aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm-2.4/base-files/etc
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm-2.4/base-files/etc')
-rw-r--r--target/linux/brcm-2.4/base-files/etc/diag.sh28
-rwxr-xr-xtarget/linux/brcm-2.4/base-files/etc/init.d/netconfig248
-rwxr-xr-xtarget/linux/brcm-2.4/base-files/etc/init.d/wmacfixup33
3 files changed, 0 insertions, 309 deletions
diff --git a/target/linux/brcm-2.4/base-files/etc/diag.sh b/target/linux/brcm-2.4/base-files/etc/diag.sh
deleted file mode 100644
index 3b08554c64..0000000000
--- a/target/linux/brcm-2.4/base-files/etc/diag.sh
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-
-set_led() {
- local led="$1"
- local state="$2"
- [ -f "/proc/diag/led/$1" ] && echo "$state" > "/proc/diag/led/$1"
-}
-
-set_state() {
- case "$1" in
- preinit)
- set_led dmz 1
- set_led diag 1
- set_led power 0
- ;;
- failsafe)
- set_led diag f
- set_led power f
- set_led dmz f
- ;;
- done)
- set_led dmz 0
- set_led diag 0
- set_led power 1
- ;;
- esac
-}
diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
deleted file mode 100755
index d7839b6b49..0000000000
--- a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
+++ /dev/null
@@ -1,248 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006 OpenWrt.org
-
-START=05
-
-start() {
- [ -e /etc/config/network ] && {
- local batch
-
- config_cb() {
- case "$1" in
- switch)
- option_cb() {
- case "$1" in
- vlan[0-9]|vlan1[0-5])
- local id="${1#vlan}"
- local ports="${2%\*}"
- append batch "delete network.eth0.${1}${N}"
- append batch "set network.eth0_${id}=switch_vlan${N}"
- append batch "set network.eth0_${id}.device=eth0${N}"
- append batch "set network.eth0_${id}.vlan=${id}${N}"
- append batch "set network.eth0_${id}.ports='${ports}'${N}"
- ;;
- esac
- }
- ;;
- switch_vlan)
- option_cb() { :; }
- batch=""
- ;;
- esac
- }
-
- config_load network
-
- [ -n "$batch" ] && {
- logger -t netconfig "migrating switch config to new format ..."
- echo "$batch${N}commit network" | uci batch
- }
-
- exit 0
- }
-
- mkdir -p /etc/config
-
- (
- if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
- # WGT634u
- echo boardtype=wgt634u
- else
- strings "$(find_mtd_part nvram)"
- fi
- ) | awk '
- function p(cfgname, name) {
- if (c[name] != "") print " option " cfgname " \"" c[name] "\""
- }
-
- function vlan(id, name) {
- if (c[name] != "") {
- print "config switch_vlan eth0_" id
- print " option device \"eth0\""
- print " option vlan " id
- print " option ports \"" c[name] "\""
- print ""
- }
- }
-
- function macinc(mac, maca, i, result) {
- split(mac, maca, ":")
- for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
- if (++maca[6] > 0xff) {
- maca[5]++
- maca[6] = 0
- }
- for (i = 1; i <= 6; i++) {
- if (i != 1) result = result ":"
- result = result sprintf("%02x", maca[i])
- }
- return result
- }
-
- BEGIN {
- FS="="
- c["lan_ifname"]="eth0.0"
- c["wan_ifname"]="eth0.1"
- c["vlan0ports"]="1 2 3 4 5"
- c["vlan1ports"]="0 5"
- getline < "/proc/diag/model"
- model=$0
- for (i = 0; i < 6; i++) {
- if (mac_check != "") mac_check = mac_check ":"
- mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
- }
- }
-
- ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
- nvram[$1] = $2
- }
-
- END {
- if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
- c["wan_ifname"] = ""
- c["lan_ifname"] = "eth1"
- }
- if (model == "ASUS WL-330gE") {
- c["wan_ifname"] = ""
- c["lan_ifname"] = "eth0"
- c["vlan0ports"] = ""
- c["vlan1ports"] = ""
- }
- if ((model == "ASUS WL-500g") || (model == "Microsoft MN-700")) {
- c["wan_ifname"] = "eth1"
- c["lan_ifname"] = "eth0"
- }
- if ((model == "ASUS WL-500g Premium V2") || (model == "Dell TrueMobile 2300 v2") || (model == "Buffalo WHR-G125")) {
- c["vlan0ports"] = "0 1 2 3 5"
- c["vlan1ports"] = "4 5"
- }
- if (model == "Dell TrueMobile 2300") {
- c["lan_ifname"] = "eth0"
- c["wan_ifname"] = "eth1"
- c["vlan0ports"] = "0 1 2 3 4 5u"
- c["vlan1ports"] = ""
- }
- if (nvram["boardtype"] == "bcm94710r4") {
- # Toshiba WRC-1000
- c["lan_ifname"] = "eth0"
- c["wan_ifname"] = "eth1"
- }
- if ((nvram["boardtype"] == "wgt634u") || (nvram["boardtype"] == "0x0467")) {
- c["vlan0ports"] = "0 1 2 3 5"
- c["vlan1ports"] = "4 5"
- }
- if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
- if (nvram["boardnum"] == "45") {
- # WL-500gP
- c["vlan0ports"] = "1 2 3 4 5"
- c["vlan1ports"] = "0 5"
- } else {
- # Generic BCM94704
- c["vlan0ports"] = "0 1 2 3 4 5u"
- c["vlan1ports"] = ""
- c["lan_ifname"] = "eth0"
- c["wan_ifname"] = "eth1"
-
- # MAC addresses on 4704 tend to be screwed up. Add a workaround here
- if (nvram["et0macaddr"] ~ mac_check) {
- c["lan_macaddr"] = nvram["et0macaddr"]
- c["wan_macaddr"] = macinc(c["lan_macaddr"])
- }
- }
- }
- # Buffalo WBR-B11 and Buffalo WBR-G54
- if (nvram["boardtype"] == "bcm94710ap") {
- c["vlan0ports"] = "0 1 2 3 4 5u"
- c["vlan1ports"] = ""
- c["lan_ifname"] = "eth0"
- c["wan_ifname"] = "eth1"
- }
- # generic broadcom 4705/4785 processor with 5397 switch?
