aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm27xx/patches-5.4/950-0867-ARM-dts-Make-bcm2711-dts-more-like-5.7.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/bcm27xx/patches-5.4/950-0867-ARM-dts-Make-bcm2711-dts-more-like-5.7.patch')
-rw-r--r--target/linux/bcm27xx/patches-5.4/950-0867-ARM-dts-Make-bcm2711-dts-more-like-5.7.patch696
1 files changed, 0 insertions, 696 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0867-ARM-dts-Make-bcm2711-dts-more-like-5.7.patch b/target/linux/bcm27xx/patches-5.4/950-0867-ARM-dts-Make-bcm2711-dts-more-like-5.7.patch
deleted file mode 100644
index bbe5569e61..0000000000
--- a/target/linux/bcm27xx/patches-5.4/950-0867-ARM-dts-Make-bcm2711-dts-more-like-5.7.patch
+++ /dev/null
@@ -1,696 +0,0 @@
-From 0f02c32b2d27fa5f0b21c67fb5518a36b5234f3a Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.com>
-Date: Tue, 7 Jul 2020 09:01:54 +0100
-Subject: [PATCH] ARM: dts: Make bcm2711 dts more like 5.7
-
-The multiple declarations of pixelvalve2 were causing problems for the
-DT checkers. Aligning the dts files closer to the later kernel versions
-avoids some repetition and should make maintenance easier.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.com>
----
- arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 142 ++++++++++++-----------
- arch/arm/boot/dts/bcm2711-rpi-cm4.dts | 69 +----------
- arch/arm/boot/dts/bcm2711-rpi.dtsi | 150 +++++++++++++++++++++++-
- arch/arm/boot/dts/bcm2711.dtsi | 157 +++-----------------------
- 4 files changed, 245 insertions(+), 273 deletions(-)
-
---- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
-+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
-@@ -19,7 +19,9 @@
- };
-
- aliases {
-+ emmc2bus = &emmc2bus;
- ethernet0 = &genet;
-+ pcie0 = &pcie0;
- };
-
- leds {
-@@ -30,6 +32,8 @@
- pwr {
- label = "PWR";
- gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-+ default-state = "keep";
-+ linux,default-trigger = "default-on";
- };
- };
-
-@@ -70,6 +74,79 @@
- };
- };
-
-+&gpio {
-+ /*
-+ * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
-+ * the official GPU firmware DT blob.
-+ *
-+ * Legend:
-+ * "FOO" = GPIO line named "FOO" on the schematic
-+ * "FOO_N" = GPIO line named "FOO" on schematic, active low
-+ */
-+ gpio-line-names = "ID_SDA",
-+ "ID_SCL",
-+ "SDA1",
-+ "SCL1",
-+ "GPIO_GCLK",
-+ "GPIO5",
-+ "GPIO6",
-+ "SPI_CE1_N",
-+ "SPI_CE0_N",
-+ "SPI_MISO",
-+ "SPI_MOSI",
-+ "SPI_SCLK",
-+ "GPIO12",
-+ "GPIO13",
-+ /* Serial port */
-+ "TXD1",
-+ "RXD1",
-+ "GPIO16",
-+ "GPIO17",
-+ "GPIO18",
-+ "GPIO19",
-+ "GPIO20",
-+ "GPIO21",
-+ "GPIO22",
-+ "GPIO23",
-+ "GPIO24",
-+ "GPIO25",
-+ "GPIO26",
-+ "GPIO27",
-+ "RGMII_MDIO",
-+ "RGMIO_MDC",
-+ /* Used by BT module */
-+ "CTS0",
-+ "RTS0",
-+ "TXD0",
-+ "RXD0",
-+ /* Used by Wifi */
-+ "SD1_CLK",
-+ "SD1_CMD",
-+ "SD1_DATA0",
-+ "SD1_DATA1",
-+ "SD1_DATA2",
-+ "SD1_DATA3",
-+ /* Shared with SPI flash */
-+ "PWM0_MISO",
-+ "PWM1_MOSI",
-+ "STATUS_LED_G_CLK",
-+ "SPIFLASH_CE_N",
-+ "SDA0",
-+ "SCL0",
-+ "RGMII_RXCLK",
-+ "RGMII_RXCTL",
-+ "RGMII_RXD0",
-+ "RGMII_RXD1",
-+ "RGMII_RXD2",
-+ "RGMII_RXD3",
-+ "RGMII_TXCLK",
-+ "RGMII_TXCTL",
-+ "RGMII_TXD0",
-+ "RGMII_TXD1",
-+ "RGMII_TXD2",
-+ "RGMII_TXD3";
-+};
-+
- &pwm1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
-@@ -138,46 +215,6 @@
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- };
-
--&vc4 {
