diff options
Diffstat (limited to 'target/linux/bcm53xx/patches-4.14/033-v4.19-0003-ARM-dts-BCM5301X-Add-support-for-Linksys-EA9500.patch')
| -rw-r--r-- | target/linux/bcm53xx/patches-4.14/033-v4.19-0003-ARM-dts-BCM5301X-Add-support-for-Linksys-EA9500.patch | 269 |
1 files changed, 0 insertions, 269 deletions
diff --git a/target/linux/bcm53xx/patches-4.14/033-v4.19-0003-ARM-dts-BCM5301X-Add-support-for-Linksys-EA9500.patch b/target/linux/bcm53xx/patches-4.14/033-v4.19-0003-ARM-dts-BCM5301X-Add-support-for-Linksys-EA9500.patch deleted file mode 100644 index 701605a973..0000000000 --- a/target/linux/bcm53xx/patches-4.14/033-v4.19-0003-ARM-dts-BCM5301X-Add-support-for-Linksys-EA9500.patch +++ /dev/null @@ -1,269 +0,0 @@ -From 2bebdfcdcd0feb58d5df419532a2cedc78a336d7 Mon Sep 17 00:00:00 2001 -From: Vivek Unune <npcomplete13@gmail.com> -Date: Mon, 18 Jun 2018 13:41:59 -0400 -Subject: [PATCH] ARM: dts: BCM5301X: Add support for Linksys EA9500 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Hardware Info -------------- - -Processor - Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz -Switch - BCM53012 in BCM4709C0KFEBG & external BCM53125 -DDR3 RAM - 256 MB -Flash - 128 MB (Toshiba TC58BVG0S3HTA00) -2.4GHz - BCM4366 4×4 2.4/5G single chip 802.11ac SoC -Power Amp - Skyworks SE2623L 2.4 GHz power amp (x4) -5GHz x 2 - BCM4366 4×4 2.4/5G single chip 802.11ac SoC -Power Amp - PLX Technology PEX8603 3-lane, 3-port PCIe switch -Ports - 8 Ports, 1 WAN Ports -Antennas - 8 Antennas -Serial Port - @J6 [GND,TX,RX] (VCC NC) 115200 8n1 - -Tested with OpenWrt built with DSA driver and Kernel v4.14 - -Signed-off-by: Vivek Unune <npcomplete13@gmail.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 229 ++++++++++++++++++++++++ - 1 file changed, 229 insertions(+) - ---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -@@ -31,6 +31,235 @@ - linux,code = <KEY_WPS_BUTTON>; - gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - }; -+ -+ rfkill { -+ label = "WiFi"; -+ linux,code = <KEY_RFKILL>; -+ gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; -+ }; -+ -+ reset { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ wps { -+ label = "bcm53xx:white:wps"; -+ gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>; -+ }; -+ -+ usb2 { -+ label = "bcm53xx:green:usb2"; -+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; -+ trigger-sources = <&ohci_port2>, <&ehci_port2>; -+ linux,default-trigger = "usbport"; -+ }; -+ -+ usb3 { -+ label = "bcm53xx:green:usb3"; -+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; -+ trigger-sources = <&ohci_port1>, <&ehci_port1>, -+ <&xhci_port1>; -+ linux,default-trigger = "usbport"; -+ }; -+ -+ power { -+ label = "bcm53xx:white:power"; -+ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ wifi-disabled { -+ label = "bcm53xx:amber:wifi-disabled"; -+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; -+ }; -+ -+ wifi-enabled { -+ label = "bcm53xx:white:wifi-enabled"; -+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ bluebar1 { -+ label = "bcm53xx:white:bluebar1"; -+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ bluebar2 { -+ label = "bcm53xx:white:bluebar2"; -+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ bluebar3 { -+ label = "bcm53xx:white:bluebar3"; -+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; -+ }; -+ -+ bluebar4 { -+ label = "bcm53xx:white:bluebar4"; -+ gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ bluebar5 { -+ label = "bcm53xx:white:bluebar5"; -+ gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ bluebar6 { -+ label = "bcm53xx:white:bluebar6"; -+ gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ bluebar7 { -+ label = "bcm53xx:white:bluebar7"; -+ gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ bluebar8 { -+ label = "bcm53xx:white:bluebar8"; -+ gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+ -+ mdio-bus-mux { -+ /* BIT(9) = 1 => external mdio */ -+ mdio_ext: mdio@200 { -+ reg = <0x200>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ }; -+ -+ mdio-mii-mux { -+ compatible = "mdio-mux-mmioreg"; -+ mdio-parent-bus = <&mdio_ext>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x1800c1c0 0x4>; -+ -+ /* BIT(6) = mdc, BIT(7) = mdio */ -+ mux-mask = <0xc0>; -+ -+ mdio-mii@0 { -+ /* Enable MII function */ -+ reg = <0x0>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ switch@0 { -+ compatible = "brcm,bcm53125"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; -+ reset-names = "robo_reset"; -+ reg = <0>; -+ dsa,member = <1 0>; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ label = "lan1"; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ label = "lan5"; -+ }; -+ -+ port@2 { -+ reg = <2>; -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ reg = <3>; -+ label = "lan6"; -+ }; -+ -+ port@4 { -+ reg = <4>; -+ label = "lan3"; -+ }; -+ -+ sw1_p8: port@8 { -+ reg = <8>; -+ ethernet = <&sw0_p0>; -+ label = "cpu"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ }; -+ }; -+ }; -+ }; -+}; -+ -+&usb2 { -+ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>; -+}; -+ -+&usb3 { -+ vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>; -+}; -+ -+&srab { -+ compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab"; -+ status = "okay"; -+ dsa,member = <0 0>; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@1 { -+ reg = <1>; -+ label = "lan7"; -+ }; -+ -+ port@2 { -+ reg = <2>; -+ label = "lan4"; -+ }; -+ -+ port@3 { -+ reg = <3>; -+ label = "lan8"; -+ }; -+ -+ port@4 { -+ reg = <4>; -+ label = "wan"; -+ }; -+ -+ port@8 { -+ reg = <8>; -+ ethernet = <&gmac2>; -+ label = "cpu"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ sw0_p0: port@0 { -+ reg = <0>; -+ label = "extsw"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; - }; - }; - |