aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm53xx/patches-5.4/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/bcm53xx/patches-5.4/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch')
-rw-r--r--target/linux/bcm53xx/patches-5.4/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch101
1 files changed, 0 insertions, 101 deletions
diff --git a/target/linux/bcm53xx/patches-5.4/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch b/target/linux/bcm53xx/patches-5.4/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch
deleted file mode 100644
index 034d5b52fc..0000000000
--- a/target/linux/bcm53xx/patches-5.4/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 24 Sep 2014 22:14:07 +0200
-Subject: [PATCH] ARM: BCM5301X: Disable MMU and Dcache during decompression
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom devices have broken CFE (bootloader) that leaves hardware in an
-invalid state. It causes problems with booting Linux. On Northstar
-devices kernel was randomly hanging in ~25% of tries during early init.
-Hangs used to happen at random places in the start_kernel. On BCM53573
-kernel doesn't even seem to start booting.
-
-To workaround this problem we need to do following very early:
-1) Clear 2 following bits in the SCTLR register:
-#define CR_M (1 << 0) /* MMU enable */
-#define CR_C (1 << 2) /* Dcache enable */
-2) Flush the whole D-cache
-3) Disable L2 cache
-
-Unfortunately this patch is not upstreamable as it does above things
-unconditionally. We can't check if we are running on Broadcom platform
-in any safe way and doing such hacks with ARCH_MULTI_V7 is unacceptable
-as it could break other devices support.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm/boot/compressed/Makefile
-+++ b/arch/arm/boot/compressed/Makefile
-@@ -35,6 +35,11 @@ ifeq ($(CONFIG_ARCH_ACORN),y)
- OBJS += ll_char_wr.o font.o
- endif
-
-+ifeq ($(CONFIG_ARCH_BCM_5301X),y)
-+OBJS += head-bcm_5301x-mpcore.o
-+OBJS += cache-v7-min.o
-+endif
-+
- ifeq ($(CONFIG_ARCH_SA1100),y)
- OBJS += head-sa1100.o
- endif
---- /dev/null
-+++ b/arch/arm/boot/compressed/head-bcm_5301x-mpcore.S
-@@ -0,0 +1,37 @@
-+/*
-+ *
-+ * Platform specific tweaks. This is merged into head.S by the linker.
-+ *
-+ */
-+
-+#include <linux/linkage.h>
-+#include <asm/assembler.h>
-+#include <asm/cp15.h>
-+
-+ .section ".start", "ax"
-+
-+/*
-+ * This code section is spliced into the head code by the linker
-+ */
-+
-+__plat_uncompress_start:
-+
-+ @ Preserve r8/r7 i.e. kernel entry values
-+ mov r12, r8
-+
-+ @ Clear MMU enable and Dcache enable bits
-+ mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR
-+ bic r0, #CR_C|CR_M
-+ mcr p15, 0, r0, c1, c0, 0 @ Write SCTLR
-+ nop
-+
-+ @ Call the cache invalidation routine
-+ bl v7_flush_dcache_all
-+ nop
-+ mov r0,#0
-+ ldr r3, =0x19022000 @ L2 cache controller, control reg
-+ str r0, [r3, #0x100] @ Disable L2 cache
-+ nop
-+
-+ @ Restore
-+ mov r8, r12
---- a/arch/arm/boot/compressed/cache-v7-min.S
-+++ b/arch/arm/boot/compressed/cache-v7-min.S
-@@ -12,6 +12,7 @@
-
- #include <linux/linkage.h>
- #include <linux/init.h>
-+#include <asm/assembler.h>
-
- __INIT
-
-@@ -63,7 +64,7 @@ loop2:
- ARM( orr r11, r11, r9, lsl r2 ) @ factor index number into r11
- THUMB( lsl r6, r9, r2 )
- THUMB( orr r11, r11, r6 ) @ factor index number into r11
-- mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way
-+ mcr p15, 0, r11, c7, c6, 2 @ clean & invalidate by set/way
- subs r9, r9, #1 @ decrement the index
- bge loop2
- subs r4, r4, #1 @ decrement the way