-- status = "okay";
--};
--
--&pixelvalve0 {
-- status = "okay";
--};
--
--&pixelvalve1 {
-- status = "okay";
--};
--
--&pixelvalve2 {
-- status = "okay";
--};
--
--&pixelvalve3 {
-- status = "okay";
--};
--
--&pixelvalve4 {
-- status = "okay";
--};
--
--&hdmi0 {
-- status = "okay";
--};
--
--&ddc0 {
-- status = "okay";
--};
--
--&hdmi1 {
-- status = "okay";
--};
--
--&ddc1 {
-- status = "okay";
--};
--
- // =============================================
- // Downstream rpi- changes
-
-@@ -195,8 +232,6 @@
- #include "bcm283x-rpi-csi1-2lane.dtsi"
- #include "bcm283x-rpi-i2c0mux_0_44.dtsi"
-
--/delete-node/ &emmc2;
--
- / {
- chosen {
- bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1";
-@@ -213,29 +248,7 @@
- i2c4 = &i2c4;
- i2c5 = &i2c5;
- i2c6 = &i2c6;
-- /delete-property/ ethernet;
- /delete-property/ intc;
-- pcie0 = &pcie0;
-- emmc2bus = &emmc2bus;
-- };
--
-- emmc2bus: emmc2bus {
-- compatible = "simple-bus";
-- #address-cells = <2>;
-- #size-cells = <1>;
--
-- ranges = <0x0 0x7e000000 0x0 0xfe000000 0x01800000>;
-- dma-ranges = <0x0 0xc0000000 0x0 0x00000000 0x40000000>;
--
-- emmc2: emmc2@7e340000 {
-- compatible = "brcm,bcm2711-emmc2";
-- status = "okay";
-- interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2711_CLOCK_EMMC2>;
-- reg = <0x0 0x7e340000 0x100>;
-- vqmmc-supply = <&sd_io_1v8_reg>;
-- broken-cd;
-- };
- };
-
- /delete-node/ wifi-pwrseq;
-@@ -557,6 +570,7 @@
- eth_led0 = <&phy1>,"led-modes:0";
- eth_led1 = <&phy1>,"led-modes:4";
-
-+ sd_poll_once = <&emmc2>, "non-removable?";
- spi_dma4 = <&spi0>, "dmas:0=", <&dma40>,
- <&spi0>, "dmas:8=", <&dma40>;
- };
---- a/arch/arm/boot/dts/bcm2711-rpi-cm4.dts
-+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dts
-@@ -19,7 +19,9 @@
- };
-
- aliases {
-+ emmc2bus = &emmc2bus;
- ethernet0 = &genet;
-+ pcie0 = &pcie0;
- };
-
- leds {
-@@ -30,6 +32,8 @@
- pwr {
- label = "PWR";
- gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-+ default-state = "keep";
-+ linux,default-trigger = "default-on";
- };
- };
-
-@@ -150,46 +154,6 @@
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- };
-
--&vc4 {
-- status = "okay";
--};
--
--&pixelvalve0 {
-- status = "okay";
--};
--
--&pixelvalve1 {
-- status = "okay";
--};
--
--&pixelvalve2 {
-- status = "okay";
--};
--
--&pixelvalve3 {
-- status = "okay";
--};
--
--&pixelvalve4 {
-- status = "okay";
--};
--
--&hdmi0 {
-- status = "okay";
--};
--
--&ddc0 {
-- status = "okay";
--};
--
--&hdmi1 {
-- status = "okay";
--};
--
--&ddc1 {
-- status = "okay";
--};
--
- // =============================================
- // Downstream rpi- changes
-
-@@ -208,8 +172,6 @@
- #include "bcm283x-rpi-csi1-4lane.dtsi"
- #include "bcm283x-rpi-i2c0mux_0_44.dtsi"
-
--/delete-node/ &emmc2;
--
- / {
- chosen {
- bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1";
-@@ -226,29 +188,7 @@
- i2c4 = &i2c4;
- i2c5 = &i2c5;
- i2c6 = &i2c6;
-- /delete-property/ ethernet;
- /delete-property/ intc;
-- pcie0 = &pcie0;
-- emmc2bus = &emmc2bus;
-- };
--
-- emmc2bus: emmc2bus {
-- compatible = "simple-bus";
-- #address-cells = <2>;
-- #size-cells = <1>;
--
-- ranges = <0x0 0x7e000000 0x0 0xfe000000 0x01800000>;
-- dma-ranges = <0x0 0xc0000000 0x0 0x00000000 0x40000000>;
--
-- emmc2: emmc2@7e340000 {
-- compatible = "brcm,bcm2711-emmc2";
-- status = "okay";
-- interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2711_CLOCK_EMMC2>;
