diff options
Diffstat (limited to 'target/linux/bcm27xx/patches-5.4/950-0971-overlays-Add-note-to-BCM2711-overlays.patch')
| -rw-r--r-- | target/linux/bcm27xx/patches-5.4/950-0971-overlays-Add-note-to-BCM2711-overlays.patch | 150 |
1 files changed, 0 insertions, 150 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0971-overlays-Add-note-to-BCM2711-overlays.patch b/target/linux/bcm27xx/patches-5.4/950-0971-overlays-Add-note-to-BCM2711-overlays.patch deleted file mode 100644 index 3cf76d0934..0000000000 --- a/target/linux/bcm27xx/patches-5.4/950-0971-overlays-Add-note-to-BCM2711-overlays.patch +++ /dev/null @@ -1,150 +0,0 @@ -From b2e311257e8c06f5d39004515c4adb65bb4fad3f Mon Sep 17 00:00:00 2001 -From: Phil Elwell <phil@raspberrypi.com> -Date: Mon, 21 Sep 2020 22:09:40 +0100 -Subject: [PATCH] overlays: Add note to BCM2711 overlays - -Signed-off-by: Phil Elwell <phil@raspberrypi.com> ---- - arch/arm/boot/dts/overlays/README | 32 +++++++++++++++---------------- - 1 file changed, 16 insertions(+), 16 deletions(-) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1403,7 +1403,7 @@ Load: <Deprecated> - - - Name: i2c3 --Info: Enable the i2c3 bus -+Info: Enable the i2c3 bus. BCM2711 only. - Load: dtoverlay=i2c3,<param> - Params: pins_2_3 Use GPIOs 2 and 3 - pins_4_5 Use GPIOs 4 and 5 (default) -@@ -1412,7 +1412,7 @@ Params: pins_2_3 Use GPIO - - - Name: i2c4 --Info: Enable the i2c4 bus -+Info: Enable the i2c4 bus. BCM2711 only. - Load: dtoverlay=i2c4,<param> - Params: pins_6_7 Use GPIOs 6 and 7 - pins_8_9 Use GPIOs 8 and 9 (default) -@@ -1421,7 +1421,7 @@ Params: pins_6_7 Use GPIO - - - Name: i2c5 --Info: Enable the i2c5 bus -+Info: Enable the i2c5 bus. BCM2711 only. - Load: dtoverlay=i2c5,<param> - Params: pins_10_11 Use GPIOs 10 and 11 - pins_12_13 Use GPIOs 12 and 13 (default) -@@ -1430,7 +1430,7 @@ Params: pins_10_11 Use GPIO - - - Name: i2c6 --Info: Enable the i2c6 bus -+Info: Enable the i2c6 bus. BCM2711 only. - Load: dtoverlay=i2c6,<param> - Params: pins_0_1 Use GPIOs 0 and 1 - pins_22_23 Use GPIOs 22 and 23 (default) -@@ -2582,7 +2582,7 @@ Params: cs0_pin GPIO pin - Name: spi3-1cs - Info: Enables spi3 with a single chip select (CS) line and associated spidev - dev node. The gpio pin number for the CS line and spidev device node -- creation are configurable. -+ creation are configurable. BCM2711 only. - Load: dtoverlay=spi3-1cs,<param>=<val> - Params: cs0_pin GPIO pin for CS0 (default 0 - BCM SPI3_CE0). - cs0_spidev Set to 'off' to prevent the creation of a -@@ -2593,7 +2593,7 @@ Params: cs0_pin GPIO pin - Name: spi3-2cs - Info: Enables spi3 with two chip select (CS) lines and associated spidev - dev nodes. The gpio pin numbers for the CS lines and spidev device node -- creation are configurable. -+ creation are configurable. BCM2711 only. - Load: dtoverlay=spi3-2cs,<param>=<val> - Params: cs0_pin GPIO pin for CS0 (default 0 - BCM SPI3_CE0). - cs1_pin GPIO pin for CS1 (default 24 - BCM SPI3_CE1). -@@ -2608,7 +2608,7 @@ Params: cs0_pin GPIO pin - Name: spi4-1cs - Info: Enables spi4 with a single chip select (CS) line and associated spidev - dev node. The gpio pin number for the CS line and spidev device node -- creation are configurable. -+ creation are configurable. BCM2711 