diff options
Diffstat (limited to 'target/linux/bmips')
26 files changed, 3517 insertions, 2188 deletions
diff --git a/target/linux/bmips/config-5.10 b/target/linux/bmips/config-5.10 index 86c71aaeef..cfe8888f80 100644 --- a/target/linux/bmips/config-5.10 +++ b/target/linux/bmips/config-5.10 @@ -190,7 +190,6 @@ CONFIG_PINCTRL_BCM6328=y CONFIG_PINCTRL_BCM6358=y CONFIG_PINCTRL_BCM6362=y CONFIG_PINCTRL_BCM6368=y -CONFIG_PINCTRL_BCM63XX=y CONFIG_PM=y CONFIG_PM_CLK=y CONFIG_PM_GENERIC_DOMAINS=y diff --git a/target/linux/bmips/dts/bcm6318.dtsi b/target/linux/bmips/dts/bcm6318.dtsi index ba12390814..d19f8ec964 100644 --- a/target/linux/bmips/dts/bcm6318.dtsi +++ b/target/linux/bmips/dts/bcm6318.dtsi @@ -143,112 +143,113 @@ mask = <0x1>; }; - pinctrl: pin-controller@10000080 { - compatible = "brcm,bcm6318-pinctrl"; - reg = <0x10000080 0x08>, - <0x10000088 0x08>, - <0x10000098 0x04>, - <0x1000009c 0x0c>, - <0x100000d4 0x18>; - reg-names = "dirout", "dat", "mode", "mux", "pad"; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-parent = <&ext_intc>; - interrupts = <0 0>, <1 0>; - interrupt-names = "gpio33", "gpio34"; - - pinctrl_ephy0_spd_led: ephy0_spd_led { - function = "ephy0_spd_led"; - pins = "gpio0"; - }; + gpio: syscon@10000080 { + compatible = "syscon", "simple-mfd"; + reg = <0x10000080 0x80>; + native-endian; - pinctrl_ephy1_spd_led: ephy1_spd_led { - function = "ephy1_spd_led"; - pins = "gpio1"; - }; + pinctrl: pin-controller { + compatible = "brcm,bcm6318-pinctrl"; - pinctrl_ephy2_spd_led: ephy2_spd_led { - function = "ephy2_spd_led"; - pins = "gpio2"; - }; + gpio-controller; + #gpio-cells = <2>; - pinctrl_ephy3_spd_led: ephy3_spd_led { - function = "ephy3_spd_led"; - pins = "gpio3"; - }; + interrupts-extended = <&ext_intc 0 0>, + <&ext_intc 1 0>; + interrupt-names = "gpio33", + "gpio34"; - pinctrl_ephy0_act_led: ephy0_act_led { - function = "ephy0_act_led"; - pins = "gpio4"; - }; + pinctrl_ephy0_spd_led: ephy0_spd_led { + function = "ephy0_spd_led"; + pins = "gpio0"; + }; - pinctrl_ephy1_act_led: ephy1_act_led { - function = "ephy1_act_led"; - pins = "gpio5"; - }; + pinctrl_ephy1_spd_led: ephy1_spd_led { + function = "ephy1_spd_led"; + pins = "gpio1"; + }; - pinctrl_ephy2_act_led: ephy2_act_led { - function = "ephy2_act_led"; - pins = "gpio6"; - }; + pinctrl_ephy2_spd_led: ephy2_spd_led { + function = "ephy2_spd_led"; + pins = "gpio2"; + }; - pinctrl_ephy3_act_led: ephy3_act_led { - function = "ephy3_act_led"; - pins = "gpio7"; - }; + pinctrl_ephy3_spd_led: ephy3_spd_led { + function = "ephy3_spd_led"; + pins = "gpio3"; + }; - pinctrl_serial_led: serial_led { - pinctrl_serial_led_data: serial_led_data { - function = "serial_led_data"; + pinctrl_ephy0_act_led: ephy0_act_led { + function = "ephy0_act_led"; + pins = "gpio4"; + }; + + pinctrl_ephy1_act_led: ephy1_act_led { + function = "ephy1_act_led"; + pins = "gpio5"; + }; + + pinctrl_ephy2_act_led: ephy2_act_led { + function = "ephy2_act_led"; pins = "gpio6"; }; - pinctrl_serial_led_clk: serial_led_clk { - function = "serial_led_clk"; + pinctrl_ephy3_act_led: ephy3_act_led { + function = "ephy3_act_led"; pins = "gpio7"; }; - }; - pinctrl_inet_act_led: inet_act_led { - function = "inet_act_led"; - pins = "gpio8"; - }; + pinctrl_serial_led: serial_led { + pinctrl_serial_led_data: serial_led_data { + function = "serial_led_data"; + pins = "gpio6"; + }; - pinctrl_inet_fail_led: inet_fail_led { - function = "inet_fail_led"; - pins = "gpio9"; - }; + pinctrl_serial_led_clk: serial_led_clk { + function = "serial_led_clk"; + pins = "gpio7"; + }; + }; - pinctrl_dsl_led: dsl_led { - function = "dsl_led"; - pins = "gpio10"; - }; + pinctrl_inet_act_led: inet_act_led { + function = "inet_act_led"; + pins = "gpio8"; + }; - pinctrl_post_fail_led: post_fail_led { - function = "post_fail_led"; - pins = "gpio11"; - }; + pinctrl_inet_fail_led: inet_fail_led { + function = "inet_fail_led"; + pins = "gpio9"; + }; - pinctrl_wlan_wps_led: wlan_wps_led { - function = "wlan_wps_led"; - pins = "gpio12"; - }; + pinctrl_dsl_led: dsl_led { + function = "dsl_led"; + pins = "gpio10"; + }; - pinctrl_usb_pwron: usb_pwron { - function = "usb_pwron"; - pins = "gpio13"; - }; + pinctrl_post_fail_led: post_fail_led { + function = "post_fail_led"; + pins = "gpio11"; + }; - pinctrl_usb_device_led: usb_device_led { - function = "usb_device_led"; - pins = "gpio13"; - }; + pinctrl_wlan_wps_led: wlan_wps_led { + function = "wlan_wps_led"; + pins = "gpio12"; + }; - pinctrl_usb_active: usb_active { - function = "usb_active"; - pins = "gpio40"; + pinctrl_usb_pwron: usb_pwron { + function = "usb_pwron"; + pins = "gpio13"; + }; + + pinctrl_usb_device_led: usb_device_led { + function = "usb_device_led"; + pins = "gpio13"; + }; + + pinctrl_usb_active: usb_active { + function = "usb_active"; + pins = "gpio40"; + }; }; }; diff --git a/target/linux/bmips/dts/bcm63268.dtsi b/target/linux/bmips/dts/bcm63268.dtsi index be98bf181e..538b43754b 100644 --- a/target/linux/bmips/dts/bcm63268.dtsi +++ b/target/linux/bmips/dts/bcm63268.dtsi @@ -147,131 +147,134 @@ timeout-sec = <30>; }; - pinctrl: pin-controller@100000c0 { - compatible = "brcm,bcm63268-pinctrl"; - reg = <0x100000c0 0x8>, - <0x100000c8 0x8>, - <0x100000d0 0x4>, - <0x100000d8 0x4>, - <0x100000dc 0x4>, - <0x100000f8 0x4>; - reg-names = "dirout", "dat", "led", "mode", - "ctrl", "basemode"; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-parent = <&ext_intc>; - interrupts = <0 0>, <1 0>, <2 0>, <3 0>; - interrupt-names = "gpio32", "gpio33", "gpio34", "gpio35"; - - pinctrl_serial_led: serial_led { - pinctrl_serial_led_clk: serial_led_clk { - function = "serial_led_clk"; - pins = "gpio0"; + gpio: syscon@100000c0 { + compatible = "syscon", "simple-mfd"; + reg = <0x100000c0 0x80>; + native-endian; + + pinctrl: pin-controller { + compatible = "brcm,bcm63268-pinctrl"; + + gpio-controller; + #gpio-cells = <2>; + + interrupts-extended = <&ext_intc 0 0>, + <&ext_intc 1 0>, + <&ext_intc 2 0>, + <&ext_intc 3 0>; + interrupt-names = "gpio32", + "gpio33", + "gpio34", + "gpio35"; + + pinctrl_serial_led: serial_led { + pinctrl_serial_led_clk: serial_led_clk { + function = "serial_led_clk"; + pins = "gpio0"; + }; + + pinctrl_serial_led_data: serial_led_data { + function = "serial_led_data"; + pins = "gpio1"; + }; }; - pinctrl_serial_led_data: serial_led_data { - function = "serial_led_data"; - pins = "gpio1"; + pinctrl_hsspi_cs4: hsspi_cs4 { + function = "hsspi_cs4"; + pins = "gpio16"; }; - }; - pinctrl_hsspi_cs4: hsspi_cs4 { - function = "hsspi_cs4"; - pins = "gpio16"; - }; + pinctrl_hsspi_cs5: hsspi_cs5 { + function = "hsspi_cs5"; + pins = "gpio17"; + }; - pinctrl_hsspi_cs5: hsspi_cs5 { - function = "hsspi_cs5"; - pins = "gpio17"; - }; + pinctrl_hsspi_cs6: hsspi_cs6 { + function = "hsspi_cs6"; + pins = "gpio8"; + }; - pinctrl_hsspi_cs6: hsspi_cs6 { - function = "hsspi_cs6"; - pins = "gpio8"; - }; + pinctrl_hsspi_cs7: hsspi_cs7 { + function = "hsspi_cs7"; + pins = "gpio9"; + }; - pinctrl_hsspi_cs7: hsspi_cs7 { - function = "hsspi_cs7"; - pins = "gpio9"; - }; + pinctrl_adsl_spi: adsl_spi { + pinctrl_adsl_spi_miso: adsl_spi_miso { + function = "adsl_spi_miso"; + pins = "gpio18"; + }; - pinctrl_adsl_spi: adsl_spi { - pinctrl_adsl_spi_miso: adsl_spi_miso { - function = "adsl_spi_miso"; - pins = "gpio18"; + pinctrl_adsl_spi_mosi: adsl_spi_mosi { + function = "adsl_spi_mosi"; + pins = "gpio19"; + }; }; - pinctrl_adsl_spi_mosi: adsl_spi_mosi { - function = "adsl_spi_mosi"; - pins = "gpio19"; + pinctrl_vreq_clk: vreq_clk { + function = "vreq_clk"; + pins = "gpio22"; }; - }; - pinctrl_vreq_clk: vreq_clk { - function = "vreq_clk"; - pins = "gpio22"; - }; - - pinctrl_pcie_clkreq_b: pcie_clkreq_b { - function = "pcie_clkreq_b"; - pins = "gpio23"; - }; + pinctrl_pcie_clkreq_b: pcie_clkreq_b { + function = "pcie_clkreq_b"; + pins = "gpio23"; + }; - pinctrl_robosw_led_clk: robosw_led_clk { - function = "robosw_led_clk"; - pins = "gpio30"; - }; + pinctrl_robosw_led_clk: robosw_led_clk { + function = "robosw_led_clk"; + pins = "gpio30"; + }; - pinctrl_robosw_led_data: robosw_led_data { - function = "robosw_led_data"; - pins = "gpio31"; - }; + pinctrl_robosw_led_data: robosw_led_data { + function = "robosw_led_data"; + pins = "gpio31"; + }; - pinctrl_nand: nand { - function = "nand"; - group = "nand_grp"; - }; + pinctrl_nand: nand { + function = "nand"; + group = "nand_grp"; + }; - pinctrl_gpio35_alt: gpio35_alt { - function = "gpio35_alt"; - pin = "gpio35"; - }; + pinctrl_gpio35_alt: gpio35_alt { + function = "gpio35_alt"; + pin = "gpio35"; + }; - pinctrl_dectpd: dectpd { - function = "dectpd"; - group = "dectpd_grp"; - }; + pinctrl_dectpd: dectpd { + function = "dectpd"; + group = "dectpd_grp"; + }; - pinctrl_vdsl_phy_override_0: vdsl_phy_override_0 { - function = "vdsl_phy_override_0"; - group = "vdsl_phy_override_0_grp"; - }; + pinctrl_vdsl_phy_override_0: vdsl_phy_override_0 { + function = "vdsl_phy_override_0"; + group = "vdsl_phy_override_0_grp"; + }; - pinctrl_vdsl_phy_override_1: vdsl_phy_override_1 { - function = "vdsl_phy_override_1"; - group = "vdsl_phy_override_1_grp"; - }; + pinctrl_vdsl_phy_override_1: vdsl_phy_override_1 { + function = "vdsl_phy_override_1"; + group = "vdsl_phy_override_1_grp"; + }; - pinctrl_vdsl_phy_override_2: vdsl_phy_override_2 { - function = "vdsl_phy_override_2"; - group = "vdsl_phy_override_2_grp"; - }; + pinctrl_vdsl_phy_override_2: vdsl_phy_override_2 { + function = "vdsl_phy_override_2"; + group = "vdsl_phy_override_2_grp"; + }; - pinctrl_vdsl_phy_override_3: vdsl_phy_override_3 { - function = "vdsl_phy_override_3"; - group = "vdsl_phy_override_3_grp"; - }; + pinctrl_vdsl_phy_override_3: vdsl_phy_override_3 { + function = "vdsl_phy_override_3"; + group = "vdsl_phy_override_3_grp"; + }; - pinctrl_dsl_gpio8: dsl_gpio8 { - function = "dsl_gpio8"; - group = "dsl_gpio8"; - }; + pinctrl_dsl_gpio8: dsl_gpio8 { + function = "dsl_gpio8"; + group = "dsl_gpio8"; + }; - pinctrl_dsl_gpio9: dsl_gpio9 { - function = "dsl_gpio9"; - group = "dsl_gpio9"; + pinctrl_dsl_gpio9: dsl_gpio9 { + function = "dsl_gpio9"; + group = "dsl_gpio9"; + }; }; }; diff --git a/target/linux/bmips/dts/bcm6328.dtsi b/target/linux/bmips/dts/bcm6328.dtsi index 07ae773fe4..f4f86c381e 100644 --- a/target/linux/bmips/dts/bcm6328.dtsi +++ b/target/linux/bmips/dts/bcm6328.dtsi @@ -146,97 +146,102 @@ mask = <0x1>; }; - pinctrl: pin-controller@10000080 { - compatible = "brcm,bcm6328-pinctrl"; - reg = <0x10000080 0x8>, - <0x10000088 0x8>, - <0x10000098 0x4>, - <0x1000009c 0xc>; - reg-names = "dirout", "dat", "mode", "mux"; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-parent = <&ext_intc>; - interrupts = <3 0>, <2 0>, <0 0>, <1 0>; - interrupt-names = "gpio12", "gpio15", - "gpio23", "gpio24"; - - pinctrl_serial_led: serial_led { - pinctrl_serial_led_data: serial_led_data { - function = "serial_led_data"; - pins = "gpio6"; - }; + gpio: syscon@10000080 { + compatible = "syscon", "simple-mfd"; + reg = <0x10000080 0x80>; + native-endian; - pinctrl_serial_led_clk: serial_led_clk { - function = "serial_led_clk"; - pins = "gpio7"; + pinctrl: pin-controller { + compatible = "brcm,bcm6328-pinctrl"; + + gpio-controller; + #gpio-cells = <2>; + + interrupts-extended = <&ext_intc 3 0>, + <&ext_intc 2 0>, + <&ext_intc 1 0>, + <&ext_intc 0 0>; + interrupt-names = "gpio12", + "gpio15", + "gpio23", + "gpio24"; + + pinctrl_serial_led: serial_led { + pinctrl_serial_led_data: serial_led_data { + function = "serial_led_data"; + pins = "gpio6"; + }; + + pinctrl_serial_led_clk: serial_led_clk { + function = "serial_led_clk"; + pins = "gpio7"; + }; }; - }; - pinctrl_inet_act_led: inet_act_led { - function = "inet_act_led"; - pins = "gpio11"; - }; + pinctrl_inet_act_led: inet_act_led { + function = "inet_act_led"; + pins = "gpio11"; + }; - pinctrl_pcie_clkreq: pcie_clkreq { - function = "pcie_clkreq"; - pins = "gpio16"; - }; + pinctrl_pcie_clkreq: pcie_clkreq { + function = "pcie_clkreq"; + pins = "gpio16"; + }; - pinctrl_ephy0_spd_led: ephy0_spd_led { - function = "led"; - pins = "gpio17"; - }; + pinctrl_ephy0_spd_led: ephy0_spd_led { + function = "led"; + pins = "gpio17"; + }; - pinctrl_ephy1_spd_led: ephy1_spd_led { - function = "led"; - pins = "gpio18"; - }; + pinctrl_ephy1_spd_led: ephy1_spd_led { + function = "led"; + pins = "gpio18"; + }; - pinctrl_ephy2_spd_led: ephy2_spd_led { - function = "led"; - pins = "gpio19"; - }; + pinctrl_ephy2_spd_led: ephy2_spd_led { + function = "led"; + pins = "gpio19"; + }; - pinctrl_ephy3_spd_led: ephy3_spd_led { - function = "led"; - pins = "gpio20"; - }; + pinctrl_ephy3_spd_led: ephy3_spd_led { + function = "led"; + pins = "gpio20"; + }; - pinctrl_ephy0_act_led: ephy0_act_led { - function = "ephy0_act_led"; - pins = "gpio25"; - }; + pinctrl_ephy0_act_led: ephy0_act_led { + function = "ephy0_act_led"; + pins = "gpio25"; + }; - pinctrl_ephy1_act_led: ephy1_act_led { - function = "ephy1_act_led"; - pins = "gpio26"; - }; + pinctrl_ephy1_act_led: ephy1_act_led { + function = "ephy1_act_led"; + pins = "gpio26"; + }; - pinctrl_ephy2_act_led: ephy2_act_led { - function = "ephy2_act_led"; - pins = "gpio27"; - }; + pinctrl_ephy2_act_led: ephy2_act_led { + function = "ephy2_act_led"; + pins = "gpio27"; + }; - pinctrl_ephy3_act_led: ephy3_act_led { - function = "ephy3_act_led"; - pins = "gpio28"; - }; + pinctrl_ephy3_act_led: ephy3_act_led { + function = "ephy3_act_led"; + pins = "gpio28"; + }; - pinctrl_hsspi_cs1: hsspi_cs1 { - function = "hsspi_cs1"; - pins = "hsspi_cs1"; - }; + pinctrl_hsspi_cs1: hsspi_cs1 { + function = "hsspi_cs1"; + pins = "hsspi_cs1"; + }; - pinctrl_usb_port1_device: usb_port1_device { - function = "usb_device_port"; - pins = "usb_port1"; - }; + pinctrl_usb_port1_device: usb_port1_device { + function = "usb_device_port"; + pins = "usb_port1"; + }; - pinctrl_usb_port1_host: usb_port1_host { - function = "usb_host_port"; - pins = "usb_port1"; + pinctrl_usb_port1_host: usb_port1_host { + function = "usb_host_port"; + pins = "usb_port1"; + }; }; }; diff --git a/target/linux/bmips/dts/bcm6358.dtsi b/target/linux/bmips/dts/bcm6358.dtsi index 83cfb0ad90..8e2c9fa0ee 100644 --- a/target/linux/bmips/dts/bcm6358.dtsi +++ b/target/linux/bmips/dts/bcm6358.dtsi @@ -158,76 +158,77 @@ timeout-sec = <30>; }; - pinctrl: pin-controller@fffe0080 { - compatible = "brcm,bcm6358-pinctrl"; - reg = <0xfffe0080 0x8>, - <0xfffe0088 0x8>; - reg-names = "dirout", "dat", "mode"; - brcm,gpiomode = <&gpiomode>; - - gpio-controller; - #gpio-cells = <2>; - - interrupts-extended = <&ext_intc1 0 0>, - <&ext_intc1 1 0>, - <&ext_intc0 0 0>, - <&ext_intc0 1 0>, - <&ext_intc0 2 0>, - <&ext_intc0 3 0>; - interrupt-names = "gpio32", "gpio33", "gpio34", "gpio35", - "gpio36", "gpio37"; - - pinctrl_ebi_cs: ebi_cs { - function = "ebi_cs"; - groups = "ebi_cs_grp"; - }; - - pinctrl_uart1: uart1 { - function = "uart1"; - groups = "uart1_grp"; - }; - - pinctrl_serial_led: serial_led { - function = "serial_led"; - groups = "serial_led_grp"; - }; - - pinctrl_legacy_led: legacy_led { - function = "legacy_led"; - groups = "legacy_led_grp"; - }; - - pinctrl_led: led { - function = "led"; - groups = "led_grp"; - }; - - pinctrl_spi_cs_23: spi_cs { - function = "spi_cs"; - groups = "spi_cs_grp"; - }; - - pinctrl_utopia: utopia { - function = "utopia"; - groups = "utopia_grp"; - }; - - pinctrl_pwm_syn_clk: pwm_syn_clk { - function = "pwm_syn_clk"; - groups = "pwm_syn_clk_grp"; - }; + gpio: syscon@fffe0080 { + compatible = "syscon", "simple-mfd"; + reg = <0xfffe0080 0x50>; + native-endian; - pinctrl_sys_irq: sys_irq { - function = "sys_irq"; - groups = "sys_irq_grp"; + pinctrl: pin-controller { + compatible = "brcm,bcm6358-pinctrl"; + + gpio-controller; + #gpio-cells = <2>; + + interrupts-extended = <&ext_intc1 0 0>, + <&ext_intc1 1 0>, + <&ext_intc0 0 0>, + <&ext_intc0 1 0>, + <&ext_intc0 2 0>, + <&ext_intc0 3 0>; + interrupt-names = "gpio32", + "gpio33", + "gpio34", + "gpio35", + "gpio36", + "gpio37"; + + pinctrl_ebi_cs: ebi_cs { + function = "ebi_cs"; + groups = "ebi_cs_grp"; + }; + + pinctrl_uart1: uart1 { + function = "uart1"; + groups = "uart1_grp"; + }; + + pinctrl_serial_led: serial_led { + function = "serial_led"; + groups = "serial_led_grp"; + }; + + pinctrl_legacy_led: legacy_led { + function = "legacy_led"; + groups = "legacy_led_grp"; + }; + + pinctrl_led: led { + function = "led"; + groups = "led_grp"; + }; + + pinctrl_spi_cs_23: spi_cs { + function = "spi_cs"; + groups = "spi_cs_grp"; + }; + + pinctrl_utopia: utopia { + function = "utopia"; + groups = "utopia_grp"; + }; + + pinctrl_pwm_syn_clk: pwm_syn_clk { + function = "pwm_syn_clk"; + groups = "pwm_syn_clk_grp"; + }; + + pinctrl_sys_irq: sys_irq { + function = "sys_irq"; + groups = "sys_irq_grp"; + }; }; }; - gpiomode: gpiomode@fffe0098 { - compatible = "brcm,bcm6358-gpiomode", "syscon"; - reg = <0xfffe0098 0x4>; - }; - leds: led-controller@fffe00d0 { #address-cells = <1>; #size-cells = <0>; diff --git a/target/linux/bmips/dts/bcm6362.dtsi b/target/linux/bmips/dts/bcm6362.dtsi index 724ce5a2f8..d531ed4fe5 100644 --- a/target/linux/bmips/dts/bcm6362.dtsi +++ b/target/linux/bmips/dts/bcm6362.dtsi @@ -147,174 +147,176 @@ timeout-sec = <30>; }; - pinctrl: pin-controller@10000080 { - compatible = "brcm,bcm6362-pinctrl"; - reg = <0x10000080 0x8>, - <0x10000088 0x8>, - <0x10000090 0x4>, - <0x10000098 0x4>, - <0x1000009c 0x4>, - <0x100000b8 0x4>; - reg-names = "dirout", "dat", "led", - "mode", "ctrl", "basemode"; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-parent = <&ext_intc>; - interrupts = <0 0>, <1 0>, <2 0>, <3 0>; - interrupt-names = "gpio24", "gpio25", - "gpio26", "gpio27"; - - pinctrl_usb_device_led: usb_device_led { - function = "usb_device_led"; - pins = "gpio0"; - }; + gpio: syscon@10000080 { + compatible = "syscon", "simple-mfd"; + reg = <0x10000080 0x80>; + native-endian; - pinctrl_sys_irq: sys_irq { - function = "sys_irq"; - pins = "gpio1"; - }; + pinctrl: pin-controller { + compatible = "brcm,bcm6362-pinctrl"; - pinctrl_serial_led: serial_led { - pinctrl_serial_led_clk: serial_led_clk { - function = "serial_led_clk"; - pins = "gpio2"; - }; + gpio-controller; + #gpio-cells = <2>; - pinctrl_serial_led_data: serial_led_data { - function = "serial_led_data"; - pins = "gpio3"; - }; - }; + interrupts-extended = <&ext_intc 0 0>, + <&ext_intc 1 0>, + <&ext_intc 2 0>, + <&ext_intc 3 0>; + interrupt-names = "gpio24", + "gpio25", + "gpio26", + "gpio27"; - pinctrl_robosw_led_data: robosw_led_data { - function = "robosw_led_data"; - pins = "gpio4"; - }; + pinctrl_usb_device_led: usb_device_led { + function = "usb_device_led"; + pins = "gpio0"; + }; - pinctrl_robosw_led_clk: robosw_led_clk { - function = "robosw_led_clk"; - pins = "gpio5"; - }; + pinctrl_sys_irq: sys_irq { + function = "sys_irq"; + pins = "gpio1"; + }; - pinctrl_robosw_led0: robosw_led0 { - function = "robosw_led0"; - pins = "gpio6"; - }; + pinctrl_serial_led: serial_led { + pinctrl_serial_led_clk: serial_led_clk { + function = "serial_led_clk"; + pins = "gpio2"; + }; - pinctrl_robosw_led1: robosw_led1 { - function = "robosw_led1"; - pins = "gpio7"; - }; + pinctrl_serial_led_data: serial_led_data { + function = "serial_led_data"; + pins = "gpio3"; + }; + }; - pinctrl_inet_led: inet_led { - function = "inet_led"; - pins = "gpio8"; - }; + pinctrl_robosw_led_data: robosw_led_data { + function = "robosw_led_data"; + pins = "gpio4"; + }; - pinctrl_spi_cs2: spi_cs2 { - function = "spi_cs2"; - pins = "gpio9"; - }; + pinctrl_robosw_led_clk: robosw_led_clk { + function = "robosw_led_clk"; + pins = "gpio5"; + }; - pinctrl_spi_cs3: spi_cs3 { - function = "spi_cs3"; - pins = "gpio10"; - }; + pinctrl_robosw_led0: robosw_led0 { + function = "robosw_led0"; + pins = "gpio6"; + }; - pinctrl_ntr_pulse: ntr_pulse { - function = "ntr_pulse"; - pins = "gpio11"; - }; + pinctrl_robosw_led1: robosw_led1 { + function = "robosw_led1"; + pins = "gpio7"; + }; - pinctrl_uart1_scts: uart1_scts { - function = "uart1_scts"; - pins = "gpio12"; - }; + pinctrl_inet_led: inet_led { + function = "inet_led"; + pins = "gpio8"; + }; - pinctrl_uart1_srts: uart1_srts { - function = "uart1_srts"; - pins = "gpio13"; - }; + pinctrl_spi_cs2: spi_cs2 { + function = "spi_cs2"; + pins = "gpio9"; + }; - pinctrl_uart1: uart1 { - pinctrl_uart1_sdin: uart1_sdin { - function = "uart1_sdin"; - pins = "gpio14"; + pinctrl_spi_cs3: spi_cs3 { + function = "spi_cs3"; + pins = "gpio10"; }; - pinctrl_uart1_sdout: uart1_sdout { - function = "uart1_sdout"; - pins = "gpio15"; + pinctrl_ntr_pulse: ntr_pulse { + function = "ntr_pulse"; + pins = "gpio11"; }; - }; - pinctrl_adsl_spi: adsl_spi { - pinctrl_adsl_spi_miso: adsl_spi_miso { - function = "adsl_spi_miso"; - pins = "gpio16"; + pinctrl_uart1_scts: uart1_scts { + function = "uart1_scts"; + pins = "gpio12"; }; - pinctrl_adsl_spi_mosi: adsl_spi_mosi { - function = "adsl_spi_mosi"; - pins = "gpio17"; + pinctrl_uart1_srts: uart1_srts { + function = "uart1_srts"; + pins = "gpio13"; }; - pinctrl_adsl_spi_clk: adsl_spi_clk { - function = "adsl_spi_clk"; - pins = "gpio18"; + pinctrl_uart1: uart1 { + pinctrl_uart1_sdin: uart1_sdin { + function = "uart1_sdin"; + pins = "gpio14"; + }; + + pinctrl_uart1_sdout: uart1_sdout { + function = "uart1_sdout"; + pins = "gpio15"; + }; }; - pinctrl_adsl_spi_cs: adsl_spi_cs { - function = "adsl_spi_cs"; - pins = "gpio19"; + pinctrl_adsl_spi: adsl_spi { + pinctrl_adsl_spi_miso: adsl_spi_miso { + function = "adsl_spi_miso"; + pins = "gpio16"; + }; + + pinctrl_adsl_spi_mosi: adsl_spi_mosi { + function = "adsl_spi_mosi"; + pins = "gpio17"; + }; + + pinctrl_adsl_spi_clk: adsl_spi_clk { + function = "adsl_spi_clk"; + pins = "gpio18"; + }; + + pinctrl_adsl_spi_cs: adsl_spi_cs { + function = "adsl_spi_cs"; + pins = "gpio19"; + }; }; - }; - pinctrl_ephy0_led: ephy0_led { - function = "ephy0_led"; - pins = "gpio20"; - }; + pinctrl_ephy0_led: ephy0_led { + function = "ephy0_led"; + pins = "gpio20"; + }; - pinctrl_ephy1_led: ephy1_led { - function = "ephy1_led"; - pins = "gpio21"; - }; + pinctrl_ephy1_led: ephy1_led { + function = "ephy1_led"; + pins = "gpio21"; + }; - pinctrl_ephy2_led: ephy2_led { - function = "ephy2_led"; - pins = "gpio22"; - }; + pinctrl_ephy2_led: ephy2_led { + function = "ephy2_led"; + pins = "gpio22"; + }; - pinctrl_ephy3_led: ephy3_led { - function = "ephy3_led"; - pins = "gpio23"; - }; + pinctrl_ephy3_led: ephy3_led { + function = "ephy3_led"; + pins = "gpio23"; + }; - pinctrl_ext_irq0: ext_irq0 { - function = "ext_irq0"; - pins = "gpio24"; - }; + pinctrl_ext_irq0: ext_irq0 { + function = "ext_irq0"; + pins = "gpio24"; + }; - pinctrl_ext_irq1: ext_irq1 { - function = "ext_irq1"; - pins = "gpio25"; - }; + pinctrl_ext_irq1: ext_irq1 { + function = "ext_irq1"; + pins = "gpio25"; + }; - pinctrl_ext_irq2: ext_irq2 { - function = "ext_irq2"; - pins = "gpio26"; - }; + pinctrl_ext_irq2: ext_irq2 { + function = "ext_irq2"; + pins = "gpio26"; + }; - pinctrl_ext_irq3: ext_irq3 { - function = "ext_irq3"; - pins = "gpio27"; - }; + pinctrl_ext_irq3: ext_irq3 { + function = "ext_irq3"; + pins = "gpio27"; + }; - pinctrl_nand: nand { - function = "nand"; - group = "nand_grp"; + pinctrl_nand: nand { + function = "nand"; + group = "nand_grp"; + }; }; }; diff --git a/target/linux/bmips/dts/bcm6368.dtsi b/target/linux/bmips/dts/bcm6368.dtsi index babd8c7385..0b434c5c01 100644 --- a/target/linux/bmips/dts/bcm6368.dtsi +++ b/target/linux/bmips/dts/bcm6368.dtsi @@ -149,185 +149,190 @@ timeout-sec = <30>; }; - pinctrl: