diff options
Diffstat (limited to 'target/linux/bcm47xx/base-files')
7 files changed, 571 insertions, 0 deletions
diff --git a/target/linux/bcm47xx/base-files/etc/board.d/01_network b/target/linux/bcm47xx/base-files/etc/board.d/01_network new file mode 100755 index 0000000000..e6311d8139 --- /dev/null +++ b/target/linux/bcm47xx/base-files/etc/board.d/01_network @@ -0,0 +1,206 @@ +#!/bin/sh /etc/rc.common +# Copyright (C) 2006-2015 OpenWrt.org + +. /lib/functions/system.sh +. /lib/functions/uci-defaults.sh + +configure_by_vlanports() { + local vlan0ports="$(nvram get vlan0ports)" + local vlan1ports="$(nvram get vlan1ports)" + local vlan2ports="$(nvram get vlan2ports)" + local cpuport="$(swconfig dev switch0 help 2>/dev/null | sed -ne "s|.*cpu @ \([0-9]*\).*|\1|p")" + + if [ "${vlan0ports:0:9}" = "0 1 2 3 8" -a "${vlan1ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ] || \ + [ "${vlan1ports:0:9}" = "0 1 2 3 8" -a "${vlan2ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ] || \ + [ "${vlan2ports:0:9}" = "0 1 2 3 8" -a "${vlan1ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ]; + then + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0" + + elif [ "${vlan0ports:0:9}" = "1 2 3 4 8" -a "${vlan1ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ] || \ + [ "${vlan1ports:0:9}" = "1 2 3 4 8" -a "${vlan2ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ] || \ + [ "${vlan2ports:0:9}" = "1 2 3 4 8" -a "${vlan1ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ]; + then + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "8@eth0" + + elif [ "${vlan0ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \ + [ "${vlan1ports:0:9}" = "0 1 2 3 5" -a "${vlan2ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \ + [ "${vlan2ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ]; + then + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" + + elif [ "${vlan0ports:0:9}" = "1 2 3 4 5" -a "${vlan1ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ] || \ + [ "${vlan1ports:0:9}" = "1 2 3 4 5" -a "${vlan2ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ] || \ + [ "${vlan2ports:0:9}" = "1 2 3 4 5" -a "${vlan1ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ]; + then + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0" + + else + logger -t "01_network" "Unable to determine network configuration" + ucidef_set_interface_lan "eth0" + fi +} + +configure_by_boardnum() { + local boardnum="$1" + + case "$boardnum" in + # WAP54G, Sitecom WL-105b + "2" | \ + "1024") + ucidef_set_interface_lan "eth0" + ;; + + # Generic detection fallback + *) + configure_by_vlanports + ;; + esac +} + +configure_by_boardtype() { + local boardtype="$1" + local boardnum="$2" + + case "$boardtype" in + "bcm94710r4") + ucidef_set_interfaces_lan_wan "eth0" "eth1" + ;; + + "0x0467") + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" + ;; + + "0x042f" | \ + "0x0472") + # WL-500gP + if [ "$boardnum" = "45" ]; then + ucidef_add_switch "switch0" \ + "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0" + + # Generic BCM94704 + else + ucidef_set_interface_wan "eth1" + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0" + + # MAC addresses on 4704 tend to be screwed up. Add a workaround here + local mac="$(nvram get et0macaddr)" + local pat="[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]" + pat="$pat:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]" + pat="$pat:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]" + + case "$mac" in + $pat) + ucidef_set_interface_macaddr "lan" "$mac" + ucidef_set_interface_macaddr "wan" "$(macaddr_add "$mac" 1)" + ;; + esac + fi + ;; + + # Buffalo WBR-B11 and Buffalo WBR-G54 + "bcm94710ap") + ucidef_set_interface_wan "eth1" + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0" + ;; + + *) + configure_by_boardnum "$boardnum" + ;; + esac +} + +configure_by_model() { + local model="$1" + local boardtype="$2" + local boardnum="$3" + + # Netgear WGT634U exception + if grep -sqE 'mtd0: 000(6|a)0000' /proc/mtd; then + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" + return + fi + + case "$model" in + "Asus WLHDD" | \ + "Asus WL300G") + ucidef_set_interface_lan "eth1" + ;; + + "Asus WL330GE") + ucidef_add_switch "switch0" "4:lan" "5t@eth0" + ;; + + "Asus WL500G" | \ + "Microsoft MN-700") + ucidef_set_interfaces_lan_wan "eth0" "eth1" + ;; + + "Asus WL500GP V2") + ucidef_add_switch "switch0" \ + "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "5@eth0" + ;; + + "Asus RT-N12"* | \ + "Buffalo WHR-G125" | \ + "D-Link DIR-330" | \ + "Motorola WR850G" | \ + "Siemens SE505 V2") + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" + ;; + + "Asus WL700") + ucidef_add_switch "switch0" \ + "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0" + ;; + + "Asus WL500W" | \ + "Dell TrueMobile 2300") + ucidef_set_interface_wan "eth1" + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0" + ;; + + "Asus RT-N16"* | \ + "Linksys E3000 V1" | \ + "Netgear WNR3500 V2" | \ + "Netgear WNR3500L") + ucidef_add_switch "switch0" \ + "0:wan" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "8@eth0" + ;; + + "Netgear WN2500RP V1") + ucidef_add_switch "switch0" \ + "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth0" + ;; + + *) + configure_by_boardtype "$boardtype" "$boardnum" + ;; + esac +} + + +model="$(cat /tmp/sysinfo/model)" +boardtype="$(board_name)" + +case "$boardtype" in + *:*) + boardnum="${boardtype##*:}" + boardtype="${boardtype%:*}" + ;; +esac + +board_config_update + +configure_by_model "$model" "$boardtype" "$boardnum" + +board_config_flush diff --git a/target/linux/bcm47xx/base-files/etc/diag.sh b/target/linux/bcm47xx/base-files/etc/diag.sh new file mode 100644 index 0000000000..91cf4bdf4b --- /dev/null +++ b/target/linux/bcm47xx/base-files/etc/diag.sh @@ -0,0 +1,33 @@ +#!/bin/sh +# Copyright (C) 2006 OpenWrt.org + +. /lib/functions/leds.sh + +get_status_led() { + for led in dmz power diag wps; do + status_led_file=$(find /sys/class/leds/ -name "*${led}*" | head -n1) + if [ ! -f $status_led_file ]; then + status_led=$(basename $status_led_file) + return + fi; + done +} + +set_state() { + get_status_led + + case "$1" in + preinit) + status_led_blink_preinit + ;; + failsafe) + status_led_blink_failsafe + ;; + preinit_regular) + status_led_blink_preinit_regular + ;; + done) + status_led_on + ;; + esac +} diff --git a/target/linux/bcm47xx/base-files/etc/init.d/wmacfixup b/target/linux/bcm47xx/base-files/etc/init.d/wmacfixup new file mode 100755 index 0000000000..ee1b752201 --- /dev/null +++ b/target/linux/bcm47xx/base-files/etc/init.d/wmacfixup @@ -0,0 +1,33 @@ +#!/bin/sh /etc/rc.common +# Copyright (C) 2010 OpenWrt.org + +START=41 + +boot() { + [ -d /sys/class/ieee80211 ] || exit + + commit=0 + + fixup_wmac() { + local cfg="$1" + local cfmac + + config_get cfmac "$cfg" macaddr + + [ "$cfmac" != "00:90:4c:5f:00:2a" ] || { + local nvmac="$(nvram get il0macaddr 2>/dev/null)" + [ -n "$nvmac" ] && [ "$nvmac != "$cfmac ] && { + uci set wireless.