diff options
Diffstat (limited to 'target/linux/bcm27xx')
16 files changed, 0 insertions, 5062 deletions
diff --git a/target/linux/bcm27xx/patches-5.10/950-0542-net-usb-r8152-Provide-missing-documentation-for-some.patch b/target/linux/bcm27xx/patches-5.10/950-0542-net-usb-r8152-Provide-missing-documentation-for-some.patch deleted file mode 100644 index bec2867a48..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0542-net-usb-r8152-Provide-missing-documentation-for-some.patch +++ /dev/null @@ -1,72 +0,0 @@ -From 586f04ce6a391419ca3cc9cef6b6f38570cede88 Mon Sep 17 00:00:00 2001 -From: Lee Jones <lee.jones@linaro.org> -Date: Mon, 2 Nov 2020 11:45:04 +0000 -Subject: [PATCH] net: usb: r8152: Provide missing documentation for - some struct members - -commit 34e653efb602e0651867fb5ab14369b555a61dcd upstream. - -Fixes the following W=1 kernel build warning(s): - - drivers/net/usb/r8152.c:934: warning: Function parameter or member 'blk_hdr' not described in 'fw_mac' - drivers/net/usb/r8152.c:934: warning: Function parameter or member 'reserved' not described in 'fw_mac' - drivers/net/usb/r8152.c:947: warning: Function parameter or member 'blk_hdr' not described in 'fw_phy_patch_key' - drivers/net/usb/r8152.c:947: warning: Function parameter or member 'reserved' not described in 'fw_phy_patch_key' - drivers/net/usb/r8152.c:986: warning: Function parameter or member 'blk_hdr' not described in 'fw_phy_nc' - drivers/net/usb/r8152.c:986: warning: Function parameter or member 'mode_pre' not described in 'fw_phy_nc' - drivers/net/usb/r8152.c:986: warning: Function parameter or member 'mode_post' not described in 'fw_phy_nc' - drivers/net/usb/r8152.c:986: warning: Function parameter or member 'reserved' not described in 'fw_phy_nc' - -Signed-off-by: Lee Jones <lee.jones@linaro.org> -Acked-by: Hayes Wang <hayeswang@realtek.com> -Link: https://lore.kernel.org/r/20201102114512.1062724-23-lee.jones@linaro.org -Signed-off-by: Jakub Kicinski <kuba@kernel.org> ---- - drivers/net/usb/r8152.c | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/drivers/net/usb/r8152.c -+++ b/drivers/net/usb/r8152.c -@@ -899,6 +899,7 @@ struct fw_header { - * struct fw_mac - a firmware block used by RTL_FW_PLA and RTL_FW_USB. - * The layout of the firmware block is: - * <struct fw_mac> + <info> + <firmware data>. -+ * @blk_hdr: firmware descriptor (type, length) - * @fw_offset: offset of the firmware binary data. The start address of - * the data would be the address of struct fw_mac + @fw_offset. - * @fw_reg: the register to load the firmware. Depends on chip. -@@ -912,6 +913,7 @@ struct fw_header { - * @bp_num: the break point number which needs to be set for this firmware. - * Depends on the firmware. - * @bp: break points. Depends on firmware. -+ * @reserved: reserved space (unused) - * @fw_ver_reg: the register to store the fw version. - * @fw_ver_data: the firmware version of the current type. - * @info: additional information for debugging, and is followed by the -@@ -937,8 +939,10 @@ struct fw_mac { - /** - * struct fw_phy_patch_key - a firmware block used by RTL_FW_PHY_START. - * This is used to set patch key when loading the firmware of PHY. -+ * @blk_hdr: firmware descriptor (type, length) - * @key_reg: the register to write the patch key. - * @key_data: patch key. -+ * @reserved: reserved space (unused) - */ - struct fw_phy_patch_key { - struct fw_block blk_hdr; -@@ -951,6 +955,7 @@ struct fw_phy_patch_key { - * struct fw_phy_nc - a firmware block used by RTL_FW_PHY_NC. - * The layout of the firmware block is: - * <struct fw_phy_nc> + <info> + <firmware data>. -+ * @blk_hdr: firmware descriptor (type, length) - * @fw_offset: offset of the firmware binary data. The start address of - * the data would be the address of struct fw_phy_nc + @fw_offset. - * @fw_reg: the register to load the firmware. Depends on chip. -@@ -961,6 +966,7 @@ struct fw_phy_patch_key { - * @mode_reg: the regitster of switching the mode. - * @mod_pre: the mode needing to be set before loading the firmware. - * @mod_post: the mode to be set when finishing to load the firmware. -+ * @reserved: reserved space (unused) - * @bp_start: the start register of break points. Depends on chip. - * @bp_num: the break point number which needs to be set for this firmware. - * Depends on the firmware. diff --git a/target/linux/bcm27xx/patches-5.10/950-0543-net-usb-r8152-Fix-a-couple-of-spelling-errors-in-fw_.patch b/target/linux/bcm27xx/patches-5.10/950-0543-net-usb-r8152-Fix-a-couple-of-spelling-errors-in-fw_.patch deleted file mode 100644 index aa2763e7de..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0543-net-usb-r8152-Fix-a-couple-of-spelling-errors-in-fw_.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 5fcfa846181de6676509696c4cd7b60a22e74077 Mon Sep 17 00:00:00 2001 -From: Lee Jones <lee.jones@linaro.org> -Date: Mon, 2 Nov 2020 11:45:09 +0000 -Subject: [PATCH] net: usb: r8152: Fix a couple of spelling errors in - fw_phy_nc's docs - -commit 9f07814d01ad085b2d9f1d55b4ce532fb2c27110 upstream. - -Fixes the following W=1 kernel build warning(s): - - drivers/net/usb/r8152.c:992: warning: Function parameter or member 'mode_pre' not described in 'fw_phy_nc' - drivers/net/usb/r8152.c:992: warning: Function parameter or member 'mode_post' not described in 'fw_phy_nc' - -Signed-off-by: Lee Jones <lee.jones@linaro.org> -Acked-by: Hayes Wang <hayeswang@realtek.com> -Link: https://lore.kernel.org/r/20201102114512.1062724-28-lee.jones@linaro.org -Signed-off-by: Jakub Kicinski <kuba@kernel.org> ---- - drivers/net/usb/r8152.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/net/usb/r8152.c -+++ b/drivers/net/usb/r8152.c -@@ -964,8 +964,8 @@ struct fw_phy_patch_key { - * @patch_en_addr: the register of enabling patch mode. Depends on chip. - * @patch_en_value: patch mode enabled mask. Depends on the firmware. - * @mode_reg: the regitster of switching the mode. -- * @mod_pre: the mode needing to be set before loading the firmware. -- * @mod_post: the mode to be set when finishing to load the firmware. -+ * @mode_pre: the mode needing to be set before loading the firmware. -+ * @mode_post: the mode to be set when finishing to load the firmware. - * @reserved: reserved space (unused) - * @bp_start: the start register of break points. Depends on chip. - * @bp_num: the break point number which needs to be set for this firmware. diff --git a/target/linux/bcm27xx/patches-5.10/950-0544-net-usb-r8153_ecm-support-ECM-mode-for-RTL8153.patch b/target/linux/bcm27xx/patches-5.10/950-0544-net-usb-r8153_ecm-support-ECM-mode-for-RTL8153.patch deleted file mode 100644 index 789de8e6fd..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0544-net-usb-r8153_ecm-support-ECM-mode-for-RTL8153.patch +++ /dev/null @@ -1,320 +0,0 @@ -From 0ef50460f7f053bd2a911ec53e01bfda646a5574 Mon Sep 17 00:00:00 2001 -From: Hayes Wang <hayeswang@realtek.com> -Date: Wed, 4 Nov 2020 10:19:22 +0800 -Subject: [PATCH] net/usb/r8153_ecm: support ECM mode for RTL8153 - -commit c1aedf015ebdd0232757a66e2daccf1246bd609c upstream. - -Support ECM mode based on cdc_ether with relative mii functions, -when CONFIG_USB_RTL8152 is not set, or the device is not supported -by r8152 driver. - -Both r8152 and r8153_ecm would check the return value of -rtl8152_get_version() in porbe(). If rtl8152_get_version() -return none zero value, the r8152 is used for the device -with vendor mode. Otherwise, the r8153_ecm is used for the -device with ECM mode. - -Signed-off-by: Hayes Wang <hayeswang@realtek.com> -Link: https://lore.kernel.org/r/1394712342-15778-392-Taiwan-albertk@realtek.com -Signed-off-by: Jakub Kicinski <kuba@kernel.org> ---- - drivers/net/usb/Makefile | 2 +- - drivers/net/usb/r8152.c | 30 +------ - drivers/net/usb/r8153_ecm.c | 162 ++++++++++++++++++++++++++++++++++++ - include/linux/usb/r8152.h | 37 ++++++++ - 4 files changed, 204 insertions(+), 27 deletions(-) - create mode 100644 drivers/net/usb/r8153_ecm.c - create mode 100644 include/linux/usb/r8152.h - ---- a/drivers/net/usb/Makefile -+++ b/drivers/net/usb/Makefile -@@ -13,7 +13,7 @@ obj-$(CONFIG_USB_LAN78XX) += lan78xx.o - obj-$(CONFIG_USB_NET_AX8817X) += asix.o - asix-y := asix_devices.o asix_common.o ax88172a.o - obj-$(CONFIG_USB_NET_AX88179_178A) += ax88179_178a.o --obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o -+obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o r8153_ecm.o - obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o - obj-$(CONFIG_USB_NET_DM9601) += dm9601.o - obj-$(CONFIG_USB_NET_SR9700) += sr9700.o ---- a/drivers/net/usb/r8152.c -+++ b/drivers/net/usb/r8152.c -@@ -27,6 +27,7 @@ - #include <linux/acpi.h> - #include <linux/firmware.h> - #include <crypto/hash.h> -+#include <linux/usb/r8152.h> - - /* Information for net-next */ - #define NETNEXT_VERSION "11" -@@ -654,18 +655,6 @@ enum rtl_register_content { - - #define INTR_LINK 0x0004 - --#define RTL8152_REQT_READ 0xc0 --#define RTL8152_REQT_WRITE 0x40 --#define RTL8152_REQ_GET_REGS 0x05 --#define RTL8152_REQ_SET_REGS 0x05 -- --#define BYTE_EN_DWORD 0xff --#define BYTE_EN_WORD 0x33 --#define BYTE_EN_BYTE 0x11 --#define BYTE_EN_SIX_BYTES 0x3f --#define BYTE_EN_START_MASK 0x0f --#define BYTE_EN_END_MASK 0xf0 -- - #define RTL8153_MAX_PACKET 9216 /* 9K */ - #define RTL8153_MAX_MTU (RTL8153_MAX_PACKET - VLAN_ETH_HLEN - \ - ETH_FCS_LEN) -@@ -690,21 +679,9 @@ enum rtl8152_flags { - LENOVO_MACPASSTHRU, - }; - --/* Define these values to match your device */ --#define VENDOR_ID_REALTEK 0x0bda --#define VENDOR_ID_MICROSOFT 0x045e --#define VENDOR_ID_SAMSUNG 0x04e8 --#define VENDOR_ID_LENOVO 0x17ef --#define VENDOR_ID_LINKSYS 0x13b1 --#define VENDOR_ID_NVIDIA 0x0955 --#define VENDOR_ID_TPLINK 0x2357 -- - #define DEVICE_ID_THINKPAD_THUNDERBOLT3_DOCK_GEN2 0x3082 - #define DEVICE_ID_THINKPAD_USB_C_DOCK_GEN2 0xa387 - --#define MCU_TYPE_PLA 0x0100 --#define MCU_TYPE_USB 0x0000 -- - struct tally_counter { - __le64 tx_packets; - __le64 rx_packets; -@@ -6625,7 +6602,7 @@ static int rtl_fw_init(struct r8152 *tp) - return 0; - } - --static u8 rtl_get_version(struct usb_interface *intf) -+u8 rtl8152_get_version(struct usb_interface *intf) - { - struct usb_device *udev = interface_to_usbdev(intf); - u32 ocp_data = 0; -@@ -6683,12 +6660,13 @@ static u8 rtl_get_version(struct usb_int - - return version; - } -+EXPORT_SYMBOL_GPL(rtl8152_get_version); - - static int rtl8152_probe(struct usb_interface *intf, - const struct usb_device_id *id) - { - struct usb_device *udev = interface_to_usbdev(intf); -- u8 version = rtl_get_version(intf); -+ u8 version = rtl8152_get_version(intf); - struct r8152 *tp; - struct net_device *netdev; - int ret; ---- /dev/null -+++ b/drivers/net/usb/r8153_ecm.c -@@ -0,0 +1,162 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later -+#include <linux/module.h> -+#include <linux/netdevice.h> -+#include <linux/mii.h> -+#include <linux/usb.h> -+#include <linux/usb/cdc.h> -+#include <linux/usb/usbnet.h> -+#include <linux/usb/r8152.h> -+ -+#define OCP_BASE 0xe86c -+ -+static int pla_read_word(struct usbnet *dev, u16 index) -+{ -+ u16 byen = BYTE_EN_WORD; -+ u8 shift = index & 2; -+ __le32 tmp; -+ int ret; -+ -+ if (shift) -+ byen <<= shift; -+ -+ index &= ~3; -+ -+ ret = usbnet_read_cmd(dev, RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, index, -+ MCU_TYPE_PLA | byen, &tmp, sizeof(tmp)); -+ if (ret < 0) -+ goto out; -+ -+ ret = __le32_to_cpu(tmp); -+ ret >>= (shift * 8); -+ ret &= 0xffff; -+ -+out: -+ return ret; -+} -+ -+static int pla_write_word(struct usbnet *dev, u16 index, u32 data) -+{ -+ u32 mask = 0xffff; -+ u16 byen = BYTE_EN_WORD; -+ u8 shift = index & 2; -+ __le32 tmp; -+ int ret; -+ -+ data &= mask; -+ -+ if (shift) { -+ byen <<= shift; -+ mask <<= (shift * 8); -+ data <<= (shift * 8); -+ } -+ -+ index &= ~3; -+ -+ ret = usbnet_read_cmd(dev, RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, index, -+ MCU_TYPE_PLA | byen, &tmp, sizeof(tmp)); -+ -+ if (ret < 0) -+ goto out; -+ -+ data |= __le32_to_cpu(tmp) & ~mask; -+ tmp = __cpu_to_le32(data); -+ -+ ret = usbnet_write_cmd(dev, RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE, index, -+ MCU_TYPE_PLA | byen, &tmp, sizeof(tmp)); -+ -+out: -+ return ret; -+} -+ -+static int r8153_ecm_mdio_read(struct net_device *netdev, int phy_id, int reg) -+{ -+ struct usbnet *dev = netdev_priv(netdev); -+ int ret; -+ -+ ret = pla_write_word(dev, OCP_BASE, 0xa000); -+ if (ret < 0) -+ goto out; -+ -+ ret = pla_read_word(dev, 0xb400 + reg * 2); -+ -+out: -+ return ret; -+} -+ -+static void r8153_ecm_mdio_write(struct net_device *netdev, int phy_id, int reg, int val) -+{ -+ struct usbnet *dev = netdev_priv(netdev); -+ int ret; -+ -+ ret = pla_write_word(dev, OCP_BASE, 0xa000); -+ if (ret < 0) -+ return; -+ -+ ret = pla_write_word(dev, 0xb400 + reg * 2, val); -+} -+ -+static int r8153_bind(struct usbnet *dev, struct usb_interface *intf) -+{ -+ int status; -+ -+ status = usbnet_cdc_bind(dev, intf); -+ if (status < 0) -+ return status; -+ -+ dev->mii.dev = dev->net; -+ dev->mii.mdio_read = r8153_ecm_mdio_read; -+ dev->mii.mdio_write = r8153_ecm_mdio_write; -+ dev->mii.reg_num_mask = 0x1f; -+ dev->mii.supports_gmii = 1; -+ -+ return status; -+} -+ -+static const struct driver_info r8153_info = { -+ .description = "RTL8153 ECM Device", -+ .flags = FLAG_ETHER, -+ .bind = r8153_bind, -+ .unbind = usbnet_cdc_unbind, -+ .status = usbnet_cdc_status, -+ .manage_power = usbnet_manage_power, -+}; -+ -+static const struct usb_device_id products[] = { -+{ -+ USB_DEVICE_AND_INTERFACE_INFO(VENDOR_ID_REALTEK, 0x8153, USB_CLASS_COMM, -+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), -+ .driver_info = (unsigned long)&r8153_info, -+}, -+ -+ { }, /* END */ -+}; -+MODULE_DEVICE_TABLE(usb, products); -+ -+static int rtl8153_ecm_probe(struct usb_interface *intf, -+ const struct usb_device_id *id) -+{ -+#if IS_REACHABLE(CONFIG_USB_RTL8152) -+ if (rtl8152_get_version(intf)) -+ return -ENODEV; -+#endif -+ -+ return usbnet_probe(intf, id); -+} -+ -+static struct usb_driver r8153_ecm_driver = { -+ .name = "r8153_ecm", -+ .id_table = products, -+ .probe = rtl8153_ecm_probe, -+ .disconnect = usbnet_disconnect, -+ .suspend = usbnet_suspend, -+ .resume = usbnet_resume, -+ .reset_resume = usbnet_resume, -+ .supports_autosuspend = 1, -+ .disable_hub_initiated_lpm = 1, -+}; -+ -+module_usb_driver(r8153_ecm_driver); -+ -+MODULE_AUTHOR("Hayes Wang"); -+MODULE_DESCRIPTION("Realtek USB ECM device"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/include/linux/usb/r8152.h -@@ -0,0 +1,37 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+/* -+ * Copyright (c) 2020 Realtek Semiconductor Corp. All rights reserved. -+ */ -+ -+#ifndef __LINUX_R8152_H -+#define __LINUX_R8152_H -+ -+#define RTL8152_REQT_READ 0xc0 -+#define RTL8152_REQT_WRITE 0x40 -+#define RTL8152_REQ_GET_REGS 0x05 -+#define RTL8152_REQ_SET_REGS 0x05 -+ -+#define BYTE_EN_DWORD 0xff -+#define BYTE_EN_WORD 0x33 -+#define BYTE_EN_BYTE 0x11 -+#define BYTE_EN_SIX_BYTES 0x3f -+#define BYTE_EN_START_MASK 0x0f -+#define BYTE_EN_END_MASK 0xf0 -+ -+#define MCU_TYPE_PLA 0x0100 -+#define MCU_TYPE_USB 0x0000 -+ -+/* Define these values to match your device */ -+#define VENDOR_ID_REALTEK 0x0bda -+#define VENDOR_ID_MICROSOFT 0x045e -+#define VENDOR_ID_SAMSUNG 0x04e8 -+#define VENDOR_ID_LENOVO 0x17ef -+#define VENDOR_ID_LINKSYS 0x13b1 -+#define VENDOR_ID_NVIDIA 0x0955 -+#define VENDOR_ID_TPLINK 0x2357 -+ -+#if IS_REACHABLE(CONFIG_USB_RTL8152) -+extern u8 rtl8152_get_version(struct usb_interface *intf); -+#endif -+ -+#endif /* __LINUX_R8152_H */ diff --git a/target/linux/bcm27xx/patches-5.10/950-0545-net-usb-r8152-use-new-tasklet-API.patch b/target/linux/bcm27xx/patches-5.10/950-0545-net-usb-r8152-use-new-tasklet-API.patch deleted file mode 100644 index b625d5ea99..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0545-net-usb-r8152-use-new-tasklet-API.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 90f1afc7f96c8f7cf19c82e5f4b39e61a63b053d Mon Sep 17 00:00:00 2001 -From: Emil Renner Berthing <kernel@esmil.dk> -Date: Sun, 31 Jan 2021 00:47:29 +0100 -Subject: [PATCH] net: usb: r8152: use new tasklet API - -commit f3163f1cb87141c7a41a15a5d4c98b353f807b04 upstream. - -This converts the driver to use the new tasklet API introduced in -commit 12cc923f1ccc ("tasklet: Introduce new initialization API") - -Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> -Signed-off-by: Jakub Kicinski <kuba@kernel.org> ---- - drivers/net/usb/r8152.c | 8 +++----- - 1 file changed, 3 insertions(+), 5 deletions(-) - ---- a/drivers/net/usb/r8152.c -+++ b/drivers/net/usb/r8152.c -@@ -2394,11 +2394,9 @@ static void tx_bottom(struct r8152 *tp) - } while (res == 0); - } - --static void bottom_half(unsigned long data) -+static void bottom_half(struct tasklet_struct *t) - { -- struct r8152 *tp; -- -- tp = (struct r8152 *)data; -+ struct r8152 *tp = from_tasklet(tp, t, tx_tl); - - if (test_bit(RTL8152_UNPLUG, &tp->flags)) - return; -@@ -6718,7 +6716,7 @@ static int rtl8152_probe(struct usb_inte - mutex_init(&tp->control); - INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t); - INIT_DELAYED_WORK(&tp->hw_phy_work, rtl_hw_phy_work_func_t); -- tasklet_init(&tp->tx_tl, bottom_half, (unsigned long)tp); -+ tasklet_setup(&tp->tx_tl, bottom_half); - tasklet_disable(&tp->tx_tl); - - netdev->netdev_ops = &rtl8152_netdev_ops; diff --git a/target/linux/bcm27xx/patches-5.10/950-0546-r8152-replace-several-functions-about-phy-patch-requ.patch b/target/linux/bcm27xx/patches-5.10/950-0546-r8152-replace-several-functions-about-phy-patch-requ.patch deleted file mode 100644 index bbb2b5c0c9..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0546-r8152-replace-several-functions-about-phy-patch-requ.patch +++ /dev/null @@ -1,198 +0,0 @@ -From 86b98abf4f8c691c260c5113d6a2d32f5377caca Mon Sep 17 00:00:00 2001 -From: Hayes Wang <hayeswang@realtek.com> -Date: Wed, 3 Feb 2021 17:14:28 +0800 -Subject: [PATCH] r8152: replace several functions about phy patch - request - -commit a08c0d309d8c078d22717d815cf9853f6f2c07bd upstream. - -Replace r8153_patch_request() with rtl_phy_patch_request(). -Replace r8153_pre_ram_code() with rtl_pre_ram_code(). -Replace r8153_post_ram_code() with rtl_post_ram_code(). -Add rtl_patch_key_set(). - -The new functions have an additional parameter. It is used to wait -the patch request command finished. When the PHY is resumed from -the state of power cut, the PHY is at a safe mode and the -OCP_PHY_PATCH_STAT wouldn't be updated. For this situation, it is -safe to set patch request command without waiting OCP_PHY_PATCH_STAT. - -Signed-off-by: Hayes Wang <hayeswang@realtek.com> -Signed-off-by: Jakub Kicinski <kuba@kernel.org> ---- - drivers/net/usb/r8152.c | 84 ++++++++++++++++++++++++----------------- - 1 file changed, 50 insertions(+), 34 deletions(-) - ---- a/drivers/net/usb/r8152.c -+++ b/drivers/net/usb/r8152.c -@@ -3444,59 +3444,76 @@ static void rtl_clear_bp(struct r8152 *t - ocp_write_word(tp, type, PLA_BP_BA, 0); - } - --static int r8153_patch_request(struct r8152 *tp, bool request) -+static int rtl_phy_patch_request(struct r8152 *tp, bool request, bool wait) - { -- u16 data; -+ u16 data, check; - int i; - - data = ocp_reg_read(tp, OCP_PHY_PATCH_CMD); -- if (request) -+ if (request) { - data |= PATCH_REQUEST; -- else -+ check = 0; -+ } else { - data &= ~PATCH_REQUEST; -+ check = PATCH_READY; -+ } - ocp_reg_write(tp, OCP_PHY_PATCH_CMD, data); - -- for (i = 0; request && i < 5000; i++) { -+ for (i = 0; wait && i < 5000; i++) { -+ u32 ocp_data; -+ - usleep_range(1000, 2000); -- if (ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY) -+ ocp_data = ocp_reg_read(tp, OCP_PHY_PATCH_STAT); -+ if ((ocp_data & PATCH_READY) ^ check) - break; - } - -- if (request && !(ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)) { -- netif_err(tp, drv, tp->netdev, "patch request fail\n"); -- r8153_patch_request(tp, false); -+ if (request && wait && -+ !(ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)) { -+ dev_err(&tp->intf->dev, "PHY patch request fail\n"); -+ rtl_phy_patch_request(tp, false, false); - return -ETIME; - } else { - return 0; - } - } - --static int r8153_pre_ram_code(struct r8152 *tp, u16 key_addr, u16 patch_key) -+static void rtl_patch_key_set(struct r8152 *tp, u16 key_addr, u16 patch_key) - { -- if (r8153_patch_request(tp, true)) { -- dev_err(&tp->intf->dev, "patch request fail\n"); -- return -ETIME; -- } -+ if (patch_key && key_addr) { -+ sram_write(tp, key_addr, patch_key); -+ sram_write(tp, SRAM_PHY_LOCK, PHY_PATCH_LOCK); -+ } else if (key_addr) { -+ u16 data; - -- sram_write(tp, key_addr, patch_key); -- sram_write(tp, SRAM_PHY_LOCK, PHY_PATCH_LOCK); -+ sram_write(tp, 0x0000, 0x0000); - -- return 0; -+ data = ocp_reg_read(tp, OCP_PHY_LOCK); -+ data &= ~PATCH_LOCK; -+ ocp_reg_write(tp, OCP_PHY_LOCK, data); -+ -+ sram_write(tp, key_addr, 0x0000); -+ } else { -+ WARN_ON_ONCE(1); -+ } - } - --static int r8153_post_ram_code(struct r8152 *tp, u16 key_addr) -+static int -+rtl_pre_ram_code(struct r8152 *tp, u16 key_addr, u16 patch_key, bool wait) - { -- u16 data; -+ if (rtl_phy_patch_request(tp, true, wait)) -+ return -ETIME; - -- sram_write(tp, 0x0000, 0x0000); -+ rtl_patch_key_set(tp, key_addr, patch_key); - -- data = ocp_reg_read(tp, OCP_PHY_LOCK); -- data &= ~PATCH_LOCK; -- ocp_reg_write(tp, OCP_PHY_LOCK, data); -+ return 0; -+} - -- sram_write(tp, key_addr, 0x0000); -+static int rtl_post_ram_code(struct r8152 *tp, u16 key_addr, bool wait) -+{ -+ rtl_patch_key_set(tp, key_addr, 0); - -- r8153_patch_request(tp, false); -+ rtl_phy_patch_request(tp, false, wait); - - ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base); - -@@ -3981,7 +3998,7 @@ static void rtl8152_fw_mac_apply(struct - dev_dbg(&tp->intf->dev, "successfully applied %s\n", mac->info); - } - --static void rtl8152_apply_firmware(struct r8152 *tp) -+static void rtl8152_apply_firmware(struct r8152 *tp, bool power_cut) - { - struct rtl_fw *rtl_fw = &tp->rtl_fw; - const struct firmware *fw; -@@ -4012,12 +4029,11 @@ static void rtl8152_apply_firmware(struc - case RTL_FW_PHY_START: - key = (struct fw_phy_patch_key *)block; - key_addr = __le16_to_cpu(key->key_reg); -- r8153_pre_ram_code(tp, key_addr, -- __le16_to_cpu(key->key_data)); -+ rtl_pre_ram_code(tp, key_addr, __le16_to_cpu(key->key_data), !power_cut); - break; - case RTL_FW_PHY_STOP: - WARN_ON(!key_addr); -- r8153_post_ram_code(tp, key_addr); -+ rtl_post_ram_code(tp, key_addr, !power_cut); - break; - case RTL_FW_PHY_NC: - rtl8152_fw_phy_nc_apply(tp, (struct fw_phy_nc *)block); -@@ -4222,7 +4238,7 @@ static void rtl8152_disable(struct r8152 - - static void r8152b_hw_phy_cfg(struct r8152 *tp) - { -- rtl8152_apply_firmware(tp); -+ rtl8152_apply_firmware(tp, false); - rtl_eee_enable(tp, tp->eee_en); - r8152_aldps_en(tp, true); - r8152b_enable_fc(tp); -@@ -4504,7 +4520,7 @@ static void r8153_hw_phy_cfg(struct r815 - /* disable EEE before updating the PHY parameters */ - rtl_eee_enable(tp, false); - -- rtl8152_apply_firmware(tp); -+ rtl8152_apply_firmware(tp, false); - - if (tp->version == RTL_VER_03) { - data = ocp_reg_read(tp, OCP_EEE_CFG); -@@ -4578,7 +4594,7 @@ static void r8153b_hw_phy_cfg(struct r81 - /* disable EEE before updating the PHY parameters */ - rtl_eee_enable(tp, false); - -- rtl8152_apply_firmware(tp); -+ rtl8152_apply_firmware(tp, false); - - r8153b_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags)); - -@@ -4619,7 +4635,7 @@ static void r8153b_hw_phy_cfg(struct r81 - ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data); - - /* Advnace EEE */ -- if (!r8153_patch_request(tp, true)) { -+ if (!rtl_phy_patch_request(tp, true, true)) { - data = ocp_reg_read(tp, OCP_POWER_CFG); - data |= EEE_CLKDIV_EN; - ocp_reg_write(tp, OCP_POWER_CFG, data); -@@ -4636,7 +4652,7 @@ static void r8153b_hw_phy_cfg(struct r81 - ocp_reg_write(tp, OCP_SYSCLK_CFG, clk_div_expo(5)); - tp->ups_info._250m_ckdiv = true; - -- r8153_patch_request(tp, false); -+ rtl_phy_patch_request(tp, false, true); - } - - if (tp->eee_en) diff --git a/target/linux/bcm27xx/patches-5.10/950-0547-r8152-adjust-the-flow-of-power-cut-for-RTL8153B.patch b/target/linux/bcm27xx/patches-5.10/950-0547-r8152-adjust-the-flow-of-power-cut-for-RTL8153B.patch deleted file mode 100644 index b28e89a43f..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0547-r8152-adjust-the-flow-of-power-cut-for-RTL8153B.patch +++ /dev/null @@ -1,134 +0,0 @@ -From 29a61d8564ad3439d03c7ec135016a4e70072af1 Mon Sep 17 00:00:00 2001 -From: Hayes Wang <hayeswang@realtek.com> -Date: Wed, 3 Feb 2021 17:14:29 +0800 -Subject: [PATCH] r8152: adjust the flow of power cut for RTL8153B - -commit 80fd850b31f09263ad175b2f640d5c5c6f76ed41 upstream. - -For runtime resuming, the RTL8153B may be resumed from the state -of power cut, when enabling the feature of UPS. Then, the PHY -would be reset, so it is necessary to be initailized again. - -Besides, the USB_U1U2_TIMER also has to be set again, so I move -it from r8153b_init() to r8153b_hw_phy_cfg(). - -Signed-off-by: Hayes Wang <hayeswang@realtek.com> -Signed-off-by: Jakub Kicinski <kuba@kernel.org> ---- - drivers/net/usb/r8152.c | 68 ++++++++++++++++++++++++----------------- - 1 file changed, 40 insertions(+), 28 deletions(-) - ---- a/drivers/net/usb/r8152.c -+++ b/drivers/net/usb/r8152.c -@@ -1372,6 +1372,10 @@ void write_mii_word(struct net_device *n - static int - r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags); - -+static int -+rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u32 speed, u8 duplex, -+ u32 advertising); -+ - static int rtl8152_set_mac_address(struct net_device *netdev, void *p) - { - struct r8152 *tp = netdev_priv(netdev); -@@ -3183,8 +3187,6 @@ static void r8153b_ups_en(struct r8152 * - ocp_data |= BIT(0); - ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data); - } else { -- u16 data; -- - ocp_data &= ~(UPS_EN | USP_PREWAKE); - ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data); - -@@ -3192,31 +3194,20 @@ static void r8153b_ups_en(struct r8152 * - ocp_data &= ~BIT(0); - ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data); - -- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0); -- ocp_data &= ~PCUT_STATUS; -- ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data); -+ if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) { -+ int i; - -- data = r8153_phy_status(tp, 0); -+ for (i = 0; i < 500; i++) { -+ if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) & -+ AUTOLOAD_DONE) -+ break; -+ msleep(20); -+ } - -- switch (data) { -- case PHY_STAT_PWRDN: -- case PHY_STAT_EXT_INIT: -- r8153b_green_en(tp, -- test_bit(GREEN_ETHERNET, &tp->flags)); -- -- data = r8152_mdio_read(tp, MII_BMCR); -- data &= ~BMCR_PDOWN; -- data |= BMCR_RESET; -- r8152_mdio_write(tp, MII_BMCR, data); -+ tp->rtl_ops.hw_phy_cfg(tp); - -- data = r8153_phy_status(tp, PHY_STAT_LAN_ON); -- fallthrough; -- -- default: -- if (data != PHY_STAT_LAN_ON) -- netif_warn(tp, link, tp->netdev, -- "PHY not ready"); -- break; -+ rtl8152_set_speed(tp, tp->autoneg, tp->speed, -+ tp->duplex, tp->advertising); - } - } - } -@@ -4588,13 +4579,37 @@ static void r8153b_hw_phy_cfg(struct r81 - u32 ocp_data; - u16 data; - -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0); -+ if (ocp_data & PCUT_STATUS) { -+ ocp_data &= ~PCUT_STATUS; -+ ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data); -+ } -+ - /* disable ALDPS before updating the PHY parameters */ - r8153_aldps_en(tp, false); - - /* disable EEE before updating the PHY parameters */ - rtl_eee_enable(tp, false); - -- rtl8152_apply_firmware(tp, false); -+ /* U1/U2/L1 idle timer. 500 us */ -+ ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500); -+ -+ data = r8153_phy_status(tp, 0); -+ -+ switch (data) { -+ case PHY_STAT_PWRDN: -+ case PHY_STAT_EXT_INIT: -+ rtl8152_apply_firmware(tp, true); -+ -+ data = r8152_mdio_read(tp, MII_BMCR); -+ data &= ~BMCR_PDOWN; -+ r8152_mdio_write(tp, MII_BMCR, data); -+ break; -+ case PHY_STAT_LAN_ON: -+ default: -+ rtl8152_apply_firmware(tp, false); -+ break; -+ } - - r8153b_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags)); - -@@ -5543,9 +5558,6 @@ static void r8153b_init(struct r8152 *tp - /* MSC timer = 0xfff * 8ms = 32760 ms */ - ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff); - -- /* U1/U2/L1 idle timer. 500 us */ -- ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500); -- - r8153b_power_cut_en(tp, false); - r8153b_ups_en(tp, false); - r8153_queue_wake(tp, false); diff --git a/target/linux/bcm27xx/patches-5.10/950-0548-r8152-enable-U1-U2-for-USB_SPEED_SUPER.patch b/target/linux/bcm27xx/patches-5.10/950-0548-r8152-enable-U1-U2-for-USB_SPEED_SUPER.patch deleted file mode 100644 index 8cf91c3893..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0548-r8152-enable-U1-U2-for-USB_SPEED_SUPER.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 69b4339c0b9f3edc6a8f681f05efaaf4add1bb0e Mon Sep 17 00:00:00 2001 -From: Hayes Wang <hayeswang@realtek.com> -Date: Fri, 19 Feb 2021 17:04:40 +0800 -Subject: [PATCH] r8152: enable U1/U2 for USB_SPEED_SUPER - -commit 7a0ae61acde2cebd69665837170405eced86a6c7 upstream. - -U1/U2 shoued be enabled for USB 3.0 or later. The USB 2.0 doesn't -support it. - -Signed-off-by: Hayes Wang <hayeswang@realtek.com> -Signed-off-by: Jakub Kicinski <kuba@kernel.org> ---- - drivers/net/usb/r8152.c | 7 ++++--- - 1 file changed, 4 insertions(+), 3 deletions(-) - ---- a/drivers/net/usb/r8152.c -+++ b/drivers/net/usb/r8152.c -@@ -3336,7 +3336,7 @@ static void rtl8153b_runtime_enable(stru - r8153b_ups_en(tp, false); - r8153_queue_wake(tp, false); - rtl_runtime_suspend_enable(tp, false); -- if (tp->udev->speed != USB_SPEED_HIGH) -+ if (tp->udev->speed >= USB_SPEED_SUPER) - r8153b_u1u2en(tp, true); - } - } -@@ -5029,7 +5029,7 @@ static void rtl8153b_up(struct r8152 *tp - - r8153_aldps_en(tp, true); - -- if (tp->udev->speed != USB_SPEED_HIGH) -+ if (tp->udev->speed >= USB_SPEED_SUPER) - r8153b_u1u2en(tp, true); - } - -@@ -5571,8 +5571,9 @@ static void r8153b_init(struct r8152 *tp - ocp_data |= POLL_LINK_CHG; - ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data); - -- if (tp->udev->speed != USB_SPEED_HIGH) -+ if (tp->udev->speed >= USB_SPEED_SUPER) - r8153b_u1u2en(tp, true); -+ - usb_enable_lpm(tp->udev); - - /* MAC clock speed down */ diff --git a/target/linux/bcm27xx/patches-5.10/950-0549-r8152-check-if-the-pointer-of-the-function-exists.patch b/target/linux/bcm27xx/patches-5.10/950-0549-r8152-check-if-the-pointer-of-the-function-exists.patch deleted file mode 100644 index 5bc4e2b0a1..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0549-r8152-check-if-the-pointer-of-the-function-exists.patch +++ /dev/null @@ -1,51 +0,0 @@ -From e78b75f5be204a0a235da995d01c778dc282bb42 Mon Sep 17 00:00:00 2001 -From: Hayes Wang <hayeswang@realtek.com> -Date: Fri, 19 Feb 2021 17:04:41 +0800 -Subject: [PATCH] r8152: check if the pointer of the function exists - -commit c79515e47935c747282c6ed2ee5b2ef039756eeb upstream. - -Return error code if autosuspend_en, eee_get, or eee_set don't exist. - -Signed-off-by: Hayes Wang <hayeswang@realtek.com> -Signed-off-by: Jakub Kicinski <kuba@kernel.org> ---- - drivers/net/usb/r8152.c | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - ---- a/drivers/net/usb/r8152.c -+++ b/drivers/net/usb/r8152.c -@@ -5758,6 +5758,9 @@ static int rtl8152_runtime_suspend(struc - struct net_device *netdev = tp->netdev; - int ret = 0; - -+ if (!tp->rtl_ops.autosuspend_en) -+ return -EBUSY; -+ - set_bit(SELECTIVE_SUSPEND, &tp->flags); - smp_mb__after_atomic(); - -@@ -6157,6 +6160,11 @@ rtl_ethtool_get_eee(struct net_device *n - struct r8152 *tp = netdev_priv(net); - int ret; - -+ if (!tp->rtl_ops.eee_get) { -+ ret = -EOPNOTSUPP; -+ goto out; -+ } -+ - ret = usb_autopm_get_interface(tp->intf); - if (ret < 0) - goto out; -@@ -6179,6 +6187,11 @@ rtl_ethtool_set_eee(struct net_device *n - struct r8152 *tp = netdev_priv(net); - int ret; - -+ if (!tp->rtl_ops.eee_set) { -+ ret = -EOPNOTSUPP; -+ goto out; -+ } -+ - ret = usb_autopm_get_interface(tp->intf); - if (ret < 0) - goto out; diff --git a/target/linux/bcm27xx/patches-5.10/950-0550-r8152-replace-netif_err-with-dev_err.patch b/target/linux/bcm27xx/patches-5.10/950-0550-r8152-replace-netif_err-with-dev_err.patch deleted file mode 100644 index 967b4ccc16..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0550-r8152-replace-netif_err-with-dev_err.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 38e44c7926512cff0b2809dc329de2a8e769e523 Mon Sep 17 00:00:00 2001 -From: Hayes Wang <hayeswang@realtek.com> -Date: Fri, 19 Feb 2021 17:04:42 +0800 -Subject: [PATCH] r8152: replace netif_err with dev_err - -commit 156c3207611262266f0eea589ac3f00c5657320e upstream. - -Some messages are before calling register_netdev(), so replace -netif_err() with dev_err(). - -Signed-off-by: Hayes Wang <hayeswang@realtek.com> -Signed-off-by: Jakub Kicinski <kuba@kernel.org> ---- - drivers/net/usb/r8152.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/net/usb/r8152.c -+++ b/drivers/net/usb/r8152.c -@@ -6594,7 +6594,7 @@ static int rtl_ops_init(struct r8152 *tp - - default: - ret = -ENODEV; -- netif_err(tp, probe, tp->netdev, "Unknown Device\n"); -+ dev_err(&tp->intf->dev, "Unknown Device\n"); - break; - } - -@@ -6851,7 +6851,7 @@ static int rtl8152_probe(struct usb_inte - - ret = register_netdev(netdev); - if (ret != 0) { -- netif_err(tp, probe, netdev, "couldn't register the device\n"); -+ dev_err(&intf->dev, "couldn't register the device\n"); - goto out1; - } - diff --git a/target/linux/bcm27xx/patches-5.10/950-0551-r8152-spilt-rtl_set_eee_plus-and-r8153b_green_en.patch b/target/linux/bcm27xx/patches-5.10/950-0551-r8152-spilt-rtl_set_eee_plus-and-r8153b_green_en.patch deleted file mode 100644 index c49a4ce5b6..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0551-r8152-spilt-rtl_set_eee_plus-and-r8153b_green_en.patch +++ /dev/null @@ -1,89 +0,0 @@ -From 260814de2d6cb958767785ffcb2e76915d1be32b Mon Sep 17 00:00:00 2001 -From: Hayes Wang <hayeswang@realtek.com> -Date: Fri, 19 Feb 2021 17:04:43 +0800 -Subject: [PATCH] r8152: spilt rtl_set_eee_plus and r8153b_green_en - -commit 40fa7568ac230446d888b7ad402cff9e20fe3ad5 upstream. - -Add rtl_eee_plus_en() and rtl_green_en(). - -Signed-off-by: Hayes Wang <hayeswang@realtek.com> -Signed-off-by: Jakub Kicinski <kuba@kernel.org> ---- - drivers/net/usb/r8152.c | 43 ++++++++++++++++++++++++++--------------- - 1 file changed, 27 insertions(+), 16 deletions(-) - ---- a/drivers/net/usb/r8152.c -+++ b/drivers/net/usb/r8152.c -@@ -2633,21 +2633,24 @@ static inline u8 rtl8152_get_speed(struc - return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS); - } - --static void rtl_set_eee_plus(struct r8152 *tp) -+static void rtl_eee_plus_en(struct r8152 *tp, bool enable) - { - u32 ocp_data; -- u8 speed; - -- speed = rtl8152_get_speed(tp); -- if (speed & _10bps) { -- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR); -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR); -+ if (enable) - ocp_data |= EEEP_CR_EEEP_TX; -- ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data); -- } else { -- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR); -+ else - ocp_data &= ~EEEP_CR_EEEP_TX; -- ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data); -- } -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data); -+} -+ -+static void rtl_set_eee_plus(struct r8152 *tp) -+{ -+ if (rtl8152_get_speed(tp) & _10bps) -+ rtl_eee_plus_en(tp, true); -+ else -+ rtl_eee_plus_en(tp, false); - } - - static void rxdy_gated_en(struct r8152 *tp, bool enable) -@@ -3128,10 +3131,22 @@ static void r8153b_ups_flags(struct r815 - ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags); - } - --static void r8153b_green_en(struct r8152 *tp, bool enable) -+static void rtl_green_en(struct r8152 *tp, bool enable) - { - u16 data; - -+ data = sram_read(tp, SRAM_GREEN_CFG); -+ if (enable) -+ data |= GREEN_ETH_EN; -+ else -+ data &= ~GREEN_ETH_EN; -+ sram_write(tp, SRAM_GREEN_CFG, data); -+ -+ tp->ups_info.green = enable; -+} -+ -+static void r8153b_green_en(struct r8152 *tp, bool enable) -+{ - if (enable) { - sram_write(tp, 0x8045, 0); /* 10M abiq&ldvbias */ - sram_write(tp, 0x804d, 0x1222); /* 100M short abiq&ldvbias */ -@@ -3142,11 +3157,7 @@ static void r8153b_green_en(struct r8152 - sram_write(tp, 0x805d, 0x2444); /* 1000M short abiq&ldvbias */ - } - -- data = sram_read(tp, SRAM_GREEN_CFG); -- data |= GREEN_ETH_EN; -- sram_write(tp, SRAM_GREEN_CFG, data); -- -- tp->ups_info.green = enable; -+ rtl_green_en(tp, true); - } - - static u16 r8153_phy_status(struct r8152 *tp, u16 desired) diff --git a/target/linux/bcm27xx/patches-5.10/950-0552-r8152-set-inter-fram-gap-time-depending-on-speed.patch b/target/linux/bcm27xx/patches-5.10/950-0552-r8152-set-inter-fram-gap-time-depending-on-speed.patch deleted file mode 100644 index f2593e8f00..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0552-r8152-set-inter-fram-gap-time-depending-on-speed.patch +++ /dev/null @@ -1,75 +0,0 @@ -From f1bbbb260a8016373adf239c716d2da90e6ced0b Mon Sep 17 00:00:00 2001 -From: Hayes Wang <hayeswang@realtek.com> -Date: Fri, 16 Apr 2021 16:04:32 +0800 -Subject: [PATCH] r8152: set inter fram gap time depending on speed - -commit 5133bcc7481528e36fff0a3b056601efb704fb32 upstream. - -Set the maximum inter frame gap time (144ns) for speed 10M/half and -100M/half. It improves the performance for those speeds. And, there -is no effect for the other speeds. - -For 10M/half and 100M/half, the fast inter frame gap time let the -device couldn't use the feature of the aggregation effectively, -because the transfer would be completed fastly. Therefore, use the -maximum value to improve the effect of the aggregation. However, you -may not feel the improvement for fast CPUs, because they compensate -for the effect of the aggregation. - -Signed-off-by: Hayes Wang <hayeswang@realtek.