pin-controller@10000080 { - compatible = "brcm,bcm6368-pinctrl"; - reg = <0x10000080 0x8>, - <0x10000088 0x8>, - <0x10000098 0x4>; - reg-names = "dirout", "dat", "mode"; - brcm,gpiobasemode = <&gpiobasemode>; - - gpio-controller; - #gpio-cells = <2>; - - interrupts-extended = <&ext_intc1 0 0>, - <&ext_intc1 1 0>, - <&ext_intc0 0 0>, - <&ext_intc0 1 0>, - <&ext_intc0 2 0>, - <&ext_intc0 3 0>; - interrupt-names = "gpio32", "gpio33", "gpio34", "gpio35", - "gpio36", "gpio37"; - - pinctrl_analog_afe_0: analog_afe_0 { - function = "analog_afe_0"; - pins = "gpio0"; - }; - - pinctrl_analog_afe_1: analog_afe_1 { - function = "analog_afe_1"; - pins = "gpio1"; - }; - - pinctrl_sys_irq: sys_irq { - function = "sys_irq"; - pins = "gpio2"; - }; + gpio: syscon@10000080 { + compatible = "syscon", "simple-mfd"; + reg = <0x10000080 0x80>; + native-endian; - pinctrl_serial_led: serial_led { - pinctrl_serial_led_data: serial_led_data { - function = "serial_led_data"; - pins = "gpio3"; + pinctrl: pin-controller { + compatible = "brcm,bcm6368-pinctrl"; + + gpio-controller; + #gpio-cells = <2>; + + interrupts-extended = <&ext_intc1 0 0>, + <&ext_intc1 1 0>, + <&ext_intc0 0 0>, + <&ext_intc0 1 0>, + <&ext_intc0 2 0>, + <&ext_intc0 3 0>; + interrupt-names = "gpio32", + "gpio33", + "gpio34", + "gpio35", + "gpio36", + "gpio37"; + + pinctrl_analog_afe_0: analog_afe_0 { + function = "analog_afe_0"; + pins = "gpio0"; }; - pinctrl_serial_led_clk: serial_led_clk { - function = "serial_led_clk"; - pins = "gpio4"; + pinctrl_analog_afe_1: analog_afe_1 { + function = "analog_afe_1"; + pins = "gpio1"; }; - }; - - pinctrl_inet_led: inet_led { - function = "inet_led"; - pins = "gpio5"; - }; - - pinctrl_ephy0_led: ephy0_led { - function = "ephy0_led"; - pins = "gpio6"; - }; - pinctrl_ephy1_led: ephy1_led { - function = "ephy1_led"; - pins = "gpio7"; - }; - - pinctrl_ephy2_led: ephy2_led { - function = "ephy2_led"; - pins = "gpio8"; - }; - - pinctrl_ephy3_led: ephy3_led { - function = "ephy3_led"; - pins = "gpio9"; - }; + pinctrl_sys_irq: sys_irq { + function = "sys_irq"; + pins = "gpio2"; + }; - pinctrl_robosw_led_data: robosw_led_data { - function = "robosw_led_data"; - pins = "gpio10"; - }; + pinctrl_serial_led: serial_led { + pinctrl_serial_led_data: serial_led_data { + function = "serial_led_data"; + pins = "gpio3"; + }; - pinctrl_robosw_led_clk: robosw_led_clk { - function = "robosw_led_clk"; - pins = "gpio11"; - }; + pinctrl_serial_led_clk: serial_led_clk { + function = "serial_led_clk"; + pins = "gpio4"; + }; + }; - pinctrl_robosw_led0: robosw_led0 { - function = "robosw_led0"; - pins = "gpio12"; - }; + pinctrl_inet_led: inet_led { + function = "inet_led"; + pins = "gpio5"; + }; - pinctrl_robosw_led1: robosw_led1 { - function = "robosw_led1"; - pins = "gpio13"; - }; + pinctrl_ephy0_led: ephy0_led { + function = "ephy0_led"; + pins = "gpio6"; + }; - pinctrl_usb_device_led: usb_device_led { - function = "usb_device_led"; - pins = "gpio14"; - }; + pinctrl_ephy1_led: ephy1_led { + function = "ephy1_led"; + pins = "gpio7"; + }; - pinctrl_pci: pci { - pinctrl_pci_req1: pci_req1 { - function = "pci_req1"; - pins = "gpio16"; + pinctrl_ephy2_led: ephy2_led { + function = "ephy2_led"; + pins = "gpio8"; }; - pinctrl_pci_gnt1: pci_gnt1 { - function = "pci_gnt1"; - pins = "gpio17"; + pinctrl_ephy3_led: ephy3_led { + function = "ephy3_led"; + pins = "gpio9"; }; - pinctrl_pci_intb: pci_intb { - function = "pci_intb"; - pins = "gpio18"; + pinctrl_robosw_led_data: robosw_led_data { + function = "robosw_led_data"; + pins = "gpio10"; }; - pinctrl_pci_req0: pci_req0 { - function = "pci_req0"; - pins = "gpio19"; + pinctrl_robosw_led_clk: robosw_led_clk { + function = "robosw_led_clk"; + pins = "gpio11"; }; - pinctrl_pci_gnt0: pci_gnt0 { - function = "pci_gnt0"; - pins = "gpio20"; + pinctrl_robosw_led0: robosw_led0 { + function = "robosw_led0"; + pins = "gpio12"; }; - }; - pinctrl_pcmcia: pcmcia { - pinctrl_pcmcia_cd1: pcmcia_cd1 { - function = "pcmcia_cd1"; - pins = "gpio22"; + pinctrl_robosw_led1: robosw_led1 { + function = "robosw_led1"; + pins = "gpio13"; }; - pinctrl_pcmcia_cd2: pcmcia_cd2 { - function = "pcmcia_cd2"; - pins = "gpio23"; + pinctrl_usb_device_led: usb_device_led { + function = "usb_device_led"; + pins = "gpio14"; }; - pinctrl_pcmcia_vs1: pcmcia_vs1 { - function = "pcmcia_vs1"; - pins = "gpio24"; + pinctrl_pci: pci { + pinctrl_pci_req1: pci_req1 { + function = "pci_req1"; + pins = "gpio16"; + }; + + pinctrl_pci_gnt1: pci_gnt1 { + function = "pci_gnt1"; + pins = "gpio17"; + }; + + pinctrl_pci_intb: pci_intb { + function = "pci_intb"; + pins = "gpio18"; + }; + + pinctrl_pci_req0: pci_req0 { + function = "pci_req0"; + pins = "gpio19"; + }; + + pinctrl_pci_gnt0: pci_gnt0 { + function = "pci_gnt0"; + pins = "gpio20"; + }; }; - pinctrl_pcmcia_vs2: pcmcia_vs2 { - function = "pcmcia_vs2"; - pins = "gpio25"; + pinctrl_pcmcia: pcmcia { + pinctrl_pcmcia_cd1: pcmcia_cd1 { + function = "pcmcia_cd1"; + pins = "gpio22"; + }; + + pinctrl_pcmcia_cd2: pcmcia_cd2 { + function = "pcmcia_cd2"; + pins = "gpio23"; + }; + + pinctrl_pcmcia_vs1: pcmcia_vs1 { + function = "pcmcia_vs1"; + pins = "gpio24"; + }; + + pinctrl_pcmcia_vs2: pcmcia_vs2 { + function = "pcmcia_vs2"; + pins = "gpio25"; + }; }; - }; - pinctrl_ebi_cs2: ebi_cs2 { - function = "ebi_cs2"; - pins = "gpio26"; - }; + pinctrl_ebi_cs2: ebi_cs2 { + function = "ebi_cs2"; + pins = "gpio26"; + }; - pinctrl_ebi_cs3: ebi_cs3 { - function = "ebi_cs2"; - pins = "gpio27"; - }; + pinctrl_ebi_cs3: ebi_cs3 { + function = "ebi_cs3"; + pins = "gpio27"; + }; - pinctrl_spi_cs2: spi_cs2 { - function = "spi_cs2"; - pins = "gpio28"; - }; + pinctrl_spi_cs2: spi_cs2 { + function = "spi_cs2"; + pins = "gpio28"; + }; - pinctrl_spi_cs3: spi_cs3 { - function = "spi_cs3"; - pins = "gpio29"; - }; + pinctrl_spi_cs3: spi_cs3 { + function = "spi_cs3"; + pins = "gpio29"; + }; - pinctrl_spi_cs4: spi_cs4 { - function = "spi_cs4"; - pins = "gpio30"; - }; + pinctrl_spi_cs4: spi_cs4 { + function = "spi_cs4"; + pins = "gpio30"; + }; - pinctrl_spi_cs5: spi_cs5 { - function = "spi_cs5"; - pins = "gpio31"; - }; + pinctrl_spi_cs5: spi_cs5 { + function = "spi_cs5"; + pins = "gpio31"; + }; - pinctrl_uart1: uart1 { - function = "uart1"; - group = "uart1_grp"; + pinctrl_uart1: uart1 { + function = "uart1"; + group = "uart1_grp"; + }; }; }; diff --git a/target/linux/bmips/patches-5.10/400-Documentation-add-BCM6328-pincontroller-binding-docu.patch b/target/linux/bmips/patches-5.10/400-Documentation-add-BCM6328-pincontroller-binding-docu.patch new file mode 100644 index 0000000000..4ad97ad1e0 --- /dev/null +++ b/target/linux/bmips/patches-5.10/400-Documentation-add-BCM6328-pincontroller-binding-docu.patch @@ -0,0 +1,182 @@ +From 3b6d70e7bae0dbba02435c53f878a042d6d4bd4d Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com> +Date: Wed, 27 Jul 2016 11:33:56 +0200 +Subject: [PATCH 01/12] Documentation: add BCM6328 pincontroller binding + documentation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add binding documentation for the pincontrol core found in BCM6328 SoCs. + +Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> +Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> +--- + .../pinctrl/brcm,bcm6328-pinctrl.yaml | 161 ++++++++++++++++++ + 1 file changed, 161 insertions(+) + create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml +@@ -0,0 +1,161 @@ ++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6328-pinctrl.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Broadcom BCM6328 pin controller ++ ++maintainers: ++ - Álvaro Fernández Rojas <noltari@gmail.com> ++ - Jonas Gorski <jonas.gorski@gmail.com> ++ ++description: |+ ++ The pin controller node should be the child of a syscon node. ++ ++ Refer to the the bindings described in ++ Documentation/devicetree/bindings/mfd/syscon.yaml ++ ++properties: ++ compatible: ++ const: brcm,bcm6328-pinctrl ++ ++ gpio-controller: true ++ ++ '#gpio-cells': ++ description: ++ Specifies the pin number and flags, as defined in ++ include/dt-bindings/gpio/gpio.h ++ const: 2 ++ ++ interrupts-extended: ++ description: ++ One interrupt per each of the 4 GPIO ports supported by the controller, ++ sorted by port number ascending order. ++ minItems: 4 ++ maxItems: 4 ++ ++patternProperties: ++ '^.*$': ++ if: ++ type: object ++ then: ++ properties: ++ function: ++ $ref: "/schemas/types.yaml#/definitions/string" ++ enum: [ serial_led_data, serial_led_clk, inet_act_led, pcie_clkreq, ++ led, ephy0_act_led, ephy1_act_led, ephy2_act_led, ++ ephy3_act_led, hsspi_cs1, usb_device_port, usb_host_port ] ++ ++ pins: ++ $ref: "/schemas/types.yaml#/definitions/string" ++ enum: [ gpio6, gpio7, gpio11, gpio16, gpio17, gpio18, gpio19, ++ gpio20, gpio25, gpio26, gpio27, gpio28, hsspi_cs1, ++ usb_port1 ] ++ ++required: ++ - compatible ++ - gpio-controller ++ - '#gpio-cells' ++ ++additionalProperties: false ++ ++examples: ++ - | ++ gpio@10000080 { ++ compatible = "syscon", "simple-mfd"; ++ reg = <0x10000080 0x80>; ++ ++ pinctrl: pinctrl { ++ compatible = "brcm,bcm6328-pinctrl"; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ interrupts-extended = <&ext_intc 3 0>, ++ <&ext_intc 2 0>, ++ <&ext_intc 1 0>, ++ <&ext_intc 0 0>; ++ interrupt-names = "gpio12", ++ "gpio15", ++ "gpio23", ++ "gpio24"; ++ ++ pinctrl_serial_led: serial_led { ++ pinctrl_serial_led_data: serial_led_data { ++ function = "serial_led_data"; ++ pins = "gpio6"; ++ }; ++ ++ pinctrl_serial_led_clk: serial_led_clk { ++ function = "serial_led_clk"; ++ pins = "gpio7"; ++ }; ++ }; ++ ++ pinctrl_inet_act_led: inet_act_led { ++ function = "inet_act_led"; ++ pins = "gpio11"; ++ }; ++ ++ pinctrl_pcie_clkreq: pcie_clkreq { ++ function = "pcie_clkreq"; ++ pins = "gpio16"; ++ }; ++ ++ pinctrl_ephy0_spd_led: ephy0_spd_led { ++ function = "led"; ++ pins = "gpio17"; ++ }; ++ ++ pinctrl_ephy1_spd_led: ephy1_spd_led { ++ function = "led"; ++ pins = "gpio18"; ++ }; ++ ++ pinctrl_ephy2_spd_led: ephy2_spd_led { ++ function = "led"; ++ pins = "gpio19"; ++ }; ++ ++ pinctrl_ephy3_spd_led: ephy3_spd_led { ++ function = "led"; ++ pins = "gpio20"; ++ }; ++ ++ pinctrl_ephy0_act_led: ephy0_act_led { ++ function = "ephy0_act_led"; ++ pins = "gpio25"; ++ }; ++ ++ pinctrl_ephy1_act_led: ephy1_act_led { ++ function = "ephy1_act_led"; ++ pins = "gpio26"; ++ }; ++ ++ pinctrl_ephy2_act_led: ephy2_act_led { ++ function = "ephy2_act_led"; ++ pins = "gpio27"; ++ }; ++ ++ pinctrl_ephy3_act_led: ephy3_act_led { ++ function = "ephy3_act_led"; ++ pins = "gpio28"; ++ }; ++ ++ pinctrl_hsspi_cs1: hsspi_cs1 { ++ function = "hsspi_cs1"; ++ pins = "hsspi_cs1"; ++ }; ++ ++ pinctrl_usb_port1_device: usb_port1_device { ++ function = "usb_device_port"; ++ pins = "usb_port1"; ++ }; ++ ++ pinctrl_usb_port1_host: usb_port1_host { ++ function = "usb_host_port"; ++ pins = "usb_port1"; ++ }; ++ }; ++ }; diff --git a/target/linux/bmips/patches-5.10/400-pinctrl-add-bcm63xx-base-code.patch b/target/linux/bmips/patches-5.10/400-pinctrl-add-bcm63xx-base-code.patch deleted file mode 100644 index 0f42bd2f83..0000000000 --- a/target/linux/bmips/patches-5.10/400-pinctrl-add-bcm63xx-base-code.patch +++ /dev/null @@ -1,226 +0,0 @@ -From ab2f33e35e35905a76204138143875251f3e1088 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jonas.gorski@gmail.com> -Date: Fri, 24 Jun 2016 22:07:42 +0200 -Subject: [PATCH 01/13] pinctrl: add bcm63xx base code - -Setup directory and add a helper for bcm63xx pinctrl support. - -Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> ---- - drivers/pinctrl/Kconfig | 1 + - drivers/pinctrl/Makefile | 1 + - drivers/pinctrl/bcm63xx/Kconfig | 3 + - drivers/pinctrl/bcm63xx/Makefile | 1 + - drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.c | 142 ++++++++++++++++++++++++++++++ - drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.h | 14 +++ - 7 files changed, 163 insertions(+) - create mode 100644 drivers/pinctrl/bcm63xx/Kconfig - create mode 100644 drivers/pinctrl/bcm63xx/Makefile - create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.c - create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.h - ---- a/drivers/pinctrl/Kconfig -+++ b/drivers/pinctrl/Kconfig -@@ -377,6 +377,7 @@ config PINCTRL_OCELOT - source "drivers/pinctrl/actions/Kconfig" - source "drivers/pinctrl/aspeed/Kconfig" - source "drivers/pinctrl/bcm/Kconfig" -+source "drivers/pinctrl/bcm63xx/Kconfig" - source "drivers/pinctrl/berlin/Kconfig" - source "drivers/pinctrl/freescale/Kconfig" - source "drivers/pinctrl/intel/Kconfig" ---- a/drivers/pinctrl/Makefile -+++ b/drivers/pinctrl/Makefile -@@ -51,6 +51,7 @@ obj-$(CONFIG_PINCTRL_EQUILIBRIUM) += p - obj-y += actions/ - obj-$(CONFIG_ARCH_ASPEED) += aspeed/ - obj-y += bcm/ -+obj-y += bcm63xx/ - obj-$(CONFIG_PINCTRL_BERLIN) += berlin/ - obj-y += freescale/ - obj-$(CONFIG_X86) += intel/ ---- /dev/null -+++ b/drivers/pinctrl/bcm63xx/Kconfig -@@ -0,0 +1,3 @@ -+config PINCTRL_BCM63XX -+ bool -+ select GPIO_GENERIC ---- /dev/null -+++ b/drivers/pinctrl/bcm63xx/Makefile -@@ -0,0 +1 @@ -+obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o ---- /dev/null -+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.c -@@ -0,0 +1,155 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com> -+ */ -+ -+#include <linux/bitops.h> -+#include <linux/device.h> -+#include <linux/gpio/driver.h> -+#include <linux/of_irq.h> -+ -+#include "pinctrl-bcm63xx.h" -+#include "../core.h" -+ -+#define BANK_SIZE sizeof(u32) -+#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE) -+ -+#ifdef CONFIG_OF -+static int bcm63xx_gpio_of_xlate(struct gpio_chip *gc, -+ const struct of_phandle_args *gpiospec, -+ u32 *flags) -+{ -+ struct gpio_chip *base = gpiochip_get_data(gc); -+ int pin = gpiospec->args[0]; -+ -+ if (gc != &base[pin / PINS_PER_BANK]) -+ return -EINVAL; -+ -+ pin = pin % PINS_PER_BANK; -+ -+ if (pin >= gc->ngpio) -+ return -EINVAL; -+ -+ if (flags) -+ *flags = gpiospec->args[1]; -+ -+ return pin; -+} -+#endif -+ -+static int bcm63xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) -+{ -+ struct gpio_chip *base = gpiochip_get_data(chip); -+ char irq_name[7]; /* "gpioXX" */ -+ -+ /* FIXME: this is ugly */ -+ sprintf(irq_name, "gpio%d", gpio + PINS_PER_BANK * (chip - base)); -+ return of_irq_get_byname(chip->of_node, irq_name); -+} -+ -+static int bcm63xx_setup_gpio(struct device *dev, struct gpio_chip *gc, -+ void __iomem *dirout, void __iomem *data, -+ size_t sz, int ngpio) -+ -+{ -+ int banks, chips, i, ret = -EINVAL; -+ -+ chips = DIV_ROUND_UP(ngpio, PINS_PER_BANK); -+ banks = sz / BANK_SIZE; -+ -+ for (i = 0; i < chips; i++) { -+ int offset, pins; -+ int reg_offset; -+ char *label; -+ -+ label = devm_kasprintf(dev, GFP_KERNEL, "bcm63xx-gpio.%i", i); -+ if (!label) -+ return -ENOMEM; -+ -+ offset = i * PINS_PER_BANK; -+ pins = min_t(int, ngpio - offset, PINS_PER_BANK); -+ -+ /* the registers are treated like a huge big endian register */ -+ reg_offset = (banks - i - 1) * BANK_SIZE; -+ -+ ret = bgpio_init(&gc[i], dev, BANK_SIZE, data + reg_offset, -+ NULL, NULL, dirout + reg_offset, NULL, -+ BGPIOF_BIG_ENDIAN_BYTE_ORDER); -+ if (ret) -+ return ret; -+ -+ gc[i].request = gpiochip_generic_request; -+ gc[i].free = gpiochip_generic_free; -+ -+ if (of_get_property(dev->of_node, "interrupt-names", NULL)) -+ gc[i].to_irq = bcm63xx_gpio_to_irq; -+ -+#ifdef CONFIG_OF -+ gc[i].of_gpio_n_cells = 2; -+ gc[i].of_xlate = bcm63xx_gpio_of_xlate; -+#endif -+ -+ gc[i].label = label; -+ gc[i].ngpio = pins; -+ -+ devm_gpiochip_add_data(dev, &gc[i], gc); -+ } -+ -+ return 0; -+} -+ -+static void bcm63xx_setup_pinranges(struct gpio_chip *gc, const char *name, -+ int ngpio) -+{ -+ int i, chips = DIV_ROUND_UP(ngpio, PINS_PER_BANK); -+ -+ for (i = 0; i < chips; i++) { -+ int offset, pins; -+ -+ offset = i * PINS_PER_BANK; -+ pins = min_t(int, ngpio - offset, PINS_PER_BANK); -+ -+ gpiochip_add_pin_range(&gc[i], name, 0, offset, pins); -+ } -+} -+ -+struct pinctrl_dev *bcm63xx_pinctrl_register(struct platform_device *pdev, -+ struct pinctrl_desc *desc, -+ void *priv, struct gpio_chip *gc, -+ int ngpio) -+{ -+ struct pinctrl_dev *pctldev; -+ struct resource *res; -+ void __iomem *dirout, *data; -+ size_t sz; -+ int ret; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dirout"); -+ dirout = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(dirout)) -+ return ERR_CAST(dirout); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dat"); -+ data = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(data)) -+ return ERR_CAST(data); -+ -+ sz = resource_size(res); -+ -+ ret = bcm63xx_setup_gpio(&pdev->dev, gc, dirout, data, sz, ngpio); -+ if (ret) -+ return ERR_PTR(ret); -+ -+ pctldev = devm_pinctrl_register(&pdev->dev, desc, priv); -+ if (IS_ERR(pctldev)) -+ return pctldev; -+ -+ bcm63xx_setup_pinranges(gc, pinctrl_dev_get_devname(pctldev), ngpio); -+ -+ dev_info(&pdev->dev, "registered at mmio %p\n", dirout); -+ -+ return pctldev; -+} ---- /dev/null -+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.h -@@ -0,0 +1,14 @@ -+#ifndef __PINCTRL_BCM63XX -+#define __PINCTRL_BCM63XX -+ -+#include <linux/kernel.h> -+#include <linux/gpio.h> -+#include <linux/pinctrl/pinctrl.h> -+#include <linux/platform_device.h> -+ -+struct pinctrl_dev *bcm63xx_pinctrl_register(struct platform_device *pdev, -+ struct pinctrl_desc *desc, -+ void *priv, struct gpio_chip *gc, -+ int ngpio); -+ -+#endif diff --git a/target/linux/bmips/patches-5.10/401-Documentation-add-BCM6328-pincontroller-binding-docu.patch b/target/linux/bmips/patches-5.10/401-Documentation-add-BCM6328-pincontroller-binding-docu.patch deleted file mode 100644 index 3a2a7811db..0000000000 --- a/target/linux/bmips/patches-5.10/401-Documentation-add-BCM6328-pincontroller-binding-docu.patch +++ /dev/null @@ -1,78 +0,0 @@ -From 4bdd40849632608d5cb7d3a64380cd76e7eea07b Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jonas.gorski@gmail.com> -Date: Wed, 27 Jul 2016 11:33:56 +0200 -Subject: [PATCH 02/16] Documentation: add BCM6328 pincontroller binding - documentation - -Add binding documentation for the pincontrol core found in BCM6328 SoCs. - -Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> ---- - .../bindings/pinctrl/brcm,bcm6328-pinctrl.txt | 61 ++++++++++++++++++++++ - 1 file changed, 61 insertions(+) - create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.txt -@@ -0,0 +1,61 @@ -+* Broadcom BCM6328 pin controller -+ -+Required properties: -+- compatible: Must be "brcm,bcm6328-pinctrl". -+- reg: Register specifies of dirout, dat, mode, mux registers. -+- reg-names: Must be "dirout", "dat", "mode", "mux". -+- gpio-controller: Identifies this node as a GPIO controller. -+- #gpio-cells: Must be <2> -+ -+Example: -+ -+pinctrl: pin-controller@10000080 { -+ compatible = "brcm,bcm6328-pinctrl"; -+ reg = <0x10000080 0x8>, -+ <0x10000088 0x8>, -+ <0x10000098 0x4>, -+ <0x1000009c 0xc>; -+ reg-names = "dirout", "dat", "mode", "mux"; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+}; -+ -+Available pins/groups and functions: -+ -+name pins functions -+----------------------------------------------------------- -+gpio0 0 led -+gpio1 1 led -+gpio2 2 led -+gpio3 3 led -+gpio4 4 led -+gpio5 5 led -+gpio6 6 led, serial_led_data -+gpio7 7 led, serial_led_clk -+gpio8 8 led -+gpio9 9 led -+gpio10 10 led -+gpio11 11 led -+gpio12 12 led -+gpio13 13 led -+gpio14 14 led -+gpio15 15 led -+gpio16 16 led, pcie_clkreq -+gpio17 17 led -+gpio18 18 led -+gpio19 19 led -+gpio20 20 led -+gpio21 21 led -+gpio22 22 led -+gpio23 23 led -+gpio24 24 - -+gpio25 25 ephy0_act_led -+gpio26 26 ephy1_act_led -+gpio27 27 ephy2_act_led -+gpio28 28 ephy3_act_led -+gpio29 29 - -+gpio30 30 - -+gpio31 31 - -+hsspi_cs1 - hsspi_cs1 -+usb_port1 - usb_host_port, usb_device_port diff --git a/target/linux/bmips/patches-5.10/402-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch b/target/linux/bmips/patches-5.10/401-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch index b4043bdc1c..0e223f2fca 100644 --- a/target/linux/bmips/patches-5.10/402-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch +++ b/target/linux/bmips/patches-5.10/401-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch @@ -1,58 +1,75 @@ -From 393e9753f6492c1fdf55891ddee60d955ae8b119 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jonas.gorski@gmail.com> +From 3373a507212e6394921781766e9cd0dc155c62ba Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com> Date: Fri, 24 Jun 2016 22:12:50 +0200 -Subject: [PATCH 03/16] pinctrl: add a pincontrol driver for BCM6328 +Subject: [PATCH 02/12] pinctrl: add a pincontrol driver for BCM6328 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit Add a pincontrol driver for BCM6328. BCM628 supports muxing 32 pins as GPIOs, as LEDs for the integrated LED controller, or various other functions. Its pincontrol mux registers also control other aspects, like switching the second USB port between host and device mode. +Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> --- - drivers/pinctrl/bcm63xx/Kconfig | 7 + - drivers/pinctrl/bcm63xx/Makefile | 1 + - drivers/pinctrl/bcm63xx/pinctrl-bcm6328.c | 456 ++++++++++++++++++++++++++++++ - 3 files changed, 464 insertions(+) - create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6328.c + drivers/pinctrl/bcm/Kconfig | 11 + + drivers/pinctrl/bcm/Makefile | 1 + + drivers/pinctrl/bcm/pinctrl-bcm6328.c | 581 ++++++++++++++++++++++++++ + 3 files changed, 593 insertions(+) + create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6328.c ---- a/drivers/pinctrl/bcm63xx/Kconfig -+++ b/drivers/pinctrl/bcm63xx/Kconfig -@@ -1,3 +1,10 @@ - config PINCTRL_BCM63XX - bool - select GPIO_GENERIC -+ +--- a/drivers/pinctrl/bcm/Kconfig ++++ b/drivers/pinctrl/bcm/Kconfig +@@ -29,6 +29,17 @@ config PINCTRL_BCM2835 + help + Say Y here to enable the Broadcom BCM2835 GPIO driver. + +config PINCTRL_BCM6328 -+ bool "BCM6328 pincontrol driver" ++ bool "Broadcom BCM6328 GPIO driver" ++ depends on OF_GPIO && (BMIPS_GENERIC || COMPILE_TEST) + select PINMUX + select PINCONF -+ select PINCTRL_BCM63XX + select GENERIC_PINCONF ---- a/drivers/pinctrl/bcm63xx/Makefile -+++ b/drivers/pinctrl/bcm63xx/Makefile -@@ -1 +1,2 @@ - obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o -+obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o ++ select MFD_SYSCON ++ default BMIPS_GENERIC ++ help ++ Say Y here to enable the Broadcom BCM6328 GPIO driver. ++ + config PINCTRL_IPROC_GPIO + bool "Broadcom iProc GPIO (with PINCONF) driver" + depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST) +--- a/drivers/pinctrl/bcm/Makefile ++++ b/drivers/pinctrl/bcm/Makefile +@@ -3,6 +3,7 @@ + + obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o + obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o ++obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o + obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o + obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o + obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o --- /dev/null -+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6328.c -@@ -0,0 +1,456 @@ ++++ b/drivers/pinctrl/bcm/pinctrl-bcm6328.c +@@ -0,0 +1,581 @@ ++// SPDX-License-Identifier: GPL-2.0+ +/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. ++ * Driver for BCM6328 GPIO unit (pinctrl + GPIO) + * ++ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com> + * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com> + */ + +#include <linux/bitops.h> +#include <linux/gpio.h> +#include <linux/kernel.h> -+#include <linux/slab.h> -+#include <linux/spinlock.h> ++#include <linux/mfd/syscon.h> +#include <linux/of.h> +#include <linux/of_gpio.h> ++#include <linux/of_irq.h> +#include <linux/platform_device.h> ++#include <linux/regmap.h> + +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf.h> @@ -62,13 +79,18 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> +#include "../core.h" +#include "../pinctrl-utils.h" + -+#include "pinctrl-bcm63xx.h" ++#define MODULE_NAME "bcm6328-pinctrl" ++#define BCM6328_NUM_GPIOS 32 + -+#define BCM6328_MUX_LO_REG 0x4 -+#define BCM6328_MUX_HI_REG 0x0 -+#define BCM6328_MUX_OTHER_REG 0x8 ++#define BANK_SIZE sizeof(uint32_t) ++#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE) + -+#define BCM6328_NGPIO 32 ++#define BCM6328_DIROUT_REG 0x04 ++#define BCM6328_DATA_REG 0x0c ++#define BCM6328_MODE_REG 0x18 ++#define BCM6328_MUX_HI_REG 0x1c ++#define BCM6328_MUX_LO_REG 0x20 ++#define BCM6328_MUX_OTHER_REG 0x24 + +struct bcm6328_pingroup { + const char *name; @@ -86,16 +108,13 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> +}; + +struct bcm6328_pinctrl { -+ struct pinctrl_dev *pctldev; -+ struct pinctrl_desc desc; -+ -+ void __iomem *mode; -+ void __iomem *mux[3]; ++ struct device *dev; ++ struct regmap *regs; + -+ /* register access lock */ -+ spinlock_t lock; -+ -+ struct gpio_chip gpio; ++ struct pinctrl_dev *pctl_dev; ++ struct gpio_chip gpio_chip; ++ struct pinctrl_desc pctl_desc; ++ struct pinctrl_gpio_range gpio_range; +}; + +static const struct pinctrl_pin_desc bcm6328_pins[] = { @@ -325,6 +344,119 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> + BCM6328_MUX_FUN(usb_device_port, 2), +}; + ++static inline unsigned int bcm6328_bank_pin(unsigned int pin) ++{ ++ return pin % PINS_PER_BANK; ++} ++ ++static inline unsigned int bcm6318_mux_off(unsigned int pin) ++{ ++ static const unsigned int bcm6328_mux[] = { ++ BCM6328_MUX_LO_REG, ++ BCM6328_MUX_HI_REG, ++ BCM6328_MUX_OTHER_REG ++ }; ++ ++ return bcm6328_mux[pin / 16]; ++} ++ ++static inline unsigned int bcm6328_reg_off(unsigned int reg, unsigned int pin) ++{ ++ return reg - (pin / PINS_PER_BANK) * BANK_SIZE; ++} ++ ++static int bcm6328_gpio_direction_input(struct gpio_chip *chip, ++ unsigned int pin) ++{ ++ struct bcm6328_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int dirout = bcm6328_reg_off(BCM6328_DIROUT_REG, pin); ++ unsigned int bank_pin = bcm6328_bank_pin(pin); ++ int ret; ++ ++ /* ++ * Check with the pinctrl driver whether this pin is usable as ++ * an input GPIO ++ */ ++ ret = pinctrl_gpio_direction_input(chip->base + pin); ++ if (ret) ++ return ret; ++ ++ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), 0); ++ ++ return 0; ++} ++ ++static int bcm6328_gpio_direction_output(struct gpio_chip *chip, ++ unsigned int pin, int value) ++{ ++ struct bcm6328_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int data = bcm6328_reg_off(BCM6328_DATA_REG, pin); ++ unsigned int dirout = bcm6328_reg_off(BCM6328_DIROUT_REG, pin); ++ unsigned int bank_pin = bcm6328_bank_pin(pin); ++ unsigned int val = value ? BIT(bank_pin) : 0; ++ int ret; ++ ++ /* ++ * Check with the pinctrl driver whether this pin is usable as ++ * an output GPIO ++ */ ++ ret = pinctrl_gpio_direction_output(chip->base + pin); ++ if (ret) ++ return ret; ++ ++ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), BIT(bank_pin)); ++ regmap_update_bits(pc->regs, data, BIT(bank_pin), val); ++ ++ return 0; ++} ++ ++static int bcm6328_gpio_get(struct gpio_chip *chip, unsigned int pin) ++{ ++ struct bcm6328_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int data = bcm6328_reg_off(BCM6328_DATA_REG, pin); ++ unsigned int bank_pin = bcm6328_bank_pin(pin); ++ unsigned int val; ++ ++ regmap_read(pc->regs, data, &val); ++ ++ return !!(val & BIT(bank_pin)); ++} ++ ++static int bcm6328_gpio_get_direction(struct gpio_chip *chip, unsigned int pin) ++{ ++ struct bcm6328_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int dirout = bcm6328_reg_off(BCM6328_DIROUT_REG, pin); ++ unsigned int bank_pin = bcm6328_bank_pin(pin); ++ unsigned int val; ++ ++ regmap_read(pc->regs, dirout, &val); ++ ++ if (val & BIT(bank_pin)) ++ return GPIO_LINE_DIRECTION_OUT; ++ ++ return GPIO_LINE_DIRECTION_IN; ++} ++ ++static void bcm6328_gpio_set(struct gpio_chip *chip, unsigned int pin, ++ int value) ++{ ++ struct bcm6328_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int data = bcm6328_reg_off(BCM6328_DATA_REG, pin); ++ unsigned int bank_pin = bcm6328_bank_pin(pin); ++ unsigned int val = value ? BIT(bank_pin) : 0; ++ ++ regmap_update_bits(pc->regs, data, BIT(bank_pin), val); ++} ++ ++static int bcm6328_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) ++{ ++ char irq_name[7]; ++ ++ sprintf(irq_name, "gpio%d", gpio); ++ ++ return of_irq_get_byname(chip->of_node, irq_name); ++} ++ +static int bcm6328_pinctrl_get_group_count(struct pinctrl_dev *pctldev) +{ + return ARRAY_SIZE(bcm6328_groups); @@ -368,37 +500,26 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> + return 0; +} + -+static void bcm6328_rmw_mux(struct bcm6328_pinctrl *pctl, unsigned pin, -+ u32 mode, u32 mux) ++static void bcm6328_rmw_mux(struct bcm6328_pinctrl *pc, unsigned pin, ++ unsigned int mode, unsigned int mux) +{ -+ unsigned long flags; -+ u32 reg; -+ -+ spin_lock_irqsave(&pctl->lock, flags); -+ if (pin < 32) { -+ reg = __raw_readl(pctl->mode); -+ reg &= ~BIT(pin); -+ if (mode) -+ reg |= BIT(pin); -+ __raw_writel(reg, pctl->mode); -+ } -+ -+ reg = __raw_readl(pctl->mux[pin / 16]); -+ reg &= ~(3UL << ((pin % 16) * 2)); -+ reg |= mux << ((pin % 16) * 2); -+ __raw_writel(reg, pctl->mux[pin / 16]); ++ if (pin < BCM6328_NUM_GPIOS) ++ regmap_update_bits(pc->regs, BCM6328_MODE_REG, BIT(pin), ++ mode ? BIT(pin) : 0); + -+ spin_unlock_irqrestore(&pctl->lock, flags); ++ regmap_update_bits(pc->regs, bcm6318_mux_off(pin), ++ 3UL << ((pin % 16) * 2), ++ mux << ((pin % 16) * 2)); +} + +static int bcm6328_pinctrl_set_mux(struct pinctrl_dev *pctldev, + unsigned selector, unsigned group) +{ -+ struct bcm6328_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); -+ const struct bcm6328_pingroup *grp = &bcm6328_groups[group]; ++ struct bcm6328_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); ++ const struct bcm6328_pingroup *pg = &bcm6328_groups[group]; + const struct bcm6328_function *f = &bcm6328_funcs[selector]; + -+ bcm6328_rmw_mux(pctl, grp->pins[0], f->mode_val, f->mux_val); ++ bcm6328_rmw_mux(pc, pg->pins[0], f->mode_val, f->mux_val); + + return 0; +} @@ -407,74 +528,94 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> + struct pinctrl_gpio_range *range, + unsigned offset) +{ -+ struct bcm6328_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); ++ struct bcm6328_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); + + /* disable all functions using this pin */ -+ bcm6328_rmw_mux(pctl, offset, 0, 0); ++ bcm6328_rmw_mux(pc, offset, 0, 0); + + return 0; +} + +static struct pinctrl_ops bcm6328_pctl_ops = { -+ .get_groups_count = bcm6328_pinctrl_get_group_count, -+ .get_group_name = bcm6328_pinctrl_get_group_name, -+ .get_group_pins = bcm6328_pinctrl_get_group_pins, -+#ifdef CONFIG_OF -+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, -+ .dt_free_map = pinctrl_utils_free_map, -+#endif ++ .get_groups_count = bcm6328_pinctrl_get_group_count, ++ .get_group_name = bcm6328_pinctrl_get_group_name, ++ .get_group_pins = bcm6328_pinctrl_get_group_pins, ++ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, ++ .dt_free_map = pinctrl_utils_free_map, +}; + +static struct pinmux_ops bcm6328_pmx_ops = { -+ .get_functions_count = bcm6328_pinctrl_get_func_count, -+ .get_function_name = bcm6328_pinctrl_get_func_name, -+ .get_function_groups = bcm6328_pinctrl_get_groups, -+ .set_mux = bcm6328_pinctrl_set_mux, -+ .gpio_request_enable = bcm6328_gpio_request_enable, -+ .strict = true, ++ .get_functions_count = bcm6328_pinctrl_get_func_count, ++ .get_function_name = bcm6328_pinctrl_get_func_name, ++ .get_function_groups = bcm6328_pinctrl_get_groups, ++ .set_mux = bcm6328_pinctrl_set_mux, ++ .gpio_request_enable = bcm6328_gpio_request_enable, ++ .strict = true, +}; + +static int bcm6328_pinctrl_probe(struct platform_device *pdev) +{ -+ struct bcm6328_pinctrl *pctl; -+ struct resource *res; -+ void __iomem *mode, *mux; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode"); -+ mode = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(mode)) -+ return PTR_ERR(mode); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mux"); -+ mux = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(mux)) -+ return PTR_ERR(mux); -+ -+ pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL); -+ if (!pctl) -+ return -ENOMEM; -+ -+ spin_lock_init(&pctl->lock); ++ struct device *dev = &pdev->dev; ++ struct device_node *np = dev->of_node; ++ struct bcm6328_pinctrl *pc; ++ int err; + -+ pctl->mode = mode; -+ pctl->mux[0] = mux + BCM6328_MUX_LO_REG; -+ pctl->mux[1] = mux + BCM6328_MUX_HI_REG; -+ pctl->mux[2] = mux + BCM6328_MUX_OTHER_REG; ++ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL); ++ if (!pc) ++ return -ENOMEM; + -+ pctl->desc.name = dev_name(&pdev->dev); -+ pctl->desc.owner = THIS_MODULE; -+ pctl->desc.pctlops = &bcm6328_pctl_ops; -+ pctl->desc.pmxops = &bcm6328_pmx_ops; ++ platform_set_drvdata(pdev, pc); ++ pc->dev = dev; ++ ++ pc->regs = syscon_node_to_regmap(dev->parent->of_node); ++ if (IS_ERR(pc->regs)) ++ return PTR_ERR(pc->regs); ++ ++ pc->gpio_chip.label = MODULE_NAME; ++ pc->gpio_chip.owner = THIS_MODULE; ++ pc->gpio_chip.request = gpiochip_generic_request; ++ pc->gpio_chip.free = gpiochip_generic_free; ++ pc->gpio_chip.direction_input = bcm6328_gpio_direction_input; ++ pc->gpio_chip.direction_output = bcm6328_gpio_direction_output; ++ pc->gpio_chip.get_direction = bcm6328_gpio_get_direction; ++ pc->gpio_chip.get = bcm6328_gpio_get; ++ pc->gpio_chip.set = bcm6328_gpio_set; ++ pc->gpio_chip.set_config = gpiochip_generic_config; ++ pc->gpio_chip.base = -1; ++ pc->gpio_chip.ngpio = BCM6328_NUM_GPIOS; ++ pc->gpio_chip.can_sleep = false; ++ pc->gpio_chip.parent = dev; ++ pc->gpio_chip.of_node = np; ++ ++ if (of_get_property(np, "interrupt-names", NULL)) ++ pc->gpio_chip.to_irq = bcm6328_gpio_to_irq; ++ ++ err = gpiochip_add_data(&pc->gpio_chip, pc); ++ if (err) { ++ dev_err(dev, "could not add GPIO chip\n"); ++ return err; ++ } + -+ pctl->desc.npins = ARRAY_SIZE(bcm6328_pins); -+ pctl->desc.pins = bcm6328_pins; ++ pc->pctl_desc.name = MODULE_NAME, ++ pc->pctl_desc.pins = bcm6328_pins, ++ pc->pctl_desc.npins = ARRAY_SIZE(bcm6328_pins), ++ pc->pctl_desc.pctlops = &bcm6328_pctl_ops, ++ pc->pctl_desc.pmxops = &bcm6328_pmx_ops, ++ pc->pctl_desc.owner = THIS_MODULE, ++ ++ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc); ++ if (IS_ERR(pc->pctl_dev)) { ++ gpiochip_remove(&pc->gpio_chip); ++ return PTR_ERR(pc->pctl_dev); ++ } + -+ platform_set_drvdata(pdev, pctl); ++ pc->gpio_range.name = MODULE_NAME; ++ pc->gpio_range.npins = BCM6328_NUM_GPIOS; ++ pc->gpio_range.base = pc->gpio_chip.base; ++ pc->gpio_range.gc = &pc->gpio_chip; ++ pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range); + -+ pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl, -+ &pctl->gpio, BCM6328_NGPIO); -+ if (IS_ERR(pctl->pctldev)) -+ return PTR_ERR(pctl->pctldev); ++ dev_info(dev, "registered\n"); + + return 0; +} @@ -487,7 +628,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> +static struct platform_driver bcm6328_pinctrl_driver = { + .probe = bcm6328_pinctrl_probe, + .driver = { -+ .name = "bcm6328-pinctrl", ++ .name = MODULE_NAME, + .of_match_table = bcm6328_pinctrl_match, + }, +}; diff --git a/target/linux/bmips/patches-5.10/402-Documentation-add-BCM6358-pincontroller-binding-docu.patch b/target/linux/bmips/patches-5.10/402-Documentation-add-BCM6358-pincontroller-binding-docu.patch new file mode 100644 index 0000000000..e4c6343e3f --- /dev/null +++ b/target/linux/bmips/patches-5.10/402-Documentation-add-BCM6358-pincontroller-binding-docu.patch @@ -0,0 +1,152 @@ +From 9fbcbe08479bcb3609952b66627e2d612173229a Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com> +Date: Wed, 27 Jul 2016 11:36:00 +0200 +Subject: [PATCH 03/12] Documentation: add BCM6358 pincontroller binding + documentation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add binding documentation for the pincontrol core found in BCM6358 SoCs. + +Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> +Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> +--- + .../pinctrl/brcm,bcm6358-pinctrl.yaml | 131 ++++++++++++++++++ + 1 file changed, 131 insertions(+) + create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml +@@ -0,0 +1,131 @@ ++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6358-pinctrl.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Broadcom BCM6358 pin controller ++ ++maintainers: ++ - Álvaro Fernández Rojas <noltari@gmail.com> ++ - Jonas Gorski <jonas.gorski@gmail.com> ++ ++description: |+ ++ The pin controller node should be the child of a syscon node. ++ ++ Refer to the the bindings described in ++ Documentation/devicetree/bindings/mfd/syscon.yaml ++ ++properties: ++ compatible: ++ const: brcm,bcm6358-pinctrl ++ ++ gpio-controller: true ++ ++ '#gpio-cells': ++ description: ++ Specifies the pin number and flags, as defined in ++ include/dt-bindings/gpio/gpio.h ++ const: 2 ++ ++ interrupts-extended: ++ description: ++ One interrupt per each of the 4 GPIO ports supported by the controller, ++ sorted by port number ascending order. ++ minItems: 6 ++ maxItems: 6 ++ ++patternProperties: ++ '^.*$': ++ if: ++ type: object ++ then: ++ properties: ++ function: ++ $ref: "/schemas/types.yaml#/definitions/string" ++ enum: [ ebi_cs, uart1, serial_led, legacy_led, led, spi_cs, utopia, ++ pwm_syn_clk, sys_irq ] ++ ++ pins: ++ $ref: "/schemas/types.yaml#/definitions/string" ++ enum: [ ebi_cs_grp, uart1_grp, serial_led_grp, legacy_led_grp, ++ led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ] ++ ++required: ++ - compatible ++ - gpio-controller ++ - '#gpio-cells' ++ ++additionalProperties: false ++ ++examples: ++ - | ++ gpio@fffe0080 { ++ compatible = "syscon", "simple-mfd"; ++ reg = <0xfffe0080 0x80>; ++ ++ pinctrl: pinctrl { ++ compatible = "brcm,bcm6358-pinctrl"; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ interrupts-extended = <&ext_intc1 0 0>, ++ <&ext_intc1 1 0>, ++ <&ext_intc0 0 0>, ++ <&ext_intc0 1 0>, ++ <&ext_intc0 2 0>, ++ <&ext_intc0 3 0>; ++ interrupt-names = "gpio32", ++ "gpio33", ++ "gpio34", ++ "gpio35", ++ "gpio36", ++ "gpio37"; ++ ++ pinctrl_ebi_cs: ebi_cs { ++ function = "ebi_cs"; ++ groups = "ebi_cs_grp"; ++ }; ++ ++ pinctrl_uart1: uart1 { ++ function = "uart1"; ++ groups = "uart1_grp"; ++ }; ++ ++ pinctrl_serial_led: serial_led { ++ function = "serial_led"; ++ groups = "serial_led_grp"; ++ }; ++ ++ pinctrl_legacy_led: legacy_led { ++ function = "legacy_led"; ++ groups = "legacy_led_grp"; ++ }; ++ ++ pinctrl_led: led { ++ function = "led"; ++ groups = "led_grp"; ++ }; ++ ++ pinctrl_spi_cs_23: spi_cs { ++ function = "spi_cs"; ++ groups = "spi_cs_grp"; ++ }; ++ ++ pinctrl_utopia: utopia { ++ function = "utopia"; ++ groups = "utopia_grp"; ++ }; ++ ++ pinctrl_pwm_syn_clk: pwm_syn_clk { ++ function = "pwm_syn_clk"; ++ groups = "pwm_syn_clk_grp"; ++ }; ++ ++ pinctrl_sys_irq: sys_irq { ++ function = "sys_irq"; ++ groups = "sys_irq_grp"; ++ }; ++ }; ++ }; diff --git a/target/linux/bmips/patches-5.10/403-Documentation-add-BCM6358-pincontroller-binding-docu.patch b/target/linux/bmips/patches-5.10/403-Documentation-add-BCM6358-pincontroller-binding-docu.patch deleted file mode 100644 index e8a7479915..0000000000 --- a/target/linux/bmips/patches-5.10/403-Documentation-add-BCM6358-pincontroller-binding-docu.patch +++ /dev/null @@ -1,61 +0,0 @@ -From c7c8fa7f5b5ee9bea751fa7bdae8ff4acde8f26e Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jonas.gorski@gmail.com> -Date: Wed, 27 Jul 2016 11:36:00 +0200 -Subject: [PATCH 06/16] Documentation: add BCM6358 pincontroller binding - documentation - -Add binding documentation for the pincontrol core found in BCM6358 SoCs. - -Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> ---- - .../bindings/pinctrl/brcm,bcm6358-pinctrl.txt | 44 ++++++++++++++++++++++ - 1 file changed, 44 insertions(+) - create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.txt -@@ -0,0 +1,44 @@ -+* Broadcom BCM6358 pin controller -+ -+Required properties: -+- compatible: Must be "brcm,bcm6358-pinctrl". -+- reg: Register specifiers of dirout, dat registers. -+- reg-names: Must be "dirout", "dat". -+- brcm,gpiomode: Phandle to the shared gpiomode register. -+- gpio-controller: Identifies this node as a gpio-controller. -+- #gpio-cells: Must be <2>. -+ -+Example: -+ -+pinctrl: pin-controller@fffe0080 { -+ compatible = "brcm,bcm6358-pinctrl"; -+ reg = <0xfffe0080 0x8>, -+ <0xfffe0088 0x8>, -+ <0xfffe0098 0x4>; -+ reg-names = "dirout", "dat"; -+ brcm,gpiomode = <&gpiomode>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+}; -+ -+gpiomode: syscon@fffe0098 { -+ compatible = "brcm,bcm6358-gpiomode", "syscon"; -+ reg = <0xfffe0098 0x4>; -+ native-endian; -+}; -+ -+Available pins/groups and functions: -+ -+name pins functions -+----------------------------------------------------------- -+ebi_cs_grp 30-31 ebi_cs -+uart1_grp 28-31 uart1 -+spi_cs_grp 32-33 spi_cs -+async_modem_grp 12-15 async_modem -+legacy_led_grp 9-15 legacy_led -+serial_led_grp 6-7 serial_led -+led_grp 0-3 led -+utopia_grp 12-15, 22-31 utopia -+pwm_syn_clk_grp 8 pwm_syn_clk -+sys_irq_grp 5 sys_irq diff --git a/target/linux/bmips/patches-5.10/404-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch b/target/linux/bmips/patches-5.10/403-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch index d102bda802..fb8681d904 100644 --- a/target/linux/bmips/patches-5.10/404-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch +++ b/target/linux/bmips/patches-5.10/403-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch @@ -1,7 +1,10 @@ -From fb00ef462f3f8b70ea8902151cc72810fe90b999 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jonas.gorski@gmail.com> +From b0e1ebc79a6d7f84f71a758f5a504c8cf954e2e0 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com> Date: Fri, 24 Jun 2016 22:16:01 +0200 -Subject: [PATCH 07/16] pinctrl: add a pincontrol driver for BCM6358 +Subject: [PATCH 04/12] pinctrl: add a pincontrol driver for BCM6358 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit Add a pincotrol driver for BCM6358. BCM6358 allow overlaying different functions onto the GPIO pins. It does not support configuring individual @@ -9,71 +12,85 @@ pins but only whole groups. These groups may overlap, and still require the directions to be set correctly in the GPIO register. In addition the functions register controls other, not directly mux related functions. +Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> --- - drivers/pinctrl/bcm63xx/Kconfig | 8 + - drivers/pinctrl/bcm63xx/Makefile | 1 + - drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c | 393 ++++++++++++++++++++++++++++++ - 3 files changed, 402 insertions(+) - create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c + drivers/pinctrl/bcm/Kconfig | 11 + + drivers/pinctrl/bcm/Makefile | 1 + + drivers/pinctrl/bcm/pinctrl-bcm6358.c | 526 ++++++++++++++++++++++++++ + 3 files changed, 538 insertions(+) + create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6358.c ---- a/drivers/pinctrl/bcm63xx/Kconfig -+++ b/drivers/pinctrl/bcm63xx/Kconfig -@@ -8,3 +8,11 @@ config PINCTRL_BCM6328 - select PINCONF - select PINCTRL_BCM63XX - select GENERIC_PINCONF -+ +--- a/drivers/pinctrl/bcm/Kconfig ++++ b/drivers/pinctrl/bcm/Kconfig +@@ -40,6 +40,17 @@ config PINCTRL_BCM6328 + help + Say Y here to enable the Broadcom BCM6328 GPIO driver. + +config PINCTRL_BCM6358 -+ bool "BCM6358 pincontrol driver" ++ bool "Broadcom BCM6358 GPIO driver" ++ depends on OF_GPIO && (BMIPS_GENERIC || COMPILE_TEST) + select PINMUX + select PINCONF -+ select PINCTRL_BCM63XX + select GENERIC_PINCONF + select MFD_SYSCON ---- a/drivers/pinctrl/bcm63xx/Makefile -+++ b/drivers/pinctrl/bcm63xx/Makefile -@@ -1,2 +1,3 @@ - obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o - obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o -+obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o ++ default BMIPS_GENERIC ++ help ++ Say Y here to enable the Broadcom BCM6358 GPIO driver. ++ + config PINCTRL_IPROC_GPIO + bool "Broadcom iProc GPIO (with PINCONF) driver" + depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST) +--- a/drivers/pinctrl/bcm/Makefile ++++ b/drivers/pinctrl/bcm/Makefile +@@ -4,6 +4,7 @@ + obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o + obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o + obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o ++obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o + obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o + obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o + obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o --- /dev/null -+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c -@@ -0,0 +1,390 @@ ++++ b/drivers/pinctrl/bcm/pinctrl-bcm6358.c +@@ -0,0 +1,526 @@ ++// SPDX-License-Identifier: GPL-2.0+ +/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. ++ * Driver for BCM6358 GPIO unit (pinctrl + GPIO) + * ++ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com> + * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com> + */ + -+#include <linux/kernel.h> +#include <linux/bitops.h> +#include <linux/gpio.h> -+#include <linux/gpio/driver.h> ++#include <linux/kernel.h> +#include <linux/mfd/syscon.h> +#include <linux/of.h> +#include <linux/of_gpio.h> -+#include <linux/of_address.h> -+#include <linux/slab.h> -+#include <linux/regmap.h> ++#include <linux/of_irq.h> +#include <linux/platform_device.h> ++#include <linux/regmap.h> + ++#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinmux.h> -+#include <linux/pinctrl/machine.h> + +#include "../core.h" +#include "../pinctrl-utils.h" + -+#include "pinctrl-bcm63xx.h" ++#define MODULE_NAME "bcm6358-pinctrl" ++#define BCM6358_NUM_GPIOS 40 + -+/* GPIO_MODE register */ -+#define BCM6358_MODE_MUX_NONE 0 ++#define BANK_SIZE sizeof(uint32_t) ++#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE) ++ ++#define BCM6358_DIROUT_REG 0x04 ++#define BCM6358_DATA_REG 0x0c ++#define BCM6358_MODE_REG 0x18 + -+/* overlays on gpio pins */ ++#define BCM6358_MODE_MUX_NONE 0 +#define BCM6358_MODE_MUX_EBI_CS BIT(5) +#define BCM6358_MODE_MUX_UART1 BIT(6) +#define BCM6358_MODE_MUX_SPI_CS BIT(7) @@ -86,17 +103,15 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> +#define BCM6358_MODE_MUX_PWM_SYN_CLK BIT(14) +#define BCM6358_MODE_MUX_SYS_IRQ BIT(15) + -+#define BCM6358_NGPIO 40 -+ +struct bcm6358_pingroup { + const char *name; + const unsigned * const pins; + const unsigned num_pins; + -+ const u16 mode_val; ++ const uint16_t mode_val; + + /* non-GPIO function muxes require the gpio direction to be set */ -+ const u16 direction; ++ const uint16_t direction; +}; + +struct bcm6358_function { @@ -107,12 +122,13 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> + +struct bcm6358_pinctrl { + struct device *dev; -+ struct pinctrl_dev *pctldev; -+ struct pinctrl_desc desc; -+ ++ struct regmap *regs; + struct regmap_field *overlays; + -+ struct gpio_chip gpio[2]; ++ struct pinctrl_dev *pctl_dev; ++ struct gpio_chip gpio_chip; ++ struct pinctrl_desc pctl_desc; ++ struct pinctrl_gpio_range gpio_range; +}; + +#define BCM6358_GPIO_PIN(a, b, bit1, bit2, bit3) \ @@ -271,6 +287,108 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> + BCM6358_FUN(sys_irq), +}; + ++static inline unsigned int bcm6358_bank_pin(unsigned int pin) ++{ ++ return pin % PINS_PER_BANK; ++} ++ ++static inline unsigned int bcm6358_reg_off(unsigned int reg, unsigned int pin) ++{ ++ return reg - (pin / PINS_PER_BANK) * BANK_SIZE; ++} ++ ++static int bcm6358_gpio_direction_input(struct gpio_chip *chip, ++ unsigned int pin) ++{ ++ struct bcm6358_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int dirout = bcm6358_reg_off(BCM6358_DIROUT_REG, pin); ++ unsigned int bank_pin = bcm6358_bank_pin(pin); ++ int ret; ++ ++ /* ++ * Check with the pinctrl driver whether this pin is usable as ++ * an input GPIO ++ */ ++ ret = pinctrl_gpio_direction_input(chip->base + pin); ++ if (ret) ++ return ret; ++ ++ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), 0); ++ ++ return 0; ++} ++ ++static int bcm6358_gpio_direction_output(struct gpio_chip *chip, ++ unsigned int pin, int value) ++{ ++ struct bcm6358_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int data = bcm6358_reg_off(BCM6358_DATA_REG, pin); ++ unsigned int dirout = bcm6358_reg_off(BCM6358_DIROUT_REG, pin); ++ unsigned int bank_pin = bcm6358_bank_pin(pin); ++ unsigned int val = value ? BIT(bank_pin) : 0; ++ int ret; ++ ++ /* ++ * Check with the pinctrl driver whether this pin is usable as ++ * an output GPIO ++ */ ++ ret = pinctrl_gpio_direction_output(chip->base + pin); ++ if (ret) ++ return ret; ++ ++ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), BIT(bank_pin)); ++ regmap_update_bits(pc->regs, data, BIT(bank_pin), val); ++ ++ return 0; ++} ++ ++static int bcm6358_gpio_get(struct gpio_chip *chip, unsigned int pin) ++{ ++ struct bcm6358_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int data = bcm6358_reg_off(BCM6358_DATA_REG, pin); ++ unsigned int bank_pin = bcm6358_bank_pin(pin); ++ unsigned int val; ++ ++ regmap_read(pc->regs, data, &val); ++ ++ return !!