aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm27xx/patches-5.4/950-0804-drivers-media-Remove-the-downstream-version-of-bcm28.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/bcm27xx/patches-5.4/950-0804-drivers-media-Remove-the-downstream-version-of-bcm28.patch')
-rw-r--r--target/linux/bcm27xx/patches-5.4/950-0804-drivers-media-Remove-the-downstream-version-of-bcm28.patch3175
1 files changed, 0 insertions, 3175 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0804-drivers-media-Remove-the-downstream-version-of-bcm28.patch b/target/linux/bcm27xx/patches-5.4/950-0804-drivers-media-Remove-the-downstream-version-of-bcm28.patch
deleted file mode 100644
index f4a89a99bd..0000000000
--- a/target/linux/bcm27xx/patches-5.4/950-0804-drivers-media-Remove-the-downstream-version-of-bcm28.patch
+++ /dev/null
@@ -1,3175 +0,0 @@
-From c6a423459a233669b280e1a4e4836881d77c9ff0 Mon Sep 17 00:00:00 2001
-From: Dave Stevenson <dave.stevenson@raspberrypi.com>
-Date: Tue, 23 Jun 2020 10:05:57 +0100
-Subject: [PATCH] drivers: media: Remove the downstream version of
- bcm2835-unicam
-
-About to be replaced by the upstream version.
-
-Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
----
- drivers/media/platform/bcm2835/Kconfig | 14 -
- drivers/media/platform/bcm2835/Makefile | 3 -
- .../media/platform/bcm2835/bcm2835-unicam.c | 2873 -----------------
- .../media/platform/bcm2835/vc4-regs-unicam.h | 253 --
- 4 files changed, 3143 deletions(-)
- delete mode 100644 drivers/media/platform/bcm2835/Kconfig
- delete mode 100644 drivers/media/platform/bcm2835/Makefile
- delete mode 100644 drivers/media/platform/bcm2835/bcm2835-unicam.c
- delete mode 100644 drivers/media/platform/bcm2835/vc4-regs-unicam.h
-
---- a/drivers/media/platform/bcm2835/Kconfig
-+++ /dev/null
-@@ -1,14 +0,0 @@
--# Broadcom VideoCore4 V4L2 camera support
--
--config VIDEO_BCM2835_UNICAM
-- tristate "Broadcom BCM2835 Unicam video capture driver"
-- depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && MEDIA_CONTROLLER
-- depends on ARCH_BCM2835 || COMPILE_TEST
-- select VIDEOBUF2_DMA_CONTIG
-- select V4L2_FWNODE
-- help
-- Say Y here to enable V4L2 subdevice for CSI2 receiver.
-- This is a V4L2 subdevice that interfaces directly to the VC4 peripheral.
--
-- To compile this driver as a module, choose M here. The module
-- will be called bcm2835-unicam.
---- a/drivers/media/platform/bcm2835/Makefile
-+++ /dev/null
-@@ -1,3 +0,0 @@
--# Makefile for BCM2835 Unicam driver
--
--obj-$(CONFIG_VIDEO_BCM2835_UNICAM) += bcm2835-unicam.o
---- a/drivers/media/platform/bcm2835/bcm2835-unicam.c
-+++ /dev/null
-@@ -1,2873 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0-only
--/*
-- * BCM2835 Unicam Capture Driver
-- *
-- * Copyright (C) 2017-2020 - Raspberry Pi (Trading) Ltd.
-- *
-- * Dave Stevenson <dave.stevenson@raspberrypi.com>
-- *
-- * Based on TI am437x driver by
-- * Benoit Parrot <bparrot@ti.com>
-- * Lad, Prabhakar <prabhakar.csengg@gmail.com>
-- *
-- * and TI CAL camera interface driver by
-- * Benoit Parrot <bparrot@ti.com>
-- *
-- *
-- * There are two camera drivers in the kernel for BCM283x - this one
-- * and bcm2835-camera (currently in staging).
-- *
-- * This driver directly controls the Unicam peripheral - there is no
-- * involvement with the VideoCore firmware. Unicam receives CSI-2 or
-- * CCP2 data and writes it into SDRAM.
-- * The only potential processing options are to repack Bayer data into an
-- * alternate format, and applying windowing.
-- * The repacking does not shift the data, so can repack V4L2_PIX_FMT_Sxxxx10P
-- * to V4L2_PIX_FMT_Sxxxx10, or V4L2_PIX_FMT_Sxxxx12P to V4L2_PIX_FMT_Sxxxx12,
-- * but not generically up to V4L2_PIX_FMT_Sxxxx16. The driver will add both
-- * formats where the relevant formats are defined, and will automatically
-- * configure the repacking as required.
-- * Support for windowing may be added later.
-- *
-- * It should be possible to connect this driver to any sensor with a
-- * suitable output interface and V4L2 subdevice driver.
-- *
-- * bcm2835-camera uses the VideoCore firmware to control the sensor,
-- * Unicam, ISP, and all tuner control loops. Fully processed frames are
-- * delivered to the driver by the firmware. It only has sensor drivers
-- * for Omnivision OV5647, and Sony IMX219 sensors.
-- *
-- * The two drivers are mutually exclusive for the same Unicam instance.
-- * The VideoCore firmware checks the device tree configuration during boot.
-- * If it finds device tree nodes called csi0 or csi1 it will block the
-- * firmware from accessing the peripheral, and bcm2835-camera will
-- * not be able to stream data.
-- */
--
--#include <linux/clk.h>
--#include <linux/delay.h>
--#include <linux/device.h>
--#include <linux/dma-mapping.h>
--#include <linux/err.h>
--#include <linux/init.h>
--#include <linux/interrupt.h>
--#include <linux/io.h>
--#include <linux/module.h>
--#include <linux/of_device.h>
--#include <linux/of_graph.h>
--#include <linux/pinctrl/consumer.h>
--#include <linux/platform_device.h>
--#include <linux/pm_runtime.h>
--#include <linux/slab.h>
--#include <linux/uaccess.h>
--#include <linux/videodev2.h>
--
--#include <media/v4l2-common.h>
--#include <media/v4l2-ctrls.h>
--#include <media/v4l2-dev.h>
--#include <media/v4l2-device.h>
--#include <media/v4l2-dv-timings.h>
--#include <media/v4l2-event.h>
--#include <media/v4l2-ioctl.h>
--#include <media/v4l2-fwnode.h>
--#include <media/videobuf2-dma-contig.h>
--
--#include "vc4-regs-unicam.h"
--
--#define UNICAM_MODULE_NAME "unicam"
--#define UNICAM_VERSION "0.1.0"
--
--static int debug;
--module_param(debug, int, 0644);
--MODULE_PARM_DESC(debug, "Debug level 0-3");
--
--#define unicam_dbg(level, dev, fmt, arg...) \
-- v4l2_dbg(level, debug, &(dev)->v4l2_dev, fmt, ##arg)
--#define unicam_info(dev, fmt, arg...) \
-- v4l2_info(&(dev)->v4l2_dev, fmt, ##arg)
--#define unicam_err(dev, fmt, arg...) \
-- v4l2_err(&(dev)->v4l2_dev, fmt, ##arg)
--
--/* To protect against a dodgy sensor driver never returning an error from
-- * enum_mbus_code, set a maximum index value to be used.
-- */
--#define MAX_ENUM_MBUS_CODE 128
--
--/*
-- * Stride is a 16 bit register, but also has to be a multiple of 32.
-- */
--#define BPL_ALIGNMENT 32
--#define MAX_BYTESPERLINE ((1 << 16) - BPL_ALIGNMENT)
--/*
-- * Max width is therefore determined by the max stride divided by
-- * the number of bits per pixel. Take 32bpp as a
-- * worst case.
-- * No imposed limit on the height, so adopt a square image for want
-- * of anything better.
-- */
--#define MAX_WIDTH (MAX_BYTESPERLINE / 4)
--#define MAX_HEIGHT MAX_WIDTH
--/* Define a nominal minimum image size */
--#define MIN_WIDTH 16
--#define MIN_HEIGHT 16
--/* Default size of the embedded buffer */
--#define UNICAM_EMBEDDED_SIZE 8192
--
--/*
-- * Size of the dummy buffer. Can be any size really, but the DMA
-- * allocation works in units of page sizes.
-- */
--#define DUMMY_BUF_SIZE (PAGE_SIZE)
--
--enum pad_types {
-- IMAGE_PAD,
-- METADATA_PAD,
-- MAX_NODES
--};
--
--/*
-- * struct unicam_fmt - Unicam media bus format information
-- * @pixelformat: V4L2 pixel format FCC identifier. 0 if n/a.
-- * @repacked_fourcc: V4L2 pixel format FCC identifier if the data is expanded
-- * out to 16bpp. 0 if n/a.
-- * @code: V4L2 media bus format code.
-- * @depth: Bits per pixel as delivered from the source.
-- * @csi_dt: CSI data type.
-- * @check_variants: Flag to denote that there are multiple mediabus formats
-- * still in the list that could match this V4L2 format.
-- */
--struct unicam_fmt {
-- u32 fourcc;
-- u32 repacked_fourcc;
-- u32 code;
-- u8 depth;
-- u8 csi_dt;
-- u8 check_variants;
--};
--
--static const struct unicam_fmt formats[] = {
-- /* YUV Formats */
-- {
-- .fourcc = V4L2_PIX_FMT_YUYV,
-- .code = MEDIA_BUS_FMT_YUYV8_2X8,
-- .depth = 16,
-- .csi_dt = 0x1e,
-- .check_variants = 1,
-- }, {
-- .fourcc = V4L2_PIX_FMT_UYVY,
-- .code = MEDIA_BUS_FMT_UYVY8_2X8,
-- .depth = 16,
-- .csi_dt = 0x1e,
-- .check_variants = 1,
-- }, {
-- .fourcc = V4L2_PIX_FMT_YVYU,
-- .code = MEDIA_BUS_FMT_YVYU8_2X8,
-- .depth = 16,
-- .csi_dt = 0x1e,
-- .check_variants = 1,
-- }, {
-- .fourcc = V4L2_PIX_FMT_VYUY,
-- .code = MEDIA_BUS_FMT_VYUY8_2X8,
-- .depth = 16,
-- .csi_dt = 0x1e,
-- .check_variants = 1,
-- }, {
-- .fourcc = V4L2_PIX_FMT_YUYV,
-- .code = MEDIA_BUS_FMT_YUYV8_1X16,
-- .depth = 16,
-- .csi_dt = 0x1e,
-- }, {
-- .fourcc = V4L2_PIX_FMT_UYVY,
-- .code = MEDIA_BUS_FMT_UYVY8_1X16,
-- .depth = 16,
-- .csi_dt = 0x1e,
-- }, {
-- .fourcc = V4L2_PIX_FMT_YVYU,
-- .code = MEDIA_BUS_FMT_YVYU8_1X16,
-- .depth = 16,
-- .csi_dt = 0x1e,
-- }, {
-- .fourcc = V4L2_PIX_FMT_VYUY,
-- .code = MEDIA_BUS_FMT_VYUY8_1X16,
-- .depth = 16,
-- .csi_dt = 0x1e,
-- }, {
-- /* RGB Formats */
-- .fourcc = V4L2_PIX_FMT_RGB565, /* gggbbbbb rrrrrggg */
-- .code = MEDIA_BUS_FMT_RGB565_2X8_LE,
-- .depth = 16,
-- .csi_dt = 0x22,
-- }, {
-- .fourcc = V4L2_PIX_FMT_RGB565X, /* rrrrrggg gggbbbbb */
-- .code = MEDIA_BUS_FMT_RGB565_2X8_BE,
-- .depth = 16,
-- .csi_dt = 0x22
-- }, {
-- .fourcc = V4L2_PIX_FMT_RGB555, /* gggbbbbb arrrrrgg */
-- .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE,
-- .depth = 16,
-- .csi_dt = 0x21,
-- }, {
-- .fourcc = V4L2_PIX_FMT_RGB555X, /* arrrrrgg gggbbbbb */
-- .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE,
-- .depth = 16,
-- .csi_dt = 0x21,
-- }, {
-- .fourcc = V4L2_PIX_FMT_RGB24, /* rgb */
-- .code = MEDIA_BUS_FMT_RGB888_1X24,
-- .depth = 24,
-- .csi_dt = 0x24,
-- }, {
-- .fourcc = V4L2_PIX_FMT_BGR24, /* bgr */
-- .code = MEDIA_BUS_FMT_BGR888_1X24,
-- .depth = 24,
-- .csi_dt = 0x24,
-- }, {
-- .fourcc = V4L2_PIX_FMT_RGB32, /* argb */
-- .code = MEDIA_BUS_FMT_ARGB8888_1X32,
-- .depth = 32,
-- .csi_dt = 0x0,
-- }, {
-- /* Bayer Formats */
-- .fourcc = V4L2_PIX_FMT_SBGGR8,
-- .code = MEDIA_BUS_FMT_SBGGR8_1X8,
-- .depth = 8,
-- .csi_dt = 0x2a,
-- }, {
-- .fourcc = V4L2_PIX_FMT_SGBRG8,
-- .code = MEDIA_BUS_FMT_SGBRG8_1X8,
-- .depth = 8,
-- .csi_dt = 0x2a,
-- }, {
-- .fourcc = V4L2_PIX_FMT_SGRBG8,
-- .code = MEDIA_BUS_FMT_SGRBG8_1X8,
-- .depth = 8,
-- .csi_dt = 0x2a,
-- }, {
-- .fourcc = V4L2_PIX_FMT_SRGGB8,
-- .code = MEDIA_BUS_FMT_SRGGB8_1X8,
-- .depth = 8,
-- .csi_dt = 0x2a,
-- }, {
-- .fourcc = V4L2_PIX_FMT_SBGGR10P,
-- .repacked_fourcc = V4L2_PIX_FMT_SBGGR10,
-- .code = MEDIA_BUS_FMT_SBGGR10_1X10,
-- .depth = 10,
-- .csi_dt = 0x2b,
-- }, {
-- .fourcc = V4L2_PIX_FMT_SGBRG10P,
-- .repacked_fourcc = V4L2_PIX_FMT_SGBRG10,
-- .code = MEDIA_BUS_FMT_SGBRG10_1X10,
-- .depth = 10,
-- .csi_dt = 0x2b,
-- }, {
-- .fourcc = V4L2_PIX_FMT_SGRBG10P,
-- .repacked_fourcc = V4L2_PIX_FMT_SGRBG10,
-- .code = MEDIA_BUS_FMT_SGRBG10_1X10,
-- .depth = 10,
-- .csi_dt = 0x2b,
-- }, {
-- .fourcc = V4L2_PIX_FMT_SRGGB10P,
-- .repacked_fourcc = V4L2_PIX_FMT_SRGGB10,
-- .code = MEDIA_BUS_FMT_SRGGB10_1X10,
-- .depth = 10,
-- .csi_dt = 0x2b,
-- }, {
-- .fourcc = V4L2_PIX_FMT_SBGGR12P,
-- .repacked_fourcc = V4L2_PIX_FMT_SBGGR12,
-- .code = MEDIA_BUS_FMT_SBGGR12_1X12,
-- .depth = 12,
-- .csi_dt = 0x2c,
-- }, {
-- .fourcc = V4L2_PIX_FMT_SGBRG12P,
-- .repacked_fourcc = V4L2_PIX_FMT_SGBRG12,
-- .code = MEDIA_BUS_FMT_SGBRG12_1X12,
-- .depth = 12,
-- .csi_dt = 0x2c,
-- }, {
-- .fourcc = V4L2_PIX_FMT_SGRBG12P,
-- .repacked_fourcc = V4L2_PIX_FMT_SGRBG12,
-- .code = MEDIA_BUS_FMT_SGRBG12_1X12,
-- .depth = 12,
-- .csi_dt = 0x2c,
-- }, {
-- .fourcc = V4L2_PIX_FMT_SRGGB12P,
-- .repacked_fourcc = V4L2_PIX_FMT_SRGGB12,
-- .code = MEDIA_BUS_FMT_SRGGB12_1X12,
-- .depth = 12,
-- .csi_dt = 0x2c,
-- }, {
-- .fourcc = V4L2_PIX_FMT_SBGGR14P,
-- .code = MEDIA_BUS_FMT_SBGGR14_1X14,
-- .depth = 14,
-- .csi_dt = 0x2d,
-- }, {
-- .fourcc = V4L2_PIX_FMT_SGBRG14P,
-- .code = MEDIA_BUS_FMT_SGBRG14_1X14,
-- .depth = 14,
-- .csi_dt = 0x2d,
-- }, {
-- .fourcc = V4L2_PIX_FMT_SGRBG14P,
-- .code = MEDIA_BUS_FMT_SGRBG14_1X14,
-- .depth = 14,
-- .csi_dt = 0x2d,
-- }, {
-- .fourcc = V4L2_PIX_FMT_SRGGB14P,
-- .code = MEDIA_BUS_FMT_SRGGB14_1X14,
-- .depth = 14,
-- .csi_dt = 0x2d,
-- }, {
-- /*
-- * 16 bit Bayer formats could be supported, but there is no CSI2
-- * data_type defined for raw 16, and no sensors that produce it at
-- * present.