-- reg = <0x0 0x7e340000 0x100>;
-- vqmmc-supply = <&sd_io_1v8_reg>;
-- broken-cd;
-- };
- };
-
- /delete-node/ wifi-pwrseq;
-@@ -588,6 +528,7 @@
- <&ant2>, "output-high?=off",
- <&ant2>, "output-low?=on";
-
-+ sd_poll_once = <&emmc2>, "non-removable?";
- spi_dma4 = <&spi0>, "dmas:0=", <&dma40>,
- <&spi0>, "dmas:8=", <&dma40>;
- };
---- a/arch/arm/boot/dts/bcm2711-rpi.dtsi
-+++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi
-@@ -4,6 +4,129 @@
- / {
- soc {
- /delete-node/ v3d@7ec00000;
-+
-+ pixelvalve0: pixelvalve@7e206000 {
-+ compatible = "brcm,bcm2711-pixelvalve0";
-+ reg = <0x7e206000 0x100>;
-+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-+ status = "disabled";
-+ };
-+
-+ pixelvalve1: pixelvalve@7e207000 {
-+ compatible = "brcm,bcm2711-pixelvalve1";
-+ reg = <0x7e207000 0x100>;
-+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-+ status = "disabled";
-+ };
-+
-+ pixelvalve2: pixelvalve@7e20a000 {
-+ compatible = "brcm,bcm2711-pixelvalve2";
-+ reg = <0x7e20a000 0x100>;
-+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-+ status = "disabled";
-+ };
-+
-+ pixelvalve4: pixelvalve@7e216000 {
-+ compatible = "brcm,bcm2711-pixelvalve4";
-+ reg = <0x7e216000 0x100>;
-+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-+ status = "disabled";
-+ };
-+
-+ pixelvalve3: pixelvalve@7ec12000 {
-+ compatible = "brcm,bcm2711-pixelvalve3";
-+ reg = <0x7ec12000 0x100>;
-+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-+ status = "disabled";
-+ };
-+
-+ dvp: clock@7ef00000 {
-+ compatible = "brcm,brcm2711-dvp";
-+ reg = <0x7ef00000 0x10>;
-+ clocks = <&clk_108MHz>;
-+ #clock-cells = <1>;
-+ #reset-cells = <1>;
-+ };
-+
-+ hdmi0: hdmi@7ef00700 {
-+ compatible = "brcm,bcm2711-hdmi0";
-+ reg = <0x7ef00700 0x300>,
-+ <0x7ef00300 0x200>,
-+ <0x7ef00f00 0x80>,
-+ <0x7ef00f80 0x80>,
-+ <0x7ef01b00 0x200>,
-+ <0x7ef01f00 0x400>,
-+ <0x7ef00200 0x80>,
-+ <0x7ef04300 0x100>,
-+ <0x7ef20000 0x100>,
-+ <0x7ef00100 0x30>;
-+ reg-names = "hdmi",
-+ "dvp",
-+ "phy",
-+ "rm",
-+ "packet",
-+ "metadata",
-+ "csc",
-+ "cec",
-+ "hd",
-+ "intr2";
-+ clocks = <&firmware_clocks 13>;
-+ clock-names = "hdmi";
-+ resets = <&dvp 0>;
-+ ddc = <&ddc0>;
-+ dmas = <&dma 10>;
-+ dma-names = "audio-rx";
-+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-+ status = "disabled";
-+ };
-+
-+ ddc0: i2c@7ef04500 {
-+ compatible = "brcm,bcm2711-hdmi-i2c";
-+ reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
-+ reg-names = "bsc", "auto-i2c";
-+ clock-frequency = <97500>;
-+ status = "disabled";
-+ };
-+
-+ hdmi1: hdmi@7ef05700 {
-+ compatible = "brcm,bcm2711-hdmi1";
-+ reg = <0x7ef05700 0x300>,
-+ <0x7ef05300 0x200>,
-+ <0x7ef05f00 0x80>,
-+ <0x7ef05f80 0x80>,
-+ <0x7ef06b00 0x200>,
-+ <0x7ef06f00 0x400>,
-+ <0x7ef00280 0x80>,
-+ <0x7ef09300 0x100>,
-+ <0x7ef20000 0x100>,
-+ <0x7ef00100 0x30>;
-+ reg-names = "hdmi",
-+ "dvp",
-+ "phy",
-+ "rm",
-+ "packet",
-+ "metadata",
-+ "csc",
-+ "cec",
-+ "hd",
-+ "intr2";
-+ ddc = <&ddc1>;
-+ clocks = <&firmware_clocks 13>;
-+ clock-names = "hdmi";
-+ resets = <&dvp 1>;
-+ dmas = <&dma 17>;
-+ dma-names = "audio-rx";
-+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-+ status = "disabled";
-+ };
-+
-+ ddc1: i2c@7ef09500 {
-+ compatible = "brcm,bcm2711-hdmi-i2c";
-+ reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>;
-+ reg-names = "bsc", "auto-i2c";
-+ clock-frequency = <97500>;