(val & BIT(bank_pin)); ++} ++ ++static int bcm6358_gpio_get_direction(struct gpio_chip *chip, unsigned int pin) ++{ ++ struct bcm6358_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int dirout = bcm6358_reg_off(BCM6358_DIROUT_REG, pin); ++ unsigned int bank_pin = bcm6358_bank_pin(pin); ++ unsigned int val; ++ ++ regmap_read(pc->regs, dirout, &val); ++ ++ if (val & BIT(bank_pin)) ++ return GPIO_LINE_DIRECTION_OUT; ++ ++ return GPIO_LINE_DIRECTION_IN; ++} ++ ++static void bcm6358_gpio_set(struct gpio_chip *chip, unsigned int pin, ++ int value) ++{ ++ struct bcm6358_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int data = bcm6358_reg_off(BCM6358_DATA_REG, pin); ++ unsigned int bank_pin = bcm6358_bank_pin(pin); ++ unsigned int val = value ? BIT(bank_pin) : 0; ++ ++ regmap_update_bits(pc->regs, data, BIT(bank_pin), val); ++} ++ ++static int bcm6358_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) ++{ ++ char irq_name[7]; ++ ++ sprintf(irq_name, "gpio%d", gpio); ++ ++ return of_irq_get_byname(chip->of_node, irq_name); ++} ++ +static int bcm6358_pinctrl_get_group_count(struct pinctrl_dev *pctldev) +{ + return ARRAY_SIZE(bcm6358_groups); @@ -317,25 +435,25 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> +static int bcm6358_pinctrl_set_mux(struct pinctrl_dev *pctldev, + unsigned selector, unsigned group) +{ -+ struct bcm6358_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); -+ const struct bcm6358_pingroup *grp = &bcm6358_groups[group]; -+ u32 val = grp->mode_val; -+ u32 mask = val; ++ struct bcm6358_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); ++ const struct bcm6358_pingroup *pg = &bcm6358_groups[group]; ++ unsigned int val = pg->mode_val; ++ unsigned int mask = val; + unsigned pin; + -+ for (pin = 0; pin < grp->num_pins; pin++) ++ for (pin = 0; pin < pg->num_pins; pin++) + mask |= (unsigned long)bcm6358_pins[pin].drv_data; + -+ regmap_field_update_bits(pctl->overlays, mask, val); ++ regmap_field_update_bits(pc->overlays, mask, val); + -+ for (pin = 0; pin < grp->num_pins; pin++) { ++ for (pin = 0; pin < pg->num_pins; pin++) { + int hw_gpio = bcm6358_pins[pin].number; -+ struct gpio_chip *gc = &pctl->gpio[hw_gpio / 32]; ++ struct gpio_chip *gc = &pc->gpio_chip; + -+ if (grp->direction & BIT(pin)) -+ gc->direction_output(gc, hw_gpio % 32, 0); ++ if (pg->direction & BIT(pin)) ++ gc->direction_output(gc, hw_gpio, 0); + else -+ gc->direction_input(gc, hw_gpio % 32); ++ gc->direction_input(gc, hw_gpio); + } + + return 0; @@ -345,73 +463,105 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> + struct pinctrl_gpio_range *range, + unsigned offset) +{ -+ struct bcm6358_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); -+ u32 mask; ++ struct bcm6358_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); ++ unsigned int mask; + -+ mask = (unsigned long)bcm6358_pins[offset].drv_data; ++ mask = (unsigned long) bcm6358_pins[offset].drv_data; + if (!mask) + return 0; + + /* disable all functions using this pin */ -+ return regmap_field_update_bits(pctl->overlays, mask, 0); ++ return regmap_field_update_bits(pc->overlays, mask, 0); +} + +static struct pinctrl_ops bcm6358_pctl_ops = { -+ .get_groups_count = bcm6358_pinctrl_get_group_count, -+ .get_group_name = bcm6358_pinctrl_get_group_name, -+ .get_group_pins = bcm6358_pinctrl_get_group_pins, -+#ifdef CONFIG_OF -+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, -+ .dt_free_map = pinctrl_utils_free_map, -+#endif ++ .get_groups_count = bcm6358_pinctrl_get_group_count, ++ .get_group_name = bcm6358_pinctrl_get_group_name, ++ .get_group_pins = bcm6358_pinctrl_get_group_pins, ++ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, ++ .dt_free_map = pinctrl_utils_free_map, +}; + +static struct pinmux_ops bcm6358_pmx_ops = { -+ .get_functions_count = bcm6358_pinctrl_get_func_count, -+ .get_function_name = bcm6358_pinctrl_get_func_name, -+ .get_function_groups = bcm6358_pinctrl_get_groups, -+ .set_mux = bcm6358_pinctrl_set_mux, -+ .gpio_request_enable = bcm6358_gpio_request_enable, -+ .strict = true, ++ .get_functions_count = bcm6358_pinctrl_get_func_count, ++ .get_function_name = bcm6358_pinctrl_get_func_name, ++ .get_function_groups = bcm6358_pinctrl_get_groups, ++ .set_mux = bcm6358_pinctrl_set_mux, ++ .gpio_request_enable = bcm6358_gpio_request_enable, ++ .strict = true, +}; + +static int bcm6358_pinctrl_probe(struct platform_device *pdev) +{ -+ struct bcm6358_pinctrl *pctl; -+ struct regmap *mode; -+ struct reg_field overlays = REG_FIELD(0, 0, 15); -+ -+ mode = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, -+ "brcm,gpiomode"); ++ struct reg_field overlays = REG_FIELD(BCM6358_MODE_REG, 0, 15); ++ struct device *dev = &pdev->dev; ++ struct device_node *np = dev->of_node; ++ struct bcm6358_pinctrl *pc; ++ int err; ++ ++ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL); ++ if (!pc) ++ return -ENOMEM; + -+ if (IS_ERR(mode)) -+ return PTR_ERR(mode); ++ platform_set_drvdata(pdev, pc); ++ pc->dev = dev; + -+ pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL); -+ if (!pctl) -+ return -ENOMEM; ++ pc->regs = syscon_node_to_regmap(dev->parent->of_node); ++ if (IS_ERR(pc->regs)) ++ return PTR_ERR(pc->regs); + -+ pctl->overlays = devm_regmap_field_alloc(&pdev->dev, mode, overlays); -+ if (IS_ERR(pctl->overlays)) -+ return PTR_ERR(pctl->overlays); ++ pc->overlays = devm_regmap_field_alloc(&pdev->dev, pc->regs, overlays); ++ if (IS_ERR(pc->overlays)) ++ return PTR_ERR(pc->overlays); + + /* disable all muxes by default */ -+ regmap_field_write(pctl->overlays, 0); -+ -+ pctl->desc.name = dev_name(&pdev->dev); -+ pctl->desc.owner = THIS_MODULE; -+ pctl->desc.pctlops = &bcm6358_pctl_ops; -+ pctl->desc.pmxops = &bcm6358_pmx_ops; ++ regmap_field_write(pc->overlays, 0); ++ ++ pc->gpio_chip.label = MODULE_NAME; ++ pc->gpio_chip.owner = THIS_MODULE; ++ pc->gpio_chip.request = gpiochip_generic_request; ++ pc->gpio_chip.free = gpiochip_generic_free; ++ pc->gpio_chip.direction_input = bcm6358_gpio_direction_input; ++ pc->gpio_chip.direction_output = bcm6358_gpio_direction_output; ++ pc->gpio_chip.get_direction = bcm6358_gpio_get_direction; ++ pc->gpio_chip.get = bcm6358_gpio_get; ++ pc->gpio_chip.set = bcm6358_gpio_set; ++ pc->gpio_chip.set_config = gpiochip_generic_config; ++ pc->gpio_chip.base = -1; ++ pc->gpio_chip.ngpio = BCM6358_NUM_GPIOS; ++ pc->gpio_chip.can_sleep = false; ++ pc->gpio_chip.parent = dev; ++ pc->gpio_chip.of_node = np; ++ ++ if (of_get_property(np, "interrupt-names", NULL)) ++ pc->gpio_chip.to_irq = bcm6358_gpio_to_irq; ++ ++ err = gpiochip_add_data(&pc->gpio_chip, pc); ++ if (err) { ++ dev_err(dev, "could not add GPIO chip\n"); ++ return err; ++ } + -+ pctl->desc.npins = ARRAY_SIZE(bcm6358_pins); -+ pctl->desc.pins = bcm6358_pins; ++ pc->pctl_desc.name = MODULE_NAME, ++ pc->pctl_desc.pins = bcm6358_pins, ++ pc->pctl_desc.npins = ARRAY_SIZE(bcm6358_pins), ++ pc->pctl_desc.pctlops = &bcm6358_pctl_ops, ++ pc->pctl_desc.pmxops = &bcm6358_pmx_ops, ++ pc->pctl_desc.owner = THIS_MODULE, ++ ++ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc); ++ if (IS_ERR(pc->pctl_dev)) { ++ gpiochip_remove(&pc->gpio_chip); ++ return PTR_ERR(pc->pctl_dev); ++ } + -+ platform_set_drvdata(pdev, pctl); ++ pc->gpio_range.name = MODULE_NAME; ++ pc->gpio_range.npins = BCM6358_NUM_GPIOS; ++ pc->gpio_range.base = pc->gpio_chip.base; ++ pc->gpio_range.gc = &pc->gpio_chip; ++ pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range); + -+ pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl, -+ pctl->gpio, BCM6358_NGPIO); -+ if (IS_ERR(pctl->pctldev)) -+ return PTR_ERR(pctl->pctldev); ++ dev_info(dev, "registered\n"); + + return 0; +} @@ -424,7 +574,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> +static struct platform_driver bcm6358_pinctrl_driver = { + .probe = bcm6358_pinctrl_probe, + .driver = { -+ .name = "bcm6358-pinctrl", ++ .name = MODULE_NAME, + .of_match_table = bcm6358_pinctrl_match, + }, +}; diff --git a/target/linux/bmips/patches-5.10/404-Documentation-add-BCM6362-pincontroller-binding-docu.patch b/target/linux/bmips/patches-5.10/404-Documentation-add-BCM6362-pincontroller-binding-docu.patch new file mode 100644 index 0000000000..18739091aa --- /dev/null +++ b/target/linux/bmips/patches-5.10/404-Documentation-add-BCM6362-pincontroller-binding-docu.patch @@ -0,0 +1,261 @@ +From 1c839f287a008023b3b3ae7d892b4d25e3d224ad Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com> +Date: Wed, 27 Jul 2016 11:36:18 +0200 +Subject: [PATCH 05/12] Documentation: add BCM6362 pincontroller binding + documentation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add binding documentation for the pincontrol core found in BCM6362 SoCs. + +Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> +Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> +--- + .../pinctrl/brcm,bcm6362-pinctrl.yaml | 240 ++++++++++++++++++ + 1 file changed, 240 insertions(+) + create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml +@@ -0,0 +1,240 @@ ++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6362-pinctrl.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Broadcom BCM6362 pin controller ++ ++maintainers: ++ - Álvaro Fernández Rojas <noltari@gmail.com> ++ - Jonas Gorski <jonas.gorski@gmail.com> ++ ++description: |+ ++ The pin controller node should be the child of a syscon node. ++ ++ Refer to the the bindings described in ++ Documentation/devicetree/bindings/mfd/syscon.yaml ++ ++properties: ++ compatible: ++ const: brcm,bcm6362-pinctrl ++ ++ gpio-controller: true ++ ++ '#gpio-cells': ++ description: ++ Specifies the pin number and flags, as defined in ++ include/dt-bindings/gpio/gpio.h ++ const: 2 ++ ++ interrupts-extended: ++ description: ++ One interrupt per each of the 4 GPIO ports supported by the controller, ++ sorted by port number ascending order. ++ minItems: 4 ++ maxItems: 4 ++ ++patternProperties: ++ '^.*$': ++ if: ++ type: object ++ then: ++ properties: ++ function: ++ $ref: "/schemas/types.yaml#/definitions/string" ++ enum: [ usb_device_led, sys_irq, serial_led_clk, serial_led_data, ++ robosw_led_data, robosw_led_clk, robosw_led0, robosw_led1, ++ inet_led, spi_cs2, spi_cs3, ntr_pulse, uart1_scts, ++ uart1_srts, uart1_sdin, uart1_sdout, adsl_spi_miso, ++ adsl_spi_mosi, adsl_spi_clk, adsl_spi_cs, ephy0_led, ++ ephy1_led, ephy2_led, ephy3_led, ext_irq0, ext_irq1, ++ ext_irq2, ext_irq3, nand ] ++ ++ pins: ++ $ref: "/schemas/types.yaml#/definitions/string" ++ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, ++ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, ++ gpio15, gpio16, gpio17, gpio18, gpio19, gpio20, gpio21, ++ gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, nand_grp ] ++ ++required: ++ - compatible ++ - gpio-controller ++ - '#gpio-cells' ++ ++additionalProperties: false ++ ++examples: ++ - | ++ gpio@10000080 { ++ compatible = "syscon", "simple-mfd"; ++ reg = <0x10000080 0x80>; ++ ++ pinctrl: pinctrl { ++ compatible = "brcm,bcm6362-pinctrl"; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ interrupts-extended = <&ext_intc 0 0>, ++ <&ext_intc 1 0>, ++ <&ext_intc 2 0>, ++ <&ext_intc 3 0>; ++ interrupt-names = "gpio24", ++ "gpio25", ++ "gpio26", ++ "gpio27"; ++ ++ pinctrl_usb_device_led: usb_device_led { ++ function = "usb_device_led"; ++ pins = "gpio0"; ++ }; ++ ++ pinctrl_sys_irq: sys_irq { ++ function = "sys_irq"; ++ pins = "gpio1"; ++ }; ++ ++ pinctrl_serial_led: serial_led { ++ pinctrl_serial_led_clk: serial_led_clk { ++ function = "serial_led_clk"; ++ pins = "gpio2"; ++ }; ++ ++ pinctrl_serial_led_data: serial_led_data { ++ function = "serial_led_data"; ++ pins = "gpio3"; ++ }; ++ }; ++ ++ pinctrl_robosw_led_data: robosw_led_data { ++ function = "robosw_led_data"; ++ pins = "gpio4"; ++ }; ++ ++ pinctrl_robosw_led_clk: robosw_led_clk { ++ function = "robosw_led_clk"; ++ pins = "gpio5"; ++ }; ++ ++ pinctrl_robosw_led0: robosw_led0 { ++ function = "robosw_led0"; ++ pins = "gpio6"; ++ }; ++ ++ pinctrl_robosw_led1: robosw_led1 { ++ function = "robosw_led1"; ++ pins = "gpio7"; ++ }; ++ ++ pinctrl_inet_led: inet_led { ++ function = "inet_led"; ++ pins = "gpio8"; ++ }; ++ ++ pinctrl_spi_cs2: spi_cs2 { ++ function = "spi_cs2"; ++ pins = "gpio9"; ++ }; ++ ++ pinctrl_spi_cs3: spi_cs3 { ++ function = "spi_cs3"; ++ pins = "gpio10"; ++ }; ++ ++ pinctrl_ntr_pulse: ntr_pulse { ++ function = "ntr_pulse"; ++ pins = "gpio11"; ++ }; ++ ++ pinctrl_uart1_scts: uart1_scts { ++ function = "uart1_scts"; ++ pins = "gpio12"; ++ }; ++ ++ pinctrl_uart1_srts: uart1_srts { ++ function = "uart1_srts"; ++ pins = "gpio13"; ++ }; ++ ++ pinctrl_uart1: uart1 { ++ pinctrl_uart1_sdin: uart1_sdin { ++ function = "uart1_sdin"; ++ pins = "gpio14"; ++ }; ++ ++ pinctrl_uart1_sdout: uart1_sdout { ++ function = "uart1_sdout"; ++ pins = "gpio15"; ++ }; ++ }; ++ ++ pinctrl_adsl_spi: adsl_spi { ++ pinctrl_adsl_spi_miso: adsl_spi_miso { ++ function = "adsl_spi_miso"; ++ pins = "gpio16"; ++ }; ++ ++ pinctrl_adsl_spi_mosi: adsl_spi_mosi { ++ function = "adsl_spi_mosi"; ++ pins = "gpio17"; ++ }; ++ ++ pinctrl_adsl_spi_clk: adsl_spi_clk { ++ function = "adsl_spi_clk"; ++ pins = "gpio18"; ++ }; ++ ++ pinctrl_adsl_spi_cs: adsl_spi_cs { ++ function = "adsl_spi_cs"; ++ pins = "gpio19"; ++ }; ++ }; ++ ++ pinctrl_ephy0_led: ephy0_led { ++ function = "ephy0_led"; ++ pins = "gpio20"; ++ }; ++ ++ pinctrl_ephy1_led: ephy1_led { ++ function = "ephy1_led"; ++ pins = "gpio21"; ++ }; ++ ++ pinctrl_ephy2_led: ephy2_led { ++ function = "ephy2_led"; ++ pins = "gpio22"; ++ }; ++ ++ pinctrl_ephy3_led: ephy3_led { ++ function = "ephy3_led"; ++ pins = "gpio23"; ++ }; ++ ++ pinctrl_ext_irq0: ext_irq0 { ++ function = "ext_irq0"; ++ pins = "gpio24"; ++ }; ++ ++ pinctrl_ext_irq1: ext_irq1 { ++ function = "ext_irq1"; ++ pins = "gpio25"; ++ }; ++ ++ pinctrl_ext_irq2: ext_irq2 { ++ function = "ext_irq2"; ++ pins = "gpio26"; ++ }; ++ ++ pinctrl_ext_irq3: ext_irq3 { ++ function = "ext_irq3"; ++ pins = "gpio27"; ++ }; ++ ++ pinctrl_nand: nand { ++ function = "nand"; ++ group = "nand_grp"; ++ }; ++ }; ++ }; diff --git a/target/linux/bmips/patches-5.10/405-Documentation-add-BCM6362-pincontroller-binding-docu.patch b/target/linux/bmips/patches-5.10/405-Documentation-add-BCM6362-pincontroller-binding-docu.patch deleted file mode 100644 index 9fc424cb4c..0000000000 --- a/target/linux/bmips/patches-5.10/405-Documentation-add-BCM6362-pincontroller-binding-docu.patch +++ /dev/null @@ -1,96 +0,0 @@ -From ba03ea8ada2ca71c9095d96a1e4085c2c5cf0e69 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jonas.gorski@gmail.com> -Date: Wed, 27 Jul 2016 11:36:18 +0200 -Subject: [PATCH 08/16] Documentation: add BCM6362 pincontroller binding - documentation - -Add binding documentation for the pincontrol core found in BCM6362 SoCs. - -Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> ---- - .../bindings/pinctrl/brcm,bcm6362-pinctrl.txt | 79 ++++++++++++++++++++++ - 1 file changed, 79 insertions(+) - create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.txt -@@ -0,0 +1,79 @@ -+* Broadcom BCM6362 pin controller -+ -+Required properties: -+- compatible: Must be "brcm,bcm6362-pinctrl" -+- reg: Register specifiers of dirout, dat, led, mode, ctrl, basemode registers. -+- reg-names: Must be "dirout", "dat", "led", "mode", "ctrl", "basemode". -+- gpio-controller: Identifies this node as a GPIO controller. -+- #gpio-cells: Must be <2>. -+ -+Example: -+ -+pinctrl: pin-controller@10000080 { -+ compatible = "brcm,bcm6362-pinctrl"; -+ reg = <0x10000080 0x8>, -+ <0x10000088 0x8>, -+ <0x10000090 0x4>, -+ <0x10000098 0x4>, -+ <0x1000009c 0x4>, -+ <0x100000b8 0x4>; -+ reg-names = "dirout", "dat", "led", -+ "mode", "ctrl", "basemode"; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+}; -+ -+Available pins/groups and functions: -+ -+name pins functions -+----------------------------------------------------------- -+gpio0 0 led, usb_device_led -+gpio1 1 led, sys_irq -+gpio2 2 led, serial_led_clk -+gpio3 3 led, serial_led_data -+gpio4 4 led, robosw_led_data -+gpio5 5 led, robosw_led_clk -+gpio6 6 led, robosw_led0 -+gpio7 7 led, robosw_led1 -+gpio8 8 led, inet_led -+gpio9 9 led, spi_cs2 -+gpio10 10 led, spi_cs3 -+gpio11 11 led, ntr_pulse -+gpio12 12 led, uart1_scts -+gpio13 13 led, uart1_srts -+gpio14 14 led, uart1_sdin -+gpio15 15 led, uart1_sdout -+gpio16 16 led, adsl_spi_miso -+gpio17 17 led, adsl_spi_mosi -+gpio18 18 led, adsl_spi_clk -+gpio19 19 led, adsl_spi_cs -+gpio20 20 led, ephy0_led -+gpio21 21 led, ephy1_led -+gpio22 22 led, ephy2_led -+gpio23 23 led, ephy3_led -+gpio24 24 ext_irq0 -+gpio25 25 ext_irq1 -+gpio26 26 ext_irq2 -+gpio27 27 ext_irq3 -+gpio28 28 - -+gpio29 29 - -+gpio30 30 - -+gpio31 31 - -+gpio32 32 wifi -+gpio33 33 wifi -+gpio34 34 wifi -+gpio35 35 wifi -+gpio36 36 wifi -+gpio37 37 wifi -+gpio38 38 wifi -+gpio39 39 wifi -+gpio40 40 wifi -+gpio41 41 wifi -+gpio42 42 wifi -+gpio43 43 wifi -+gpio44 44 wifi -+gpio45 45 wifi -+gpio46 46 wifi -+gpio47 47 wifi -+nand_grp 8, 12-23, 27 nand diff --git a/target/linux/bmips/patches-5.10/406-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch b/target/linux/bmips/patches-5.10/405-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch index 30b95158e4..bfc6620ace 100644 --- a/target/linux/bmips/patches-5.10/406-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch +++ b/target/linux/bmips/patches-5.10/405-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch @@ -1,75 +1,98 @@ -From eea6b96701d734095e2f823f3a82d9b063f553ae Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jonas.gorski@gmail.com> +From 2872fcb5eac02d3a74d696e6350410a9e66281b4 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com> Date: Fri, 24 Jun 2016 22:17:20 +0200 -Subject: [PATCH 09/16] pinctrl: add a pincontrol driver for BCM6362 +Subject: [PATCH 06/12] pinctrl: add a pincontrol driver for BCM6362 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit Add a pincotrol driver for BCM6362. BCM6362 allows muxing individual GPIO pins to the LED controller, to be available by the integrated wifi, or other functions. It also supports overlay groups, of which only NAND is documented. +Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> --- - drivers/pinctrl/bcm63xx/Kconfig | 7 + - drivers/pinctrl/bcm63xx/Makefile | 1 + - drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c | 692 ++++++++++++++++++++++++++++++ - 3 files changed, 700 insertions(+) - create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c + drivers/pinctrl/bcm/Kconfig | 11 + + drivers/pinctrl/bcm/Makefile | 1 + + drivers/pinctrl/bcm/pinctrl-bcm6362.c | 794 ++++++++++++++++++++++++++ + 3 files changed, 806 insertions(+) + create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6362.c ---- a/drivers/pinctrl/bcm63xx/Kconfig -+++ b/drivers/pinctrl/bcm63xx/Kconfig -@@ -16,3 +16,10 @@ config PINCTRL_BCM6358 - select PINCTRL_BCM63XX - select GENERIC_PINCONF - select MFD_SYSCON -+ +--- a/drivers/pinctrl/bcm/Kconfig ++++ b/drivers/pinctrl/bcm/Kconfig +@@ -51,6 +51,17 @@ config PINCTRL_BCM6358 + help + Say Y here to enable the Broadcom BCM6358 GPIO driver. + +config PINCTRL_BCM6362 -+ bool "BCM6362 pincontrol driver" ++ bool "Broadcom BCM6362 GPIO driver" ++ depends on OF_GPIO && (BMIPS_GENERIC || COMPILE_TEST) + select PINMUX + select PINCONF -+ select PINCTRL_BCM63XX + select GENERIC_PINCONF ---- a/drivers/pinctrl/bcm63xx/Makefile -+++ b/drivers/pinctrl/bcm63xx/Makefile -@@ -1,3 +1,4 @@ - obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o - obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o - obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o -+obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o ++ select MFD_SYSCON ++ default BMIPS_GENERIC ++ help ++ Say Y here to enable the Broadcom BCM6362 GPIO driver. ++ + config PINCTRL_IPROC_GPIO + bool "Broadcom iProc GPIO (with PINCONF) driver" + depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST) +--- a/drivers/pinctrl/bcm/Makefile ++++ b/drivers/pinctrl/bcm/Makefile +@@ -5,6 +5,7 @@ obj-$(CONFIG_PINCTRL_BCM281XX) += pinct + obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o + obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o + obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o ++obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o + obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o + obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o + obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o --- /dev/null -+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c -@@ -0,0 +1,692 @@ ++++ b/drivers/pinctrl/bcm/pinctrl-bcm6362.c +@@ -0,0 +1,794 @@ ++// SPDX-License-Identifier: GPL-2.0+ +/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. ++ * Driver for BCM6362 GPIO unit (pinctrl + GPIO) + * ++ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com> + * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com> + */ + -+#include <linux/kernel.h> -+#include <linux/spinlock.h> +#include <linux/bitops.h> +#include <linux/gpio.h> ++#include <linux/kernel.h> ++#include <linux/mfd/syscon.h> +#include <linux/of.h> +#include <linux/of_gpio.h> -+#include <linux/slab.h> ++#include <linux/of_irq.h> +#include <linux/platform_device.h> ++#include <linux/regmap.h> + ++#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinmux.h> -+#include <linux/pinctrl/machine.h> + +#include "../core.h" +#include "../pinctrl-utils.h" + -+#include "pinctrl-bcm63xx.h" ++#define MODULE_NAME "bcm6362-pinctrl" ++#define BCM6362_NUM_GPIOS 48 ++#define BCM6362_NUM_LEDS 24 + -+#define BCM6362_NGPIO 48 ++#define BANK_SIZE sizeof(uint32_t) ++#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE) + -+/* GPIO_BASEMODE register */ -+#define BASEMODE_NAND BIT(2) ++#define BCM6362_DIROUT_REG 0x04 ++#define BCM6362_DATA_REG 0x0c ++#define BCM6362_LED_REG 0x10 ++#define BCM6362_MODE_REG 0x18 ++#define BCM6362_CTRL_REG 0x1c ++#define BCM6362_BASEMODE_REG 0x38 ++#define BASEMODE_NAND BIT(2) + +enum bcm6362_pinctrl_reg { + BCM6362_LEDCTRL, @@ -90,22 +113,17 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> + const unsigned num_groups; + + enum bcm6362_pinctrl_reg reg; -+ u32 basemode_mask; ++ uint32_t basemode_mask; +}; + +struct bcm6362_pinctrl { -+ struct pinctrl_dev *pctldev; -+ struct pinctrl_desc desc; -+ -+ void __iomem *led; -+ void __iomem *mode; -+ void __iomem *ctrl; -+ void __iomem *basemode; -+ -+ /* register access lock */ -+ spinlock_t lock; ++ struct device *dev; ++ struct regmap *regs; + -+ struct gpio_chip gpio[2]; ++ struct pinctrl_dev *pctl_dev; ++ struct gpio_chip gpio_chip; ++ struct pinctrl_desc pctl_desc; ++ struct pinctrl_gpio_range gpio_range; +}; + +#define BCM6362_PIN(a, b, mask) \ @@ -508,6 +526,108 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> + BCM6362_BASEMODE_FUN(nand, BASEMODE_NAND), +}; + ++static inline unsigned int bcm6362_bank_pin(unsigned int pin) ++{ ++ return pin % PINS_PER_BANK; ++} ++ ++static inline unsigned int bcm6362_reg_off(unsigned int reg, unsigned int pin) ++{ ++ return reg - (pin / PINS_PER_BANK) * BANK_SIZE; ++} ++ ++static int bcm6362_gpio_direction_input(struct gpio_chip *chip, ++ unsigned int pin) ++{ ++ struct bcm6362_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int dirout = bcm6362_reg_off(BCM6362_DIROUT_REG, pin); ++ unsigned int bank_pin = bcm6362_bank_pin(pin); ++ int ret; ++ ++ /* ++ * Check with the pinctrl driver whether this pin is usable as ++ * an input GPIO ++ */ ++ ret = pinctrl_gpio_direction_input(chip->base + pin); ++ if (ret) ++ return ret; ++ ++ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), 0); ++ ++ return 0; ++} ++ ++static int bcm6362_gpio_direction_output(struct gpio_chip *chip, ++ unsigned int pin, int value) ++{ ++ struct bcm6362_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int data = bcm6362_reg_off(BCM6362_DATA_REG, pin); ++ unsigned int dirout = bcm6362_reg_off(BCM6362_DIROUT_REG, pin); ++ unsigned int bank_pin = bcm6362_bank_pin(pin); ++ unsigned int val = value ? BIT(bank_pin) : 0; ++ int ret; ++ ++ /* ++ * Check with the pinctrl driver whether this pin is usable as ++ * an output GPIO ++ */ ++ ret = pinctrl_gpio_direction_output(chip->base + pin); ++ if (ret) ++ return ret; ++ ++ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), BIT(bank_pin)); ++ regmap_update_bits(pc->regs, data, BIT(bank_pin), val); ++ ++ return 0; ++} ++ ++static int bcm6362_gpio_get(struct gpio_chip *chip, unsigned int pin) ++{ ++ struct bcm6362_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int data = bcm6362_reg_off(BCM6362_DATA_REG, pin); ++ unsigned int bank_pin = bcm6362_bank_pin(pin); ++ unsigned int val; ++ ++ regmap_read(pc->regs, data, &val); ++ ++ return !!