-- */
--
-- /* Greyscale formats */
-- .fourcc = V4L2_PIX_FMT_GREY,
-- .code = MEDIA_BUS_FMT_Y8_1X8,
-- .depth = 8,
-- .csi_dt = 0x2a,
-- }, {
-- .fourcc = V4L2_PIX_FMT_Y10P,
-- .repacked_fourcc = V4L2_PIX_FMT_Y10,
-- .code = MEDIA_BUS_FMT_Y10_1X10,
-- .depth = 10,
-- .csi_dt = 0x2b,
-- }, {
-- /* NB There is no packed V4L2 fourcc for this format. */
-- .repacked_fourcc = V4L2_PIX_FMT_Y12,
-- .code = MEDIA_BUS_FMT_Y12_1X12,
-- .depth = 12,
-- .csi_dt = 0x2c,
-- },
-- /* Embedded data format */
-- {
-- .fourcc = V4L2_META_FMT_SENSOR_DATA,
-- .code = MEDIA_BUS_FMT_SENSOR_DATA,
-- .depth = 8,
-- }
--};
--
--struct unicam_dmaqueue {
-- struct list_head active;
--};
--
--struct unicam_buffer {
-- struct vb2_v4l2_buffer vb;
-- struct list_head list;
--};
--
--struct unicam_cfg {
-- /* peripheral base address */
-- void __iomem *base;
-- /* clock gating base address */
-- void __iomem *clk_gate_base;
--};
--
--#define MAX_POSSIBLE_PIX_FMTS (ARRAY_SIZE(formats))
--
--struct unicam_node {
-- int registered;
-- int open;
-- int streaming;
-- unsigned int pad_id;
-- /* Pointer pointing to current v4l2_buffer */
-- struct unicam_buffer *cur_frm;
-- /* Pointer pointing to next v4l2_buffer */
-- struct unicam_buffer *next_frm;
-- /* video capture */
-- const struct unicam_fmt *fmt;
-- /* Used to store current pixel format */
-- struct v4l2_format v_fmt;
-- /* Used to store current mbus frame format */
-- struct v4l2_mbus_framefmt m_fmt;
-- /* Buffer queue used in video-buf */
-- struct vb2_queue buffer_queue;
-- /* Queue of filled frames */
-- struct unicam_dmaqueue dma_queue;
-- /* IRQ lock for DMA queue */
-- spinlock_t dma_queue_lock;
-- /* lock used to access this structure */
-- struct mutex lock;
-- /* Identifies video device for this channel */
-- struct video_device video_dev;
-- /* Pointer to the parent handle */
-- struct unicam_device *dev;
-- struct media_pad pad;
-- struct v4l2_ctrl_handler ctrl_handler;
-- unsigned int embedded_lines;
-- /*
-- * Dummy buffer intended to be used by unicam
-- * if we have no other queued buffers to swap to.
-- */
-- void *dummy_buf_cpu_addr;
-- dma_addr_t dummy_buf_dma_addr;
--};
--
--struct unicam_device {
-- /* V4l2 specific parameters */
--
-- struct v4l2_fwnode_endpoint endpoint;
--
-- struct v4l2_async_subdev asd;
--
-- /* unicam cfg */
-- struct unicam_cfg cfg;
-- /* clock handle */
-- struct clk *clock;
-- /* V4l2 device */
-- struct v4l2_device v4l2_dev;
-- struct media_device mdev;
--
-- /* parent device */
-- struct platform_device *pdev;
-- /* subdevice async Notifier */
-- struct v4l2_async_notifier notifier;
-- unsigned int sequence;
--
-- /* ptr to sub device */
-- struct v4l2_subdev *sensor;
-- /* Pad config for the sensor */
-- struct v4l2_subdev_pad_config *sensor_config;
--
-- unsigned int virtual_channel;
-- enum v4l2_mbus_type bus_type;
-- /*
-- * Stores bus.mipi_csi2.flags for CSI2 sensors, or
-- * bus.mipi_csi1.strobe for CCP2.
-- */
-- unsigned int bus_flags;
-- unsigned int max_data_lanes;
-- unsigned int active_data_lanes;
-- bool sensor_embedded_data;
--
-- struct unicam_node node[MAX_NODES];
--};
--
--/* Hardware access */
--#define clk_write(dev, val) writel((val) | 0x5a000000, (dev)->clk_gate_base)
--#define clk_read(dev) readl((dev)->clk_gate_base)
--
--#define reg_read(dev, offset) readl((dev)->base + (offset))
--#define reg_write(dev, offset, val) writel(val, (dev)->base + (offset))
--
--#define reg_read_field(dev, offset, mask) get_field(reg_read((dev), (offset), \
-- mask))
--
--static inline int get_field(u32 value, u32 mask)
--{
-- return (value & mask) >> __ffs(mask);
--}
--
--static inline void set_field(u32 *valp, u32 field, u32 mask)
--{
-- u32 val = *valp;
--
-- val &= ~mask;
-- val |= (field << __ffs(mask)) & mask;
-- *valp = val;
--}
--
--static inline void reg_write_field(struct unicam_cfg *dev, u32 offset,
-- u32 field, u32 mask)
--{
-- u32 val = reg_read((dev), (offset));
--
-- set_field(&val, field, mask);
-- reg_write((dev), (offset), val);
--}
--
--/* Power management functions */
--static inline int unicam_runtime_get(struct unicam_device *dev)
--{
-- return pm_runtime_get_sync(&dev->pdev->dev);
--}
--
--static inline void unicam_runtime_put(struct unicam_device *dev)
--{
-- pm_runtime_put_sync(&dev->pdev->dev);
--}
--
--/* Format setup functions */
--static const struct unicam_fmt *find_format_by_code(u32 code)
--{
-- unsigned int i;
--
-- for (i = 0; i < ARRAY_SIZE(formats); i++) {
-- if (formats[i].code == code)
-- return &formats[i];
-- }
--
-- return NULL;
--}
--
--static int check_mbus_format(struct unicam_device *dev,
-- const struct unicam_fmt *format)
--{
-- struct v4l2_subdev_mbus_code_enum mbus_code;
-- int ret = 0;
-- int i;
--
-- for (i = 0; !ret && i < MAX_ENUM_MBUS_CODE; i++) {
-- memset(&mbus_code, 0, sizeof(mbus_code));
-- mbus_code.index = i;
-- mbus_code.pad = IMAGE_PAD;
-- mbus_code.which = V4L2_SUBDEV_FORMAT_ACTIVE;
--
-- ret = v4l2_subdev_call(dev->sensor, pad, enum_mbus_code,
-- NULL, &mbus_code);
--
-- if (!ret && mbus_code.code == format->code)
-- return 1;
-- }
--
-- return 0;
--}
--
--static const struct unicam_fmt *find_format_by_pix(struct unicam_device *dev,
-- u32 pixelformat)
--{
-- unsigned int i;
--
-- for (i = 0; i < ARRAY_SIZE(formats); i++) {
-- if (formats[i].fourcc == pixelformat ||
-- formats[i].repacked_fourcc == pixelformat) {
-- if (formats[i].check_variants &&
-- !check_mbus_format(dev, &formats[i]))
-- continue;
-- return &formats[i];
-- }
-- }
--
-- return NULL;
--}
--
--static inline unsigned int bytes_per_line(u32 width,
-- const struct unicam_fmt *fmt,
-- u32 v4l2_fourcc)
--{
-- if (v4l2_fourcc == fmt->repacked_fourcc)
-- /* Repacking always goes to 16bpp */
-- return ALIGN(width << 1, BPL_ALIGNMENT);
-- else
-- return ALIGN((width * fmt->depth) >> 3, BPL_ALIGNMENT);
--}
--
--static int __subdev_get_format(struct unicam_device *dev,
-- struct v4l2_mbus_framefmt *fmt, int pad_id)
--{
-- struct v4l2_subdev_format sd_fmt = {
-- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
-- .pad = pad_id
-- };
-- int ret;
--
-- ret = v4l2_subdev_call(dev->sensor, pad, get_fmt, dev->sensor_config,
-- &sd_fmt);
-- if (ret < 0)
-- return ret;
--
-- *fmt = sd_fmt.format;
--
-- unicam_dbg(1, dev, "%s %dx%d code:%04x\n", __func__,
-- fmt->width, fmt->height, fmt->code);
--
-- return 0;
--}
--
--static int __subdev_set_format(struct unicam_device *dev,
-- struct v4l2_mbus_framefmt *fmt, int pad_id)
--{
-- struct v4l2_subdev_format sd_fmt = {
-- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
-- .pad = pad_id
-- };
-- int ret;
--
-- sd_fmt.format = *fmt;
--
-- ret = v4l2_subdev_call(dev->sensor, pad, set_fmt, dev->sensor_config,
-- &sd_fmt);
-- if (ret < 0)
-- return ret;
--
-- if (pad_id == IMAGE_PAD)
-- unicam_dbg(1, dev, "%s %dx%d code:%04x\n", __func__, fmt->width,
-- fmt->height, fmt->code);
-- else
-- unicam_dbg(1, dev, "%s Embedded data code:%04x\n", __func__,
-- sd_fmt.format.code);
--
-- return 0;
--}
--
--static int unicam_calc_format_size_bpl(struct unicam_device *dev,
-- const struct unicam_fmt *fmt,
-- struct v4l2_format *f)
--{
-- unsigned int min_bytesperline;
--
-- v4l_bound_align_image(&f->fmt.pix.width, MIN_WIDTH, MAX_WIDTH, 2,
-- &f->fmt.pix.height, MIN_HEIGHT, MAX_HEIGHT, 0,
-- 0);
--
-- min_bytesperline = bytes_per_line(f->fmt.pix.width, fmt,
-- f->fmt.pix.pixelformat);
--
-- if (f->fmt.pix.bytesperline > min_bytesperline &&
-- f->fmt.pix.bytesperline <= MAX_BYTESPERLINE)
-- f->fmt.pix.bytesperline = ALIGN(f->fmt.pix.bytesperline,
-- BPL_ALIGNMENT);
-- else
-- f->fmt.pix.bytesperline = min_bytesperline;
--
-- f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
--
-- unicam_dbg(3, dev, "%s: fourcc: %08X size: %dx%d bpl:%d img_size:%d\n",
-- __func__,
-- f->fmt.pix.pixelformat,
-- f->fmt.pix.width, f->fmt.pix.height,
-- f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
--
-- return 0;
--}
--
--static int unicam_reset_format(struct unicam_node *node)
--{
-- struct unicam_device *dev = node->dev;
-- struct v4l2_mbus_framefmt mbus_fmt;
-- int ret;
--
-- if (dev->sensor_embedded_data || node->pad_id != METADATA_PAD) {
-- ret = __subdev_get_format(dev, &mbus_fmt, node->pad_id);
-- if (ret) {
-- unicam_err(dev, "Failed to get_format - ret %d\n", ret);
-- return ret;
-- }
--
-- if (mbus_fmt.code != node->fmt->code) {
-- unicam_err(dev, "code mismatch - fmt->code %08x, mbus_fmt.code %08x\n",
-- node->fmt->code, mbus_fmt.code);
-- return ret;
-- }
-- }
--
-- if (node->pad_id == IMAGE_PAD) {
-- v4l2_fill_pix_format(&node->v_fmt.fmt.pix, &mbus_fmt);
-- node->v_fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-- unicam_calc_format_size_bpl(dev, node->fmt, &node->v_fmt);
-- } else {
-- node->v_fmt.type = V4L2_BUF_TYPE_META_CAPTURE;
-- node->v_fmt.fmt.meta.dataformat = V4L2_META_FMT_SENSOR_DATA;
-- if (dev->sensor_embedded_data) {
-- node->v_fmt.fmt.meta.buffersize =
-- mbus_fmt.width * mbus_fmt.height;
-- node->embedded_lines = mbus_fmt.height;
-- } else {
-- node->v_fmt.fmt.meta.buffersize = UNICAM_EMBEDDED_SIZE;
-- node->embedded_lines = 1;
-- }
-- }
--
-- node->m_fmt = mbus_fmt;
-- return 0;
--}
--
--static void unicam_wr_dma_addr(struct unicam_cfg *cfg, dma_addr_t dmaaddr,
-- unsigned int buffer_size, int pad_id)
--{
-- dma_addr_t endaddr = dmaaddr + buffer_size;
--
-- /*
-- * dmaaddr and endaddr should be a 32-bit address with the top two bits
-- * set to 0x3 to signify uncached access through the Videocore memory
-- * controller.
-- */
-- BUG_ON((dmaaddr >> 30) != 0x3 && (endaddr >> 30) != 0x3);
--
-- if (pad_id == IMAGE_PAD) {
-- reg_write(cfg, UNICAM_IBSA0, dmaaddr);
-- reg_write(cfg, UNICAM_IBEA0, endaddr);
-- } else {
-- reg_write(cfg, UNICAM_DBSA0, dmaaddr);
-- reg_write(cfg, UNICAM_DBEA0, endaddr);
-- }
--}
--
--static inline unsigned int unicam_get_lines_done(struct unicam_device *dev)
--{
-- dma_addr_t start_addr, cur_addr;
-- unsigned int stride = dev->node[IMAGE_PAD].v_fmt.fmt.pix.bytesperline;
-- struct unicam_buffer *frm = dev->node[IMAGE_PAD].cur_frm;
--
-- if (!frm)
-- return 0;
--
-- start_addr = vb2_dma_contig_plane_dma_addr(&frm->vb.vb2_buf, 0);
-- cur_addr = reg_read(&dev->cfg, UNICAM_IBWP);
-- return (unsigned int)(cur_addr - start_addr) / stride;
--}
--
--static inline void unicam_schedule_next_buffer(struct unicam_node *node)
--{
-- struct unicam_device *dev = node->dev;
-- struct unicam_dmaqueue *dma_q = &node->dma_queue;
-- struct unicam_buffer *buf;
-- unsigned int size;
-- dma_addr_t addr;
--
-- buf = list_entry(dma_q->active.next, struct unicam_buffer, list);
-- node->next_frm = buf;
-- list_del(&buf->list);
--
-- addr = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0);
-- size = (node->pad_id == IMAGE_PAD) ?