-+ status = "disabled";
-+ };
- };
-
- __overrides__ {
-@@ -42,22 +165,33 @@
- scb: scb {
- /* Add a label */
- };
--};
-
--&cma {
-- /* Limit cma to the lower 768MB to allow room for HIGHMEM on 32-bit */
-- alloc-ranges = <0x0 0x00000000 0x30000000>;
-+ vc4: gpu {
-+ compatible = "brcm,bcm2711-vc5";
-+ status = "disabled";
-+ };
-+
-+ clk_108MHz: clk-108M {
-+ #clock-cells = <0>;
-+ compatible = "fixed-clock";
-+ clock-frequency = <108000000>;
-+ clock-output-names = "108MHz-clock";
-+ };
- };
-
- &soc {
- /delete-node/ audio;
- };
-
-+&cma {
-+ /* Limit cma to the lower 768MB to allow room for HIGHMEM on 32-bit */
-+ alloc-ranges = <0x0 0x00000000 0x30000000>;
-+};
-+
- &scb {
- ranges = <0x0 0x7c000000 0x0 0xfc000000 0x0 0x03800000>,
- <0x0 0x40000000 0x0 0xff800000 0x0 0x00800000>,
-- <0x6 0x00000000 0x6 0x00000000 0x0 0x40000000>,
-- <0x0 0x00000000 0x0 0x00000000 0x0 0xfc000000>;
-+ <0x6 0x00000000 0x6 0x00000000 0x0 0x40000000>;
- dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x0 0xfc000000>,
- <0x1 0x00000000 0x1 0x00000000 0x1 0x00000000>;
-
-@@ -171,6 +305,10 @@
- compatible = "brcm,bcm2711-genet-v5", "brcm,genet-v5";
- };
-
-+&hvs {
-+ clocks = <&firmware_clocks 4>;
-+};
-+
- &firmware {
- firmware_clocks: clocks {
- compatible = "raspberrypi,firmware-clocks";
---- a/arch/arm/boot/dts/bcm2711.dtsi
-+++ b/arch/arm/boot/dts/bcm2711.dtsi
-@@ -12,18 +12,6 @@
-
- interrupt-parent = <&gicv2>;
-
-- vc4: gpu {
-- compatible = "brcm,bcm2711-vc5";
-- status = "disabled";
-- };
--
-- clk_108MHz: clk-108M {
-- #clock-cells = <0>;
-- compatible = "fixed-clock";
-- clock-frequency = <108000000>;
-- clock-output-names = "108MHz-clock";
-- };
--
- soc {
- /*
- * Defined ranges:
-@@ -245,27 +233,6 @@
- status = "disabled";
- };
-
-- pixelvalve0: pixelvalve@7e206000 {
-- compatible = "brcm,bcm2711-pixelvalve0";
-- reg = <0x7e206000 0x100>;
-- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-- status = "disabled";
-- };
--
-- pixelvalve1: pixelvalve@7e207000 {
-- compatible = "brcm,bcm2711-pixelvalve1";
-- reg = <0x7e207000 0x100>;
-- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-- status = "disabled";
-- };
--
-- pixelvalve2: pixelvalve@7e20a000 {
-- compatible = "brcm,bcm2711-pixelvalve2";
-- reg = <0x7e20a000 0x100>;
-- interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-- status = "disabled";
-- };
--
- pwm1: pwm@7e20c800 {
- compatible = "brcm,bcm2835-pwm";
- reg = <0x7e20c800 0x28>;
-@@ -276,118 +243,30 @@
- status = "disabled";
- };
-
-- pixelvalve4: pixelvalve@7e216000 {
-- compatible = "brcm,bcm2711-pixelvalve4";
-- reg = <0x7e216000 0x100>;
-- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-- status = "disabled";
-- };
--
-- emmc2: emmc2@7e340000 {
-- compatible = "brcm,bcm2711-emmc2";
-- reg = <0x7e340000 0x100>;
-- interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2711_CLOCK_EMMC2>;
-- status = "disabled";
-- };
--
- hvs@7e400000 {
-- clocks = <&firmware_clocks 4>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- };
-+ };
-
-- pixelvalve3: pixelvalve@7ec12000 {
-- compatible = "brcm,bcm2711-pixelvalve3";
-- reg = <0x7ec12000 0x100>;
-- interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-- status = "disabled";
-- };
-+ /*
-+ * emmc2 has different DMA constraints based on SoC revisions. It was
-+ * moved into its own bus, so as for RPi4's firmware to update them.