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/usb/r8152.c | 28 ++++++++++++++++++++++++++++ - 1 file changed, 28 insertions(+) - ---- a/drivers/net/usb/r8152.c -+++ b/drivers/net/usb/r8152.c -@@ -250,6 +250,9 @@ - - /* PLA_TCR1 */ - #define VERSION_MASK 0x7cf0 -+#define IFG_MASK (BIT(3) | BIT(9) | BIT(8)) -+#define IFG_144NS BIT(9) -+#define IFG_96NS (BIT(9) | BIT(8)) - - /* PLA_MTPS */ - #define MTPS_JUMBO (12 * 1024 / 64) -@@ -2748,6 +2751,29 @@ static int rtl_stop_rx(struct r8152 *tp) - return 0; - } - -+static void rtl_set_ifg(struct r8152 *tp, u16 speed) -+{ -+ u32 ocp_data; -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR1); -+ ocp_data &= ~IFG_MASK; -+ if ((speed & (_10bps | _100bps)) && !(speed & FULL_DUP)) { -+ ocp_data |= IFG_144NS; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR1, ocp_data); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4); -+ ocp_data &= ~TX10MIDLE_EN; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data); -+ } else { -+ ocp_data |= IFG_96NS; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR1, ocp_data); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4); -+ ocp_data |= TX10MIDLE_EN; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data); -+ } -+} -+ - static inline void r8153b_rx_agg_chg_indicate(struct r8152 *tp) - { - ocp_write_byte(tp, MCU_TYPE_USB, USB_UPT_RXDMA_OWN, -@@ -2851,6 +2877,8 @@ static int rtl8153_enable(struct r8152 * - r8153_set_rx_early_timeout(tp); - r8153_set_rx_early_size(tp); - -+ rtl_set_ifg(tp, rtl8152_get_speed(tp)); -+ - if (tp->version == RTL_VER_09) { - u32 ocp_data; - diff --git a/target/linux/bcm27xx/patches-5.10/950-0553-r8152-adjust-rtl8152_check_firmware-function.patch b/target/linux/bcm27xx/patches-5.10/950-0553-r8152-adjust-rtl8152_check_firmware-function.patch deleted file mode 100644 index cddd39ea94..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0553-r8152-adjust-rtl8152_check_firmware-function.patch +++ /dev/null @@ -1,152 +0,0 @@ -From f10c9edf47d3fa240d965e151a48c670f5035b73 Mon Sep 17 00:00:00 2001 -From: Hayes Wang <hayeswang@realtek.com> -Date: Fri, 16 Apr 2021 16:04:33 +0800 -Subject: [PATCH] r8152: adjust rtl8152_check_firmware function - -commit a8a7be178e81a3d4b6972cbeb0ccd091ca2f9f89 upstream. - -Use bits operations to record and check the firmware. - -Signed-off-by: Hayes Wang <hayeswang@realtek.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/usb/r8152.c | 51 +++++++++++++++++++++++------------------ - 1 file changed, 29 insertions(+), 22 deletions(-) - ---- a/drivers/net/usb/r8152.c -+++ b/drivers/net/usb/r8152.c -@@ -875,6 +875,14 @@ struct fw_header { - struct fw_block blocks[]; - } __packed; - -+enum rtl8152_fw_flags { -+ FW_FLAGS_USB = 0, -+ FW_FLAGS_PLA, -+ FW_FLAGS_START, -+ FW_FLAGS_STOP, -+ FW_FLAGS_NC, -+}; -+ - /** - * struct fw_mac - a firmware block used by RTL_FW_PLA and RTL_FW_USB. - * The layout of the firmware block is: -@@ -3801,10 +3809,7 @@ static long rtl8152_check_firmware(struc - { - const struct firmware *fw = rtl_fw->fw; - struct fw_header *fw_hdr = (struct fw_header *)fw->data; -- struct fw_mac *pla = NULL, *usb = NULL; -- struct fw_phy_patch_key *start = NULL; -- struct fw_phy_nc *phy_nc = NULL; -- struct fw_block *stop = NULL; -+ unsigned long fw_flags = 0; - long ret = -EFAULT; - int i; - -@@ -3833,50 +3838,52 @@ static long rtl8152_check_firmware(struc - goto fail; - goto fw_end; - case RTL_FW_PLA: -- if (pla) { -+ if (test_bit(FW_FLAGS_PLA, &fw_flags)) { - dev_err(&tp->intf->dev, - "multiple PLA firmware encountered"); - goto fail; - } - -- pla = (struct fw_mac *)block; -- if (!rtl8152_is_fw_mac_ok(tp, pla)) { -+ if (!rtl8152_is_fw_mac_ok(tp, (struct fw_mac *)block)) { - dev_err(&tp->intf->dev, - "check PLA firmware failed\n"); - goto fail; - } -+ __set_bit(FW_FLAGS_PLA, &fw_flags); - break; - case RTL_FW_USB: -- if (usb) { -+ if (test_bit(FW_FLAGS_USB, &fw_flags)) { - dev_err(&tp->intf->dev, - "multiple USB firmware encountered"); - goto fail; - } - -- usb = (struct fw_mac *)block; -- if (!rtl8152_is_fw_mac_ok(tp, usb)) { -+ if (!rtl8152_is_fw_mac_ok(tp, (struct fw_mac *)block)) { - dev_err(&tp->intf->dev, - "check USB firmware failed\n"); - goto fail; - } -+ __set_bit(FW_FLAGS_USB, &fw_flags); - break; - case RTL_FW_PHY_START: -- if (start || phy_nc || stop) { -+ if (test_bit(FW_FLAGS_START, &fw_flags) || -+ test_bit(FW_FLAGS_NC, &fw_flags) || -+ test_bit(FW_FLAGS_STOP, &fw_flags)) { - dev_err(&tp->intf->dev, - "check PHY_START fail\n"); - goto fail; - } - -- if (__le32_to_cpu(block->length) != sizeof(*start)) { -+ if (__le32_to_cpu(block->length) != sizeof(struct fw_phy_patch_key)) { - dev_err(&tp->intf->dev, - "Invalid length for PHY_START\n"); - goto fail; - } -- -- start = (struct fw_phy_patch_key *)block; -+ __set_bit(FW_FLAGS_START, &fw_flags); - break; - case RTL_FW_PHY_STOP: -- if (stop || !start) { -+ if (test_bit(FW_FLAGS_STOP, &fw_flags) || -+ !test_bit(FW_FLAGS_START, &fw_flags)) { - dev_err(&tp->intf->dev, - "Check PHY_STOP fail\n"); - goto fail; -@@ -3887,28 +3894,28 @@ static long rtl8152_check_firmware(struc - "Invalid length for PHY_STOP\n"); - goto fail; - } -- -- stop = block; -+ __set_bit(FW_FLAGS_STOP, &fw_flags); - break; - case RTL_FW_PHY_NC: -- if (!start || stop) { -+ if (!test_bit(FW_FLAGS_START, &fw_flags) || -+ test_bit(FW_FLAGS_STOP, &fw_flags)) { - dev_err(&tp->intf->dev, - "check PHY_NC fail\n"); - goto fail; - } - -- if (phy_nc) { -+ if (test_bit(FW_FLAGS_NC, &fw_flags)) { - dev_err(&tp->intf->dev, - "multiple PHY NC encountered\n"); - goto fail; - } - -- phy_nc = (struct fw_phy_nc *)block; -- if (!rtl8152_is_fw_phy_nc_ok(tp, phy_nc)) { -+ if (!rtl8152_is_fw_phy_nc_ok(tp, (struct fw_phy_nc *)block)) { - dev_err(&tp->intf->dev, - "check PHY NC firmware failed\n"); - goto fail; - } -+ __set_bit(FW_FLAGS_NC, &fw_flags); - - break; - default: -@@ -3922,7 +3929,7 @@ static long rtl8152_check_firmware(struc - } - - fw_end: -- if ((phy_nc || start) && !stop) { -+ if (test_bit(FW_FLAGS_START, &fw_flags) && !test_bit(FW_FLAGS_STOP, &fw_flags)) { - dev_err(&tp->intf->dev, "without PHY_STOP\n"); - goto fail; - } diff --git a/target/linux/bcm27xx/patches-5.10/950-0554-r8152-add-help-function-to-change-mtu.patch b/target/linux/bcm27xx/patches-5.10/950-0554-r8152-add-help-function-to-change-mtu.patch deleted file mode 100644 index 3559e3b95a..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0554-r8152-add-help-function-to-change-mtu.patch +++ /dev/null @@ -1,157 +0,0 @@ -From f010a7d51cbb42bdb956f0a28b8868b15d7a3816 Mon Sep 17 00:00:00 2001 -From: Hayes Wang <hayeswang@realtek.com> -Date: Fri, 16 Apr 2021 16:04:34 +0800 -Subject: [PATCH] r8152: add help function to change mtu - -commit 67ce1a806f164e59a074fea8809725d3411eaa20 upstream. - -The different chips may have different requests when changing mtu. -Therefore, add a new help function of rtl_ops to change mtu. Besides, -reset the tx/rx after changing mtu. - -Additionally, add mtu_to_size() and size_to_mtu() macros to simplify -the code. - -Signed-off-by: Hayes Wang <hayeswang@realtek.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/usb/r8152.c | 53 ++++++++++++++++++++++++----------------- - 1 file changed, 31 insertions(+), 22 deletions(-) - ---- a/drivers/net/usb/r8152.c -+++ b/drivers/net/usb/r8152.c -@@ -658,15 +658,13 @@ enum rtl_register_content { - - #define INTR_LINK 0x0004 - --#define RTL8153_MAX_PACKET 9216 /* 9K */ --#define RTL8153_MAX_MTU (RTL8153_MAX_PACKET - VLAN_ETH_HLEN - \ -- ETH_FCS_LEN) - #define RTL8152_RMS (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN) - #define RTL8153_RMS RTL8153_MAX_PACKET - #define RTL8152_TX_TIMEOUT (5 * HZ) - #define RTL8152_NAPI_WEIGHT 64 --#define rx_reserved_size(x) ((x) + VLAN_ETH_HLEN + ETH_FCS_LEN + \ -- sizeof(struct rx_desc) + RX_ALIGN) -+#define mtu_to_size(m) ((m) + VLAN_ETH_HLEN + ETH_FCS_LEN) -+#define size_to_mtu(s) ((s) - VLAN_ETH_HLEN - ETH_FCS_LEN) -+#define rx_reserved_size(x) (mtu_to_size(x) + sizeof(struct rx_desc) + RX_ALIGN) - - /* rtl8152 flags */ - enum rtl8152_flags { -@@ -796,6 +794,7 @@ struct r8152 { - bool (*in_nway)(struct r8152 *tp); - void (*hw_phy_cfg)(struct r8152 *tp); - void (*autosuspend_en)(struct r8152 *tp, bool enable); -+ void (*change_mtu)(struct r8152 *tp); - } rtl_ops; - - struct ups_info { -@@ -1022,8 +1021,7 @@ enum tx_csum_stat { - static const int multicast_filter_limit = 32; - static unsigned int agg_buf_sz = 16384; - --#define RTL_LIMITED_TSO_SIZE (agg_buf_sz - sizeof(struct tx_desc) - \ -- VLAN_ETH_HLEN - ETH_FCS_LEN) -+#define RTL_LIMITED_TSO_SIZE (size_to_mtu(agg_buf_sz) - sizeof(struct tx_desc)) - - static - int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data) -@@ -2633,10 +2631,7 @@ static void rtl8152_nic_reset(struct r81 - - static void set_tx_qlen(struct r8152 *tp) - { -- struct net_device *netdev = tp->netdev; -- -- tp->tx_qlen = agg_buf_sz / (netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN + -- sizeof(struct tx_desc)); -+ tp->tx_qlen = agg_buf_sz / (mtu_to_size(tp->netdev->mtu) + sizeof(struct tx_desc)); - } - - static inline u8 rtl8152_get_speed(struct r8152 *tp) -@@ -4725,6 +4720,12 @@ static void r8153b_hw_phy_cfg(struct r81 - set_bit(PHY_RESET, &tp->flags); - } - -+static void rtl8153_change_mtu(struct r8152 *tp) -+{ -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu)); -+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO); -+} -+ - static void r8153_first_init(struct r8152 *tp) - { - u32 ocp_data; -@@ -4757,9 +4758,7 @@ static void r8153_first_init(struct r815 - - rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX); - -- ocp_data = tp->netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; -- ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, ocp_data); -- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO); -+ rtl8153_change_mtu(tp); - - ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0); - ocp_data |= TCR0_AUTO_FIFO; -@@ -4794,8 +4793,7 @@ static void r8153_enter_oob(struct r8152 - - wait_oob_link_list_ready(tp); - -- ocp_data = tp->netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; -- ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, ocp_data); -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu)); - - switch (tp->version) { - case RTL_VER_03: -@@ -6518,12 +6516,21 @@ static int rtl8152_change_mtu(struct net - dev->mtu = new_mtu; - - if (netif_running(dev)) { -- u32 rms = new_mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; -- -- ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, rms); -+ if (tp->rtl_ops.change_mtu) -+ tp->rtl_ops.change_mtu(tp); - -- if (netif_carrier_ok(dev)) -- r8153_set_rx_early_size(tp); -+ if (netif_carrier_ok(dev)) { -+ netif_stop_queue(dev); -+ napi_disable(&tp->napi); -+ tasklet_disable(&tp->tx_tl); -+ tp->rtl_ops.disable(tp); -+ tp->rtl_ops.enable(tp); -+ rtl_start_rx(tp); -+ tasklet_enable(&tp->tx_tl); -+ napi_enable(&tp->napi); -+ rtl8152_set_rx_mode(dev); -+ netif_wake_queue(dev); -+ } - } - - mutex_unlock(&tp->control); -@@ -6612,6 +6619,7 @@ static int rtl_ops_init(struct r8152 *tp - ops->in_nway = rtl8153_in_nway; - ops->hw_phy_cfg = r8153_hw_phy_cfg; - ops->autosuspend_en = rtl8153_runtime_enable; -+ ops->change_mtu = rtl8153_change_mtu; - if (tp->udev->speed < USB_SPEED_SUPER) - tp->rx_buf_sz = 16 * 1024; - else -@@ -6633,6 +6641,7 @@ static int rtl_ops_init(struct r8152 *tp - ops->in_nway = rtl8153_in_nway; - ops->hw_phy_cfg = r8153b_hw_phy_cfg; - ops->autosuspend_en = rtl8153b_runtime_enable; -+ ops->change_mtu = rtl8153_change_mtu; - tp->rx_buf_sz = 32 * 1024; - tp->eee_en = true; - tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX; -@@ -6853,7 +6862,7 @@ static int rtl8152_probe(struct usb_inte - netdev->max_mtu = ETH_DATA_LEN; - break; - default: -- netdev->max_mtu = RTL8153_MAX_MTU; -+ netdev->max_mtu = size_to_mtu(9 * 1024); - break; - } - diff --git a/target/linux/bcm27xx/patches-5.10/950-0555-r8152-support-new-chips.patch b/target/linux/bcm27xx/patches-5.10/950-0555-r8152-support-new-chips.patch deleted file mode 100644 index 06a141b451..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0555-r8152-support-new-chips.patch +++ /dev/null @@ -1,2886 +0,0 @@ -From e7439e7fd384f55f55837f7e4866e74d8dca3827 Mon Sep 17 00:00:00 2001 -From: Hayes Wang <hayeswang@realtek.com> -Date: Fri, 16 Apr 2021 16:04:35 +0800 -Subject: [PATCH] r8152: support new chips - -commit 195aae321c829dd1945900d75561e6aa79cce208 upstream. - -Support RTL8153C, RTL8153D, RTL8156A, and RTL8156B. The RTL8156A -and RTL8156B are the 2.5G ethernet. - -Signed-off-by: Hayes Wang <hayeswang@realtek.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/usb/r8152.c | 2634 +++++++++++++++++++++++++++++++++++---- - 1 file changed, 2359 insertions(+), 275 deletions(-) - ---- a/drivers/net/usb/r8152.c -+++ b/drivers/net/usb/r8152.c -@@ -44,10 +44,14 @@ - - #define PLA_IDR 0xc000 - #define PLA_RCR 0xc010 -+#define PLA_RCR1 0xc012 - #define PLA_RMS 0xc016 - #define PLA_RXFIFO_CTRL0 0xc0a0 -+#define PLA_RXFIFO_FULL 0xc0a2 - #define PLA_RXFIFO_CTRL1 0xc0a4 -+#define PLA_RX_FIFO_FULL 0xc0a6 - #define PLA_RXFIFO_CTRL2 0xc0a8 -+#define PLA_RX_FIFO_EMPTY 0xc0aa - #define PLA_DMY_REG0 0xc0b0 - #define PLA_FMC 0xc0b4 - #define PLA_CFG_WOL 0xc0b6 -@@ -64,6 +68,8 @@ - #define PLA_MACDBG_PRE 0xd38c /* RTL_VER_04 only */ - #define PLA_MACDBG_POST 0xd38e /* RTL_VER_04 only */ - #define PLA_EXTRA_STATUS 0xd398 -+#define PLA_GPHY_CTRL 0xd3ae -+#define PLA_POL_GPIO_CTRL 0xdc6a - #define PLA_EFUSE_DATA 0xdd00 - #define PLA_EFUSE_CMD 0xdd02 - #define PLA_LEDSEL 0xdd90 -@@ -73,6 +79,8 @@ - #define PLA_LWAKE_CTRL_REG 0xe007 - #define PLA_GPHY_INTR_IMR 0xe022 - #define PLA_EEE_CR 0xe040 -+#define PLA_EEE_TXTWSYS 0xe04c -+#define PLA_EEE_TXTWSYS_2P5G 0xe058 - #define PLA_EEEP_CR 0xe080 - #define PLA_MAC_PWR_CTRL 0xe0c0 - #define PLA_MAC_PWR_CTRL2 0xe0ca -@@ -83,6 +91,7 @@ - #define PLA_TCR1 0xe612 - #define PLA_MTPS 0xe615 - #define PLA_TXFIFO_CTRL 0xe618 -+#define PLA_TXFIFO_FULL 0xe61a - #define PLA_RSTTALLY 0xe800 - #define PLA_CR 0xe813 - #define PLA_CRWECR 0xe81c -@@ -99,6 +108,7 @@ - #define PLA_SFF_STS_7 0xe8de - #define PLA_PHYSTATUS 0xe908 - #define PLA_CONFIG6 0xe90a /* CONFIG6 */ -+#define PLA_USB_CFG 0xe952 - #define PLA_BP_BA 0xfc26 - #define PLA_BP_0 0xfc28 - #define PLA_BP_1 0xfc2a -@@ -113,6 +123,7 @@ - #define USB_USB2PHY 0xb41e - #define USB_SSPHYLINK1 0xb426 - #define USB_SSPHYLINK2 0xb428 -+#define USB_L1_CTRL 0xb45e - #define USB_U2P3_CTRL 0xb460 - #define USB_CSR_DUMMY1 0xb464 - #define USB_CSR_DUMMY2 0xb466 -@@ -123,7 +134,12 @@ - #define USB_FW_FIX_EN0 0xcfca - #define USB_FW_FIX_EN1 0xcfcc - #define USB_LPM_CONFIG 0xcfd8 -+#define USB_ECM_OPTION 0xcfee - #define USB_CSTMR 0xcfef /* RTL8153A */ -+#define USB_MISC_2 0xcfff -+#define USB_ECM_OP 0xd26b -+#define USB_GPHY_CTRL 0xd284 -+#define USB_SPEED_OPTION 0xd32a - #define USB_FW_CTRL 0xd334 /* RTL8153B */ - #define USB_FC_TIMER 0xd340 - #define USB_USB_CTRL 0xd406 -@@ -137,16 +153,20 @@ - #define USB_RX_EXTRA_AGGR_TMR 0xd432 /* RTL8153B */ - #define USB_TX_DMA 0xd434 - #define USB_UPT_RXDMA_OWN 0xd437 -+#define USB_UPHY3_MDCMDIO 0xd480 - #define USB_TOLERANCE 0xd490 - #define USB_LPM_CTRL 0xd41a - #define USB_BMU_RESET 0xd4b0 -+#define USB_BMU_CONFIG 0xd4b4 - #define USB_U1U2_TIMER 0xd4da - #define USB_FW_TASK 0xd4e8 /* RTL8153B */ -+#define USB_RX_AGGR_NUM 0xd4ee - #define USB_UPS_CTRL 0xd800 - #define USB_POWER_CUT 0xd80a - #define USB_MISC_0 0xd81a - #define USB_MISC_1 0xd81f - #define USB_AFE_CTRL2 0xd824 -+#define USB_UPHY_XTAL 0xd826 - #define USB_UPS_CFG 0xd842 - #define USB_UPS_FLAGS 0xd848 - #define USB_WDT1_CTRL 0xe404 -@@ -189,6 +209,9 @@ - #define OCP_EEE_ABLE 0xa5c4 - #define OCP_EEE_ADV 0xa5d0 - #define OCP_EEE_LPABLE 0xa5d2 -+#define OCP_10GBT_CTRL 0xa5d4 -+#define OCP_10GBT_STAT 0xa5d6 -+#define OCP_EEE_ADV2 0xa6d4 - #define OCP_PHY_STATE 0xa708 /* nway state for 8153 */ - #define OCP_PHY_PATCH_STAT 0xb800 - #define OCP_PHY_PATCH_CMD 0xb820 -@@ -200,6 +223,7 @@ - /* SRAM Register */ - #define SRAM_GREEN_CFG 0x8011 - #define SRAM_LPF_CFG 0x8012 -+#define SRAM_GPHY_FW_VER 0x801e - #define SRAM_10M_AMP1 0x8080 - #define SRAM_10M_AMP2 0x8082 - #define SRAM_IMPEDANCE 0x8084 -@@ -211,11 +235,19 @@ - #define RCR_AM 0x00000004 - #define RCR_AB 0x00000008 - #define RCR_ACPT_ALL (RCR_AAP | RCR_APM | RCR_AM | RCR_AB) -+#define SLOT_EN BIT(11) -+ -+/* PLA_RCR1 */ -+#define OUTER_VLAN BIT(7) -+#define INNER_VLAN BIT(6) - - /* PLA_RXFIFO_CTRL0 */ - #define RXFIFO_THR1_NORMAL 0x00080002 - #define RXFIFO_THR1_OOB 0x01800003 - -+/* PLA_RXFIFO_FULL */ -+#define RXFIFO_FULL_MASK 0xfff -+ - /* PLA_RXFIFO_CTRL1 */ - #define RXFIFO_THR2_FULL 0x00000060 - #define RXFIFO_THR2_HIGH 0x00000038 -@@ -286,6 +318,7 @@ - #define MCU_BORW_EN 0x4000 - - /* PLA_CPCR */ -+#define FLOW_CTRL_EN BIT(0) - #define CPCR_RX_VLAN 0x0040 - - /* PLA_CFG_WOL */ -@@ -311,6 +344,10 @@ - /* PLA_CONFIG6 */ - #define LANWAKE_CLR_EN BIT(0) - -+/* PLA_USB_CFG */ -+#define EN_XG_LIP BIT(1) -+#define EN_G_LIP BIT(2) -+ - /* PLA_CONFIG5 */ - #define BWF_EN 0x0040 - #define MWF_EN 0x0020 -@@ -334,6 +371,7 @@ - /* PLA_MAC_PWR_CTRL2 */ - #define EEE_SPDWN_RATIO 0x8007 - #define MAC_CLK_SPDWN_EN BIT(15) -+#define EEE_SPDWN_RATIO_MASK 0xff - - /* PLA_MAC_PWR_CTRL3 */ - #define PLA_MCU_SPDWN_EN BIT(14) -@@ -346,6 +384,7 @@ - #define PWRSAVE_SPDWN_EN 0x1000 - #define RXDV_SPDWN_EN 0x0800 - #define TX10MIDLE_EN 0x0100 -+#define IDLE_SPDWN_EN BIT(6) - #define TP100_SPDWN_EN 0x0020 - #define TP500_SPDWN_EN 0x0010 - #define TP1000_SPDWN_EN 0x0008 -@@ -386,6 +425,13 @@ - #define LINK_CHANGE_FLAG BIT(8) - #define POLL_LINK_CHG BIT(0) - -+/* PLA_GPHY_CTRL */ -+#define GPHY_FLASH BIT(1) -+ -+/* PLA_POL_GPIO_CTRL */ -+#define DACK_DET_EN BIT(15) -+#define POL_GPHY_PATCH BIT(4) -+ - /* USB_USB2PHY */ - #define USB2PHY_SUSPEND 0x0001 - #define USB2PHY_L1 0x0002 -@@ -434,6 +480,9 @@ - #define BMU_RESET_EP_IN 0x01 - #define BMU_RESET_EP_OUT 0x02 - -+/* USB_BMU_CONFIG */ -+#define ACT_ODMA BIT(1) -+ - /* USB_UPT_RXDMA_OWN */ - #define OWN_UPDATE BIT(0) - #define OWN_CLEAR BIT(1) -@@ -441,27 +490,52 @@ - /* USB_FW_TASK */ - #define FC_PATCH_TASK BIT(1) - -+/* USB_RX_AGGR_NUM */ -+#define RX_AGGR_NUM_MASK 0x1ff -+ - /* USB_UPS_CTRL */ - #define POWER_CUT 0x0100 - - /* USB_PM_CTRL_STATUS */ - #define RESUME_INDICATE 0x0001 - -+/* USB_ECM_OPTION */ -+#define BYPASS_MAC_RESET BIT(5) -+ - /* USB_CSTMR */ - #define FORCE_SUPER BIT(0) - -+/* USB_MISC_2 */ -+#define UPS_FORCE_PWR_DOWN BIT(0) -+ -+/* USB_ECM_OP */ -+#define EN_ALL_SPEED BIT(0) -+ -+/* USB_GPHY_CTRL */ -+#define GPHY_PATCH_DONE BIT(2) -+#define BYPASS_FLASH BIT(5) -+#define BACKUP_RESTRORE BIT(6) -+ -+/* USB_SPEED_OPTION */ -+#define RG_PWRDN_EN BIT(8) -+#define ALL_SPEED_OFF BIT(9) -+ - /* USB_FW_CTRL */ - #define FLOW_CTRL_PATCH_OPT BIT(1) -+#define AUTO_SPEEDUP BIT(3) -+#define FLOW_CTRL_PATCH_2 BIT(8) - - /* USB_FC_TIMER */ - #define CTRL_TIMER_EN BIT(15) - - /* USB_USB_CTRL */ -+#define CDC_ECM_EN BIT(3) - #define RX_AGG_DISABLE 0x0010 - #define RX_ZERO_EN 0x0080 - - /* USB_U2P3_CTRL */ - #define U2P3_ENABLE 0x0001 -+#define RX_DETECT8 BIT(3) - - /* USB_POWER_CUT */ - #define PWR_EN 0x0001 -@@ -497,8 +571,12 @@ - #define SEN_VAL_NORMAL 0xa000 - #define SEL_RXIDLE 0x0100 - -+/* USB_UPHY_XTAL */ -+#define OOBS_POLLING BIT(8) -+ - /* USB_UPS_CFG */ - #define SAW_CNT_1MS_MASK 0x0fff -+#define MID_REVERSE BIT(5) /* RTL8156A */ - - /* USB_UPS_FLAGS */ - #define UPS_FLAGS_R_TUNE BIT(0) -@@ -506,6 +584,7 @@ - #define UPS_FLAGS_250M_CKDIV BIT(2) - #define UPS_FLAGS_EN_ALDPS BIT(3) - #define UPS_FLAGS_CTAP_SHORT_DIS BIT(4) -+#define UPS_FLAGS_SPEED_MASK (0xf << 16) - #define ups_flags_speed(x) ((x) << 16) - #define UPS_FLAGS_EN_EEE BIT(20) - #define UPS_FLAGS_EN_500M_EEE BIT(21) -@@ -526,6 +605,8 @@ enum spd_duplex { - FORCE_10M_FULL, - FORCE_100M_HALF, - FORCE_100M_FULL, -+ FORCE_1000M_FULL, -+ NWAY_2500M_FULL, - }; - - /* OCP_ALDPS_CONFIG */ -@@ -590,6 +671,9 @@ enum spd_duplex { - #define EN_10M_CLKDIV BIT(11) - #define EN_10M_BGOFF 0x0080 - -+/* OCP_10GBT_CTRL */ -+#define RTL_ADV2_5G_F_R BIT(5) /* Advertise 2.5GBASE-T fast-retrain */ -+ - /* OCP_PHY_STATE */ - #define TXDIS_STATE 0x01 - #define ABD_STATE 0x02 -@@ -609,7 +693,8 @@ enum spd_duplex { - #define EN_EMI_L 0x0040 - - /* OCP_SYSCLK_CFG */ --#define clk_div_expo(x) (min(x, 5) << 8) -+#define sysclk_div_expo(x) (min(x, 5) << 8) -+#define clk_div_expo(x) (min(x, 5) << 4) - - /* SRAM_GREEN_CFG */ - #define GREEN_ETH_EN BIT(15) -@@ -640,6 +725,11 @@ enum spd_duplex { - #define BP4_SUPER_ONLY 0x1578 /* RTL_VER_04 only */ - - enum rtl_register_content { -+ _2500bps = BIT(10), -+ _1250bps = BIT(9), -+ _500bps = BIT(8), -+ _tx_flow = BIT(6), -+ _rx_flow = BIT(5), - _1000bps = 0x10, - _100bps = 0x08, - _10bps = 0x04, -@@ -647,6 +737,9 @@ enum rtl_register_content { - FULL_DUP = 0x01, - }; - -+#define is_speed_2500(_speed) (((_speed) & (_2500bps | LINK_STATUS)) == (_2500bps | LINK_STATUS)) -+#define is_flow_control(_speed) (((_speed) & (_tx_flow | _rx_flow)) == (_tx_flow | _rx_flow)) -+ - #define RTL8152_MAX_TX 4 - #define RTL8152_MAX_RX 10 - #define INTBUFSIZE 2 -@@ -661,7 +754,6 @@ enum rtl_register_content { - #define RTL8152_RMS (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN) - #define RTL8153_RMS RTL8153_MAX_PACKET - #define RTL8152_TX_TIMEOUT (5 * HZ) --#define RTL8152_NAPI_WEIGHT 64 - #define mtu_to_size(m) ((m) + VLAN_ETH_HLEN + ETH_FCS_LEN) - #define size_to_mtu(s) ((s) - VLAN_ETH_HLEN - ETH_FCS_LEN) - #define rx_reserved_size(x) (mtu_to_size(x) + sizeof(struct rx_desc) + RX_ALIGN) -@@ -798,6 +890,7 @@ struct r8152 { - } rtl_ops; - - struct ups_info { -+ u32 r_tune:1; - u32 _10m_ckdiv:1; - u32 _250m_ckdiv:1; - u32 aldps:1; -@@ -839,7 +932,9 @@ struct r8152 { - u32 rx_buf_sz; - u32 rx_copybreak; - u32 rx_pending; -+ u32 fc_pause_on, fc_pause_off; - -+ u32 support_2500full:1; - u16 ocp_base; - u16 speed; - u16 eee_adv; -@@ -999,6 +1094,15 @@ enum rtl_version { - RTL_VER_07, - RTL_VER_08, - RTL_VER_09, -+ -+ RTL_TEST_01, -+ RTL_VER_10, -+ RTL_VER_11, -+ RTL_VER_12, -+ RTL_VER_13, -+ RTL_VER_14, -+ RTL_VER_15, -+ - RTL_VER_MAX - }; - -@@ -1014,6 +1118,7 @@ enum tx_csum_stat { - #define RTL_ADVERTISED_100_FULL BIT(3) - #define RTL_ADVERTISED_1000_HALF BIT(4) - #define RTL_ADVERTISED_1000_FULL BIT(5) -+#define RTL_ADVERTISED_2500_FULL BIT(6) - - /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). - * The RTL chips use a 64 element hash table based on the Ethernet CRC. -@@ -2607,7 +2712,7 @@ static netdev_tx_t rtl8152_start_xmit(st - - static void r8152b_reset_packet_filter(struct r8152 *tp) - { -- u32 ocp_data; -+ u32 ocp_data; - - ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_FMC); - ocp_data &= ~FMC_FCR_MCU_EN; -@@ -2618,14 +2723,47 @@ static void r8152b_reset_packet_filter(s - - static void rtl8152_nic_reset(struct r8152 *tp) - { -- int i; -+ u32 ocp_data; -+ int i; - -- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, CR_RST); -+ switch (tp->version) { -+ case RTL_TEST_01: -+ case RTL_VER_10: -+ case RTL_VER_11: -+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR); -+ ocp_data &= ~CR_TE; -+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_BMU_RESET); -+ ocp_data &= ~BMU_RESET_EP_IN; -+ ocp_write_word(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); -+ ocp_data |= CDC_ECM_EN; -+ ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); -+ -+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR); -+ ocp_data &= ~CR_RE; -+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_BMU_RESET); -+ ocp_data |= BMU_RESET_EP_IN; -+ ocp_write_word(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); -+ ocp_data &= ~CDC_ECM_EN; -+ ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); -+ break; - -- for (i = 0; i < 1000; i++) { -- if (!(ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR) & CR_RST)) -- break; -- usleep_range(100, 400); -+ default: -+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, CR_RST); -+ -+ for (i = 0; i < 1000; i++) { -+ if (!(ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR) & CR_RST)) -+ break; -+ usleep_range(100, 400); -+ } -+ break; - } - } - -@@ -2634,9 +2772,9 @@ static void set_tx_qlen(struct r8152 *tp - tp->tx_qlen = agg_buf_sz / (mtu_to_size(tp->netdev->mtu) + sizeof(struct tx_desc)); - } - --static inline u8 rtl8152_get_speed(struct r8152 *tp) -+static inline u16 rtl8152_get_speed(struct r8152 *tp) - { -- return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS); -+ return ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHYSTATUS); - } - - static void rtl_eee_plus_en(struct r8152 *tp, bool enable) -@@ -2796,6 +2934,7 @@ static int rtl_enable(struct r8152 *tp) - switch (tp->version) { - case RTL_VER_08: - case RTL_VER_09: -+ case RTL_VER_14: - r8153b_rx_agg_chg_indicate(tp); - break; - default: -@@ -2833,6 +2972,7 @@ static void r8153_set_rx_early_timeout(s - - case RTL_VER_08: - case RTL_VER_09: -+ case RTL_VER_14: - /* The RTL8153B uses USB_RX_EXTRA_AGGR_TMR for rx timeout - * primarily. For USB_RX_EARLY_TIMEOUT, we fix it to 128ns. - */ -@@ -2842,6 +2982,18 @@ static void r8153_set_rx_early_timeout(s - ocp_data); - break; - -+ case RTL_VER_10: -+ case RTL_VER_11: -+ case RTL_VER_12: -+ case RTL_VER_13: -+ case RTL_VER_15: -+ ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT, -+ 640 / 8); -+ ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EXTRA_AGGR_TMR, -+ ocp_data); -+ r8153b_rx_agg_chg_indicate(tp); -+ break; -+ - default: - break; - } -@@ -2861,8 +3013,19 @@ static void r8153_set_rx_early_size(stru - break; - case RTL_VER_08: - case RTL_VER_09: -+ case RTL_VER_14: -+ ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE, -+ ocp_data / 8); -+ break; -+ case RTL_TEST_01: -+ case RTL_VER_10: -+ case RTL_VER_11: -+ case RTL_VER_12: -+ case RTL_VER_13: -+ case RTL_VER_15: - ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE, - ocp_data / 8); -+ r8153b_rx_agg_chg_indicate(tp); - break; - default: - WARN_ON_ONCE(1); -@@ -2872,6 +3035,8 @@ static void r8153_set_rx_early_size(stru - - static int rtl8153_enable(struct r8152 *tp) - { -+ u32 ocp_data; -+ - if (test_bit(RTL8152_UNPLUG, &tp->flags)) - return -ENODEV; - -@@ -2882,15 +3047,18 @@ static int rtl8153_enable(struct r8152 * - - rtl_set_ifg(tp, rtl8152_get_speed(tp)); - -- if (tp->version == RTL_VER_09) { -- u32 ocp_data; -- -+ switch (tp->version) { -+ case RTL_VER_09: -+ case RTL_VER_14: - ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK); - ocp_data &= ~FC_PATCH_TASK; - ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data); - usleep_range(1000, 2000); - ocp_data |= FC_PATCH_TASK; - ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data); -+ break; -+ default: -+ break; - } - - return rtl_enable(tp); -@@ -2955,12 +3123,40 @@ static void rtl_rx_vlan_en(struct r8152 - { - u32 ocp_data; - -- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR); -- if (enable) -- ocp_data |= CPCR_RX_VLAN; -- else -- ocp_data &= ~CPCR_RX_VLAN; -- ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data); -+ switch (tp->version) { -+ case RTL_VER_01: -+ case RTL_VER_02: -+ case RTL_VER_03: -+ case RTL_VER_04: -+ case RTL_VER_05: -+ case RTL_VER_06: -+ case RTL_VER_07: -+ case RTL_VER_08: -+ case RTL_VER_09: -+ case RTL_VER_14: -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR); -+ if (enable) -+ ocp_data |= CPCR_RX_VLAN; -+ else -+ ocp_data &= ~CPCR_RX_VLAN; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data); -+ break; -+ -+ case RTL_TEST_01: -+ case RTL_VER_10: -+ case RTL_VER_11: -+ case RTL_VER_12: -+ case RTL_VER_13: -+ case RTL_VER_15: -+ default: -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RCR1); -+ if (enable) -+ ocp_data |= OUTER_VLAN | INNER_VLAN; -+ else -+ ocp_data &= ~(OUTER_VLAN | INNER_VLAN); -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RCR1, ocp_data); -+ break; -+ } - } - - static int rtl8152_set_features(struct net_device *dev, -@@ -3053,6 +3249,40 @@ static void __rtl_set_wol(struct r8152 * - device_set_wakeup_enable(&tp->udev->dev, false); - } - -+static void r8153_mac_clk_speed_down(struct r8152 *tp, bool enable) -+{ -+ u32 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2); -+ -+ /* MAC clock speed down */ -+ if (enable) -+ ocp_data |= MAC_CLK_SPDWN_EN; -+ else -+ ocp_data &= ~MAC_CLK_SPDWN_EN; -+ -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data); -+} -+ -+static void r8156_mac_clk_spd(struct r8152 *tp, bool enable) -+{ -+ u32 ocp_data; -+ -+ /* MAC clock speed down */ -+ if (enable) { -+ /* aldps_spdwn_ratio, tp10_spdwn_ratio */ -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, -+ 0x0403); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2); -+ ocp_data &= ~EEE_SPDWN_RATIO_MASK; -+ ocp_data |= MAC_CLK_SPDWN_EN | 0x03; /* eee_spdwn_ratio */ -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data); -+ } else { -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2); -+ ocp_data &= ~MAC_CLK_SPDWN_EN; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data); -+ } -+} -+ - static void r8153_u1u2en(struct r8152 *tp, bool enable) - { - u8 u1u2[8]; -@@ -3112,6 +3342,9 @@ static void r8153b_ups_flags(struct r815 - if (tp->ups_info.eee_cmod_lv) - ups_flags |= UPS_FLAGS_EEE_CMOD_LV_EN; - -+ if (tp->ups_info.r_tune) -+ ups_flags |= UPS_FLAGS_R_TUNE; -+ - if (tp->ups_info._10m_ckdiv) - ups_flags |= UPS_FLAGS_EN_10M_CKDIV; - -@@ -3162,6 +3395,88 @@ static void r8153b_ups_flags(struct r815 - ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags); - } - -+static void r8156_ups_flags(struct r8152 *tp) -+{ -+ u32 ups_flags = 0; -+ -+ if (tp->ups_info.green) -+ ups_flags |= UPS_FLAGS_EN_GREEN; -+ -+ if (tp->ups_info.aldps) -+ ups_flags |= UPS_FLAGS_EN_ALDPS; -+ -+ if (tp->ups_info.eee) -+ ups_flags |= UPS_FLAGS_EN_EEE; -+ -+ if (tp->ups_info.flow_control) -+ ups_flags |= UPS_FLAGS_EN_FLOW_CTR; -+ -+ if (tp->ups_info.eee_ckdiv) -+ ups_flags |= UPS_FLAGS_EN_EEE_CKDIV; -+ -+ if (tp->ups_info._10m_ckdiv) -+ ups_flags |= UPS_FLAGS_EN_10M_CKDIV; -+ -+ if (tp->ups_info.eee_plloff_100) -+ ups_flags |= UPS_FLAGS_EEE_PLLOFF_100; -+ -+ if (tp->ups_info.eee_plloff_giga) -+ ups_flags |= UPS_FLAGS_EEE_PLLOFF_GIGA; -+ -+ if (tp->ups_info._250m_ckdiv) -+ ups_flags |= UPS_FLAGS_250M_CKDIV; -+ -+ switch (tp->ups_info.speed_duplex) { -+ case FORCE_10M_HALF: -+ ups_flags |= ups_flags_speed(0); -+ break; -+ case FORCE_10M_FULL: -+ ups_flags |= ups_flags_speed(1); -+ break; -+ case FORCE_100M_HALF: -+ ups_flags |= ups_flags_speed(2); -+ break; -+ case FORCE_100M_FULL: -+ ups_flags |= ups_flags_speed(3); -+ break; -+ case NWAY_10M_HALF: -+ ups_flags |= ups_flags_speed(4); -+ break; -+ case NWAY_10M_FULL: -+ ups_flags |= ups_flags_speed(5); -+ break; -+ case NWAY_100M_HALF: -+ ups_flags |= ups_flags_speed(6); -+ break; -+ case NWAY_100M_FULL: -+ ups_flags |= ups_flags_speed(7); -+ break; -+ case NWAY_1000M_FULL: -+ ups_flags |= ups_flags_speed(8); -+ break; -+ case NWAY_2500M_FULL: -+ ups_flags |= ups_flags_speed(9); -+ break; -+ default: -+ break; -+ } -+ -+ switch (tp->ups_info.lite_mode) { -+ case 1: -+ ups_flags |= 0 << 5; -+ break; -+ case 2: -+ ups_flags |= 2 << 5; -+ break; -+ case 0: -+ default: -+ ups_flags |= 1 << 5; -+ break; -+ } -+ -+ ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags); -+} -+ - static void rtl_green_en(struct r8152 *tp, bool enable) - { - u16 data; -@@ -3225,16 +3540,16 @@ static void r8153b_ups_en(struct r8152 * - ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN; - ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data); - -- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, 0xcfff); -- ocp_data |= BIT(0); -- ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data); -+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2); -+ ocp_data |= UPS_FORCE_PWR_DOWN; -+ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data); - } else { - ocp_data &= ~(UPS_EN | USP_PREWAKE); - ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data); - -- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, 0xcfff); -- ocp_data &= ~BIT(0); -- ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data); -+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2); -+ ocp_data &= ~UPS_FORCE_PWR_DOWN; -+ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data); - - if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) { - int i; -@@ -3254,6 +3569,95 @@ static void r8153b_ups_en(struct r8152 * - } - } - -+static void r8153c_ups_en(struct r8152 *tp, bool enable) -+{ -+ u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_POWER_CUT); -+ -+ if (enable) { -+ r8153b_ups_flags(tp); -+ -+ ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN; -+ ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data); -+ -+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2); -+ ocp_data |= UPS_FORCE_PWR_DOWN; -+ ocp_data &= ~BIT(7); -+ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data); -+ } else { -+ ocp_data &= ~(UPS_EN | USP_PREWAKE); -+ ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data); -+ -+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2); -+ ocp_data &= ~UPS_FORCE_PWR_DOWN; -+ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data); -+ -+ if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) { -+ int i; -+ -+ for (i = 0; i < 500; i++) { -+ if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) & -+ AUTOLOAD_DONE) -+ break; -+ msleep(20); -+ } -+ -+ tp->rtl_ops.hw_phy_cfg(tp); -+ -+ rtl8152_set_speed(tp, tp->autoneg, tp->speed, -+ tp->duplex, tp->advertising); -+ } -+ -+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34); -+ ocp_data |= BIT(8); -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data); -+ -+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML); -+ } -+} -+ -+static void r8156_ups_en(struct r8152 *tp, bool enable) -+{ -+ u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_POWER_CUT); -+ -+ if (enable) { -+ r8156_ups_flags(tp); -+ -+ ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN; -+ ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data); -+ -+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2); -+ ocp_data |= UPS_FORCE_PWR_DOWN; -+ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data); -+ -+ switch (tp->version) { -+ case RTL_VER_13: -+ case RTL_VER_15: -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPHY_XTAL); -+ ocp_data &= ~OOBS_POLLING; -+ ocp_write_byte(tp, MCU_TYPE_USB, USB_UPHY_XTAL, ocp_data); -+ break; -+ default: -+ break; -+ } -+ } else { -+ ocp_data &= ~(UPS_EN | USP_PREWAKE); -+ ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data); -+ -+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2); -+ ocp_data &= ~UPS_FORCE_PWR_DOWN; -+ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data); -+ -+ if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) { -+ tp->rtl_ops.hw_phy_cfg(tp); -+ -+ rtl8152_set_speed(tp, tp->autoneg, tp->speed, -+ tp->duplex, tp->advertising); -+ } -+ } -+} -+ - static void r8153_power_cut_en(struct r8152 *tp, bool enable) - { - u32 ocp_data; -@@ -3383,6 +3787,38 @@ static void rtl8153b_runtime_enable(stru - } - } - -+static void rtl8153c_runtime_enable(struct r8152 *tp, bool enable) -+{ -+ if (enable) { -+ r8153_queue_wake(tp, true); -+ r8153b_u1u2en(tp, false); -+ r8153_u2p3en(tp, false); -+ rtl_runtime_suspend_enable(tp, true); -+ r8153c_ups_en(tp, true); -+ } else { -+ r8153c_ups_en(tp, false); -+ r8153_queue_wake(tp, false); -+ rtl_runtime_suspend_enable(tp, false); -+ r8153b_u1u2en(tp, true); -+ } -+} -+ -+static void rtl8156_runtime_enable(struct r8152 *tp, bool enable) -+{ -+ if (enable) { -+ r8153_queue_wake(tp, true); -+ r8153b_u1u2en(tp, false); -+ r8153_u2p3en(tp, false); -+ rtl_runtime_suspend_enable(tp, true); -+ } else { -+ r8153_queue_wake(tp, false); -+ rtl_runtime_suspend_enable(tp, false); -+ r8153_u2p3en(tp, true); -+ if (tp->udev->speed >= USB_SPEED_SUPER) -+ r8153b_u1u2en(tp, true); -+ } -+} -+ - static void r8153_teredo_off(struct r8152 *tp) - { - u32 ocp_data; -@@ -3403,14 +3839,19 @@ static void r8153_teredo_off(struct r815 - - case RTL_VER_08: - case RTL_VER_09: -+ case RTL_TEST_01: -+ case RTL_VER_10: -+ case RTL_VER_11: -+ case RTL_VER_12: -+ case RTL_VER_13: -+ case RTL_VER_14: -+ case RTL_VER_15: -+ default: - /* The bit 0 ~ 7 are relative with teredo settings. They are - * W1C (write 1 to clear), so set all 1 to disable it. - */ - ocp_write_byte(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, 0xff); - break; -- -- default: -- break; - } - - ocp_write_word(tp, MCU_TYPE_PLA, PLA_WDT6_CTRL, WDT6_SET_MODE); -@@ -3445,6 +3886,12 @@ static void rtl_clear_bp(struct r8152 *t - break; - case RTL_VER_08: - case RTL_VER_09: -+ case RTL_VER_10: -+ case RTL_VER_11: -+ case RTL_VER_12: -+ case RTL_VER_13: -+ case RTL_VER_14: -+ case RTL_VER_15: - default: - if (type == MCU_TYPE_USB) { - ocp_write_word(tp, MCU_TYPE_USB, USB_BP2_EN, 0); -@@ -3654,6 +4101,11 @@ static bool rtl8152_is_fw_mac_ok(struct - case RTL_VER_06: - case RTL_VER_08: - case RTL_VER_09: -+ case RTL_VER_11: -+ case RTL_VER_12: -+ case RTL_VER_13: -+ case RTL_VER_14: -+ case RTL_VER_15: - fw_reg = 0xf800; - bp_ba_addr = PLA_BP_BA; - bp_en_addr = PLA_BP_EN; -@@ -3677,6 +4129,11 @@ static bool rtl8152_is_fw_mac_ok(struct - break; - case RTL_VER_08: - case RTL_VER_09: -+ case RTL_VER_11: -+ case RTL_VER_12: -+ case RTL_VER_13: -+ case RTL_VER_14: -+ case RTL_VER_15: - fw_reg = 0xe600; - bp_ba_addr = USB_BP_BA; - bp_en_addr = USB_BP2_EN; -@@ -4216,6 +4673,22 @@ static void r8153_eee_en(struct r8152 *t - tp->ups_info.eee = enable; - } - -+static void r8156_eee_en(struct r8152 *tp, bool enable) -+{ -+ u16 config; -+ -+ r8153_eee_en(tp, enable); -+ -+ config = ocp_reg_read(tp, OCP_EEE_ADV2); -+ -+ if (enable) -+ config |= MDIO_EEE_2_5GT; -+ else -+ config &= ~MDIO_EEE_2_5GT; -+ -+ ocp_reg_write(tp, OCP_EEE_ADV2, config); -+} -+ - static void rtl_eee_enable(struct r8152 *tp, bool enable) - { - switch (tp->version) { -@@ -4237,6 +4710,7 @@ static void rtl_eee_enable(struct r8152 - case RTL_VER_06: - case RTL_VER_08: - case RTL_VER_09: -+ case RTL_VER_14: - if (enable) { - r8153_eee_en(tp, true); - ocp_reg_write(tp, OCP_EEE_ADV, tp->eee_adv); -@@ -4245,6 +4719,19 @@ static void rtl_eee_enable(struct r8152 - ocp_reg_write(tp, OCP_EEE_ADV, 0); - } - break; -+ case RTL_VER_10: -+ case RTL_VER_11: -+ case RTL_VER_12: -+ case RTL_VER_13: -+ case RTL_VER_15: -+ if (enable) { -+ r8156_eee_en(tp, true); -+ ocp_reg_write(tp, OCP_EEE_ADV, tp->eee_adv); -+ } else { -+ r8156_eee_en(tp, false); -+ ocp_reg_write(tp, OCP_EEE_ADV, 0); -+ } -+ break; - default: - break; - } -@@ -4291,6 +4778,20 @@ static void wait_oob_link_list_ready(str - } - } - -+static void r8156b_wait_loading_flash(struct r8152 *tp) -+{ -+ if ((ocp_read_word(tp, MCU_TYPE_PLA, PLA_GPHY_CTRL) & GPHY_FLASH) && -+ !(ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL) & BYPASS_FLASH)) { -+ int i; -+ -+ for (i = 0; i < 100; i++) { -+ if (ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL) & GPHY_PATCH_DONE) -+ break; -+ usleep_range(1000, 2000); -+ } -+ } -+} -+ - static void r8152b_exit_oob(struct r8152 *tp) - { - u32 ocp_data; -@@ -4341,7 +4842,7 @@ static void r8152b_exit_oob(struct r8152 - } - - /* TX share fifo free credit full threshold */ -- ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL); -+ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL2); - - ocp_write_byte(tp, MCU_TYPE_USB, USB_TX_AGG, TX_AGG_MAX_THRESHOLD); - ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_HIGH); -@@ -4518,6 +5019,21 @@ static int r8153b_post_firmware_1(struct - return 0; - } - -+static int r8153c_post_firmware_1(struct r8152 *tp) -+{ -+ u32 ocp_data; -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL); -+ ocp_data |= FLOW_CTRL_PATCH_2; -+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK); -+ ocp_data |= FC_PATCH_TASK; -+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data); -+ -+ return 0; -+} -+ - static void r8153_aldps_en(struct r8152 *tp, bool enable) - { - u16 data; -@@ -4720,6 +5236,13 @@ static void r8153b_hw_phy_cfg(struct r81 - set_bit(PHY_RESET, &tp->flags); - } - -+static void r8153c_hw_phy_cfg(struct r8152 *tp) -+{ -+ r8153b_hw_phy_cfg(tp); -+ -+ tp->ups_info.r_tune = true; -+} -+ - static void rtl8153_change_mtu(struct r8152 *tp) - { - ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu)); -@@ -4807,6 +5330,7 @@ static void r8153_enter_oob(struct r8152 - - case RTL_VER_08: - case RTL_VER_09: -+ case RTL_VER_14: - /* Clear teredo wake event. bit[15:8] is the teredo wakeup - * type. Set it to zero. bits[7:0] are the W1C bits about - * the events. Set them to all 1 to clear them. -@@ -4843,6 +5367,96 @@ static void rtl8153_disable(struct r8152 - r8153_aldps_en(tp, true); - } - -+static int rtl8156_enable(struct r8152 *tp) -+{ -+ u32 ocp_data; -+ u16 speed; -+ -+ if (test_bit(RTL8152_UNPLUG, &tp->flags)) -+ return -ENODEV; -+ -+ set_tx_qlen(tp); -+ rtl_set_eee_plus(tp); -+ r8153_set_rx_early_timeout(tp); -+ r8153_set_rx_early_size(tp); -+ -+ speed = rtl8152_get_speed(tp); -+ rtl_set_ifg(tp, speed); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4); -+ if (speed & _2500bps) -+ ocp_data &= ~IDLE_SPDWN_EN; -+ else -+ ocp_data |= IDLE_SPDWN_EN; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data); -+ -+ if (speed & _1000bps) -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_TXTWSYS, 0x11); -+ else if (speed & _500bps) -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_TXTWSYS, 0x3d); -+ -+ if (tp->udev->speed == USB_SPEED_HIGH) { -+ /* USB 0xb45e[3:0] l1_nyet_hird */ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_L1_CTRL); -+ ocp_data &= ~0xf; -+ if (is_flow_control(speed)) -+ ocp_data |= 0xf; -+ else -+ ocp_data |= 0x1; -+ ocp_write_word(tp, MCU_TYPE_USB, USB_L1_CTRL, ocp_data); -+ } -+ -+ return rtl_enable(tp); -+} -+ -+static int rtl8156b_enable(struct r8152 *tp) -+{ -+ u32 ocp_data; -+ u16 speed; -+ -+ if (test_bit(RTL8152_UNPLUG, &tp->flags)) -+ return -ENODEV; -+ -+ set_tx_qlen(tp); -+ rtl_set_eee_plus(tp); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_RX_AGGR_NUM); -+ ocp_data &= ~RX_AGGR_NUM_MASK; -+ ocp_write_word(tp, MCU_TYPE_USB, USB_RX_AGGR_NUM, ocp_data); -+ -+ r8153_set_rx_early_timeout(tp); -+ r8153_set_rx_early_size(tp); -+ -+ speed = rtl8152_get_speed(tp); -+ rtl_set_ifg(tp, speed); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4); -+ if (speed & _2500bps) -+ ocp_data &= ~IDLE_SPDWN_EN; -+ else -+ ocp_data |= IDLE_SPDWN_EN; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data); -+ -+ if (tp->udev->speed == USB_SPEED_HIGH) { -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_L1_CTRL); -+ ocp_data &= ~0xf; -+ if (is_flow_control(speed)) -+ ocp_data |= 0xf; -+ else -+ ocp_data |= 0x1; -+ ocp_write_word(tp, MCU_TYPE_USB, USB_L1_CTRL, ocp_data); -+ } -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK); -+ ocp_data &= ~FC_PATCH_TASK; -+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data); -+ usleep_range(1000, 2000); -+ ocp_data |= FC_PATCH_TASK; -+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data); -+ -+ return rtl_enable(tp); -+} -+ - static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u32 speed, u8 duplex, - u32 advertising) - { -@@ -4891,58 +5505,73 @@ static int rtl8152_set_speed(struct r815 - - tp->mii.force_media = 1; - } else { -- u16 anar, tmp1; -+ u16 orig, new1; - u32 support; - - support = RTL_ADVERTISED_10_HALF | RTL_ADVERTISED_10_FULL | - RTL_ADVERTISED_100_HALF | RTL_ADVERTISED_100_FULL; - -- if (tp->mii.supports_gmii) -+ if (tp->mii.supports_gmii) { - support |= RTL_ADVERTISED_1000_FULL; - -+ if (tp->support_2500full) -+ support |= RTL_ADVERTISED_2500_FULL; -+ } -+ - if (!(advertising & support)) - return -EINVAL; - -- anar = r8152_mdio_read(tp, MII_ADVERTISE); -- tmp1 = anar & ~(ADVERTISE_10HALF | ADVERTISE_10FULL | -+ orig = r8152_mdio_read(tp, MII_ADVERTISE); -+ new1 = orig & ~(ADVERTISE_10HALF | ADVERTISE_10FULL | - ADVERTISE_100HALF | ADVERTISE_100FULL); - if (advertising & RTL_ADVERTISED_10_HALF) { -- tmp1 |= ADVERTISE_10HALF; -+ new1 |= ADVERTISE_10HALF; - tp->ups_info.speed_duplex = NWAY_10M_HALF; - } - if (advertising & RTL_ADVERTISED_10_FULL) { -- tmp1 |= ADVERTISE_10FULL; -+ new1 |= ADVERTISE_10FULL; - tp->ups_info.speed_duplex = NWAY_10M_FULL; - } - - if (advertising & RTL_ADVERTISED_100_HALF) { -- tmp1 |= ADVERTISE_100HALF; -+ new1 |= ADVERTISE_100HALF; - tp->ups_info.speed_duplex = NWAY_100M_HALF; - } - if (advertising & RTL_ADVERTISED_100_FULL) { -- tmp1 |= ADVERTISE_100FULL; -+ new1 |= ADVERTISE_100FULL; - tp->ups_info.speed_duplex = NWAY_100M_FULL; - } - -- if (anar != tmp1) { -- r8152_mdio_write(tp, MII_ADVERTISE, tmp1); -- tp->mii.advertising = tmp1; -+ if (orig != new1) { -+ r8152_mdio_write(tp, MII_ADVERTISE, new1); -+ tp->mii.advertising = new1; - } - - if (tp->mii.supports_gmii) { -- u16 gbcr; -- -- gbcr = r8152_mdio_read(tp, MII_CTRL1000); -- tmp1 = gbcr & ~(ADVERTISE_1000FULL | -+ orig = r8152_mdio_read(tp, MII_CTRL1000); -+ new1 = orig & ~(ADVERTISE_1000FULL | - ADVERTISE_1000HALF); - - if (advertising & RTL_ADVERTISED_1000_FULL) { -- tmp1 |= ADVERTISE_1000FULL; -+ new1 |= ADVERTISE_1000FULL; - tp->ups_info.speed_duplex = NWAY_1000M_FULL; - } - -- if (gbcr != tmp1) -- r8152_mdio_write(tp, MII_CTRL1000, tmp1); -+ if (orig != new1) -+ r8152_mdio_write(tp, MII_CTRL1000, new1); -+ } -+ -+ if (tp->support_2500full) { -+ orig = ocp_reg_read(tp, OCP_10GBT_CTRL); -+ new1 = orig & ~MDIO_AN_10GBT_CTRL_ADV2_5G; -+ -+ if (advertising & RTL_ADVERTISED_2500_FULL) { -+ new1 |= MDIO_AN_10GBT_CTRL_ADV2_5G; -+ tp->ups_info.speed_duplex = NWAY_2500M_FULL; -+ } -+ -+ if (orig != new1) -+ ocp_reg_write(tp, OCP_10GBT_CTRL, new1); - } - - bmcr = BMCR_ANENABLE | BMCR_ANRESTART; -@@ -5098,6 +5727,253 @@ static void rtl8153b_down(struct r8152 * - r8153_aldps_en(tp, true); - } - -+static void rtl8153c_change_mtu(struct r8152 *tp) -+{ -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu)); -+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, 10 * 1024 / 64); -+ -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, 512 / 64); -+ -+ /* Adjust the tx fifo free credit full threshold, otherwise -+ * the fifo would be too small to send a jumbo frame packet. -+ */ -+ if (tp->netdev->mtu < 8000) -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_FULL, 2048 / 8); -+ else -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_FULL, 900 / 8); -+} -+ -+static void rtl8153c_up(struct r8152 *tp) -+{ -+ u32 ocp_data; -+ -+ if (test_bit(RTL8152_UNPLUG, &tp->flags)) -+ return; -+ -+ r8153b_u1u2en(tp, false); -+ r8153_u2p3en(tp, false); -+ r8153_aldps_en(tp, false); -+ -+ rxdy_gated_en(tp, true); -+ r8153_teredo_off(tp); -+ -+ ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); -+ ocp_data &= ~RCR_ACPT_ALL; -+ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); -+ -+ rtl8152_nic_reset(tp); -+ rtl_reset_bmu(tp); -+ -+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); -+ ocp_data &= ~NOW_IS_OOB; -+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); -+ ocp_data &= ~MCU_BORW_EN; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); -+ -+ wait_oob_link_list_ready(tp); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); -+ ocp_data |= RE_INIT_LL; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); -+ -+ wait_oob_link_list_ready(tp); -+ -+ rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX); -+ -+ rtl8153c_change_mtu(tp); -+ -+ rtl8152_nic_reset(tp); -+ -+ /* rx share fifo credit full threshold */ -+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, 0x02); -+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL, 0x08); -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_NORMAL); -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_NORMAL); -+ -+ ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_B); -+ -+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34); -+ ocp_data |= BIT(8); -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data); -+ -+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3); -+ ocp_data &= ~PLA_MCU_SPDWN_EN; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data); -+ -+ r8153_aldps_en(tp, true); -+ r8153b_u1u2en(tp, true); -+} -+ -+static inline u32 fc_pause_on_auto(struct r8152 *tp) -+{ -+ return (ALIGN(mtu_to_size(tp->netdev->mtu), 1024) + 6 * 1024); -+} -+ -+static inline u32 fc_pause_off_auto(struct r8152 *tp) -+{ -+ return (ALIGN(mtu_to_size(tp->netdev->mtu), 1024) + 14 * 1024); -+} -+ -+static void r8156_fc_parameter(struct r8152 *tp) -+{ -+ u32 pause_on = tp->fc_pause_on ? tp->fc_pause_on : fc_pause_on_auto(tp); -+ u32 pause_off = tp->fc_pause_off ? tp->fc_pause_off : fc_pause_off_auto(tp); -+ -+ switch (tp->version) { -+ case RTL_VER_10: -+ case RTL_VER_11: -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_FULL, pause_on / 8); -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_EMPTY, pause_off / 8); -+ break; -+ case RTL_VER_12: -+ case RTL_VER_13: -+ case RTL_VER_15: -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_FULL, pause_on / 16); -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_EMPTY, pause_off / 16); -+ break; -+ default: -+ break; -+ } -+} -+ -+static void rtl8156_change_mtu(struct r8152 *tp) -+{ -+ u32 rx_max_size = mtu_to_size(tp->netdev->mtu); -+ -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, rx_max_size); -+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO); -+ r8156_fc_parameter(tp); -+ -+ /* TX share fifo free credit full threshold */ -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, 512 / 64); -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_FULL, -+ ALIGN(rx_max_size + sizeof(struct tx_desc), 1024) / 16); -+} -+ -+static void rtl8156_up(struct r8152 *tp) -+{ -+ u32 ocp_data; -+ -+ if (test_bit(RTL8152_UNPLUG, &tp->flags)) -+ return; -+ -+ r8153b_u1u2en(tp, false); -+ r8153_u2p3en(tp, false); -+ r8153_aldps_en(tp, false); -+ -+ rxdy_gated_en(tp, true); -+ r8153_teredo_off(tp); -+ -+ ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); -+ ocp_data &= ~RCR_ACPT_ALL; -+ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); -+ -+ rtl8152_nic_reset(tp); -+ rtl_reset_bmu(tp); -+ -+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); -+ ocp_data &= ~NOW_IS_OOB; -+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); -+ ocp_data &= ~MCU_BORW_EN; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); -+ -+ rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX); -+ -+ rtl8156_change_mtu(tp); -+ -+ switch (tp->version) { -+ case RTL_TEST_01: -+ case RTL_VER_10: -+ case RTL_VER_11: -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_BMU_CONFIG); -+ ocp_data |= ACT_ODMA; -+ ocp_write_word(tp, MCU_TYPE_USB, USB_BMU_CONFIG, ocp_data); -+ break; -+ default: -+ break; -+ } -+ -+ /* share FIFO settings */ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL); -+ ocp_data &= ~RXFIFO_FULL_MASK; -+ ocp_data |= 0x08; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL, ocp_data); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3); -+ ocp_data &= ~PLA_MCU_SPDWN_EN; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION); -+ ocp_data &= ~(RG_PWRDN_EN | ALL_SPEED_OFF); -+ ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, ocp_data); -+ -+ ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, 0x00600400); -+ -+ if (tp->saved_wolopts != __rtl_get_wol(tp)) { -+ netif_warn(tp, ifup, tp->netdev, "wol setting is changed\n"); -+ __rtl_set_wol(tp, tp->saved_wolopts); -+ } -+ -+ r8153_aldps_en(tp, true); -+ r8153_u2p3en(tp, true); -+ -+ if (tp->udev->speed >= USB_SPEED_SUPER) -+ r8153b_u1u2en(tp, true); -+} -+ -+static void rtl8156_down(struct r8152 *tp) -+{ -+ u32 ocp_data; -+ -+ if (test_bit(RTL8152_UNPLUG, &tp->flags)) { -+ rtl_drop_queued_tx(tp); -+ return; -+ } -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3); -+ ocp_data |= PLA_MCU_SPDWN_EN; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data); -+ -+ r8153b_u1u2en(tp, false); -+ r8153_u2p3en(tp, false); -+ r8153b_power_cut_en(tp, false); -+ r8153_aldps_en(tp, false); -+ -+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); -+ ocp_data &= ~NOW_IS_OOB; -+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); -+ -+ rtl_disable(tp); -+ rtl_reset_bmu(tp); -+ -+ /* Clear teredo wake event. bit[15:8] is the teredo wakeup -+ * type. Set it to zero. bits[7:0] are the W1C bits about -+ * the events. Set them to all 1 to clear them. -+ */ -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_WAKE_BASE, 0x00ff); -+ -+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); -+ ocp_data |= NOW_IS_OOB; -+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); -+ -+ rtl_rx_vlan_en(tp, true); -+ rxdy_gated_en(tp, false); -+ -+ ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); -+ ocp_data |= RCR_APM | RCR_AM | RCR_AB; -+ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); -+ -+ r8153_aldps_en(tp, true); -+} -+ - static bool rtl8152_in_nway(struct r8152 *tp) - { - u16 nway_state; -@@ -5128,7 +6004,7 @@ static void set_carrier(struct r8152 *tp - { - struct net_device *netdev = tp->netdev; - struct napi_struct *napi = &tp->napi; -- u8 speed; -+ u16 speed; - - speed = rtl8152_get_speed(tp); - -@@ -5141,7 +6017,7 @@ static void set_carrier(struct r8152 *tp - rtl_start_rx(tp); - clear_bit(RTL8152_SET_RX_MODE, &tp->flags); - _rtl8152_set_rx_mode(netdev); -- napi_enable(&tp->napi); -+ napi_enable(napi); - netif_wake_queue(netdev); - netif_info(tp, link, netdev, "carrier on\n"); - } else if (netif_queue_stopped(netdev) && -@@ -5521,14 +6397,9 @@ static void r8153_init(struct r8152 *tp) - - ocp_write_word(tp, MCU_TYPE_USB, USB_CONNECT_TIMER, 0x0001); - -- /* MAC clock speed down */ -- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, 0); -- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, 0); -- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, 0); -- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, 0); -- - r8153_power_cut_en(tp, false); - rtl_runtime_suspend_enable(tp, false); -+ r8153_mac_clk_speed_down(tp, false); - r8153_u1u2en(tp, true); - usb_enable_lpm(tp->udev); - -@@ -5621,9 +6492,7 @@ static void r8153b_init(struct r8152 *tp - usb_enable_lpm(tp->udev); - - /* MAC clock speed down */ -- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2); -- ocp_data |= MAC_CLK_SPDWN_EN; -- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data); -+ r8153_mac_clk_speed_down(tp, true); - - ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3); - ocp_data &= ~PLA_MCU_SPDWN_EN; -@@ -5652,6 +6521,1069 @@ static void r8153b_init(struct r8152 *tp - r8152_led_configuration(tp); - } - -+static void r8153c_init(struct r8152 *tp) -+{ -+ u32 ocp_data; -+ u16 data; -+ int i; -+ -+ if (test_bit(RTL8152_UNPLUG, &tp->flags)) -+ return; -+ -+ r8153b_u1u2en(tp, false); -+ -+ /* Disable spi_en */ -+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG); -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5); -+ ocp_data &= ~BIT(3); -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG5, ocp_data); -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, 0xcbf0); -+ ocp_data |= BIT(1); -+ ocp_write_word(tp, MCU_TYPE_USB, 0xcbf0, ocp_data); -+ -+ for (i = 0; i < 500; i++) { -+ if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) & -+ AUTOLOAD_DONE) -+ break; -+ -+ msleep(20); -+ if (test_bit(RTL8152_UNPLUG, &tp->flags)) -+ return; -+ } -+ -+ data = r8153_phy_status(tp, 0); -+ -+ data = r8152_mdio_read(tp, MII_BMCR); -+ if (data & BMCR_PDOWN) { -+ data &= ~BMCR_PDOWN; -+ r8152_mdio_write(tp, MII_BMCR, data); -+ } -+ -+ data = r8153_phy_status(tp, PHY_STAT_LAN_ON); -+ -+ r8153_u2p3en(tp, false); -+ -+ /* MSC timer = 0xfff * 8ms = 32760 ms */ -+ ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff); -+ -+ r8153b_power_cut_en(tp, false); -+ r8153c_ups_en(tp, false); -+ r8153_queue_wake(tp, false); -+ rtl_runtime_suspend_enable(tp, false); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS); -+ if (rtl8152_get_speed(tp) & LINK_STATUS) -+ ocp_data |= CUR_LINK_OK; -+ else -+ ocp_data &= ~CUR_LINK_OK; -+ -+ ocp_data |= POLL_LINK_CHG; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data); -+ -+ r8153b_u1u2en(tp, true); -+ -+ usb_enable_lpm(tp->udev); -+ -+ /* MAC clock speed down */ -+ r8153_mac_clk_speed_down(tp, true); -+ -+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2); -+ ocp_data &= ~BIT(7); -+ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data); -+ -+ set_bit(GREEN_ETHERNET, &tp->flags); -+ -+ /* rx aggregation */ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); -+ ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN); -+ ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); -+ -+ rtl_tally_reset(tp); -+ -+ tp->coalesce = 15000; /* 15 us */ -+} -+ -+static void r8156_hw_phy_cfg(struct r8152 *tp) -+{ -+ u32 ocp_data; -+ u16 data; -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0); -+ if (ocp_data & PCUT_STATUS) { -+ ocp_data &= ~PCUT_STATUS; -+ ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data); -+ } -+ -+ data = r8153_phy_status(tp, 