-- dev->node[IMAGE_PAD].v_fmt.fmt.pix.sizeimage :
-- dev->node[METADATA_PAD].v_fmt.fmt.meta.buffersize;
--
-- unicam_wr_dma_addr(&dev->cfg, addr, size, node->pad_id);
--}
--
--static inline void unicam_schedule_dummy_buffer(struct unicam_node *node)
--{
-- struct unicam_device *dev = node->dev;
-- dma_addr_t addr = node->dummy_buf_dma_addr;
--
-- unicam_dbg(3, dev, "Scheduling dummy buffer for node %d\n",
-- node->pad_id);
--
-- unicam_wr_dma_addr(&dev->cfg, addr, DUMMY_BUF_SIZE, node->pad_id);
-- node->next_frm = NULL;
--}
--
--static inline void unicam_process_buffer_complete(struct unicam_node *node,
-- unsigned int sequence)
--{
-- node->cur_frm->vb.field = node->m_fmt.field;
-- node->cur_frm->vb.sequence = sequence;
--
-- vb2_buffer_done(&node->cur_frm->vb.vb2_buf, VB2_BUF_STATE_DONE);
--}
--
--static int unicam_num_nodes_streaming(struct unicam_device *dev)
--{
-- return dev->node[IMAGE_PAD].streaming +
-- dev->node[METADATA_PAD].streaming;
--}
--
--static int unicam_all_nodes_streaming(struct unicam_device *dev)
--{
-- int ret;
--
-- ret = dev->node[IMAGE_PAD].open && dev->node[IMAGE_PAD].streaming;
-- ret &= !dev->node[METADATA_PAD].open ||
-- dev->node[METADATA_PAD].streaming;
-- return ret;
--}
--
--static void unicam_queue_event_sof(struct unicam_device *unicam)
--{
-- struct v4l2_event event = {
-- .type = V4L2_EVENT_FRAME_SYNC,
-- .u.frame_sync.frame_sequence = unicam->sequence,
-- };
--
-- v4l2_event_queue(&unicam->node[IMAGE_PAD].video_dev, &event);
--}
--
--/*
-- * unicam_isr : ISR handler for unicam capture
-- * @irq: irq number
-- * @dev_id: dev_id ptr
-- *
-- * It changes status of the captured buffer, takes next buffer from the queue
-- * and sets its address in unicam registers
-- */
--static irqreturn_t unicam_isr(int irq, void *dev)
--{
-- struct unicam_device *unicam = (struct unicam_device *)dev;
-- struct unicam_cfg *cfg = &unicam->cfg;
-- unsigned int lines_done = unicam_get_lines_done(dev);
-- unsigned int sequence = unicam->sequence;
-- int num_nodes_streaming = unicam_num_nodes_streaming(dev);
-- int ista, sta;
-- u64 ts;
-- int i;
--
-- sta = reg_read(cfg, UNICAM_STA);
-- /* Write value back to clear the interrupts */
-- reg_write(cfg, UNICAM_STA, sta);
--
-- ista = reg_read(cfg, UNICAM_ISTA);
-- /* Write value back to clear the interrupts */
-- reg_write(cfg, UNICAM_ISTA, ista);
--
-- unicam_dbg(3, unicam, "ISR: ISTA: 0x%X, STA: 0x%X, sequence %d, lines done %d",
-- ista, sta, sequence, lines_done);
--
-- if (!(sta && (UNICAM_IS | UNICAM_PI0)))
-- return IRQ_HANDLED;
--
-- /*
-- * We must run the frame end handler first. If we have a valid next_frm
-- * and we get a simultaneout FE + FS interrupt, running the FS handler
-- * first would null out the next_frm ptr and we would have lost the
-- * buffer forever.
-- */
-- if (ista & UNICAM_FEI || sta & UNICAM_PI0) {
-- /*
-- * Ensure we have swapped buffers already as we can't
-- * stop the peripheral. If no buffer is available, use a
-- * dummy buffer to dump out frames until we get a new buffer
-- * to use.
-- */
-- for (i = 0; i < num_nodes_streaming; i++) {
-- if (unicam->node[i].cur_frm)
-- unicam_process_buffer_complete(&unicam->node[i],
-- sequence);
-- unicam->node[i].cur_frm = unicam->node[i].next_frm;
-- }
-- unicam->sequence++;
-- }
--
-- if (ista & UNICAM_FSI) {
-- /*
-- * Timestamp is to be when the first data byte was captured,
-- * aka frame start.
-- */
-- ts = ktime_get_ns();
-- for (i = 0; i < num_nodes_streaming; i++) {
-- if (unicam->node[i].cur_frm)
-- unicam->node[i].cur_frm->vb.vb2_buf.timestamp =
-- ts;
-- /*
-- * Set the next frame output to go to a dummy frame
-- * if we have not managed to obtain another frame
-- * from the queue.
-- */
-- unicam_schedule_dummy_buffer(&unicam->node[i]);
-- }
--
-- unicam_queue_event_sof(unicam);
-- }
-- /*
-- * Cannot swap buffer at frame end, there may be a race condition
-- * where the HW does not actually swap it if the new frame has
-- * already started.
-- */
-- if (ista & (UNICAM_FSI | UNICAM_LCI) && !(ista & UNICAM_FEI)) {
-- for (i = 0; i < num_nodes_streaming; i++) {
-- spin_lock(&unicam->node[i].dma_queue_lock);
-- if (!list_empty(&unicam->node[i].dma_queue.active) &&
-- !unicam->node[i].next_frm)
-- unicam_schedule_next_buffer(&unicam->node[i]);
-- spin_unlock(&unicam->node[i].dma_queue_lock);
-- }
-- }
--
-- if (reg_read(&unicam->cfg, UNICAM_ICTL) & UNICAM_FCM) {
-- /* Switch out of trigger mode if selected */
-- reg_write_field(&unicam->cfg, UNICAM_ICTL, 1, UNICAM_TFC);
-- reg_write_field(&unicam->cfg, UNICAM_ICTL, 0, UNICAM_FCM);
-- }
-- return IRQ_HANDLED;
--}
--
--static int unicam_querycap(struct file *file, void *priv,
-- struct v4l2_capability *cap)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
--
-- strlcpy(cap->driver, UNICAM_MODULE_NAME, sizeof(cap->driver));
-- strlcpy(cap->card, UNICAM_MODULE_NAME, sizeof(cap->card));
--
-- snprintf(cap->bus_info, sizeof(cap->bus_info),
-- "platform:%s", dev->v4l2_dev.name);
--
-- cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
-- V4L2_CAP_READWRITE | V4L2_CAP_DEVICE_CAPS |
-- V4L2_CAP_META_CAPTURE;
--
-- if (node->pad_id == IMAGE_PAD)
-- cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
-- else
-- cap->device_caps = V4L2_CAP_META_CAPTURE | V4L2_CAP_STREAMING;
--
-- return 0;
--}
--
--static int unicam_enum_fmt_vid_cap(struct file *file, void *priv,
-- struct v4l2_fmtdesc *f)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
-- struct v4l2_subdev_mbus_code_enum mbus_code;
-- const struct unicam_fmt *fmt = NULL;
-- int index = 0;
-- int ret = 0;
-- int i;
--
-- if (node->pad_id == METADATA_PAD)
-- return -EINVAL;
--
-- for (i = 0; !ret && i < MAX_ENUM_MBUS_CODE; i++) {
-- memset(&mbus_code, 0, sizeof(mbus_code));
-- mbus_code.index = i;
-- mbus_code.pad = IMAGE_PAD;
-- mbus_code.which = V4L2_SUBDEV_FORMAT_ACTIVE;
--
-- ret = v4l2_subdev_call(dev->sensor, pad, enum_mbus_code,
-- NULL, &mbus_code);
-- if (ret < 0) {
-- unicam_dbg(2, dev,
-- "subdev->enum_mbus_code idx %d returned %d - index invalid\n",
-- i, ret);
-- return -EINVAL;
-- }
--
-- fmt = find_format_by_code(mbus_code.code);
-- if (fmt) {
-- if (fmt->fourcc) {
-- if (index == f->index) {
-- f->pixelformat = fmt->fourcc;
-- break;
-- }
-- index++;
-- }
-- if (fmt->repacked_fourcc) {
-- if (index == f->index) {
-- f->pixelformat = fmt->repacked_fourcc;
-- break;
-- }
-- index++;
-- }
-- }
-- }
--
-- return 0;
--}
--
--static int unicam_g_fmt_vid_cap(struct file *file, void *priv,
-- struct v4l2_format *f)
--{
-- struct v4l2_mbus_framefmt mbus_fmt = {0};
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
-- const struct unicam_fmt *fmt = NULL;
-- int ret;
--
-- if (node->pad_id != IMAGE_PAD)
-- return -EINVAL;
--
-- /*
-- * If a flip has occurred in the sensor, the fmt code might have
-- * changed. So we will need to re-fetch the format from the subdevice.
-- */
-- ret = __subdev_get_format(dev, &mbus_fmt, node->pad_id);
-- if (ret)
-- return -EINVAL;
--
-- /* Find the V4L2 format from mbus code. We must match a known format. */
-- fmt = find_format_by_code(mbus_fmt.code);
-- if (!fmt)
-- return -EINVAL;
--
-- if (node->fmt != fmt) {
-- /*
-- * The sensor format has changed so the pixelformat needs to
-- * be updated. Try and retain the packed/unpacked choice if
-- * at all possible.
-- */
-- if (node->fmt->repacked_fourcc ==
-- node->v_fmt.fmt.pix.pixelformat)
-- /* Using the repacked format */
-- node->v_fmt.fmt.pix.pixelformat = fmt->repacked_fourcc;
-- else
-- /* Using the native format */
-- node->v_fmt.fmt.pix.pixelformat = fmt->fourcc;
--
-- node->fmt = fmt;
-- }
--
-- *f = node->v_fmt;
--
-- return 0;
--}
--
--static
--const struct unicam_fmt *get_first_supported_format(struct unicam_device *dev)
--{
-- struct v4l2_subdev_mbus_code_enum mbus_code;
-- const struct unicam_fmt *fmt = NULL;
-- int ret = 0;
-- int j;
--
-- for (j = 0; ret != -EINVAL && ret != -ENOIOCTLCMD; ++j) {
-- memset(&mbus_code, 0, sizeof(mbus_code));
-- mbus_code.index = j;
-- mbus_code.pad = IMAGE_PAD;
-- mbus_code.which = V4L2_SUBDEV_FORMAT_ACTIVE;
--
-- ret = v4l2_subdev_call(dev->sensor, pad, enum_mbus_code, NULL,
-- &mbus_code);
-- if (ret < 0) {
-- unicam_dbg(2, dev,
-- "subdev->enum_mbus_code idx %d returned %d - continue\n",
-- j, ret);
-- continue;
-- }
--
-- unicam_dbg(2, dev, "subdev %s: code: 0x%08x idx: %d\n",
-- dev->sensor->name, mbus_code.code, j);
--
-- fmt = find_format_by_code(mbus_code.code);
-- unicam_dbg(2, dev, "fmt 0x%08x returned as %p, V4L2 FOURCC 0x%08x, csi_dt 0x%02x\n",
-- mbus_code.code, fmt, fmt ? fmt->fourcc : 0,
-- fmt ? fmt->csi_dt : 0);
-- if (fmt)
-- return fmt;
-- }
--
-- return NULL;
--}
--
--static int unicam_try_fmt_vid_cap(struct file *file, void *priv,
-- struct v4l2_format *f)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
-- struct v4l2_subdev_format sd_fmt = {
-- .which = V4L2_SUBDEV_FORMAT_TRY,
-- .pad = IMAGE_PAD
-- };
-- struct v4l2_mbus_framefmt *mbus_fmt = &sd_fmt.format;
-- const struct unicam_fmt *fmt;
-- int ret;
--
-- if (node->pad_id == METADATA_PAD)
-- return -EINVAL;
--
-- fmt = find_format_by_pix(dev, f->fmt.pix.pixelformat);
-- if (!fmt) {
-- /* Pixel format not supported by unicam. Choose the first
-- * supported format, and let the sensor choose something else.
-- */
-- unicam_dbg(3, dev, "Fourcc format (0x%08x) not found. Use first format.\n",
-- f->fmt.pix.pixelformat);
--
-- fmt = &formats[0];
-- f->fmt.pix.pixelformat = fmt->fourcc;
-- }
--
-- v4l2_fill_mbus_format(mbus_fmt, &f->fmt.pix, fmt->code);
-- /*
-- * No support for receiving interlaced video, so never
-- * request it from the sensor subdev.
-- */
-- mbus_fmt->field = V4L2_FIELD_NONE;
--
-- ret = v4l2_subdev_call(dev->sensor, pad, set_fmt, dev->sensor_config,
-- &sd_fmt);
-- if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV)
-- return ret;
--
-- if (mbus_fmt->field != V4L2_FIELD_NONE)
-- unicam_info(dev, "Sensor trying to send interlaced video - results may be unpredictable\n");
--
-- v4l2_fill_pix_format(&f->fmt.pix, &sd_fmt.format);
-- if (mbus_fmt->code != fmt->code) {
-- /* Sensor has returned an alternate format */
-- fmt = find_format_by_code(mbus_fmt->code);
-- if (!fmt) {
-- /* The alternate format is one unicam can't support.
-- * Find the first format that is supported by both, and
-- * then set that.
-- */
-- fmt = get_first_supported_format(dev);
-- mbus_fmt->code = fmt->code;
--
-- ret = v4l2_subdev_call(dev->sensor, pad, set_fmt,
-- dev->sensor_config, &sd_fmt);
-- if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV)
-- return ret;
--
-- if (mbus_fmt->field != V4L2_FIELD_NONE)
-- unicam_info(dev, "Sensor trying to send interlaced video - results may be unpredictable\n");
--
-- v4l2_fill_pix_format(&f->fmt.pix, &sd_fmt.format);
--
-- if (mbus_fmt->code != fmt->code) {
-- /* We've set a format that the sensor reports
-- * as being supported, but it refuses to set it.
-- * Not much else we can do.
-- * Assume that the sensor driver may accept the
-- * format when it is set (rather than tried).
-- */
-- unicam_err(dev, "Sensor won't accept default format, and Unicam can't support sensor default\n");
-- }
-- }
--
-- if (fmt->fourcc)
-- f->fmt.pix.pixelformat = fmt->fourcc;
-- else
-- f->fmt.pix.pixelformat = fmt->repacked_fourcc;
-- }
--
-- return unicam_calc_format_size_bpl(dev, fmt, f);
--}
--
--static int unicam_s_fmt_vid_cap(struct file *file, void *priv,
-- struct v4l2_format *f)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
-- struct vb2_queue *q = &node->buffer_queue;
-- struct v4l2_mbus_framefmt mbus_fmt = {0};
-- const struct unicam_fmt *fmt;
-- int ret;
--
-- if (vb2_is_busy(q))
-- return -EBUSY;
--
-- ret = unicam_try_fmt_vid_cap(file, priv, f);
-- if (ret < 0)
-- return ret;
--
-- fmt = find_format_by_pix(dev, f->fmt.pix.pixelformat);
-- if (!fmt) {
-- /* Unknown pixel format - adopt a default.
