ -+ ret = MTD_ERASE(mtd, &erase); -+ if (ret) { -+ set_current_state(TASK_RUNNING); -+ remove_wait_queue(&wait_q, &wait); -+ printk (KERN_WARNING "erase of region [0x%lx, 0x%x] " -+ "on \"%s\" failed\n", -+ pos, len, mtd->name); -+ return ret; -+ } -+ -+ schedule(); /* Wait for erase to finish. */ -+ remove_wait_queue(&wait_q, &wait); -+ -+ /* -+ * Next, writhe data to flash. -+ */ -+ -+ ret = MTD_WRITE (mtd, pos, len, &retlen, buf); -+ if (ret) -+ return ret; -+ if (retlen != len) -+ return -EIO; -+ return 0; -+} -+ -+ -+ -+ -+static int __init -+find_root(struct mtd_info *mtd, size_t size, struct mtd_partition *part) -+{ -+ struct trx_header trx, *trx2; -+ unsigned char buf[512], *block; -+ int off, blocksize; -+ u32 i, crc = ~0; -+ size_t len; -+ struct squashfs_super_block *sb = (struct squashfs_super_block *) buf; -+ -+ blocksize = mtd->erasesize; -+ if (blocksize < 0x10000) -+ blocksize = 0x10000; -+ -+ for (off = (128*1024); off < size; off += blocksize) { -+ memset(&trx, 0xe5, sizeof(trx)); -+ -+ /* -+ * Read into buffer -+ */ -+ if (MTD_READ(mtd, off, sizeof(trx), &len, (char *) &trx) || -+ len != sizeof(trx)) -+ continue; -+ -+ /* found a TRX header */ -+ if (le32_to_cpu(trx.magic) == TRX_MAGIC) { -+ part->offset = le32_to_cpu(trx.offsets[2]) ? : -+ le32_to_cpu(trx.offsets[1]); -+ part->size = le32_to_cpu(trx.len); -+ -+ part->size -= part->offset; -+ part->offset += off; -+ -+ goto found; -+ } -+ } -+ -+ printk(KERN_NOTICE -+ "%s: Couldn't find root filesystem\n", -+ mtd->name); -+ return -1; -+ -+ found: -+ if (part->size == 0) -+ return 0; -+ -+ if (MTD_READ(mtd, part->offset, sizeof(buf), &len, buf) || len != sizeof(buf)) -+ return 0; -+ -+ if (*((__u32 *) buf) == SQUASHFS_MAGIC) { -+ printk(KERN_INFO "%s: Filesystem type: squashfs, size=0x%x\n", mtd->name, (u32) sb->bytes_used); -+ -+ /* Update the squashfs partition size based on the superblock info */ -+ part->size = sb->bytes_used; -+ len = part->offset + part->size; -+ len += (mtd->erasesize - 1); -+ len &= ~(mtd->erasesize - 1); -+ part->size = len - part->offset; -+ } else if (*((__u16 *) buf) == JFFS2_MAGIC_BITMASK) { -+ printk(KERN_INFO "%s: Filesystem type: jffs2\n", mtd->name); -+ -+ /* Move the squashfs outside of the trx */ -+ part->size = 0; -+ } else { -+ printk(KERN_INFO "%s: Filesystem type: unknown\n", mtd->name); -+ return 0; -+ } -+ -+ if (trx.len != part->offset + part->size - off) { -+ /* Update the trx offsets and length */ -+ trx.len = part->offset + part->size - off; -+ -+ /* Update the trx crc32 */ -+ for (i = (u32) &(((struct trx_header *)NULL)->flag_version); i <= trx.len; i += sizeof(buf)) { -+ if (MTD_READ(mtd, off + i, sizeof(buf), &len, buf) || len != sizeof(buf)) -+ return 0; -+ crc = crc32_le(crc, buf, min(sizeof(buf), trx.len - i)); -+ } -+ trx.crc32 = crc; -+ -+ /* read first eraseblock from the trx */ -+ trx2 = block = kmalloc(mtd->erasesize, GFP_KERNEL); -+ if (MTD_READ(mtd, off, mtd->erasesize, &len, block) || len != mtd->erasesize) { -+ printk("Error accessing the first trx eraseblock\n"); -+ return 0; -+ } -+ -+ printk("Updating TRX offsets and length:\n"); -+ printk("old trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx2->offsets[0], trx2->offsets[1], trx2->offsets[2], trx2->len, trx2->crc32); -+ printk("new trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx.offsets[0], trx.offsets[1], trx.offsets[2], trx.len, trx.crc32); -+ -+ /* Write updated trx header to the