- # EXCEPT Linksys WRT300N V1.1
- if ((nvram["boardtype"] == "0x478") && \
- (model != "Linksys WRT300N V1.1")) {
- c["vlan0ports"] = "1 2 3 4 8*"
- c["vlan1ports"] = "0 8"
- }
-
- # WAP54G
- if ((nvram["boardnum"] == "2") || \
- (nvram["boardnum"] == "1024")) {
- c["lan_ifname"]="eth0"
- c["wan_ifname"]=""
- }
-
- # Sitecom WL-105b
- if ((nvram["boardum"] == "2") && \
- (nvram["GemtekPmonVer"] == "1")) {
- c["lan_ifname"]="eth0"
- c["wan_ifname"]=""
- }
-
- # ASUS WL-700gE
- # These are actually same as defaults above. For some reason this script applies
- # Generic BCM94704 settings instead so we revert to proper settings here.
- # Hopefully someone will fix this properly soon.
- if (model == "ASUS WL-700gE") {
- c["lan_ifname"]="eth0.0"
- c["wan_ifname"]="eth0.1"
- c["vlan0ports"]="1 2 3 4 5"
- c["vlan1ports"]="0 5"
- }
-
- if (model == "Motorola WR850G V2/V3") {
- c["vlan0ports"]="0 1 2 3 5"
- c["vlan1ports"]="4 5"
- }
- if (model == "ASUS WL-500W") {
- c["lan_ifname"] = "eth0"
- c["wan_ifname"] = "eth1"
- c["vlan0ports"] = "0 1 2 3 4 5u"
- c["vlan1ports"] = ""
- }
- if (model == "OvisLink WL-1600GL") {
- c["lan_ifname"] = "eth0.0"
- c["wan_ifname"] = "eth0.1"
- c["vlan0ports"] = "0 1 2 3 5"
- c["vlan1ports"] = "4 5"
- }
-
- if (c["vlan0ports"] || c["vlan1ports"]) {
- print "#### VLAN configuration "
- print "config switch eth0"
- print " option enable 1"
- print ""
- vlan(0, "vlan0ports")
- vlan(1, "vlan1ports")
- }
- print "#### Loopback configuration"
- print "config interface loopback"
- print " option ifname \"lo\""
- print " option proto static"
- print " option ipaddr 127.0.0.1"
- print " option netmask 255.0.0.0"
- print ""
- print ""
- print "#### LAN configuration"
- print "config interface lan"
- print " option type bridge"
- p("ifname", "lan_ifname")
- p("macaddr", "lan_macaddr")
- print " option proto static"
- print " option ipaddr 192.168.1.1"
- print " option netmask 255.255.255.0"
- print ""
- print ""
- if (c["wan_ifname"]) {
- print "#### WAN configuration"
- print "config interface wan"
- p("ifname", "wan_ifname")
- p("macaddr", "wan_macaddr")
- print " option proto dhcp"
- } else {
- print "#### WAN configuration (disabled)"
- print "#config interface wan"
- print "# option proto dhcp"
- }
- }' > /etc/config/network
-}
diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/wmacfixup b/target/linux/brcm-2.4/base-files/etc/init.d/wmacfixup
deleted file mode 100755
index ee1b752201..0000000000
--- a/target/linux/brcm-2.4/base-files/etc/init.d/wmacfixup
+++ /dev/null
@@ -1,33 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2010 OpenWrt.org
-
-START=41
-
-boot() {
- [ -d /sys/class/ieee80211 ] || exit
-
- commit=0
-
- fixup_wmac() {
- local cfg="$1"
- local cfmac
-
- config_get cfmac "$cfg" macaddr
-
- [ "$cfmac" != "00:90:4c:5f:00:2a" ] || {
- local nvmac="$(nvram get il0macaddr 2>/dev/null)"
- [ -n "$nvmac" ] && [ "$nvmac != "$cfmac ] && {
- uci set wireless.$cfg.macaddr="$nvmac"
- commit=1
- }
- }
- }
-
- config_load wireless
- config_foreach fixup_wmac wifi-device
-
- [ "$commit" = 1 ] && uci commit wireless
-}
-
-start() { :; }
-stop() { :; }