-- * This shouldn't happen as try_fmt should have resolved any
-- * issues first.
-- */
-- fmt = get_first_supported_format(dev);
-- if (!fmt)
-- /* It shouldn't be possible to get here with no
-- * supported formats
-- */
-- return -EINVAL;
-- f->fmt.pix.pixelformat = fmt->fourcc;
-- return -EINVAL;
-- }
--
-- v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, fmt->code);
--
-- ret = __subdev_set_format(dev, &mbus_fmt, node->pad_id);
-- if (ret) {
-- unicam_dbg(3, dev, "%s __subdev_set_format failed %d\n",
-- __func__, ret);
-- return ret;
-- }
--
-- /* Just double check nothing has gone wrong */
-- if (mbus_fmt.code != fmt->code) {
-- unicam_dbg(3, dev,
-- "%s subdev changed format on us, this should not happen\n",
-- __func__);
-- return -EINVAL;
-- }
--
-- node->fmt = fmt;
-- node->v_fmt.fmt.pix.pixelformat = f->fmt.pix.pixelformat;
-- node->v_fmt.fmt.pix.bytesperline = f->fmt.pix.bytesperline;
-- unicam_reset_format(node);
--
-- unicam_dbg(3, dev,
-- "%s %dx%d, mbus_fmt 0x%08X, V4L2 pix 0x%08X.\n",
-- __func__, node->v_fmt.fmt.pix.width,
-- node->v_fmt.fmt.pix.height, mbus_fmt.code,
-- node->v_fmt.fmt.pix.pixelformat);
--
-- *f = node->v_fmt;
--
-- return 0;
--}
--
--static int unicam_enum_fmt_meta_cap(struct file *file, void *priv,
-- struct v4l2_fmtdesc *f)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
-- struct v4l2_subdev_mbus_code_enum mbus_code;
-- const struct unicam_fmt *fmt = NULL;
-- int ret = 0;
--
-- if (node->pad_id != METADATA_PAD || f->index != 0)
-- return -EINVAL;
--
-- if (dev->sensor_embedded_data) {
-- memset(&mbus_code, 0, sizeof(mbus_code));
-- mbus_code.index = f->index;
-- mbus_code.which = V4L2_SUBDEV_FORMAT_ACTIVE;
-- mbus_code.pad = METADATA_PAD;
--
-- ret = v4l2_subdev_call(dev->sensor, pad, enum_mbus_code, NULL,
-- &mbus_code);
-- if (ret < 0) {
-- unicam_dbg(2, dev,
-- "subdev->enum_mbus_code idx 0 returned %d - index invalid\n",
-- ret);
-- return -EINVAL;
-- }
-- } else {
-- mbus_code.code = MEDIA_BUS_FMT_SENSOR_DATA;
-- }
--
-- fmt = find_format_by_code(mbus_code.code);
-- if (fmt)
-- f->pixelformat = fmt->fourcc;
--
-- return 0;
--}
--
--static int unicam_g_fmt_meta_cap(struct file *file, void *priv,
-- struct v4l2_format *f)
--{
-- struct unicam_node *node = video_drvdata(file);
--
-- if (node->pad_id != METADATA_PAD)
-- return -EINVAL;
--
-- *f = node->v_fmt;
--
-- return 0;
--}
--
--static int unicam_try_fmt_meta_cap(struct file *file, void *priv,
-- struct v4l2_format *f)
--{
-- struct unicam_node *node = video_drvdata(file);
--
-- if (node->pad_id != METADATA_PAD)
-- return -EINVAL;
--
-- *f = node->v_fmt;
--
-- return 0;
--}
--
--static int unicam_s_fmt_meta_cap(struct file *file, void *priv,
-- struct v4l2_format *f)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
-- struct v4l2_mbus_framefmt mbus_fmt = { 0 };
-- const struct unicam_fmt *fmt;
-- int ret;
--
-- if (node->pad_id == IMAGE_PAD)
-- return -EINVAL;
--
-- if (dev->sensor_embedded_data) {
-- fmt = find_format_by_pix(dev, f->fmt.meta.dataformat);
-- if (!fmt) {
-- unicam_err(dev, "unknown format: V4L2 pix 0x%08x\n",
-- f->fmt.meta.dataformat);
-- return -EINVAL;
-- }
-- mbus_fmt.code = fmt->code;
-- ret = __subdev_set_format(dev, &mbus_fmt, node->pad_id);
-- if (ret) {
-- unicam_dbg(3, dev, "%s __subdev_set_format failed %d\n",
-- __func__, ret);
-- return ret;
-- }
-- }
--
-- *f = node->v_fmt;
--
-- unicam_dbg(3, dev, "%s size %d, V4L2 pix 0x%08x\n",
-- __func__, node->v_fmt.fmt.meta.buffersize,
-- node->v_fmt.fmt.meta.dataformat);
--
-- return 0;
--}
--
--static int unicam_queue_setup(struct vb2_queue *vq,
-- unsigned int *nbuffers,
-- unsigned int *nplanes,
-- unsigned int sizes[],
-- struct device *alloc_devs[])
--{
-- struct unicam_node *node = vb2_get_drv_priv(vq);
-- struct unicam_device *dev = node->dev;
-- unsigned int size = node->pad_id == IMAGE_PAD ?
-- node->v_fmt.fmt.pix.sizeimage :
-- node->v_fmt.fmt.meta.buffersize;
--
-- if (vq->num_buffers + *nbuffers < 3)
-- *nbuffers = 3 - vq->num_buffers;
--
-- if (*nplanes) {
-- if (sizes[0] < size) {
-- unicam_err(dev, "sizes[0] %i < size %u\n", sizes[0],
-- size);
-- return -EINVAL;
-- }
-- size = sizes[0];
-- }
--
-- *nplanes = 1;
-- sizes[0] = size;
--
-- return 0;
--}
--
--static int unicam_buffer_prepare(struct vb2_buffer *vb)
--{
-- struct unicam_node *node = vb2_get_drv_priv(vb->vb2_queue);
-- struct unicam_device *dev = node->dev;
-- struct unicam_buffer *buf = container_of(vb, struct unicam_buffer,
-- vb.vb2_buf);
-- unsigned long size;
--
-- if (WARN_ON(!node->fmt))
-- return -EINVAL;
--
-- size = node->pad_id == IMAGE_PAD ? node->v_fmt.fmt.pix.sizeimage :
-- node->v_fmt.fmt.meta.buffersize;
-- if (vb2_plane_size(vb, 0) < size) {
-- unicam_err(dev, "data will not fit into plane (%lu < %lu)\n",
-- vb2_plane_size(vb, 0), size);
-- return -EINVAL;
-- }
--
-- vb2_set_plane_payload(&buf->vb.vb2_buf, 0, size);
-- return 0;
--}
--
--static void unicam_buffer_queue(struct vb2_buffer *vb)
--{
-- struct unicam_node *node = vb2_get_drv_priv(vb->vb2_queue);
-- struct unicam_buffer *buf = container_of(vb, struct unicam_buffer,
-- vb.vb2_buf);
-- struct unicam_dmaqueue *dma_queue = &node->dma_queue;
-- unsigned long flags = 0;
--
-- spin_lock_irqsave(&node->dma_queue_lock, flags);
-- list_add_tail(&buf->list, &dma_queue->active);
-- spin_unlock_irqrestore(&node->dma_queue_lock, flags);
--}
--
--static void unicam_set_packing_config(struct unicam_device *dev)
--{
-- int pack, unpack;
-- u32 val;
--
-- if (dev->node[IMAGE_PAD].v_fmt.fmt.pix.pixelformat ==
-- dev->node[IMAGE_PAD].fmt->fourcc) {
-- unpack = UNICAM_PUM_NONE;
-- pack = UNICAM_PPM_NONE;
-- } else {
-- switch (dev->node[IMAGE_PAD].fmt->depth) {
-- case 8:
-- unpack = UNICAM_PUM_UNPACK8;
-- break;
-- case 10:
-- unpack = UNICAM_PUM_UNPACK10;
-- break;
-- case 12:
-- unpack = UNICAM_PUM_UNPACK12;
-- break;
-- case 14:
-- unpack = UNICAM_PUM_UNPACK14;
-- break;
-- case 16:
-- unpack = UNICAM_PUM_UNPACK16;
-- break;
-- default:
-- unpack = UNICAM_PUM_NONE;
-- break;
-- }
--
-- /* Repacking is always to 16bpp */
-- pack = UNICAM_PPM_PACK16;
-- }
--
-- val = 0;
-- set_field(&val, unpack, UNICAM_PUM_MASK);
-- set_field(&val, pack, UNICAM_PPM_MASK);
-- reg_write(&dev->cfg, UNICAM_IPIPE, val);
--}
--
--static void unicam_cfg_image_id(struct unicam_device *dev)
--{
-- struct unicam_cfg *cfg = &dev->cfg;
--
-- if (dev->bus_type == V4L2_MBUS_CSI2_DPHY) {
-- /* CSI2 mode */
-- reg_write(cfg, UNICAM_IDI0,
-- (dev->virtual_channel << 6) |
-- dev->node[IMAGE_PAD].fmt->csi_dt);
-- } else {
-- /* CCP2 mode */
-- reg_write(cfg, UNICAM_IDI0,
-- 0x80 | dev->node[IMAGE_PAD].fmt->csi_dt);
-- }
--}
--
--static void unicam_enable_ed(struct unicam_device *dev)
--{
-- struct unicam_cfg *cfg = &dev->cfg;
-- u32 val = reg_read(cfg, UNICAM_DCS);
--
-- set_field(&val, 2, UNICAM_EDL_MASK);
-- /* Do not wrap at the end of the embedded data buffer */
-- set_field(&val, 0, UNICAM_DBOB);
--
-- reg_write(cfg, UNICAM_DCS, val);
--}
--
--static void unicam_start_rx(struct unicam_device *dev, dma_addr_t *addr)
--{
-- struct unicam_cfg *cfg = &dev->cfg;
-- int line_int_freq = dev->node[IMAGE_PAD].v_fmt.fmt.pix.height >> 2;
-- unsigned int size, i;
-- u32 val;
--
-- if (line_int_freq < 128)
-- line_int_freq = 128;
--
-- /* Enable lane clocks */
-- val = 1;
-- for (i = 0; i < dev->active_data_lanes; i++)
-- val = val << 2 | 1;
-- clk_write(cfg, val);
--
-- /* Basic init */
-- reg_write(cfg, UNICAM_CTRL, UNICAM_MEM);
--
-- /* Enable analogue control, and leave in reset. */
-- val = UNICAM_AR;
-- set_field(&val, 7, UNICAM_CTATADJ_MASK);
-- set_field(&val, 7, UNICAM_PTATADJ_MASK);
-- reg_write(cfg, UNICAM_ANA, val);
-- usleep_range(1000, 2000);
--
-- /* Come out of reset */
-- reg_write_field(cfg, UNICAM_ANA, 0, UNICAM_AR);
--
-- /* Peripheral reset */
-- reg_write_field(cfg, UNICAM_CTRL, 1, UNICAM_CPR);
-- reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_CPR);
--
-- reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_CPE);
--
-- /* Enable Rx control. */
-- val = reg_read(cfg, UNICAM_CTRL);
-- if (dev->bus_type == V4L2_MBUS_CSI2_DPHY) {
-- set_field(&val, UNICAM_CPM_CSI2, UNICAM_CPM_MASK);
-- set_field(&val, UNICAM_DCM_STROBE, UNICAM_DCM_MASK);
-- } else {
-- set_field(&val, UNICAM_CPM_CCP2, UNICAM_CPM_MASK);
-- set_field(&val, dev->bus_flags, UNICAM_DCM_MASK);
-- }
-- /* Packet framer timeout */
-- set_field(&val, 0xf, UNICAM_PFT_MASK);
-- set_field(&val, 128, UNICAM_OET_MASK);
-- reg_write(cfg, UNICAM_CTRL, val);
--
-- reg_write(cfg, UNICAM_IHWIN, 0);
-- reg_write(cfg, UNICAM_IVWIN, 0);
--
-- /* AXI bus access QoS setup */
-- val = reg_read(&dev->cfg, UNICAM_PRI);
-- set_field(&val, 0, UNICAM_BL_MASK);
-- set_field(&val, 0, UNICAM_BS_MASK);
-- set_field(&val, 0xe, UNICAM_PP_MASK);
-- set_field(&val, 8, UNICAM_NP_MASK);
-- set_field(&val, 2, UNICAM_PT_MASK);
-- set_field(&val, 1, UNICAM_PE);
-- reg_write(cfg, UNICAM_PRI, val);
--
-- reg_write_field(cfg, UNICAM_ANA, 0, UNICAM_DDL);
--
-- /* Always start in trigger frame capture mode (UNICAM_FCM set) */
-- val = UNICAM_FSIE | UNICAM_FEIE | UNICAM_FCM | UNICAM_IBOB;
-- set_field(&val, line_int_freq, UNICAM_LCIE_MASK);
-- reg_write(cfg, UNICAM_ICTL, val);
-- reg_write(cfg, UNICAM_STA, UNICAM_STA_MASK_ALL);
-- reg_write(cfg, UNICAM_ISTA, UNICAM_ISTA_MASK_ALL);
--
-- /* tclk_term_en */
-- reg_write_field(cfg, UNICAM_CLT, 2, UNICAM_CLT1_MASK);
-- /* tclk_settle */
-- reg_write_field(cfg, UNICAM_CLT, 6, UNICAM_CLT2_MASK);
-- /* td_term_en */
-- reg_write_field(cfg, UNICAM_DLT, 2, UNICAM_DLT1_MASK);
-- /* ths_settle */
-- reg_write_field(cfg, UNICAM_DLT, 6, UNICAM_DLT2_MASK);
-- /* trx_enable */
-- reg_write_field(cfg, UNICAM_DLT, 0, UNICAM_DLT3_MASK);
--
-- reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_SOE);
--
-- /* Packet compare setup - required to avoid missing frame ends */
-- val = 0;
-- set_field(&val, 1, UNICAM_PCE);
-- set_field(&val, 1, UNICAM_GI);
-- set_field(&val, 1, UNICAM_CPH);
-- set_field(&val, 0, UNICAM_PCVC_MASK);
-- set_field(&val, 1, UNICAM_PCDT_MASK);
-- reg_write(cfg, UNICAM_CMP0, val);
--
-- /* Enable clock lane and set up terminations */
-- val = 0;
-- if (dev->bus_type == V4L2_MBUS_CSI2_DPHY) {
-- /* CSI2 */
-- set_field(&val, 1, UNICAM_CLE);
-- set_field(&val, 1, UNICAM_CLLPE);
-- if (dev->bus_flags & V4L2_MBUS_CSI2_CONTINUOUS_CLOCK) {
-- set_field(&val, 1, UNICAM_CLTRE);
-- set_field(&val, 1, UNICAM_CLHSE);
-- }
-- } else {
-- /* CCP2 */
-- set_field(&val, 1, UNICAM_CLE);
-- set_field(&val, 1, UNICAM_CLHSE);
-- set_field(&val, 1, UNICAM_CLTRE);
-- }
-- reg_write(cfg, UNICAM_CLK, val);
--
-- /*
-- * Enable required data lanes with appropriate terminations.
-- * The same value needs to be written to UNICAM_DATn registers for
-- * the active lanes, and 0 for inactive ones.
