diff options
Diffstat (limited to 'target/linux/bcm53xx/patches-4.4/040-ARM-dts-BCM5301x-Add-BCM953012ER-board.patch')
| -rw-r--r-- | target/linux/bcm53xx/patches-4.4/040-ARM-dts-BCM5301x-Add-BCM953012ER-board.patch | 139 |
1 files changed, 139 insertions, 0 deletions
diff --git a/target/linux/bcm53xx/patches-4.4/040-ARM-dts-BCM5301x-Add-BCM953012ER-board.patch b/target/linux/bcm53xx/patches-4.4/040-ARM-dts-BCM5301x-Add-BCM953012ER-board.patch new file mode 100644 index 0000000000..dd24e2624d --- /dev/null +++ b/target/linux/bcm53xx/patches-4.4/040-ARM-dts-BCM5301x-Add-BCM953012ER-board.patch @@ -0,0 +1,139 @@ +From f8c331bda6a90b239f600020eec1b0defe7249b5 Mon Sep 17 00:00:00 2001 +From: Florian Fainelli <f.fainelli@gmail.com> +Date: Wed, 22 Jun 2016 17:00:35 -0700 +Subject: [PATCH] ARM: dts: BCM5301x: Add BCM953012ER board + +Add support for the Broadcom BCM953012 Enterprise Router reference +board, enable the following peripherals: + +- UART0 (UART1 is not populated) +- WPS and restart GPIO buttons +- Ethernet switch w/ only two facing ports +- NAND flash +- SPI-NOR flash + +Acked-by: Jon Mason <jon.mason@broadcom.com> +Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/bcm953012er.dts | 104 ++++++++++++++++++++++++++++++++++++++ + 2 files changed, 105 insertions(+) + create mode 100644 arch/arm/boot/dts/bcm953012er.dts + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -79,6 +79,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ + bcm47094-dlink-dir-885l.dtb \ + bcm94708.dtb \ + bcm94709.dtb \ ++ bcm953012er.dtb \ + bcm953012k.dtb + dtb-$(CONFIG_ARCH_BCM_63XX) += \ + bcm963138dvt.dtb +--- /dev/null ++++ b/arch/arm/boot/dts/bcm953012er.dts +@@ -0,0 +1,104 @@ ++/* ++ * BSD LICENSE ++ * ++ * Copyright(c) 2016 Broadcom. All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in ++ * the documentation and/or other materials provided with the ++ * distribution. ++ * * Neither the name of Broadcom Corporation nor the names of its ++ * contributors may be used to endorse or promote products derived ++ * from this software without specific prior written permission. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ++ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ++ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT ++ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, ++ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT ++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, ++ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY ++ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE ++ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++/dts-v1/; ++ ++#include "bcm4708.dtsi" ++#include "bcm5301x-nand-cs0-bch8.dtsi" ++ ++/ { ++ model = "NorthStar Enterprise Router (BCM953012ER)"; ++ compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708"; ++ ++ aliases { ++ serial0 = &uart0; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ memory { ++ reg = <0x00000000 0x8000000>; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ wps { ++ label = "WPS"; ++ linux,code = <KEY_WPS_BUTTON>; ++ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; ++ }; ++ ++ restart { ++ label = "Reset"; ++ linux,code = <KEY_RESTART>; ++ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&spi_nor { ++ status = "okay"; ++}; ++ ++&srab { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ label = "port0"; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ label = "port1"; ++ }; ++ ++ port@5 { ++ reg = <5>; ++ label = "cpu"; ++ ethernet = <&gmac0>; ++ }; ++ }; ++}; |