diff options
Diffstat (limited to 'target/linux/bcm4908/patches-5.4/030-v5.11-0002-arm64-dts-broadcom-add-BCM4908-and-Asus-GT-AC5300-ea.patch')
-rw-r--r-- | target/linux/bcm4908/patches-5.4/030-v5.11-0002-arm64-dts-broadcom-add-BCM4908-and-Asus-GT-AC5300-ea.patch | 307 |
1 files changed, 0 insertions, 307 deletions
diff --git a/target/linux/bcm4908/patches-5.4/030-v5.11-0002-arm64-dts-broadcom-add-BCM4908-and-Asus-GT-AC5300-ea.patch b/target/linux/bcm4908/patches-5.4/030-v5.11-0002-arm64-dts-broadcom-add-BCM4908-and-Asus-GT-AC5300-ea.patch deleted file mode 100644 index 3598b5b9c7..0000000000 --- a/target/linux/bcm4908/patches-5.4/030-v5.11-0002-arm64-dts-broadcom-add-BCM4908-and-Asus-GT-AC5300-ea.patch +++ /dev/null @@ -1,307 +0,0 @@ -From 2961f69f151c0a6771f55cef46398fe49ca20902 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Thu, 12 Nov 2020 16:08:32 +0100 -Subject: [PATCH] arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early - DTS files -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -They don't descibe hardware fully yet but it's enough to boot a system. - -Some missing blocks: -1. PMC (Power Management Controller?) -2. Ethernet -3. Crypto -4. Thermal - -Asus DTS is missing defining full NAND partitions layout and buttons. - -Further changes will fill those gaps as soon as required bindings will -be found / tested / added. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm64/boot/dts/broadcom/Makefile | 1 + - arch/arm64/boot/dts/broadcom/bcm4908/Makefile | 2 + - .../bcm4908/bcm4908-asus-gt-ac5300.dts | 66 +++++++ - .../boot/dts/broadcom/bcm4908/bcm4908.dtsi | 187 ++++++++++++++++++ - 4 files changed, 256 insertions(+) - create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/Makefile - create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts - create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi - ---- a/arch/arm64/boot/dts/broadcom/Makefile -+++ b/arch/arm64/boot/dts/broadcom/Makefile -@@ -4,5 +4,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rp - bcm2837-rpi-3-b-plus.dtb \ - bcm2837-rpi-cm3-io3.dtb - -+subdir-y += bcm4908 - subdir-y += northstar2 - subdir-y += stingray ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile -@@ -0,0 +1,2 @@ -+# SPDX-License-Identifier: GPL-2.0 -+dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts -@@ -0,0 +1,66 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+ -+#include <dt-bindings/gpio/gpio.h> -+#include <dt-bindings/input/input.h> -+ -+#include "bcm4908.dtsi" -+ -+/ { -+ compatible = "asus,gt-ac5300", "brcm,bcm4908"; -+ model = "Asus GT-AC5300"; -+ -+ memory@0 { -+ device_type = "memory"; -+ reg = <0x00 0x00 0x00 0x40000000>; -+ }; -+ -+ gpio-keys-polled { -+ compatible = "gpio-keys-polled"; -+ poll-interval = <100>; -+ -+ wifi { -+ label = "WiFi"; -+ linux,code = <KEY_RFKILL>; -+ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; -+ }; -+ -+ wps { -+ label = "WPS"; -+ linux,code = <KEY_WPS_BUTTON>; -+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; -+ }; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; -+ }; -+ -+ brightness { -+ label = "LEDs"; -+ linux,code = <KEY_BRIGHTNESS_ZERO>; -+ gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; -+ -+&nandcs { -+ nand-ecc-strength = <4>; -+ nand-ecc-step-size = <512>; -+ nand-on-flash-bbt; -+ brcm,nand-has-wp; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "cferom"; -+ reg = <0x0 0x100000>; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi -@@ -0,0 +1,187 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+ -+#include <dt-bindings/interrupt-controller/irq.h> -+#include <dt-bindings/interrupt-controller/arm-gic.h> -+ -+/dts-v1/; -+ -+/ { -+ interrupt-parent = <&gic>; -+ -+ #address-cells = <2>; -+ #size-cells = <2>; -+ -+ aliases { -+ serial0 = &uart0; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ cpus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ cpu0: cpu@0 { -+ device_type = "cpu"; -+ compatible = "brcm,brahma-b53"; -+ reg = <0x0>; -+ next-level-cache = <&l2>; -+ }; -+ -+ cpu1: cpu@1 { -+ device_type = "cpu"; -+ compatible = "brcm,brahma-b53"; -+ reg = <0x1>; -+ enable-method = "spin-table"; -+ cpu-release-addr = <0x0 0xfff8>; -+ next-level-cache = <&l2>; -+ }; -+ -+ cpu2: cpu@2 { -+ device_type = "cpu"; -+ compatible = "brcm,brahma-b53"; -+ reg = <0x2>; -+ enable-method = "spin-table"; -+ cpu-release-addr = <0x0 0xfff8>; -+ next-level-cache = <&l2>; -+ }; -+ -+ cpu3: cpu@3 { -+ device_type = "cpu"; -+ compatible = "brcm,brahma-b53"; -+ reg = <0x3>; -+ enable-method = "spin-table"; -+ cpu-release-addr = <0x0 0xfff8>; -+ next-level-cache = <&l2>; -+ }; -+ -+ l2: l2-cache0 { -+ compatible = "cache"; -+ }; -+ }; -+ -+ axi@81000000 { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0x00 0x00 0x81000000 0x4000>; -+ -+ gic: interrupt-controller@1000 { -+ compatible = "arm,gic-400"; -+ #interrupt-cells = <3>; -+ #address-cells = <0>; -+ interrupt-controller; -+ reg = <0x1000 0x1000>, -+ <0x2000 0x2000>; -+ }; -+ }; -+ -+ timer { -+ compatible = "arm,armv8-timer"; -+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, -+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, -+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, -+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; -+ }; -+ -+ pmu { -+ compatible = "arm,cortex-a53-pmu"; -+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; -+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; -+ }; -+ -+ clocks { -+ periph_clk: periph_clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <50000000>; -+ clock-output-names = "periph"; -+ }; -+ }; -+ -+ soc { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0x00 0x00 0x80000000 0x10000>; -+ -+ usb@c300 { -+ compatible = "generic-ehci"; -+ reg = <0xc300 0x100>; -+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; -+ status = "disabled"; -+ }; -+ -+ usb@c400 { -+ compatible = "generic-ohci"; -+ reg = <0xc400 0x100>; -+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; -+ status = "disabled"; -+ }; -+ -+ usb@d000 { -+ compatible = "generic-xhci"; -+ reg = <0xd000 0x8c8>; -+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; -+ status = "disabled"; -+ }; -+ }; -+ -+ bus@ff800000 { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0x00 0x00 0xff800000 0x3000>; -+ -+ timer: timer@400 { -+ compatible = "brcm,bcm6328-timer", "syscon"; -+ reg = <0x400 0x3c>; -+ }; -+ -+ gpio0: gpio-controller@500 { -+ compatible = "brcm,bcm6345-gpio"; -+ reg-names = "dirout", "dat"; -+ reg = <0x500 0x28>, <0x528 0x28>; -+ -+ #gpio-cells = <2>; -+ gpio-controller; -+ }; -+ -+ uart0: serial@640 { -+ compatible = "brcm,bcm6345-uart"; -+ reg = <0x640 0x18>; -+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; -+ clocks = <&periph_clk>; -+ clock-names = "periph"; -+ status = "okay"; -+ }; -+ -+ nand@1800 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand"; -+ reg = <0x1800 0x600>, <0x2000 0x10>; -+ reg-names = "nand", "nand-int-base"; -+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; -+ interrupt-names = "nand"; -+ status = "okay"; -+ -+ nandcs: nandcs@0 { -+ compatible = "brcm,nandcs"; -+ reg = <0>; -+ }; -+ }; -+ -+ reboot { -+ compatible = "syscon-reboot"; -+ regmap = <&timer>; -+ offset = <0x34>; -+ mask = <1>; -+ }; -+ }; -+}; |