-- */
-- val = 0;
-- if (dev->bus_type == V4L2_MBUS_CSI2_DPHY) {
-- /* CSI2 */
-- set_field(&val, 1, UNICAM_DLE);
-- set_field(&val, 1, UNICAM_DLLPE);
-- if (dev->bus_flags & V4L2_MBUS_CSI2_CONTINUOUS_CLOCK) {
-- set_field(&val, 1, UNICAM_DLTRE);
-- set_field(&val, 1, UNICAM_DLHSE);
-- }
-- } else {
-- /* CCP2 */
-- set_field(&val, 1, UNICAM_DLE);
-- set_field(&val, 1, UNICAM_DLHSE);
-- set_field(&val, 1, UNICAM_DLTRE);
-- }
-- reg_write(cfg, UNICAM_DAT0, val);
--
-- if (dev->active_data_lanes == 1)
-- val = 0;
-- reg_write(cfg, UNICAM_DAT1, val);
--
-- if (dev->max_data_lanes > 2) {
-- /*
-- * Registers UNICAM_DAT2 and UNICAM_DAT3 only valid if the
-- * instance supports more than 2 data lanes.
-- */
-- if (dev->active_data_lanes == 2)
-- val = 0;
-- reg_write(cfg, UNICAM_DAT2, val);
--
-- if (dev->active_data_lanes == 3)
-- val = 0;
-- reg_write(cfg, UNICAM_DAT3, val);
-- }
--
-- reg_write(&dev->cfg, UNICAM_IBLS,
-- dev->node[IMAGE_PAD].v_fmt.fmt.pix.bytesperline);
-- size = dev->node[IMAGE_PAD].v_fmt.fmt.pix.sizeimage;
-- unicam_wr_dma_addr(&dev->cfg, addr[IMAGE_PAD], size, IMAGE_PAD);
-- unicam_set_packing_config(dev);
-- unicam_cfg_image_id(dev);
--
-- val = reg_read(cfg, UNICAM_MISC);
-- set_field(&val, 1, UNICAM_FL0);
-- set_field(&val, 1, UNICAM_FL1);
-- reg_write(cfg, UNICAM_MISC, val);
--
-- if (dev->node[METADATA_PAD].streaming && dev->sensor_embedded_data) {
-- size = dev->node[METADATA_PAD].v_fmt.fmt.meta.buffersize;
-- unicam_enable_ed(dev);
-- unicam_wr_dma_addr(&dev->cfg, addr[METADATA_PAD], size,
-- METADATA_PAD);
-- }
--
-- /* Enable peripheral */
-- reg_write_field(cfg, UNICAM_CTRL, 1, UNICAM_CPE);
--
-- /* Load image pointers */
-- reg_write_field(cfg, UNICAM_ICTL, 1, UNICAM_LIP_MASK);
--
-- /* Load embedded data buffer pointers if needed */
-- if (dev->node[METADATA_PAD].streaming && dev->sensor_embedded_data)
-- reg_write_field(cfg, UNICAM_DCS, 1, UNICAM_LDP);
--
-- /*
-- * Enable trigger only for the first frame to
-- * sync correctly to the FS from the source.
-- */
-- reg_write_field(cfg, UNICAM_ICTL, 1, UNICAM_TFC);
--}
--
--static void unicam_disable(struct unicam_device *dev)
--{
-- struct unicam_cfg *cfg = &dev->cfg;
--
-- /* Analogue lane control disable */
-- reg_write_field(cfg, UNICAM_ANA, 1, UNICAM_DDL);
--
-- /* Stop the output engine */
-- reg_write_field(cfg, UNICAM_CTRL, 1, UNICAM_SOE);
--
-- /* Disable the data lanes. */
-- reg_write(cfg, UNICAM_DAT0, 0);
-- reg_write(cfg, UNICAM_DAT1, 0);
--
-- if (dev->max_data_lanes > 2) {
-- reg_write(cfg, UNICAM_DAT2, 0);
-- reg_write(cfg, UNICAM_DAT3, 0);
-- }
--
-- /* Peripheral reset */
-- reg_write_field(cfg, UNICAM_CTRL, 1, UNICAM_CPR);
-- usleep_range(50, 100);
-- reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_CPR);
--
-- /* Disable peripheral */
-- reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_CPE);
--
-- /* Clear ED setup */
-- reg_write(cfg, UNICAM_DCS, 0);
--
-- /* Disable all lane clocks */
-- clk_write(cfg, 0);
--}
--
--static int unicam_start_streaming(struct vb2_queue *vq, unsigned int count)
--{
-- struct unicam_node *node = vb2_get_drv_priv(vq);
-- struct unicam_device *dev = node->dev;
-- struct unicam_buffer *buf;
-- dma_addr_t buffer_addr[MAX_NODES] = { 0 };
-- int num_nodes_streaming;
-- unsigned long flags;
-- int ret, i;
--
-- node->streaming = 1;
-- if (!unicam_all_nodes_streaming(dev)) {
-- unicam_dbg(3, dev, "Not all nodes are streaming yet.");
-- return 0;
-- }
--
-- dev->sequence = 0;
-- ret = unicam_runtime_get(dev);
-- if (ret < 0) {
-- unicam_dbg(3, dev, "unicam_runtime_get failed\n");
-- return ret;
-- }
--
-- dev->active_data_lanes = dev->max_data_lanes;
-- if (dev->bus_type == V4L2_MBUS_CSI2_DPHY &&
-- v4l2_subdev_has_op(dev->sensor, video, g_mbus_config)) {
-- struct v4l2_mbus_config mbus_config;
--
-- ret = v4l2_subdev_call(dev->sensor, video, g_mbus_config,
-- &mbus_config);
-- if (ret < 0) {
-- unicam_dbg(3, dev, "g_mbus_config failed\n");
-- goto err_pm_put;
-- }
--
-- dev->active_data_lanes =
-- (mbus_config.flags & V4L2_MBUS_CSI2_LANE_MASK) >>
-- __ffs(V4L2_MBUS_CSI2_LANE_MASK);
-- if (!dev->active_data_lanes)
-- dev->active_data_lanes = dev->max_data_lanes;
-- }
-- if (dev->active_data_lanes > dev->max_data_lanes) {
-- unicam_err(dev, "Device has requested %u data lanes, which is >%u configured in DT\n",
-- dev->active_data_lanes, dev->max_data_lanes);
-- ret = -EINVAL;
-- goto err_pm_put;
-- }
--
-- unicam_dbg(1, dev, "Running with %u data lanes\n",
-- dev->active_data_lanes);
--
-- ret = clk_set_rate(dev->clock, 100 * 1000 * 1000);
-- if (ret) {
-- unicam_err(dev, "failed to set up clock\n");
-- goto err_pm_put;
-- }
--
-- ret = clk_prepare_enable(dev->clock);
-- if (ret) {
-- unicam_err(dev, "Failed to enable CSI clock: %d\n", ret);
-- goto err_pm_put;
-- }
--
-- num_nodes_streaming = unicam_num_nodes_streaming(dev);
-- for (i = 0; i < num_nodes_streaming; i++) {
-- spin_lock_irqsave(&dev->node[i].dma_queue_lock, flags);
-- buf = list_entry(dev->node[i].dma_queue.active.next,
-- struct unicam_buffer, list);
-- dev->node[i].cur_frm = buf;
-- dev->node[i].next_frm = buf;
-- list_del(&buf->list);
-- spin_unlock_irqrestore(&dev->node[i].dma_queue_lock, flags);
-- buffer_addr[i] =
-- vb2_dma_contig_plane_dma_addr(&dev->node[i].cur_frm->vb.vb2_buf,
-- 0);
-- }
--
-- unicam_start_rx(dev, buffer_addr);
--
-- ret = v4l2_subdev_call(dev->sensor, video, s_stream, 1);
-- if (ret < 0) {
-- unicam_err(dev, "stream on failed in subdev\n");
-- goto err_disable_unicam;
-- }
--
-- return 0;
--
--err_disable_unicam:
-- node->streaming = 0;
-- unicam_disable(dev);
-- clk_disable_unprepare(dev->clock);
--err_pm_put:
-- unicam_runtime_put(dev);
--
-- return ret;
--}
--
--static void unicam_stop_streaming(struct vb2_queue *vq)
--{
-- struct unicam_node *node = vb2_get_drv_priv(vq);
-- struct unicam_device *dev = node->dev;
-- struct unicam_dmaqueue *dma_q = &node->dma_queue;
-- struct unicam_buffer *buf, *tmp;
-- unsigned long flags;
--
-- node->streaming = 0;
--
-- if (node->pad_id == IMAGE_PAD) {
-- /* Stop streaming the sensor and disable the peripheral.
-- * We cannot continue streaming embedded data with the
-- * image pad disabled.
-- */
-- if (v4l2_subdev_call(dev->sensor, video, s_stream, 0) < 0)
-- unicam_err(dev, "stream off failed in subdev\n");
--
-- unicam_disable(dev);
-- clk_disable_unprepare(dev->clock);
-- unicam_runtime_put(dev);
--
-- } else if (node->pad_id == METADATA_PAD) {
-- /* Allow the hardware to spin in the dummy buffer.
-- * This is only really needed if the embedded data pad is
-- * disabled before the image pad. The 0x3 in the top two bits
-- * signifies uncached accesses through the Videocore memory
-- * controller.
-- */
-- unicam_wr_dma_addr(&dev->cfg, node->dummy_buf_dma_addr,
-- DUMMY_BUF_SIZE, METADATA_PAD);
-- }
--
-- /* Clear all queued buffers for the node */
-- spin_lock_irqsave(&node->dma_queue_lock, flags);
-- list_for_each_entry_safe(buf, tmp, &dma_q->active, list) {
-- list_del(&buf->list);
-- vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
-- }
--
-- if (node->cur_frm)
-- vb2_buffer_done(&node->cur_frm->vb.vb2_buf,
-- VB2_BUF_STATE_ERROR);
-- if (node->next_frm && node->cur_frm != node->next_frm)
-- vb2_buffer_done(&node->next_frm->vb.vb2_buf,
-- VB2_BUF_STATE_ERROR);
--
-- node->cur_frm = NULL;
-- node->next_frm = NULL;
-- spin_unlock_irqrestore(&node->dma_queue_lock, flags);
--}
--
--static int unicam_enum_input(struct file *file, void *priv,
-- struct v4l2_input *inp)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
--
-- if (inp->index != 0)
-- return -EINVAL;
--
-- inp->type = V4L2_INPUT_TYPE_CAMERA;
-- if (v4l2_subdev_has_op(dev->sensor, video, s_dv_timings)) {
-- inp->capabilities = V4L2_IN_CAP_DV_TIMINGS;
-- inp->std = 0;
-- } else if (v4l2_subdev_has_op(dev->sensor, video, s_std)) {
-- inp->capabilities = V4L2_IN_CAP_STD;
-- if (v4l2_subdev_call(dev->sensor, video, g_tvnorms, &inp->std)
-- < 0)
-- inp->std = V4L2_STD_ALL;
-- } else {
-- inp->capabilities = 0;
-- inp->std = 0;
-- }
-- sprintf(inp->name, "Camera 0");
-- return 0;
--}
--
--static int unicam_g_input(struct file *file, void *priv, unsigned int *i)
--{
-- *i = 0;
--
-- return 0;
--}
--
--static int unicam_s_input(struct file *file, void *priv, unsigned int i)
--{
-- /*
-- * FIXME: Ideally we would like to be able to query the source
-- * subdevice for information over the input connectors it supports,
-- * and map that through in to a call to video_ops->s_routing.
-- * There is no infrastructure support for defining that within
-- * devicetree at present. Until that is implemented we can't
-- * map a user physical connector number to s_routing input number.