flash */ -+ memcpy(block, &trx, sizeof(trx)); -+ if (mtd->unlock) -+ mtd->unlock(mtd, off, mtd->erasesize); -+ erase_write(mtd, off, mtd->erasesize, block); -+ if (mtd->sync) -+ mtd->sync(mtd); -+ kfree(block); -+ printk("Done\n"); -+ } -+ -+ return part->size; -+} -+ -+struct mtd_partition * __init -+init_mtd_partitions(struct mtd_info *mtd, size_t size) -+{ -+ int cfe_size; -+ -+ if ((cfe_size = find_cfe_size(mtd,size)) < 0) -+ return NULL; -+ -+ /* boot loader */ -+ bcm947xx_parts[0].offset = 0; -+ bcm947xx_parts[0].size = cfe_size; -+ -+ /* nvram */ -+ if (cfe_size != 384 * 1024) { -+ bcm947xx_parts[3].offset = size - ROUNDUP(NVRAM_SPACE, mtd->erasesize); -+ bcm947xx_parts[3].size = ROUNDUP(NVRAM_SPACE, mtd->erasesize); -+ } else { -+ /* nvram (old 128kb config partition on netgear wgt634u) */ -+ bcm947xx_parts[3].offset = bcm947xx_parts[0].size; -+ bcm947xx_parts[3].size = ROUNDUP(NVRAM_SPACE, mtd->erasesize); -+ } -+ -+ /* linux (kernel and rootfs) */ -+ if (cfe_size != 384 * 1024) { -+ bcm947xx_parts[1].offset = bcm947xx_parts[0].size; -+ bcm947xx_parts[1].size = bcm947xx_parts[3].offset - -+ bcm947xx_parts[1].offset; -+ } else { -+ /* do not count the elf loader, which is on one block */ -+ bcm947xx_parts[1].offset = bcm947xx_parts[0].size + -+ bcm947xx_parts[3].size + mtd->erasesize; -+ bcm947xx_parts[1].size = size - -+ bcm947xx_parts[0].size - -+ (2*bcm947xx_parts[3].size) - -+ mtd->erasesize; -+ } -+ -+ /* find and size rootfs */ -+ if (find_root(mtd,size,&bcm947xx_parts[2])==0) { -+ /* entirely jffs2 */ -+ bcm947xx_parts[4].name = NULL; -+ bcm947xx_parts[2].size = size - bcm947xx_parts[2].offset - -+ bcm947xx_parts[3].size; -+ } else { -+ /* legacy setup */ -+ /* calculate leftover flash, and assign it to the jffs2 partition */ -+ if (cfe_size != 384 * 1024) { -+ bcm947xx_parts[4].offset = bcm947xx_parts[2].offset + -+ bcm947xx_parts[2].size; -+ if ((bcm947xx_parts[4].offset % mtd->erasesize) > 0) { -+ bcm947xx_parts[4].offset += mtd->erasesize - -+ (bcm947xx_parts[4].offset % mtd->erasesize); -+ } -+ bcm947xx_parts[4].size = bcm947xx_parts[3].offset - -+ bcm947xx_parts[4].offset; -+ } else { -+ bcm947xx_parts[4].offset = bcm947xx_parts[2].offset + -+ bcm947xx_parts[2].size; -+ if ((bcm947xx_parts[4].offset % mtd->erasesize) > 0) { -+ bcm947xx_parts[4].offset += mtd->erasesize - -+ (bcm947xx_parts[4].offset % mtd->erasesize); -+ } -+ bcm947xx_parts[4].size = size - bcm947xx_parts[3].size - -+ bcm947xx_parts[4].offset; -+ } -+ } -+ -+ return bcm947xx_parts; -+} -+ -+#endif -+ -+ -+mod_init_t init_bcm947xx_map(void) -+{ -+ ulong flags; -+ uint coreidx; -+ chipcregs_t *cc; -+ uint32 fltype; -+ uint window_addr = 0, window_size = 0; -+ size_t size; -+ int ret = 0; -+#ifdef CONFIG_MTD_PARTITIONS -+ struct mtd_partition *parts; -+ int i; -+#endif -+ -+ spin_lock_irqsave(&sbh_lock, flags); -+ coreidx = sb_coreidx(sbh); -+ -+ /* Check strapping option if chipcommon exists */ -+ if ((cc = sb_setcore(sbh, SB_CC, 0))) { -+ fltype = readl(&cc->capabilities) & CAP_FLASH_MASK; -+ if (fltype == PFLASH) { -+ bcm947xx_map.map_priv_2 = 1; -+ window_addr = 0x1c000000; -+ bcm947xx_map.size = window_size = 32 * 1024 * 1024; -+ if ((readl(&cc->flash_config) & CC_CFG_DS) == 0) -+ bcm947xx_map.buswidth = 1; -+ } -+ } else { -+ fltype = PFLASH; -+ bcm947xx_map.map_priv_2 = 0; -+ window_addr = WINDOW_ADDR; -+ window_size = WINDOW_SIZE; -+ } -+ -+ sb_setcoreidx(sbh, coreidx); -+ spin_unlock_irqrestore(&sbh_lock, flags); -+ -+ if (fltype != PFLASH) { -+ printk(KERN_ERR "pflash: found no supported devices\n"); -+ ret = -ENODEV; -+ goto fail; -+ } -+ -+ bcm947xx_map.map_priv_1 = (unsigned long) ioremap(window_addr, window_size); -+ -+ if (!bcm947xx_map.map_priv_1) { -+ printk(KERN_ERR "Failed to ioremap\n"); -+ return -EIO; -+ } -+ -+ if (!