(val & BIT(bank_pin)); ++} ++ ++static int bcm6362_gpio_get_direction(struct gpio_chip *chip, unsigned int pin) ++{ ++ struct bcm6362_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int dirout = bcm6362_reg_off(BCM6362_DIROUT_REG, pin); ++ unsigned int bank_pin = bcm6362_bank_pin(pin); ++ unsigned int val; ++ ++ regmap_read(pc->regs, dirout, &val); ++ ++ if (val & BIT(bank_pin)) ++ return GPIO_LINE_DIRECTION_OUT; ++ ++ return GPIO_LINE_DIRECTION_IN; ++} ++ ++static void bcm6362_gpio_set(struct gpio_chip *chip, unsigned int pin, ++ int value) ++{ ++ struct bcm6362_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int data = bcm6362_reg_off(BCM6362_DATA_REG, pin); ++ unsigned int bank_pin = bcm6362_bank_pin(pin); ++ unsigned int val = value ? BIT(bank_pin) : 0; ++ ++ regmap_update_bits(pc->regs, data, BIT(bank_pin), val); ++} ++ ++static int bcm6362_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) ++{ ++ char irq_name[7]; ++ ++ sprintf(irq_name, "gpio%d", gpio); ++ ++ return of_irq_get_byname(chip->of_node, irq_name); ++} ++ +static int bcm6362_pinctrl_get_group_count(struct pinctrl_dev *pctldev) +{ + return ARRAY_SIZE(bcm6362_groups); @@ -551,73 +671,59 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> + return 0; +} + -+static void bcm6362_rmw_mux(struct bcm6362_pinctrl *pctl, void __iomem *reg, -+ u32 mask, u32 val) -+{ -+ unsigned long flags; -+ u32 tmp; -+ -+ spin_lock_irqsave(&pctl->lock, flags); -+ tmp = __raw_readl(reg); -+ tmp &= ~mask; -+ tmp |= val & mask; -+ __raw_writel(tmp, reg); -+ -+ spin_unlock_irqrestore(&pctl->lock, flags); -+} -+ -+static void bcm6362_set_gpio(struct bcm6362_pinctrl *pctl, unsigned pin) ++static void bcm6362_set_gpio(struct bcm6362_pinctrl *pc, unsigned pin) +{ + const struct pinctrl_pin_desc *desc = &bcm6362_pins[pin]; -+ u32 mask = BIT(pin % 32); ++ unsigned int mask = bcm6362_bank_pin(pin); + + if (desc->drv_data) -+ bcm6362_rmw_mux(pctl, pctl->basemode, (u32)desc->drv_data, 0); ++ regmap_update_bits(pc->regs, BCM6362_BASEMODE_REG, ++ (uint32_t) desc->drv_data, 0); + -+ if (pin < 32) { ++ if (pin < PINS_PER_BANK) { + /* base mode 0 => gpio 1 => mux function */ -+ bcm6362_rmw_mux(pctl, pctl->mode, mask, 0); ++ regmap_update_bits(pc->regs, BCM6362_MODE_REG, mask, 0); + + /* pins 0-23 might be muxed to led */ -+ if (pin < 24) -+ bcm6362_rmw_mux(pctl, pctl->led, mask, 0); ++ if (pin < BCM6362_NUM_LEDS) ++ regmap_update_bits(pc->regs, BCM6362_LED_REG, mask, 0); + } else { + /* ctrl reg 0 => wifi function 1 => gpio */ -+ bcm6362_rmw_mux(pctl, pctl->ctrl, mask, mask); ++ regmap_update_bits(pc->regs, BCM6362_CTRL_REG, mask, mask); + } +} + +static int bcm6362_pinctrl_set_mux(struct pinctrl_dev *pctldev, + unsigned selector, unsigned group) +{ -+ struct bcm6362_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); -+ const struct bcm6362_pingroup *grp = &bcm6362_groups[group]; ++ struct bcm6362_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); ++ const struct bcm6362_pingroup *pg = &bcm6362_groups[group]; + const struct bcm6362_function *f = &bcm6362_funcs[selector]; + unsigned i; -+ void __iomem *reg; -+ u32 val, mask; ++ unsigned int reg; ++ unsigned int val, mask; + -+ for (i = 0; i < grp->num_pins; i++) -+ bcm6362_set_gpio(pctl, grp->pins[i]); ++ for (i = 0; i < pg->num_pins; i++) ++ bcm6362_set_gpio(pc, pg->pins[i]); + + switch (f->reg) { + case BCM6362_LEDCTRL: -+ reg = pctl->led; -+ mask = BIT(grp->pins[0]); -+ val = BIT(grp->pins[0]); ++ reg = BCM6362_LED_REG; ++ mask = BIT(pg->pins[0]); ++ val = BIT(pg->pins[0]); + break; + case BCM6362_MODE: -+ reg = pctl->mode; -+ mask = BIT(grp->pins[0]); -+ val = BIT(grp->pins[0]); ++ reg = BCM6362_MODE_REG; ++ mask = BIT(pg->pins[0]); ++ val = BIT(pg->pins[0]); + break; + case BCM6362_CTRL: -+ reg = pctl->ctrl; -+ mask = BIT(grp->pins[0]); ++ reg = BCM6362_CTRL_REG; ++ mask = BIT(pg->pins[0]); + val = 0; + break; + case BCM6362_BASEMODE: -+ reg = pctl->basemode; ++ reg = BCM6362_BASEMODE_REG; + mask = f->basemode_mask; + val = f->basemode_mask; + break; @@ -626,7 +732,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> + return -EINVAL; + } + -+ bcm6362_rmw_mux(pctl, reg, mask, val); ++ regmap_update_bits(pc->regs, reg, mask, val); + + return 0; +} @@ -635,84 +741,94 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> + struct pinctrl_gpio_range *range, + unsigned offset) +{ -+ struct bcm6362_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); ++ struct bcm6362_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); + + /* disable all functions using this pin */ -+ bcm6362_set_gpio(pctl, offset); ++ bcm6362_set_gpio(pc, offset); + + return 0; +} + +static struct pinctrl_ops bcm6362_pctl_ops = { -+ .get_groups_count = bcm6362_pinctrl_get_group_count, -+ .get_group_name = bcm6362_pinctrl_get_group_name, -+ .get_group_pins = bcm6362_pinctrl_get_group_pins, -+#ifdef CONFIG_OF -+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, -+ .dt_free_map = pinctrl_utils_free_map, -+#endif ++ .get_groups_count = bcm6362_pinctrl_get_group_count, ++ .get_group_name = bcm6362_pinctrl_get_group_name, ++ .get_group_pins = bcm6362_pinctrl_get_group_pins, ++ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, ++ .dt_free_map = pinctrl_utils_free_map, +}; + +static struct pinmux_ops bcm6362_pmx_ops = { -+ .get_functions_count = bcm6362_pinctrl_get_func_count, -+ .get_function_name = bcm6362_pinctrl_get_func_name, -+ .get_function_groups = bcm6362_pinctrl_get_groups, -+ .set_mux = bcm6362_pinctrl_set_mux, -+ .gpio_request_enable = bcm6362_gpio_request_enable, -+ .strict = true, ++ .get_functions_count = bcm6362_pinctrl_get_func_count, ++ .get_function_name = bcm6362_pinctrl_get_func_name, ++ .get_function_groups = bcm6362_pinctrl_get_groups, ++ .set_mux = bcm6362_pinctrl_set_mux, ++ .gpio_request_enable = bcm6362_gpio_request_enable, ++ .strict = true, +}; + +static int bcm6362_pinctrl_probe(struct platform_device *pdev) +{ -+ struct bcm6362_pinctrl *pctl; -+ struct resource *res; -+ void __iomem *led, *mode, *ctrl, *basemode; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "led"); -+ led = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(led)) -+ return PTR_ERR(led); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode"); -+ mode = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(mode)) -+ return PTR_ERR(mode); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl"); -+ ctrl = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(ctrl)) -+ return PTR_ERR(ctrl); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "basemode"); -+ basemode = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(basemode)) -+ return PTR_ERR(basemode); -+ -+ pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL); -+ if (!pctl) -+ return -ENOMEM; -+ -+ spin_lock_init(&pctl->lock); ++ struct device *dev = &pdev->dev; ++ struct device_node *np = dev->of_node; ++ struct bcm6362_pinctrl *pc; ++ int err; + -+ pctl->led = led; -+ pctl->mode = mode; -+ pctl->ctrl = ctrl; -+ pctl->basemode = basemode; ++ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL); ++ if (!pc) ++ return -ENOMEM; + -+ pctl->desc.name = dev_name(&pdev->dev); -+ pctl->desc.owner = THIS_MODULE; -+ pctl->desc.pctlops = &bcm6362_pctl_ops; -+ pctl->desc.pmxops = &bcm6362_pmx_ops; ++ platform_set_drvdata(pdev, pc); ++ pc->dev = dev; ++ ++ pc->regs = syscon_node_to_regmap(dev->parent->of_node); ++ if (IS_ERR(pc->regs)) ++ return PTR_ERR(pc->regs); ++ ++ pc->gpio_chip.label = MODULE_NAME; ++ pc->gpio_chip.owner = THIS_MODULE; ++ pc->gpio_chip.request = gpiochip_generic_request; ++ pc->gpio_chip.free = gpiochip_generic_free; ++ pc->gpio_chip.direction_input = bcm6362_gpio_direction_input; ++ pc->gpio_chip.direction_output = bcm6362_gpio_direction_output; ++ pc->gpio_chip.get_direction = bcm6362_gpio_get_direction; ++ pc->gpio_chip.get = bcm6362_gpio_get; ++ pc->gpio_chip.set = bcm6362_gpio_set; ++ pc->gpio_chip.set_config = gpiochip_generic_config; ++ pc->gpio_chip.base = -1; ++ pc->gpio_chip.ngpio = BCM6362_NUM_GPIOS; ++ pc->gpio_chip.can_sleep = false; ++ pc->gpio_chip.parent = dev; ++ pc->gpio_chip.of_node = np; ++ ++ if (of_get_property(np, "interrupt-names", NULL)) ++ pc->gpio_chip.to_irq = bcm6362_gpio_to_irq; ++ ++ err = gpiochip_add_data(&pc->gpio_chip, pc); ++ if (err) { ++ dev_err(dev, "could not add GPIO chip\n"); ++ return err; ++ } + -+ pctl->desc.npins = ARRAY_SIZE(bcm6362_pins); -+ pctl->desc.pins = bcm6362_pins; ++ pc->pctl_desc.name = MODULE_NAME, ++ pc->pctl_desc.pins = bcm6362_pins, ++ pc->pctl_desc.npins = ARRAY_SIZE(bcm6362_pins), ++ pc->pctl_desc.pctlops = &bcm6362_pctl_ops, ++ pc->pctl_desc.pmxops = &bcm6362_pmx_ops, ++ pc->pctl_desc.owner = THIS_MODULE, ++ ++ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc); ++ if (IS_ERR(pc->pctl_dev)) { ++ gpiochip_remove(&pc->gpio_chip); ++ return PTR_ERR(pc->pctl_dev); ++ } + -+ platform_set_drvdata(pdev, pctl); ++ pc->gpio_range.name = MODULE_NAME; ++ pc->gpio_range.npins = BCM6362_NUM_GPIOS; ++ pc->gpio_range.base = pc->gpio_chip.base; ++ pc->gpio_range.gc = &pc->gpio_chip; ++ pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range); + -+ pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl, -+ pctl->gpio, BCM6362_NGPIO); -+ if (IS_ERR(pctl->pctldev)) -+ return PTR_ERR(pctl->pctldev); ++ dev_info(dev, "registered\n"); + + return 0; +} @@ -725,7 +841,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> +static struct platform_driver bcm6362_pinctrl_driver = { + .probe = bcm6362_pinctrl_probe, + .driver = { -+ .name = "bcm6362-pinctrl", ++ .name = MODULE_NAME, + .of_match_table = bcm6362_pinctrl_match, + }, +}; diff --git a/target/linux/bmips/patches-5.10/406-Documentation-add-BCM6368-pincontroller-binding-docu.patch b/target/linux/bmips/patches-5.10/406-Documentation-add-BCM6368-pincontroller-binding-docu.patch new file mode 100644 index 0000000000..59fbdaeaaa --- /dev/null +++ b/target/linux/bmips/patches-5.10/406-Documentation-add-BCM6368-pincontroller-binding-docu.patch @@ -0,0 +1,276 @@ +From 12f1d5123ee405266596eaea238d9810e0628d18 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com> +Date: Wed, 27 Jul 2016 11:36:51 +0200 +Subject: [PATCH 07/12] Documentation: add BCM6368 pincontroller binding + documentation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add binding documentation for the pincontrol core found in BCM6368 SoCs. + +Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> +Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> +--- + .../pinctrl/brcm,bcm6368-pinctrl.yaml | 255 ++++++++++++++++++ + 1 file changed, 255 insertions(+) + create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml +@@ -0,0 +1,255 @@ ++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6368-pinctrl.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Broadcom BCM6368 pin controller ++ ++maintainers: ++ - Álvaro Fernández Rojas <noltari@gmail.com> ++ - Jonas Gorski <jonas.gorski@gmail.com> ++ ++description: |+ ++ The pin controller node should be the child of a syscon node. ++ ++ Refer to the the bindings described in ++ Documentation/devicetree/bindings/mfd/syscon.yaml ++ ++properties: ++ compatible: ++ const: brcm,bcm6368-pinctrl ++ ++ gpio-controller: true ++ ++ '#gpio-cells': ++ description: ++ Specifies the pin number and flags, as defined in ++ include/dt-bindings/gpio/gpio.h ++ const: 2 ++ ++ interrupts-extended: ++ description: ++ One interrupt per each of the 6 GPIO ports supported by the controller, ++ sorted by port number ascending order. ++ minItems: 6 ++ maxItems: 6 ++ ++patternProperties: ++ '^.*$': ++ if: ++ type: object ++ then: ++ properties: ++ function: ++ $ref: "/schemas/types.yaml#/definitions/string" ++ enum: [ analog_afe_0, analog_afe_1, sys_irq, serial_led_data, ++ serial_led_clk, inet_led, ephy0_led, ephy1_led, ephy2_led, ++ ephy3_led, robosw_led_data, robosw_led_clk, robosw_led0, ++ robosw_led1, usb_device_led, pci_req1, pci_gnt1, pci_intb, ++ pci_req0, pci_gnt0, pcmcia_cd1, pcmcia_cd2, pcmcia_vs1, ++ pcmcia_vs2, ebi_cs2, ebi_cs3, spi_cs2, spi_cs3, spi_cs4, ++ spi_cs5, uart1 ] ++ ++ pins: ++ $ref: "/schemas/types.yaml#/definitions/string" ++ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, ++ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, ++ gpio16, gpio17, gpio18, gpio19, gpio20, gpio22, gpio23, ++ gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30, ++ gpio31, uart1_grp ] ++ ++required: ++ - compatible ++ - gpio-controller ++ - '#gpio-cells' ++ ++additionalProperties: false ++ ++examples: ++ - | ++ gpio@10000080 { ++ compatible = "syscon", "simple-mfd"; ++ reg = <0x10000080 0x80>; ++ ++ pinctrl: pinctrl { ++ compatible = "brcm,bcm6368-pinctrl"; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ interrupts-extended = <&ext_intc1 0 0>, ++ <&ext_intc1 1 0>, ++ <&ext_intc0 0 0>, ++ <&ext_intc0 1 0>, ++ <&ext_intc0 2 0>, ++ <&ext_intc0 3 0>; ++ interrupt-names = "gpio32", ++ "gpio33", ++ "gpio34", ++ "gpio35", ++ "gpio36", ++ "gpio37"; ++ ++ pinctrl_analog_afe_0: analog_afe_0 { ++ function = "analog_afe_0"; ++ pins = "gpio0"; ++ }; ++ ++ pinctrl_analog_afe_1: analog_afe_1 { ++ function = "analog_afe_1"; ++ pins = "gpio1"; ++ }; ++ ++ pinctrl_sys_irq: sys_irq { ++ function = "sys_irq"; ++ pins = "gpio2"; ++ }; ++ ++ pinctrl_serial_led: serial_led { ++ pinctrl_serial_led_data: serial_led_data { ++ function = "serial_led_data"; ++ pins = "gpio3"; ++ }; ++ ++ pinctrl_serial_led_clk: serial_led_clk { ++ function = "serial_led_clk"; ++ pins = "gpio4"; ++ }; ++ }; ++ ++ pinctrl_inet_led: inet_led { ++ function = "inet_led"; ++ pins = "gpio5"; ++ }; ++ ++ pinctrl_ephy0_led: ephy0_led { ++ function = "ephy0_led"; ++ pins = "gpio6"; ++ }; ++ ++ pinctrl_ephy1_led: ephy1_led { ++ function = "ephy1_led"; ++ pins = "gpio7"; ++ }; ++ ++ pinctrl_ephy2_led: ephy2_led { ++ function = "ephy2_led"; ++ pins = "gpio8"; ++ }; ++ ++ pinctrl_ephy3_led: ephy3_led { ++ function = "ephy3_led"; ++ pins = "gpio9"; ++ }; ++ ++ pinctrl_robosw_led_data: robosw_led_data { ++ function = "robosw_led_data"; ++ pins = "gpio10"; ++ }; ++ ++ pinctrl_robosw_led_clk: robosw_led_clk { ++ function = "robosw_led_clk"; ++ pins = "gpio11"; ++ }; ++ ++ pinctrl_robosw_led0: robosw_led0 { ++ function = "robosw_led0"; ++ pins = "gpio12"; ++ }; ++ ++ pinctrl_robosw_led1: robosw_led1 { ++ function = "robosw_led1"; ++ pins = "gpio13"; ++ }; ++ ++ pinctrl_usb_device_led: usb_device_led { ++ function = "usb_device_led"; ++ pins = "gpio14"; ++ }; ++ ++ pinctrl_pci: pci { ++ pinctrl_pci_req1: pci_req1 { ++ function = "pci_req1"; ++ pins = "gpio16"; ++ }; ++ ++ pinctrl_pci_gnt1: pci_gnt1 { ++ function = "pci_gnt1"; ++ pins = "gpio17"; ++ }; ++ ++ pinctrl_pci_intb: pci_intb { ++ function = "pci_intb"; ++ pins = "gpio18"; ++ }; ++ ++ pinctrl_pci_req0: pci_req0 { ++ function = "pci_req0"; ++ pins = "gpio19"; ++ }; ++ ++ pinctrl_pci_gnt0: pci_gnt0 { ++ function = "pci_gnt0"; ++ pins = "gpio20"; ++ }; ++ }; ++ ++ pinctrl_pcmcia: pcmcia { ++ pinctrl_pcmcia_cd1: pcmcia_cd1 { ++ function = "pcmcia_cd1"; ++ pins = "gpio22"; ++ }; ++ ++ pinctrl_pcmcia_cd2: pcmcia_cd2 { ++ function = "pcmcia_cd2"; ++ pins = "gpio23"; ++ }; ++ ++ pinctrl_pcmcia_vs1: pcmcia_vs1 { ++ function = "pcmcia_vs1"; ++ pins = "gpio24"; ++ }; ++ ++ pinctrl_pcmcia_vs2: pcmcia_vs2 { ++ function = "pcmcia_vs2"; ++ pins = "gpio25"; ++ }; ++ }; ++ ++ pinctrl_ebi_cs2: ebi_cs2 { ++ function = "ebi_cs2"; ++ pins = "gpio26"; ++ }; ++ ++ pinctrl_ebi_cs3: ebi_cs3 { ++ function = "ebi_cs3"; ++ pins = "gpio27"; ++ }; ++ ++ pinctrl_spi_cs2: spi_cs2 { ++ function = "spi_cs2"; ++ pins = "gpio28"; ++ }; ++ ++ pinctrl_spi_cs3: spi_cs3 { ++ function = "spi_cs3"; ++ pins = "gpio29"; ++ }; ++ ++ pinctrl_spi_cs4: spi_cs4 { ++ function = "spi_cs4"; ++ pins = "gpio30"; ++ }; ++ ++ pinctrl_spi_cs5: spi_cs5 { ++ function = "spi_cs5"; ++ pins = "gpio31"; ++ }; ++ ++ pinctrl_uart1: uart1 { ++ function = "uart1"; ++ group = "uart1_grp"; ++ }; ++ }; ++ }; diff --git a/target/linux/bmips/patches-5.10/407-Documentation-add-BCM6368-pincontroller-binding-docu.patch b/target/linux/bmips/patches-5.10/407-Documentation-add-BCM6368-pincontroller-binding-docu.patch deleted file mode 100644 index e0a698fc12..0000000000 --- a/target/linux/bmips/patches-5.10/407-Documentation-add-BCM6368-pincontroller-binding-docu.patch +++ /dev/null @@ -1,84 +0,0 @@ -From 30594cf9bfff176a9e4b14c50dcd8b9d0cc3edec Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jonas.gorski@gmail.com> -Date: Wed, 27 Jul 2016 11:36:51 +0200 -Subject: [PATCH 10/16] Documentation: add BCM6368 pincontroller binding - documentation - -Add binding documentation for the pincontrol core found in BCM6368 SoCs. - -Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> ---- - .../bindings/pinctrl/brcm,bcm6368-pinctrl.txt | 67 ++++++++++++++++++++++ - 1 file changed, 67 insertions(+) - create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.txt -@@ -0,0 +1,67 @@ -+* Broadcom BCM6368 pin controller -+ -+Required properties: -+- compatible: Must be "brcm,bcm6368-pinctrl". -+- reg: Register specifiers of dirout, dat, mode registers. -+- reg-names: Must be "dirout", "dat", "mode". -+- brcm,gpiobasemode: Phandle to the gpio basemode register. -+- gpio-controller: Identifies this node as a GPIO controller. -+- #gpio-cells: Must be <2>. -+ -+Example: -+ -+pinctrl: pin-controller@10000080 { -+ compatible = "brcm,bcm6368-pinctrl"; -+ reg = <0x10000080 0x08>, -+ <0x10000088 0x08>, -+ <0x10000098 0x04>; -+ reg-names = "dirout", "dat", "mode"; -+ brcm,gpiobasemode = <&gpiobasemode>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+}; -+ -+gpiobasemode: syscon@100000b8 { -+ compatible = "brcm,bcm6368-gpiobasemode", "syscon"; -+ reg = <0x100000b8 4>; -+ native-endian; -+}; -+ -+Available pins/groups and functions: -+ -+name pins functions -+----------------------------------------------------------- -+gpio0 0 analog_afe0 -+gpio1 1 analog_afe1 -+gpio2 2 sys_irq -+gpio3 3 serial_led_data -+gpio4 4 serial_led_clk -+gpio5 5 inet_led -+gpio6 6 ephy0_led -+gpio7 7 ephy1_led -+gpio8 8 ephy2_led -+gpio9 9 ephy3_led -+gpio10 10 robosw_led_data -+gpio11 11 robosw_led_clk -+gpio12 12 robosw_led0 -+gpio13 13 robosw_led1 -+gpio14 14 usb_device_led -+gpio15 15 - -+gpio16 16 pci_req1 -+gpio17 17 pci_gnt1 -+gpio18 18 pci_intb -+gpio19 19 pci_req0 -+gpio20 20 pci_gnt0 -+gpio21 21 - -+gpio22 22 pcmcia_cd1 -+gpio23 23 pcmcia_cd2 -+gpio24 24 pcmcia_vs1 -+gpio25 25 pcmcia_vs2 -+gpio26 26 ebi_cs2 -+gpio27 27 ebi_cs3 -+gpio28 28 spi_cs2 -+gpio29 29 spi_cs3 -+gpio30 30 spi_cs4 -+gpio31 31 spi_cs5 -+uart1_grp 30-33 uart1 diff --git a/target/linux/bmips/patches-5.10/408-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch b/target/linux/bmips/patches-5.10/407-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch index 80b007799f..5a5dac3487 100644 --- a/target/linux/bmips/patches-5.10/408-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch +++ b/target/linux/bmips/patches-5.10/407-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch @@ -1,77 +1,95 @@ -From 90be3cb4f1a45b8be4a4ec264cd66c2f8e893fcb Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jonas.gorski@gmail.com> +From a212dcb2f04ae42f35ec11122a2532b1bcf8a94f Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com> Date: Fri, 24 Jun 2016 22:18:25 +0200 -Subject: [PATCH 11/16] pinctrl: add a pincontrol driver for BCM6368 +Subject: [PATCH 08/12] pinctrl: add a pincontrol driver for BCM6368 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit Add a pincontrol driver for BCM6368. BCM6368 allows muxing the first 32 GPIOs onto alternative functions. Not all are documented. +Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> --- - drivers/pinctrl/bcm63xx/Kconfig | 15 + - drivers/pinctrl/bcm63xx/Makefile | 1 + - drivers/pinctrl/bcm63xx/pinctrl-bcm6368.c | 573 ++++++++++++++++++++++++++++++ - 3 files changed, 589 insertions(+) - create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6368.c + drivers/pinctrl/bcm/Kconfig | 11 + + drivers/pinctrl/bcm/Makefile | 1 + + drivers/pinctrl/bcm/pinctrl-bcm6368.c | 679 ++++++++++++++++++++++++++ + 3 files changed, 691 insertions(+) + create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6368.c ---- a/drivers/pinctrl/bcm63xx/Kconfig -+++ b/drivers/pinctrl/bcm63xx/Kconfig -@@ -23,3 +23,11 @@ config PINCTRL_BCM6362 - select PINCONF - select PINCTRL_BCM63XX - select GENERIC_PINCONF -+ +--- a/drivers/pinctrl/bcm/Kconfig ++++ b/drivers/pinctrl/bcm/Kconfig +@@ -62,6 +62,17 @@ config PINCTRL_BCM6362 + help + Say Y here to enable the Broadcom BCM6362 GPIO driver. + +config PINCTRL_BCM6368 -+ bool "BCM6368 pincontrol driver" ++ bool "Broadcom BCM6368 GPIO driver" ++ depends on OF_GPIO && (BMIPS_GENERIC || COMPILE_TEST) + select PINMUX + select PINCONF -+ select PINCTRL_BCM63XX + select GENERIC_PINCONF + select MFD_SYSCON ---- a/drivers/pinctrl/bcm63xx/Makefile -+++ b/drivers/pinctrl/bcm63xx/Makefile -@@ -2,3 +2,4 @@ obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl - obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o - obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o - obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o -+obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o ++ default BMIPS_GENERIC ++ help ++ Say Y here to enable the Broadcom BCM6368 GPIO driver. ++ + config PINCTRL_IPROC_GPIO + bool "Broadcom iProc GPIO (with PINCONF) driver" + depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST) +--- a/drivers/pinctrl/bcm/Makefile ++++ b/drivers/pinctrl/bcm/Makefile +@@ -6,6 +6,7 @@ obj-$(CONFIG_PINCTRL_BCM2835) += pinctr + obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o + obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o + obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o ++obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o + obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o + obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o + obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o --- /dev/null -+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6368.c -@@ -0,0 +1,570 @@ ++++ b/drivers/pinctrl/bcm/pinctrl-bcm6368.c +@@ -0,0 +1,679 @@ ++// SPDX-License-Identifier: GPL-2.0+ +/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. ++ * Driver for BCM6368 GPIO unit (pinctrl + GPIO) + * ++ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com> + * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com> + */ + +#include <linux/bitops.h> -+#include <linux/kernel.h> +#include <linux/gpio.h> ++#include <linux/kernel.h> +#include <linux/mfd/syscon.h> +#include <linux/of.h> -+#include <linux/of_address.h> +#include <linux/of_gpio.h> ++#include <linux/of_irq.h> ++#include <linux/platform_device.h> ++#include <linux/regmap.h> ++ ++#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinmux.h> -+#include <linux/pinctrl/machine.h> -+#include <linux/platform_device.h> -+#include <linux/regmap.h> -+#include <linux/slab.h> -+#include <linux/spinlock.h> + +#include "../core.h" +#include "../pinctrl-utils.h" + -+#include "pinctrl-bcm63xx.h" ++#define MODULE_NAME "bcm6368-pinctrl" ++#define BCM6368_NUM_GPIOS 38 + -+#define BCM6368_NGPIO 38 ++#define BANK_SIZE sizeof(uint32_t) ++#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE) + -+#define BCM6368_BASEMODE_MASK 0x7 -+#define BCM6368_BASEMODE_GPIO 0x0 -+#define BCM6368_BASEMODE_UART1 0x1 ++#define BCM6368_DIROUT_REG 0x04 ++#define BCM6368_DATA_REG 0x0c ++#define BCM6368_MODE_REG 0x18 ++#define BCM6368_BASEMODE_REG 0x38 ++#define BCM6368_BASEMODE_MASK 0x7 ++#define BCM6368_BASEMODE_GPIO 0x0 ++#define BCM6368_BASEMODE_UART1 0x1 + +struct bcm6368_pingroup { + const char *name; @@ -89,16 +107,14 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> +}; + +struct bcm6368_pinctrl { -+ struct pinctrl_dev *pctldev; -+ struct pinctrl_desc desc; -+ -+ void __iomem *mode; -+ struct regmap_field *overlay; -+ -+ /* register access lock */ -+ spinlock_t lock; ++ struct device *dev; ++ struct regmap *regs; ++ struct regmap_field *overlays; + -+ struct gpio_chip gpio[2]; ++ struct pinctrl_dev *pctl_dev; ++ struct gpio_chip gpio_chip; ++ struct pinctrl_desc pctl_desc; ++ struct pinctrl_gpio_range gpio_range; +}; + +#define BCM6368_BASEMODE_PIN(a, b) \ @@ -401,6 +417,108 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> + BCM6368_BASEMODE_FUN(uart1, UART1, 0x6), +}; + ++static inline unsigned int bcm6368_bank_pin(unsigned int pin) ++{ ++ return pin % PINS_PER_BANK; ++} ++ ++static inline unsigned int bcm6368_reg_off(unsigned int reg, unsigned int pin) ++{ ++ return reg - (pin / PINS_PER_BANK) * BANK_SIZE; ++} ++ ++static int bcm6368_gpio_direction_input(struct gpio_chip *chip, ++ unsigned int pin) ++{ ++ struct bcm6368_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int dirout = bcm6368_reg_off(BCM6368_DIROUT_REG, pin); ++ unsigned int bank_pin = bcm6368_bank_pin(pin); ++ int ret; ++ ++ /* ++ * Check with the pinctrl driver whether this pin is usable as ++ * an input GPIO ++ */ ++ ret = pinctrl_gpio_direction_input(chip->base + pin); ++ if (ret) ++ return ret; ++ ++ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), 0); ++ ++ return 0; ++} ++ ++static int bcm6368_gpio_direction_output(struct gpio_chip *chip, ++ unsigned int pin, int value) ++{ ++ struct bcm6368_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int data = bcm6368_reg_off(BCM6368_DATA_REG, pin); ++ unsigned int dirout = bcm6368_reg_off(BCM6368_DIROUT_REG, pin); ++ unsigned int bank_pin = bcm6368_bank_pin(pin); ++ unsigned int val = value ? BIT(bank_pin) : 0; ++ int ret; ++ ++ /* ++ * Check with the pinctrl driver whether this pin is usable as ++ * an output GPIO ++ */ ++ ret = pinctrl_gpio_direction_output(chip->base + pin); ++ if (ret) ++ return ret; ++ ++ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), BIT(bank_pin)); ++ regmap_update_bits(pc->regs, data, BIT(bank_pin), val); ++ ++ return 0; ++} ++ ++static int bcm6368_gpio_get(struct gpio_chip *chip, unsigned int pin) ++{ ++ struct bcm6368_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int data = bcm6368_reg_off(BCM6368_DATA_REG, pin); ++ unsigned int bank_pin = bcm6368_bank_pin(pin); ++ unsigned int val; ++ ++ regmap_read(pc->regs, data, &val); ++ ++ return !!(val & BIT(bank_pin)); ++} ++ ++static int bcm6368_gpio_get_direction(struct gpio_chip *chip, unsigned int pin) ++{ ++ struct bcm6368_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int dirout = bcm6368_reg_off(BCM6368_DIROUT_REG, pin); ++ unsigned int bank_pin = bcm6368_bank_pin(pin); ++ unsigned int val; ++ ++ regmap_read(pc->regs, dirout, &val); ++ ++ if (val & BIT(bank_pin)) ++ return GPIO_LINE_DIRECTION_OUT; ++ ++ return GPIO_LINE_DIRECTION_IN; ++} ++ ++static void bcm6368_gpio_set(struct gpio_chip *chip, unsigned int pin, ++ int value) ++{ ++ struct bcm6368_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int data = bcm6368_reg_off(BCM6368_DATA_REG, pin); ++ unsigned int bank_pin = bcm6368_bank_pin(pin); ++ unsigned int val = value ? BIT(bank_pin) : 0; ++ ++ regmap_update_bits(pc->regs, data, BIT(bank_pin), val); ++} ++ ++static int bcm6368_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) ++{ ++ char irq_name[7]; ++ ++ sprintf(irq_name, "gpio%d", gpio); ++ ++ return of_irq_get_byname(chip->of_node, irq_name); ++} ++ +static int bcm6368_pinctrl_get_group_count(struct pinctrl_dev *pctldev) +{ + return ARRAY_SIZE(bcm6368_groups); @@ -444,57 +562,44 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> + return 0; +} + -+static void bcm6368_rmw_mux(struct bcm6368_pinctrl *pctl, void __iomem *reg, -+ u32 mask, u32 val) -+{ -+ u32 tmp; -+ -+ tmp = __raw_readl(reg); -+ tmp &= ~mask; -+ tmp |= (val & mask); -+ __raw_writel(tmp, reg); -+} -+ +static int bcm6368_pinctrl_set_mux(struct pinctrl_dev *pctldev, + unsigned selector, unsigned group) +{ -+ struct bcm6368_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); -+ const struct bcm6368_pingroup *grp = &bcm6368_groups[group]; ++ struct bcm6368_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); ++ const struct bcm6368_pingroup *pg = &bcm6368_groups[group]; + const struct bcm6368_function *fun = &bcm6368_funcs[selector]; -+ unsigned long flags; + int i, pin; + -+ spin_lock_irqsave(&pctl->lock, flags); + if (fun->basemode) { -+ u32 mask = 0; ++ unsigned int mask = 0; + -+ for (i = 0; i < grp->num_pins; i++) { -+ pin = grp->pins[i]; -+ if (pin < 32) ++ for (i = 0; i < pg->num_pins; i++) { ++ pin = pg->pins[i]; ++ if (pin < PINS_PER_BANK) + mask |= BIT(pin); + } + -+ bcm6368_rmw_mux(pctl, pctl->mode, mask, 0); -+ regmap_field_write(pctl->overlay, fun->basemode); ++ regmap_update_bits(pc->regs, BCM6368_MODE_REG, mask, 0); ++ regmap_field_write(pc->overlays, fun->basemode); + } else { -+ pin = grp->pins[0]; ++ pin = pg->pins[0]; + + if (bcm6368_pins[pin].drv_data) -+ regmap_field_write(pctl->overlay, ++ regmap_field_write(pc->overlays, + BCM6368_BASEMODE_GPIO); + -+ bcm6368_rmw_mux(pctl, pctl->mode, BIT(pin), BIT(pin)); ++ regmap_update_bits(pc->regs, BCM6368_MODE_REG, BIT(pin), ++ BIT(pin)); + } -+ spin_unlock_irqrestore(&pctl->lock, flags); + -+ for (pin = 0; pin < grp->num_pins; pin++) { ++ for (pin = 0; pin < pg->num_pins; pin++) { + int hw_gpio = bcm6368_pins[pin].number; -+ struct gpio_chip *gc = &pctl->gpio[hw_gpio / 32]; ++ struct gpio_chip *gc = &pc->gpio_chip; + + if (fun->dir_out & BIT(pin)) -+ gc->direction_output(gc, hw_gpio % 32, 0); ++ gc->direction_output(gc, hw_gpio, 0); + else -+ gc->direction_input(gc, hw_gpio % 32); ++ gc->direction_input(gc, hw_gpio); + } + + return 0; @@ -504,92 +609,109 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> + struct pinctrl_gpio_range *range, + unsigned offset) +{ -+ struct bcm6368_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); -+ unsigned long flags; ++ struct bcm6368_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); + -+ if (offset >= 32 && !bcm6368_pins[offset].drv_data) ++ if (offset >= PINS_PER_BANK && !bcm6368_pins[offset].drv_data) + return 0; + -+ spin_lock_irqsave(&pctl->lock, flags); + /* disable all functions using this pin */ -+ if (offset < 32) -+ bcm6368_rmw_mux(pctl, pctl->mode, BIT(offset), 0); ++ if (offset < PINS_PER_BANK) ++ regmap_update_bits(pc->regs, BCM6368_MODE_REG, BIT(offset), 0); + + if (bcm6368_pins[offset].drv_data) -+ regmap_field_write(pctl->overlay, BCM6368_BASEMODE_GPIO); -+ -+ spin_unlock_irqrestore(&pctl->lock, flags); ++ regmap_field_write(pc->overlays, BCM6368_BASEMODE_GPIO); + + return 0; +} + +static struct pinctrl_ops bcm6368_pctl_ops = { -+ .get_groups_count = bcm6368_pinctrl_get_group_count, -+ .get_group_name = bcm6368_pinctrl_get_group_name, -+ .get_group_pins = bcm6368_pinctrl_get_group_pins, -+#ifdef CONFIG_OF -+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, -+ .dt_free_map = pinctrl_utils_free_map, -+#endif ++ .get_groups_count = bcm6368_pinctrl_get_group_count, ++ .get_group_name = bcm6368_pinctrl_get_group_name, ++ .get_group_pins = bcm6368_pinctrl_get_group_pins, ++ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, ++ .dt_free_map = pinctrl_utils_free_map, +}; + +static struct pinmux_ops bcm6368_pmx_ops = { -+ .get_functions_count = bcm6368_pinctrl_get_func_count, -+ .get_function_name = bcm6368_pinctrl_get_func_name, -+ .get_function_groups = bcm6368_pinctrl_get_groups, -+ .set_mux = bcm6368_pinctrl_set_mux, -+ .gpio_request_enable = bcm6368_gpio_request_enable, -+ .strict = true, ++ .get_functions_count = bcm6368_pinctrl_get_func_count, ++ .get_function_name = bcm6368_pinctrl_get_func_name, ++ .get_function_groups = bcm6368_pinctrl_get_groups, ++ .set_mux = bcm6368_pinctrl_set_mux, ++ .gpio_request_enable = bcm6368_gpio_request_enable, ++ .strict = true, +}; + +static int bcm6368_pinctrl_probe(struct platform_device *pdev) +{ -+ struct bcm6368_pinctrl *pctl; -+ struct resource *res; -+ void __iomem *mode; -+ struct regmap *basemode; -+ struct reg_field overlay = REG_FIELD(0, 0, 3); -+ -+ basemode = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, -+ "brcm,gpiobasemode"); -+ -+ if (IS_ERR(basemode)) -+ return PTR_ERR(basemode); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode"); -+ mode = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(mode)) -+ return PTR_ERR(mode); -+ -+ pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL); -+ if (!pctl) ++ struct reg_field overlays = REG_FIELD(BCM6368_BASEMODE_REG, 0, 15); ++ struct device *dev = &pdev->dev; ++ struct device_node *np = dev->of_node; ++ struct bcm6368_pinctrl *pc; ++ int err; ++ ++ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL); ++ if (!pc) + return -ENOMEM; + -+ pctl->overlay = devm_regmap_field_alloc(&pdev->dev, basemode, overlay); -+ if (IS_ERR(pctl->overlay)) -+ return PTR_ERR(pctl->overlay); ++ platform_set_drvdata(pdev, pc); ++ pc->dev = dev; + -+ spin_lock_init(&pctl->lock); ++ pc->regs = syscon_node_to_regmap(dev->parent->of_node); ++ if (IS_ERR(pc->regs)) ++ return PTR_ERR(pc->regs); + -+ pctl->mode = mode; ++ pc->overlays = devm_regmap_field_alloc(&pdev->dev, pc->regs, overlays); ++ if (IS_ERR(pc->overlays)) ++ return PTR_ERR(pc->overlays); + + /* disable all muxes by default */ -+ __raw_writel(0, pctl->mode); -+ -+ pctl->desc.name = dev_name(&pdev->dev); -+ pctl->desc.owner = THIS_MODULE; -+ pctl->desc.pctlops = &bcm6368_pctl_ops; -+ pctl->desc.pmxops = &bcm6368_pmx_ops; ++ regmap_field_write(pc->overlays, 0); ++ ++ pc->gpio_chip.label = MODULE_NAME; ++ pc->gpio_chip.owner = THIS_MODULE; ++ pc->gpio_chip.request = gpiochip_generic_request; ++ pc->gpio_chip.free = gpiochip_generic_free; ++ pc->gpio_chip.direction_input = bcm6368_gpio_direction_input; ++ pc->gpio_chip.direction_output = bcm6368_gpio_direction_output; ++ pc->gpio_chip.get_direction = bcm6368_gpio_get_direction; ++ pc->gpio_chip.get = bcm6368_gpio_get; ++ pc->gpio_chip.set = bcm6368_gpio_set; ++ pc->gpio_chip.set_config = gpiochip_generic_config; ++ pc->gpio_chip.base = -1; ++ pc->gpio_chip.ngpio = BCM6368_NUM_GPIOS; ++ pc->gpio_chip.can_sleep = false; ++ pc->gpio_chip.parent = dev; ++ pc->gpio_chip.of_node = np; ++ ++ if (of_get_property(np, "interrupt-names", NULL)) ++ pc->gpio_chip.to_irq = bcm6368_gpio_to_irq; ++ ++ err = gpiochip_add_data(&pc->gpio_chip, pc); ++ if (err) { ++ dev_err(dev, "could not add GPIO chip\n"); ++ return err; ++ } + -+ pctl->desc.npins = ARRAY_SIZE(bcm6368_pins); -+ pctl->desc.pins = bcm6368_pins; ++ pc->pctl_desc.name = MODULE_NAME, ++ pc->pctl_desc.pins = bcm6368_pins, ++ pc->pctl_desc.npins = ARRAY_SIZE(bcm6368_pins), ++ pc->pctl_desc.pctlops = &bcm6368_pctl_ops, ++ pc->pctl_desc.pmxops = &bcm6368_pmx_ops, ++ pc->pctl_desc.owner = THIS_MODULE, ++ ++ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc); ++ if (IS_ERR(pc->pctl_dev)) { ++ gpiochip_remove(&pc->gpio_chip); ++ return PTR_ERR(pc->pctl_dev); ++ } + -+ platform_set_drvdata(pdev, pctl); ++ pc->gpio_range.name = MODULE_NAME; ++ pc->gpio_range.npins = BCM6368_NUM_GPIOS; ++ pc->gpio_range.base = pc->gpio_chip.base; ++ pc->gpio_range.gc = &pc->gpio_chip; ++ pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range); + -+ pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl, -+ pctl->gpio, BCM6368_NGPIO); -+ if (IS_ERR(pctl->pctldev)) -+ return PTR_ERR(pctl->pctldev); ++ dev_info(dev, "registered\n"); + + return 0; +} @@ -602,7 +724,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> +static struct platform_driver bcm6368_pinctrl_driver = { + .probe = bcm6368_pinctrl_probe, + .driver = { -+ .name = "bcm6368-pinctrl", ++ .name = MODULE_NAME, + .of_match_table = bcm6368_pinctrl_match, + }, +}; diff --git a/target/linux/bmips/patches-5.10/408-Documentation-add-BCM63268-pincontroller-binding-doc.patch b/target/linux/bmips/patches-5.10/408-Documentation-add-BCM63268-pincontroller-binding-doc.patch new file mode 100644 index 0000000000..d51af84328 --- /dev/null +++ b/target/linux/bmips/patches-5.10/408-Documentation-add-BCM63268-pincontroller-binding-doc.patch @@ -0,0 +1,220 @@ +From 826266914f8397c996d2d4d821b315d614bfc325 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com> +Date: Wed, 27 Jul 2016 11:37:08 +0200 +Subject: [PATCH 09/12] Documentation: add BCM63268 pincontroller binding + documentation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add binding documentation for the pincontrol core found in the BCM63268 +family SoCs. + +Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> +Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> +--- + .../pinctrl/brcm,bcm63268-pinctrl.yaml | 198 ++++++++++++++++++ + 1 file changed, 198 insertions(+) + create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml +@@ -0,0 +1,198 @@ ++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/pinctrl/brcm,bcm63268-pinctrl.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Broadcom BCM63268 pin controller ++ ++maintainers: ++ - Álvaro Fernández Rojas <noltari@gmail.com> ++ - Jonas Gorski <jonas.gorski@gmail.com> ++ ++description: |+ ++ The pin controller node should be the child of a syscon node. ++ ++ Refer to the the bindings described in ++ Documentation/devicetree/bindings/mfd/syscon.yaml ++ ++properties: ++ compatible: ++ const: brcm,bcm63268-pinctrl ++ ++ gpio-controller: true ++ ++ '#gpio-cells': ++ description: ++ Specifies the pin number and flags, as defined in ++ include/dt-bindings/gpio/gpio.h ++ const: 2 ++ ++ interrupts-extended: ++ description: ++ One interrupt per each of the 4 GPIO ports supported by the controller, ++ sorted by port number ascending order. ++ minItems: 4 ++ maxItems: 4 ++ ++patternProperties: ++ '^.*$': ++ if: ++ type: object ++ then: ++ properties: ++ function: ++ $ref: "/schemas/types.yaml#/definitions/string" ++ enum: [ serial_led_clk, serial_led_data, hsspi_cs4, hsspi_cs5, ++ hsspi_cs6, hsspi_cs7, adsl_spi_miso, adsl_spi_mosi, ++ vreq_clk, pcie_clkreq_b, robosw_led_clk, robosw_led_data, ++ nand, gpio35_alt, dectpd, vdsl_phy_override_0, ++ vdsl_phy_override_1, vdsl_phy_override_2, ++ vdsl_phy_override_3, dsl_gpio8, dsl_gpio9 ] ++ ++ pins: ++ $ref: "/schemas/types.yaml#/definitions/string" ++ enum: [ gpio0, gpio1, gpio16, gpio17, gpio8, gpio9, gpio18, gpio19, ++ gpio22, gpio23, gpio30, gpio31, nand_grp, gpio35 ++ dectpd_grp, vdsl_phy_override_0_grp, ++ vdsl_phy_override_1_grp, vdsl_phy_override_2_grp, ++ vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ] ++ ++required: ++ - compatible ++ - gpio-controller ++ - '#gpio-cells' ++ ++additionalProperties: false ++ ++examples: ++ - | ++ gpio@100000c0 { ++ compatible = "syscon", "simple-mfd"; ++ reg = <0x100000c0 0x80>; ++ ++ pinctrl: pinctrl { ++ compatible = "brcm,bcm63268-pinctrl"; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ interrupts-extended = <&ext_intc 0 0>, ++ <&ext_intc 1 0>, ++ <&ext_intc 2 0>, ++ <&ext_intc 3 0>; ++ interrupt-names = "gpio32", ++ "gpio33", ++ "gpio34", ++ "gpio35"; ++ ++ pinctrl_serial_led: serial_led { ++ pinctrl_serial_led_clk: serial_led_clk { ++ function = "serial_led_clk"; ++ pins = "gpio0"; ++ }; ++ ++ pinctrl_serial_led_data: serial_led_data { ++ function = "serial_led_data"; ++ pins = "gpio1"; ++ }; ++ }; ++ ++ pinctrl_hsspi_cs4: hsspi_cs4 { ++ function = "hsspi_cs4"; ++ pins = "gpio16"; ++ }; ++ ++ pinctrl_hsspi_cs5: hsspi_cs5 { ++ function = "hsspi_cs5"; ++ pins = "gpio17"; ++ }; ++ ++ pinctrl_hsspi_cs6: hsspi_cs6 { ++ function = "hsspi_cs6"; ++ pins = "gpio8"; ++ }; ++ ++ pinctrl_hsspi_cs7: hsspi_cs7 { ++ function = "hsspi_cs7"; ++ pins = "gpio9"; ++ }; ++ ++ pinctrl_adsl_spi: adsl_spi { ++ pinctrl_adsl_spi_miso: adsl_spi_miso { ++ function = "adsl_spi_miso"; ++ pins = "gpio18"; ++ }; ++ ++ pinctrl_adsl_spi_mosi: adsl_spi_mosi { ++ function = "adsl_spi_mosi"; ++ pins = "gpio19"; ++ }; ++ }; ++ ++ pinctrl_vreq_clk: vreq_clk { ++ function = "vreq_clk"; ++ pins = "gpio22"; ++ }; ++ ++ pinctrl_pcie_clkreq_b: pcie_clkreq_b { ++ function = "pcie_clkreq_b"; ++ pins = "gpio23"; ++ }; ++ ++ pinctrl_robosw_led_clk: robosw_led_clk { ++ function = "robosw_led_clk"; ++ pins = "gpio30"; ++ }; ++ ++ pinctrl_robosw_led_data: robosw_led_data { ++ function = "robosw_led_data"; ++ pins = "gpio31"; ++ }; ++ ++ pinctrl_nand: nand { ++ function = "nand"; ++ group = "nand_grp"; ++ }; ++ ++ pinctrl_gpio35_alt: gpio35_alt { ++ function = "gpio35_alt"; ++ pin = "gpio35"; ++ }; ++ ++ pinctrl_dectpd: dectpd { ++ function = "dectpd"; ++ group = "dectpd_grp"; ++ }; ++ ++ pinctrl_vdsl_phy_override_0: vdsl_phy_override_0 { ++ function = "vdsl_phy_override_0"; ++ group = "vdsl_phy_override_0_grp"; ++ }; ++ ++ pinctrl_vdsl_phy_override_1: vdsl_phy_override_1 { ++ function = "vdsl_phy_override_1"; ++ group = "vdsl_phy_override_1_grp"; ++ }; ++ ++ pinctrl_vdsl_phy_override_2: vdsl_phy_override_2 { ++ function = "vdsl_phy_override_2"; ++ group = "vdsl_phy_override_2_grp"; ++ }; ++ ++ pinctrl_vdsl_phy_override_3: vdsl_phy_override_3 { ++ function = "vdsl_phy_override_3"; ++ group = "vdsl_phy_override_3_grp"; ++ }; ++ ++ pinctrl_dsl_gpio8: dsl_gpio8 { ++ function = "dsl_gpio8"; ++ group = "dsl_gpio8"; ++ }; ++ ++ pinctrl_dsl_gpio9: dsl_gpio9 { ++ function = "dsl_gpio9"; ++ group = "dsl_gpio9"; ++ }; ++ }; ++ }; diff --git a/target/linux/bmips/patches-5.10/409-Documentation-add-BCM63268-pincontroller-binding-doc.patch b/target/linux/bmips/patches-5.10/409-Documentation-add-BCM63268-pincontroller-binding-doc.patch deleted file mode 100644 index ffe842fd73..0000000000 --- a/target/linux/bmips/patches-5.10/409-Documentation-add-BCM63268-pincontroller-binding-doc.patch +++ /dev/null @@ -1,106 +0,0 @@ -From 28cc80e4ada5d73d5305fd268297825cd8d01936 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jonas.gorski@gmail.com> -Date: Wed, 27 Jul 2016 11:37:08 +0200 -Subject: [PATCH 12/16] Documentation: add BCM63268 pincontroller binding - documentation - -Add binding documentation for the pincontrol core found in the BCM63268 -family SoCs. - -Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> ---- - .../bindings/pinctrl/brcm,bcm63268-pinctrl.txt | 88 ++++++++++++++++++++++ - 1 file changed, 88 insertions(+) - create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.txt -@@ -0,0 +1,88 @@ -+* Broadcom BCM63268 pin controller -+ -+Required properties: -+- compatible: Must be "brcm,bcm6362-pinctrl". -+- reg: Register specifiers of dirout, dat, led, mode, ctrl, basemode registers. -+- reg-names: Must be "dirout", "dat", "led", "mode", "ctrl", "basemode". -+- gpio-controller: Identifies this node as a GPIO controller. -+- #gpio-cells: Must be <2>. -+ -+Example: -+ -+pinctrl: pin-controller@100000c0 { -+ compatible = "brcm,bcm63268-pinctrl"; -+ reg = <0x100000c0 0x8>, -+ <0x100000c8 0x8>, -+ <0x100000d0 0x4>, -+ <0x100000d8 0x4>, -+ <0x100000dc 0x4>, -+ <0x100000f8 0x4>; -+ reg-names = "dirout", "dat", "led", "mode", -+ "ctrl", "basemode"; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+}; -+ -+Available pins/groups and functions: -+ -+name pins functions -+----------------------------------------------------------- -+gpio0 0 led, serial_led_clk -+gpio1 1 led, serial_led_data -+gpio2 2 led, -+gpio3 3 led, -+gpio4 4 led, -+gpio5 5 led, -+gpio6 6 led, -+gpio7 7 led, -+gpio8 8 led, hsspi_cs6 -+gpio9 9 led, hsspi_cs7 -+gpio10 10 led, uart1_scts -+gpio11 11 led, uart1_srts -+gpio12 12 led, uart1_sdin -+gpio13 13 led, uart1_sdout -+gpio14 14 led, ntr_pulse_in -+gpio15 15 led, dsl_ntr_pulse_out -+gpio16 16 led, hsspi_cs4 -+gpio17 17 led, hsspi_cs5 -+gpio18 18 led, adsl_spi_miso -+gpio19 19 led, adsl_spi_mosi -+gpio20 20 led, -+gpio21 21 led, -+gpio22 22 led, vreg_clk -+gpio23 23 led, pcie_clkreq_b -+gpio24 