-- */
-- if (i > 0)
-- return -EINVAL;
--
-- return 0;
--}
--
--static int unicam_querystd(struct file *file, void *priv,
-- v4l2_std_id *std)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
--
-- return v4l2_subdev_call(dev->sensor, video, querystd, std);
--}
--
--static int unicam_g_std(struct file *file, void *priv, v4l2_std_id *std)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
--
-- return v4l2_subdev_call(dev->sensor, video, g_std, std);
--}
--
--static int unicam_s_std(struct file *file, void *priv, v4l2_std_id std)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
-- int ret;
-- v4l2_std_id current_std;
--
-- ret = v4l2_subdev_call(dev->sensor, video, g_std, &current_std);
-- if (ret)
-- return ret;
--
-- if (std == current_std)
-- return 0;
--
-- if (vb2_is_busy(&node->buffer_queue))
-- return -EBUSY;
--
-- ret = v4l2_subdev_call(dev->sensor, video, s_std, std);
--
-- /* Force recomputation of bytesperline */
-- node->v_fmt.fmt.pix.bytesperline = 0;
--
-- unicam_reset_format(node);
--
-- return ret;
--}
--
--static int unicam_s_edid(struct file *file, void *priv, struct v4l2_edid *edid)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
--
-- return v4l2_subdev_call(dev->sensor, pad, set_edid, edid);
--}
--
--static int unicam_g_edid(struct file *file, void *priv, struct v4l2_edid *edid)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
--
-- return v4l2_subdev_call(dev->sensor, pad, get_edid, edid);
--}
--
--static int unicam_s_selection(struct file *file, void *priv,
-- struct v4l2_selection *sel)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
-- struct v4l2_subdev_selection sdsel = {
-- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
-- .target = sel->target,
-- .flags = sel->flags,
-- .r = sel->r,
-- };
--
-- return v4l2_subdev_call(dev->sensor, pad, set_selection, NULL, &sdsel);
--}
--
--static int unicam_g_selection(struct file *file, void *priv,
-- struct v4l2_selection *sel)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
-- struct v4l2_subdev_selection sdsel = {
-- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
-- .target = sel->target,
-- };
-- int ret;
--
-- ret = v4l2_subdev_call(dev->sensor, pad, get_selection, NULL, &sdsel);
-- if (!ret)
-- sel->r = sdsel.r;
--
-- return ret;
--}
--
--static int unicam_enum_framesizes(struct file *file, void *priv,
-- struct v4l2_frmsizeenum *fsize)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
-- const struct unicam_fmt *fmt;
-- struct v4l2_subdev_frame_size_enum fse;
-- int ret;
--
-- if (node->pad_id == IMAGE_PAD) {
-- /* check for valid format */
-- fmt = find_format_by_pix(dev, fsize->pixel_format);
-- if (!fmt) {
-- unicam_dbg(3, dev, "Invalid pixel code: %x\n",
-- fsize->pixel_format);
-- return -EINVAL;
-- }
-- fse.code = fmt->code;
-- } else {
-- /* This pad is for embedded data, so just set the format */
-- fse.code = MEDIA_BUS_FMT_SENSOR_DATA;
-- }
--
-- fse.which = V4L2_SUBDEV_FORMAT_ACTIVE;
-- fse.index = fsize->index;
-- fse.pad = node->pad_id;
--
-- ret = v4l2_subdev_call(dev->sensor, pad, enum_frame_size, NULL, &fse);
-- if (ret)
-- return ret;
--
-- unicam_dbg(1, dev, "%s: index: %d code: %x W:[%d,%d] H:[%d,%d]\n",
-- __func__, fse.index, fse.code, fse.min_width, fse.max_width,
-- fse.min_height, fse.max_height);
--
-- fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
-- fsize->discrete.width = fse.max_width;
-- fsize->discrete.height = fse.max_height;
--
-- return 0;
--}
--
--static int unicam_enum_frameintervals(struct file *file, void *priv,
-- struct v4l2_frmivalenum *fival)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
-- const struct unicam_fmt *fmt;
-- struct v4l2_subdev_frame_interval_enum fie = {
-- .index = fival->index,
-- .width = fival->width,
-- .height = fival->height,
-- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
-- };
-- int ret;
--
-- fmt = find_format_by_pix(dev, fival->pixel_format);
-- if (!fmt)
-- return -EINVAL;
--
-- fie.code = fmt->code;
-- ret = v4l2_subdev_call(dev->sensor, pad, enum_frame_interval,
-- NULL, &fie);
-- if (ret)
-- return ret;
--
-- fival->type = V4L2_FRMIVAL_TYPE_DISCRETE;
-- fival->discrete = fie.interval;
--
-- return 0;
--}
--
--static int unicam_g_parm(struct file *file, void *fh, struct v4l2_streamparm *a)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
--
-- return v4l2_g_parm_cap(video_devdata(file), dev->sensor, a);
--}
--
--static int unicam_s_parm(struct file *file, void *fh, struct v4l2_streamparm *a)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
--
-- return v4l2_s_parm_cap(video_devdata(file), dev->sensor, a);
--}
--
--static int unicam_g_dv_timings(struct file *file, void *priv,
-- struct v4l2_dv_timings *timings)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
--
-- return v4l2_subdev_call(dev->sensor, video, g_dv_timings, timings);
--}
--
--static int unicam_s_dv_timings(struct file *file, void *priv,
-- struct v4l2_dv_timings *timings)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
-- struct v4l2_dv_timings current_timings;
-- int ret;
--
-- ret = v4l2_subdev_call(dev->sensor, video, g_dv_timings,
-- &current_timings);
--
-- if (v4l2_match_dv_timings(timings, &current_timings, 0, false))
-- return 0;
--
-- if (vb2_is_busy(&node->buffer_queue))
-- return -EBUSY;
--
-- ret = v4l2_subdev_call(dev->sensor, video, s_dv_timings, timings);
--
-- /* Force recomputation of bytesperline */
-- node->v_fmt.fmt.pix.bytesperline = 0;
--
-- unicam_reset_format(node);
--
-- return ret;
--}
--
--static int unicam_query_dv_timings(struct file *file, void *priv,
-- struct v4l2_dv_timings *timings)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
--
-- return v4l2_subdev_call(dev->sensor, video, query_dv_timings, timings);
--}
--
--static int unicam_enum_dv_timings(struct file *file, void *priv,
-- struct v4l2_enum_dv_timings *timings)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
--
-- return v4l2_subdev_call(dev->sensor, pad, enum_dv_timings, timings);
--}
--
--static int unicam_dv_timings_cap(struct file *file, void *priv,
-- struct v4l2_dv_timings_cap *cap)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
--
-- return v4l2_subdev_call(dev->sensor, pad, dv_timings_cap, cap);
--}
--
--static int unicam_subscribe_event(struct v4l2_fh *fh,
-- const struct v4l2_event_subscription *sub)
--{
-- switch (sub->type) {
-- case V4L2_EVENT_FRAME_SYNC:
-- return v4l2_event_subscribe(fh, sub, 2, NULL);
-- case V4L2_EVENT_SOURCE_CHANGE:
-- return v4l2_event_subscribe(fh, sub, 4, NULL);
-- }
--
-- return v4l2_ctrl_subscribe_event(fh, sub);
--}
--
--static int unicam_log_status(struct file *file, void *fh)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
-- struct unicam_cfg *cfg = &dev->cfg;
-- u32 reg;
--
-- /* status for sub devices */
-- v4l2_device_call_all(&dev->v4l2_dev, 0, core, log_status);
--
-- unicam_info(dev, "-----Receiver status-----\n");
-- unicam_info(dev, "V4L2 width/height: %ux%u\n",
-- node->v_fmt.fmt.pix.width, node->v_fmt.fmt.pix.height);
-- unicam_info(dev, "Mediabus format: %08x\n", node->fmt->code);
-- unicam_info(dev, "V4L2 format: %08x\n",
-- node->v_fmt.fmt.pix.pixelformat);
-- reg = reg_read(&dev->cfg, UNICAM_IPIPE);
-- unicam_info(dev, "Unpacking/packing: %u / %u\n",
-- get_field(reg, UNICAM_PUM_MASK),
-- get_field(reg, UNICAM_PPM_MASK));
-- unicam_info(dev, "----Live data----\n");
-- unicam_info(dev, "Programmed stride: %4u\n",
-- reg_read(cfg, UNICAM_IBLS));
-- unicam_info(dev, "Detected resolution: %ux%u\n",
-- reg_read(cfg, UNICAM_IHSTA),
-- reg_read(cfg, UNICAM_IVSTA));
-- unicam_info(dev, "Write pointer: %08x\n",
-- reg_read(cfg, UNICAM_IBWP));
--
-- return 0;
--}
--
--static void unicam_notify(struct v4l2_subdev *sd,
-- unsigned int notification, void *arg)
--{
-- struct unicam_device *dev =
-- container_of(sd->v4l2_dev, struct unicam_device, v4l2_dev);
--
-- switch (notification) {
-- case V4L2_DEVICE_NOTIFY_EVENT:
-- v4l2_event_queue(&dev->node[IMAGE_PAD].video_dev, arg);
-- break;
-- default:
-- break;
-- }
--}
--
--static const struct vb2_ops unicam_video_qops = {
-- .wait_prepare = vb2_ops_wait_prepare,
-- .wait_finish = vb2_ops_wait_finish,
-- .queue_setup = unicam_queue_setup,
-- .buf_prepare = unicam_buffer_prepare,
-- .buf_queue = unicam_buffer_queue,
-- .start_streaming = unicam_start_streaming,
-- .stop_streaming = unicam_stop_streaming,
--};
--
--/*
-- * unicam_open : This function is based on the v4l2_fh_open helper function.
-- * It has been augmented to handle sensor subdevice power management,
-- */
--static int unicam_open(struct file *file)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
-- int ret;
--
-- mutex_lock(&node->lock);
--
-- ret = v4l2_fh_open(file);
-- if (ret) {
-- unicam_err(dev, "v4l2_fh_open failed\n");
-- goto unlock;
-- }
--
-- node->open++;
--
-- if (!v4l2_fh_is_singular_file(file))
-- goto unlock;
--
-- ret = v4l2_subdev_call(dev->sensor, core, s_power, 1);
-- if (ret < 0 && ret != -ENOIOCTLCMD) {
-- v4l2_fh_release(file);
-- node->open--;
-- goto unlock;
-- }
--
-- ret = 0;
--
--unlock:
-- mutex_unlock(&node->lock);
-- return ret;
--}
--
--static int unicam_release(struct file *file)
--{
-- struct unicam_node *node = video_drvdata(file);
-- struct unicam_device *dev = node->dev;
-- struct v4l2_subdev *sd = dev->sensor;
-- bool fh_singular;
-- int ret;
--
-- mutex_lock(&node->lock);
--
-- fh_singular = v4l2_fh_is_singular_file(file);
--
-- ret = _vb2_fop_release(file, NULL);
--
-- if (fh_singular)
-- v4l2_subdev_call(sd, core, s_power, 0);
--
-- node->open--;
-- mutex_unlock(&node->lock);
--
-- return ret;
--}
--
--/* unicam capture driver file operations */
--static const struct v4l2_file_operations unicam_fops = {
-- .owner = THIS_MODULE,
-- .open = unicam_open,
-- .release = unicam_release,
-- .read = vb2_fop_read,
-- .poll = vb2_fop_poll,
-- .unlocked_ioctl = video_ioctl2,
-- .mmap = vb2_fop_mmap,
--};
--
--/* unicam capture ioctl operations */
--static const struct v4l2_ioctl_ops unicam_ioctl_ops = {
-- .vidioc_querycap = unicam_querycap,
-- .vidioc_enum_fmt_vid_cap = unicam_enum_fmt_vid_cap,
-- .vidioc_g_fmt_vid_cap = unicam_g_fmt_vid_cap,
-- .vidioc_s_fmt_vid_cap = unicam_s_fmt_vid_cap,
-- .vidioc_try_fmt_vid_cap = unicam_try_fmt_vid_cap,
--
-- .vidioc_enum_fmt_meta_cap = unicam_enum_fmt_meta_cap,
-- .vidioc_g_fmt_meta_cap = unicam_g_fmt_meta_cap,
-- .vidioc_s_fmt_meta_cap = unicam_s_fmt_meta_cap,
-- .vidioc_try_fmt_meta_cap = unicam_try_fmt_meta_cap,
--
-- .vidioc_enum_input = unicam_enum_input,
-- .vidioc_g_input = unicam_g_input,
-- .vidioc_s_input = unicam_s_input,
--
-- .vidioc_querystd = unicam_querystd,
-- .vidioc_s_std = unicam_s_std,
-- .vidioc_g_std = unicam_g_std,
--
-- .vidioc_g_edid = unicam_g_edid,
-- .vidioc_s_edid = unicam_s_edid,
--
-- .vidioc_enum_framesizes = unicam_enum_framesizes,
-- .vidioc_enum_frameintervals = unicam_enum_frameintervals,
--
-- .vidioc_g_selection = unicam_g_selection,
-- .vidioc_s_selection = unicam_s_selection,
--
-- .vidioc_g_parm = unicam_g_parm,
-- .vidioc_s_parm = unicam_s_parm,
--
-- .vidioc_s_dv_timings = unicam_s_dv_timings,
-- .vidioc_g_dv_timings = unicam_g_dv_timings,
-- .vidioc_query_dv_timings = unicam_query_dv_timings,
-- .vidioc_enum_dv_timings = unicam_enum_dv_timings,
-- .vidioc_dv_timings_cap = unicam_dv_timings_cap,
--
-- .vidioc_reqbufs = vb2_ioctl_reqbufs,
-- .vidioc_create_bufs = vb2_ioctl_create_bufs,
-- .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
-- .vidioc_querybuf = vb2_ioctl_querybuf,
-- .vidioc_qbuf = vb2_ioctl_qbuf,
-- .vidioc_dqbuf = vb2_ioctl_dqbuf,
-- .vidioc_expbuf = vb2_ioctl_expbuf,
-- .vidioc_streamon = vb2_ioctl_streamon,
-- .vidioc_streamoff = vb2_ioctl_streamoff,
--
-- .vidioc_log_status = unicam_log_status,
-- .vidioc_subscribe_event = unicam_subscribe_event,
-- .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
--};
--
--static int
--unicam_async_bound(struct v4l2_async_notifier *notifier,
-- struct v4l2_subdev *subdev,
-- struct v4l2_async_subdev *asd)
--{
-- struct unicam_device *unicam = container_of(notifier->v4l2_dev,
-- struct unicam_device, v4l2_dev);
--
-- if (unicam->sensor) {
-- unicam_info(unicam, "Rejecting subdev %s (Already set!!)",
-- subdev->name);
-- return 0;
-- }
--
-- unicam->sensor = subdev;
-- unicam_dbg(1, unicam, "Using sensor %s for capture\n", subdev->name);
--
-- return 0;
--}
--
--static int register_node(struct unicam_device *unicam, struct unicam_node *node,
-- enum v4l2_buf_type type, int pad_id)
--{
-- struct video_device *vdev;
-- struct vb2_queue *q;
-- struct v4l2_mbus_framefmt mbus_fmt = {0};
-- const struct unicam_fmt *fmt;
-- int ret;
--
-- if (unicam->sensor_embedded_data || pad_id != METADATA_PAD) {
-- ret = __subdev_get_format(unicam, &mbus_fmt, pad_id);
-- if (ret) {
-- unicam_err(unicam, "Failed to get_format - ret %d\n",
-- ret);
-- return ret;
-- }
--
-- fmt = find_format_by_code(mbus_fmt.code);
-- if (!fmt) {
-- /* Find the first format that the sensor and unicam both
-- * support
-- */
-- fmt = get_first_supported_format(unicam);
--
-- if (!fmt)
-- /* No compatible formats */
-- return -EINVAL;
--
-- mbus_fmt.code = fmt->code;
-- ret = __subdev_set_format(unicam, &mbus_fmt, pad_id);
-- if (ret)
-- return -EINVAL;
-- }
-- if (mbus_fmt.field != V4L2_FIELD_NONE) {
-- /* Interlaced not supported - disable it now. */
-- mbus_fmt.field = V4L2_FIELD_NONE;
-- ret = __subdev_set_format(unicam, &mbus_fmt, pad_id);
-- if (ret)
-- return -EINVAL;
-- }
-- } else {
-- /* Fix this node format as embedded data. */
-- fmt = find_format_by_code(MEDIA_BUS_FMT_SENSOR_DATA);
-- }
--
-- node->dev = unicam;
-- node->pad_id = pad_id;
-- node->fmt = fmt;
-- if (fmt->fourcc) {
-- if (fmt->fourcc != V4L2_META_FMT_SENSOR_DATA)
-- node->v_fmt.fmt.pix.pixelformat = fmt->fourcc;
-- else
-- node->v_fmt.fmt.meta.dataformat = fmt->fourcc;
-- } else {
-- node->v_fmt.fmt.pix.pixelformat = fmt->repacked_fourcc;
-- }
--
-- /* Read current subdev format */
-- unicam_reset_format(node);
--
-- if (v4l2_subdev_has_op(unicam->sensor, video, s_std)) {
-- v4l2_std_id tvnorms;
--
-- if (WARN_ON(!v4l2_subdev_has_op(unicam->sensor, video,
-- g_tvnorms)))
-- /*
-- * Subdevice should not advertise s_std but not
-- * g_tvnorms
-- */
-- return -EINVAL;
--
-- ret = v4l2_subdev_call(unicam->sensor, video,
-- g_tvnorms, &tvnorms);
-- if (WARN_ON(ret))
-- return -EINVAL;
-- node->video_dev.tvnorms |= tvnorms;
-- }
--
-- spin_lock_init(&node->dma_queue_lock);
-- mutex_init(&node->lock);
--
-- vdev = &node->video_dev;
-- if (pad_id == IMAGE_PAD) {
-- /* Add controls from the subdevice */
-- ret = v4l2_ctrl_add_handler(&node->ctrl_handler,
-- unicam->sensor->ctrl_handler, NULL,
-- true);
-- if (ret < 0)
-- return ret;
--
-- /*
-- * If the sensor subdevice has any controls, associate the node
-- * with the ctrl handler to allow access from userland.
-- */
-- if (!list_empty(&node->ctrl_handler.ctrls))
-- vdev->ctrl_handler = &node->ctrl_handler;
-- }
--
-- q = &node->buffer_queue;
-- q->type = type;
-- q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ;
-- q->drv_priv = node;
-- q->ops = &unicam_video_qops;
-- q->mem_ops = &vb2_dma_contig_memops;
-- q->buf_struct_size = sizeof(struct unicam_buffer);
-- q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
-- q->lock = &node->lock;
-- q->min_buffers_needed = 1;
-- q->dev = &unicam->pdev->dev;
--
-- ret = vb2_queue_init(q);
-- if (ret) {
-- unicam_err(unicam, "vb2_queue_init() failed\n");
-- return ret;
-- }
--
-- INIT_LIST_HEAD(&node->dma_queue.active);
--
-- vdev->release = video_device_release_empty;
-- vdev->fops = &unicam_fops;
-- vdev->ioctl_ops = &unicam_ioctl_ops;
-- vdev->v4l2_dev = &unicam->v4l2_dev;
-- vdev->vfl_dir = VFL_DIR_RX;
-- vdev->queue = q;
-- vdev->lock = &node->lock;
-- vdev->device_caps = (pad_id == IMAGE_PAD) ?