-+ * The firmware will find whether the emmc2bus alias is defined, and if
-+ * so, it'll edit the dma-ranges property below accordingly.
-+ */
-+ emmc2bus: emmc2bus {
-+ compatible = "simple-bus";
-+ #address-cells = <2>;
-+ #size-cells = <1>;
-
-- dvp: clock@7ef00000 {
-- compatible = "brcm,brcm2711-dvp";
-- reg = <0x7ef00000 0x10>;
-- clocks = <&clk_108MHz>;
-- #clock-cells = <1>;
-- #reset-cells = <1>;
-- };
-+ ranges = <0x0 0x7e000000 0x0 0xfe000000 0x01800000>;
-+ dma-ranges = <0x0 0xc0000000 0x0 0x00000000 0x40000000>;
-
-- hdmi0: hdmi@7ef00700 {
-- compatible = "brcm,bcm2711-hdmi0";
-- reg = <0x7ef00700 0x300>,
-- <0x7ef00300 0x200>,
-- <0x7ef00f00 0x80>,
-- <0x7ef00f80 0x80>,
-- <0x7ef01b00 0x200>,
-- <0x7ef01f00 0x400>,
-- <0x7ef00200 0x80>,
-- <0x7ef04300 0x100>,
-- <0x7ef20000 0x100>,
-- <0x7ef00100 0x30>;
-- reg-names = "hdmi",
-- "dvp",
-- "phy",
-- "rm",
-- "packet",
-- "metadata",
-- "csc",
-- "cec",
-- "hd",
-- "intr2";
-- clocks = <&firmware_clocks 13>;
-- clock-names = "hdmi";
-- resets = <&dvp 0>;
-- ddc = <&ddc0>;
-- dmas = <&dma 10>;
-- dma-names = "audio-rx";
-- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-- status = "disabled";
-- };
--
-- ddc0: i2c@7ef04500 {
-- compatible = "brcm,bcm2711-hdmi-i2c";
-- reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
-- reg-names = "bsc", "auto-i2c";
-- clock-frequency = <97500>;
-- status = "disabled";
-- };
--
-- hdmi1: hdmi@7ef05700 {
-- compatible = "brcm,bcm2711-hdmi1";
-- reg = <0x7ef05700 0x300>,
-- <0x7ef05300 0x200>,
-- <0x7ef05f00 0x80>,
-- <0x7ef05f80 0x80>,
-- <0x7ef06b00 0x200>,
-- <0x7ef06f00 0x400>,
-- <0x7ef00280 0x80>,
-- <0x7ef09300 0x100>,
-- <0x7ef20000 0x100>,
-- <0x7ef00100 0x30>;
-- reg-names = "hdmi",
-- "dvp",
-- "phy",
-- "rm",
-- "packet",
-- "metadata",
-- "csc",
-- "cec",
-- "hd",
-- "intr2";
-- ddc = <&ddc1>;
-- clocks = <&firmware_clocks 13>;
-- clock-names = "hdmi";
-- resets = <&dvp 1>;
-- dmas = <&dma 17>;
-- dma-names = "audio-rx";
-- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-- status = "disabled";
-- };
--
-- ddc1: i2c@7ef09500 {
-- compatible = "brcm,bcm2711-hdmi-i2c";
-- reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>;
-- reg-names = "bsc", "auto-i2c";
-- clock-frequency = <97500>;
-+ emmc2: emmc2@7e340000 {
-+ compatible = "brcm,bcm2711-emmc2";
-+ reg = <0x0 0x7e340000 0x100>;
-+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&clocks BCM2711_CLOCK_EMMC2>;
- status = "disabled";
- };
- };
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 17:54:54 +0000