diff options
Diffstat (limited to 'target/linux/bcm63xx')
| -rw-r--r-- | target/linux/bcm63xx/patches-5.4/120-leds-bcm6328-support-second-hw-blinking-interval.patch | 137 |
1 files changed, 137 insertions, 0 deletions
diff --git a/target/linux/bcm63xx/patches-5.4/120-leds-bcm6328-support-second-hw-blinking-interval.patch b/target/linux/bcm63xx/patches-5.4/120-leds-bcm6328-support-second-hw-blinking-interval.patch new file mode 100644 index 0000000000..6ed26f2741 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/120-leds-bcm6328-support-second-hw-blinking-interval.patch @@ -0,0 +1,137 @@ +--- a/drivers/leds/leds-bcm6328.c ++++ b/drivers/leds/leds-bcm6328.c +@@ -24,12 +24,16 @@ + + #define BCM6328_LED_MAX_COUNT 24 + #define BCM6328_LED_DEF_DELAY 500 ++#define BCM6328_LED_INTERVAL_NUM 2 + #define BCM6328_LED_INTERVAL_MS 20 + + #define BCM6328_LED_INTV_MASK 0x3f +-#define BCM6328_LED_FAST_INTV_SHIFT 6 +-#define BCM6328_LED_FAST_INTV_MASK (BCM6328_LED_INTV_MASK << \ +- BCM6328_LED_FAST_INTV_SHIFT) ++#define BCM6328_LED_INTV1_SHIFT 0 ++#define BCM6328_LED_INTV1_MASK (BCM6328_LED_INTV_MASK << \ ++ BCM6328_LED_INTV1_SHIFT) ++#define BCM6328_LED_INTV2_SHIFT 6 ++#define BCM6328_LED_INTV2_MASK (BCM6328_LED_INTV_MASK << \ ++ BCM6328_LED_INTV2_SHIFT) + #define BCM6328_SERIAL_LED_EN BIT(12) + #define BCM6328_SERIAL_LED_MUX BIT(13) + #define BCM6328_SERIAL_LED_CLK_NPOL BIT(14) +@@ -45,8 +49,8 @@ + + #define BCM6328_LED_MODE_MASK 3 + #define BCM6328_LED_MODE_ON 0 +-#define BCM6328_LED_MODE_FAST 1 +-#define BCM6328_LED_MODE_BLINK 2 ++#define BCM6328_LED_MODE_INTV1 1 ++#define BCM6328_LED_MODE_INTV2 2 + #define BCM6328_LED_MODE_OFF 3 + #define BCM6328_LED_SHIFT(X) ((X) << 1) + +@@ -127,12 +131,18 @@ static void bcm6328_led_set(struct led_c + unsigned long flags; + + spin_lock_irqsave(led->lock, flags); +- *(led->blink_leds) &= ~BIT(led->pin); ++ ++ /* Remove LED from cached HW blinking intervals */ ++ led->blink_leds[0] &= ~BIT(led->pin); ++ led->blink_leds[1] &= ~BIT(led->pin); ++ ++ /* Set LED on/off */ + if ((led->active_low && value == LED_OFF) || + (!led->active_low && value != LED_OFF)) + bcm6328_led_mode(led, BCM6328_LED_MODE_ON); + else + bcm6328_led_mode(led, BCM6328_LED_MODE_OFF); ++ + spin_unlock_irqrestore(led->lock, flags); + } + +@@ -176,20 +186,59 @@ static int bcm6328_blink_set(struct led_ + } + + spin_lock_irqsave(led->lock, flags); +- if (*(led->blink_leds) == 0 || +- *(led->blink_leds) == BIT(led->pin) || +- *(led->blink_delay) == delay) { ++ /* ++ * Check if any of the two configurable HW blinking intervals is ++ * available: ++ * 1. No LEDs assigned to the HW blinking interval. ++ * 2. LEDs with the same delay assigned. ++ */ ++ if (led->blink_leds[0] == 0 || ++ led->blink_leds[0] == BIT(led->pin) || ++ led->blink_delay[0] == delay) { ++ unsigned long val; ++ ++ /* Add LED to the first HW blinking interval cache */ ++ led->blink_leds[0] |= BIT(led->pin); ++ ++ /* Remove LED from the second HW blinking interval cache */ ++ led->blink_leds[1] &= ~BIT(led->pin); ++ ++ /* Cache the LED in the first HW blinking interval delay */ ++ led->blink_delay[0] = delay; ++ ++ /* Update the delay for the first HW blinking interval */ ++ val = bcm6328_led_read(led->mem + BCM6328_REG_INIT); ++ val &= ~BCM6328_LED_INTV1_MASK; ++ val |= (delay << BCM6328_LED_INTV1_SHIFT); ++ bcm6328_led_write(led->mem + BCM6328_REG_INIT, val); ++ ++ /* Set the LED to first HW blinking interval */ ++ bcm6328_led_mode(led, BCM6328_LED_MODE_INTV1); ++ ++ rc = 0; ++ } else if (led->blink_leds[1] == 0 || ++ led->blink_leds[1] == BIT(led->pin) || ++ led->blink_delay[1] == delay) { + unsigned long val; + +- *(led->blink_leds) |= BIT(led->pin); +- *(led->blink_delay) = delay; ++ /* Remove LED from the first HW blinking interval */ ++ led->blink_leds[0] &= ~BIT(led->pin); ++ ++ /* Add LED to the second HW blinking interval */ ++ led->blink_leds[1] |= BIT(led->pin); + ++ /* Cache the LED in the first HW blinking interval delay */ ++ led->blink_delay[1] = delay; ++ ++ /* Update the delay for the second HW blinking interval */ + val = bcm6328_led_read(led->mem + BCM6328_REG_INIT); +- val &= ~BCM6328_LED_FAST_INTV_MASK; +- val |= (delay << BCM6328_LED_FAST_INTV_SHIFT); ++ val &= ~BCM6328_LED_INTV2_MASK; ++ val |= (delay << BCM6328_LED_INTV2_SHIFT); + bcm6328_led_write(led->mem + BCM6328_REG_INIT, val); + +- bcm6328_led_mode(led, BCM6328_LED_MODE_BLINK); ++ /* Set the LED to second HW blinking interval */ ++ bcm6328_led_mode(led, BCM6328_LED_MODE_INTV2); ++ + rc = 0; + } else { + dev_dbg(led_cdev->dev, +@@ -363,11 +412,13 @@ static int bcm6328_leds_probe(struct pla + if (!lock) + return -ENOMEM; + +- blink_leds = devm_kzalloc(dev, sizeof(*blink_leds), GFP_KERNEL); ++ blink_leds = devm_kcalloc(dev, BCM6328_LED_INTERVAL_NUM, ++ sizeof(*blink_leds), GFP_KERNEL); + if (!blink_leds) + return -ENOMEM; + +- blink_delay = devm_kzalloc(dev, sizeof(*blink_delay), GFP_KERNEL); ++ blink_delay = devm_kcalloc(dev, BCM6328_LED_INTERVAL_NUM, ++ sizeof(*blink_delay), GFP_KERNEL); + if (!blink_delay) + return -ENOMEM; + |