-- (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING) :
-- (V4L2_CAP_META_CAPTURE | V4L2_CAP_STREAMING);
--
-- /* Define the device names */
-- snprintf(vdev->name, sizeof(vdev->name), "%s-%s", UNICAM_MODULE_NAME,
-- node->pad_id == IMAGE_PAD ? "image" : "embedded");
--
-- video_set_drvdata(vdev, node);
-- vdev->entity.flags |= MEDIA_ENT_FL_DEFAULT;
--
-- node->dummy_buf_cpu_addr = dma_alloc_coherent(&unicam->pdev->dev,
-- DUMMY_BUF_SIZE,
-- &node->dummy_buf_dma_addr,
-- GFP_ATOMIC);
-- if (!node->dummy_buf_cpu_addr) {
-- unicam_err(unicam, "Unable to allocate dummy buffer.\n");
-- return -ENOMEM;
-- }
--
-- if (node->pad_id == METADATA_PAD) {
-- v4l2_disable_ioctl(vdev, VIDIOC_DQEVENT);
-- v4l2_disable_ioctl(vdev, VIDIOC_SUBSCRIBE_EVENT);
-- v4l2_disable_ioctl(vdev, VIDIOC_UNSUBSCRIBE_EVENT);
-- }
-- if (node->pad_id == METADATA_PAD ||
-- !v4l2_subdev_has_op(unicam->sensor, video, s_std)) {
-- v4l2_disable_ioctl(&node->video_dev, VIDIOC_S_STD);
-- v4l2_disable_ioctl(&node->video_dev, VIDIOC_G_STD);
-- v4l2_disable_ioctl(&node->video_dev, VIDIOC_ENUMSTD);
-- }
-- if (node->pad_id == METADATA_PAD ||
-- !v4l2_subdev_has_op(unicam->sensor, video, querystd))
-- v4l2_disable_ioctl(&node->video_dev, VIDIOC_QUERYSTD);
-- if (node->pad_id == METADATA_PAD ||
-- !v4l2_subdev_has_op(unicam->sensor, video, s_dv_timings)) {
-- v4l2_disable_ioctl(&node->video_dev, VIDIOC_S_EDID);
-- v4l2_disable_ioctl(&node->video_dev, VIDIOC_G_EDID);
-- v4l2_disable_ioctl(&node->video_dev, VIDIOC_DV_TIMINGS_CAP);
-- v4l2_disable_ioctl(&node->video_dev, VIDIOC_G_DV_TIMINGS);
-- v4l2_disable_ioctl(&node->video_dev, VIDIOC_S_DV_TIMINGS);
-- v4l2_disable_ioctl(&node->video_dev, VIDIOC_ENUM_DV_TIMINGS);
-- v4l2_disable_ioctl(&node->video_dev, VIDIOC_QUERY_DV_TIMINGS);
-- }
-- if (node->pad_id == METADATA_PAD ||
-- !v4l2_subdev_has_op(unicam->sensor, pad, enum_frame_interval))
-- v4l2_disable_ioctl(&node->video_dev,
-- VIDIOC_ENUM_FRAMEINTERVALS);
-- if (node->pad_id == METADATA_PAD ||
-- !v4l2_subdev_has_op(unicam->sensor, video, g_frame_interval))
-- v4l2_disable_ioctl(&node->video_dev, VIDIOC_G_PARM);
-- if (node->pad_id == METADATA_PAD ||
-- !v4l2_subdev_has_op(unicam->sensor, video, s_frame_interval))
-- v4l2_disable_ioctl(&node->video_dev, VIDIOC_S_PARM);
--
-- if (node->pad_id == METADATA_PAD ||
-- !v4l2_subdev_has_op(unicam->sensor, pad, enum_frame_size))
-- v4l2_disable_ioctl(&node->video_dev, VIDIOC_ENUM_FRAMESIZES);
--
-- if (node->pad_id == METADATA_PAD ||
-- !v4l2_subdev_has_op(unicam->sensor, pad, set_selection))
-- v4l2_disable_ioctl(&node->video_dev, VIDIOC_S_SELECTION);
--
-- if (node->pad_id == METADATA_PAD ||
-- !v4l2_subdev_has_op(unicam->sensor, pad, get_selection))
-- v4l2_disable_ioctl(&node->video_dev, VIDIOC_G_SELECTION);
--
-- ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1);
-- if (ret) {
-- unicam_err(unicam, "Unable to register video device.\n");
-- return ret;
-- }
-- node->registered = 1;
--
-- if (unicam->sensor_embedded_data) {
-- ret = media_create_pad_link(&unicam->sensor->entity, pad_id,
-- &node->video_dev.entity, 0,
-- MEDIA_LNK_FL_ENABLED |
-- MEDIA_LNK_FL_IMMUTABLE);
-- if (ret)
-- unicam_err(unicam, "Unable to create pad links.\n");
-- }
--
-- return ret;
--}
--
--static void unregister_nodes(struct unicam_device *unicam)
--{
-- struct unicam_node *node;
-- int i;
--
-- for (i = 0; i < MAX_NODES; i++) {
-- node = &unicam->node[i];
-- if (node->dummy_buf_cpu_addr) {
-- dma_free_coherent(&unicam->pdev->dev, DUMMY_BUF_SIZE,
-- node->dummy_buf_cpu_addr,
-- node->dummy_buf_dma_addr);
-- }
-- if (node->registered) {
-- video_unregister_device(&node->video_dev);
-- node->registered = 0;
-- }
-- }
--}
--
--static int unicam_probe_complete(struct unicam_device *unicam)
--{
-- int ret;
--
-- v4l2_set_subdev_hostdata(unicam->sensor, unicam);
--
-- unicam->v4l2_dev.notify = unicam_notify;
--
-- unicam->sensor_config = v4l2_subdev_alloc_pad_config(unicam->sensor);
-- if (!unicam->sensor_config)
-- return -ENOMEM;
--
-- unicam->sensor_embedded_data = (unicam->sensor->entity.num_pads >= 2);
--
-- ret = register_node(unicam, &unicam->node[IMAGE_PAD],
-- V4L2_BUF_TYPE_VIDEO_CAPTURE, IMAGE_PAD);
-- if (ret) {
-- unicam_err(unicam, "Unable to register subdev node 0.\n");
-- goto unregister;
-- }
--
-- ret = register_node(unicam, &unicam->node[METADATA_PAD],
-- V4L2_BUF_TYPE_META_CAPTURE, METADATA_PAD);
-- if (ret) {
-- unicam_err(unicam, "Unable to register subdev node 1.\n");
-- goto unregister;
-- }
--
-- ret = v4l2_device_register_ro_subdev_nodes(&unicam->v4l2_dev);
-- if (ret) {
-- unicam_err(unicam, "Unable to register subdev nodes.\n");
-- goto unregister;
-- }
--
-- return 0;
--
--unregister:
-- unregister_nodes(unicam);
--
-- return ret;
--}
--
--static int unicam_async_complete(struct v4l2_async_notifier *notifier)
--{
-- struct unicam_device *unicam = container_of(notifier->v4l2_dev,
-- struct unicam_device, v4l2_dev);
--
-- return unicam_probe_complete(unicam);
--}
--
--static const struct v4l2_async_notifier_operations unicam_async_ops = {
-- .bound = unicam_async_bound,
-- .complete = unicam_async_complete,
--};
--
--static int of_unicam_connect_subdevs(struct unicam_device *dev)
--{
-- struct platform_device *pdev = dev->pdev;
-- struct device_node *parent, *ep_node = NULL, *remote_ep = NULL,
-- *sensor_node = NULL;
-- struct v4l2_fwnode_endpoint *ep;
-- struct v4l2_async_subdev *asd;
-- unsigned int peripheral_data_lanes;
-- int ret = -EINVAL;
-- unsigned int lane;
--
-- parent = pdev->dev.of_node;
--
-- asd = &dev->asd;
-- ep = &dev->endpoint;
--
-- ep_node = of_graph_get_next_endpoint(parent, NULL);
-- if (!ep_node) {
-- unicam_dbg(3, dev, "can't get next endpoint\n");
-- goto cleanup_exit;
-- }
--
-- unicam_dbg(3, dev, "ep_node is %s\n", ep_node->name);
--
-- v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_node), ep);
--
-- for (lane = 0; lane < ep->bus.mipi_csi2.num_data_lanes; lane++) {
-- if (ep->bus.mipi_csi2.data_lanes[lane] != lane + 1) {
-- unicam_err(dev, "Local endpoint - data lane reordering not supported\n");
-- goto cleanup_exit;
-- }
-- }
--
-- peripheral_data_lanes = ep->bus.mipi_csi2.num_data_lanes;
--
-- sensor_node = of_graph_get_remote_port_parent(ep_node);
-- if (!sensor_node) {
-- unicam_dbg(3, dev, "can't get remote parent\n");
-- goto cleanup_exit;
-- }
-- unicam_dbg(3, dev, "sensor_node is %s\n", sensor_node->name);
-- asd->match_type = V4L2_ASYNC_MATCH_FWNODE;
-- asd->match.fwnode = of_fwnode_handle(sensor_node);
--
-- remote_ep = of_graph_get_remote_endpoint(ep_node);
-- if (!remote_ep) {
-- unicam_dbg(3, dev, "can't get remote-endpoint\n");
-- goto cleanup_exit;
-- }
-- unicam_dbg(3, dev, "remote_ep is %s\n", remote_ep->name);
-- v4l2_fwnode_endpoint_parse(of_fwnode_handle(remote_ep), ep);
-- unicam_dbg(3, dev, "parsed remote_ep to endpoint. nr_of_link_frequencies %u, bus_type %u\n",
-- ep->nr_of_link_frequencies, ep->bus_type);
--
-- switch (ep->bus_type) {
-- case V4L2_MBUS_CSI2_DPHY:
-- if (ep->bus.mipi_csi2.num_data_lanes >
-- peripheral_data_lanes) {
-- unicam_err(dev, "Subdevice %s wants too many data lanes (%u > %u)\n",
-- sensor_node->name,
-- ep->bus.mipi_csi2.num_data_lanes,
-- peripheral_data_lanes);
-- goto cleanup_exit;
-- }
-- for (lane = 0;
-- lane < ep->bus.mipi_csi2.num_data_lanes;
-- lane++) {
-- if (ep->bus.mipi_csi2.data_lanes[lane] != lane + 1) {
-- unicam_err(dev, "Subdevice %s - incompatible data lane config\n",
-- sensor_node->name);
-- goto cleanup_exit;
-- }
-- }
-- dev->max_data_lanes = ep->bus.mipi_csi2.num_data_lanes;
-- dev->bus_flags = ep->bus.mipi_csi2.flags;
-- break;
-- case V4L2_MBUS_CCP2:
-- if (ep->bus.mipi_csi1.clock_lane != 0 ||
-- ep->bus.mipi_csi1.data_lane != 1) {
-- unicam_err(dev, "Subdevice %s incompatible lane config\n",
-- sensor_node->name);
-- goto cleanup_exit;
-- }
-- dev->max_data_lanes = 1;
-- dev->bus_flags = ep->bus.mipi_csi1.strobe;
-- break;
-- default:
-- /* Unsupported bus type */
-- unicam_err(dev, "sub-device %s is not a CSI2 or CCP2 device %d\n",
-- sensor_node->name, ep->bus_type);
-- goto cleanup_exit;
-- }
--
-- /* Store bus type - CSI2 or CCP2 */
-- dev->bus_type = ep->bus_type;
-- unicam_dbg(3, dev, "bus_type is %d\n", dev->bus_type);
--
-- /* Store Virtual Channel number */
-- dev->virtual_channel = ep->base.id;
--
-- unicam_dbg(3, dev, "v4l2-endpoint: %s\n",
-- dev->bus_type == V4L2_MBUS_CSI2_DPHY ? "CSI2" : "CCP2");
-- unicam_dbg(3, dev, "Virtual Channel=%d\n", dev->virtual_channel);
-- if (dev->bus_type == V4L2_MBUS_CSI2_DPHY)
-- unicam_dbg(3, dev, "flags=0x%08x\n", ep->bus.mipi_csi2.flags);
-- unicam_dbg(3, dev, "num_data_lanes=%d\n", dev->max_data_lanes);
--
-- unicam_dbg(1, dev, "found sub-device %s\n", sensor_node->name);
--
-- v4l2_async_notifier_init(&dev->notifier);
--
-- ret = v4l2_async_notifier_add_subdev(&dev->notifier, asd);
-- if (ret) {
-- unicam_err(dev, "Error adding subdevice - ret %d\n", ret);
-- goto cleanup_exit;
-- }
--
-- dev->notifier.ops = &unicam_async_ops;
-- ret = v4l2_async_notifier_register(&dev->v4l2_dev,
-- &dev->notifier);
-- if (ret) {
-- unicam_err(dev, "Error registering async notifier - ret %d\n",
-- ret);
-- ret = -EINVAL;
-- }
--
--cleanup_exit:
-- if (remote_ep)
-- of_node_put(remote_ep);
-- if (sensor_node)
-- of_node_put(sensor_node);
-- if (ep_node)
-- of_node_put(ep_node);
--
-- return ret;
--}
--
--static int unicam_probe(struct platform_device *pdev)
--{
-- struct unicam_cfg *unicam_cfg;
-- struct unicam_device *unicam;
-- struct v4l2_ctrl_handler *hdl;
-- struct resource *res;
-- int ret;
--
-- unicam = devm_kzalloc(&pdev->dev, sizeof(*unicam), GFP_KERNEL);
-- if (!unicam)
-- return -ENOMEM;
--
-- unicam->pdev = pdev;
-- unicam_cfg = &unicam->cfg;
--
-- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-- unicam_cfg->base = devm_ioremap_resource(&pdev->dev, res);
-- if (IS_ERR(unicam_cfg->base)) {
-- unicam_err(unicam, "Failed to get main io block\n");
-- return PTR_ERR(unicam_cfg->base);
-- }
--
-- res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-- unicam_cfg->clk_gate_base = devm_ioremap_resource(&pdev->dev, res);
-- if (IS_ERR(unicam_cfg->clk_gate_base)) {
-- unicam_err(unicam, "Failed to get 2nd io block\n");
-- return PTR_ERR(unicam_cfg->clk_gate_base);
-- }
--
-- unicam->clock = devm_clk_get(&pdev->dev, "lp");
-- if (IS_ERR(unicam->clock)) {
-- unicam_err(unicam, "Failed to get clock\n");
-- return PTR_ERR(unicam->clock);
-- }
--
-- ret = platform_get_irq(pdev, 0);
-- if (ret <= 0) {
-- dev_err(&pdev->dev, "No IRQ resource\n");
-- return -ENODEV;
-- }
--
-- ret = devm_request_irq(&pdev->dev, ret, unicam_isr, 0,
-- "unicam_capture0", unicam);
-- if (ret) {
-- dev_err(&pdev->dev, "Unable to request interrupt\n");
-- return -EINVAL;
-- }
--
-- unicam->mdev.dev = &pdev->dev;
-- strscpy(unicam->mdev.model, UNICAM_MODULE_NAME,
-- sizeof(unicam->mdev.model));
-- strscpy(unicam->mdev.serial, "", sizeof(unicam->mdev.serial));
-- snprintf(unicam->mdev.bus_info, sizeof(unicam->mdev.bus_info),
-- "platform:%s %s",
-- pdev->dev.driver->name, dev_name(&pdev->dev));
-- unicam->mdev.hw_revision = 1;
--
-- media_entity_pads_init(&unicam->node[IMAGE_PAD].video_dev.entity, 1,
-- &unicam->node[IMAGE_PAD].pad);
-- media_entity_pads_init(&unicam->node[METADATA_PAD].video_dev.entity, 1,
-- &unicam->node[METADATA_PAD].pad);
-- media_device_init(&unicam->mdev);
--
-- unicam->v4l2_dev.mdev = &unicam->mdev;
--
-- ret = v4l2_device_register(&pdev->dev, &unicam->v4l2_dev);
-- if (ret) {
-- unicam_err(unicam,
-- "Unable to register v4l2 device.\n");
-- goto media_cleanup;
-- }
--
-- ret = media_device_register(&unicam->mdev);
-- if (ret < 0) {
-- unicam_err(unicam,
-- "Unable to register media-controller device.\n");
-- goto probe_out_v4l2_unregister;
-- }
--
-- /* Reserve space for the controls */
-- hdl = &unicam->node[IMAGE_PAD].ctrl_handler;
-- ret = v4l2_ctrl_handler_init(hdl, 16);
-- if (ret < 0)
-- goto media_unregister;
--
-- /* set the driver data in platform device */
-- platform_set_drvdata(pdev, unicam);
--
-- ret = of_unicam_connect_subdevs(unicam);
-- if (ret) {
-- dev_err(&pdev->dev, "Failed to connect subdevs\n");
-- goto free_hdl;
-- }
--
-- /* Enable the block power domain */
-- pm_runtime_enable(&pdev->dev);
--
-- return 0;
--
--free_hdl:
-- v4l2_ctrl_handler_free(hdl);
--media_unregister:
-- media_device_unregister(&unicam->mdev);
--probe_out_v4l2_unregister:
-- v4l2_device_unregister(&unicam->v4l2_dev);
--media_cleanup:
-- media_device_cleanup(&unicam->mdev);
--
-- return ret;
--}
--
--static int unicam_remove(struct platform_device *pdev)
--{
-- struct unicam_device *unicam = platform_get_drvdata(pdev);
--
-- unicam_dbg(2, unicam, "%s\n", __func__);
--
-- pm_runtime_disable(&pdev->dev);
--
-- v4l2_async_notifier_unregister(&unicam->notifier);
-- v4l2_ctrl_handler_free(&unicam->node[IMAGE_PAD].ctrl_handler);
-- v4l2_device_unregister(&unicam->v4l2_dev);
-- unregister_nodes(unicam);
-- if (unicam->sensor_config)
-- v4l2_subdev_free_pad_config(unicam->sensor_config);
-- media_device_unregister(&unicam->mdev);
-- media_device_cleanup(&unicam->mdev);
--
-- return 0;
--}
--
--static const struct of_device_id unicam_of_match[] = {
-- { .compatible = "brcm,bcm2835-unicam", },
-- { /* sentinel */ },
--};
--MODULE_DEVICE_TABLE(of, unicam_of_match);
--
--static struct platform_driver unicam_driver = {
-- .probe = unicam_probe,
-- .remove = unicam_remove,
-- .driver = {
-- .name = UNICAM_MODULE_NAME,
-- .of_match_table = of_match_ptr(unicam_of_match),
-- },
--};
--
--module_platform_driver(unicam_driver);
--
--MODULE_AUTHOR("Dave Stevenson <dave.stevenson@raspberrypi.com>");
--MODULE_DESCRIPTION("BCM2835 Unicam driver");
--MODULE_LICENSE("GPL");
--MODULE_VERSION(UNICAM_VERSION);
---- a/drivers/media/platform/bcm2835/vc4-regs-unicam.h
-+++ /dev/null
-@@ -1,253 +0,0 @@
--/* SPDX-License-Identifier: GPL-2.0-only */
--
--/*
-- * Copyright (C) 2017-2020 Raspberry Pi Trading.