24 uart1_scts -+gpio25 25 uart1_srts -+gpio26 26 uart1_sdin -+gpio27 27 uart1_sdout -+gpio28 28 ntr_pulse_in -+gpio29 29 dsl_ntr_pulse_out -+gpio30 30 switch_led_clk -+gpio31 31 switch_led_data -+gpio32 32 wifi -+gpio33 33 wifi -+gpio34 34 wifi -+gpio35 35 wifi -+gpio36 36 wifi -+gpio37 37 wifi -+gpio38 38 wifi -+gpio39 39 wifi -+gpio40 40 wifi -+gpio41 41 wifi -+gpio42 42 wifi -+gpio43 43 wifi -+gpio44 44 wifi -+gpio45 45 wifi -+gpio46 46 wifi -+gpio47 47 wifi -+gpio48 48 wifi -+gpio49 49 wifi -+gpio50 50 wifi -+gpio51 51 wifi -+nand_grp 2-7,24-31 nand -+dect_pd_grp 8-9 dect_pd -+vdsl_phy0_grp 10-11 vdsl_phy0 -+vdsl_phy1_grp 12-13 vdsl_phy1 -+vdsl_phy2_grp 24-25 vdsl_phy2 -+vdsl_phy3_grp 26-27 vdsl_phy3 diff --git a/target/linux/bmips/patches-5.10/410-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch b/target/linux/bmips/patches-5.10/409-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch index 1607f23061..8acc5dbfbb 100644 --- a/target/linux/bmips/patches-5.10/410-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch +++ b/target/linux/bmips/patches-5.10/409-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch @@ -1,79 +1,103 @@ -From 8665d3ea63649cc155286c75f83f694a930580e5 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jonas.gorski@gmail.com> +From 8ec959299a6e4bbdc65d62180aa952ae04cdcf07 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com> Date: Fri, 24 Jun 2016 22:19:12 +0200 -Subject: [PATCH 13/16] pinctrl: add a pincontrol driver for BCM63268 +Subject: [PATCH 10/12] pinctrl: add a pincontrol driver for BCM63268 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit Add a pincontrol driver for BCM63268. BCM63268 allows muxing GPIOs to different functions. Depending on the mux, these are either single pin configurations or whole pin groups. +Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> --- - drivers/pinctrl/bcm63xx/Makefile | 1 + - drivers/pinctrl/bcm63xx/pinctrl-bcm63268.c | 710 +++++++++++++++++++++++++++++ - 2 files changed, 711 insertions(+) - create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm63268.c + drivers/pinctrl/bcm/Kconfig | 11 + + drivers/pinctrl/bcm/Makefile | 1 + + drivers/pinctrl/bcm/pinctrl-bcm63268.c | 821 +++++++++++++++++++++++++ + 3 files changed, 833 insertions(+) + create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm63268.c ---- a/drivers/pinctrl/bcm63xx/Kconfig -+++ b/drivers/pinctrl/bcm63xx/Kconfig -@@ -31,3 +31,10 @@ config PINCTRL_BCM6368 - select PINCTRL_BCM63XX - select GENERIC_PINCONF - select MFD_SYSCON -+ +--- a/drivers/pinctrl/bcm/Kconfig ++++ b/drivers/pinctrl/bcm/Kconfig +@@ -73,6 +73,17 @@ config PINCTRL_BCM6368 + help + Say Y here to enable the Broadcom BCM6368 GPIO driver. + +config PINCTRL_BCM63268 -+ bool "BCM63268 pincontrol driver" ++ bool "Broadcom BCM63268 GPIO driver" ++ depends on OF_GPIO && (BMIPS_GENERIC || COMPILE_TEST) + select PINMUX + select PINCONF -+ select PINCTRL_BCM63XX + select GENERIC_PINCONF ---- a/drivers/pinctrl/bcm63xx/Makefile -+++ b/drivers/pinctrl/bcm63xx/Makefile -@@ -3,3 +3,4 @@ obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl - obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o - obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o - obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o -+obj-$(CONFIG_PINCTRL_BCM63268) += pinctrl-bcm63268.o ++ select MFD_SYSCON ++ default BMIPS_GENERIC ++ help ++ Say Y here to enable the Broadcom BCM63268 GPIO driver. ++ + config PINCTRL_IPROC_GPIO + bool "Broadcom iProc GPIO (with PINCONF) driver" + depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST) +--- a/drivers/pinctrl/bcm/Makefile ++++ b/drivers/pinctrl/bcm/Makefile +@@ -7,6 +7,7 @@ obj-$(CONFIG_PINCTRL_BCM6328) += pinctr + obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o + obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o + obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o ++obj-$(CONFIG_PINCTRL_BCM63268) += pinctrl-bcm63268.o + obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o + obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o + obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o --- /dev/null -+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm63268.c -@@ -0,0 +1,710 @@ ++++ b/drivers/pinctrl/bcm/pinctrl-bcm63268.c +@@ -0,0 +1,821 @@ ++// SPDX-License-Identifier: GPL-2.0+ +/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. ++ * Driver for BCM63268 GPIO unit (pinctrl + GPIO) + * ++ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com> + * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com> + */ + -+#include <linux/kernel.h> -+#include <linux/spinlock.h> +#include <linux/bitops.h> +#include <linux/gpio.h> ++#include <linux/kernel.h> ++#include <linux/mfd/syscon.h> +#include <linux/of.h> +#include <linux/of_gpio.h> -+#include <linux/slab.h> ++#include <linux/of_irq.h> +#include <linux/platform_device.h> ++#include <linux/regmap.h> + ++#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinmux.h> -+#include <linux/pinctrl/machine.h> + +#include "../core.h" +#include "../pinctrl-utils.h" + -+#include "pinctrl-bcm63xx.h" -+ -+#define BCM63268_NGPIO 52 -+ -+/* GPIO_BASEMODE register */ -+#define BASEMODE_NAND BIT(2) /* GPIOs 2-7, 24-31 */ -+#define BASEMODE_GPIO35 BIT(4) /* GPIO 35 */ -+#define BASEMODE_DECTPD BIT(5) /* GPIOs 8/9 */ -+#define BASEMODE_VDSL_PHY_0 BIT(6) /* GPIOs 10/11 */ -+#define BASEMODE_VDSL_PHY_1 BIT(7) /* GPIOs 12/13 */ -+#define BASEMODE_VDSL_PHY_2 BIT(8) /* GPIOs 24/25 */ -+#define BASEMODE_VDSL_PHY_3 BIT(9) /* GPIOs 26/27 */ ++#define MODULE_NAME "bcm63268-pinctrl" ++#define BCM63268_NUM_GPIOS 52 ++#define BCM63268_NUM_LEDS 24 ++ ++#define BANK_SIZE sizeof(uint32_t) ++#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE) ++ ++#define BCM63268_DIROUT_REG 0x04 ++#define BCM63268_DATA_REG 0x0c ++#define BCM63268_LED_REG 0x10 ++#define BCM63268_MODE_REG 0x18 ++#define BCM63268_CTRL_REG 0x1c ++#define BCM63268_BASEMODE_REG 0x38 ++#define BCM63268_BASEMODE_NAND BIT(2) /* GPIOs 2-7, 24-31 */ ++#define BCM63268_BASEMODE_GPIO35 BIT(4) /* GPIO 35 */ ++#define BCM63268_BASEMODE_DECTPD BIT(5) /* GPIOs 8/9 */ ++#define BCM63268_BASEMODE_VDSL_PHY_0 BIT(6) /* GPIOs 10/11 */ ++#define BCM63268_BASEMODE_VDSL_PHY_1 BIT(7) /* GPIOs 12/13 */ ++#define BCM63268_BASEMODE_VDSL_PHY_2 BIT(8) /* GPIOs 24/25 */ ++#define BCM63268_BASEMODE_VDSL_PHY_3 BIT(9) /* GPIOs 26/27 */ + +enum bcm63268_pinctrl_reg { + BCM63268_LEDCTRL, @@ -94,22 +118,17 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> + const unsigned num_groups; + + enum bcm63268_pinctrl_reg reg; -+ u32 mask; ++ uint32_t mask; +}; + +struct bcm63268_pinctrl { -+ struct pinctrl_dev *pctldev; -+ struct pinctrl_desc desc; -+ -+ void __iomem *led; -+ void __iomem *mode; -+ void __iomem *ctrl; -+ void __iomem *basemode; ++ struct device *dev; ++ struct regmap *regs; + -+ /* register access lock */ -+ spinlock_t lock; -+ -+ struct gpio_chip gpio[2]; ++ struct pinctrl_dev *pctl_dev; ++ struct gpio_chip gpio_chip; ++ struct pinctrl_desc pctl_desc; ++ struct pinctrl_gpio_range gpio_range; +}; + +#define BCM63268_PIN(a, b, basemode) \ @@ -122,18 +141,18 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> +static const struct pinctrl_pin_desc bcm63268_pins[] = { + PINCTRL_PIN(0, "gpio0"), + PINCTRL_PIN(1, "gpio1"), -+ BCM63268_PIN(2, "gpio2", BASEMODE_NAND), -+ BCM63268_PIN(3, "gpio3", BASEMODE_NAND), -+ BCM63268_PIN(4, "gpio4", BASEMODE_NAND), -+ BCM63268_PIN(5, "gpio5", BASEMODE_NAND), -+ BCM63268_PIN(6, "gpio6", BASEMODE_NAND), -+ BCM63268_PIN(7, "gpio7", BASEMODE_NAND), -+ BCM63268_PIN(8, "gpio8", BASEMODE_DECTPD), -+ BCM63268_PIN(9, "gpio9", BASEMODE_DECTPD), -+ BCM63268_PIN(10, "gpio10", BASEMODE_VDSL_PHY_0), -+ BCM63268_PIN(11, "gpio11", BASEMODE_VDSL_PHY_0), -+ BCM63268_PIN(12, "gpio12", BASEMODE_VDSL_PHY_1), -+ BCM63268_PIN(13, "gpio13", BASEMODE_VDSL_PHY_1), ++ BCM63268_PIN(2, "gpio2", BCM63268_BASEMODE_NAND), ++ BCM63268_PIN(3, "gpio3", BCM63268_BASEMODE_NAND), ++ BCM63268_PIN(4, "gpio4", BCM63268_BASEMODE_NAND), ++ BCM63268_PIN(5, "gpio5", BCM63268_BASEMODE_NAND), ++ BCM63268_PIN(6, "gpio6", BCM63268_BASEMODE_NAND), ++ BCM63268_PIN(7, "gpio7", BCM63268_BASEMODE_NAND), ++ BCM63268_PIN(8, "gpio8", BCM63268_BASEMODE_DECTPD), ++ BCM63268_PIN(9, "gpio9", BCM63268_BASEMODE_DECTPD), ++ BCM63268_PIN(10, "gpio10", BCM63268_BASEMODE_VDSL_PHY_0), ++ BCM63268_PIN(11, "gpio11", BCM63268_BASEMODE_VDSL_PHY_0), ++ BCM63268_PIN(12, "gpio12", BCM63268_BASEMODE_VDSL_PHY_1), ++ BCM63268_PIN(13, "gpio13", BCM63268_BASEMODE_VDSL_PHY_1), + PINCTRL_PIN(14, "gpio14"), + PINCTRL_PIN(15, "gpio15"), + PINCTRL_PIN(16, "gpio16"), @@ -144,14 +163,18 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> + PINCTRL_PIN(21, "gpio21"), + PINCTRL_PIN(22, "gpio22"), + PINCTRL_PIN(23, "gpio23"), -+ BCM63268_PIN(24, "gpio24", BASEMODE_NAND | BASEMODE_VDSL_PHY_2), -+ BCM63268_PIN(25, "gpio25", BASEMODE_NAND | BASEMODE_VDSL_PHY_2), -+ BCM63268_PIN(26, "gpio26", BASEMODE_NAND | BASEMODE_VDSL_PHY_3), -+ BCM63268_PIN(27, "gpio27", BASEMODE_NAND | BASEMODE_VDSL_PHY_3), -+ BCM63268_PIN(28, "gpio28", BASEMODE_NAND), -+ BCM63268_PIN(29, "gpio29", BASEMODE_NAND), -+ BCM63268_PIN(30, "gpio30", BASEMODE_NAND), -+ BCM63268_PIN(31, "gpio31", BASEMODE_NAND), ++ BCM63268_PIN(24, "gpio24", ++ BCM63268_BASEMODE_NAND | BCM63268_BASEMODE_VDSL_PHY_2), ++ BCM63268_PIN(25, "gpio25", ++ BCM63268_BASEMODE_NAND | BCM63268_BASEMODE_VDSL_PHY_2), ++ BCM63268_PIN(26, "gpio26", ++ BCM63268_BASEMODE_NAND | BCM63268_BASEMODE_VDSL_PHY_3), ++ BCM63268_PIN(27, "gpio27", ++ BCM63268_BASEMODE_NAND | BCM63268_BASEMODE_VDSL_PHY_3), ++ BCM63268_PIN(28, "gpio28", BCM63268_BASEMODE_NAND), ++ BCM63268_PIN(29, "gpio29", BCM63268_BASEMODE_NAND), ++ BCM63268_PIN(30, "gpio30", BCM63268_BASEMODE_NAND), ++ BCM63268_PIN(31, "gpio31", BCM63268_BASEMODE_NAND), + PINCTRL_PIN(32, "gpio32"), + PINCTRL_PIN(33, "gpio33"), + PINCTRL_PIN(34, "gpio34"), @@ -514,13 +537,119 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> + BCM63268_MODE_FUN(switch_led_clk), + BCM63268_MODE_FUN(switch_led_data), + BCM63268_CTRL_FUN(wifi), -+ BCM63268_BASEMODE_FUN(nand, BASEMODE_NAND), -+ BCM63268_BASEMODE_FUN(dectpd, BASEMODE_DECTPD), -+ BCM63268_BASEMODE_FUN(vdsl_phy_override_0, BASEMODE_VDSL_PHY_0), -+ BCM63268_BASEMODE_FUN(vdsl_phy_override_1, BASEMODE_VDSL_PHY_1), -+ BCM63268_BASEMODE_FUN(vdsl_phy_override_2, BASEMODE_VDSL_PHY_2), -+ BCM63268_BASEMODE_FUN(vdsl_phy_override_3, BASEMODE_VDSL_PHY_3), -+}; ++ BCM63268_BASEMODE_FUN(nand, BCM63268_BASEMODE_NAND), ++ BCM63268_BASEMODE_FUN(dectpd, BCM63268_BASEMODE_DECTPD), ++ BCM63268_BASEMODE_FUN(vdsl_phy_override_0, ++ BCM63268_BASEMODE_VDSL_PHY_0), ++ BCM63268_BASEMODE_FUN(vdsl_phy_override_1, ++ BCM63268_BASEMODE_VDSL_PHY_1), ++ BCM63268_BASEMODE_FUN(vdsl_phy_override_2, ++ BCM63268_BASEMODE_VDSL_PHY_2), ++ BCM63268_BASEMODE_FUN(vdsl_phy_override_3, ++ BCM63268_BASEMODE_VDSL_PHY_3), ++}; ++ ++static inline unsigned int bcm63268_bank_pin(unsigned int pin) ++{ ++ return pin % PINS_PER_BANK; ++} ++ ++static inline unsigned int bcm63268_reg_off(unsigned int reg, unsigned int pin) ++{ ++ return reg - (pin / PINS_PER_BANK) * BANK_SIZE; ++} ++ ++static int bcm63268_gpio_direction_input(struct gpio_chip *chip, ++ unsigned int pin) ++{ ++ struct bcm63268_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int dirout = bcm63268_reg_off(BCM63268_DIROUT_REG, pin); ++ unsigned int bank_pin = bcm63268_bank_pin(pin); ++ int ret; ++ ++ /* ++ * Check with the pinctrl driver whether this pin is usable as ++ * an input GPIO ++ */ ++ ret = pinctrl_gpio_direction_input(chip->base + pin); ++ if (ret) ++ return ret; ++ ++ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), 0); ++ ++ return 0; ++} ++ ++static int bcm63268_gpio_direction_output(struct gpio_chip *chip, ++ unsigned int pin, int value) ++{ ++ struct bcm63268_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int data = bcm63268_reg_off(BCM63268_DATA_REG, pin); ++ unsigned int dirout = bcm63268_reg_off(BCM63268_DIROUT_REG, pin); ++ unsigned int bank_pin = bcm63268_bank_pin(pin); ++ unsigned int val = value ? BIT(bank_pin) : 0; ++ int ret; ++ ++ /* ++ * Check with the pinctrl driver whether this pin is usable as ++ * an output GPIO ++ */ ++ ret = pinctrl_gpio_direction_output(chip->base + pin); ++ if (ret) ++ return ret; ++ ++ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), BIT(bank_pin)); ++ regmap_update_bits(pc->regs, data, BIT(bank_pin), val); ++ ++ return 0; ++} ++ ++static int bcm63268_gpio_get(struct gpio_chip *chip, unsigned int pin) ++{ ++ struct bcm63268_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int data = bcm63268_reg_off(BCM63268_DATA_REG, pin); ++ unsigned int bank_pin = bcm63268_bank_pin(pin); ++ unsigned int val; ++ ++ regmap_read(pc->regs, data, &val); ++ ++ return !!(val & BIT(bank_pin)); ++} ++ ++static int bcm63268_gpio_get_direction(struct gpio_chip *chip, unsigned int pin) ++{ ++ struct bcm63268_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int dirout = bcm63268_reg_off(BCM63268_DIROUT_REG, pin); ++ unsigned int bank_pin = bcm63268_bank_pin(pin); ++ unsigned int val; ++ ++ regmap_read(pc->regs, dirout, &val); ++ ++ if (val & BIT(bank_pin)) ++ return GPIO_LINE_DIRECTION_OUT; ++ ++ return GPIO_LINE_DIRECTION_IN; ++} ++ ++static void bcm63268_gpio_set(struct gpio_chip *chip, unsigned int pin, ++ int value) ++{ ++ struct bcm63268_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int data = bcm63268_reg_off(BCM63268_DATA_REG, pin); ++ unsigned int bank_pin = bcm63268_bank_pin(pin); ++ unsigned int val = value ? BIT(bank_pin) : 0; ++ ++ regmap_update_bits(pc->regs, data, BIT(bank_pin), val); ++} ++ ++static int bcm63268_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) ++{ ++ char irq_name[7]; ++ ++ sprintf(irq_name, "gpio%d", gpio); ++ ++ return of_irq_get_byname(chip->of_node, irq_name); ++} + +static int bcm63268_pinctrl_get_group_count(struct pinctrl_dev *pctldev) +{ @@ -566,74 +695,61 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> + return 0; +} + -+static void bcm63268_rmw_mux(struct bcm63268_pinctrl *pctl, void __iomem *reg, -+ u32 mask, u32 val) -+{ -+ unsigned long flags; -+ u32 tmp; -+ -+ spin_lock_irqsave(&pctl->lock, flags); -+ tmp = __raw_readl(reg); -+ tmp &= ~mask; -+ tmp |= val; -+ __raw_writel(tmp, reg); -+ -+ spin_unlock_irqrestore(&pctl->lock, flags); -+} -+ -+static void bcm63268_set_gpio(struct bcm63268_pinctrl *pctl, unsigned pin) ++static void bcm63268_set_gpio(struct bcm63268_pinctrl *pc, unsigned pin) +{ + const struct pinctrl_pin_desc *desc = &bcm63268_pins[pin]; -+ u32 basemode = (unsigned long)desc->drv_data; -+ u32 mask = BIT(pin % 32); ++ unsigned int basemode = (unsigned long) desc->drv_data; ++ unsigned int mask = BIT(bcm63268_bank_pin(pin)); + + if (basemode) -+ bcm63268_rmw_mux(pctl, pctl->basemode, basemode, 0); ++ regmap_update_bits(pc->regs, BCM63268_BASEMODE_REG, basemode, ++ 0); + -+ if (pin < 32) { ++ if (pin < PINS_PER_BANK) { + /* base mode: 0 => gpio, 1 => mux function */ -+ bcm63268_rmw_mux(pctl, pctl->mode, mask, 0); ++ regmap_update_bits(pc->regs, BCM63268_MODE_REG, mask, 0); + + /* pins 0-23 might be muxed to led */ -+ if (pin < 24) -+ bcm63268_rmw_mux(pctl, pctl->led, mask, 0); -+ } else if (pin < 52) { ++ if (pin < BCM63268_NUM_LEDS) ++ regmap_update_bits(pc->regs, BCM63268_LED_REG, mask, ++ 0); ++ } else if (pin < BCM63268_NUM_GPIOS) { + /* ctrl reg: 0 => wifi function, 1 => gpio */ -+ bcm63268_rmw_mux(pctl, pctl->ctrl, mask, mask); ++ regmap_update_bits(pc->regs, BCM63268_CTRL_REG, mask, mask); + } +} + +static int bcm63268_pinctrl_set_mux(struct pinctrl_dev *pctldev, + unsigned selector, unsigned group) +{ -+ struct bcm63268_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); -+ const struct bcm63268_pingroup *grp = &bcm63268_groups[group]; ++ struct bcm63268_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); ++ const struct bcm63268_pingroup *pg = &bcm63268_groups[group]; + const struct bcm63268_function *f = &bcm63268_funcs[selector]; + unsigned i; -+ void __iomem *reg; -+ u32 val, mask; ++ unsigned int reg; ++ unsigned int val, mask; + -+ for (i = 0; i < grp->num_pins; i++) -+ bcm63268_set_gpio(pctl, grp->pins[i]); ++ for (i = 0; i < pg->num_pins; i++) ++ bcm63268_set_gpio(pc, pg->pins[i]); + + switch (f->reg) { + case BCM63268_LEDCTRL: -+ reg = pctl->led; -+ mask = BIT(grp->pins[0]); -+ val = BIT(grp->pins[0]); ++ reg = BCM63268_LED_REG; ++ mask = BIT(pg->pins[0]); ++ val = BIT(pg->pins[0]); + break; + case BCM63268_MODE: -+ reg = pctl->mode; -+ mask = BIT(grp->pins[0]); -+ val = BIT(grp->pins[0]); ++ reg = BCM63268_MODE_REG; ++ mask = BIT(pg->pins[0]); ++ val = BIT(pg->pins[0]); + break; + case BCM63268_CTRL: -+ reg = pctl->ctrl; -+ mask = BIT(grp->pins[0]); ++ reg = BCM63268_CTRL_REG; ++ mask = BIT(pg->pins[0]); + val = 0; + break; + case BCM63268_BASEMODE: -+ reg = pctl->basemode; ++ reg = BCM63268_BASEMODE_REG; + mask = f->mask; + val = f->mask; + break; @@ -642,7 +758,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> + return -EINVAL; + } + -+ bcm63268_rmw_mux(pctl, reg, mask, val); ++ regmap_update_bits(pc->regs, reg, mask, val); + + return 0; +} @@ -651,84 +767,94 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> + struct pinctrl_gpio_range *range, + unsigned offset) +{ -+ struct bcm63268_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); ++ struct bcm63268_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); + + /* disable all functions using this pin */ -+ bcm63268_set_gpio(pctl, offset); ++ bcm63268_set_gpio(pc, offset); + + return 0; +} + +static struct pinctrl_ops bcm63268_pctl_ops = { -+ .get_groups_count = bcm63268_pinctrl_get_group_count, -+ .get_group_name = bcm63268_pinctrl_get_group_name, -+ .get_group_pins = bcm63268_pinctrl_get_group_pins, -+#ifdef CONFIG_OF -+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, -+ .dt_free_map = pinctrl_utils_free_map, -+#endif ++ .get_groups_count = bcm63268_pinctrl_get_group_count, ++ .get_group_name = bcm63268_pinctrl_get_group_name, ++ .get_group_pins = bcm63268_pinctrl_get_group_pins, ++ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, ++ .dt_free_map = pinctrl_utils_free_map, +}; + +static struct pinmux_ops bcm63268_pmx_ops = { -+ .get_functions_count = bcm63268_pinctrl_get_func_count, -+ .get_function_name = bcm63268_pinctrl_get_func_name, -+ .get_function_groups = bcm63268_pinctrl_get_groups, -+ .set_mux = bcm63268_pinctrl_set_mux, -+ .gpio_request_enable = bcm63268_gpio_request_enable, -+ .strict = true, ++ .get_functions_count = bcm63268_pinctrl_get_func_count, ++ .get_function_name = bcm63268_pinctrl_get_func_name, ++ .get_function_groups = bcm63268_pinctrl_get_groups, ++ .set_mux = bcm63268_pinctrl_set_mux, ++ .gpio_request_enable = bcm63268_gpio_request_enable, ++ .strict = true, +}; + +static int bcm63268_pinctrl_probe(struct platform_device *pdev) +{ -+ struct bcm63268_pinctrl *pctl; -+ struct resource *res; -+ void __iomem *led, *mode, *ctrl, *basemode; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "led"); -+ led = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(led)) -+ return PTR_ERR(led); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode"); -+ mode = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(mode)) -+ return PTR_ERR(mode); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl"); -+ ctrl = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(ctrl)) -+ return PTR_ERR(ctrl); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "basemode"); -+ basemode = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(basemode)) -+ return PTR_ERR(basemode); -+ -+ pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL); -+ if (!pctl) -+ return -ENOMEM; -+ -+ spin_lock_init(&pctl->lock); ++ struct device *dev = &pdev->dev; ++ struct device_node *np = dev->of_node; ++ struct bcm63268_pinctrl *pc; ++ int err; + -+ pctl->led = led; -+ pctl->mode = mode; -+ pctl->ctrl = ctrl; -+ pctl->basemode = basemode; ++ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL); ++ if (!pc) ++ return -ENOMEM; + -+ pctl->desc.name = dev_name(&pdev->dev); -+ pctl->desc.owner = THIS_MODULE; -+ pctl->desc.pctlops = &bcm63268_pctl_ops; -+ pctl->desc.pmxops = &bcm63268_pmx_ops; ++ platform_set_drvdata(pdev, pc); ++ pc->dev = dev; ++ ++ pc->regs = syscon_node_to_regmap(dev->parent->of_node); ++ if (IS_ERR(pc->regs)) ++ return PTR_ERR(pc->regs); ++ ++ pc->gpio_chip.label = MODULE_NAME; ++ pc->gpio_chip.owner = THIS_MODULE; ++ pc->gpio_chip.request = gpiochip_generic_request; ++ pc->gpio_chip.free = gpiochip_generic_free; ++ pc->gpio_chip.direction_input = bcm63268_gpio_direction_input; ++ pc->gpio_chip.direction_output = bcm63268_gpio_direction_output; ++ pc->gpio_chip.get_direction = bcm63268_gpio_get_direction; ++ pc->gpio_chip.get = bcm63268_gpio_get; ++ pc->gpio_chip.set = bcm63268_gpio_set; ++ pc->gpio_chip.set_config = gpiochip_generic_config; ++ pc->gpio_chip.base = -1; ++ pc->gpio_chip.ngpio = BCM63268_NUM_GPIOS; ++ pc->gpio_chip.can_sleep = false; ++ pc->gpio_chip.parent = dev; ++ pc->gpio_chip.of_node = np; ++ ++ if (of_get_property(np, "interrupt-names", NULL)) ++ pc->gpio_chip.to_irq = bcm63268_gpio_to_irq; ++ ++ err = gpiochip_add_data(&pc->gpio_chip, pc); ++ if (err) { ++ dev_err(dev, "could not add GPIO chip\n"); ++ return err; ++ } + -+ pctl->desc.npins = ARRAY_SIZE(bcm63268_pins); -+ pctl->desc.pins = bcm63268_pins; ++ pc->pctl_desc.name = MODULE_NAME, ++ pc->pctl_desc.pins = bcm63268_pins, ++ pc->pctl_desc.npins = ARRAY_SIZE(bcm63268_pins), ++ pc->pctl_desc.pctlops = &bcm63268_pctl_ops, ++ pc->pctl_desc.pmxops = &bcm63268_pmx_ops, ++ pc->pctl_desc.owner = THIS_MODULE, ++ ++ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc); ++ if (IS_ERR(pc->pctl_dev)) { ++ gpiochip_remove(&pc->gpio_chip); ++ return PTR_ERR(pc->pctl_dev); ++ } + -+ platform_set_drvdata(pdev, pctl); ++ pc->gpio_range.name = MODULE_NAME; ++ pc->gpio_range.npins = BCM63268_NUM_GPIOS; ++ pc->gpio_range.base = pc->gpio_chip.base; ++ pc->gpio_range.gc = &pc->gpio_chip; ++ pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range); + -+ pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl, -+ pctl->gpio, BCM63268_NGPIO); -+ if (IS_ERR(pctl->pctldev)) -+ return PTR_ERR(pctl->pctldev); ++ dev_info(dev, "registered\n"); + + return 0; +} @@ -741,7 +867,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> +static struct platform_driver bcm63268_pinctrl_driver = { + .probe = bcm63268_pinctrl_probe, + .driver = { -+ .name = "bcm63268-pinctrl", ++ .name = MODULE_NAME, + .of_match_table = bcm63268_pinctrl_match, + }, +}; diff --git a/target/linux/bmips/patches-5.10/410-Documentation-add-BCM6318-pincontroller-binding-docu.patch b/target/linux/bmips/patches-5.10/410-Documentation-add-BCM6318-pincontroller-binding-docu.patch new file mode 100644 index 0000000000..6577038756 --- /dev/null +++ b/target/linux/bmips/patches-5.10/410-Documentation-add-BCM6318-pincontroller-binding-docu.patch @@ -0,0 +1,194 @@ +From f909bf5d5cf3db6b35c082f27f7982dfcb1447c2 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com> +Date: Wed, 27 Jul 2016 11:38:05 +0200 +Subject: [PATCH 11/12] Documentation: add BCM6318 pincontroller binding + documentation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add binding documentation for the pincontrol core found in BCM6318 SoCs. + +Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> +Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> +--- + .../pinctrl/brcm,bcm6318-pinctrl.yaml | 173 ++++++++++++++++++ + 1 file changed, 173 insertions(+) + create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml +@@ -0,0 +1,173 @@ ++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6318-pinctrl.