diff options
Diffstat (limited to 'target/linux/bcm27xx/patches-5.4/950-0712-dt-bindings-media-i2c-Add-IMX477-CMOS-sensor-binding.patch')
| -rw-r--r-- | target/linux/bcm27xx/patches-5.4/950-0712-dt-bindings-media-i2c-Add-IMX477-CMOS-sensor-binding.patch | 130 |
1 files changed, 0 insertions, 130 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0712-dt-bindings-media-i2c-Add-IMX477-CMOS-sensor-binding.patch b/target/linux/bcm27xx/patches-5.4/950-0712-dt-bindings-media-i2c-Add-IMX477-CMOS-sensor-binding.patch deleted file mode 100644 index eb5430bbae..0000000000 --- a/target/linux/bcm27xx/patches-5.4/950-0712-dt-bindings-media-i2c-Add-IMX477-CMOS-sensor-binding.patch +++ /dev/null @@ -1,130 +0,0 @@ -From 87038c8d2337bd2c79bd96ac1ef9e6471a782331 Mon Sep 17 00:00:00 2001 -From: Naushir Patuck <naush@raspberrypi.com> -Date: Thu, 7 May 2020 15:50:54 +0100 -Subject: [PATCH] dt-bindings: media: i2c: Add IMX477 CMOS sensor - binding - -Add YAML device tree binding for IMX477 CMOS image sensor. - -Signed-off-by: Naushir Patuck <naush@raspberrypi.com> ---- - .../devicetree/bindings/media/i2c/imx477.yaml | 113 ++++++++++++++++++ - 1 file changed, 113 insertions(+) - create mode 100644 Documentation/devicetree/bindings/media/i2c/imx477.yaml - ---- /dev/null -+++ b/Documentation/devicetree/bindings/media/i2c/imx477.yaml -@@ -0,0 +1,113 @@ -+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/media/i2c/imx477.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: Sony 1/2.3-Inch 12Mpixel CMOS Digital Image Sensor -+ -+maintainers: -+ - Naushir Patuck <naush@raspberypi.com> -+ -+description: |- -+ The Sony IMX477 is a 1/2.3-inch CMOS active pixel digital image sensor -+ with an active array size of 4056H x 3040V. It is programmable through -+ I2C interface. The I2C address is fixed to 0x1A as per sensor data sheet. -+ Image data is sent through MIPI CSI-2, which is configured as either 2 or -+ 4 data lanes. -+ -+properties: -+ compatible: -+ const: sony,imx477 -+ -+ reg: -+ description: I2C device address -+ maxItems: 1 -+ -+ clocks: -+ maxItems: 1 -+ -+ VDIG-supply: -+ description: -+ Digital I/O voltage supply, 1.05 volts -+ -+ VANA-supply: -+ description: -+ Analog voltage supply, 2.8 volts -+ -+ VDDL-supply: -+ description: -+ Digital core voltage supply, 1.8 volts -+ -+ reset-gpios: -+ description: |- -+ Reference to the GPIO connected to the xclr pin, if any. -+ Must be released (set high) after all all supplies and INCK are applied. -+ -+ # See ../video-interfaces.txt for more details -+ port: -+ type: object -+ properties: -+ endpoint: -+ type: object -+ properties: -+ data-lanes: -+ description: |- -+ The sensor supports either two-lane, or four-lane operation. -+ For two-lane operation the property must be set to <1 2>. -+ items: -+ - const: 1 -+ - const: 2 -+ -+ clock-noncontinuous: -+ type: boolean -+ description: |- -+ MIPI CSI-2 clock is non-continuous if this property is present, -+ otherwise it's continuous. -+ -+ link-frequencies: -+ allOf: -+ - $ref: /schemas/types.yaml#/definitions/uint64-array -+ description: -+ Allowed data bus frequencies. -+ -+ required: -+ - link-frequencies -+ -+required: -+ - compatible -+ - reg -+ - clocks -+ - VANA-supply -+ - VDIG-supply -+ - VDDL-supply -+ - port -+ -+additionalProperties: false -+ -+examples: -+ - | -+ i2c0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ imx477: sensor@10 { -+ compatible = "sony,imx477"; -+ reg = <0x1a>; -+ clocks = <&imx477_clk>; -+ VANA-supply = <&imx477_vana>; /* 2.8v */ -+ VDIG-supply = <&imx477_vdig>; /* 1.05v */ -+ VDDL-supply = <&imx477_vddl>; /* 1.8v */ -+ -+ port { -+ imx477_0: endpoint { -+ remote-endpoint = <&csi1_ep>; -+ data-lanes = <1 2>; -+ clock-noncontinuous; -+ link-frequencies = /bits/ 64 <450000000>; -+ }; -+ }; -+ }; -+ }; -+ -+... |