0); -+ switch (data) { -+ case PHY_STAT_EXT_INIT: -+ rtl8152_apply_firmware(tp, true); -+ -+ data = ocp_reg_read(tp, 0xa468); -+ data &= ~(BIT(3) | BIT(1)); -+ ocp_reg_write(tp, 0xa468, data); -+ break; -+ case PHY_STAT_LAN_ON: -+ case PHY_STAT_PWRDN: -+ default: -+ rtl8152_apply_firmware(tp, false); -+ break; -+ } -+ -+ /* disable ALDPS before updating the PHY parameters */ -+ r8153_aldps_en(tp, false); -+ -+ /* disable EEE before updating the PHY parameters */ -+ rtl_eee_enable(tp, false); -+ -+ data = r8153_phy_status(tp, PHY_STAT_LAN_ON); -+ WARN_ON_ONCE(data != PHY_STAT_LAN_ON); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR); -+ ocp_data |= PFM_PWM_SWITCH; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data); -+ -+ switch (tp->version) { -+ case RTL_VER_10: -+ data = ocp_reg_read(tp, 0xad40); -+ data &= ~0x3ff; -+ data |= BIT(7) | BIT(2); -+ ocp_reg_write(tp, 0xad40, data); -+ -+ data = ocp_reg_read(tp, 0xad4e); -+ data |= BIT(4); -+ ocp_reg_write(tp, 0xad4e, data); -+ data = ocp_reg_read(tp, 0xad16); -+ data &= ~0x3ff; -+ data |= 0x6; -+ ocp_reg_write(tp, 0xad16, data); -+ data = ocp_reg_read(tp, 0xad32); -+ data &= ~0x3f; -+ data |= 6; -+ ocp_reg_write(tp, 0xad32, data); -+ data = ocp_reg_read(tp, 0xac08); -+ data &= ~(BIT(12) | BIT(8)); -+ ocp_reg_write(tp, 0xac08, data); -+ data = ocp_reg_read(tp, 0xac8a); -+ data |= BIT(12) | BIT(13) | BIT(14); -+ data &= ~BIT(15); -+ ocp_reg_write(tp, 0xac8a, data); -+ data = ocp_reg_read(tp, 0xad18); -+ data |= BIT(10); -+ ocp_reg_write(tp, 0xad18, data); -+ data = ocp_reg_read(tp, 0xad1a); -+ data |= 0x3ff; -+ ocp_reg_write(tp, 0xad1a, data); -+ data = ocp_reg_read(tp, 0xad1c); -+ data |= 0x3ff; -+ ocp_reg_write(tp, 0xad1c, data); -+ -+ data = sram_read(tp, 0x80ea); -+ data &= ~0xff00; -+ data |= 0xc400; -+ sram_write(tp, 0x80ea, data); -+ data = sram_read(tp, 0x80eb); -+ data &= ~0x0700; -+ data |= 0x0300; -+ sram_write(tp, 0x80eb, data); -+ data = sram_read(tp, 0x80f8); -+ data &= ~0xff00; -+ data |= 0x1c00; -+ sram_write(tp, 0x80f8, data); -+ data = sram_read(tp, 0x80f1); -+ data &= ~0xff00; -+ data |= 0x3000; -+ sram_write(tp, 0x80f1, data); -+ -+ data = sram_read(tp, 0x80fe); -+ data &= ~0xff00; -+ data |= 0xa500; -+ sram_write(tp, 0x80fe, data); -+ data = sram_read(tp, 0x8102); -+ data &= ~0xff00; -+ data |= 0x5000; -+ sram_write(tp, 0x8102, data); -+ data = sram_read(tp, 0x8015); -+ data &= ~0xff00; -+ data |= 0x3300; -+ sram_write(tp, 0x8015, data); -+ data = sram_read(tp, 0x8100); -+ data &= ~0xff00; -+ data |= 0x7000; -+ sram_write(tp, 0x8100, data); -+ data = sram_read(tp, 0x8014); -+ data &= ~0xff00; -+ data |= 0xf000; -+ sram_write(tp, 0x8014, data); -+ data = sram_read(tp, 0x8016); -+ data &= ~0xff00; -+ data |= 0x6500; -+ sram_write(tp, 0x8016, data); -+ data = sram_read(tp, 0x80dc); -+ data &= ~0xff00; -+ data |= 0xed00; -+ sram_write(tp, 0x80dc, data); -+ data = sram_read(tp, 0x80df); -+ data |= BIT(8); -+ sram_write(tp, 0x80df, data); -+ data = sram_read(tp, 0x80e1); -+ data &= ~BIT(8); -+ sram_write(tp, 0x80e1, data); -+ -+ data = ocp_reg_read(tp, 0xbf06); -+ data &= ~0x003f; -+ data |= 0x0038; -+ ocp_reg_write(tp, 0xbf06, data); -+ -+ sram_write(tp, 0x819f, 0xddb6); -+ -+ ocp_reg_write(tp, 0xbc34, 0x5555); -+ data = ocp_reg_read(tp, 0xbf0a); -+ data &= ~0x0e00; -+ data |= 0x0a00; -+ ocp_reg_write(tp, 0xbf0a, data); -+ -+ data = ocp_reg_read(tp, 0xbd2c); -+ data &= ~BIT(13); -+ ocp_reg_write(tp, 0xbd2c, data); -+ break; -+ case RTL_VER_11: -+ data = ocp_reg_read(tp, 0xad16); -+ data |= 0x3ff; -+ ocp_reg_write(tp, 0xad16, data); -+ data = ocp_reg_read(tp, 0xad32); -+ data &= ~0x3f; -+ data |= 6; -+ ocp_reg_write(tp, 0xad32, data); -+ data = ocp_reg_read(tp, 0xac08); -+ data &= ~(BIT(12) | BIT(8)); -+ ocp_reg_write(tp, 0xac08, data); -+ data = ocp_reg_read(tp, 0xacc0); -+ data &= ~0x3; -+ data |= BIT(1); -+ ocp_reg_write(tp, 0xacc0, data); -+ data = ocp_reg_read(tp, 0xad40); -+ data &= ~0xe7; -+ data |= BIT(6) | BIT(2); -+ ocp_reg_write(tp, 0xad40, data); -+ data = ocp_reg_read(tp, 0xac14); -+ data &= ~BIT(7); -+ ocp_reg_write(tp, 0xac14, data); -+ data = ocp_reg_read(tp, 0xac80); -+ data &= ~(BIT(8) | BIT(9)); -+ ocp_reg_write(tp, 0xac80, data); -+ data = ocp_reg_read(tp, 0xac5e); -+ data &= ~0x7; -+ data |= BIT(1); -+ ocp_reg_write(tp, 0xac5e, data); -+ ocp_reg_write(tp, 0xad4c, 0x00a8); -+ ocp_reg_write(tp, 0xac5c, 0x01ff); -+ data = ocp_reg_read(tp, 0xac8a); -+ data &= ~0xf0; -+ data |= BIT(4) | BIT(5); -+ ocp_reg_write(tp, 0xac8a, data); -+ ocp_reg_write(tp, 0xb87c, 0x8157); -+ data = ocp_reg_read(tp, 0xb87e); -+ data &= ~0xff00; -+ data |= 0x0500; -+ ocp_reg_write(tp, 0xb87e, data); -+ ocp_reg_write(tp, 0xb87c, 0x8159); -+ data = ocp_reg_read(tp, 0xb87e); -+ data &= ~0xff00; -+ data |= 0x0700; -+ ocp_reg_write(tp, 0xb87e, data); -+ -+ /* AAGC */ -+ ocp_reg_write(tp, 0xb87c, 0x80a2); -+ ocp_reg_write(tp, 0xb87e, 0x0153); -+ ocp_reg_write(tp, 0xb87c, 0x809c); -+ ocp_reg_write(tp, 0xb87e, 0x0153); -+ -+ /* EEE parameter */ -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_TXTWSYS_2P5G, 0x0056); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_USB_CFG); -+ ocp_data |= EN_XG_LIP | EN_G_LIP; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_USB_CFG, ocp_data); -+ -+ sram_write(tp, 0x8257, 0x020f); /* XG PLL */ -+ sram_write(tp, 0x80ea, 0x7843); /* GIGA Master */ -+ -+ if (rtl_phy_patch_request(tp, true, true)) -+ return; -+ -+ /* Advance EEE */ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4); -+ ocp_data |= EEE_SPDWN_EN; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data); -+ -+ data = ocp_reg_read(tp, OCP_DOWN_SPEED); -+ data &= ~(EN_EEE_100 | EN_EEE_1000); -+ data |= EN_10M_CLKDIV; -+ ocp_reg_write(tp, OCP_DOWN_SPEED, data); -+ tp->ups_info._10m_ckdiv = true; -+ tp->ups_info.eee_plloff_100 = false; -+ tp->ups_info.eee_plloff_giga = false; -+ -+ data = ocp_reg_read(tp, OCP_POWER_CFG); -+ data &= ~EEE_CLKDIV_EN; -+ ocp_reg_write(tp, OCP_POWER_CFG, data); -+ tp->ups_info.eee_ckdiv = false; -+ -+ ocp_reg_write(tp, OCP_SYSCLK_CFG, 0); -+ ocp_reg_write(tp, OCP_SYSCLK_CFG, sysclk_div_expo(5)); -+ tp->ups_info._250m_ckdiv = false; -+ -+ rtl_phy_patch_request(tp, false, true); -+ -+ /* enable ADC Ibias Cal */ -+ data = ocp_reg_read(tp, 0xd068); -+ data |= BIT(13); -+ ocp_reg_write(tp, 0xd068, data); -+ -+ /* enable Thermal Sensor */ -+ data = sram_read(tp, 0x81a2); -+ data &= ~BIT(8); -+ sram_write(tp, 0x81a2, data); -+ data = ocp_reg_read(tp, 0xb54c); -+ data &= ~0xff00; -+ data |= 0xdb00; -+ ocp_reg_write(tp, 0xb54c, data); -+ -+ /* Nway 2.5G Lite */ -+ data = ocp_reg_read(tp, 0xa454); -+ data &= ~BIT(0); -+ ocp_reg_write(tp, 0xa454, data); -+ -+ /* CS DSP solution */ -+ data = ocp_reg_read(tp, OCP_10GBT_CTRL); -+ data |= RTL_ADV2_5G_F_R; -+ ocp_reg_write(tp, OCP_10GBT_CTRL, data); -+ data = ocp_reg_read(tp, 0xad4e); -+ data &= ~BIT(4); -+ ocp_reg_write(tp, 0xad4e, data); -+ data = ocp_reg_read(tp, 0xa86a); -+ data &= ~BIT(0); -+ ocp_reg_write(tp, 0xa86a, data); -+ -+ /* MDI SWAP */ -+ if ((ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CFG) & MID_REVERSE) && -+ (ocp_reg_read(tp, 0xd068) & BIT(1))) { -+ u16 swap_a, swap_b; -+ -+ data = ocp_reg_read(tp, 0xd068); -+ data &= ~0x1f; -+ data |= 0x1; /* p0 */ -+ ocp_reg_write(tp, 0xd068, data); -+ swap_a = ocp_reg_read(tp, 0xd06a); -+ data &= ~0x18; -+ data |= 0x18; /* p3 */ -+ ocp_reg_write(tp, 0xd068, data); -+ swap_b = ocp_reg_read(tp, 0xd06a); -+ data &= ~0x18; /* p0 */ -+ ocp_reg_write(tp, 0xd068, data); -+ ocp_reg_write(tp, 0xd06a, -+ (swap_a & ~0x7ff) | (swap_b & 0x7ff)); -+ data |= 0x18; /* p3 */ -+ ocp_reg_write(tp, 0xd068, data); -+ ocp_reg_write(tp, 0xd06a, -+ (swap_b & ~0x7ff) | (swap_a & 0x7ff)); -+ data &= ~0x18; -+ data |= 0x08; /* p1 */ -+ ocp_reg_write(tp, 0xd068, data); -+ swap_a = ocp_reg_read(tp, 0xd06a); -+ data &= ~0x18; -+ data |= 0x10; /* p2 */ -+ ocp_reg_write(tp, 0xd068, data); -+ swap_b = ocp_reg_read(tp, 0xd06a); -+ data &= ~0x18; -+ data |= 0x08; /* p1 */ -+ ocp_reg_write(tp, 0xd068, data); -+ ocp_reg_write(tp, 0xd06a, -+ (swap_a & ~0x7ff) | (swap_b & 0x7ff)); -+ data &= ~0x18; -+ data |= 0x10; /* p2 */ -+ ocp_reg_write(tp, 0xd068, data); -+ ocp_reg_write(tp, 0xd06a, -+ (swap_b & ~0x7ff) | (swap_a & 0x7ff)); -+ swap_a = ocp_reg_read(tp, 0xbd5a); -+ swap_b = ocp_reg_read(tp, 0xbd5c); -+ ocp_reg_write(tp, 0xbd5a, (swap_a & ~0x1f1f) | -+ ((swap_b & 0x1f) << 8) | -+ ((swap_b >> 8) & 0x1f)); -+ ocp_reg_write(tp, 0xbd5c, (swap_b & ~0x1f1f) | -+ ((swap_a & 0x1f) << 8) | -+ ((swap_a >> 8) & 0x1f)); -+ swap_a = ocp_reg_read(tp, 0xbc18); -+ swap_b = ocp_reg_read(tp, 0xbc1a); -+ ocp_reg_write(tp, 0xbc18, (swap_a & ~0x1f1f) | -+ ((swap_b & 0x1f) << 8) | -+ ((swap_b >> 8) & 0x1f)); -+ ocp_reg_write(tp, 0xbc1a, (swap_b & ~0x1f1f) | -+ ((swap_a & 0x1f) << 8) | -+ ((swap_a >> 8) & 0x1f)); -+ } -+ break; -+ default: -+ break; -+ } -+ -+ rtl_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags)); -+ -+ data = ocp_reg_read(tp, 0xa428); -+ data &= ~BIT(9); -+ ocp_reg_write(tp, 0xa428, data); -+ data = ocp_reg_read(tp, 0xa5ea); -+ data &= ~BIT(0); -+ ocp_reg_write(tp, 0xa5ea, data); -+ tp->ups_info.lite_mode = 0; -+ -+ if (tp->eee_en) -+ rtl_eee_enable(tp, true); -+ -+ r8153_aldps_en(tp, true); -+ r8152b_enable_fc(tp); -+ r8153_u2p3en(tp, true); -+ -+ set_bit(PHY_RESET, &tp->flags); -+} -+ -+static void r8156b_hw_phy_cfg(struct r8152 *tp) -+{ -+ u32 ocp_data; -+ u16 data; -+ -+ switch (tp->version) { -+ case RTL_VER_12: -+ ocp_reg_write(tp, 0xbf86, 0x9000); -+ data = ocp_reg_read(tp, 0xc402); -+ data |= BIT(10); -+ ocp_reg_write(tp, 0xc402, data); -+ data &= ~BIT(10); -+ ocp_reg_write(tp, 0xc402, data); -+ ocp_reg_write(tp, 0xbd86, 0x1010); -+ ocp_reg_write(tp, 0xbd88, 0x1010); -+ data = ocp_reg_read(tp, 0xbd4e); -+ data &= ~(BIT(10) | BIT(11)); -+ data |= BIT(11); -+ ocp_reg_write(tp, 0xbd4e, data); -+ data = ocp_reg_read(tp, 0xbf46); -+ data &= ~0xf00; -+ data |= 0x700; -+ ocp_reg_write(tp, 0xbf46, data); -+ break; -+ case RTL_VER_13: -+ case RTL_VER_15: -+ r8156b_wait_loading_flash(tp); -+ break; -+ default: -+ break; -+ } -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0); -+ if (ocp_data & PCUT_STATUS) { -+ ocp_data &= ~PCUT_STATUS; -+ ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data); -+ } -+ -+ data = r8153_phy_status(tp, 0); -+ switch (data) { -+ case PHY_STAT_EXT_INIT: -+ rtl8152_apply_firmware(tp, true); -+ -+ data = ocp_reg_read(tp, 0xa466); -+ data &= ~BIT(0); -+ ocp_reg_write(tp, 0xa466, data); -+ -+ data = ocp_reg_read(tp, 0xa468); -+ data &= ~(BIT(3) | BIT(1)); -+ ocp_reg_write(tp, 0xa468, data); -+ break; -+ case PHY_STAT_LAN_ON: -+ case PHY_STAT_PWRDN: -+ default: -+ rtl8152_apply_firmware(tp, false); -+ break; -+ } -+ -+ data = r8152_mdio_read(tp, MII_BMCR); -+ if (data & BMCR_PDOWN) { -+ data &= ~BMCR_PDOWN; -+ r8152_mdio_write(tp, MII_BMCR, data); -+ } -+ -+ /* disable ALDPS before updating the PHY parameters */ -+ r8153_aldps_en(tp, false); -+ -+ /* disable EEE before updating the PHY parameters */ -+ rtl_eee_enable(tp, false); -+ -+ data = r8153_phy_status(tp, PHY_STAT_LAN_ON); -+ WARN_ON_ONCE(data != PHY_STAT_LAN_ON); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR); -+ ocp_data |= PFM_PWM_SWITCH; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data); -+ -+ switch (tp->version) { -+ case RTL_VER_12: -+ data = ocp_reg_read(tp, 0xbc08); -+ data |= BIT(3) | BIT(2); -+ ocp_reg_write(tp, 0xbc08, data); -+ -+ data = sram_read(tp, 0x8fff); -+ data &= ~0xff00; -+ data |= 0x0400; -+ sram_write(tp, 0x8fff, data); -+ -+ data = ocp_reg_read(tp, 0xacda); -+ data |= 0xff00; -+ ocp_reg_write(tp, 0xacda, data); -+ data = ocp_reg_read(tp, 0xacde); -+ data |= 0xf000; -+ ocp_reg_write(tp, 0xacde, data); -+ ocp_reg_write(tp, 0xac8c, 0x0ffc); -+ ocp_reg_write(tp, 0xac46, 0xb7b4); -+ ocp_reg_write(tp, 0xac50, 0x0fbc); -+ ocp_reg_write(tp, 0xac3c, 0x9240); -+ ocp_reg_write(tp, 0xac4e, 0x0db4); -+ ocp_reg_write(tp, 0xacc6, 0x0707); -+ ocp_reg_write(tp, 0xacc8, 0xa0d3); -+ ocp_reg_write(tp, 0xad08, 0x0007); -+ -+ ocp_reg_write(tp, 0xb87c, 0x8560); -+ ocp_reg_write(tp, 0xb87e, 0x19cc); -+ ocp_reg_write(tp, 0xb87c, 0x8562); -+ ocp_reg_write(tp, 0xb87e, 0x19cc); -+ ocp_reg_write(tp, 0xb87c, 0x8564); -+ ocp_reg_write(tp, 0xb87e, 0x19cc); -+ ocp_reg_write(tp, 0xb87c, 0x8566); -+ ocp_reg_write(tp, 0xb87e, 0x147d); -+ ocp_reg_write(tp, 0xb87c, 0x8568); -+ ocp_reg_write(tp, 0xb87e, 0x147d); -+ ocp_reg_write(tp, 0xb87c, 0x856a); -+ ocp_reg_write(tp, 0xb87e, 0x147d); -+ ocp_reg_write(tp, 0xb87c, 0x8ffe); -+ ocp_reg_write(tp, 0xb87e, 0x0907); -+ ocp_reg_write(tp, 0xb87c, 0x80d6); -+ ocp_reg_write(tp, 0xb87e, 0x2801); -+ ocp_reg_write(tp, 0xb87c, 0x80f2); -+ ocp_reg_write(tp, 0xb87e, 0x2801); -+ ocp_reg_write(tp, 0xb87c, 0x80f4); -+ ocp_reg_write(tp, 0xb87e, 0x6077); -+ ocp_reg_write(tp, 0xb506, 0x01e7); -+ -+ ocp_reg_write(tp, 0xb87c, 0x8013); -+ ocp_reg_write(tp, 0xb87e, 0x0700); -+ ocp_reg_write(tp, 0xb87c, 0x8fb9); -+ ocp_reg_write(tp, 0xb87e, 0x2801); -+ ocp_reg_write(tp, 0xb87c, 0x8fba); -+ ocp_reg_write(tp, 0xb87e, 0x0100); -+ ocp_reg_write(tp, 0xb87c, 0x8fbc); -+ ocp_reg_write(tp, 0xb87e, 0x1900); -+ ocp_reg_write(tp, 0xb87c, 0x8fbe); -+ ocp_reg_write(tp, 0xb87e, 0xe100); -+ ocp_reg_write(tp, 0xb87c, 0x8fc0); -+ ocp_reg_write(tp, 0xb87e, 0x0800); -+ ocp_reg_write(tp, 0xb87c, 0x8fc2); -+ ocp_reg_write(tp, 0xb87e, 0xe500); -+ ocp_reg_write(tp, 0xb87c, 0x8fc4); -+ ocp_reg_write(tp, 0xb87e, 0x0f00); -+ ocp_reg_write(tp, 0xb87c, 0x8fc6); -+ ocp_reg_write(tp, 0xb87e, 0xf100); -+ ocp_reg_write(tp, 0xb87c, 0x8fc8); -+ ocp_reg_write(tp, 0xb87e, 0x0400); -+ ocp_reg_write(tp, 0xb87c, 0x8fca); -+ ocp_reg_write(tp, 0xb87e, 0xf300); -+ ocp_reg_write(tp, 0xb87c, 0x8fcc); -+ ocp_reg_write(tp, 0xb87e, 0xfd00); -+ ocp_reg_write(tp, 0xb87c, 0x8fce); -+ ocp_reg_write(tp, 0xb87e, 0xff00); -+ ocp_reg_write(tp, 0xb87c, 0x8fd0); -+ ocp_reg_write(tp, 0xb87e, 0xfb00); -+ ocp_reg_write(tp, 0xb87c, 0x8fd2); -+ ocp_reg_write(tp, 0xb87e, 0x0100); -+ ocp_reg_write(tp, 0xb87c, 0x8fd4); -+ ocp_reg_write(tp, 0xb87e, 0xf400); -+ ocp_reg_write(tp, 0xb87c, 0x8fd6); -+ ocp_reg_write(tp, 0xb87e, 0xff00); -+ ocp_reg_write(tp, 0xb87c, 0x8fd8); -+ ocp_reg_write(tp, 0xb87e, 0xf600); -+ -+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_USB_CFG); -+ ocp_data |= EN_XG_LIP | EN_G_LIP; -+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_USB_CFG, ocp_data); -+ ocp_reg_write(tp, 0xb87c, 0x813d); -+ ocp_reg_write(tp, 0xb87e, 0x390e); -+ ocp_reg_write(tp, 0xb87c, 0x814f); -+ ocp_reg_write(tp, 0xb87e, 0x790e); -+ ocp_reg_write(tp, 0xb87c, 0x80b0); -+ ocp_reg_write(tp, 0xb87e, 0x0f31); -+ data = ocp_reg_read(tp, 0xbf4c); -+ data |= BIT(1); -+ ocp_reg_write(tp, 0xbf4c, data); -+ data = ocp_reg_read(tp, 0xbcca); -+ data |= BIT(9) | BIT(8); -+ ocp_reg_write(tp, 0xbcca, data); -+ ocp_reg_write(tp, 0xb87c, 0x8141); -+ ocp_reg_write(tp, 0xb87e, 0x320e); -+ ocp_reg_write(tp, 0xb87c, 0x8153); -+ ocp_reg_write(tp, 0xb87e, 0x720e); -+ ocp_reg_write(tp, 0xb87c, 0x8529); -+ ocp_reg_write(tp, 0xb87e, 0x050e); -+ data = ocp_reg_read(tp, OCP_EEE_CFG); -+ data &= ~CTAP_SHORT_EN; -+ ocp_reg_write(tp, OCP_EEE_CFG, data); -+ -+ sram_write(tp, 0x816c, 0xc4a0); -+ sram_write(tp, 0x8170, 0xc4a0); -+ sram_write(tp, 0x8174, 0x04a0); -+ sram_write(tp, 0x8178, 0x04a0); -+ sram_write(tp, 0x817c, 0x0719); -+ sram_write(tp, 0x8ff4, 0x0400); -+ sram_write(tp, 0x8ff1, 0x0404); -+ -+ ocp_reg_write(tp, 0xbf4a, 0x001b); -+ ocp_reg_write(tp, 0xb87c, 0x8033); -+ ocp_reg_write(tp, 0xb87e, 0x7c13); -+ ocp_reg_write(tp, 0xb87c, 0x8037); -+ ocp_reg_write(tp, 0xb87e, 0x7c13); -+ ocp_reg_write(tp, 0xb87c, 0x803b); -+ ocp_reg_write(tp, 0xb87e, 0xfc32); -+ ocp_reg_write(tp, 0xb87c, 0x803f); -+ ocp_reg_write(tp, 0xb87e, 0x7c13); -+ ocp_reg_write(tp, 0xb87c, 0x8043); -+ ocp_reg_write(tp, 0xb87e, 0x7c13); -+ ocp_reg_write(tp, 0xb87c, 0x8047); -+ ocp_reg_write(tp, 0xb87e, 0x7c13); -+ -+ ocp_reg_write(tp, 0xb87c, 0x8145); -+ ocp_reg_write(tp, 0xb87e, 0x370e); -+ ocp_reg_write(tp, 0xb87c, 0x8157); -+ ocp_reg_write(tp, 0xb87e, 0x770e); -+ ocp_reg_write(tp, 0xb87c, 0x8169); -+ ocp_reg_write(tp, 0xb87e, 0x0d0a); -+ ocp_reg_write(tp, 0xb87c, 0x817b); -+ ocp_reg_write(tp, 0xb87e, 0x1d0a); -+ -+ data = sram_read(tp, 0x8217); -+ data &= ~0xff00; -+ data |= 0x5000; -+ sram_write(tp, 0x8217, data); -+ data = sram_read(tp, 0x821a); -+ data &= ~0xff00; -+ data |= 0x5000; -+ sram_write(tp, 0x821a, data); -+ sram_write(tp, 0x80da, 0x0403); -+ data = sram_read(tp, 0x80dc); -+ data &= ~0xff00; -+ data |= 0x1000; -+ sram_write(tp, 0x80dc, data); -+ sram_write(tp, 0x80b3, 0x0384); -+ sram_write(tp, 0x80b7, 0x2007); -+ data = sram_read(tp, 0x80ba); -+ data &= ~0xff00; -+ data |= 0x6c00; -+ sram_write(tp, 0x80ba, data); -+ sram_write(tp, 0x80b5, 0xf009); -+ data = sram_read(tp, 0x80bd); -+ data &= ~0xff00; -+ data |= 0x9f00; -+ sram_write(tp, 0x80bd, data); -+ sram_write(tp, 0x80c7, 0xf083); -+ sram_write(tp, 0x80dd, 0x03f0); -+ data = sram_read(tp, 0x80df); -+ data &= ~0xff00; -+ data |= 0x1000; -+ sram_write(tp, 0x80df, data); -+ sram_write(tp, 0x80cb, 0x2007); -+ data = sram_read(tp, 0x80ce); -+ data &= ~0xff00; -+ data |= 0x6c00; -+ sram_write(tp, 0x80ce, data); -+ sram_write(tp, 0x80c9, 0x8009); -+ data = sram_read(tp, 0x80d1); -+ data &= ~0xff00; -+ data |= 0x8000; -+ sram_write(tp, 0x80d1, data); -+ sram_write(tp, 0x80a3, 0x200a); -+ sram_write(tp, 0x80a5, 0xf0ad); -+ sram_write(tp, 0x809f, 0x6073); -+ sram_write(tp, 0x80a1, 0x000b); -+ data = sram_read(tp, 0x80a9); -+ data &= ~0xff00; -+ data |= 0xc000; -+ sram_write(tp, 0x80a9, data); -+ -+ if (rtl_phy_patch_request(tp, true, true)) -+ return; -+ -+ data = ocp_reg_read(tp, 0xb896); -+ data &= ~BIT(0); -+ ocp_reg_write(tp, 0xb896, data); -+ data = ocp_reg_read(tp, 0xb892); -+ data &= ~0xff00; -+ ocp_reg_write(tp, 0xb892, data); -+ ocp_reg_write(tp, 0xb88e, 0xc23e); -+ ocp_reg_write(tp, 0xb890, 0x0000); -+ ocp_reg_write(tp, 0xb88e, 0xc240); -+ ocp_reg_write(tp, 0xb890, 0x0103); -+ ocp_reg_write(tp, 0xb88e, 0xc242); -+ ocp_reg_write(tp, 0xb890, 0x0507); -+ ocp_reg_write(tp, 0xb88e, 0xc244); -+ ocp_reg_write(tp, 0xb890, 0x090b); -+ ocp_reg_write(tp, 0xb88e, 0xc246); -+ ocp_reg_write(tp, 0xb890, 0x0c0e); -+ ocp_reg_write(tp, 0xb88e, 0xc248); -+ ocp_reg_write(tp, 0xb890, 0x1012); -+ ocp_reg_write(tp, 0xb88e, 0xc24a); -+ ocp_reg_write(tp, 0xb890, 0x1416); -+ data = ocp_reg_read(tp, 0xb896); -+ data |= BIT(0); -+ ocp_reg_write(tp, 0xb896, data); -+ -+ rtl_phy_patch_request(tp, false, true); -+ -+ data = ocp_reg_read(tp, 0xa86a); -+ data |= BIT(0); -+ ocp_reg_write(tp, 0xa86a, data); -+ data = ocp_reg_read(tp, 0xa6f0); -+ data |= BIT(0); -+ ocp_reg_write(tp, 0xa6f0, data); -+ -+ ocp_reg_write(tp, 0xbfa0, 0xd70d); -+ ocp_reg_write(tp, 0xbfa2, 0x4100); -+ ocp_reg_write(tp, 0xbfa4, 0xe868); -+ ocp_reg_write(tp, 0xbfa6, 0xdc59); -+ ocp_reg_write(tp, 0xb54c, 0x3c18); -+ data = ocp_reg_read(tp, 0xbfa4); -+ data &= ~BIT(5); -+ ocp_reg_write(tp, 0xbfa4, data); -+ data = sram_read(tp, 0x817d); -+ data |= BIT(12); -+ sram_write(tp, 0x817d, data); -+ break; -+ case RTL_VER_13: -+ /* 2.5G INRX */ -+ data = ocp_reg_read(tp, 0xac46); -+ data &= ~0x00f0; -+ data |= 0x0090; -+ ocp_reg_write(tp, 0xac46, data); -+ data = ocp_reg_read(tp, 0xad30); -+ data &= ~0x0003; -+ data |= 0x0001; -+ ocp_reg_write(tp, 0xad30, data); -+ fallthrough; -+ case RTL_VER_15: -+ /* EEE parameter */ -+ ocp_reg_write(tp, 0xb87c, 0x80f5); -+ ocp_reg_write(tp, 0xb87e, 0x760e); -+ ocp_reg_write(tp, 0xb87c, 0x8107); -+ ocp_reg_write(tp, 0xb87e, 0x360e); -+ ocp_reg_write(tp, 0xb87c, 0x8551); -+ data = ocp_reg_read(tp, 0xb87e); -+ data &= ~0xff00; -+ data |= 0x0800; -+ ocp_reg_write(tp, 0xb87e, data); -+ -+ /* ADC_PGA parameter */ -+ data = ocp_reg_read(tp, 0xbf00); -+ data &= ~0xe000; -+ data |= 0xa000; -+ ocp_reg_write(tp, 0xbf00, data); -+ data = ocp_reg_read(tp, 0xbf46); -+ data &= ~0x0f00; -+ data |= 0x0300; -+ ocp_reg_write(tp, 0xbf46, data); -+ -+ /* Green Table-PGA, 1G full viterbi */ -+ sram_write(tp, 0x8044, 0x2417); -+ sram_write(tp, 0x804a, 0x2417); -+ sram_write(tp, 0x8050, 0x2417); -+ sram_write(tp, 0x8056, 0x2417); -+ sram_write(tp, 0x805c, 0x2417); -+ sram_write(tp, 0x8062, 0x2417); -+ sram_write(tp, 0x8068, 0x2417); -+ sram_write(tp, 0x806e, 0x2417); -+ sram_write(tp, 0x8074, 0x2417); -+ sram_write(tp, 0x807a, 0x2417); -+ -+ /* XG PLL */ -+ data = ocp_reg_read(tp, 0xbf84); -+ data &= ~0xe000; -+ data |= 0xa000; -+ ocp_reg_write(tp, 0xbf84, data); -+ break; -+ default: -+ break; -+ } -+ -+ if (rtl_phy_patch_request(tp, true, true)) -+ return; -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4); -+ ocp_data |= EEE_SPDWN_EN; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data); -+ -+ data = ocp_reg_read(tp, OCP_DOWN_SPEED); -+ data &= ~(EN_EEE_100 | EN_EEE_1000); -+ data |= EN_10M_CLKDIV; -+ ocp_reg_write(tp, OCP_DOWN_SPEED, data); -+ tp->ups_info._10m_ckdiv = true; -+ tp->ups_info.eee_plloff_100 = false; -+ tp->ups_info.eee_plloff_giga = false; -+ -+ data = ocp_reg_read(tp, OCP_POWER_CFG); -+ data &= ~EEE_CLKDIV_EN; -+ ocp_reg_write(tp, OCP_POWER_CFG, data); -+ tp->ups_info.eee_ckdiv = false; -+ -+ rtl_phy_patch_request(tp, false, true); -+ -+ rtl_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags)); -+ -+ data = ocp_reg_read(tp, 0xa428); -+ data &= ~BIT(9); -+ ocp_reg_write(tp, 0xa428, data); -+ data = ocp_reg_read(tp, 0xa5ea); -+ data &= ~BIT(0); -+ ocp_reg_write(tp, 0xa5ea, data); -+ tp->ups_info.lite_mode = 0; -+ -+ if (tp->eee_en) -+ rtl_eee_enable(tp, true); -+ -+ r8153_aldps_en(tp, true); -+ r8152b_enable_fc(tp); -+ r8153_u2p3en(tp, true); -+ -+ set_bit(PHY_RESET, &tp->flags); -+} -+ -+static void r8156_init(struct r8152 *tp) -+{ -+ u32 ocp_data; -+ u16 data; -+ int i; -+ -+ if (test_bit(RTL8152_UNPLUG, &tp->flags)) -+ return; -+ -+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_ECM_OP); -+ ocp_data &= ~EN_ALL_SPEED; -+ ocp_write_byte(tp, MCU_TYPE_USB, USB_ECM_OP, ocp_data); -+ -+ ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, 0); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_ECM_OPTION); -+ ocp_data |= BYPASS_MAC_RESET; -+ ocp_write_word(tp, MCU_TYPE_USB, USB_ECM_OPTION, ocp_data); -+ -+ r8153b_u1u2en(tp, false); -+ -+ for (i = 0; i < 500; i++) { -+ if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) & -+ AUTOLOAD_DONE) -+ break; -+ -+ msleep(20); -+ if (test_bit(RTL8152_UNPLUG, &tp->flags)) -+ return; -+ } -+ -+ data = r8153_phy_status(tp, 0); -+ if (data == PHY_STAT_EXT_INIT) { -+ data = ocp_reg_read(tp, 0xa468); -+ data &= ~(BIT(3) | BIT(1)); -+ ocp_reg_write(tp, 0xa468, data); -+ } -+ -+ data = r8152_mdio_read(tp, MII_BMCR); -+ if (data & BMCR_PDOWN) { -+ data &= ~BMCR_PDOWN; -+ r8152_mdio_write(tp, MII_BMCR, data); -+ } -+ -+ data = r8153_phy_status(tp, PHY_STAT_LAN_ON); -+ WARN_ON_ONCE(data != PHY_STAT_LAN_ON); -+ -+ r8153_u2p3en(tp, false); -+ -+ /* MSC timer = 0xfff * 8ms = 32760 ms */ -+ ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff); -+ -+ /* U1/U2/L1 idle timer. 500 us */ -+ ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500); -+ -+ r8153b_power_cut_en(tp, false); -+ r8156_ups_en(tp, false); -+ r8153_queue_wake(tp, false); -+ rtl_runtime_suspend_enable(tp, false); -+ -+ if (tp->udev->speed >= USB_SPEED_SUPER) -+ r8153b_u1u2en(tp, true); -+ -+ usb_enable_lpm(tp->udev); -+ -+ r8156_mac_clk_spd(tp, true); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3); -+ ocp_data &= ~PLA_MCU_SPDWN_EN; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS); -+ if (rtl8152_get_speed(tp) & LINK_STATUS) -+ ocp_data |= CUR_LINK_OK; -+ else -+ ocp_data &= ~CUR_LINK_OK; -+ ocp_data |= POLL_LINK_CHG; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data); -+ -+ set_bit(GREEN_ETHERNET, &tp->flags); -+ -+ /* rx aggregation */ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); -+ ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN); -+ ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); -+ -+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_BMU_CONFIG); -+ ocp_data |= ACT_ODMA; -+ ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_CONFIG, ocp_data); -+ -+ rtl_tally_reset(tp); -+ -+ tp->coalesce = 15000; /* 15 us */ -+} -+ -+static void r8156b_init(struct r8152 *tp) -+{ -+ u32 ocp_data; -+ u16 data; -+ int i; -+ -+ if (test_bit(RTL8152_UNPLUG, &tp->flags)) -+ return; -+ -+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_ECM_OP); -+ ocp_data &= ~EN_ALL_SPEED; -+ ocp_write_byte(tp, MCU_TYPE_USB, USB_ECM_OP, ocp_data); -+ -+ ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, 0); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_ECM_OPTION); -+ ocp_data |= BYPASS_MAC_RESET; -+ ocp_write_word(tp, MCU_TYPE_USB, USB_ECM_OPTION, ocp_data); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL); -+ ocp_data |= RX_DETECT8; -+ ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data); -+ -+ r8153b_u1u2en(tp, false); -+ -+ switch (tp->version) { -+ case RTL_VER_13: -+ case RTL_VER_15: -+ r8156b_wait_loading_flash(tp); -+ break; -+ default: -+ break; -+ } -+ -+ for (i = 0; i < 500; i++) { -+ if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) & -+ AUTOLOAD_DONE) -+ break; -+ -+ msleep(20); -+ if (test_bit(RTL8152_UNPLUG, &tp->flags)) -+ return; -+ } -+ -+ data = r8153_phy_status(tp, 0); -+ if (data == PHY_STAT_EXT_INIT) { -+ data = ocp_reg_read(tp, 0xa468); -+ data &= ~(BIT(3) | BIT(1)); -+ ocp_reg_write(tp, 0xa468, data); -+ -+ data = ocp_reg_read(tp, 0xa466); -+ data &= ~BIT(0); -+ ocp_reg_write(tp, 0xa466, data); -+ } -+ -+ data = r8152_mdio_read(tp, MII_BMCR); -+ if (data & BMCR_PDOWN) { -+ data &= ~BMCR_PDOWN; -+ r8152_mdio_write(tp, MII_BMCR, data); -+ } -+ -+ data = r8153_phy_status(tp, PHY_STAT_LAN_ON); -+ -+ r8153_u2p3en(tp, false); -+ -+ /* MSC timer = 0xfff * 8ms = 32760 ms */ -+ ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff); -+ -+ /* U1/U2/L1 idle timer. 500 us */ -+ ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500); -+ -+ r8153b_power_cut_en(tp, false); -+ r8156_ups_en(tp, false); -+ r8153_queue_wake(tp, false); -+ rtl_runtime_suspend_enable(tp, false); -+ -+ if (tp->udev->speed >= USB_SPEED_SUPER) -+ r8153b_u1u2en(tp, true); -+ -+ usb_enable_lpm(tp->udev); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RCR); -+ ocp_data &= ~SLOT_EN; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR); -+ ocp_data |= FLOW_CTRL_EN; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data); -+ -+ /* enable fc timer and set timer to 600 ms. */ -+ ocp_write_word(tp, MCU_TYPE_USB, USB_FC_TIMER, -+ CTRL_TIMER_EN | (600 / 8)); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL); -+ if (!(ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL) & DACK_DET_EN)) -+ ocp_data |= FLOW_CTRL_PATCH_2; -+ ocp_data &= ~AUTO_SPEEDUP; -+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK); -+ ocp_data |= FC_PATCH_TASK; -+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data); -+ -+ r8156_mac_clk_spd(tp, true); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3); -+ ocp_data &= ~PLA_MCU_SPDWN_EN; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data); -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS); -+ if (rtl8152_get_speed(tp) & LINK_STATUS) -+ ocp_data |= CUR_LINK_OK; -+ else -+ ocp_data &= ~CUR_LINK_OK; -+ ocp_data |= POLL_LINK_CHG; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data); -+ -+ set_bit(GREEN_ETHERNET, &tp->flags); -+ -+ /* rx aggregation */ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); -+ ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN); -+ ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); -+ -+ rtl_tally_reset(tp); -+ -+ tp->coalesce = 15000; /* 15 us */ -+} -+ - static int rtl8152_pre_reset(struct usb_interface *intf) - { - struct r8152 *tp = usb_get_intfdata(intf); -@@ -6015,6 +7947,22 @@ int rtl8152_get_link_ksettings(struct ne - - mii_ethtool_get_link_ksettings(&tp->mii, cmd); - -+ linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, -+ cmd->link_modes.supported, tp->support_2500full); -+ -+ if (tp->support_2500full) { -+ linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, -+ cmd->link_modes.advertising, -+ ocp_reg_read(tp, OCP_10GBT_CTRL) & MDIO_AN_10GBT_CTRL_ADV2_5G); -+ -+ linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, -+ cmd->link_modes.lp_advertising, -+ ocp_reg_read(tp, OCP_10GBT_STAT) & MDIO_AN_10GBT_STAT_LP2_5G); -+ -+ if (is_speed_2500(rtl8152_get_speed(tp))) -+ cmd->base.speed = SPEED_2500; -+ } -+ - mutex_unlock(&tp->control); - - usb_autopm_put_interface(tp->intf); -@@ -6058,6 +8006,10 @@ static int rtl8152_set_link_ksettings(st - cmd->link_modes.advertising)) - advertising |= RTL_ADVERTISED_1000_FULL; - -+ if (test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, -+ cmd->link_modes.advertising)) -+ advertising |= RTL_ADVERTISED_2500_FULL; -+ - mutex_lock(&tp->control); - - ret = rtl8152_set_speed(tp, cmd->base.autoneg, cmd->base.speed, -@@ -6647,6 +8599,67 @@ static int rtl_ops_init(struct r8152 *tp - tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX; - break; - -+ case RTL_VER_11: -+ tp->eee_en = true; -+ tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX; -+ fallthrough; -+ case RTL_VER_10: -+ ops->init = r8156_init; -+ ops->enable = rtl8156_enable; -+ ops->disable = rtl8153_disable; -+ ops->up = rtl8156_up; -+ ops->down = rtl8156_down; -+ ops->unload = rtl8153_unload; -+ ops->eee_get = r8153_get_eee; -+ ops->eee_set = r8152_set_eee; -+ ops->in_nway = rtl8153_in_nway; -+ ops->hw_phy_cfg = r8156_hw_phy_cfg; -+ ops->autosuspend_en = rtl8156_runtime_enable; -+ ops->change_mtu = rtl8156_change_mtu; -+ tp->rx_buf_sz = 48 * 1024; -+ tp->support_2500full = 1; -+ break; -+ -+ case RTL_VER_12: -+ case RTL_VER_13: -+ tp->support_2500full = 1; -+ fallthrough; -+ case RTL_VER_15: -+ tp->eee_en = true; -+ tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX; -+ ops->init = r8156b_init; -+ ops->enable = rtl8156b_enable; -+ ops->disable = rtl8153_disable; -+ ops->up = rtl8156_up; -+ ops->down = rtl8156_down; -+ ops->unload = rtl8153_unload; -+ ops->eee_get = r8153_get_eee; -+ ops->eee_set = r8152_set_eee; -+ ops->in_nway = rtl8153_in_nway; -+ ops->hw_phy_cfg = r8156b_hw_phy_cfg; -+ ops->autosuspend_en = rtl8156_runtime_enable; -+ ops->change_mtu = rtl8156_change_mtu; -+ tp->rx_buf_sz = 48 * 1024; -+ break; -+ -+ case RTL_VER_14: -+ ops->init = r8153c_init; -+ ops->enable = rtl8153_enable; -+ ops->disable = rtl8153_disable; -+ ops->up = rtl8153c_up; -+ ops->down = rtl8153b_down; -+ ops->unload = rtl8153_unload; -+ ops->eee_get = r8153_get_eee; -+ ops->eee_set = r8152_set_eee; -+ ops->in_nway = rtl8153_in_nway; -+ ops->hw_phy_cfg = r8153c_hw_phy_cfg; -+ ops->autosuspend_en = rtl8153c_runtime_enable; -+ ops->change_mtu = rtl8153c_change_mtu; -+ tp->rx_buf_sz = 32 * 1024; -+ tp->eee_en = true; -+ tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX; -+ break; -+ - default: - ret = -ENODEV; - dev_err(&tp->intf->dev, "Unknown Device\n"); -@@ -6660,11 +8673,13 @@ static int rtl_ops_init(struct r8152 *tp - #define FIRMWARE_8153A_3 "rtl_nic/rtl8153a-3.fw" - #define FIRMWARE_8153A_4 "rtl_nic/rtl8153a-4.fw" - #define FIRMWARE_8153B_2 "rtl_nic/rtl8153b-2.fw" -+#define FIRMWARE_8153C_1 "rtl_nic/rtl8153c-1.fw" - - MODULE_FIRMWARE(FIRMWARE_8153A_2); - MODULE_FIRMWARE(FIRMWARE_8153A_3); - MODULE_FIRMWARE(FIRMWARE_8153A_4); - MODULE_FIRMWARE(FIRMWARE_8153B_2); -+MODULE_FIRMWARE(FIRMWARE_8153C_1); - - static int rtl_fw_init(struct r8152 *tp) - { -@@ -6690,6 +8705,11 @@ static int rtl_fw_init(struct r8152 *tp) - rtl_fw->pre_fw = r8153b_pre_firmware_1; - rtl_fw->post_fw = r8153b_post_firmware_1; - break; -+ case RTL_VER_14: -+ rtl_fw->fw_name = FIRMWARE_8153C_1; -+ rtl_fw->pre_fw = r8153b_pre_firmware_1; -+ rtl_fw->post_fw = r8153c_post_firmware_1; -+ break; - default: - break; - } -@@ -6745,6 +8765,27 @@ u8 rtl8152_get_version(struct usb_interf - case 0x6010: - version = RTL_VER_09; - break; -+ case 0x7010: -+ version = RTL_TEST_01; -+ break; -+ case 0x7020: -+ version = RTL_VER_10; -+ break; -+ case 0x7030: -+ version = RTL_VER_11; -+ break; -+ case 0x7400: -+ version = RTL_VER_12; -+ break; -+ case 0x7410: -+ version = RTL_VER_13; -+ break; -+ case 0x6400: -+ version = RTL_VER_14; -+ break; -+ case 0x7420: -+ version = RTL_VER_15; -+ break; - default: - version = RTL_VER_UNKNOWN; - dev_info(&intf->dev, "Unknown version 0x%04x\n", ocp_data); -@@ -6857,12 +8898,29 @@ static int rtl8152_probe(struct usb_inte - /* MTU range: 68 - 1500 or 9194 */ - netdev->min_mtu = ETH_MIN_MTU; - switch (tp->version) { -+ case RTL_VER_03: -+ case RTL_VER_04: -+ case RTL_VER_05: -+ case RTL_VER_06: -+ case RTL_VER_08: -+ case RTL_VER_09: -+ case RTL_VER_14: -+ netdev->max_mtu = size_to_mtu(9 * 1024); -+ break; -+ case RTL_VER_10: -+ case RTL_VER_11: -+ netdev->max_mtu = size_to_mtu(15 * 1024); -+ break; -+ case RTL_VER_12: -+ case RTL_VER_13: -+ case RTL_VER_15: -+ netdev->max_mtu = size_to_mtu(16 * 1024); -+ break; - case RTL_VER_01: - case RTL_VER_02: -- netdev->max_mtu = ETH_DATA_LEN; -- break; -+ case RTL_VER_07: - default: -- netdev->max_mtu = size_to_mtu(9 * 1024); -+ netdev->max_mtu = ETH_DATA_LEN; - break; - } - -@@ -6878,7 +8936,13 @@ static int rtl8152_probe(struct usb_inte - tp->advertising = RTL_ADVERTISED_10_HALF | RTL_ADVERTISED_10_FULL | - RTL_ADVERTISED_100_HALF | RTL_ADVERTISED_100_FULL; - if (tp->mii.supports_gmii) { -- tp->speed = SPEED_1000; -+ if (tp->support_2500full && -+ tp->udev->speed >= USB_SPEED_SUPER) { -+ tp->speed = SPEED_2500; -+ tp->advertising |= RTL_ADVERTISED_2500_FULL; -+ } else { -+ tp->speed = SPEED_1000; -+ } - tp->advertising |= RTL_ADVERTISED_1000_FULL; - } - tp->duplex = DUPLEX_FULL; -@@ -6902,7 +8966,11 @@ static int rtl8152_probe(struct usb_inte - set_ethernet_addr(tp); - - usb_set_intfdata(intf, tp); -- netif_napi_add(netdev, &tp->napi, r8152_poll, RTL8152_NAPI_WEIGHT); -+ -+ if (tp->support_2500full) -+ netif_napi_add(netdev, &tp->napi, r8152_poll, 256); -+ else -+ netif_napi_add(netdev, &tp->napi, r8152_poll, 64); - - ret = register_netdev(netdev); - if (ret != 0) { -@@ -6938,7 +9006,8 @@ static void rtl8152_disconnect(struct us - unregister_netdev(tp->netdev); - tasklet_kill(&tp->tx_tl); - cancel_delayed_work_sync(&tp->hw_phy_work); -- tp->rtl_ops.unload(tp); -+ if (tp->rtl_ops.unload) -+ tp->rtl_ops.unload(tp); - rtl8152_release_firmware(tp); - free_netdev(tp->netdev); - } -@@ -6958,13 +9027,28 @@ static void rtl8152_disconnect(struct us - .idProduct = (prod), \ - .bInterfaceClass = USB_CLASS_COMM, \ - .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \ -+ .bInterfaceProtocol = USB_CDC_PROTO_NONE \ -+}, \ -+{ \ -+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | \ -+ USB_DEVICE_ID_MATCH_DEVICE, \ -+ .idVendor = (vend), \ -+ .idProduct = (prod), \ -+ .bInterfaceClass = USB_CLASS_COMM, \ -+ .bInterfaceSubClass = USB_CDC_SUBCLASS_NCM, \ - .bInterfaceProtocol = USB_CDC_PROTO_NONE - - /* table of devices that work with this driver */ - static const struct usb_device_id rtl8152_table[] = { -+ /* Realtek */ - {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8050)}, -+ {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8053)}, - {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8152)}, - {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8153)}, -+ {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8155)}, -+ {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8156)}, -+ -+ /* Microsoft */ - {REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07ab)}, - {REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07c6)}, - {REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x0927)}, diff --git a/target/linux/bcm27xx/patches-5.10/950-0556-r8152-support-PHY-firmware-for-RTL8156-series.patch b/target/linux/bcm27xx/patches-5.10/950-0556-r8152-support-PHY-firmware-for-RTL8156-series.patch deleted file mode 100644 index 943c821b82..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0556-r8152-support-PHY-firmware-for-RTL8156-series.patch +++ /dev/null @@ -1,691 +0,0 @@ -From ca09589a72a0aa17389754fb75a5cd1a5d46818f Mon Sep 17 00:00:00 2001 -From: Hayes Wang <hayeswang@realtek.com> -Date: Fri, 16 Apr 2021 16:04:36 +0800 -Subject: [PATCH] r8152: support PHY firmware for RTL8156 series - -commit 4a51b0e8a0143b0e83d51d9c58c6416c3818a9f2 upstream. - -Support new firmware type and method for RTL8156 series. - -Signed-off-by: Hayes Wang <hayeswang@realtek.