-- * Dave Stevenson <dave.stevenson@raspberrypi.com>
-- */
--
--#ifndef VC4_REGS_UNICAM_H
--#define VC4_REGS_UNICAM_H
--
--/*
-- * The following values are taken from files found within the code drop
-- * made by Broadcom for the BCM21553 Graphics Driver, predominantly in
-- * brcm_usrlib/dag/vmcsx/vcinclude/hardware_vc4.h.
-- * They have been modified to be only the register offset.
-- */
--#define UNICAM_CTRL 0x000
--#define UNICAM_STA 0x004
--#define UNICAM_ANA 0x008
--#define UNICAM_PRI 0x00c
--#define UNICAM_CLK 0x010
--#define UNICAM_CLT 0x014
--#define UNICAM_DAT0 0x018
--#define UNICAM_DAT1 0x01c
--#define UNICAM_DAT2 0x020
--#define UNICAM_DAT3 0x024
--#define UNICAM_DLT 0x028
--#define UNICAM_CMP0 0x02c
--#define UNICAM_CMP1 0x030
--#define UNICAM_CAP0 0x034
--#define UNICAM_CAP1 0x038
--#define UNICAM_ICTL 0x100
--#define UNICAM_ISTA 0x104
--#define UNICAM_IDI0 0x108
--#define UNICAM_IPIPE 0x10c
--#define UNICAM_IBSA0 0x110
--#define UNICAM_IBEA0 0x114
--#define UNICAM_IBLS 0x118
--#define UNICAM_IBWP 0x11c
--#define UNICAM_IHWIN 0x120
--#define UNICAM_IHSTA 0x124
--#define UNICAM_IVWIN 0x128
--#define UNICAM_IVSTA 0x12c
--#define UNICAM_ICC 0x130
--#define UNICAM_ICS 0x134
--#define UNICAM_IDC 0x138
--#define UNICAM_IDPO 0x13c
--#define UNICAM_IDCA 0x140
--#define UNICAM_IDCD 0x144
--#define UNICAM_IDS 0x148
--#define UNICAM_DCS 0x200
--#define UNICAM_DBSA0 0x204
--#define UNICAM_DBEA0 0x208
--#define UNICAM_DBWP 0x20c
--#define UNICAM_DBCTL 0x300
--#define UNICAM_IBSA1 0x304
--#define UNICAM_IBEA1 0x308
--#define UNICAM_IDI1 0x30c
--#define UNICAM_DBSA1 0x310
--#define UNICAM_DBEA1 0x314
--#define UNICAM_MISC 0x400
--
--/*
-- * The following bitmasks are from the kernel released by Broadcom
-- * for Android - https://android.googlesource.com/kernel/bcm/
-- * The Rhea, Hawaii, and Java chips all contain the same VideoCore4
-- * Unicam block as BCM2835, as defined in eg
-- * arch/arm/mach-rhea/include/mach/rdb_A0/brcm_rdb_cam.h and similar.
-- * Values reworked to use the kernel BIT and GENMASK macros.
-- *
-- * Some of the bit mnenomics have been amended to match the datasheet.
-- */
--/* UNICAM_CTRL Register */
--#define UNICAM_CPE BIT(0)
--#define UNICAM_MEM BIT(1)
--#define UNICAM_CPR BIT(2)
--#define UNICAM_CPM_MASK GENMASK(3, 3)
--#define UNICAM_CPM_CSI2 0
--#define UNICAM_CPM_CCP2 1
--#define UNICAM_SOE BIT(4)
--#define UNICAM_DCM_MASK GENMASK(5, 5)
--#define UNICAM_DCM_STROBE 0
--#define UNICAM_DCM_DATA 1
--#define UNICAM_SLS BIT(6)
--#define UNICAM_PFT_MASK GENMASK(11, 8)
--#define UNICAM_OET_MASK GENMASK(20, 12)
--
--/* UNICAM_STA Register */
--#define UNICAM_SYN BIT(0)
--#define UNICAM_CS BIT(1)
--#define UNICAM_SBE BIT(2)
--#define UNICAM_PBE BIT(3)
--#define UNICAM_HOE BIT(4)
--#define UNICAM_PLE BIT(5)
--#define UNICAM_SSC BIT(6)
--#define UNICAM_CRCE BIT(7)
--#define UNICAM_OES BIT(8)
--#define UNICAM_IFO BIT(9)
--#define UNICAM_OFO BIT(10)
--#define UNICAM_BFO BIT(11)
--#define UNICAM_DL BIT(12)
--#define UNICAM_PS BIT(13)
--#define UNICAM_IS BIT(14)
--#define UNICAM_PI0 BIT(15)
--#define UNICAM_PI1 BIT(16)
--#define UNICAM_FSI_S BIT(17)
--#define UNICAM_FEI_S BIT(18)
--#define UNICAM_LCI_S BIT(19)
--#define UNICAM_BUF0_RDY BIT(20)
--#define UNICAM_BUF0_NO BIT(21)
--#define UNICAM_BUF1_RDY BIT(22)
--#define UNICAM_BUF1_NO BIT(23)
--#define UNICAM_DI BIT(24)
--
--#define UNICAM_STA_MASK_ALL \
-- (UNICAM_DL + \
-- UNICAM_SBE + \
-- UNICAM_PBE + \
-- UNICAM_HOE + \
-- UNICAM_PLE + \
-- UNICAM_SSC + \
-- UNICAM_CRCE + \
-- UNICAM_IFO + \
-- UNICAM_OFO + \
-- UNICAM_PS + \
-- UNICAM_PI0 + \
-- UNICAM_PI1)
--
--/* UNICAM_ANA Register */
--#define UNICAM_APD BIT(0)
--#define UNICAM_BPD BIT(1)
--#define UNICAM_AR BIT(2)
--#define UNICAM_DDL BIT(3)
--#define UNICAM_CTATADJ_MASK GENMASK(7, 4)
--#define UNICAM_PTATADJ_MASK GENMASK(11, 8)
--
--/* UNICAM_PRI Register */
--#define UNICAM_PE BIT(0)
--#define UNICAM_PT_MASK GENMASK(2, 1)
--#define UNICAM_NP_MASK GENMASK(7, 4)
--#define UNICAM_PP_MASK GENMASK(11, 8)
--#define UNICAM_BS_MASK GENMASK(15, 12)
--#define UNICAM_BL_MASK GENMASK(17, 16)
--
--/* UNICAM_CLK Register */
--#define UNICAM_CLE BIT(0)
--#define UNICAM_CLPD BIT(1)
--#define UNICAM_CLLPE BIT(2)
--#define UNICAM_CLHSE BIT(3)
--#define UNICAM_CLTRE BIT(4)
--#define UNICAM_CLAC_MASK GENMASK(8, 5)
--#define UNICAM_CLSTE BIT(29)
--
--/* UNICAM_CLT Register */
--#define UNICAM_CLT1_MASK GENMASK(7, 0)
--#define UNICAM_CLT2_MASK GENMASK(15, 8)
--
--/* UNICAM_DATn Registers */
--#define UNICAM_DLE BIT(0)
--#define UNICAM_DLPD BIT(1)
--#define UNICAM_DLLPE BIT(2)
--#define UNICAM_DLHSE BIT(3)
--#define UNICAM_DLTRE BIT(4)
--#define UNICAM_DLSM BIT(5)
--#define UNICAM_DLFO BIT(28)
--#define UNICAM_DLSTE BIT(29)
--
--#define UNICAM_DAT_MASK_ALL (UNICAM_DLSTE + UNICAM_DLFO)
--
--/* UNICAM_DLT Register */
--#define UNICAM_DLT1_MASK GENMASK(7, 0)
--#define UNICAM_DLT2_MASK GENMASK(15, 8)
--#define UNICAM_DLT3_MASK GENMASK(23, 16)
--
--/* UNICAM_ICTL Register */
--#define UNICAM_FSIE BIT(0)
--#define UNICAM_FEIE BIT(1)
--#define UNICAM_IBOB BIT(2)
--#define UNICAM_FCM BIT(3)
--#define UNICAM_TFC BIT(4)
--#define UNICAM_LIP_MASK GENMASK(6, 5)
--#define UNICAM_LCIE_MASK GENMASK(28, 16)
--
--/* UNICAM_IDI0/1 Register */
--#define UNICAM_ID0_MASK GENMASK(7, 0)
--#define UNICAM_ID1_MASK GENMASK(15, 8)
--#define UNICAM_ID2_MASK GENMASK(23, 16)
--#define UNICAM_ID3_MASK GENMASK(31, 24)
--
--/* UNICAM_ISTA Register */
--#define UNICAM_FSI BIT(0)
--#define UNICAM_FEI BIT(1)
--#define UNICAM_LCI BIT(2)
--
--#define UNICAM_ISTA_MASK_ALL (UNICAM_FSI + UNICAM_FEI + UNICAM_LCI)
--
--/* UNICAM_IPIPE Register */
--#define UNICAM_PUM_MASK GENMASK(2, 0)
-- /* Unpacking modes */
-- #define UNICAM_PUM_NONE 0
-- #define UNICAM_PUM_UNPACK6 1
-- #define UNICAM_PUM_UNPACK7 2
-- #define UNICAM_PUM_UNPACK8 3
-- #define UNICAM_PUM_UNPACK10 4
-- #define UNICAM_PUM_UNPACK12 5
-- #define UNICAM_PUM_UNPACK14 6
-- #define UNICAM_PUM_UNPACK16 7
--#define UNICAM_DDM_MASK GENMASK(6, 3)
--#define UNICAM_PPM_MASK GENMASK(9, 7)
-- /* Packing modes */
-- #define UNICAM_PPM_NONE 0
-- #define UNICAM_PPM_PACK8 1
-- #define UNICAM_PPM_PACK10 2
-- #define UNICAM_PPM_PACK12 3
-- #define UNICAM_PPM_PACK14 4
-- #define UNICAM_PPM_PACK16 5
--#define UNICAM_DEM_MASK GENMASK(11, 10)
--#define UNICAM_DEBL_MASK GENMASK(14, 12)
--#define UNICAM_ICM_MASK GENMASK(16, 15)
--#define UNICAM_IDM_MASK GENMASK(17, 17)
--
--/* UNICAM_ICC Register */
--#define UNICAM_ICFL_MASK GENMASK(4, 0)
--#define UNICAM_ICFH_MASK GENMASK(9, 5)
--#define UNICAM_ICST_MASK GENMASK(12, 10)
--#define UNICAM_ICLT_MASK GENMASK(15, 13)
--#define UNICAM_ICLL_MASK GENMASK(31, 16)
--
--/* UNICAM_DCS Register */
--#define UNICAM_DIE BIT(0)
--#define UNICAM_DIM BIT(1)
--#define UNICAM_DBOB BIT(3)
--#define UNICAM_FDE BIT(4)
--#define UNICAM_LDP BIT(5)
--#define UNICAM_EDL_MASK GENMASK(15, 8)
--
--/* UNICAM_DBCTL Register */
--#define UNICAM_DBEN BIT(0)
--#define UNICAM_BUF0_IE BIT(1)
--#define UNICAM_BUF1_IE BIT(2)
--
--/* UNICAM_CMP[0,1] register */
--#define UNICAM_PCE BIT(31)
--#define UNICAM_GI BIT(9)
--#define UNICAM_CPH BIT(8)
--#define UNICAM_PCVC_MASK GENMASK(7, 6)
--#define UNICAM_PCDT_MASK GENMASK(5, 0)
--
--/* UNICAM_MISC register */
--#define UNICAM_FL0 BIT(6)
--#define UNICAM_FL1 BIT(9)
--
--#endif
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-23 02:38:13 +0000