(bcm947xx_mtd = do_map_probe("cfi_probe", &bcm947xx_map))) { -+ printk(KERN_ERR "pflash: cfi_probe failed\n"); -+ iounmap((void *)bcm947xx_map.map_priv_1); -+ return -ENXIO; -+ } -+ -+ bcm947xx_mtd->module = THIS_MODULE; -+ -+ size = bcm947xx_mtd->size; -+ -+ printk(KERN_NOTICE "Flash device: 0x%x at 0x%x\n", size, window_addr); -+ -+#ifdef CONFIG_MTD_PARTITIONS -+ parts = init_mtd_partitions(bcm947xx_mtd, size); -+ for (i = 0; parts[i].name; i++); -+ ret = add_mtd_partitions(bcm947xx_mtd, parts, i); -+ if (ret) { -+ printk(KERN_ERR "Flash: add_mtd_partitions failed\n"); -+ goto fail; -+ } -+#endif -+ -+ return 0; -+ -+ fail: -+ if (bcm947xx_mtd) -+ map_destroy(bcm947xx_mtd); -+ if (bcm947xx_map.map_priv_1) -+ iounmap((void *) bcm947xx_map.map_priv_1); -+ bcm947xx_map.map_priv_1 = 0; -+ return ret; -+} -+ -+mod_exit_t cleanup_bcm947xx_map(void) -+{ -+#ifdef CONFIG_MTD_PARTITIONS -+ del_mtd_partitions(bcm947xx_mtd); -+#endif -+ map_destroy(bcm947xx_mtd); -+ iounmap((void *) bcm947xx_map.map_priv_1); -+ bcm947xx_map.map_priv_1 = 0; -+} -+ -+module_init(init_bcm947xx_map); -+module_exit(cleanup_bcm947xx_map); diff -urN linux.old/drivers/mtd/maps/Config.in linux.dev/drivers/mtd/maps/Config.in --- linux.old/drivers/mtd/maps/Config.in 2006-06-22 17:35:39.000000000 +0200 +++ linux.dev/drivers/mtd/maps/Config.in 2006-06-21 21:41:24.000000000 +0200 diff --git a/target/linux/brcm-2.4/patches/009-wrt54g3g_pcmcia.patch b/target/linux/brcm-2.4/patches/009-wrt54g3g_pcmcia.patch index 0759eeb40e..52febdf0cc 100644 --- a/target/linux/brcm-2.4/patches/009-wrt54g3g_pcmcia.patch +++ b/target/linux/brcm-2.4/patches/009-wrt54g3g_pcmcia.patch @@ -1,37 +1,3 @@ -diff -urN linux.old/arch/mips/bcm947xx/pcibios.c linux.dev/arch/mips/bcm947xx/pcibios.c ---- linux.old/arch/mips/bcm947xx/pcibios.c 2006-04-07 21:20:59.000000000 +0200 -+++ linux.dev/arch/mips/bcm947xx/pcibios.c 2006-04-08 03:17:59.000000000 +0200 -@@ -157,6 +157,7 @@ - - static u32 pci_iobase = 0x100; - static u32 pci_membase = SB_PCI_DMA; -+static u32 pcmcia_membase = 0x40004000; - - void __init - pcibios_fixup_bus(struct pci_bus *b) -@@ -188,7 +189,7 @@ - /* Fix up resource bases */ - for (pos = 0; pos < 6; pos++) { - res = &d->resource[pos]; -- base = (res->flags & IORESOURCE_IO) ? &pci_iobase : &pci_membase; -+ base = (res->flags & IORESOURCE_IO) ? &pci_iobase : ((b->number == 2) ? &pcmcia_membase : &pci_membase); - if (res->end) { - size = res->end - res->start + 1; - if (*base & (size - 1)) -@@ -308,7 +309,12 @@ - where = PCI_BASE_ADDRESS_0 + (resource * 4); - size = res->end - res->start; - pci_read_config_dword(dev, where, ®); -- reg = (reg & size) | (((u32)(res->start - root->start)) & ~size); -+ -+ if (dev->bus->number == 1) -+ reg = (reg & size) | (((u32)(res->start - root->start)) & ~size); -+ else -+ reg = res->start; -+ - pci_write_config_dword(dev, where, reg); - } - diff -urN linux.old/drivers/pcmcia/yenta.c linux.dev/drivers/pcmcia/yenta.c --- linux.old/drivers/pcmcia/yenta.c 2004-11-17 12:54:21.000000000 +0100 +++ linux.dev/drivers/pcmcia/yenta.c 2006-04-11 17:47:45.000000000 +0200 |