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/usb/r8152.c | 563 +++++++++++++++++++++++++++++++++++++++- - 1 file changed, 561 insertions(+), 2 deletions(-) - ---- a/drivers/net/usb/r8152.c -+++ b/drivers/net/usb/r8152.c -@@ -975,8 +975,60 @@ enum rtl8152_fw_flags { - FW_FLAGS_START, - FW_FLAGS_STOP, - FW_FLAGS_NC, -+ FW_FLAGS_NC1, -+ FW_FLAGS_NC2, -+ FW_FLAGS_UC2, -+ FW_FLAGS_UC, -+ FW_FLAGS_SPEED_UP, -+ FW_FLAGS_VER, - }; - -+enum rtl8152_fw_fixup_cmd { -+ FW_FIXUP_AND = 0, -+ FW_FIXUP_OR, -+ FW_FIXUP_NOT, -+ FW_FIXUP_XOR, -+}; -+ -+struct fw_phy_set { -+ __le16 addr; -+ __le16 data; -+} __packed; -+ -+struct fw_phy_speed_up { -+ struct fw_block blk_hdr; -+ __le16 fw_offset; -+ __le16 version; -+ __le16 fw_reg; -+ __le16 reserved; -+ char info[]; -+} __packed; -+ -+struct fw_phy_ver { -+ struct fw_block blk_hdr; -+ struct fw_phy_set ver; -+ __le32 reserved; -+} __packed; -+ -+struct fw_phy_fixup { -+ struct fw_block blk_hdr; -+ struct fw_phy_set setting; -+ __le16 bit_cmd; -+ __le16 reserved; -+} __packed; -+ -+struct fw_phy_union { -+ struct fw_block blk_hdr; -+ __le16 fw_offset; -+ __le16 fw_reg; -+ struct fw_phy_set pre_set[2]; -+ struct fw_phy_set bp[8]; -+ struct fw_phy_set bp_en; -+ u8 pre_num; -+ u8 bp_num; -+ char info[]; -+} __packed; -+ - /** - * struct fw_mac - a firmware block used by RTL_FW_PLA and RTL_FW_USB. - * The layout of the firmware block is: -@@ -1081,6 +1133,15 @@ enum rtl_fw_type { - RTL_FW_PHY_START, - RTL_FW_PHY_STOP, - RTL_FW_PHY_NC, -+ RTL_FW_PHY_FIXUP, -+ RTL_FW_PHY_UNION_NC, -+ RTL_FW_PHY_UNION_NC1, -+ RTL_FW_PHY_UNION_NC2, -+ RTL_FW_PHY_UNION_UC2, -+ RTL_FW_PHY_UNION_UC, -+ RTL_FW_PHY_UNION_MISC, -+ RTL_FW_PHY_SPEED_UP, -+ RTL_FW_PHY_VER, - }; - - enum rtl_version { -@@ -4000,6 +4061,162 @@ static int rtl_post_ram_code(struct r815 - return 0; - } - -+static bool rtl8152_is_fw_phy_speed_up_ok(struct r8152 *tp, struct fw_phy_speed_up *phy) -+{ -+ u16 fw_offset; -+ u32 length; -+ bool rc = false; -+ -+ switch (tp->version) { -+ case RTL_VER_01: -+ case RTL_VER_02: -+ case RTL_VER_03: -+ case RTL_VER_04: -+ case RTL_VER_05: -+ case RTL_VER_06: -+ case RTL_VER_07: -+ case RTL_VER_08: -+ case RTL_VER_09: -+ case RTL_VER_10: -+ case RTL_VER_11: -+ case RTL_VER_12: -+ case RTL_VER_14: -+ goto out; -+ case RTL_VER_13: -+ case RTL_VER_15: -+ default: -+ break; -+ } -+ -+ fw_offset = __le16_to_cpu(phy->fw_offset); -+ length = __le32_to_cpu(phy->blk_hdr.length); -+ if (fw_offset < sizeof(*phy) || length <= fw_offset) { -+ dev_err(&tp->intf->dev, "invalid fw_offset\n"); -+ goto out; -+ } -+ -+ length -= fw_offset; -+ if (length & 3) { -+ dev_err(&tp->intf->dev, "invalid block length\n"); -+ goto out; -+ } -+ -+ if (__le16_to_cpu(phy->fw_reg) != 0x9A00) { -+ dev_err(&tp->intf->dev, "invalid register to load firmware\n"); -+ goto out; -+ } -+ -+ rc = true; -+out: -+ return rc; -+} -+ -+static bool rtl8152_is_fw_phy_ver_ok(struct r8152 *tp, struct fw_phy_ver *ver) -+{ -+ bool rc = false; -+ -+ switch (tp->version) { -+ case RTL_VER_10: -+ case RTL_VER_11: -+ case RTL_VER_12: -+ case RTL_VER_13: -+ case RTL_VER_15: -+ break; -+ default: -+ goto out; -+ } -+ -+ if (__le32_to_cpu(ver->blk_hdr.length) != sizeof(*ver)) { -+ dev_err(&tp->intf->dev, "invalid block length\n"); -+ goto out; -+ } -+ -+ if (__le16_to_cpu(ver->ver.addr) != SRAM_GPHY_FW_VER) { -+ dev_err(&tp->intf->dev, "invalid phy ver addr\n"); -+ goto out; -+ } -+ -+ rc = true; -+out: -+ return rc; -+} -+ -+static bool rtl8152_is_fw_phy_fixup_ok(struct r8152 *tp, struct fw_phy_fixup *fix) -+{ -+ bool rc = false; -+ -+ switch (tp->version) { -+ case RTL_VER_10: -+ case RTL_VER_11: -+ case RTL_VER_12: -+ case RTL_VER_13: -+ case RTL_VER_15: -+ break; -+ default: -+ goto out; -+ } -+ -+ if (__le32_to_cpu(fix->blk_hdr.length) != sizeof(*fix)) { -+ dev_err(&tp->intf->dev, "invalid block length\n"); -+ goto out; -+ } -+ -+ if (__le16_to_cpu(fix->setting.addr) != OCP_PHY_PATCH_CMD || -+ __le16_to_cpu(fix->setting.data) != BIT(7)) { -+ dev_err(&tp->intf->dev, "invalid phy fixup\n"); -+ goto out; -+ } -+ -+ rc = true; -+out: -+ return rc; -+} -+ -+static bool rtl8152_is_fw_phy_union_ok(struct r8152 *tp, struct fw_phy_union *phy) -+{ -+ u16 fw_offset; -+ u32 length; -+ bool rc = false; -+ -+ switch (tp->version) { -+ case RTL_VER_10: -+ case RTL_VER_11: -+ case RTL_VER_12: -+ case RTL_VER_13: -+ case RTL_VER_15: -+ break; -+ default: -+ goto out; -+ } -+ -+ fw_offset = __le16_to_cpu(phy->fw_offset); -+ length = __le32_to_cpu(phy->blk_hdr.length); -+ if (fw_offset < sizeof(*phy) || length <= fw_offset) { -+ dev_err(&tp->intf->dev, "invalid fw_offset\n"); -+ goto out; -+ } -+ -+ length -= fw_offset; -+ if (length & 1) { -+ dev_err(&tp->intf->dev, "invalid block length\n"); -+ goto out; -+ } -+ -+ if (phy->pre_num > 2) { -+ dev_err(&tp->intf->dev, "invalid pre_num %d\n", phy->pre_num); -+ goto out; -+ } -+ -+ if (phy->bp_num > 8) { -+ dev_err(&tp->intf->dev, "invalid bp_num %d\n", phy->bp_num); -+ goto out; -+ } -+ -+ rc = true; -+out: -+ return rc; -+} -+ - static bool rtl8152_is_fw_phy_nc_ok(struct r8152 *tp, struct fw_phy_nc *phy) - { - u32 length; -@@ -4320,6 +4537,10 @@ static long rtl8152_check_firmware(struc - case RTL_FW_PHY_START: - if (test_bit(FW_FLAGS_START, &fw_flags) || - test_bit(FW_FLAGS_NC, &fw_flags) || -+ test_bit(FW_FLAGS_NC1, &fw_flags) || -+ test_bit(FW_FLAGS_NC2, &fw_flags) || -+ test_bit(FW_FLAGS_UC2, &fw_flags) || -+ test_bit(FW_FLAGS_UC, &fw_flags) || - test_bit(FW_FLAGS_STOP, &fw_flags)) { - dev_err(&tp->intf->dev, - "check PHY_START fail\n"); -@@ -4368,7 +4589,153 @@ static long rtl8152_check_firmware(struc - goto fail; - } - __set_bit(FW_FLAGS_NC, &fw_flags); -+ break; -+ case RTL_FW_PHY_UNION_NC: -+ if (!test_bit(FW_FLAGS_START, &fw_flags) || -+ test_bit(FW_FLAGS_NC1, &fw_flags) || -+ test_bit(FW_FLAGS_NC2, &fw_flags) || -+ test_bit(FW_FLAGS_UC2, &fw_flags) || -+ test_bit(FW_FLAGS_UC, &fw_flags) || -+ test_bit(FW_FLAGS_STOP, &fw_flags)) { -+ dev_err(&tp->intf->dev, "PHY_UNION_NC out of order\n"); -+ goto fail; -+ } -+ -+ if (test_bit(FW_FLAGS_NC, &fw_flags)) { -+ dev_err(&tp->intf->dev, "multiple PHY_UNION_NC encountered\n"); -+ goto fail; -+ } - -+ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) { -+ dev_err(&tp->intf->dev, "check PHY_UNION_NC failed\n"); -+ goto fail; -+ } -+ __set_bit(FW_FLAGS_NC, &fw_flags); -+ break; -+ case RTL_FW_PHY_UNION_NC1: -+ if (!test_bit(FW_FLAGS_START, &fw_flags) || -+ test_bit(FW_FLAGS_NC2, &fw_flags) || -+ test_bit(FW_FLAGS_UC2, &fw_flags) || -+ test_bit(FW_FLAGS_UC, &fw_flags) || -+ test_bit(FW_FLAGS_STOP, &fw_flags)) { -+ dev_err(&tp->intf->dev, "PHY_UNION_NC1 out of order\n"); -+ goto fail; -+ } -+ -+ if (test_bit(FW_FLAGS_NC1, &fw_flags)) { -+ dev_err(&tp->intf->dev, "multiple PHY NC1 encountered\n"); -+ goto fail; -+ } -+ -+ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) { -+ dev_err(&tp->intf->dev, "check PHY_UNION_NC1 failed\n"); -+ goto fail; -+ } -+ __set_bit(FW_FLAGS_NC1, &fw_flags); -+ break; -+ case RTL_FW_PHY_UNION_NC2: -+ if (!test_bit(FW_FLAGS_START, &fw_flags) || -+ test_bit(FW_FLAGS_UC2, &fw_flags) || -+ test_bit(FW_FLAGS_UC, &fw_flags) || -+ test_bit(FW_FLAGS_STOP, &fw_flags)) { -+ dev_err(&tp->intf->dev, "PHY_UNION_NC2 out of order\n"); -+ goto fail; -+ } -+ -+ if (test_bit(FW_FLAGS_NC2, &fw_flags)) { -+ dev_err(&tp->intf->dev, "multiple PHY NC2 encountered\n"); -+ goto fail; -+ } -+ -+ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) { -+ dev_err(&tp->intf->dev, "check PHY_UNION_NC2 failed\n"); -+ goto fail; -+ } -+ __set_bit(FW_FLAGS_NC2, &fw_flags); -+ break; -+ case RTL_FW_PHY_UNION_UC2: -+ if (!test_bit(FW_FLAGS_START, &fw_flags) || -+ test_bit(FW_FLAGS_UC, &fw_flags) || -+ test_bit(FW_FLAGS_STOP, &fw_flags)) { -+ dev_err(&tp->intf->dev, "PHY_UNION_UC2 out of order\n"); -+ goto fail; -+ } -+ -+ if (test_bit(FW_FLAGS_UC2, &fw_flags)) { -+ dev_err(&tp->intf->dev, "multiple PHY UC2 encountered\n"); -+ goto fail; -+ } -+ -+ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) { -+ dev_err(&tp->intf->dev, "check PHY_UNION_UC2 failed\n"); -+ goto fail; -+ } -+ __set_bit(FW_FLAGS_UC2, &fw_flags); -+ break; -+ case RTL_FW_PHY_UNION_UC: -+ if (!test_bit(FW_FLAGS_START, &fw_flags) || -+ test_bit(FW_FLAGS_STOP, &fw_flags)) { -+ dev_err(&tp->intf->dev, "PHY_UNION_UC out of order\n"); -+ goto fail; -+ } -+ -+ if (test_bit(FW_FLAGS_UC, &fw_flags)) { -+ dev_err(&tp->intf->dev, "multiple PHY UC encountered\n"); -+ goto fail; -+ } -+ -+ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) { -+ dev_err(&tp->intf->dev, "check PHY_UNION_UC failed\n"); -+ goto fail; -+ } -+ __set_bit(FW_FLAGS_UC, &fw_flags); -+ break; -+ case RTL_FW_PHY_UNION_MISC: -+ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) { -+ dev_err(&tp->intf->dev, "check RTL_FW_PHY_UNION_MISC failed\n"); -+ goto fail; -+ } -+ break; -+ case RTL_FW_PHY_FIXUP: -+ if (!rtl8152_is_fw_phy_fixup_ok(tp, (struct fw_phy_fixup *)block)) { -+ dev_err(&tp->intf->dev, "check PHY fixup failed\n"); -+ goto fail; -+ } -+ break; -+ case RTL_FW_PHY_SPEED_UP: -+ if (test_bit(FW_FLAGS_SPEED_UP, &fw_flags)) { -+ dev_err(&tp->intf->dev, "multiple PHY firmware encountered"); -+ goto fail; -+ } -+ -+ if (!rtl8152_is_fw_phy_speed_up_ok(tp, (struct fw_phy_speed_up *)block)) { -+ dev_err(&tp->intf->dev, "check PHY speed up failed\n"); -+ goto fail; -+ } -+ __set_bit(FW_FLAGS_SPEED_UP, &fw_flags); -+ break; -+ case RTL_FW_PHY_VER: -+ if (test_bit(FW_FLAGS_START, &fw_flags) || -+ test_bit(FW_FLAGS_NC, &fw_flags) || -+ test_bit(FW_FLAGS_NC1, &fw_flags) || -+ test_bit(FW_FLAGS_NC2, &fw_flags) || -+ test_bit(FW_FLAGS_UC2, &fw_flags) || -+ test_bit(FW_FLAGS_UC, &fw_flags) || -+ test_bit(FW_FLAGS_STOP, &fw_flags)) { -+ dev_err(&tp->intf->dev, "Invalid order to set PHY version\n"); -+ goto fail; -+ } -+ -+ if (test_bit(FW_FLAGS_VER, &fw_flags)) { -+ dev_err(&tp->intf->dev, "multiple PHY version encountered"); -+ goto fail; -+ } -+ -+ if (!rtl8152_is_fw_phy_ver_ok(tp, (struct fw_phy_ver *)block)) { -+ dev_err(&tp->intf->dev, "check PHY version failed\n"); -+ goto fail; -+ } -+ __set_bit(FW_FLAGS_VER, &fw_flags); - break; - default: - dev_warn(&tp->intf->dev, "Unknown type %u is found\n", -@@ -4391,6 +4758,143 @@ fail: - return ret; - } - -+static void rtl_ram_code_speed_up(struct r8152 *tp, struct fw_phy_speed_up *phy, bool wait) -+{ -+ u32 len; -+ u8 *data; -+ -+ if (sram_read(tp, SRAM_GPHY_FW_VER) >= __le16_to_cpu(phy->version)) { -+ dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n"); -+ return; -+ } -+ -+ len = __le32_to_cpu(phy->blk_hdr.length); -+ len -= __le16_to_cpu(phy->fw_offset); -+ data = (u8 *)phy + __le16_to_cpu(phy->fw_offset); -+ -+ if (rtl_phy_patch_request(tp, true, wait)) -+ return; -+ -+ while (len) { -+ u32 ocp_data, size; -+ int i; -+ -+ if (len < 2048) -+ size = len; -+ else -+ size = 2048; -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL); -+ ocp_data |= GPHY_PATCH_DONE | BACKUP_RESTRORE; -+ ocp_write_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL, ocp_data); -+ -+ generic_ocp_write(tp, __le16_to_cpu(phy->fw_reg), 0xff, size, data, MCU_TYPE_USB); -+ -+ data += size; -+ len -= size; -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL); -+ ocp_data |= POL_GPHY_PATCH; -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL, ocp_data); -+ -+ for (i = 0; i < 1000; i++) { -+ if (!(ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL) & POL_GPHY_PATCH)) -+ break; -+ } -+ -+ if (i == 1000) { -+ dev_err(&tp->intf->dev, "ram code speedup mode timeout\n"); -+ return; -+ } -+ } -+ -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base); -+ rtl_phy_patch_request(tp, false, wait); -+ -+ if (sram_read(tp, SRAM_GPHY_FW_VER) == __le16_to_cpu(phy->version)) -+ dev_dbg(&tp->intf->dev, "successfully applied %s\n", phy->info); -+ else -+ dev_err(&tp->intf->dev, "ram code speedup mode fail\n"); -+} -+ -+static int rtl8152_fw_phy_ver(struct r8152 *tp, struct fw_phy_ver *phy_ver) -+{ -+ u16 ver_addr, ver; -+ -+ ver_addr = __le16_to_cpu(phy_ver->ver.addr); -+ ver = __le16_to_cpu(phy_ver->ver.data); -+ -+ if (sram_read(tp, ver_addr) >= ver) { -+ dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n"); -+ return 0; -+ } -+ -+ sram_write(tp, ver_addr, ver); -+ -+ dev_dbg(&tp->intf->dev, "PHY firmware version %x\n", ver); -+ -+ return ver; -+} -+ -+static void rtl8152_fw_phy_fixup(struct r8152 *tp, struct fw_phy_fixup *fix) -+{ -+ u16 addr, data; -+ -+ addr = __le16_to_cpu(fix->setting.addr); -+ data = ocp_reg_read(tp, addr); -+ -+ switch (__le16_to_cpu(fix->bit_cmd)) { -+ case FW_FIXUP_AND: -+ data &= __le16_to_cpu(fix->setting.data); -+ break; -+ case FW_FIXUP_OR: -+ data |= __le16_to_cpu(fix->setting.data); -+ break; -+ case FW_FIXUP_NOT: -+ data &= ~__le16_to_cpu(fix->setting.data); -+ break; -+ case FW_FIXUP_XOR: -+ data ^= __le16_to_cpu(fix->setting.data); -+ break; -+ default: -+ return; -+ } -+ -+ ocp_reg_write(tp, addr, data); -+ -+ dev_dbg(&tp->intf->dev, "applied ocp %x %x\n", addr, data); -+} -+ -+static void rtl8152_fw_phy_union_apply(struct r8152 *tp, struct fw_phy_union *phy) -+{ -+ __le16 *data; -+ u32 length; -+ int i, num; -+ -+ num = phy->pre_num; -+ for (i = 0; i < num; i++) -+ sram_write(tp, __le16_to_cpu(phy->pre_set[i].addr), -+ __le16_to_cpu(phy->pre_set[i].data)); -+ -+ length = __le32_to_cpu(phy->blk_hdr.length); -+ length -= __le16_to_cpu(phy->fw_offset); -+ num = length / 2; -+ data = (__le16 *)((u8 *)phy + __le16_to_cpu(phy->fw_offset)); -+ -+ ocp_reg_write(tp, OCP_SRAM_ADDR, __le16_to_cpu(phy->fw_reg)); -+ for (i = 0; i < num; i++) -+ ocp_reg_write(tp, OCP_SRAM_DATA, __le16_to_cpu(data[i])); -+ -+ num = phy->bp_num; -+ for (i = 0; i < num; i++) -+ sram_write(tp, __le16_to_cpu(phy->bp[i].addr), __le16_to_cpu(phy->bp[i].data)); -+ -+ if (phy->bp_num && phy->bp_en.addr) -+ sram_write(tp, __le16_to_cpu(phy->bp_en.addr), __le16_to_cpu(phy->bp_en.data)); -+ -+ dev_dbg(&tp->intf->dev, "successfully applied %s\n", phy->info); -+} -+ - static void rtl8152_fw_phy_nc_apply(struct r8152 *tp, struct fw_phy_nc *phy) - { - u16 mode_reg, bp_index; -@@ -4444,6 +4948,12 @@ static void rtl8152_fw_mac_apply(struct - return; - } - -+ fw_ver_reg = __le16_to_cpu(mac->fw_ver_reg); -+ if (fw_ver_reg && ocp_read_byte(tp, MCU_TYPE_USB, fw_ver_reg) >= mac->fw_ver_data) { -+ dev_dbg(&tp->intf->dev, "%s firmware has been the newest\n", type ? "PLA" : "USB"); -+ return; -+ } -+ - rtl_clear_bp(tp, type); - - /* Enable backup/restore of MACDBG. This is required after clearing PLA -@@ -4479,7 +4989,6 @@ static void rtl8152_fw_mac_apply(struct - ocp_write_word(tp, type, bp_en_addr, - __le16_to_cpu(mac->bp_en_value)); - -- fw_ver_reg = __le16_to_cpu(mac->fw_ver_reg); - if (fw_ver_reg) - ocp_write_byte(tp, MCU_TYPE_USB, fw_ver_reg, - mac->fw_ver_data); -@@ -4494,7 +5003,7 @@ static void rtl8152_apply_firmware(struc - struct fw_header *fw_hdr; - struct fw_phy_patch_key *key; - u16 key_addr = 0; -- int i; -+ int i, patch_phy = 1; - - if (IS_ERR_OR_NULL(rtl_fw->fw)) - return; -@@ -4516,17 +5025,40 @@ static void rtl8152_apply_firmware(struc - rtl8152_fw_mac_apply(tp, (struct fw_mac *)block); - break; - case RTL_FW_PHY_START: -+ if (!patch_phy) -+ break; - key = (struct fw_phy_patch_key *)block; - key_addr = __le16_to_cpu(key->key_reg); - rtl_pre_ram_code(tp, key_addr, __le16_to_cpu(key->key_data), !power_cut); - break; - case RTL_FW_PHY_STOP: -+ if (!patch_phy) -+ break; - WARN_ON(!key_addr); - rtl_post_ram_code(tp, key_addr, !power_cut); - break; - case RTL_FW_PHY_NC: - rtl8152_fw_phy_nc_apply(tp, (struct fw_phy_nc *)block); - break; -+ case RTL_FW_PHY_VER: -+ patch_phy = rtl8152_fw_phy_ver(tp, (struct fw_phy_ver *)block); -+ break; -+ case RTL_FW_PHY_UNION_NC: -+ case RTL_FW_PHY_UNION_NC1: -+ case RTL_FW_PHY_UNION_NC2: -+ case RTL_FW_PHY_UNION_UC2: -+ case RTL_FW_PHY_UNION_UC: -+ case RTL_FW_PHY_UNION_MISC: -+ if (patch_phy) -+ rtl8152_fw_phy_union_apply(tp, (struct fw_phy_union *)block); -+ break; -+ case RTL_FW_PHY_FIXUP: -+ if (patch_phy) -+ rtl8152_fw_phy_fixup(tp, (struct fw_phy_fixup *)block); -+ break; -+ case RTL_FW_PHY_SPEED_UP: -+ rtl_ram_code_speed_up(tp, (struct fw_phy_speed_up *)block, !power_cut); -+ break; - default: - break; - } -@@ -5034,6 +5566,21 @@ static int r8153c_post_firmware_1(struct - return 0; - } - -+static int r8156a_post_firmware_1(struct r8152 *tp) -+{ -+ u32 ocp_data; -+ -+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1); -+ ocp_data |= FW_IP_RESET_EN; -+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data); -+ -+ /* Modify U3PHY parameter for compatibility issue */ -+ ocp_write_dword(tp, MCU_TYPE_USB, USB_UPHY3_MDCMDIO, 0x4026840e); -+ ocp_write_dword(tp, MCU_TYPE_USB, USB_UPHY3_MDCMDIO, 0x4001acc9); -+ -+ return 0; -+} -+ - static void r8153_aldps_en(struct r8152 *tp, bool enable) - { - u16 data; -@@ -8674,12 +9221,16 @@ static int rtl_ops_init(struct r8152 *tp - #define FIRMWARE_8153A_4 "rtl_nic/rtl8153a-4.fw" - #define FIRMWARE_8153B_2 "rtl_nic/rtl8153b-2.fw" - #define FIRMWARE_8153C_1 "rtl_nic/rtl8153c-1.fw" -+#define FIRMWARE_8156A_2 "rtl_nic/rtl8156a-2.fw" -+#define FIRMWARE_8156B_2 "rtl_nic/rtl8156b-2.fw" - - MODULE_FIRMWARE(FIRMWARE_8153A_2); - MODULE_FIRMWARE(FIRMWARE_8153A_3); - MODULE_FIRMWARE(FIRMWARE_8153A_4); - MODULE_FIRMWARE(FIRMWARE_8153B_2); - MODULE_FIRMWARE(FIRMWARE_8153C_1); -+MODULE_FIRMWARE(FIRMWARE_8156A_2); -+MODULE_FIRMWARE(FIRMWARE_8156B_2); - - static int rtl_fw_init(struct r8152 *tp) - { -@@ -8705,6 +9256,14 @@ static int rtl_fw_init(struct r8152 *tp) - rtl_fw->pre_fw = r8153b_pre_firmware_1; - rtl_fw->post_fw = r8153b_post_firmware_1; - break; -+ case RTL_VER_11: -+ rtl_fw->fw_name = FIRMWARE_8156A_2; -+ rtl_fw->post_fw = r8156a_post_firmware_1; -+ break; -+ case RTL_VER_13: -+ case RTL_VER_15: -+ rtl_fw->fw_name = FIRMWARE_8156B_2; -+ break; - case RTL_VER_14: - rtl_fw->fw_name = FIRMWARE_8153C_1; - rtl_fw->pre_fw = r8153b_pre_firmware_1; diff --git a/target/linux/bcm27xx/patches-5.10/950-0557-r8152-search-the-configuration-of-vendor-mode.patch b/target/linux/bcm27xx/patches-5.10/950-0557-r8152-search-the-configuration-of-vendor-mode.patch deleted file mode 100644 index 9ce0e778cf..0000000000 --- a/target/linux/bcm27xx/patches-5.10/950-0557-r8152-search-the-configuration-of-vendor-mode.patch +++ /dev/null @@ -1,79 +0,0 @@ -From 579f58dd2819910354753bc5489fc1588fe9cfe2 Mon Sep 17 00:00:00 2001 -From: Hayes Wang <hayeswang@realtek.com> -Date: Fri, 16 Apr 2021 16:04:37 +0800 -Subject: [PATCH] r8152: search the configuration of vendor mode - -commit c2198943e33b100ed21dfb636c8fa6baef841e9d upstream. - -The vendor mode is not always at config #1, so it is necessary to -set the correct configuration number. - -Signed-off-by: Hayes Wang <hayeswang@realtek.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/usb/r8152.c | 39 +++++++++++++++++++++++++++++++++++---- - 1 file changed, 35 insertions(+), 4 deletions(-) - ---- a/drivers/net/usb/r8152.c -+++ b/drivers/net/usb/r8152.c -@@ -30,7 +30,7 @@ - #include <linux/usb/r8152.h> - - /* Information for net-next */ --#define NETNEXT_VERSION "11" -+#define NETNEXT_VERSION "12" - - /* Information for net */ - #define NET_VERSION "11" -@@ -8131,6 +8131,39 @@ static void r8156b_init(struct r8152 *tp - tp->coalesce = 15000; /* 15 us */ - } - -+static bool rtl_vendor_mode(struct usb_interface *intf) -+{ -+ struct usb_host_interface *alt = intf->cur_altsetting; -+ struct usb_device *udev; -+ struct usb_host_config *c; -+ int i, num_configs; -+ -+ if (alt->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) -+ return true; -+ -+ /* The vendor mode is not always config #1, so to find it out. */ -+ udev = interface_to_usbdev(intf); -+ c = udev->config; -+ num_configs = udev->descriptor.bNumConfigurations; -+ for (i = 0; i < num_configs; (i++, c++)) { -+ struct usb_interface_descriptor *desc = NULL; -+ -+ if (c->desc.bNumInterfaces > 0) -+ desc = &c->intf_cache[0]->altsetting->desc; -+ else -+ continue; -+ -+ if (desc->bInterfaceClass == USB_CLASS_VENDOR_SPEC) { -+ usb_driver_set_configuration(udev, c->desc.bConfigurationValue); -+ break; -+ } -+ } -+ -+ WARN_ON_ONCE(i == num_configs); -+ -+ return false; -+} -+ - static int rtl8152_pre_reset(struct usb_interface *intf) - { - struct r8152 *tp = usb_get_intfdata(intf); -@@ -9369,10 +9402,8 @@ static int rtl8152_probe(struct usb_inte - if (version == RTL_VER_UNKNOWN) - return -ENODEV; - -- if (udev->actconfig->desc.bConfigurationValue != 1) { -- usb_driver_set_configuration(udev, 1); -+ if (!rtl_vendor_mode(intf)) - return -ENODEV; -- } - - if (intf->cur_altsetting->desc.bNumEndpoints < 3) - return -ENODEV; |