diff options
Diffstat (limited to 'target/linux/bcm53xx/patches-3.14/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch')
| -rw-r--r-- | target/linux/bcm53xx/patches-3.14/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch | 97 |
1 files changed, 97 insertions, 0 deletions
diff --git a/target/linux/bcm53xx/patches-3.14/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch b/target/linux/bcm53xx/patches-3.14/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch new file mode 100644 index 0000000000..daa641f20f --- /dev/null +++ b/target/linux/bcm53xx/patches-3.14/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch @@ -0,0 +1,97 @@ +From 0da909663566b34e0294ab0ff1ea08908164811e Mon Sep 17 00:00:00 2001 +From: Dan Haab <dhaab@luxul.com> +Date: Wed, 7 Jan 2015 14:34:50 -0700 +Subject: [PATCH 52/54] ARM: BCM5301X: Add DT for Luxul XWC-1000 + +Luxul XWC-1000 is a controller device based on BCM4708 SoC. The only +unusual thing in its DTS file is "ubi" partition on NAND flash. + +Signed-off-by: Dan Haab <dhaab@luxul.com> +Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 60 ++++++++++++++++++++++++++++ + 2 files changed, 61 insertions(+) + create mode 100644 arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index 91bd5bd..ff4a5ae 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -57,6 +57,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb + dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b-plus.dtb + dtb-$(CONFIG_ARCH_BCM_5301X) += \ + bcm4708-buffalo-wzr-1750dhp.dtb \ ++ bcm4708-luxul-xwc-1000.dtb \ + bcm4708-netgear-r6250.dtb \ + bcm4708-netgear-r6300-v2.dtb \ + bcm47081-asus-rt-n18u.dtb \ +diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +new file mode 100644 +index 0000000..946c728 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +@@ -0,0 +1,60 @@ ++/* ++ * Broadcom BCM470X / BCM5301X ARM platform code. ++ * DTS for Luxul XWC-1000 ++ * ++ * Copyright 2014 Luxul Inc. ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++/dts-v1/; ++ ++#include "bcm4708.dtsi" ++ ++/ { ++ compatible = "luxul,xwc-1000", "brcm,bcm4708"; ++ model = "Luxul XWC-1000 (BCM4708)"; ++ ++ chosen { ++ bootargs = "console=ttyS0,115200"; ++ }; ++ ++ memory { ++ reg = <0x00000000 0x08000000>; ++ }; ++ ++ axi@18000000 { ++ nand@28000 { ++ reg = <0x00028000 0x1000>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "ubi"; ++ reg = <0x00000000 0x08000000>; ++ }; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ status { ++ label = "bcm53xx:green:status"; ++ gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "timer"; ++ }; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ restart { ++ label = "Reset"; ++ linux,code = <KEY_RESTART>; ++ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++}; +-- +1.8.4.5 + |