$cfg.macaddr="$nvmac" + commit=1 + } + } + } + + config_load wireless + config_foreach fixup_wmac wifi-device + + [ "$commit" = 1 ] && uci commit wireless +} + +start() { :; } +stop() { :; } diff --git a/target/linux/bcm47xx/base-files/etc/uci-defaults/03_network_migration b/target/linux/bcm47xx/base-files/etc/uci-defaults/03_network_migration new file mode 100644 index 0000000000..e430b41d48 --- /dev/null +++ b/target/linux/bcm47xx/base-files/etc/uci-defaults/03_network_migration @@ -0,0 +1,29 @@ +#!/bin/sh +# +# Copyright (C) 2014-2015 OpenWrt.org +# + +uci show network | grep "\.vlan=0" +[ $? -ne 0 ] && exit 0 + +logger -t network "network config is invalid, creating new one" + +lan_proto="$(uci -q get network.lan.proto)" +lan_ipaddr="$(uci -q get network.lan.ipaddr)" +lan_netmask="$(uci -q get network.lan.netmask)" +wan_proto="$(uci -q get network.wan.proto)" +wan_ipaddr="$(uci -q get network.wan.ipaddr)" +wan_netmask="$(uci -q get network.wan.netmask)" + +echo "" > /etc/config/network +config_generate + +uci set network.lan.proto=$lan_proto +uci set network.lan.ipaddr=$lan_ipaddr +uci set network.lan.netmask=$lan_netmask +uci set network.wan.proto=$wan_proto +uci set network.wan.ipaddr=$wan_ipaddr +uci set network.wan.netmask=$wan_netmask +uci commit network + +exit 0 diff --git a/target/linux/bcm47xx/base-files/etc/uci-defaults/09_fix_crc b/target/linux/bcm47xx/base-files/etc/uci-defaults/09_fix_crc new file mode 100644 index 0000000000..346a532998 --- /dev/null +++ b/target/linux/bcm47xx/base-files/etc/uci-defaults/09_fix_crc @@ -0,0 +1,7 @@ +#!/bin/sh +# +# Copyright (C) 2007 OpenWrt.org +# +# + +mtd fixtrx firmware diff --git a/target/linux/bcm47xx/base-files/lib/preinit/01_sysinfo b/target/linux/bcm47xx/base-files/lib/preinit/01_sysinfo new file mode 100644 index 0000000000..8c7bd399da --- /dev/null +++ b/target/linux/bcm47xx/base-files/lib/preinit/01_sysinfo @@ -0,0 +1,16 @@ +#!/bin/sh + +do_sysinfo_bcm47xx() { + local boardtype="$(nvram get boardtype)" + local boardnum="$(nvram get boardnum)" + local model="$(sed -ne 's/^machine[ \t]*: //p' /proc/cpuinfo)" + + [ -z "$model" ] && model="unknown" + [ -z "$boardtype" ] && boardtype="unknown" + + [ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/" + echo "$boardtype${boardnum:+:$boardnum}" > /tmp/sysinfo/board_name + echo "$model" > /tmp/sysinfo/model +} + +boot_hook_add preinit_main do_sysinfo_bcm47xx diff --git a/target/linux/bcm47xx/base-files/lib/upgrade/platform.sh b/target/linux/bcm47xx/base-files/lib/upgrade/platform.sh new file mode 100644 index 0000000000..45815d9fe2 --- /dev/null +++ b/target/linux/bcm47xx/base-files/lib/upgrade/platform.sh @@ -0,0 +1,247 @@ +PART_NAME=firmware + +LXL_FLAGS_VENDOR_LUXUL=0x00000001 + +# $(1): file to read magic from +# $(2): offset in bytes +get_magic_long_at() { + dd if="$1" skip=$2 bs=1 count=4 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' +} + +# $(1): file to read LE long number from +# $(2): offset in bytes +get_le_long_at() { + echo $((0x$(dd if="$1" skip=$2 bs=1 count=4 2>/dev/null | hexdump -v -e '1/4 "%02x"'))) +} + +platform_expected_image() { + local model="$(cat /tmp/sysinfo/model)" + + case "$model" in + "Netgear WGR614 V8") echo "chk U12H072T00_NETGEAR"; return;; + "Netgear WGR614 V9") echo "chk U12H094T00_NETGEAR"; return;; + "Netgear WGR614 V10") echo "chk U12H139T01_NETGEAR"; return;; + "Netgear