1 files changed, 0 insertions, 80 deletions
diff --git a/target/linux/bcm53xx/patches-4.19/130-ARM-dts-BCM5301X-Add-DT-for-Luxul-XWC-2000.patch b/target/linux/bcm53xx/patches-4.19/130-ARM-dts-BCM5301X-Add-DT-for-Luxul-XWC-2000.patch
deleted file mode 100644
index beeeda7b95..0000000000
--- a/target/linux/bcm53xx/patches-4.19/130-ARM-dts-BCM5301X-Add-DT-for-Luxul-XWC-2000.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From: Dan Haab <dan.haab@legrand.com>
-Date: Wed, 2 Oct 2019 09:57:26 -0600
-Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XWC-2000
-
-It's a simple network device based on BCM47094 with just a single
-Ethernet port.
-
-Signed-off-by: Dan Haab <dan.haab@legrand.com>
----
- arch/arm/boot/dts/Makefile                    |  1 +
- arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 53 +++++++++++++++++++
- 2 files changed, 54 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -111,6 +111,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm47094-luxul-abr-4500.dtb \
- 	bcm47094-luxul-xap-1610.dtb \
- 	bcm47094-luxul-xbr-4500.dtb \
-+	bcm47094-luxul-xwc-2000.dtb \
- 	bcm47094-luxul-xwr-3100.dtb \
- 	bcm47094-luxul-xwr-3150-v1.dtb \
- 	bcm47094-netgear-r8500.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-@@ -0,0 +1,53 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Copyright 2019 Legrand AV Inc.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47094.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+	compatible = "luxul,xwc-2000-v1", "brcm,bcm47094", "brcm,bcm4708";
-+	model = "Luxul XWC-2000 V1";
-+
-+	chosen {
-+		bootargs = "earlycon";
-+	};
-+
-+	memory {
-+		reg = <0x00000000 0x08000000
-+		       0x88000000 0x18000000>;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		status	{
-+			label = "bcm53xx:green:status";
-+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "timer";
-+		};
-+	};
-+
-+	gpio-keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		restart {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&uart1 {
-+	status = "okay";
-+};
-+
-+&spi_nor {
-+	status = "okay";
-+};