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Broadcom BCM6318 pin controller ++ ++maintainers: ++ - Álvaro Fernández Rojas <noltari@gmail.com> ++ - Jonas Gorski <jonas.gorski@gmail.com> ++ ++description: |+ ++ The pin controller node should be the child of a syscon node. ++ ++ Refer to the the bindings described in ++ Documentation/devicetree/bindings/mfd/syscon.yaml ++ ++properties: ++ compatible: ++ const: brcm,bcm6318-pinctrl ++ ++ gpio-controller: true ++ ++ '#gpio-cells': ++ description: ++ Specifies the pin number and flags, as defined in ++ include/dt-bindings/gpio/gpio.h ++ const: 2 ++ ++ interrupts-extended: ++ description: ++ One interrupt per each of the 2 GPIO ports supported by the controller, ++ sorted by port number ascending order. ++ minItems: 2 ++ maxItems: 2 ++ ++patternProperties: ++ '^.*$': ++ if: ++ type: object ++ then: ++ properties: ++ function: ++ $ref: "/schemas/types.yaml#/definitions/string" ++ enum: [ ephy0_spd_led, ephy1_spd_led, ephy2_spd_led, ephy3_spd_led, ++ ephy0_act_led, ephy1_act_led, ephy2_act_led, ephy3_act_led, ++ serial_led_data, serial_led_clk, inet_act_led, inet_fail_led, ++ dsl_led, post_fail_led, wlan_wps_led, usb_pwron, ++ usb_device_led, usb_active ] ++ ++ pins: ++ $ref: "/schemas/types.yaml#/definitions/string" ++ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, ++ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ] ++ ++required: ++ - compatible ++ - gpio-controller ++ - '#gpio-cells' ++ ++additionalProperties: false ++ ++examples: ++ - | ++ gpio@10000080 { ++ compatible = "syscon", "simple-mfd"; ++ reg = <0x10000080 0x80>; ++ ++ pinctrl: pinctrl { ++ compatible = "brcm,bcm6318-pinctrl"; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ interrupts-extended = <&ext_intc 0 0>, ++ <&ext_intc 1 0>; ++ interrupt-names = "gpio33", ++ "gpio34"; ++ ++ pinctrl_ephy0_spd_led: ephy0_spd_led { ++ function = "ephy0_spd_led"; ++ pins = "gpio0"; ++ }; ++ ++ pinctrl_ephy1_spd_led: ephy1_spd_led { ++ function = "ephy1_spd_led"; ++ pins = "gpio1"; ++ }; ++ ++ pinctrl_ephy2_spd_led: ephy2_spd_led { ++ function = "ephy2_spd_led"; ++ pins = "gpio2"; ++ }; ++ ++ pinctrl_ephy3_spd_led: ephy3_spd_led { ++ function = "ephy3_spd_led"; ++ pins = "gpio3"; ++ }; ++ ++ pinctrl_ephy0_act_led: ephy0_act_led { ++ function = "ephy0_act_led"; ++ pins = "gpio4"; ++ }; ++ ++ pinctrl_ephy1_act_led: ephy1_act_led { ++ function = "ephy1_act_led"; ++ pins = "gpio5"; ++ }; ++ ++ pinctrl_ephy2_act_led: ephy2_act_led { ++ function = "ephy2_act_led"; ++ pins = "gpio6"; ++ }; ++ ++ pinctrl_ephy3_act_led: ephy3_act_led { ++ function = "ephy3_act_led"; ++ pins = "gpio7"; ++ }; ++ ++ pinctrl_serial_led: serial_led { ++ pinctrl_serial_led_data: serial_led_data { ++ function = "serial_led_data"; ++ pins = "gpio6"; ++ }; ++ ++ pinctrl_serial_led_clk: serial_led_clk { ++ function = "serial_led_clk"; ++ pins = "gpio7"; ++ }; ++ }; ++ ++ pinctrl_inet_act_led: inet_act_led { ++ function = "inet_act_led"; ++ pins = "gpio8"; ++ }; ++ ++ pinctrl_inet_fail_led: inet_fail_led { ++ function = "inet_fail_led"; ++ pins = "gpio9"; ++ }; ++ ++ pinctrl_dsl_led: dsl_led { ++ function = "dsl_led"; ++ pins = "gpio10"; ++ }; ++ ++ pinctrl_post_fail_led: post_fail_led { ++ function = "post_fail_led"; ++ pins = "gpio11"; ++ }; ++ ++ pinctrl_wlan_wps_led: wlan_wps_led { ++ function = "wlan_wps_led"; ++ pins = "gpio12"; ++ }; ++ ++ pinctrl_usb_pwron: usb_pwron { ++ function = "usb_pwron"; ++ pins = "gpio13"; ++ }; ++ ++ pinctrl_usb_device_led: usb_device_led { ++ function = "usb_device_led"; ++ pins = "gpio13"; ++ }; ++ ++ pinctrl_usb_active: usb_active { ++ function = "usb_active"; ++ pins = "gpio40"; ++ }; ++ }; ++ }; diff --git a/target/linux/bmips/patches-5.10/411-Documentation-add-BCM6318-pincontroller-binding-docu.patch b/target/linux/bmips/patches-5.10/411-Documentation-add-BCM6318-pincontroller-binding-docu.patch deleted file mode 100644 index 5d4265f7fe..0000000000 --- a/target/linux/bmips/patches-5.10/411-Documentation-add-BCM6318-pincontroller-binding-docu.patch +++ /dev/null @@ -1,96 +0,0 @@ -From 8439e5d2e69f54a532bb5f8ec001b4b5a3035574 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jonas.gorski@gmail.com> -Date: Wed, 27 Jul 2016 11:38:05 +0200 -Subject: [PATCH 14/16] Documentation: add BCM6318 pincontroller binding - documentation - -Add binding documentation for the pincontrol core found in BCM6318 SoCs. - -Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> ---- - .../bindings/pinctrl/brcm,bcm6318-pinctrl.txt | 79 ++++++++++++++++++++++ - 1 file changed, 79 insertions(+) - create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.txt -@@ -0,0 +1,79 @@ -+* Broadcom BCM6318 pin controller -+ -+Required properties: -+- compatible: Must be "brcm,bcm6318-pinctrl". -+- regs: Register specifiers of dirout, dat, mode, mux, and pad registers. -+- reg-names: Must be "dirout", "dat", "mode", "mux", "pad". -+- gpio-controller: Identifies this node as a gpio controller. -+- #gpio-cells: Must be <2>. -+ -+Example: -+ -+pinctrl: pin-controller@10000080 { -+ compatible = "brcm,bcm6318-pinctrl"; -+ reg = <0x10000080 0x08>, -+ <0x10000088 0x08>, -+ <0x10000098 0x04>, -+ <0x1000009c 0x0c>, -+ <0x100000d4 0x18>; -+ reg-names = "dirout", "dat", "mode", "mux", "pad"; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+}; -+ -+ -+Available pins/groups and functions: -+ -+name pins functions -+----------------------------------------------------------- -+gpio0 0 led, ephy0_spd_led -+gpio1 1 led, ephy1_spd_led -+gpio2 2 led, ephy2_spd_led -+gpio3 3 led, ephy3_spd_led -+gpio4 4 led, ephy0_act_led -+gpio5 5 led, ephy1_act_led -+gpio6 6 led, ephy2_act_led, serial_led_data -+gpio7 7 led, ephy3_act_led, serial_led_clk -+gpio8 8 led, inet_act_led -+gpio9 9 led, inet_fail_led -+gpio10 10 led, dsl_led -+gpio11 11 led, post_fail_led -+gpio12 12 led, wlan_wps_led -+gpio13 13 led, usb_pwron, usb_device_led -+gpio14 14 led -+gpio15 15 led -+gpio16 16 led -+gpio17 17 led -+gpio18 18 led -+gpio19 19 led -+gpio20 20 led -+gpio21 21 led -+gpio22 22 led -+gpio23 23 led -+gpio24 24 - -+gpio25 25 - -+gpio26 26 - -+gpio27 27 - -+gpio28 28 - -+gpio29 29 - -+gpio30 30 - -+gpio31 31 - -+gpio32 32 - -+gpio33 33 - -+gpio34 34 - -+gpio35 35 - -+gpio36 36 - -+gpio37 37 - -+gpio38 38 - -+gpio39 39 - -+gpio40 40 usb_active -+gpio41 41 - -+gpio42 42 - -+gpio43 43 - -+gpio44 44 - -+gpio45 45 - -+gpio46 46 - -+gpio47 47 - -+gpio48 48 - -+gpio49 49 - diff --git a/target/linux/bmips/patches-5.10/412-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch b/target/linux/bmips/patches-5.10/411-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch index 1cc907434c..b57b49d35f 100644 --- a/target/linux/bmips/patches-5.10/412-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch +++ b/target/linux/bmips/patches-5.10/411-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch @@ -1,77 +1,96 @@ -From bd9c250ef85e6f99aa5d59b21abb87d0a48f2f61 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jonas.gorski@gmail.com> +From e1764f96eb563a11c822ff91d1c6d7ed01c3925b Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com> Date: Fri, 24 Jun 2016 22:20:39 +0200 -Subject: [PATCH 15/16] pinctrl: add a pincontrol driver for BCM6318 +Subject: [PATCH 12/12] pinctrl: add a pincontrol driver for BCM6318 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit Add a pincontrol driver for BCM6318. BCM6318 allows muxing most GPIOs to different functions. BCM6318 is similar to BCM6328 with the addition of a pad register, and the GPIO meaning of the mux register changes based on the GPIO number. +Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> --- - drivers/pinctrl/bcm63xx/Kconfig | 7 + - drivers/pinctrl/bcm63xx/Makefile | 1 + - drivers/pinctrl/bcm63xx/pinctrl-bcm6318.c | 564 ++++++++++++++++++++++++++++++ - 3 files changed, 572 insertions(+) - create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6318.c + drivers/pinctrl/bcm/Kconfig | 11 + + drivers/pinctrl/bcm/Makefile | 1 + + drivers/pinctrl/bcm/pinctrl-bcm6318.c | 674 ++++++++++++++++++++++++++ + 3 files changed, 686 insertions(+) + create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6318.c ---- a/drivers/pinctrl/bcm63xx/Kconfig -+++ b/drivers/pinctrl/bcm63xx/Kconfig -@@ -2,6 +2,13 @@ config PINCTRL_BCM63XX - bool - select GPIO_GENERIC +--- a/drivers/pinctrl/bcm/Kconfig ++++ b/drivers/pinctrl/bcm/Kconfig +@@ -29,6 +29,17 @@ config PINCTRL_BCM2835 + help + Say Y here to enable the Broadcom BCM2835 GPIO driver. +config PINCTRL_BCM6318 -+ bool "BCM6318 pincontrol driver" ++ bool "Broadcom BCM6318 GPIO driver" ++ depends on OF_GPIO && (BMIPS_GENERIC || COMPILE_TEST) + select PINMUX + select PINCONF -+ select PINCTRL_BCM63XX + select GENERIC_PINCONF ++ select MFD_SYSCON ++ default BMIPS_GENERIC ++ help ++ Say Y here to enable the Broadcom BCM6318 GPIO driver. + config PINCTRL_BCM6328 - bool "BCM6328 pincontrol driver" - select PINMUX ---- a/drivers/pinctrl/bcm63xx/Makefile -+++ b/drivers/pinctrl/bcm63xx/Makefile -@@ -1,4 +1,5 @@ - obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o -+obj-$(CONFIG_PINCTRL_BCM6318) += pinctrl-bcm6318.o - obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o - obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o - obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o + bool "Broadcom BCM6328 GPIO driver" + depends on OF_GPIO && (BMIPS_GENERIC || COMPILE_TEST) +--- a/drivers/pinctrl/bcm/Makefile ++++ b/drivers/pinctrl/bcm/Makefile +@@ -3,6 +3,7 @@ + + obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o + obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o ++obj-$(CONFIG_PINCTRL_BCM6318) += pinctrl-bcm6318.o + obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o + obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o + obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o --- /dev/null -+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6318.c -@@ -0,0 +1,564 @@ ++++ b/drivers/pinctrl/bcm/pinctrl-bcm6318.c +@@ -0,0 +1,674 @@ ++// SPDX-License-Identifier: GPL-2.0+ +/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. ++ * Driver for BCM6318 GPIO unit (pinctrl + GPIO) + * ++ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com> + * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com> + */ + -+#include <linux/kernel.h> -+#include <linux/spinlock.h> +#include <linux/bitops.h> +#include <linux/gpio.h> -+#include <linux/gpio/driver.h> ++#include <linux/kernel.h> ++#include <linux/mfd/syscon.h> +#include <linux/of.h> +#include <linux/of_gpio.h> -+#include <linux/slab.h> ++#include <linux/of_irq.h> +#include <linux/platform_device.h> ++#include <linux/regmap.h> + ++#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinmux.h> -+#include <linux/pinctrl/machine.h> + +#include "../core.h" +#include "../pinctrl-utils.h" + -+#include "pinctrl-bcm63xx.h" ++#define MODULE_NAME "bcm6318-pinctrl" ++#define BCM6318_NUM_GPIOS 50 ++#define BCM6318_NUM_MUX 48 ++ ++#define BANK_SIZE sizeof(uint32_t) ++#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE) + -+#define BCM6318_NGPIO 50 ++#define BCM6318_DIROUT_REG 0x04 ++#define BCM6318_DATA_REG 0x0c ++#define BCM6318_MODE_REG 0x18 ++#define BCM6318_MUX_REG 0x1c ++#define BCM6318_PAD_REG 0x54 + +struct bcm6318_pingroup { + const char *name; @@ -89,17 +108,13 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> +}; + +struct bcm6318_pinctrl { -+ struct pinctrl_dev *pctldev; -+ struct pinctrl_desc desc; -+ -+ void __iomem *mode; -+ void __iomem *mux[3]; -+ void __iomem *pad[6]; -+ -+ /* register access lock */ -+ spinlock_t lock; ++ struct device *dev; ++ struct regmap *regs; + -+ struct gpio_chip gpio[2]; ++ struct pinctrl_dev *pctl_dev; ++ struct gpio_chip gpio_chip; ++ struct pinctrl_desc pctl_desc; ++ struct pinctrl_gpio_range gpio_range; +}; + +static const struct pinctrl_pin_desc bcm6318_pins[] = { @@ -405,6 +420,118 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> + BCM6318_MUX_FUN(usb_active, 2), +}; + ++static inline unsigned int bcm6318_bank_pin(unsigned int pin) ++{ ++ return pin % PINS_PER_BANK; ++} ++ ++static inline unsigned int bcm6318_mux_off(unsigned int pin) ++{ ++ return BCM6318_MUX_REG + (pin / 16) * BANK_SIZE; ++} ++ ++static inline unsigned int bcm6318_pad_off(unsigned int pin) ++{ ++ return BCM6318_PAD_REG + (pin / 8) * BANK_SIZE; ++} ++ ++static inline unsigned int bcm6318_reg_off(unsigned int reg, unsigned int pin) ++{ ++ return reg - (pin / PINS_PER_BANK) * BANK_SIZE; ++} ++ ++static int bcm6318_gpio_direction_input(struct gpio_chip *chip, ++ unsigned int pin) ++{ ++ struct bcm6318_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int dirout = bcm6318_reg_off(BCM6318_DIROUT_REG, pin); ++ unsigned int bank_pin = bcm6318_bank_pin(pin); ++ int ret; ++ ++ /* ++ * Check with the pinctrl driver whether this pin is usable as ++ * an input GPIO ++ */ ++ ret = pinctrl_gpio_direction_input(chip->base + pin); ++ if (ret) ++ return ret; ++ ++ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), 0); ++ ++ return 0; ++} ++ ++static int bcm6318_gpio_direction_output(struct gpio_chip *chip, ++ unsigned int pin, int value) ++{ ++ struct bcm6318_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int data = bcm6318_reg_off(BCM6318_DATA_REG, pin); ++ unsigned int dirout = bcm6318_reg_off(BCM6318_DIROUT_REG, pin); ++ unsigned int bank_pin = bcm6318_bank_pin(pin); ++ unsigned int val = value ? BIT(bank_pin) : 0; ++ int ret; ++ ++ /* ++ * Check with the pinctrl driver whether this pin is usable as ++ * an output GPIO ++ */ ++ ret = pinctrl_gpio_direction_output(chip->base + pin); ++ if (ret) ++ return ret; ++ ++ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), BIT(bank_pin)); ++ regmap_update_bits(pc->regs, data, BIT(bank_pin), val); ++ ++ return 0; ++} ++ ++static int bcm6318_gpio_get(struct gpio_chip *chip, unsigned int pin) ++{ ++ struct bcm6318_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int data = bcm6318_reg_off(BCM6318_DATA_REG, pin); ++ unsigned int bank_pin = bcm6318_bank_pin(pin); ++ unsigned int val; ++ ++ regmap_read(pc->regs, data, &val); ++ ++ return !!(val & BIT(bank_pin)); ++} ++ ++static int bcm6318_gpio_get_direction(struct gpio_chip *chip, unsigned int pin) ++{ ++ struct bcm6318_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int dirout = bcm6318_reg_off(BCM6318_DIROUT_REG, pin); ++ unsigned int bank_pin = bcm6318_bank_pin(pin); ++ unsigned int val; ++ ++ regmap_read(pc->regs, dirout, &val); ++ ++ if (val & BIT(bank_pin)) ++ return GPIO_LINE_DIRECTION_OUT; ++ ++ return GPIO_LINE_DIRECTION_IN; ++} ++ ++static void bcm6318_gpio_set(struct gpio_chip *chip, unsigned int pin, ++ int value) ++{ ++ struct bcm6318_pinctrl *pc = gpiochip_get_data(chip); ++ unsigned int data = bcm6318_reg_off(BCM6318_DATA_REG, pin); ++ unsigned int bank_pin = bcm6318_bank_pin(pin); ++ unsigned int val = value ? BIT(bank_pin) : 0; ++ ++ regmap_update_bits(pc->regs, data, BIT(bank_pin), val); ++} ++ ++static int bcm6318_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) ++{ ++ char irq_name[7]; ++ ++ sprintf(irq_name, "gpio%d", gpio); ++ ++ return of_irq_get_byname(chip->of_node, irq_name); ++} ++ +static int bcm6318_pinctrl_get_group_count(struct pinctrl_dev *pctldev) +{ + return ARRAY_SIZE(bcm6318_groups); @@ -448,51 +575,36 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> + return 0; +} + -+static void bcm6318_rmw_mux(struct bcm6318_pinctrl *pctl, unsigned pin, -+ u32 mode, u32 mux) ++static inline void bcm6318_rmw_mux(struct bcm6318_pinctrl *pc, unsigned pin, ++ unsigned int mode, unsigned int mux) +{ -+ unsigned long flags; -+ u32 reg; -+ -+ spin_lock_irqsave(&pctl->lock, flags); -+ if (pin < 32) { -+ reg = __raw_readl(pctl->mode); -+ reg &= ~BIT(pin); -+ if (mode) -+ reg |= BIT(pin); -+ __raw_writel(reg, pctl->mode); -+ } -+ -+ if (pin < 48) { -+ reg = __raw_readl(pctl->mux[pin / 16]); -+ reg &= ~(3UL << ((pin % 16) * 2)); -+ reg |= mux << ((pin % 16) * 2); -+ __raw_writel(reg, pctl->mux[pin / 16]); -+ } -+ spin_unlock_irqrestore(&pctl->lock, flags); ++ if (pin < PINS_PER_BANK) ++ regmap_update_bits(pc->regs, BCM6318_MODE_REG, BIT(pin), ++ mode ? BIT(pin) : 0); ++ ++ if (pin < BCM6318_NUM_MUX) ++ regmap_update_bits(pc->regs, ++ bcm6318_mux_off(pin), ++ 3UL << ((pin % 16) * 2), ++ mux << ((pin % 16) * 2)); +} + -+static void bcm6318_set_pad(struct bcm6318_pinctrl *pctl, unsigned pin, u8 val) ++static inline void bcm6318_set_pad(struct bcm6318_pinctrl *pc, unsigned pin, ++ uint8_t val) +{ -+ unsigned long flags; -+ u32 reg; -+ -+ spin_lock_irqsave(&pctl->lock, flags); -+ reg = __raw_readl(pctl->pad[pin / 8]); -+ reg &= ~(0xfUL << ((pin % 8) * 4)); -+ reg |= val << ((pin % 8) * 4); -+ __raw_writel(reg, pctl->pad[pin / 8]); -+ spin_unlock_irqrestore(&pctl->lock, flags); ++ regmap_update_bits(pc->regs, bcm6318_pad_off(pin), ++ 0xfUL << ((pin % 8) * 4), ++ val << ((pin % 8) * 4)); +} + +static int bcm6318_pinctrl_set_mux(struct pinctrl_dev *pctldev, + unsigned selector, unsigned group) +{ -+ struct bcm6318_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); -+ const struct bcm6318_pingroup *grp = &bcm6318_groups[group]; ++ struct bcm6318_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); ++ const struct bcm6318_pingroup *pg = &bcm6318_groups[group]; + const struct bcm6318_function *f = &bcm6318_funcs[selector]; + -+ bcm6318_rmw_mux(pctl, grp->pins[0], f->mode_val, f->mux_val); ++ bcm6318_rmw_mux(pc, pg->pins[0], f->mode_val, f->mux_val); + + return 0; +} @@ -501,94 +613,102 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> + struct pinctrl_gpio_range *range, + unsigned offset) +{ -+ struct bcm6318_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); ++ struct bcm6318_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); + + /* disable all functions using this pin */ + if (offset < 13) { + /* GPIOs 0-12 use mux 0 as GPIO function */ -+ bcm6318_rmw_mux(pctl, offset, 0, 0); ++ bcm6318_rmw_mux(pc, offset, 0, 0); + } else if (offset < 42) { + /* GPIOs 13-41 use mux 3 as GPIO function */ -+ bcm6318_rmw_mux(pctl, offset, 0, 3); ++ bcm6318_rmw_mux(pc, offset, 0, 3); + -+ /* FIXME: revert to old value for non gpio? */ -+ bcm6318_set_pad(pctl, offset, 0); -+ } else { -+ /* no idea, really */ ++ bcm6318_set_pad(pc, offset, 0); + } + + return 0; +} + +static struct pinctrl_ops bcm6318_pctl_ops = { -+ .get_groups_count = bcm6318_pinctrl_get_group_count, -+ .get_group_name = bcm6318_pinctrl_get_group_name, -+ .get_group_pins = bcm6318_pinctrl_get_group_pins, -+#ifdef CONFIG_OF -+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, -+ .dt_free_map = pinctrl_utils_free_map, -+#endif ++ .get_groups_count = bcm6318_pinctrl_get_group_count, ++ .get_group_name = bcm6318_pinctrl_get_group_name, ++ .get_group_pins = bcm6318_pinctrl_get_group_pins, ++ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, ++ .dt_free_map = pinctrl_utils_free_map, +}; + +static struct pinmux_ops bcm6318_pmx_ops = { -+ .get_functions_count = bcm6318_pinctrl_get_func_count, -+ .get_function_name = bcm6318_pinctrl_get_func_name, -+ .get_function_groups = bcm6318_pinctrl_get_groups, -+ .set_mux = bcm6318_pinctrl_set_mux, -+ .gpio_request_enable = bcm6318_gpio_request_enable, -+ .strict = true, ++ .get_functions_count = bcm6318_pinctrl_get_func_count, ++ .get_function_name = bcm6318_pinctrl_get_func_name, ++ .get_function_groups = bcm6318_pinctrl_get_groups, ++ .set_mux = bcm6318_pinctrl_set_mux, ++ .gpio_request_enable = bcm6318_gpio_request_enable, ++ .strict = true, +}; + +static int bcm6318_pinctrl_probe(struct platform_device *pdev) +{ -+ struct bcm6318_pinctrl *pctl; -+ struct resource *res; -+ void __iomem *mode, *mux, *pad; -+ unsigned i; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode"); -+ mode = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(mode)) -+ return PTR_ERR(mode); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mux"); -+ mux = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(mux)) -+ return PTR_ERR(mux); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pad"); -+ pad = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(pad)) -+ return PTR_ERR(pad); -+ -+ pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL); -+ if (!pctl) -+ return -ENOMEM; -+ -+ spin_lock_init(&pctl->lock); -+ -+ pctl->mode = mode; -+ -+ for (i = 0; i < 3; i++) -+ pctl->mux[i] = mux + (i * 4); ++ struct device *dev = &pdev->dev; ++ struct device_node *np = dev->of_node; ++ struct bcm6318_pinctrl *pc; ++ int err; + -+ for (i = 0; i < 6; i++) -+ pctl->pad[i] = pad + (i * 4); ++ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL); ++ if (!pc) ++ return -ENOMEM; + -+ pctl->desc.name = dev_name(&pdev->dev); -+ pctl->desc.owner = THIS_MODULE; -+ pctl->desc.pctlops = &bcm6318_pctl_ops; -+ pctl->desc.pmxops = &bcm6318_pmx_ops; ++ platform_set_drvdata(pdev, pc); ++ pc->dev = dev; ++ ++ pc->regs = syscon_node_to_regmap(dev->parent->of_node); ++ if (IS_ERR(pc->regs)) ++ return PTR_ERR(pc->regs); ++ ++ pc->gpio_chip.label = MODULE_NAME; ++ pc->gpio_chip.owner = THIS_MODULE; ++ pc->gpio_chip.request = gpiochip_generic_request; ++ pc->gpio_chip.free = gpiochip_generic_free; ++ pc->gpio_chip.direction_input = bcm6318_gpio_direction_input; ++ pc->gpio_chip.direction_output = bcm6318_gpio_direction_output; ++ pc->gpio_chip.get_direction = bcm6318_gpio_get_direction; ++ pc->gpio_chip.get = bcm6318_gpio_get; ++ pc->gpio_chip.set = bcm6318_gpio_set; ++ pc->gpio_chip.set_config = gpiochip_generic_config; ++ pc->gpio_chip.base = -1; ++ pc->gpio_chip.ngpio = BCM6318_NUM_GPIOS; ++ pc->gpio_chip.can_sleep = false; ++ pc->gpio_chip.parent = dev; ++ pc->gpio_chip.of_node = np; ++ ++ if (of_get_property(np, "interrupt-names", NULL)) ++ pc->gpio_chip.to_irq = bcm6318_gpio_to_irq; ++ ++ err = gpiochip_add_data(&pc->gpio_chip, pc); ++ if (err) { ++ dev_err(dev, "could not add GPIO chip\n"); ++ return err; ++ } + -+ pctl->desc.npins = ARRAY_SIZE(bcm6318_pins); -+ pctl->desc.pins = bcm6318_pins; ++ pc->pctl_desc.name = MODULE_NAME, ++ pc->pctl_desc.pins = bcm6318_pins, ++ pc->pctl_desc.npins = ARRAY_SIZE(bcm6318_pins), ++ pc->pctl_desc.pctlops = &bcm6318_pctl_ops, ++ pc->pctl_desc.pmxops = &bcm6318_pmx_ops, ++ pc->pctl_desc.owner = THIS_MODULE, ++ ++ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc); ++ if (IS_ERR(pc->pctl_dev)) { ++ gpiochip_remove(&pc->gpio_chip); ++ return PTR_ERR(pc->pctl_dev); ++ } + -+ platform_set_drvdata(pdev, pctl); ++ pc->gpio_range.name = MODULE_NAME; ++ pc->gpio_range.npins = BCM6318_NUM_GPIOS; ++ pc->gpio_range.base = pc->gpio_chip.base; ++ pc->gpio_range.gc = &pc->gpio_chip; ++ pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range); + -+ pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl, -+ pctl->gpio, BCM6318_NGPIO); -+ if (IS_ERR(pctl->pctldev)) -+ return PTR_ERR(pctl->pctldev); ++ dev_info(dev, "registered\n"); + + return 0; +} @@ -601,7 +721,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> +static struct platform_driver bcm6318_pinctrl_driver = { + .probe = bcm6318_pinctrl_probe, + .driver = { -+ .name = "bcm6318-pinctrl", ++ .name = MODULE_NAME, + .of_match_table = bcm6318_pinctrl_match, + }, +}; |