WN2500RP V1") echo "chk U12H197T00_NETGEAR"; return;; + "Netgear WN2500RP V2") echo "chk U12H294T00_NETGEAR"; return;; + "Netgear WNDR3300") echo "chk U12H093T00_NETGEAR"; return;; + "Netgear WNDR3400 V1") echo "chk U12H155T00_NETGEAR"; return;; + "Netgear WNDR3400 V2") echo "chk U12H187T00_NETGEAR"; return;; + "Netgear WNDR3400 V3") echo "chk U12H208T00_NETGEAR"; return;; + "Netgear WNDR3400 Vcna") echo "chk U12H155T01_NETGEAR"; return;; + "Netgear WNDR3700 V3") echo "chk U12H194T00_NETGEAR"; return;; + "Netgear WNDR4000") echo "chk U12H181T00_NETGEAR"; return;; + "Netgear WNDR4500 V1") echo "chk U12H189T00_NETGEAR"; return;; + "Netgear WNDR4500 V2") echo "chk U12H224T00_NETGEAR"; return;; + "Netgear WNR2000 V2") echo "chk U12H114T00_NETGEAR"; return;; + "Netgear WNR3500L") echo "chk U12H136T99_NETGEAR"; return;; + "Netgear WNR3500U") echo "chk U12H136T00_NETGEAR"; return;; + "Netgear WNR3500 V2") echo "chk U12H127T00_NETGEAR"; return;; + "Netgear WNR3500 V2vc") echo "chk U12H127T70_NETGEAR"; return;; + "Netgear WNR834B V2") echo "chk U12H081T00_NETGEAR"; return;; + "Linksys E900 V1") echo "cybertan E900"; return;; + "Linksys E1000 V1") echo "cybertan E100"; return;; + "Linksys E1000 V2") echo "cybertan E100"; return;; + "Linksys E1000 V2.1") echo "cybertan E100"; return;; + "Linksys E1200 V2") echo "cybertan E122"; return;; + "Linksys E2000 V1") echo "cybertan 32XN"; return;; + "Linksys E3000 V1") echo "cybertan 61XN"; return;; + "Linksys E3200 V1") echo "cybertan 3200"; return;; + "Linksys E4200 V1") echo "cybertan 4200"; return;; + "Linksys WRT150N V1.1") echo "cybertan N150"; return;; + "Linksys WRT150N V1") echo "cybertan N150"; return;; + "Linksys WRT160N V1") echo "cybertan N150"; return;; + "Linksys WRT160N V3") echo "cybertan N150"; return;; + "Linksys WRT300N V1") echo "cybertan EWCB"; return;; + "Linksys WRT300N V1.1") echo "cybertan EWC2"; return;; + "Linksys WRT310N V1") echo "cybertan 310N"; return;; + "Linksys WRT310N V2") echo "cybertan 310N"; return;; + "Linksys WRT610N V1") echo "cybertan 610N"; return;; + "Linksys WRT610N V2") echo "cybertan 610N"; return;; + "Luxul XAP-310 V1") echo "lxl XAP-310"; return;; + "Luxul XAP-1210 V1") echo "lxl XAP-1210"; return;; + "Luxul XAP-1230 V1") echo "lxl XAP-1230"; return;; + "Luxul XAP-1240 V1") echo "lxl XAP-1240"; return;; + "Luxul XAP-1500 V1") echo "lxl XAP-1500"; return;; + "Luxul ABR-4400 V1") echo "lxl ABR-4400"; return;; + "Luxul XBR-4400 V1") echo "lxl XBR-4400"; return;; + "Luxul XVW-P30 V1") echo "lxl XVW-P30"; return;; + "Luxul XWR-600 V1") echo "lxl XWR-600"; return;; + "Luxul XWR-1750 V1") echo "lxl XWR-1750"; return;; + esac +} + +bcm47xx_identify() { + local magic + + magic=$(get_magic_long "$1") + case "$magic" in + "48445230") + echo "trx" + return + ;; + "2a23245e") + echo "chk" + return + ;; + "4c584c23") + echo "lxl" + return + ;; + esac + + magic=$(get_magic_long_at "$1" 14) + [ "$magic" = "55324e44" ] && { + echo "cybertan" + return + } + + magic=$(get_magic_long_at "$1" 60) + [ "$magic" = "4c584c23" ] && { + echo "lxlold" + return + } + + echo "unknown" +} + +platform_check_image() { + [ "$#" -gt 1 ] && return 1 + + local file_type=$(bcm47xx_identify "$1") + local magic + local error=0 + + case "$file_type" in + "chk") + local header_len=$((0x$(get_magic_long_at "$1" 4))) + local board_id_len=$(($header_len - 40)) + local board_id=$(dd if="$1" skip=40 bs=1 count=$board_id_len 2>/dev/null | hexdump -v -e '1/1 "%c"') + local dev_board_id=$(platform_expected_image) + echo "Found CHK image with device board_id $board_id" + + [ -n "$dev_board_id" -a "chk $board_id" != "$dev_board_id" ] && { + echo "Firmware board_id doesn't match device board_id ($dev_board_id)" + error=1 + } + + if ! otrx check "$1" -o "$header_len"; then + echo "No valid TRX firmware in the CHK image" + notify_firmware_test_result "trx_valid" 0 + error=1 + else + notify_firmware_test_result "trx_valid" 1 + fi + ;; + "cybertan") + local pattern=$(dd if="$1" bs=1 count=4 2>/dev/null | hexdump -v -e '1/1 "%c"') + local dev_pattern=$(platform_expected_image) + echo "Found CyberTAN image with device pattern: $pattern" + + [ -n "$dev_pattern" -a "cybertan $pattern" != "$dev_pattern" ] && { + echo "Firmware pattern doesn't match device pattern ($dev_pattern)" + error=1 + } + + if ! otrx check "$1" -o 32; then + echo "No valid TRX firmware in the CyberTAN image" + notify_firmware_test_result "trx_valid" 0 + error=1 + else + notify_firmware_test_result "trx_valid" 1 + fi + ;; + "lxl") + local hdr_len=$(get_le_long_at "$1" 8) + local flags=$(get_le_long_at "$1" 12) + local board=$(dd if="$1" skip=16 bs=1 count=16 2>/dev/null | hexdump -v -e '1/1 "%c"') + local dev_board=$(platform_expected_image) + echo "Found Luxul image for board $board" + + [ -n "$dev_board" -a "lxl $board" != "$dev_board" ] && { + echo "Firmware ($board) doesn't match device ($dev_board)" + error=1 + } + + [ $((flags & LXL_FLAGS_VENDOR_LUXUL)) -gt 0 ] && notify_firmware_no_backup + + if ! otrx check "$1" -o "$hdr_len"; then + echo "No valid TRX firmware in the Luxul image" + notify_firmware_test_result "trx_valid" 0 + error=1 + else + notify_firmware_test_result "trx_valid" 1 + fi + ;; + "lxlold") + local board_id=$(dd if="$1" skip=48 bs=1 count=12 2>/dev/null | hexdump -v -e '1/1 "%c"') + local dev_board_id=$(platform_expected_image) + echo "Found Luxul image with device board_id $board_id" + + [ -n "$dev_board_id" -a "lxl $board_id" != "$dev_board_id" ] && { + echo "Firmware board_id doesn't match device board_id ($dev_board_id)" + error=1 + } + + notify_firmware_no_backup + + if ! otrx check "$1" -o 64; then + echo "No valid TRX firmware in the Luxul image" + notify_firmware_test_result "trx_valid" 0 + error=1 + else + notify_firmware_test_result "trx_valid" 1 + fi + ;; + "trx") + if ! otrx check "$1"; then + echo "Invalid (corrupted?) TRX firmware" + notify_firmware_test_result "trx_valid" 0 + error=1 + else + notify_firmware_test_result "trx_valid" 1 + fi + ;; + *) + echo "Invalid image type. Please use firmware specific for this device." + notify_firmware_broken + error=1 + ;; + esac + + return $error +} + +platform_trx_from_chk_cmd() { + local header_len=$((0x$(get_magic_long_at "$1" 4))) + + echo -n dd bs=$header_len skip=1 +} + +platform_trx_from_cybertan_cmd() { + echo -n dd bs=32 skip=1 +} + +platform_trx_from_lxl_cmd() { + local hdr_len=$(get_le_long_at "$1" 8) + + echo -n dd skip=$hdr_len iflag=skip_bytes +} + +platform_trx_from_lxlold_cmd() { + echo -n dd bs=64 skip=1 +} + +platform_do_upgrade() { + local file_type=$(bcm47xx_identify "$1") + local trx="$1" + local cmd="" + + case "$file_type" in + "chk") cmd=$(platform_trx_from_chk_cmd "$trx");; + "cybertan") cmd=$(platform_trx_from_cybertan_cmd "$trx");; + "lxl") cmd=$(platform_trx_from_lxl_cmd "$trx");; + "lxlold") cmd=$(platform_trx_from_lxlold_cmd "$trx");; + esac + + default_do_upgrade "$trx" "$cmd" +} |