only. - Load: dtoverlay=spi4-1cs,<param>=<val> - Params: cs0_pin GPIO pin for CS0 (default 4 - BCM SPI4_CE0). - cs0_spidev Set to 'off' to prevent the creation of a -@@ -2619,7 +2619,7 @@ Params: cs0_pin GPIO pin - Name: spi4-2cs - Info: Enables spi4 with two chip select (CS) lines and associated spidev - dev nodes. The gpio pin numbers for the CS lines and spidev device node -- creation are configurable. -+ creation are configurable. BCM2711 only. - Load: dtoverlay=spi4-2cs,<param>=<val> - Params: cs0_pin GPIO pin for CS0 (default 4 - BCM SPI4_CE0). - cs1_pin GPIO pin for CS1 (default 25 - BCM SPI4_CE1). -@@ -2634,7 +2634,7 @@ Params: cs0_pin GPIO pin - Name: spi5-1cs - Info: Enables spi5 with a single chip select (CS) line and associated spidev - dev node. The gpio pin numbers for the CS lines and spidev device node -- creation are configurable. -+ creation are configurable. BCM2711 only. - Load: dtoverlay=spi5-1cs,<param>=<val> - Params: cs0_pin GPIO pin for CS0 (default 12 - BCM SPI5_CE0). - cs0_spidev Set to 'off' to prevent the creation of a -@@ -2645,7 +2645,7 @@ Params: cs0_pin GPIO pin - Name: spi5-2cs - Info: Enables spi5 with two chip select (CS) lines and associated spidev - dev nodes. The gpio pin numbers for the CS lines and spidev device node -- creation are configurable. -+ creation are configurable. BCM2711 only. - Load: dtoverlay=spi5-2cs,<param>=<val> - Params: cs0_pin GPIO pin for CS0 (default 12 - BCM SPI5_CE0). - cs1_pin GPIO pin for CS1 (default 26 - BCM SPI5_CE1). -@@ -2660,7 +2660,7 @@ Params: cs0_pin GPIO pin - Name: spi6-1cs - Info: Enables spi6 with a single chip select (CS) line and associated spidev - dev node. The gpio pin number for the CS line and spidev device node -- creation are configurable. -+ creation are configurable. BCM2711 only. - Load: dtoverlay=spi6-1cs,<param>=<val> - Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI6_CE0). - cs0_spidev Set to 'off' to prevent the creation of a -@@ -2671,7 +2671,7 @@ Params: cs0_pin GPIO pin - Name: spi6-2cs - Info: Enables spi6 with two chip select (CS) lines and associated spidev - dev nodes. The gpio pin numbers for the CS lines and spidev device node -- creation are configurable. -+ creation are configurable. BCM2711 only. - Load: dtoverlay=spi6-2cs,<param>=<val> - Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI6_CE0). - cs1_pin GPIO pin for CS1 (default 27 - BCM SPI6_CE1). -@@ -2843,25 +2843,25 @@ Params: txd1_pin GPIO pin - - - Name: uart2 --Info: Enable uart 2 on GPIOs 0-3 -+Info: Enable uart 2 on GPIOs 0-3. BCM2711 only. - Load: dtoverlay=uart2,<param> - Params: ctsrts Enable CTS/RTS on GPIOs 2-3 (default off) - - - Name: uart3 --Info: Enable uart 3 on GPIOs 4-7 -+Info: Enable uart 3 on GPIOs 4-7. BCM2711 only. - Load: dtoverlay=uart3,<param> - Params: ctsrts Enable CTS/RTS on GPIOs 6-7 (default off) - - - Name: uart4 --Info: Enable uart 4 on GPIOs 8-11 -+Info: Enable uart 4 on GPIOs 8-11. BCM2711 only. - Load: dtoverlay=uart4,<param> - Params: ctsrts Enable CTS/RTS on GPIOs 10-11 (default off) - - - Name: uart5 --Info: Enable uart 5 on GPIOs 12-15 -+Info: Enable uart 5 on GPIOs 12-15. BCM2711 only. - Load: dtoverlay=uart5,<param> - Params: ctsrts Enable CTS/RTS on GPIOs 14-15 (default off) - |